From 19f5e9e015675fcdbf2c20e804b2e84e80201454 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Mon, 20 Aug 2018 10:54:44 +0200 Subject: mmc: atmel-mci: fix bad logic of sg_copy_{from,to}_buffer conversion The conversion to sg_copy_{from,to}_buffer has been done in the wrong way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so it can't replace memcpy(buf + offset, &value, remaining) where buf is the virtual address of the SG. Same for sg_copy_to_buffer but in the opposite way. Signed-off-by: Ludovic Desroches Suggested-by: Douglas Gilbert Fixes: 5b4277814e3f ("mmc: atmel-mci: use sg_copy_{from,to}_buffer") Signed-off-by: Ulf Hansson --- drivers/mmc/host/atmel-mci.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index 5aa2c9404e92..be53044086c7 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -1976,7 +1976,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) do { value = atmci_readl(host, ATMCI_RDR); if (likely(offset + 4 <= sg->length)) { - sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset); + sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset); offset += 4; nbytes += 4; @@ -1993,7 +1993,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) } else { unsigned int remaining = sg->length - offset; - sg_pcopy_to_buffer(sg, 1, &value, remaining, offset); + sg_pcopy_from_buffer(sg, 1, &value, remaining, offset); nbytes += remaining; flush_dcache_page(sg_page(sg)); @@ -2003,7 +2003,7 @@ static void atmci_read_data_pio(struct atmel_mci *host) goto done; offset = 4 - remaining; - sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining, + sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining, offset, 0); nbytes += offset; } @@ -2042,7 +2042,7 @@ static void atmci_write_data_pio(struct atmel_mci *host) do { if (likely(offset + 4 <= sg->length)) { - sg_pcopy_from_buffer(sg, 1, &value, sizeof(u32), offset); + sg_pcopy_to_buffer(sg, 1, &value, sizeof(u32), offset); atmci_writel(host, ATMCI_TDR, value); offset += 4; @@ -2059,7 +2059,7 @@ static void atmci_write_data_pio(struct atmel_mci *host) unsigned int remaining = sg->length - offset; value = 0; - sg_pcopy_from_buffer(sg, 1, &value, remaining, offset); + sg_pcopy_to_buffer(sg, 1, &value, remaining, offset); nbytes += remaining; host->sg = sg = sg_next(sg); @@ -2070,7 +2070,7 @@ static void atmci_write_data_pio(struct atmel_mci *host) } offset = 4 - remaining; - sg_pcopy_from_buffer(sg, 1, (u8 *)&value + remaining, + sg_pcopy_to_buffer(sg, 1, (u8 *)&value + remaining, offset, 0); atmci_writel(host, ATMCI_TDR, value); nbytes += offset; -- cgit v1.2.3-70-g09d2 From 17e96d8516e31c3cb52cb8e2ee79d1d2e6948c11 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Mon, 20 Aug 2018 10:54:45 +0200 Subject: mmc: android-goldfish: fix bad logic of sg_copy_{from,to}_buffer conversion The conversion to sg_copy_{from,to}_buffer has been done in the wrong way. sg_copy_to_buffer is a copy from an SG list to a linear buffer so it can't replace memcpy(dest, host->virt_base, data->sg->length) where dest is the virtual address of the SG. Same for sg_copy_from_buffer but in the opposite way. Signed-off-by: Ludovic Desroches Suggested-by: Douglas Gilbert Fixes: 53d7e098ba08 ("mmc: android-goldfish: use sg_copy_{from,to}_buffer") Signed-off-by: Ulf Hansson --- drivers/mmc/host/android-goldfish.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/android-goldfish.c b/drivers/mmc/host/android-goldfish.c index 294de177632c..61e4e2a213c9 100644 --- a/drivers/mmc/host/android-goldfish.c +++ b/drivers/mmc/host/android-goldfish.c @@ -217,7 +217,7 @@ static void goldfish_mmc_xfer_done(struct goldfish_mmc_host *host, * We don't really have DMA, so we need * to copy from our platform driver buffer */ - sg_copy_to_buffer(data->sg, 1, host->virt_base, + sg_copy_from_buffer(data->sg, 1, host->virt_base, data->sg->length); } host->data->bytes_xfered += data->sg->length; @@ -393,7 +393,7 @@ static void goldfish_mmc_prepare_data(struct goldfish_mmc_host *host, * We don't really have DMA, so we need to copy to our * platform driver buffer */ - sg_copy_from_buffer(data->sg, 1, host->virt_base, + sg_copy_to_buffer(data->sg, 1, host->virt_base, data->sg->length); } } -- cgit v1.2.3-70-g09d2 From 26caddf274cf1e89fd4ce44ab2b8dbc7a7f97681 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Tue, 21 Aug 2018 15:05:55 +0300 Subject: mmc: block: Fix unsupported parallel dispatch of requests The mmc block driver does not support parallel dispatch of requests. In normal circumstances, all requests are anyway funneled through a single work item, so parallel dispatch never happens. However it can happen if there is no elevator. Fix that by detecting if a dispatch is in progress and returning busy (BLK_STS_RESOURCE) in that case Fixes: 81196976ed94 ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson --- drivers/mmc/core/queue.c | 12 +++++++----- drivers/mmc/core/queue.h | 1 + 2 files changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/core/queue.c b/drivers/mmc/core/queue.c index 648eb6743ed5..6edffeed9953 100644 --- a/drivers/mmc/core/queue.c +++ b/drivers/mmc/core/queue.c @@ -238,10 +238,6 @@ static void mmc_mq_exit_request(struct blk_mq_tag_set *set, struct request *req, mmc_exit_request(mq->queue, req); } -/* - * We use BLK_MQ_F_BLOCKING and have only 1 hardware queue, which means requests - * will not be dispatched in parallel. - */ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, const struct blk_mq_queue_data *bd) { @@ -264,7 +260,7 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, spin_lock_irq(q->queue_lock); - if (mq->recovery_needed) { + if (mq->recovery_needed || mq->busy) { spin_unlock_irq(q->queue_lock); return BLK_STS_RESOURCE; } @@ -291,6 +287,9 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, break; } + /* Parallel dispatch of requests is not supported at the moment */ + mq->busy = true; + mq->in_flight[issue_type] += 1; get_card = (mmc_tot_in_flight(mq) == 1); cqe_retune_ok = (mmc_cqe_qcnt(mq) == 1); @@ -333,9 +332,12 @@ static blk_status_t mmc_mq_queue_rq(struct blk_mq_hw_ctx *hctx, mq->in_flight[issue_type] -= 1; if (mmc_tot_in_flight(mq) == 0) put_card = true; + mq->busy = false; spin_unlock_irq(q->queue_lock); if (put_card) mmc_put_card(card, &mq->ctx); + } else { + WRITE_ONCE(mq->busy, false); } return ret; diff --git a/drivers/mmc/core/queue.h b/drivers/mmc/core/queue.h index 17e59d50b496..9bf3c9245075 100644 --- a/drivers/mmc/core/queue.h +++ b/drivers/mmc/core/queue.h @@ -81,6 +81,7 @@ struct mmc_queue { unsigned int cqe_busy; #define MMC_CQE_DCMD_BUSY BIT(0) #define MMC_CQE_QUEUE_FULL BIT(1) + bool busy; bool use_cqe; bool recovery_needed; bool in_recovery; -- cgit v1.2.3-70-g09d2 From 9faf870e559a710c44e747ba20383ea82d8ac5d2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 22 Aug 2018 21:28:01 +0300 Subject: mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits 32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS. Signed-off-by: Sergei Shtylyov Reviewed-by: Wolfram Sang Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index 35cc0de6be67..f16677f424b9 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -45,7 +45,7 @@ /* DM_CM_RST */ #define RST_DTRANRST1 BIT(9) #define RST_DTRANRST0 BIT(8) -#define RST_RESERVED_BITS GENMASK_ULL(32, 0) +#define RST_RESERVED_BITS GENMASK_ULL(31, 0) /* DM_CM_INFO1 and DM_CM_INFO1_MASK */ #define INFO1_CLEAR 0 -- cgit v1.2.3-70-g09d2 From d2332f887ddfba50fee93b8e1736376517c2df0c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 22 Aug 2018 21:22:26 +0300 Subject: mmc: renesas_sdhi_internal_dmac: mask DMAC interrupts I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the SDHI DMA interrupts enabled while the Linux driver didn't use those. Masking those interrupts in renesas_sdhi_internal_dmac_request_dma() gets rid of both issues... Signed-off-by: Sergei Shtylyov Reviewed-by: Wolfram Sang Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ulf Hansson --- drivers/mmc/host/renesas_sdhi_internal_dmac.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/mmc/host/renesas_sdhi_internal_dmac.c b/drivers/mmc/host/renesas_sdhi_internal_dmac.c index f16677f424b9..ca0b43973769 100644 --- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c +++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c @@ -49,10 +49,12 @@ /* DM_CM_INFO1 and DM_CM_INFO1_MASK */ #define INFO1_CLEAR 0 +#define INFO1_MASK_CLEAR GENMASK_ULL(31, 0) #define INFO1_DTRANEND1 BIT(17) #define INFO1_DTRANEND0 BIT(16) /* DM_CM_INFO2 and DM_CM_INFO2_MASK */ +#define INFO2_MASK_CLEAR GENMASK_ULL(31, 0) #define INFO2_DTRANERR1 BIT(17) #define INFO2_DTRANERR0 BIT(16) @@ -252,6 +254,12 @@ renesas_sdhi_internal_dmac_request_dma(struct tmio_mmc_host *host, { struct renesas_sdhi *priv = host_to_priv(host); + /* Disable DMAC interrupts, we don't use them */ + renesas_sdhi_internal_dmac_dm_write(host, DM_CM_INFO1_MASK, + INFO1_MASK_CLEAR); + renesas_sdhi_internal_dmac_dm_write(host, DM_CM_INFO2_MASK, + INFO2_MASK_CLEAR); + /* Each value is set to non-zero to assume "enabling" each DMA */ host->chan_rx = host->chan_tx = (void *)0xdeadbeaf; -- cgit v1.2.3-70-g09d2