From 71c5e83bcf1e795e28a9dae6b1e74095452bf26e Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Thu, 14 Nov 2019 10:32:39 +0800 Subject: net: hns3: add compatible handling for MAC VLAN switch parameter configuration Previously, hns3 driver just directly send specific setting bit and mask bits of MAC VLAN switch parameter to the firmware, it can not be compatible with the old firmware, because the old one ignores mask bits and covers all bits with new setting bits. So when running with old firmware, the communication between PF and VF will fail after resetting or configuring spoof check, since they will do the MAC VLAN switch parameter configuration. This patch fixes this problem by reading switch parameter firstly, then just modifies the corresponding bit and sends it to firmware. Fixes: dd2956eab104 ("net: hns3: not allow SSU loopback while execute ethtool -t dev") Signed-off-by: Guangbin Huang Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 16f7d0e15b4f..c052bb33b3d3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -6263,11 +6263,23 @@ static int hclge_config_switch_param(struct hclge_dev *hdev, int vfid, func_id = hclge_get_port_number(HOST_PORT, 0, vfid, 0); req = (struct hclge_mac_vlan_switch_cmd *)desc.data; + + /* read current config parameter */ hclge_cmd_setup_basic_desc(&desc, HCLGE_OPC_MAC_VLAN_SWITCH_PARAM, - false); + true); req->roce_sel = HCLGE_MAC_VLAN_NIC_SEL; req->func_id = cpu_to_le32(func_id); - req->switch_param = switch_param; + + ret = hclge_cmd_send(&hdev->hw, &desc, 1); + if (ret) { + dev_err(&hdev->pdev->dev, + "read mac vlan switch parameter fail, ret = %d\n", ret); + return ret; + } + + /* modify and write new config parameter */ + hclge_cmd_reuse_desc(&desc, false); + req->switch_param = (req->switch_param & param_mask) | switch_param; req->param_mask = param_mask; ret = hclge_cmd_send(&hdev->hw, &desc, 1); -- cgit v1.2.3-70-g09d2 From aea8cfb35a82d6c2f3517c86694933ba766635e5 Mon Sep 17 00:00:00 2001 From: Yunsheng Lin Date: Thu, 14 Nov 2019 10:32:40 +0800 Subject: net: hns3: reallocate SSU' buffer size when pfc_en changes When a TC's PFC is disabled or enabled, the RX private buffer for this TC need to be changed too, otherwise this may cause packet dropped problem. This patch fixes it by calling hclge_buffer_alloc to reallocate buffer when pfc_en changes. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Yunsheng Lin Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index c063301d6060..8b42caed14fd 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -318,6 +318,7 @@ static int hclge_ieee_setpfc(struct hnae3_handle *h, struct ieee_pfc *pfc) struct net_device *netdev = h->kinfo.netdev; struct hclge_dev *hdev = vport->back; u8 i, j, pfc_map, *prio_tc; + int ret; if (!(hdev->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) || hdev->flag & HCLGE_FLAG_MQPRIO_ENABLE) @@ -347,7 +348,21 @@ static int hclge_ieee_setpfc(struct hnae3_handle *h, struct ieee_pfc *pfc) hclge_tm_pfc_info_update(hdev); - return hclge_pause_setup_hw(hdev, false); + ret = hclge_pause_setup_hw(hdev, false); + if (ret) + return ret; + + ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + return ret; + + ret = hclge_buffer_alloc(hdev); + if (ret) { + hclge_notify_client(hdev, HNAE3_UP_CLIENT); + return ret; + } + + return hclge_notify_client(hdev, HNAE3_UP_CLIENT); } /* DCBX configuration */ -- cgit v1.2.3-70-g09d2 From c2d56897819338eb0ba8b93184f7d10329b36653 Mon Sep 17 00:00:00 2001 From: Yonglong Liu Date: Thu, 14 Nov 2019 10:32:41 +0800 Subject: net: hns3: fix ETS bandwidth validation bug Some device only support 4 TCs, but the driver check the total bandwidth of 8 TCs, so may cause wrong configurations write to the hw. This patch uses hdev->tc_max to instead HNAE3_MAX_TC to fix it. Fixes: e432abfb99e5 ("net: hns3: add common validation in hclge_dcb") Signed-off-by: Yonglong Liu Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c index 8b42caed14fd..a1790af73096 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c @@ -124,7 +124,7 @@ static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets, if (ret) return ret; - for (i = 0; i < HNAE3_MAX_TC; i++) { + for (i = 0; i < hdev->tc_max; i++) { switch (ets->tc_tsa[i]) { case IEEE_8021QAZ_TSA_STRICT: if (hdev->tm_info.tc_info[i].tc_sch_mode != -- cgit v1.2.3-70-g09d2