From 2fdb11449ca82f4f1907fce4929df4e0bd267c50 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Sun, 12 Apr 2009 08:14:46 +0100 Subject: mtd: mtd in mtd_release is unused without CONFIG_MTD_CHAR drivers/mtd/mtdcore.c: In function 'mtd_release': drivers/mtd/mtdcore.c:51: warning: unused variable 'mtd' [akpm: make it actually build] Signed-off-by: Denis V. Lunev Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index fdd6ae859397..051b4d4ed21f 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -48,11 +48,11 @@ static LIST_HEAD(mtd_notifiers); */ static void mtd_release(struct device *dev) { - struct mtd_info *mtd = dev_to_mtd(dev); + dev_t index = MTD_DEVT(dev_to_mtd(dev)->index); /* remove /dev/mtdXro node if needed */ - if (MTD_DEVT(mtd->index)) - device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1); + if (index) + device_destroy(mtd_class, index + 1); } static ssize_t mtd_type_show(struct device *dev, -- cgit v1.2.3-70-g09d2 From e7693548950ea5801d5d8b00414aed37033cf972 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Sat, 18 Apr 2009 12:29:42 +0300 Subject: mtd: expose subpage size via sysfs MTD has got sysfs support in 2.6.30-rc1. But subpage size is not exposed there - do this. UBI utilities badly need this parameter. At the moment there is no way to get subpage size - ioctls do not return it. And we just got sysfs support, so we can easilly extend it with this additional parameter. This can be merged late in the development cycle because: 1. sysfs support has been just added - there are no users for it so far, even. 2. UBI utilities really need this parameter, and it is better not to delay this. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/mtdcore.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 051b4d4ed21f..bccb4b1ffc46 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -132,6 +132,17 @@ static ssize_t mtd_writesize_show(struct device *dev, } static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL); +static ssize_t mtd_subpagesize_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct mtd_info *mtd = dev_to_mtd(dev); + unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft; + + return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize); + +} +static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL); + static ssize_t mtd_oobsize_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -169,6 +180,7 @@ static struct attribute *mtd_attrs[] = { &dev_attr_size.attr, &dev_attr_erasesize.attr, &dev_attr_writesize.attr, + &dev_attr_subpagesize.attr, &dev_attr_oobsize.attr, &dev_attr_numeraseregions.attr, &dev_attr_name.attr, -- cgit v1.2.3-70-g09d2 From 3f33b0aaac4e208579fe5aa2964857d4e9ba10c5 Mon Sep 17 00:00:00 2001 From: "Steven A. Falco" Date: Mon, 27 Apr 2009 17:10:10 -0400 Subject: mtd: Bug in m25p80.c during whole-chip erase There is a logic error in "whole chip erase" for the m25p80 family. If the whole device is successfully erased, erase_chip() will return 0, and the code will fall through to the "else" clause, and do sector-by-sector erase in addition to the whole-chip erase. This patch corrects that. Also, the MAX_READY_WAIT_COUNT is insufficient for an m25p16 connected to a 400 MHz powerpc. Increasing it allows me to successfully program the device on my board. Signed-off-by: Steven A. Falco Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 8185b1f3e5e6..dfadef84c052 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_COUNT 100000 +#define MAX_READY_WAIT_COUNT 1000000 #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ @@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr) mutex_lock(&flash->lock); /* whole-chip erase? */ - if (len == flash->mtd.size && erase_chip(flash)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; + if (len == flash->mtd.size) { + if (erase_chip(flash)) { + instr->state = MTD_ERASE_FAILED; + mutex_unlock(&flash->lock); + return -EIO; + } /* REVISIT in some cases we could speed up erasing large regions * by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up -- cgit v1.2.3-70-g09d2 From cd1a6de7d4a492bf3405a6c070075a4cb8c90262 Mon Sep 17 00:00:00 2001 From: Peter Horton Date: Fri, 8 May 2009 13:51:53 +0100 Subject: mtd: fix timeout in M25P80 driver Extend erase timeout in M25P80 SPI Flash driver. The M25P80 drivers fails erasing sectors on a M25P128 because the ready wait timeout is too short. Change the timeout from a simple loop count to a suitable number of seconds. Signed-off-by: Peter Horton Tested-by: Martin Michlmayr Signed-off-by: Andrew Morton Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index dfadef84c052..cc6369ea67dd 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -54,7 +54,7 @@ #define SR_SRWD 0x80 /* SR write protect */ /* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_COUNT 1000000 +#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */ #define CMD_SIZE 4 #ifdef CONFIG_M25PXX_USE_FAST_READ @@ -139,20 +139,20 @@ static inline int write_enable(struct m25p *flash) */ static int wait_till_ready(struct m25p *flash) { - int count; + unsigned long deadline; int sr; - /* one chip guarantees max 5 msec wait here after page writes, - * but potentially three seconds (!) after page erase. - */ - for (count = 0; count < MAX_READY_WAIT_COUNT; count++) { + deadline = jiffies + MAX_READY_WAIT_JIFFIES; + + do { if ((sr = read_sr(flash)) < 0) break; else if (!(sr & SR_WIP)) return 0; - /* REVISIT sometimes sleeping would be best */ - } + cond_resched(); + + } while (!time_after_eq(jiffies, deadline)); return 1; } -- cgit v1.2.3-70-g09d2