From be4491838359e78e42e88db4ac479e21c5eda1e0 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 22 Sep 2021 17:17:36 +0100 Subject: gpio: 74x164: Add SPI device ID table Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding a SPI device ID table. Fixes: 96c8395e2166 ("spi: Revert modalias changes") Signed-off-by: Mark Brown Reviewed-by: Linus Walleij Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-74x164.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c index 05637d585152..4a55cdf089d6 100644 --- a/drivers/gpio/gpio-74x164.c +++ b/drivers/gpio/gpio-74x164.c @@ -174,6 +174,13 @@ static int gen_74x164_remove(struct spi_device *spi) return 0; } +static const struct spi_device_id gen_74x164_spi_ids[] = { + { .name = "74hc595" }, + { .name = "74lvc594" }, + {}, +}; +MODULE_DEVICE_TABLE(spi, gen_74x164_spi_ids); + static const struct of_device_id gen_74x164_dt_ids[] = { { .compatible = "fairchild,74hc595" }, { .compatible = "nxp,74lvc594" }, @@ -188,6 +195,7 @@ static struct spi_driver gen_74x164_driver = { }, .probe = gen_74x164_probe, .remove = gen_74x164_remove, + .id_table = gen_74x164_spi_ids, }; module_spi_driver(gen_74x164_driver); -- cgit v1.2.3-70-g09d2 From 55a9968c7e139209a9e93d4ca4321731bea5fc95 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 24 Sep 2021 01:46:40 +0300 Subject: gpio: pca953x: Improve bias setting The commit 15add06841a3 ("gpio: pca953x: add ->set_config implementation") introduced support for bias setting. However this, due to being half-baked, brought potential issues: - the turning bias via disabling makes the pin floating for a while; - once enabled, bias can't be disabled. Fix all these by adding support for bias disabling and move the disabling part under the corresponding conditional. While at it, add support for default setting, since it's cheap to add. Fixes: 15add06841a3 ("gpio: pca953x: add ->set_config implementation") Cc: Thomas Petazzoni Signed-off-by: Andy Shevchenko Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-pca953x.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c index 8ebf369b3ba0..d2fe76f3f34f 100644 --- a/drivers/gpio/gpio-pca953x.c +++ b/drivers/gpio/gpio-pca953x.c @@ -559,21 +559,21 @@ static int pca953x_gpio_set_pull_up_down(struct pca953x_chip *chip, mutex_lock(&chip->i2c_lock); - /* Disable pull-up/pull-down */ - ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0); - if (ret) - goto exit; - /* Configure pull-up/pull-down */ if (config == PIN_CONFIG_BIAS_PULL_UP) ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, bit); else if (config == PIN_CONFIG_BIAS_PULL_DOWN) ret = regmap_write_bits(chip->regmap, pull_sel_reg, bit, 0); + else + ret = 0; if (ret) goto exit; - /* Enable pull-up/pull-down */ - ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit); + /* Disable/Enable pull-up/pull-down */ + if (config == PIN_CONFIG_BIAS_DISABLE) + ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, 0); + else + ret = regmap_write_bits(chip->regmap, pull_en_reg, bit, bit); exit: mutex_unlock(&chip->i2c_lock); @@ -587,7 +587,9 @@ static int pca953x_gpio_set_config(struct gpio_chip *gc, unsigned int offset, switch (pinconf_to_config_param(config)) { case PIN_CONFIG_BIAS_PULL_UP: + case PIN_CONFIG_BIAS_PULL_PIN_DEFAULT: case PIN_CONFIG_BIAS_PULL_DOWN: + case PIN_CONFIG_BIAS_DISABLE: return pca953x_gpio_set_pull_up_down(chip, offset, config); default: return -ENOTSUPP; -- cgit v1.2.3-70-g09d2 From 6fda593f3082ef1aa783ac13e89f673fd69a2cb6 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Tue, 5 Oct 2021 15:24:49 +0300 Subject: gpio: mockup: Convert to use software nodes The gpio-mockup driver creates the properties that are shared between platform and GPIO devices. Because of that, the properties may not be removed at the proper point of time without provoking a use-after-free as shown in the following backtrace: refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 103 at lib/refcount.c:28 refcount_warn_saturate+0xd1/0x120 ... Call Trace: kobject_put+0xdc/0xf0 software_node_notify_remove+0xa8/0xc0 device_del+0x15a/0x3e0 That's why the driver has to manage the lifetime of the software nodes by itself. The problem originates from the old device_add_properties() API, but has been only revealed after the commit bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()"). Hence, it's used as a landmark for backporting. Fixes: bd1e336aa853 ("driver core: platform: Remove platform_device_add_properties()") Reported-by: Kent Gibson Tested-by: Kent Gibson Signed-off-by: Andy Shevchenko [Bartosz: tweaked local variable placement] Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-mockup.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 0a9d746a0fe0..d26bff29157b 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -476,10 +476,19 @@ static struct platform_device *gpio_mockup_pdevs[GPIO_MOCKUP_MAX_GC]; static void gpio_mockup_unregister_pdevs(void) { + struct platform_device *pdev; + struct fwnode_handle *fwnode; int i; - for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) - platform_device_unregister(gpio_mockup_pdevs[i]); + for (i = 0; i < GPIO_MOCKUP_MAX_GC; i++) { + pdev = gpio_mockup_pdevs[i]; + if (!pdev) + continue; + + fwnode = dev_fwnode(&pdev->dev); + platform_device_unregister(pdev); + fwnode_remove_software_node(fwnode); + } } static __init char **gpio_mockup_make_line_names(const char *label, @@ -508,6 +517,7 @@ static int __init gpio_mockup_register_chip(int idx) struct property_entry properties[GPIO_MOCKUP_MAX_PROP]; struct platform_device_info pdevinfo; struct platform_device *pdev; + struct fwnode_handle *fwnode; char **line_names = NULL; char chip_label[32]; int prop = 0, base; @@ -536,13 +546,18 @@ static int __init gpio_mockup_register_chip(int idx) "gpio-line-names", line_names, ngpio); } + fwnode = fwnode_create_software_node(properties, NULL); + if (IS_ERR(fwnode)) + return PTR_ERR(fwnode); + pdevinfo.name = "gpio-mockup"; pdevinfo.id = idx; - pdevinfo.properties = properties; + pdevinfo.fwnode = fwnode; pdev = platform_device_register_full(&pdevinfo); kfree_strarray(line_names, ngpio); if (IS_ERR(pdev)) { + fwnode_remove_software_node(fwnode); pr_err("error registering device"); return PTR_ERR(pdev); } -- cgit v1.2.3-70-g09d2