From 19d7ca2998e095086869318dd2ad966952f5ac82 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Fri, 18 Nov 2011 16:32:34 +0900 Subject: sh: fix build warning in board-sh7757lcr MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixed the following build warnings: CC arch/sh/boards/board-sh7757lcr.o arch/sh/boards/board-sh7757lcr.c:77: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:106: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:151: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:181: warning: initialization from incompatible pointer type arch/sh/boards/board-sh7757lcr.c:213: warning: missing braces around initializer arch/sh/boards/board-sh7757lcr.c:213: warning: (near initialization for ‘sh7757lcr_mmcif_dma.chan_priv_tx’) Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index ec8c84c14b17..895e337c79b6 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = { #define GBECONT 0xffc10100 #define GBECONT_RMII1 BIT(17) #define GBECONT_RMII0 BIT(16) -static void sh7757_eth_set_mdio_gate(unsigned long addr) +static void sh7757_eth_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) + if (((unsigned long)addr & 0x00000fff) < 0x0800) writel(readl(GBECONT) | GBECONT_RMII0, GBECONT); else writel(readl(GBECONT) | GBECONT_RMII1, GBECONT); @@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = { }, }; -static void sh7757_eth_giga_set_mdio_gate(unsigned long addr) +static void sh7757_eth_giga_set_mdio_gate(void *addr) { - if ((addr & 0x00000fff) < 0x0800) { + if (((unsigned long)addr & 0x00000fff) < 0x0800) { gpio_set_value(GPIO_PTT4, 1); writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT); } else { @@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = { }; static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = SHDMA_SLAVE_MMCIF_TX, - .chan_priv_rx = SHDMA_SLAVE_MMCIF_RX, + .chan_priv_tx = { + .slave_id = SHDMA_SLAVE_MMCIF_TX, + }, + .chan_priv_rx = { + .slave_id = SHDMA_SLAVE_MMCIF_RX, + } }; static struct sh_mmcif_plat_data sh_mmcif_plat = { -- cgit v1.2.3-70-g09d2 From 91ec37cc1015220965e39bf342fb846810d19e79 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Thu, 17 Nov 2011 20:31:02 +0100 Subject: Fix comparison using wrong pointer variable in dma debug code cppcheck reported: [lib/dma-debug.c:248] -> [lib/dma-debug.c:248]: (style) Same expression on both sides of '=='. Signed-off-by: Thomas Jarosch Signed-off-by: Joerg Roedel --- lib/dma-debug.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/dma-debug.c b/lib/dma-debug.c index 74c6c7fce749..fea790a2b176 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -245,7 +245,7 @@ static void put_hash_bucket(struct hash_bucket *bucket, static bool exact_match(struct dma_debug_entry *a, struct dma_debug_entry *b) { - return ((a->dev_addr == a->dev_addr) && + return ((a->dev_addr == b->dev_addr) && (a->dev == b->dev)) ? true : false; } -- cgit v1.2.3-70-g09d2 From 7c8f4247986bb5c5fb1d5b1fad35461989fe8310 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 23 Nov 2011 10:18:52 +1100 Subject: md/lock: ensure updates to page_attrs are properly locked. Page attributes are set using __set_bit rather than set_bit as it normally called under a spinlock so the extra atomicity is not needed. However there are two places where we might set or clear page attributes without holding the spinlock. So add the spinlock in those cases. This might be the cause of occasional reports that bits a aren't getting clear properly - theory is that BITMAP_PAGE_PENDING gets lost when BITMAP_PAGE_NEEDWRITE is set or cleared. This is an inconvenience, not a threat to data safety. Signed-off-by: NeilBrown --- drivers/md/bitmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 7878712721bf..b6907118283a 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -1106,10 +1106,12 @@ void bitmap_write_all(struct bitmap *bitmap) */ int i; + spin_lock_irq(&bitmap->lock); for (i = 0; i < bitmap->file_pages; i++) set_page_attr(bitmap, bitmap->filemap[i], BITMAP_PAGE_NEEDWRITE); bitmap->allclean = 0; + spin_unlock_irq(&bitmap->lock); } static void bitmap_count_page(struct bitmap *bitmap, sector_t offset, int inc) @@ -1605,7 +1607,9 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e) for (chunk = s; chunk <= e; chunk++) { sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap); bitmap_set_memory_bits(bitmap, sec, 1); + spin_lock_irq(&bitmap->lock); bitmap_file_set_bit(bitmap, sec); + spin_unlock_irq(&bitmap->lock); if (sec < bitmap->mddev->recovery_cp) /* We are asserting that the array is dirty, * so move the recovery_cp address back so -- cgit v1.2.3-70-g09d2 From 5151412dd4338b273afdb107c3772528e9e67d92 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Wed, 23 Nov 2011 10:59:13 +0100 Subject: block: initialize request_queue's numa node during struct request_queue is allocated with __GFP_ZERO so its "node" field is zero before initialization. This causes an oops if node 0 is offline in the page allocator because its zonelists are not initialized. From Dave Young's dmesg: SRAT: Node 1 PXM 2 0-d0000000 SRAT: Node 1 PXM 2 100000000-330000000 SRAT: Node 0 PXM 1 330000000-630000000 Initmem setup node 1 0000000000000000-000000000affb000 ... Built 1 zonelists in Node order, mobility grouping on. ... BUG: unable to handle kernel paging request at 0000000000001c08 IP: [] __alloc_pages_nodemask+0xb5/0x870 and __alloc_pages_nodemask+0xb5 translates to a NULL pointer on zonelist->_zonerefs. The fix is to initialize q->node at the time of allocation so the correct node is passed to the slab allocator later. Since blk_init_allocated_queue_node() is no longer needed, merge it with blk_init_allocated_queue(). [rientjes@google.com: changelog, initializing q->node] Cc: stable@vger.kernel.org [2.6.37+] Reported-by: Dave Young Signed-off-by: Mike Snitzer Signed-off-by: David Rientjes Tested-by: Dave Young Signed-off-by: Jens Axboe --- block/blk-core.c | 14 +++----------- include/linux/blkdev.h | 3 --- 2 files changed, 3 insertions(+), 14 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index ea70e6c80cd3..20d69f6beb6b 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -467,6 +467,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id) q->backing_dev_info.state = 0; q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY; q->backing_dev_info.name = "block"; + q->node = node_id; err = bdi_init(&q->backing_dev_info); if (err) { @@ -551,7 +552,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id) if (!uninit_q) return NULL; - q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id); + q = blk_init_allocated_queue(uninit_q, rfn, lock); if (!q) blk_cleanup_queue(uninit_q); @@ -562,19 +563,10 @@ EXPORT_SYMBOL(blk_init_queue_node); struct request_queue * blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn, spinlock_t *lock) -{ - return blk_init_allocated_queue_node(q, rfn, lock, -1); -} -EXPORT_SYMBOL(blk_init_allocated_queue); - -struct request_queue * -blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn, - spinlock_t *lock, int node_id) { if (!q) return NULL; - q->node = node_id; if (blk_init_free_list(q)) return NULL; @@ -604,7 +596,7 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn, return NULL; } -EXPORT_SYMBOL(blk_init_allocated_queue_node); +EXPORT_SYMBOL(blk_init_allocated_queue); int blk_get_queue(struct request_queue *q) { diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index c7a6d3b5bc7b..94acd8172b5b 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -805,9 +805,6 @@ extern void blk_unprep_request(struct request *); */ extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id); -extern struct request_queue *blk_init_allocated_queue_node(struct request_queue *, - request_fn_proc *, - spinlock_t *, int node_id); extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *); extern struct request_queue *blk_init_allocated_queue(struct request_queue *, request_fn_proc *, spinlock_t *); -- cgit v1.2.3-70-g09d2 From 8d715f0024f64ad1b1be85d8c081cf577944c847 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 18 Nov 2011 20:39:01 -0800 Subject: drm/i915: add multi-threaded forcewake support On IVB C0+ with newer BIOSes, the forcewake handshake has changed. There's now a bitfield for different driver components to keep the GT powered on. On Linux, we centralize forcewake handling in one place, so we still just need a single bit, but we need to use the new registers if MT forcewake is enabled. This needs testing on affected machines. Please reply with your tested-by if you had problems after a BIOS upgrade and this patch fixes them. v2: force MT mode. shift by 16 v3: set MT force wake bits then check ECOBUS Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42923 Tested-by: Manoj Iyer Tested-by: Robert Hooker Tested-by: Keith Packard Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 35 +++++++++++++++++++++++++++++------ drivers/gpu/drm/i915/i915_drv.h | 13 +++++++++++-- drivers/gpu/drm/i915/i915_reg.h | 4 ++++ drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++++++++ 4 files changed, 66 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 15bfa9145d2b..28836fe72211 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -328,7 +328,7 @@ void intel_detect_pch(struct drm_device *dev) } } -static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) +void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) { int count; @@ -344,6 +344,22 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) udelay(10); } +void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) +{ + int count; + + count = 0; + while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1)) + udelay(10); + + I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1); + POSTING_READ(FORCEWAKE_MT); + + count = 0; + while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0) + udelay(10); +} + /* * Generally this is called implicitly by the register read function. However, * if some sequence requires the GT to not power down then this function should @@ -356,15 +372,21 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) /* Forcewake is atomic in case we get in here without the lock */ if (atomic_add_return(1, &dev_priv->forcewake_count) == 1) - __gen6_gt_force_wake_get(dev_priv); + dev_priv->display.force_wake_get(dev_priv); } -static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) +void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { I915_WRITE_NOTRACE(FORCEWAKE, 0); POSTING_READ(FORCEWAKE); } +void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) +{ + I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0); + POSTING_READ(FORCEWAKE_MT); +} + /* * see gen6_gt_force_wake_get() */ @@ -373,7 +395,7 @@ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); if (atomic_dec_and_test(&dev_priv->forcewake_count)) - __gen6_gt_force_wake_put(dev_priv); + dev_priv->display.force_wake_put(dev_priv); } void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) @@ -903,8 +925,9 @@ MODULE_LICENSE("GPL and additional rights"); /* We give fast paths for the really cool registers */ #define NEEDS_FORCE_WAKE(dev_priv, reg) \ (((dev_priv)->info->gen >= 6) && \ - ((reg) < 0x40000) && \ - ((reg) != FORCEWAKE)) + ((reg) < 0x40000) && \ + ((reg) != FORCEWAKE) && \ + ((reg) != ECOBUS)) #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 4a9c1b979804..8ba88cfc36de 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -107,6 +107,7 @@ struct opregion_header; struct opregion_acpi; struct opregion_swsci; struct opregion_asle; +struct drm_i915_private; struct intel_opregion { struct opregion_header *header; @@ -221,6 +222,8 @@ struct drm_i915_display_funcs { struct drm_i915_gem_object *obj); int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb, int x, int y); + void (*force_wake_get)(struct drm_i915_private *dev_priv); + void (*force_wake_put)(struct drm_i915_private *dev_priv); /* clock updates for mode set */ /* cursor updates */ /* render clock increase/decrease */ @@ -1308,6 +1311,11 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val); extern void intel_detect_pch(struct drm_device *dev); extern int intel_trans_dp_port_sel(struct drm_crtc *crtc); +extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv); +extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv); + /* overlay */ #ifdef CONFIG_DEBUG_FS extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev); @@ -1352,8 +1360,9 @@ void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv); /* We give fast paths for the really cool registers */ #define NEEDS_FORCE_WAKE(dev_priv, reg) \ (((dev_priv)->info->gen >= 6) && \ - ((reg) < 0x40000) && \ - ((reg) != FORCEWAKE)) + ((reg) < 0x40000) && \ + ((reg) != FORCEWAKE) && \ + ((reg) != ECOBUS)) #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg); diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b080cc824001..8990057e384c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3449,6 +3449,10 @@ #define FORCEWAKE 0xA18C #define FORCEWAKE_ACK 0x130090 +#define FORCEWAKE_MT 0xa188 /* multi-threaded */ +#define FORCEWAKE_MT_ACK 0x130040 +#define ECOBUS 0xa180 +#define FORCEWAKE_MT_ENABLE (1<<5) #define GT_FIFO_FREE_ENTRIES 0x120008 #define GT_FIFO_NUM_RESERVED_ENTRIES 20 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index e77a863a3833..633c69365388 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -8491,6 +8491,28 @@ static void intel_init_display(struct drm_device *dev) /* For FIFO watermark updates */ if (HAS_PCH_SPLIT(dev)) { + dev_priv->display.force_wake_get = __gen6_gt_force_wake_get; + dev_priv->display.force_wake_put = __gen6_gt_force_wake_put; + + /* IVB configs may use multi-threaded forcewake */ + if (IS_IVYBRIDGE(dev)) { + u32 ecobus; + + mutex_lock(&dev->struct_mutex); + __gen6_gt_force_wake_mt_get(dev_priv); + ecobus = I915_READ(ECOBUS); + __gen6_gt_force_wake_mt_put(dev_priv); + mutex_unlock(&dev->struct_mutex); + + if (ecobus & FORCEWAKE_MT_ENABLE) { + DRM_DEBUG_KMS("Using MT version of forcewake\n"); + dev_priv->display.force_wake_get = + __gen6_gt_force_wake_mt_get; + dev_priv->display.force_wake_put = + __gen6_gt_force_wake_mt_put; + } + } + if (HAS_PCH_IBX(dev)) dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating; else if (HAS_PCH_CPT(dev)) -- cgit v1.2.3-70-g09d2 From 1a2eb4604b85c5efb343da8a4dcf41288fcfca85 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 16 Nov 2011 16:26:07 -0800 Subject: drm/i915: Hook up Ivybridge eDP The Ivybridge eDP control register looks like a cross between a Cougarpoint PCH DP control register and a Sandybridge eDP control register. Where things trivially match, share the code. Where there are any tricky bits, just split things out into two obviously separate code paths. Signed-off-by: Keith Packard Tested-by: Fang Xun Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41991 --- drivers/gpu/drm/i915/i915_reg.h | 18 +++++ drivers/gpu/drm/i915/intel_dp.c | 149 +++++++++++++++++++++++++++++++--------- 2 files changed, 133 insertions(+), 34 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 8990057e384c..6ef68c74189d 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3447,6 +3447,24 @@ #define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22) #define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22) +/* IVB */ +#define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22) +#define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22) +#define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22) +#define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22) +#define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22) +#define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22) +#define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x33 <<22) + +/* legacy values */ +#define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22) +#define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22) +#define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22) +#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22) +#define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22) + +#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) + #define FORCEWAKE 0xA18C #define FORCEWAKE_ACK 0x130090 #define FORCEWAKE_MT 0xa188 /* multi-threaded */ diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 4d0358fad937..294f55788f0b 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -362,8 +362,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp, * clock divider. */ if (is_cpu_edp(intel_dp)) { - if (IS_GEN6(dev)) - aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */ + if (IS_GEN6(dev) || IS_GEN7(dev)) + aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */ else aux_clock_divider = 225; /* eDP input clock at 450Mhz */ } else if (HAS_PCH_SPLIT(dev)) @@ -817,10 +817,11 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, } /* - * There are three kinds of DP registers: + * There are four kinds of DP registers: * * IBX PCH - * CPU + * SNB CPU + * IVB CPU * CPT PCH * * IBX PCH and CPU are the same for almost everything, @@ -873,7 +874,25 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, /* Split out the IBX/CPU vs CPT settings */ - if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { + if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) { + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT; + + if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN) + intel_dp->DP |= DP_ENHANCED_FRAMING; + + intel_dp->DP |= intel_crtc->pipe << 29; + + /* don't miss out required setting for eDP */ + intel_dp->DP |= DP_PLL_ENABLE; + if (adjusted_mode->clock < 200000) + intel_dp->DP |= DP_PLL_FREQ_160MHZ; + else + intel_dp->DP |= DP_PLL_FREQ_270MHZ; + } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) { intel_dp->DP |= intel_dp->color_range; if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) @@ -1375,34 +1394,59 @@ static char *link_train_names[] = { * These are source-specific values; current Intel hardware supports * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB */ -#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800 -#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200 static uint8_t -intel_dp_pre_emphasis_max(uint8_t voltage_swing) +intel_dp_voltage_max(struct intel_dp *intel_dp) { - switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { - case DP_TRAIN_VOLTAGE_SWING_400: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_600: - return DP_TRAIN_PRE_EMPHASIS_6; - case DP_TRAIN_VOLTAGE_SWING_800: - return DP_TRAIN_PRE_EMPHASIS_3_5; - case DP_TRAIN_VOLTAGE_SWING_1200: - default: - return DP_TRAIN_PRE_EMPHASIS_0; + struct drm_device *dev = intel_dp->base.base.dev; + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_800; + else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + return DP_TRAIN_VOLTAGE_SWING_1200; + else + return DP_TRAIN_VOLTAGE_SWING_800; +} + +static uint8_t +intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing) +{ + struct drm_device *dev = intel_dp->base.base.dev; + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } + } else { + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } } } static void intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE]) { - struct drm_device *dev = intel_dp->base.base.dev; uint8_t v = 0; uint8_t p = 0; int lane; uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS); - int voltage_max; + uint8_t voltage_max; + uint8_t preemph_max; for (lane = 0; lane < intel_dp->lane_count; lane++) { uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane); @@ -1414,15 +1458,13 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST p = this_p; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) - voltage_max = I830_DP_VOLTAGE_MAX_CPT; - else - voltage_max = I830_DP_VOLTAGE_MAX; + voltage_max = intel_dp_voltage_max(intel_dp); if (v >= voltage_max) v = voltage_max | DP_TRAIN_MAX_SWING_REACHED; - if (p >= intel_dp_pre_emphasis_max(v)) - p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + preemph_max = intel_dp_pre_emphasis_max(intel_dp, v); + if (p >= preemph_max) + p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; for (lane = 0; lane < 4; lane++) intel_dp->train_set[lane] = v | p; @@ -1494,6 +1536,37 @@ intel_gen6_edp_signal_levels(uint8_t train_set) } } +/* Gen7's DP voltage swing and pre-emphasis control */ +static uint32_t +intel_gen7_edp_signal_levels(uint8_t train_set) +{ + int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK | + DP_TRAIN_PRE_EMPHASIS_MASK); + switch (signal_levels) { + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_400MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_400MV_3_5DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6: + return EDP_LINK_TRAIN_400MV_6DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_600MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_600MV_3_5DB_IVB; + + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0: + return EDP_LINK_TRAIN_800MV_0DB_IVB; + case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5: + return EDP_LINK_TRAIN_800MV_3_5DB_IVB; + + default: + DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:" + "0x%x\n", signal_levels); + return EDP_LINK_TRAIN_500MV_0DB_IVB; + } +} + static uint8_t intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane) @@ -1599,7 +1672,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP_LINK_CONFIGURATION_SIZE); DP |= DP_PORT_EN; - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) DP &= ~DP_LINK_TRAIN_MASK_CPT; else DP &= ~DP_LINK_TRAIN_MASK; @@ -1613,7 +1687,11 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) uint8_t link_status[DP_LINK_STATUS_SIZE]; uint32_t signal_levels; - if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1622,7 +1700,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp) DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_PAT_1_CPT; else reg = DP | DP_LINK_TRAIN_PAT_1; @@ -1703,7 +1781,10 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) break; } - if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { + if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) { + signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]); + DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels; + } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) { signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]); DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels; } else { @@ -1711,7 +1792,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_PAT_2_CPT; else reg = DP | DP_LINK_TRAIN_PAT_2; @@ -1752,7 +1833,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp) ++tries; } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) reg = DP | DP_LINK_TRAIN_OFF_CPT; else reg = DP | DP_LINK_TRAIN_OFF; @@ -1782,7 +1863,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) udelay(100); } - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) { + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) { DP &= ~DP_LINK_TRAIN_MASK_CPT; I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT); } else { @@ -1794,7 +1875,7 @@ intel_dp_link_down(struct intel_dp *intel_dp) msleep(17); if (is_edp(intel_dp)) { - if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) + if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) DP |= DP_LINK_TRAIN_OFF_CPT; else DP |= DP_LINK_TRAIN_OFF; -- cgit v1.2.3-70-g09d2 From ca88479c1c3b7b1a9f94320745f5331e1de77f80 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 18 Nov 2011 11:09:24 -0800 Subject: drm/i915: Treat pre-gen4 backlight duty cycle value consistently For i945 and earlier chips, the backlight frequency value had the low bit (of 16) fixed to zero. The Pineview code path handled this by just exposing the backlight range as 15 bits while other chips had the backlight range limited to 0 .. 0xfffe. This patch makes everyone take the pineview code path, providing 15 bits of backlight duty cycle range which seems more than sufficient to me. Daniel Mack reported that writing 1 to bit 0 of the duty cycle register was causing problems on his Samsung X20 notebook, even when the duty cycle value was less than the maximum backlight value. (He tried a value of 29749 with max_brightness of 29750). This patch never writes a '1' to that bit. Signed-off-by: Keith Packard Reviewed-by: Takashi Iwai Reported-and-tested-by: Daniel Mack Cc: stable@kernel.org --- drivers/gpu/drm/i915/intel_panel.c | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 21f60b7d69a3..04d79fd1dc9d 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -178,13 +178,10 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) if (HAS_PCH_SPLIT(dev)) { max >>= 16; } else { - if (IS_PINEVIEW(dev)) { + if (INTEL_INFO(dev)->gen < 4) max >>= 17; - } else { + else max >>= 16; - if (INTEL_INFO(dev)->gen < 4) - max &= ~1; - } if (is_backlight_combination_mode(dev)) max *= 0xff; @@ -203,13 +200,12 @@ u32 intel_panel_get_backlight(struct drm_device *dev) val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; } else { val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; - if (IS_PINEVIEW(dev)) + if (INTEL_INFO(dev)->gen < 4) val >>= 1; if (is_backlight_combination_mode(dev)) { u8 lbpc; - val &= ~1; pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); val *= lbpc; } @@ -246,11 +242,9 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level } tmp = I915_READ(BLC_PWM_CTL); - if (IS_PINEVIEW(dev)) { - tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1); + if (INTEL_INFO(dev)->gen < 4) level <<= 1; - } else - tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; + tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_CTL, tmp | level); } -- cgit v1.2.3-70-g09d2 From 1b6cec8a6910ca08d727898453baad22b0122920 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:15:57 +0900 Subject: ARM: mach-shmobile: Kota2 PINT fix Support PINT on sh73a0 and Kota2 using INTC PINT macros. With this patch applied the Kota2 ethernet is handled through one of the chained sh73a0 PINT interrupt controllers. sh73a0 PINT support is included in 3.2-rc but the Kota2 board code does not make use of this shared code base without this patch. Without this patch kota2 on-board ethernet is broken. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index bd9a78424d6b..5e084b9a8404 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -56,7 +56,7 @@ static struct resource smsc9220_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(33), /* PINTA2 @ PORT144 */ + .start = SH73A0_PINT0_IRQ(2), /* PINTA2 */ .flags = IORESOURCE_IRQ, }, }; @@ -317,18 +317,6 @@ static void __init kota2_map_io(void) shmobile_setup_console(); } -#define PINTER0A 0xe69000a0 -#define PINTCR0A 0xe69000b0 - -void __init kota2_init_irq(void) -{ - sh73a0_init_irq(); - - /* setup PINT: enable PINTA2 as active low */ - __raw_writel(1 << 29, PINTER0A); - __raw_writew(2 << 10, PINTCR0A); -} - static void __init kota2_init(void) { sh73a0_pinmux_init(); @@ -447,7 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, - .init_irq = kota2_init_irq, + .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, .timer = &kota2_timer, -- cgit v1.2.3-70-g09d2 From dcb4ea869877b00fd1c761662bfd9359d15a8c2a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:29:54 +0900 Subject: ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix Fix IRQ support on the Kota2 board. The sh73a0 and the Kota2 board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke Kota2 irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 5e084b9a8404..53e5e45521aa 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -435,6 +435,7 @@ struct sys_timer kota2_timer = { MACHINE_START(KOTA2, "kota2") .map_io = kota2_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = kota2_init, -- cgit v1.2.3-70-g09d2 From 33661c9e2062865acde9d421c971f1c142cf99ca Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:44:58 +0900 Subject: ARM: mach-shmobile: Kota2 TPU LED platform data This patch updates the Kota2 board support code to use the recently merged TPU LED driver whenever possible. The sh73a0 SoC has 5 TPU hardware blocks each with 4 timer channels which in theory allows a total of 20 LEDs to be controlled by "leds-renesas-tpu" driver instances. The Kota2 board has 4 LEDs connected to GPIO pins that also come with TPU pin functions, so this patch ties up these 4 LEDS and leaves the remaining 3 LEDS for the GPIO based LED driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 122 ++++++++++++++++++++++++++++++++-- arch/arm/mach-shmobile/clock-sh73a0.c | 16 +++++ 2 files changed, 134 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 53e5e45521aa..f44150b5ae46 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include #include @@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = { #define GPIO_LED(n, g) { .name = n, .gpio = g } static struct gpio_led gpio_leds[] = { - GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */ - GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */ - GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */ - GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */ GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */ GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */ GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */ @@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = { }, }; +/* TPU LED */ +static struct led_renesas_tpu_config led_renesas_tpu12_pdata = { + .name = "V2513", + .pin_gpio_fn = GPIO_FN_TPU1TO2, + .pin_gpio = GPIO_PORT153, + .channel_offset = 0x90, + .timer_bit = 2, + .max_brightness = 1000, +}; + +static struct resource tpu12_resources[] = { + [0] = { + .name = "TPU12", + .start = 0xe6610090, + .end = 0xe66100b5, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu12_device = { + .name = "leds-renesas-tpu", + .id = 12, + .dev = { + .platform_data = &led_renesas_tpu12_pdata, + }, + .num_resources = ARRAY_SIZE(tpu12_resources), + .resource = tpu12_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu41_pdata = { + .name = "V2514", + .pin_gpio_fn = GPIO_FN_TPU4TO1, + .pin_gpio = GPIO_PORT199, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu41_resources[] = { + [0] = { + .name = "TPU41", + .start = 0xe6640050, + .end = 0xe6640075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu41_device = { + .name = "leds-renesas-tpu", + .id = 41, + .dev = { + .platform_data = &led_renesas_tpu41_pdata, + }, + .num_resources = ARRAY_SIZE(tpu41_resources), + .resource = tpu41_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu21_pdata = { + .name = "V2515", + .pin_gpio_fn = GPIO_FN_TPU2TO1, + .pin_gpio = GPIO_PORT197, + .channel_offset = 0x50, + .timer_bit = 1, + .max_brightness = 1000, +}; + +static struct resource tpu21_resources[] = { + [0] = { + .name = "TPU21", + .start = 0xe6620050, + .end = 0xe6620075, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu21_device = { + .name = "leds-renesas-tpu", + .id = 21, + .dev = { + .platform_data = &led_renesas_tpu21_pdata, + }, + .num_resources = ARRAY_SIZE(tpu21_resources), + .resource = tpu21_resources, +}; + +static struct led_renesas_tpu_config led_renesas_tpu30_pdata = { + .name = "KEYLED", + .pin_gpio_fn = GPIO_FN_TPU3TO0, + .pin_gpio = GPIO_PORT163, + .channel_offset = 0x10, + .timer_bit = 0, + .max_brightness = 1000, +}; + +static struct resource tpu30_resources[] = { + [0] = { + .name = "TPU30", + .start = 0xe6630010, + .end = 0xe6630035, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device leds_tpu30_device = { + .name = "leds-renesas-tpu", + .id = 30, + .dev = { + .platform_data = &led_renesas_tpu30_pdata, + }, + .num_resources = ARRAY_SIZE(tpu30_resources), + .resource = tpu30_resources, +}; + /* MMCIF */ static struct resource mmcif_resources[] = { [0] = { @@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = { &keysc_device, &gpio_keys_device, &gpio_leds_device, + &leds_tpu12_device, + &leds_tpu41_device, + &leds_tpu21_device, + &leds_tpu30_device, &mmcif_device, &sdhi0_device, &sdhi1_device, diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..a56d6c63b71e 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -113,6 +113,12 @@ static struct clk main_clk = { .ops = &main_clk_ops, }; +/* Divide Main clock by two */ +static struct clk main_div2_clk = { + .ops = &div2_clk_ops, + .parent = &main_clk, +}; + /* PLL0, PLL1, PLL2, PLL3 */ static unsigned long pll_recalc(struct clk *clk) { @@ -181,6 +187,7 @@ static struct clk *main_clks[] = { &extal1_div2_clk, &extal2_div2_clk, &main_clk, + &main_div2_clk, &pll0_clk, &pll1_clk, &pll2_clk, @@ -268,6 +275,7 @@ enum { MSTP001, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, MSTP314, MSTP313, MSTP312, MSTP311, + MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, MSTP_NR }; @@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ [MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */ + [MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */ + [MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */ + [MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */ + [MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */ [MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ @@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */ + CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */ + CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */ + CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ -- cgit v1.2.3-70-g09d2 From eded9143151a116753b1d8e893bc2d37f8687e0b Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:31:40 +0900 Subject: ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix Fix IRQ support on the AG5EVM board. The sh73a0 and the AG5EVM board make use of the ARM GIC hardware block as main interrupt controller. The following commit changed the default behaviour for non-device tree platforms and broke AG5EVM irq support: f37a53c ARM: gic: fix irq_alloc_descs handling for sparse irq Without this fix the following warning triggers at boot: NR_IRQS:1024 nr_irqs:1024 1024 ------------[ cut here ]------------ WARNING: at arch/arm/common/gic.c:607 gic_init+0x90/0x2e4() Cannot allocate irq_descs @ IRQ16, assuming pre-allocated [] (unwind_backtrace+0x0/0xe0) from [] (warn_slowpath_commo) [] (warn_slowpath_common+0x48/0x60) from [] (warn_slowpath_) [] (warn_slowpath_fmt+0x2c/0x3c) from [] (gic_init+0x90/0x2) [] (gic_init+0x90/0x2e4) from [] (sh73a0_init_irq+0x30/0x18) [] (sh73a0_init_irq+0x30/0x184) from [] (init_IRQ+0x14/0x1c) [] (init_IRQ+0x14/0x1c) from [] (start_kernel+0x15c/0x2b8) [] (start_kernel+0x15c/0x2b8) from [<4000803c>] (0x4000803c) ---[ end trace 1b75b31a2719ed1c ]--- With this fix applied interrupts work as expected. Signed-off-by: Magnus Damm Acked-by: Rob Herring Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index b862e9f81e3e..7119b87cbfa0 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -607,6 +607,7 @@ struct sys_timer ag5evm_timer = { MACHINE_START(AG5EVM, "ag5evm") .map_io = ag5evm_map_io, + .nr_irqs = NR_IRQS_LEGACY, .init_irq = sh73a0_init_irq, .handle_irq = shmobile_handle_irq_gic, .init_machine = ag5evm_init, -- cgit v1.2.3-70-g09d2 From 9bcc0a5d0de137b3a154dc951c5ff70dce815879 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 22 Nov 2011 15:23:17 +0900 Subject: ARM: mach-shmobile: SH73A0 external Ethernet fix Keep the ZB clock enabled on sh73a0 to allow the BSC to access external peripherals hooked up to CS signals. This is needed to unbreak Ethernet support on sh73a0 boards such as AG5EVM and Kota2 together with the following patch: 794d78f drivers: sh: late disabling of clocks V2 Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/clock-sh73a0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 61a846bb30f2..84fd33c9f4ee 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -243,7 +243,7 @@ static struct clk div6_clks[DIV6_NR] = { [DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0), [DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0), [DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0), - [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0), + [DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT), [DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0), [DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0), [DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0), -- cgit v1.2.3-70-g09d2 From ff83bd82cb343d37b5ab8e402aaad9ef33d03f1e Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sat, 12 Nov 2011 22:33:30 -0300 Subject: [media] af9015: limit I2C access to keep FW happy AF9015 firmware does not like if it gets interrupted by I2C adapter request on some critical phases. During normal operation I2C adapter is used only 2nd demodulator and tuner on dual tuner devices. Override demodulator callbacks and use mutex for limit access to those "critical" paths to keep AF9015 happy. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 97 ++++++++++++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/af9015.h | 7 +++ 2 files changed, 104 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index c6c275bac08e..033aa8affd8e 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1093,9 +1093,80 @@ error: return ret; } +/* override demod callbacks for resource locking */ +static int af9015_af9013_set_frontend(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->set_frontend[adap->id](fe, params); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_read_status(struct dvb_frontend *fe, + fe_status_t *status) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->read_status[adap->id](fe, status); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_init(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->init[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + +/* override demod callbacks for resource locking */ +static int af9015_af9013_sleep(struct dvb_frontend *fe) +{ + int ret; + struct dvb_usb_adapter *adap = fe->dvb->priv; + struct af9015_state *priv = adap->dev->priv; + + if (mutex_lock_interruptible(&adap->dev->usb_mutex)) + return -EAGAIN; + + ret = priv->init[adap->id](fe); + + mutex_unlock(&adap->dev->usb_mutex); + + return ret; +} + static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; + struct af9015_state *state = adap->dev->priv; if (adap->id == 1) { /* copy firmware to 2nd demodulator */ @@ -1116,6 +1187,32 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) adap->fe_adap[0].fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], &adap->dev->i2c_adap); + /* + * AF9015 firmware does not like if it gets interrupted by I2C adapter + * request on some critical phases. During normal operation I2C adapter + * is used only 2nd demodulator and tuner on dual tuner devices. + * Override demodulator callbacks and use mutex for limit access to + * those "critical" paths to keep AF9015 happy. + * Note: we abuse unused usb_mutex here. + */ + if (adap->fe_adap[0].fe) { + state->set_frontend[adap->id] = + adap->fe_adap[0].fe->ops.set_frontend; + adap->fe_adap[0].fe->ops.set_frontend = + af9015_af9013_set_frontend; + + state->read_status[adap->id] = + adap->fe_adap[0].fe->ops.read_status; + adap->fe_adap[0].fe->ops.read_status = + af9015_af9013_read_status; + + state->init[adap->id] = adap->fe_adap[0].fe->ops.init; + adap->fe_adap[0].fe->ops.init = af9015_af9013_init; + + state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep; + adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep; + } + return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 6252ea6c1904..4a126177e101 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -102,6 +102,13 @@ struct af9015_state { u8 rc_repeat; u32 rc_keycode; u8 rc_last[4]; + + /* for demod callback override */ + int (*set_frontend[2]) (struct dvb_frontend *fe, + struct dvb_frontend_parameters *params); + int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status); + int (*init[2]) (struct dvb_frontend *fe); + int (*sleep[2]) (struct dvb_frontend *fe); }; struct af9015_config { -- cgit v1.2.3-70-g09d2 From d7d89dc85b9ec0e94f16e811d5f440106e2e77c0 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sun, 13 Nov 2011 00:22:33 -0300 Subject: [media] tda18218: fix 6 MHz default IF frequency Default IF for 6 MHz bandwidth is 3 MHz. Use that. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/tda18218.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/common/tuners/tda18218.c b/drivers/media/common/tuners/tda18218.c index aacfe2387e28..4fc29730a12c 100644 --- a/drivers/media/common/tuners/tda18218.c +++ b/drivers/media/common/tuners/tda18218.c @@ -141,7 +141,7 @@ static int tda18218_set_params(struct dvb_frontend *fe, switch (params->u.ofdm.bandwidth) { case BANDWIDTH_6_MHZ: LP_Fc = 0; - LO_Frac = params->frequency + 4000000; + LO_Frac = params->frequency + 3000000; break; case BANDWIDTH_7_MHZ: LP_Fc = 1; -- cgit v1.2.3-70-g09d2 From 576b849ea7af9ac05dca3ca92bc62c7528e8f0ef Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Sun, 9 Oct 2011 08:59:16 -0300 Subject: [media] mxl5007t: fix reg read Register to read should be written to register 0xfb and then perform I2C read to get reg value. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/common/tuners/mxl5007t.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/common/tuners/mxl5007t.c b/drivers/media/common/tuners/mxl5007t.c index 7eb1bf75cd07..5d02221e99dd 100644 --- a/drivers/media/common/tuners/mxl5007t.c +++ b/drivers/media/common/tuners/mxl5007t.c @@ -488,9 +488,10 @@ static int mxl5007t_write_regs(struct mxl5007t_state *state, static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val) { + u8 buf[2] = { 0xfb, reg }; struct i2c_msg msg[] = { { .addr = state->i2c_props.addr, .flags = 0, - .buf = ®, .len = 1 }, + .buf = buf, .len = 2 }, { .addr = state->i2c_props.addr, .flags = I2C_M_RD, .buf = val, .len = 1 }, }; -- cgit v1.2.3-70-g09d2 From ffe06198876a3cbda1cd642883adcec5304d9442 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 24 Nov 2011 19:22:10 -0200 Subject: MAINTAINERS: Update media entries Now that we've created a /drivers/staging/media, put it together with /drivers/media. Also, added there a missing entry for the Media API spec. Signed-off-by: Mauro Carvalho Chehab --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index e839b95b2723..273b0498e715 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4234,7 +4234,9 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git S: Maintained F: Documentation/dvb/ F: Documentation/video4linux/ +F: Documentation/DocBook/media/ F: drivers/media/ +F: drivers/staging/media/ F: include/media/ F: include/linux/dvb/ F: include/linux/videodev*.h -- cgit v1.2.3-70-g09d2 From e067d5abdd04cbf1bed466f95682c67e2496ba42 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 16 Nov 2011 22:17:03 -0300 Subject: [media] media/staging: fix allyesconfig build error Fix x86 allyesconfig builds. Builds fail due to a non-static variable named 'debug' in drivers/staging/media/as102/. Signed-off-by: Randy Dunlap Cc: Pierrick Hascoet Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/as102/as102_drv.c | 4 ++-- drivers/staging/media/as102/as102_drv.h | 3 ++- 2 files changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/staging/media/as102/as102_drv.c b/drivers/staging/media/as102/as102_drv.c index d335c7d6fa0f..828526d4c289 100644 --- a/drivers/staging/media/as102/as102_drv.c +++ b/drivers/staging/media/as102/as102_drv.c @@ -32,8 +32,8 @@ #include "as102_fw.h" #include "dvbdev.h" -int debug; -module_param_named(debug, debug, int, 0644); +int as102_debug; +module_param_named(debug, as102_debug, int, 0644); MODULE_PARM_DESC(debug, "Turn on/off debugging (default: off)"); int dual_tuner; diff --git a/drivers/staging/media/as102/as102_drv.h b/drivers/staging/media/as102/as102_drv.h index bcda635b5a99..fd33f5a12dcc 100644 --- a/drivers/staging/media/as102/as102_drv.h +++ b/drivers/staging/media/as102/as102_drv.h @@ -37,7 +37,8 @@ extern struct spi_driver as102_spi_driver; #define DRIVER_FULL_NAME "Abilis Systems as10x usb driver" #define DRIVER_NAME "as10x_usb" -extern int debug; +extern int as102_debug; +#define debug as102_debug #define dprintk(debug, args...) \ do { if (debug) { \ -- cgit v1.2.3-70-g09d2 From 7acde02a5bf4d3c32cd197eb7ce2257e6a0e17b7 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Tue, 13 Sep 2011 14:07:09 -0300 Subject: [media] s5p-fimc: Fix wrong pointer dereference when unregistering sensors After i2c_unregister_device() has been called the client object can already be freed and thus using the client pointer may lead to dereferencing freed memory. Avoid this by saving the adapter pointer for further use before i2c_unregister_device() call. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-mdevice.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index cc337b1de913..d558ae79e320 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -220,6 +220,7 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, sd = v4l2_i2c_new_subdev_board(&fmd->v4l2_dev, adapter, s_info->pdata->board_info, NULL); if (IS_ERR_OR_NULL(sd)) { + i2c_put_adapter(adapter); v4l2_err(&fmd->v4l2_dev, "Failed to acquire subdev\n"); return NULL; } @@ -234,12 +235,15 @@ static struct v4l2_subdev *fimc_md_register_sensor(struct fimc_md *fmd, static void fimc_md_unregister_sensor(struct v4l2_subdev *sd) { struct i2c_client *client = v4l2_get_subdevdata(sd); + struct i2c_adapter *adapter; if (!client) return; v4l2_device_unregister_subdev(sd); + adapter = client->adapter; i2c_unregister_device(client); - i2c_put_adapter(client->adapter); + if (adapter) + i2c_put_adapter(adapter); } static int fimc_md_register_sensor_entities(struct fimc_md *fmd) -- cgit v1.2.3-70-g09d2 From 64c570f505a0eac4914402bb7832d019c44eabd8 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sun, 11 Sep 2011 10:36:13 -0300 Subject: [media] s5p-fimc: Fix error in the capture subdev deinitialization Make sure the subdev pointer is cleared when the subdev object has been freed. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index c8d91b0cd9bd..382dacd23133 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1375,7 +1375,7 @@ static void fimc_destroy_capture_subdev(struct fimc_dev *fimc) media_entity_cleanup(&sd->entity); v4l2_device_unregister_subdev(sd); kfree(sd); - sd = NULL; + fimc->vid_cap.subdev = NULL; } /* Set default format at the sensor and host interface */ -- cgit v1.2.3-70-g09d2 From 7aa9f1844a3aac428ef7977a9f1da706718afe0d Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 4 Nov 2011 09:59:52 -0300 Subject: [media] s5p-fimc: Fix initialization for proper system suspend support ST_LPM bit must not be initially set, so the first resume helper call properly quiesce the device's operation. Also fimc_runtime_suspend() at device remove is unneeded and leads to unbalanced clock disable so remove it. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-core.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 19ca6db38b2f..ef53528934f2 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1615,7 +1615,6 @@ static int fimc_probe(struct platform_device *pdev) pdata = pdev->dev.platform_data; fimc->pdata = pdata; - set_bit(ST_LPM, &fimc->state); init_waitqueue_head(&fimc->irq_queue); spin_lock_init(&fimc->slock); @@ -1780,7 +1779,6 @@ static int __devexit fimc_remove(struct platform_device *pdev) struct fimc_dev *fimc = platform_get_drvdata(pdev); pm_runtime_disable(&pdev->dev); - fimc_runtime_suspend(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); vb2_dma_contig_cleanup_ctx(fimc->alloc_ctx); -- cgit v1.2.3-70-g09d2 From 2c1bb62e217f4f2eb6fa9734dcb331bc09c7768e Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 5 Oct 2011 14:20:45 -0300 Subject: [media] s5p-fimc: Fix buffer dequeue order issue When requested more than 2 buffers the buffer dequeue order was wrong due to erroneous updating FIMC registers in every interrupt handler call. This also fixes regression of resetting the output DMA buffer pointer at wrong time, when some buffers are already queued in hardware. The hardware is reset in the start_streaming callback in order to align the H/W state with the software output buffer pointer (buf_index). Additionally a simple write to S5P_CISCCTRL register is replaced with a read/modification/write to make sure the scaler is not being disabled in fimc_hw_set_scaler(). Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-capture.c | 9 ++++++--- drivers/media/video/s5p-fimc/fimc-core.c | 4 ---- drivers/media/video/s5p-fimc/fimc-reg.c | 15 ++++++++++++--- 3 files changed, 18 insertions(+), 10 deletions(-) diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 382dacd23133..70f741f7659f 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -98,6 +98,10 @@ static int fimc_capture_state_cleanup(struct fimc_dev *fimc, bool suspend) vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); } set_bit(ST_CAPT_SUSPENDED, &fimc->state); + + fimc_hw_reset(fimc); + cap->buf_index = 0; + spin_unlock_irqrestore(&fimc->slock, flags); if (streaming) @@ -137,7 +141,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx) struct fimc_dev *fimc = ctx->fimc_dev; int ret; - if (test_bit(ST_CAPT_APPLY_CFG, &fimc->state)) + if (!test_bit(ST_CAPT_APPLY_CFG, &fimc->state)) return 0; spin_lock(&ctx->slock); @@ -150,7 +154,7 @@ int fimc_capture_config_update(struct fimc_ctx *ctx) fimc_hw_set_rotation(ctx); fimc_prepare_dma_offset(ctx, &ctx->d_frame); fimc_hw_set_out_dma(ctx); - set_bit(ST_CAPT_APPLY_CFG, &fimc->state); + clear_bit(ST_CAPT_APPLY_CFG, &fimc->state); } spin_unlock(&ctx->slock); return ret; @@ -164,7 +168,6 @@ static int start_streaming(struct vb2_queue *q, unsigned int count) int min_bufs; int ret; - fimc_hw_reset(fimc); vid_cap->frame_count = 0; ret = fimc_init_capture(fimc); diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index ef53528934f2..9c3a8c51da4f 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1706,8 +1706,6 @@ static int fimc_runtime_resume(struct device *dev) /* Enable clocks and perform basic initalization */ clk_enable(fimc->clock[CLK_GATE]); fimc_hw_reset(fimc); - if (fimc->variant->out_buf_count > 4) - fimc_hw_set_dma_seq(fimc, 0xF); /* Resume the capture or mem-to-mem device */ if (fimc_capture_busy(fimc)) @@ -1749,8 +1747,6 @@ static int fimc_resume(struct device *dev) return 0; } fimc_hw_reset(fimc); - if (fimc->variant->out_buf_count > 4) - fimc_hw_set_dma_seq(fimc, 0xF); spin_unlock_irqrestore(&fimc->slock, flags); if (fimc_capture_busy(fimc)) diff --git a/drivers/media/video/s5p-fimc/fimc-reg.c b/drivers/media/video/s5p-fimc/fimc-reg.c index 20e664e34163..44f5c2d1920b 100644 --- a/drivers/media/video/s5p-fimc/fimc-reg.c +++ b/drivers/media/video/s5p-fimc/fimc-reg.c @@ -35,6 +35,9 @@ void fimc_hw_reset(struct fimc_dev *dev) cfg = readl(dev->regs + S5P_CIGCTRL); cfg &= ~S5P_CIGCTRL_SWRST; writel(cfg, dev->regs + S5P_CIGCTRL); + + if (dev->variant->out_buf_count > 4) + fimc_hw_set_dma_seq(dev, 0xF); } static u32 fimc_hw_get_in_flip(struct fimc_ctx *ctx) @@ -251,7 +254,14 @@ static void fimc_hw_set_scaler(struct fimc_ctx *ctx) struct fimc_scaler *sc = &ctx->scaler; struct fimc_frame *src_frame = &ctx->s_frame; struct fimc_frame *dst_frame = &ctx->d_frame; - u32 cfg = 0; + + u32 cfg = readl(dev->regs + S5P_CISCCTRL); + + cfg &= ~(S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE | + S5P_CISCCTRL_SCALEUP_H | S5P_CISCCTRL_SCALEUP_V | + S5P_CISCCTRL_SCALERBYPASS | S5P_CISCCTRL_ONE2ONE | + S5P_CISCCTRL_INRGB_FMT_MASK | S5P_CISCCTRL_OUTRGB_FMT_MASK | + S5P_CISCCTRL_INTERLACE | S5P_CISCCTRL_RGB_EXT); if (!(ctx->flags & FIMC_COLOR_RANGE_NARROW)) cfg |= (S5P_CISCCTRL_CSCR2Y_WIDE | S5P_CISCCTRL_CSCY2R_WIDE); @@ -308,9 +318,9 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) fimc_hw_set_scaler(ctx); cfg = readl(dev->regs + S5P_CISCCTRL); + cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); if (variant->has_mainscaler_ext) { - cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); cfg |= S5P_CISCCTRL_MHRATIO_EXT(sc->main_hratio); cfg |= S5P_CISCCTRL_MVRATIO_EXT(sc->main_vratio); writel(cfg, dev->regs + S5P_CISCCTRL); @@ -323,7 +333,6 @@ void fimc_hw_set_mainscaler(struct fimc_ctx *ctx) cfg |= S5P_CIEXTEN_MVRATIO_EXT(sc->main_vratio); writel(cfg, dev->regs + S5P_CIEXTEN); } else { - cfg &= ~(S5P_CISCCTRL_MHRATIO_MASK | S5P_CISCCTRL_MVRATIO_MASK); cfg |= S5P_CISCCTRL_MHRATIO(sc->main_hratio); cfg |= S5P_CISCCTRL_MVRATIO(sc->main_vratio); writel(cfg, dev->regs + S5P_CISCCTRL); -- cgit v1.2.3-70-g09d2 From 5cbf6f16ecc07e9f73107c1adf95013bce9f2cf6 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 7 Oct 2011 07:40:00 -0300 Subject: [media] s5p-fimc: Allow probe() to succeed with null platform data The "s5p-fimc-md" platform device platform_data is used to pass attached camera sensor data. Not allowing device probe() to succeed when it's null prevents using FIMC as a mem-to-mem device only. Fix this by removing the platform_data check against null and registering sensors only if platform_data is specified. Also add logging of the information which /dev/video is assigned to which device during probe(). Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-mdevice.c | 35 +++++++++++++++++------------ 1 file changed, 21 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index d558ae79e320..fc81f6faa39a 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -385,20 +385,28 @@ static void fimc_md_unregister_entities(struct fimc_md *fmd) static int fimc_md_register_video_nodes(struct fimc_md *fmd) { + struct video_device *vdev; int i, ret = 0; for (i = 0; i < FIMC_MAX_DEVS && !ret; i++) { if (!fmd->fimc[i]) continue; - if (fmd->fimc[i]->m2m.vfd) - ret = video_register_device(fmd->fimc[i]->m2m.vfd, - VFL_TYPE_GRABBER, -1); - if (ret) - break; - if (fmd->fimc[i]->vid_cap.vfd) - ret = video_register_device(fmd->fimc[i]->vid_cap.vfd, - VFL_TYPE_GRABBER, -1); + vdev = fmd->fimc[i]->m2m.vfd; + if (vdev) { + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (ret) + break; + v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n", + vdev->name, video_device_node_name(vdev)); + } + + vdev = fmd->fimc[i]->vid_cap.vfd; + if (vdev == NULL) + continue; + ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + v4l2_info(&fmd->v4l2_dev, "Registered %s as /dev/%s\n", + vdev->name, video_device_node_name(vdev)); } return ret; @@ -746,9 +754,6 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) struct fimc_md *fmd; int ret; - if (WARN(!pdev->dev.platform_data, "Platform data not specified!\n")) - return -EINVAL; - fmd = kzalloc(sizeof(struct fimc_md), GFP_KERNEL); if (!fmd) return -ENOMEM; @@ -786,9 +791,11 @@ static int __devinit fimc_md_probe(struct platform_device *pdev) if (ret) goto err3; - ret = fimc_md_register_sensor_entities(fmd); - if (ret) - goto err3; + if (pdev->dev.platform_data) { + ret = fimc_md_register_sensor_entities(fmd); + if (ret) + goto err3; + } ret = fimc_md_create_links(fmd); if (ret) goto err3; -- cgit v1.2.3-70-g09d2 From 9c63afcb02b4313838d83c3660e45544d9fc9976 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 27 May 2011 13:12:23 -0300 Subject: [media] s5p-fimc: Adjust pixel height alignments according to the IP revision Minimum vertical pixel size alignment for input and output DMA and the scaler depend on color format, rotation, the IP instance and revision. Make vertical pixel size of format and crop better fit for each SoC revision and the IP instance by adding min_vsize_align attribute to the FIMC variant data structure. It's now common for the DMA engines and the scaler. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-capture.c | 2 +- drivers/media/video/s5p-fimc/fimc-core.c | 16 +++++++++++----- drivers/media/video/s5p-fimc/fimc-core.h | 2 ++ 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 70f741f7659f..82d9ab6984eb 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -526,7 +526,7 @@ static struct fimc_fmt *fimc_capture_try_format(struct fimc_ctx *ctx, max_w = rotation ? pl->out_rot_en_w : pl->out_rot_dis_w; min_w = ctx->state & FIMC_DST_CROP ? dst->width : var->min_out_pixsize; min_h = ctx->state & FIMC_DST_CROP ? dst->height : var->min_out_pixsize; - if (fimc->id == 1 && var->pix_hoff) + if (var->min_vsize_align == 1 && !rotation) align_h = fimc_fmt_is_rgb(ffmt->color) ? 0 : 1; depth = fimc_get_format_depth(ffmt); diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 9c3a8c51da4f..7c22d78b0569 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -1038,12 +1038,11 @@ static int fimc_try_fmt_mplane(struct fimc_ctx *ctx, struct v4l2_format *f) mod_x = 6; /* 64 x 32 pixels tile */ mod_y = 5; } else { - if (fimc->id == 1 && variant->pix_hoff) + if (variant->min_vsize_align == 1) mod_y = fimc_fmt_is_rgb(fmt->color) ? 0 : 1; else - mod_y = mod_x; + mod_y = ffs(variant->min_vsize_align) - 1; } - dbg("mod_x: %d, mod_y: %d, max_w: %d", mod_x, mod_y, max_w); v4l_bound_align_image(&pix->width, 16, max_w, mod_x, &pix->height, 8, variant->pix_limit->scaler_dis_w, mod_y, 0); @@ -1226,10 +1225,10 @@ static int fimc_m2m_try_crop(struct fimc_ctx *ctx, struct v4l2_crop *cr) fimc->variant->min_inp_pixsize : fimc->variant->min_out_pixsize; /* Get pixel alignment constraints. */ - if (fimc->id == 1 && fimc->variant->pix_hoff) + if (fimc->variant->min_vsize_align == 1) halign = fimc_fmt_is_rgb(f->fmt->color) ? 0 : 1; else - halign = ffs(min_size) - 1; + halign = ffs(fimc->variant->min_vsize_align) - 1; for (i = 0; i < f->fmt->colplanes; i++) depth += f->fmt->depth[i]; @@ -1834,6 +1833,7 @@ static struct samsung_fimc_variant fimc0_variant_s5p = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[0], }; @@ -1843,6 +1843,7 @@ static struct samsung_fimc_variant fimc2_variant_s5p = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[1], }; @@ -1855,6 +1856,7 @@ static struct samsung_fimc_variant fimc0_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[1], }; @@ -1868,6 +1870,7 @@ static struct samsung_fimc_variant fimc1_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 1, + .min_vsize_align = 1, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[2], }; @@ -1878,6 +1881,7 @@ static struct samsung_fimc_variant fimc2_variant_s5pv210 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 8, + .min_vsize_align = 16, .out_buf_count = 4, .pix_limit = &s5p_pix_limit[2], }; @@ -1892,6 +1896,7 @@ static struct samsung_fimc_variant fimc0_variant_exynos4 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 2, + .min_vsize_align = 1, .out_buf_count = 32, .pix_limit = &s5p_pix_limit[1], }; @@ -1904,6 +1909,7 @@ static struct samsung_fimc_variant fimc3_variant_exynos4 = { .min_inp_pixsize = 16, .min_out_pixsize = 16, .hor_offs_align = 2, + .min_vsize_align = 1, .out_buf_count = 32, .pix_limit = &s5p_pix_limit[3], }; diff --git a/drivers/media/video/s5p-fimc/fimc-core.h b/drivers/media/video/s5p-fimc/fimc-core.h index a6936dad5b10..c7f01c47b20f 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.h +++ b/drivers/media/video/s5p-fimc/fimc-core.h @@ -377,6 +377,7 @@ struct fimc_pix_limit { * @min_inp_pixsize: minimum input pixel size * @min_out_pixsize: minimum output pixel size * @hor_offs_align: horizontal pixel offset aligment + * @min_vsize_align: minimum vertical pixel size alignment * @out_buf_count: the number of buffers in output DMA sequence */ struct samsung_fimc_variant { @@ -390,6 +391,7 @@ struct samsung_fimc_variant { u16 min_inp_pixsize; u16 min_out_pixsize; u16 hor_offs_align; + u16 min_vsize_align; u16 out_buf_count; }; -- cgit v1.2.3-70-g09d2 From d12392ec006d94e5cf6c98f7ed56ff0c881ec33f Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 20 Oct 2011 05:15:59 -0300 Subject: [media] s5p-fimc: Fail driver probing when sensor configuration is wrong When a sensor with MIPI-CSI interface is attached through platform data definition and the MIPI-CSI receiver is not selected in kernel configuration s5p-fimc driver probe() will now succeed, issuing only a warning. It was done this way to allow the driver to work even if system configuration is not exactly right. Instead make the driver's probe() fail if a MIPI-CSI sensor was requested but s5p-csis module is not present. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-mdevice.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/s5p-fimc/fimc-mdevice.c b/drivers/media/video/s5p-fimc/fimc-mdevice.c index fc81f6faa39a..615c862f0360 100644 --- a/drivers/media/video/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/video/s5p-fimc/fimc-mdevice.c @@ -514,7 +514,7 @@ static int fimc_md_create_links(struct fimc_md *fmd) if (WARN(csis == NULL, "MIPI-CSI interface specified " "but s5p-csis module is not loaded!\n")) - continue; + return -EINVAL; ret = media_entity_create_link(&sensor->entity, 0, &csis->entity, CSIS_PAD_SINK, -- cgit v1.2.3-70-g09d2 From f83f71fda27650ae43558633be93652577dbc38c Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 4 Nov 2011 10:07:06 -0300 Subject: [media] s5p-fimc: Use correct fourcc for RGB565 colour format With 16-bit RGB565 colour format pixels are stored by the device in memory in the following order: | b3 | b2 | b1 | b0 | ~+-----+-----+-----+-----+ | R5 G6 B5 | R5 G6 B5 | This corresponds to V4L2_PIX_FMT_RGB565 fourcc, not V4L2_PIX_FMT_RGB565X. This change is required to avoid trouble when setting up video pipeline with the s5p-tv devices, so the colour formats at both devices can be properly matched. Cc: Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/s5p-fimc/fimc-core.c b/drivers/media/video/s5p-fimc/fimc-core.c index 7c22d78b0569..07c6254faee3 100644 --- a/drivers/media/video/s5p-fimc/fimc-core.c +++ b/drivers/media/video/s5p-fimc/fimc-core.c @@ -37,7 +37,7 @@ static char *fimc_clocks[MAX_FIMC_CLOCKS] = { static struct fimc_fmt fimc_formats[] = { { .name = "RGB565", - .fourcc = V4L2_PIX_FMT_RGB565X, + .fourcc = V4L2_PIX_FMT_RGB565, .depth = { 16 }, .color = S5P_FIMC_RGB565, .memplanes = 1, -- cgit v1.2.3-70-g09d2 From fbe78ddde1f217044ed854eff92e4d22112871cb Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 16 Nov 2011 08:19:58 -0300 Subject: [media] m5mols: Fix set_fmt to return proper pixel format code In case pixel format is modified in set_fmt by the driver, the changes are not propagated back to the caller. Fix this by adjusting passed data for TRY and ACTIVE format. Also remove redundant pixel format code information from struct m5mols_info, it's already available in 'ffmt' array. Remove pad number validation in set/get_fmt, this is already done in the core. Signed-off-by: Sylwester Nawrocki Acked-by: HeungJun Kim Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/m5mols/m5mols.h | 2 -- drivers/media/video/m5mols/m5mols_core.c | 20 ++++++++------------ 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/media/video/m5mols/m5mols.h b/drivers/media/video/m5mols/m5mols.h index 89d09a8914f8..82c8817bd32d 100644 --- a/drivers/media/video/m5mols/m5mols.h +++ b/drivers/media/video/m5mols/m5mols.h @@ -162,7 +162,6 @@ struct m5mols_version { * @pad: media pad * @ffmt: current fmt according to resolution type * @res_type: current resolution type - * @code: current code * @irq_waitq: waitqueue for the capture * @work_irq: workqueue for the IRQ * @flags: state variable for the interrupt handler @@ -192,7 +191,6 @@ struct m5mols_info { struct media_pad pad; struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX]; int res_type; - enum v4l2_mbus_pixelcode code; wait_queue_head_t irq_waitq; struct work_struct work_irq; unsigned long flags; diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 5d21d056d6a3..68497f8ddcd9 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -510,9 +510,6 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, struct m5mols_info *info = to_m5mols(sd); struct v4l2_mbus_framefmt *format; - if (fmt->pad != 0) - return -EINVAL; - format = __find_format(info, fh, fmt->which, info->res_type); if (!format) return -EINVAL; @@ -531,9 +528,6 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, u32 resolution = 0; int ret; - if (fmt->pad != 0) - return -EINVAL; - ret = __find_resolution(sd, format, &type, &resolution); if (ret < 0) return ret; @@ -542,13 +536,14 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, if (!sfmt) return 0; - *sfmt = m5mols_default_ffmt[type]; - sfmt->width = format->width; - sfmt->height = format->height; + + format->code = m5mols_default_ffmt[type].code; + format->colorspace = V4L2_COLORSPACE_JPEG; + format->field = V4L2_FIELD_NONE; if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) { + *sfmt = *format; info->resolution = resolution; - info->code = format->code; info->res_type = type; } @@ -625,13 +620,14 @@ static int m5mols_start_monitor(struct m5mols_info *info) static int m5mols_s_stream(struct v4l2_subdev *sd, int enable) { struct m5mols_info *info = to_m5mols(sd); + u32 code = info->ffmt[info->res_type].code; if (enable) { int ret = -EINVAL; - if (is_code(info->code, M5MOLS_RESTYPE_MONITOR)) + if (is_code(code, M5MOLS_RESTYPE_MONITOR)) ret = m5mols_start_monitor(info); - if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE)) + if (is_code(code, M5MOLS_RESTYPE_CAPTURE)) ret = m5mols_start_capture(info); return ret; -- cgit v1.2.3-70-g09d2 From 025521f917b9a36d76fb701609b3578b1563818b Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Sun, 20 Nov 2011 12:54:26 -0300 Subject: [media] omap3isp: fix compilation of ispvideo.c Fix following build error by explicitely including header file. CC drivers/media/video/omap3isp/ispvideo.o Signed-off-by: Dmitry Artamonow Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap3isp/ispvideo.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/omap3isp/ispvideo.c b/drivers/media/video/omap3isp/ispvideo.c index d1000723c5ae..f2290578448c 100644 --- a/drivers/media/video/omap3isp/ispvideo.c +++ b/drivers/media/video/omap3isp/ispvideo.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From fc8ac777ae39409e81f7dd2d123d980c0dfb528e Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Mon, 21 Nov 2011 05:02:38 -0300 Subject: [media] media: video: s5p-tv: fix build break This patch fixes following build break: Signed-off-by: Marek Szyprowski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-tv/mixer_video.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/s5p-tv/mixer_video.c b/drivers/media/video/s5p-tv/mixer_video.c index e16d3a4bc1dc..b47d0c06ecf5 100644 --- a/drivers/media/video/s5p-tv/mixer_video.c +++ b/drivers/media/video/s5p-tv/mixer_video.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From ae95757a9065d89be7c1ca613b53163dd30858b7 Mon Sep 17 00:00:00 2001 From: Dave Young Date: Fri, 25 Nov 2011 09:41:25 +0100 Subject: loop: fix loop block driver discard and encryption comment The loop driver does not support discard if encryption is enabled, fix the comment. Signed-off-by: Dave Young Signed-off-by: Jens Axboe --- drivers/block/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 68b205a9338f..5579fda279b4 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -422,7 +422,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio) /* * We use punch hole to reclaim the free space used by the - * image a.k.a. discard. However we do support discard if + * image a.k.a. discard. However we do not support discard if * encryption is enabled, because it may give an attacker * useful information. */ -- cgit v1.2.3-70-g09d2 From a5f70b6717a229ad10aa79382a29a8ee6f1976c3 Mon Sep 17 00:00:00 2001 From: Christian Hitz Date: Mon, 24 Oct 2011 08:57:32 +0200 Subject: ARM: at91: fix NAND bus width decoding from system_rev Make it is safe to assign the return value of this function to u8/u16 variables. Signed-off-by: Christian Hitz Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/system_rev.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h index 8f4866045b41..ec164a4124c9 100644 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -19,7 +19,7 @@ #define BOARD_HAVE_NAND_16BIT (1 << 31) static inline int board_have_nand_16bit(void) { - return system_rev & BOARD_HAVE_NAND_16BIT; + return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; } #endif /* __ARCH_SYSTEM_REV_H__ */ -- cgit v1.2.3-70-g09d2 From 6225da481597ebff09454c785fe0afc7f5fdbb77 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 28 Nov 2011 20:12:05 +0100 Subject: cciss: Add IRQF_SHARED back in for the non-MSI(X) interrupt handler IRQF_SHARED is required for older controllers that don't support MSI(X) and which may end up sharing an interrupt. Also remove deprecated IRQF_DISABLED. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 8004ac30a7a8..6f22ed0dab65 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -4880,7 +4880,7 @@ static int cciss_request_irq(ctlr_info_t *h, { if (h->msix_vector || h->msi_vector) { if (!request_irq(h->intr[h->intr_mode], msixhandler, - IRQF_DISABLED, h->devname, h)) + 0, h->devname, h)) return 0; dev_err(&h->pdev->dev, "Unable to get msi irq %d" " for %s\n", h->intr[h->intr_mode], @@ -4889,7 +4889,7 @@ static int cciss_request_irq(ctlr_info_t *h, } if (!request_irq(h->intr[h->intr_mode], intxhandler, - IRQF_DISABLED, h->devname, h)) + IRQF_SHARED, h->devname, h)) return 0; dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n", h->intr[h->intr_mode], h->devname); -- cgit v1.2.3-70-g09d2 From 59bd71a81b66990564eac69aedd28ad87a2c81f4 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Mon, 28 Nov 2011 20:12:05 +0100 Subject: cciss: fix flush cache transfer length We weren't filling in the transfer length of the flush cache command (it transfers 4 bytes of zeroes). Firmware didn't seem to be bothered by this, but it should be fixed. Signed-off-by: Stephen M. Cameron Signed-off-by: Jens Axboe --- drivers/block/cciss.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 6f22ed0dab65..587cce57adae 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -2601,6 +2601,8 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff, c->Request.Timeout = 0; c->Request.CDB[0] = BMIC_WRITE; c->Request.CDB[6] = BMIC_CACHE_FLUSH; + c->Request.CDB[7] = (size >> 8) & 0xFF; + c->Request.CDB[8] = size & 0xFF; break; case TEST_UNIT_READY: c->Request.CDBLen = 6; -- cgit v1.2.3-70-g09d2 From 786228ab3095fe18dba3bc0d62055a123991d9d9 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Wed, 23 Nov 2011 20:56:45 +0800 Subject: writeback: Fix issue on make htmldocs Document the @reason parameter to make "make htmldocs" happy. Acked-by: Randy Dunlap Signed-off-by: Marcos Paulo de Souza Signed-off-by: Wu Fengguang --- fs/fs-writeback.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 73c3992b2bb4..ac86f8b3e3cb 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -156,6 +156,7 @@ __bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages, * bdi_start_writeback - start writeback * @bdi: the backing device to write from * @nr_pages: the number of pages to write + * @reason: reason why some writeback work was initiated * * Description: * This does WB_SYNC_NONE opportunistic writeback. The IO is only @@ -1223,6 +1224,7 @@ static void wait_sb_inodes(struct super_block *sb) * writeback_inodes_sb_nr - writeback dirty inodes from given super_block * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1251,6 +1253,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_nr); /** * writeback_inodes_sb - writeback dirty inodes from given super_block * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Start writeback on some inodes on this super_block. No guarantees are made * on how many (if any) will be written, and this function does not wait @@ -1265,6 +1268,7 @@ EXPORT_SYMBOL(writeback_inodes_sb); /** * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. @@ -1285,6 +1289,7 @@ EXPORT_SYMBOL(writeback_inodes_sb_if_idle); * writeback_inodes_sb_if_idle - start writeback if none underway * @sb: the superblock * @nr: the number of pages to write + * @reason: reason why some writeback work was initiated * * Invoke writeback_inodes_sb if no writeback is currently underway. * Returns 1 if writeback was started, 0 if not. -- cgit v1.2.3-70-g09d2 From 2984ff38ccf6cbc02a7a996a36c7d6f69f3c6146 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Wed, 30 Nov 2011 15:47:48 +0100 Subject: cfq-iosched: free cic_index if blkio_alloc_blkg_stats fails If we fail allocating the blkpg stats, we free cfqd and cfgq. But we need to free the IDA cfqd->cic_index as well. Signed-off-by: majianpeng Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 16ace89613bc..3beed83437a3 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -4036,6 +4036,11 @@ static void *cfq_init_queue(struct request_queue *q) if (blkio_alloc_blkg_stats(&cfqg->blkg)) { kfree(cfqg); + + spin_lock(&cic_index_lock); + ida_remove(&cic_index_ida, cfqd->cic_index); + spin_unlock(&cic_index_lock); + kfree(cfqd); return NULL; } -- cgit v1.2.3-70-g09d2 From 1808958d27b1250295f01dff4997d8a8814adaab Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Mon, 28 Nov 2011 12:53:08 +0100 Subject: ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20 The conid is supposed to be t0/t1/t2_clk. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91sam9260.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index b84a9f642f59..0d20677fbef0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -195,9 +195,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), - CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), - CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), - CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), -- cgit v1.2.3-70-g09d2 From 0e934e22f3fabb98c41737e2e30bd9db2668e935 Mon Sep 17 00:00:00 2001 From: Anders Darander Date: Wed, 30 Nov 2011 08:47:44 +0100 Subject: ARM: at91: Fix USB AT91 gadget registration Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't register at91_udc anymore due to depending on a now non-existing symbol. Fix the symbol name. Signed-off-by: Anders Darander Signed-off-by: Nicolas Ferre Cc: stable --- arch/arm/mach-at91/at91rm9200_devices.c | 2 +- arch/arm/mach-at91/at91sam9260_devices.c | 2 +- arch/arm/mach-at91/at91sam9261_devices.c | 2 +- arch/arm/mach-at91/at91sam9263_devices.c | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 66591fa53e05..ad930688358c 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 25e3464fb07f..629fa9774972 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ae78f4d03b73..a178b58b0b9c 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index ad017eb1f8df..d5fbac9ff4fa 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {} * USB Device (Gadget) * -------------------------------------------------------------------- */ -#ifdef CONFIG_USB_GADGET_AT91 +#ifdef CONFIG_USB_AT91 static struct at91_udc_data udc_data; static struct resource udc_resources[] = { -- cgit v1.2.3-70-g09d2 From 2a3267a489f1dc4284b64a4b88c62011946dc7ff Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:35:29 +0800 Subject: arm/imx: fix return type of callback passed to of_irq_init() The of_irq_init() expects the callback passed by .data of of_device_id return 'int' instead of 'void'. This patch fixes it to have irq_init_cb() return the correct value, and in turn have the secondary interrupt controller (gpio in this case) initialized properly and also eliminate the error message 'of_irq_init: children remain, but no parents' which was overlooked before. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 4 +++- arch/arm/mach-mx5/imx51-dt.c | 7 +++++-- arch/arm/mach-mx5/imx53-dt.c | 7 +++++-- 3 files changed, 13 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 8bf5fa349484..eb7531bdfed7 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -36,7 +36,7 @@ static void __init imx6q_map_io(void) imx_scu_map_io(); } -static void __init imx6q_gpio_add_irq_domain(struct device_node *np, +static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -44,6 +44,8 @@ static void __init imx6q_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx6q_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index ccc61585659b..3451a463a79a 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -44,13 +44,14 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx51_tzic_add_irq_domain(struct device_node *np, +static int __init imx51_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx51_gpio_add_irq_domain(struct device_node *np, +static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -58,6 +59,8 @@ static void __init imx51_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx51_irq_match[] __initconst = { diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index ccaa0b81b768..022bc0364b5f 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -48,13 +48,14 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static void __init imx53_tzic_add_irq_domain(struct device_node *np, +static int __init imx53_tzic_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { irq_domain_add_simple(np, 0); + return 0; } -static void __init imx53_gpio_add_irq_domain(struct device_node *np, +static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - @@ -62,6 +63,8 @@ static void __init imx53_gpio_add_irq_domain(struct device_node *np, irq_domain_add_simple(np, gpio_irq_base); gpio_irq_base += 32; + + return 0; } static const struct of_device_id imx53_irq_match[] __initconst = { -- cgit v1.2.3-70-g09d2 From 04aafd713bae8a75933c7821dc012b0ec9046bca Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Thu, 1 Dec 2011 14:49:29 +0800 Subject: arm/imx: fix irq_base for gpio When gpio core dynamically allocate gpio number for a port, it starts from the end of the total range, 0 ~ ARCH_NR_GPIOS. That said, the earlier a port gets probed, the bigger gpio number it gets assigned. To match this, the irq_base for gpio should be assigned from 'MXC_GPIO_IRQ_START + ARCH_NR_GPIOS' decreasingly. Signed-off-by: Shawn Guo --- arch/arm/mach-imx/mach-imx6q.c | 5 ++--- arch/arm/mach-mx5/imx51-dt.c | 5 ++--- arch/arm/mach-mx5/imx53-dt.c | 5 ++--- 3 files changed, 6 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index eb7531bdfed7..22aa54aa9b2a 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -39,11 +39,10 @@ static void __init imx6q_map_io(void) static int __init imx6q_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx6q gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-mx5/imx51-dt.c index 3451a463a79a..596edd967dbf 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-mx5/imx51-dt.c @@ -54,11 +54,10 @@ static int __init imx51_tzic_add_irq_domain(struct device_node *np, static int __init imx51_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 4; /* imx51 gets 4 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-mx5/imx53-dt.c index 022bc0364b5f..85bfd5ff21b0 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-mx5/imx53-dt.c @@ -58,11 +58,10 @@ static int __init imx53_tzic_add_irq_domain(struct device_node *np, static int __init imx53_gpio_add_irq_domain(struct device_node *np, struct device_node *interrupt_parent) { - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS - - 32 * 7; /* imx53 gets 7 gpio ports */ + static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; + gpio_irq_base -= 32; irq_domain_add_simple(np, gpio_irq_base); - gpio_irq_base += 32; return 0; } -- cgit v1.2.3-70-g09d2 From 7fdcf13b292e8b2e38e42de24be2503e37b2cf97 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 1 Dec 2011 14:00:15 -0500 Subject: SUNRPC: Fix the execution time statistics in the face of RPC restarts If the rpc_task gets restarted, then we want to ensure that we don't double-count the execution time statistics, timeout data, etc. Signed-off-by: Trond Myklebust --- net/sunrpc/sched.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index d12ffa545811..00a1a2acd587 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -590,6 +590,27 @@ void rpc_prepare_task(struct rpc_task *task) task->tk_ops->rpc_call_prepare(task, task->tk_calldata); } +static void +rpc_init_task_statistics(struct rpc_task *task) +{ + /* Initialize retry counters */ + task->tk_garb_retry = 2; + task->tk_cred_retry = 2; + task->tk_rebind_retry = 2; + + /* starting timestamp */ + task->tk_start = ktime_get(); +} + +static void +rpc_reset_task_statistics(struct rpc_task *task) +{ + task->tk_timeouts = 0; + task->tk_flags &= ~(RPC_CALL_MAJORSEEN|RPC_TASK_KILLED|RPC_TASK_SENT); + + rpc_init_task_statistics(task); +} + /* * Helper that calls task->tk_ops->rpc_call_done if it exists */ @@ -602,6 +623,7 @@ void rpc_exit_task(struct rpc_task *task) WARN_ON(RPC_ASSASSINATED(task)); /* Always release the RPC slot and buffer memory */ xprt_release(task); + rpc_reset_task_statistics(task); } } } @@ -804,11 +826,6 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta task->tk_calldata = task_setup_data->callback_data; INIT_LIST_HEAD(&task->tk_task); - /* Initialize retry counters */ - task->tk_garb_retry = 2; - task->tk_cred_retry = 2; - task->tk_rebind_retry = 2; - task->tk_priority = task_setup_data->priority - RPC_PRIORITY_LOW; task->tk_owner = current->tgid; @@ -818,8 +835,7 @@ static void rpc_init_task(struct rpc_task *task, const struct rpc_task_setup *ta if (task->tk_ops->rpc_call_prepare != NULL) task->tk_action = rpc_prepare_task; - /* starting timestamp */ - task->tk_start = ktime_get(); + rpc_init_task_statistics(task); dprintk("RPC: new task initialized, procpid %u\n", task_pid_nr(current)); -- cgit v1.2.3-70-g09d2 From c25573b5134294c0be82bfaecc6d08136835b271 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 1 Dec 2011 14:16:17 -0500 Subject: SUNRPC: Ensure we always bump the backlog queue in xprt_free_slot Whenever we free a slot, we know that the resulting xprt->num_reqs will be less than xprt->max_reqs, so we know that we can release at least one backlogged rpc_task. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>=3.1] --- net/sunrpc/xprt.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index f4385e45a5fc..c64c0ef519b5 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -995,13 +995,11 @@ out_init_req: static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req) { - if (xprt_dynamic_free_slot(xprt, req)) - return; - - memset(req, 0, sizeof(*req)); /* mark unused */ - spin_lock(&xprt->reserve_lock); - list_add(&req->rq_list, &xprt->free); + if (!xprt_dynamic_free_slot(xprt, req)) { + memset(req, 0, sizeof(*req)); /* mark unused */ + list_add(&req->rq_list, &xprt->free); + } rpc_wake_up_next(&xprt->backlog); spin_unlock(&xprt->reserve_lock); } -- cgit v1.2.3-70-g09d2 From 4f38e4aadcca319650c0de31edf7193d7c384de2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 1 Dec 2011 16:31:34 -0500 Subject: NFSv4: Don't error if we handled it in nfs4_recovery_handle_error If we handled an error condition, then nfs4_recovery_handle_error should return '0' so that the state recovery thread can continue. Also ensure that nfs4_check_lease() continues to abort if we haven't got any credentials by having it return ENOKEY (which is not handled). Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 39914be40b03..1da95e3947bb 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1350,12 +1350,14 @@ static void nfs4_warn_keyexpired(const char *s) static int nfs4_recovery_handle_error(struct nfs_client *clp, int error) { switch (error) { + case 0: + break; case -NFS4ERR_CB_PATH_DOWN: nfs_handle_cb_pathdown(clp); - return 0; + break; case -NFS4ERR_NO_GRACE: nfs4_state_end_reclaim_reboot(clp); - return 0; + break; case -NFS4ERR_STALE_CLIENTID: case -NFS4ERR_LEASE_MOVED: set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state); @@ -1375,13 +1377,15 @@ static int nfs4_recovery_handle_error(struct nfs_client *clp, int error) case -NFS4ERR_SEQ_MISORDERED: set_bit(NFS4CLNT_SESSION_RESET, &clp->cl_state); /* Zero session reset errors */ - return 0; + break; case -EKEYEXPIRED: /* Nothing we can do */ nfs4_warn_keyexpired(clp->cl_hostname); - return 0; + break; + default: + return error; } - return error; + return 0; } static int nfs4_do_reclaim(struct nfs_client *clp, const struct nfs4_state_recovery_ops *ops) @@ -1428,7 +1432,7 @@ static int nfs4_check_lease(struct nfs_client *clp) struct rpc_cred *cred; const struct nfs4_state_maintenance_ops *ops = clp->cl_mvops->state_renewal_ops; - int status = -NFS4ERR_EXPIRED; + int status; /* Is the client already known to have an expired lease? */ if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state)) @@ -1438,6 +1442,7 @@ static int nfs4_check_lease(struct nfs_client *clp) spin_unlock(&clp->cl_lock); if (cred == NULL) { cred = nfs4_get_setclientid_cred(clp); + status = -ENOKEY; if (cred == NULL) goto out; } @@ -1662,10 +1667,10 @@ static void nfs4_state_manager(struct nfs_client *clp) if (test_and_clear_bit(NFS4CLNT_CHECK_LEASE, &clp->cl_state)) { status = nfs4_check_lease(clp); + if (status < 0) + goto out_error; if (test_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state)) continue; - if (status < 0 && status != -NFS4ERR_CB_PATH_DOWN) - goto out_error; } /* Initialize or reset the session */ -- cgit v1.2.3-70-g09d2 From 111d489f0fb431f4ae85d96851fbf8d3248c09d8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 1 Dec 2011 16:37:42 -0500 Subject: NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits. Currently, the code assumes that the SEQUENCE status bits are mutually exclusive. They are not... Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>= 2.6.34] --- fs/nfs/nfs4state.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 1da95e3947bb..da8d73ed9e0f 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1530,16 +1530,16 @@ void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags) { if (!flags) return; - else if (flags & SEQ4_STATUS_RESTART_RECLAIM_NEEDED) + if (flags & SEQ4_STATUS_RESTART_RECLAIM_NEEDED) nfs41_handle_server_reboot(clp); - else if (flags & (SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED | + if (flags & (SEQ4_STATUS_EXPIRED_ALL_STATE_REVOKED | SEQ4_STATUS_EXPIRED_SOME_STATE_REVOKED | SEQ4_STATUS_ADMIN_STATE_REVOKED | SEQ4_STATUS_LEASE_MOVED)) nfs41_handle_state_revoked(clp); - else if (flags & SEQ4_STATUS_RECALLABLE_STATE_REVOKED) + if (flags & SEQ4_STATUS_RECALLABLE_STATE_REVOKED) nfs41_handle_recallable_state_revoked(clp); - else if (flags & (SEQ4_STATUS_CB_PATH_DOWN | + if (flags & (SEQ4_STATUS_CB_PATH_DOWN | SEQ4_STATUS_BACKCHANNEL_FAULT | SEQ4_STATUS_CB_PATH_DOWN_SESSION)) nfs41_handle_cb_path_down(clp); -- cgit v1.2.3-70-g09d2 From a50527b19c62c808a7fca022816fff88a50b948d Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 2 Dec 2011 09:17:02 +0800 Subject: fs: Make write(2) interruptible by a fatal signal Currently write(2) to a file is not interruptible by any signal. Sometimes this is desirable, e.g. when you want to quickly kill a process hogging your disk. Also, with commit 499d05ecf990 ("mm: Make task in balance_dirty_pages() killable"), it's necessary to abort the current write accordingly to avoid it quickly dirtying lots more pages at unthrottled rate. This patch makes write interruptible by SIGKILL. We do not allow write to be interruptible by any other signal because that has larger potential of screwing some badly written applications. Reported-by: Kazuya Mio Tested-by: Kazuya Mio Acked-by: Matthew Wilcox Signed-off-by: Jan Kara Signed-off-by: Wu Fengguang --- mm/filemap.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index c0018f2d50e0..c106d3b3cc64 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -2407,7 +2407,6 @@ static ssize_t generic_perform_write(struct file *file, iov_iter_count(i)); again: - /* * Bring in the user page that we will copy from _first_. * Otherwise there's a nasty deadlock on copying from the @@ -2463,7 +2462,10 @@ again: written += copied; balance_dirty_pages_ratelimited(mapping); - + if (fatal_signal_pending(current)) { + status = -EINTR; + break; + } } while (iov_iter_count(i)); return written ? written : status; -- cgit v1.2.3-70-g09d2 From 650f7a72b8cc235ffe4a0e3eff37954349026721 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 1 Dec 2011 17:47:06 -0800 Subject: ARM: OMAP1: Fix reprogramming of DPLL1 for systems that boot at rates below 60MHz Commit e9b7086b80c4d9e354f4edc9e280ae85a60df408 (ARM: OMAP: Fix reprogramming of dpll1 rate) fixed a regression for systems that did not rely on bootloader set rates. However, it also introduced a new problem where the rates selected in .config would not take affect as omap1_select_table_rate currently refuses to reprogram DPLL1 if it's already initialized. This was not a problem earlier, as the reprogramming was done earlier with ck_dpll1_p->rate uninitialized. Fix this by forcing the reprogramming on systems booting at rates below 60MHz. Note that the long term fix is to make the rates SoC specific later on. Thanks for Janusz Krzysztofik for figuring this one out. Reported-by: Janusz Krzysztofik Acked-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 1297bb58869c..3f305610efa0 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -930,6 +930,9 @@ void __init omap1_clk_late_init(void) if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) return; + /* System booting at unusable rate, force reprogramming of DPLL1 */ + ck_dpll1_p->rate = 0; + /* Find the highest supported frequency and enable it */ if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); -- cgit v1.2.3-70-g09d2 From b29e23547ecb2a609777288cd81fc83b01f9f43f Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:30:39 +0100 Subject: ARM: OMAP1: Remove unsafe clock values from omap1_defconfig DPLL1 reprogramming to a different rate is actually blocked inside omap1_select_table_rate(), resulting in the defalut rate of 60 MHz always used instead of the one selected in .config. OTOH, in omap1_defconfig we currently rely on Kconfig options for the supported MHz rates in case of boards which boot with dpll1 not set correctly by their boot loaders. This means that before we allow for reprogramming of dpll1 rate, we should remove all unsafe clock selections from omap1_defconfig, otherwise it will stop booting on boards with imperfect boot loaders, as it would always try to change to 216MHz. Keep only one safe clock rate per each supported xtal frequency, i.e. 60MHZ dpll1 for 12MHz xtal and 182MHz dpll1 for 13MHz xtal. BTW, this change goes into the direction of removing all OMAP1 clock rate options, planned for next merge window. Signed-off-by: Janusz Krzysztofik Signed-off-by: Tony Lindgren --- arch/arm/configs/omap1_defconfig | 5 ----- 1 file changed, 5 deletions(-) diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index a7e777581378..945a34f2a34d 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -48,12 +48,7 @@ CONFIG_MACH_SX1=y CONFIG_MACH_NOKIA770=y CONFIG_MACH_AMS_DELTA=y CONFIG_MACH_OMAP_GENERIC=y -CONFIG_OMAP_ARM_216MHZ=y -CONFIG_OMAP_ARM_195MHZ=y -CONFIG_OMAP_ARM_192MHZ=y CONFIG_OMAP_ARM_182MHZ=y -CONFIG_OMAP_ARM_168MHZ=y -# CONFIG_OMAP_ARM_60MHZ is not set # CONFIG_ARM_THUMB is not set CONFIG_PCCARD=y CONFIG_OMAP_CF=y -- cgit v1.2.3-70-g09d2 From c2cb211116192690605eaa70d39deb04241003e2 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:01 +0100 Subject: ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate Use the exact value found in omap1_rate_table, otherwise I have been experiencing issues with correct timekeeping on my Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 3f305610efa0..86b2dec11788 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -937,7 +937,7 @@ void __init omap1_clk_late_init(void) if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) { pr_err("System frequencies not set, using default. Check your config.\n"); omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x2005 : 0x0005, ARM_CKCTL); ck_dpll1.rate = OMAP1_DPLL1_SANE_VALUE; } propagate_rate(&ck_dpll1); -- cgit v1.2.3-70-g09d2 From 1bdfd27a0bd65ccdd7294c1080bdb59f6a5a6e72 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:18:14 +0800 Subject: ARM: CSR: fix build error due to new mdesc->dma_zone_size commit 98b0124f0e2b88 "ARM: mach-prima2: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size" causes building error: arch/arm/mach-prima2/prima2.c:39:19: error: 'SZ_256M' undeclared here (not in a function) Signed-off-by: Barry Song --- arch/arm/mach-prima2/prima2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c index ef555c041962..a12b689a8702 100644 --- a/arch/arm/mach-prima2/prima2.c +++ b/arch/arm/mach-prima2/prima2.c @@ -8,6 +8,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From b2dcb8723eb61d00c40d526702d08f6d805f5f01 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 17 Nov 2011 22:27:22 +0800 Subject: ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE' In the new kernel, we will get the following compile error: arch/arm/mach-prima2/pm.c:141: error: 'THIS_MODULE' undeclared here (not in a function) so include module.h head file explicitly Signed-off-by: Barry Song --- arch/arm/mach-prima2/pm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index cb53160f6c5d..26ebb57719df 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 769bbb634f30c1b76277623676011a77f31bcc20 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Fri, 2 Dec 2011 13:51:56 +0900 Subject: MAINTAINERS: Consolidate Samsung MAINTAINERS These days most Samsung stuff gets in the kernel through Kukjin Kim. This patch changes MAINTAINERS to reflect this. By adding Kukjin Kim to the maintainers for S3C2410, S3C244x and S3C64xx alongside Ben Dooks the extra entries become identical to the base ARM/SAMSUNG entry and can move into it. Also the S3C2416 gets a maintainer through the s3c24* wildcard - as it did not have one until now. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- MAINTAINERS | 24 ++---------------------- 1 file changed, 2 insertions(+), 22 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 447560284996..1445a830b4f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1059,31 +1059,11 @@ S: Maintained F: arch/arm/plat-samsung/ F: arch/arm/plat-s3c24xx/ F: arch/arm/plat-s5p/ +F: arch/arm/mach-s3c24*/ +F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* -ARM/S3C2410 ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2410/ - -ARM/S3C244x ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c2440/ -F: arch/arm/mach-s3c2443/ - -ARM/S3C64xx ARM ARCHITECTURE -M: Ben Dooks -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -W: http://www.fluff.org/ben/linux/ -S: Maintained -F: arch/arm/mach-s3c64xx/ - ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -- cgit v1.2.3-70-g09d2 From 7a549d78e7d897651a4bc36ade7563c34cab9f8b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:52:12 +0900 Subject: MAINTAINERS: Add linux-samsung-soc mailing list for Samsung There's a Samsung-specific mailing list but it's not advertised in MAINTAINERS - add it to the overall architecture to make it more discoverable. Signed-off-by: Mark Brown [kgene.kim@samsung.com: added notice of 'moderated'] Signed-off-by: Kukjin Kim --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 1445a830b4f8..523039045b36 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1054,6 +1054,7 @@ ARM/SAMSUNG ARM ARCHITECTURES M: Ben Dooks M: Kukjin Kim L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) W: http://www.fluff.org/ben/linux/ S: Maintained F: arch/arm/plat-samsung/ -- cgit v1.2.3-70-g09d2 From 40c76662a1ae7f88afa22ae3b1265497e4271f72 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 13:54:25 +0900 Subject: MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers Help people find the overall architecture. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 523039045b36..b4f18024f4e7 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1064,6 +1064,8 @@ F: arch/arm/mach-s3c24*/ F: arch/arm/mach-s3c64xx/ F: drivers/*/*s3c2410* F: drivers/*/*/*s3c2410* +F: drivers/spi/spi-s3c* +F: sound/soc/samsung/* ARM/S5P EXYNOS ARM ARCHITECTURES M: Kukjin Kim -- cgit v1.2.3-70-g09d2 From ade145cc4885fbdf47b3abd9cd6baf23b8367fef Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:36 +0900 Subject: ARM: S3C64XX: Remove extern from definition of framebuffer setup call The extern is only useful on prototypes. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/setup-fb-24bpp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 83d2afb79e9f..2cf80026c58d 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -20,7 +20,7 @@ #include #include -extern void s3c64xx_fb_gpio_setup_24bpp(void) +void s3c64xx_fb_gpio_setup_24bpp(void) { s3c_gpio_cfgrange_nopull(S3C64XX_GPI(0), 16, S3C_GPIO_SFN(2)); s3c_gpio_cfgrange_nopull(S3C64XX_GPJ(0), 12, S3C_GPIO_SFN(2)); -- cgit v1.2.3-70-g09d2 From f4a65ad6eb9b56180724de52ddd6dd6712121be1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:17:54 +0900 Subject: ARM: S3C64XX: Add linux/export.h to dev-spi.c This is required for the EXPORT_SYMBOL()s the code uses, previously the header was being included implicitly by another header. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/dev-spi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 5e6b42089eb4..3341fd118723 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -10,6 +10,7 @@ #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 71b33a4f7c864bf5fc893b5ca144770ad05f1d4a Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 2 Dec 2011 14:18:02 +0900 Subject: ARM: S3C64XX: Staticise s3c6400_sysclass The symbol is not exported and doesn't need to be. Signed-off-by: Mark Brown Cc: stable@kernel.org Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/s3c6400.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 7a3bc32df425..51c00f2453c6 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -70,7 +70,7 @@ void __init s3c6400_init_irq(void) s3c64xx_init_irq(~0 & ~(0xf << 5), ~0); } -struct sysdev_class s3c6400_sysclass = { +static struct sysdev_class s3c6400_sysclass = { .name = "s3c6400-core", }; -- cgit v1.2.3-70-g09d2 From 5d348401ed03450395ce674594c1c08c7d85bd8d Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:05 +0800 Subject: ARM: mxs/tx28: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Lothar Waßmann Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/module-tx28.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/module-tx28.c b/arch/arm/mach-mxs/module-tx28.c index 0fcff47009cf..9a7b08b2a925 100644 --- a/arch/arm/mach-mxs/module-tx28.c +++ b/arch/arm/mach-mxs/module-tx28.c @@ -66,11 +66,11 @@ static const iomux_cfg_t tx28_fec1_pads[] __initconst = { MX28_PAD_ENET0_CRS__ENET1_RX_EN, }; -static struct fec_platform_data tx28_fec0_data = { +static const struct fec_platform_data tx28_fec0_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -static struct fec_platform_data tx28_fec1_data = { +static const struct fec_platform_data tx28_fec1_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.3-70-g09d2 From 8d2d2d1d7e96f12d9fe140169fb39ef9fd27b7c1 Mon Sep 17 00:00:00 2001 From: Lauri Hintsala Date: Mon, 21 Nov 2011 10:55:55 +0200 Subject: ARM: mxs: fix machines' initializers order Initializers of m28evk and stmp378x_devb fixed to be in order they are called. reference: http://article.gmane.org/gmane.linux.ports.arm.omap/50721 Cc: Shawn Guo Signed-off-by: Lauri Hintsala Acked-by: Russell King Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/mach-m28evk.c | 2 +- arch/arm/mach-mxs/mach-stmp378x_devb.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c index 3b1681e4f49a..6b00577b7025 100644 --- a/arch/arm/mach-mxs/mach-m28evk.c +++ b/arch/arm/mach-mxs/mach-m28evk.c @@ -361,6 +361,6 @@ static struct sys_timer m28evk_timer = { MACHINE_START(M28EVK, "DENX M28 EVK") .map_io = mx28_map_io, .init_irq = mx28_init_irq, - .init_machine = m28evk_init, .timer = &m28evk_timer, + .init_machine = m28evk_init, MACHINE_END diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c index 177e53123a02..6834dea38c04 100644 --- a/arch/arm/mach-mxs/mach-stmp378x_devb.c +++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c @@ -115,6 +115,6 @@ static struct sys_timer stmp378x_dvb_timer = { MACHINE_START(STMP378X, "STMP378X") .map_io = mx23_map_io, .init_irq = mx23_init_irq, - .init_machine = stmp378x_dvb_init, .timer = &stmp378x_dvb_timer, + .init_machine = stmp378x_dvb_init, MACHINE_END -- cgit v1.2.3-70-g09d2 From 11357be9246c7d1acf9b37ad54a18b29bbb734be Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 26 Nov 2011 11:39:14 +0100 Subject: arm: mx23: recognise stmp378x as mx23 Adding the machine_is_* line was forgotten when converting mach-stmp378x to mach-mxs. Signed-off-by: Wolfram Sang Signed-off-by: Shawn Guo Cc: stable@kernel.org --- arch/arm/mach-mxs/include/mach/mxs.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h index 0d2d2b470998..bde5f6634747 100644 --- a/arch/arm/mach-mxs/include/mach/mxs.h +++ b/arch/arm/mach-mxs/include/mach/mxs.h @@ -30,6 +30,7 @@ */ #define cpu_is_mx23() ( \ machine_is_mx23evk() || \ + machine_is_stmp378x() || \ 0) #define cpu_is_mx28() ( \ machine_is_mx28evk() || \ -- cgit v1.2.3-70-g09d2 From 7d8b894ca135a896f32934f7d096714d5bc687e6 Mon Sep 17 00:00:00 2001 From: Peter Rusko Date: Wed, 30 Nov 2011 16:43:27 +0100 Subject: ARM: mx28: LRADC macro rename It's a correction of two macro names, renaming them from IRADC to LRADC. Signed-off-by: Peter Rusko Acked-by: Wolfram Sang Signed-off-by: Shawn Guo --- arch/arm/mach-mxs/include/mach/mx28.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-mxs/include/mach/mx28.h b/arch/arm/mach-mxs/include/mach/mx28.h index 75d86118b76a..30c7990f3c01 100644 --- a/arch/arm/mach-mxs/include/mach/mx28.h +++ b/arch/arm/mach-mxs/include/mach/mx28.h @@ -104,8 +104,8 @@ #define MX28_INT_CAN1 9 #define MX28_INT_LRADC_TOUCH 10 #define MX28_INT_HSADC 13 -#define MX28_INT_IRADC_THRESH0 14 -#define MX28_INT_IRADC_THRESH1 15 +#define MX28_INT_LRADC_THRESH0 14 +#define MX28_INT_LRADC_THRESH1 15 #define MX28_INT_LRADC_CH0 16 #define MX28_INT_LRADC_CH1 17 #define MX28_INT_LRADC_CH2 18 -- cgit v1.2.3-70-g09d2 From 5eb46851de3904cd1be9192fdacb8d34deadc1fc Mon Sep 17 00:00:00 2001 From: Yasuaki Ishimatsu Date: Fri, 2 Dec 2011 10:07:07 +0100 Subject: cfq-iosched: fix cfq_cic_link() race confition cfq_cic_link() has race condition. When some processes which shared ioc issue I/O to same block device simultaneously, cfq_cic_link() returns -EEXIST sometimes. The race condition might stop I/O by following steps: step 1: Process A: Issue an I/O to /dev/sda step 2: Process A: Get an ioc (iocA here) in get_io_context() which does not linked with a cic for the device step 3: Process A: Get a new cic for the device (cicA here) in cfq_alloc_io_context() step 4: Process B: Issue an I/O to /dev/sda step 5: Process B: Get iocA in get_io_context() since process A and B share the same ioc step 6: Process B: Get a new cic for the device (cicB here) in cfq_alloc_io_context() since iocA has not been linked with a cic for the device yet step 7: Process A: Link cicA to iocA in cfq_cic_link() step 8: Process A: Dispatch I/O to driver and finish it step 9: Process B: Try to link cicB to iocA in cfq_cic_link() But it fails with showing "cfq: cic link failed!" kernel message, since iocA has already linked with cicA at step 7. step 10: Process B: Wait for finishig I/O in get_request_wait() The function does not wake up, when there is no I/O to the device. When cfq_cic_link() returns -EEXIST, it means ioc has already linked with cic. So when cfq_cic_link() return -EEXIST, retry cfq_cic_lookup(). Signed-off-by: Yasuaki Ishimatsu Cc: stable@kernel.org Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 3beed83437a3..4c12869fcf77 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3184,7 +3184,7 @@ static int cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc, } } - if (ret) + if (ret && ret != -EEXIST) printk(KERN_ERR "cfq: cic link failed!\n"); return ret; @@ -3200,6 +3200,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) { struct io_context *ioc = NULL; struct cfq_io_context *cic; + int ret; might_sleep_if(gfp_mask & __GFP_WAIT); @@ -3207,6 +3208,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) if (!ioc) return NULL; +retry: cic = cfq_cic_lookup(cfqd, ioc); if (cic) goto out; @@ -3215,7 +3217,12 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask) if (cic == NULL) goto err; - if (cfq_cic_link(cfqd, ioc, cic, gfp_mask)) + ret = cfq_cic_link(cfqd, ioc, cic, gfp_mask); + if (ret == -EEXIST) { + /* someone has linked cic to ioc already */ + cfq_cic_free(cic); + goto retry; + } else if (ret) goto err_free; out: -- cgit v1.2.3-70-g09d2 From fc084e0b930d546872ab23667052499f7daf0fed Mon Sep 17 00:00:00 2001 From: David Dillow Date: Thu, 1 Dec 2011 23:26:53 -0500 Subject: ALSA: sis7019 - give slow codecs more time to reset There are some AC97 codec and board combinations that have been observed to take a very long time to respond after the cold reset has completed. In one case, more than 350 ms was required. To allow users to have sound on those platforms, we'll wait up to 500ms for the codec to become ready. As a board may have multiple codecs, with some faster than others to reset, we add a module parameter to inform the driver which codecs should be present. Reported-by: KotCzarny Signed-off-by: David Dillow Cc: Signed-off-by: Takashi Iwai --- sound/pci/sis7019.c | 64 ++++++++++++++++++++++++++++++++++++++++++++--------- 1 file changed, 53 insertions(+), 11 deletions(-) diff --git a/sound/pci/sis7019.c b/sound/pci/sis7019.c index a391e622a192..28dfafb56dd1 100644 --- a/sound/pci/sis7019.c +++ b/sound/pci/sis7019.c @@ -41,6 +41,7 @@ MODULE_SUPPORTED_DEVICE("{{SiS,SiS7019 Audio Accelerator}}"); static int index = SNDRV_DEFAULT_IDX1; /* Index 0-MAX */ static char *id = SNDRV_DEFAULT_STR1; /* ID for this card */ static int enable = 1; +static int codecs = 1; module_param(index, int, 0444); MODULE_PARM_DESC(index, "Index value for SiS7019 Audio Accelerator."); @@ -48,6 +49,8 @@ module_param(id, charp, 0444); MODULE_PARM_DESC(id, "ID string for SiS7019 Audio Accelerator."); module_param(enable, bool, 0444); MODULE_PARM_DESC(enable, "Enable SiS7019 Audio Accelerator."); +module_param(codecs, int, 0444); +MODULE_PARM_DESC(codecs, "Set bit to indicate that codec number is expected to be present (default 1)"); static DEFINE_PCI_DEVICE_TABLE(snd_sis7019_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_SI, 0x7019) }, @@ -140,6 +143,9 @@ struct sis7019 { dma_addr_t silence_dma_addr; }; +/* These values are also used by the module param 'codecs' to indicate + * which codecs should be present. + */ #define SIS_PRIMARY_CODEC_PRESENT 0x0001 #define SIS_SECONDARY_CODEC_PRESENT 0x0002 #define SIS_TERTIARY_CODEC_PRESENT 0x0004 @@ -1078,6 +1084,7 @@ static int sis_chip_init(struct sis7019 *sis) { unsigned long io = sis->ioport; void __iomem *ioaddr = sis->ioaddr; + unsigned long timeout; u16 status; int count; int i; @@ -1104,21 +1111,45 @@ static int sis_chip_init(struct sis7019 *sis) while ((inw(io + SIS_AC97_STATUS) & SIS_AC97_STATUS_BUSY) && --count) udelay(1); + /* Command complete, we can let go of the semaphore now. + */ + outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); + if (!count) + return -EIO; + /* Now that we've finished the reset, find out what's attached. + * There are some codec/board combinations that take an extremely + * long time to come up. 350+ ms has been observed in the field, + * so we'll give them up to 500ms. */ - status = inl(io + SIS_AC97_STATUS); - if (status & SIS_AC97_STATUS_CODEC_READY) - sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC2_READY) - sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; - if (status & SIS_AC97_STATUS_CODEC3_READY) - sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; - - /* All done, let go of the semaphore, and check for errors + sis->codecs_present = 0; + timeout = msecs_to_jiffies(500) + jiffies; + while (time_before_eq(jiffies, timeout)) { + status = inl(io + SIS_AC97_STATUS); + if (status & SIS_AC97_STATUS_CODEC_READY) + sis->codecs_present |= SIS_PRIMARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC2_READY) + sis->codecs_present |= SIS_SECONDARY_CODEC_PRESENT; + if (status & SIS_AC97_STATUS_CODEC3_READY) + sis->codecs_present |= SIS_TERTIARY_CODEC_PRESENT; + + if (sis->codecs_present == codecs) + break; + + msleep(1); + } + + /* All done, check for errors. */ - outl(SIS_AC97_SEMA_RELEASE, io + SIS_AC97_SEMA); - if (!sis->codecs_present || !count) + if (!sis->codecs_present) { + printk(KERN_ERR "sis7019: could not find any codecs\n"); return -EIO; + } + + if (sis->codecs_present != codecs) { + printk(KERN_WARNING "sis7019: missing codecs, found %0x, expected %0x\n", + sis->codecs_present, codecs); + } /* Let the hardware know that the audio driver is alive, * and enable PCM slots on the AC-link for L/R playback (3 & 4) and @@ -1390,6 +1421,17 @@ static int __devinit snd_sis7019_probe(struct pci_dev *pci, if (!enable) goto error_out; + /* The user can specify which codecs should be present so that we + * can wait for them to show up if they are slow to recover from + * the AC97 cold reset. We default to a single codec, the primary. + * + * We assume that SIS_PRIMARY_*_PRESENT matches bits 0-2. + */ + codecs &= SIS_PRIMARY_CODEC_PRESENT | SIS_SECONDARY_CODEC_PRESENT | + SIS_TERTIARY_CODEC_PRESENT; + if (!codecs) + codecs = SIS_PRIMARY_CODEC_PRESENT; + rc = snd_card_create(index, id, THIS_MODULE, sizeof(*sis), &card); if (rc < 0) goto error_out; -- cgit v1.2.3-70-g09d2 From dfaf3c036cd46a73f4ef3e4b75c1f647e503d4e1 Mon Sep 17 00:00:00 2001 From: Lukas Czerner Date: Fri, 2 Dec 2011 14:47:03 +0100 Subject: loop: Fix discard_alignment default setting discard_alignment is not relevant to the loop driver since it is supposed to be set as a workaround for the old sector 63 alignments. So set it to zero rather than block size. Signed-off-by: Lukas Czerner Reported-by: Milan Broz Signed-off-by: Jens Axboe --- drivers/block/loop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 5579fda279b4..1e888c9e85b3 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -797,7 +797,7 @@ static void loop_config_discard(struct loop_device *lo) } q->limits.discard_granularity = inode->i_sb->s_blocksize; - q->limits.discard_alignment = inode->i_sb->s_blocksize; + q->limits.discard_alignment = 0; q->limits.max_discard_sectors = UINT_MAX >> 9; q->limits.discard_zeroes_data = 1; queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q); -- cgit v1.2.3-70-g09d2 From cce4aa378a049f4275416ee6302dd24f37b289df Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 2 Dec 2011 15:29:12 +0100 Subject: ALSA: hda/realtek - Fix Oops in alc_mux_select() When no imux is available (e.g. a single capture source), alc_auto_init_input_src() may trigger an Oops due to the access to -1. Add a proper zero-check to avoid it. Cc: Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index cbde019d3d52..a7d1bc4e0d09 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -297,6 +297,8 @@ static int alc_mux_select(struct hda_codec *codec, unsigned int adc_idx, imux = &spec->input_mux[mux_idx]; if (!imux->num_items && mux_idx > 0) imux = &spec->input_mux[0]; + if (!imux->num_items) + return 0; if (idx >= imux->num_items) idx = imux->num_items - 1; -- cgit v1.2.3-70-g09d2 From 629be5f275ddf0791614f8cbdafc11bde4247850 Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Tue, 22 Nov 2011 15:39:11 +1100 Subject: mtd: ndfc: fix typo in structure dereference In commit 9d7948c50055e74b693ce9e99a709b2e5bbc1942 (mtd: ndfc: use ofpart through generic parsing) we dereference a non pointer type causing the following compiler error: drivers/mtd/nand/ndfc.c: In function 'ndfc_chip_init': drivers/mtd/nand/ndfc.c:191: error: invalid type argument of '->' (have 'struct mtd_part_parser_data') Fix that. Signed-off-by: Tony Breeds Acked-by: Dmitry Eremin-Solenikov Signed-off-by: David Woodhouse --- drivers/mtd/nand/ndfc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index ee1713907b92..f8aacf48ecdd 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -188,7 +188,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, if (!flash_np) return -ENODEV; - ppdata->of_node = flash_np; + ppdata.of_node = flash_np; ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s", dev_name(&ndfc->ofdev->dev), flash_np->name); if (!ndfc->mtd.name) { -- cgit v1.2.3-70-g09d2 From 2151937d7ce491bfbe269a1ae742c6686904474c Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Thu, 1 Dec 2011 08:06:52 -0800 Subject: ceph: fix rasize reporting by ceph_show_options Fix typo. Reported-by: mowang da Signed-off-by: Sage Weil --- fs/ceph/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ceph/super.c b/fs/ceph/super.c index 8dc73a594a90..b48f15f101a0 100644 --- a/fs/ceph/super.c +++ b/fs/ceph/super.c @@ -383,7 +383,7 @@ static int ceph_show_options(struct seq_file *m, struct vfsmount *mnt) if (fsopt->rsize != CEPH_RSIZE_DEFAULT) seq_printf(m, ",rsize=%d", fsopt->rsize); if (fsopt->rasize != CEPH_RASIZE_DEFAULT) - seq_printf(m, ",rasize=%d", fsopt->rsize); + seq_printf(m, ",rasize=%d", fsopt->rasize); if (fsopt->congestion_kb != default_congestion_kb()) seq_printf(m, ",write_congestion_kb=%d", fsopt->congestion_kb); if (fsopt->caps_wanted_delay_min != CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT) -- cgit v1.2.3-70-g09d2 From 87b86ade8bb07473596e2551de7bb64c1f44bbe4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sun, 14 Aug 2011 13:39:20 +0900 Subject: ASoC: Mark WM8994 ADC muxes as virtual Since they don't actually have power bits but do have events associated with them it's important that we bootstrap their state properly which making them virtual does. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8994.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 6c2988549003..d0c545b73d78 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1325,15 +1325,15 @@ SND_SOC_DAPM_DAC("DAC1R", NULL, WM8994_POWER_MANAGEMENT_5, 0, 0), }; static const struct snd_soc_dapm_widget wm8994_adc_revd_widgets[] = { -SND_SOC_DAPM_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), -SND_SOC_DAPM_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, - adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), +SND_SOC_DAPM_VIRT_MUX_E("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux, + adc_mux_ev, SND_SOC_DAPM_PRE_PMU), }; static const struct snd_soc_dapm_widget wm8994_adc_widgets[] = { -SND_SOC_DAPM_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), -SND_SOC_DAPM_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), +SND_SOC_DAPM_VIRT_MUX("ADCL Mux", WM8994_POWER_MANAGEMENT_4, 1, 0, &adcl_mux), +SND_SOC_DAPM_VIRT_MUX("ADCR Mux", WM8994_POWER_MANAGEMENT_4, 0, 0, &adcr_mux), }; static const struct snd_soc_dapm_widget wm8994_dapm_widgets[] = { -- cgit v1.2.3-70-g09d2 From a99ebf43f49f4499ab0e2a8a9132ad6ed6ba2409 Mon Sep 17 00:00:00 2001 From: Dave Chinner Date: Thu, 1 Dec 2011 11:24:20 +0000 Subject: xfs: fix allocation length overflow in xfs_bmapi_write() When testing the new xfstests --large-fs option that does very large file preallocations, this assert was tripped deep in xfs_alloc_vextent(): XFS: Assertion failed: args->minlen <= args->maxlen, file: fs/xfs/xfs_alloc.c, line: 2239 The allocation was trying to allocate a zero length extent because the lower 32 bits of the allocation length was zero. The remaining length of the allocation to be done was an exact multiple of 2^32 - the first case I saw was at 496TB remaining to be allocated. This turns out to be an overflow when converting the allocation length (a 64 bit quantity) into the extent length to allocate (a 32 bit quantity), and it requires the length to be allocated an exact multiple of 2^32 blocks to trip the assert. Fix it by limiting the extent lenth to allocate to MAXEXTLEN. Signed-off-by: Dave Chinner Signed-off-by: Ben Myers Reviewed-by: Christoph Hellwig --- fs/xfs/xfs_bmap.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index c68baeb0974a..d0ab78837057 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -2383,6 +2383,8 @@ xfs_bmap_btalloc( int tryagain; int error; + ASSERT(ap->length); + mp = ap->ip->i_mount; align = ap->userdata ? xfs_get_extsz_hint(ap->ip) : 0; if (unlikely(align)) { @@ -4629,6 +4631,8 @@ xfs_bmapi_allocate( int error; int rt; + ASSERT(bma->length > 0); + rt = (whichfork == XFS_DATA_FORK) && XFS_IS_REALTIME_INODE(bma->ip); /* @@ -4849,6 +4853,7 @@ xfs_bmapi_write( ASSERT(*nmap <= XFS_BMAP_MAX_NMAP); ASSERT(!(flags & XFS_BMAPI_IGSTATE)); ASSERT(tp != NULL); + ASSERT(len > 0); whichfork = (flags & XFS_BMAPI_ATTRFORK) ? XFS_ATTR_FORK : XFS_DATA_FORK; @@ -4918,9 +4923,22 @@ xfs_bmapi_write( bma.eof = eof; bma.conv = !!(flags & XFS_BMAPI_CONVERT); bma.wasdel = wasdelay; - bma.length = len; bma.offset = bno; + /* + * There's a 32/64 bit type mismatch between the + * allocation length request (which can be 64 bits in + * length) and the bma length request, which is + * xfs_extlen_t and therefore 32 bits. Hence we have to + * check for 32-bit overflows and handle them here. + */ + if (len > (xfs_filblks_t)MAXEXTLEN) + bma.length = MAXEXTLEN; + else + bma.length = len; + + ASSERT(len > 0); + ASSERT(bma.length > 0); error = xfs_bmapi_allocate(&bma, flags); if (error) goto error0; -- cgit v1.2.3-70-g09d2 From 36d54dc0c893b143748bcf13a1e3b7a00696115d Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 3 Dec 2011 18:38:25 +0800 Subject: ASoC: kirkwood: Make SND_KIRKWOOD_SOC_OPENRD and SND_KIRKWOOD_SOC_T5325 depend on I2C SND_KIRKWOOD_SOC_T5325 selects SND_SOC_ALC5623, but SND_SOC_ALC5623 needs CONFIG_I2C. So we need to make SND_KIRKWOOD_SOC_T5325 depend on I2C, otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/alc5623.o sound/soc/codecs/alc5623.c: In function 'alc5623_i2c_probe': sound/soc/codecs/alc5623.c:1002: error: implicit declaration of function 'i2c_smbus_read_word_data' sound/soc/codecs/alc5623.c:1009: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/alc5623.c: In function 'alc5623_modinit': sound/soc/codecs/alc5623.c:1096: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/alc5623.c: In function 'alc5623_modexit': sound/soc/codecs/alc5623.c:1108: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/alc5623.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Also fix the same issue for SND_KIRKWOOD_SOC_OPENRD. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/kirkwood/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/kirkwood/Kconfig b/sound/soc/kirkwood/Kconfig index 8f49e165f4d1..c62d715235e2 100644 --- a/sound/soc/kirkwood/Kconfig +++ b/sound/soc/kirkwood/Kconfig @@ -12,6 +12,7 @@ config SND_KIRKWOOD_SOC_I2S config SND_KIRKWOOD_SOC_OPENRD tristate "SoC Audio support for Kirkwood Openrd Client" depends on SND_KIRKWOOD_SOC && (MACH_OPENRD_CLIENT || MACH_OPENRD_ULTIMATE) + depends on I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_CS42L51 help @@ -20,7 +21,7 @@ config SND_KIRKWOOD_SOC_OPENRD config SND_KIRKWOOD_SOC_T5325 tristate "SoC Audio support for HP t5325" - depends on SND_KIRKWOOD_SOC && MACH_T5325 + depends on SND_KIRKWOOD_SOC && MACH_T5325 && I2C select SND_KIRKWOOD_SOC_I2S select SND_SOC_ALC5623 help -- cgit v1.2.3-70-g09d2 From 3989efb77046ad334518b6cddcf817184affe7c9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 11:37:20 -0500 Subject: arch/tile: add a few #includes and an EXPORT to catch up with kernel changes. The empty_zero_page[] export is required for ZERO_PAGE() module references. The #includes are due to changes in implicit inclusion, and should of course have been in the sources from the beginning. Signed-off-by: Chris Metcalf --- arch/tile/kernel/pci-dma.c | 1 + arch/tile/kernel/pci.c | 1 + arch/tile/kernel/sysfs.c | 1 + arch/tile/lib/exports.c | 3 +++ 4 files changed, 6 insertions(+) diff --git a/arch/tile/kernel/pci-dma.c b/arch/tile/kernel/pci-dma.c index 658f2ce426a4..b3ed19f8779c 100644 --- a/arch/tile/kernel/pci-dma.c +++ b/arch/tile/kernel/pci-dma.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index 2a8014cb1ff5..9d610d3fb11e 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include diff --git a/arch/tile/kernel/sysfs.c b/arch/tile/kernel/sysfs.c index b671a86f4515..602908268093 100644 --- a/arch/tile/kernel/sysfs.c +++ b/arch/tile/kernel/sysfs.c @@ -18,6 +18,7 @@ #include #include #include +#include #include /* Return a string queried from the hypervisor, truncated to page size. */ diff --git a/arch/tile/lib/exports.c b/arch/tile/lib/exports.c index a87d2a859ba9..2a81d32de0da 100644 --- a/arch/tile/lib/exports.c +++ b/arch/tile/lib/exports.c @@ -39,6 +39,9 @@ EXPORT_SYMBOL(finv_user_asm); EXPORT_SYMBOL(current_text_addr); EXPORT_SYMBOL(dump_stack); +/* arch/tile/kernel/head.S */ +EXPORT_SYMBOL(empty_zero_page); + /* arch/tile/lib/, various memcpy files */ EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(__copy_to_user_inatomic); -- cgit v1.2.3-70-g09d2 From c2851a9b1caa420c2cdbd517617166990e3723c0 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:51:05 -0500 Subject: arch/tile: fix double-free bug in homecache_free_pages() When freeing the page with this API, the page was "put" twice. This was only discovered bringing up an MPT fusion controller, which actually used the API; it hadn't been invoked previously, so the bug had gone unnoticed. Signed-off-by: Chris Metcalf --- arch/tile/mm/homecache.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/arch/tile/mm/homecache.c b/arch/tile/mm/homecache.c index cbe6f4f9eca3..1cc6ae477c98 100644 --- a/arch/tile/mm/homecache.c +++ b/arch/tile/mm/homecache.c @@ -449,9 +449,12 @@ void homecache_free_pages(unsigned long addr, unsigned int order) VM_BUG_ON(!virt_addr_valid((void *)addr)); page = virt_to_page((void *)addr); if (put_page_testzero(page)) { - int pages = (1 << order); homecache_change_page_home(page, order, initial_page_home()); - while (pages--) - __free_page(page++); + if (order == 0) { + free_hot_cold_page(page, 0); + } else { + init_page_count(page); + __free_pages(page, order); + } } } -- cgit v1.2.3-70-g09d2 From a67ba43d30bf8c1cfdc2615439455302d2408453 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:54:31 -0500 Subject: asm-generic/unistd.h: support new process_vm_{readv,write} syscalls Also prototype the "compat" functions so they can be referenced from C code. Signed-off-by: Chris Metcalf Acked-by: Arnd Bergmann --- include/asm-generic/unistd.h | 8 +++++++- include/linux/compat.h | 9 +++++++++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/asm-generic/unistd.h b/include/asm-generic/unistd.h index f4c38d8c6674..2292d1af9d70 100644 --- a/include/asm-generic/unistd.h +++ b/include/asm-generic/unistd.h @@ -685,9 +685,15 @@ __SYSCALL(__NR_syncfs, sys_syncfs) __SYSCALL(__NR_setns, sys_setns) #define __NR_sendmmsg 269 __SC_COMP(__NR_sendmmsg, sys_sendmmsg, compat_sys_sendmmsg) +#define __NR_process_vm_readv 270 +__SC_COMP(__NR_process_vm_readv, sys_process_vm_readv, \ + compat_sys_process_vm_readv) +#define __NR_process_vm_writev 271 +__SC_COMP(__NR_process_vm_writev, sys_process_vm_writev, \ + compat_sys_process_vm_writev) #undef __NR_syscalls -#define __NR_syscalls 270 +#define __NR_syscalls 272 /* * All syscalls below here should go away really, diff --git a/include/linux/compat.h b/include/linux/compat.h index 154bf5683015..66ed067fb729 100644 --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -552,5 +552,14 @@ extern ssize_t compat_rw_copy_check_uvector(int type, extern void __user *compat_alloc_user_space(unsigned long len); +asmlinkage ssize_t compat_sys_process_vm_readv(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); +asmlinkage ssize_t compat_sys_process_vm_writev(compat_pid_t pid, + const struct compat_iovec __user *lvec, + unsigned long liovcnt, const struct compat_iovec __user *rvec, + unsigned long riovcnt, unsigned long flags); + #endif /* CONFIG_COMPAT */ #endif /* _LINUX_COMPAT_H */ -- cgit v1.2.3-70-g09d2 From 781a5e92bc3b666bc5752e3ce7e977978c2f64e9 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:56:03 -0500 Subject: drivers/net/ethernet/tile: use skb_frag_page() API This replaces raw access to the "page" field of the skb_frag_t. Signed-off-by: Chris Metcalf Acked-by: David S. Miller --- drivers/net/ethernet/tile/tilepro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 10826d8a2a2d..1c0f9facb9b1 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -1697,7 +1697,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, for (i = 0; i < sh->nr_frags; i++) { skb_frag_t *f = &sh->frags[i]; - unsigned long pfn = page_to_pfn(f->page); + unsigned long pfn = page_to_pfn(skb_frag_page(f)); /* FIXME: Compute "hash_for_home" properly. */ /* ISSUE: The hypervisor checks CHIP_HAS_REV1_DMA_PACKETS(). */ @@ -1706,7 +1706,7 @@ static unsigned int tile_net_tx_frags(lepp_frag_t *frags, /* FIXME: Hmmm. */ if (!hash_default) { void *va = pfn_to_kaddr(pfn) + f->page_offset; - BUG_ON(PageHighMem(f->page)); + BUG_ON(PageHighMem(skb_frag_page(f))); finv_buffer_remote(va, f->size, 0); } -- cgit v1.2.3-70-g09d2 From 0c90547b4a3fcee184db4d54ffc1a4fb17fd54d6 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Thu, 1 Dec 2011 12:58:19 -0500 Subject: arch/tile: use new generic {enable,disable}_percpu_irq() routines We provided very similar routines internally, but now we can hook into the generic framework by supplying our routines as function pointers in the irq_chip structure instead. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/irq.h | 10 ---------- arch/tile/kernel/irq.c | 16 ++++++++-------- drivers/net/ethernet/tile/tilepro.c | 4 ++-- 3 files changed, 10 insertions(+), 20 deletions(-) diff --git a/arch/tile/include/asm/irq.h b/arch/tile/include/asm/irq.h index 94e9a511de84..f80f8ceabc67 100644 --- a/arch/tile/include/asm/irq.h +++ b/arch/tile/include/asm/irq.h @@ -74,16 +74,6 @@ enum { */ void tile_irq_activate(unsigned int irq, int tile_irq_type); -/* - * For onboard, non-PCI (e.g. TILE_IRQ_PERCPU) devices, drivers know - * how to use enable/disable_percpu_irq() to manage interrupts on each - * core. We can't use the generic enable/disable_irq() because they - * use a single reference count per irq, rather than per cpu per irq. - */ -void enable_percpu_irq(unsigned int irq); -void disable_percpu_irq(unsigned int irq); - - void setup_irq_regs(void); #endif /* _ASM_TILE_IRQ_H */ diff --git a/arch/tile/kernel/irq.c b/arch/tile/kernel/irq.c index aa0134db2dd6..02e628065012 100644 --- a/arch/tile/kernel/irq.c +++ b/arch/tile/kernel/irq.c @@ -152,14 +152,13 @@ void tile_dev_intr(struct pt_regs *regs, int intnum) * Remove an irq from the disabled mask. If we're in an interrupt * context, defer enabling the HW interrupt until we leave. */ -void enable_percpu_irq(unsigned int irq) +static void tile_irq_chip_enable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) &= ~(1UL << irq); + get_cpu_var(irq_disable_mask) &= ~(1UL << d->irq); if (__get_cpu_var(irq_depth) == 0) - unmask_irqs(1UL << irq); + unmask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(enable_percpu_irq); /* * Add an irq to the disabled mask. We disable the HW interrupt @@ -167,13 +166,12 @@ EXPORT_SYMBOL(enable_percpu_irq); * in an interrupt context, the return path is careful to avoid * unmasking a newly disabled interrupt. */ -void disable_percpu_irq(unsigned int irq) +static void tile_irq_chip_disable(struct irq_data *d) { - get_cpu_var(irq_disable_mask) |= (1UL << irq); - mask_irqs(1UL << irq); + get_cpu_var(irq_disable_mask) |= (1UL << d->irq); + mask_irqs(1UL << d->irq); put_cpu_var(irq_disable_mask); } -EXPORT_SYMBOL(disable_percpu_irq); /* Mask an interrupt. */ static void tile_irq_chip_mask(struct irq_data *d) @@ -209,6 +207,8 @@ static void tile_irq_chip_eoi(struct irq_data *d) static struct irq_chip tile_irq_chip = { .name = "tile_irq_chip", + .irq_enable = tile_irq_chip_enable, + .irq_disable = tile_irq_chip_disable, .irq_ack = tile_irq_chip_ack, .irq_eoi = tile_irq_chip_eoi, .irq_mask = tile_irq_chip_mask, diff --git a/drivers/net/ethernet/tile/tilepro.c b/drivers/net/ethernet/tile/tilepro.c index 1c0f9facb9b1..1187a1169eb2 100644 --- a/drivers/net/ethernet/tile/tilepro.c +++ b/drivers/net/ethernet/tile/tilepro.c @@ -926,7 +926,7 @@ static int tile_net_poll(struct napi_struct *napi, int budget) goto done; /* Re-enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); /* HACK: Avoid the "rotting packet" problem (see above). */ if (qup->__packet_receive_read != @@ -1296,7 +1296,7 @@ static void tile_net_open_enable(void *dev_ptr) info->napi_enabled = true; /* Enable the ingress interrupt. */ - enable_percpu_irq(priv->intr_id); + enable_percpu_irq(priv->intr_id, 0); } -- cgit v1.2.3-70-g09d2 From f0a4cf31017ac8179a2fe295c1bd8e821d7674f4 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 12:43:40 +0000 Subject: sparc: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: David S. Miller --- arch/sparc/kernel/ds.c | 6 ++---- arch/sparc/kernel/prom_common.c | 4 +--- 2 files changed, 3 insertions(+), 7 deletions(-) diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c index 7429b47c3aca..381edcd5bc29 100644 --- a/arch/sparc/kernel/ds.c +++ b/arch/sparc/kernel/ds.c @@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev, dp->rcv_buf_len = 4096; - dp->ds_states = kzalloc(sizeof(ds_states_template), - GFP_KERNEL); + dp->ds_states = kmemdup(ds_states_template, + sizeof(ds_states_template), GFP_KERNEL); if (!dp->ds_states) goto out_free_rcv_buf; - memcpy(dp->ds_states, ds_states_template, - sizeof(ds_states_template)); dp->num_ds_states = ARRAY_SIZE(ds_states_template); for (i = 0; i < dp->num_ds_states; i++) diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c index 46614807a57f..741df916c124 100644 --- a/arch/sparc/kernel/prom_common.c +++ b/arch/sparc/kernel/prom_common.c @@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *new_val; int err; - new_val = kmalloc(len, GFP_KERNEL); + new_val = kmemdup(val, len, GFP_KERNEL); if (!new_val) return -ENOMEM; - memcpy(new_val, val, len); - err = -ENODEV; mutex_lock(&of_set_property_mutex); -- cgit v1.2.3-70-g09d2 From e410471029ba99e85af5e2a1e7e747c7b4de2bc3 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 21 Nov 2011 21:42:20 +0000 Subject: bbc_i2c: Remove unneeded err variable Signed-off-by: Axel Lin Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_i2c.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index 5f94d22c491e..a0d1399577cc 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -233,13 +233,9 @@ int bbc_i2c_write_buf(struct bbc_i2c_client *client, int ret = 0; while (len > 0) { - int err = bbc_i2c_writeb(client, *buf, off); - - if (err < 0) { - ret = err; + ret = bbc_i2c_writeb(client, *buf, off); + if (ret < 0) break; - } - len--; buf++; off++; @@ -253,11 +249,9 @@ int bbc_i2c_read_buf(struct bbc_i2c_client *client, int ret = 0; while (len > 0) { - int err = bbc_i2c_readb(client, buf, off); - if (err < 0) { - ret = err; + ret = bbc_i2c_readb(client, buf, off); + if (ret < 0) break; - } len--; buf++; off++; -- cgit v1.2.3-70-g09d2 From dbf2b92d54e73e4a2524b90d29bd498ecc4aa593 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sat, 26 Nov 2011 19:04:25 +0000 Subject: sbus: convert drivers/sbus/char/* to use module_platform_driver() This patch converts the drivers in drivers/sbus/char/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Signed-off-by: Axel Lin Signed-off-by: David S. Miller --- drivers/sbus/char/bbc_i2c.c | 13 +------------ drivers/sbus/char/display7seg.c | 13 +------------ drivers/sbus/char/envctrl.c | 12 +----------- drivers/sbus/char/flash.c | 12 +----------- drivers/sbus/char/uctrl.c | 12 +----------- 5 files changed, 5 insertions(+), 57 deletions(-) diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c index a0d1399577cc..542668292900 100644 --- a/drivers/sbus/char/bbc_i2c.c +++ b/drivers/sbus/char/bbc_i2c.c @@ -416,17 +416,6 @@ static struct platform_driver bbc_i2c_driver = { .remove = __devexit_p(bbc_i2c_remove), }; -static int __init bbc_i2c_init(void) -{ - return platform_driver_register(&bbc_i2c_driver); -} - -static void __exit bbc_i2c_exit(void) -{ - platform_driver_unregister(&bbc_i2c_driver); -} - -module_init(bbc_i2c_init); -module_exit(bbc_i2c_exit); +module_platform_driver(bbc_i2c_driver); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c index 965a1fccd66a..4b9939726c34 100644 --- a/drivers/sbus/char/display7seg.c +++ b/drivers/sbus/char/display7seg.c @@ -275,15 +275,4 @@ static struct platform_driver d7s_driver = { .remove = __devexit_p(d7s_remove), }; -static int __init d7s_init(void) -{ - return platform_driver_register(&d7s_driver); -} - -static void __exit d7s_exit(void) -{ - platform_driver_unregister(&d7s_driver); -} - -module_init(d7s_init); -module_exit(d7s_exit); +module_platform_driver(d7s_driver); diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c index be7b4e56154f..339fd6f65eda 100644 --- a/drivers/sbus/char/envctrl.c +++ b/drivers/sbus/char/envctrl.c @@ -1138,16 +1138,6 @@ static struct platform_driver envctrl_driver = { .remove = __devexit_p(envctrl_remove), }; -static int __init envctrl_init(void) -{ - return platform_driver_register(&envctrl_driver); -} - -static void __exit envctrl_exit(void) -{ - platform_driver_unregister(&envctrl_driver); -} +module_platform_driver(envctrl_driver); -module_init(envctrl_init); -module_exit(envctrl_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c index 73dd4e7afaaa..826157f38694 100644 --- a/drivers/sbus/char/flash.c +++ b/drivers/sbus/char/flash.c @@ -216,16 +216,6 @@ static struct platform_driver flash_driver = { .remove = __devexit_p(flash_remove), }; -static int __init flash_init(void) -{ - return platform_driver_register(&flash_driver); -} - -static void __exit flash_cleanup(void) -{ - platform_driver_unregister(&flash_driver); -} +module_platform_driver(flash_driver); -module_init(flash_init); -module_exit(flash_cleanup); MODULE_LICENSE("GPL"); diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c index ebce9639a26a..0b31658ccde5 100644 --- a/drivers/sbus/char/uctrl.c +++ b/drivers/sbus/char/uctrl.c @@ -435,16 +435,6 @@ static struct platform_driver uctrl_driver = { }; -static int __init uctrl_init(void) -{ - return platform_driver_register(&uctrl_driver); -} - -static void __exit uctrl_exit(void) -{ - platform_driver_unregister(&uctrl_driver); -} +module_platform_driver(uctrl_driver); -module_init(uctrl_init); -module_exit(uctrl_exit); MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From ef1497707c69f3805bbca97c5d10c2913b6d2fa1 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 19:35:20 +0800 Subject: ASoC: uda1380: Return proper error in uda1380_modinit failure path Return proper error for uda1380_modinit if i2c_add_driver() fails. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/codecs/uda1380.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/uda1380.c b/sound/soc/codecs/uda1380.c index c5ca8cfea60f..0441893e270e 100644 --- a/sound/soc/codecs/uda1380.c +++ b/sound/soc/codecs/uda1380.c @@ -863,13 +863,13 @@ static struct i2c_driver uda1380_i2c_driver = { static int __init uda1380_modinit(void) { - int ret; + int ret = 0; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) ret = i2c_add_driver(&uda1380_i2c_driver); if (ret != 0) pr_err("Failed to register UDA1380 I2C driver: %d\n", ret); #endif - return 0; + return ret; } module_init(uda1380_modinit); -- cgit v1.2.3-70-g09d2 From b971c370a4d265848d9df0793b2f7fcc5b16b378 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:30:18 +0800 Subject: ASoC: Fix dependency for SND_SOC_RAUMFELD and SND_PXA2XX_SOC_HX4700 SND_SOC_RAUMFELD selects SND_SOC_CS4270 which needs CONFIG_I2C, and also selects SND_SOC_AK4104 which needs SPI_MASTER. Thus make SND_SOC_RAUMFELD depend on I2C && SPI_MASTER. Add depend on SPI_MASTER to fix below build error if CONFIG_SPI_MASTER is not selected. LD .tmp_vmlinux1 sound/built-in.o: In function `ak4104_spi_write': last.c:(.text+0x290cc): undefined reference to `spi_sync' sound/built-in.o: In function `ak4104_probe': last.c:(.text+0x292a0): undefined reference to `spi_write_then_read' sound/built-in.o: In function `ak4104_spi_probe': last.c:(.text+0x29398): undefined reference to `spi_setup' sound/built-in.o: In function `ak4104_init': last.c:(.init.text+0x4ec): undefined reference to `spi_register_driver' make: *** [.tmp_vmlinux1] Error 1 Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/cs4270.o sound/soc/codecs/cs4270.c: In function 'cs4270_i2c_probe': sound/soc/codecs/cs4270.c:657: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/cs4270.c: In function 'cs4270_init': sound/soc/codecs/cs4270.c:730: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/cs4270.c: In function 'cs4270_exit': sound/soc/codecs/cs4270.c:736: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/cs4270.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 SND_PXA2XX_SOC_HX4700 selects SND_SOC_AK4641 which needs CONFIG_I2C. Thus make SND_PXA2XX_SOC_HX4700 depend on I2C. Add depend on I2C to fix below build error if CONFIG_I2C is not selected: CC sound/soc/codecs/ak4641.o sound/soc/codecs/ak4641.c: In function 'ak4641_modinit': sound/soc/codecs/ak4641.c:646: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/ak4641.c: In function 'ak4641_exit': sound/soc/codecs/ak4641.c:656: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/ak4641.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/pxa/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index ffd2242e305f..a0f7d3cfa470 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -151,6 +151,7 @@ config SND_SOC_ZYLONITE config SND_SOC_RAUMFELD tristate "SoC Audio support Raumfeld audio adapter" depends on SND_PXA2XX_SOC && (MACH_RAUMFELD_SPEAKER || MACH_RAUMFELD_CONNECTOR) + depends on I2C && SPI_MASTER select SND_PXA_SOC_SSP select SND_SOC_CS4270 select SND_SOC_AK4104 @@ -159,7 +160,7 @@ config SND_SOC_RAUMFELD config SND_PXA2XX_SOC_HX4700 tristate "SoC Audio support for HP iPAQ hx4700" - depends on SND_PXA2XX_SOC && MACH_H4700 + depends on SND_PXA2XX_SOC && MACH_H4700 && I2C select SND_PXA2XX_SOC_I2S select SND_SOC_AK4641 help -- cgit v1.2.3-70-g09d2 From 570a2429e964f8d63338b3450ba801a263b29b3a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Sun, 4 Dec 2011 16:11:16 +0800 Subject: ASoC: Make SND_SOC_MX27VIS_AIC32X4 depend on I2C SND_SOC_MX27VIS_AIC32X4 selects SND_SOC_TLV320AIC32X4, but SND_SOC_TLV320AIC32X4 needs CONFIG_I2C. So we need to make SND_SOC_MX27VIS_AIC32X4 depend on I2C. otherwise I got below build error if CONFIG_I2C is not selected. CC sound/soc/codecs/tlv320aic32x4.o sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_read': sound/soc/codecs/tlv320aic32x4.c:323: error: implicit declaration of function 'i2c_smbus_read_byte_data' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_probe': sound/soc/codecs/tlv320aic32x4.c:641: error: 'i2c_master_send' undeclared (first use in this function) sound/soc/codecs/tlv320aic32x4.c:641: error: (Each undeclared identifier is reported only once sound/soc/codecs/tlv320aic32x4.c:641: error: for each function it appears in.) sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_modinit': sound/soc/codecs/tlv320aic32x4.c:763: error: implicit declaration of function 'i2c_add_driver' sound/soc/codecs/tlv320aic32x4.c: In function 'aic32x4_exit': sound/soc/codecs/tlv320aic32x4.c:774: error: implicit declaration of function 'i2c_del_driver' make[3]: *** [sound/soc/codecs/tlv320aic32x4.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/imx/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/imx/Kconfig b/sound/soc/imx/Kconfig index b133bfcc5848..738391757f2c 100644 --- a/sound/soc/imx/Kconfig +++ b/sound/soc/imx/Kconfig @@ -28,7 +28,7 @@ config SND_MXC_SOC_WM1133_EV1 config SND_SOC_MX27VIS_AIC32X4 tristate "SoC audio support for Visstrim M10 boards" - depends on MACH_IMX27_VISSTRIM_M10 + depends on MACH_IMX27_VISSTRIM_M10 && I2C select SND_SOC_TLV320AIC32X4 select SND_MXC_SOC_MX2 help -- cgit v1.2.3-70-g09d2 From 8f9a0981aca6bd454ef2a4bdac510af0f6e55bd4 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:06 +0530 Subject: ARM: davinci: psc: fix incorrect mask There are 5 LSB bits defined in PDSTAT and the code currently uses a mask of 1 bit to check the status. Use a proper mask per the hardware specification. While at it, use a #define for the mask to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 1 + arch/arm/mach-davinci/psc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index fa59c097223d..8bf279a88b4b 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -244,6 +244,7 @@ #define PSC_STATE_ENABLE 3 #define MDSTAT_STATE_MASK 0x3f +#define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index 1fb6bdff38c1..a0e17707c981 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -80,7 +80,7 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); - if ((pdstat & 0x00000001) == 0) { + if ((pdstat & PDSTAT_STATE_MASK) == 0) { pdctl1 = __raw_readl(psc_base + PDCTL1); pdctl1 |= 0x1; __raw_writel(pdctl1, psc_base + PDCTL1); -- cgit v1.2.3-70-g09d2 From 78b838252fa986f66c7ec8047726ea500a08d98f Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 15 Nov 2011 01:42:07 +0530 Subject: ARM: davinci: psc: fix incorrect offsets Seperate PDSTAT and PDCTL registers are defined for domain 0 and domain 1 where as the code always reads the domain 0 PDSTAT register and domain 1 PDCTL register. Fix this issue. While at it, introduce usage of macros for register masks to improve readability. Reviewed-by: Sergei Shtylyov Signed-off-by: Murali Karicheri Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/include/mach/psc.h | 4 +++- arch/arm/mach-davinci/psc.c | 16 ++++++++-------- 2 files changed, 11 insertions(+), 9 deletions(-) diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 8bf279a88b4b..8bc3fc256171 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -233,7 +233,7 @@ #define PTCMD 0x120 #define PTSTAT 0x128 #define PDSTAT 0x200 -#define PDCTL1 0x304 +#define PDCTL 0x300 #define MDSTAT 0x800 #define MDCTL 0xA00 @@ -246,6 +246,8 @@ #define MDSTAT_STATE_MASK 0x3f #define PDSTAT_STATE_MASK 0x1f #define MDCTL_FORCE BIT(31) +#define PDCTL_NEXT BIT(1) +#define PDCTL_EPCGOOD BIT(8) #ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a0e17707c981..d7e210f4b55c 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -52,7 +52,7 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) void davinci_psc_config(unsigned int domain, unsigned int ctlr, unsigned int id, bool enable, u32 flags) { - u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; + u32 epcpr, ptcmd, ptstat, pdstat, pdctl, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; u32 next_state = PSC_STATE_ENABLE; @@ -79,11 +79,11 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); - pdstat = __raw_readl(psc_base + PDSTAT); + pdstat = __raw_readl(psc_base + PDSTAT + 4 * domain); if ((pdstat & PDSTAT_STATE_MASK) == 0) { - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x1; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_NEXT; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); @@ -92,9 +92,9 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, epcpr = __raw_readl(psc_base + EPCPR); } while ((((epcpr >> domain) & 1) == 0)); - pdctl1 = __raw_readl(psc_base + PDCTL1); - pdctl1 |= 0x100; - __raw_writel(pdctl1, psc_base + PDCTL1); + pdctl = __raw_readl(psc_base + PDCTL + 4 * domain); + pdctl |= PDCTL_EPCGOOD; + __raw_writel(pdctl, psc_base + PDCTL + 4 * domain); } else { ptcmd = 1 << domain; __raw_writel(ptcmd, psc_base + PTCMD); -- cgit v1.2.3-70-g09d2 From 9ab409e402cbfde11e2516be43921954db480f4d Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Tue, 15 Nov 2011 01:42:08 +0530 Subject: ARM: davinci: dm646x does not have a DSP domain Fix the incorrect classification of DSP clock into a seperate DSP domain on DM646x. Per the reference guide (http://www.ti.com/lit/ug/spruep9e/spruep9e.pdf) there is only one "AlwaysON" power domain on DM6467. Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm646x.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 0b68ed534f8e..af27c130595f 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -161,7 +161,6 @@ static struct clk dsp_clk = { .name = "dsp", .parent = &pll1_sysclk1, .lpsc = DM646X_LPSC_C64X_CPU, - .flags = PSC_DSP, .usecount = 1, /* REVISIT how to disable? */ }; -- cgit v1.2.3-70-g09d2 From 83713fc9373be2e943f82e9d36213708c6b0050e Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 14 Nov 2011 19:20:49 +0100 Subject: ARM: davinci: dm646x evm: wrong register used in setup_vpif_input_channel_mode The function setup_vpif_input_channel_mode() used the VSCLKDIS register instead of VIDCLKCTL. This meant that when in HD mode videoport channel 0 used a different clock from channel 1. Clearly a copy-and-paste error. Signed-off-by: Hans Verkuil Acked-by: Manjunath Hadli Signed-off-by: Sekhar Nori Cc: stable@kernel.org --- arch/arm/mach-davinci/board-dm646x-evm.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index e574d7f837a8..635bf7740157 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -564,7 +564,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) int val; u32 value; - if (!vpif_vsclkdis_reg || !cpld_client) + if (!vpif_vidclkctl_reg || !cpld_client) return -ENXIO; val = i2c_smbus_read_byte(cpld_client); @@ -572,7 +572,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) return val; spin_lock_irqsave(&vpif_reg_lock, flags); - value = __raw_readl(vpif_vsclkdis_reg); + value = __raw_readl(vpif_vidclkctl_reg); if (mux_mode) { val &= VPIF_INPUT_TWO_CHANNEL; value |= VIDCH1CLK; @@ -580,7 +580,7 @@ static int setup_vpif_input_channel_mode(int mux_mode) val |= VPIF_INPUT_ONE_CHANNEL; value &= ~VIDCH1CLK; } - __raw_writel(value, vpif_vsclkdis_reg); + __raw_writel(value, vpif_vidclkctl_reg); spin_unlock_irqrestore(&vpif_reg_lock, flags); err = i2c_smbus_write_byte(cpld_client, val); -- cgit v1.2.3-70-g09d2 From f1b21c525693b0159aed83b5871f2d0f077f208e Mon Sep 17 00:00:00 2001 From: "Manjunathappa, Prakash" Date: Thu, 10 Nov 2011 11:43:21 +0530 Subject: ARM: davinci: da850 evm: change audio edma event queue to EVENTQ_0 On OMAP-L138 platform, EDMA event queue 0 should be used for audio transfers so that they are not starved by video data moving on event queue 1. Commit 48519f0ae03bc7e86b3dc93e56f1334d53803770 (ASoC: davinci: let platform data define edma queue numbers) had a side-effect of changing this behavior by making the driver actually honor the platform data passed. Fix this now by passing event queue 0 as the queue to be used for audio transfers. Signed-off-by: Manjunathappa, Prakash Signed-off-by: Sekhar Nori Cc: # v2.6.36.x and above --- arch/arm/mach-davinci/board-da850-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1d7d24995226..6659a90dbcad 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -753,7 +753,7 @@ static struct snd_platform_data da850_evm_snd_data = { .num_serializer = ARRAY_SIZE(da850_iis_serializer_direction), .tdm_slots = 2, .serial_dir = da850_iis_serializer_direction, - .asp_chan_q = EVENTQ_1, + .asp_chan_q = EVENTQ_0, .version = MCASP_VERSION_2, .txnumevt = 1, .rxnumevt = 1, -- cgit v1.2.3-70-g09d2 From 45fc4cce939adc883fba5e02f1f3e0e9ff020c30 Mon Sep 17 00:00:00 2001 From: "Shankarmurthy,Akshay" Date: Wed, 9 Nov 2011 17:55:20 +0530 Subject: ARM: davinci: dm365 evm: align nand partition table to u-boot Current partition information maintained in kernel does not match with u-boot, this leads to corruption of u-boot env when we update uImage from kernel. Patch fixes it to match with u-boot partition information. Signed-off-by: Shankarmurthy,Akshay Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/board-dm365-evm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 1918ae711428..46e1f4173b97 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -107,7 +107,7 @@ static struct mtd_partition davinci_nand_partitions[] = { /* UBL (a few copies) plus U-Boot */ .name = "bootloader", .offset = 0, - .size = 28 * NAND_BLOCK_SIZE, + .size = 30 * NAND_BLOCK_SIZE, .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { /* U-Boot environment */ -- cgit v1.2.3-70-g09d2 From df16c86a56595d1c28e58532ec25dd612c39c6c7 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 23 Nov 2011 15:57:06 +0100 Subject: mtd: gpmi: add missing include 'module.h' Fixes: drivers/mtd/nand/gpmi-nand/gpmi-nand.c: In function 'gpmi_nfc_init': drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: error: 'THIS_MODULE' undeclared (first use in this function) drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1475:16: note: each undeclared identifier is reported only once for each function it appears in drivers/mtd/nand/gpmi-nand/gpmi-nand.c: At top level: drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:15: error: expected declaration specifiers or '...' before string constant drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: data definition has no type or storage class drivers/mtd/nand/gpmi-nand/gpmi-nand.c:1617:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' and some more... Signed-off-by: Wolfram Sang Acked-by: Huang Shijie Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 071b63420f0e..493ec2fcf97f 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -21,9 +21,9 @@ #include #include #include +#include #include #include - #include "gpmi-nand.h" /* add our owner bbt descriptor */ -- cgit v1.2.3-70-g09d2 From 38f6ae1e1b0d5e8b0a95f88c1eee2c5e8b001631 Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Fri, 2 Dec 2011 09:38:33 +1100 Subject: perf stat: Failure with "Operation not supported" perf stat is failing on PowerPC: Error: open_counter returned with 95 (Operation not supported). /bin/dmesg may provide additional information. Fatal: Not all events could be opened. commit 370faf1dd046 (perf stat: Fail softly on unsupported events) added a check for failure returning ENOENT, but the POWER backend returns EOPNOTSUPP. It looks like alpha, blackfin and mips do the same. With the patch applied, things work as expected: Performance counter stats for '/bin/true': 0.362176 task-clock # 0.623 CPUs utilized 0 context-switches # 0.000 M/sec 0 CPU-migrations # 0.000 M/sec 28 page-faults # 0.077 M/sec 1,677,020 cycles # 4.630 GHz stalled-cycles-frontend stalled-cycles-backend 431,220 instructions # 0.26 insns per cycle 101,889 branches # 281.325 M/sec 4,145 branch-misses # 4.07% of all branches 0.000581361 seconds time elapsed Cc: # 3.0+ Cc: David Ahern Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/20111202093833.5fef7226@kryten Signed-off-by: Anton Blanchard Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-stat.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c index 7d98676808d8..955930e0a5c3 100644 --- a/tools/perf/builtin-stat.c +++ b/tools/perf/builtin-stat.c @@ -463,7 +463,8 @@ static int run_perf_stat(int argc __used, const char **argv) list_for_each_entry(counter, &evsel_list->entries, node) { if (create_perf_stat_counter(counter, first) < 0) { - if (errno == EINVAL || errno == ENOSYS || errno == ENOENT) { + if (errno == EINVAL || errno == ENOSYS || + errno == ENOENT || errno == EOPNOTSUPP) { if (verbose) ui__warning("%s event is not supported by the kernel.\n", event_name(counter)); -- cgit v1.2.3-70-g09d2 From 6560ee07dc946e94f7cc2cd8e3b5a5f5ee7340c1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 1 Dec 2011 21:13:02 +0100 Subject: ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram Otherwise timing is inaccurate, resulting in devices which depend on it, like omap-keypad, broken. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: removed comment referencing a development branch] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap1/clock_data.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index 86b2dec11788..9ff90a744a21 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -16,6 +16,8 @@ #include #include +#include +#include #include #include /* for machine_is_* */ @@ -927,7 +929,9 @@ int __init omap1_clk_init(void) void __init omap1_clk_late_init(void) { - if (ck_dpll1.rate >= OMAP1_DPLL1_SANE_VALUE) + unsigned long rate = ck_dpll1.rate; + + if (rate >= OMAP1_DPLL1_SANE_VALUE) return; /* System booting at unusable rate, force reprogramming of DPLL1 */ @@ -942,4 +946,5 @@ void __init omap1_clk_late_init(void) } propagate_rate(&ck_dpll1); omap1_show_rates(); + loops_per_jiffy = cpufreq_scale(loops_per_jiffy, rate, ck_dpll1.rate); } -- cgit v1.2.3-70-g09d2 From bbef98ab0f019f1b0c25c1acdf1683c68933d41b Mon Sep 17 00:00:00 2001 From: Ram Pai Date: Sun, 6 Nov 2011 10:33:10 +0800 Subject: PCI: defer enablement of SRIOV BARS All the PCI BARs of a device are enabled when the device is enabled using pci_enable_device(). This unnecessarily enables SRIOV BARs of the device. On some platforms, which do not support SRIOV as yet, the pci_enable_device() fails to enable the device if its SRIOV BARs are not allocated resources correctly. The following patch fixes the above problem. The SRIOV BARs are now enabled when IOV capability of the device is enabled in sriov_enable(). NOTE: Note, there is subtle change in the pci_enable_device() API. Any driver that depends on SRIOV BARS to be enabled in pci_enable_device() can fail. The patch has been touch tested on power and x86 platform. Tested-by: Michael Wang Signed-off-by: Ram Pai Signed-off-by: Jesse Barnes --- drivers/pci/iov.c | 7 +++++++ drivers/pci/pci.c | 2 +- 2 files changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/pci/iov.c b/drivers/pci/iov.c index b82c155d7b37..1969a3ee3058 100644 --- a/drivers/pci/iov.c +++ b/drivers/pci/iov.c @@ -283,6 +283,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) struct resource *res; struct pci_dev *pdev; struct pci_sriov *iov = dev->sriov; + int bars = 0; if (!nr_virtfn) return 0; @@ -307,6 +308,7 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) nres = 0; for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) { + bars |= (1 << (i + PCI_IOV_RESOURCES)); res = dev->resource + PCI_IOV_RESOURCES + i; if (res->parent) nres++; @@ -324,6 +326,11 @@ static int sriov_enable(struct pci_dev *dev, int nr_virtfn) return -ENOMEM; } + if (pci_enable_resources(dev, bars)) { + dev_err(&dev->dev, "SR-IOV: IOV BARS not allocated\n"); + return -ENOMEM; + } + if (iov->link != dev->devfn) { pdev = pci_get_slot(dev->bus, iov->link); if (!pdev) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6f45a73c6e9f..4788413f43d7 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1126,7 +1126,7 @@ static int __pci_enable_device_flags(struct pci_dev *dev, if (atomic_add_return(1, &dev->enable_cnt) > 1) return 0; /* already enabled */ - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) + for (i = 0; i < PCI_ROM_RESOURCE; i++) if (dev->resource[i].flags & flags) bars |= (1 << i); -- cgit v1.2.3-70-g09d2 From 8c4519456713628cbb457c77bf06684aace67f69 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 29 Nov 2011 19:20:23 +0000 Subject: PCI: fix ats compile failure I get this compile failure on parisc: drivers/pci/ats.c: In function 'ats_alloc_one': drivers/pci/ats.c:29: error: implicit declaration of function 'kzalloc' drivers/pci/ats.c:29: warning: assignment makes pointer from integer without a cast drivers/pci/ats.c: In function 'ats_free_one': drivers/pci/ats.c:45: error: implicit declaration of function 'kfree' Because ats.c is missing linux/slab.h as an include. This patch fixes it Signed-off-by: James Bottomley Signed-off-by: Jesse Barnes --- drivers/pci/ats.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c index 7ec56fb0bd78..b0dd08e6a9da 100644 --- a/drivers/pci/ats.c +++ b/drivers/pci/ats.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "pci.h" -- cgit v1.2.3-70-g09d2 From 145294c359a690b35c62d27dcff28fe892d02aca Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 18:27:25 +0000 Subject: ASoC: Remove references to corgi and spitz from machine driver document They're not currently actively worked on, the hardware being rather obsolete by now. Signed-off-by: Mark Brown --- Documentation/sound/alsa/soc/machine.txt | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt index 3e2ec9cbf397..d50c14df3411 100644 --- a/Documentation/sound/alsa/soc/machine.txt +++ b/Documentation/sound/alsa/soc/machine.txt @@ -50,8 +50,7 @@ Machine DAI Configuration The machine DAI configuration glues all the codec and CPU DAIs together. It can also be used to set up the DAI system clock and for any machine related DAI initialisation e.g. the machine audio map can be connected to the codec audio -map, unconnected codec pins can be set as such. Please see corgi.c, spitz.c -for examples. +map, unconnected codec pins can be set as such. struct snd_soc_dai_link is used to set up each DAI in your machine. e.g. @@ -83,8 +82,7 @@ Machine Power Map The machine driver can optionally extend the codec power map and to become an audio power map of the audio subsystem. This allows for automatic power up/down of speaker/HP amplifiers, etc. Codec pins can be connected to the machines jack -sockets in the machine init function. See soc/pxa/spitz.c and dapm.txt for -details. +sockets in the machine init function. Machine Controls -- cgit v1.2.3-70-g09d2 From 03e98c9eb916f3f0868c1dc344dde2a60287ff72 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 02:36:16 -0700 Subject: target: Address legacy PYX_TRANSPORT_* return code breakage This patch removes legacy usage of PYX_TRANSPORT_* return codes in a number of locations and addresses cases where transport_generic_request_failure() was returning the incorrect sense upon CHECK_CONDITION status after the v3.1 converson to use errno return codes. This includes the conversion of transport_generic_request_failure() to process cmd->scsi_sense_reason and handle extra TCM_RESERVATION_CONFLICT before calling transport_send_check_condition_and_sense() to queue up response status. It also drops PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES legacy usgae, and returns TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE w/ a response for these cases. transport_generic_allocate_tasks(), transport_generic_new_cmd(), backend SCF_SCSI_DATA_SG_IO_CDB ->do_task(), and emulated ->execute_task() have all been updated to set se_cmd->scsi_sense_reason and return errno codes universally upon failure. This includes cmd->scsi_sense_reason assignment in target_core_alua.c, target_core_pr.c and target_core_cdb.c emulation code. Finally it updates fabric modules to remove the legacy usage, and for TFO->new_cmd_map() callers forwards return values outside of fabric code. iscsi-target has also been updated to remove a handful of special cases related to the cleanup and signaling QUEUE_FULL handling w/ ft_write_pending() (v2: Drop extra SCF_SCSI_CDB_EXCEPTION check during failure from transport_generic_new_cmd, and re-add missing task->task_error_status assignment in transport_complete_task) Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 9 +- drivers/target/iscsi/iscsi_target_erl1.c | 3 +- drivers/target/loopback/tcm_loop.c | 24 +--- drivers/target/target_core_alua.c | 25 ++-- drivers/target/target_core_cdb.c | 18 ++- drivers/target/target_core_device.c | 2 +- drivers/target/target_core_file.c | 6 +- drivers/target/target_core_iblock.c | 14 +- drivers/target/target_core_pr.c | 240 ++++++++++++++++++++----------- drivers/target/target_core_pscsi.c | 28 ++-- drivers/target/target_core_rd.c | 3 +- drivers/target/target_core_tmr.c | 4 - drivers/target/target_core_transport.c | 178 +++++++---------------- drivers/target/tcm_fc/tfc_cmd.c | 2 +- include/target/target_core_base.h | 4 +- include/target/target_core_transport.h | 24 ---- 16 files changed, 281 insertions(+), 303 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 0fd96c10271d..4d81e1007c92 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1017,11 +1017,6 @@ done: " non-existent or non-exported iSCSI LUN:" " 0x%016Lx\n", get_unaligned_le64(&hdr->lun)); } - if (ret == PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES) - return iscsit_add_reject_from_cmd( - ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); - send_check_condition = 1; goto attach_cmd; } @@ -1123,7 +1118,7 @@ attach_cmd: * the backend memory allocation. */ ret = transport_generic_new_cmd(&cmd->se_cmd); - if ((ret < 0) || (cmd->se_cmd.se_cmd_flags & SCF_SE_CMD_FAILED)) { + if (ret < 0) { immed_ret = IMMEDIATE_DATA_NORMAL_OPERATION; dump_immediate_data = 1; goto after_immediate_data; @@ -1341,7 +1336,7 @@ static int iscsit_handle_data_out(struct iscsi_conn *conn, unsigned char *buf) spin_lock_irqsave(&se_cmd->t_state_lock, flags); if (!(se_cmd->se_cmd_flags & SCF_SUPPORTED_SAM_OPCODE) || - (se_cmd->se_cmd_flags & SCF_SE_CMD_FAILED)) + (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION)) dump_unsolicited_data = 1; spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index c4c68da3e500..101b1beb3bca 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -938,8 +938,7 @@ int iscsit_execute_cmd(struct iscsi_cmd *cmd, int ooo) * handle the SCF_SCSI_RESERVATION_CONFLICT case here as well. */ if (se_cmd->se_cmd_flags & SCF_SCSI_CDB_EXCEPTION) { - if (se_cmd->se_cmd_flags & - SCF_SCSI_RESERVATION_CONFLICT) { + if (se_cmd->scsi_sense_reason == TCM_RESERVATION_CONFLICT) { cmd->i_state = ISTATE_SEND_STATUS; spin_unlock_bh(&cmd->istate_lock); iscsit_add_cmd_to_response_queue(cmd, cmd->conn, diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 3df1c9b8ae6b..cbf5e4513741 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -148,22 +148,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * Allocate the necessary tasks to complete the received CDB+data */ ret = transport_generic_allocate_tasks(se_cmd, sc->cmnd); - if (ret == -ENOMEM) { - /* Out of Resources */ - return PYX_TRANSPORT_LU_COMM_FAILURE; - } else if (ret == -EINVAL) { - /* - * Handle case for SAM_STAT_RESERVATION_CONFLICT - */ - if (se_cmd->se_cmd_flags & SCF_SCSI_RESERVATION_CONFLICT) - return PYX_TRANSPORT_RESERVATION_CONFLICT; - /* - * Otherwise, return SAM_STAT_CHECK_CONDITION and return - * sense data. - */ - return PYX_TRANSPORT_USE_SENSE_REASON; - } - + if (ret != 0) + return ret; /* * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. @@ -194,12 +180,8 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) } /* Tell the core about our preallocated memory */ - ret = transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), + return transport_generic_map_mem_to_cmd(se_cmd, scsi_sglist(sc), scsi_sg_count(sc), sgl_bidi, sgl_bidi_count); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; - - return 0; } /* diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 88f2ad43ec8b..cd61331c1482 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -191,9 +191,10 @@ int target_emulate_set_target_port_groups(struct se_task *task) int alua_access_state, primary = 0, rc; u16 tg_pt_id, rtpi; - if (!l_port) - return PYX_TRANSPORT_LU_COMM_FAILURE; - + if (!l_port) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } buf = transport_kmap_first_data_page(cmd); /* @@ -203,7 +204,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) l_tg_pt_gp_mem = l_port->sep_alua_tg_pt_gp_mem; if (!l_tg_pt_gp_mem) { pr_err("Unable to access l_port->sep_alua_tg_pt_gp_mem\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } spin_lock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); @@ -211,7 +213,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!l_tg_pt_gp) { spin_unlock(&l_tg_pt_gp_mem->tg_pt_gp_mem_lock); pr_err("Unable to access *l_tg_pt_gp_mem->tg_pt_gp\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } rc = (l_tg_pt_gp->tg_pt_gp_alua_access_type & TPGS_EXPLICT_ALUA); @@ -220,7 +223,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) if (!rc) { pr_debug("Unable to process SET_TARGET_PORT_GROUPS" " while TPGS_EXPLICT_ALUA is disabled\n"); - rc = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + rc = -EINVAL; goto out; } @@ -245,7 +249,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * REQUEST, and the additional sense code set to INVALID * FIELD IN PARAMETER LIST. */ - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } rc = -1; @@ -298,7 +303,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * throw an exception with ASCQ: INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } else { @@ -335,7 +341,8 @@ int target_emulate_set_target_port_groups(struct se_task *task) * INVALID_PARAMETER_LIST */ if (rc != 0) { - rc = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + rc = -EINVAL; goto out; } } diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 683ba02b8247..8013a5a7bf64 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -703,6 +703,7 @@ int target_emulate_inquiry(struct se_task *task) if (cmd->data_length < 4) { pr_err("SCSI Inquiry payload length: %u" " too small for EVPD=1\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } @@ -719,6 +720,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; ret = -EINVAL; out_unmap: @@ -969,7 +971,8 @@ int target_emulate_modesense(struct se_task *task) default: pr_err("MODE SENSE: unimplemented page/subpage: 0x%02x/0x%02x\n", cdb[2] & 0x3f, cdb[3]); - return PYX_TRANSPORT_UNKNOWN_MODE_PAGE; + cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; + return -EINVAL; } offset += length; @@ -1027,7 +1030,8 @@ int target_emulate_request_sense(struct se_task *task) if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" " supported\n"); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -ENOSYS; } buf = transport_kmap_first_data_page(cmd); @@ -1100,7 +1104,8 @@ int target_emulate_unmap(struct se_task *task) if (!dev->transport->do_discard) { pr_err("UNMAP emulation not supported for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } /* First UNMAP block descriptor starts at 8 byte offset */ @@ -1157,7 +1162,8 @@ int target_emulate_write_same(struct se_task *task) if (!dev->transport->do_discard) { pr_err("WRITE_SAME emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } if (cmd->t_task_cdb[0] == WRITE_SAME) @@ -1193,11 +1199,13 @@ int target_emulate_write_same(struct se_task *task) int target_emulate_synchronize_cache(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; + struct se_cmd *cmd = task->task_se_cmd; if (!dev->transport->do_sync_cache) { pr_err("SYNCHRONIZE_CACHE emulation not supported" " for: %s\n", dev->transport->name); - return PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + return -ENOSYS; } dev->transport->do_sync_cache(task); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index ba5edec2c5f8..07953284ea6f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -708,7 +708,7 @@ done: se_task->task_scsi_status = GOOD; transport_complete_task(se_task, 1); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* se_release_device_for_hba(): diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 67cd6fe05bfa..cdd47e8c7366 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -449,13 +449,15 @@ static int fd_do_task(struct se_task *task) } - if (ret < 0) + if (ret < 0) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return ret; + } if (ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); } - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* fd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 7698efe29262..c670b8c2c994 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -554,12 +554,15 @@ static int iblock_do_task(struct se_task *task) else { pr_err("Unsupported SCSI -> BLOCK LBA conversion:" " %u\n", dev->se_sub_dev->se_dev_attrib.block_size); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOSYS; } bio = iblock_get_bio(task, block_lba, sg_num); - if (!bio) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + if (!bio) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; + } bio_list_init(&list); bio_list_add(&list, bio); @@ -588,12 +591,13 @@ static int iblock_do_task(struct se_task *task) submit_bio(rw, bio); blk_finish_plug(&plug); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while ((bio = bio_list_pop(&list))) bio_put(bio); - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static u32 iblock_get_device_rev(struct se_device *dev) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 5a4ebfc3a54f..95dee7074aeb 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -191,7 +191,7 @@ static int target_check_scsi2_reservation_conflict(struct se_cmd *cmd, int *ret) pr_err("Received legacy SPC-2 RESERVE/RELEASE" " while active SPC-3 registrations exist," " returning RESERVATION_CONFLICT\n"); - *ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; return true; } @@ -252,7 +252,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) (cmd->t_task_cdb[1] & 0x02)) { pr_err("LongIO and Obselete Bits set, returning" " ILLEGAL_REQUEST\n"); - ret = PYX_TRANSPORT_ILLEGAL_REQUEST; + cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + ret = -EINVAL; goto out; } /* @@ -277,7 +278,8 @@ int target_scsi2_reservation_reserve(struct se_task *task) " from %s \n", cmd->se_lun->unpacked_lun, cmd->se_deve->mapped_lun, sess->se_node_acl->initiatorname); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out_unlock; } @@ -1510,7 +1512,8 @@ static int core_scsi3_decode_spec_i_port( tidh_new = kzalloc(sizeof(struct pr_transport_id_holder), GFP_KERNEL); if (!tidh_new) { pr_err("Unable to allocate tidh_new\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } INIT_LIST_HEAD(&tidh_new->dest_list); tidh_new->dest_tpg = tpg; @@ -1522,7 +1525,8 @@ static int core_scsi3_decode_spec_i_port( sa_res_key, all_tg_pt, aptpl); if (!local_pr_reg) { kfree(tidh_new); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } tidh_new->dest_pr_reg = local_pr_reg; /* @@ -1548,7 +1552,8 @@ static int core_scsi3_decode_spec_i_port( pr_err("SPC-3 PR: Illegal tpdl: %u + 28 byte header" " does not equal CDB data_length: %u\n", tpdl, cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1598,7 +1603,9 @@ static int core_scsi3_decode_spec_i_port( " for tmp_tpg\n"); atomic_dec(&tmp_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } /* @@ -1628,7 +1635,9 @@ static int core_scsi3_decode_spec_i_port( atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_tpg_undepend_item(tmp_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } @@ -1646,7 +1655,8 @@ static int core_scsi3_decode_spec_i_port( if (!dest_tpg) { pr_err("SPC-3 PR SPEC_I_PT: Unable to locate" " dest_tpg\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -1660,7 +1670,8 @@ static int core_scsi3_decode_spec_i_port( " %u for Transport ID: %s\n", tid_len, ptr); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -1678,7 +1689,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -1690,7 +1702,9 @@ static int core_scsi3_decode_spec_i_port( smp_mb__after_atomic_dec(); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -1727,7 +1741,9 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_lunacl_undepend_item(dest_se_deve); core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -ENOMEM; goto out; } INIT_LIST_HEAD(&tidh_new->dest_list); @@ -1759,7 +1775,8 @@ static int core_scsi3_decode_spec_i_port( core_scsi3_nodeacl_undepend_item(dest_node_acl); core_scsi3_tpg_undepend_item(dest_tpg); kfree(tidh_new); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } tidh_new->dest_pr_reg = dest_pr_reg; @@ -2098,7 +2115,8 @@ static int core_scsi3_emulate_pro_register( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2117,13 +2135,14 @@ static int core_scsi3_emulate_pro_register( if (res_key) { pr_warn("SPC-3 PR: Reservation Key non-zero" " for SA REGISTER, returning CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * Do nothing but return GOOD status. */ if (!sa_res_key) - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; if (!spec_i_pt) { /* @@ -2138,7 +2157,8 @@ static int core_scsi3_emulate_pro_register( if (ret != 0) { pr_err("Unable to allocate" " struct t10_pr_registration\n"); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } } else { /* @@ -2197,14 +2217,16 @@ static int core_scsi3_emulate_pro_register( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } } if (spec_i_pt) { pr_err("SPC-3 PR UNREGISTER: SPEC_I_PT" " set while sa_res_key=0\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * An existing ALL_TG_PT=1 registration being released @@ -2215,7 +2237,8 @@ static int core_scsi3_emulate_pro_register( " registration exists, but ALL_TG_PT=1 bit not" " present in received PROUT\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } /* * Allocate APTPL metadata buffer used for UNREGISTER ops @@ -2227,7 +2250,9 @@ static int core_scsi3_emulate_pro_register( pr_err("Unable to allocate" " pr_aptpl_buf\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } } /* @@ -2241,7 +2266,8 @@ static int core_scsi3_emulate_pro_register( if (pr_holder < 0) { kfree(pr_aptpl_buf); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } spin_lock(&pr_tmpl->registration_lock); @@ -2405,7 +2431,8 @@ static int core_scsi3_pro_reserve( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } se_tpg = se_sess->se_tpg; se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; @@ -2417,7 +2444,8 @@ static int core_scsi3_pro_reserve( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RESERVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2433,7 +2461,8 @@ static int core_scsi3_pro_reserve( " does not match existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2448,7 +2477,8 @@ static int core_scsi3_pro_reserve( if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * See if we have an existing PR reservation holder pointer at @@ -2480,7 +2510,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2503,7 +2534,8 @@ static int core_scsi3_pro_reserve( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.9: Reserving: @@ -2517,7 +2549,7 @@ static int core_scsi3_pro_reserve( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * Otherwise, our *pr_reg becomes the PR reservation holder for said @@ -2574,7 +2606,8 @@ static int core_scsi3_emulate_pro_reserve( default: pr_err("SPC-3 PR: Unknown Service Action RESERVE Type:" " 0x%02x\n", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -2630,7 +2663,8 @@ static int core_scsi3_emulate_pro_release( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * Locate the existing *pr_reg via struct se_node_acl pointers @@ -2639,7 +2673,8 @@ static int core_scsi3_emulate_pro_release( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for RELEASE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2661,7 +2696,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } if ((pr_res_holder->pr_res_type == PR_TYPE_WRITE_EXCLUSIVE_ALLREG) || (pr_res_holder->pr_res_type == PR_TYPE_EXCLUSIVE_ACCESS_ALLREG)) @@ -2675,7 +2710,7 @@ static int core_scsi3_emulate_pro_release( */ spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* * From spc4r17 Section 5.7.11.2 Releasing: @@ -2697,7 +2732,8 @@ static int core_scsi3_emulate_pro_release( " 0x%016Lx\n", res_key, pr_reg->pr_res_key); spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * From spc4r17 Section 5.7.11.2 Releasing and above: @@ -2719,7 +2755,8 @@ static int core_scsi3_emulate_pro_release( spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * In response to a persistent reservation release request from the @@ -2802,7 +2839,8 @@ static int core_scsi3_emulate_pro_clear( if (!pr_reg_n) { pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for CLEAR\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * From spc4r17 section 5.7.11.6, Clearing: @@ -2821,7 +2859,8 @@ static int core_scsi3_emulate_pro_clear( " existing SA REGISTER res_key:" " 0x%016Lx\n", res_key, pr_reg_n->pr_res_key); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * a) Release the persistent reservation, if any; @@ -2979,8 +3018,10 @@ static int core_scsi3_pro_preempt( int all_reg = 0, calling_it_nexus = 0, released_regs = 0; int prh_type = 0, prh_scope = 0, ret; - if (!se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } se_deve = &se_sess->se_node_acl->device_list[cmd->orig_fe_lun]; pr_reg_n = core_scsi3_locate_pr_reg(cmd->se_dev, se_sess->se_node_acl, @@ -2989,16 +3030,19 @@ static int core_scsi3_pro_preempt( pr_err("SPC-3 PR: Unable to locate" " PR_REGISTERED *pr_reg for PREEMPT%s\n", (abort) ? "_AND_ABORT" : ""); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (pr_reg_n->pr_res_key != res_key) { core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } if (scope != PR_SCOPE_LU_SCOPE) { pr_err("SPC-3 PR: Illegal SCOPE: 0x%02x\n", scope); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } INIT_LIST_HEAD(&preempt_and_abort_list); @@ -3012,7 +3056,8 @@ static int core_scsi3_pro_preempt( if (!all_reg && !sa_res_key) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* * From spc4r17, section 5.7.11.4.4 Removing Registrations: @@ -3106,7 +3151,8 @@ static int core_scsi3_pro_preempt( if (!released_regs) { spin_unlock(&dev->dev_reservation_lock); core_scsi3_put_pr_reg(pr_reg_n); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * For an existing all registrants type reservation @@ -3297,7 +3343,8 @@ static int core_scsi3_emulate_pro_preempt( default: pr_err("SPC-3 PR: Unknown Service Action PREEMPT%s" " Type: 0x%02x\n", (abort) ? "_AND_ABORT" : "", type); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } return ret; @@ -3331,7 +3378,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!se_sess || !se_lun) { pr_err("SPC-3 PR: se_sess || struct se_lun is NULL!\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } memset(dest_iport, 0, 64); memset(i_buf, 0, PR_REG_ISID_ID_LEN); @@ -3349,7 +3397,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!pr_reg) { pr_err("SPC-3 PR: Unable to locate PR_REGISTERED" " *pr_reg for REGISTER_AND_MOVE\n"); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } /* * The provided reservation key much match the existing reservation key @@ -3360,7 +3409,8 @@ static int core_scsi3_emulate_pro_register_and_move( " res_key: 0x%016Lx does not match existing SA REGISTER" " res_key: 0x%016Lx\n", res_key, pr_reg->pr_res_key); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } /* * The service active reservation key needs to be non zero @@ -3369,7 +3419,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received zero" " sa_res_key\n"); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } /* @@ -3392,7 +3443,8 @@ static int core_scsi3_emulate_pro_register_and_move( " does not equal CDB data_length: %u\n", tid_len, cmd->data_length); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3417,7 +3469,8 @@ static int core_scsi3_emulate_pro_register_and_move( atomic_dec(&dest_se_tpg->tpg_pr_ref_count); smp_mb__after_atomic_dec(); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; } spin_lock(&dev->se_port_lock); @@ -3430,7 +3483,8 @@ static int core_scsi3_emulate_pro_register_and_move( " fabric ops from Relative Target Port Identifier:" " %hu\n", rtpi); core_scsi3_put_pr_reg(pr_reg); - return PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3445,14 +3499,16 @@ static int core_scsi3_emulate_pro_register_and_move( " from fabric: %s\n", proto_ident, dest_tf_ops->get_fabric_proto_ident(dest_se_tpg), dest_tf_ops->get_fabric_name()); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (dest_tf_ops->tpg_parse_pr_out_transport_id == NULL) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Fabric does not" " containg a valid tpg_parse_pr_out_transport_id" " function pointer\n"); - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } initiator_str = dest_tf_ops->tpg_parse_pr_out_transport_id(dest_se_tpg, @@ -3460,7 +3516,8 @@ static int core_scsi3_emulate_pro_register_and_move( if (!initiator_str) { pr_err("SPC-3 PR REGISTER_AND_MOVE: Unable to locate" " initiator_str from Transport ID\n"); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3489,7 +3546,8 @@ static int core_scsi3_emulate_pro_register_and_move( pr_err("SPC-3 PR REGISTER_AND_MOVE: TransportID: %s" " matches: %s on received I_T Nexus\n", initiator_str, pr_reg_nacl->initiatorname); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } if (!strcmp(iport_ptr, pr_reg->pr_reg_isid)) { @@ -3497,7 +3555,8 @@ static int core_scsi3_emulate_pro_register_and_move( " matches: %s %s on received I_T Nexus\n", initiator_str, iport_ptr, pr_reg_nacl->initiatorname, pr_reg->pr_reg_isid); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } after_iport_check: @@ -3517,7 +3576,8 @@ after_iport_check: pr_err("Unable to locate %s dest_node_acl for" " TransportID%s\n", dest_tf_ops->get_fabric_name(), initiator_str); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } ret = core_scsi3_nodeacl_depend_item(dest_node_acl); @@ -3527,7 +3587,8 @@ after_iport_check: atomic_dec(&dest_node_acl->acl_pr_ref_count); smp_mb__after_atomic_dec(); dest_node_acl = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } #if 0 @@ -3543,7 +3604,8 @@ after_iport_check: if (!dest_se_deve) { pr_err("Unable to locate %s dest_se_deve from RTPI:" " %hu\n", dest_tf_ops->get_fabric_name(), rtpi); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3553,7 +3615,8 @@ after_iport_check: atomic_dec(&dest_se_deve->pr_ref_count); smp_mb__after_atomic_dec(); dest_se_deve = NULL; - ret = PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + ret = -EINVAL; goto out; } #if 0 @@ -3572,7 +3635,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: No reservation" " currently held\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; goto out; } /* @@ -3585,7 +3649,8 @@ after_iport_check: pr_warn("SPC-3 PR REGISTER_AND_MOVE: Calling I_T" " Nexus is not reservation holder\n"); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } /* @@ -3603,7 +3668,8 @@ after_iport_check: " reservation for type: %s\n", core_scsi3_pr_dump_type(pr_res_holder->pr_res_type)); spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = -EINVAL; goto out; } pr_res_nacl = pr_res_holder->pr_reg_nacl; @@ -3640,7 +3706,8 @@ after_iport_check: sa_res_key, 0, aptpl, 2, 1); if (ret != 0) { spin_unlock(&dev->dev_reservation_lock); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } dest_pr_reg = __core_scsi3_locate_pr_reg(dev, dest_node_acl, @@ -3771,7 +3838,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - ret = PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + ret = EINVAL; goto out; } @@ -3779,13 +3847,16 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * FIXME: A NULL struct se_session pointer means an this is not coming from * a $FABRIC_MOD's nexus, but from internal passthrough ops. */ - if (!cmd->se_sess) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (!cmd->se_sess) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -EINVAL; + } if (cmd->data_length < 24) { pr_warn("SPC-PR: Received PR OUT parameter list" " length too small: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3820,7 +3891,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) * SPEC_I_PT=1 is only valid for Service action: REGISTER */ if (spec_i_pt && ((cdb[1] & 0x1f) != PRO_REGISTER)) { - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } @@ -3837,7 +3909,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) (cmd->data_length != 24)) { pr_warn("SPC-PR: Received PR OUT illegal parameter" " list length: %u\n", cmd->data_length); - ret = PYX_TRANSPORT_INVALID_PARAMETER_LIST; + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; goto out; } /* @@ -3878,7 +3951,8 @@ int target_scsi3_emulate_pr_out(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_OUT service" " action: 0x%02x\n", cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } @@ -3906,7 +3980,8 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_KEYS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -3965,7 +4040,8 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_RESERVATIONS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4047,7 +4123,8 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) if (cmd->data_length < 6) { pr_err("PRIN SA REPORT_CAPABILITIES SCSI Data Length:" " %u too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4108,7 +4185,8 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) if (cmd->data_length < 8) { pr_err("PRIN SA READ_FULL_STATUS SCSI Data Length: %u" " too small\n", cmd->data_length); - return PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; } buf = transport_kmap_first_data_page(cmd); @@ -4255,7 +4333,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) pr_err("Received PERSISTENT_RESERVE CDB while legacy" " SPC-2 reservation is held, returning" " RESERVATION_CONFLICT\n"); - return PYX_TRANSPORT_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EINVAL; } switch (cmd->t_task_cdb[1] & 0x1f) { @@ -4274,7 +4353,8 @@ int target_scsi3_emulate_pr_in(struct se_task *task) default: pr_err("Unknown PERSISTENT_RESERVE_IN service" " action: 0x%02x\n", cmd->t_task_cdb[1] & 0x1f); - ret = PYX_TRANSPORT_INVALID_CDB_FIELD; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + ret = -EINVAL; break; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index ed32e1efe429..8b15e56b0384 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -963,6 +963,7 @@ static inline struct bio *pscsi_get_bio(int sg_num) static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, struct bio **hbio) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; u32 task_sg_num = task->task_sg_nents; struct bio *bio = NULL, *tbio = NULL; @@ -971,7 +972,7 @@ static int pscsi_map_sg(struct se_task *task, struct scatterlist *task_sg, u32 data_len = task->task_size, i, len, bytes, off; int nr_pages = (task->task_size + task_sg[0].offset + PAGE_SIZE - 1) >> PAGE_SHIFT; - int nr_vecs = 0, rc, ret = PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + int nr_vecs = 0, rc; int rw = (task->task_data_direction == DMA_TO_DEVICE); *hbio = NULL; @@ -1058,11 +1059,13 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return ret; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } static int pscsi_do_task(struct se_task *task) { + struct se_cmd *cmd = task->task_se_cmd; struct pscsi_dev_virt *pdv = task->task_se_cmd->se_dev->dev_ptr; struct pscsi_plugin_task *pt = PSCSI_TASK(task); struct request *req; @@ -1078,7 +1081,9 @@ static int pscsi_do_task(struct se_task *task) if (!req || IS_ERR(req)) { pr_err("PSCSI: blk_get_request() failed: %ld\n", req ? IS_ERR(req) : -ENOMEM); - return PYX_TRANSPORT_LU_COMM_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENODEV; } } else { BUG_ON(!task->task_size); @@ -1087,8 +1092,11 @@ static int pscsi_do_task(struct se_task *task) * Setup the main struct request for the task->task_sg[] payload */ ret = pscsi_map_sg(task, task->task_sg, &hbio); - if (ret < 0) - return PYX_TRANSPORT_LU_COMM_FAILURE; + if (ret < 0) { + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return ret; + } req = blk_make_request(pdv->pdv_sd->request_queue, hbio, GFP_KERNEL); @@ -1115,7 +1123,7 @@ static int pscsi_do_task(struct se_task *task) (task->task_se_cmd->sam_task_attr == MSG_HEAD_TAG), pscsi_req_done); - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; fail: while (hbio) { @@ -1124,7 +1132,8 @@ fail: bio->bi_next = NULL; bio_endio(bio, 0); /* XXX: should be error */ } - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + return -ENOMEM; } /* pscsi_get_sense_buffer(): @@ -1198,9 +1207,8 @@ static inline void pscsi_process_SAM_status( " 0x%02x Result: 0x%08x\n", task, pt->pscsi_cdb[0], pt->pscsi_result); task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + task->task_se_cmd->scsi_sense_reason = + TCM_UNSUPPORTED_SCSI_OPCODE; transport_complete_task(task, 0); break; } diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 5158d3846f19..6d8a6881cfff 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -603,8 +603,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) task->task_scsi_status = GOOD; transport_complete_task(task, 1); - - return PYX_TRANSPORT_SENT_TO_TRANSPORT; + return 0; } /* rd_free_task(): (Part of se_subsystem_api_t template) diff --git a/drivers/target/target_core_tmr.c b/drivers/target/target_core_tmr.c index 217e29df6297..684522805a1f 100644 --- a/drivers/target/target_core_tmr.c +++ b/drivers/target/target_core_tmr.c @@ -345,10 +345,6 @@ static void core_tmr_drain_cmd_list( " %d t_fe_count: %d\n", (preempt_and_abort_list) ? "Preempt" : "", cmd, cmd->t_state, atomic_read(&cmd->t_fe_count)); - /* - * Signal that the command has failed via cmd->se_cmd_flags, - */ - transport_new_cmd_failure(cmd); core_tmr_handle_tas_abort(tmr_nacl, cmd, tas, atomic_read(&cmd->t_fe_count)); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3400ae6e93f8..a997fde9ffcb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -82,7 +82,7 @@ static int transport_generic_get_mem(struct se_cmd *cmd); static void transport_put_cmd(struct se_cmd *cmd); static void transport_remove_cmd_from_queue(struct se_cmd *cmd); static int transport_set_sense_codes(struct se_cmd *cmd, u8 asc, u8 ascq); -static void transport_generic_request_failure(struct se_cmd *, int, int); +static void transport_generic_request_failure(struct se_cmd *); static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) @@ -680,9 +680,9 @@ void transport_complete_sync_cache(struct se_cmd *cmd, int good) task->task_scsi_status = GOOD; } else { task->task_scsi_status = SAM_STAT_CHECK_CONDITION; - task->task_error_status = PYX_TRANSPORT_ILLEGAL_REQUEST; - task->task_se_cmd->transport_error_status = - PYX_TRANSPORT_ILLEGAL_REQUEST; + task->task_se_cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + } transport_complete_task(task, good); @@ -693,7 +693,7 @@ static void target_complete_failure_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - transport_generic_request_failure(cmd, 1, 1); + transport_generic_request_failure(cmd); } /* transport_complete_task(): @@ -755,10 +755,11 @@ void transport_complete_task(struct se_task *task, int success) if (cmd->t_tasks_failed) { if (!task->task_error_status) { task->task_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; - cmd->transport_error_status = - PYX_TRANSPORT_UNKNOWN_SAM_OPCODE; + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; } + INIT_WORK(&cmd->work, target_complete_failure_work); } else { atomic_set(&cmd->t_transport_complete, 1); @@ -1573,6 +1574,8 @@ int transport_generic_allocate_tasks( pr_err("Received SCSI CDB with command_size: %d that" " exceeds SCSI_MAX_VARLEN_CDB_SIZE: %d\n", scsi_command_size(cdb), SCSI_MAX_VARLEN_CDB_SIZE); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; return -EINVAL; } /* @@ -1588,6 +1591,9 @@ int transport_generic_allocate_tasks( " %u > sizeof(cmd->__t_task_cdb): %lu ops\n", scsi_command_size(cdb), (unsigned long)sizeof(cmd->__t_task_cdb)); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = + TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -ENOMEM; } } else @@ -1658,11 +1664,9 @@ int transport_handle_cdb_direct( * and call transport_generic_request_failure() if necessary.. */ ret = transport_generic_new_cmd(cmd); - if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, 0, - (cmd->data_direction != DMA_TO_DEVICE)); - } + if (ret < 0) + transport_generic_request_failure(cmd); + return 0; } EXPORT_SYMBOL(transport_handle_cdb_direct); @@ -1798,20 +1802,16 @@ static int transport_stop_tasks_for_cmd(struct se_cmd *cmd) /* * Handle SAM-esque emulation for generic transport request failures. */ -static void transport_generic_request_failure( - struct se_cmd *cmd, - int complete, - int sc) +static void transport_generic_request_failure(struct se_cmd *cmd) { int ret = 0; pr_debug("-----[ Storage Engine Exception for cmd: %p ITT: 0x%08x" " CDB: 0x%02x\n", cmd, cmd->se_tfo->get_task_tag(cmd), cmd->t_task_cdb[0]); - pr_debug("-----[ i_state: %d t_state: %d transport_error_status: %d\n", + pr_debug("-----[ i_state: %d t_state: %d scsi_sense_reason: %d\n", cmd->se_tfo->get_cmd_state(cmd), - cmd->t_state, - cmd->transport_error_status); + cmd->t_state, cmd->scsi_sense_reason); pr_debug("-----[ t_tasks: %d t_task_cdbs_left: %d" " t_task_cdbs_sent: %d t_task_cdbs_ex_left: %d --" " t_transport_active: %d t_transport_stop: %d" @@ -1829,46 +1829,19 @@ static void transport_generic_request_failure( if (cmd->se_dev->dev_task_attr_type == SAM_TASK_ATTR_EMULATED) transport_complete_task_attr(cmd); - if (complete) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - } - - switch (cmd->transport_error_status) { - case PYX_TRANSPORT_UNKNOWN_SAM_OPCODE: - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; - break; - case PYX_TRANSPORT_REQ_TOO_MANY_SECTORS: - cmd->scsi_sense_reason = TCM_SECTOR_COUNT_TOO_MANY; - break; - case PYX_TRANSPORT_INVALID_CDB_FIELD: - cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; - break; - case PYX_TRANSPORT_INVALID_PARAMETER_LIST: - cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; - break; - case PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES: - if (!sc) - transport_new_cmd_failure(cmd); - /* - * Currently for PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES, - * we force this session to fall back to session - * recovery. - */ - cmd->se_tfo->fall_back_to_erl0(cmd->se_sess); - cmd->se_tfo->stop_session(cmd->se_sess, 0, 0); - - goto check_stop; - case PYX_TRANSPORT_LU_COMM_FAILURE: - case PYX_TRANSPORT_ILLEGAL_REQUEST: - cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; - break; - case PYX_TRANSPORT_UNKNOWN_MODE_PAGE: - cmd->scsi_sense_reason = TCM_UNKNOWN_MODE_PAGE; - break; - case PYX_TRANSPORT_WRITE_PROTECTED: - cmd->scsi_sense_reason = TCM_WRITE_PROTECTED; + switch (cmd->scsi_sense_reason) { + case TCM_NON_EXISTENT_LUN: + case TCM_UNSUPPORTED_SCSI_OPCODE: + case TCM_INVALID_CDB_FIELD: + case TCM_INVALID_PARAMETER_LIST: + case TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE: + case TCM_UNKNOWN_MODE_PAGE: + case TCM_WRITE_PROTECTED: + case TCM_CHECK_CONDITION_ABORT_CMD: + case TCM_CHECK_CONDITION_UNIT_ATTENTION: + case TCM_CHECK_CONDITION_NOT_READY: break; - case PYX_TRANSPORT_RESERVATION_CONFLICT: + case TCM_RESERVATION_CONFLICT: /* * No SENSE Data payload for this case, set SCSI Status * and queue the response to $FABRIC_MOD. @@ -1893,15 +1866,9 @@ static void transport_generic_request_failure( if (ret == -EAGAIN || ret == -ENOMEM) goto queue_full; goto check_stop; - case PYX_TRANSPORT_USE_SENSE_REASON: - /* - * struct se_cmd->scsi_sense_reason already set - */ - break; default: pr_err("Unknown transport error for CDB 0x%02x: %d\n", - cmd->t_task_cdb[0], - cmd->transport_error_status); + cmd->t_task_cdb[0], cmd->scsi_sense_reason); cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; break; } @@ -1912,14 +1879,10 @@ static void transport_generic_request_failure( * transport_send_check_condition_and_sense() after handling * possible unsoliticied write data payloads. */ - if (!sc && !cmd->se_tfo->new_cmd_map) - transport_new_cmd_failure(cmd); - else { - ret = transport_send_check_condition_and_sense(cmd, - cmd->scsi_sense_reason, 0); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; - } + ret = transport_send_check_condition_and_sense(cmd, + cmd->scsi_sense_reason, 0); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; check_stop: transport_lun_remove_cmd(cmd); @@ -2077,8 +2040,8 @@ static int transport_execute_tasks(struct se_cmd *cmd) int add_tasks; if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { - cmd->transport_error_status = PYX_TRANSPORT_LU_COMM_FAILURE; - transport_generic_request_failure(cmd, 0, 1); + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; + transport_generic_request_failure(cmd); return 0; } @@ -2163,14 +2126,13 @@ check_depth: else error = dev->transport->do_task(task); if (error != 0) { - cmd->transport_error_status = error; spin_lock_irqsave(&cmd->t_state_lock, flags); task->task_flags &= ~TF_ACTIVE; spin_unlock_irqrestore(&cmd->t_state_lock, flags); atomic_set(&cmd->t_transport_sent, 0); transport_stop_tasks_for_cmd(cmd); atomic_inc(&dev->depth_left); - transport_generic_request_failure(cmd, 0, 1); + transport_generic_request_failure(cmd); } goto check_depth; @@ -2178,19 +2140,6 @@ check_depth: return 0; } -void transport_new_cmd_failure(struct se_cmd *se_cmd) -{ - unsigned long flags; - /* - * Any unsolicited data will get dumped for failed command inside of - * the fabric plugin - */ - spin_lock_irqsave(&se_cmd->t_state_lock, flags); - se_cmd->se_cmd_flags |= SCF_SE_CMD_FAILED; - se_cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - spin_unlock_irqrestore(&se_cmd->t_state_lock, flags); -} - static inline u32 transport_get_sectors_6( unsigned char *cdb, struct se_cmd *cmd, @@ -2460,27 +2409,6 @@ static int transport_get_sense_data(struct se_cmd *cmd) return -1; } -static int -transport_handle_reservation_conflict(struct se_cmd *cmd) -{ - cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; - cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; - cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT; - /* - * For UA Interlock Code 11b, a RESERVATION CONFLICT will - * establish a UNIT ATTENTION with PREVIOUS RESERVATION - * CONFLICT STATUS. - * - * See spc4r17, section 7.4.6 Control Mode Page, Table 349 - */ - if (cmd->se_sess && - cmd->se_dev->se_sub_dev->se_dev_attrib.emulate_ua_intlck_ctrl == 2) - core_scsi3_ua_allocate(cmd->se_sess->se_node_acl, - cmd->orig_fe_lun, 0x2C, - ASCQ_2CH_PREVIOUS_RESERVATION_CONFLICT_STATUS); - return -EINVAL; -} - static inline long long transport_dev_end_lba(struct se_device *dev) { return dev->transport->get_blocks(dev) + 1; @@ -2595,8 +2523,12 @@ static int transport_generic_cmd_sequencer( */ if (su_dev->t10_pr.pr_ops.t10_reservation_check(cmd, &pr_reg_type) != 0) { if (su_dev->t10_pr.pr_ops.t10_seq_non_holder( - cmd, cdb, pr_reg_type) != 0) - return transport_handle_reservation_conflict(cmd); + cmd, cdb, pr_reg_type) != 0) { + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->se_cmd_flags |= SCF_SCSI_RESERVATION_CONFLICT; + cmd->scsi_sense_reason = TCM_RESERVATION_CONFLICT; + return -EBUSY; + } /* * This means the CDB is allowed for the SCSI Initiator port * when said port is *NOT* holding the legacy SPC-2 or @@ -3813,7 +3745,7 @@ int transport_generic_new_cmd(struct se_cmd *cmd) cmd->data_length) { ret = transport_generic_get_mem(cmd); if (ret < 0) - return ret; + goto out_fail; } /* @@ -3929,7 +3861,7 @@ static int transport_generic_write_pending(struct se_cmd *cmd) else if (ret < 0) return ret; - return PYX_TRANSPORT_WRITE_PENDING; + return 1; queue_full: pr_debug("Handling write_pending QUEUE__FULL: se_cmd: %p\n", cmd); @@ -4602,9 +4534,6 @@ void transport_send_task_abort(struct se_cmd *cmd) if (cmd->se_tfo->write_pending_status(cmd) != 0) { atomic_inc(&cmd->t_transport_aborted); smp_mb__after_atomic_inc(); - cmd->scsi_status = SAM_STAT_TASK_ABORTED; - transport_new_cmd_failure(cmd); - return; } } cmd->scsi_status = SAM_STAT_TASK_ABORTED; @@ -4698,18 +4627,13 @@ get_cmd: } ret = cmd->se_tfo->new_cmd_map(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); break; } ret = transport_generic_new_cmd(cmd); if (ret < 0) { - cmd->transport_error_status = ret; - transport_generic_request_failure(cmd, - 0, (cmd->data_direction != - DMA_TO_DEVICE)); + transport_generic_request_failure(cmd); + break; } break; case TRANSPORT_PROCESS_WRITE: diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 4fac37c4c615..71fc9cea5dc9 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -200,7 +200,7 @@ int ft_write_pending(struct se_cmd *se_cmd) lport = ep->lp; fp = fc_frame_alloc(lport, sizeof(*txrdy)); if (!fp) - return PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES; + return -ENOMEM; /* Signal QUEUE_FULL */ txrdy = fc_frame_payload_get(fp, sizeof(*txrdy)); memset(txrdy, 0, sizeof(*txrdy)); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 7f5fed3c89e1..4d0cb6b8c478 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,7 +103,6 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, - SCF_SE_CMD_FAILED = 0x00000400, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -154,6 +153,7 @@ enum tcm_sense_reason_table { TCM_CHECK_CONDITION_ABORT_CMD = 0x0d, TCM_CHECK_CONDITION_UNIT_ATTENTION = 0x0e, TCM_CHECK_CONDITION_NOT_READY = 0x0f, + TCM_RESERVATION_CONFLICT = 0x10, }; struct se_obj { @@ -422,8 +422,6 @@ struct se_cmd { int sam_task_attr; /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; - /* Transport specific error status */ - int transport_error_status; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ int check_release:1; int cmd_wait_set:1; diff --git a/include/target/target_core_transport.h b/include/target/target_core_transport.h index c16e9431dd01..dac4f2d859fd 100644 --- a/include/target/target_core_transport.h +++ b/include/target/target_core_transport.h @@ -10,29 +10,6 @@ #define PYX_TRANSPORT_STATUS_INTERVAL 5 /* In seconds */ -#define PYX_TRANSPORT_SENT_TO_TRANSPORT 0 -#define PYX_TRANSPORT_WRITE_PENDING 1 - -#define PYX_TRANSPORT_UNKNOWN_SAM_OPCODE -1 -#define PYX_TRANSPORT_HBA_QUEUE_FULL -2 -#define PYX_TRANSPORT_REQ_TOO_MANY_SECTORS -3 -#define PYX_TRANSPORT_OUT_OF_MEMORY_RESOURCES -4 -#define PYX_TRANSPORT_INVALID_CDB_FIELD -5 -#define PYX_TRANSPORT_INVALID_PARAMETER_LIST -6 -#define PYX_TRANSPORT_LU_COMM_FAILURE -7 -#define PYX_TRANSPORT_UNKNOWN_MODE_PAGE -8 -#define PYX_TRANSPORT_WRITE_PROTECTED -9 -#define PYX_TRANSPORT_RESERVATION_CONFLICT -10 -#define PYX_TRANSPORT_ILLEGAL_REQUEST -11 -#define PYX_TRANSPORT_USE_SENSE_REASON -12 - -#ifndef SAM_STAT_RESERVATION_CONFLICT -#define SAM_STAT_RESERVATION_CONFLICT 0x18 -#endif - -#define TRANSPORT_PLUGIN_FREE 0 -#define TRANSPORT_PLUGIN_REGISTERED 1 - #define TRANSPORT_PLUGIN_PHBA_PDEV 1 #define TRANSPORT_PLUGIN_VHBA_PDEV 2 #define TRANSPORT_PLUGIN_VHBA_VDEV 3 @@ -158,7 +135,6 @@ extern int transport_generic_allocate_tasks(struct se_cmd *, unsigned char *); extern int transport_handle_cdb_direct(struct se_cmd *); extern int transport_generic_handle_cdb_map(struct se_cmd *); extern int transport_generic_handle_data(struct se_cmd *); -extern void transport_new_cmd_failure(struct se_cmd *); extern int transport_generic_handle_tmr(struct se_cmd *); extern bool target_stop_task(struct se_task *task, unsigned long *flags); extern int transport_generic_map_mem_to_cmd(struct se_cmd *cmd, struct scatterlist *, u32, -- cgit v1.2.3-70-g09d2 From 0957627a99604f379d35831897a2aa15272528fc Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 4 Nov 2011 11:36:38 -0700 Subject: iscsi-target: Fix sess allocation leak in iscsi_login_zero_tsih_s1 This patch adds missing kfree() for an allocation in iscsi_login_zero_tsih_s1() code, and make transport_init_session() check for IS_ERR() returns. Reported-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_login.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index daad362a93ce..d734bdec24f9 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -224,7 +224,7 @@ static int iscsi_login_zero_tsih_s1( iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Could not allocate memory for session\n"); - return -1; + return -ENOMEM; } iscsi_login_set_conn_values(sess, conn, pdu->cid); @@ -250,7 +250,8 @@ static int iscsi_login_zero_tsih_s1( pr_err("idr_pre_get() for sess_idr failed\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } spin_lock(&sess_idr_lock); idr_get_new(&sess_idr, NULL, &sess->session_index); @@ -270,14 +271,16 @@ static int iscsi_login_zero_tsih_s1( ISCSI_LOGIN_STATUS_NO_RESOURCES); pr_err("Unable to allocate memory for" " struct iscsi_sess_ops.\n"); - return -1; + kfree(sess); + return -ENOMEM; } sess->se_sess = transport_init_session(); - if (!sess->se_sess) { + if (IS_ERR(sess->se_sess)) { iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); - return -1; + kfree(sess); + return -ENOMEM; } return 0; -- cgit v1.2.3-70-g09d2 From 330694a50f5b80e983136237c10516810fb427a9 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Sun, 6 Nov 2011 18:37:23 +0100 Subject: target: Improve system responsivity during I/O While testing ib_srpt I noticed that the target system became rather unresponsive during intensive I/O. The patch below made my target system responsive again during I/O without decreasing performance. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a997fde9ffcb..06cce8178fcf 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4599,8 +4599,6 @@ static int transport_processing_thread(void *param) struct se_cmd *cmd; struct se_device *dev = (struct se_device *) param; - set_user_nice(current, -20); - while (!kthread_should_stop()) { ret = wait_event_interruptible(dev->dev_queue_obj.thread_wq, atomic_read(&dev->dev_queue_obj.queue_cnt) || -- cgit v1.2.3-70-g09d2 From 5f655e8d2a7cdc41943f929e86054051d7441ec5 Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Tue, 8 Nov 2011 20:46:29 +0100 Subject: target: Avoid compiler warnings about signed one-bit bitfields Convert to unsigned bit fields for active I/O shutdown fields. Signed-off-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 4d0cb6b8c478..36a06f79c973 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -423,8 +423,8 @@ struct se_cmd { /* Transport protocol dependent state, see transport_state_table */ enum transport_state_table t_state; /* Used to signal cmd->se_tfo->check_release_cmd() usage per cmd */ - int check_release:1; - int cmd_wait_set:1; + unsigned check_release:1; + unsigned cmd_wait_set:1; /* See se_cmd_flags_table */ u32 se_cmd_flags; u32 se_ordered_id; @@ -560,7 +560,7 @@ struct se_node_acl { } ____cacheline_aligned; struct se_session { - int sess_tearing_down:1; + unsigned sess_tearing_down:1; u64 sess_bin_isid; struct se_node_acl *se_node_acl; struct se_portal_group *se_tpg; -- cgit v1.2.3-70-g09d2 From 97c34f3b04978799fd6eada69e1a8d84b74d9599 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 10 Nov 2011 11:22:47 -0800 Subject: target: Get rid of unused se_cmd_cache Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 06cce8178fcf..b4073d283408 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -61,7 +61,6 @@ static int sub_api_initialized; static struct workqueue_struct *target_completion_wq; -static struct kmem_cache *se_cmd_cache; static struct kmem_cache *se_sess_cache; struct kmem_cache *se_tmr_req_cache; struct kmem_cache *se_ua_cache; @@ -87,19 +86,13 @@ static void target_complete_ok_work(struct work_struct *work); int init_se_kmem_caches(void) { - se_cmd_cache = kmem_cache_create("se_cmd_cache", - sizeof(struct se_cmd), __alignof__(struct se_cmd), 0, NULL); - if (!se_cmd_cache) { - pr_err("kmem_cache_create for struct se_cmd failed\n"); - goto out; - } se_tmr_req_cache = kmem_cache_create("se_tmr_cache", sizeof(struct se_tmr_req), __alignof__(struct se_tmr_req), 0, NULL); if (!se_tmr_req_cache) { pr_err("kmem_cache_create() for struct se_tmr_req" " failed\n"); - goto out_free_cmd_cache; + goto out; } se_sess_cache = kmem_cache_create("se_sess_cache", sizeof(struct se_session), __alignof__(struct se_session), @@ -182,8 +175,6 @@ out_free_sess_cache: kmem_cache_destroy(se_sess_cache); out_free_tmr_req_cache: kmem_cache_destroy(se_tmr_req_cache); -out_free_cmd_cache: - kmem_cache_destroy(se_cmd_cache); out: return -ENOMEM; } @@ -191,7 +182,6 @@ out: void release_se_kmem_caches(void) { destroy_workqueue(target_completion_wq); - kmem_cache_destroy(se_cmd_cache); kmem_cache_destroy(se_tmr_req_cache); kmem_cache_destroy(se_sess_cache); kmem_cache_destroy(se_ua_cache); -- cgit v1.2.3-70-g09d2 From 6297b07cbc42eb6b53eb88fce70a4727ea230797 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sat, 12 Nov 2011 09:29:51 -0800 Subject: target: Drop config_item_name usage in fabric TFO->free_wwn() This patch removes config_item_name() informational usage of TFO->free_wwn() treewide in loopback, tcm_fc, ib_srpt and tcm_vhost module code. Using v4 target_core_fabric_configfs.c logic, a fabric call for config_item_name() in TFO->drop_wwn() context returns NULL as target_fabric_drop_wwn() invoking config_item_put() -> config_group_put() will release fabric_port->port_wwn.wwn_group before the last config_item_put() -> TFO->drop_wwn() is invoked. Reported-by: Bart Van Assche Signed-off-by: Nicholas Bellinger --- drivers/target/loopback/tcm_loop.c | 9 ++++----- drivers/target/tcm_fc/tfc_conf.c | 3 +-- 2 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index cbf5e4513741..0ca89f02e26f 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -1342,17 +1342,16 @@ void tcm_loop_drop_scsi_hba( { struct tcm_loop_hba *tl_hba = container_of(wwn, struct tcm_loop_hba, tl_hba_wwn); - int host_no = tl_hba->sh->host_no; + + pr_debug("TCM_Loop_ConfigFS: Deallocating emulated Target" + " SAS Address: %s at Linux/SCSI Host ID: %d\n", + tl_hba->tl_wwn_address, tl_hba->sh->host_no); /* * Call device_unregister() on the original tl_hba->dev. * tcm_loop_fabric_scsi.c:tcm_loop_release_adapter() will * release *tl_hba; */ device_unregister(&tl_hba->dev); - - pr_debug("TCM_Loop_ConfigFS: Deallocated emulated Target" - " SAS Address: %s at Linux/SCSI Host ID: %d\n", - config_item_name(&wwn->wwn_group.cg_item), host_no); } /* Start items for tcm_loop_cit */ diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index 5f770412ca40..9402b7387cac 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -436,8 +436,7 @@ static void ft_del_lport(struct se_wwn *wwn) struct ft_lport_acl *lacl = container_of(wwn, struct ft_lport_acl, fc_lport_wwn); - pr_debug("del lport %s\n", - config_item_name(&wwn->wwn_group.cg_item)); + pr_debug("del lport %s\n", lacl->name); mutex_lock(&ft_lport_lock); list_del(&lacl->list); mutex_unlock(&ft_lport_lock); -- cgit v1.2.3-70-g09d2 From 58a2801a4b9ad97d3685bb7a3344e17d60292908 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:27 -0500 Subject: target: remove the se_obj_ptr and se_orig_obj_ptr se_cmd fields We already have a perfectly valid se_device pointer in the command, so remove the mostly useless duplicates. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 3 --- drivers/target/target_core_transport.c | 2 +- include/target/target_core_base.h | 2 -- 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 07953284ea6f..dd5adb82e3df 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -104,7 +104,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_cmd->se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); @@ -137,7 +136,6 @@ int transport_lookup_cmd_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->se_lun = &se_sess->se_tpg->tpg_virt_lun0; se_cmd->orig_fe_lun = 0; - se_cmd->se_orig_obj_ptr = se_cmd->se_lun->lun_se_dev; se_cmd->se_cmd_flags |= SCF_SE_LUN_CMD; } /* @@ -200,7 +198,6 @@ int transport_lookup_tmr_lun(struct se_cmd *se_cmd, u32 unpacked_lun) se_lun = deve->se_lun; se_cmd->pr_res_key = deve->pr_res_key; se_cmd->orig_fe_lun = unpacked_lun; - se_cmd->se_orig_obj_ptr = se_cmd->se_dev; } spin_unlock_irqrestore(&se_sess->se_node_acl->device_list_lock, flags); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index b4073d283408..db2271c18030 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2029,7 +2029,7 @@ static int transport_execute_tasks(struct se_cmd *cmd) { int add_tasks; - if (se_dev_check_online(cmd->se_orig_obj_ptr) != 0) { + if (se_dev_check_online(cmd->se_dev) != 0) { cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; transport_generic_request_failure(cmd); return 0; diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 36a06f79c973..f63997316dab 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -444,8 +444,6 @@ struct se_cmd { struct list_head se_qf_node; struct se_device *se_dev; struct se_dev_entry *se_deve; - struct se_device *se_obj_ptr; - struct se_device *se_orig_obj_ptr; struct se_lun *se_lun; /* Only used for internal passthrough and legacy TCM fabric modules */ struct se_session *se_sess; -- cgit v1.2.3-70-g09d2 From aad13ca20d960ab74b739d7bbe876dac4502f546 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:28 -0500 Subject: target: remove the se_ordered_node se_cmd field We never walk ordered_cmd_list in the se_device, so remove all code related to supporting it. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 11 ----------- include/target/target_core_base.h | 3 --- 2 files changed, 14 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index db2271c18030..a66050ec2c2f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1332,12 +1332,10 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->dev_tmr_list); INIT_LIST_HEAD(&dev->execute_task_list); INIT_LIST_HEAD(&dev->delayed_cmd_list); - INIT_LIST_HEAD(&dev->ordered_cmd_list); INIT_LIST_HEAD(&dev->state_task_list); INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->ordered_cmd_lock); spin_lock_init(&dev->state_task_lock); spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); @@ -1498,7 +1496,6 @@ void transport_init_se_cmd( { INIT_LIST_HEAD(&cmd->se_lun_node); INIT_LIST_HEAD(&cmd->se_delayed_node); - INIT_LIST_HEAD(&cmd->se_ordered_node); INIT_LIST_HEAD(&cmd->se_qf_node); INIT_LIST_HEAD(&cmd->se_queue_node); INIT_LIST_HEAD(&cmd->se_cmd_list); @@ -1963,11 +1960,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) cmd->se_ordered_id); return 1; } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&cmd->se_dev->ordered_cmd_lock); - list_add_tail(&cmd->se_ordered_node, - &cmd->se_dev->ordered_cmd_list); - spin_unlock(&cmd->se_dev->ordered_cmd_lock); - atomic_inc(&cmd->se_dev->dev_ordered_sync); smp_mb__after_atomic_inc(); @@ -3100,11 +3092,8 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_ORDERED_TAG) { - spin_lock(&dev->ordered_cmd_lock); - list_del(&cmd->se_ordered_node); atomic_dec(&dev->dev_ordered_sync); smp_mb__after_atomic_dec(); - spin_unlock(&dev->ordered_cmd_lock); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED:" diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index f63997316dab..29773342f2c6 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -439,7 +439,6 @@ struct se_cmd { /* Used for sense data */ void *sense_buffer; struct list_head se_delayed_node; - struct list_head se_ordered_node; struct list_head se_lun_node; struct list_head se_qf_node; struct se_device *se_dev; @@ -730,7 +729,6 @@ struct se_device { struct se_obj dev_export_obj; struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; - spinlock_t ordered_cmd_lock; spinlock_t execute_task_lock; spinlock_t state_task_lock; spinlock_t dev_alua_lock; @@ -756,7 +754,6 @@ struct se_device { struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; - struct list_head ordered_cmd_list; struct list_head execute_task_list; struct list_head state_task_list; struct list_head qf_cmd_list; -- cgit v1.2.3-70-g09d2 From 2d3a4b51df4db2ee0415f42a63b9629a7977b975 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:29 -0500 Subject: target: remove the t_tasks_fua se_cmd field And use a SCF_FUA flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 2 +- drivers/target/target_core_iblock.c | 2 +- drivers/target/target_core_transport.c | 15 ++++++++++----- include/target/target_core_base.h | 2 +- 4 files changed, 13 insertions(+), 8 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index cdd47e8c7366..38211322415e 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -438,7 +438,7 @@ static int fd_do_task(struct se_task *task) if (ret > 0 && dev->se_sub_dev->se_dev_attrib.emulate_write_cache > 0 && dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - cmd->t_tasks_fua) { + (cmd->se_cmd_flags & SCF_FUA)) { /* * We might need to be a bit smarter here * and return some sense data to let the initiator diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index c670b8c2c994..4aa992204438 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -531,7 +531,7 @@ static int iblock_do_task(struct se_task *task) */ if (dev->se_sub_dev->se_dev_attrib.emulate_write_cache == 0 || (dev->se_sub_dev->se_dev_attrib.emulate_fua_write > 0 && - task->task_se_cmd->t_tasks_fua)) + (cmd->se_cmd_flags & SCF_FUA))) rw = WRITE_FUA; else rw = WRITE; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index a66050ec2c2f..866af5d5869f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2572,7 +2572,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_12: @@ -2581,7 +2582,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_32(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case WRITE_16: @@ -2590,7 +2592,8 @@ static int transport_generic_cmd_sequencer( goto out_unsupported_cdb; size = transport_get_size(sectors, cdb, cmd); cmd->t_task_lba = transport_lba_64(cdb); - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; cmd->se_cmd_flags |= SCF_SCSI_DATA_SG_IO_CDB; break; case XDWRITEREAD_10: @@ -2614,7 +2617,8 @@ static int transport_generic_cmd_sequencer( * Setup BIDI XOR callback to be run after I/O completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[1] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case VARIABLE_LENGTH_CMD: service_action = get_unaligned_be16(&cdb[8]); @@ -2642,7 +2646,8 @@ static int transport_generic_cmd_sequencer( * completion. */ cmd->transport_complete_callback = &transport_xor_callback; - cmd->t_tasks_fua = (cdb[10] & 0x8); + if (cdb[1] & 0x8) + cmd->se_cmd_flags |= SCF_FUA; break; case WRITE_SAME_32: sectors = transport_get_sectors_32(cdb, cmd, §or_ret); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 29773342f2c6..357af4546d25 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -103,6 +103,7 @@ enum se_cmd_flags_table { SCF_SCSI_NON_DATA_CDB = 0x00000040, SCF_SCSI_CDB_EXCEPTION = 0x00000080, SCF_SCSI_RESERVATION_CONFLICT = 0x00000100, + SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, SCF_SENT_CHECK_CONDITION = 0x00004000, @@ -458,7 +459,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - int t_tasks_fua; bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; -- cgit v1.2.3-70-g09d2 From 33c3fafc43e56a22be60ebe67bec5ba763d51010 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:30 -0500 Subject: target: remove the t_tasks_bidi se_cmd field And use a SCF_BIDI flag instead. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/loopback/tcm_loop.c | 8 +++----- drivers/target/target_core_transport.c | 2 +- include/target/target_core_base.h | 2 +- 3 files changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c index 0ca89f02e26f..81d5832fbbd5 100644 --- a/drivers/target/loopback/tcm_loop.c +++ b/drivers/target/loopback/tcm_loop.c @@ -113,11 +113,9 @@ static struct se_cmd *tcm_loop_allocate_core_cmd( scsi_bufflen(sc), sc->sc_data_direction, sam_task_attr, &tl_cmd->tl_sense_buf[0]); - /* - * Signal BIDI usage with T_TASK(cmd)->t_tasks_bidi - */ if (scsi_bidi_cmnd(sc)) - se_cmd->t_tasks_bidi = 1; + se_cmd->se_cmd_flags |= SCF_BIDI; + /* * Locate the struct se_lun pointer and attach it to struct se_cmd */ @@ -154,7 +152,7 @@ static int tcm_loop_new_cmd_map(struct se_cmd *se_cmd) * For BIDI commands, pass in the extra READ buffer * to transport_generic_map_mem_to_cmd() below.. */ - if (se_cmd->t_tasks_bidi) { + if (se_cmd->se_cmd_flags & SCF_BIDI) { struct scsi_data_buffer *sdb = scsi_in(sc); sgl_bidi = sdb->table.sgl; diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 866af5d5869f..8f29f472c50b 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2598,7 +2598,7 @@ static int transport_generic_cmd_sequencer( break; case XDWRITEREAD_10: if ((cmd->data_direction != DMA_TO_DEVICE) || - !(cmd->t_tasks_bidi)) + !(cmd->se_cmd_flags & SCF_BIDI)) goto out_invalid_cdb_field; sectors = transport_get_sectors_10(cdb, cmd, §or_ret); if (sector_ret) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 357af4546d25..3f9e4da5bd9f 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -106,6 +106,7 @@ enum se_cmd_flags_table { SCF_FUA = 0x00000200, SCF_SE_LUN_CMD = 0x00000800, SCF_SE_ALLOW_EOO = 0x00001000, + SCF_BIDI = 0x00002000, SCF_SENT_CHECK_CONDITION = 0x00004000, SCF_OVERFLOW_BIT = 0x00008000, SCF_UNDERFLOW_BIT = 0x00010000, @@ -459,7 +460,6 @@ struct se_cmd { unsigned char __t_task_cdb[TCM_MAX_COMMAND_SIZE]; unsigned long long t_task_lba; int t_tasks_failed; - bool t_tasks_bidi; u32 t_tasks_sg_chained_no; atomic_t t_fe_count; atomic_t t_se_count; -- cgit v1.2.3-70-g09d2 From 6fd126ffebef3897d8fca98644a9fd1cc5c7a5e3 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 14 Nov 2011 11:36:31 -0500 Subject: target: remove the unused t_task_pt_sgl and t_task_pt_sgl_num se_cmd fields Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- include/target/target_core_base.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3f9e4da5bd9f..3a21e2234d2b 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -484,14 +484,6 @@ struct se_cmd { struct work_struct work; - /* - * Used for pre-registered fabric SGL passthrough WRITE and READ - * with the special SCF_PASSTHROUGH_CONTIG_TO_SG case for TCM_Loop - * and other HW target mode fabric modules. - */ - struct scatterlist *t_task_pt_sgl; - u32 t_task_pt_sgl_num; - struct scatterlist *t_data_sg; unsigned int t_data_nents; struct scatterlist *t_bidi_data_sg; -- cgit v1.2.3-70-g09d2 From fef58a6096770ed6ab49103a430cc755254a74d9 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 22:13:24 -0800 Subject: target: Reject SCSI data overflow for fabrics using transport_generic_map_mem_to_cmd This patch changes transport_generic_map_mem_to_cmd() to reject SCSI data overflow and to send exception status with CHECK_CONDITION + TCM_INVALID_CDB_FIELD for fabrics that are passing a pre-populated struct scatterlist (eg: tcm_loop and iscsi-target) being mapped into se_cmd->t_data_sg and se_cmd->t_data_nents. This addresses an OOPs where transport_allocate_data_tasks() would walk the incorrect post OVERFLOW cmd->data_length value beyond the end of the passed scatterlist. Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8f29f472c50b..0bdb6badbf99 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3411,6 +3411,18 @@ int transport_generic_map_mem_to_cmd( if ((cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB) || (cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB)) { + /* + * Reject SCSI data overflow with map_mem_to_cmd() as incoming + * scatterlists already have been set to follow what the fabric + * passes for the original expected data transfer length. + */ + if (cmd->se_cmd_flags & SCF_OVERFLOW_BIT) { + pr_warn("Rejecting SCSI DATA overflow for fabric using" + " SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC\n"); + cmd->se_cmd_flags |= SCF_SCSI_CDB_EXCEPTION; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } cmd->t_data_sg = sgl; cmd->t_data_nents = sgl_count; -- cgit v1.2.3-70-g09d2 From 7e46cf02687e40197ae07c623e660be2a2720064 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 15 Nov 2011 23:59:00 -0800 Subject: iscsi-target: Fix residual count hanlding + remove iscsi_cmd->residual_count This patch fixes iscsi-target handling of underflow where residual data is causing an OOPs by using the incorrect iscsi_cmd_t->data_length initially assigned in iscsit_allocate_se_cmd(). It resets iscsi_cmd_t->data_length from se_cmd_t->data_length after transport_generic_allocate_tasks() has been invoked in iscsit_handle_scsi_cmd() RX context, and converts iscsi_cmd->residual_count usage to access iscsi_cmd->se_cmd.residual_count to get the proper residual count set by target-core. Reported-by: Cc: Christoph Hellwig Cc: Andy Grover Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 10 ++++++---- drivers/target/iscsi/iscsi_target_core.h | 1 - 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 4d81e1007c92..26834eff8960 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1039,6 +1039,8 @@ done: */ send_check_condition = 1; } else { + cmd->data_length = cmd->se_cmd.data_length; + if (iscsit_decide_list_to_build(cmd, payload_length) < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, @@ -2508,10 +2510,10 @@ static int iscsit_send_data_in( if (hdr->flags & ISCSI_FLAG_DATA_STATUS) { if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_DATA_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } } hton24(hdr->dlength, datain.length); @@ -3013,10 +3015,10 @@ static int iscsit_send_status( hdr->flags |= ISCSI_FLAG_CMD_FINAL; if (cmd->se_cmd.se_cmd_flags & SCF_OVERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_OVERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } else if (cmd->se_cmd.se_cmd_flags & SCF_UNDERFLOW_BIT) { hdr->flags |= ISCSI_FLAG_CMD_UNDERFLOW; - hdr->residual_count = cpu_to_be32(cmd->residual_count); + hdr->residual_count = cpu_to_be32(cmd->se_cmd.residual_count); } hdr->response = cmd->iscsi_response; hdr->cmd_status = cmd->se_cmd.scsi_status; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 3723d90d5ae5..0e96a6b13174 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -398,7 +398,6 @@ struct iscsi_cmd { u32 pdu_send_order; /* Current struct iscsi_pdu in struct iscsi_cmd->pdu_list */ u32 pdu_start; - u32 residual_count; /* Next struct iscsi_seq to send in struct iscsi_cmd->seq_list */ u32 seq_send_order; /* Number of struct iscsi_seq in struct iscsi_cmd->seq_list */ -- cgit v1.2.3-70-g09d2 From 7ae0b1038f9f7d4c91e9afd4dbbc98210bf1a241 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Sun, 27 Nov 2011 22:25:14 -0800 Subject: iscsi-target: Add missing F_BIT for iscsi_tm_rsp This patch sets the missing ISCSI_FLAG_CMD_FINAL bit in iscsit_send_task_mgt_rsp() for a struct iscsi_tm_rsp PDU. This usage is hardcoded for all TM response PDUs in RFC-3720 section 10.6. Reported-by: whucecil Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 26834eff8960..02de527940de 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3130,6 +3130,7 @@ static int iscsit_send_task_mgt_rsp( hdr = (struct iscsi_tm_rsp *) cmd->pdu; memset(hdr, 0, ISCSI_HDR_LEN); hdr->opcode = ISCSI_OP_SCSI_TMFUNC_RSP; + hdr->flags = ISCSI_FLAG_CMD_FINAL; hdr->response = iscsit_convert_tcm_tmr_rsp(se_tmr); hdr->itt = cpu_to_be32(cmd->init_task_tag); cmd->stat_sn = conn->stat_sn++; -- cgit v1.2.3-70-g09d2 From 1c3d5794fc4a2afd2258b3aa6406377934a36663 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Thu, 17 Nov 2011 23:43:40 +0100 Subject: iscsi-target: Use kmemdup rather than duplicating its implementation The semantic patch that makes this change is available in scripts/coccinelle/api/memdup.cocci. Signed-off-by: Thomas Meyer Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 6 ++---- drivers/target/iscsi/iscsi_target_nego.c | 3 +-- 2 files changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 02de527940de..8599545cdf9e 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -614,13 +614,12 @@ int iscsit_add_reject( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); spin_lock_bh(&conn->cmd_lock); list_add_tail(&cmd->i_list, &conn->conn_cmd_list); @@ -661,13 +660,12 @@ int iscsit_add_reject_from_cmd( hdr = (struct iscsi_reject *) cmd->pdu; hdr->reason = reason; - cmd->buf_ptr = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + cmd->buf_ptr = kmemdup(buf, ISCSI_HDR_LEN, GFP_KERNEL); if (!cmd->buf_ptr) { pr_err("Unable to allocate memory for cmd->buf_ptr\n"); iscsit_release_cmd(cmd); return -1; } - memcpy(cmd->buf_ptr, buf, ISCSI_HDR_LEN); if (add_to_conn) { spin_lock_bh(&conn->cmd_lock); diff --git a/drivers/target/iscsi/iscsi_target_nego.c b/drivers/target/iscsi/iscsi_target_nego.c index 426cd4bf6a9a..98936cb7c294 100644 --- a/drivers/target/iscsi/iscsi_target_nego.c +++ b/drivers/target/iscsi/iscsi_target_nego.c @@ -981,14 +981,13 @@ struct iscsi_login *iscsi_target_init_negotiation( return NULL; } - login->req = kzalloc(ISCSI_HDR_LEN, GFP_KERNEL); + login->req = kmemdup(login_pdu, ISCSI_HDR_LEN, GFP_KERNEL); if (!login->req) { pr_err("Unable to allocate memory for Login Request.\n"); iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, ISCSI_LOGIN_STATUS_NO_RESOURCES); goto out; } - memcpy(login->req, login_pdu, ISCSI_HDR_LEN); login->req_buf = kzalloc(MAX_KEY_VALUE_PAIRS, GFP_KERNEL); if (!login->req_buf) { -- cgit v1.2.3-70-g09d2 From 410f670202f0f13cdac8459b9c3effeeead135d1 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:32 -0800 Subject: target: Don't return an error status for 0-length READ and WRITE IO commands with a TRANSFER LENGTH of 0 are not an error; for example, for READ (10) and WRITE (10), SBC-3 says: A TRANSFER LENGTH field set to zero specifies that no logical blocks shall be read. This condition shall not be considered an error. In case we have nothing to do, just complete the command with good status. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 0bdb6badbf99..1b760a0b1109 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3770,8 +3770,15 @@ int transport_generic_new_cmd(struct se_cmd *cmd) task_cdbs = transport_allocate_control_task(cmd); } - if (task_cdbs <= 0) + if (task_cdbs < 0) goto out_fail; + else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { + cmd->t_state = TRANSPORT_COMPLETE; + atomic_set(&cmd->t_transport_active, 1); + INIT_WORK(&cmd->work, target_complete_ok_work); + queue_work(target_completion_wq, &cmd->work); + return 0; + } if (set_counts) { atomic_inc(&cmd->t_fe_count); -- cgit v1.2.3-70-g09d2 From 9b5cd7f37e1e018432111333e2a67f78ba41edfe Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:33 -0800 Subject: target: Handle 0 correctly in transport_get_sectors_6() SBC-3 says: A TRANSFER LENGTH field set to zero specifies that 256 logical blocks shall be written. Any other value specifies the number of logical blocks that shall be written. The old code was always just returning the value in the TRANSFER LENGTH byte. Fix this to return 256 if the byte is 0. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 1b760a0b1109..9faaaae78b0a 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2144,10 +2144,15 @@ static inline u32 transport_get_sectors_6( /* * Everything else assume TYPE_DISK Sector CDB location. - * Use 8-bit sector value. + * Use 8-bit sector value. SBC-3 says: + * + * A TRANSFER LENGTH field set to zero specifies that 256 + * logical blocks shall be written. Any other value + * specifies the number of logical blocks that shall be + * written. */ type_disk: - return (u32)cdb[4]; + return cdb[4] ? : 256; } static inline u32 transport_get_sectors_10( -- cgit v1.2.3-70-g09d2 From 1289a0571c037b4757f60597d646aedb70361ec3 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 22 Nov 2011 13:51:34 -0800 Subject: target: Fix page length in emulated INQUIRY VPD page 86h The LSB of the page length is at offset 3, not 2. Signed-off-by: Roland Dreier Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 8013a5a7bf64..831468b3163d 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -478,7 +478,7 @@ target_emulate_evpd_86(struct se_cmd *cmd, unsigned char *buf) if (cmd->data_length < 60) return 0; - buf[2] = 0x3c; + buf[3] = 0x3c; /* Set HEADSUP, ORDSUP, SIMPSUP */ buf[5] = 0x07; -- cgit v1.2.3-70-g09d2 From 5c73b678f729ea087ef57b59a5d7b5dd3a97042b Mon Sep 17 00:00:00 2001 From: Jörn Engel Date: Thu, 24 Nov 2011 02:04:16 +0100 Subject: target: remove unused struct fields Some are never used, some are set but never read, dev_hoq_count is incremented and decremented, but never read. Signed-off-by: Joern Engel Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 2 -- drivers/target/target_core_alua.c | 2 -- drivers/target/target_core_transport.c | 8 -------- include/target/target_core_base.h | 18 ------------------ 4 files changed, 30 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index 0e96a6b13174..f1a02dad05a0 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -534,7 +534,6 @@ struct iscsi_conn { atomic_t connection_exit; atomic_t connection_recovery; atomic_t connection_reinstatement; - atomic_t connection_wait; atomic_t connection_wait_rcfr; atomic_t sleep_on_conn_wait_comp; atomic_t transport_failed; @@ -642,7 +641,6 @@ struct iscsi_session { atomic_t session_reinstatement; atomic_t session_stop_active; atomic_t sleep_on_sess_wait_comp; - atomic_t transport_wait_cmds; /* connection list */ struct list_head sess_conn_list; struct list_head cr_active_list; diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index cd61331c1482..1dcbef499d6a 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -1191,7 +1191,6 @@ void core_alua_free_lu_gp(struct t10_alua_lu_gp *lu_gp) * struct t10_alua_lu_gp. */ spin_lock(&lu_gps_lock); - atomic_set(&lu_gp->lu_gp_shutdown, 1); list_del(&lu_gp->lu_gp_node); alua_lu_gps_count--; spin_unlock(&lu_gps_lock); @@ -1445,7 +1444,6 @@ struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem( tg_pt_gp_mem->tg_pt = port; port->sep_alua_tg_pt_gp_mem = tg_pt_gp_mem; - atomic_set(&port->sep_tg_pt_gp_active, 1); return tg_pt_gp_mem; } diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9faaaae78b0a..0257658e2e3e 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1326,7 +1326,6 @@ struct se_device *transport_add_device_to_core_hba( dev->se_hba = hba; dev->se_sub_dev = se_dev; dev->transport = transport; - atomic_set(&dev->active_cmds, 0); INIT_LIST_HEAD(&dev->dev_list); INIT_LIST_HEAD(&dev->dev_sep_list); INIT_LIST_HEAD(&dev->dev_tmr_list); @@ -1336,11 +1335,8 @@ struct se_device *transport_add_device_to_core_hba( INIT_LIST_HEAD(&dev->qf_cmd_list); spin_lock_init(&dev->execute_task_lock); spin_lock_init(&dev->delayed_cmd_lock); - spin_lock_init(&dev->state_task_lock); - spin_lock_init(&dev->dev_alua_lock); spin_lock_init(&dev->dev_reservation_lock); spin_lock_init(&dev->dev_status_lock); - spin_lock_init(&dev->dev_status_thr_lock); spin_lock_init(&dev->se_port_lock); spin_lock_init(&dev->se_tmr_lock); spin_lock_init(&dev->qf_cmd_lock); @@ -1952,8 +1948,6 @@ static inline int transport_execute_task_attr(struct se_cmd *cmd) * to allow the passed struct se_cmd list of tasks to the front of the list. */ if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_inc(&cmd->se_dev->dev_hoq_count); - smp_mb__after_atomic_inc(); pr_debug("Added HEAD_OF_QUEUE for CDB:" " 0x%02x, se_ordered_id: %u\n", cmd->t_task_cdb[0], @@ -3095,8 +3089,6 @@ static void transport_complete_task_attr(struct se_cmd *cmd) " SIMPLE: %u\n", dev->dev_cur_ordered_id, cmd->se_ordered_id); } else if (cmd->sam_task_attr == MSG_HEAD_TAG) { - atomic_dec(&dev->dev_hoq_count); - smp_mb__after_atomic_dec(); dev->dev_cur_ordered_id++; pr_debug("Incremented dev_cur_ordered_id: %u for" " HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id, diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 3a21e2234d2b..098a15611aba 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -213,7 +213,6 @@ struct t10_alua_lu_gp { u16 lu_gp_id; int lu_gp_valid_id; u32 lu_gp_members; - atomic_t lu_gp_shutdown; atomic_t lu_gp_ref_cnt; spinlock_t lu_gp_lock; struct config_group lu_gp_group; @@ -679,9 +678,6 @@ struct se_subsystem_dev { } ____cacheline_aligned; struct se_device { - /* Set to 1 if thread is NOT sleeping on thread_sem */ - u8 thread_active; - u8 dev_status_timer_flags; /* RELATIVE TARGET PORT IDENTIFER Counter */ u16 dev_rpti_counter; /* Used for SAM Task Attribute ordering */ @@ -706,14 +702,10 @@ struct se_device { u64 write_bytes; spinlock_t stats_lock; /* Active commands on this virtual SE device */ - atomic_t active_cmds; atomic_t simple_cmds; atomic_t depth_left; atomic_t dev_ordered_id; - atomic_t dev_tur_active; atomic_t execute_tasks; - atomic_t dev_status_thr_count; - atomic_t dev_hoq_count; atomic_t dev_ordered_sync; atomic_t dev_qf_count; struct se_obj dev_obj; @@ -722,12 +714,8 @@ struct se_device { struct se_queue_obj dev_queue_obj; spinlock_t delayed_cmd_lock; spinlock_t execute_task_lock; - spinlock_t state_task_lock; - spinlock_t dev_alua_lock; spinlock_t dev_reservation_lock; - spinlock_t dev_state_lock; spinlock_t dev_status_lock; - spinlock_t dev_status_thr_lock; spinlock_t se_port_lock; spinlock_t se_tmr_lock; spinlock_t qf_cmd_lock; @@ -739,11 +727,8 @@ struct se_device { struct t10_pr_registration *dev_pr_res_holder; struct list_head dev_sep_list; struct list_head dev_tmr_list; - struct timer_list dev_status_timer; /* Pointer to descriptor for processing thread */ struct task_struct *process_thread; - pid_t process_thread_pid; - struct task_struct *dev_mgmt_thread; struct work_struct qf_work_queue; struct list_head delayed_cmd_list; struct list_head execute_task_list; @@ -756,8 +741,6 @@ struct se_device { struct se_subsystem_api *transport; /* Linked list for struct se_hba struct se_device list */ struct list_head dev_list; - /* Linked list for struct se_global->g_se_dev_list */ - struct list_head g_se_dev_list; } ____cacheline_aligned; struct se_hba { @@ -819,7 +802,6 @@ struct se_port { u32 sep_index; struct scsi_port_stats sep_stats; /* Used for ALUA Target Port Groups membership */ - atomic_t sep_tg_pt_gp_active; atomic_t sep_tg_pt_secondary_offline; /* Used for PR ALL_TG_PT=1 */ atomic_t sep_tg_pt_ref_cnt; -- cgit v1.2.3-70-g09d2 From 9649fa1b8764f64c8cc4293e197e14cd46fe7205 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Mon, 28 Nov 2011 12:33:10 +0100 Subject: target/file: walk properly over sg list This patch changes fileio to use for_each_sg() when walking se_task->task_sg memory passed into from loopback LLD struct scsi_cmnd scatterlist memory. This addresses an issue where FILEIO backends with loopback where hitting the following OOPs with mkfs.ext2: |kernel BUG at include/linux/scatterlist.h:97! |invalid opcode: 0000 [#1] PREEMPT SMP |Modules linked in: sd_mod tcm_loop target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs scsi_mod | |Pid: 671, comm: LIO_fileio Not tainted 3.1.0-rc10+ #139 Bochs Bochs |EIP: 0060:[] EFLAGS: 00010202 CPU: 0 |EIP is at fd_do_task+0x396/0x420 [target_core_file] | [] __transport_execute_tasks+0xd4/0x190 [target_core_mod] | [] transport_execute_tasks+0x3c/0xf0 [target_core_mod] |EIP: [] fd_do_task+0x396/0x420 [target_core_file] SS:ESP 0068:dea47e90 Signed-off-by: Sebastian Andrzej Siewior Cc: Christoph Hellwig Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_file.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/target/target_core_file.c b/drivers/target/target_core_file.c index 38211322415e..b4864fba4ef0 100644 --- a/drivers/target/target_core_file.c +++ b/drivers/target/target_core_file.c @@ -289,9 +289,9 @@ static int fd_do_readv(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); @@ -342,9 +342,9 @@ static int fd_do_writev(struct se_task *task) return -ENOMEM; } - for (i = 0; i < task->task_sg_nents; i++) { - iov[i].iov_len = sg[i].length; - iov[i].iov_base = sg_virt(&sg[i]); + for_each_sg(task->task_sg, sg, task->task_sg_nents, i) { + iov[i].iov_len = sg->length; + iov[i].iov_base = sg_virt(sg); } old_fs = get_fs(); -- cgit v1.2.3-70-g09d2 From 6f21475576dde397cd2580262209d4080fbd5458 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 29 Nov 2011 03:29:59 -0500 Subject: target: remove the unused se_dev_list Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_configfs.c | 11 ----------- drivers/target/target_core_device.c | 1 - include/target/target_core_base.h | 1 - 3 files changed, 13 deletions(-) diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index e0c1e8a8dd4e..93d4f6a1b798 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -67,9 +67,6 @@ static struct config_group target_core_hbagroup; static struct config_group alua_group; static struct config_group alua_lu_gps_group; -static DEFINE_SPINLOCK(se_device_lock); -static LIST_HEAD(se_dev_list); - static inline struct se_hba * item_to_hba(struct config_item *item) { @@ -2741,7 +2738,6 @@ static struct config_group *target_core_make_subdev( " struct se_subsystem_dev\n"); goto unlock; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); @@ -2777,9 +2773,6 @@ static struct config_group *target_core_make_subdev( " from allocate_virtdevice()\n"); goto out; } - spin_lock(&se_device_lock); - list_add_tail(&se_dev->se_dev_node, &se_dev_list); - spin_unlock(&se_device_lock); config_group_init_type_name(&se_dev->se_dev_group, name, &target_core_dev_cit); @@ -2874,10 +2867,6 @@ static void target_core_drop_subdev( mutex_lock(&hba->hba_access_mutex); t = hba->transport; - spin_lock(&se_device_lock); - list_del(&se_dev->se_dev_node); - spin_unlock(&se_device_lock); - dev_stat_grp = &se_dev->dev_stat_grps.stat_group; for (i = 0; dev_stat_grp->default_groups[i]; i++) { df_item = &dev_stat_grp->default_groups[i]->cg_item; diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index dd5adb82e3df..e2be1f510da8 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1584,7 +1584,6 @@ int core_dev_setup_virtual_lun0(void) ret = -ENOMEM; goto out; } - INIT_LIST_HEAD(&se_dev->se_dev_node); INIT_LIST_HEAD(&se_dev->t10_wwn.t10_vpd_list); spin_lock_init(&se_dev->t10_wwn.t10_vpd_lock); INIT_LIST_HEAD(&se_dev->t10_pr.registration_list); diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 098a15611aba..6873c7dd9145 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -669,7 +669,6 @@ struct se_subsystem_dev { struct t10_reservation t10_pr; spinlock_t se_dev_lock; void *se_dev_su_ptr; - struct list_head se_dev_node; struct config_group se_dev_group; /* For T10 Reservations */ struct config_group se_dev_pr_group; -- cgit v1.2.3-70-g09d2 From 5bff9e8584fbcdb361dada5a0425724b9e31e608 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 25 Nov 2011 22:18:45 +0100 Subject: target/rd: simplify the page/offset computation Breakout rd_MEMCPY_do_task() usage of do_div() to tmp value during rd_request->rd_page assignment. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6d8a6881cfff..6119ed5a3311 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -583,14 +583,12 @@ static int rd_MEMCPY_do_task(struct se_task *task) { struct se_device *dev = task->task_se_cmd->se_dev; struct rd_request *req = RD_REQ(task); - unsigned long long lba; + u64 tmp; int ret; - req->rd_page = (task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size) / PAGE_SIZE; - lba = task->task_lba; - req->rd_offset = (do_div(lba, - (PAGE_SIZE / dev->se_sub_dev->se_dev_attrib.block_size))) * - dev->se_sub_dev->se_dev_attrib.block_size; + tmp = task->task_lba * dev->se_sub_dev->se_dev_attrib.block_size; + req->rd_offset = do_div(tmp, PAGE_SIZE); + req->rd_page = tmp; req->rd_size = task->task_size; if (task->task_data_direction == DMA_FROM_DEVICE) -- cgit v1.2.3-70-g09d2 From 65b0c78d5a0ca2cb82b7b9f54f855896e0d7fc10 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 30 Nov 2011 10:48:30 +0100 Subject: target/rd: fix or rewrite the copy routine So the code assumes that the sg list is only a array while in reality loopback SGL memory via scsi_cmnd into target-core may be already chained. This patch converts ramdisk code to use sg_miter logic from scatterlist.h in order to properly support passthrough SGL usage with transport_generic_map_mem_to_cmd() via loopback. With this patch the bug goes away. However after umount/mount of the device my files are gone. So something is still not right. After looking at it for a while I decided to rewrite the that part of the code and now things do work for me. For reference: - http://article.gmane.org/gmane.linux.scsi.target.devel/595 the sg_next() conversion - http://article.gmane.org/gmane.linux.scsi.target.devel/602 the rewrite of the copy code (nab: Fix compile warning in rd_MEMCPY) Signed-off-by: Sebastian Andrzej Siewior Cc: stable@kernel.org Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_rd.c | 245 +++++++--------------------------------- 1 file changed, 40 insertions(+), 205 deletions(-) diff --git a/drivers/target/target_core_rd.c b/drivers/target/target_core_rd.c index 6119ed5a3311..02e51faa2f4e 100644 --- a/drivers/target/target_core_rd.c +++ b/drivers/target/target_core_rd.c @@ -343,235 +343,74 @@ static struct rd_dev_sg_table *rd_get_sg_table(struct rd_dev *rd_dev, u32 page) return NULL; } -/* rd_MEMCPY_read(): - * - * - */ -static int rd_MEMCPY_read(struct rd_request *req) +static int rd_MEMCPY(struct rd_request *req, u32 read_rd) { struct se_task *task = &req->rd_task; struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; + struct scatterlist *rd_sg; + struct sg_mapping_iter m; u32 rd_offset = req->rd_offset; + u32 src_len; table = rd_get_sg_table(dev, req->rd_page); if (!table) return -EINVAL; - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = task->task_sg; - sg_s = &table->sg_table[req->rd_page - table->page_start_offset]; + rd_sg = &table->sg_table[req->rd_page - table->page_start_offset]; - pr_debug("RD[%u]: Read LBA: %llu, Size: %u Page: %u, Offset:" - " %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - src_offset = rd_offset; + pr_debug("RD[%u]: %s LBA: %llu, Size: %u Page: %u, Offset: %u\n", + dev->rd_dev_id, read_rd ? "Read" : "Write", + task->task_lba, req->rd_size, req->rd_page, + rd_offset); + src_len = PAGE_SIZE - rd_offset; + sg_miter_start(&m, task->task_sg, task->task_sg_nents, + read_rd ? SG_MITER_TO_SG : SG_MITER_FROM_SG); while (req->rd_size) { - if ((sg_d[i].length - dst_offset) < - (sg_s[j].length - src_offset)) { - length = (sg_d[i].length - dst_offset); - - pr_debug("Step 1 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, j, - sg_s[j].length); - pr_debug("Step 1 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); - - if (length > req->rd_size) - length = req->rd_size; - - dst = sg_virt(&sg_d[i++]) + dst_offset; - BUG_ON(!dst); - - src = sg_virt(&sg_s[j]) + src_offset; - BUG_ON(!src); - - dst_offset = 0; - src_offset = length; - page_end = 0; - } else { - length = (sg_s[j].length - src_offset); - - pr_debug("Step 2 - sg_d[%d]: %p length: %d" - " offset: %u sg_s[%d].length: %u\n", i, - &sg_d[i], sg_d[i].length, sg_d[i].offset, - j, sg_s[j].length); - pr_debug("Step 2 - length: %u dst_offset: %u" - " src_offset: %u\n", length, dst_offset, - src_offset); - - if (length > req->rd_size) - length = req->rd_size; - - dst = sg_virt(&sg_d[i]) + dst_offset; - BUG_ON(!dst); - - if (sg_d[i].length == length) { - i++; - dst_offset = 0; - } else - dst_offset = length; - - src = sg_virt(&sg_s[j++]) + src_offset; - BUG_ON(!src); - - src_offset = 0; - page_end = 1; - } + u32 len; + void *rd_addr; - memcpy(dst, src, length); + sg_miter_next(&m); + len = min((u32)m.length, src_len); + m.consumed = len; - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); + rd_addr = sg_virt(rd_sg) + rd_offset; - req->rd_size -= length; - if (!req->rd_size) - return 0; + if (read_rd) + memcpy(m.addr, rd_addr, len); + else + memcpy(rd_addr, m.addr, len); - if (!page_end) + req->rd_size -= len; + if (!req->rd_size) continue; - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); + src_len -= len; + if (src_len) { + rd_offset += len; continue; } - pr_debug("getting new page table for page: %u\n", - req->rd_page); - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - sg_s = &table->sg_table[j = 0]; - } - - return 0; -} - -/* rd_MEMCPY_write(): - * - * - */ -static int rd_MEMCPY_write(struct rd_request *req) -{ - struct se_task *task = &req->rd_task; - struct rd_dev *dev = req->rd_task.task_se_cmd->se_dev->dev_ptr; - struct rd_dev_sg_table *table; - struct scatterlist *sg_d, *sg_s; - void *dst, *src; - u32 i = 0, j = 0, dst_offset = 0, src_offset = 0; - u32 length, page_end = 0, table_sg_end; - u32 rd_offset = req->rd_offset; - - table = rd_get_sg_table(dev, req->rd_page); - if (!table) - return -EINVAL; - - table_sg_end = (table->page_end_offset - req->rd_page); - sg_d = &table->sg_table[req->rd_page - table->page_start_offset]; - sg_s = task->task_sg; - - pr_debug("RD[%d] Write LBA: %llu, Size: %u, Page: %u," - " Offset: %u\n", dev->rd_dev_id, task->task_lba, req->rd_size, - req->rd_page, req->rd_offset); - - dst_offset = rd_offset; - - while (req->rd_size) { - if ((sg_s[i].length - src_offset) < - (sg_d[j].length - dst_offset)) { - length = (sg_s[i].length - src_offset); - - pr_debug("Step 1 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 1 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i++]) + src_offset; - BUG_ON(!src); - - dst = sg_virt(&sg_d[j]) + dst_offset; - BUG_ON(!dst); - - src_offset = 0; - dst_offset = length; - page_end = 0; - } else { - length = (sg_d[j].length - dst_offset); - - pr_debug("Step 2 - sg_s[%d]: %p length: %d" - " offset: %d sg_d[%d].length: %u\n", i, - &sg_s[i], sg_s[i].length, sg_s[i].offset, - j, sg_d[j].length); - pr_debug("Step 2 - length: %u src_offset: %u" - " dst_offset: %u\n", length, src_offset, - dst_offset); - - if (length > req->rd_size) - length = req->rd_size; - - src = sg_virt(&sg_s[i]) + src_offset; - BUG_ON(!src); - - if (sg_s[i].length == length) { - i++; - src_offset = 0; - } else - src_offset = length; - - dst = sg_virt(&sg_d[j++]) + dst_offset; - BUG_ON(!dst); - - dst_offset = 0; - page_end = 1; - } - - memcpy(dst, src, length); - - pr_debug("page: %u, remaining size: %u, length: %u," - " i: %u, j: %u\n", req->rd_page, - (req->rd_size - length), length, i, j); - - req->rd_size -= length; - if (!req->rd_size) - return 0; - - if (!page_end) - continue; - - if (++req->rd_page <= table->page_end_offset) { - pr_debug("page: %u in same page table\n", - req->rd_page); + /* rd page completed, next one please */ + req->rd_page++; + rd_offset = 0; + src_len = PAGE_SIZE; + if (req->rd_page <= table->page_end_offset) { + rd_sg++; continue; } - pr_debug("getting new page table for page: %u\n", - req->rd_page); - table = rd_get_sg_table(dev, req->rd_page); - if (!table) + if (!table) { + sg_miter_stop(&m); return -EINVAL; + } - sg_d = &table->sg_table[j = 0]; + /* since we increment, the first sg entry is correct */ + rd_sg = table->sg_table; } - + sg_miter_stop(&m); return 0; } @@ -591,11 +430,7 @@ static int rd_MEMCPY_do_task(struct se_task *task) req->rd_page = tmp; req->rd_size = task->task_size; - if (task->task_data_direction == DMA_FROM_DEVICE) - ret = rd_MEMCPY_read(req); - else - ret = rd_MEMCPY_write(req); - + ret = rd_MEMCPY(req, task->task_data_direction == DMA_FROM_DEVICE); if (ret != 0) return ret; -- cgit v1.2.3-70-g09d2 From c638830d040696ff2bae07785fd4277e7e3fe7c4 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Wed, 30 Nov 2011 12:11:50 -0800 Subject: target: Don't return an error if disabling unsupported features If an attribute is present (but not yet supported) it should be OK to write 0 (a no-op) to the attribute. This is an issue because userspace should be able to save and restore all set attribute values without error. Signed-off-by: Andy Grover Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index e2be1f510da8..9b8639425472 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -954,8 +954,12 @@ int se_dev_set_emulate_dpo(struct se_device *dev, int flag) return -EINVAL; } - pr_err("dpo_emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("dpo_emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) @@ -965,7 +969,7 @@ int se_dev_set_emulate_fua_write(struct se_device *dev, int flag) return -EINVAL; } - if (dev->transport->fua_write_emulated == 0) { + if (flag && dev->transport->fua_write_emulated == 0) { pr_err("fua_write_emulated not supported\n"); return -EINVAL; } @@ -982,8 +986,12 @@ int se_dev_set_emulate_fua_read(struct se_device *dev, int flag) return -EINVAL; } - pr_err("ua read emulated not supported\n"); - return -EINVAL; + if (flag) { + pr_err("ua read emulated not supported\n"); + return -EINVAL; + } + + return 0; } int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) @@ -992,7 +1000,7 @@ int se_dev_set_emulate_write_cache(struct se_device *dev, int flag) pr_err("Illegal value %d\n", flag); return -EINVAL; } - if (dev->transport->write_cache_emulated == 0) { + if (flag && dev->transport->write_cache_emulated == 0) { pr_err("write_cache_emulated not supported\n"); return -EINVAL; } @@ -1053,7 +1061,7 @@ int se_dev_set_emulate_tpu(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } @@ -1074,7 +1082,7 @@ int se_dev_set_emulate_tpws(struct se_device *dev, int flag) * We expect this value to be non-zero when generic Block Layer * Discard supported is detected iblock_create_virtdevice(). */ - if (!dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { + if (flag && !dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { pr_err("Generic Block Discard not supported\n"); return -ENOSYS; } -- cgit v1.2.3-70-g09d2 From ddca8f3ed36c5d25363dab6762829868af09cb02 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Tue, 6 Dec 2011 05:24:19 +0000 Subject: iscsi-target: Fix hex2bin warn_unused compile message MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning with hex2bin() usage: drivers/target/iscsi/iscsi_target_auth.c: In function ‘chap_string_to_hex’: drivers/target/iscsi/iscsi_target_auth.c:35: warning: ignoring return value of ‘hex2bin’, declared with attribute warn_unused_result Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_auth.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_auth.c b/drivers/target/iscsi/iscsi_target_auth.c index beb39469e7f1..1cd6ce373b83 100644 --- a/drivers/target/iscsi/iscsi_target_auth.c +++ b/drivers/target/iscsi/iscsi_target_auth.c @@ -30,9 +30,11 @@ static int chap_string_to_hex(unsigned char *dst, unsigned char *src, int len) { - int j = DIV_ROUND_UP(len, 2); + int j = DIV_ROUND_UP(len, 2), rc; - hex2bin(dst, src, j); + rc = hex2bin(dst, src, j); + if (rc < 0) + pr_debug("CHAP string contains non hex digit symbols\n"); dst[j] = '\0'; return j; -- cgit v1.2.3-70-g09d2 From 75fc2d3797c47f5f70ca71c41c342c352845cd06 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 5 Dec 2011 17:27:08 +0100 Subject: MAINTAINERS: Update tip.git related git trees Update the six major subsystem trees hosted in the tip tree to the new location (or add the location if it was missing). Acked-by: Thomas Gleixner Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/n/tip-w0z98as3kwy9bo1o3k2mmuvi@git.kernel.org Signed-off-by: Ingo Molnar --- MAINTAINERS | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 447560284996..9706a21edcbd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3118,6 +3118,7 @@ F: include/linux/hid* HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS M: Thomas Gleixner +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core S: Maintained F: Documentation/timers/ F: kernel/hrtimer.c @@ -3627,7 +3628,7 @@ F: net/irda/ IRQ SUBSYSTEM M: Thomas Gleixner S: Maintained -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core F: kernel/irq/ ISAPNP @@ -4115,7 +4116,7 @@ F: drivers/hwmon/lm90.c LOCKDEP AND LOCKSTAT M: Peter Zijlstra M: Ingo Molnar -T: git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking S: Maintained F: Documentation/lockdep*.txt F: Documentation/lockstat.txt @@ -5102,6 +5103,7 @@ M: Peter Zijlstra M: Paul Mackerras M: Ingo Molnar M: Arnaldo Carvalho de Melo +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core S: Supported F: kernel/events/* F: include/linux/perf_event.h @@ -5181,6 +5183,7 @@ F: drivers/scsi/pm8001/ POSIX CLOCKS and TIMERS M: Thomas Gleixner +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core S: Supported F: fs/timerfd.c F: include/linux/timer* @@ -5696,6 +5699,7 @@ F: drivers/dma/dw_dmac.c TIMEKEEPING, NTP M: John Stultz M: Thomas Gleixner +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core S: Supported F: include/linux/clocksource.h F: include/linux/time.h @@ -5720,6 +5724,7 @@ F: drivers/watchdog/sc1200wdt.c SCHEDULER M: Ingo Molnar M: Peter Zijlstra +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core S: Maintained F: kernel/sched* F: include/linux/sched.h @@ -6647,7 +6652,7 @@ TRACING M: Steven Rostedt M: Frederic Weisbecker M: Ingo Molnar -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core S: Maintained F: Documentation/trace/ftrace.txt F: arch/*/*/*/ftrace.h @@ -7397,7 +7402,7 @@ M: Thomas Gleixner M: Ingo Molnar M: "H. Peter Anvin" M: x86@kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core S: Maintained F: Documentation/x86/ F: arch/x86/ -- cgit v1.2.3-70-g09d2 From cefcc03ffc9527dde56807339edb1719c8dbae5f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 5 Dec 2011 20:50:45 +0000 Subject: ASoC: Provide a more complete DMA driver stub Allow userspace applications to do more parameter setting by providing a more complete stub DMA driver specifying a wildcard set of formats and channels and essentially random values for the DMA parameters. This is required for useful runtime operation of the dummy DMA driver until we are able to figure out how to power up links and do hw_params() from DAPM. Sending to stable as without this the dummy driver is not terribly useful. Reported-by: Kyung-Kwee Ryu Tested-by: Kyung-Kwee Ryu Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/soc-utils.c | 31 ++++++++++++++++++++++++++++++- 1 file changed, 30 insertions(+), 1 deletion(-) diff --git a/sound/soc/soc-utils.c b/sound/soc/soc-utils.c index 0c12b98484bd..4220bb0f2730 100644 --- a/sound/soc/soc-utils.c +++ b/sound/soc/soc-utils.c @@ -58,7 +58,36 @@ int snd_soc_params_to_bclk(struct snd_pcm_hw_params *params) } EXPORT_SYMBOL_GPL(snd_soc_params_to_bclk); -static struct snd_soc_platform_driver dummy_platform; +static const struct snd_pcm_hardware dummy_dma_hardware = { + .formats = 0xffffffff, + .channels_min = 1, + .channels_max = UINT_MAX, + + /* Random values to keep userspace happy when checking constraints */ + .info = SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BLOCK_TRANSFER, + .buffer_bytes_max = 128*1024, + .period_bytes_min = PAGE_SIZE, + .period_bytes_max = PAGE_SIZE*2, + .periods_min = 2, + .periods_max = 128, +}; + +static int dummy_dma_open(struct snd_pcm_substream *substream) +{ + snd_soc_set_runtime_hwparams(substream, &dummy_dma_hardware); + + return 0; +} + +static struct snd_pcm_ops dummy_dma_ops = { + .open = dummy_dma_open, + .ioctl = snd_pcm_lib_ioctl, +}; + +static struct snd_soc_platform_driver dummy_platform = { + .ops = &dummy_dma_ops, +}; static __devinit int snd_soc_dummy_probe(struct platform_device *pdev) { -- cgit v1.2.3-70-g09d2 From 96f176a310e447966e45112fe4511b9d9fa0caf4 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Tue, 6 Dec 2011 11:17:34 +0100 Subject: iommu/msm: Fix compile error in mach-msm/devices-iommu.c Fix compile error due to missing include. Signed-off-by: Joerg Roedel --- arch/arm/mach-msm/devices-iommu.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-msm/devices-iommu.c b/arch/arm/mach-msm/devices-iommu.c index 24030d0da6e3..0fb7a17df398 100644 --- a/arch/arm/mach-msm/devices-iommu.c +++ b/arch/arm/mach-msm/devices-iommu.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From dd13752537d36cc6c145cb040f71ce7acda31e6e Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 5 Dec 2011 23:14:39 +0000 Subject: x86/intel_mid: Fix the Kconfig for MID selection We currently fail to build on CONFIG_X86_INTEL_MID=y and CONFIG_X86_MRST unset. We could build all the bits to make generic MID work if you picked MID platform alone but that's really silly. Instead use select and two variables. This looks a bit daft right now but once we add a Medfield selection it'll start to look a good deal more sensible. Reported-by: Ingo Molnar Reported-by: Stanislaw Gruszka Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111205231433.28811.51297.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cb9a1044a771..5553f9f1a70d 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -390,7 +390,7 @@ config X86_INTEL_CE This option compiles in support for the CE4100 SOC for settop boxes and media devices. -config X86_INTEL_MID +config X86_WANT_INTEL_MID bool "Intel MID platform support" depends on X86_32 depends on X86_EXTENDED_PLATFORM @@ -399,7 +399,7 @@ config X86_INTEL_MID systems which do not have the PCI legacy interfaces (Moorestown, Medfield). If you are building for a PC class system say N here. -if X86_INTEL_MID +if X86_WANT_INTEL_MID config X86_MRST bool "Moorestown MID platform" @@ -411,6 +411,7 @@ config X86_MRST select SPI select INTEL_SCU_IPC select X86_PLATFORM_DEVICES + select X86_INTEL_MID ---help--- Moorestown is Intel's Low Power Intel Architecture (LPIA) based Moblin Internet Device(MID) platform. Moorestown consists of two chips: -- cgit v1.2.3-70-g09d2 From d68fb11c3dae75c8331538dcf083a65e697cc034 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:16:06 +0100 Subject: ptp: Fix clock_getres() implementation The clock_getres() function must return the resolution in the timespec argument and return 0 for success. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org Cc: Richard Cochran --- drivers/ptp/ptp_clock.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/ptp/ptp_clock.c b/drivers/ptp/ptp_clock.c index cf3f9997546d..10451a15e828 100644 --- a/drivers/ptp/ptp_clock.c +++ b/drivers/ptp/ptp_clock.c @@ -101,7 +101,9 @@ static s32 scaled_ppm_to_ppb(long ppm) static int ptp_clock_getres(struct posix_clock *pc, struct timespec *tp) { - return 1; /* always round timer functions to one nanosecond */ + tp->tv_sec = 0; + tp->tv_nsec = 1; + return 0; } static int ptp_clock_settime(struct posix_clock *pc, const struct timespec *tp) -- cgit v1.2.3-70-g09d2 From c9c024b3f3e07d087974db4c0dc46217fff3a6c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 5 Dec 2011 21:20:23 +0100 Subject: alarmtimers: Fix time comparison The expiry function compares the timer against current time and does not expire the timer when the expiry time is >= now. That's wrong. If the timer is set for now, then it must expire. Make the condition expiry > now for breaking out the loop. Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: stable@kernel.org --- kernel/time/alarmtimer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index c436e790b21b..8a46f5d64504 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -195,7 +195,7 @@ static enum hrtimer_restart alarmtimer_fired(struct hrtimer *timer) struct alarm *alarm; ktime_t expired = next->expires; - if (expired.tv64 >= now.tv64) + if (expired.tv64 > now.tv64) break; alarm = container_of(next, struct alarm, node); -- cgit v1.2.3-70-g09d2 From 68bfcafaaeebdf23fba0edb4e0964bef7d08f92a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Dec 2011 15:19:00 +0800 Subject: ASoC: Include linux/io.h for jz4740 codec Include linux/io.h to fix below build errors: CC sound/soc/codecs/jz4740.o sound/soc/codecs/jz4740.c: In function 'jz4740_codec_read': sound/soc/codecs/jz4740.c:82: error: implicit declaration of function 'readl' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_write': sound/soc/codecs/jz4740.c:92: error: implicit declaration of function 'writel' sound/soc/codecs/jz4740.c: In function 'jz4740_codec_probe': sound/soc/codecs/jz4740.c:373: error: implicit declaration of function 'ioremap' sound/soc/codecs/jz4740.c:373: warning: assignment makes pointer from integer without a cast sound/soc/codecs/jz4740.c:393: error: implicit declaration of function 'iounmap' make[3]: *** [sound/soc/codecs/jz4740.o] Error 1 make[2]: *** [sound/soc/codecs] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/jz4740.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c index e373f8f06907..3e1f4e172bfb 100644 --- a/sound/soc/codecs/jz4740.c +++ b/sound/soc/codecs/jz4740.c @@ -15,6 +15,7 @@ #include #include #include +#include #include -- cgit v1.2.3-70-g09d2 From f8f626f537aee0da878d287e0d7694b7b76d599a Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 6 Dec 2011 15:38:51 +0800 Subject: ASoC: Fix build dependency for SND_SOC_JZ4740_CODEC Currently SND_SOC_JZ4740_CODEC depends on SOC_JZ4740 but SOC_JZ4740 is not defined in any Kconfig. Thus the codec driver will not be built when select "Build all ASoC CODEC drivers". (Unless it is selected by SND_JZ4740_SOC_QI_LB60). Remove the dependency with SOC_JZ4740, then this code driver can be built when select "Build all ASoC CODEC drivers". Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Mark Brown --- sound/soc/codecs/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 4584514d93d4..fa787d45d74a 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -33,7 +33,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_CX20442 select SND_SOC_DA7210 if I2C select SND_SOC_DFBMCS320 - select SND_SOC_JZ4740_CODEC if SOC_JZ4740 + select SND_SOC_JZ4740_CODEC select SND_SOC_LM4857 if I2C select SND_SOC_MAX98088 if I2C select SND_SOC_MAX98095 if I2C -- cgit v1.2.3-70-g09d2 From 974c07249b06d948154be3275bf4f6e55b585300 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Fri, 2 Dec 2011 23:09:42 +0100 Subject: ARM: 7186/1: fix Kconfig issue with PHYS_OFFSET and !MMU MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 1b9f95f8ade9 (ARM: prepare for removal of a bunch of files) introduced CONFIG_PHYS_OFFSET but the Kconfig hex prompt did not provide a default value. This has the undesired side effect of breaking a reportedly used trick for updating defconfigs on the fly for routine buildtesting across all arch and all platforms, i.e. cp /path/to/somedefconfig .config ; yes "" | make oldconfig because the config system will endlessly loop until a valid address is provided. However we can't just pick a random default value since it is likely to be wrong for the majority of the boards as the right answer for this option is quite varied. So the fact that the config system insists on having a proper value be entered is actually a good thing. It turns out that only at91x40_defconfig has this problem because it has CONFIG_MMU=n. However, in the !MMU case, there is already a CONFIG_DRAM_BASE value that can be used here. So let's use that as a default in that case and suppress the redundant CONFIG_PHYS_OFFSET prompt. Eventually the DRAM_BASE config option could simply be replaced by PHYS_OFFSET directly, but that's a larger change better suited for later. Reported-by: Paul Gortmaker Signed-off-by: Nicolas Pitre Acked-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e084b7e981e8..776d76b8cb69 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H be avoided when possible. config PHYS_OFFSET - hex "Physical address of main memory" + hex "Physical address of main memory" if MMU depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + default DRAM_BASE if !MMU help Please provide the physical address corresponding to the location of main memory in your system. -- cgit v1.2.3-70-g09d2 From de66a979012dbc66b1ec0125795a3f79ee667b8a Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Mon, 5 Dec 2011 09:39:59 +0100 Subject: ARM: 7187/1: fix unwinding for XIP kernels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The linker places the unwind tables in readonly sections. So when using an XIP kernel these are located in ROM and cannot be modified. For that reason the current approach to convert the relative offsets in the unwind index to absolute addresses early in the boot process doesn't work with XIP. The offsets in the unwind index section are signed 31 bit numbers and the structs are sorted by this offset. So it first has offsets between 0x40000000 and 0x7fffffff (i.e. the negative offsets) and then offsets between 0x00000000 and 0x3fffffff. When seperating these two blocks the numbers are sorted even when interpreting the offsets as unsigned longs. So determine the first non-negative entry once and track that using the new origin pointer. The actual bisection can then use a plain unsigned long comparison. The only thing that makes the new bisection more complicated is that the offsets are relative to their position in the index section, so the key to search needs to be adapted accordingly in each step. Moreover several consts are added to catch future writes and rename the member "addr" of struct unwind_idx to "addr_offset" to better match the new semantic. (This has the additional benefit of breaking eventual users at compile time to make them aware of the change.) In my tests the new algorithm was a tad faster than the original and has the additional upside of not needing the initial conversion and so saves some boot time and it's possible to unwind even earlier. Acked-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King --- arch/arm/include/asm/unwind.h | 16 ++---- arch/arm/kernel/setup.c | 2 - arch/arm/kernel/unwind.c | 129 +++++++++++++++++++++++++++--------------- 3 files changed, 88 insertions(+), 59 deletions(-) diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h index a5edf421005c..d1c3f3a71c94 100644 --- a/arch/arm/include/asm/unwind.h +++ b/arch/arm/include/asm/unwind.h @@ -30,14 +30,15 @@ enum unwind_reason_code { }; struct unwind_idx { - unsigned long addr; + unsigned long addr_offset; unsigned long insn; }; struct unwind_table { struct list_head list; - struct unwind_idx *start; - struct unwind_idx *stop; + const struct unwind_idx *start; + const struct unwind_idx *origin; + const struct unwind_idx *stop; unsigned long begin_addr; unsigned long end_addr; }; @@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start, extern void unwind_table_del(struct unwind_table *tab); extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk); -#ifdef CONFIG_ARM_UNWIND -extern int __init unwind_init(void); -#else -static inline int __init unwind_init(void) -{ - return 0; -} -#endif - #endif /* !__ASSEMBLY__ */ #ifdef CONFIG_ARM_UNWIND diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 3448a3f9cc8c..1bdd0adbb7dd 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; - unwind_init(); - setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e7e8365795c3..3f03fe0c3269 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2); struct unwind_ctrl_block { unsigned long vrs[16]; /* virtual register set */ - unsigned long *insn; /* pointer to the current instructions word */ + const unsigned long *insn; /* pointer to the current instructions word */ int entries; /* number of entries left to interpret */ int byte; /* current byte number in the instructions word */ }; @@ -83,8 +83,9 @@ enum regs { PC = 15 }; -extern struct unwind_idx __start_unwind_idx[]; -extern struct unwind_idx __stop_unwind_idx[]; +extern const struct unwind_idx __start_unwind_idx[]; +static const struct unwind_idx *__origin_unwind_idx; +extern const struct unwind_idx __stop_unwind_idx[]; static DEFINE_SPINLOCK(unwind_lock); static LIST_HEAD(unwind_tables); @@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables); }) /* - * Binary search in the unwind index. The entries entries are + * Binary search in the unwind index. The entries are * guaranteed to be sorted in ascending order by the linker. + * + * start = first entry + * origin = first entry with positive offset (or stop if there is no such entry) + * stop - 1 = last entry */ -static struct unwind_idx *search_index(unsigned long addr, - struct unwind_idx *first, - struct unwind_idx *last) +static const struct unwind_idx *search_index(unsigned long addr, + const struct unwind_idx *start, + const struct unwind_idx *origin, + const struct unwind_idx *stop) { - pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last); + unsigned long addr_prel31; + + pr_debug("%s(%08lx, %p, %p, %p)\n", + __func__, addr, start, origin, stop); + + /* + * only search in the section with the matching sign. This way the + * prel31 numbers can be compared as unsigned longs. + */ + if (addr < (unsigned long)start) + /* negative offsets: [start; origin) */ + stop = origin; + else + /* positive offsets: [origin; stop) */ + start = origin; + + /* prel31 for address relavive to start */ + addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff; - if (addr < first->addr) { + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); + + /* + * As addr_prel31 is relative to start an offset is needed to + * make it relative to mid. + */ + if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) < + mid->addr_offset) + stop = mid; + else { + /* keep addr_prel31 relative to start */ + addr_prel31 -= ((unsigned long)mid - + (unsigned long)start); + start = mid; + } + } + + if (likely(start->addr_offset <= addr_prel31)) + return start; + else { pr_warning("unwind: Unknown symbol address %08lx\n", addr); return NULL; - } else if (addr >= last->addr) - return last; + } +} - while (first < last - 1) { - struct unwind_idx *mid = first + ((last - first + 1) >> 1); +static const struct unwind_idx *unwind_find_origin( + const struct unwind_idx *start, const struct unwind_idx *stop) +{ + pr_debug("%s(%p, %p)\n", __func__, start, stop); + while (start < stop - 1) { + const struct unwind_idx *mid = start + ((stop - start) >> 1); - if (addr < mid->addr) - last = mid; + if (mid->addr_offset >= 0x40000000) + /* negative offset */ + start = mid; else - first = mid; + /* positive offset */ + stop = mid; } - - return first; + pr_debug("%s -> %p\n", __func__, stop); + return stop; } -static struct unwind_idx *unwind_find_idx(unsigned long addr) +static const struct unwind_idx *unwind_find_idx(unsigned long addr) { - struct unwind_idx *idx = NULL; + const struct unwind_idx *idx = NULL; unsigned long flags; pr_debug("%s(%08lx)\n", __func__, addr); - if (core_kernel_text(addr)) + if (core_kernel_text(addr)) { + if (unlikely(!__origin_unwind_idx)) + __origin_unwind_idx = + unwind_find_origin(__start_unwind_idx, + __stop_unwind_idx); + /* main unwind table */ idx = search_index(addr, __start_unwind_idx, - __stop_unwind_idx - 1); - else { + __origin_unwind_idx, + __stop_unwind_idx); + } else { /* module unwind tables */ struct unwind_table *table; @@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr) if (addr >= table->begin_addr && addr < table->end_addr) { idx = search_index(addr, table->start, - table->stop - 1); + table->origin, + table->stop); /* Move-to-front to exploit common traces */ list_move(&table->list, &unwind_tables); break; @@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl) int unwind_frame(struct stackframe *frame) { unsigned long high, low; - struct unwind_idx *idx; + const struct unwind_idx *idx; struct unwind_ctrl_block ctrl; /* only go to a higher address on the stack */ @@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, unsigned long text_size) { unsigned long flags; - struct unwind_idx *idx; struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL); pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size, @@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size, if (!tab) return tab; - tab->start = (struct unwind_idx *)start; - tab->stop = (struct unwind_idx *)(start + size); + tab->start = (const struct unwind_idx *)start; + tab->stop = (const struct unwind_idx *)(start + size); + tab->origin = unwind_find_origin(tab->start, tab->stop); tab->begin_addr = text_addr; tab->end_addr = text_addr + text_size; - /* Convert the symbol addresses to absolute values */ - for (idx = tab->start; idx < tab->stop; idx++) - idx->addr = prel31_to_addr(&idx->addr); - spin_lock_irqsave(&unwind_lock, flags); list_add_tail(&tab->list, &unwind_tables); spin_unlock_irqrestore(&unwind_lock, flags); @@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab) kfree(tab); } - -int __init unwind_init(void) -{ - struct unwind_idx *idx; - - /* Convert the symbol addresses to absolute values */ - for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++) - idx->addr = prel31_to_addr(&idx->addr); - - pr_debug("unwind: ARM stack unwinding initialised\n"); - - return 0; -} -- cgit v1.2.3-70-g09d2 From 6340cfed48c478cf67451ddcd2daa3438e642632 Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Mon, 28 Nov 2011 12:03:29 +0300 Subject: perf header: Use event_name() to get an event name perf_evsel.name may be not initialized Cc: David Ahern Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Arun Sharma Cc: devel@openvz.org Link: http://lkml.kernel.org/r/1322471015-107825-2-git-send-email-avagin@openvz.org Signed-off-by: Andrew Vagin Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/header.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index bcd05d05b4f0..33c17a2b2a81 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -388,7 +388,7 @@ static int write_event_desc(int fd, struct perf_header *h __used, /* * write event string as passed on cmdline */ - ret = do_write_string(fd, attr->name); + ret = do_write_string(fd, event_name(attr)); if (ret < 0) return ret; /* -- cgit v1.2.3-70-g09d2 From f1a73746c6664442082e3d53e1804f46e1910436 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Sun, 4 Dec 2011 13:44:06 +0100 Subject: ALSA: hda - Fix GPIO LED setup for IDT 92HD75 codecs Some HP laptops with IDT 92HD75 codecs may use a GPIO > 4 for the mute LED, but currently the driver doesn't check this properly, and confuses the mute LED behavior. This ended up with the silent output on some HP laptops due to having another GPIO used as external amp control. This patch fixes the problem by checking the max GPIO count and comparing with the given value from DMI entry instead of magic fixed value 4 and 8, and adding a new field to indicate the VREF mute-LED behavior. Reported-and-tested-by: Vitaliy Kulikov Cc: [v3.1] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 45 ++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 21 deletions(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index f3658658548e..e035cf6de278 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -215,6 +215,7 @@ struct sigmatel_spec { unsigned int gpio_mute; unsigned int gpio_led; unsigned int gpio_led_polarity; + unsigned int vref_mute_led_nid; /* pin NID for mute-LED vref control */ unsigned int vref_led; /* stream */ @@ -4318,12 +4319,10 @@ static void stac_store_hints(struct hda_codec *codec) spec->eapd_switch = val; get_int_hint(codec, "gpio_led_polarity", &spec->gpio_led_polarity); if (get_int_hint(codec, "gpio_led", &spec->gpio_led)) { - if (spec->gpio_led <= 8) { - spec->gpio_mask |= spec->gpio_led; - spec->gpio_dir |= spec->gpio_led; - if (spec->gpio_led_polarity) - spec->gpio_data |= spec->gpio_led; - } + spec->gpio_mask |= spec->gpio_led; + spec->gpio_dir |= spec->gpio_led; + if (spec->gpio_led_polarity) + spec->gpio_data |= spec->gpio_led; } } @@ -4913,8 +4912,14 @@ static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity) if (sscanf(dev->name, "HP_Mute_LED_%d_%x", &spec->gpio_led_polarity, &spec->gpio_led) == 2) { - if (spec->gpio_led < 4) + unsigned int max_gpio; + max_gpio = snd_hda_param_read(codec, codec->afg, + AC_PAR_GPIO_CAP); + max_gpio &= AC_GPIO_IO_COUNT; + if (spec->gpio_led < max_gpio) spec->gpio_led = 1 << spec->gpio_led; + else + spec->vref_mute_led_nid = spec->gpio_led; return 1; } if (sscanf(dev->name, "HP_Mute_LED_%d", @@ -5043,15 +5048,12 @@ static int stac92xx_pre_resume(struct hda_codec *codec) struct sigmatel_spec *spec = codec->spec; /* sync mute LED */ - if (spec->gpio_led) { - if (spec->gpio_led <= 8) { - stac_gpio_set(codec, spec->gpio_mask, - spec->gpio_dir, spec->gpio_data); - } else { - stac_vrefout_set(codec, - spec->gpio_led, spec->vref_led); - } - } + if (spec->vref_mute_led_nid) + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); + else if (spec->gpio_led) + stac_gpio_set(codec, spec->gpio_mask, + spec->gpio_dir, spec->gpio_data); return 0; } @@ -5076,7 +5078,7 @@ static void stac92xx_set_power_state(struct hda_codec *codec, hda_nid_t fg, struct sigmatel_spec *spec = codec->spec; if (power_state == AC_PWRST_D3) { - if (spec->gpio_led > 8) { + if (spec->vref_mute_led_nid) { /* with vref-out pin used for mute led control * codec AFG is prevented from D3 state */ @@ -5129,7 +5131,7 @@ static int stac92xx_update_led_status(struct hda_codec *codec) } } /*polarity defines *not* muted state level*/ - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { if (muted) spec->gpio_data &= ~spec->gpio_led; /* orange */ else @@ -5147,7 +5149,8 @@ static int stac92xx_update_led_status(struct hda_codec *codec) muted_lvl = spec->gpio_led_polarity ? AC_PINCTL_VREF_GRD : AC_PINCTL_VREF_HIZ; spec->vref_led = muted ? muted_lvl : notmtd_lvl; - stac_vrefout_set(codec, spec->gpio_led, spec->vref_led); + stac_vrefout_set(codec, spec->vref_mute_led_nid, + spec->vref_led); } return 0; } @@ -5661,7 +5664,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; @@ -5976,7 +5979,7 @@ again: #ifdef CONFIG_SND_HDA_POWER_SAVE if (spec->gpio_led) { - if (spec->gpio_led <= 8) { + if (!spec->vref_mute_led_nid) { spec->gpio_mask |= spec->gpio_led; spec->gpio_dir |= spec->gpio_led; spec->gpio_data |= spec->gpio_led; -- cgit v1.2.3-70-g09d2 From a020428364485751b607105c8f5a608f9b1fd38b Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 6 Dec 2011 13:17:23 +0100 Subject: ALSA: hda - Fix remaining VREF mute-LED NID check in post-3.1 changes Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index ea1f157ca38b..eeb25d529e30 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4442,7 +4442,7 @@ static int stac92xx_init(struct hda_codec *codec) /* power on when no jack detection is available */ /* or when the VREF is used for controlling LED */ if (!spec->hp_detect || - (spec->gpio_led > 8 && spec->gpio_led == nid)) { + spec->vref_mute_led_nid == nid) { stac_toggle_power_map(codec, nid, 1); continue; } -- cgit v1.2.3-70-g09d2 From 6bd054096dce061560cee0e016e292e588dc438f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 2 Dec 2011 18:16:01 +0100 Subject: ARM: 7185/1: perf: don't assign platform_device on unsupported CPUs In the unlikely case that a platform registers a PMU platform_device when running on a CPU that is unsupported by perf, we will encounter a NULL dereference when trying to assign the platform_device to the cpu_pmu structure. This patch checks that the CPU is supported by perf before assigning the platform_device. Reported-by: Pawel Moll Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/perf_event.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 8e9c98edc068..88b0941ce51e 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -640,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = { static int __devinit armpmu_device_probe(struct platform_device *pdev) { + if (!cpu_pmu) + return -ENODEV; + cpu_pmu->plat_device = pdev; return 0; } -- cgit v1.2.3-70-g09d2 From 4e2b1c4f56227c742bbd2ea8e8f559567eb80c3f Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 6 Dec 2011 13:28:22 +0000 Subject: x86/intel_mid: Kconfig select fix If we select a symbol it should have a type declared first otherwise in some situations the config tools get upset. They are currently perhaps a bit too resilient which is why this wasn't noticed initially. Signed-off-by: Alan Cox Link: http://lkml.kernel.org/r/20111206132811.4041.32549.stgit@bob.linux.org.uk Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 5553f9f1a70d..efb42949cc09 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -401,6 +401,9 @@ config X86_WANT_INTEL_MID if X86_WANT_INTEL_MID +config X86_INTEL_MID + bool + config X86_MRST bool "Moorestown MID platform" depends on PCI -- cgit v1.2.3-70-g09d2 From 89e0b9a3fd66d72f2d7b7f2d6d86fa56997cde27 Mon Sep 17 00:00:00 2001 From: Sedat Dilek Date: Mon, 5 Dec 2011 23:08:32 +0100 Subject: iommu/amd: Fix typo in kernel-parameters.txt Signed-off-by: Sedat Dilek Signed-off-by: Joerg Roedel --- Documentation/kernel-parameters.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a0c5c5f4fce6..da5037766eed 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -320,7 +320,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. on: enable for both 32- and 64-bit processes off: disable for both 32- and 64-bit processes - amd_iommu= [HW,X86-84] + amd_iommu= [HW,X86-64] Pass parameters to the AMD IOMMU driver in the system. Possible values are: fullflush - enable flushing of IO/TLB entries when -- cgit v1.2.3-70-g09d2 From c29f7d457ac63311feb11928a866efd2fe153d74 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 30 Nov 2011 08:58:18 +0000 Subject: xfs: fix nfs export of 64-bit inodes numbers on 32-bit kernels The i_ino field in the VFS inode is of type unsigned long and thus can't hold the full 64-bit inode number on 32-bit kernels. We have the full inode number in the XFS inode, so use that one for nfs exports. Note that I've also switched the 32-bit file handles types to it, just to make the code more consistent and copy & paste errors less likely to happen. Reported-by: Guoquan Yang Reported-by: Hank Peng Signed-off-by: Christoph Hellwig Signed-off-by: Ben Myers --- fs/xfs/xfs_export.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/xfs/xfs_export.c b/fs/xfs/xfs_export.c index da108977b21f..558910f5e3c0 100644 --- a/fs/xfs/xfs_export.c +++ b/fs/xfs/xfs_export.c @@ -98,22 +98,22 @@ xfs_fs_encode_fh( switch (fileid_type) { case FILEID_INO32_GEN_PARENT: spin_lock(&dentry->d_lock); - fid->i32.parent_ino = dentry->d_parent->d_inode->i_ino; + fid->i32.parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid->i32.parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN: - fid->i32.ino = inode->i_ino; + fid->i32.ino = XFS_I(inode)->i_ino; fid->i32.gen = inode->i_generation; break; case FILEID_INO32_GEN_PARENT | XFS_FILEID_TYPE_64FLAG: spin_lock(&dentry->d_lock); - fid64->parent_ino = dentry->d_parent->d_inode->i_ino; + fid64->parent_ino = XFS_I(dentry->d_parent->d_inode)->i_ino; fid64->parent_gen = dentry->d_parent->d_inode->i_generation; spin_unlock(&dentry->d_lock); /*FALLTHRU*/ case FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG: - fid64->ino = inode->i_ino; + fid64->ino = XFS_I(inode)->i_ino; fid64->gen = inode->i_generation; break; } -- cgit v1.2.3-70-g09d2 From a33caeb118198286309859f014c0662f3ed54ed4 Mon Sep 17 00:00:00 2001 From: Yong Zhang Date: Wed, 9 Nov 2011 16:04:51 +0800 Subject: lockdep, kmemcheck: Annotate ->lock in lockdep_init_map() Since commit f59de89 ("lockdep: Clear whole lockdep_map on initialization"), lockdep_init_map() will clear all the struct. But it will break lock_set_class()/lock_set_subclass(). A typical race condition is like below: CPU A CPU B lock_set_subclass(lockA); lock_set_class(lockA); lockdep_init_map(lockA); /* lockA->name is cleared */ memset(lockA); __lock_acquire(lockA); /* lockA->class_cache[] is cleared */ register_lock_class(lockA); look_up_lock_class(lockA); WARN_ON_ONCE(class->name != lock->name); lock->name = name; So restore to what we have done before commit f59de89 but annotate ->lock with kmemcheck_mark_initialized() to suppress the kmemcheck warning reported in commit f59de89. Reported-by: Sergey Senozhatsky Reported-by: Borislav Petkov Suggested-by: Vegard Nossum Signed-off-by: Yong Zhang Cc: Tejun Heo Cc: David Rientjes Cc: Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111109080451.GB8124@zhy Signed-off-by: Ingo Molnar --- kernel/lockdep.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/kernel/lockdep.c b/kernel/lockdep.c index e69434b070da..b2e08c932d91 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -44,6 +44,7 @@ #include #include #include +#include #include @@ -2948,7 +2949,12 @@ static int mark_lock(struct task_struct *curr, struct held_lock *this, void lockdep_init_map(struct lockdep_map *lock, const char *name, struct lock_class_key *key, int subclass) { - memset(lock, 0, sizeof(*lock)); + int i; + + kmemcheck_mark_initialized(lock, sizeof(*lock)); + + for (i = 0; i < NR_LOCKDEP_CACHING_CLASSES; i++) + lock->class_cache[i] = NULL; #ifdef CONFIG_LOCK_STAT lock->cpu = raw_smp_processor_id(); -- cgit v1.2.3-70-g09d2 From 4af3ce0de0c12e5c17811eaefad36ab8e146c0fd Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 6 Dec 2011 10:47:37 -0800 Subject: IB/mlx4: Fix shutdown crash accessing a non-existent bitmap Commit cfcde11c3d7a ("IB/mlx4: Use flow counters on IBoE ports") added code that sets elements of counters[] to -1 if no counter is allocated, but then goes ahead and passes every entry to mlx4_counter_free() on shutdown. This is a bad idea, especially if MLX4_DEV_CAP_FLAG_COUNTERS isn't set so there isn't even an underlying bitmap to free from. Tested-by: Sean Hefty Cc: Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 77f3dbc0aaa1..18836cdf1e10 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -1244,7 +1244,8 @@ err_reg: err_counter: for (; i; --i) - mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]); + if (ibdev->counters[i - 1] != -1) + mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]); err_map: iounmap(ibdev->uar_map); @@ -1275,7 +1276,8 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr) } iounmap(ibdev->uar_map); for (p = 0; p < ibdev->num_ports; ++p) - mlx4_counter_free(ibdev->dev, ibdev->counters[p]); + if (ibdev->counters[p] != -1) + mlx4_counter_free(ibdev->dev, ibdev->counters[p]); mlx4_foreach_port(p, dev, MLX4_PORT_TYPE_IB) mlx4_CLOSE_PORT(dev, p); -- cgit v1.2.3-70-g09d2 From 5bf1e97dc34bf09643815ed48be3d1761a5985e1 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 15 Nov 2011 22:22:49 +0100 Subject: m68k: Wire up process_vm_{read,write}v Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer --- arch/m68k/include/asm/unistd.h | 4 +++- arch/m68k/kernel/syscalltable.S | 2 ++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 43f984e93970..303192fc9260 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -350,10 +350,12 @@ #define __NR_clock_adjtime 342 #define __NR_syncfs 343 #define __NR_setns 344 +#define __NR_process_vm_readv 345 +#define __NR_process_vm_writev 346 #ifdef __KERNEL__ -#define NR_syscalls 345 +#define NR_syscalls 347 #define __ARCH_WANT_IPC_PARSE_VERSION #define __ARCH_WANT_OLD_READDIR diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index c468f2edaa85..ce827b376110 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -365,4 +365,6 @@ ENTRY(sys_call_table) .long sys_clock_adjtime .long sys_syncfs .long sys_setns + .long sys_process_vm_readv /* 345 */ + .long sys_process_vm_writev -- cgit v1.2.3-70-g09d2 From 9f9c19ec1a59422c7687b11847ed3408128aa0d6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 28 Nov 2011 08:17:36 +0000 Subject: xfs: fix the logspace waiting algorithm Apply the scheme used in log_regrant_write_log_space to wake up any other threads waiting for log space before the newly added one to log_regrant_write_log_space as well, and factor the code into readable helpers. For each of the queues we have add two helpers: - one to try to wake up all waiting threads. This helper will also be usable by xfs_log_move_tail once we remove the current opportunistic wakeups in it. - one to sleep on t_wait until enough log space is available, loosely modelled after Linux waitqueues. And use them to reimplement the guts of log_regrant_write_log_space and log_regrant_write_log_space. These two function now use one and the same algorithm for waiting on log space instead of subtly different ones before, with an option to completely unify them in the near future. Also move the filesystem shutdown handling to the common caller given that we had to touch it anyway. Based on hard debugging and an earlier patch from Chandra Seetharaman . Signed-off-by: Christoph Hellwig Reviewed-by: Chandra Seetharaman Tested-by: Chandra Seetharaman Signed-off-by: Ben Myers --- fs/xfs/xfs_log.c | 348 ++++++++++++++++++++++++++--------------------------- fs/xfs/xfs_trace.h | 12 +- 2 files changed, 177 insertions(+), 183 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index a14cd89fe465..34817adf4b9e 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -150,6 +150,117 @@ xlog_grant_add_space( } while (head_val != old); } +STATIC bool +xlog_reserveq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_reserveq, t_queue) { + if (tic->t_flags & XLOG_TIC_PERM_RESERV) + need_bytes = tic->t_unit_res * tic->t_cnt; + else + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_grant_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC bool +xlog_writeq_wake( + struct log *log, + int *free_bytes) +{ + struct xlog_ticket *tic; + int need_bytes; + + list_for_each_entry(tic, &log->l_writeq, t_queue) { + ASSERT(tic->t_flags & XLOG_TIC_PERM_RESERV); + + need_bytes = tic->t_unit_res; + + if (*free_bytes < need_bytes) + return false; + *free_bytes -= need_bytes; + + trace_xfs_log_regrant_write_wake_up(log, tic); + wake_up(&tic->t_wait); + } + + return true; +} + +STATIC int +xlog_reserveq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_reserveq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_grant_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); + trace_xfs_log_grant_wake(log, tic); + + spin_lock(&log->l_grant_reserve_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_reserve_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + +STATIC int +xlog_writeq_wait( + struct log *log, + struct xlog_ticket *tic, + int need_bytes) +{ + list_add_tail(&tic->t_queue, &log->l_writeq); + + do { + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + xlog_grant_push_ail(log, need_bytes); + + XFS_STATS_INC(xs_sleep_logspace); + trace_xfs_log_regrant_write_sleep(log, tic); + + xlog_wait(&tic->t_wait, &log->l_grant_write_lock); + trace_xfs_log_regrant_write_wake(log, tic); + + spin_lock(&log->l_grant_write_lock); + if (XLOG_FORCED_SHUTDOWN(log)) + goto shutdown; + } while (xlog_space_left(log, &log->l_grant_write_head) < need_bytes); + + list_del_init(&tic->t_queue); + return 0; +shutdown: + list_del_init(&tic->t_queue); + return XFS_ERROR(EIO); +} + static void xlog_tic_reset_res(xlog_ticket_t *tic) { @@ -350,8 +461,19 @@ xfs_log_reserve( retval = xlog_grant_log_space(log, internal_ticket); } + if (unlikely(retval)) { + /* + * If we are failing, make sure the ticket doesn't have any + * current reservations. We don't want to add this back + * when the ticket/ transaction gets cancelled. + */ + internal_ticket->t_curr_res = 0; + /* ungrant will give back unit_res * t_cnt. */ + internal_ticket->t_cnt = 0; + } + return retval; -} /* xfs_log_reserve */ +} /* @@ -2481,8 +2603,8 @@ restart: /* * Atomically get the log space required for a log ticket. * - * Once a ticket gets put onto the reserveq, it will only return after - * the needed reservation is satisfied. + * Once a ticket gets put onto the reserveq, it will only return after the + * needed reservation is satisfied. * * This function is structured so that it has a lock free fast path. This is * necessary because every new transaction reservation will come through this @@ -2490,113 +2612,53 @@ restart: * every pass. * * As tickets are only ever moved on and off the reserveq under the - * l_grant_reserve_lock, we only need to take that lock if we are going - * to add the ticket to the queue and sleep. We can avoid taking the lock if the - * ticket was never added to the reserveq because the t_queue list head will be - * empty and we hold the only reference to it so it can safely be checked - * unlocked. + * l_grant_reserve_lock, we only need to take that lock if we are going to add + * the ticket to the queue and sleep. We can avoid taking the lock if the ticket + * was never added to the reserveq because the t_queue list head will be empty + * and we hold the only reference to it so it can safely be checked unlocked. */ STATIC int -xlog_grant_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_grant_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes; - int need_bytes; + int free_bytes, need_bytes; + int error = 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("grant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_grant_enter(log, tic); + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. + */ need_bytes = tic->t_unit_res; if (tic->t_flags & XFS_LOG_PERM_RESERV) need_bytes *= tic->t_ocnt; - - /* something is already sleeping; insert new transaction at end */ - if (!list_empty_careful(&log->l_reserveq)) { - spin_lock(&log->l_grant_reserve_lock); - /* recheck the queue now we are locked */ - if (list_empty(&log->l_reserveq)) { - spin_unlock(&log->l_grant_reserve_lock); - goto redo; - } - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep1(log, tic); - - /* - * Gotta check this before going to sleep, while we're - * holding the grant lock. - */ - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - /* - * If we got an error, and the filesystem is shutting down, - * we'll catch it down below. So just continue... - */ - trace_xfs_log_grant_wake1(log, tic); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - free_bytes = xlog_space_left(log, &log->l_grant_reserve_head); - if (free_bytes < need_bytes) { + if (!list_empty_careful(&log->l_reserveq)) { spin_lock(&log->l_grant_reserve_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_reserveq); - - trace_xfs_log_grant_sleep2(log, tic); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_reserve_lock); - - trace_xfs_log_grant_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { + if (!xlog_reserveq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_reserveq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_reserve_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_reserve_lock); - list_del_init(&tic->t_queue); + error = xlog_reserveq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_reserve_lock); } + if (error) + return error; - /* we've got enough space */ xlog_grant_add_space(log, &log->l_grant_reserve_head, need_bytes); xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_grant_exit(log, tic); xlog_verify_grant_tail(log); return 0; - -error_return_unlocked: - spin_lock(&log->l_grant_reserve_lock); -error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_reserve_lock); - trace_xfs_log_grant_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_grant_log_space */ - +} /* * Replenish the byte reservation required by moving the grant write head. @@ -2605,10 +2667,12 @@ error_return: * free fast path. */ STATIC int -xlog_regrant_write_log_space(xlog_t *log, - xlog_ticket_t *tic) +xlog_regrant_write_log_space( + struct log *log, + struct xlog_ticket *tic) { - int free_bytes, need_bytes; + int free_bytes, need_bytes; + int error = 0; tic->t_curr_res = tic->t_unit_res; xlog_tic_reset_res(tic); @@ -2616,104 +2680,38 @@ xlog_regrant_write_log_space(xlog_t *log, if (tic->t_cnt > 0) return 0; -#ifdef DEBUG - if (log->l_flags & XLOG_ACTIVE_RECOVERY) - panic("regrant Recovery problem"); -#endif + ASSERT(!(log->l_flags & XLOG_ACTIVE_RECOVERY)); trace_xfs_log_regrant_write_enter(log, tic); - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - /* If there are other waiters on the queue then give them a - * chance at logspace before us. Wake up the first waiters, - * if we do not wake up all the waiters then go to sleep waiting - * for more free space, otherwise try to get some space for - * this transaction. + /* + * If there are other waiters on the queue then give them a chance at + * logspace before us. Wake up the first waiters, if we do not wake + * up all the waiters then go to sleep waiting for more free space, + * otherwise try to get some space for this transaction. */ need_bytes = tic->t_unit_res; - if (!list_empty_careful(&log->l_writeq)) { - struct xlog_ticket *ntic; - - spin_lock(&log->l_grant_write_lock); - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - list_for_each_entry(ntic, &log->l_writeq, t_queue) { - ASSERT(ntic->t_flags & XLOG_TIC_PERM_RESERV); - - if (free_bytes < ntic->t_unit_res) - break; - free_bytes -= ntic->t_unit_res; - wake_up(&ntic->t_wait); - } - - if (ntic != list_first_entry(&log->l_writeq, - struct xlog_ticket, t_queue)) { - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - trace_xfs_log_regrant_write_sleep1(log, tic); - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - trace_xfs_log_regrant_write_wake1(log, tic); - } else - spin_unlock(&log->l_grant_write_lock); - } - -redo: - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return_unlocked; - free_bytes = xlog_space_left(log, &log->l_grant_write_head); - if (free_bytes < need_bytes) { + if (!list_empty_careful(&log->l_writeq)) { spin_lock(&log->l_grant_write_lock); - if (list_empty(&tic->t_queue)) - list_add_tail(&tic->t_queue, &log->l_writeq); - - if (XLOG_FORCED_SHUTDOWN(log)) - goto error_return; - - xlog_grant_push_ail(log, need_bytes); - - XFS_STATS_INC(xs_sleep_logspace); - trace_xfs_log_regrant_write_sleep2(log, tic); - xlog_wait(&tic->t_wait, &log->l_grant_write_lock); - - trace_xfs_log_regrant_write_wake2(log, tic); - goto redo; - } - - if (!list_empty(&tic->t_queue)) { + if (!xlog_writeq_wake(log, &free_bytes) || + free_bytes < need_bytes) + error = xlog_writeq_wait(log, tic, need_bytes); + spin_unlock(&log->l_grant_write_lock); + } else if (free_bytes < need_bytes) { spin_lock(&log->l_grant_write_lock); - list_del_init(&tic->t_queue); + error = xlog_writeq_wait(log, tic, need_bytes); spin_unlock(&log->l_grant_write_lock); } - /* we've got enough space */ + if (error) + return error; + xlog_grant_add_space(log, &log->l_grant_write_head, need_bytes); trace_xfs_log_regrant_write_exit(log, tic); xlog_verify_grant_tail(log); return 0; - - - error_return_unlocked: - spin_lock(&log->l_grant_write_lock); - error_return: - list_del_init(&tic->t_queue); - spin_unlock(&log->l_grant_write_lock); - trace_xfs_log_regrant_write_error(log, tic); - - /* - * If we are failing, make sure the ticket doesn't have any - * current reservations. We don't want to add this back when - * the ticket/transaction gets cancelled. - */ - tic->t_curr_res = 0; - tic->t_cnt = 0; /* ungrant will give back unit_res * t_cnt. */ - return XFS_ERROR(EIO); -} /* xlog_regrant_write_log_space */ - +} /* The first cnt-1 times through here we don't need to * move the grant write head because the permanent diff --git a/fs/xfs/xfs_trace.h b/fs/xfs/xfs_trace.h index f1d2802b2f07..494035798873 100644 --- a/fs/xfs/xfs_trace.h +++ b/fs/xfs/xfs_trace.h @@ -834,18 +834,14 @@ DEFINE_LOGGRANT_EVENT(xfs_log_umount_write); DEFINE_LOGGRANT_EVENT(xfs_log_grant_enter); DEFINE_LOGGRANT_EVENT(xfs_log_grant_exit); DEFINE_LOGGRANT_EVENT(xfs_log_grant_error); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake); DEFINE_LOGGRANT_EVENT(xfs_log_grant_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_exit); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_error); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake1); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep2); -DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake2); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_sleep); +DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_write_wake_up); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_enter); DEFINE_LOGGRANT_EVENT(xfs_log_regrant_reserve_exit); -- cgit v1.2.3-70-g09d2 From 02125a826459a6ad142f8d91c5b6357562f96615 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 5 Dec 2011 08:43:34 -0500 Subject: fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen ACKed-by: John Johansen Signed-off-by: Al Viro Cc: stable@vger.kernel.org --- fs/dcache.c | 71 ++++++++++++++++++++++++++++------------------ fs/namespace.c | 20 +++++++------ fs/seq_file.c | 6 ++-- include/linux/dcache.h | 3 +- include/linux/fs.h | 1 + security/apparmor/path.c | 65 ++++++++++++++++++++++++------------------ security/tomoyo/realpath.c | 3 +- 7 files changed, 100 insertions(+), 69 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 10ba92def3f6..89509b5a090e 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -2439,16 +2439,14 @@ static int prepend_name(char **buffer, int *buflen, struct qstr *name) /** * prepend_path - Prepend path string to a buffer * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buffer: pointer to the end of the buffer * @buflen: pointer to buffer length * * Caller holds the rename_lock. - * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). */ -static int prepend_path(const struct path *path, struct path *root, +static int prepend_path(const struct path *path, + const struct path *root, char **buffer, int *buflen) { struct dentry *dentry = path->dentry; @@ -2483,10 +2481,10 @@ static int prepend_path(const struct path *path, struct path *root, dentry = parent; } -out: if (!error && !slash) error = prepend(buffer, buflen, "/", 1); +out: br_read_unlock(vfsmount_lock); return error; @@ -2500,15 +2498,17 @@ global_root: WARN(1, "Root dentry has weird name <%.*s>\n", (int) dentry->d_name.len, dentry->d_name.name); } - root->mnt = vfsmnt; - root->dentry = dentry; + if (!slash) + error = prepend(buffer, buflen, "/", 1); + if (!error) + error = vfsmnt->mnt_ns ? 1 : 2; goto out; } /** * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report - * @root: root vfsmnt/dentry (may be modified by this function) + * @root: root vfsmnt/dentry * @buf: buffer to return value in * @buflen: buffer length * @@ -2519,10 +2519,10 @@ global_root: * * "buflen" should be positive. * - * If path is not reachable from the supplied root, then the value of - * root is changed (without modifying refcounts). + * If the path is not reachable from the supplied root, return %NULL. */ -char *__d_path(const struct path *path, struct path *root, +char *__d_path(const struct path *path, + const struct path *root, char *buf, int buflen) { char *res = buf + buflen; @@ -2533,7 +2533,28 @@ char *__d_path(const struct path *path, struct path *root, error = prepend_path(path, root, &res, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) + return ERR_PTR(error); + if (error > 0) + return NULL; + return res; +} + +char *d_absolute_path(const struct path *path, + char *buf, int buflen) +{ + struct path root = {}; + char *res = buf + buflen; + int error; + + prepend(&res, &buflen, "\0", 1); + write_seqlock(&rename_lock); + error = prepend_path(path, &root, &res, &buflen); + write_sequnlock(&rename_lock); + + if (error > 1) + error = -EINVAL; + if (error < 0) return ERR_PTR(error); return res; } @@ -2541,8 +2562,9 @@ char *__d_path(const struct path *path, struct path *root, /* * same as __d_path but appends "(deleted)" for unlinked files. */ -static int path_with_deleted(const struct path *path, struct path *root, - char **buf, int *buflen) +static int path_with_deleted(const struct path *path, + const struct path *root, + char **buf, int *buflen) { prepend(buf, buflen, "\0", 1); if (d_unlinked(path->dentry)) { @@ -2579,7 +2601,6 @@ char *d_path(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; /* @@ -2594,9 +2615,8 @@ char *d_path(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (error) + error = path_with_deleted(path, &root, &res, &buflen); + if (error < 0) res = ERR_PTR(error); write_sequnlock(&rename_lock); path_put(&root); @@ -2617,7 +2637,6 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) { char *res = buf + buflen; struct path root; - struct path tmp; int error; if (path->dentry->d_op && path->dentry->d_op->d_dname) @@ -2625,9 +2644,8 @@ char *d_path_with_unreachable(const struct path *path, char *buf, int buflen) get_fs_root(current->fs, &root); write_seqlock(&rename_lock); - tmp = root; - error = path_with_deleted(path, &tmp, &res, &buflen); - if (!error && !path_equal(&tmp, &root)) + error = path_with_deleted(path, &root, &res, &buflen); + if (error > 0) error = prepend_unreachable(&res, &buflen); write_sequnlock(&rename_lock); path_put(&root); @@ -2758,19 +2776,18 @@ SYSCALL_DEFINE2(getcwd, char __user *, buf, unsigned long, size) write_seqlock(&rename_lock); if (!d_unlinked(pwd.dentry)) { unsigned long len; - struct path tmp = root; char *cwd = page + PAGE_SIZE; int buflen = PAGE_SIZE; prepend(&cwd, &buflen, "\0", 1); - error = prepend_path(&pwd, &tmp, &cwd, &buflen); + error = prepend_path(&pwd, &root, &cwd, &buflen); write_sequnlock(&rename_lock); - if (error) + if (error < 0) goto out; /* Unreachable from current root */ - if (!path_equal(&tmp, &root)) { + if (error > 0) { error = prepend_unreachable(&cwd, &buflen); if (error) goto out; diff --git a/fs/namespace.c b/fs/namespace.c index 6d3a1963879b..cfc6d4448aa5 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1048,15 +1048,12 @@ static int show_mountinfo(struct seq_file *m, void *v) if (err) goto out; seq_putc(m, ' '); - seq_path_root(m, &mnt_path, &root, " \t\n\\"); - if (root.mnt != p->root.mnt || root.dentry != p->root.dentry) { - /* - * Mountpoint is outside root, discard that one. Ugly, - * but less so than trying to do that in iterator in a - * race-free way (due to renames). - */ - return SEQ_SKIP; - } + + /* mountpoints outside of chroot jail will give SEQ_SKIP on this */ + err = seq_path_root(m, &mnt_path, &root, " \t\n\\"); + if (err) + goto out; + seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw"); show_mnt_opts(m, mnt); @@ -2776,3 +2773,8 @@ void kern_unmount(struct vfsmount *mnt) } } EXPORT_SYMBOL(kern_unmount); + +bool our_mnt(struct vfsmount *mnt) +{ + return check_mnt(mnt); +} diff --git a/fs/seq_file.c b/fs/seq_file.c index 05d6b0e78c95..dba43c3ea3af 100644 --- a/fs/seq_file.c +++ b/fs/seq_file.c @@ -449,8 +449,6 @@ EXPORT_SYMBOL(seq_path); /* * Same as seq_path, but relative to supplied root. - * - * root may be changed, see __d_path(). */ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *esc) @@ -463,6 +461,8 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, char *p; p = __d_path(path, root, buf, size); + if (!p) + return SEQ_SKIP; res = PTR_ERR(p); if (!IS_ERR(p)) { char *end = mangle_path(buf, p, esc); @@ -474,7 +474,7 @@ int seq_path_root(struct seq_file *m, struct path *path, struct path *root, } seq_commit(m, res); - return res < 0 ? res : 0; + return res < 0 && res != -ENAMETOOLONG ? res : 0; } /* diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 4df926199369..ed9f74f6c519 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -339,7 +339,8 @@ extern int d_validate(struct dentry *, struct dentry *); */ extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); -extern char *__d_path(const struct path *path, struct path *root, char *, int); +extern char *__d_path(const struct path *, const struct path *, char *, int); +extern char *d_absolute_path(const struct path *, char *, int); extern char *d_path(const struct path *, char *, int); extern char *d_path_with_unreachable(const struct path *, char *, int); extern char *dentry_path_raw(struct dentry *, char *, int); diff --git a/include/linux/fs.h b/include/linux/fs.h index e3130220ce3e..019dc558df1a 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -1942,6 +1942,7 @@ extern int fd_statfs(int, struct kstatfs *); extern int statfs_by_dentry(struct dentry *, struct kstatfs *); extern int freeze_super(struct super_block *super); extern int thaw_super(struct super_block *super); +extern bool our_mnt(struct vfsmount *mnt); extern int current_umask(void); diff --git a/security/apparmor/path.c b/security/apparmor/path.c index 36cc0cc39e78..b566eba4a65c 100644 --- a/security/apparmor/path.c +++ b/security/apparmor/path.c @@ -57,23 +57,44 @@ static int prepend(char **buffer, int buflen, const char *str, int namelen) static int d_namespace_path(struct path *path, char *buf, int buflen, char **name, int flags) { - struct path root, tmp; char *res; - int connected, error = 0; + int error = 0; + int connected = 1; + + if (path->mnt->mnt_flags & MNT_INTERNAL) { + /* it's not mounted anywhere */ + res = dentry_path(path->dentry, buf, buflen); + *name = res; + if (IS_ERR(res)) { + *name = buf; + return PTR_ERR(res); + } + if (path->dentry->d_sb->s_magic == PROC_SUPER_MAGIC && + strncmp(*name, "/sys/", 5) == 0) { + /* TODO: convert over to using a per namespace + * control instead of hard coded /proc + */ + return prepend(name, *name - buf, "/proc", 5); + } + return 0; + } - /* Get the root we want to resolve too, released below */ + /* resolve paths relative to chroot?*/ if (flags & PATH_CHROOT_REL) { - /* resolve paths relative to chroot */ + struct path root; get_fs_root(current->fs, &root); - } else { - /* resolve paths relative to namespace */ - root.mnt = current->nsproxy->mnt_ns->root; - root.dentry = root.mnt->mnt_root; - path_get(&root); + res = __d_path(path, &root, buf, buflen); + if (res && !IS_ERR(res)) { + /* everything's fine */ + *name = res; + path_put(&root); + goto ok; + } + path_put(&root); + connected = 0; } - tmp = root; - res = __d_path(path, &tmp, buf, buflen); + res = d_absolute_path(path, buf, buflen); *name = res; /* handle error conditions - and still allow a partial path to @@ -84,7 +105,10 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, *name = buf; goto out; } + if (!our_mnt(path->mnt)) + connected = 0; +ok: /* Handle two cases: * 1. A deleted dentry && profile is not allowing mediation of deleted * 2. On some filesystems, newly allocated dentries appear to the @@ -97,10 +121,7 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, goto out; } - /* Determine if the path is connected to the expected root */ - connected = tmp.dentry == root.dentry && tmp.mnt == root.mnt; - - /* If the path is not connected, + /* If the path is not connected to the expected root, * check if it is a sysctl and handle specially else remove any * leading / that __d_path may have returned. * Unless @@ -112,17 +133,9 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, * namespace root. */ if (!connected) { - /* is the disconnect path a sysctl? */ - if (tmp.dentry->d_sb->s_magic == PROC_SUPER_MAGIC && - strncmp(*name, "/sys/", 5) == 0) { - /* TODO: convert over to using a per namespace - * control instead of hard coded /proc - */ - error = prepend(name, *name - buf, "/proc", 5); - } else if (!(flags & PATH_CONNECT_PATH) && + if (!(flags & PATH_CONNECT_PATH) && !(((flags & CHROOT_NSCONNECT) == CHROOT_NSCONNECT) && - (tmp.mnt == current->nsproxy->mnt_ns->root && - tmp.dentry == tmp.mnt->mnt_root))) { + our_mnt(path->mnt))) { /* disconnected path, don't return pathname starting * with '/' */ @@ -133,8 +146,6 @@ static int d_namespace_path(struct path *path, char *buf, int buflen, } out: - path_put(&root); - return error; } diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 738bbdf8d4c7..36fa7c9bedc4 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -101,9 +101,8 @@ static char *tomoyo_get_absolute_path(struct path *path, char * const buffer, { char *pos = ERR_PTR(-ENOMEM); if (buflen >= 256) { - struct path ns_root = { }; /* go to whatever namespace root we are under */ - pos = __d_path(path, &ns_root, buffer, buflen - 1); + pos = d_absolute_path(path, buffer, buflen - 1); if (!IS_ERR(pos) && *pos == '/' && pos[1]) { struct inode *inode = path->dentry->d_inode; if (inode && S_ISDIR(inode->i_mode)) { -- cgit v1.2.3-70-g09d2 From 7148b7999277e2794cec90d8cb47d2a238e0bd0d Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Fri, 11 Nov 2011 17:06:20 +0000 Subject: mtd: pxa2xx-flash.c: It used to fall back to provided table. Make this work again. Signed-off-by: Jonathan Cameron Acked-by: Dmitry Eremin-Solenikov Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/pxa2xx-flash.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/maps/pxa2xx-flash.c b/drivers/mtd/maps/pxa2xx-flash.c index 411a17df9fc1..2a25b6789af4 100644 --- a/drivers/mtd/maps/pxa2xx-flash.c +++ b/drivers/mtd/maps/pxa2xx-flash.c @@ -98,7 +98,7 @@ static int __devinit pxa2xx_flash_probe(struct platform_device *pdev) } info->mtd->owner = THIS_MODULE; - mtd_device_parse_register(info->mtd, probes, 0, NULL, 0); + mtd_device_parse_register(info->mtd, probes, 0, flash->parts, flash->nr_parts); platform_set_drvdata(pdev, info); return 0; -- cgit v1.2.3-70-g09d2 From dc87cd5c264cb587f16459285565830689ecf7a7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 2 Dec 2011 18:15:27 -0500 Subject: drm/radeon/kms: fix return type for radeon_encoder_get_dp_bridge_encoder_id Seems like something got mis-merged here. Noticed by kallisti5 on IRC. Signed-off-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_encoders.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 06e413e6a920..4b27efa4405b 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -233,13 +233,12 @@ u16 radeon_encoder_get_dp_bridge_encoder_id(struct drm_encoder *encoder) switch (radeon_encoder->encoder_id) { case ENCODER_OBJECT_ID_TRAVIS: case ENCODER_OBJECT_ID_NUTMEG: - return true; + return radeon_encoder->encoder_id; default: - return false; + return ENCODER_OBJECT_ID_NONE; } } - - return false; + return ENCODER_OBJECT_ID_NONE; } void radeon_panel_mode_fixup(struct drm_encoder *encoder, -- cgit v1.2.3-70-g09d2 From eb1711bb94991e93669c5a1b5f84f11be2d51ea1 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 6 Dec 2011 12:12:33 +0100 Subject: drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a The recursion loop goes retire_requests->unbind->gpu_idle->retire_reqeusts. Every time we go through this we need a - active object that can be retired - and there are no other references to that object than the one from the active list, so that it gets unbound and freed immediately. Otherwise the recursion stops. So the recursion is only limited by the number of objects that fit these requirements sitting in the active list any time retire_request is called. Issue exercised by tests/gem_unref_active_buffers from i-g-t. There's been a decent bikeshed discussion whether it wouldn't be better to pass around a flag, but imo this is o.k. for such a limited case that only supports a w/a. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42180 Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson [ickle- we built better bikesheds, but this keeps the rain off for now] Tested-by: Dave Airlie Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_gem.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 8359dc777041..60ff1b63b568 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2026,8 +2026,13 @@ i915_wait_request(struct intel_ring_buffer *ring, * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. + * + * To avoid a recursion with the ilk VT-d workaround (that calls + * gpu_idle when unbinding objects with interruptible==false) don't + * retire requests in that case (because it might call unbind if the + * active list holds the last reference to the object). */ - if (ret == 0) + if (ret == 0 && dev_priv->mm.interruptible) i915_gem_retire_requests_ring(ring); return ret; -- cgit v1.2.3-70-g09d2 From 24bb5a0ce39c51a2e2602c947f218a19e4b26d7d Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 29 Nov 2011 22:08:00 +0100 Subject: vmwgfx: Use kcalloc instead of kzalloc to allocate array The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 3f6343502d1f..5ff561d4e0b4 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -140,7 +140,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; @@ -232,7 +232,7 @@ int vmw_present_readback_ioctl(struct drm_device *dev, void *data, goto out_clips; } - clips = kzalloc(num_clips * sizeof(*clips), GFP_KERNEL); + clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); if (clips == NULL) { DRM_ERROR("Failed to allocate clip rect list.\n"); ret = -ENOMEM; -- cgit v1.2.3-70-g09d2 From 71c7a97289571ef5246b7f20d60b44961144c82f Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 14 Nov 2011 04:28:59 -0300 Subject: [media] omap_vout: fix crash if no driver for a display omap_vout crashes on start if a corresponding driver is not loaded for a display device. This patch changes omap_vout init sequence to skip devices without a driver. Signed-off-by: Tomi Valkeinen Acked-by: Vaibhav Hiremath Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap/omap_vout.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 9c5c19f142de..2d2a136e465e 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -2169,6 +2169,14 @@ static int __init omap_vout_probe(struct platform_device *pdev) vid_dev->num_displays = 0; for_each_dss_dev(dssdev) { omap_dss_get_device(dssdev); + + if (!dssdev->driver) { + dev_warn(&pdev->dev, "no driver for display: %s\n", + dssdev->name); + omap_dss_put_device(dssdev); + continue; + } + vid_dev->displays[vid_dev->num_displays++] = dssdev; } -- cgit v1.2.3-70-g09d2 From 86b47c25494b824da655b95f6fdb4fdb3f17aa77 Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 22 Nov 2011 16:08:21 +0200 Subject: perf: Do no try to schedule task events if there are none perf_event_sched_in() shouldn't try to schedule task events if there are none otherwise task's ctx->is_active will be set and will not be cleared during sched_out. This will prevent newly added events from being scheduled into the task context. Fixes a boo-boo in commit 1d5f003f5a9 ("perf: Do not set task_ctx pointer in cpuctx if there are no events in the context"). Signed-off-by: Gleb Natapov Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111122140821.GF2557@redhat.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 600c1629b64d..d3b9df5962c2 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2174,11 +2174,11 @@ static void perf_event_context_sched_in(struct perf_event_context *ctx, */ cpu_ctx_sched_out(cpuctx, EVENT_FLEXIBLE); - perf_event_sched_in(cpuctx, ctx, task); - if (ctx->nr_events) cpuctx->task_ctx = ctx; + perf_event_sched_in(cpuctx, cpuctx->task_ctx, task); + perf_pmu_enable(ctx->pmu); perf_ctx_unlock(cpuctx, ctx); -- cgit v1.2.3-70-g09d2 From 68264d2a081f4032804adedb9ed9a680f7dade7e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 7 Dec 2011 17:44:47 +0800 Subject: ASoC: Fix a typo in jive_wm8750 Fix a typo in jive_wm8750 that introduces below build error. Also removes an unused err variable. CC sound/soc/samsung/jive_wm8750.o sound/soc/samsung/jive_wm8750.c: In function 'jive_wm8750_init': sound/soc/samsung/jive_wm8750.c:104: warning: unused variable 'err' sound/soc/samsung/jive_wm8750.c: At top level: sound/soc/samsung/jive_wm8750.c:134: error: unknown field 'dapm_widgtets' specified in initializer sound/soc/samsung/jive_wm8750.c:134: warning: initialization from incompatible pointer type make[3]: *** [sound/soc/samsung/jive_wm8750.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/samsung/jive_wm8750.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c index 1826acf20f7c..8e523fd9189e 100644 --- a/sound/soc/samsung/jive_wm8750.c +++ b/sound/soc/samsung/jive_wm8750.c @@ -101,7 +101,6 @@ static int jive_wm8750_init(struct snd_soc_pcm_runtime *rtd) { struct snd_soc_codec *codec = rtd->codec; struct snd_soc_dapm_context *dapm = &codec->dapm; - int err; /* These endpoints are not being used. */ snd_soc_dapm_nc_pin(dapm, "LINPUT2"); @@ -131,7 +130,7 @@ static struct snd_soc_card snd_soc_machine_jive = { .dai_link = &jive_dai, .num_links = 1, - .dapm_widgtets = wm8750_dapm_widgets, + .dapm_widgets = wm8750_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets), .dapm_routes = audio_map, .num_dapm_routes = ARRAY_SIZE(audio_map), -- cgit v1.2.3-70-g09d2 From 974edd30beafdb136cdfc6839a143e23c826dc89 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 7 Dec 2011 17:52:19 +0800 Subject: ASoC: Include linux/module.h for smdk2443_wm9710 Include linux/module.h to fix below build error: CC sound/soc/samsung/smdk2443_wm9710.o sound/soc/samsung/smdk2443_wm9710.c:64: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:64: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:64: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' sound/soc/samsung/smdk2443_wm9710.c:64: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:65: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:65: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:65: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' sound/soc/samsung/smdk2443_wm9710.c:65: warning: function declaration isn't a prototype sound/soc/samsung/smdk2443_wm9710.c:66: error: expected declaration specifiers or '...' before string constant sound/soc/samsung/smdk2443_wm9710.c:66: warning: data definition has no type or storage class sound/soc/samsung/smdk2443_wm9710.c:66: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' sound/soc/samsung/smdk2443_wm9710.c:66: warning: function declaration isn't a prototype make[3]: *** [sound/soc/samsung/smdk2443_wm9710.o] Error 1 make[2]: *** [sound/soc/samsung] Error 2 make[1]: *** [sound/soc] Error 2 make: *** [sound] Error 2 Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/samsung/smdk2443_wm9710.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/samsung/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c index 3a0dbfc793f0..8bd1dc5706bf 100644 --- a/sound/soc/samsung/smdk2443_wm9710.c +++ b/sound/soc/samsung/smdk2443_wm9710.c @@ -12,6 +12,7 @@ * */ +#include #include static struct snd_soc_card smdk2443; -- cgit v1.2.3-70-g09d2 From 766ddee68bf1e4cc2cdcf73b34d243cf6e6f8ab0 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 16:55:19 +0100 Subject: ALSA: hda/realtek - Don't create extra controls with channel suffix The multiple headphone or speaker pins are usually provided to output the same stream unlike line-out jacks (which are supposed to be multi-channel surrounds). Thus giving a mixer name like "Headphone Surround" is rather confusing. Instead, when multiple headphone volumes are available, use index with the same "Headphone" name. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a7d1bc4e0d09..96f5da9db5cf 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3173,7 +3173,8 @@ static int alc_auto_create_multi_out_ctls(struct hda_codec *codec, } static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, - hda_nid_t dac, const char *pfx) + hda_nid_t dac, const char *pfx, + int cidx) { struct alc_spec *spec = codec->spec; hda_nid_t sw, vol; @@ -3189,15 +3190,15 @@ static int alc_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin, if (is_ctl_used(spec->sw_ctls, val)) return 0; /* already created */ mark_ctl_usage(spec->sw_ctls, val); - return add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, val); + return __add_pb_sw_ctrl(spec, ALC_CTL_WIDGET_MUTE, pfx, cidx, val); } sw = alc_look_for_out_mute_nid(codec, pin, dac); vol = alc_look_for_out_vol_nid(codec, pin, dac); - err = alc_auto_add_stereo_vol(codec, pfx, 0, vol); + err = alc_auto_add_stereo_vol(codec, pfx, cidx, vol); if (err < 0) return err; - err = alc_auto_add_stereo_sw(codec, pfx, 0, sw); + err = alc_auto_add_stereo_sw(codec, pfx, cidx, sw); if (err < 0) return err; return 0; @@ -3238,16 +3239,21 @@ static int alc_auto_create_extra_outs(struct hda_codec *codec, int num_pins, hda_nid_t dac = *dacs; if (!dac) dac = spec->multiout.dac_nids[0]; - return alc_auto_create_extra_out(codec, *pins, dac, pfx); + return alc_auto_create_extra_out(codec, *pins, dac, pfx, 0); } if (dacs[num_pins - 1]) { /* OK, we have a multi-output system with individual volumes */ for (i = 0; i < num_pins; i++) { - snprintf(name, sizeof(name), "%s %s", - pfx, channel_name[i]); - err = alc_auto_create_extra_out(codec, pins[i], dacs[i], - name); + if (num_pins >= 3) { + snprintf(name, sizeof(name), "%s %s", + pfx, channel_name[i]); + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + name, 0); + } else { + err = alc_auto_create_extra_out(codec, pins[i], dacs[i], + pfx, i); + } if (err < 0) return err; } -- cgit v1.2.3-70-g09d2 From fbabc24619f7298626265a3f973786b471b8c29d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:14:20 +0100 Subject: ALSA: hda/realtek - Create "Bass Speaker" for two speaker pins On systems with two speaker pins, the secondary speaker pin is mostly assigned to a bass speaker instead of a surround. Thus it makes more sense to rename the control properly. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 96f5da9db5cf..214d4f91d6af 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2631,6 +2631,8 @@ static const char *alc_get_line_out_pfx(struct alc_spec *spec, int ch, case AUTO_PIN_SPEAKER_OUT: if (cfg->line_outs == 1) return "Speaker"; + if (cfg->line_outs == 2) + return ch ? "Bass Speaker" : "Speaker"; break; case AUTO_PIN_HP_OUT: /* for multi-io case, only the primary out */ -- cgit v1.2.3-70-g09d2 From 0a34b42b6245ccc710be6759cded5b7fe41ea1f9 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 7 Dec 2011 17:20:30 +0100 Subject: ALSA: hda/realtek - Fix lost speaker volume controls When there are the same or more number of HP pins are available, HP pins are used as the primary outputs instead of the speaker pins. But, in some cases (especially with ALC663 & co), some DACs are available only with a later pin and it's assigned to a speaker, and since the driver parses the pins from the lower NID, such a DAC was skipped eventually without assignments. This resulted in a regression, the missing speaker volume control in the new parser. As a workaround for this, now the driver retries the pin->DAC mapping again after restoring the speaker-pins as primary. This is still an ad hoc fix, but it works so far for most of Realtek codecs. Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 37 ++++++++++++++++++++++++++++++------- 1 file changed, 30 insertions(+), 7 deletions(-) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 214d4f91d6af..1d07e8fa2433 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -2906,7 +2906,7 @@ static hda_nid_t alc_auto_look_for_dac(struct hda_codec *codec, hda_nid_t pin) if (!nid) continue; if (found_in_nid_list(nid, spec->multiout.dac_nids, - spec->multiout.num_dacs)) + ARRAY_SIZE(spec->private_dac_nids))) continue; if (found_in_nid_list(nid, spec->multiout.hp_out_nid, ARRAY_SIZE(spec->multiout.hp_out_nid))) @@ -2927,6 +2927,7 @@ static hda_nid_t get_dac_if_single(struct hda_codec *codec, hda_nid_t pin) return 0; } +/* return 0 if no possible DAC is found, 1 if one or more found */ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, const hda_nid_t *pins, hda_nid_t *dacs) { @@ -2944,7 +2945,7 @@ static int alc_auto_fill_extra_dacs(struct hda_codec *codec, int num_outs, if (!dacs[i]) dacs[i] = alc_auto_look_for_dac(codec, pins[i]); } - return 0; + return 1; } static int alc_auto_fill_multi_ios(struct hda_codec *codec, @@ -2954,7 +2955,7 @@ static int alc_auto_fill_multi_ios(struct hda_codec *codec, static int alc_auto_fill_dac_nids(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; - const struct auto_pin_cfg *cfg = &spec->autocfg; + struct auto_pin_cfg *cfg = &spec->autocfg; bool redone = false; int i; @@ -2965,6 +2966,7 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) spec->multiout.extra_out_nid[0] = 0; memset(spec->private_dac_nids, 0, sizeof(spec->private_dac_nids)); spec->multiout.dac_nids = spec->private_dac_nids; + spec->multi_ios = 0; /* fill hard-wired DACs first */ if (!redone) { @@ -2998,10 +3000,12 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) for (i = 0; i < cfg->line_outs; i++) { if (spec->private_dac_nids[i]) spec->multiout.num_dacs++; - else + else { memmove(spec->private_dac_nids + i, spec->private_dac_nids + i + 1, sizeof(hda_nid_t) * (cfg->line_outs - i - 1)); + spec->private_dac_nids[cfg->line_outs - 1] = 0; + } } if (cfg->line_outs == 1 && cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { @@ -3023,9 +3027,28 @@ static int alc_auto_fill_dac_nids(struct hda_codec *codec) if (cfg->line_out_type != AUTO_PIN_HP_OUT) alc_auto_fill_extra_dacs(codec, cfg->hp_outs, cfg->hp_pins, spec->multiout.hp_out_nid); - if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) - alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, cfg->speaker_pins, - spec->multiout.extra_out_nid); + if (cfg->line_out_type != AUTO_PIN_SPEAKER_OUT) { + int err = alc_auto_fill_extra_dacs(codec, cfg->speaker_outs, + cfg->speaker_pins, + spec->multiout.extra_out_nid); + /* if no speaker volume is assigned, try again as the primary + * output + */ + if (!err && cfg->speaker_outs > 0 && + cfg->line_out_type == AUTO_PIN_HP_OUT) { + cfg->hp_outs = cfg->line_outs; + memcpy(cfg->hp_pins, cfg->line_out_pins, + sizeof(cfg->hp_pins)); + cfg->line_outs = cfg->speaker_outs; + memcpy(cfg->line_out_pins, cfg->speaker_pins, + sizeof(cfg->speaker_pins)); + cfg->speaker_outs = 0; + memset(cfg->speaker_pins, 0, sizeof(cfg->speaker_pins)); + cfg->line_out_type = AUTO_PIN_SPEAKER_OUT; + redone = false; + goto again; + } + } return 0; } -- cgit v1.2.3-70-g09d2 From 77a7300abad7fe01891b400e88d746f97307ee5a Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Wed, 7 Dec 2011 03:16:26 +0400 Subject: of/irq: Get rid of NO_IRQ usage PPC32/64 defines NO_IRQ to zero, so no problems expected. ARM defines NO_IRQ to -1, but OF code relies on IRQ domains support, which returns correct ('0') value in 'no irq' case. So everything should be fine. Other arches might break if some of their OF drivers rely on NO_IRQ being not 0. If so, the drivers must be fixed, finally. [ Rob Herring points out that microblaze should be fixed, and has posted a patch for testing for that. - Linus ] Signed-off-by: Anton Vorontsov Acked-by: Wolfram Sang Signed-off-by: Linus Torvalds --- drivers/of/irq.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) diff --git a/drivers/of/irq.c b/drivers/of/irq.c index 19c0115092dd..0f0cfa3bca30 100644 --- a/drivers/of/irq.c +++ b/drivers/of/irq.c @@ -26,11 +26,6 @@ #include #include -/* For archs that don't support NO_IRQ (such as x86), provide a dummy value */ -#ifndef NO_IRQ -#define NO_IRQ 0 -#endif - /** * irq_of_parse_and_map - Parse and map an interrupt into linux virq space * @device: Device node of the device whose interrupt is to be mapped @@ -44,7 +39,7 @@ unsigned int irq_of_parse_and_map(struct device_node *dev, int index) struct of_irq oirq; if (of_irq_map_one(dev, index, &oirq)) - return NO_IRQ; + return 0; return irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); @@ -345,7 +340,7 @@ int of_irq_to_resource(struct device_node *dev, int index, struct resource *r) /* Only dereference the resource if both the * resource and the irq are valid. */ - if (r && irq != NO_IRQ) { + if (r && irq) { r->start = r->end = irq; r->flags = IORESOURCE_IRQ; r->name = dev->full_name; @@ -363,7 +358,7 @@ int of_irq_count(struct device_node *dev) { int nr = 0; - while (of_irq_to_resource(dev, nr, NULL) != NO_IRQ) + while (of_irq_to_resource(dev, nr, NULL)) nr++; return nr; @@ -383,7 +378,7 @@ int of_irq_to_resource_table(struct device_node *dev, struct resource *res, int i; for (i = 0; i < nr_irqs; i++, res++) - if (of_irq_to_resource(dev, i, res) == NO_IRQ) + if (!of_irq_to_resource(dev, i, res)) break; return i; -- cgit v1.2.3-70-g09d2 From 81e759fbf7715514c32e563789db1d9d47fd55fb Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Tue, 15 Nov 2011 14:49:53 -0800 Subject: rbd: return an error when an invalid header is read This protects against opening future rbd images that have incompatible format changes. Signed-off-by: Josh Durgin --- drivers/block/rbd.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 65cc424359b0..a828c6a276a8 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -461,6 +461,10 @@ static int rbd_header_from_disk(struct rbd_image_header *header, u32 snap_count = le32_to_cpu(ondisk->snap_count); int ret = -ENOMEM; + if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) { + return -ENXIO; + } + init_rwsem(&header->snap_rwsem); header->snap_names_len = le64_to_cpu(ondisk->snap_names_len); header->snapc = kmalloc(sizeof(struct ceph_snap_context) + @@ -1610,8 +1614,13 @@ static int rbd_read_header(struct rbd_device *rbd_dev, goto out_dh; rc = rbd_header_from_disk(header, dh, snap_count, GFP_KERNEL); - if (rc < 0) + if (rc < 0) { + if (rc == -ENXIO) { + pr_warning("unrecognized header format" + " for image %s", rbd_dev->obj); + } goto out_dh; + } if (snap_count != header->total_snaps) { snap_count = header->total_snaps; -- cgit v1.2.3-70-g09d2 From 51703306b3b9ea7c05728040998521e47358147b Mon Sep 17 00:00:00 2001 From: Josh Durgin Date: Mon, 24 Oct 2011 16:28:27 -0700 Subject: rbd: remove buggy rollback functionality This doesn't interact with resizing well, since it doesn't set the size of the device to the size at the snapshot. It's also an expensive operation to be synchronous. Rollback can still be done with the userspace rbd tool. Signed-off-by: Josh Durgin --- Documentation/ABI/testing/sysfs-bus-rbd | 7 --- drivers/block/rbd.c | 90 --------------------------------- 2 files changed, 97 deletions(-) diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index fa72ccb2282e..dbedafb095e2 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -57,13 +57,6 @@ create_snap $ echo > /sys/bus/rbd/devices//snap_create -rollback_snap - - Rolls back data to the specified snapshot. This goes over the entire - list of rados blocks and sends a rollback command to each. - - $ echo > /sys/bus/rbd/devices//snap_rollback - snap_* A directory per each snapshot diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index a828c6a276a8..148ab944378d 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -183,10 +183,6 @@ static LIST_HEAD(rbd_client_list); /* clients */ static int __rbd_init_snaps_header(struct rbd_device *rbd_dev); static void rbd_dev_release(struct device *dev); -static ssize_t rbd_snap_rollback(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t size); static ssize_t rbd_snap_add(struct device *dev, struct device_attribute *attr, const char *buf, @@ -1359,32 +1355,6 @@ fail: return ret; } -/* - * Request sync osd rollback - */ -static int rbd_req_sync_rollback_obj(struct rbd_device *dev, - u64 snapid, - const char *obj) -{ - struct ceph_osd_req_op *ops; - int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_ROLLBACK, 0); - if (ret < 0) - return ret; - - ops[0].snap.snapid = snapid; - - ret = rbd_req_sync_op(dev, NULL, - CEPH_NOSNAP, - 0, - CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK, - ops, - 1, obj, 0, 0, NULL, NULL, NULL); - - rbd_destroy_ops(ops); - - return ret; -} - /* * Request sync osd read */ @@ -1891,7 +1861,6 @@ static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL); static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh); static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL); static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add); -static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback); static struct attribute *rbd_attrs[] = { &dev_attr_size.attr, @@ -1902,7 +1871,6 @@ static struct attribute *rbd_attrs[] = { &dev_attr_current_snap.attr, &dev_attr_refresh.attr, &dev_attr_create_snap.attr, - &dev_attr_rollback_snap.attr, NULL }; @@ -2433,64 +2401,6 @@ err_unlock: return ret; } -static ssize_t rbd_snap_rollback(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t count) -{ - struct rbd_device *rbd_dev = dev_to_rbd(dev); - int ret; - u64 snapid; - u64 cur_ofs; - char *seg_name = NULL; - char *snap_name = kmalloc(count + 1, GFP_KERNEL); - ret = -ENOMEM; - if (!snap_name) - return ret; - - /* parse snaps add command */ - snprintf(snap_name, count, "%s", buf); - seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO); - if (!seg_name) - goto done; - - mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING); - - ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL); - if (ret < 0) - goto done_unlock; - - dout("snapid=%lld\n", snapid); - - cur_ofs = 0; - while (cur_ofs < rbd_dev->header.image_size) { - cur_ofs += rbd_get_segment(&rbd_dev->header, - rbd_dev->obj, - cur_ofs, (u64)-1, - seg_name, NULL); - dout("seg_name=%s\n", seg_name); - - ret = rbd_req_sync_rollback_obj(rbd_dev, snapid, seg_name); - if (ret < 0) - pr_warning("could not roll back obj %s err=%d\n", - seg_name, ret); - } - - ret = __rbd_update_snaps(rbd_dev); - if (ret < 0) - goto done_unlock; - - ret = count; - -done_unlock: - mutex_unlock(&ctl_mutex); -done: - kfree(seg_name); - kfree(snap_name); - - return ret; -} - static struct bus_attribute rbd_bus_attrs[] = { __ATTR(add, S_IWUSR, NULL, rbd_add), __ATTR(remove, S_IWUSR, NULL, rbd_remove), -- cgit v1.2.3-70-g09d2 From be655596b3de5873f994ddbe205751a5ffb4de39 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 30 Nov 2011 09:47:09 -0800 Subject: ceph: use i_ceph_lock instead of i_lock We have been using i_lock to protect all kinds of data structures in the ceph_inode_info struct, including lists of inodes that we need to iterate over while avoiding races with inode destruction. That requires grabbing a reference to the inode with the list lock protected, but igrab() now takes i_lock to check the inode flags. Changing the list lock ordering would be a painful process. However, using a ceph-specific i_ceph_lock in the ceph inode instead of i_lock is a simple mechanical change and avoids the ordering constraints imposed by igrab(). Reported-by: Amon Ott Signed-off-by: Sage Weil --- fs/ceph/addr.c | 8 +-- fs/ceph/caps.c | 187 ++++++++++++++++++++++++++------------------------- fs/ceph/dir.c | 24 +++---- fs/ceph/file.c | 20 +++--- fs/ceph/inode.c | 53 ++++++++------- fs/ceph/ioctl.c | 4 +- fs/ceph/mds_client.c | 32 ++++----- fs/ceph/mds_client.h | 2 +- fs/ceph/snap.c | 16 ++--- fs/ceph/super.h | 31 ++++----- fs/ceph/xattr.c | 42 ++++++------ 11 files changed, 212 insertions(+), 207 deletions(-) diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c index 4144caf2f9d3..173b1d22e59b 100644 --- a/fs/ceph/addr.c +++ b/fs/ceph/addr.c @@ -87,7 +87,7 @@ static int ceph_set_page_dirty(struct page *page) snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context); /* dirty the head */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_head_snapc == NULL) ci->i_head_snapc = ceph_get_snap_context(snapc); ++ci->i_wrbuffer_ref_head; @@ -100,7 +100,7 @@ static int ceph_set_page_dirty(struct page *page) ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref_head-1, ci->i_wrbuffer_ref, ci->i_wrbuffer_ref_head, snapc, snapc->seq, snapc->num_snaps); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* now adjust page */ spin_lock_irq(&mapping->tree_lock); @@ -391,7 +391,7 @@ static struct ceph_snap_context *get_oldest_context(struct inode *inode, struct ceph_snap_context *snapc = NULL; struct ceph_cap_snap *capsnap = NULL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) { dout(" cap_snap %p snapc %p has %d dirty pages\n", capsnap, capsnap->context, capsnap->dirty_pages); @@ -407,7 +407,7 @@ static struct ceph_snap_context *get_oldest_context(struct inode *inode, dout(" head snapc %p has %d dirty pages\n", snapc, ci->i_wrbuffer_ref_head); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return snapc; } diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 0f327c6c9679..8b53193e4f7c 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -309,7 +309,7 @@ void ceph_reservation_status(struct ceph_fs_client *fsc, /* * Find ceph_cap for given mds, if any. * - * Called with i_lock held. + * Called with i_ceph_lock held. */ static struct ceph_cap *__get_cap_for_mds(struct ceph_inode_info *ci, int mds) { @@ -332,9 +332,9 @@ struct ceph_cap *ceph_get_cap_for_mds(struct ceph_inode_info *ci, int mds) { struct ceph_cap *cap; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ci, mds); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return cap; } @@ -361,15 +361,16 @@ static int __ceph_get_cap_mds(struct ceph_inode_info *ci) int ceph_get_cap_mds(struct inode *inode) { + struct ceph_inode_info *ci = ceph_inode(inode); int mds; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); mds = __ceph_get_cap_mds(ceph_inode(inode)); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return mds; } /* - * Called under i_lock. + * Called under i_ceph_lock. */ static void __insert_cap_node(struct ceph_inode_info *ci, struct ceph_cap *new) @@ -415,7 +416,7 @@ static void __cap_set_timeouts(struct ceph_mds_client *mdsc, * * If I_FLUSH is set, leave the inode at the front of the list. * - * Caller holds i_lock + * Caller holds i_ceph_lock * -> we take mdsc->cap_delay_lock */ static void __cap_delay_requeue(struct ceph_mds_client *mdsc, @@ -457,7 +458,7 @@ static void __cap_delay_requeue_front(struct ceph_mds_client *mdsc, /* * Cancel delayed work on cap. * - * Caller must hold i_lock. + * Caller must hold i_ceph_lock. */ static void __cap_delay_cancel(struct ceph_mds_client *mdsc, struct ceph_inode_info *ci) @@ -532,14 +533,14 @@ int ceph_add_cap(struct inode *inode, wanted |= ceph_caps_for_mode(fmode); retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ci, mds); if (!cap) { if (new_cap) { cap = new_cap; new_cap = NULL; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); new_cap = get_cap(mdsc, caps_reservation); if (new_cap == NULL) return -ENOMEM; @@ -625,7 +626,7 @@ retry: if (fmode >= 0) __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); wake_up_all(&ci->i_cap_wq); return 0; } @@ -792,7 +793,7 @@ int ceph_caps_revoking(struct ceph_inode_info *ci, int mask) struct rb_node *p; int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) { cap = rb_entry(p, struct ceph_cap, ci_node); if (__cap_is_valid(cap) && @@ -801,7 +802,7 @@ int ceph_caps_revoking(struct ceph_inode_info *ci, int mask) break; } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("ceph_caps_revoking %p %s = %d\n", inode, ceph_cap_string(mask), ret); return ret; @@ -855,7 +856,7 @@ int __ceph_caps_mds_wanted(struct ceph_inode_info *ci) } /* - * called under i_lock + * called under i_ceph_lock */ static int __ceph_is_any_caps(struct ceph_inode_info *ci) { @@ -865,7 +866,7 @@ static int __ceph_is_any_caps(struct ceph_inode_info *ci) /* * Remove a cap. Take steps to deal with a racing iterate_session_caps. * - * caller should hold i_lock. + * caller should hold i_ceph_lock. * caller will not hold session s_mutex if called from destroy_inode. */ void __ceph_remove_cap(struct ceph_cap *cap) @@ -1028,7 +1029,7 @@ static void __queue_cap_release(struct ceph_mds_session *session, /* * Queue cap releases when an inode is dropped from our cache. Since - * inode is about to be destroyed, there is no need for i_lock. + * inode is about to be destroyed, there is no need for i_ceph_lock. */ void ceph_queue_caps_release(struct inode *inode) { @@ -1049,7 +1050,7 @@ void ceph_queue_caps_release(struct inode *inode) /* * Send a cap msg on the given inode. Update our caps state, then - * drop i_lock and send the message. + * drop i_ceph_lock and send the message. * * Make note of max_size reported/requested from mds, revoked caps * that have now been implemented. @@ -1061,13 +1062,13 @@ void ceph_queue_caps_release(struct inode *inode) * Return non-zero if delayed release, or we experienced an error * such that the caller should requeue + retry later. * - * called with i_lock, then drops it. + * called with i_ceph_lock, then drops it. * caller should hold snap_rwsem (read), s_mutex. */ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, int op, int used, int want, int retain, int flushing, unsigned *pflush_tid) - __releases(cap->ci->vfs_inode->i_lock) + __releases(cap->ci->i_ceph_lock) { struct ceph_inode_info *ci = cap->ci; struct inode *inode = &ci->vfs_inode; @@ -1170,7 +1171,7 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, xattr_version = ci->i_xattrs.version; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ret = send_cap_msg(session, ceph_vino(inode).ino, cap_id, op, keep, want, flushing, seq, flush_tid, issue_seq, mseq, @@ -1198,13 +1199,13 @@ static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap, * Unless @again is true, skip cap_snaps that were already sent to * the MDS (i.e., during this session). * - * Called under i_lock. Takes s_mutex as needed. + * Called under i_ceph_lock. Takes s_mutex as needed. */ void __ceph_flush_snaps(struct ceph_inode_info *ci, struct ceph_mds_session **psession, int again) - __releases(ci->vfs_inode->i_lock) - __acquires(ci->vfs_inode->i_lock) + __releases(ci->i_ceph_lock) + __acquires(ci->i_ceph_lock) { struct inode *inode = &ci->vfs_inode; int mds; @@ -1261,7 +1262,7 @@ retry: session = NULL; } if (!session) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); mutex_lock(&mdsc->mutex); session = __ceph_lookup_mds_session(mdsc, mds); mutex_unlock(&mdsc->mutex); @@ -1275,7 +1276,7 @@ retry: * deletion or migration. retry, and we'll * get a better @mds value next time. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); goto retry; } @@ -1285,7 +1286,7 @@ retry: list_del_init(&capsnap->flushing_item); list_add_tail(&capsnap->flushing_item, &session->s_cap_snaps_flushing); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("flush_snaps %p cap_snap %p follows %lld tid %llu\n", inode, capsnap, capsnap->follows, capsnap->flush_tid); @@ -1302,7 +1303,7 @@ retry: next_follows = capsnap->follows + 1; ceph_put_cap_snap(capsnap); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); goto retry; } @@ -1322,11 +1323,9 @@ out: static void ceph_flush_snaps(struct ceph_inode_info *ci) { - struct inode *inode = &ci->vfs_inode; - - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_flush_snaps(ci, NULL, 0); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -1373,7 +1372,7 @@ int __ceph_mark_dirty_caps(struct ceph_inode_info *ci, int mask) * Add dirty inode to the flushing list. Assigned a seq number so we * can wait for caps to flush without starving. * - * Called under i_lock. + * Called under i_ceph_lock. */ static int __mark_caps_flushing(struct inode *inode, struct ceph_mds_session *session) @@ -1421,9 +1420,9 @@ static int try_nonblocking_invalidate(struct inode *inode) struct ceph_inode_info *ci = ceph_inode(inode); u32 invalidating_gen = ci->i_rdcache_gen; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); invalidate_mapping_pages(&inode->i_data, 0, -1); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (inode->i_data.nrpages == 0 && invalidating_gen == ci->i_rdcache_gen) { @@ -1470,7 +1469,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags, if (mdsc->stopping) is_delayed = 1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_ceph_flags & CEPH_I_FLUSH) flags |= CHECK_CAPS_FLUSH; @@ -1480,7 +1479,7 @@ void ceph_check_caps(struct ceph_inode_info *ci, int flags, __ceph_flush_snaps(ci, &session, 0); goto retry_locked; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); retry_locked: file_wanted = __ceph_caps_file_wanted(ci); used = __ceph_caps_used(ci); @@ -1634,7 +1633,7 @@ ack: if (mutex_trylock(&session->s_mutex) == 0) { dout("inverting session/ino locks on %p\n", session); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (took_snap_rwsem) { up_read(&mdsc->snap_rwsem); took_snap_rwsem = 0; @@ -1648,7 +1647,7 @@ ack: if (down_read_trylock(&mdsc->snap_rwsem) == 0) { dout("inverting snap/in locks on %p\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); down_read(&mdsc->snap_rwsem); took_snap_rwsem = 1; goto retry; @@ -1664,10 +1663,10 @@ ack: mds = cap->mds; /* remember mds, so we don't repeat */ sent++; - /* __send_cap drops i_lock */ + /* __send_cap drops i_ceph_lock */ delayed += __send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, used, want, retain, flushing, NULL); - goto retry; /* retake i_lock and restart our cap scan. */ + goto retry; /* retake i_ceph_lock and restart our cap scan. */ } /* @@ -1681,7 +1680,7 @@ ack: else if (!is_delayed || force_requeue) __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (queue_invalidate) ceph_queue_invalidate(inode); @@ -1704,7 +1703,7 @@ static int try_flush_caps(struct inode *inode, struct ceph_mds_session *session, int flushing = 0; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_ceph_flags & CEPH_I_NOFLUSH) { dout("try_flush_caps skipping %p I_NOFLUSH set\n", inode); goto out; @@ -1716,7 +1715,7 @@ retry: int delayed; if (!session) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); session = cap->session; mutex_lock(&session->s_mutex); goto retry; @@ -1727,18 +1726,18 @@ retry: flushing = __mark_caps_flushing(inode, session); - /* __send_cap drops i_lock */ + /* __send_cap drops i_ceph_lock */ delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, used, want, cap->issued | cap->implemented, flushing, flush_tid); if (!delayed) goto out_unlocked; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); out_unlocked: if (session && unlock_session) mutex_unlock(&session->s_mutex); @@ -1753,7 +1752,7 @@ static int caps_are_flushed(struct inode *inode, unsigned tid) struct ceph_inode_info *ci = ceph_inode(inode); int i, ret = 1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); for (i = 0; i < CEPH_CAP_BITS; i++) if ((ci->i_flushing_caps & (1 << i)) && ci->i_cap_flush_tid[i] <= tid) { @@ -1761,7 +1760,7 @@ static int caps_are_flushed(struct inode *inode, unsigned tid) ret = 0; break; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -1868,10 +1867,10 @@ int ceph_write_inode(struct inode *inode, struct writeback_control *wbc) struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (__ceph_caps_dirty(ci)) __cap_delay_requeue_front(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } return err; } @@ -1894,7 +1893,7 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, struct inode *inode = &ci->vfs_inode; struct ceph_cap *cap; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; if (cap && cap->session == session) { dout("kick_flushing_caps %p cap %p capsnap %p\n", inode, @@ -1904,7 +1903,7 @@ static void kick_flushing_capsnaps(struct ceph_mds_client *mdsc, pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } @@ -1921,7 +1920,7 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc, struct ceph_cap *cap; int delayed = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; if (cap && cap->session == session) { dout("kick_flushing_caps %p cap %p %s\n", inode, @@ -1932,14 +1931,14 @@ void ceph_kick_flushing_caps(struct ceph_mds_client *mdsc, cap->issued | cap->implemented, ci->i_flushing_caps, NULL); if (delayed) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else { pr_err("%p auth cap %p not mds%d ???\n", inode, cap, session->s_mds); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } } @@ -1952,7 +1951,7 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, struct ceph_cap *cap; int delayed = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = ci->i_auth_cap; dout("kick_flushing_inode_caps %p flushing %s flush_seq %lld\n", inode, ceph_cap_string(ci->i_flushing_caps), ci->i_cap_flush_seq); @@ -1964,12 +1963,12 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, cap->issued | cap->implemented, ci->i_flushing_caps, NULL); if (delayed) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __cap_delay_requeue(mdsc, ci); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } @@ -1978,7 +1977,7 @@ static void kick_flushing_inode_caps(struct ceph_mds_client *mdsc, * Take references to capabilities we hold, so that we don't release * them to the MDS prematurely. * - * Protected by i_lock. + * Protected by i_ceph_lock. */ static void __take_cap_refs(struct ceph_inode_info *ci, int got) { @@ -2016,7 +2015,7 @@ static int try_get_cap_refs(struct ceph_inode_info *ci, int need, int want, dout("get_cap_refs %p need %s want %s\n", inode, ceph_cap_string(need), ceph_cap_string(want)); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* make sure file is actually open */ file_wanted = __ceph_caps_file_wanted(ci); @@ -2077,7 +2076,7 @@ static int try_get_cap_refs(struct ceph_inode_info *ci, int need, int want, ceph_cap_string(have), ceph_cap_string(need)); } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("get_cap_refs %p ret %d got %s\n", inode, ret, ceph_cap_string(*got)); return ret; @@ -2094,7 +2093,7 @@ static void check_max_size(struct inode *inode, loff_t endoff) int check = 0; /* do we need to explicitly request a larger max_size? */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if ((endoff >= ci->i_max_size || endoff > (inode->i_size << 1)) && endoff > ci->i_wanted_max_size) { @@ -2103,7 +2102,7 @@ static void check_max_size(struct inode *inode, loff_t endoff) ci->i_wanted_max_size = endoff; check = 1; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (check) ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); } @@ -2140,9 +2139,9 @@ retry: */ void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps) { - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); __take_cap_refs(ci, caps); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2160,7 +2159,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had) int last = 0, put = 0, flushsnaps = 0, wake = 0; struct ceph_cap_snap *capsnap; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (had & CEPH_CAP_PIN) --ci->i_pin_ref; if (had & CEPH_CAP_FILE_RD) @@ -2193,7 +2192,7 @@ void ceph_put_cap_refs(struct ceph_inode_info *ci, int had) } } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("put_cap_refs %p had %s%s%s\n", inode, ceph_cap_string(had), last ? " last" : "", put ? " put" : ""); @@ -2225,7 +2224,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, int found = 0; struct ceph_cap_snap *capsnap = NULL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_wrbuffer_ref -= nr; last = !ci->i_wrbuffer_ref; @@ -2274,7 +2273,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (last) { ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); @@ -2291,7 +2290,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr, * Handle a cap GRANT message from the MDS. (Note that a GRANT may * actually be a revocation if it specifies a smaller cap set.) * - * caller holds s_mutex and i_lock, we drop both. + * caller holds s_mutex and i_ceph_lock, we drop both. * * return value: * 0 - ok @@ -2302,7 +2301,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, struct ceph_mds_session *session, struct ceph_cap *cap, struct ceph_buffer *xattr_buf) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); int mds = session->s_mds; @@ -2453,7 +2452,7 @@ static void handle_cap_grant(struct inode *inode, struct ceph_mds_caps *grant, } BUG_ON(cap->issued & ~cap->implemented); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (writeback) /* * queue inode for writeback: we can't actually call @@ -2483,7 +2482,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid, struct ceph_mds_caps *m, struct ceph_mds_session *session, struct ceph_cap *cap) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc; @@ -2539,7 +2538,7 @@ static void handle_cap_flush_ack(struct inode *inode, u64 flush_tid, wake_up_all(&ci->i_cap_wq); out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (drop) iput(inode); } @@ -2562,7 +2561,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, dout("handle_cap_flushsnap_ack inode %p ci %p mds%d follows %lld\n", inode, ci, session->s_mds, follows); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) { if (capsnap->follows == follows) { if (capsnap->flush_tid != flush_tid) { @@ -2585,7 +2584,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, capsnap, capsnap->follows); } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (drop) iput(inode); } @@ -2598,7 +2597,7 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid, static void handle_cap_trunc(struct inode *inode, struct ceph_mds_caps *trunc, struct ceph_mds_session *session) - __releases(inode->i_lock) + __releases(ci->i_ceph_lock) { struct ceph_inode_info *ci = ceph_inode(inode); int mds = session->s_mds; @@ -2617,7 +2616,7 @@ static void handle_cap_trunc(struct inode *inode, inode, mds, seq, truncate_size, truncate_seq); queue_trunc = ceph_fill_file_size(inode, issued, truncate_seq, truncate_size, size); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (queue_trunc) ceph_queue_vmtruncate(inode); @@ -2646,7 +2645,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex, dout("handle_cap_export inode %p ci %p mds%d mseq %d\n", inode, ci, mds, mseq); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* make sure we haven't seen a higher mseq */ for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) { @@ -2690,7 +2689,7 @@ static void handle_cap_export(struct inode *inode, struct ceph_mds_caps *ex, } /* else, we already released it */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2745,9 +2744,9 @@ static void handle_cap_import(struct ceph_mds_client *mdsc, up_read(&mdsc->snap_rwsem); /* make sure we re-request max_size, if necessary */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_requested_max_size = 0; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -2762,6 +2761,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, struct ceph_mds_client *mdsc = session->s_mdsc; struct super_block *sb = mdsc->fsc->sb; struct inode *inode; + struct ceph_inode_info *ci; struct ceph_cap *cap; struct ceph_mds_caps *h; int mds = session->s_mds; @@ -2815,6 +2815,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, /* lookup ino */ inode = ceph_find_inode(sb, vino); + ci = ceph_inode(inode); dout(" op %s ino %llx.%llx inode %p\n", ceph_cap_op_name(op), vino.ino, vino.snap, inode); if (!inode) { @@ -2844,16 +2845,16 @@ void ceph_handle_caps(struct ceph_mds_session *session, } /* the rest require a cap */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = __get_cap_for_mds(ceph_inode(inode), mds); if (!cap) { dout(" no cap on %p ino %llx.%llx from mds%d\n", inode, ceph_ino(inode), ceph_snap(inode), mds); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto flush_cap_releases; } - /* note that each of these drops i_lock for us */ + /* note that each of these drops i_ceph_lock for us */ switch (op) { case CEPH_CAP_OP_REVOKE: case CEPH_CAP_OP_GRANT: @@ -2869,7 +2870,7 @@ void ceph_handle_caps(struct ceph_mds_session *session, break; default: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); pr_err("ceph_handle_caps: unknown cap op %d %s\n", op, ceph_cap_op_name(op)); } @@ -2962,13 +2963,13 @@ void ceph_put_fmode(struct ceph_inode_info *ci, int fmode) struct inode *inode = &ci->vfs_inode; int last = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("put_fmode %p fmode %d %d -> %d\n", inode, fmode, ci->i_nr_by_mode[fmode], ci->i_nr_by_mode[fmode]-1); BUG_ON(ci->i_nr_by_mode[fmode] == 0); if (--ci->i_nr_by_mode[fmode] == 0) last++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (last && ci->i_vino.snap == CEPH_NOSNAP) ceph_check_caps(ci, 0, NULL); @@ -2991,7 +2992,7 @@ int ceph_encode_inode_release(void **p, struct inode *inode, int used, dirty; int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); used = __ceph_caps_used(ci); dirty = __ceph_caps_dirty(ci); @@ -3046,7 +3047,7 @@ int ceph_encode_inode_release(void **p, struct inode *inode, inode, cap, ceph_cap_string(cap->issued)); } } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -3061,7 +3062,7 @@ int ceph_encode_dentry_release(void **p, struct dentry *dentry, /* * force an record for the directory caps if we have a dentry lease. - * this is racy (can't take i_lock and d_lock together), but it + * this is racy (can't take i_ceph_lock and d_lock together), but it * doesn't have to be perfect; the mds will revoke anything we don't * release. */ diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c index bca3948e9dbf..3eeb97661262 100644 --- a/fs/ceph/dir.c +++ b/fs/ceph/dir.c @@ -281,18 +281,18 @@ static int ceph_readdir(struct file *filp, void *dirent, filldir_t filldir) } /* can we use the dcache? */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if ((filp->f_pos == 2 || fi->dentry) && !ceph_test_mount_opt(fsc, NOASYNCREADDIR) && ceph_snap(inode) != CEPH_SNAPDIR && ceph_dir_test_complete(inode) && __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = __dcache_readdir(filp, dirent, filldir); if (err != -EAGAIN) return err; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } if (fi->dentry) { err = note_last_dentry(fi, fi->dentry->d_name.name, @@ -428,12 +428,12 @@ more: * were released during the whole readdir, and we should have * the complete dir contents in our cache. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_release_count == fi->dir_release_count) { ceph_dir_set_complete(inode); ci->i_max_offset = filp->f_pos; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("readdir %p filp %p done.\n", inode, filp); return 0; @@ -607,7 +607,7 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry, struct ceph_inode_info *ci = ceph_inode(dir); struct ceph_dentry_info *di = ceph_dentry(dentry); - spin_lock(&dir->i_lock); + spin_lock(&ci->i_ceph_lock); dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags); if (strncmp(dentry->d_name.name, fsc->mount_options->snapdir_name, @@ -615,13 +615,13 @@ static struct dentry *ceph_lookup(struct inode *dir, struct dentry *dentry, !is_root_ceph_dentry(dir, dentry) && ceph_dir_test_complete(dir) && (__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) { - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); dout(" dir %p complete, -ENOENT\n", dir); d_add(dentry, NULL); di->lease_shared_gen = ci->i_shared_gen; return NULL; } - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); } op = ceph_snap(dir) == CEPH_SNAPDIR ? @@ -841,12 +841,12 @@ static int drop_caps_for_unlink(struct inode *inode) struct ceph_inode_info *ci = ceph_inode(inode); int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (inode->i_nlink == 1) { drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN); ci->i_ceph_flags |= CEPH_I_NODELAY; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return drop; } @@ -1015,10 +1015,10 @@ static int dir_lease_is_valid(struct inode *dir, struct dentry *dentry) struct ceph_dentry_info *di = ceph_dentry(dentry); int valid = 0; - spin_lock(&dir->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_shared_gen == di->lease_shared_gen) valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1); - spin_unlock(&dir->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n", dir, (unsigned)ci->i_shared_gen, dentry, (unsigned)di->lease_shared_gen, valid); diff --git a/fs/ceph/file.c b/fs/ceph/file.c index ce549d31eeb7..af187330cc89 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -147,9 +147,9 @@ int ceph_open(struct inode *inode, struct file *file) /* trivially open snapdir */ if (ceph_snap(inode) == CEPH_SNAPDIR) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ceph_init_file(inode, file, fmode); } @@ -158,7 +158,7 @@ int ceph_open(struct inode *inode, struct file *file) * write) or any MDS (for read). Update wanted set * asynchronously. */ - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (__ceph_is_any_real_caps(ci) && (((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) { int mds_wanted = __ceph_caps_mds_wanted(ci); @@ -168,7 +168,7 @@ int ceph_open(struct inode *inode, struct file *file) inode, fmode, ceph_cap_string(wanted), ceph_cap_string(issued)); __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* adjust wanted? */ if ((issued & wanted) != wanted && @@ -180,10 +180,10 @@ int ceph_open(struct inode *inode, struct file *file) } else if (ceph_snap(inode) != CEPH_NOSNAP && (ci->i_snap_caps & wanted) == wanted) { __ceph_get_fmode(ci, fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ceph_init_file(inode, file, fmode); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("open fmode %d wants %s\n", fmode, ceph_cap_string(wanted)); req = prepare_open_request(inode->i_sb, flags, 0); @@ -743,9 +743,9 @@ retry_snap: */ int dirty; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_put_cap_refs(ci, got); ret = generic_file_aio_write(iocb, iov, nr_segs, pos); @@ -764,9 +764,9 @@ retry_snap: if (ret >= 0) { int dirty; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); } diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 116f36502f17..87fb132fb330 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -297,6 +297,8 @@ struct inode *ceph_alloc_inode(struct super_block *sb) dout("alloc_inode %p\n", &ci->vfs_inode); + spin_lock_init(&ci->i_ceph_lock); + ci->i_version = 0; ci->i_time_warp_seq = 0; ci->i_ceph_flags = 0; @@ -583,7 +585,7 @@ static int fill_inode(struct inode *inode, iinfo->xattr_len); } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); /* * provided version will be odd if inode value is projected, @@ -680,7 +682,7 @@ static int fill_inode(struct inode *inode, char *sym; BUG_ON(symlen != inode->i_size); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = -ENOMEM; sym = kmalloc(symlen+1, GFP_NOFS); @@ -689,7 +691,7 @@ static int fill_inode(struct inode *inode, memcpy(sym, iinfo->symlink, symlen); sym[symlen] = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ci->i_symlink) ci->i_symlink = sym; else @@ -715,7 +717,7 @@ static int fill_inode(struct inode *inode, } no_change: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* queue truncate if we saw i_size decrease */ if (queue_trunc) @@ -750,13 +752,13 @@ no_change: info->cap.flags, caps_reservation); } else { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout(" %p got snap_caps %s\n", inode, ceph_cap_string(le32_to_cpu(info->cap.caps))); ci->i_snap_caps |= le32_to_cpu(info->cap.caps); if (cap_fmode >= 0) __ceph_get_fmode(ci, cap_fmode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } } else if (cap_fmode >= 0) { pr_warning("mds issued no caps on %llx.%llx\n", @@ -849,19 +851,20 @@ static void ceph_set_dentry_offset(struct dentry *dn) { struct dentry *dir = dn->d_parent; struct inode *inode = dir->d_inode; + struct ceph_inode_info *ci = ceph_inode(inode); struct ceph_dentry_info *di; BUG_ON(!inode); di = ceph_dentry(dn); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ceph_dir_test_complete(inode)) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return; } di->offset = ceph_inode(inode)->i_max_offset++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); spin_lock(&dir->d_lock); spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED); @@ -1308,7 +1311,7 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) struct ceph_inode_info *ci = ceph_inode(inode); int ret = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("set_size %p %llu -> %llu\n", inode, inode->i_size, size); inode->i_size = size; inode->i_blocks = (size + (1 << 9) - 1) >> 9; @@ -1318,7 +1321,7 @@ int ceph_inode_set_size(struct inode *inode, loff_t size) (ci->i_reported_size << 1) < ci->i_max_size) ret = 1; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return ret; } @@ -1376,20 +1379,20 @@ static void ceph_invalidate_work(struct work_struct *work) u32 orig_gen; int check = 0; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("invalidate_pages %p gen %d revoking %d\n", inode, ci->i_rdcache_gen, ci->i_rdcache_revoking); if (ci->i_rdcache_revoking != ci->i_rdcache_gen) { /* nevermind! */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto out; } orig_gen = ci->i_rdcache_gen; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); truncate_inode_pages(&inode->i_data, 0); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (orig_gen == ci->i_rdcache_gen && orig_gen == ci->i_rdcache_revoking) { dout("invalidate_pages %p gen %d successful\n", inode, @@ -1401,7 +1404,7 @@ static void ceph_invalidate_work(struct work_struct *work) inode, orig_gen, ci->i_rdcache_gen, ci->i_rdcache_revoking); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (check) ceph_check_caps(ci, 0, NULL); @@ -1460,10 +1463,10 @@ void __ceph_do_pending_vmtruncate(struct inode *inode) int wrbuffer_refs, wake = 0; retry: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_truncate_pending == 0) { dout("__do_pending_vmtruncate %p none pending\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return; } @@ -1474,7 +1477,7 @@ retry: if (ci->i_wrbuffer_ref_head < ci->i_wrbuffer_ref) { dout("__do_pending_vmtruncate %p flushing snaps first\n", inode); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); filemap_write_and_wait_range(&inode->i_data, 0, inode->i_sb->s_maxbytes); goto retry; @@ -1484,15 +1487,15 @@ retry: wrbuffer_refs = ci->i_wrbuffer_ref; dout("__do_pending_vmtruncate %p (%d) to %lld\n", inode, ci->i_truncate_pending, to); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); truncate_inode_pages(inode->i_mapping, to); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_truncate_pending--; if (ci->i_truncate_pending == 0) wake = 1; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (wrbuffer_refs == 0) ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL); @@ -1547,7 +1550,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) if (IS_ERR(req)) return PTR_ERR(req); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); issued = __ceph_caps_issued(ci, NULL); dout("setattr %p issued %s\n", inode, ceph_cap_string(issued)); @@ -1695,7 +1698,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) } release &= issued; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (inode_dirty_flags) __mark_inode_dirty(inode, inode_dirty_flags); @@ -1717,7 +1720,7 @@ int ceph_setattr(struct dentry *dentry, struct iattr *attr) __ceph_do_pending_vmtruncate(inode); return err; out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_mdsc_put_request(req); return err; } diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c index 5a14c29cbba6..790914a598dd 100644 --- a/fs/ceph/ioctl.c +++ b/fs/ceph/ioctl.c @@ -241,11 +241,11 @@ static long ceph_ioctl_lazyio(struct file *file) struct ceph_inode_info *ci = ceph_inode(inode); if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_nr_by_mode[fi->fmode]--; fi->fmode |= CEPH_FILE_MODE_LAZY; ci->i_nr_by_mode[fi->fmode]++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout("ioctl_layzio: file %p marked lazy\n", file); ceph_check_caps(ci, 0, NULL); diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 264ab701154f..34bc35084ae3 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -732,21 +732,21 @@ static int __choose_mds(struct ceph_mds_client *mdsc, } } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap = NULL; if (mode == USE_AUTH_MDS) cap = ci->i_auth_cap; if (!cap && !RB_EMPTY_ROOT(&ci->i_caps)) cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node); if (!cap) { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); goto random; } mds = cap->session->s_mds; dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n", inode, ceph_vinop(inode), mds, cap == ci->i_auth_cap ? "auth " : "", cap); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return mds; random: @@ -951,7 +951,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, dout("removing cap %p, ci is %p, inode is %p\n", cap, ci, &ci->vfs_inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_remove_cap(cap); if (!__ceph_is_any_real_caps(ci)) { struct ceph_mds_client *mdsc = @@ -984,7 +984,7 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap, } spin_unlock(&mdsc->cap_dirty_lock); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); while (drop--) iput(inode); return 0; @@ -1015,10 +1015,10 @@ static int wake_up_session_cb(struct inode *inode, struct ceph_cap *cap, wake_up_all(&ci->i_cap_wq); if (arg) { - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_wanted_max_size = 0; ci->i_requested_max_size = 0; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } return 0; } @@ -1151,7 +1151,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) if (session->s_trim_caps <= 0) return -1; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); mine = cap->issued | cap->implemented; used = __ceph_caps_used(ci); oissued = __ceph_caps_issued_other(ci, cap); @@ -1170,7 +1170,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) __ceph_remove_cap(cap); } else { /* try to drop referring dentries */ - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); d_prune_aliases(inode); dout("trim_caps_cb %p cap %p pruned, count now %d\n", inode, cap, atomic_read(&inode->i_count)); @@ -1178,7 +1178,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg) } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return 0; } @@ -1296,7 +1296,7 @@ static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq) i_flushing_item); struct inode *inode = &ci->vfs_inode; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_cap_flush_seq <= want_flush_seq) { dout("check_cap_flush still flushing %p " "seq %lld <= %lld to mds%d\n", inode, @@ -1304,7 +1304,7 @@ static int check_cap_flush(struct ceph_mds_client *mdsc, u64 want_flush_seq) session->s_mds); ret = 0; } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } mutex_unlock(&session->s_mutex); ceph_put_mds_session(session); @@ -2011,10 +2011,10 @@ void ceph_invalidate_dir_request(struct ceph_mds_request *req) struct ceph_inode_info *ci = ceph_inode(inode); dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ceph_dir_clear_complete(inode); ci->i_release_count++; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (req->r_dentry) ceph_invalidate_dentry_lease(req->r_dentry); @@ -2422,7 +2422,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, if (err) goto out_free; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); cap->seq = 0; /* reset cap seq */ cap->issue_seq = 0; /* and issue_seq */ @@ -2445,7 +2445,7 @@ static int encode_caps_cb(struct inode *inode, struct ceph_cap *cap, rec.v1.pathbase = cpu_to_le64(pathbase); reclen = sizeof(rec.v1); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (recon_state->flock) { int num_fcntl_locks, num_flock_locks; diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h index 4bb239921dbd..a50ca0e39475 100644 --- a/fs/ceph/mds_client.h +++ b/fs/ceph/mds_client.h @@ -20,7 +20,7 @@ * * mdsc->snap_rwsem * - * inode->i_lock + * ci->i_ceph_lock * mdsc->snap_flush_lock * mdsc->cap_delay_lock * diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index e26437191333..a559c80f127a 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -446,7 +446,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) return; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); used = __ceph_caps_used(ci); dirty = __ceph_caps_dirty(ci); @@ -528,7 +528,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) kfree(capsnap); } - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } /* @@ -537,7 +537,7 @@ void ceph_queue_cap_snap(struct ceph_inode_info *ci) * * If capsnap can now be flushed, add to snap_flush list, and return 1. * - * Caller must hold i_lock. + * Caller must hold i_ceph_lock. */ int __ceph_finish_cap_snap(struct ceph_inode_info *ci, struct ceph_cap_snap *capsnap) @@ -739,9 +739,9 @@ static void flush_snaps(struct ceph_mds_client *mdsc) inode = &ci->vfs_inode; ihold(inode); spin_unlock(&mdsc->snap_flush_lock); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __ceph_flush_snaps(ci, &session, 0); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); iput(inode); spin_lock(&mdsc->snap_flush_lock); } @@ -847,7 +847,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, continue; ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (!ci->i_snap_realm) goto skip_inode; /* @@ -876,7 +876,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, oldrealm = ci->i_snap_realm; ci->i_snap_realm = realm; spin_unlock(&realm->inodes_with_caps_lock); - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); ceph_get_snap_realm(mdsc, realm); ceph_put_snap_realm(mdsc, oldrealm); @@ -885,7 +885,7 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc, continue; skip_inode: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); iput(inode); } diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 01bf189e08a9..edcbf3774a56 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -220,7 +220,7 @@ struct ceph_dentry_info { * The locking for D_COMPLETE is a bit odd: * - we can clear it at almost any time (see ceph_d_prune) * - it is only meaningful if: - * - we hold dir inode i_lock + * - we hold dir inode i_ceph_lock * - we hold dir FILE_SHARED caps * - the dentry D_COMPLETE is set */ @@ -250,6 +250,8 @@ struct ceph_inode_xattrs_info { struct ceph_inode_info { struct ceph_vino i_vino; /* ceph ino + snap */ + spinlock_t i_ceph_lock; + u64 i_version; u32 i_time_warp_seq; @@ -271,7 +273,7 @@ struct ceph_inode_info { struct ceph_inode_xattrs_info i_xattrs; - /* capabilities. protected _both_ by i_lock and cap->session's + /* capabilities. protected _both_ by i_ceph_lock and cap->session's * s_mutex. */ struct rb_root i_caps; /* cap list */ struct ceph_cap *i_auth_cap; /* authoritative cap, if any */ @@ -437,18 +439,18 @@ static inline void ceph_i_clear(struct inode *inode, unsigned mask) { struct ceph_inode_info *ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_ceph_flags &= ~mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } static inline void ceph_i_set(struct inode *inode, unsigned mask) { struct ceph_inode_info *ci = ceph_inode(inode); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); ci->i_ceph_flags |= mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); } static inline bool ceph_i_test(struct inode *inode, unsigned mask) @@ -456,9 +458,9 @@ static inline bool ceph_i_test(struct inode *inode, unsigned mask) struct ceph_inode_info *ci = ceph_inode(inode); bool r; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); r = (ci->i_ceph_flags & mask) == mask; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return r; } @@ -508,9 +510,9 @@ extern int __ceph_caps_issued_other(struct ceph_inode_info *ci, static inline int ceph_caps_issued(struct ceph_inode_info *ci) { int issued; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); issued = __ceph_caps_issued(ci, NULL); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return issued; } @@ -518,9 +520,9 @@ static inline int ceph_caps_issued_mask(struct ceph_inode_info *ci, int mask, int touch) { int r; - spin_lock(&ci->vfs_inode.i_lock); + spin_lock(&ci->i_ceph_lock); r = __ceph_caps_issued_mask(ci, mask, touch); - spin_unlock(&ci->vfs_inode.i_lock); + spin_unlock(&ci->i_ceph_lock); return r; } @@ -743,10 +745,9 @@ extern int ceph_add_cap(struct inode *inode, extern void __ceph_remove_cap(struct ceph_cap *cap); static inline void ceph_remove_cap(struct ceph_cap *cap) { - struct inode *inode = &cap->ci->vfs_inode; - spin_lock(&inode->i_lock); + spin_lock(&cap->ci->i_ceph_lock); __ceph_remove_cap(cap); - spin_unlock(&inode->i_lock); + spin_unlock(&cap->ci->i_ceph_lock); } extern void ceph_put_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap); diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c index 96c6739a0280..a5e36e4488a7 100644 --- a/fs/ceph/xattr.c +++ b/fs/ceph/xattr.c @@ -343,8 +343,8 @@ void __ceph_destroy_xattrs(struct ceph_inode_info *ci) } static int __build_xattrs(struct inode *inode) - __releases(inode->i_lock) - __acquires(inode->i_lock) + __releases(ci->i_ceph_lock) + __acquires(ci->i_ceph_lock) { u32 namelen; u32 numattr = 0; @@ -372,7 +372,7 @@ start: end = p + ci->i_xattrs.blob->vec.iov_len; ceph_decode_32_safe(&p, end, numattr, bad); xattr_version = ci->i_xattrs.version; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); xattrs = kcalloc(numattr, sizeof(struct ceph_xattr *), GFP_NOFS); @@ -387,7 +387,7 @@ start: goto bad_lock; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_xattrs.version != xattr_version) { /* lost a race, retry */ for (i = 0; i < numattr; i++) @@ -418,7 +418,7 @@ start: return err; bad_lock: - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); bad: if (xattrs) { for (i = 0; i < numattr; i++) @@ -512,7 +512,7 @@ ssize_t ceph_getxattr(struct dentry *dentry, const char *name, void *value, if (vxattrs) vxattr = ceph_match_vxattr(vxattrs, name); - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("getxattr %p ver=%lld index_ver=%lld\n", inode, ci->i_xattrs.version, ci->i_xattrs.index_version); @@ -520,14 +520,14 @@ ssize_t ceph_getxattr(struct dentry *dentry, const char *name, void *value, (ci->i_xattrs.index_version >= ci->i_xattrs.version)) { goto get_xattr; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); /* get xattrs from mds (if we don't already have them) */ err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR); if (err) return err; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (vxattr && vxattr->readonly) { err = vxattr->getxattr_cb(ci, value, size); @@ -558,7 +558,7 @@ get_xattr: memcpy(value, xattr->val, xattr->val_len); out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return err; } @@ -573,7 +573,7 @@ ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size) u32 len; int i; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); dout("listxattr %p ver=%lld index_ver=%lld\n", inode, ci->i_xattrs.version, ci->i_xattrs.index_version); @@ -581,13 +581,13 @@ ssize_t ceph_listxattr(struct dentry *dentry, char *names, size_t size) (ci->i_xattrs.index_version >= ci->i_xattrs.version)) { goto list_xattr; } else { - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR); if (err) return err; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); err = __build_xattrs(inode); if (err < 0) @@ -619,7 +619,7 @@ list_xattr: } out: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); return err; } @@ -739,7 +739,7 @@ int ceph_setxattr(struct dentry *dentry, const char *name, if (!xattr) goto out; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); retry: issued = __ceph_caps_issued(ci, NULL); if (!(issued & CEPH_CAP_XATTR_EXCL)) @@ -752,12 +752,12 @@ retry: required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) { struct ceph_buffer *blob = NULL; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); dout(" preaallocating new blob size=%d\n", required_blob_size); blob = ceph_buffer_new(required_blob_size, GFP_NOFS); if (!blob) goto out; - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); if (ci->i_xattrs.prealloc_blob) ceph_buffer_put(ci->i_xattrs.prealloc_blob); ci->i_xattrs.prealloc_blob = blob; @@ -770,13 +770,13 @@ retry: dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL); ci->i_xattrs.dirty = true; inode->i_ctime = CURRENT_TIME; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); return err; do_sync: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_sync_setxattr(dentry, name, value, size, flags); out: kfree(newname); @@ -833,7 +833,7 @@ int ceph_removexattr(struct dentry *dentry, const char *name) return -EOPNOTSUPP; } - spin_lock(&inode->i_lock); + spin_lock(&ci->i_ceph_lock); __build_xattrs(inode); issued = __ceph_caps_issued(ci, NULL); dout("removexattr %p issued %s\n", inode, ceph_cap_string(issued)); @@ -846,12 +846,12 @@ int ceph_removexattr(struct dentry *dentry, const char *name) ci->i_xattrs.dirty = true; inode->i_ctime = CURRENT_TIME; - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); if (dirty) __mark_inode_dirty(inode, dirty); return err; do_sync: - spin_unlock(&inode->i_lock); + spin_unlock(&ci->i_ceph_lock); err = ceph_send_removexattr(dentry, name); return err; } -- cgit v1.2.3-70-g09d2 From 807cc4b1201e82769f7435211310f5691dcb704d Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 16 Nov 2011 20:01:43 +0100 Subject: spi/ath79: fix compile error due to missing include Whithout including 'linux/module.h' spi-ath79 driver fails to compile with the these errors: drivers/spi/spi-ath79.c:273:12: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-ath79.c:278:20: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:278:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:278:1: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-ath79.c:278:20: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:279:15: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:279:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:279:1: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-ath79.c:279:15: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:280:16: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:280:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:280:1: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-ath79.c:280:16: warning: function declaration isn't a prototype drivers/spi/spi-ath79.c:281:14: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-ath79.c:281:1: warning: data definition has no type or storage class drivers/spi/spi-ath79.c:281:1: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-ath79.c:281:14: warning: function declaration isn't a prototype Signed-off-by: Gabor Juhos Signed-off-by: Wolfram Sang --- drivers/spi/spi-ath79.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-ath79.c b/drivers/spi/spi-ath79.c index 024b48aed5ca..acc88b4d2869 100644 --- a/drivers/spi/spi-ath79.c +++ b/drivers/spi/spi-ath79.c @@ -13,6 +13,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 00d2952caa6b0b2cd113494ae39f08c4663f371b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 24 Nov 2011 11:10:51 +0800 Subject: spi/nuc900: Include linux/module.h Include linux/module.h to fix below build error: CC drivers/spi/spi-nuc900.o drivers/spi/spi-nuc900.c:484: error: 'THIS_MODULE' undeclared here (not in a function) drivers/spi/spi-nuc900.c:489: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:489: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:489: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/spi/spi-nuc900.c:489: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:490: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:490: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:490: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/spi/spi-nuc900.c:490: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:491: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:491: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:491: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/spi/spi-nuc900.c:491: warning: function declaration isn't a prototype drivers/spi/spi-nuc900.c:492: error: expected declaration specifiers or '...' before string constant drivers/spi/spi-nuc900.c:492: warning: data definition has no type or storage class drivers/spi/spi-nuc900.c:492: warning: type defaults to 'int' in declaration of 'MODULE_ALIAS' drivers/spi/spi-nuc900.c:492: warning: function declaration isn't a prototype make[2]: *** [drivers/spi/spi-nuc900.o] Error 1 make[1]: *** [drivers/spi] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Paul Gortmaker Signed-off-by: Wolfram Sang --- drivers/spi/spi-nuc900.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-nuc900.c b/drivers/spi/spi-nuc900.c index 21c70b2b8311..182e9c873822 100644 --- a/drivers/spi/spi-nuc900.c +++ b/drivers/spi/spi-nuc900.c @@ -8,6 +8,7 @@ * */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From d9ddcec35d713dd33dc20dcb4db84db35f9956a6 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 7 Dec 2011 21:18:16 +0100 Subject: spi/fsl-espi: disable CONFIG_SPI_FSL_ESPI=m build When spi_fsl_espi is chosen to be built as a module, there is a build error because we test only CONFIG_SPI_FSL_ESPI in declaration of struct mpc8xxx_spi in drivers/spi/spi_fsl_lib.h. Also some called functions are not exported. So we forbid CONFIG_SPI_FSL_ESPI to be tristate here. The error looks like: drivers/spi/spi_fsl_espi.c: In function 'fsl_espi_bufs': drivers/spi/spi_fsl_espi.c:232: error: 'struct mpc8xxx_spi' has no member named 'len' ... Signed-off-by: Jiri Slaby Acked-by: Kumar Gala Cc: Grant Likely Signed-off-by: Wolfram Sang --- drivers/spi/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index a1fd73df5416..8ba4510a9519 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -199,7 +199,7 @@ config SPI_FSL_LIB depends on FSL_SOC config SPI_FSL_SPI - tristate "Freescale SPI controller" + bool "Freescale SPI controller" depends on FSL_SOC select SPI_FSL_LIB help @@ -208,7 +208,7 @@ config SPI_FSL_SPI MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. config SPI_FSL_ESPI - tristate "Freescale eSPI controller" + bool "Freescale eSPI controller" depends on FSL_SOC select SPI_FSL_LIB help -- cgit v1.2.3-70-g09d2 From c65b53ba4f9ca4520078bab23099579da3bf0446 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Sat, 19 Nov 2011 13:08:10 +0100 Subject: spi/gpio: fix section mismatch warning Fixes: The function __devinit spi_gpio_probe() references a function __init spi_gpio_alloc.isra.4(). If spi_gpio_alloc.isra.4 is only used by spi_gpio_probe then annotate spi_gpio_alloc.isra.4 with a matching annotation. [wsa: fix spi_gpio_request(), too] Signed-off-by: Manuel Lauss Signed-off-by: Wolfram Sang --- drivers/spi/spi-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index e093d3ec41ba..0094c645ff0d 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -256,7 +256,7 @@ static void spi_gpio_cleanup(struct spi_device *spi) spi_bitbang_cleanup(spi); } -static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) +static int __devinit spi_gpio_alloc(unsigned pin, const char *label, bool is_in) { int value; @@ -270,7 +270,7 @@ static int __init spi_gpio_alloc(unsigned pin, const char *label, bool is_in) return value; } -static int __init +static int __devinit spi_gpio_request(struct spi_gpio_platform_data *pdata, const char *label, u16 *res_flags) { -- cgit v1.2.3-70-g09d2 From fe6b91f47080eb17d21cbf2a39311877d57f6938 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 6 Dec 2011 23:24:52 +0100 Subject: PM / Driver core: leave runtime PM enabled during system shutdown Disabling all runtime PM during system shutdown turns out not to be a good idea, because some devices may need to be woken up from a low-power state at that time. The whole point of disabling runtime PM for system shutdown was to prevent untimely runtime-suspend method calls. This patch (as1504) accomplishes the same result by incrementing the usage count for each device and waiting for ongoing runtime-PM callbacks to finish. This is what we already do during system suspend and hibernation, which makes sense since the shutdown method is pretty much a legacy analog of the pm->poweroff method. This fixes a recent regression on some OMAP systems introduced by commit af8db1508f2c9f3b6e633e2d2d906c6557c617f9 (PM / driver core: disable device's runtime PM during shutdown). Reported-and-tested-by: NeilBrown Signed-off-by: Alan Stern Acked-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki --- drivers/base/core.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index d8b3d89db043..919daa7cd5b1 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1743,8 +1743,10 @@ void device_shutdown(void) */ list_del_init(&dev->kobj.entry); spin_unlock(&devices_kset->list_lock); - /* Disable all device's runtime power management */ - pm_runtime_disable(dev); + + /* Don't allow any more runtime suspends */ + pm_runtime_get_noresume(dev); + pm_runtime_barrier(dev); if (dev->bus && dev->bus->shutdown) { dev_dbg(dev, "shutdown\n"); -- cgit v1.2.3-70-g09d2 From 062c05c46bd4358aad7a0e0cb5ffeb98ab935286 Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 19:50:42 -0500 Subject: Btrfs: try to allocate from cluster even at LOOP_NO_EMPTY_SIZE If we reach LOOP_NO_EMPTY_SIZE, we won't even try to use a cluster that others might have set up. Odds are that there won't be one, but if someone else succeeded in setting it up, we might as well use it, even if we don't try to set up a cluster again. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 813c6bb96c9a..db0b23b14f20 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5285,15 +5285,10 @@ alloc: spin_unlock(&block_group->free_space_ctl->tree_lock); /* - * Ok we want to try and use the cluster allocator, so lets look - * there, unless we are on LOOP_NO_EMPTY_SIZE, since we will - * have tried the cluster allocator plenty of times at this - * point and not have found anything, so we are likely way too - * fragmented for the clustering stuff to find anything, so lets - * just skip it and let the allocator find whatever block it can - * find + * Ok we want to try and use the cluster allocator, so + * lets look there */ - if (last_ptr && loop < LOOP_NO_EMPTY_SIZE) { + if (last_ptr) { /* * the refill lock keeps out other * people trying to start a new cluster @@ -5342,6 +5337,20 @@ alloc: } spin_unlock(&last_ptr->lock); refill_cluster: + /* If we are on LOOP_NO_EMPTY_SIZE, we can't + * set up a new clusters, so lets just skip it + * and let the allocator find whatever block + * it can find. If we reach this point, we + * will have tried the cluster allocator + * plenty of times and not have found + * anything, so we are likely way too + * fragmented for the clustering stuff to find + * anything. */ + if (loop >= LOOP_NO_EMPTY_SIZE) { + spin_unlock(&last_ptr->refill_lock); + goto unclustered_alloc; + } + /* * this cluster didn't work out, free it and * start over @@ -5389,6 +5398,7 @@ refill_cluster: goto loop; } +unclustered_alloc: offset = btrfs_find_space_for_alloc(block_group, search_start, num_bytes, empty_size); /* -- cgit v1.2.3-70-g09d2 From d7a4c45ec24b6c6773ff302c3c9cb5ed46c8e211 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:07:53 +0900 Subject: ARM: SAMSUNG: remove duplicated header include This patch removes duplicated slab header for pwm backlight. arch/arm/plat-samsung/dev-backlight.c: slab.h is included more than once. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/dev-backlight.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c index e657305644cc..a976c023b286 100644 --- a/arch/arm/plat-samsung/dev-backlight.c +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include -- cgit v1.2.3-70-g09d2 From de611dd4078499d5aa5ae9655652687ae630585f Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Thu, 8 Dec 2011 10:08:38 +0900 Subject: ARM: S5PV210: Set 1000ns as PWM backlight period on SMDKV210 The SMDK board uses LT3591 as backlight LED driver of LTE480WV LCD. According to the LT3591 datasheet, the switching frequency should be 1MHz. So, PWM period is calculated by following formula: PWM period = 1/switching frequency = 1/1MHz = 1000ns Thus, the PWM backlight period should be 1000ns. Signed-off-by: Jingoo Han Signed-off-by: Kukjin Kim --- arch/arm/mach-s5pv210/mach-smdkv210.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index a9106c392398..8662ef6e5681 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { static struct platform_pwm_backlight_data smdkv210_bl_data = { .pwm_id = 3, + .pwm_period_ns = 1000, }; static void __init smdkv210_map_io(void) -- cgit v1.2.3-70-g09d2 From e248cd5d5f1c28c82781d4122dddd1b7c3d7b46f Mon Sep 17 00:00:00 2001 From: Amit Daniel Kachhap Date: Thu, 8 Dec 2011 10:07:08 +0900 Subject: ARM: EXYNOS: Fix for stall in case of cpu hotplug or sleep This patch adds remove_irq in place of disable_irq which is correct equivalent function for setup_irq used in exynos4_mct_tick_init. Signed-off-by: Amit Daniel Kachhap Tested-by: Inderpal Singh Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mct.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 97343df8f132..959f2514796c 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -428,9 +428,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt) void local_timer_stop(struct clock_event_device *evt) { + unsigned int cpu = smp_processor_id(); evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt); if (mct_int_type == MCT_INT_SPI) - disable_irq(evt->irq); + if (cpu == 0) + remove_irq(evt->irq, &mct_tick0_event_irq); + else + remove_irq(evt->irq, &mct_tick1_event_irq); else disable_percpu_irq(IRQ_MCT_LOCALTIMER); } -- cgit v1.2.3-70-g09d2 From 991a6c7d94a9be53f0302a1ada06e66a6ebf51e8 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Thu, 8 Dec 2011 10:04:49 +0900 Subject: ARM: EXYNOS: Fix build error without CONFIG_LOCAL_TIMERS arch/arm/mach-exynos/mct.c: In function 'exynos4_timer_resources': arch/arm/mach-exynos/mct.c:450: error: 'exynos4_mct_tick_isr' undeclared (first use in this function) arch/arm/mach-exynos/mct.c:450: error: (Each undeclared identifier is reported only once arch/arm/mach-exynos/mct.c:450: error: for each function it appears in.) make[1]: *** [arch/arm/mach-exynos/mct.o] Error 1 Reported-by: Kyungmin Park Acked-by: Changhwan Youn Signed-off-by: Kukjin Kim Cc: Marc Zyngier --- arch/arm/mach-exynos/mct.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c index 959f2514796c..85b5527d0918 100644 --- a/arch/arm/mach-exynos/mct.c +++ b/arch/arm/mach-exynos/mct.c @@ -44,8 +44,6 @@ struct mct_clock_event_device { char name[10]; }; -static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); - static void exynos4_mct_write(unsigned int value, void *addr) { void __iomem *stat_addr; @@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void) } #ifdef CONFIG_LOCAL_TIMERS + +static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick); + /* Clock event handling */ static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt) { @@ -447,6 +448,7 @@ static void __init exynos4_timer_resources(void) clk_rate = clk_get_rate(mct_clk); +#ifdef CONFIG_LOCAL_TIMERS if (mct_int_type == MCT_INT_PPI) { int err; @@ -456,6 +458,7 @@ static void __init exynos4_timer_resources(void) WARN(err, "MCT: can't request IRQ %d (%d)\n", IRQ_MCT_LOCALTIMER, err); } +#endif /* CONFIG_LOCAL_TIMERS */ } static void __init exynos4_timer_init(void) -- cgit v1.2.3-70-g09d2 From aed21ad28b1323b2807faea019e5ac388a7bc837 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Wed, 23 Nov 2011 11:44:41 -0600 Subject: writeback: comment on the bdi dirty threshold We do "floating proportions" to let active devices to grow its target share of dirty pages and stalled/inactive devices to decrease its target share over time. It works well except in the case of "an inactive disk suddenly goes busy", where the initial target share may be too small. To mitigate this, bdi_position_ratio() has the below line to raise a small bdi_thresh when it's safe to do so, so that the disk be feed with enough dirty pages for efficient IO and in turn fast rampup of bdi_thresh: bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); balance_dirty_pages() normally does negative feedback control which adjusts ratelimit to balance the bdi dirty pages around the target. In some extreme cases when that is not enough, it will have to block the tasks completely until the bdi dirty pages drop below bdi_thresh. Acked-by: Jan Kara Acked-by: Peter Zijlstra Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 71252486bc6f..155efca4c123 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -411,8 +411,13 @@ void global_dirty_limits(unsigned long *pbackground, unsigned long *pdirty) * * Returns @bdi's dirty limit in pages. The term "dirty" in the context of * dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages. - * And the "limit" in the name is not seriously taken as hard limit in - * balance_dirty_pages(). + * + * Note that balance_dirty_pages() will only seriously take it as a hard limit + * when sleeping max_pause per page is not enough to keep the dirty pages under + * control. For example, when the device is completely stalled due to some error + * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key. + * In the other normal situations, it acts more gently by throttling the tasks + * more (rather than completely block them) when the bdi dirty pages go high. * * It allocates high/low dirty limits to fast/slow devices, in order to prevent * - starving fast devices @@ -594,6 +599,13 @@ static unsigned long bdi_position_ratio(struct backing_dev_info *bdi, */ if (unlikely(bdi_thresh > thresh)) bdi_thresh = thresh; + /* + * It's very possible that bdi_thresh is close to 0 not because the + * device is slow, but that it has remained inactive for long time. + * Honour such devices a reasonable good (hopefully IO efficient) + * threshold, so that the occasional writes won't be blocked and active + * writes can rampup the threshold quickly. + */ bdi_thresh = max(bdi_thresh, (limit - dirty) / 8); /* * scale global setpoint to bdi's: -- cgit v1.2.3-70-g09d2 From c5c6343c4d75f9d3226e05a72e7861e967fc8099 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 10:21:33 -0600 Subject: writeback: permit through good bdi even when global dirty exceeded On a system with 1 local mount and 1 NFS mount, if the NFS server becomes not responding when dd to the NFS mount, the NFS dirty pages may exceed the global dirty limit and _every_ task involving writing will be blocked. The whole system appears unresponsive. The workaround is to permit through the bdi's that only has a small number of dirty pages. The number chosen (bdi_stat_error pages) is not enough to enable the local disk to run in optimal throughput, however is enough to make the system responsive on a broken NFS mount. The user can then kill the dirtiers on the NFS mount and increase the global dirty limit to bring up the local disk's throughput. It risks allowing dirty pages to grow much larger than the global dirty limit when there are 1000+ mounts, however that's very unlikely to happen, especially in low memory profiles. Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 155efca4c123..17403e3a7c89 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -1148,6 +1148,19 @@ pause: if (task_ratelimit) break; + /* + * In the case of an unresponding NFS server and the NFS dirty + * pages exceeds dirty_thresh, give the other good bdi's a pipe + * to go through, so that tasks on them still remain responsive. + * + * In theory 1 page is enough to keep the comsumer-producer + * pipe going: the flusher cleans 1 page => the task dirties 1 + * more page. However bdi_dirty has accounting errors. So use + * the larger and more IO friendly bdi_stat_error. + */ + if (bdi_dirty <= bdi_stat_error(bdi)) + break; + if (fatal_signal_pending(current)) break; } -- cgit v1.2.3-70-g09d2 From 82e230a07de3812a5e87a27979f033dad59172e3 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 2 Dec 2011 18:21:51 -0600 Subject: writeback: set max_pause to lowest value on zero bdi_dirty Some trace shows lots of bdi_dirty=0 lines where it's actually some small value if w/o the accounting errors in the per-cpu bdi stats. In this case the max pause time should really be set to the smallest (non-zero) value to avoid IO queue underrun and improve throughput. Signed-off-by: Wu Fengguang --- mm/page-writeback.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/page-writeback.c b/mm/page-writeback.c index 17403e3a7c89..50f08241f981 100644 --- a/mm/page-writeback.c +++ b/mm/page-writeback.c @@ -989,8 +989,7 @@ static unsigned long bdi_max_pause(struct backing_dev_info *bdi, * * 8 serves as the safety ratio. */ - if (bdi_dirty) - t = min(t, bdi_dirty * HZ / (8 * bw + 1)); + t = min(t, bdi_dirty * HZ / (8 * bw + 1)); /* * The pause time will be settled within range (max_pause/4, max_pause). -- cgit v1.2.3-70-g09d2 From 053bf34f5aff499d7b595c500bbab5cbab3636e7 Mon Sep 17 00:00:00 2001 From: Per Forlin Date: Mon, 7 Nov 2011 21:55:11 +0530 Subject: mmc: omap_hsmmc: DMA unmap only once in case of MMC error Reported by Russell King: mmcblk0: error -84 transferring data, sector 149201, nr 64, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read WARNING: at lib/dma-debug.c:811 check_unmap omap_hsmmc omap_hsmmc.0: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000080933000] [size=20480 bytes] In case of an error dma_unmap() is issued in omap_hsmmc_dma_cleanup() and then again in omap_hsmmc_post_req(). Resolve this by clearing the host_cookie to indicate there is no DMA mapped memory to unmap. Signed-off-by: Per Forlin Tested-by: Balaji T K Tested-by: Russell King Signed-off-by: Chris Ball --- drivers/mmc/host/omap_hsmmc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 101cd31c8220..d5fe43d53c51 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -1010,6 +1010,7 @@ static void omap_hsmmc_dma_cleanup(struct omap_hsmmc_host *host, int errno) host->data->sg_len, omap_hsmmc_get_dma_dir(host, host->data)); omap_free_dma(dma_ch); + host->data->host_cookie = 0; } host->data = NULL; } @@ -1575,8 +1576,10 @@ static void omap_hsmmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, struct mmc_data *data = mrq->data; if (host->use_dma) { - dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - omap_hsmmc_get_dma_dir(host, data)); + if (data->host_cookie) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, + omap_hsmmc_get_dma_dir(host, data)); data->host_cookie = 0; } } -- cgit v1.2.3-70-g09d2 From 1d23f178d56ae1349b4fc5108ac8f4f8cdc92afc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:12 +1100 Subject: md: refine interpretation of "hold_active == UNTIL_IOCTL". We like md devices to disappear when they really are not needed. However it is not possible to tell from the current state whether it is needed or not. We can only tell from recent history of changes. In particular immediately after we create an md device it looks very similar to immediately after we have finished with it. So we always preserve a newly created md device until something significant happens. This state is stored in 'hold_active'. The normal case is to keep it until an ioctl happens, as that will normally either activate it, or explicitly de-activate it. If it doesn't then it was probably created by mistake and it is now time to get rid of it. We can also modify an array via sysfs (instead of via ioctl) and we currently treat any change via sysfs like an ioctl as a sign that if it now isn't more active, it should be destroyed. However this is not appropriate as changes made via sysfs are more gradual so we should look for a more definitive change. So this patch only clears 'hold_active' from UNTIL_IOCTL to clear when the array_state is changed via sysfs. Other changes via sysfs are ignored. Signed-off-by: NeilBrown --- drivers/md/md.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 84acfe7d10e4..93b0da133507 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3788,6 +3788,8 @@ array_state_store(struct mddev *mddev, const char *buf, size_t len) if (err) return err; else { + if (mddev->hold_active == UNTIL_IOCTL) + mddev->hold_active = 0; sysfs_notify_dirent_safe(mddev->sysfs_state); return len; } @@ -4508,8 +4510,6 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, if (!capable(CAP_SYS_ADMIN)) return -EACCES; rv = mddev_lock(mddev); - if (mddev->hold_active == UNTIL_IOCTL) - mddev->hold_active = 0; if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); -- cgit v1.2.3-70-g09d2 From af8a24347f966ab9fae6b0f127d1fbc9d6932d3a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 15:49:46 +1100 Subject: md: take a reference to mddev during sysfs access. When we are accessing an mddev via sysfs we know that the mddev cannot disappear because it has an embedded kobj which is refcounted by sysfs. And we also take the mddev_lock. However this is not enough. The final mddev_put could have been called and the mddev_delayed_delete is waiting for sysfs to let go so it can destroy the kobj and mddev. In this state there are a lot of changes that should not be attempted. To to guard against this we: - initialise mddev->all_mddevs in on last put so the state can be easily detected. - in md_attr_show and md_attr_store, check ->all_mddevs under all_mddevs_lock and mddev_get the mddev if it still appears to be active. This means that if we get to sysfs as the mddev is being deleted we will get -EBUSY. rdev_attr_store and rdev_attr_show are similar but already have sufficient protection. They check that rdev->mddev still points to mddev after taking mddev_lock. As this is cleared before delayed removal which can only be requested under the mddev_lock, this ensure the rdev and mddev are still alive. Signed-off-by: NeilBrown --- drivers/md/md.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 93b0da133507..f97c3b2f2f89 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -570,7 +570,7 @@ static void mddev_put(struct mddev *mddev) mddev->ctime == 0 && !mddev->hold_active) { /* Array is not configured at all, and not held active, * so destroy it */ - list_del(&mddev->all_mddevs); + list_del_init(&mddev->all_mddevs); bs = mddev->bio_set; mddev->bio_set = NULL; if (mddev->gendisk) { @@ -4489,11 +4489,20 @@ md_attr_show(struct kobject *kobj, struct attribute *attr, char *page) if (!entry->show) return -EIO; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); + rv = mddev_lock(mddev); if (!rv) { rv = entry->show(mddev, page); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } @@ -4509,11 +4518,19 @@ md_attr_store(struct kobject *kobj, struct attribute *attr, return -EIO; if (!capable(CAP_SYS_ADMIN)) return -EACCES; + spin_lock(&all_mddevs_lock); + if (list_empty(&mddev->all_mddevs)) { + spin_unlock(&all_mddevs_lock); + return -EBUSY; + } + mddev_get(mddev); + spin_unlock(&all_mddevs_lock); rv = mddev_lock(mddev); if (!rv) { rv = entry->store(mddev, page, length); mddev_unlock(mddev); } + mddev_put(mddev); return rv; } -- cgit v1.2.3-70-g09d2 From 52c64152a935e63d9ff73ce823730c9a23dedbff Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:22:48 +1100 Subject: md: bad blocks shouldn't cause a Blocked status on a Faulty device. Once a device is marked Faulty the badblocks - whether acknowledged or not - become irrelevant. So they shouldn't cause the device to be marked as Blocked. Without this patch, a process might write "-blocked" to clear the Blocked status, but while that will correctly fail the device, it won't remove the apparent 'blocked' status. Signed-off-by: NeilBrown --- drivers/md/md.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index f97c3b2f2f89..d730e8f513a7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2546,7 +2546,8 @@ state_show(struct md_rdev *rdev, char *page) sep = ","; } if (test_bit(Blocked, &rdev->flags) || - rdev->badblocks.unacked_exist) { + (rdev->badblocks.unacked_exist + && !test_bit(Faulty, &rdev->flags))) { len += sprintf(page+len, "%sblocked", sep); sep = ","; } -- cgit v1.2.3-70-g09d2 From 8bd2f0a05b361e07d48bb34398593f5f523946b3 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:26:08 +1100 Subject: md: ensure new badblocks are handled promptly. When we mark blocks as bad we need them to be acknowledged by the metadata handler promptly. For an in-kernel metadata handler that was already being done. But for an external metadata handler we need to alert it of the change by sending a notification through the sysfs file. This adds that notification. Signed-off-by: NeilBrown --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/md.c b/drivers/md/md.c index d730e8f513a7..ee981737edfc 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7858,6 +7858,7 @@ int rdev_set_badblocks(struct md_rdev *rdev, sector_t s, int sectors, s + rdev->data_offset, sectors, acknowledged); if (rv) { /* Make sure they get written out promptly */ + sysfs_notify_dirent_safe(rdev->sysfs_state); set_bit(MD_CHANGE_CLEAN, &rdev->mddev->flags); md_wakeup_thread(rdev->mddev->thread); } -- cgit v1.2.3-70-g09d2 From 9283d8c5af4cdcb809e655acdf4be368afec8b58 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Thu, 8 Dec 2011 16:27:57 +1100 Subject: md/raid5: never wait for bad-block acks on failed device. Once a device is failed we really want to completely ignore it. It should go away soon anyway. In particular the presence of bad blocks on it should not cause us to block as we won't be trying to write there anyway. So as soon as we can check if a device is Faulty, do so and pretend that it is already gone if it is Faulty. Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 297e26092178..b0dec01028f4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3036,6 +3036,8 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (dev->written) s->written++; rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = NULL; if (rdev) { is_bad = is_badblock(rdev, sh->sector, STRIPE_SECTORS, &first_bad, &bad_sectors); @@ -3063,7 +3065,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } } else if (test_bit(In_sync, &rdev->flags)) set_bit(R5_Insync, &dev->flags); - else if (!test_bit(Faulty, &rdev->flags)) { + else { /* in sync if before recovery_offset */ if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); -- cgit v1.2.3-70-g09d2 From c564a0cb9d0c7f4ac50f1e9ca8bc67fd66cd550f Mon Sep 17 00:00:00 2001 From: "Jett.Zhou" Date: Wed, 30 Nov 2011 14:32:54 +0800 Subject: ARM: sa1100: fix build error arm-eabi-4.4.3-ld:--defsym zreladdr=: syntax error make[2]: *** [arch/arm/boot/compressed/vmlinux] Error 1 make[1]: *** [arch/arm/boot/compressed/vmlinux] Error 2 make: *** [uImage] Error 2 Signed-off-by: Haojian Zhuang Signed-off-by: Jett.Zhou --- arch/arm/mach-sa1100/Makefile.boot | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-sa1100/Makefile.boot b/arch/arm/mach-sa1100/Makefile.boot index 5a616f6e5612..f7951aa04562 100644 --- a/arch/arm/mach-sa1100/Makefile.boot +++ b/arch/arm/mach-sa1100/Makefile.boot @@ -1,5 +1,5 @@ -ifeq ($(CONFIG_ARCH_SA1100),y) - zreladdr-$(CONFIG_SA1111) += 0xc0208000 +ifeq ($(CONFIG_SA1111),y) + zreladdr-y += 0xc0208000 else zreladdr-y += 0xc0008000 endif -- cgit v1.2.3-70-g09d2 From 274bd4fb3ed6b72c1d77ef8850511f09fc6b8e4d Mon Sep 17 00:00:00 2001 From: Alexandre Oliva Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: try cluster but don't advance in search list When we find an existing cluster, we switch to its block group as the current block group, possibly skipping multiple blocks in the process. Furthermore, under heavy contention, multiple threads may fail to allocate from a cluster and then release just-created clusters just to proceed to create new ones in a different block group. This patch tries to allocate from an existing cluster regardless of its block group, and doesn't switch to that group, instead proceeding to try to allocate a cluster from the group it was iterating before the attempt. Signed-off-by: Alexandre Oliva Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 74 +++++++++++++++++++++----------------------------- 1 file changed, 31 insertions(+), 43 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index db0b23b14f20..05e1386b8bec 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -5106,11 +5106,11 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, struct btrfs_root *root = orig_root->fs_info->extent_root; struct btrfs_free_cluster *last_ptr = NULL; struct btrfs_block_group_cache *block_group = NULL; + struct btrfs_block_group_cache *used_block_group; int empty_cluster = 2 * 1024 * 1024; int allowed_chunk_alloc = 0; int done_chunk_alloc = 0; struct btrfs_space_info *space_info; - int last_ptr_loop = 0; int loop = 0; int index = 0; int alloc_type = (data & BTRFS_BLOCK_GROUP_DATA) ? @@ -5172,6 +5172,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans, ideal_cache: block_group = btrfs_lookup_block_group(root->fs_info, search_start); + used_block_group = block_group; /* * we don't want to use the block group if it doesn't match our * allocation bits, or if its not cached. @@ -5209,6 +5210,7 @@ search: u64 offset; int cached; + used_block_group = block_group; btrfs_get_block_group(block_group); search_start = block_group->key.objectid; @@ -5294,49 +5296,33 @@ alloc: * people trying to start a new cluster */ spin_lock(&last_ptr->refill_lock); - if (!last_ptr->block_group || - last_ptr->block_group->ro || - !block_group_bits(last_ptr->block_group, data)) + used_block_group = last_ptr->block_group; + if (used_block_group != block_group && + (!used_block_group || + used_block_group->ro || + !block_group_bits(used_block_group, data))) { + used_block_group = block_group; goto refill_cluster; + } + + if (used_block_group != block_group) + btrfs_get_block_group(used_block_group); - offset = btrfs_alloc_from_cluster(block_group, last_ptr, - num_bytes, search_start); + offset = btrfs_alloc_from_cluster(used_block_group, + last_ptr, num_bytes, used_block_group->key.objectid); if (offset) { /* we have a block, we're done */ spin_unlock(&last_ptr->refill_lock); goto checks; } - spin_lock(&last_ptr->lock); - /* - * whoops, this cluster doesn't actually point to - * this block group. Get a ref on the block - * group is does point to and try again - */ - if (!last_ptr_loop && last_ptr->block_group && - last_ptr->block_group != block_group && - index <= - get_block_group_index(last_ptr->block_group)) { - - btrfs_put_block_group(block_group); - block_group = last_ptr->block_group; - btrfs_get_block_group(block_group); - spin_unlock(&last_ptr->lock); - spin_unlock(&last_ptr->refill_lock); - - last_ptr_loop = 1; - search_start = block_group->key.objectid; - /* - * we know this block group is properly - * in the list because - * btrfs_remove_block_group, drops the - * cluster before it removes the block - * group from the list - */ - goto have_block_group; + WARN_ON(last_ptr->block_group != used_block_group); + if (used_block_group != block_group) { + btrfs_put_block_group(used_block_group); + used_block_group = block_group; } - spin_unlock(&last_ptr->lock); refill_cluster: + BUG_ON(used_block_group != block_group); /* If we are on LOOP_NO_EMPTY_SIZE, we can't * set up a new clusters, so lets just skip it * and let the allocator find whatever block @@ -5357,8 +5343,6 @@ refill_cluster: */ btrfs_return_cluster_to_free_space(NULL, last_ptr); - last_ptr_loop = 0; - /* allocate a cluster in this block group */ ret = btrfs_find_space_cluster(trans, root, block_group, last_ptr, @@ -5425,14 +5409,14 @@ checks: search_start = stripe_align(root, offset); /* move on to the next group */ if (search_start + num_bytes >= search_end) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } /* move on to the next group */ if (search_start + num_bytes > - block_group->key.objectid + block_group->key.offset) { - btrfs_add_free_space(block_group, offset, num_bytes); + used_block_group->key.objectid + used_block_group->key.offset) { + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5440,14 +5424,14 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); - ret = btrfs_update_reserved_bytes(block_group, num_bytes, + ret = btrfs_update_reserved_bytes(used_block_group, num_bytes, alloc_type); if (ret == -EAGAIN) { - btrfs_add_free_space(block_group, offset, num_bytes); + btrfs_add_free_space(used_block_group, offset, num_bytes); goto loop; } @@ -5456,15 +5440,19 @@ checks: ins->offset = num_bytes; if (offset < search_start) - btrfs_add_free_space(block_group, offset, + btrfs_add_free_space(used_block_group, offset, search_start - offset); BUG_ON(offset > search_start); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); break; loop: failed_cluster_refill = false; failed_alloc = false; BUG_ON(index != get_block_group_index(block_group)); + if (used_block_group != block_group) + btrfs_put_block_group(used_block_group); btrfs_put_block_group(block_group); } up_read(&space_info->groups_sem); -- cgit v1.2.3-70-g09d2 From a5d16333612718569ffd26064270e535cb9c3928 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: check if the to-be-added device is writable If we call ioctl(BTRFS_IOC_ADD_DEV) directly, we'll succeed in adding a readonly device to a btrfs filesystem, and btrfs will write to that device, emitting kernel errors: [ 3109.833692] lost page write due to I/O error on loop2 [ 3109.833720] lost page write due to I/O error on loop2 ... Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index c37433d3cd82..0a8c8f8304b1 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -1611,7 +1611,7 @@ int btrfs_init_new_device(struct btrfs_root *root, char *device_path) if ((sb->s_flags & MS_RDONLY) && !root->fs_info->fs_devices->seeding) return -EINVAL; - bdev = blkdev_get_by_path(device_path, FMODE_EXCL, + bdev = blkdev_get_by_path(device_path, FMODE_WRITE | FMODE_EXCL, root->fs_info->bdev_holder); if (IS_ERR(bdev)) return PTR_ERR(bdev); -- cgit v1.2.3-70-g09d2 From 1cf4ffdb3289624a6462c94f2ce05545b32ef736 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Wed, 7 Dec 2011 20:08:40 -0500 Subject: Btrfs: drop spin lock when memory alloc fails Drop spin lock in convert_extent_bit() when memory alloc fails, otherwise, it will be a deadlock. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index be1bf627a14b..49f3c9dc09f4 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -935,8 +935,10 @@ again: node = tree_search(tree, start); if (!node) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = insert_state(tree, prealloc, start, end, &bits); prealloc = NULL; BUG_ON(err == -EEXIST); @@ -992,8 +994,10 @@ hit_next: */ if (state->start < start) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, start); BUG_ON(err == -EEXIST); prealloc = NULL; @@ -1024,8 +1028,10 @@ hit_next: this_end = last_start - 1; prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } /* * Avoid to free 'prealloc' if it can be merged with @@ -1051,8 +1057,10 @@ hit_next: */ if (state->start <= end && state->end > end) { prealloc = alloc_extent_state_atomic(prealloc); - if (!prealloc) - return -ENOMEM; + if (!prealloc) { + err = -ENOMEM; + goto out; + } err = split_state(tree, state, prealloc, end + 1); BUG_ON(err == -EEXIST); -- cgit v1.2.3-70-g09d2 From 2ded6e6a94c98ea453a156748cb7fabaf39a76b9 Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Fri, 18 Nov 2011 16:33:06 +0100 Subject: x86, hpet: Immediately disable HPET timer 1 if rtc irq is masked When HPET is operating in RTC mode, the TN_ENABLE bit on timer1 controls whether the HPET or the RTC delivers interrupts to irq8. When the system goes into suspend, the RTC driver sends a signal to the HPET driver so that the HPET releases control of irq8, allowing the RTC to wake the system from suspend. The switchover is accomplished by a write to the HPET configuration registers which currently only occurs while servicing the HPET interrupt. On some systems, I have seen the system suspend before an HPET interrupt occurs, preventing the write to the HPET configuration register and leaving the HPET in control of the irq8. As the HPET is not active during suspend, it does not generate a wake signal and RTC alarms do not work. This patch forces the HPET driver to immediately transfer control of the irq8 channel to the RTC instead of waiting until the next interrupt event. Signed-off-by: Mark Langsdorf Link: http://lkml.kernel.org/r/20111118153306.GB16319@alberich.amd.com Tested-by: Andreas Herrmann Signed-off-by: Andreas Herrmann Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org --- arch/x86/kernel/hpet.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index b946a9eac7d9..1bb0bf4d92cd 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -1049,6 +1049,14 @@ int hpet_rtc_timer_init(void) } EXPORT_SYMBOL_GPL(hpet_rtc_timer_init); +static void hpet_disable_rtc_channel(void) +{ + unsigned long cfg; + cfg = hpet_readl(HPET_T1_CFG); + cfg &= ~HPET_TN_ENABLE; + hpet_writel(cfg, HPET_T1_CFG); +} + /* * The functions below are called from rtc driver. * Return 0 if HPET is not being used. @@ -1060,6 +1068,9 @@ int hpet_mask_rtc_irq_bit(unsigned long bit_mask) return 0; hpet_rtc_flags &= ~bit_mask; + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); + return 1; } EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit); @@ -1125,15 +1136,11 @@ EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq); static void hpet_rtc_timer_reinit(void) { - unsigned int cfg, delta; + unsigned int delta; int lost_ints = -1; - if (unlikely(!hpet_rtc_flags)) { - cfg = hpet_readl(HPET_T1_CFG); - cfg &= ~HPET_TN_ENABLE; - hpet_writel(cfg, HPET_T1_CFG); - return; - } + if (unlikely(!hpet_rtc_flags)) + hpet_disable_rtc_channel(); if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit) delta = hpet_default_delta; -- cgit v1.2.3-70-g09d2 From 1418a3e5ad4d01b1d4abf2c479c50b0cedd59e3f Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 8 Dec 2011 21:24:06 +0900 Subject: TOMOYO: Fix pathname handling of disconnected paths. Current tomoyo_realpath_from_path() implementation returns strange pathname when calculating pathname of a file which belongs to lazy unmounted tree. Use local pathname rather than strange absolute pathname in that case. Also, this patch fixes a regression by commit 02125a82 "fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API". Signed-off-by: Tetsuo Handa Acked-by: Al Viro Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- security/tomoyo/realpath.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c index 36fa7c9bedc4..d9f3ced8756e 100644 --- a/security/tomoyo/realpath.c +++ b/security/tomoyo/realpath.c @@ -293,8 +293,16 @@ char *tomoyo_realpath_from_path(struct path *path) pos = tomoyo_get_local_path(path->dentry, buf, buf_len - 1); /* Get absolute name for the rest. */ - else + else { pos = tomoyo_get_absolute_path(path, buf, buf_len - 1); + /* + * Fall back to local name if absolute name is not + * available. + */ + if (pos == ERR_PTR(-EINVAL)) + pos = tomoyo_get_local_path(path->dentry, buf, + buf_len - 1); + } encode: if (IS_ERR(pos)) continue; -- cgit v1.2.3-70-g09d2 From 5d8c71f9e5fbdd95650be00294d238e27a363b5c Mon Sep 17 00:00:00 2001 From: Adam Kwolek Date: Fri, 9 Dec 2011 14:26:11 +1100 Subject: md: raid5 crash during degradation NULL pointer access causes crash in raid5 module. Signed-off-by: Adam Kwolek Signed-off-by: NeilBrown --- drivers/md/raid5.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b0dec01028f4..31670f8d6b65 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -3070,7 +3070,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset) set_bit(R5_Insync, &dev->flags); } - if (test_bit(R5_WriteError, &dev->flags)) { + if (rdev && test_bit(R5_WriteError, &dev->flags)) { clear_bit(R5_Insync, &dev->flags); if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; @@ -3078,7 +3078,7 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s) } else clear_bit(R5_WriteError, &dev->flags); } - if (test_bit(R5_MadeGood, &dev->flags)) { + if (rdev && test_bit(R5_MadeGood, &dev->flags)) { if (!test_bit(Faulty, &rdev->flags)) { s->handle_bad_blocks = 1; atomic_inc(&rdev->nr_pending); -- cgit v1.2.3-70-g09d2 From 9a5101c8968c7b3e7de5564af6358d7332cf9a6b Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Mon, 7 Nov 2011 16:11:24 +0300 Subject: CIFS: Add descriptions to the brlock cache functions Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French --- fs/cifs/file.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index cf0b1539b321..4dd9283885e7 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -702,6 +702,13 @@ cifs_find_lock_conflict(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, lock->type, lock->netfid, conf_lock); } +/* + * Check if there is another lock that prevents us to set the lock (mandatory + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_lock_test(struct cifsInodeInfo *cinode, __u64 offset, __u64 length, __u8 type, __u16 netfid, struct file_lock *flock) @@ -739,6 +746,12 @@ cifs_lock_add(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock) mutex_unlock(&cinode->lock_mutex); } +/* + * Set the byte-range lock (mandatory style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if no locks prevent us but we need to request to the server; + * 3) -EACCESS, if there is a lock that prevents us and wait is false. + */ static int cifs_lock_add_if(struct cifsInodeInfo *cinode, struct cifsLockInfo *lock, bool wait) @@ -778,6 +791,13 @@ try_again: return rc; } +/* + * Check if there is another lock that prevents us to set the lock (posix + * style). If such a lock exists, update the flock structure with its + * properties. Otherwise, set the flock type to F_UNLCK if we can cache brlocks + * or leave it the same if we can't. Returns 0 if we don't need to request to + * the server or 1 otherwise. + */ static int cifs_posix_lock_test(struct file *file, struct file_lock *flock) { @@ -800,6 +820,12 @@ cifs_posix_lock_test(struct file *file, struct file_lock *flock) return rc; } +/* + * Set the byte-range lock (posix style). Returns: + * 1) 0, if we set the lock and don't need to request to the server; + * 2) 1, if we need to request to the server; + * 3) <0, if the error occurs while setting the lock. + */ static int cifs_posix_lock_set(struct file *file, struct file_lock *flock) { -- cgit v1.2.3-70-g09d2 From 59edb63ad08e4f3a9477223c9aaf3fba753085bf Mon Sep 17 00:00:00 2001 From: Steve French Date: Thu, 10 Nov 2011 12:48:20 -0600 Subject: cifs: Fix sparse warning when calling cifs_strtoUCS Fix sparse endian check warning while calling cifs_strtoUCS CHECK fs/cifs/smbencrypt.c fs/cifs/smbencrypt.c:216:37: warning: incorrect type in argument 1 (different base types) fs/cifs/smbencrypt.c:216:37: expected restricted __le16 [usertype] * fs/cifs/smbencrypt.c:216:37: got unsigned short * Signed-off-by: Steve French Acked-by: Shirish Pargaonkar Date: Thu, 1 Dec 2011 20:22:41 -0500 Subject: cifs: attempt to freeze while looping on a receive attempt In the recent overhaul of the demultiplex thread receive path, I neglected to ensure that we attempt to freeze on each pass through the receive loop. Reported-and-Tested-by: Woody Suwalski Reported-and-Tested-by: Adam Williamson Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d6a972df0338..8cd4b52d4217 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -441,6 +441,8 @@ cifs_readv_from_socket(struct TCP_Server_Info *server, struct kvec *iov_orig, smb_msg.msg_controllen = 0; for (total_read = 0; to_read; total_read += length, to_read -= length) { + try_to_freeze(); + if (server_unresponsive(server)) { total_read = -EAGAIN; break; -- cgit v1.2.3-70-g09d2 From 7023676f9ee851d94f0942e879243fc1f9081c47 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 1 Dec 2011 20:23:34 -0500 Subject: cifs: check for NULL last_entry before calling cifs_save_resume_key Prior to commit eaf35b1, cifs_save_resume_key had some NULL pointer checks at the top. It turns out that at least one of those NULL pointer checks is needed after all. When the LastNameOffset in a FIND reply appears to be beyond the end of the buffer, CIFSFindFirst and CIFSFindNext will set srch_inf.last_entry to NULL. Since eaf35b1, the code will now oops in this situation. Fix this by having the callers check for a NULL last entry pointer before calling cifs_save_resume_key. No change is needed for the call site in cifs_readdir as it's not reachable with a NULL current_entry pointer. This should fix: https://bugzilla.redhat.com/show_bug.cgi?id=750247 Cc: stable@vger.kernel.org Cc: Christoph Hellwig Reported-by: Adam G. Metzler Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/readdir.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 5de03ec20144..a090bbe6ee29 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -554,7 +554,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, rc); return rc; } - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); } while ((index_to_find >= cifsFile->srch_inf.index_of_last_entry) && @@ -562,7 +565,10 @@ static int find_cifs_entry(const int xid, struct cifs_tcon *pTcon, cFYI(1, "calling findnext2"); rc = CIFSFindNext(xid, pTcon, cifsFile->netfid, &cifsFile->srch_inf); - cifs_save_resume_key(cifsFile->srch_inf.last_entry, cifsFile); + /* FindFirst/Next set last_entry to NULL on malformed reply */ + if (cifsFile->srch_inf.last_entry) + cifs_save_resume_key(cifsFile->srch_inf.last_entry, + cifsFile); if (rc) return -ENOENT; } -- cgit v1.2.3-70-g09d2 From 905ad269c55fc62bee3da29f7b1d1efeba8aa1e1 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 8 Dec 2011 23:20:45 -0500 Subject: procfs: fix a vfsmount longterm reference leak kern_mount() doesn't pair with plain mntput()... Signed-off-by: Al Viro --- fs/proc/root.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/proc/root.c b/fs/proc/root.c index 9a8a2b77b874..03102d978180 100644 --- a/fs/proc/root.c +++ b/fs/proc/root.c @@ -91,20 +91,18 @@ static struct file_system_type proc_fs_type = { void __init proc_root_init(void) { - struct vfsmount *mnt; int err; proc_init_inodecache(); err = register_filesystem(&proc_fs_type); if (err) return; - mnt = kern_mount_data(&proc_fs_type, &init_pid_ns); - if (IS_ERR(mnt)) { + err = pid_ns_prepare_proc(&init_pid_ns); + if (err) { unregister_filesystem(&proc_fs_type); return; } - init_pid_ns.proc_mnt = mnt; proc_symlink("mounts", NULL, "self/mounts"); proc_net_init(); @@ -209,5 +207,5 @@ int pid_ns_prepare_proc(struct pid_namespace *ns) void pid_ns_release_proc(struct pid_namespace *ns) { - mntput(ns->proc_mnt); + kern_unmount(ns->proc_mnt); } -- cgit v1.2.3-70-g09d2 From 6f686574cccc2ef66fb38e41f19cedd81e7b4504 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Fri, 9 Dec 2011 00:38:50 -0500 Subject: ... and the same kind of leak for mqueue Signed-off-by: Al Viro --- ipc/mqueue.c | 8 +++----- ipc/msgutil.c | 5 ----- 2 files changed, 3 insertions(+), 10 deletions(-) diff --git a/ipc/mqueue.c b/ipc/mqueue.c index 2e0ecfcc881d..5b4293d9819d 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -1269,7 +1269,7 @@ void mq_clear_sbinfo(struct ipc_namespace *ns) void mq_put_mnt(struct ipc_namespace *ns) { - mntput(ns->mq_mnt); + kern_unmount(ns->mq_mnt); } static int __init init_mqueue_fs(void) @@ -1291,11 +1291,9 @@ static int __init init_mqueue_fs(void) spin_lock_init(&mq_lock); - init_ipc_ns.mq_mnt = kern_mount_data(&mqueue_fs_type, &init_ipc_ns); - if (IS_ERR(init_ipc_ns.mq_mnt)) { - error = PTR_ERR(init_ipc_ns.mq_mnt); + error = mq_init_ns(&init_ipc_ns); + if (error) goto out_filesystem; - } return 0; diff --git a/ipc/msgutil.c b/ipc/msgutil.c index 8b5ce5d3f3ef..5652101cdac0 100644 --- a/ipc/msgutil.c +++ b/ipc/msgutil.c @@ -27,11 +27,6 @@ DEFINE_SPINLOCK(mq_lock); */ struct ipc_namespace init_ipc_ns = { .count = ATOMIC_INIT(1), -#ifdef CONFIG_POSIX_MQUEUE - .mq_queues_max = DFLT_QUEUESMAX, - .mq_msg_max = DFLT_MSGMAX, - .mq_msgsize_max = DFLT_MSGSIZEMAX, -#endif .user_ns = &init_user_ns, }; -- cgit v1.2.3-70-g09d2 From e8c7106280a305e1ff2a3a8a4dfce141469fb039 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Fri, 18 Nov 2011 13:09:11 +0000 Subject: x86, efi: Calling __pa() with an ioremap()ed address is invalid If we encounter an efi_memory_desc_t without EFI_MEMORY_WB set in ->attribute we currently call set_memory_uc(), which in turn calls __pa() on a potentially ioremap'd address. On CONFIG_X86_32 this is invalid, resulting in the following oops on some machines: BUG: unable to handle kernel paging request at f7f22280 IP: [] reserve_ram_pages_type+0x89/0x210 [...] Call Trace: [] ? page_is_ram+0x1a/0x40 [] reserve_memtype+0xdf/0x2f0 [] set_memory_uc+0x49/0xa0 [] efi_enter_virtual_mode+0x1c2/0x3aa [] start_kernel+0x291/0x2f2 [] ? loglevel+0x1b/0x1b [] i386_start_kernel+0xbf/0xc8 A better approach to this problem is to map the memory region with the correct attributes from the start, instead of modifying it after the fact. The uncached case can be handled by ioremap_nocache() and the cached by ioremap_cache(). Despite first impressions, it's not possible to use ioremap_cache() to map all cached memory regions on CONFIG_X86_64 because EFI_RUNTIME_SERVICES_DATA regions really don't like being mapped into the vmalloc space, as detailed in the following bug report, https://bugzilla.redhat.com/show_bug.cgi?id=748516 Therefore, we need to ensure that any EFI_RUNTIME_SERVICES_DATA regions are covered by the direct kernel mapping table on CONFIG_X86_64. To accomplish this we now map E820_RESERVED_EFI regions via the direct kernel mapping with the initial call to init_memory_mapping() in setup_arch(), whereas previously these regions wouldn't be mapped if they were after the last E820_RAM region until efi_ioremap() was called. Doing it this way allows us to delete efi_ioremap() completely. Signed-off-by: Matt Fleming Cc: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console-pimps.org Signed-off-by: Ingo Molnar --- arch/x86/include/asm/e820.h | 8 ++++++++ arch/x86/include/asm/efi.h | 5 ----- arch/x86/kernel/e820.c | 3 ++- arch/x86/kernel/setup.c | 21 ++++++++++++++++++++- arch/x86/platform/efi/efi.c | 29 ++++++++++++++++++----------- arch/x86/platform/efi/efi_64.c | 17 ----------------- 6 files changed, 48 insertions(+), 35 deletions(-) diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index 908b96957d88..c9547033e38e 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,6 +53,13 @@ */ #define E820_RESERVED_KERN 128 +/* + * Address ranges that need to be mapped by the kernel direct + * mapping. This is used to make sure regions such as + * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). + */ +#define E820_RESERVED_EFI 129 + #ifndef __ASSEMBLY__ #include struct e820entry { @@ -115,6 +122,7 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif +extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index 7093e4a6a0bc..b8d8bfcd44a9 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,8 +33,6 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) -#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) - #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -84,9 +82,6 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) -extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, - u32 type); - #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 303a0e48f076..65ffd110a81b 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,6 +135,7 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: + case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -783,7 +784,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index cf0ef986cb6d..9a9e40fb091c 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,6 +691,8 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { + unsigned long end_pfn; + #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -932,7 +934,24 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<>PAGE_SHIFT, E820_RESERVED_EFI); + if (efi_end > max_low_pfn) + end_pfn = efi_end; + } +#endif + + max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); max_pfn_mapped = max_low_pfn_mapped; #ifdef CONFIG_X86_64 diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 37718f0f053d..c9718a16be15 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -323,10 +323,13 @@ static void __init do_add_efi_memmap(void) case EFI_UNUSABLE_MEMORY: e820_type = E820_UNUSABLE; break; + case EFI_RUNTIME_SERVICES_DATA: + e820_type = E820_RESERVED_EFI; + break; default: /* * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE - * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO + * EFI_MEMORY_MAPPED_IO * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE */ e820_type = E820_RESERVED; @@ -671,10 +674,21 @@ void __init efi_enter_virtual_mode(void) end_pfn = PFN_UP(end); if (end_pfn <= max_low_pfn_mapped || (end_pfn > (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) + && end_pfn <= max_pfn_mapped)) { va = __va(md->phys_addr); - else - va = efi_ioremap(md->phys_addr, size, md->type); + + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = (u64) (unsigned long)va; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + } else { + if (!(md->attribute & EFI_MEMORY_WB)) + va = ioremap_nocache(md->phys_addr, size); + else + va = ioremap_cache(md->phys_addr, size); + } md->virt_addr = (u64) (unsigned long) va; @@ -684,13 +698,6 @@ void __init efi_enter_virtual_mode(void) continue; } - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = md->virt_addr; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index ac3aa54e2654..312250c6b2de 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,20 +80,3 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } - -void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, - u32 type) -{ - unsigned long last_map_pfn; - - if (type == EFI_MEMORY_MAPPED_IO) - return ioremap(phys_addr, size); - - last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); - if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { - unsigned long top = last_map_pfn << PAGE_SHIFT; - efi_ioremap(top, size - (top - phys_addr), type); - } - - return (void __iomem *)__va(phys_addr); -} -- cgit v1.2.3-70-g09d2 From c0d96aed8c6dd925afe9ea35491a0cd458642a86 Mon Sep 17 00:00:00 2001 From: Jason Chen Date: Wed, 30 Nov 2011 11:34:27 +0800 Subject: MXC PWM: should active during DOZE/WAIT/DBG mode Signed-off-by: Jason Chen Signed-off-by: Sascha Hauer Cc: stable@kernel.org --- arch/arm/plat-mxc/pwm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 42d74ea59084..845de59f07ed 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -32,6 +32,9 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4) +#define MX3_PWMCR_DOZEEN (1 << 24) +#define MX3_PWMCR_WAITEN (1 << 23) +#define MX3_PWMCR_DBGEN (1 << 22) #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16) #define MX3_PWMCR_CLKSRC_IPG (1 << 16) #define MX3_PWMCR_EN (1 << 0) @@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR); writel(period_cycles, pwm->mmio_base + MX3_PWMPR); - cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN; + cr = MX3_PWMCR_PRESCALER(prescale) | + MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_DBGEN | MX3_PWMCR_EN; if (cpu_is_mx25()) cr |= MX3_PWMCR_CLKSRC_IPG; -- cgit v1.2.3-70-g09d2 From 16b3647d333a18141fc9d172e89a142250be0c57 Mon Sep 17 00:00:00 2001 From: Dong Aisheng Date: Sat, 12 Nov 2011 00:09:06 +0800 Subject: ARM: mx5: add __initconst for fec pdata MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Dong Aisheng Acked-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_evk.c | 2 +- arch/arm/mach-mx5/board-mx53_loco.c | 2 +- arch/arm/mach-mx5/board-mx53_smd.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index 6bea31ab8f85..64bbfcea6f35 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void) gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_evk_fec_pdata = { +static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 7678f7734db6..237bdecd9331 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void) gpio_set_value(LOCO_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_loco_fec_data = { +static const struct fec_platform_data mx53_loco_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 59c0845eb4a6..d42132a80e8f 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void) gpio_set_value(SMD_FEC_PHY_RST, 1); } -static struct fec_platform_data mx53_smd_fec_data = { +static const struct fec_platform_data mx53_smd_fec_data __initconst = { .phy = PHY_INTERFACE_MODE_RMII, }; -- cgit v1.2.3-70-g09d2 From 300a47b4378a3b2e7c2a423b0aa4d75fc78987d3 Mon Sep 17 00:00:00 2001 From: Richard Zhao Date: Fri, 9 Dec 2011 10:46:21 +0800 Subject: ARM: imx: fix cpufreq build errors CC arch/arm/plat-mxc/cpufreq.o arch/arm/plat-mxc/cpufreq.c:203: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:203: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:203: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' arch/arm/plat-mxc/cpufreq.c:203: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:204: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:204: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:204: warning: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' arch/arm/plat-mxc/cpufreq.c:204: warning: function declaration isn't a prototype arch/arm/plat-mxc/cpufreq.c:205: error: expected declaration specifiers or '...' before string constant arch/arm/plat-mxc/cpufreq.c:205: warning: data definition has no type or storage class arch/arm/plat-mxc/cpufreq.c:205: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' arch/arm/plat-mxc/cpufreq.c:205: warning: function declaration isn't a prototype make[1]: *** [arch/arm/plat-mxc/cpufreq.o] Error 1 make: *** [arch/arm/plat-mxc] Error 2 Signed-off-by: Richard Zhao Signed-off-by: Richard Zhao Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/cpufreq.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c index 74aac96cda20..adbff706ef6f 100644 --- a/arch/arm/plat-mxc/cpufreq.c +++ b/arch/arm/plat-mxc/cpufreq.c @@ -17,6 +17,7 @@ * the CPU clock speed on the fly. */ +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 847a2ee7392e7d3278f9b82c4b503744c72ee463 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Mon, 5 Dec 2011 10:28:11 +0800 Subject: arm/imx: fix power button on imx51 babbage board Since commit 6571534 (plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired) was in, the power button on imx51 babbage board stopped working because it's pulled up by mistake. The patch removes the pull-up setting from the pad configuration for that gpio to make the power button back to work. Signed-off-by: Shawn Guo Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx51_babbage.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index 5c837603ff0f..24994bb52147 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void) { iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21, - PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH); imx51_soc_init(); -- cgit v1.2.3-70-g09d2 From b2c1639135c0fc1560f3fe9a3a83f2c8265a9e02 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Thu, 8 Dec 2011 20:21:40 -0800 Subject: MAINTAINERS: Update amd-iommu F: patterns Commit 29b68415e335 ("x86: amd_iommu: move to drivers/iommu/") moved the files, update the patterns. CC: Ohad Ben-Cohen CC: Joerg Roedel Signed-off-by: Joe Perches Signed-off-by: Joerg Roedel --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 4808256446f2..c267601ce9e1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -511,8 +511,8 @@ M: Joerg Roedel L: iommu@lists.linux-foundation.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported -F: arch/x86/kernel/amd_iommu*.c -F: arch/x86/include/asm/amd_iommu*.h +F: drivers/iommu/amd_iommu*.[ch] +F: include/linux/amd-iommu.h AMD MICROCODE UPDATE SUPPORT M: Andreas Herrmann -- cgit v1.2.3-70-g09d2 From 635697c663f38106063d5659f0cf2e45afcd4bb5 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:51 -0800 Subject: vmscan: fix initial shrinker size handling A shrinker function can return -1, means that it cannot do anything without a risk of deadlock. For example prune_super() does this if it cannot grab a superblock refrence, even if nr_to_scan=0. Currently we interpret this -1 as a ULONG_MAX size shrinker and evaluate `total_scan' according to this. So the next time around this shrinker can cause really big pressure. Let's skip such shrinkers instead. Also make total_scan signed, otherwise the check (total_scan < 0) below never works. Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmscan.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index a1893c050795..f5255442ae2b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -247,14 +247,18 @@ unsigned long shrink_slab(struct shrink_control *shrink, list_for_each_entry(shrinker, &shrinker_list, list) { unsigned long long delta; - unsigned long total_scan; - unsigned long max_pass; + long total_scan; + long max_pass; int shrink_ret = 0; long nr; long new_nr; long batch_size = shrinker->batch ? shrinker->batch : SHRINK_BATCH; + max_pass = do_shrinker_shrink(shrinker, shrink, 0); + if (max_pass <= 0) + continue; + /* * copy the current shrinker scan count into a local variable * and zero it so that other concurrent shrinker invocations @@ -265,7 +269,6 @@ unsigned long shrink_slab(struct shrink_control *shrink, } while (cmpxchg(&shrinker->nr, nr, 0) != nr); total_scan = nr; - max_pass = do_shrinker_shrink(shrinker, shrink, 0); delta = (4 * nr_pages_scanned) / shrinker->seeks; delta *= max_pass; do_div(delta, lru_pages + 1); -- cgit v1.2.3-70-g09d2 From 83aeeada7c69f35e5100b27ec354335597a7a488 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Thu, 8 Dec 2011 14:33:54 -0800 Subject: vmscan: use atomic-long for shrinker batching Use atomic-long operations instead of looping around cmpxchg(). [akpm@linux-foundation.org: massage atomic.h inclusions] Signed-off-by: Konstantin Khlebnikov Cc: Dave Chinner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fs.h | 2 +- include/linux/mm.h | 1 + include/linux/shrinker.h | 2 +- mm/vmscan.c | 17 +++++++---------- 4 files changed, 10 insertions(+), 12 deletions(-) diff --git a/include/linux/fs.h b/include/linux/fs.h index 019dc558df1a..e0bc4ffb8e7f 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -393,8 +393,8 @@ struct inodes_stat_t { #include #include #include -#include #include +#include #include diff --git a/include/linux/mm.h b/include/linux/mm.h index 3dc3a8c2c485..4baadd18f4ad 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index a83833a1f7a2..07ceb97d53fa 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -35,7 +35,7 @@ struct shrinker { /* These are for internal use */ struct list_head list; - long nr; /* objs pending delete */ + atomic_long_t nr_in_batch; /* objs pending delete */ }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ extern void register_shrinker(struct shrinker *); diff --git a/mm/vmscan.c b/mm/vmscan.c index f5255442ae2b..f54a05b7a61d 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -183,7 +183,7 @@ static unsigned long zone_nr_lru_pages(struct zone *zone, */ void register_shrinker(struct shrinker *shrinker) { - shrinker->nr = 0; + atomic_long_set(&shrinker->nr_in_batch, 0); down_write(&shrinker_rwsem); list_add_tail(&shrinker->list, &shrinker_list); up_write(&shrinker_rwsem); @@ -264,9 +264,7 @@ unsigned long shrink_slab(struct shrink_control *shrink, * and zero it so that other concurrent shrinker invocations * don't also do this scanning work. */ - do { - nr = shrinker->nr; - } while (cmpxchg(&shrinker->nr, nr, 0) != nr); + nr = atomic_long_xchg(&shrinker->nr_in_batch, 0); total_scan = nr; delta = (4 * nr_pages_scanned) / shrinker->seeks; @@ -328,12 +326,11 @@ unsigned long shrink_slab(struct shrink_control *shrink, * manner that handles concurrent updates. If we exhausted the * scan, there is no need to do an update. */ - do { - nr = shrinker->nr; - new_nr = total_scan + nr; - if (total_scan <= 0) - break; - } while (cmpxchg(&shrinker->nr, nr, new_nr) != nr); + if (total_scan > 0) + new_nr = atomic_long_add_return(total_scan, + &shrinker->nr_in_batch); + else + new_nr = atomic_long_read(&shrinker->nr_in_batch); trace_mm_shrink_slab_end(shrinker, shrink_ret, nr, new_nr); } -- cgit v1.2.3-70-g09d2 From b53fc7c2974a50913f49e1d800fe904a28c338e3 Mon Sep 17 00:00:00 2001 From: Claudio Scordino Date: Thu, 8 Dec 2011 14:33:56 -0800 Subject: fs/proc/meminfo.c: fix compilation error Fix the error message "directives may not be used inside a macro argument" which appears when the kernel is compiled for the cris architecture. Signed-off-by: Claudio Scordino Cc: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/meminfo.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c index 586174168e2a..80e4645f7990 100644 --- a/fs/proc/meminfo.c +++ b/fs/proc/meminfo.c @@ -131,12 +131,13 @@ static int meminfo_proc_show(struct seq_file *m, void *v) K(i.freeswap), K(global_page_state(NR_FILE_DIRTY)), K(global_page_state(NR_WRITEBACK)), - K(global_page_state(NR_ANON_PAGES) #ifdef CONFIG_TRANSPARENT_HUGEPAGE + K(global_page_state(NR_ANON_PAGES) + global_page_state(NR_ANON_TRANSPARENT_HUGEPAGES) * - HPAGE_PMD_NR + HPAGE_PMD_NR), +#else + K(global_page_state(NR_ANON_PAGES)), #endif - ), K(global_page_state(NR_FILE_MAPPED)), K(global_page_state(NR_SHMEM)), K(global_page_state(NR_SLAB_RECLAIMABLE) + -- cgit v1.2.3-70-g09d2 From 1dfb059b9438633b0546c5431538a47f6ed99028 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Thu, 8 Dec 2011 14:33:57 -0800 Subject: thp: reduce khugepaged freezing latency khugepaged can sometimes cause suspend to fail, requiring that the user retry the suspend operation. Use wait_event_freezable_timeout() instead of schedule_timeout_interruptible() to avoid missing freezer wakeups. A try_to_freeze() would have been needed in the khugepaged_alloc_hugepage tight loop too in case of the allocation failing repeatedly, and wait_event_freezable_timeout will provide it too. khugepaged would still freeze just fine by trying again the next minute but it's better if it freezes immediately. Reported-by: Jiri Slaby Signed-off-by: Andrea Arcangeli Tested-by: Jiri Slaby Cc: Tejun Heo Cc: Oleg Nesterov Cc: "Srivatsa S. Bhat" Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/huge_memory.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/mm/huge_memory.c b/mm/huge_memory.c index 4298abaae153..36b3d988b4ef 100644 --- a/mm/huge_memory.c +++ b/mm/huge_memory.c @@ -2259,12 +2259,8 @@ static void khugepaged_do_scan(struct page **hpage) static void khugepaged_alloc_sleep(void) { - DEFINE_WAIT(wait); - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_alloc_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_alloc_sleep_millisecs)); } #ifndef CONFIG_NUMA @@ -2313,14 +2309,10 @@ static void khugepaged_loop(void) if (unlikely(kthread_should_stop())) break; if (khugepaged_has_work()) { - DEFINE_WAIT(wait); if (!khugepaged_scan_sleep_millisecs) continue; - add_wait_queue(&khugepaged_wait, &wait); - schedule_timeout_interruptible( - msecs_to_jiffies( - khugepaged_scan_sleep_millisecs)); - remove_wait_queue(&khugepaged_wait, &wait); + wait_event_freezable_timeout(khugepaged_wait, false, + msecs_to_jiffies(khugepaged_scan_sleep_millisecs)); } else if (khugepaged_enabled()) wait_event_freezable(khugepaged_wait, khugepaged_wait_event()); -- cgit v1.2.3-70-g09d2 From 1de8ad43d0048963d0a0adf14bb046340426b1e4 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 8 Dec 2011 14:34:00 -0800 Subject: CREDITS: update Kees's expired fingerprint and fix details Small clean-up for my CREDITS entry; the GPG fingerprint was not up to date, so I fixed other details at the same time too. Signed-off-by: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- CREDITS | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/CREDITS b/CREDITS index 07e32a87d956..44fce988eaac 100644 --- a/CREDITS +++ b/CREDITS @@ -688,10 +688,13 @@ S: Oxfordshire, UK. N: Kees Cook E: kees@outflux.net -W: http://outflux.net/ -P: 1024D/17063E6D 9FA3 C49C 23C9 D1BC 2E30 1975 1FFF 4BA9 1706 3E6D -D: Minor updates to SCSI types, added /proc/pid/maps protection +E: kees@ubuntu.com +E: keescook@chromium.org +W: http://outflux.net/blog/ +P: 4096R/DC6DC026 A5C3 F68F 229D D60F 723E 6E13 8972 F4DF DC6D C026 +D: Various security things, bug fixes, and documentation. S: (ask for current address) +S: Portland, Oregon S: USA N: Robin Cornelius -- cgit v1.2.3-70-g09d2 From 2dbcd05f1e9e0932833d16dab1696176fc164b07 Mon Sep 17 00:00:00 2001 From: Jonghwan Choi Date: Thu, 8 Dec 2011 14:34:02 -0800 Subject: drivers/rtc/rtc-s3c.c: fix driver clock enable/disable balance issues If an error occurs after the clock is enabled, the enable/disable state can become unbalanced. Signed-off-by: Jonghwan Choi Cc: Alessandro Zummo Acked-by: Kukjin Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-s3c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 7639ab906f02..5b979d9cc332 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -202,7 +202,6 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) void __iomem *base = s3c_rtc_base; int year = tm->tm_year - 100; - clk_enable(rtc_clk); pr_debug("set time %04d.%02d.%02d %02d:%02d:%02d\n", 1900 + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_hour, tm->tm_min, tm->tm_sec); @@ -214,6 +213,7 @@ static int s3c_rtc_settime(struct device *dev, struct rtc_time *tm) return -EINVAL; } + clk_enable(rtc_clk); writeb(bin2bcd(tm->tm_sec), base + S3C2410_RTCSEC); writeb(bin2bcd(tm->tm_min), base + S3C2410_RTCMIN); writeb(bin2bcd(tm->tm_hour), base + S3C2410_RTCHOUR); -- cgit v1.2.3-70-g09d2 From c193c82f054195aa352ccbef91afc28446e5a30e Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Thu, 8 Dec 2011 14:34:10 -0800 Subject: memcg: update maintainers More players joined to memory cgroup developments and Johannes' great work changed internal design of memory cgroup dramatically. And he will do more works. Michal Hokko did many bug fixes and know memory cgroup very well. Daisuke Nishimura helped us very much but he seems busy now. Thanks to his works. Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Acked-by: Johannes Weiner Acked-by: Daisuke Nishimura Cc: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- MAINTAINERS | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index b4f18024f4e7..6751a36f569f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4302,8 +4302,9 @@ F: include/linux/mm.h F: mm/ MEMORY RESOURCE CONTROLLER +M: Johannes Weiner +M: Michal Hocko M: Balbir Singh -M: Daisuke Nishimura M: KAMEZAWA Hiroyuki L: cgroups@vger.kernel.org L: linux-mm@kvack.org -- cgit v1.2.3-70-g09d2 From 09dc3cf93f7d16fdd37a0ad8486faebb5e2769ec Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 8 Dec 2011 14:34:13 -0800 Subject: printk: avoid double lock acquire Commit 4f2a8d3cf5e ("printk: Fix console_sem vs logbuf_lock unlock race") introduced another silly bug where we would want to acquire an already held lock. Avoid this. Reported-by: Andrea Arcangeli Signed-off-by: Peter Zijlstra Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/printk.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/printk.c b/kernel/printk.c index 1455a0d4eedd..7982a0a841ea 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1293,10 +1293,11 @@ again: raw_spin_lock(&logbuf_lock); if (con_start != log_end) retry = 1; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + if (retry && console_trylock()) goto again; - raw_spin_unlock_irqrestore(&logbuf_lock, flags); if (wake_klogd) wake_up_klogd(); } -- cgit v1.2.3-70-g09d2 From b6999b19120931ede364fa3b685e698a61fed31d Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:16 -0800 Subject: thp: add compound tail page _mapcount when mapped With the 3.2-rc kernel, IOMMU 2M pages in KVM works. But when I tried to use IOMMU 1GB pages in KVM, I encountered an oops and the 1GB page failed to be used. The root cause is that 1GB page allocation calls gup_huge_pud() while 2M page calls gup_huge_pmd. If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that. So when the mapped page is relesed, it will result in kernel oops because the page is not marked mapped. This patch add tail process for compound page in 1GB huge page which keeps the same process as 2M page. Reproduce like: 1. Add grub boot option: hugepagesz=1G hugepages=8 2. mount -t hugetlbfs -o pagesize=1G hugetlbfs /dev/hugepages 3. qemu-kvm -m 2048 -hda os-kvm.img -cpu kvm64 -smp 4 -mem-path /dev/hugepages -net none -device pci-assign,host=07:00.1 kernel BUG at mm/swap.c:114! invalid opcode: 0000 [#1] SMP Call Trace: put_page+0x15/0x37 kvm_release_pfn_clean+0x31/0x36 kvm_iommu_put_pages+0x94/0xb1 kvm_iommu_unmap_memslots+0x80/0xb6 kvm_assign_device+0xba/0x117 kvm_vm_ioctl_assigned_device+0x301/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP put_compound_page+0xd4/0x168 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Andi Kleen Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/x86/mm/gup.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index ea305856151c..dd74e46828c0 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -201,6 +201,8 @@ static noinline int gup_huge_pud(pud_t pud, unsigned long addr, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v1.2.3-70-g09d2 From 58a84aa92723d1ac3e1cc4e3b0ff49291663f7e1 Mon Sep 17 00:00:00 2001 From: Youquan Song Date: Thu, 8 Dec 2011 14:34:18 -0800 Subject: thp: set compound tail page _count to zero Commit 70b50f94f1644 ("mm: thp: tail page refcounting fix") keeps all page_tail->_count zero at all times. But the current kernel does not set page_tail->_count to zero if a 1GB page is utilized. So when an IOMMU 1GB page is used by KVM, it wil result in a kernel oops because a tail page's _count does not equal zero. kernel BUG at include/linux/mm.h:386! invalid opcode: 0000 [#1] SMP Call Trace: gup_pud_range+0xb8/0x19d get_user_pages_fast+0xcb/0x192 ? trace_hardirqs_off+0xd/0xf hva_to_pfn+0x119/0x2f2 gfn_to_pfn_memslot+0x2c/0x2e kvm_iommu_map_pages+0xfd/0x1c1 kvm_iommu_map_memslots+0x7c/0xbd kvm_iommu_map_guest+0xaa/0xbf kvm_vm_ioctl_assigned_device+0x2ef/0xa47 kvm_vm_ioctl+0x36c/0x3a2 do_vfs_ioctl+0x49e/0x4e4 sys_ioctl+0x5a/0x7c system_call_fastpath+0x16/0x1b RIP gup_huge_pud+0xf2/0x159 Signed-off-by: Youquan Song Reviewed-by: Andrea Arcangeli Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 1 + mm/page_alloc.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bb28a5f9db8d..73f17c0293c0 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -576,6 +576,7 @@ static void prep_compound_gigantic_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++, p = mem_map_next(p, page, i)) { __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9dd443d89d8b..850009a7101e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -356,8 +356,8 @@ void prep_compound_page(struct page *page, unsigned long order) __SetPageHead(page); for (i = 1; i < nr_pages; i++) { struct page *p = page + i; - __SetPageTail(p); + set_page_count(p, 0); p->first_page = page; } } -- cgit v1.2.3-70-g09d2 From 09761333ed47e899cc1482c13090b95f3f711971 Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Thu, 8 Dec 2011 14:34:20 -0800 Subject: mm/migrate.c: pair unlock_page() and lock_page() when migrating huge pages Avoid unlocking and unlocked page if we failed to lock it. Signed-off-by: Hillf Danton Cc: Naoya Horiguchi Cc: Andrea Arcangeli Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/migrate.c b/mm/migrate.c index 578e29174fa6..177aca424a06 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -871,9 +871,9 @@ static int unmap_and_move_huge_page(new_page_t get_new_page, if (anon_vma) put_anon_vma(anon_vma); -out: unlock_page(hpage); +out: if (rc != -EAGAIN) { list_del(&hpage->lru); put_page(hpage); -- cgit v1.2.3-70-g09d2 From d021563888312018ca65681096f62e36c20e63cc Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:27 -0800 Subject: mm: Ensure that pfn_valid() is called once per pageblock when reserving pageblocks setup_zone_migrate_reserve() expects that zone->start_pfn starts at pageblock_nr_pages aligned pfn otherwise we could access beyond an existing memblock resulting in the following panic if CONFIG_HOLES_IN_ZONE is not configured and we do not check pfn_valid: IP: [] setup_zone_migrate_reserve+0xcd/0x180 *pdpt = 0000000000000000 *pde = f000ff53f000ff53 Oops: 0000 [#1] SMP Pid: 1, comm: swapper Not tainted 3.0.7-0.7-pae #1 VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform EIP: 0060:[] EFLAGS: 00010006 CPU: 0 EIP is at setup_zone_migrate_reserve+0xcd/0x180 EAX: 000c0000 EBX: f5801fc0 ECX: 000c0000 EDX: 00000000 ESI: 000c01fe EDI: 000c01fe EBP: 00140000 ESP: f2475f58 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 1, ti=f2474000 task=f2472cd0 task.ti=f2474000) Call Trace: [] __setup_per_zone_wmarks+0xec/0x160 [] setup_per_zone_wmarks+0xf/0x20 [] init_per_zone_wmark_min+0x27/0x86 [] do_one_initcall+0x2b/0x160 [] kernel_init+0xbe/0x157 [] kernel_thread_helper+0x6/0xd Code: a5 39 f5 89 f7 0f 46 fd 39 cf 76 40 8b 03 f6 c4 08 74 32 eb 91 90 89 c8 c1 e8 0e 0f be 80 80 2f 86 c0 8b 14 85 60 2f 86 c0 89 c8 <2b> 82 b4 12 00 00 c1 e0 05 03 82 ac 12 00 00 8b 00 f6 c4 08 0f EIP: [] setup_zone_migrate_reserve+0xcd/0x180 SS:ESP 0068:f2475f58 CR2: 00000000000012b4 We crashed in pageblock_is_reserved() when accessing pfn 0xc0000 because highstart_pfn = 0x36ffe. The issue was introduced in 3.0-rc1 by 6d3163ce ("mm: check if any page in a pageblock is reserved before marking it MIGRATE_RESERVE"). Make sure that start_pfn is always aligned to pageblock_nr_pages to ensure that pfn_valid s always called at the start of each pageblock. Architectures with holes in pageblocks will be correctly handled by pfn_valid_within in pageblock_is_reserved. Signed-off-by: Michal Hocko Signed-off-by: Mel Gorman Tested-by: Dang Bo Reviewed-by: KAMEZAWA Hiroyuki Cc: Andrea Arcangeli Cc: David Rientjes Cc: Arve Hjnnevg Cc: KOSAKI Motohiro Cc: John Stultz Cc: Dave Hansen Cc: [3.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/page_alloc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 850009a7101e..2b8ba3aebf6e 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3377,9 +3377,15 @@ static void setup_zone_migrate_reserve(struct zone *zone) unsigned long block_migratetype; int reserve; - /* Get the start pfn, end pfn and the number of blocks to reserve */ + /* + * Get the start pfn, end pfn and the number of blocks to reserve + * We have to be careful to be aligned to pageblock_nr_pages to + * make sure that we always check pfn_valid for the first page in + * the block. + */ start_pfn = zone->zone_start_pfn; end_pfn = start_pfn + zone->spanned_pages; + start_pfn = roundup(start_pfn, pageblock_nr_pages); reserve = roundup(min_wmark_pages(zone), pageblock_nr_pages) >> pageblock_order; -- cgit v1.2.3-70-g09d2 From 1368edf0647ac112d8cfa6ce47257dc950c50f5c Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 8 Dec 2011 14:34:30 -0800 Subject: mm: vmalloc: check for page allocation failure before vmlist insertion Commit f5252e00 ("mm: avoid null pointer access in vm_struct via /proc/vmallocinfo") adds newly allocated vm_structs to the vmlist after it is fully initialised. Unfortunately, it did not check that __vmalloc_area_node() successfully populated the area. In the event of allocation failure, the vmalloc area is freed but the pointer to freed memory is inserted into the vmlist leading to a a crash later in get_vmalloc_info(). This patch adds a check for ____vmalloc_area_node() failure within __vmalloc_node_range. It does not use "goto fail" as in the previous error path as a warning was already displayed by __vmalloc_area_node() before it called vfree in its failure path. Credit goes to Luciano Chavez for doing all the real work of identifying exactly where the problem was. Signed-off-by: Mel Gorman Reported-by: Luciano Chavez Tested-by: Luciano Chavez Reviewed-by: Rik van Riel Acked-by: David Rientjes Cc: [3.1.x+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 3231bf332878..1d8b32f07139 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1633,6 +1633,8 @@ void *__vmalloc_node_range(unsigned long size, unsigned long align, goto fail; addr = __vmalloc_area_node(area, gfp_mask, prot, node, caller); + if (!addr) + return NULL; /* * In this function, newly allocated vm_struct is not added -- cgit v1.2.3-70-g09d2 From 2a95ea6c0d129b4568fb64e1deda16ceb20e6636 Mon Sep 17 00:00:00 2001 From: Michal Hocko Date: Thu, 8 Dec 2011 14:34:32 -0800 Subject: procfs: do not overflow get_{idle,iowait}_time for nohz Since commit a25cac5198d4 ("proc: Consider NO_HZ when printing idle and iowait times") we are reporting idle/io_wait time also while a CPU is tickless. We rely on get_{idle,iowait}_time functions to retrieve proper data. These functions, however, use usecs_to_cputime to translate micro seconds time to cputime64_t. This is just an alias to usecs_to_jiffies which reduces the data type from u64 to unsigned int and also checks whether the given parameter overflows jiffies_to_usecs(MAX_JIFFY_OFFSET) and returns MAX_JIFFY_OFFSET in that case. When we overflow depends on CONFIG_HZ but especially for CONFIG_HZ_300 it is quite low (1431649781) so we are getting MAX_JIFFY_OFFSET for >3000s! until we overflow unsigned int. Just for reference CONFIG_HZ_100 has an overflow window around 20s, CONFIG_HZ_250 ~8s and CONFIG_HZ_1000 ~2s. This results in a bug when people saw [h]top going mad reporting 100% CPU usage even though there was basically no CPU load. The reason was simply that /proc/stat stopped reporting idle/io_wait changes (and reported MAX_JIFFY_OFFSET) and so the only change happening was for user system time. Let's use nsecs_to_jiffies64 instead which doesn't reduce the precision to 32b type and it is much more appropriate for cumulative time values (unlike usecs_to_jiffies which intended for timeout calculations). Signed-off-by: Michal Hocko Tested-by: Artem S. Tashkinov Cc: Dave Jones Cc: Arnd Bergmann Cc: Alexey Dobriyan Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/stat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/proc/stat.c b/fs/proc/stat.c index 42b274da92c3..2a30d67dd6b8 100644 --- a/fs/proc/stat.c +++ b/fs/proc/stat.c @@ -32,7 +32,7 @@ static cputime64_t get_idle_time(int cpu) idle = kstat_cpu(cpu).cpustat.idle; idle = cputime64_add(idle, arch_idle_time(cpu)); } else - idle = usecs_to_cputime(idle_time); + idle = nsecs_to_jiffies64(1000 * idle_time); return idle; } @@ -46,7 +46,7 @@ static cputime64_t get_iowait_time(int cpu) /* !NO_HZ so we can rely on cpustat.iowait */ iowait = kstat_cpu(cpu).cpustat.iowait; else - iowait = usecs_to_cputime(iowait_time); + iowait = nsecs_to_jiffies64(1000 * iowait_time); return iowait; } -- cgit v1.2.3-70-g09d2 From ceb96398127f3388cb5815b2ab550196e2be5d68 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:35 -0800 Subject: rapidio/tsi721: switch to dma_zalloc_coherent Replace the pair dma_alloc_coherent()+memset() with the new dma_zalloc_coherent() added by Andrew Morton for kernel version 3.2 Signed-off-by: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 17 ++++------------- 1 file changed, 4 insertions(+), 13 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 5225930a10cd..514c28c81420 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -851,14 +851,12 @@ static int tsi721_doorbell_init(struct tsi721_device *priv) INIT_WORK(&priv->idb_work, tsi721_db_dpc); /* Allocate buffer for inbound doorbells queue */ - priv->idb_base = dma_alloc_coherent(&priv->pdev->dev, + priv->idb_base = dma_zalloc_coherent(&priv->pdev->dev, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE, &priv->idb_dma, GFP_KERNEL); if (!priv->idb_base) return -ENOMEM; - memset(priv->idb_base, 0, IDB_QSIZE * TSI721_IDB_ENTRY_SIZE); - dev_dbg(&priv->pdev->dev, "Allocated IDB buffer @ %p (phys = %llx)\n", priv->idb_base, (unsigned long long)priv->idb_dma); @@ -904,7 +902,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) */ /* Allocate space for DMA descriptors */ - bd_ptr = dma_alloc_coherent(&priv->pdev->dev, + bd_ptr = dma_zalloc_coherent(&priv->pdev->dev, bd_num * sizeof(struct tsi721_dma_desc), &bd_phys, GFP_KERNEL); if (!bd_ptr) @@ -913,8 +911,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].bd_phys = bd_phys; priv->bdma[chnum].bd_base = bd_ptr; - memset(bd_ptr, 0, bd_num * sizeof(struct tsi721_dma_desc)); - dev_dbg(&priv->pdev->dev, "DMA descriptors @ %p (phys = %llx)\n", bd_ptr, (unsigned long long)bd_phys); @@ -922,7 +918,7 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) sts_size = (bd_num >= TSI721_DMA_MINSTSSZ) ? bd_num : TSI721_DMA_MINSTSSZ; sts_size = roundup_pow_of_two(sts_size); - sts_ptr = dma_alloc_coherent(&priv->pdev->dev, + sts_ptr = dma_zalloc_coherent(&priv->pdev->dev, sts_size * sizeof(struct tsi721_dma_sts), &sts_phys, GFP_KERNEL); if (!sts_ptr) { @@ -938,8 +934,6 @@ static int tsi721_bdma_ch_init(struct tsi721_device *priv, int chnum) priv->bdma[chnum].sts_base = sts_ptr; priv->bdma[chnum].sts_size = sts_size; - memset(sts_ptr, 0, sts_size); - dev_dbg(&priv->pdev->dev, "desc status FIFO @ %p (phys = %llx) size=0x%x\n", sts_ptr, (unsigned long long)sts_phys, sts_size); @@ -1400,7 +1394,7 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, /* Outbound message descriptor status FIFO allocation */ priv->omsg_ring[mbox].sts_size = roundup_pow_of_two(entries + 1); - priv->omsg_ring[mbox].sts_base = dma_alloc_coherent(&priv->pdev->dev, + priv->omsg_ring[mbox].sts_base = dma_zalloc_coherent(&priv->pdev->dev, priv->omsg_ring[mbox].sts_size * sizeof(struct tsi721_dma_sts), &priv->omsg_ring[mbox].sts_phys, GFP_KERNEL); @@ -1412,9 +1406,6 @@ static int tsi721_open_outb_mbox(struct rio_mport *mport, void *dev_id, goto out_desc; } - memset(priv->omsg_ring[mbox].sts_base, 0, - entries * sizeof(struct tsi721_dma_sts)); - /* * Configure Outbound Messaging Engine */ -- cgit v1.2.3-70-g09d2 From b439e66f04bff6476c5d4bae6a52ab93fbb9a8f4 Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:36 -0800 Subject: rapidio/tsi721: fix mailbox resource reporting Bug fix for Tsi721 RapidIO mport driver: Tsi721 supports four RapidIO mailboxes (MBOX0 - MBOX3) as defined by RapidIO specification. Mailbox resources has to be properly reported to allow use of all available mailboxes (initial version reports only MBOX0). This patch is applicable to kernel versions staring from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 514c28c81420..83ac8728b781 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2107,8 +2107,8 @@ static int __devinit tsi721_setup_mport(struct tsi721_device *priv) INIT_LIST_HEAD(&mport->dbells); rio_init_dbell_res(&mport->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); - rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 0); - rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0); + rio_init_mbox_res(&mport->riores[RIO_INB_MBOX_RESOURCE], 0, 3); + rio_init_mbox_res(&mport->riores[RIO_OUTB_MBOX_RESOURCE], 0, 3); strcpy(mport->name, "Tsi721 mport"); /* Hook up interrupt handler */ -- cgit v1.2.3-70-g09d2 From 1cee22b7f385b6c4f716846203a96e1f302132aa Mon Sep 17 00:00:00 2001 From: Alexandre Bounine Date: Thu, 8 Dec 2011 14:34:42 -0800 Subject: rapidio/tsi721: modify PCIe capability settings Modify initialization of PCIe capability registers in Tsi721 mport driver: - change Completion Timeout value to avoid unexpected data transfer aborts during intensive traffic. - replace hardcoded offset of PCIe capability block by making it use the common function. This patch is applicable to kernel versions starting from 3.2-rc1. Signed-off-by: Alexandre Bounine Cc: Matt Porter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rapidio/devices/tsi721.c | 20 +++++++++++++++----- drivers/rapidio/devices/tsi721.h | 2 ++ 2 files changed, 17 insertions(+), 5 deletions(-) diff --git a/drivers/rapidio/devices/tsi721.c b/drivers/rapidio/devices/tsi721.c index 83ac8728b781..691b1ab1a3d0 100644 --- a/drivers/rapidio/devices/tsi721.c +++ b/drivers/rapidio/devices/tsi721.c @@ -2154,7 +2154,7 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct tsi721_device *priv; - int i; + int i, cap; int err; u32 regval; @@ -2262,10 +2262,20 @@ static int __devinit tsi721_probe(struct pci_dev *pdev, dev_info(&pdev->dev, "Unable to set consistent DMA mask\n"); } - /* Clear "no snoop" and "relaxed ordering" bits. */ - pci_read_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, ®val); - regval &= ~(PCI_EXP_DEVCTL_RELAX_EN | PCI_EXP_DEVCTL_NOSNOOP_EN); - pci_write_config_dword(pdev, 0x40 + PCI_EXP_DEVCTL, regval); + cap = pci_pcie_cap(pdev); + BUG_ON(cap == 0); + + /* Clear "no snoop" and "relaxed ordering" bits, use default MRRS. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL, ®val); + regval &= ~(PCI_EXP_DEVCTL_READRQ | PCI_EXP_DEVCTL_RELAX_EN | + PCI_EXP_DEVCTL_NOSNOOP_EN); + regval |= 0x2 << MAX_READ_REQUEST_SZ_SHIFT; + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL, regval); + + /* Adjust PCIe completion timeout. */ + pci_read_config_dword(pdev, cap + PCI_EXP_DEVCTL2, ®val); + regval &= ~(0x0f); + pci_write_config_dword(pdev, cap + PCI_EXP_DEVCTL2, regval | 0x2); /* * FIXUP: correct offsets of MSI-X tables in the MSI-X Capability Block diff --git a/drivers/rapidio/devices/tsi721.h b/drivers/rapidio/devices/tsi721.h index 58be4deb1402..822e54c394d5 100644 --- a/drivers/rapidio/devices/tsi721.h +++ b/drivers/rapidio/devices/tsi721.h @@ -72,6 +72,8 @@ #define TSI721_MSIXPBA_OFFSET 0x2a000 #define TSI721_PCIECFG_EPCTL 0x400 +#define MAX_READ_REQUEST_SZ_SHIFT 12 + /* * Event Management Registers */ -- cgit v1.2.3-70-g09d2 From 031af165b1cd295ef04d2bfbcae9bc3cb9180735 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 8 Dec 2011 14:34:44 -0800 Subject: sys_getppid: add missing rcu_dereference In order to safely dereference current->real_parent inside an rcu_read_lock, we need an rcu_dereference. Signed-off-by: Mandeep Singh Baines Cc: Thomas Gleixner Cc: Pavel Emelyanov Cc: Oleg Nesterov Cc: Kees Cook Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/timer.c b/kernel/timer.c index dbaa62422b13..9c3c62b0c4bc 100644 --- a/kernel/timer.c +++ b/kernel/timer.c @@ -1368,7 +1368,7 @@ SYSCALL_DEFINE0(getppid) int pid; rcu_read_lock(); - pid = task_tgid_vnr(current->real_parent); + pid = task_tgid_vnr(rcu_dereference(current->real_parent)); rcu_read_unlock(); return pid; -- cgit v1.2.3-70-g09d2 From 5dbc8fca8ef5d719014f22345d990e957dcfc692 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 9 Dec 2011 11:07:37 -0500 Subject: Btrfs: fix btrfs_end_bio to deal with write errors to a single mirror btrfs_end_bio checks the number of errors on a bio against the max number of errors allowed before sending any EIOs up to the higher levels. If we got enough copies of the bio done for a given raid level, it is supposed to clear the bio error flag and return success. We have pointers to the original bio sent down by the higher layers and pointers to any cloned bios we made for raid purposes. If the original bio happens to be the one that got an io error, but not the last one to finish, it might not have the BIO_UPTODATE bit set. Then, when the last bio does finish, we'll call bio_end_io on the original bio. It won't have the uptodate bit set and we'll end up sending EIO to the higher layers. We already had a check for this, it just was conditional on getting the IO error on the very last bio. Make the check unconditional so we eat the EIOs properly. Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 0a8c8f8304b1..91ea57a1474a 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3258,7 +3258,7 @@ static void btrfs_end_bio(struct bio *bio, int err) */ if (atomic_read(&bbio->error) > bbio->max_errors) { err = -EIO; - } else if (err) { + } else { /* * this bio is actually up to date, we didn't * go over the max number of errors -- cgit v1.2.3-70-g09d2 From 4b44b40e04a758e2242ff4a3f7c15982801ec8bc Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 9 Dec 2011 16:31:52 -0500 Subject: NFSv4: Ensure correct locking when accessing the 'lock_states' list There are currently 2 places in the state recovery code, where we do not take sufficient precautions before accessing the state->lock_states. In both cases, we should be holding the state->state_lock. Reported-by: Pascal Bouchareine Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index da8d73ed9e0f..6a7107ae6b72 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1156,11 +1156,13 @@ restart: if (status >= 0) { status = nfs4_reclaim_locks(state, ops); if (status >= 0) { + spin_lock(&state->state_lock); list_for_each_entry(lock, &state->lock_states, ls_locks) { if (!(lock->ls_flags & NFS_LOCK_INITIALIZED)) printk("%s: Lock reclaim failed!\n", __func__); } + spin_unlock(&state->state_lock); nfs4_put_open_state(state); goto restart; } @@ -1224,10 +1226,12 @@ static void nfs4_clear_open_state(struct nfs4_state *state) clear_bit(NFS_O_RDONLY_STATE, &state->flags); clear_bit(NFS_O_WRONLY_STATE, &state->flags); clear_bit(NFS_O_RDWR_STATE, &state->flags); + spin_lock(&state->state_lock); list_for_each_entry(lock, &state->lock_states, ls_locks) { lock->ls_seqid.flags = 0; lock->ls_flags &= ~NFS_LOCK_INITIALIZED; } + spin_unlock(&state->state_lock); } static void nfs4_reset_seqids(struct nfs_server *server, -- cgit v1.2.3-70-g09d2 From 9aa7705c966c750dda3d5c8d8a20f8e46668911c Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Sun, 27 Nov 2011 15:42:15 -0300 Subject: [media] [trivial] omap24xxcam-dma: Fix logical test Likely misuse of & vs &&. Signed-off-by: Joe Perches Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap24xxcam-dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/omap24xxcam-dma.c b/drivers/media/video/omap24xxcam-dma.c index 1d54b86c936b..3ea38a8def8e 100644 --- a/drivers/media/video/omap24xxcam-dma.c +++ b/drivers/media/video/omap24xxcam-dma.c @@ -506,7 +506,7 @@ int omap24xxcam_sgdma_queue(struct omap24xxcam_sgdma *sgdma, unsigned long flags; struct sgdma_state *sg_state; - if ((sglen < 0) || ((sglen > 0) & !sglist)) + if ((sglen < 0) || ((sglen > 0) && !sglist)) return -EINVAL; spin_lock_irqsave(&sgdma->lock, flags); -- cgit v1.2.3-70-g09d2 From dc47ce90c3a822cd7c9e9339fe4d5f61dcb26b50 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 9 Dec 2011 15:09:32 -0800 Subject: Linux 3.2-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 12aafc20efbd..d1ea73f74c2f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 652f89f64fabcdae9143ee2b4253cfa838fb0279 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 9 Dec 2011 19:05:58 -0500 Subject: NFSv4: Do not accept delegated opens when a delegation recall is in effect ...and report the servers that try to return a delegation when the client is using the CLAIM_DELEG_CUR open mode. That behaviour is explicitly forbidden in RFC3530. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index be2bbac13817..d9f4d78c3413 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -39,6 +39,8 @@ #include #include #include +#include +#include #include #include #include @@ -894,6 +896,8 @@ out: static int can_open_delegated(struct nfs_delegation *delegation, fmode_t fmode) { + if (delegation == NULL) + return 0; if ((delegation->type & fmode) != fmode) return 0; if (test_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags)) @@ -1036,8 +1040,7 @@ static struct nfs4_state *nfs4_try_open_cached(struct nfs4_opendata *opendata) } rcu_read_lock(); delegation = rcu_dereference(nfsi->delegation); - if (delegation == NULL || - !can_open_delegated(delegation, fmode)) { + if (!can_open_delegated(delegation, fmode)) { rcu_read_unlock(); break; } @@ -1091,7 +1094,12 @@ static struct nfs4_state *nfs4_opendata_to_nfs4_state(struct nfs4_opendata *data if (delegation) delegation_flags = delegation->flags; rcu_read_unlock(); - if ((delegation_flags & 1UL<o_arg.claim == NFS4_OPEN_CLAIM_DELEGATE_CUR) { + pr_err_ratelimited("NFS: Broken NFSv4 server %s is " + "returning a delegation for " + "OPEN(CLAIM_DELEGATE_CUR)\n", + NFS_CLIENT(inode)->cl_server); + } else if ((delegation_flags & 1UL<inode, data->owner->so_cred, &data->o_res); @@ -1423,11 +1431,9 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) goto out_no_action; rcu_read_lock(); delegation = rcu_dereference(NFS_I(data->state->inode)->delegation); - if (delegation != NULL && - test_bit(NFS_DELEGATION_NEED_RECLAIM, &delegation->flags) == 0) { - rcu_read_unlock(); - goto out_no_action; - } + if (data->o_arg.claim != NFS4_OPEN_CLAIM_DELEGATE_CUR && + can_open_delegated(delegation, data->o_arg.fmode)) + goto unlock_no_action; rcu_read_unlock(); } /* Update sequence id. */ @@ -1444,6 +1450,8 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) return; rpc_call_start(task); return; +unlock_no_action: + rcu_read_unlock(); out_no_action: task->tk_action = NULL; -- cgit v1.2.3-70-g09d2 From 6d3e32e63f1fb47b3ba104d13dfac116df7b2bbb Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Thu, 8 Dec 2011 12:10:50 +0000 Subject: x86, efi: Make efi_call_phys_{prelog,epilog} CONFIG_RELOCATABLE-aware efi_call_phys_prelog() sets up a 1:1 mapping of the physical address range in swapper_pg_dir. Instead of replacing then restoring entries in swapper_pg_dir we should be using initial_page_table which already contains the 1:1 mapping. It's safe to blindly switch back to swapper_pg_dir in the epilog because the physical EFI routines are only called before efi_enter_virtual_mode(), e.g. before any user processes have been forked. Therefore, we don't need to track which pgd was in %cr3 when we entered the prelog. The previous code actually contained a bug because it assumed that the kernel was loaded at a physical address within the first 8MB of ram, usually at 0x100000. However, this isn't the case with a CONFIG_RELOCATABLE=y kernel which could have been loaded anywhere in the physical address space. Also delete the ancient (and bogus) comments about the page table being restored after the lock is released. There is no locking. Cc: Matthew Garrett Cc: Darrent Hart Signed-off-by: Matt Fleming Link: http://lkml.kernel.org/r/1323346250.3894.74.camel@mfleming-mobl1.ger.corp.intel.com Signed-off-by: H. Peter Anvin --- arch/x86/platform/efi/efi_32.c | 48 ++---------------------------------------- 1 file changed, 2 insertions(+), 46 deletions(-) diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c index e36bf714cb77..40e446941dd7 100644 --- a/arch/x86/platform/efi/efi_32.c +++ b/arch/x86/platform/efi/efi_32.c @@ -39,43 +39,14 @@ */ static unsigned long efi_rt_eflags; -static pgd_t efi_bak_pg_dir_pointer[2]; void efi_call_phys_prelog(void) { - unsigned long cr4; - unsigned long temp; struct desc_ptr gdt_descr; local_irq_save(efi_rt_eflags); - /* - * If I don't have PAE, I should just duplicate two entries in page - * directory. If I have PAE, I just need to duplicate one entry in - * page directory. - */ - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - swapper_pg_dir[0].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - } else { - efi_bak_pg_dir_pointer[0].pgd = - swapper_pg_dir[pgd_index(0)].pgd; - efi_bak_pg_dir_pointer[1].pgd = - swapper_pg_dir[pgd_index(0x400000)].pgd; - swapper_pg_dir[pgd_index(0)].pgd = - swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd; - temp = PAGE_OFFSET + 0x400000; - swapper_pg_dir[pgd_index(0x400000)].pgd = - swapper_pg_dir[pgd_index(temp)].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(initial_page_table); __flush_tlb_all(); gdt_descr.address = __pa(get_cpu_gdt_table(0)); @@ -85,28 +56,13 @@ void efi_call_phys_prelog(void) void efi_call_phys_epilog(void) { - unsigned long cr4; struct desc_ptr gdt_descr; gdt_descr.address = (unsigned long)get_cpu_gdt_table(0); gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); - cr4 = read_cr4_safe(); - - if (cr4 & X86_CR4_PAE) { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - } else { - swapper_pg_dir[pgd_index(0)].pgd = - efi_bak_pg_dir_pointer[0].pgd; - swapper_pg_dir[pgd_index(0x400000)].pgd = - efi_bak_pg_dir_pointer[1].pgd; - } - - /* - * After the lock is released, the original page table is restored. - */ + load_cr3(swapper_pg_dir); __flush_tlb_all(); local_irq_restore(efi_rt_eflags); -- cgit v1.2.3-70-g09d2 From 37d5993c5cc9bc83762ae1b5bd287438022e8afe Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 10 Dec 2011 20:38:32 +0800 Subject: ASoC: Fix WM8996 24.576MHz clock operation Record the clock after the divider as that is what all SYSCLK users see. Without this the other clock configuration in the device comes out at half rate. Signed-off-by: Mark Brown Cc: stable@kernel.org --- sound/soc/codecs/wm8996.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 645c980d6b80..a33b04d17195 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -1968,6 +1968,7 @@ static int wm8996_set_sysclk(struct snd_soc_dai *dai, break; case 24576000: ratediv = WM8996_SYSCLK_DIV; + wm8996->sysclk /= 2; case 12288000: snd_soc_update_bits(codec, WM8996_AIF_RATE, WM8996_SYSCLK_RATE, WM8996_SYSCLK_RATE); -- cgit v1.2.3-70-g09d2 From e58f516ff4730c4047c3f104b061f7a03e9a263c Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Fri, 11 Nov 2011 16:28:05 +0100 Subject: mmc: mxcmmc: fix falling back to PIO When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/mxcmmc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c index 325ea61e12d3..8e0fbe994047 100644 --- a/drivers/mmc/host/mxcmmc.c +++ b/drivers/mmc/host/mxcmmc.c @@ -732,6 +732,7 @@ static void mxcmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) "failed to config DMA channel. Falling back to PIO\n"); dma_release_channel(host->dma); host->do_dma = 0; + host->dma = NULL; } } -- cgit v1.2.3-70-g09d2 From 7833c66b2d764a3c883c2f5cc60cd8a6266dae15 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Fri, 11 Nov 2011 19:54:53 -0500 Subject: mmc: Add module.h include to sdhci-cns3xxx.c Fixes: drivers/mmc/host/sdhci-cns3xxx.c:110: error: 'THIS_MODULE' undeclared here (not in a function) Reported-by: Al Viro Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-cns3xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 4b920b7621cf..87b6f079b6e0 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include "sdhci-pltfm.h" -- cgit v1.2.3-70-g09d2 From 6de5fc9cf7de334912de4cfd2d06eb2d744d2afe Mon Sep 17 00:00:00 2001 From: Stefan Nilsson XK Date: Thu, 3 Nov 2011 09:44:12 +0100 Subject: mmc: core: Add quirk for long data read time Adds a quirk that sets the data read timeout to a fixed value instead of relying on the information in the CSD. The timeout value chosen is 300ms since that has proven enough for the problematic cards found, but could be increased if other cards require this. This patch also enables this quirk for certain Micron cards known to have this problem. Signed-off-by: Stefan Nilsson XK Signed-off-by: Ulf Hansson Acked-by: Linus Walleij Cc: Signed-off-by: Chris Ball --- drivers/mmc/card/block.c | 8 ++++++++ drivers/mmc/core/core.c | 12 ++++++++++++ include/linux/mmc/card.h | 6 ++++++ 3 files changed, 26 insertions(+) diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index a1cb21f95302..1e0e27cbe987 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -1606,6 +1606,14 @@ static const struct mmc_fixup blk_fixups[] = MMC_QUIRK_BLK_NO_CMD23), MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc, MMC_QUIRK_BLK_NO_CMD23), + + /* + * Some Micron MMC cards needs longer data read timeout than + * indicated in CSD. + */ + MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc, + MMC_QUIRK_LONG_READ_TIME), + END_FIXUP }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 5278ffb20e74..74a012ad2bab 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -529,6 +529,18 @@ void mmc_set_data_timeout(struct mmc_data *data, const struct mmc_card *card) data->timeout_clks = 0; } } + + /* + * Some cards require longer data read timeout than indicated in CSD. + * Address this by setting the read timeout to a "reasonably high" + * value. For the cards tested, 300ms has proven enough. If necessary, + * this value can be increased if other problematic cards require this. + */ + if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) { + data->timeout_ns = 300000000; + data->timeout_clks = 0; + } + /* * Some cards need very high timeouts if driven in SPI mode. * The worst observed timeout was 900ms after writing a diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 415f2db414e1..c8ef9bc54d50 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -218,6 +218,7 @@ struct mmc_card { #define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */ #define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */ #define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */ +#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */ /* byte mode */ unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */ #define MMC_NO_POWER_NOTIFICATION 0 @@ -433,6 +434,11 @@ static inline int mmc_card_broken_byte_mode_512(const struct mmc_card *c) return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512; } +static inline int mmc_card_long_read_time(const struct mmc_card *c) +{ + return c->quirks & MMC_QUIRK_LONG_READ_TIME; +} + #define mmc_card_name(c) ((c)->cid.prod_name) #define mmc_card_id(c) (dev_name(&(c)->dev)) -- cgit v1.2.3-70-g09d2 From 96a85d548bf960ec8e8a0c3bca2b2e88e41549db Mon Sep 17 00:00:00 2001 From: Girish K S Date: Fri, 4 Nov 2011 16:22:47 +0530 Subject: mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S Acked-by: Ulf Hansson Signed-off-by: Chris Ball --- drivers/mmc/core/mmc.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index dbf421a6279c..90de9ba36d2f 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -883,10 +883,14 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, card->ext_csd.generic_cmd6_time); if (err && err != -EBADMSG) goto free_card; - } - if (!err) - card->poweroff_notify_state = MMC_POWERED_ON; + /* + * The err can be -EBADMSG or 0, + * so check for success and update the flag + */ + if (!err) + card->poweroff_notify_state = MMC_POWERED_ON; + } /* * Activate high speed (if supported) -- cgit v1.2.3-70-g09d2 From a80f16276388a177199204aa5b60f328d4464110 Mon Sep 17 00:00:00 2001 From: Girish K S Date: Tue, 15 Nov 2011 11:55:46 +0530 Subject: mmc: core: Fix power_off_notify during suspend The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 81 ++++++++++++++++++++++++++++++------------------- drivers/mmc/core/mmc.c | 2 +- 2 files changed, 50 insertions(+), 33 deletions(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 74a012ad2bab..7ee2e07f36f4 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -1225,6 +1225,46 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type) mmc_host_clk_release(host); } +static void mmc_poweroff_notify(struct mmc_host *host) +{ + struct mmc_card *card; + unsigned int timeout; + unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION; + int err = 0; + + card = host->card; + + /* + * Send power notify command only if card + * is mmc and notify state is powered ON + */ + if (card && mmc_card_mmc(card) && + (card->poweroff_notify_state == MMC_POWERED_ON)) { + + if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { + notify_type = EXT_CSD_POWER_OFF_SHORT; + timeout = card->ext_csd.generic_cmd6_time; + card->poweroff_notify_state = MMC_POWEROFF_SHORT; + } else { + notify_type = EXT_CSD_POWER_OFF_LONG; + timeout = card->ext_csd.power_off_longtime; + card->poweroff_notify_state = MMC_POWEROFF_LONG; + } + + err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, + EXT_CSD_POWER_OFF_NOTIFICATION, + notify_type, timeout); + + if (err && err != -EBADMSG) + pr_err("Device failed to respond within %d poweroff " + "time. Forcefully powering down the device\n", + timeout); + + /* Set the card state to no notification after the poweroff */ + card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; + } +} + /* * Apply power to the MMC stack. This is a two-stage process. * First, we enable power to the card without the clock running. @@ -1281,42 +1321,12 @@ static void mmc_power_up(struct mmc_host *host) void mmc_power_off(struct mmc_host *host) { - struct mmc_card *card; - unsigned int notify_type; - unsigned int timeout; - int err; - mmc_host_clk_hold(host); - card = host->card; host->ios.clock = 0; host->ios.vdd = 0; - if (card && mmc_card_mmc(card) && - (card->poweroff_notify_state == MMC_POWERED_ON)) { - - if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) { - notify_type = EXT_CSD_POWER_OFF_SHORT; - timeout = card->ext_csd.generic_cmd6_time; - card->poweroff_notify_state = MMC_POWEROFF_SHORT; - } else { - notify_type = EXT_CSD_POWER_OFF_LONG; - timeout = card->ext_csd.power_off_longtime; - card->poweroff_notify_state = MMC_POWEROFF_LONG; - } - - err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, - EXT_CSD_POWER_OFF_NOTIFICATION, - notify_type, timeout); - - if (err && err != -EBADMSG) - pr_err("Device failed to respond within %d poweroff " - "time. Forcefully powering down the device\n", - timeout); - - /* Set the card state to no notification after the poweroff */ - card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION; - } + mmc_poweroff_notify(host); /* * Reset ocr mask to be the highest possible voltage supported for @@ -2314,8 +2324,15 @@ int mmc_suspend_host(struct mmc_host *host) * pre-claim the host. */ if (mmc_try_claim_host(host)) { - if (host->bus_ops->suspend) + if (host->bus_ops->suspend) { + /* + * For eMMC 4.5 device send notify command + * before sleep, because in sleep state eMMC 4.5 + * devices respond to only RESET and AWAKE cmd + */ + mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); + } if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 90de9ba36d2f..d240427c1246 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -876,7 +876,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, * set the notification byte in the ext_csd register of device */ if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) && - (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) { + (card->ext_csd.rev >= 6)) { err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_POWER_OFF_NOTIFICATION, EXT_CSD_POWER_ON, -- cgit v1.2.3-70-g09d2 From c99872a16fa7642987f30c750dc166674b0d8060 Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Thu, 17 Nov 2011 13:34:33 +0900 Subject: mmc: core: Fix typo at mmc_card_sleep Fix wrong bus_ops->sleep check. (This isn't expected to have real-world consequences, because the mmc core always defines both 'awake' and 'sleep' ops.) Signed-off-by: Kyungmin Park Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7ee2e07f36f4..271efeac860b 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2218,7 +2218,7 @@ int mmc_card_sleep(struct mmc_host *host) mmc_bus_get(host); - if (host->bus_ops && !host->bus_dead && host->bus_ops->awake) + if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep) err = host->bus_ops->sleep(host); mmc_bus_put(host); -- cgit v1.2.3-70-g09d2 From f6bc41fb08cbd6943df358437e0af90c91a3caa3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:10:41 +0100 Subject: mmc: sh_mmcif: fix clock gating on platforms with a .down_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the MMCIF interface functionality on ecovec boards. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/sh_mmcif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 369366c8e205..d5505f3fe2a1 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -908,7 +908,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->power) { pm_runtime_put(&host->pd->dev); host->power = false; - if (p->down_pwr) + if (p->down_pwr && ios->power_mode == MMC_POWER_OFF) p->down_pwr(host->pd); } host->state = STATE_IDLE; -- cgit v1.2.3-70-g09d2 From f6b8b52c68f6109db4be02b55660258ff503fc3b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 16 Nov 2011 10:11:45 +0100 Subject: mmc: tmio: fix clock gating on platforms with a .set_pwr() method Do not power down the card in .set_ios(), unless MMC_POWER_OFF is requested. This fixes the SDHI functionality on ecovec. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Chris Ball --- drivers/mmc/host/tmio_mmc_pio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index d85a60cda167..4208b3958069 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -798,7 +798,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) /* start bus clock */ tmio_mmc_clk_start(host); } else if (ios->power_mode != MMC_POWER_UP) { - if (host->set_pwr) + if (host->set_pwr && ios->power_mode == MMC_POWER_OFF) host->set_pwr(host->pdev, 0); if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) && pdata->power) { -- cgit v1.2.3-70-g09d2 From 524bfca2b42a7c9dc43af13e1592b21dd1ce3fcc Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 21 Nov 2011 18:00:51 +0000 Subject: mmc: sdhci-s3c: Remove old and misprototyped suspend operations Now that the driver is using dev_pm_ops the suspend operations in the platform_driver structure won't get called so don't need to be there, and certainly shouldn't be the same function as dev_pm_ops since the signatures are different. Signed-off-by: Mark Brown Acked-by: Jaehoon Chung Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-s3c.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index 3d00e722efc9..cb60c4197e0a 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -644,8 +644,6 @@ static int sdhci_s3c_resume(struct platform_device *dev) static struct platform_driver sdhci_s3c_driver = { .probe = sdhci_s3c_probe, .remove = __devexit_p(sdhci_s3c_remove), - .suspend = sdhci_s3c_suspend, - .resume = sdhci_s3c_resume, .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", -- cgit v1.2.3-70-g09d2 From 49df78074963c97e25debc3c67b72f059111607d Mon Sep 17 00:00:00 2001 From: Sujit Reddy Thumma Date: Wed, 23 Nov 2011 08:43:18 +0530 Subject: mmc: core: Fix deadlock when the CONFIG_MMC_UNSAFE_RESUME is not defined mmc_suspend_host() tries to claim host during suspend and release it only when the bus suspend operation is compeleted. If CONFIG_MMC_UNSAFE_RESUME is defined and the host is flagged as removable, mmc_suspend_host() tries to remove the card. In this process, the file system sync can get blocked trying to acquire host which is already claimed by mmc_suspend_host() causing deadlock. Fix this deadlock by releasing host before ->remove() is called. Signed-off-by: Sujit Reddy Thumma Acked-by: Ulf Hansson Acked-by: Linus Walleij Signed-off-by: Chris Ball --- drivers/mmc/core/core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 271efeac860b..950b97d7412a 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2333,6 +2333,8 @@ int mmc_suspend_host(struct mmc_host *host) mmc_poweroff_notify(host); err = host->bus_ops->suspend(host); } + mmc_do_release_host(host); + if (err == -ENOSYS || !host->bus_ops->resume) { /* * We simply "remove" the card in this case. @@ -2347,7 +2349,6 @@ int mmc_suspend_host(struct mmc_host *host) host->pm_flags = 0; err = 0; } - mmc_do_release_host(host); } else { err = -EBUSY; } -- cgit v1.2.3-70-g09d2 From 06c8eb9a9115dbbf1658a79f19f18a887c18119b Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Fri, 9 Dec 2011 14:38:11 +0100 Subject: ASoC: mxs: Add missing MODULE_LICENSE("GPL") MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The sound driver refuses to load as module, because of the missing MODULE_LICENSE("GPL"). The file header indicates that the driver is indeed published under the GPL. Signed-off-by: Lothar Waßmann Acked-by: Wolfram Sang Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-pcm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index dea5aa4aa647..8646913631de 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -357,3 +357,5 @@ static void __exit snd_mxs_pcm_exit(void) platform_driver_unregister(&mxs_pcm_driver); } module_exit(snd_mxs_pcm_exit); + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2 From 9fd369b193dceddd4e9e7f426c229c6104c80e28 Mon Sep 17 00:00:00 2001 From: Lothar Waßmann Date: Fri, 9 Dec 2011 14:38:12 +0100 Subject: ASoC: mxs: Add appropriate MODULE_ALIAS() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Lothar Waßmann Acked-by: Wolfram Sang Signed-off-by: Mark Brown --- sound/soc/mxs/mxs-pcm.c | 1 + sound/soc/mxs/mxs-sgtl5000.c | 1 + 2 files changed, 2 insertions(+) diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c index 8646913631de..f39d7dd9fbcb 100644 --- a/sound/soc/mxs/mxs-pcm.c +++ b/sound/soc/mxs/mxs-pcm.c @@ -359,3 +359,4 @@ static void __exit snd_mxs_pcm_exit(void) module_exit(snd_mxs_pcm_exit); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-pcm-audio"); diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 7fbeaec06eb4..1c57f6630a48 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -171,3 +171,4 @@ module_exit(mxs_sgtl5000_exit); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MXS ALSA SoC Machine driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mxs-sgtl5000"); -- cgit v1.2.3-70-g09d2 From 23bbba3411715736ad1942f3bdbb18e1bbe6d45f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 29 Nov 2011 18:21:41 -0300 Subject: [media] au0828: add missing USB ID 2040:7260 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-cards.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 39fc923fc46b..2e72bbd100af 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -324,6 +324,8 @@ struct usb_device_id au0828_usb_id_table[] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL }, { USB_DEVICE(0x2040, 0x8200), .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, + { USB_DEVICE(0x2040, 0x7260), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { }, }; -- cgit v1.2.3-70-g09d2 From 64a6b6cbfad64dae8230ff999394a4b1b9e82ceb Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 29 Nov 2011 18:23:11 -0300 Subject: [media] au0828: add missing USB ID 2040:7213 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-cards.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 2e72bbd100af..2dba8c1ea096 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -326,6 +326,8 @@ struct usb_device_id au0828_usb_id_table[] = { .driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY }, { USB_DEVICE(0x2040, 0x7260), .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7213), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { }, }; -- cgit v1.2.3-70-g09d2 From 6b536a6ca52ae12b5378de6fb5da305a3c54dbd8 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 29 Nov 2011 18:55:04 -0300 Subject: [media] au0828: add missing models 72101, 72201 & 72261 to the model matrix Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/au0828/au0828-cards.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index 2dba8c1ea096..1c6015a04f96 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -162,11 +162,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) switch (tv.model) { case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */ case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */ case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */ + case 72261: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */ case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; -- cgit v1.2.3-70-g09d2 From d1ee8878a142f81ea1b40d602c6360b752829437 Mon Sep 17 00:00:00 2001 From: Gary Thomas Date: Thu, 1 Dec 2011 08:51:09 -0300 Subject: [media] omap_vout: Fix compile error in 3.1 This patch is against the mainline v3.1 release (c3b92c8) and fixes a compile error when building for OMAP3+DSS+VOUT Acked-by: Laurent Pinchart Signed-off-by: Gary Thomas Cc: stable@kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap/omap_vout.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c index 2d2a136e465e..ee0d0b39cd17 100644 --- a/drivers/media/video/omap/omap_vout.c +++ b/drivers/media/video/omap/omap_vout.c @@ -38,6 +38,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From a626f3945208af1d60d3dccf064cac3b15bc54ca Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Mon, 5 Dec 2011 06:12:15 -0300 Subject: [media] s5p_mfc_enc: fix s/H264/H263/ typo Signed-off-by: Peter Korsgaard Aked-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-mfc/s5p_mfc_enc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c index 1e8cdb77d4b8..dff9dc798795 100644 --- a/drivers/media/video/s5p-mfc/s5p_mfc_enc.c +++ b/drivers/media/video/s5p-mfc/s5p_mfc_enc.c @@ -61,7 +61,7 @@ static struct s5p_mfc_fmt formats[] = { .num_planes = 1, }, { - .name = "H264 Encoded Stream", + .name = "H263 Encoded Stream", .fourcc = V4L2_PIX_FMT_H263, .codec_mode = S5P_FIMV_CODEC_H263_ENC, .type = MFC_FMT_ENC, -- cgit v1.2.3-70-g09d2 From 4c0b036db808054f10f79e9a3d7928cf90aeb186 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 5 Dec 2011 16:01:13 -0300 Subject: [media] V4L: soc-camera: fix compiler warnings on 64-bit platforms On 64-bit platforms assigning a pointer to a 32-bit variable causes a compiler warning and cannot actually work. Soc-camera currently doesn't support any 64-bit systems, but such platforms can be added in the and in any case compiler warnings should be avoided. Signed-off-by: Guennadi Liakhovetski Acked-by: Janusz Krzysztofik Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/ov6650.c | 2 +- drivers/media/video/sh_mobile_ceu_camera.c | 34 ++++++++++++++++++------------ drivers/media/video/sh_mobile_csi2.c | 4 ++-- drivers/media/video/soc_camera.c | 3 ++- include/media/soc_camera.h | 7 +++++- 5 files changed, 32 insertions(+), 18 deletions(-) diff --git a/drivers/media/video/ov6650.c b/drivers/media/video/ov6650.c index d5b057207a7b..577941fa3831 100644 --- a/drivers/media/video/ov6650.c +++ b/drivers/media/video/ov6650.c @@ -539,7 +539,7 @@ static u8 to_clkrc(struct v4l2_fract *timeperframe, static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *mf) { struct i2c_client *client = v4l2_get_subdevdata(sd); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); struct soc_camera_sense *sense = icd->sense; struct ov6650 *priv = to_ov6650(client); bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect); diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index f390682629cf..c51decfcae19 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -566,8 +566,10 @@ static int sh_mobile_ceu_add_device(struct soc_camera_device *icd) ret = sh_mobile_ceu_soft_reset(pcdev); csi2_sd = find_csi2(pcdev); - if (csi2_sd) - csi2_sd->grp_id = (long)icd; + if (csi2_sd) { + csi2_sd->grp_id = soc_camera_grp_id(icd); + v4l2_set_subdev_hostdata(csi2_sd, icd); + } ret = v4l2_subdev_call(csi2_sd, core, s_power, 1); if (ret < 0 && ret != -ENOIOCTLCMD && ret != -ENODEV) { @@ -768,7 +770,7 @@ static struct v4l2_subdev *find_bus_subdev(struct sh_mobile_ceu_dev *pcdev, { if (pcdev->csi2_pdev) { struct v4l2_subdev *csi2_sd = find_csi2(pcdev); - if (csi2_sd && csi2_sd->grp_id == (u32)icd) + if (csi2_sd && csi2_sd->grp_id == soc_camera_grp_id(icd)) return csi2_sd; } @@ -1089,8 +1091,9 @@ static int sh_mobile_ceu_get_formats(struct soc_camera_device *icd, unsigned int /* Try 2560x1920, 1280x960, 640x480, 320x240 */ mf.width = 2560 >> shift; mf.height = 1920 >> shift; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - s_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, &mf); if (ret < 0) return ret; shift++; @@ -1389,7 +1392,8 @@ static int client_s_fmt(struct soc_camera_device *icd, bool ceu_1to1; int ret; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, s_mbus_fmt, mf); if (ret < 0) return ret; @@ -1426,8 +1430,9 @@ static int client_s_fmt(struct soc_camera_device *icd, tmp_h = min(2 * tmp_h, max_height); mf->width = tmp_w; mf->height = tmp_h; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - s_mbus_fmt, mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, mf); dev_geo(dev, "Camera scaled to %ux%u\n", mf->width, mf->height); if (ret < 0) { @@ -1580,8 +1585,9 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, } if (interm_width < icd->user_width || interm_height < icd->user_height) { - ret = v4l2_device_call_until_err(sd->v4l2_dev, (int)icd, video, - s_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + s_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1867,7 +1873,8 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, mf.code = xlate->code; mf.colorspace = pix->colorspace; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, soc_camera_grp_id(icd), + video, try_mbus_fmt, &mf); if (ret < 0) return ret; @@ -1891,8 +1898,9 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, */ mf.width = 2560; mf.height = 1920; - ret = v4l2_device_call_until_err(sd->v4l2_dev, (long)icd, video, - try_mbus_fmt, &mf); + ret = v4l2_device_call_until_err(sd->v4l2_dev, + soc_camera_grp_id(icd), video, + try_mbus_fmt, &mf); if (ret < 0) { /* Shouldn't actually happen... */ dev_err(icd->parent, diff --git a/drivers/media/video/sh_mobile_csi2.c b/drivers/media/video/sh_mobile_csi2.c index 37706eb81f25..bd0ca0e04460 100644 --- a/drivers/media/video/sh_mobile_csi2.c +++ b/drivers/media/video/sh_mobile_csi2.c @@ -142,7 +142,7 @@ static int sh_csi2_s_mbus_config(struct v4l2_subdev *sd, const struct v4l2_mbus_config *cfg) { struct sh_csi2 *priv = container_of(sd, struct sh_csi2, subdev); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd); struct v4l2_mbus_config client_cfg = {.type = V4L2_MBUS_CSI2, .flags = priv->mipi_flags}; @@ -201,7 +201,7 @@ static void sh_csi2_hwinit(struct sh_csi2 *priv) static int sh_csi2_client_connect(struct sh_csi2 *priv) { struct sh_csi2_pdata *pdata = priv->pdev->dev.platform_data; - struct soc_camera_device *icd = (struct soc_camera_device *)priv->subdev.grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(&priv->subdev); struct v4l2_subdev *client_sd = soc_camera_to_subdev(icd); struct device *dev = v4l2_get_subdevdata(&priv->subdev); struct v4l2_mbus_config cfg; diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index b72580c38957..62e4312515cb 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -1103,7 +1103,8 @@ static int soc_camera_probe(struct soc_camera_device *icd) } sd = soc_camera_to_subdev(icd); - sd->grp_id = (long)icd; + sd->grp_id = soc_camera_grp_id(icd); + v4l2_set_subdev_hostdata(sd, icd); if (v4l2_ctrl_add_handler(&icd->ctrl_handler, sd->ctrl_handler)) goto ectrl; diff --git a/include/media/soc_camera.h b/include/media/soc_camera.h index b1377b931eb7..5fb2c3d10c05 100644 --- a/include/media/soc_camera.h +++ b/include/media/soc_camera.h @@ -254,7 +254,7 @@ unsigned long soc_camera_apply_board_flags(struct soc_camera_link *icl, static inline struct video_device *soc_camera_i2c_to_vdev(const struct i2c_client *client) { struct v4l2_subdev *sd = i2c_get_clientdata(client); - struct soc_camera_device *icd = (struct soc_camera_device *)sd->grp_id; + struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd); return icd ? icd->vdev : NULL; } @@ -279,6 +279,11 @@ static inline struct soc_camera_device *soc_camera_from_vbq(const struct videobu return container_of(vq, struct soc_camera_device, vb_vidq); } +static inline u32 soc_camera_grp_id(const struct soc_camera_device *icd) +{ + return (icd->iface << 8) | (icd->devnum + 1); +} + void soc_camera_lock(struct vb2_queue *vq); void soc_camera_unlock(struct vb2_queue *vq); -- cgit v1.2.3-70-g09d2 From 08da558ae0aaa488d8273ee44177c86580ba0d5a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 7 Nov 2011 15:44:12 -0300 Subject: [media] V4L: mt9t112: use after free in mt9t112_probe() priv gets dereferenced in mt9t112_set_params() so we should return before calling that. Signed-off-by: Dan Carpenter Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9t112.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/video/mt9t112.c b/drivers/media/video/mt9t112.c index 32114a3c0ca7..7b34b11daf24 100644 --- a/drivers/media/video/mt9t112.c +++ b/drivers/media/video/mt9t112.c @@ -1083,8 +1083,10 @@ static int mt9t112_probe(struct i2c_client *client, v4l2_i2c_subdev_init(&priv->subdev, client, &mt9t112_subdev_ops); ret = mt9t112_camera_probe(client); - if (ret) + if (ret) { kfree(priv); + return ret; + } /* Cannot fail: using the default supported pixel code */ mt9t112_set_params(priv, &rect, V4L2_MBUS_FMT_UYVY8_2X8); -- cgit v1.2.3-70-g09d2 From 9c0223b53a26c506ecc7a36ec491afa688eebee1 Mon Sep 17 00:00:00 2001 From: Janusz Krzysztofik Date: Thu, 24 Nov 2011 20:16:35 -0300 Subject: [media] V4L: omap1_camera: fix missing include Otherwise compilation breaks with: ... after apparently no longer included recursively from other header files. Signed-off-by: Janusz Krzysztofik Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/omap1_camera.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/omap1_camera.c b/drivers/media/video/omap1_camera.c index e87ae2f634b2..6a6cf388bae4 100644 --- a/drivers/media/video/omap1_camera.c +++ b/drivers/media/video/omap1_camera.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include -- cgit v1.2.3-70-g09d2 From 6b806e30a3149816454a7ab71d50c244ebdb27d1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 3 Nov 2011 08:12:00 -0300 Subject: [media] V4L: mt9m111: fix uninitialised mutex Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/mt9m111.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/mt9m111.c b/drivers/media/video/mt9m111.c index f023cc092c2b..dda4685166d5 100644 --- a/drivers/media/video/mt9m111.c +++ b/drivers/media/video/mt9m111.c @@ -954,6 +954,7 @@ static int mt9m111_probe(struct i2c_client *client, mt9m111->rect.height = MT9M111_MAX_HEIGHT; mt9m111->fmt = &mt9m111_colour_fmts[0]; mt9m111->lastpage = -1; + mutex_init(&mt9m111->power_lock); ret = mt9m111_video_probe(client); if (ret) { -- cgit v1.2.3-70-g09d2 From 5eefb4f09bd8b250421fbd055e67d136d57f4030 Mon Sep 17 00:00:00 2001 From: Anssi Hannula Date: Tue, 6 Dec 2011 22:34:29 -0300 Subject: [media] ati_remote: switch to single-byte scancodes The ati_remote driver currently uses 2-byte scancodes. However, one of those bytes is actually a checksum and therefore shouldn't be considered as part of the scancode. Fix the driver to only use the actual data byte as a scancode and to check the checksum itself. Update the bundled keymaps accordingly. Since ati_remote was only migrated to the rc subsystem for 3.2, the previous scancodes weren't emitted on any stable kernel. Reported-by: George Spelvin Signed-off-by: Anssi Hannula Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/ati_remote.c | 111 +++++++++----------- drivers/media/rc/keymaps/rc-ati-x10.c | 96 ++++++++--------- drivers/media/rc/keymaps/rc-medion-x10.c | 128 +++++++++++------------ drivers/media/rc/keymaps/rc-snapstream-firefly.c | 114 ++++++++++---------- 4 files changed, 220 insertions(+), 229 deletions(-) diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index 303f22ea04c0..01bb8daf4b09 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -189,7 +189,7 @@ struct ati_remote { dma_addr_t inbuf_dma; dma_addr_t outbuf_dma; - unsigned char old_data[2]; /* Detect duplicate events */ + unsigned char old_data; /* Detect duplicate events */ unsigned long old_jiffies; unsigned long acc_jiffies; /* handle acceleration */ unsigned long first_jiffies; @@ -221,35 +221,35 @@ struct ati_remote { /* Translation table from hardware messages to input events. */ static const struct { short kind; - unsigned char data1, data2; + unsigned char data; int type; unsigned int code; int value; } ati_remote_tbl[] = { /* Directional control pad axes */ - {KIND_ACCEL, 0x35, 0x70, EV_REL, REL_X, -1}, /* left */ - {KIND_ACCEL, 0x36, 0x71, EV_REL, REL_X, 1}, /* right */ - {KIND_ACCEL, 0x37, 0x72, EV_REL, REL_Y, -1}, /* up */ - {KIND_ACCEL, 0x38, 0x73, EV_REL, REL_Y, 1}, /* down */ + {KIND_ACCEL, 0x70, EV_REL, REL_X, -1}, /* left */ + {KIND_ACCEL, 0x71, EV_REL, REL_X, 1}, /* right */ + {KIND_ACCEL, 0x72, EV_REL, REL_Y, -1}, /* up */ + {KIND_ACCEL, 0x73, EV_REL, REL_Y, 1}, /* down */ /* Directional control pad diagonals */ - {KIND_LU, 0x39, 0x74, EV_REL, 0, 0}, /* left up */ - {KIND_RU, 0x3a, 0x75, EV_REL, 0, 0}, /* right up */ - {KIND_LD, 0x3c, 0x77, EV_REL, 0, 0}, /* left down */ - {KIND_RD, 0x3b, 0x76, EV_REL, 0, 0}, /* right down */ + {KIND_LU, 0x74, EV_REL, 0, 0}, /* left up */ + {KIND_RU, 0x75, EV_REL, 0, 0}, /* right up */ + {KIND_LD, 0x77, EV_REL, 0, 0}, /* left down */ + {KIND_RD, 0x76, EV_REL, 0, 0}, /* right down */ /* "Mouse button" buttons */ - {KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ - {KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ - {KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ - {KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ + {KIND_LITERAL, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */ + {KIND_LITERAL, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */ + {KIND_LITERAL, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */ + {KIND_LITERAL, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */ /* Artificial "doubleclick" events are generated by the hardware. * They are mapped to the "side" and "extra" mouse buttons here. */ - {KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ - {KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ + {KIND_FILTERED, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */ + {KIND_FILTERED, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */ /* Non-mouse events are handled by rc-core */ - {KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0} + {KIND_END, 0x00, EV_MAX + 1, 0, 0} }; /* Local function prototypes */ @@ -396,25 +396,6 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne return retval; } -/* - * ati_remote_event_lookup - */ -static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2) -{ - int i; - - for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { - /* - * Decide if the table entry matches the remote input. - */ - if (ati_remote_tbl[i].data1 == d1 && - ati_remote_tbl[i].data2 == d2) - return i; - - } - return -1; -} - /* * ati_remote_compute_accel * @@ -463,7 +444,15 @@ static void ati_remote_input_report(struct urb *urb) int index = -1; int acc; int remote_num; - unsigned char scancode[2]; + unsigned char scancode; + int i; + + /* + * data[0] = 0x14 + * data[1] = data[2] + data[3] + 0xd5 (a checksum byte) + * data[2] = the key code (with toggle bit in MSB with some models) + * data[3] = channel << 4 (the low 4 bits must be zero) + */ /* Deal with strange looking inputs */ if ( (urb->actual_length != 4) || (data[0] != 0x14) || @@ -472,6 +461,13 @@ static void ati_remote_input_report(struct urb *urb) return; } + if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) { + dbginfo(&ati_remote->interface->dev, + "wrong checksum in input: %02x %02x %02x %02x\n", + data[0], data[1], data[2], data[3]); + return; + } + /* Mask unwanted remote channels. */ /* note: remote_num is 0-based, channel 1 on remote == 0 here */ remote_num = (data[3] >> 4) & 0x0f; @@ -482,31 +478,30 @@ static void ati_remote_input_report(struct urb *urb) return; } - scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f)); - /* - * Some devices (e.g. SnapStream Firefly) use 8080 as toggle code, - * so we have to clear them. The first bit is a bit tricky as the - * "non-toggled" state depends on remote_num, so we xor it with the - * second bit which is only used for toggle. + * MSB is a toggle code, though only used by some devices + * (e.g. SnapStream Firefly) */ - scancode[0] ^= (data[2] & 0x80); - - scancode[1] = data[2] & ~0x80; + scancode = data[2] & 0x7f; - /* Look up event code index in mouse translation table. */ - index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]); + /* Look up event code index in the mouse translation table. */ + for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { + if (scancode == ati_remote_tbl[i].data) { + index = i; + break; + } + } if (index >= 0) { dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n", - remote_num, data[1], data[2], index, ati_remote_tbl[index].code); + "channel 0x%02x; mouse data %02x; index %d; keycode %d\n", + remote_num, data[2], index, ati_remote_tbl[index].code); if (!dev) return; /* no mouse device */ } else dbginfo(&ati_remote->interface->dev, - "channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n", - remote_num, data[1], data[2], scancode[0], scancode[1]); + "channel 0x%02x; key data %02x, scancode %02x\n", + remote_num, data[2], scancode); if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) { @@ -523,8 +518,7 @@ static void ati_remote_input_report(struct urb *urb) unsigned long now = jiffies; /* Filter duplicate events which happen "too close" together. */ - if (ati_remote->old_data[0] == data[1] && - ati_remote->old_data[1] == data[2] && + if (ati_remote->old_data == data[2] && time_before(now, ati_remote->old_jiffies + msecs_to_jiffies(repeat_filter))) { ati_remote->repeat_count++; @@ -533,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb) ati_remote->first_jiffies = now; } - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_data = data[2]; ati_remote->old_jiffies = now; /* Ensure we skip at least the 4 first duplicate events (generated @@ -549,14 +542,13 @@ static void ati_remote_input_report(struct urb *urb) if (index < 0) { /* Not a mouse event, hand it to rc-core. */ - u32 rc_code = (scancode[0] << 8) | scancode[1]; /* * We don't use the rc-core repeat handling yet as * it would cause ghost repeats which would be a * regression for this driver. */ - rc_keydown_notimeout(ati_remote->rdev, rc_code, + rc_keydown_notimeout(ati_remote->rdev, scancode, data[2]); rc_keyup(ati_remote->rdev); return; @@ -607,8 +599,7 @@ static void ati_remote_input_report(struct urb *urb) input_sync(dev); ati_remote->old_jiffies = jiffies; - ati_remote->old_data[0] = data[1]; - ati_remote->old_data[1] = data[2]; + ati_remote->old_data = data[2]; } } diff --git a/drivers/media/rc/keymaps/rc-ati-x10.c b/drivers/media/rc/keymaps/rc-ati-x10.c index e1b8b2605c48..81506440eded 100644 --- a/drivers/media/rc/keymaps/rc-ati-x10.c +++ b/drivers/media/rc/keymaps/rc-ati-x10.c @@ -27,55 +27,55 @@ #include static struct rc_map_table ati_x10[] = { - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xc500, KEY_A }, - { 0xc601, KEY_B }, - { 0xde19, KEY_C }, - { 0xe01b, KEY_D }, - { 0xe621, KEY_E }, - { 0xe823, KEY_F }, + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x00, KEY_A }, + { 0x01, KEY_B }, + { 0x19, KEY_C }, + { 0x1b, KEY_D }, + { 0x21, KEY_E }, + { 0x23, KEY_F }, - { 0xdd18, KEY_KPENTER }, /* "check" */ - { 0xdb16, KEY_MENU }, /* "menu" */ - { 0xc702, KEY_POWER }, /* Power */ - { 0xc803, KEY_TV }, /* TV */ - { 0xc904, KEY_DVD }, /* DVD */ - { 0xca05, KEY_WWW }, /* WEB */ - { 0xcb06, KEY_BOOKMARKS }, /* "book" */ - { 0xcc07, KEY_EDIT }, /* "hand" */ - { 0xe11c, KEY_COFFEE }, /* "timer" */ - { 0xe520, KEY_FRONT }, /* "max" */ - { 0xe21d, KEY_LEFT }, /* left */ - { 0xe41f, KEY_RIGHT }, /* right */ - { 0xe722, KEY_DOWN }, /* down */ - { 0xdf1a, KEY_UP }, /* up */ - { 0xe31e, KEY_OK }, /* "OK" */ - { 0xce09, KEY_VOLUMEDOWN }, /* VOL + */ - { 0xcd08, KEY_VOLUMEUP }, /* VOL - */ - { 0xcf0a, KEY_MUTE }, /* MUTE */ - { 0xd00b, KEY_CHANNELUP }, /* CH + */ - { 0xd10c, KEY_CHANNELDOWN },/* CH - */ - { 0xec27, KEY_RECORD }, /* ( o) red */ - { 0xea25, KEY_PLAY }, /* ( >) */ - { 0xe924, KEY_REWIND }, /* (<<) */ - { 0xeb26, KEY_FORWARD }, /* (>>) */ - { 0xed28, KEY_STOP }, /* ([]) */ - { 0xee29, KEY_PAUSE }, /* ('') */ - { 0xf02b, KEY_PREVIOUS }, /* (<-) */ - { 0xef2a, KEY_NEXT }, /* (>+) */ - { 0xf22d, KEY_INFO }, /* PLAYING */ - { 0xf32e, KEY_HOME }, /* TOP */ - { 0xf42f, KEY_END }, /* END */ - { 0xf530, KEY_SELECT }, /* SELECT */ + { 0x18, KEY_KPENTER }, /* "check" */ + { 0x16, KEY_MENU }, /* "menu" */ + { 0x02, KEY_POWER }, /* Power */ + { 0x03, KEY_TV }, /* TV */ + { 0x04, KEY_DVD }, /* DVD */ + { 0x05, KEY_WWW }, /* WEB */ + { 0x06, KEY_BOOKMARKS }, /* "book" */ + { 0x07, KEY_EDIT }, /* "hand" */ + { 0x1c, KEY_COFFEE }, /* "timer" */ + { 0x20, KEY_FRONT }, /* "max" */ + { 0x1d, KEY_LEFT }, /* left */ + { 0x1f, KEY_RIGHT }, /* right */ + { 0x22, KEY_DOWN }, /* down */ + { 0x1a, KEY_UP }, /* up */ + { 0x1e, KEY_OK }, /* "OK" */ + { 0x09, KEY_VOLUMEDOWN }, /* VOL + */ + { 0x08, KEY_VOLUMEUP }, /* VOL - */ + { 0x0a, KEY_MUTE }, /* MUTE */ + { 0x0b, KEY_CHANNELUP }, /* CH + */ + { 0x0c, KEY_CHANNELDOWN },/* CH - */ + { 0x27, KEY_RECORD }, /* ( o) red */ + { 0x25, KEY_PLAY }, /* ( >) */ + { 0x24, KEY_REWIND }, /* (<<) */ + { 0x26, KEY_FORWARD }, /* (>>) */ + { 0x28, KEY_STOP }, /* ([]) */ + { 0x29, KEY_PAUSE }, /* ('') */ + { 0x2b, KEY_PREVIOUS }, /* (<-) */ + { 0x2a, KEY_NEXT }, /* (>+) */ + { 0x2d, KEY_INFO }, /* PLAYING */ + { 0x2e, KEY_HOME }, /* TOP */ + { 0x2f, KEY_END }, /* END */ + { 0x30, KEY_SELECT }, /* SELECT */ }; static struct rc_map_list ati_x10_map = { diff --git a/drivers/media/rc/keymaps/rc-medion-x10.c b/drivers/media/rc/keymaps/rc-medion-x10.c index 09e2cc01d110..479cdb897810 100644 --- a/drivers/media/rc/keymaps/rc-medion-x10.c +++ b/drivers/media/rc/keymaps/rc-medion-x10.c @@ -25,70 +25,70 @@ #include static struct rc_map_table medion_x10[] = { - { 0xf12c, KEY_TV }, /* TV */ - { 0xf22d, KEY_VCR }, /* VCR */ - { 0xc904, KEY_DVD }, /* DVD */ - { 0xcb06, KEY_AUDIO }, /* MUSIC */ - - { 0xf32e, KEY_RADIO }, /* RADIO */ - { 0xca05, KEY_DIRECTORY }, /* PHOTO */ - { 0xf42f, KEY_INFO }, /* TV-PREVIEW */ - { 0xf530, KEY_LIST }, /* CHANNEL-LST */ - - { 0xe01b, KEY_SETUP }, /* SETUP */ - { 0xf631, KEY_VIDEO }, /* VIDEO DESKTOP */ - - { 0xcd08, KEY_VOLUMEDOWN }, /* VOL - */ - { 0xce09, KEY_VOLUMEUP }, /* VOL + */ - { 0xd00b, KEY_CHANNELUP }, /* CHAN + */ - { 0xd10c, KEY_CHANNELDOWN }, /* CHAN - */ - { 0xc500, KEY_MUTE }, /* MUTE */ - - { 0xf732, KEY_RED }, /* red */ - { 0xf833, KEY_GREEN }, /* green */ - { 0xf934, KEY_YELLOW }, /* yellow */ - { 0xfa35, KEY_BLUE }, /* blue */ - { 0xdb16, KEY_TEXT }, /* TXT */ - - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xe11c, KEY_SEARCH }, /* TV/RAD, CH SRC */ - { 0xe520, KEY_DELETE }, /* DELETE */ - - { 0xfb36, KEY_KEYBOARD }, /* RENAME */ - { 0xdd18, KEY_SCREEN }, /* SNAPSHOT */ - - { 0xdf1a, KEY_UP }, /* up */ - { 0xe722, KEY_DOWN }, /* down */ - { 0xe21d, KEY_LEFT }, /* left */ - { 0xe41f, KEY_RIGHT }, /* right */ - { 0xe31e, KEY_OK }, /* OK */ - - { 0xfc37, KEY_SELECT }, /* ACQUIRE IMAGE */ - { 0xfd38, KEY_EDIT }, /* EDIT IMAGE */ - - { 0xe924, KEY_REWIND }, /* rewind (<<) */ - { 0xea25, KEY_PLAY }, /* play ( >) */ - { 0xeb26, KEY_FORWARD }, /* forward (>>) */ - { 0xec27, KEY_RECORD }, /* record ( o) */ - { 0xed28, KEY_STOP }, /* stop ([]) */ - { 0xee29, KEY_PAUSE }, /* pause ('') */ - - { 0xe621, KEY_PREVIOUS }, /* prev */ - { 0xfe39, KEY_SWITCHVIDEOMODE }, /* F SCR */ - { 0xe823, KEY_NEXT }, /* next */ - { 0xde19, KEY_MENU }, /* MENU */ - { 0xff3a, KEY_LANGUAGE }, /* AUDIO */ - - { 0xc702, KEY_POWER }, /* POWER */ + { 0x2c, KEY_TV }, /* TV */ + { 0x2d, KEY_VCR }, /* VCR */ + { 0x04, KEY_DVD }, /* DVD */ + { 0x06, KEY_AUDIO }, /* MUSIC */ + + { 0x2e, KEY_RADIO }, /* RADIO */ + { 0x05, KEY_DIRECTORY }, /* PHOTO */ + { 0x2f, KEY_INFO }, /* TV-PREVIEW */ + { 0x30, KEY_LIST }, /* CHANNEL-LST */ + + { 0x1b, KEY_SETUP }, /* SETUP */ + { 0x31, KEY_VIDEO }, /* VIDEO DESKTOP */ + + { 0x08, KEY_VOLUMEDOWN }, /* VOL - */ + { 0x09, KEY_VOLUMEUP }, /* VOL + */ + { 0x0b, KEY_CHANNELUP }, /* CHAN + */ + { 0x0c, KEY_CHANNELDOWN }, /* CHAN - */ + { 0x00, KEY_MUTE }, /* MUTE */ + + { 0x32, KEY_RED }, /* red */ + { 0x33, KEY_GREEN }, /* green */ + { 0x34, KEY_YELLOW }, /* yellow */ + { 0x35, KEY_BLUE }, /* blue */ + { 0x16, KEY_TEXT }, /* TXT */ + + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x1c, KEY_SEARCH }, /* TV/RAD, CH SRC */ + { 0x20, KEY_DELETE }, /* DELETE */ + + { 0x36, KEY_KEYBOARD }, /* RENAME */ + { 0x18, KEY_SCREEN }, /* SNAPSHOT */ + + { 0x1a, KEY_UP }, /* up */ + { 0x22, KEY_DOWN }, /* down */ + { 0x1d, KEY_LEFT }, /* left */ + { 0x1f, KEY_RIGHT }, /* right */ + { 0x1e, KEY_OK }, /* OK */ + + { 0x37, KEY_SELECT }, /* ACQUIRE IMAGE */ + { 0x38, KEY_EDIT }, /* EDIT IMAGE */ + + { 0x24, KEY_REWIND }, /* rewind (<<) */ + { 0x25, KEY_PLAY }, /* play ( >) */ + { 0x26, KEY_FORWARD }, /* forward (>>) */ + { 0x27, KEY_RECORD }, /* record ( o) */ + { 0x28, KEY_STOP }, /* stop ([]) */ + { 0x29, KEY_PAUSE }, /* pause ('') */ + + { 0x21, KEY_PREVIOUS }, /* prev */ + { 0x39, KEY_SWITCHVIDEOMODE }, /* F SCR */ + { 0x23, KEY_NEXT }, /* next */ + { 0x19, KEY_MENU }, /* MENU */ + { 0x3a, KEY_LANGUAGE }, /* AUDIO */ + + { 0x02, KEY_POWER }, /* POWER */ }; static struct rc_map_list medion_x10_map = { diff --git a/drivers/media/rc/keymaps/rc-snapstream-firefly.c b/drivers/media/rc/keymaps/rc-snapstream-firefly.c index ef146520931c..c7f33ec719b4 100644 --- a/drivers/media/rc/keymaps/rc-snapstream-firefly.c +++ b/drivers/media/rc/keymaps/rc-snapstream-firefly.c @@ -22,63 +22,63 @@ #include static struct rc_map_table snapstream_firefly[] = { - { 0xf12c, KEY_ZOOM }, /* Maximize */ - { 0xc702, KEY_CLOSE }, - - { 0xd20d, KEY_1 }, - { 0xd30e, KEY_2 }, - { 0xd40f, KEY_3 }, - { 0xd510, KEY_4 }, - { 0xd611, KEY_5 }, - { 0xd712, KEY_6 }, - { 0xd813, KEY_7 }, - { 0xd914, KEY_8 }, - { 0xda15, KEY_9 }, - { 0xdc17, KEY_0 }, - { 0xdb16, KEY_BACK }, - { 0xdd18, KEY_KPENTER }, /* ent */ - - { 0xce09, KEY_VOLUMEUP }, - { 0xcd08, KEY_VOLUMEDOWN }, - { 0xcf0a, KEY_MUTE }, - { 0xd00b, KEY_CHANNELUP }, - { 0xd10c, KEY_CHANNELDOWN }, - { 0xc500, KEY_VENDOR }, /* firefly */ - - { 0xf32e, KEY_INFO }, - { 0xf42f, KEY_OPTION }, - - { 0xe21d, KEY_LEFT }, - { 0xe41f, KEY_RIGHT }, - { 0xe722, KEY_DOWN }, - { 0xdf1a, KEY_UP }, - { 0xe31e, KEY_OK }, - - { 0xe11c, KEY_MENU }, - { 0xe520, KEY_EXIT }, - - { 0xec27, KEY_RECORD }, - { 0xea25, KEY_PLAY }, - { 0xed28, KEY_STOP }, - { 0xe924, KEY_REWIND }, - { 0xeb26, KEY_FORWARD }, - { 0xee29, KEY_PAUSE }, - { 0xf02b, KEY_PREVIOUS }, - { 0xef2a, KEY_NEXT }, - - { 0xcb06, KEY_AUDIO }, /* Music */ - { 0xca05, KEY_IMAGES }, /* Photos */ - { 0xc904, KEY_DVD }, - { 0xc803, KEY_TV }, - { 0xcc07, KEY_VIDEO }, - - { 0xc601, KEY_HELP }, - { 0xf22d, KEY_MODE }, /* Mouse */ - - { 0xde19, KEY_A }, - { 0xe01b, KEY_B }, - { 0xe621, KEY_C }, - { 0xe823, KEY_D }, + { 0x2c, KEY_ZOOM }, /* Maximize */ + { 0x02, KEY_CLOSE }, + + { 0x0d, KEY_1 }, + { 0x0e, KEY_2 }, + { 0x0f, KEY_3 }, + { 0x10, KEY_4 }, + { 0x11, KEY_5 }, + { 0x12, KEY_6 }, + { 0x13, KEY_7 }, + { 0x14, KEY_8 }, + { 0x15, KEY_9 }, + { 0x17, KEY_0 }, + { 0x16, KEY_BACK }, + { 0x18, KEY_KPENTER }, /* ent */ + + { 0x09, KEY_VOLUMEUP }, + { 0x08, KEY_VOLUMEDOWN }, + { 0x0a, KEY_MUTE }, + { 0x0b, KEY_CHANNELUP }, + { 0x0c, KEY_CHANNELDOWN }, + { 0x00, KEY_VENDOR }, /* firefly */ + + { 0x2e, KEY_INFO }, + { 0x2f, KEY_OPTION }, + + { 0x1d, KEY_LEFT }, + { 0x1f, KEY_RIGHT }, + { 0x22, KEY_DOWN }, + { 0x1a, KEY_UP }, + { 0x1e, KEY_OK }, + + { 0x1c, KEY_MENU }, + { 0x20, KEY_EXIT }, + + { 0x27, KEY_RECORD }, + { 0x25, KEY_PLAY }, + { 0x28, KEY_STOP }, + { 0x24, KEY_REWIND }, + { 0x26, KEY_FORWARD }, + { 0x29, KEY_PAUSE }, + { 0x2b, KEY_PREVIOUS }, + { 0x2a, KEY_NEXT }, + + { 0x06, KEY_AUDIO }, /* Music */ + { 0x05, KEY_IMAGES }, /* Photos */ + { 0x04, KEY_DVD }, + { 0x03, KEY_TV }, + { 0x07, KEY_VIDEO }, + + { 0x01, KEY_HELP }, + { 0x2d, KEY_MODE }, /* Mouse */ + + { 0x19, KEY_A }, + { 0x1b, KEY_B }, + { 0x21, KEY_C }, + { 0x23, KEY_D }, }; static struct rc_map_list snapstream_firefly_map = { -- cgit v1.2.3-70-g09d2 From a32390d808b5b7a6b1c7f9236673c917b4733f13 Mon Sep 17 00:00:00 2001 From: Thomas Jarosch Date: Sat, 15 Oct 2011 18:38:40 -0300 Subject: [media] m5mols: Fix logic in sanity check Detected by "cppcheck". Signed-off-by: Thomas Jarosch Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/m5mols/m5mols_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/video/m5mols/m5mols_core.c b/drivers/media/video/m5mols/m5mols_core.c index 68497f8ddcd9..5da8d74df508 100644 --- a/drivers/media/video/m5mols/m5mols_core.c +++ b/drivers/media/video/m5mols/m5mols_core.c @@ -333,7 +333,7 @@ int m5mols_mode(struct m5mols_info *info, u8 mode) int ret = -EINVAL; u8 reg; - if (mode < REG_PARAMETER && mode > REG_CAPTURE) + if (mode < REG_PARAMETER || mode > REG_CAPTURE) return ret; ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, ®); -- cgit v1.2.3-70-g09d2 From 393a23fc9377ac3deaa97c5cc00b5c78746c8570 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 8 Dec 2011 06:56:22 -0300 Subject: [media] s5p-fimc: Fix camera input configuration in subdev operations When using only subdev user-space operations the camera interface input was not configured properly. Fix this by updating the corresponding data structure in set_fmt operation. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/s5p-fimc/fimc-capture.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/video/s5p-fimc/fimc-capture.c b/drivers/media/video/s5p-fimc/fimc-capture.c index 82d9ab6984eb..2cc3b9166724 100644 --- a/drivers/media/video/s5p-fimc/fimc-capture.c +++ b/drivers/media/video/s5p-fimc/fimc-capture.c @@ -1242,6 +1242,7 @@ static int fimc_subdev_set_fmt(struct v4l2_subdev *sd, mutex_lock(&fimc->lock); set_frame_bounds(ff, mf->width, mf->height); + fimc->vid_cap.mf = *mf; ff->fmt = ffmt; /* Reset the crop rectangle if required. */ -- cgit v1.2.3-70-g09d2 From 9811ccdfa94b4773c8030569bd8ec75eafa485ac Mon Sep 17 00:00:00 2001 From: Arnaud Patard Date: Sun, 11 Dec 2011 20:32:25 +0100 Subject: ARM: 7204/1: arch/arm/kernel/setup.c: initialize arm_dma_zone_size earlier arm_dma_zone_size is used by arm_bootmem_free() which is called by paging_init(). Thus it needs to be set before calling it. Signed-off-by: Arnaud Patard Acked-by: Nicolas Pitre Cc: stable@kernel.org Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 1bdd0adbb7dd..8fc2c8fcbdc6 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -902,6 +902,12 @@ void __init setup_arch(char **cmdline_p) machine_desc = mdesc; machine_name = mdesc->name; +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif if (mdesc->soft_reboot) reboot_setup("s"); @@ -932,12 +938,6 @@ void __init setup_arch(char **cmdline_p) tcm_init(); -#ifdef CONFIG_ZONE_DMA - if (mdesc->dma_zone_size) { - extern unsigned long arm_dma_zone_size; - arm_dma_zone_size = mdesc->dma_zone_size; - } -#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif -- cgit v1.2.3-70-g09d2 From 62e4a13e602214908341fad068ff91f31aed1a4e Mon Sep 17 00:00:00 2001 From: Jonathan Neuschäfer Date: Sun, 11 Dec 2011 19:15:49 +0100 Subject: ASoC: WM8958: correctly show firmware magic on mismatch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Jonathan Neuschäfer Signed-off-by: Mark Brown --- sound/soc/codecs/wm8958-dsp2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c index 0293763debe5..5a14d5c0e0e1 100644 --- a/sound/soc/codecs/wm8958-dsp2.c +++ b/sound/soc/codecs/wm8958-dsp2.c @@ -60,6 +60,8 @@ static int wm8958_dsp2_fw(struct snd_soc_codec *codec, const char *name, } if (memcmp(fw->data, "WMFW", 4) != 0) { + memcpy(&data32, fw->data, sizeof(data32)); + data32 = be32_to_cpu(data32); dev_err(codec->dev, "%s: firmware has bad file magic %08x\n", name, data32); goto err; -- cgit v1.2.3-70-g09d2 From 497d496598f411cb7f0690725a0e8b9029cebdb9 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 12 Dec 2011 11:26:00 +0800 Subject: ASoC: Fix hx4700 error handling to free gpios if snd_soc_register_card fails Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- sound/soc/pxa/hx4700.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c index 65c124831a00..c664e33fb6d7 100644 --- a/sound/soc/pxa/hx4700.c +++ b/sound/soc/pxa/hx4700.c @@ -209,9 +209,10 @@ static int __devinit hx4700_audio_probe(struct platform_device *pdev) snd_soc_card_hx4700.dev = &pdev->dev; ret = snd_soc_register_card(&snd_soc_card_hx4700); if (ret) - return ret; + gpio_free_array(hx4700_audio_gpios, + ARRAY_SIZE(hx4700_audio_gpios)); - return 0; + return ret; } static int __devexit hx4700_audio_remove(struct platform_device *pdev) -- cgit v1.2.3-70-g09d2 From 0d0e3064a88cc8d6bd3a9b43c5ae069ca838fc6e Mon Sep 17 00:00:00 2001 From: Chris Bagwell Date: Sun, 11 Dec 2011 23:50:59 -0800 Subject: Input: wacom - add product id used by Samsung Slate 7 New product ID reported by Harvey Braun on linuxwacom mailing list and also tested this patch with new hardware. Signed-off-by: Chris Bagwell Acked-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- drivers/input/tablet/wacom_wac.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index da0d8761e778..2ee47d01a3b4 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -1470,6 +1470,9 @@ static const struct wacom_features wacom_features_0xE3 = static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", WACOM_PKGLEN_TPC2FG, 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; +static const struct wacom_features wacom_features_0xEC = + { "Wacom ISDv4 EC", WACOM_PKGLEN_GRAPHIRE, 25710, 14500, 255, + 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", WACOM_PKGLEN_INTUOS, 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; @@ -1611,6 +1614,7 @@ const struct usb_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, { USB_DEVICE_WACOM(0xE6) }, + { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_LENOVO(0x6004) }, { } -- cgit v1.2.3-70-g09d2 From 3a7f8fb1d8c9b6a066b0452cea47c85547c97723 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Sun, 11 Dec 2011 23:40:56 -0800 Subject: Input: cma3000_d0x - fix signedness bug in cma3000_thread_irq() The error check (intr_status < 0) didn't work because intr_status is a u8. Change its type to signed int. Signed-off-by: Xi Wang Signed-off-by: Dmitry Torokhov --- drivers/input/misc/cma3000_d0x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c index 1633b6342267..09f8f2025580 100644 --- a/drivers/input/misc/cma3000_d0x.c +++ b/drivers/input/misc/cma3000_d0x.c @@ -114,8 +114,8 @@ static void decode_mg(struct cma3000_accl_data *data, int *datax, static irqreturn_t cma3000_thread_irq(int irq, void *dev_id) { struct cma3000_accl_data *data = dev_id; - int datax, datay, dataz; - u8 ctrl, mode, range, intr_status; + int datax, datay, dataz, intr_status; + u8 ctrl, mode, range; intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status"); if (intr_status < 0) -- cgit v1.2.3-70-g09d2 From 8521478f67e95ada4e87970c7b41e504c724b2cf Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Mon, 12 Dec 2011 00:05:53 -0800 Subject: Input: synaptics - fix touchpad not working after S2R on Vostro V13 Synaptics touchpads on several Dell laptops, particularly Vostro V13 systems, may not respond properly to PS/2 commands and queries immediately after resuming from suspend to RAM. This leads to unresponsive touchpad after suspend/resume cycle. Adding a 1-second delay after resetting the device allows touchpad to finish initializing (calibrating?) and start reacting properly. Reported-by: Daniel Manrique Tested-by: Daniel Manrique Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index c080b828e5dc..a6dcd18e9adf 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -24,6 +24,7 @@ */ #include +#include #include #include #include @@ -1220,6 +1221,16 @@ static int synaptics_reconnect(struct psmouse *psmouse) do { psmouse_reset(psmouse); + if (retry) { + /* + * On some boxes, right after resuming, the touchpad + * needs some time to finish initializing (I assume + * it needs time to calibrate) and start responding + * to Synaptics-specific queries, so let's wait a + * bit. + */ + ssleep(1); + } error = synaptics_detect(psmouse, 0); } while (error && ++retry < 3); -- cgit v1.2.3-70-g09d2 From f6a290b419a2675c4b77a6b0731cd2a64332365e Mon Sep 17 00:00:00 2001 From: Anton Blanchard Date: Mon, 7 Nov 2011 22:05:21 +1100 Subject: [SCSI] mpt2sas: _scsih_smart_predicted_fault uses GFP_KERNEL in interrupt context _scsih_smart_predicted_fault is called in an interrupt and therefore must allocate memory using GFP_ATOMIC. Signed-off-by: Anton Blanchard Cc: Signed-off-by: James Bottomley --- drivers/scsi/mpt2sas/mpt2sas_scsih.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index 4e041f6d808c..d570573b7963 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -4335,7 +4335,7 @@ _scsih_smart_predicted_fault(struct MPT2SAS_ADAPTER *ioc, u16 handle) /* insert into event log */ sz = offsetof(Mpi2EventNotificationReply_t, EventData) + sizeof(Mpi2EventDataSasDeviceStatusChange_t); - event_reply = kzalloc(sz, GFP_KERNEL); + event_reply = kzalloc(sz, GFP_ATOMIC); if (!event_reply) { printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__, __func__); -- cgit v1.2.3-70-g09d2 From ad537689c30d8e35300dcc93a109a966b8a89478 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Fri, 18 Nov 2011 09:02:09 -0800 Subject: [SCSI] qla2xxx: Remove qla2x00_wait_for_loop_ready function. This function can wait for 5min under certain scenarios. One of them is when the port is down from switch and bus reset is issued. The bus reset used to wait for 5 minutes for the loop and upper layer callers used to hang and give stack trace because of getting stuck for 120 sec. It is legacy code that was used when the driver used to do queuing of the commands. Signed-off-by: Saurav Kashyap Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 70 +++---------------------------------------- 1 file changed, 4 insertions(+), 66 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index fd14c7bfc626..93673d3094e8 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -814,49 +814,6 @@ qla2x00_wait_for_chip_reset(scsi_qla_host_t *vha) return return_status; } -/* - * qla2x00_wait_for_loop_ready - * Wait for MAX_LOOP_TIMEOUT(5 min) value for loop - * to be in LOOP_READY state. - * Input: - * ha - pointer to host adapter structure - * - * Note: - * Does context switching-Release SPIN_LOCK - * (if any) before calling this routine. - * - * - * Return: - * Success (LOOP_READY) : 0 - * Failed (LOOP_NOT_READY) : 1 - */ -static inline int -qla2x00_wait_for_loop_ready(scsi_qla_host_t *vha) -{ - int return_status = QLA_SUCCESS; - unsigned long loop_timeout ; - struct qla_hw_data *ha = vha->hw; - scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev); - - /* wait for 5 min at the max for loop to be ready */ - loop_timeout = jiffies + (MAX_LOOP_TIMEOUT * HZ); - - while ((!atomic_read(&base_vha->loop_down_timer) && - atomic_read(&base_vha->loop_state) == LOOP_DOWN) || - atomic_read(&base_vha->loop_state) != LOOP_READY) { - if (atomic_read(&base_vha->loop_state) == LOOP_DEAD) { - return_status = QLA_FUNCTION_FAILED; - break; - } - msleep(1000); - if (time_after_eq(jiffies, loop_timeout)) { - return_status = QLA_FUNCTION_FAILED; - break; - } - } - return (return_status); -} - static void sp_get(struct srb *sp) { @@ -1035,12 +992,6 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type, "Wait for hba online failed for cmd=%p.\n", cmd); goto eh_reset_failed; } - err = 1; - if (qla2x00_wait_for_loop_ready(vha) != QLA_SUCCESS) { - ql_log(ql_log_warn, vha, 0x800b, - "Wait for loop ready failed for cmd=%p.\n", cmd); - goto eh_reset_failed; - } err = 2; if (do_reset(fcport, cmd->device->lun, cmd->request->cpu + 1) != QLA_SUCCESS) { @@ -1137,10 +1088,9 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd) goto eh_bus_reset_done; } - if (qla2x00_wait_for_loop_ready(vha) == QLA_SUCCESS) { - if (qla2x00_loop_reset(vha) == QLA_SUCCESS) - ret = SUCCESS; - } + if (qla2x00_loop_reset(vha) == QLA_SUCCESS) + ret = SUCCESS; + if (ret == FAILED) goto eh_bus_reset_done; @@ -1206,15 +1156,6 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd) if (qla2x00_wait_for_reset_ready(vha) != QLA_SUCCESS) goto eh_host_reset_lock; - /* - * Fixme-may be dpc thread is active and processing - * loop_resync,so wait a while for it to - * be completed and then issue big hammer.Otherwise - * it may cause I/O failure as big hammer marks the - * devices as lost kicking of the port_down_timer - * while dpc is stuck for the mailbox to complete. - */ - qla2x00_wait_for_loop_ready(vha); if (vha != base_vha) { if (qla2x00_vp_abort_isp(vha)) goto eh_host_reset_lock; @@ -1297,16 +1238,13 @@ qla2x00_loop_reset(scsi_qla_host_t *vha) atomic_set(&vha->loop_state, LOOP_DOWN); atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME); qla2x00_mark_all_devices_lost(vha, 0); - qla2x00_wait_for_loop_ready(vha); } if (ha->flags.enable_lip_reset) { ret = qla2x00_lip_reset(vha); - if (ret != QLA_SUCCESS) { + if (ret != QLA_SUCCESS) ql_dbg(ql_dbg_taskm, vha, 0x802e, "lip_reset failed (%d).\n", ret); - } else - qla2x00_wait_for_loop_ready(vha); } /* Issue marker command only when we are going to start the I/O */ -- cgit v1.2.3-70-g09d2 From 4e85e3d92fd1b52989882062f5cb143a31375b62 Mon Sep 17 00:00:00 2001 From: Arun Easi Date: Fri, 18 Nov 2011 09:02:10 -0800 Subject: [SCSI] qla2xxx: Check for SCSI status on underruns. Signed-off-by: Arun Easi Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_isr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 2516adf1aeea..7b91b290ffd6 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1741,7 +1741,7 @@ qla2x00_status_entry(scsi_qla_host_t *vha, struct rsp_que *rsp, void *pkt) resid, scsi_bufflen(cp)); cp->result = DID_ERROR << 16 | lscsi_status; - break; + goto check_scsi_status; } if (!lscsi_status && -- cgit v1.2.3-70-g09d2 From be5ea3cfa15ddef0bee9dfbc214c2113119087a2 Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Fri, 18 Nov 2011 09:02:11 -0800 Subject: [SCSI] qla2xxx: Don't call alloc_fw_dump for ISP82XX. Signed-off-by: Saurav Kashyap Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_init.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index f03e915f1877..54ea68cec4c5 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -1509,7 +1509,8 @@ enable_82xx_npiv: &ha->fw_xcb_count, NULL, NULL, &ha->max_npiv_vports, NULL); - if (!fw_major_version && ql2xallocfwdump) + if (!fw_major_version && ql2xallocfwdump + && !IS_QLA82XX(ha)) qla2x00_alloc_fw_dump(vha); } } else { -- cgit v1.2.3-70-g09d2 From 0cd33fcfb54f2eb053ead3cca35ad9775fc01301 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:12 -0800 Subject: [SCSI] qla2xxx: Revert back the request queue mapping to request queue 0. If there is an error creating multiple response queues then we need to revert the request queue mapping back to request queue 0. Signed-off-by: Giridhar Malavali Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 93673d3094e8..01c87004b219 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -423,6 +423,7 @@ fail2: qla25xx_delete_queues(vha); destroy_workqueue(ha->wq); ha->wq = NULL; + vha->req = ha->req_q_map[0]; fail: ha->mqenable = 0; kfree(ha->req_q_map); -- cgit v1.2.3-70-g09d2 From 841c5e5cee140115b03355c39e4c3f1798ec34bc Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:13 -0800 Subject: [SCSI] qla2xxx: Stop unconditional completion of mailbox commands issued in interrupt mode during firmware hang. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 5 ++++- drivers/scsi/qla2xxx/qla_os.c | 5 ++++- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 94bded5ddce4..d2005c3c8247 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -4075,7 +4075,10 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) ha->flags.isp82xx_fw_hung = 1; if (ha->flags.mbox_busy) { ha->flags.mbox_int = 1; - complete(&ha->mbx_intr_comp); + if (test_bit(MBX_INTR_WAIT, + &ha->mbx_cmd_flags)) { + complete(&ha->mbx_intr_comp); + } } break; } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 01c87004b219..abec1dd31194 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4014,7 +4014,10 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) ql_dbg(ql_dbg_aer, vha, 0x9001, "Due to pci channel io frozen, doing premature " "completion of mbx command.\n"); - complete(&ha->mbx_intr_comp); + if (test_bit(MBX_INTR_WAIT, + &ha->mbx_cmd_flags)) { + complete(&ha->mbx_intr_comp); + } } } qla2x00_free_irqs(vha); -- cgit v1.2.3-70-g09d2 From 3aadff356bb80dae1ebb0a2e68974fdbb39fe034 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:14 -0800 Subject: [SCSI] qla2xxx: Enable Minidump by default with default capture mask 0x1f. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_os.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index abec1dd31194..71d62593c119 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -201,12 +201,12 @@ MODULE_PARM_DESC(ql2xmdcapmask, "Set the Minidump driver capture mask level. " "Default is 0x7F - Can be set to 0x3, 0x7, 0xF, 0x1F, 0x7F."); -int ql2xmdenable; +int ql2xmdenable = 1; module_param(ql2xmdenable, int, S_IRUGO); MODULE_PARM_DESC(ql2xmdenable, "Enable/disable MiniDump. " - "0 (Default) - MiniDump disabled. " - "1 - MiniDump enabled."); + "0 - MiniDump disabled. " + "1 (Default) - MiniDump enabled."); /* * SCSI host template entry points -- cgit v1.2.3-70-g09d2 From 1806fcd5d3d7644511e57b1d0a397837b0b38623 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Fri, 18 Nov 2011 09:02:15 -0800 Subject: [SCSI] qla2xxx: Return the correct value for a mailbox command if 82xx is in reset recovery. We need to return QLA_FUNCTION_TIMEOUT immediately otherwise we mess up the mailbox command state machine. Signed-off-by: Andrew Vasquez Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3b3cec9f6ac2..f965a57f5d65 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -79,8 +79,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) mcp->mb[0] = MBS_LINK_DOWN_ERROR; ql_log(ql_log_warn, base_vha, 0x1004, "FW hung = %d.\n", ha->flags.isp82xx_fw_hung); - rval = QLA_FUNCTION_FAILED; - goto premature_exit; + return QLA_FUNCTION_TIMEOUT; } /* -- cgit v1.2.3-70-g09d2 From 10a340e6415d938939724743a4da71fd63f5a95c Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Fri, 18 Nov 2011 09:02:16 -0800 Subject: [SCSI] qla2xxx: Display IPE error message for ISP82xx. [jejb: fixup checkpatch error] Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_nx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index d2005c3c8247..8dd96da78704 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3858,6 +3858,11 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) QLA82XX_CRB_PEG_NET_3 + 0x3c), qla82xx_rd_32(ha, QLA82XX_CRB_PEG_NET_4 + 0x3c)); + if (LSW(MSB(halt_status)) == 0x67) + ql_log(ql_log_warn, vha, 0xb052, + "Firmware aborted with " + "error code 0x00006700. Device is " + "being reset.\n"); if (halt_status & HALT_STATUS_UNRECOVERABLE) { set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags); -- cgit v1.2.3-70-g09d2 From c8f6544e6d831f05720687f3536d5cbc290ff181 Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Fri, 18 Nov 2011 09:02:17 -0800 Subject: [SCSI] qla2xxx: Encapsulate prematurely completing mailbox commands during ISP82xx firmware hang. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 6 +++--- drivers/scsi/qla2xxx/qla_gbl.h | 1 + drivers/scsi/qla2xxx/qla_nx.c | 33 ++++++++++++++++----------------- drivers/scsi/qla2xxx/qla_os.c | 12 ++---------- 4 files changed, 22 insertions(+), 30 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 9df4787715c0..e320d54d2e32 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -17,12 +17,12 @@ * | Queue Command and IO tracing | 0x302e | 0x3008 | * | DPC Thread | 0x401c | | * | Async Events | 0x5059 | | - * | Timer Routines | 0x600d | | + * | Timer Routines | 0x6010 | 0x600e,0x600f | * | User Space Interactions | 0x709d | | - * | Task Management | 0x8041 | | + * | Task Management | 0x8041 | 0x800b | * | AER/EEH | 0x900f | | * | Virtual Port | 0xa007 | | - * | ISP82XX Specific | 0xb051 | | + * | ISP82XX Specific | 0xb052 | | * | MultiQ | 0xc00b | | * | Misc | 0xd00b | | * ---------------------------------------------------------------------- diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ce32d8135c9e..c0c11afb685c 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -578,6 +578,7 @@ extern int qla82xx_check_md_needed(scsi_qla_host_t *); extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *); extern int qla82xx_mbx_beacon_ctl(scsi_qla_host_t *, int); extern char *qdev_state(uint32_t); +extern void qla82xx_clear_pending_mbx(scsi_qla_host_t *); /* BSG related functions */ extern int qla24xx_bsg_request(struct fc_bsg_job *); diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 8dd96da78704..60d999d335c5 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3817,6 +3817,19 @@ exit: return rval; } +void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha) +{ + struct qla_hw_data *ha = vha->hw; + + if (ha->flags.mbox_busy) { + ha->flags.mbox_int = 1; + ql_log(ql_log_warn, vha, 0x6010, + "Doing premature completion of mbx command.\n"); + if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags)) + complete(&ha->mbx_intr_comp); + } +} + void qla82xx_watchdog(scsi_qla_host_t *vha) { uint32_t dev_state, halt_status; @@ -3874,16 +3887,8 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) } qla2xxx_wake_dpc(vha); ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - ql_log(ql_log_warn, vha, 0x6007, - "Due to FW hung, doing " - "premature completion of mbx " - "command.\n"); - if (test_bit(MBX_INTR_WAIT, - &ha->mbx_cmd_flags)) - complete(&ha->mbx_intr_comp); - } + ql_log(ql_log_warn, vha, 0x6007, "Firmware hung.\n"); + qla82xx_clear_pending_mbx(vha); } } } @@ -4078,13 +4083,7 @@ qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha) msleep(1000); if (qla82xx_check_fw_alive(vha)) { ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - if (test_bit(MBX_INTR_WAIT, - &ha->mbx_cmd_flags)) { - complete(&ha->mbx_intr_comp); - } - } + qla82xx_clear_pending_mbx(vha); break; } } diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 71d62593c119..f9e5b85e84d8 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -4009,16 +4009,8 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) /* For ISP82XX complete any pending mailbox cmd */ if (IS_QLA82XX(ha)) { ha->flags.isp82xx_fw_hung = 1; - if (ha->flags.mbox_busy) { - ha->flags.mbox_int = 1; - ql_dbg(ql_dbg_aer, vha, 0x9001, - "Due to pci channel io frozen, doing premature " - "completion of mbx command.\n"); - if (test_bit(MBX_INTR_WAIT, - &ha->mbx_cmd_flags)) { - complete(&ha->mbx_intr_comp); - } - } + ql_dbg(ql_dbg_aer, vha, 0x9001, "Pci channel io frozen\n"); + qla82xx_clear_pending_mbx(vha); } qla2x00_free_irqs(vha); pci_disable_device(pdev); -- cgit v1.2.3-70-g09d2 From 1c89fe3b51a2f8068f2f9faa9c48584151416583 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Mon, 12 Dec 2011 14:01:17 +0800 Subject: ALSA: HDA: Set position fix to LPIB for an Atom/Poulsbo based device For the Asus 1101HA, reporting position by reading the DMA position buffer map seems unstable and often wrong. The reporter says that position_fix=LPIB works much better (although not 100%, but this is probably due to other issues). The controller chip is an Intel Poulsbo 8086:811b (rev 07) controller, and complete alsa-info is available here: https://launchpadlibrarian.net/86691768/alsa-info.txt.1TNwyE5Ea7 Cc: stable@kernel.org (3.0+) BugLink: http://bugs.launchpad.net/bugs/825709 Tested-by: Stefano Lodi Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 7d98240def0b..84d11d7ed710 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2507,6 +2507,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS 1101HA", POS_FIX_LPIB), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB), -- cgit v1.2.3-70-g09d2 From 8937f2f1c4bc6a9098fd71eb4a7deba5f0683118 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:18 -0800 Subject: [SCSI] qla2xxx: Clear mailbox busy flag during premature mailbox completion for ISP82xx. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_mbx.c | 2 ++ drivers/scsi/qla2xxx/qla_nx.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index f965a57f5d65..6ff7c3cbd0b5 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -162,6 +162,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) HINT_MBX_INT_PENDING) { spin_unlock_irqrestore(&ha->hardware_lock, flags); + ha->flags.mbox_busy = 0; ql_dbg(ql_dbg_mbx, base_vha, 0x1010, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; @@ -187,6 +188,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) HINT_MBX_INT_PENDING) { spin_unlock_irqrestore(&ha->hardware_lock, flags); + ha->flags.mbox_busy = 0; ql_dbg(ql_dbg_mbx, base_vha, 0x1012, "Pending mailbox timeout, exiting.\n"); rval = QLA_FUNCTION_TIMEOUT; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 60d999d335c5..54246f934664 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3823,6 +3823,7 @@ void qla82xx_clear_pending_mbx(scsi_qla_host_t *vha) if (ha->flags.mbox_busy) { ha->flags.mbox_int = 1; + ha->flags.mbox_busy = 0; ql_log(ql_log_warn, vha, 0x6010, "Doing premature completion of mbx command.\n"); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags)) -- cgit v1.2.3-70-g09d2 From 631549169801df054210839cfda0aceef78966af Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:19 -0800 Subject: [SCSI] qla2xxx: Disable generating pause frames when firmware hang detected for ISP82xx. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_dbg.c | 2 +- drivers/scsi/qla2xxx/qla_mbx.c | 20 ++++++++++++++++++-- drivers/scsi/qla2xxx/qla_nx.c | 6 +++++- drivers/scsi/qla2xxx/qla_nx.h | 4 ++++ 4 files changed, 28 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index e320d54d2e32..f3cddd5800c3 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -12,7 +12,7 @@ * | Level | Last Value Used | Holes | * ---------------------------------------------------------------------- * | Module Init and Probe | 0x0116 | | - * | Mailbox commands | 0x1129 | | + * | Mailbox commands | 0x112b | | * | Device Discovery | 0x2083 | | * | Queue Command and IO tracing | 0x302e | 0x3008 | * | DPC Thread | 0x401c | | diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 6ff7c3cbd0b5..82a33533ed26 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -303,7 +303,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) && !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - + if (IS_QLA82XX(ha)) { + ql_dbg(ql_dbg_mbx, vha, 0x112a, + "disabling pause transmit on port " + "0 & 1.\n"); + qla82xx_wr_32(ha, + QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0| + CRB_NIU_XG_PAUSE_CTL_P1); + } ql_log(ql_log_info, base_vha, 0x101c, "Mailbox cmd timeout occured. " "Scheduling ISP abort eeh_busy=0x%x.\n", @@ -319,7 +327,15 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) if (!test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) && !test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) && !test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) { - + if (IS_QLA82XX(ha)) { + ql_dbg(ql_dbg_mbx, vha, 0x112b, + "disabling pause transmit on port " + "0 & 1.\n"); + qla82xx_wr_32(ha, + QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0| + CRB_NIU_XG_PAUSE_CTL_P1); + } ql_log(ql_log_info, base_vha, 0x101e, "Mailbox cmd timeout occured. " "Scheduling ISP abort.\n"); diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 54246f934664..03554934b0a5 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -3853,9 +3853,13 @@ void qla82xx_watchdog(scsi_qla_host_t *vha) qla2xxx_wake_dpc(vha); } else { if (qla82xx_check_fw_alive(vha)) { + ql_dbg(ql_dbg_timer, vha, 0x6011, + "disabling pause transmit on port 0 & 1.\n"); + qla82xx_wr_32(ha, QLA82XX_CRB_NIU + 0x98, + CRB_NIU_XG_PAUSE_CTL_P0|CRB_NIU_XG_PAUSE_CTL_P1); halt_status = qla82xx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); - ql_dbg(ql_dbg_timer, vha, 0x6005, + ql_log(ql_log_info, vha, 0x6005, "dumping hw/fw registers:.\n " " PEG_HALT_STATUS1: 0x%x, PEG_HALT_STATUS2: 0x%x,.\n " " PEG_NET_0_PC: 0x%x, PEG_NET_1_PC: 0x%x,.\n " diff --git a/drivers/scsi/qla2xxx/qla_nx.h b/drivers/scsi/qla2xxx/qla_nx.h index 57820c199bc2..57a226be339a 100644 --- a/drivers/scsi/qla2xxx/qla_nx.h +++ b/drivers/scsi/qla2xxx/qla_nx.h @@ -1173,4 +1173,8 @@ struct qla82xx_md_entry_queue { static const int MD_MIU_TEST_AGT_RDDATA[] = { 0x410000A8, 0x410000AC, 0x410000B8, 0x410000BC }; + +#define CRB_NIU_XG_PAUSE_CTL_P0 0x1 +#define CRB_NIU_XG_PAUSE_CTL_P1 0x8 + #endif -- cgit v1.2.3-70-g09d2 From 49e85c23beb1f12aba59450126ff7e803fbc767d Mon Sep 17 00:00:00 2001 From: Saurav Kashyap Date: Fri, 18 Nov 2011 09:02:20 -0800 Subject: [SCSI] qla2xxx: Correct fc_host port_state display. [jejb: checkpatch fixes] Add more fine grain parsing of vha->loop_state to export a more accurate fc_host port_state. Signed-off-by: Saurav Kashyap Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_attr.c | 27 +++++++++++++++++++++++---- 1 file changed, 23 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index ac326c41e931..6465dae5883a 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1762,12 +1762,31 @@ qla2x00_get_host_port_state(struct Scsi_Host *shost) scsi_qla_host_t *vha = shost_priv(shost); struct scsi_qla_host *base_vha = pci_get_drvdata(vha->hw->pdev); - if (!base_vha->flags.online) + if (!base_vha->flags.online) { fc_host_port_state(shost) = FC_PORTSTATE_OFFLINE; - else if (atomic_read(&base_vha->loop_state) == LOOP_TIMEOUT) - fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; - else + return; + } + + switch (atomic_read(&base_vha->loop_state)) { + case LOOP_UPDATE: + fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS; + break; + case LOOP_DOWN: + if (test_bit(LOOP_RESYNC_NEEDED, &base_vha->dpc_flags)) + fc_host_port_state(shost) = FC_PORTSTATE_DIAGNOSTICS; + else + fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; + break; + case LOOP_DEAD: + fc_host_port_state(shost) = FC_PORTSTATE_LINKDOWN; + break; + case LOOP_READY: fc_host_port_state(shost) = FC_PORTSTATE_ONLINE; + break; + default: + fc_host_port_state(shost) = FC_PORTSTATE_UNKNOWN; + break; + } } static int -- cgit v1.2.3-70-g09d2 From 0d2aa38ee9b11be35ef6f91c938dd3441cf64ea4 Mon Sep 17 00:00:00 2001 From: Giridhar Malavali Date: Fri, 18 Nov 2011 09:02:21 -0800 Subject: [SCSI] qla2xxx: Submit all chained IOCBs for passthrough commands on request queue 0. Signed-off-by: Giridhar Malavali Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_iocb.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index dbec89622a0f..a4b267e60a35 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -120,11 +120,10 @@ qla2x00_prep_cont_type0_iocb(struct scsi_qla_host *vha) * Returns a pointer to the continuation type 1 IOCB packet. */ static inline cont_a64_entry_t * -qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha) +qla2x00_prep_cont_type1_iocb(scsi_qla_host_t *vha, struct req_que *req) { cont_a64_entry_t *cont_pkt; - struct req_que *req = vha->req; /* Adjust ring index. */ req->ring_index++; if (req->ring_index == req->length) { @@ -292,7 +291,7 @@ void qla2x00_build_scsi_iocbs_64(srb_t *sp, cmd_entry_t *cmd_pkt, * Five DSDs are available in the Continuation * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req); cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; avail_dsds = 5; } @@ -684,7 +683,7 @@ qla24xx_build_scsi_iocbs(srb_t *sp, struct cmd_type_7 *cmd_pkt, * Five DSDs are available in the Continuation * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, vha->req); cur_dsd = (uint32_t *)cont_pkt->dseg_0_address; avail_dsds = 5; } @@ -2070,7 +2069,8 @@ qla2x00_ct_iocb(srb_t *sp, ms_iocb_entry_t *ct_iocb) * Five DSDs are available in the Cont. * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, + vha->hw->req_q_map[0]); cur_dsd = (uint32_t *) cont_pkt->dseg_0_address; avail_dsds = 5; cont_iocb_prsnt = 1; @@ -2096,6 +2096,7 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) int index; uint16_t tot_dsds; scsi_qla_host_t *vha = sp->fcport->vha; + struct qla_hw_data *ha = vha->hw; struct fc_bsg_job *bsg_job = ((struct srb_ctx *)sp->ctx)->u.bsg_job; int loop_iterartion = 0; int cont_iocb_prsnt = 0; @@ -2141,7 +2142,8 @@ qla24xx_ct_iocb(srb_t *sp, struct ct_entry_24xx *ct_iocb) * Five DSDs are available in the Cont. * Type 1 IOCB. */ - cont_pkt = qla2x00_prep_cont_type1_iocb(vha); + cont_pkt = qla2x00_prep_cont_type1_iocb(vha, + ha->req_q_map[0]); cur_dsd = (uint32_t *) cont_pkt->dseg_0_address; avail_dsds = 5; cont_iocb_prsnt = 1; -- cgit v1.2.3-70-g09d2 From 09b4402d2c8e36b8d4270c4da235fd7bb312118d Mon Sep 17 00:00:00 2001 From: Chad Dupuis Date: Fri, 18 Nov 2011 09:02:22 -0800 Subject: [SCSI] qla2xxx: Update version number to 8.03.07.12-k. Signed-off-by: Chad Dupuis Signed-off-by: James Bottomley --- drivers/scsi/qla2xxx/qla_version.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 13b6357c1fa2..23f33a6d52d7 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.07-k" +#define QLA2XXX_VERSION "8.03.07.12-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 -- cgit v1.2.3-70-g09d2 From f44b915d315ff0a7dd362c5c0eac5fbde4cc4411 Mon Sep 17 00:00:00 2001 From: Yu Xu Date: Sat, 10 Dec 2011 00:03:33 +0800 Subject: usb: gadget: storage: release superspeed descriptors. Release superspeed mass storage descriptors memory when the function is unbind. Signed-off-by: Yu Xu Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index c39d58860fa0..1a6f415c0d02 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2975,6 +2975,7 @@ static void fsg_unbind(struct usb_configuration *c, struct usb_function *f) fsg_common_put(common); usb_free_descriptors(fsg->function.descriptors); usb_free_descriptors(fsg->function.hs_descriptors); + usb_free_descriptors(fsg->function.ss_descriptors); kfree(fsg); } -- cgit v1.2.3-70-g09d2 From b95eb7476e7224baae34f67ae9a09042521e97ff Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Dec 2011 18:23:56 -0800 Subject: usb: renesas_usbhs: typofix: irq_dtch control DTCHE Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c index 053f86d70009..ad96a3896729 100644 --- a/drivers/usb/renesas_usbhs/mod.c +++ b/drivers/usb/renesas_usbhs/mod.c @@ -349,7 +349,7 @@ void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod) if (mod->irq_attch) intenb1 |= ATTCHE; - if (mod->irq_attch) + if (mod->irq_dtch) intenb1 |= DTCHE; if (mod->irq_sign) -- cgit v1.2.3-70-g09d2 From 1115b9e279a23ca0bf7eda7d7697fe20a441304e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 8 Dec 2011 18:24:47 -0800 Subject: usb: renesas_usbhs: add hcd->has_tt for low/full speed Low/Full speed device is not recognized without this patch Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c index bade761a1e52..7955de589951 100644 --- a/drivers/usb/renesas_usbhs/mod_host.c +++ b/drivers/usb/renesas_usbhs/mod_host.c @@ -1267,6 +1267,7 @@ int usbhs_mod_host_probe(struct usbhs_priv *priv) dev_err(dev, "Failed to create hcd\n"); return -ENOMEM; } + hcd->has_tt = 1; /* for low/full speed */ pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL); if (!pipe_info) { -- cgit v1.2.3-70-g09d2 From b302545744c031eae04a43fb1c56cc17e00a193a Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 12 Dec 2011 12:42:12 +0100 Subject: block/swim3: Locking fixes The old PowerMac swim3 driver has some "interesting" locking issues, using a private lock and failing to lock the queue before completing requests, which triggered WARN_ONs among others. This rips out the private lock, makes everything operate under the block queue lock, and generally makes things simpler. We used to also share a queue between the two possible instances which was problematic since we might pick the wrong controller in some cases, so make the queue and the current request per-instance and use queuedata to point to our private data which is a lot cleaner. We still share the queue lock but then, it's nearly impossible to actually use 2 swim3's simultaneously: one would need to have a Wallstreet PowerBook, the only machine afaik with two of these on the motherboard, and populate both hotswap bays with a floppy drive (the machine ships only with one), so nobody cares... While at it, add a little fix to clear up stale interrupts when loading the driver or plugging a floppy drive in a bay. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jens Axboe --- drivers/block/swim3.c | 362 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 215 insertions(+), 147 deletions(-) diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c index ae3e167e17ad..89ddab127e33 100644 --- a/drivers/block/swim3.c +++ b/drivers/block/swim3.c @@ -16,6 +16,8 @@ * handle GCR disks */ +#undef DEBUG + #include #include #include @@ -36,13 +38,11 @@ #include #include -static DEFINE_MUTEX(swim3_mutex); -static struct request_queue *swim3_queue; -static struct gendisk *disks[2]; -static struct request *fd_req; - #define MAX_FLOPPIES 2 +static DEFINE_MUTEX(swim3_mutex); +static struct gendisk *disks[MAX_FLOPPIES]; + enum swim_state { idle, locating, @@ -177,7 +177,6 @@ struct swim3 { struct floppy_state { enum swim_state state; - spinlock_t lock; struct swim3 __iomem *swim3; /* hardware registers */ struct dbdma_regs __iomem *dma; /* DMA controller registers */ int swim3_intr; /* interrupt number for SWIM3 */ @@ -204,8 +203,20 @@ struct floppy_state { int wanted; struct macio_dev *mdev; char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)]; + int index; + struct request *cur_req; }; +#define swim3_err(fmt, arg...) dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#define swim3_warn(fmt, arg...) dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#define swim3_info(fmt, arg...) dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) + +#ifdef DEBUG +#define swim3_dbg(fmt, arg...) dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg) +#else +#define swim3_dbg(fmt, arg...) do { } while(0) +#endif + static struct floppy_state floppy_states[MAX_FLOPPIES]; static int floppy_count = 0; static DEFINE_SPINLOCK(swim3_lock); @@ -224,17 +235,8 @@ static unsigned short write_postamble[] = { 0, 0, 0, 0, 0, 0 }; -static void swim3_select(struct floppy_state *fs, int sel); -static void swim3_action(struct floppy_state *fs, int action); -static int swim3_readbit(struct floppy_state *fs, int bit); -static void do_fd_request(struct request_queue * q); -static void start_request(struct floppy_state *fs); -static void set_timeout(struct floppy_state *fs, int nticks, - void (*proc)(unsigned long)); -static void scan_track(struct floppy_state *fs); static void seek_track(struct floppy_state *fs, int n); static void init_dma(struct dbdma_cmd *cp, int cmd, void *buf, int count); -static void setup_transfer(struct floppy_state *fs); static void act(struct floppy_state *fs); static void scan_timeout(unsigned long data); static void seek_timeout(unsigned long data); @@ -254,18 +256,21 @@ static unsigned int floppy_check_events(struct gendisk *disk, unsigned int clearing); static int floppy_revalidate(struct gendisk *disk); -static bool swim3_end_request(int err, unsigned int nr_bytes) +static bool swim3_end_request(struct floppy_state *fs, int err, unsigned int nr_bytes) { - if (__blk_end_request(fd_req, err, nr_bytes)) - return true; + struct request *req = fs->cur_req; + int rc; - fd_req = NULL; - return false; -} + swim3_dbg(" end request, err=%d nr_bytes=%d, cur_req=%p\n", + err, nr_bytes, req); -static bool swim3_end_request_cur(int err) -{ - return swim3_end_request(err, blk_rq_cur_bytes(fd_req)); + if (err) + nr_bytes = blk_rq_cur_bytes(req); + rc = __blk_end_request(req, err, nr_bytes); + if (rc) + return true; + fs->cur_req = NULL; + return false; } static void swim3_select(struct floppy_state *fs, int sel) @@ -303,50 +308,53 @@ static int swim3_readbit(struct floppy_state *fs, int bit) return (stat & DATA) == 0; } -static void do_fd_request(struct request_queue * q) -{ - int i; - - for(i=0; imdev->media_bay && - check_media_bay(fs->mdev->media_bay) != MB_FD) - continue; - start_request(fs); - } -} - static void start_request(struct floppy_state *fs) { struct request *req; unsigned long x; + swim3_dbg("start request, initial state=%d\n", fs->state); + if (fs->state == idle && fs->wanted) { fs->state = available; wake_up(&fs->wait); return; } while (fs->state == idle) { - if (!fd_req) { - fd_req = blk_fetch_request(swim3_queue); - if (!fd_req) + swim3_dbg("start request, idle loop, cur_req=%p\n", fs->cur_req); + if (!fs->cur_req) { + fs->cur_req = blk_fetch_request(disks[fs->index]->queue); + swim3_dbg(" fetched request %p\n", fs->cur_req); + if (!fs->cur_req) break; } - req = fd_req; -#if 0 - printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", - req->rq_disk->disk_name, req->cmd, - (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer); - printk(" errors=%d current_nr_sectors=%u\n", - req->errors, blk_rq_cur_sectors(req)); + req = fs->cur_req; + + if (fs->mdev->media_bay && + check_media_bay(fs->mdev->media_bay) != MB_FD) { + swim3_dbg("%s", " media bay absent, dropping req\n"); + swim3_end_request(fs, -ENODEV, 0); + continue; + } + +#if 0 /* This is really too verbose */ + swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n", + req->rq_disk->disk_name, req->cmd, + (long)blk_rq_pos(req), blk_rq_sectors(req), + req->buffer); + swim3_dbg(" errors=%d current_nr_sectors=%u\n", + req->errors, blk_rq_cur_sectors(req)); #endif if (blk_rq_pos(req) >= fs->total_secs) { - swim3_end_request_cur(-EIO); + swim3_dbg(" pos out of bounds (%ld, max is %ld)\n", + (long)blk_rq_pos(req), (long)fs->total_secs); + swim3_end_request(fs, -EIO, 0); continue; } if (fs->ejected) { - swim3_end_request_cur(-EIO); + swim3_dbg("%s", " disk ejected\n"); + swim3_end_request(fs, -EIO, 0); continue; } @@ -354,7 +362,8 @@ static void start_request(struct floppy_state *fs) if (fs->write_prot < 0) fs->write_prot = swim3_readbit(fs, WRITE_PROT); if (fs->write_prot) { - swim3_end_request_cur(-EIO); + swim3_dbg("%s", " try to write, disk write protected\n"); + swim3_end_request(fs, -EIO, 0); continue; } } @@ -369,7 +378,6 @@ static void start_request(struct floppy_state *fs) x = ((long)blk_rq_pos(req)) % fs->secpercyl; fs->head = x / fs->secpertrack; fs->req_sector = x % fs->secpertrack + 1; - fd_req = req; fs->state = do_transfer; fs->retries = 0; @@ -377,12 +385,14 @@ static void start_request(struct floppy_state *fs) } } +static void do_fd_request(struct request_queue * q) +{ + start_request(q->queuedata); +} + static void set_timeout(struct floppy_state *fs, int nticks, void (*proc)(unsigned long)) { - unsigned long flags; - - spin_lock_irqsave(&fs->lock, flags); if (fs->timeout_pending) del_timer(&fs->timeout); fs->timeout.expires = jiffies + nticks; @@ -390,7 +400,6 @@ static void set_timeout(struct floppy_state *fs, int nticks, fs->timeout.data = (unsigned long) fs; add_timer(&fs->timeout); fs->timeout_pending = 1; - spin_unlock_irqrestore(&fs->lock, flags); } static inline void scan_track(struct floppy_state *fs) @@ -442,40 +451,45 @@ static inline void setup_transfer(struct floppy_state *fs) struct swim3 __iomem *sw = fs->swim3; struct dbdma_cmd *cp = fs->dma_cmd; struct dbdma_regs __iomem *dr = fs->dma; + struct request *req = fs->cur_req; - if (blk_rq_cur_sectors(fd_req) <= 0) { - printk(KERN_ERR "swim3: transfer 0 sectors?\n"); + if (blk_rq_cur_sectors(req) <= 0) { + swim3_warn("%s", "Transfer 0 sectors ?\n"); return; } - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) n = 1; else { n = fs->secpertrack - fs->req_sector + 1; - if (n > blk_rq_cur_sectors(fd_req)) - n = blk_rq_cur_sectors(fd_req); + if (n > blk_rq_cur_sectors(req)) + n = blk_rq_cur_sectors(req); } + + swim3_dbg(" setup xfer at sect %d (of %d) head %d for %d\n", + fs->req_sector, fs->secpertrack, fs->head, n); + fs->scount = n; swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0); out_8(&sw->sector, fs->req_sector); out_8(&sw->nsect, n); out_8(&sw->gap3, 0); out_le32(&dr->cmdptr, virt_to_bus(cp)); - if (rq_data_dir(fd_req) == WRITE) { + if (rq_data_dir(req) == WRITE) { /* Set up 3 dma commands: write preamble, data, postamble */ init_dma(cp, OUTPUT_MORE, write_preamble, sizeof(write_preamble)); ++cp; - init_dma(cp, OUTPUT_MORE, fd_req->buffer, 512); + init_dma(cp, OUTPUT_MORE, req->buffer, 512); ++cp; init_dma(cp, OUTPUT_LAST, write_postamble, sizeof(write_postamble)); } else { - init_dma(cp, INPUT_LAST, fd_req->buffer, n * 512); + init_dma(cp, INPUT_LAST, req->buffer, n * 512); } ++cp; out_le16(&cp->command, DBDMA_STOP); out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); in_8(&sw->error); out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) out_8(&sw->control_bis, WRITE_SECTORS); in_8(&sw->intr); out_le32(&dr->control, (RUN << 16) | RUN); @@ -488,12 +502,16 @@ static inline void setup_transfer(struct floppy_state *fs) static void act(struct floppy_state *fs) { for (;;) { + swim3_dbg(" act loop, state=%d, req_cyl=%d, cur_cyl=%d\n", + fs->state, fs->req_cyl, fs->cur_cyl); + switch (fs->state) { case idle: return; /* XXX shouldn't get here */ case locating: if (swim3_readbit(fs, TRACK_ZERO)) { + swim3_dbg("%s", " locate track 0\n"); fs->cur_cyl = 0; if (fs->req_cyl == 0) fs->state = do_transfer; @@ -511,7 +529,7 @@ static void act(struct floppy_state *fs) break; } if (fs->req_cyl == fs->cur_cyl) { - printk("whoops, seeking 0\n"); + swim3_warn("%s", "Whoops, seeking 0\n"); fs->state = do_transfer; break; } @@ -527,7 +545,9 @@ static void act(struct floppy_state *fs) case do_transfer: if (fs->cur_cyl != fs->req_cyl) { if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_err("Wrong cylinder in transfer, want: %d got %d\n", + fs->req_cyl, fs->cur_cyl); + swim3_end_request(fs, -EIO, 0); fs->state = idle; return; } @@ -542,7 +562,7 @@ static void act(struct floppy_state *fs) return; default: - printk(KERN_ERR"swim3: unknown state %d\n", fs->state); + swim3_err("Unknown state %d\n", fs->state); return; } } @@ -552,59 +572,75 @@ static void scan_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* scan timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS); out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); fs->cur_cyl = -1; if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); } else { fs->state = jogging; act(fs); } + spin_unlock_irqrestore(&swim3_lock, flags); } static void seek_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* seek timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_8(&sw->control_bic, DO_SEEK); out_8(&sw->select, RELAX); out_8(&sw->intr_enable, 0); - printk(KERN_ERR "swim3: seek timeout\n"); - swim3_end_request_cur(-EIO); + swim3_err("%s", "Seek timeout\n"); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + spin_unlock_irqrestore(&swim3_lock, flags); } static void settle_timeout(unsigned long data) { struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; + unsigned long flags; + + swim3_dbg("* settle timeout, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; if (swim3_readbit(fs, SEEK_COMPLETE)) { out_8(&sw->select, RELAX); fs->state = locating; act(fs); - return; + goto unlock; } out_8(&sw->select, RELAX); if (fs->settle_time < 2*HZ) { ++fs->settle_time; set_timeout(fs, 1, settle_timeout); - return; + goto unlock; } - printk(KERN_ERR "swim3: seek settle timeout\n"); - swim3_end_request_cur(-EIO); + swim3_err("%s", "Seek settle timeout\n"); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + unlock: + spin_unlock_irqrestore(&swim3_lock, flags); } static void xfer_timeout(unsigned long data) @@ -612,8 +648,12 @@ static void xfer_timeout(unsigned long data) struct floppy_state *fs = (struct floppy_state *) data; struct swim3 __iomem *sw = fs->swim3; struct dbdma_regs __iomem *dr = fs->dma; + unsigned long flags; int n; + swim3_dbg("* xfer timeout, state=%d\n", fs->state); + + spin_lock_irqsave(&swim3_lock, flags); fs->timeout_pending = 0; out_le32(&dr->control, RUN << 16); /* We must wait a bit for dbdma to stop */ @@ -622,12 +662,13 @@ static void xfer_timeout(unsigned long data) out_8(&sw->intr_enable, 0); out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION); out_8(&sw->select, RELAX); - printk(KERN_ERR "swim3: timeout %sing sector %ld\n", - (rq_data_dir(fd_req)==WRITE? "writ": "read"), - (long)blk_rq_pos(fd_req)); - swim3_end_request_cur(-EIO); + swim3_err("Timeout %sing sector %ld\n", + (rq_data_dir(fs->cur_req)==WRITE? "writ": "read"), + (long)blk_rq_pos(fs->cur_req)); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); + spin_unlock_irqrestore(&swim3_lock, flags); } static irqreturn_t swim3_interrupt(int irq, void *dev_id) @@ -638,12 +679,17 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) int stat, resid; struct dbdma_regs __iomem *dr; struct dbdma_cmd *cp; + unsigned long flags; + struct request *req = fs->cur_req; + + swim3_dbg("* interrupt, state=%d\n", fs->state); + spin_lock_irqsave(&swim3_lock, flags); intr = in_8(&sw->intr); err = (intr & ERROR_INTR)? in_8(&sw->error): 0; if ((intr & ERROR_INTR) && fs->state != do_transfer) - printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n", - fs->state, rq_data_dir(fd_req), intr, err); + swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n", + fs->state, rq_data_dir(req), intr, err); switch (fs->state) { case locating: if (intr & SEEN_SECTOR) { @@ -653,10 +699,10 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) del_timer(&fs->timeout); fs->timeout_pending = 0; if (sw->ctrack == 0xff) { - printk(KERN_ERR "swim3: seen sector but cyl=ff?\n"); + swim3_err("%s", "Seen sector but cyl=ff?\n"); fs->cur_cyl = -1; if (fs->retries > 5) { - swim3_end_request_cur(-EIO); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); } else { @@ -668,8 +714,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) fs->cur_cyl = sw->ctrack; fs->cur_sector = sw->csect; if (fs->expect_cyl != -1 && fs->expect_cyl != fs->cur_cyl) - printk(KERN_ERR "swim3: expected cyl %d, got %d\n", - fs->expect_cyl, fs->cur_cyl); + swim3_err("Expected cyl %d, got %d\n", + fs->expect_cyl, fs->cur_cyl); fs->state = do_transfer; act(fs); } @@ -704,7 +750,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) fs->timeout_pending = 0; dr = fs->dma; cp = fs->dma_cmd; - if (rq_data_dir(fd_req) == WRITE) + if (rq_data_dir(req) == WRITE) ++cp; /* * Check that the main data transfer has finished. @@ -729,31 +775,32 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) if (intr & ERROR_INTR) { n = fs->scount - 1 - resid / 512; if (n > 0) { - blk_update_request(fd_req, 0, n << 9); + blk_update_request(req, 0, n << 9); fs->req_sector += n; } if (fs->retries < 5) { ++fs->retries; act(fs); } else { - printk("swim3: error %sing block %ld (err=%x)\n", - rq_data_dir(fd_req) == WRITE? "writ": "read", - (long)blk_rq_pos(fd_req), err); - swim3_end_request_cur(-EIO); + swim3_err("Error %sing block %ld (err=%x)\n", + rq_data_dir(req) == WRITE? "writ": "read", + (long)blk_rq_pos(req), err); + swim3_end_request(fs, -EIO, 0); fs->state = idle; } } else { if ((stat & ACTIVE) == 0 || resid != 0) { /* musta been an error */ - printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid); - printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n", - fs->state, rq_data_dir(fd_req), intr, err); - swim3_end_request_cur(-EIO); + swim3_err("fd dma error: stat=%x resid=%d\n", stat, resid); + swim3_err(" state=%d, dir=%x, intr=%x, err=%x\n", + fs->state, rq_data_dir(req), intr, err); + swim3_end_request(fs, -EIO, 0); fs->state = idle; start_request(fs); break; } - if (swim3_end_request(0, fs->scount << 9)) { + fs->retries = 0; + if (swim3_end_request(fs, 0, fs->scount << 9)) { fs->req_sector += fs->scount; if (fs->req_sector > fs->secpertrack) { fs->req_sector -= fs->secpertrack; @@ -770,8 +817,9 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id) start_request(fs); break; default: - printk(KERN_ERR "swim3: don't know what to do in state %d\n", fs->state); + swim3_err("Don't know what to do in state %d\n", fs->state); } + spin_unlock_irqrestore(&swim3_lock, flags); return IRQ_HANDLED; } @@ -781,26 +829,31 @@ static void fd_dma_interrupt(int irq, void *dev_id) } */ +/* Called under the mutex to grab exclusive access to a drive */ static int grab_drive(struct floppy_state *fs, enum swim_state state, int interruptible) { unsigned long flags; - spin_lock_irqsave(&fs->lock, flags); - if (fs->state != idle) { + swim3_dbg("%s", "-> grab drive\n"); + + spin_lock_irqsave(&swim3_lock, flags); + if (fs->state != idle && fs->state != available) { ++fs->wanted; while (fs->state != available) { + spin_unlock_irqrestore(&swim3_lock, flags); if (interruptible && signal_pending(current)) { --fs->wanted; - spin_unlock_irqrestore(&fs->lock, flags); return -EINTR; } interruptible_sleep_on(&fs->wait); + spin_lock_irqsave(&swim3_lock, flags); } --fs->wanted; } fs->state = state; - spin_unlock_irqrestore(&fs->lock, flags); + spin_unlock_irqrestore(&swim3_lock, flags); + return 0; } @@ -808,10 +861,12 @@ static void release_drive(struct floppy_state *fs) { unsigned long flags; - spin_lock_irqsave(&fs->lock, flags); + swim3_dbg("%s", "-> release drive\n"); + + spin_lock_irqsave(&swim3_lock, flags); fs->state = idle; start_request(fs); - spin_unlock_irqrestore(&fs->lock, flags); + spin_unlock_irqrestore(&swim3_lock, flags); } static int fd_eject(struct floppy_state *fs) @@ -966,6 +1021,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode) { struct floppy_state *fs = disk->private_data; struct swim3 __iomem *sw = fs->swim3; + mutex_lock(&swim3_mutex); if (fs->ref_count > 0 && --fs->ref_count == 0) { swim3_action(fs, MOTOR_OFF); @@ -1031,30 +1087,48 @@ static const struct block_device_operations floppy_fops = { .revalidate_disk= floppy_revalidate, }; +static void swim3_mb_event(struct macio_dev* mdev, int mb_state) +{ + struct floppy_state *fs = macio_get_drvdata(mdev); + struct swim3 __iomem *sw = fs->swim3; + + if (!fs) + return; + if (mb_state != MB_FD) + return; + + /* Clear state */ + out_8(&sw->intr_enable, 0); + in_8(&sw->intr); + in_8(&sw->error); +} + static int swim3_add_device(struct macio_dev *mdev, int index) { struct device_node *swim = mdev->ofdev.dev.of_node; struct floppy_state *fs = &floppy_states[index]; int rc = -EBUSY; + /* Do this first for message macros */ + memset(fs, 0, sizeof(*fs)); + fs->mdev = mdev; + fs->index = index; + /* Check & Request resources */ if (macio_resource_count(mdev) < 2) { - printk(KERN_WARNING "ifd%d: no address for %s\n", - index, swim->full_name); + swim3_err("%s", "No address in device-tree\n"); return -ENXIO; } - if (macio_irq_count(mdev) < 2) { - printk(KERN_WARNING "fd%d: no intrs for device %s\n", - index, swim->full_name); + if (macio_irq_count(mdev) < 1) { + swim3_err("%s", "No interrupt in device-tree\n"); + return -ENXIO; } if (macio_request_resource(mdev, 0, "swim3 (mmio)")) { - printk(KERN_ERR "fd%d: can't request mmio resource for %s\n", - index, swim->full_name); + swim3_err("%s", "Can't request mmio resource\n"); return -EBUSY; } if (macio_request_resource(mdev, 1, "swim3 (dma)")) { - printk(KERN_ERR "fd%d: can't request dma resource for %s\n", - index, swim->full_name); + swim3_err("%s", "Can't request dma resource\n"); macio_release_resource(mdev, 0); return -EBUSY; } @@ -1063,22 +1137,18 @@ static int swim3_add_device(struct macio_dev *mdev, int index) if (mdev->media_bay == NULL) pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1); - memset(fs, 0, sizeof(*fs)); - spin_lock_init(&fs->lock); fs->state = idle; fs->swim3 = (struct swim3 __iomem *) ioremap(macio_resource_start(mdev, 0), 0x200); if (fs->swim3 == NULL) { - printk("fd%d: couldn't map registers for %s\n", - index, swim->full_name); + swim3_err("%s", "Couldn't map mmio registers\n"); rc = -ENOMEM; goto out_release; } fs->dma = (struct dbdma_regs __iomem *) ioremap(macio_resource_start(mdev, 1), 0x200); if (fs->dma == NULL) { - printk("fd%d: couldn't map DMA for %s\n", - index, swim->full_name); + swim3_err("%s", "Couldn't map dma registers\n"); iounmap(fs->swim3); rc = -ENOMEM; goto out_release; @@ -1090,31 +1160,25 @@ static int swim3_add_device(struct macio_dev *mdev, int index) fs->secpercyl = 36; fs->secpertrack = 18; fs->total_secs = 2880; - fs->mdev = mdev; init_waitqueue_head(&fs->wait); fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space); memset(fs->dma_cmd, 0, 2 * sizeof(struct dbdma_cmd)); st_le16(&fs->dma_cmd[1].command, DBDMA_STOP); + if (mdev->media_bay == NULL || check_media_bay(mdev->media_bay) == MB_FD) + swim3_mb_event(mdev, MB_FD); + if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) { - printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n", - index, fs->swim3_intr, swim->full_name); + swim3_err("%s", "Couldn't request interrupt\n"); pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0); goto out_unmap; return -EBUSY; } -/* - if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) { - printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA", - fs->dma_intr); - return -EBUSY; - } -*/ init_timer(&fs->timeout); - printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count, + swim3_info("SWIM3 floppy controller %s\n", mdev->media_bay ? "in media bay" : ""); return 0; @@ -1132,41 +1196,42 @@ static int swim3_add_device(struct macio_dev *mdev, int index) static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match) { - int i, rc; struct gendisk *disk; + int index, rc; + + index = floppy_count++; + if (index >= MAX_FLOPPIES) + return -ENXIO; /* Add the drive */ - rc = swim3_add_device(mdev, floppy_count); + rc = swim3_add_device(mdev, index); if (rc) return rc; + /* Now register that disk. Same comment about failure handling */ + disk = disks[index] = alloc_disk(1); + if (disk == NULL) + return -ENOMEM; + disk->queue = blk_init_queue(do_fd_request, &swim3_lock); + if (disk->queue == NULL) { + put_disk(disk); + return -ENOMEM; + } + disk->queue->queuedata = &floppy_states[index]; - /* Now create the queue if not there yet */ - if (swim3_queue == NULL) { + if (index == 0) { /* If we failed, there isn't much we can do as the driver is still * too dumb to remove the device, just bail out */ if (register_blkdev(FLOPPY_MAJOR, "fd")) return 0; - swim3_queue = blk_init_queue(do_fd_request, &swim3_lock); - if (swim3_queue == NULL) { - unregister_blkdev(FLOPPY_MAJOR, "fd"); - return 0; - } } - /* Now register that disk. Same comment about failure handling */ - i = floppy_count++; - disk = disks[i] = alloc_disk(1); - if (disk == NULL) - return 0; - disk->major = FLOPPY_MAJOR; - disk->first_minor = i; + disk->first_minor = index; disk->fops = &floppy_fops; - disk->private_data = &floppy_states[i]; - disk->queue = swim3_queue; + disk->private_data = &floppy_states[index]; disk->flags |= GENHD_FL_REMOVABLE; - sprintf(disk->disk_name, "fd%d", i); + sprintf(disk->disk_name, "fd%d", index); set_capacity(disk, 2880); add_disk(disk); @@ -1194,6 +1259,9 @@ static struct macio_driver swim3_driver = .of_match_table = swim3_match, }, .probe = swim3_attach, +#ifdef CONFIG_PMAC_MEDIABAY + .mediabay_event = swim3_mb_event, +#endif #if 0 .suspend = swim3_suspend, .resume = swim3_resume, -- cgit v1.2.3-70-g09d2 From b5a7e97039a80fae673ccc115ce595d5b88fb4ee Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 12 Dec 2011 10:53:02 -0500 Subject: ext4: fix ext4_end_io_dio() racing against fsync() We need to make sure iocb->private is cleared *before* we put the io_end structure on i_completed_io_list. Otherwise fsync() could potentially run on another CPU and free the iocb structure out from under us. Reported-by: Kent Overstreet Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 848f436df29f..d2c86633811f 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2781,10 +2781,11 @@ static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset, iocb->private, io_end->inode->i_ino, iocb, offset, size); + iocb->private = NULL; + /* if not aio dio with unwritten extents, just free io and return */ if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) { ext4_free_io_end(io_end); - iocb->private = NULL; out: if (is_async) aio_complete(iocb, ret, 0); @@ -2807,7 +2808,6 @@ out: spin_unlock_irqrestore(&ei->i_completed_io_lock, flags); /* queue the work to convert unwritten extents to written */ - iocb->private = NULL; queue_work(wq, &io_end->work); /* XXX: probably should move into the real I/O completion handler */ -- cgit v1.2.3-70-g09d2 From b4611abfa98af8351bf32e8b9ecc9d3384931c37 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 12 Dec 2011 11:00:56 -0500 Subject: ext4: Fix crash due to getting bogus eh_depth value on big-endian systems Commit 1939dd84b3 ("ext4: cleanup ext4_ext_grow_indepth code") added a reference to ext4_extent_header.eh_depth, but forget to pass the value read through le16_to_cpu. The result is a crash on big-endian machines, such as this crash on a POWER7 server: attempt to access beyond end of device sda8: rw=0, want=776392648163376, limit=168558560 Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6bcb Faulting instruction address: 0xc0000000001f5f38 cpu 0x14: Vector: 300 (Data Access) at [c000001bd1aaecf0] pc: c0000000001f5f38: .__brelse+0x18/0x60 lr: c0000000002e07a4: .ext4_ext_drop_refs+0x44/0x80 sp: c000001bd1aaef70 msr: 9000000000009032 dar: 6b6b6b6b6b6b6bcb dsisr: 40000000 current = 0xc000001bd15b8010 paca = 0xc00000000ffe4600 pid = 19911, comm = flush-8:0 enter ? for help [c000001bd1aaeff0] c0000000002e07a4 .ext4_ext_drop_refs+0x44/0x80 [c000001bd1aaf090] c0000000002e0c58 .ext4_ext_find_extent+0x408/0x4c0 [c000001bd1aaf180] c0000000002e145c .ext4_ext_insert_extent+0x2bc/0x14c0 [c000001bd1aaf2c0] c0000000002e3fb8 .ext4_ext_map_blocks+0x628/0x1710 [c000001bd1aaf420] c0000000002b2974 .ext4_map_blocks+0x224/0x310 [c000001bd1aaf4d0] c0000000002b7f2c .mpage_da_map_and_submit+0xbc/0x490 [c000001bd1aaf5a0] c0000000002b8688 .write_cache_pages_da+0x2c8/0x430 [c000001bd1aaf720] c0000000002b8b28 .ext4_da_writepages+0x338/0x670 [c000001bd1aaf8d0] c000000000157280 .do_writepages+0x40/0x90 [c000001bd1aaf940] c0000000001ea830 .writeback_single_inode+0xe0/0x530 [c000001bd1aafa00] c0000000001eb680 .writeback_sb_inodes+0x210/0x300 [c000001bd1aafb20] c0000000001ebc84 .__writeback_inodes_wb+0xd4/0x140 [c000001bd1aafbe0] c0000000001ebfec .wb_writeback+0x2fc/0x3e0 [c000001bd1aafce0] c0000000001ed770 .wb_do_writeback+0x2f0/0x300 [c000001bd1aafdf0] c0000000001ed848 .bdi_writeback_thread+0xc8/0x340 [c000001bd1aafed0] c0000000000c5494 .kthread+0xb4/0xc0 [c000001bd1aaff90] c000000000021f48 .kernel_thread+0x54/0x70 This is due to getting ext_depth(inode) == 0x101 and therefore running off the end of the path array in ext4_ext_drop_refs into following unallocated structures. This fixes it by adding the necessary le16_to_cpu. Signed-off-by: Paul Mackerras Signed-off-by: "Theodore Ts'o" --- fs/ext4/extents.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 61fa9e1614af..61cdb97f338c 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1095,7 +1095,7 @@ static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode, le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block), ext4_idx_pblock(EXT_FIRST_INDEX(neh))); - neh->eh_depth = cpu_to_le16(neh->eh_depth + 1); + neh->eh_depth = cpu_to_le16(le16_to_cpu(neh->eh_depth) + 1); ext4_mark_inode_dirty(handle, inode); out: brelse(bh); -- cgit v1.2.3-70-g09d2 From 0b57d7602b68f7b2786b2f0e22da39cbd4139a95 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 8 Dec 2011 08:04:12 -0500 Subject: hwmon: (jz4740) fix signedness bug wait_for_completion_interruptible_timeout() may return negative value. In this case, checking if (t > 0) will return true if t is unsigned. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Cc: stable@kernel.org (3.0+) Signed-off-by: Guenter Roeck --- drivers/hwmon/jz4740-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index 7a48b1eb4233..3d7e590d57b7 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -59,7 +59,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev, { struct jz4740_hwmon *hwmon = dev_get_drvdata(dev); struct completion *completion = &hwmon->read_completion; - unsigned long t; + long t; unsigned long val; int ret; -- cgit v1.2.3-70-g09d2 From d6c4f2ac1de3c1ee10796740aa5b7a1e98a05f07 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 8 Dec 2011 08:33:37 -0500 Subject: hwmon: (jz4740) Staticise jz4740_hwmon_driver It is not used outside this driver so no need to make the symbol global. Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Guenter Roeck --- drivers/hwmon/jz4740-hwmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c index 3d7e590d57b7..5253d23361d9 100644 --- a/drivers/hwmon/jz4740-hwmon.c +++ b/drivers/hwmon/jz4740-hwmon.c @@ -203,7 +203,7 @@ static int __devexit jz4740_hwmon_remove(struct platform_device *pdev) return 0; } -struct platform_driver jz4740_hwmon_driver = { +static struct platform_driver jz4740_hwmon_driver = { .probe = jz4740_hwmon_probe, .remove = __devexit_p(jz4740_hwmon_remove), .driver = { -- cgit v1.2.3-70-g09d2 From f1932fc1a6d899c754676b1dd8b17de93b052d43 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Wed, 7 Dec 2011 09:10:26 -0800 Subject: crush: fix mapping calculation when force argument doesn't exist If the force argument isn't valid, we should continue calculating a mapping as if it weren't specified. Signed-off-by: Sage Weil --- net/ceph/crush/mapper.c | 35 +++++++++++++---------------------- 1 file changed, 13 insertions(+), 22 deletions(-) diff --git a/net/ceph/crush/mapper.c b/net/ceph/crush/mapper.c index 42599e31dcad..3a94eae7abe9 100644 --- a/net/ceph/crush/mapper.c +++ b/net/ceph/crush/mapper.c @@ -477,7 +477,6 @@ int crush_do_rule(struct crush_map *map, int i, j; int numrep; int firstn; - int rc = -1; BUG_ON(ruleno >= map->max_rules); @@ -491,23 +490,18 @@ int crush_do_rule(struct crush_map *map, * that this may or may not correspond to the specific types * referenced by the crush rule. */ - if (force >= 0) { - if (force >= map->max_devices || - map->device_parents[force] == 0) { - /*dprintk("CRUSH: forcefed device dne\n");*/ - rc = -1; /* force fed device dne */ - goto out; - } - if (!is_out(map, weight, force, x)) { - while (1) { - force_context[++force_pos] = force; - if (force >= 0) - force = map->device_parents[force]; - else - force = map->bucket_parents[-1-force]; - if (force == 0) - break; - } + if (force >= 0 && + force < map->max_devices && + map->device_parents[force] != 0 && + !is_out(map, weight, force, x)) { + while (1) { + force_context[++force_pos] = force; + if (force >= 0) + force = map->device_parents[force]; + else + force = map->bucket_parents[-1-force]; + if (force == 0) + break; } } @@ -600,10 +594,7 @@ int crush_do_rule(struct crush_map *map, BUG_ON(1); } } - rc = result_len; - -out: - return rc; + return result_len; } -- cgit v1.2.3-70-g09d2 From e1ad783b12ec8b69da83479c5d21a0d8180bc519 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Sun, 11 Dec 2011 16:12:42 -0800 Subject: Revert "x86, efi: Calling __pa() with an ioremap()ed address is invalid" This hangs my MacBook Air at boot time; I get no console messages at all. I reverted this on top of -rc5 and my machine boots again. This reverts commit e8c7106280a305e1ff2a3a8a4dfce141469fb039. Signed-off-by: Matt Fleming Signed-off-by: Keith Packard Acked-by: H. Peter Anvin Cc: Matthew Garrett Cc: Zhang Rui Cc: Huang Ying Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1321621751-3650-1-git-send-email-matt@console Signed-off-by: Ingo Molnar --- arch/x86/include/asm/e820.h | 8 -------- arch/x86/include/asm/efi.h | 5 +++++ arch/x86/kernel/e820.c | 3 +-- arch/x86/kernel/setup.c | 21 +-------------------- arch/x86/platform/efi/efi.c | 29 +++++++++++------------------ arch/x86/platform/efi/efi_64.c | 17 +++++++++++++++++ 6 files changed, 35 insertions(+), 48 deletions(-) diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h index c9547033e38e..908b96957d88 100644 --- a/arch/x86/include/asm/e820.h +++ b/arch/x86/include/asm/e820.h @@ -53,13 +53,6 @@ */ #define E820_RESERVED_KERN 128 -/* - * Address ranges that need to be mapped by the kernel direct - * mapping. This is used to make sure regions such as - * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch(). - */ -#define E820_RESERVED_EFI 129 - #ifndef __ASSEMBLY__ #include struct e820entry { @@ -122,7 +115,6 @@ static inline void early_memtest(unsigned long start, unsigned long end) } #endif -extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type); extern unsigned long e820_end_of_ram_pfn(void); extern unsigned long e820_end_of_low_ram_pfn(void); extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align); diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h index b8d8bfcd44a9..7093e4a6a0bc 100644 --- a/arch/x86/include/asm/efi.h +++ b/arch/x86/include/asm/efi.h @@ -33,6 +33,8 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...); #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \ efi_call_virt(f, a1, a2, a3, a4, a5, a6) +#define efi_ioremap(addr, size, type) ioremap_cache(addr, size) + #else /* !CONFIG_X86_32 */ extern u64 efi_call0(void *fp); @@ -82,6 +84,9 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3, efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \ (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6)) +extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size, + u32 type); + #endif /* CONFIG_X86_32 */ extern int add_efi_memmap; diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c index 65ffd110a81b..303a0e48f076 100644 --- a/arch/x86/kernel/e820.c +++ b/arch/x86/kernel/e820.c @@ -135,7 +135,6 @@ static void __init e820_print_type(u32 type) printk(KERN_CONT "(usable)"); break; case E820_RESERVED: - case E820_RESERVED_EFI: printk(KERN_CONT "(reserved)"); break; case E820_ACPI: @@ -784,7 +783,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align) /* * Find the highest page frame number we have available */ -unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) +static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type) { int i; unsigned long last_pfn = 0; diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 9a9e40fb091c..cf0ef986cb6d 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow); void __init setup_arch(char **cmdline_p) { - unsigned long end_pfn; - #ifdef CONFIG_X86_32 memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data)); visws_early_detect(); @@ -934,24 +932,7 @@ void __init setup_arch(char **cmdline_p) init_gbpages(); /* max_pfn_mapped is updated here */ - end_pfn = max_low_pfn; - -#ifdef CONFIG_X86_64 - /* - * There may be regions after the last E820_RAM region that we - * want to include in the kernel direct mapping, such as - * EFI_RUNTIME_SERVICES_DATA. - */ - if (efi_enabled) { - unsigned long efi_end; - - efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI); - if (efi_end > max_low_pfn) - end_pfn = efi_end; - } -#endif - - max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT); + max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn< (1UL << (32 - PAGE_SHIFT)) - && end_pfn <= max_pfn_mapped)) { + && end_pfn <= max_pfn_mapped)) va = __va(md->phys_addr); - - if (!(md->attribute & EFI_MEMORY_WB)) { - addr = (u64) (unsigned long)va; - npages = md->num_pages; - memrange_efi_to_native(&addr, &npages); - set_memory_uc(addr, npages); - } - } else { - if (!(md->attribute & EFI_MEMORY_WB)) - va = ioremap_nocache(md->phys_addr, size); - else - va = ioremap_cache(md->phys_addr, size); - } + else + va = efi_ioremap(md->phys_addr, size, md->type); md->virt_addr = (u64) (unsigned long) va; @@ -698,6 +684,13 @@ void __init efi_enter_virtual_mode(void) continue; } + if (!(md->attribute & EFI_MEMORY_WB)) { + addr = md->virt_addr; + npages = md->num_pages; + memrange_efi_to_native(&addr, &npages); + set_memory_uc(addr, npages); + } + systab = (u64) (unsigned long) efi_phys.systab; if (md->phys_addr <= systab && systab < end) { systab += md->virt_addr - md->phys_addr; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 312250c6b2de..ac3aa54e2654 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -80,3 +80,20 @@ void __init efi_call_phys_epilog(void) local_irq_restore(efi_flags); early_code_mapping_set_exec(0); } + +void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size, + u32 type) +{ + unsigned long last_map_pfn; + + if (type == EFI_MEMORY_MAPPED_IO) + return ioremap(phys_addr, size); + + last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size); + if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) { + unsigned long top = last_map_pfn << PAGE_SHIFT; + efi_ioremap(top, size - (top - phys_addr), type); + } + + return (void __iomem *)__va(phys_addr); +} -- cgit v1.2.3-70-g09d2 From 4b5d8da88e3fab76700e89488a8c65c54facb9a3 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 12 Dec 2011 16:02:15 -0200 Subject: Revert "[media] af9015: limit I2C access to keep FW happy" This reverts commit ff83bd82cb343d37b5ab8e402aaad9ef33d03f1e. As requested by Antti: From a talk with him at #linuxtv irc, he strong feeling that some apps like MythTV will do a lot a lot of I2C I/O and now it adds locks, with utimatelly means more delays. This could cause bad effects. There is a new patch for 3.3 that re-writes af9013 in order to limit I2C I/O. and thus those patches could be nice to have together because those user who has has problems are most likely MythTV users. So, let's revert this commit for now. Requested-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/af9015.c | 97 -------------------------------------- drivers/media/dvb/dvb-usb/af9015.h | 7 --- 2 files changed, 104 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c index 033aa8affd8e..c6c275bac08e 100644 --- a/drivers/media/dvb/dvb-usb/af9015.c +++ b/drivers/media/dvb/dvb-usb/af9015.c @@ -1093,80 +1093,9 @@ error: return ret; } -/* override demod callbacks for resource locking */ -static int af9015_af9013_set_frontend(struct dvb_frontend *fe, - struct dvb_frontend_parameters *params) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->set_frontend[adap->id](fe, params); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_read_status(struct dvb_frontend *fe, - fe_status_t *status) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->read_status[adap->id](fe, status); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_init(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->init[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - -/* override demod callbacks for resource locking */ -static int af9015_af9013_sleep(struct dvb_frontend *fe) -{ - int ret; - struct dvb_usb_adapter *adap = fe->dvb->priv; - struct af9015_state *priv = adap->dev->priv; - - if (mutex_lock_interruptible(&adap->dev->usb_mutex)) - return -EAGAIN; - - ret = priv->init[adap->id](fe); - - mutex_unlock(&adap->dev->usb_mutex); - - return ret; -} - static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) { int ret; - struct af9015_state *state = adap->dev->priv; if (adap->id == 1) { /* copy firmware to 2nd demodulator */ @@ -1187,32 +1116,6 @@ static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap) adap->fe_adap[0].fe = dvb_attach(af9013_attach, &af9015_af9013_config[adap->id], &adap->dev->i2c_adap); - /* - * AF9015 firmware does not like if it gets interrupted by I2C adapter - * request on some critical phases. During normal operation I2C adapter - * is used only 2nd demodulator and tuner on dual tuner devices. - * Override demodulator callbacks and use mutex for limit access to - * those "critical" paths to keep AF9015 happy. - * Note: we abuse unused usb_mutex here. - */ - if (adap->fe_adap[0].fe) { - state->set_frontend[adap->id] = - adap->fe_adap[0].fe->ops.set_frontend; - adap->fe_adap[0].fe->ops.set_frontend = - af9015_af9013_set_frontend; - - state->read_status[adap->id] = - adap->fe_adap[0].fe->ops.read_status; - adap->fe_adap[0].fe->ops.read_status = - af9015_af9013_read_status; - - state->init[adap->id] = adap->fe_adap[0].fe->ops.init; - adap->fe_adap[0].fe->ops.init = af9015_af9013_init; - - state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep; - adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep; - } - return adap->fe_adap[0].fe == NULL ? -ENODEV : 0; } diff --git a/drivers/media/dvb/dvb-usb/af9015.h b/drivers/media/dvb/dvb-usb/af9015.h index 4a126177e101..6252ea6c1904 100644 --- a/drivers/media/dvb/dvb-usb/af9015.h +++ b/drivers/media/dvb/dvb-usb/af9015.h @@ -102,13 +102,6 @@ struct af9015_state { u8 rc_repeat; u32 rc_keycode; u8 rc_last[4]; - - /* for demod callback override */ - int (*set_frontend[2]) (struct dvb_frontend *fe, - struct dvb_frontend_parameters *params); - int (*read_status[2]) (struct dvb_frontend *fe, fe_status_t *status); - int (*init[2]) (struct dvb_frontend *fe); - int (*sleep[2]) (struct dvb_frontend *fe); }; struct af9015_config { -- cgit v1.2.3-70-g09d2 From 0c8551e5fa3833c6080542da662394817fea4616 Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Mon, 12 Dec 2011 10:38:26 +0200 Subject: ARM: OMAP: mcbsp: Fix possible memory corruption Commits 09d28d ("ARM: OMAP: mcbsp: Start generalize omap2_mcbsp_set_clks_src") and 7bc0c4 ("ARM: OMAP: mcbsp: Start generalize signal muxing functions") incorrectly set two struct omap_mcbsp_platform_data fields after omap_device_build_ss and kfree calls. Fix this by moving these pdata assignments before those calls. Signed-off-by: Jarkko Nikula Reported-by: NeilBrown Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index 292eee3be15f..28fcb27005d2 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) pdata->reg_size = 4; pdata->has_ccr = true; } + pdata->set_clk_src = omap2_mcbsp_set_clk_src; + if (id == 1) + pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; if (oh->class->rev == MCBSP_CONFIG_TYPE3) { if (id == 2) @@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused) name, oh->name); return PTR_ERR(pdev); } - pdata->set_clk_src = omap2_mcbsp_set_clk_src; - if (id == 1) - pdata->mux_signal = omap2_mcbsp1_mux_rx_clk; omap_mcbsp_count++; return 0; } -- cgit v1.2.3-70-g09d2 From 414b591fd16655871e9f5592a55368b10a3ccc30 Mon Sep 17 00:00:00 2001 From: Alex Hermann Date: Mon, 12 Dec 2011 21:42:23 +0100 Subject: usb: option: Add Huawei E398 controlling interfaces MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch adds the controlling interfaces for the Huawei E398. Thanks to Bjørn Mork for extracting the interface numbers from the windows driver. Signed-off-by: Alex Hermann Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e3426602dc82..29907482261f 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -664,6 +664,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) }, -- cgit v1.2.3-70-g09d2 From 6abff5dc4d5a2c90e597137ce8987e7fd439259b Mon Sep 17 00:00:00 2001 From: Krzysztof Hałasa Date: Mon, 12 Dec 2011 14:51:00 +0100 Subject: USB: cdc-acm: add IDs for Motorola H24 HSPA USB module. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add USB IDs for Motorola H24 HSPA USB module. Signed-off-by: Krzysztof Hałasa Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e8c564a53346..a8078d0638fa 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1458,6 +1458,16 @@ static const struct usb_device_id acm_ids[] = { }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, + /* Motorola H24 HSPA module: */ + { USB_DEVICE(0x22b8, 0x2d91) }, /* modem */ + { USB_DEVICE(0x22b8, 0x2d92) }, /* modem + diagnostics */ + { USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port */ + { USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics */ + { USB_DEVICE(0x22b8, 0x2d96) }, /* modem + NMEA */ + { USB_DEVICE(0x22b8, 0x2d97) }, /* modem + diagnostics + NMEA */ + { USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port + NMEA */ + { USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */ + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on data interface instead of -- cgit v1.2.3-70-g09d2 From fc6cb1cda5db7b2d24bf32890826214b857c728e Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 12 Dec 2011 22:06:18 -0500 Subject: ext4: display the correct mount option in /proc/mounts for [no]init_itable /proc/mounts was showing the mount option [no]init_inode_table when the correct mount option that will be accepted by parse_options() is [no]init_itable. Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/super.c | 17 ++++++++--------- 1 file changed, 8 insertions(+), 9 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 3858767ec672..3e1329e2f826 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1155,9 +1155,9 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_puts(seq, ",block_validity"); if (!test_opt(sb, INIT_INODE_TABLE)) - seq_puts(seq, ",noinit_inode_table"); + seq_puts(seq, ",noinit_itable"); else if (sbi->s_li_wait_mult != EXT4_DEF_LI_WAIT_MULT) - seq_printf(seq, ",init_inode_table=%u", + seq_printf(seq, ",init_itable=%u", (unsigned) sbi->s_li_wait_mult); ext4_show_quota_options(seq, sb); @@ -1333,8 +1333,7 @@ enum { Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity, Opt_inode_readahead_blks, Opt_journal_ioprio, Opt_dioread_nolock, Opt_dioread_lock, - Opt_discard, Opt_nodiscard, - Opt_init_inode_table, Opt_noinit_inode_table, + Opt_discard, Opt_nodiscard, Opt_init_itable, Opt_noinit_itable, }; static const match_table_t tokens = { @@ -1407,9 +1406,9 @@ static const match_table_t tokens = { {Opt_dioread_lock, "dioread_lock"}, {Opt_discard, "discard"}, {Opt_nodiscard, "nodiscard"}, - {Opt_init_inode_table, "init_itable=%u"}, - {Opt_init_inode_table, "init_itable"}, - {Opt_noinit_inode_table, "noinit_itable"}, + {Opt_init_itable, "init_itable=%u"}, + {Opt_init_itable, "init_itable"}, + {Opt_noinit_itable, "noinit_itable"}, {Opt_err, NULL}, }; @@ -1892,7 +1891,7 @@ set_qf_format: case Opt_dioread_lock: clear_opt(sb, DIOREAD_NOLOCK); break; - case Opt_init_inode_table: + case Opt_init_itable: set_opt(sb, INIT_INODE_TABLE); if (args[0].from) { if (match_int(&args[0], &option)) @@ -1903,7 +1902,7 @@ set_qf_format: return 0; sbi->s_li_wait_mult = option; break; - case Opt_noinit_inode_table: + case Opt_noinit_itable: clear_opt(sb, INIT_INODE_TABLE); break; default: -- cgit v1.2.3-70-g09d2 From 13c07b0286d340275f2d97adf085cecda37ede37 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 12 Dec 2011 22:06:55 -0800 Subject: linux/log2.h: Fix rounddown_pow_of_two(1) Exactly like roundup_pow_of_two(1), the rounddown version was buggy for the case of a compile-time constant '1' argument. Probably because it originated from the same code, sharing history with the roundup version from before the bugfix (for that one, see commit 1a06a52ee1b0: "Fix roundup_pow_of_two(1)"). However, unlike the roundup version, the fix for rounddown is to just remove the broken special case entirely. It's simply not needed - the generic code 1UL << ilog2(n) does the right thing for the constant '1' argment too. The only reason roundup needed that special case was because rounding up does so by subtracting one from the argument (and then adding one to the result) causing the obvious problems with "ilog2(0)". But rounddown doesn't do any of that, since ilog2() naturally truncates (ie "rounds down") to the right rounded down value. And without the ilog2(0) case, there's no reason for the special case that had the wrong value. tl;dr: rounddown_pow_of_two(1) should be 1, not 0. Acked-by: Dmitry Torokhov Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- include/linux/log2.h | 1 - 1 file changed, 1 deletion(-) diff --git a/include/linux/log2.h b/include/linux/log2.h index 25b808631cd9..fd7ff3d91e6a 100644 --- a/include/linux/log2.h +++ b/include/linux/log2.h @@ -185,7 +185,6 @@ unsigned long __rounddown_pow_of_two(unsigned long n) #define rounddown_pow_of_two(n) \ ( \ __builtin_constant_p(n) ? ( \ - (n == 1) ? 0 : \ (1UL << ilog2(n))) : \ __rounddown_pow_of_two(n) \ ) -- cgit v1.2.3-70-g09d2 From 48706d0a91583d08c56e7ef2a7602d99c8d4133f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 13 Dec 2011 10:36:59 +0100 Subject: fuse: fix fuse_retrieve Fix two bugs in fuse_retrieve(): - retrieving more than one page would yield repeated instances of the first page - if more than FUSE_MAX_PAGES_PER_REQ pages were requested than the request page array would overflow fuse_retrieve() was added in 2.6.36 and these bugs had been there since the beginning. Signed-off-by: Miklos Szeredi CC: stable@vger.kernel.org --- fs/fuse/dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 5cb8614508c3..2aaf3eaaf13d 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1512,7 +1512,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, else if (outarg->offset + num > file_size) num = file_size - outarg->offset; - while (num) { + while (num && req->num_pages < FUSE_MAX_PAGES_PER_REQ) { struct page *page; unsigned int this_num; @@ -1526,6 +1526,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, num -= this_num; total_len += this_num; + index++; } req->misc.retrieve_in.offset = outarg->offset; req->misc.retrieve_in.size = total_len; -- cgit v1.2.3-70-g09d2 From b48c6af2086ab2ba8a9c9b6ce9ecb34592ce500c Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 13 Dec 2011 10:37:00 +0100 Subject: fuse: fix llseek bug The test in fuse_file_llseek() "not SEEK_CUR or not SEEK_SET" always evaluates to true. This was introduced in 3.1 by commit 06222e49 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) and changed the behavior of SEEK_CUR and SEEK_SET to always retrieve the file attributes. This is a performance regression. Fix the test so that it makes sense. Signed-off-by: Miklos Szeredi CC: stable@vger.kernel.org CC: Josef Bacik CC: Al Viro --- fs/fuse/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 594f07a81c28..19029e97ca2f 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1556,7 +1556,7 @@ static loff_t fuse_file_llseek(struct file *file, loff_t offset, int origin) struct inode *inode = file->f_path.dentry->d_inode; mutex_lock(&inode->i_mutex); - if (origin != SEEK_CUR || origin != SEEK_SET) { + if (origin != SEEK_CUR && origin != SEEK_SET) { retval = fuse_update_attributes(inode, NULL, file, NULL); if (retval) goto exit; -- cgit v1.2.3-70-g09d2 From 73104b6e37f75f822e3dcf016147c322d1f6dad9 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 13 Dec 2011 11:40:59 +0100 Subject: fuse: llseek fix race Fix race between lseek(fd, 0, SEEK_CUR) and read/write. This was fixed in generic code by commit 5b6f1eb97d (vfs: lseek(fd, 0, SEEK_CUR) race condition). Signed-off-by: Miklos Szeredi --- fs/fuse/file.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/fuse/file.c b/fs/fuse/file.c index 19029e97ca2f..0c84100acd44 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -1567,6 +1567,10 @@ static loff_t fuse_file_llseek(struct file *file, loff_t offset, int origin) offset += i_size_read(inode); break; case SEEK_CUR: + if (offset == 0) { + retval = file->f_pos; + goto exit; + } offset += file->f_pos; break; case SEEK_DATA: -- cgit v1.2.3-70-g09d2 From e2ef36c688d5844a986424c3194bd33212c968ce Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Tue, 13 Dec 2011 11:47:22 -0200 Subject: ALSA: hda: fix mute led polarity for HP laptops with buggy BIOS Some HP laptop models do not have a properly filled OEM string used to set the gpio and polarity of the mute led. Make the mute led configuration work for this case. Signed-off-by: Gustavo Maciel Dias Vieira Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index eeb25d529e30..616678fde486 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4929,6 +4929,12 @@ static int find_mute_led_gpio(struct hda_codec *codec, int default_polarity) set_hp_led_gpio(codec); return 1; } + /* BIOS bug: unfilled OEM string */ + if (strstr(dev->name, "HP_Mute_LED_P_G")) { + set_hp_led_gpio(codec); + spec->gpio_led_polarity = 1; + return 1; + } } /* -- cgit v1.2.3-70-g09d2 From 935a9fee51c945b8942be2d7b4bae069167b4886 Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 Dec 2011 12:39:14 -0800 Subject: ibft: Fix finding IBFT ACPI table on UEFI Found one system with UEFI/iBFT, kernel does not detect the iBFT during iscsi_ibft module loading. Root cause: on x86 (UEFI), we are calling of find_ibft_region() much earlier - specifically in setup_arch() before ACPI is enabled. Try to split acpi checking code out and call that later At that time ACPI iBFT already get permanent mapped with ioremap. So isa_virt_to_bus() will get wrong phys from right virt address. We could just skip that phys address printing. For legacy one, print the found address early. -v2: update comments and description according to Konrad. -v3: fix problem about module use case that is found by Konrad. -v4: use acpi_get_table() instead of acpi_table_parse() to handle module use case that is found by Konrad again.. Signed-off-by: Yinghai Lu Signed-off-by: Konrad Rzeszutek Wilk --- drivers/firmware/iscsi_ibft.c | 42 ++++++++++++++++++++++++++++++++++++-- drivers/firmware/iscsi_ibft_find.c | 26 ++--------------------- 2 files changed, 42 insertions(+), 26 deletions(-) diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c index c811cb107904..2cce44a1d7d0 100644 --- a/drivers/firmware/iscsi_ibft.c +++ b/drivers/firmware/iscsi_ibft.c @@ -746,6 +746,37 @@ static void __exit ibft_exit(void) ibft_cleanup(); } +#ifdef CONFIG_ACPI +static const struct { + char *sign; +} ibft_signs[] = { + /* + * One spec says "IBFT", the other says "iBFT". We have to check + * for both. + */ + { ACPI_SIG_IBFT }, + { "iBFT" }, +}; + +static void __init acpi_find_ibft_region(void) +{ + int i; + struct acpi_table_header *table = NULL; + + if (acpi_disabled) + return; + + for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) { + acpi_get_table(ibft_signs[i].sign, 0, &table); + ibft_addr = (struct acpi_table_ibft *)table; + } +} +#else +static void __init acpi_find_ibft_region(void) +{ +} +#endif + /* * ibft_init() - creates sysfs tree entries for the iBFT data. */ @@ -753,9 +784,16 @@ static int __init ibft_init(void) { int rc = 0; + /* + As on UEFI systems the setup_arch()/find_ibft_region() + is called before ACPI tables are parsed and it only does + legacy finding. + */ + if (!ibft_addr) + acpi_find_ibft_region(); + if (ibft_addr) { - printk(KERN_INFO "iBFT detected at 0x%llx.\n", - (u64)isa_virt_to_bus(ibft_addr)); + pr_info("iBFT detected.\n"); rc = ibft_check_device(); if (rc) diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c index bfe723266fd8..4da4eb9ae926 100644 --- a/drivers/firmware/iscsi_ibft_find.c +++ b/drivers/firmware/iscsi_ibft_find.c @@ -45,13 +45,6 @@ EXPORT_SYMBOL_GPL(ibft_addr); static const struct { char *sign; } ibft_signs[] = { -#ifdef CONFIG_ACPI - /* - * One spec says "IBFT", the other says "iBFT". We have to check - * for both. - */ - { ACPI_SIG_IBFT }, -#endif { "iBFT" }, { "BIFT" }, /* Broadcom iSCSI Offload */ }; @@ -62,14 +55,6 @@ static const struct { #define VGA_MEM 0xA0000 /* VGA buffer */ #define VGA_SIZE 0x20000 /* 128kB */ -#ifdef CONFIG_ACPI -static int __init acpi_find_ibft(struct acpi_table_header *header) -{ - ibft_addr = (struct acpi_table_ibft *)header; - return 0; -} -#endif /* CONFIG_ACPI */ - static int __init find_ibft_in_mem(void) { unsigned long pos; @@ -94,6 +79,7 @@ static int __init find_ibft_in_mem(void) * the table cannot be valid. */ if (pos + len <= (IBFT_END-1)) { ibft_addr = (struct acpi_table_ibft *)virt; + pr_info("iBFT found at 0x%lx.\n", pos); goto done; } } @@ -108,20 +94,12 @@ done: */ unsigned long __init find_ibft_region(unsigned long *sizep) { -#ifdef CONFIG_ACPI - int i; -#endif ibft_addr = NULL; -#ifdef CONFIG_ACPI - for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) - acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft); -#endif /* CONFIG_ACPI */ - /* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will * only use ACPI for this */ - if (!ibft_addr && !efi_enabled) + if (!efi_enabled) find_ibft_in_mem(); if (ibft_addr) { -- cgit v1.2.3-70-g09d2 From 6a82c47aa84ab22cb5969a44105cca5358879d21 Mon Sep 17 00:00:00 2001 From: Sage Weil Date: Tue, 13 Dec 2011 09:19:26 -0800 Subject: ceph: fix SEEK_CUR, SEEK_SET regression Commit 06222e491e663dac939f04b125c9dc52126a75c4 got the if wrong so that it always evaluates as true. This is semantically harmless, but makes SEEK_CUR and SEEK_SET needlessly query the server. Rewrite the if to explicitly enumerate the cases we DO need a valid i_size to make this code less fragile. Reported-by: Roel Kluin Signed-off-by: Sage Weil --- fs/ceph/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ceph/file.c b/fs/ceph/file.c index af187330cc89..ed72428d9c75 100644 --- a/fs/ceph/file.c +++ b/fs/ceph/file.c @@ -797,7 +797,8 @@ static loff_t ceph_llseek(struct file *file, loff_t offset, int origin) mutex_lock(&inode->i_mutex); __ceph_do_pending_vmtruncate(inode); - if (origin != SEEK_CUR || origin != SEEK_SET) { + + if (origin == SEEK_END || origin == SEEK_DATA || origin == SEEK_HOLE) { ret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE); if (ret < 0) { offset = ret; -- cgit v1.2.3-70-g09d2 From 5cc361e3b8241989d8240014dbbe6214c9292541 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 12 Dec 2011 23:58:21 -0500 Subject: ubifs: too early register_filesystem() doing that before you are ready to handle mount() is a Bad Idea(tm)... Signed-off-by: Al Viro --- fs/ubifs/super.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 20403dc5d437..ae0e76bb6ebf 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -2264,19 +2264,12 @@ static int __init ubifs_init(void) return -EINVAL; } - err = register_filesystem(&ubifs_fs_type); - if (err) { - ubifs_err("cannot register file system, error %d", err); - return err; - } - - err = -ENOMEM; ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab", sizeof(struct ubifs_inode), 0, SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT, &inode_slab_ctor); if (!ubifs_inode_slab) - goto out_reg; + return -ENOMEM; register_shrinker(&ubifs_shrinker_info); @@ -2288,15 +2281,20 @@ static int __init ubifs_init(void) if (err) goto out_compr; + err = register_filesystem(&ubifs_fs_type); + if (err) { + ubifs_err("cannot register file system, error %d", err); + goto out_dbg; + } return 0; +out_dbg: + dbg_debugfs_exit(); out_compr: ubifs_compressors_exit(); out_shrinker: unregister_shrinker(&ubifs_shrinker_info); kmem_cache_destroy(ubifs_inode_slab); -out_reg: - unregister_filesystem(&ubifs_fs_type); return err; } /* late_initcall to let compressors initialize first */ -- cgit v1.2.3-70-g09d2 From 988f032567eaba3c5896c5de05270b9ff71b2a9d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 13 Dec 2011 12:25:27 -0500 Subject: fuse: register_filesystem() called too early same story as with ubifs Signed-off-by: Al Viro --- fs/fuse/inode.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 3e6d72756479..aa83109b9431 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -1138,28 +1138,28 @@ static int __init fuse_fs_init(void) { int err; - err = register_filesystem(&fuse_fs_type); - if (err) - goto out; - - err = register_fuseblk(); - if (err) - goto out_unreg; - fuse_inode_cachep = kmem_cache_create("fuse_inode", sizeof(struct fuse_inode), 0, SLAB_HWCACHE_ALIGN, fuse_inode_init_once); err = -ENOMEM; if (!fuse_inode_cachep) - goto out_unreg2; + goto out; + + err = register_fuseblk(); + if (err) + goto out2; + + err = register_filesystem(&fuse_fs_type); + if (err) + goto out3; return 0; - out_unreg2: + out3: unregister_fuseblk(); - out_unreg: - unregister_filesystem(&fuse_fs_type); + out2: + kmem_cache_destroy(fuse_inode_cachep); out: return err; } -- cgit v1.2.3-70-g09d2 From 7c6455e368bc87ef38df7b6ddba2339a67107bdf Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 13 Dec 2011 12:32:42 -0500 Subject: configfs: register_filesystem() called too early Signed-off-by: Al Viro --- fs/configfs/inode.c | 2 +- fs/configfs/mount.c | 36 +++++++++++++++++------------------- 2 files changed, 18 insertions(+), 20 deletions(-) diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c index ca418aaf6352..9d8715c45f25 100644 --- a/fs/configfs/inode.c +++ b/fs/configfs/inode.c @@ -292,7 +292,7 @@ int __init configfs_inode_init(void) return bdi_init(&configfs_backing_dev_info); } -void __exit configfs_inode_exit(void) +void configfs_inode_exit(void) { bdi_destroy(&configfs_backing_dev_info); } diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c index ecc62178beda..276e15cafd58 100644 --- a/fs/configfs/mount.c +++ b/fs/configfs/mount.c @@ -143,28 +143,26 @@ static int __init configfs_init(void) goto out; config_kobj = kobject_create_and_add("config", kernel_kobj); - if (!config_kobj) { - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - goto out; - } + if (!config_kobj) + goto out2; + + err = configfs_inode_init(); + if (err) + goto out3; err = register_filesystem(&configfs_fs_type); - if (err) { - printk(KERN_ERR "configfs: Unable to register filesystem!\n"); - kobject_put(config_kobj); - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - goto out; - } + if (err) + goto out4; - err = configfs_inode_init(); - if (err) { - unregister_filesystem(&configfs_fs_type); - kobject_put(config_kobj); - kmem_cache_destroy(configfs_dir_cachep); - configfs_dir_cachep = NULL; - } + return 0; +out4: + printk(KERN_ERR "configfs: Unable to register filesystem!\n"); + configfs_inode_exit(); +out3: + kobject_put(config_kobj); +out2: + kmem_cache_destroy(configfs_dir_cachep); + configfs_dir_cachep = NULL; out: return err; } -- cgit v1.2.3-70-g09d2 From 02a551c9755b799579e0a093bcc99b80b4dc1453 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Tue, 13 Dec 2011 05:33:02 +0100 Subject: USB: option: Removing one bogus and adding some new Huawei combinations MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Huawei use the product code HUAWEI_PRODUCT_E353 (0x1506) for a number of different devices, which each can appear with a number of different descriptor sets. Different types of interfaces can be identified by looking at the subclass and protocol fields Subclass 1 protocol 8 is actually the data interface of a CDC ECM set, with subclass 1 protocol 9 as the control interface. Neither support serial data communcation, and cannot therefore be supported by this driver. At the same time, add a few other sets which appear if the device is configured in "Windows mode" using this modeswitch message: 55534243000000000000000000000011060000000100000000000000000000 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 29907482261f..6dd64534fad0 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -663,7 +663,9 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) }, - { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */ -- cgit v1.2.3-70-g09d2 From b2888095feb3c651cba5904b0227622e82777b34 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 9 Dec 2011 16:56:08 -0600 Subject: gpio: pl061: drop extra check for NULL platform_data In adding DT binding support, the check for NULL platform_data got added back in inadvertently, so remove it. Signed-off-by: Rob Herring Signed-off-by: Grant Likely --- drivers/gpio/gpio-pl061.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c index 093c90bd3c1d..4102f63230fd 100644 --- a/drivers/gpio/gpio-pl061.c +++ b/drivers/gpio/gpio-pl061.c @@ -238,10 +238,6 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id) int ret, irq, i; static DECLARE_BITMAP(init_irq, NR_IRQS); - pdata = dev->dev.platform_data; - if (pdata == NULL) - return -ENODEV; - chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (chip == NULL) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From f9ea14efa5277c47efec341dee2c408b6b80f854 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 13 Dec 2011 23:53:49 +0800 Subject: gpio-ml-ioh: fix a bug in the interrupt handler GPIO's irq action's dev_id is set to the first struct ioh_gpio chip, so when loop checking the 8 chips, the "chip" should be changed according. Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/gpio/gpio-ml-ioh.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index ea8e73869250..92b6f51a206e 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -339,7 +339,7 @@ static irqreturn_t ioh_gpio_handler(int irq, void *dev_id) int i, j; int ret = IRQ_NONE; - for (i = 0; i < 8; i++) { + for (i = 0; i < 8; i++, chip++) { reg_val = ioread32(&chip->reg->regs[i].istatus); for (j = 0; j < num_ports[i]; j++) { if (reg_val & BIT(j)) { -- cgit v1.2.3-70-g09d2 From 4d052213ff8f71a4a70fc4eed71b773cfde51fcf Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 13 Dec 2011 23:53:50 +0800 Subject: gpio-ml-ioh: Add the irq_disable/irq_enable hooks for ml-ioh irq chip These hooks will be needed by the general disabl/enable_irq(); Signed-off-by: Feng Tang Signed-off-by: Grant Likely --- drivers/gpio/gpio-ml-ioh.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c index 92b6f51a206e..461958fc2264 100644 --- a/drivers/gpio/gpio-ml-ioh.c +++ b/drivers/gpio/gpio-ml-ioh.c @@ -332,6 +332,34 @@ static void ioh_irq_mask(struct irq_data *d) &chip->reg->regs[chip->ch].imask); } +static void ioh_irq_disable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien &= ~(1 << (d->irq - chip->irq_base)); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + +static void ioh_irq_enable(struct irq_data *d) +{ + struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); + struct ioh_gpio *chip = gc->private; + unsigned long flags; + u32 ien; + + spin_lock_irqsave(&chip->spinlock, flags); + ien = ioread32(&chip->reg->regs[chip->ch].ien); + ien |= 1 << (d->irq - chip->irq_base); + iowrite32(ien, &chip->reg->regs[chip->ch].ien); + spin_unlock_irqrestore(&chip->spinlock, flags); +} + static irqreturn_t ioh_gpio_handler(int irq, void *dev_id) { struct ioh_gpio *chip = dev_id; @@ -370,6 +398,8 @@ static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip, ct->chip.irq_mask = ioh_irq_mask; ct->chip.irq_unmask = ioh_irq_unmask; ct->chip.irq_set_type = ioh_irq_type; + ct->chip.irq_disable = ioh_irq_disable; + ct->chip.irq_enable = ioh_irq_enable; irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST | IRQ_NOPROBE, 0); -- cgit v1.2.3-70-g09d2 From 28538df0389a59ede9ccd6f327d2031f0044db87 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 13 Dec 2011 10:12:48 +0100 Subject: gpio: mpc8xxx: don't allow input-only pins to be output for MPC5121 Add a 5121-custom reject if an input-only pin is requested to be output (see 18.3.1.1 in the refman). Also, rewrite mach-specific quirk setup to consume less lines which scales better. Signed-off-by: Wolfram Sang [grant.likely: Fixed build error] Signed-off-by: Grant Likely --- drivers/gpio/gpio-mpc8xxx.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c index ec3fcf0a7e12..5cd04b65c556 100644 --- a/drivers/gpio/gpio-mpc8xxx.c +++ b/drivers/gpio/gpio-mpc8xxx.c @@ -132,6 +132,15 @@ static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val return 0; } +static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + /* GPIO 28..31 are input only on MPC5121 */ + if (gpio >= 28) + return -EINVAL; + + return mpc8xxx_gpio_dir_out(gc, gpio, val); +} + static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset) { struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc); @@ -340,11 +349,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np) mm_gc->save_regs = mpc8xxx_gpio_save_regs; gc->ngpio = MPC8XXX_GPIO_PINS; gc->direction_input = mpc8xxx_gpio_dir_in; - gc->direction_output = mpc8xxx_gpio_dir_out; - if (of_device_is_compatible(np, "fsl,mpc8572-gpio")) - gc->get = mpc8572_gpio_get; - else - gc->get = mpc8xxx_gpio_get; + gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ? + mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out; + gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ? + mpc8572_gpio_get : mpc8xxx_gpio_get; gc->set = mpc8xxx_gpio_set; gc->to_irq = mpc8xxx_gpio_to_irq; -- cgit v1.2.3-70-g09d2 From 619a5182d1f38a3d629ee48e04fa182ef9170052 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 13 Dec 2011 00:02:28 +0100 Subject: PCI hotplug: Always allow acpiphp to handle non-PCIe bridges Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug) added code that made the acpiphp driver completely ignore PCIe root complexes for which the kernel had been granted control of the native PCIe hotplug feature by the BIOS through _OSC. Unfortunately, however, this was a mistake, because on some systems there were PCI bridges supporting PCI (non-PCIe) hotplug under such root complexes and those bridges should have been handled by acpiphp. For this reason, revert the changes made by the commit mentioned above and make register_slot() in drivers/pci/hotplug/acpiphp_glue.c avoid registering hotplug slots for PCIe ports that belong to root complexes with native PCIe hotplug enabled (which means that the BIOS has granted the kernel control of this feature for the given root complex). This is reported to address the original issue fixed by commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a and to work on the system where that commit broke things. Signed-off-by: Rafael J. Wysocki Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 29 ++++++++++++----------------- 1 file changed, 12 insertions(+), 17 deletions(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index fce1c54a0c8d..68360d5b494a 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -132,6 +132,18 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle)) return AE_OK; + pdev = pbus->self; + if (pdev && pci_is_pcie(pdev)) { + tmp = acpi_find_root_bridge_handle(pdev); + if (tmp) { + struct acpi_pci_root *root = acpi_pci_find_root(tmp); + + if (root && (root->osc_control_set & + OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) + return AE_OK; + } + } + acpi_evaluate_integer(handle, "_ADR", NULL, &adr); device = (adr >> 16) & 0xffff; function = adr & 0xffff; @@ -459,17 +471,8 @@ static int add_bridge(acpi_handle handle) { acpi_status status; unsigned long long tmp; - struct acpi_pci_root *root; acpi_handle dummy_handle; - /* - * We shouldn't use this bridge if PCIe native hotplug control has been - * granted by the BIOS for it. - */ - root = acpi_pci_find_root(handle); - if (root && (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL)) - return -ENODEV; - /* if the bridge doesn't have _STA, we assume it is always there */ status = acpi_get_handle(handle, "_STA", &dummy_handle); if (ACPI_SUCCESS(status)) { @@ -1385,19 +1388,11 @@ static void handle_hotplug_event_func(acpi_handle handle, u32 type, static acpi_status find_root_bridges(acpi_handle handle, u32 lvl, void *context, void **rv) { - struct acpi_pci_root *root; int *count = (int *)context; if (!acpi_is_root_bridge(handle)) return AE_OK; - root = acpi_pci_find_root(handle); - if (!root) - return AE_OK; - - if (root->osc_control_set & OSC_PCI_EXPRESS_NATIVE_HP_CONTROL) - return AE_OK; - (*count)++; acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, handle_hotplug_event_bridge, NULL); -- cgit v1.2.3-70-g09d2 From 9d5a09e659f8414dd3713e2acbfaf8a9e9794aa1 Mon Sep 17 00:00:00 2001 From: Yehuda Sadeh Date: Tue, 13 Dec 2011 09:57:44 -0800 Subject: ceph: add missing spin_unlock at ceph_mdsc_build_path() one of the paths was missing spin_unlock Signed-off-by: Yehuda Sadeh --- fs/ceph/mds_client.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c index 34bc35084ae3..6203d805eb45 100644 --- a/fs/ceph/mds_client.c +++ b/fs/ceph/mds_client.c @@ -1495,6 +1495,7 @@ retry: pos, temp); } else if (stop_on_nosnap && inode && ceph_snap(inode) == CEPH_NOSNAP) { + spin_unlock(&temp->d_lock); break; } else { pos -= temp->d_name.len; -- cgit v1.2.3-70-g09d2 From 93b2ec0128c431148b216b8f7337c1a52131ef03 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 9 Dec 2011 09:39:15 +1100 Subject: rtc: Expire alarms after the time is set. If the alarm time programming in the rtc is ever in the past, it won't fire, and any other alarm will be queued after it so they won't fire either. So any time that the alarm might be in the past, we need to trigger the irq handler to ensure the old alarm is cleared and the timer queue is fully in the future. This can happen: - when we first initialise the alarm - when we set the time in the rtc. so follow both of these by scheduling the timer work function. CC: stable@kernel.org Signed-off-by: NeilBrown [Also catch set_mmss case -jstultz] Signed-off-by: John Stultz --- drivers/rtc/interface.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index fa4d9f324189..3bcc7cfcaba7 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -73,6 +73,8 @@ int rtc_set_time(struct rtc_device *rtc, struct rtc_time *tm) err = -EINVAL; mutex_unlock(&rtc->ops_lock); + /* A timer might have just expired */ + schedule_work(&rtc->irqwork); return err; } EXPORT_SYMBOL_GPL(rtc_set_time); @@ -112,6 +114,8 @@ int rtc_set_mmss(struct rtc_device *rtc, unsigned long secs) err = -EINVAL; mutex_unlock(&rtc->ops_lock); + /* A timer might have just expired */ + schedule_work(&rtc->irqwork); return err; } @@ -403,6 +407,8 @@ int rtc_initialize_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) timerqueue_add(&rtc->timerqueue, &rtc->aie_timer.node); } mutex_unlock(&rtc->ops_lock); + /* maybe that was in the past.*/ + schedule_work(&rtc->irqwork); return err; } EXPORT_SYMBOL_GPL(rtc_initialize_alarm); -- cgit v1.2.3-70-g09d2 From c3b79770e51ab1fd4201f3b54edf30113b9ce74f Mon Sep 17 00:00:00 2001 From: John Stultz Date: Mon, 12 Dec 2011 13:57:52 -0800 Subject: rtc: m41t80: Workaround broken alarm functionality The m41t80 driver can read and set the alarm, but it doesn't seem to have a functional alarm irq. This causes failures when the generic core sees alarm functions, but then cannot use them properly for things like UIE mode. Disabling the alarm functions allows proper error reporting, and possible fallback to emulated modes. Once someone fixes the alarm irq functionality, this can be restored. CC: stable@kernel.org CC: Matt Turner CC: Nico Macrionitis CC: Atsushi Nemoto Reported-by: Matt Turner Reported-by: Nico Macrionitis Tested-by: Nico Macrionitis Signed-off-by: John Stultz --- drivers/rtc/rtc-m41t80.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c index eda128fc1d38..64aedd8cc095 100644 --- a/drivers/rtc/rtc-m41t80.c +++ b/drivers/rtc/rtc-m41t80.c @@ -357,10 +357,19 @@ static int m41t80_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *t) static struct rtc_class_ops m41t80_rtc_ops = { .read_time = m41t80_rtc_read_time, .set_time = m41t80_rtc_set_time, + /* + * XXX - m41t80 alarm functionality is reported broken. + * until it is fixed, don't register alarm functions. + * .read_alarm = m41t80_rtc_read_alarm, .set_alarm = m41t80_rtc_set_alarm, + */ .proc = m41t80_rtc_proc, + /* + * See above comment on broken alarm + * .alarm_irq_enable = m41t80_rtc_alarm_irq_enable, + */ }; #if defined(CONFIG_RTC_INTF_SYSFS) || defined(CONFIG_RTC_INTF_SYSFS_MODULE) -- cgit v1.2.3-70-g09d2 From e5fe29c7198a1f6616286dfc8602a69da165cb3f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Thu, 8 Dec 2011 22:23:00 +0200 Subject: ARM: OMAP: rx51: fix USB Commit 10299e2e4e3ed3b16503d4e04edd48b33083f4e2 (ARM: RX-51: Enable isp1704 power on/off) added power management for isp1704. However, the transceiver should be powered on by default, otherwise USB doesn't work at all for networking during boot. All kernels after v3.0 are affected. Cc: stable@kernel.org Signed-off-by: Felipe Contreras Reviewed-by: Sebastian Reichel [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-rx51-peripherals.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ba1aa07bdb29..c15c5c9c9085 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = { static void __init rx51_charger_init(void) { WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, - GPIOF_OUT_INIT_LOW, "isp1704_reset")); + GPIOF_OUT_INIT_HIGH, "isp1704_reset")); platform_device_register(&rx51_charger_device); } -- cgit v1.2.3-70-g09d2 From 0a7e22e61e07a2ea479511f9620858be2f1507e8 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Mon, 14 Nov 2011 20:16:57 -0600 Subject: staging: tidspbridge: include module.h by default Fixes compilation break when compiled as part of the kernel: drivers/staging/tidspbridge/rmgr/drv_interface.c:134: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/staging/tidspbridge/rmgr/drv_interface.c:134: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:135: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/staging/tidspbridge/rmgr/drv_interface.c:135: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c:136: error: expected declaration specifiers or '...' before string constant drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: data definition has no type or storage class drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/staging/tidspbridge/rmgr/drv_interface.c:136: warning: function declaration isn't a prototype drivers/staging/tidspbridge/rmgr/drv_interface.c: In function 'omap34_xx_bridge_probe': drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: 'THIS_MODULE' undeclared (first use in this function) drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: (Each undeclared identifier is reported only once drivers/staging/tidspbridge/rmgr/drv_interface.c:359: error: for each function it appears in.) Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/rmgr/drv_interface.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c index c43c7e3421c8..76cfc6edecd9 100644 --- a/drivers/staging/tidspbridge/rmgr/drv_interface.c +++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c @@ -24,11 +24,7 @@ #include #include #include - -#ifdef MODULE #include -#endif - #include #include #include -- cgit v1.2.3-70-g09d2 From ed625b9143ee53fe610320908c89e22635ee6e87 Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 18 Nov 2011 16:18:54 -0600 Subject: staging: tidspbridge: request dmtimer clocks on init Given that dm timer framework doesn't support request of clocks by soft | hard irqs because some recent changes, tidspbridge needs to request its clocks on init and enable/disable them on demand. This was first seen on 3.2-rc1. Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/dsp-clock.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c index 3d1279c424a8..7eb56178fb64 100644 --- a/drivers/staging/tidspbridge/core/dsp-clock.c +++ b/drivers/staging/tidspbridge/core/dsp-clock.c @@ -54,6 +54,7 @@ /* Bridge GPT id (1 - 4), DM Timer id (5 - 8) */ #define DMT_ID(id) ((id) + 4) +#define DM_TIMER_CLOCKS 4 /* Bridge MCBSP id (6 - 10), OMAP Mcbsp id (0 - 4) */ #define MCBSP_ID(id) ((id) - 6) @@ -114,8 +115,13 @@ static s8 get_clk_type(u8 id) */ void dsp_clk_exit(void) { + int i; + dsp_clock_disable_all(dsp_clocks); + for (i = 0; i < DM_TIMER_CLOCKS; i++) + omap_dm_timer_free(timer[i]); + clk_put(iva2_clk); clk_put(ssi.sst_fck); clk_put(ssi.ssr_fck); @@ -130,9 +136,13 @@ void dsp_clk_exit(void) void dsp_clk_init(void) { static struct platform_device dspbridge_device; + int i, id; dspbridge_device.dev.bus = &platform_bus_type; + for (i = 0, id = 5; i < DM_TIMER_CLOCKS; i++, id++) + timer[i] = omap_dm_timer_request_specific(id); + iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck"); if (IS_ERR(iva2_clk)) dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk); @@ -204,8 +214,7 @@ int dsp_clk_enable(enum dsp_clk_id clk_id) clk_enable(iva2_clk); break; case GPT_CLK: - timer[clk_id - 1] = - omap_dm_timer_request_specific(DMT_ID(clk_id)); + status = omap_dm_timer_start(timer[clk_id - 1]); break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: @@ -281,7 +290,7 @@ int dsp_clk_disable(enum dsp_clk_id clk_id) clk_disable(iva2_clk); break; case GPT_CLK: - omap_dm_timer_free(timer[clk_id - 1]); + status = omap_dm_timer_stop(timer[clk_id - 1]); break; #ifdef CONFIG_OMAP_MCBSP case MCBSP_CLK: -- cgit v1.2.3-70-g09d2 From c7caf4d4c56aee40b995f5858ccf1c814f3d2da2 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 11 Dec 2011 10:27:54 -0600 Subject: staging: r8712u: Add new USB ID Add USB ID for Sitecom WLA-2000 v1.001 WLAN. Reported-and-tested-by: Roland Gruber Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rtl8712/usb_intf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c index fb2e89c3056c..5385da2e9cdb 100644 --- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -89,6 +89,7 @@ static struct usb_device_id rtl871x_usb_id_tbl[] = { {USB_DEVICE(0x0DF6, 0x0045)}, {USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */ {USB_DEVICE(0x0DF6, 0x004B)}, + {USB_DEVICE(0x0DF6, 0x005D)}, {USB_DEVICE(0x0DF6, 0x0063)}, /* Sweex */ {USB_DEVICE(0x177F, 0x0154)}, -- cgit v1.2.3-70-g09d2 From ea51d132dbf9b00063169c1159bee253d9649224 Mon Sep 17 00:00:00 2001 From: Andrea Arcangeli Date: Tue, 13 Dec 2011 21:41:15 -0500 Subject: ext4: avoid hangs in ext4_da_should_update_i_disksize() If the pte mapping in generic_perform_write() is unmapped between iov_iter_fault_in_readable() and iov_iter_copy_from_user_atomic(), the "copied" parameter to ->end_write can be zero. ext4 couldn't cope with it with delayed allocations enabled. This skips the i_disksize enlargement logic if copied is zero and no new data was appeneded to the inode. gdb> bt #0 0xffffffff811afe80 in ext4_da_should_update_i_disksize (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x1\ 08000, len=0x1000, copied=0x0, page=0xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2467 #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 #2 0xffffffff810d97f1 in generic_perform_write (iocb=, iov=, nr_segs=, pos=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2440 #3 generic_file_buffered_write (iocb=, iov=, nr_segs=, p\ os=0x108000, ppos=0xffff88001e26be40, count=, written=0x0) at mm/filemap.c:2482 #4 0xffffffff810db5d1 in __generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, ppos=0\ xffff88001e26be40) at mm/filemap.c:2600 #5 0xffffffff810db853 in generic_file_aio_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=, pos=) at mm/filemap.c:2632 #6 0xffffffff811a71aa in ext4_file_write (iocb=0xffff88001e26bde8, iov=0xffff88001e26bec8, nr_segs=0x1, pos=0x108000) a\ t fs/ext4/file.c:136 #7 0xffffffff811375aa in do_sync_write (filp=0xffff88003f606a80, buf=, len=, \ ppos=0xffff88001e26bf48) at fs/read_write.c:406 #8 0xffffffff81137e56 in vfs_write (file=0xffff88003f606a80, buf=0x1ec2960
, count=0x4\ 000, pos=0xffff88001e26bf48) at fs/read_write.c:435 #9 0xffffffff8113816c in sys_write (fd=, buf=0x1ec2960
, count=0x\ 4000) at fs/read_write.c:487 #10 #11 0x00007f120077a390 in __brk_reservation_fn_dmi_alloc__ () #12 0x0000000000000000 in ?? () gdb> print offset $22 = 0xffffffffffffffff gdb> print idx $23 = 0xffffffff gdb> print inode->i_blkbits $24 = 0xc gdb> up #1 ext4_da_write_end (file=0xffff88003f606a80, mapping=0xffff88001d3824e0, pos=0x108000, len=0x1000, copied=0x0, page=0\ xffffea0000d792e8, fsdata=0x0) at fs/ext4/inode.c:2512 2512 if (ext4_da_should_update_i_disksize(page, end)) { gdb> print start $25 = 0x0 gdb> print end $26 = 0xffffffffffffffff gdb> print pos $27 = 0x108000 gdb> print new_i_size $28 = 0x108000 gdb> print ((struct ext4_inode_info *)((char *)inode-((int)(&((struct ext4_inode_info *)0)->vfs_inode))))->i_disksize $29 = 0xd9000 gdb> down 2467 for (i = 0; i < idx; i++) gdb> print i $30 = 0xd44acbee This is 100% reproducible with some autonuma development code tuned in a very aggressive manner (not normal way even for knumad) which does "exotic" changes to the ptes. It wouldn't normally trigger but I don't see why it can't happen normally if the page is added to swap cache in between the two faults leading to "copied" being zero (which then hangs in ext4). So it should be fixed. Especially possible with lumpy reclaim (albeit disabled if compaction is enabled) as that would ignore the young bits in the ptes. Signed-off-by: Andrea Arcangeli Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index d2c86633811f..b5edc6e4bab9 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2508,7 +2508,7 @@ static int ext4_da_write_end(struct file *file, */ new_i_size = pos + copied; - if (new_i_size > EXT4_I(inode)->i_disksize) { + if (copied && new_i_size > EXT4_I(inode)->i_disksize) { if (ext4_da_should_update_i_disksize(page, end)) { down_write(&EXT4_I(inode)->i_data_sem); if (new_i_size > EXT4_I(inode)->i_disksize) { -- cgit v1.2.3-70-g09d2 From 13a79a4741d37fda2fbafb953f0f301dc007928f Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 21:51:55 -0500 Subject: ext4: avoid potential hang in mpage_submit_io() when blocksize < pagesize If there is an unwritten but clean buffer in a page and there is a dirty buffer after the buffer, then mpage_submit_io does not write the dirty buffer out. As a result, da_writepages loops forever. This patch fixes the problem by checking dirty flag. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/inode.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index b5edc6e4bab9..cf20e1fe7782 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1339,8 +1339,11 @@ static int mpage_da_submit_io(struct mpage_da_data *mpd, clear_buffer_unwritten(bh); } - /* skip page if block allocation undone */ - if (buffer_delay(bh) || buffer_unwritten(bh)) + /* + * skip page if block allocation undone and + * block is dirty + */ + if (ext4_bh_delay_or_unwritten(NULL, bh)) skip_page = 1; bh = bh->b_this_page; block_start += bh->b_size; -- cgit v1.2.3-70-g09d2 From 093e6e3666f47d29763a235b404c84ee47ba8bb0 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:05:05 -0500 Subject: ext4: correctly handle pages w/o buffers in ext4_discard_partial_buffers() If a page has been read into memory and never been written, it has no buffers, but we should handle the page in truncate or punch hole. VFS code of writing operations has handled holes correctly, so this patch removes the code handling holes in writing operations. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/inode.c | 41 ++--------------------------------------- 1 file changed, 2 insertions(+), 39 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index cf20e1fe7782..92655fd89657 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2390,7 +2390,6 @@ static int ext4_da_write_begin(struct file *file, struct address_space *mapping, pgoff_t index; struct inode *inode = mapping->host; handle_t *handle; - loff_t page_len; index = pos >> PAGE_CACHE_SHIFT; @@ -2437,13 +2436,6 @@ retry: */ if (pos + len > inode->i_size) ext4_truncate_failed_write(inode); - } else { - page_len = pos & (PAGE_CACHE_SIZE - 1); - if (page_len > 0) { - ret = ext4_discard_partial_page_buffers_no_lock(handle, - inode, page, pos - page_len, page_len, - EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED); - } } if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries)) @@ -2486,7 +2478,6 @@ static int ext4_da_write_end(struct file *file, loff_t new_i_size; unsigned long start, end; int write_mode = (int)(unsigned long)fsdata; - loff_t page_len; if (write_mode == FALL_BACK_TO_NONDELALLOC) { if (ext4_should_order_data(inode)) { @@ -2535,16 +2526,6 @@ static int ext4_da_write_end(struct file *file, } ret2 = generic_write_end(file, mapping, pos, len, copied, page, fsdata); - - page_len = PAGE_CACHE_SIZE - - ((pos + copied - 1) & (PAGE_CACHE_SIZE - 1)); - - if (page_len > 0) { - ret = ext4_discard_partial_page_buffers_no_lock(handle, - inode, page, pos + copied - 1, page_len, - EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED); - } - copied = ret2; if (ret2 < 0) ret = ret2; @@ -3206,26 +3187,8 @@ int ext4_discard_partial_page_buffers_no_lock(handle_t *handle, iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits); - if (!page_has_buffers(page)) { - /* - * If the range to be discarded covers a partial block - * we need to get the page buffers. This is because - * partial blocks cannot be released and the page needs - * to be updated with the contents of the block before - * we write the zeros on top of it. - */ - if ((from & (blocksize - 1)) || - ((from + length) & (blocksize - 1))) { - create_empty_buffers(page, blocksize, 0); - } else { - /* - * If there are no partial blocks, - * there is nothing to update, - * so we can return now - */ - return 0; - } - } + if (!page_has_buffers(page)) + create_empty_buffers(page, blocksize, 0); /* Find the buffer that contains "offset" */ bh = page_buffers(page); -- cgit v1.2.3-70-g09d2 From 5b5ffa49d4bbb8ca4c41c094261660264f16bd20 Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:13:42 -0500 Subject: ext4: remove a wrong BUG_ON in ext4_ext_convert_to_initialized If a file is fallocated on a hole, map->m_lblk + map->m_len may be greater than ee_block + ee_len. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/extents.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 61cdb97f338c..607b1557d292 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -2955,7 +2955,6 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, /* Pre-conditions */ BUG_ON(!ext4_ext_is_uninitialized(ex)); BUG_ON(!in_range(map->m_lblk, ee_block, ee_len)); - BUG_ON(map->m_lblk + map->m_len > ee_block + ee_len); /* * Attempt to transfer newly initialized blocks from the currently -- cgit v1.2.3-70-g09d2 From 5a0dc7365c240795bf190766eba7a27600be3b3e Mon Sep 17 00:00:00 2001 From: Yongqiang Yang Date: Tue, 13 Dec 2011 22:29:12 -0500 Subject: ext4: handle EOF correctly in ext4_bio_write_page() We need to zero out part of a page which beyond EOF before setting uptodate, otherwise, mapread or write will see non-zero data beyond EOF. Signed-off-by: Yongqiang Yang Signed-off-by: "Theodore Ts'o" Cc: stable@kernel.org --- fs/ext4/page-io.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c index 7ce1d0b19c94..7e106c810c62 100644 --- a/fs/ext4/page-io.c +++ b/fs/ext4/page-io.c @@ -385,6 +385,18 @@ int ext4_bio_write_page(struct ext4_io_submit *io, block_end = block_start + blocksize; if (block_start >= len) { + /* + * Comments copied from block_write_full_page_endio: + * + * The page straddles i_size. It must be zeroed out on + * each and every writepage invocation because it may + * be mmapped. "A file is mapped in multiples of the + * page size. For a file that is not a multiple of + * the page size, the remaining memory is zeroed when + * mapped, and writes to that region are not written + * out to the file." + */ + zero_user_segment(page, block_start, block_end); clear_buffer_dirty(bh); set_buffer_uptodate(bh); continue; -- cgit v1.2.3-70-g09d2 From 759c361eb95964d0d786f8962224dd0d9e780e6e Mon Sep 17 00:00:00 2001 From: Djalal Harouni Date: Tue, 13 Dec 2011 02:47:29 +0100 Subject: fs/ncpfs: fix error paths and goto statements in ncp_fill_super() The label 'out_bdi' should be followed by bdi_destroy() instead of fput() which should be after the 'out_fput' label. If bdi_setup_and_register() fails then jump to the 'out_fput' label instead of the 'out_bdi' one. If fget(data.info_fd) fails then jump to the previously fixed 'out_bdi' label to call bdi_destroy() otherwise the bdi object will not be destroyed. Compile tested only. Signed-off-by: Djalal Harouni Signed-off-by: Al Viro --- fs/ncpfs/inode.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c index 5b5fa33b6b9d..cbd1a61c110a 100644 --- a/fs/ncpfs/inode.c +++ b/fs/ncpfs/inode.c @@ -548,7 +548,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent) error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY); if (error) - goto out_bdi; + goto out_fput; server->ncp_filp = ncp_filp; server->ncp_sock = sock; @@ -559,7 +559,7 @@ static int ncp_fill_super(struct super_block *sb, void *raw_data, int silent) error = -EBADF; server->info_filp = fget(data.info_fd); if (!server->info_filp) - goto out_fput; + goto out_bdi; error = -ENOTSOCK; sock_inode = server->info_filp->f_path.dentry->d_inode; if (!S_ISSOCK(sock_inode->i_mode)) @@ -746,9 +746,9 @@ out_nls: out_fput2: if (server->info_filp) fput(server->info_filp); -out_fput: - bdi_destroy(&server->bdi); out_bdi: + bdi_destroy(&server->bdi); +out_fput: /* 23/12/1998 Marcin Dalecki : * * The previously used put_filp(ncp_filp); was bogus, since -- cgit v1.2.3-70-g09d2 From ccc080c77cd47fde5eb097058fae930b956096eb Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 13 Dec 2011 10:32:42 +0530 Subject: usb: musb: fix reset issue with full speed device TXMAXP register is not getting programmed correctly for a full speed device as can_bulk_split() have been removed by "0662481: usb: musb: disable double buffering when it's broken" patch. Adding back the case for can_bulk_split() to fix the reset message seen with a full speed stick. Signed-off-by: Ajay Kumar Gupta Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_host.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 60ddba8066ea..79cb0af779fa 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -774,6 +774,10 @@ static void musb_ep_program(struct musb *musb, u8 epnum, if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else if (can_bulk_split(musb, qh->type)) + musb_writew(epio, MUSB_TXMAXP, packet_sz + | ((hw_ep->max_packet_sz_tx / + packet_sz) - 1) << 11); else musb_writew(epio, MUSB_TXMAXP, qh->maxpacket | -- cgit v1.2.3-70-g09d2 From 44b7f4b98d8877e2a4427f2a2f2e42ae8227a58f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Tue, 13 Dec 2011 20:40:45 +0100 Subject: perf events: Fix ring_buffer_wakeup() brown paperbag bug Commit 10c6db11 ("perf: Fix loss of notification with multi-event") seems to unconditionally dereference event->rb in the wakeup handler, this is wrong, there might not be a buffer attached. Signed-off-by: Will Deacon Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20111213152651.GP20297@mudshark.cambridge.arm.com [ minor edits ] Signed-off-by: Ingo Molnar --- kernel/events/core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index d3b9df5962c2..58690af323e4 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3558,9 +3558,13 @@ static void ring_buffer_wakeup(struct perf_event *event) rcu_read_lock(); rb = rcu_dereference(event->rb); - list_for_each_entry_rcu(event, &rb->event_list, rb_entry) { + if (!rb) + goto unlock; + + list_for_each_entry_rcu(event, &rb->event_list, rb_entry) wake_up_all(&event->waitq); - } + +unlock: rcu_read_unlock(); } -- cgit v1.2.3-70-g09d2 From 7e1e7ead88dff75b11b86ee0d5232c4591be1326 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Fri, 11 Nov 2011 20:52:01 +0100 Subject: [SCSI] fcoe: Fix preempt count leak in fcoe_filter_frames() The error exit path leaks preempt count. Add the missing put_cpu(). Signed-off-by: Thomas Gleixner Reviewed-by: Yi Zou Cc: stable@kernel.org Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index cefbe44bb84a..f3f440c955f3 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -1624,6 +1624,7 @@ static inline int fcoe_filter_frames(struct fc_lport *lport, stats->InvalidCRCCount++; if (stats->InvalidCRCCount < 5) printk(KERN_WARNING "fcoe: dropping frame with CRC error\n"); + put_cpu(); return -EINVAL; } -- cgit v1.2.3-70-g09d2 From 44f747fff6e9f027a4866c1a6864e26ae7c510c8 Mon Sep 17 00:00:00 2001 From: Steffen Maier Date: Fri, 18 Nov 2011 20:00:40 +0100 Subject: [SCSI] zfcp: return early from slave_destroy if slave_alloc returned early zfcp_scsi_slave_destroy erroneously always tried to finish its task even if the corresponding previous zfcp_scsi_slave_alloc returned early. This can lead to kernel page faults on accessing uninitialized fields of struct zfcp_scsi_dev in zfcp_erp_lun_shutdown_wait. Take the port field of the struct to determine if slave_alloc returned early. This zfcp bug is exposed by 4e6c82b (in turn fixing f7c9c6b to be compatible with 21208ae) which can call slave_destroy for a corresponding previous slave_alloc that did not finish. This patch is based on James Bottomley's fix suggestion in http://www.spinics.net/lists/linux-scsi/msg55449.html. Signed-off-by: Steffen Maier Cc: #2.6.38+ Signed-off-by: James Bottomley --- drivers/s390/scsi/zfcp_scsi.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c index 11f07f888223..b79576b64f45 100644 --- a/drivers/s390/scsi/zfcp_scsi.c +++ b/drivers/s390/scsi/zfcp_scsi.c @@ -55,6 +55,10 @@ static void zfcp_scsi_slave_destroy(struct scsi_device *sdev) { struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); + /* if previous slave_alloc returned early, there is nothing to do */ + if (!zfcp_sdev->port) + return; + zfcp_erp_lun_shutdown_wait(sdev, "scssd_1"); put_device(&zfcp_sdev->port->dev); } -- cgit v1.2.3-70-g09d2 From 13483730a13bef372894aefcf73760f5c6c297be Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 1 Dec 2011 21:38:41 -0600 Subject: [SCSI] qla4xxx: fix flash/ddb support With open-iscsi support, target entries persisted in the FLASH were not login. Added support in the qla4xxx driver to do the login on probe time to the target entries saved in the FLASH by user. With this changes upgrade to the new kernel with open-iscsi support in qla4xxx will ensure users original target entries login on driver load Signed-off-by: Manish Rangankar Signed-off-by: Ravi Anand Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_def.h | 55 +- drivers/scsi/qla4xxx/ql4_fw.h | 8 + drivers/scsi/qla4xxx/ql4_glbl.h | 16 +- drivers/scsi/qla4xxx/ql4_init.c | 239 ++++++-- drivers/scsi/qla4xxx/ql4_mbx.c | 11 + drivers/scsi/qla4xxx/ql4_os.c | 1081 ++++++++++++++++++++++++++++++++++-- drivers/scsi/qla4xxx/ql4_version.h | 2 +- 7 files changed, 1315 insertions(+), 97 deletions(-) diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index ace637bf254e..fd5edc6e166d 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -147,7 +147,7 @@ #define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */ #define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */ -#define QL4_SESS_RECOVERY_TMO 30 /* iSCSI session */ +#define QL4_SESS_RECOVERY_TMO 120 /* iSCSI session */ /* recovery timeout */ #define LSDW(x) ((u32)((u64)(x))) @@ -173,6 +173,8 @@ #define ISNS_DEREG_TOV 5 #define HBA_ONLINE_TOV 30 #define DISABLE_ACB_TOV 30 +#define IP_CONFIG_TOV 30 +#define LOGIN_TOV 12 #define MAX_RESET_HA_RETRIES 2 @@ -240,6 +242,45 @@ struct ddb_entry { uint16_t fw_ddb_index; /* DDB firmware index */ uint32_t fw_ddb_device_state; /* F/W Device State -- see ql4_fw.h */ + uint16_t ddb_type; +#define FLASH_DDB 0x01 + + struct dev_db_entry fw_ddb_entry; + int (*unblock_sess)(struct iscsi_cls_session *cls_session); + int (*ddb_change)(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); + + /* Driver Re-login */ + unsigned long flags; /* DDB Flags */ + uint16_t default_relogin_timeout; /* Max time to wait for + * relogin to complete */ + atomic_t retry_relogin_timer; /* Min Time between relogins + * (4000 only) */ + atomic_t relogin_timer; /* Max Time to wait for + * relogin to complete */ + atomic_t relogin_retry_count; /* Num of times relogin has been + * retried */ + uint32_t default_time2wait; /* Default Min time between + * relogins (+aens) */ + +}; + +struct qla_ddb_index { + struct list_head list; + uint16_t fw_ddb_idx; + struct dev_db_entry fw_ddb; +}; + +#define DDB_IPADDR_LEN 64 + +struct ql4_tuple_ddb { + int port; + int tpgt; + char ip_addr[DDB_IPADDR_LEN]; + char iscsi_name[ISCSI_NAME_SIZE]; + uint16_t options; +#define DDB_OPT_IPV6 0x0e0e +#define DDB_OPT_IPV4 0x0f0f }; /* @@ -411,7 +452,7 @@ struct scsi_qla_host { #define AF_FW_RECOVERY 19 /* 0x00080000 */ #define AF_EEH_BUSY 20 /* 0x00100000 */ #define AF_PCI_CHANNEL_IO_PERM_FAILURE 21 /* 0x00200000 */ - +#define AF_BUILD_DDB_LIST 22 /* 0x00400000 */ unsigned long dpc_flags; #define DPC_RESET_HA 1 /* 0x00000002 */ @@ -604,6 +645,7 @@ struct scsi_qla_host { uint16_t bootload_minor; uint16_t bootload_patch; uint16_t bootload_build; + uint16_t def_timeout; /* Default login timeout */ uint32_t flash_state; #define QLFLASH_WAITING 0 @@ -623,6 +665,11 @@ struct scsi_qla_host { uint16_t iscsi_pci_func_cnt; uint8_t model_name[16]; struct completion disable_acb_comp; + struct dma_pool *fw_ddb_dma_pool; +#define DDB_DMA_BLOCK_SIZE 512 + uint16_t pri_ddb_idx; + uint16_t sec_ddb_idx; + int is_reset; }; struct ql4_task_data { @@ -835,6 +882,10 @@ static inline int ql4xxx_reset_active(struct scsi_qla_host *ha) /*---------------------------------------------------------------------------*/ /* Defines for qla4xxx_initialize_adapter() and qla4xxx_recover_adapter() */ + +#define INIT_ADAPTER 0 +#define RESET_ADAPTER 1 + #define PRESERVE_DDB_LIST 0 #define REBUILD_DDB_LIST 1 diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index cbd5a20dbbd1..4ac07f882521 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -12,6 +12,7 @@ #define MAX_PRST_DEV_DB_ENTRIES 64 #define MIN_DISC_DEV_DB_ENTRY MAX_PRST_DEV_DB_ENTRIES #define MAX_DEV_DB_ENTRIES 512 +#define MAX_DEV_DB_ENTRIES_40XX 256 /************************************************************************* * @@ -604,6 +605,13 @@ struct addr_ctrl_blk { uint8_t res14[140]; /* 274-2FF */ }; +#define IP_ADDR_COUNT 4 /* Total 4 IP address supported in one interface + * One IPv4, one IPv6 link local and 2 IPv6 + */ + +#define IP_STATE_MASK 0x0F000000 +#define IP_STATE_SHIFT 24 + struct init_fw_ctrl_blk { struct addr_ctrl_blk pri; /* struct addr_ctrl_blk sec;*/ diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index 160db9d5ea21..d0dd4b330206 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -13,7 +13,7 @@ struct iscsi_cls_conn; int qla4xxx_hw_reset(struct scsi_qla_host *ha); int ql4xxx_lock_drvr_wait(struct scsi_qla_host *a); int qla4xxx_send_command_to_isp(struct scsi_qla_host *ha, struct srb *srb); -int qla4xxx_initialize_adapter(struct scsi_qla_host *ha); +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset); int qla4xxx_soft_reset(struct scsi_qla_host *ha); irqreturn_t qla4xxx_intr_handler(int irq, void *dev_id); @@ -153,10 +153,13 @@ int qla4xxx_req_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index, uint32_t *mbx_sts); int qla4xxx_clear_ddb_entry(struct scsi_qla_host *ha, uint32_t fw_ddb_index); int qla4xxx_send_passthru0(struct iscsi_task *task); +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha); int qla4xxx_get_mgmt_data(struct scsi_qla_host *ha, uint16_t fw_ddb_index, uint16_t stats_size, dma_addr_t stats_dma); void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry); +void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry); int qla4xxx_bootdb_by_index(struct scsi_qla_host *ha, struct dev_db_entry *fw_ddb_entry, dma_addr_t fw_ddb_entry_dma, uint16_t ddb_index); @@ -169,11 +172,22 @@ int qla4xxx_set_nvram(struct scsi_qla_host *ha, dma_addr_t nvram_dma, int qla4xxx_restore_factory_defaults(struct scsi_qla_host *ha, uint32_t region, uint32_t field0, uint32_t field1); +int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index); +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session); +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state); +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset); /* BSG Functions */ int qla4xxx_bsg_request(struct bsg_job *bsg_job); int qla4xxx_process_vendor_specific(struct bsg_job *bsg_job); +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry); + extern int ql4xextended_error_logging; extern int ql4xdontresethba; extern int ql4xenablemsix; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 3075fbaef553..0497873a1dd2 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -773,14 +773,14 @@ int qla4xxx_start_firmware(struct scsi_qla_host *ha) * be freed so that when login happens from user space there are free DDB * indices available. **/ -static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) +void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) { int max_ddbs; int ret; uint32_t idx = 0, next_idx = 0; uint32_t state = 0, conn_err = 0; - max_ddbs = is_qla40XX(ha) ? MAX_PRST_DEV_DB_ENTRIES : + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : MAX_DEV_DB_ENTRIES; for (idx = 0; idx < max_ddbs; idx = next_idx) { @@ -804,7 +804,6 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) } } - /** * qla4xxx_initialize_adapter - initiailizes hba * @ha: Pointer to host adapter structure. @@ -812,7 +811,7 @@ static void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) * This routine parforms all of the steps necessary to initialize the adapter. * **/ -int qla4xxx_initialize_adapter(struct scsi_qla_host *ha) +int qla4xxx_initialize_adapter(struct scsi_qla_host *ha, int is_reset) { int status = QLA_ERROR; @@ -840,7 +839,8 @@ int qla4xxx_initialize_adapter(struct scsi_qla_host *ha) if (status == QLA_ERROR) goto exit_init_hba; - qla4xxx_free_ddb_index(ha); + if (is_reset == RESET_ADAPTER) + qla4xxx_build_ddb_list(ha, is_reset); set_bit(AF_ONLINE, &ha->flags); exit_init_hba: @@ -855,38 +855,12 @@ exit_init_hba: return status; } -/** - * qla4xxx_process_ddb_changed - process ddb state change - * @ha - Pointer to host adapter structure. - * @fw_ddb_index - Firmware's device database index - * @state - Device state - * - * This routine processes a Decive Database Changed AEN Event. - **/ -int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, - uint32_t state, uint32_t conn_err) +int qla4xxx_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) { - struct ddb_entry * ddb_entry; uint32_t old_fw_ddb_device_state; int status = QLA_ERROR; - /* check for out of range index */ - if (fw_ddb_index >= MAX_DDB_ENTRIES) - goto exit_ddb_event; - - /* Get the corresponging ddb entry */ - ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); - /* Device does not currently exist in our database. */ - if (ddb_entry == NULL) { - ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", - __func__, fw_ddb_index); - - if (state == DDB_DS_NO_CONNECTION_ACTIVE) - clear_bit(fw_ddb_index, ha->ddb_idx_map); - - goto exit_ddb_event; - } - old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; DEBUG2(ql4_printk(KERN_INFO, ha, "%s: DDB - old state = 0x%x, new state = 0x%x for " @@ -900,9 +874,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, switch (state) { case DDB_DS_SESSION_ACTIVE: case DDB_DS_DISCOVERY: - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); qla4xxx_update_session_conn_param(ha, ddb_entry); status = QLA_SUCCESS; break; @@ -936,9 +908,7 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, switch (state) { case DDB_DS_SESSION_ACTIVE: case DDB_DS_DISCOVERY: - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); qla4xxx_update_session_conn_param(ha, ddb_entry); status = QLA_SUCCESS; break; @@ -954,7 +924,198 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, __func__)); break; } + return status; +} + +void qla4xxx_arm_relogin_timer(struct ddb_entry *ddb_entry) +{ + /* + * This triggers a relogin. After the relogin_timer + * expires, the relogin gets scheduled. We must wait a + * minimum amount of time since receiving an 0x8014 AEN + * with failed device_state or a logout response before + * we can issue another relogin. + * + * Firmware pads this timeout: (time2wait +1). + * Driver retry to login should be longer than F/W. + * Otherwise F/W will fail + * set_ddb() mbx cmd with 0x4005 since it still + * counting down its time2wait. + */ + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + +} + +int qla4xxx_flash_ddb_change(struct scsi_qla_host *ha, uint32_t fw_ddb_index, + struct ddb_entry *ddb_entry, uint32_t state) +{ + uint32_t old_fw_ddb_device_state; + int status = QLA_ERROR; + + old_fw_ddb_device_state = ddb_entry->fw_ddb_device_state; + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: DDB - old state = 0x%x, new state = 0x%x for " + "index [%d]\n", __func__, + ddb_entry->fw_ddb_device_state, state, fw_ddb_index)); + + ddb_entry->fw_ddb_device_state = state; + + switch (old_fw_ddb_device_state) { + case DDB_DS_LOGIN_IN_PROCESS: + case DDB_DS_NO_CONNECTION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_ACTIVE: + switch (state) { + case DDB_DS_SESSION_FAILED: + iscsi_block_session(ddb_entry->sess); + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + case DDB_DS_SESSION_FAILED: + switch (state) { + case DDB_DS_SESSION_ACTIVE: + ddb_entry->unblock_sess(ddb_entry->sess); + qla4xxx_update_session_conn_fwddb_param(ha, ddb_entry); + status = QLA_SUCCESS; + break; + case DDB_DS_SESSION_FAILED: + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + status = QLA_SUCCESS; + break; + } + break; + default: + DEBUG2(ql4_printk(KERN_INFO, ha, "%s: Unknown Event\n", + __func__)); + break; + } + return status; +} + +/** + * qla4xxx_process_ddb_changed - process ddb state change + * @ha - Pointer to host adapter structure. + * @fw_ddb_index - Firmware's device database index + * @state - Device state + * + * This routine processes a Decive Database Changed AEN Event. + **/ +int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, + uint32_t fw_ddb_index, + uint32_t state, uint32_t conn_err) +{ + struct ddb_entry *ddb_entry; + int status = QLA_ERROR; + + /* check for out of range index */ + if (fw_ddb_index >= MAX_DDB_ENTRIES) + goto exit_ddb_event; + + /* Get the corresponging ddb entry */ + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, fw_ddb_index); + /* Device does not currently exist in our database. */ + if (ddb_entry == NULL) { + ql4_printk(KERN_ERR, ha, "%s: No ddb_entry at FW index [%d]\n", + __func__, fw_ddb_index); + + if (state == DDB_DS_NO_CONNECTION_ACTIVE) + clear_bit(fw_ddb_index, ha->ddb_idx_map); + + goto exit_ddb_event; + } + + ddb_entry->ddb_change(ha, fw_ddb_index, ddb_entry, state); exit_ddb_event: return status; } + +/** + * qla4xxx_login_flash_ddb - Login to target (DDB) + * @cls_session: Pointer to the session to login + * + * This routine logins to the target. + * Issues setddb and conn open mbx + **/ +void qla4xxx_login_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + struct dev_db_entry *fw_ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + uint32_t mbx_sts = 0; + int ret; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!test_bit(AF_LINK_UP, &ha->flags)) + return; + + if (ddb_entry->ddb_type != FLASH_DDB) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Skipping login to non FLASH DB")); + goto exit_login; + } + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_login; + } + + if (ddb_entry->fw_ddb_index == INVALID_ENTRY) { + ret = qla4xxx_get_ddb_index(ha, &ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) + goto exit_login; + + ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; + ha->tot_ddbs++; + } + + memcpy(fw_ddb_entry, &ddb_entry->fw_ddb_entry, + sizeof(struct dev_db_entry)); + ddb_entry->sess->target_id = ddb_entry->fw_ddb_index; + + ret = qla4xxx_set_ddb_entry(ha, ddb_entry->fw_ddb_index, + fw_ddb_dma, &mbx_sts); + if (ret == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Set DDB failed\n")); + goto exit_login; + } + + ddb_entry->fw_ddb_device_state = DDB_DS_LOGIN_IN_PROCESS; + ret = qla4xxx_conn_open(ha, ddb_entry->fw_ddb_index); + if (ret == QLA_ERROR) { + ql4_printk(KERN_ERR, ha, "%s: Login failed: %s\n", __func__, + sess->targetname); + goto exit_login; + } + +exit_login: + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); +} + diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 4c2b84870392..c2593782fbbe 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -41,6 +41,16 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, return status; } + if (is_qla40XX(ha)) { + if (test_bit(AF_HA_REMOVAL, &ha->flags)) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: " + "prematurely completing mbx cmd as " + "adapter removal detected\n", + ha->host_no, __func__)); + return status; + } + } + if (is_qla8022(ha)) { if (test_bit(AF_FW_RECOVERY, &ha->flags)) { DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: " @@ -413,6 +423,7 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, memcpy(ha->name_string, init_fw_cb->iscsi_name, min(sizeof(ha->name_string), sizeof(init_fw_cb->iscsi_name))); + ha->def_timeout = le16_to_cpu(init_fw_cb->def_timeout); /*memcpy(ha->alias, init_fw_cb->Alias, min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 30f31b127f33..95910c9b4776 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include @@ -31,6 +32,13 @@ static struct kmem_cache *srb_cachep; /* * Module parameter information and variables */ +int ql4xdisablesysfsboot = 1; +module_param(ql4xdisablesysfsboot, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ql4xdisablesysfsboot, + "Set to disable exporting boot targets to sysfs\n" + " 0 - Export boot targets\n" + " 1 - Do not export boot targets (Default)"); + int ql4xdontresethba = 0; module_param(ql4xdontresethba, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(ql4xdontresethba, @@ -63,7 +71,7 @@ static int ql4xsess_recovery_tmo = QL4_SESS_RECOVERY_TMO; module_param(ql4xsess_recovery_tmo, int, S_IRUGO); MODULE_PARM_DESC(ql4xsess_recovery_tmo, "Target Session Recovery Timeout.\n" - " Default: 30 sec."); + " Default: 120 sec."); static int qla4xxx_wait_for_hba_online(struct scsi_qla_host *ha); /* @@ -415,7 +423,7 @@ static int qla4xxx_ep_poll(struct iscsi_endpoint *ep, int timeout_ms) qla_ep = ep->dd_data; ha = to_qla_host(qla_ep->host); - if (adapter_up(ha)) + if (adapter_up(ha) && !test_bit(AF_BUILD_DDB_LIST, &ha->flags)) ret = 1; return ret; @@ -975,6 +983,150 @@ static int qla4xxx_conn_get_param(struct iscsi_cls_conn *cls_conn, } +int qla4xxx_get_ddb_index(struct scsi_qla_host *ha, uint16_t *ddb_index) +{ + uint32_t mbx_sts = 0; + uint16_t tmp_ddb_index; + int ret; + +get_ddb_index: + tmp_ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES); + + if (tmp_ddb_index >= MAX_DDB_ENTRIES) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Free DDB index not available\n")); + ret = QLA_ERROR; + goto exit_get_ddb_index; + } + + if (test_and_set_bit(tmp_ddb_index, ha->ddb_idx_map)) + goto get_ddb_index; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Found a free DDB index at %d\n", tmp_ddb_index)); + ret = qla4xxx_req_ddb_entry(ha, tmp_ddb_index, &mbx_sts); + if (ret == QLA_ERROR) { + if (mbx_sts == MBOX_STS_COMMAND_ERROR) { + ql4_printk(KERN_INFO, ha, + "DDB index = %d not available trying next\n", + tmp_ddb_index); + goto get_ddb_index; + } + DEBUG2(ql4_printk(KERN_INFO, ha, + "Free FW DDB not available\n")); + } + + *ddb_index = tmp_ddb_index; + +exit_get_ddb_index: + return ret; +} + +static int qla4xxx_match_ipaddress(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry, + char *existing_ipaddr, + char *user_ipaddr) +{ + uint8_t dst_ipaddr[IPv6_ADDR_LEN]; + char formatted_ipaddr[DDB_IPADDR_LEN]; + int status = QLA_SUCCESS, ret = 0; + + if (ddb_entry->fw_ddb_entry.options & DDB_OPT_IPV6_DEVICE) { + ret = in6_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, + '\0', NULL); + if (ret == 0) { + status = QLA_ERROR; + goto out_match; + } + ret = sprintf(formatted_ipaddr, "%pI6", dst_ipaddr); + } else { + ret = in4_pton(user_ipaddr, strlen(user_ipaddr), dst_ipaddr, + '\0', NULL); + if (ret == 0) { + status = QLA_ERROR; + goto out_match; + } + ret = sprintf(formatted_ipaddr, "%pI4", dst_ipaddr); + } + + if (strcmp(existing_ipaddr, formatted_ipaddr)) + status = QLA_ERROR; + +out_match: + return status; +} + +static int qla4xxx_match_fwdb_session(struct scsi_qla_host *ha, + struct iscsi_cls_conn *cls_conn) +{ + int idx = 0, max_ddbs, rval; + struct iscsi_cls_session *cls_sess = iscsi_conn_to_session(cls_conn); + struct iscsi_session *sess, *existing_sess; + struct iscsi_conn *conn, *existing_conn; + struct ddb_entry *ddb_entry; + + sess = cls_sess->dd_data; + conn = cls_conn->dd_data; + + if (sess->targetname == NULL || + conn->persistent_address == NULL || + conn->persistent_port == 0) + return QLA_ERROR; + + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + for (idx = 0; idx < max_ddbs; idx++) { + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if (ddb_entry == NULL) + continue; + + if (ddb_entry->ddb_type != FLASH_DDB) + continue; + + existing_sess = ddb_entry->sess->dd_data; + existing_conn = ddb_entry->conn->dd_data; + + if (existing_sess->targetname == NULL || + existing_conn->persistent_address == NULL || + existing_conn->persistent_port == 0) + continue; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "IQN = %s User IQN = %s\n", + existing_sess->targetname, + sess->targetname)); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "IP = %s User IP = %s\n", + existing_conn->persistent_address, + conn->persistent_address)); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Port = %d User Port = %d\n", + existing_conn->persistent_port, + conn->persistent_port)); + + if (strcmp(existing_sess->targetname, sess->targetname)) + continue; + rval = qla4xxx_match_ipaddress(ha, ddb_entry, + existing_conn->persistent_address, + conn->persistent_address); + if (rval == QLA_ERROR) + continue; + if (existing_conn->persistent_port != conn->persistent_port) + continue; + break; + } + + if (idx == max_ddbs) + return QLA_ERROR; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Match found in fwdb sessions\n")); + return QLA_SUCCESS; +} + static struct iscsi_cls_session * qla4xxx_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max, uint16_t qdepth, @@ -984,8 +1136,7 @@ qla4xxx_session_create(struct iscsi_endpoint *ep, struct scsi_qla_host *ha; struct qla_endpoint *qla_ep; struct ddb_entry *ddb_entry; - uint32_t ddb_index; - uint32_t mbx_sts = 0; + uint16_t ddb_index; struct iscsi_session *sess; struct sockaddr *dst_addr; int ret; @@ -1000,32 +1151,9 @@ qla4xxx_session_create(struct iscsi_endpoint *ep, dst_addr = (struct sockaddr *)&qla_ep->dst_addr; ha = to_qla_host(qla_ep->host); -get_ddb_index: - ddb_index = find_first_zero_bit(ha->ddb_idx_map, MAX_DDB_ENTRIES); - - if (ddb_index >= MAX_DDB_ENTRIES) { - DEBUG2(ql4_printk(KERN_INFO, ha, - "Free DDB index not available\n")); + ret = qla4xxx_get_ddb_index(ha, &ddb_index); + if (ret == QLA_ERROR) return NULL; - } - - if (test_and_set_bit(ddb_index, ha->ddb_idx_map)) - goto get_ddb_index; - - DEBUG2(ql4_printk(KERN_INFO, ha, - "Found a free DDB index at %d\n", ddb_index)); - ret = qla4xxx_req_ddb_entry(ha, ddb_index, &mbx_sts); - if (ret == QLA_ERROR) { - if (mbx_sts == MBOX_STS_COMMAND_ERROR) { - ql4_printk(KERN_INFO, ha, - "DDB index = %d not available trying next\n", - ddb_index); - goto get_ddb_index; - } - DEBUG2(ql4_printk(KERN_INFO, ha, - "Free FW DDB not available\n")); - return NULL; - } cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, qla_ep->host, cmds_max, sizeof(struct ddb_entry), @@ -1040,6 +1168,8 @@ get_ddb_index: ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; ddb_entry->ha = ha; ddb_entry->sess = cls_sess; + ddb_entry->unblock_sess = qla4xxx_unblock_ddb; + ddb_entry->ddb_change = qla4xxx_ddb_change; cls_sess->recovery_tmo = ql4xsess_recovery_tmo; ha->fw_ddb_index_map[ddb_entry->fw_ddb_index] = ddb_entry; ha->tot_ddbs++; @@ -1109,7 +1239,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) struct iscsi_session *sess; struct ddb_entry *ddb_entry; struct scsi_qla_host *ha; - struct dev_db_entry *fw_ddb_entry; + struct dev_db_entry *fw_ddb_entry = NULL; dma_addr_t fw_ddb_entry_dma; uint32_t mbx_sts = 0; int ret = 0; @@ -1120,12 +1250,25 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) ddb_entry = sess->dd_data; ha = ddb_entry->ha; + /* Check if we have matching FW DDB, if yes then do not + * login to this target. This could cause target to logout previous + * connection + */ + ret = qla4xxx_match_fwdb_session(ha, cls_conn); + if (ret == QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, + "Session already exist in FW.\n"); + ret = -EEXIST; + goto exit_conn_start; + } + fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), &fw_ddb_entry_dma, GFP_KERNEL); if (!fw_ddb_entry) { ql4_printk(KERN_ERR, ha, "%s: Unable to allocate dma buffer\n", __func__); - return -ENOMEM; + ret = -ENOMEM; + goto exit_conn_start; } ret = qla4xxx_set_param_ddbentry(ha, ddb_entry, cls_conn, &mbx_sts); @@ -1138,9 +1281,7 @@ static int qla4xxx_conn_start(struct iscsi_cls_conn *cls_conn) if (mbx_sts) if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { - iscsi_conn_start(ddb_entry->conn); - iscsi_conn_login_event(ddb_entry->conn, - ISCSI_CONN_STATE_LOGGED_IN); + ddb_entry->unblock_sess(ddb_entry->sess); goto exit_set_param; } @@ -1167,8 +1308,9 @@ exit_set_param: ret = 0; exit_conn_start: - dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), - fw_ddb_entry, fw_ddb_entry_dma); + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); return ret; } @@ -1344,6 +1486,101 @@ static int qla4xxx_task_xmit(struct iscsi_task *task) return -ENOSYS; } +static void qla4xxx_copy_fwddb_param(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry, + struct iscsi_cls_session *cls_sess, + struct iscsi_cls_conn *cls_conn) +{ + int buflen = 0; + struct iscsi_session *sess; + struct iscsi_conn *conn; + char ip_addr[DDB_IPADDR_LEN]; + uint16_t options = 0; + + sess = cls_sess->dd_data; + conn = cls_conn->dd_data; + + conn->max_recv_dlength = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); + + conn->max_xmit_dlength = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_snd_data_seg_len); + + sess->initial_r2t_en = + (BIT_10 & le16_to_cpu(fw_ddb_entry->iscsi_options)); + + sess->max_r2t = le16_to_cpu(fw_ddb_entry->iscsi_max_outsnd_r2t); + + sess->imm_data_en = (BIT_11 & le16_to_cpu(fw_ddb_entry->iscsi_options)); + + sess->first_burst = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_first_burst_len); + + sess->max_burst = BYTE_UNITS * + le16_to_cpu(fw_ddb_entry->iscsi_max_burst_len); + + sess->time2wait = le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); + + sess->time2retain = le16_to_cpu(fw_ddb_entry->iscsi_def_time2retain); + + conn->persistent_port = le16_to_cpu(fw_ddb_entry->port); + + sess->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + + options = le16_to_cpu(fw_ddb_entry->options); + if (options & DDB_OPT_IPV6_DEVICE) + sprintf(ip_addr, "%pI6", fw_ddb_entry->ip_addr); + else + sprintf(ip_addr, "%pI4", fw_ddb_entry->ip_addr); + + iscsi_set_param(cls_conn, ISCSI_PARAM_TARGET_NAME, + (char *)fw_ddb_entry->iscsi_name, buflen); + iscsi_set_param(cls_conn, ISCSI_PARAM_INITIATOR_NAME, + (char *)ha->name_string, buflen); + iscsi_set_param(cls_conn, ISCSI_PARAM_PERSISTENT_ADDRESS, + (char *)ip_addr, buflen); +} + +void qla4xxx_update_session_conn_fwddb_param(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) +{ + struct iscsi_cls_session *cls_sess; + struct iscsi_cls_conn *cls_conn; + uint32_t ddb_state; + dma_addr_t fw_ddb_entry_dma; + struct dev_db_entry *fw_ddb_entry; + + fw_ddb_entry = dma_alloc_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + &fw_ddb_entry_dma, GFP_KERNEL); + if (!fw_ddb_entry) { + ql4_printk(KERN_ERR, ha, + "%s: Unable to allocate dma buffer\n", __func__); + goto exit_session_conn_fwddb_param; + } + + if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, + fw_ddb_entry_dma, NULL, NULL, &ddb_state, + NULL, NULL, NULL) == QLA_ERROR) { + DEBUG2(ql4_printk(KERN_ERR, ha, "scsi%ld: %s: failed " + "get_ddb_entry for fw_ddb_index %d\n", + ha->host_no, __func__, + ddb_entry->fw_ddb_index)); + goto exit_session_conn_fwddb_param; + } + + cls_sess = ddb_entry->sess; + + cls_conn = ddb_entry->conn; + + /* Update params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, cls_conn); + +exit_session_conn_fwddb_param: + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); +} + void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, struct ddb_entry *ddb_entry) { @@ -1360,7 +1597,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, if (!fw_ddb_entry) { ql4_printk(KERN_ERR, ha, "%s: Unable to allocate dma buffer\n", __func__); - return; + goto exit_session_conn_param; } if (qla4xxx_get_fwddb_entry(ha, ddb_entry->fw_ddb_index, fw_ddb_entry, @@ -1370,7 +1607,7 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, "get_ddb_entry for fw_ddb_index %d\n", ha->host_no, __func__, ddb_entry->fw_ddb_index)); - return; + goto exit_session_conn_param; } cls_sess = ddb_entry->sess; @@ -1379,6 +1616,12 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, cls_conn = ddb_entry->conn; conn = cls_conn->dd_data; + /* Update timers after login */ + ddb_entry->default_relogin_timeout = + le16_to_cpu(fw_ddb_entry->def_timeout); + ddb_entry->default_time2wait = + le16_to_cpu(fw_ddb_entry->iscsi_def_time2wait); + /* Update params */ conn->max_recv_dlength = BYTE_UNITS * le16_to_cpu(fw_ddb_entry->iscsi_max_rcv_data_seg_len); @@ -1407,6 +1650,11 @@ void qla4xxx_update_session_conn_param(struct scsi_qla_host *ha, memcpy(sess->initiatorname, ha->name_string, min(sizeof(ha->name_string), sizeof(sess->initiatorname))); + +exit_session_conn_param: + if (fw_ddb_entry) + dma_free_coherent(&ha->pdev->dev, sizeof(*fw_ddb_entry), + fw_ddb_entry, fw_ddb_entry_dma); } /* @@ -1607,6 +1855,9 @@ static void qla4xxx_mem_free(struct scsi_qla_host *ha) vfree(ha->chap_list); ha->chap_list = NULL; + if (ha->fw_ddb_dma_pool) + dma_pool_destroy(ha->fw_ddb_dma_pool); + /* release io space registers */ if (is_qla8022(ha)) { if (ha->nx_pcibase) @@ -1689,6 +1940,16 @@ static int qla4xxx_mem_alloc(struct scsi_qla_host *ha) goto mem_alloc_error_exit; } + ha->fw_ddb_dma_pool = dma_pool_create("ql4_fw_ddb", &ha->pdev->dev, + DDB_DMA_BLOCK_SIZE, 8, 0); + + if (ha->fw_ddb_dma_pool == NULL) { + ql4_printk(KERN_WARNING, ha, + "%s: fw_ddb_dma_pool allocation failed..\n", + __func__); + goto mem_alloc_error_exit; + } + return QLA_SUCCESS; mem_alloc_error_exit: @@ -1800,6 +2061,60 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) } } +void qla4xxx_check_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!(ddb_entry->ddb_type == FLASH_DDB)) + return; + + if (adapter_up(ha) && !test_bit(DF_RELOGIN, &ddb_entry->flags) && + !iscsi_is_session_online(cls_sess)) { + if (atomic_read(&ddb_entry->retry_relogin_timer) != + INVALID_ENTRY) { + if (atomic_read(&ddb_entry->retry_relogin_timer) == + 0) { + atomic_set(&ddb_entry->retry_relogin_timer, + INVALID_ENTRY); + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: index [%d] login device\n", + __func__, ddb_entry->fw_ddb_index)); + } else + atomic_dec(&ddb_entry->retry_relogin_timer); + } + } + + /* Wait for relogin to timeout */ + if (atomic_read(&ddb_entry->relogin_timer) && + (atomic_dec_and_test(&ddb_entry->relogin_timer) != 0)) { + /* + * If the relogin times out and the device is + * still NOT ONLINE then try and relogin again. + */ + if (!iscsi_is_session_online(cls_sess)) { + /* Reset retry relogin timer */ + atomic_inc(&ddb_entry->relogin_retry_count); + DEBUG2(ql4_printk(KERN_INFO, ha, + "%s: index[%d] relogin timed out-retrying" + " relogin (%d), retry (%d)\n", __func__, + ddb_entry->fw_ddb_index, + atomic_read(&ddb_entry->relogin_retry_count), + ddb_entry->default_time2wait + 4)); + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + atomic_set(&ddb_entry->retry_relogin_timer, + ddb_entry->default_time2wait + 4); + } + } +} + /** * qla4xxx_timer - checks every second for work to do. * @ha: Pointer to host adapter structure. @@ -1809,6 +2124,8 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) int start_dpc = 0; uint16_t w; + iscsi_host_for_each_session(ha->host, qla4xxx_check_relogin_flash_ddb); + /* If we are in the middle of AER/EEH processing * skip any processing and reschedule the timer */ @@ -2078,7 +2395,12 @@ static void qla4xxx_fail_session(struct iscsi_cls_session *cls_session) sess = cls_session->dd_data; ddb_entry = sess->dd_data; ddb_entry->fw_ddb_device_state = DDB_DS_SESSION_FAILED; - iscsi_session_failure(cls_session->dd_data, ISCSI_ERR_CONN_FAILED); + + if (ddb_entry->ddb_type == FLASH_DDB) + iscsi_block_session(ddb_entry->sess); + else + iscsi_session_failure(cls_session->dd_data, + ISCSI_ERR_CONN_FAILED); } /** @@ -2163,7 +2485,7 @@ recover_ha_init_adapter: /* NOTE: AF_ONLINE flag set upon successful completion of * qla4xxx_initialize_adapter */ - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); } /* Retry failed adapter initialization, if necessary @@ -2245,17 +2567,108 @@ static void qla4xxx_relogin_devices(struct iscsi_cls_session *cls_session) iscsi_unblock_session(ddb_entry->sess); } else { /* Trigger relogin */ - iscsi_session_failure(cls_session->dd_data, - ISCSI_ERR_CONN_FAILED); + if (ddb_entry->ddb_type == FLASH_DDB) { + if (!test_bit(DF_RELOGIN, &ddb_entry->flags)) + qla4xxx_arm_relogin_timer(ddb_entry); + } else + iscsi_session_failure(cls_session->dd_data, + ISCSI_ERR_CONN_FAILED); } } } +int qla4xxx_unblock_flash_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " unblock session\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + + iscsi_unblock_session(ddb_entry->sess); + + /* Start scan target */ + if (test_bit(AF_ONLINE, &ha->flags)) { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " start scan\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + scsi_queue_work(ha->host, &ddb_entry->sess->scan_work); + } + return QLA_SUCCESS; +} + +int qla4xxx_unblock_ddb(struct iscsi_cls_session *cls_session) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_session->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: ddb[%d]" + " unblock user space session\n", ha->host_no, __func__, + ddb_entry->fw_ddb_index); + iscsi_conn_start(ddb_entry->conn); + iscsi_conn_login_event(ddb_entry->conn, + ISCSI_CONN_STATE_LOGGED_IN); + + return QLA_SUCCESS; +} + static void qla4xxx_relogin_all_devices(struct scsi_qla_host *ha) { iscsi_host_for_each_session(ha->host, qla4xxx_relogin_devices); } +static void qla4xxx_relogin_flash_ddb(struct iscsi_cls_session *cls_sess) +{ + uint16_t relogin_timer; + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + relogin_timer = max(ddb_entry->default_relogin_timeout, + (uint16_t)RELOGIN_TOV); + atomic_set(&ddb_entry->relogin_timer, relogin_timer); + + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: Relogin index [%d]. TOV=%d\n", ha->host_no, + ddb_entry->fw_ddb_index, relogin_timer)); + + qla4xxx_login_flash_ddb(cls_sess); +} + +static void qla4xxx_dpc_relogin(struct iscsi_cls_session *cls_sess) +{ + struct iscsi_session *sess; + struct ddb_entry *ddb_entry; + struct scsi_qla_host *ha; + + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ha = ddb_entry->ha; + + if (!(ddb_entry->ddb_type == FLASH_DDB)) + return; + + if (test_and_clear_bit(DF_RELOGIN, &ddb_entry->flags) && + !iscsi_is_session_online(cls_sess)) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "relogin issued\n")); + qla4xxx_relogin_flash_ddb(cls_sess); + } +} + void qla4xxx_wake_dpc(struct scsi_qla_host *ha) { if (ha->dpc_thread) @@ -2356,6 +2769,12 @@ dpc_post_reset_ha: if (test_and_clear_bit(DPC_GET_DHCP_IP_ADDR, &ha->dpc_flags)) qla4xxx_get_dhcp_ip_address(ha); + /* ---- relogin device? --- */ + if (adapter_up(ha) && + test_and_clear_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags)) { + iscsi_host_for_each_session(ha->host, qla4xxx_dpc_relogin); + } + /* ---- link change? --- */ if (test_and_clear_bit(DPC_LINK_CHANGED, &ha->dpc_flags)) { if (!test_bit(AF_LINK_UP, &ha->flags)) { @@ -2368,8 +2787,12 @@ dpc_post_reset_ha: * fatal error recovery. Therefore, the driver must * manually relogin to devices when recovering from * connection failures, logouts, expired KATO, etc. */ - - qla4xxx_relogin_all_devices(ha); + if (test_and_clear_bit(AF_BUILD_DDB_LIST, &ha->flags)) { + qla4xxx_build_ddb_list(ha, ha->is_reset); + iscsi_host_for_each_session(ha->host, + qla4xxx_login_flash_ddb); + } else + qla4xxx_relogin_all_devices(ha); } } } @@ -2867,6 +3290,9 @@ static int get_fw_boot_info(struct scsi_qla_host *ha, uint16_t ddb_index[]) " target ID %d\n", __func__, ddb_index[0], ddb_index[1])); + ha->pri_ddb_idx = ddb_index[0]; + ha->sec_ddb_idx = ddb_index[1]; + exit_boot_info_free: dma_free_coherent(&ha->pdev->dev, size, buf, buf_dma); exit_boot_info: @@ -3034,6 +3460,9 @@ static int qla4xxx_get_boot_info(struct scsi_qla_host *ha) return ret; } + if (ql4xdisablesysfsboot) + return QLA_SUCCESS; + if (ddb_index[0] == 0xffff) goto sec_target; @@ -3066,7 +3495,15 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) struct iscsi_boot_kobj *boot_kobj; if (qla4xxx_get_boot_info(ha) != QLA_SUCCESS) - return 0; + return QLA_ERROR; + + if (ql4xdisablesysfsboot) { + ql4_printk(KERN_INFO, ha, + "%s: syfsboot disabled - driver will trigger login" + "and publish session for discovery .\n", __func__); + return QLA_SUCCESS; + } + ha->boot_kset = iscsi_boot_create_host_kset(ha->host->host_no); if (!ha->boot_kset) @@ -3108,7 +3545,7 @@ static int qla4xxx_setup_boot_info(struct scsi_qla_host *ha) if (!boot_kobj) goto put_host; - return 0; + return QLA_SUCCESS; put_host: scsi_host_put(ha->host); @@ -3174,9 +3611,507 @@ static void qla4xxx_create_chap_list(struct scsi_qla_host *ha) exit_chap_list: dma_free_coherent(&ha->pdev->dev, chap_size, chap_flash_data, chap_dma); - return; } +static void qla4xxx_get_param_ddb(struct ddb_entry *ddb_entry, + struct ql4_tuple_ddb *tddb) +{ + struct scsi_qla_host *ha; + struct iscsi_cls_session *cls_sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_session *sess; + struct iscsi_conn *conn; + + DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); + ha = ddb_entry->ha; + cls_sess = ddb_entry->sess; + sess = cls_sess->dd_data; + cls_conn = ddb_entry->conn; + conn = cls_conn->dd_data; + + tddb->tpgt = sess->tpgt; + tddb->port = conn->persistent_port; + strncpy(tddb->iscsi_name, sess->targetname, ISCSI_NAME_SIZE); + strncpy(tddb->ip_addr, conn->persistent_address, DDB_IPADDR_LEN); +} + +static void qla4xxx_convert_param_ddb(struct dev_db_entry *fw_ddb_entry, + struct ql4_tuple_ddb *tddb) +{ + uint16_t options = 0; + + tddb->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(&tddb->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], + min(sizeof(tddb->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); + + options = le16_to_cpu(fw_ddb_entry->options); + if (options & DDB_OPT_IPV6_DEVICE) + sprintf(tddb->ip_addr, "%pI6", fw_ddb_entry->ip_addr); + else + sprintf(tddb->ip_addr, "%pI4", fw_ddb_entry->ip_addr); + + tddb->port = le16_to_cpu(fw_ddb_entry->port); +} + +static int qla4xxx_compare_tuple_ddb(struct scsi_qla_host *ha, + struct ql4_tuple_ddb *old_tddb, + struct ql4_tuple_ddb *new_tddb) +{ + if (strcmp(old_tddb->iscsi_name, new_tddb->iscsi_name)) + return QLA_ERROR; + + if (strcmp(old_tddb->ip_addr, new_tddb->ip_addr)) + return QLA_ERROR; + + if (old_tddb->port != new_tddb->port) + return QLA_ERROR; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Match Found, fw[%d,%d,%s,%s], [%d,%d,%s,%s]", + old_tddb->port, old_tddb->tpgt, old_tddb->ip_addr, + old_tddb->iscsi_name, new_tddb->port, new_tddb->tpgt, + new_tddb->ip_addr, new_tddb->iscsi_name)); + + return QLA_SUCCESS; +} + +static int qla4xxx_is_session_exists(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry) +{ + struct ddb_entry *ddb_entry; + struct ql4_tuple_ddb *fw_tddb = NULL; + struct ql4_tuple_ddb *tmp_tddb = NULL; + int idx; + int ret = QLA_ERROR; + + fw_tddb = vzalloc(sizeof(*fw_tddb)); + if (!fw_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + tmp_tddb = vzalloc(sizeof(*tmp_tddb)); + if (!tmp_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); + + for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if (ddb_entry == NULL) + continue; + + qla4xxx_get_param_ddb(ddb_entry, tmp_tddb); + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + ret = QLA_SUCCESS; /* found */ + goto exit_check; + } + } + +exit_check: + if (fw_tddb) + vfree(fw_tddb); + if (tmp_tddb) + vfree(tmp_tddb); + return ret; +} + +static int qla4xxx_is_flash_ddb_exists(struct scsi_qla_host *ha, + struct list_head *list_nt, + struct dev_db_entry *fw_ddb_entry) +{ + struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + struct ql4_tuple_ddb *fw_tddb = NULL; + struct ql4_tuple_ddb *tmp_tddb = NULL; + int ret = QLA_ERROR; + + fw_tddb = vzalloc(sizeof(*fw_tddb)); + if (!fw_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + tmp_tddb = vzalloc(sizeof(*tmp_tddb)); + if (!tmp_tddb) { + DEBUG2(ql4_printk(KERN_WARNING, ha, + "Memory Allocation failed.\n")); + ret = QLA_SUCCESS; + goto exit_check; + } + + qla4xxx_convert_param_ddb(fw_ddb_entry, fw_tddb); + + list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { + qla4xxx_convert_param_ddb(&nt_ddb_idx->fw_ddb, tmp_tddb); + if (!qla4xxx_compare_tuple_ddb(ha, fw_tddb, tmp_tddb)) { + ret = QLA_SUCCESS; /* found */ + goto exit_check; + } + } + +exit_check: + if (fw_tddb) + vfree(fw_tddb); + if (tmp_tddb) + vfree(tmp_tddb); + return ret; +} + +static void qla4xxx_free_nt_list(struct list_head *list_nt) +{ + struct qla_ddb_index *nt_ddb_idx, *nt_ddb_idx_tmp; + + /* Free up the normaltargets list */ + list_for_each_entry_safe(nt_ddb_idx, nt_ddb_idx_tmp, list_nt, list) { + list_del_init(&nt_ddb_idx->list); + vfree(nt_ddb_idx); + } + +} + +static struct iscsi_endpoint *qla4xxx_get_ep_fwdb(struct scsi_qla_host *ha, + struct dev_db_entry *fw_ddb_entry) +{ + struct iscsi_endpoint *ep; + struct sockaddr_in *addr; + struct sockaddr_in6 *addr6; + struct sockaddr *dst_addr; + char *ip; + + /* TODO: need to destroy on unload iscsi_endpoint*/ + dst_addr = vmalloc(sizeof(*dst_addr)); + if (!dst_addr) + return NULL; + + if (fw_ddb_entry->options & DDB_OPT_IPV6_DEVICE) { + dst_addr->sa_family = AF_INET6; + addr6 = (struct sockaddr_in6 *)dst_addr; + ip = (char *)&addr6->sin6_addr; + memcpy(ip, fw_ddb_entry->ip_addr, IPv6_ADDR_LEN); + addr6->sin6_port = htons(le16_to_cpu(fw_ddb_entry->port)); + + } else { + dst_addr->sa_family = AF_INET; + addr = (struct sockaddr_in *)dst_addr; + ip = (char *)&addr->sin_addr; + memcpy(ip, fw_ddb_entry->ip_addr, IP_ADDR_LEN); + addr->sin_port = htons(le16_to_cpu(fw_ddb_entry->port)); + } + + ep = qla4xxx_ep_connect(ha->host, dst_addr, 0); + vfree(dst_addr); + return ep; +} + +static int qla4xxx_verify_boot_idx(struct scsi_qla_host *ha, uint16_t idx) +{ + if (ql4xdisablesysfsboot) + return QLA_SUCCESS; + if (idx == ha->pri_ddb_idx || idx == ha->sec_ddb_idx) + return QLA_ERROR; + return QLA_SUCCESS; +} + +static void qla4xxx_setup_flash_ddb_entry(struct scsi_qla_host *ha, + struct ddb_entry *ddb_entry) +{ + ddb_entry->ddb_type = FLASH_DDB; + ddb_entry->fw_ddb_index = INVALID_ENTRY; + ddb_entry->fw_ddb_device_state = DDB_DS_NO_CONNECTION_ACTIVE; + ddb_entry->ha = ha; + ddb_entry->unblock_sess = qla4xxx_unblock_flash_ddb; + ddb_entry->ddb_change = qla4xxx_flash_ddb_change; + + atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); + atomic_set(&ddb_entry->relogin_timer, 0); + atomic_set(&ddb_entry->relogin_retry_count, 0); + + ddb_entry->default_relogin_timeout = + le16_to_cpu(ddb_entry->fw_ddb_entry.def_timeout); + ddb_entry->default_time2wait = + le16_to_cpu(ddb_entry->fw_ddb_entry.iscsi_def_time2wait); +} + +static void qla4xxx_wait_for_ip_configuration(struct scsi_qla_host *ha) +{ + uint32_t idx = 0; + uint32_t ip_idx[IP_ADDR_COUNT] = {0, 1, 2, 3}; /* 4 IP interfaces */ + uint32_t sts[MBOX_REG_COUNT]; + uint32_t ip_state; + unsigned long wtime; + int ret; + + wtime = jiffies + (HZ * IP_CONFIG_TOV); + do { + for (idx = 0; idx < IP_ADDR_COUNT; idx++) { + if (ip_idx[idx] == -1) + continue; + + ret = qla4xxx_get_ip_state(ha, 0, ip_idx[idx], sts); + + if (ret == QLA_ERROR) { + ip_idx[idx] = -1; + continue; + } + + ip_state = (sts[1] & IP_STATE_MASK) >> IP_STATE_SHIFT; + + DEBUG2(ql4_printk(KERN_INFO, ha, + "Waiting for IP state for idx = %d, state = 0x%x\n", + ip_idx[idx], ip_state)); + if (ip_state == IP_ADDRSTATE_UNCONFIGURED || + ip_state == IP_ADDRSTATE_INVALID || + ip_state == IP_ADDRSTATE_PREFERRED || + ip_state == IP_ADDRSTATE_DEPRICATED || + ip_state == IP_ADDRSTATE_DISABLING) + ip_idx[idx] = -1; + + } + + /* Break if all IP states checked */ + if ((ip_idx[0] == -1) && + (ip_idx[1] == -1) && + (ip_idx[2] == -1) && + (ip_idx[3] == -1)) + break; + schedule_timeout_uninterruptible(HZ); + } while (time_after(wtime, jiffies)); +} + +void qla4xxx_build_ddb_list(struct scsi_qla_host *ha, int is_reset) +{ + int max_ddbs; + int ret; + uint32_t idx = 0, next_idx = 0; + uint32_t state = 0, conn_err = 0; + uint16_t conn_id; + struct dev_db_entry *fw_ddb_entry; + struct ddb_entry *ddb_entry = NULL; + dma_addr_t fw_ddb_dma; + struct iscsi_cls_session *cls_sess; + struct iscsi_session *sess; + struct iscsi_cls_conn *cls_conn; + struct iscsi_endpoint *ep; + uint16_t cmds_max = 32, tmo = 0; + uint32_t initial_cmdsn = 0; + struct list_head list_st, list_nt; /* List of sendtargets */ + struct qla_ddb_index *st_ddb_idx, *st_ddb_idx_tmp; + int fw_idx_size; + unsigned long wtime; + struct qla_ddb_index *nt_ddb_idx; + + if (!test_bit(AF_LINK_UP, &ha->flags)) { + set_bit(AF_BUILD_DDB_LIST, &ha->flags); + ha->is_reset = is_reset; + return; + } + max_ddbs = is_qla40XX(ha) ? MAX_DEV_DB_ENTRIES_40XX : + MAX_DEV_DB_ENTRIES; + + fw_ddb_entry = dma_pool_alloc(ha->fw_ddb_dma_pool, GFP_KERNEL, + &fw_ddb_dma); + if (fw_ddb_entry == NULL) { + DEBUG2(ql4_printk(KERN_ERR, ha, "Out of memory\n")); + goto exit_ddb_list; + } + + INIT_LIST_HEAD(&list_st); + INIT_LIST_HEAD(&list_nt); + fw_idx_size = sizeof(struct qla_ddb_index); + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, + fw_ddb_dma, NULL, + &next_idx, &state, &conn_err, + NULL, &conn_id); + if (ret == QLA_ERROR) + break; + + if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) + goto continue_next_st; + + /* Check if ST, add to the list_st */ + if (strlen((char *) fw_ddb_entry->iscsi_name) != 0) + goto continue_next_st; + + st_ddb_idx = vzalloc(fw_idx_size); + if (!st_ddb_idx) + break; + + st_ddb_idx->fw_ddb_idx = idx; + + list_add_tail(&st_ddb_idx->list, &list_st); +continue_next_st: + if (next_idx == 0) + break; + } + + /* Before issuing conn open mbox, ensure all IPs states are configured + * Note, conn open fails if IPs are not configured + */ + qla4xxx_wait_for_ip_configuration(ha); + + /* Go thru the STs and fire the sendtargets by issuing conn open mbx */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + qla4xxx_conn_open(ha, st_ddb_idx->fw_ddb_idx); + } + + /* Wait to ensure all sendtargets are done for min 12 sec wait */ + tmo = ((ha->def_timeout < LOGIN_TOV) ? LOGIN_TOV : ha->def_timeout); + DEBUG2(ql4_printk(KERN_INFO, ha, + "Default time to wait for build ddb %d\n", tmo)); + + wtime = jiffies + (HZ * tmo); + do { + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, + list) { + ret = qla4xxx_get_fwddb_entry(ha, + st_ddb_idx->fw_ddb_idx, + NULL, 0, NULL, &next_idx, + &state, &conn_err, NULL, + NULL); + if (ret == QLA_ERROR) + continue; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + list_del_init(&st_ddb_idx->list); + vfree(st_ddb_idx); + } + } + schedule_timeout_uninterruptible(HZ / 10); + } while (time_after(wtime, jiffies)); + + /* Free up the sendtargets list */ + list_for_each_entry_safe(st_ddb_idx, st_ddb_idx_tmp, &list_st, list) { + list_del_init(&st_ddb_idx->list); + vfree(st_ddb_idx); + } + + for (idx = 0; idx < max_ddbs; idx = next_idx) { + ret = qla4xxx_get_fwddb_entry(ha, idx, fw_ddb_entry, + fw_ddb_dma, NULL, + &next_idx, &state, &conn_err, + NULL, &conn_id); + if (ret == QLA_ERROR) + break; + + if (qla4xxx_verify_boot_idx(ha, idx) != QLA_SUCCESS) + goto continue_next_nt; + + /* Check if NT, then add to list it */ + if (strlen((char *) fw_ddb_entry->iscsi_name) == 0) + goto continue_next_nt; + + if (state == DDB_DS_NO_CONNECTION_ACTIVE || + state == DDB_DS_SESSION_FAILED) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "Adding DDB to session = 0x%x\n", + idx)); + if (is_reset == INIT_ADAPTER) { + nt_ddb_idx = vmalloc(fw_idx_size); + if (!nt_ddb_idx) + break; + + nt_ddb_idx->fw_ddb_idx = idx; + + memcpy(&nt_ddb_idx->fw_ddb, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + if (qla4xxx_is_flash_ddb_exists(ha, &list_nt, + fw_ddb_entry) == QLA_SUCCESS) { + vfree(nt_ddb_idx); + goto continue_next_nt; + } + list_add_tail(&nt_ddb_idx->list, &list_nt); + } else if (is_reset == RESET_ADAPTER) { + if (qla4xxx_is_session_exists(ha, + fw_ddb_entry) == QLA_SUCCESS) + goto continue_next_nt; + } + + /* Create session object, with INVALID_ENTRY, + * the targer_id would get set when we issue the login + */ + cls_sess = iscsi_session_setup(&qla4xxx_iscsi_transport, + ha->host, cmds_max, + sizeof(struct ddb_entry), + sizeof(struct ql4_task_data), + initial_cmdsn, INVALID_ENTRY); + if (!cls_sess) + goto exit_ddb_list; + + /* + * iscsi_session_setup increments the driver reference + * count which wouldn't let the driver to be unloaded. + * so calling module_put function to decrement the + * reference count. + **/ + module_put(qla4xxx_iscsi_transport.owner); + sess = cls_sess->dd_data; + ddb_entry = sess->dd_data; + ddb_entry->sess = cls_sess; + + cls_sess->recovery_tmo = ql4xsess_recovery_tmo; + memcpy(&ddb_entry->fw_ddb_entry, fw_ddb_entry, + sizeof(struct dev_db_entry)); + + qla4xxx_setup_flash_ddb_entry(ha, ddb_entry); + + cls_conn = iscsi_conn_setup(cls_sess, + sizeof(struct qla_conn), + conn_id); + if (!cls_conn) + goto exit_ddb_list; + + ddb_entry->conn = cls_conn; + + /* Setup ep, for displaying attributes in sysfs */ + ep = qla4xxx_get_ep_fwdb(ha, fw_ddb_entry); + if (ep) { + ep->conn = cls_conn; + cls_conn->ep = ep; + } else { + DEBUG2(ql4_printk(KERN_ERR, ha, + "Unable to get ep\n")); + } + + /* Update sess/conn params */ + qla4xxx_copy_fwddb_param(ha, fw_ddb_entry, cls_sess, + cls_conn); + + if (is_reset == RESET_ADAPTER) { + iscsi_block_session(cls_sess); + /* Use the relogin path to discover new devices + * by short-circuting the logic of setting + * timer to relogin - instead set the flags + * to initiate login right away. + */ + set_bit(DPC_RELOGIN_DEVICE, &ha->dpc_flags); + set_bit(DF_RELOGIN, &ddb_entry->flags); + } + } +continue_next_nt: + if (next_idx == 0) + break; + } +exit_ddb_list: + qla4xxx_free_nt_list(&list_nt); + if (fw_ddb_entry) + dma_pool_free(ha->fw_ddb_dma_pool, fw_ddb_entry, fw_ddb_dma); + + qla4xxx_free_ddb_index(ha); +} + + /** * qla4xxx_probe_adapter - callback function to probe HBA * @pdev: pointer to pci_dev structure @@ -3298,7 +4233,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, * firmware * NOTE: interrupts enabled upon successful completion */ - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); while ((!test_bit(AF_ONLINE, &ha->flags)) && init_retry_count++ < MAX_INIT_RETRIES) { @@ -3319,7 +4254,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, if (ha->isp_ops->reset_chip(ha) == QLA_ERROR) continue; - status = qla4xxx_initialize_adapter(ha); + status = qla4xxx_initialize_adapter(ha, INIT_ADAPTER); } if (!test_bit(AF_ONLINE, &ha->flags)) { @@ -3386,12 +4321,16 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->host_no, ha->firmware_version[0], ha->firmware_version[1], ha->patch_number, ha->build_number); - qla4xxx_create_chap_list(ha); - if (qla4xxx_setup_boot_info(ha)) ql4_printk(KERN_ERR, ha, "%s:ISCSI boot info setup failed\n", __func__); + /* Perform the build ddb list and login to each */ + qla4xxx_build_ddb_list(ha, INIT_ADAPTER); + iscsi_host_for_each_session(ha->host, qla4xxx_login_flash_ddb); + + qla4xxx_create_chap_list(ha); + qla4xxx_create_ifaces(ha); return 0; @@ -3449,6 +4388,38 @@ static void qla4xxx_prevent_other_port_reinit(struct scsi_qla_host *ha) } } +static void qla4xxx_destroy_fw_ddb_session(struct scsi_qla_host *ha) +{ + struct ddb_entry *ddb_entry; + int options; + int idx; + + for (idx = 0; idx < MAX_DDB_ENTRIES; idx++) { + + ddb_entry = qla4xxx_lookup_ddb_by_fw_index(ha, idx); + if ((ddb_entry != NULL) && + (ddb_entry->ddb_type == FLASH_DDB)) { + + options = LOGOUT_OPTION_CLOSE_SESSION; + if (qla4xxx_session_logout_ddb(ha, ddb_entry, options) + == QLA_ERROR) + ql4_printk(KERN_ERR, ha, "%s: Logout failed\n", + __func__); + + qla4xxx_clear_ddb_entry(ha, ddb_entry->fw_ddb_index); + /* + * we have decremented the reference count of the driver + * when we setup the session to have the driver unload + * to be seamless without actually destroying the + * session + **/ + try_module_get(qla4xxx_iscsi_transport.owner); + iscsi_destroy_endpoint(ddb_entry->conn->ep); + qla4xxx_free_ddb(ha, ddb_entry); + iscsi_session_teardown(ddb_entry->sess); + } + } +} /** * qla4xxx_remove_adapter - calback function to remove adapter. * @pci_dev: PCI device pointer @@ -3465,9 +4436,11 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) /* destroy iface from sysfs */ qla4xxx_destroy_ifaces(ha); - if (ha->boot_kset) + if ((!ql4xdisablesysfsboot) && ha->boot_kset) iscsi_boot_destroy_kset(ha->boot_kset); + qla4xxx_destroy_fw_ddb_session(ha); + scsi_remove_host(ha->host); qla4xxx_free_adapter(ha); @@ -4115,7 +5088,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) qla4_8xxx_idc_unlock(ha); clear_bit(AF_FW_RECOVERY, &ha->flags); - rval = qla4xxx_initialize_adapter(ha); + rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); qla4_8xxx_idc_lock(ha); if (rval != QLA_SUCCESS) { @@ -4151,7 +5124,7 @@ static uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) == QLA82XX_DEV_READY)) { clear_bit(AF_FW_RECOVERY, &ha->flags); - rval = qla4xxx_initialize_adapter(ha); + rval = qla4xxx_initialize_adapter(ha, RESET_ADAPTER); if (rval == QLA_SUCCESS) { ret = qla4xxx_request_irqs(ha); if (ret) { diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index c15347d3f532..5254e57968f5 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k8" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k9" -- cgit v1.2.3-70-g09d2 From e1cd89c507b41e4021ce6fb0d19d230f6a932ccd Mon Sep 17 00:00:00 2001 From: Tomas Henzl Date: Thu, 1 Dec 2011 21:38:42 -0600 Subject: [SCSI] qla4xxx: a small loop fix When the qla4xxx_get_fwddb_entry returns QLA_ERROR the nex_idx is not updated, for (idx = 0; idx < max_ddbs; idx = next_idx) { ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, &next_idx, &state, &conn_err, NULL, NULL); if (ret == QLA_ERROR) continue; This means there is a risk that the 'idx < max_ddbs' condition will never met and the loop will loop forever. Fix this by explicitly increasing the next_idx in the error condition. Maybe a break instead of continue is more appropriate, leaving the decision on the qlogic maintainer. Signed-off-by: Tomas Henzl Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_init.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 0497873a1dd2..1bdfa8120ac8 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -787,8 +787,10 @@ void qla4xxx_free_ddb_index(struct scsi_qla_host *ha) ret = qla4xxx_get_fwddb_entry(ha, idx, NULL, 0, NULL, &next_idx, &state, &conn_err, NULL, NULL); - if (ret == QLA_ERROR) + if (ret == QLA_ERROR) { + next_idx++; continue; + } if (state == DDB_DS_NO_CONNECTION_ACTIVE || state == DDB_DS_SESSION_FAILED) { DEBUG2(ql4_printk(KERN_INFO, ha, -- cgit v1.2.3-70-g09d2 From ff1d0319ac6a5fd859884b30c0a3cb6733b8fb2d Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Thu, 1 Dec 2011 21:38:43 -0600 Subject: [SCSI] qla4xxx: check for failed conn setup iscsi_conn_setup can fail so we must check for NULL being returned. Signed-off-by: Mike Christie Signed-off-by: James Bottomley --- drivers/scsi/qla4xxx/ql4_os.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 95910c9b4776..4169c8baa112 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -1207,6 +1207,9 @@ qla4xxx_conn_create(struct iscsi_cls_session *cls_sess, uint32_t conn_idx) DEBUG2(printk(KERN_INFO "Func: %s\n", __func__)); cls_conn = iscsi_conn_setup(cls_sess, sizeof(struct qla_conn), conn_idx); + if (!cls_conn) + return NULL; + sess = cls_sess->dd_data; ddb_entry = sess->dd_data; ddb_entry->conn = cls_conn; -- cgit v1.2.3-70-g09d2 From cd5cfce856684e13b9b57d46b78bb827e9c4da3c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 12 Dec 2011 09:23:48 -0500 Subject: drm/radeon/kms: add some new pci ids Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=43739 Signed-off-by: Alex Deucher Cc: stable@kernel.org Signed-off-by: Dave Airlie --- include/drm/drm_pciids.h | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h index 4e4fbb820e20..14b6cd022284 100644 --- a/include/drm/drm_pciids.h +++ b/include/drm/drm_pciids.h @@ -182,8 +182,11 @@ {0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x675D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -195,8 +198,10 @@ {0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -246,6 +251,7 @@ {0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ + {0x1002, 0x68fa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \ {0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ @@ -488,6 +494,8 @@ {0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\ {0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ @@ -502,6 +510,8 @@ {0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ + {0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \ {0, 0, 0} #define r128_PCI_IDS \ -- cgit v1.2.3-70-g09d2 From a878185c3b93e692ace0d1628a47f3d75504ab4f Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Tue, 6 Dec 2011 22:41:21 -0800 Subject: [SCSI] bnx2i: Fixed kernel panic caused by unprotected task->sc->request deref During session recovery, the conn_stop call will trigger a flush to all outstanding SCSI cmds in the xmit queue. This will set all outstanding task->sc to NULL prior to the session_teardown call which frees the task memory. In the bnx2i SCSI response processing path, only the task was being checked for NULL under the session lock before the task->sc->request dereferencing. If there are outstanding SCSI cmd responses pending for process, the following kernel panic can be exposed where task->sc was found to be NULL. Call Trace: [ 69.720205] [] bnx2i_process_new_cqes+0x290/0x3c0 [bnx2i] [ 69.804289] [] bnx2i_fastpath_notification+0x33/0xa0 [bnx2 i] [ 69.891490] [] bnx2i_indicate_kcqe+0xdb/0x330 [bnx2i] [ 69.971427] [] service_kcqes+0x16e/0x1d0 [cnic] [ 70.045132] [] cnic_service_bnx2x_kcq+0x2a/0x50 [cnic] [ 70.126105] [] cnic_service_bnx2x_bh+0x43/0x140 [cnic] [ 70.207081] [] tasklet_action+0x66/0x110 [ 70.273521] [] __do_softirq+0xef/0x220 [ 70.337887] [] call_softirq+0x1c/0x30 This patch adds the !task->sc check and also protects the sc dereferencing under the session lock. Signed-off-by: Eddie Wai Signed-off-by: James Bottomley --- drivers/scsi/bnx2i/bnx2i_hwi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index dba72a4e6a1c..1ad0b8225560 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1906,18 +1906,19 @@ static int bnx2i_queue_scsi_cmd_resp(struct iscsi_session *session, spin_lock(&session->lock); task = iscsi_itt_to_task(bnx2i_conn->cls_conn->dd_data, cqe->itt & ISCSI_CMD_RESPONSE_INDEX); - if (!task) { + if (!task || !task->sc) { spin_unlock(&session->lock); return -EINVAL; } sc = task->sc; - spin_unlock(&session->lock); if (!blk_rq_cpu_valid(sc->request)) cpu = smp_processor_id(); else cpu = sc->request->cpu; + spin_unlock(&session->lock); + p = &per_cpu(bnx2i_percpu, cpu); spin_lock(&p->p_work_lock); if (unlikely(!p->iothread)) { -- cgit v1.2.3-70-g09d2 From b51306c63449d7f06ffa689036ba49eb46e898b5 Mon Sep 17 00:00:00 2001 From: Ajaykumar Hotchandani Date: Mon, 12 Dec 2011 13:57:36 +0530 Subject: PCI: Set device power state to PCI_D0 for device without native PM support During test of one IB card with guest VM, found that, msi is not initialized properly. It turns out __write_msi_msg will do nothing if device current_state is not PCI_D0. And, that pci device does not have pm_cap in guest VM. There is an error in setting of power state to PCI_D0 in pci_enable_device(), but error is not returned for this. Following is code flow: pci_enable_device() --> __pci_enable_device_flags() --> do_pci_enable_device() --> pci_set_power_state() --> __pci_start_power_transition() We have following condition inside __pci_start_power_transition(): if (platform_pci_power_manageable(dev)) { error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ if (!dev->pm_cap) dev->current_state = PCI_D0; } Here, from platform_pci_set_power_state(), acpi_pci_set_power_state() is getting called and that is failing with ENODEV because of following condition: if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0",&tmp))) return -ENODEV; Because of that, pci_update_current_state() is not getting called. With this patch, if device power state can not be set via platform_pci_set_power_state and that device does not have native pm support, then PCI device power state will be set to PCI_D0. -v2: This also reverts 47e9037ac16637cd7f12b8790ea7ce6680e42168, as it's not needed after this change. Acked-by: "Rafael J. Wysocki" Signed-off-by: Ajaykumar Hotchandani Signed-off-by: Yinghai Lu Signed-off-by: Jesse Barnes --- drivers/pci/hotplug/acpiphp_glue.c | 1 - drivers/pci/pci.c | 3 +++ 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 68360d5b494a..9ddf69e3bbef 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -225,7 +225,6 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) pdev = pci_get_slot(pbus, PCI_DEVFN(device, function)); if (pdev) { - pdev->current_state = PCI_D0; slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON); pci_dev_put(pdev); } diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4788413f43d7..faccb8937706 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -664,6 +664,9 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state) error = platform_pci_set_power_state(dev, state); if (!error) pci_update_current_state(dev, state); + /* Fall back to PCI_D0 if native PM is not supported */ + if (!dev->pm_cap) + dev->current_state = PCI_D0; } else { error = -ENODEV; /* Fall back to PCI_D0 if native PM is not supported */ -- cgit v1.2.3-70-g09d2 From b1f44e13a525d2ffb7d5afe2273b7169d6f2222e Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 14 Dec 2011 10:05:22 -0800 Subject: sparc32: Be less strict in matching %lo part of relocation. The "(insn & 0x01800000) != 0x01800000" test matches 'restore' but that is a legitimate place to see the %lo() part of a 32-bit symbol relocation, particularly in tail calls. Signed-off-by: David S. Miller Tested-by: Sergei Trofimovich --- arch/sparc/mm/btfixup.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c index 5175ac2f4820..8a7f81743c12 100644 --- a/arch/sparc/mm/btfixup.c +++ b/arch/sparc/mm/btfixup.c @@ -302,8 +302,7 @@ void __init btfixup(void) case 'i': /* INT */ if ((insn & 0xc1c00000) == 0x01000000) /* %HI */ set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10)); - else if ((insn & 0x80002000) == 0x80002000 && - (insn & 0x01800000) != 0x01800000) /* %LO */ + else if ((insn & 0x80002000) == 0x80002000) /* %LO */ set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff)); else { prom_printf(insn_i, p, addr, insn); -- cgit v1.2.3-70-g09d2 From 248b122b131202de95aaa3670e48465619bdff14 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 14 Dec 2011 21:59:30 +0200 Subject: usb: dwc3: core: fix cached revision on our structure All our revision macros are defined with the entire 32-bits which we read from GSNPSID register, so we must cache all 32-bits properly rather than masking the top 16-bits. This will fix all revision checks we have on current driver. Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 717ebc9ff941..600d82348511 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -264,7 +264,7 @@ static int __devinit dwc3_core_init(struct dwc3 *dwc) ret = -ENODEV; goto err0; } - dwc->revision = reg & DWC3_GSNPSREV_MASK; + dwc->revision = reg; dwc3_core_soft_reset(dwc); -- cgit v1.2.3-70-g09d2 From 6f6c2aa33b915c574543f176dee89d7aefc115c1 Mon Sep 17 00:00:00 2001 From: john fastabend Date: Fri, 18 Nov 2011 13:35:56 -0800 Subject: [SCSI] fcoe: fix fcoe in a DCB environment by adding DCB notifiers to set skb priority Use DCB notifiers to set the skb priority to allow packets to be steered and tagged correctly over DCB enabled drivers that setup traffic classes. This allows queue_mapping() routines to be removed in these drivers that were previously inspecting the ethertype of every skb to mark FCoE/FIP frames. Signed-off-by: John Fastabend Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/fcoe/fcoe.c | 115 ++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/fcoe/fcoe_ctlr.c | 4 ++ include/scsi/libfcoe.h | 3 ++ 3 files changed, 122 insertions(+) diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index f3f440c955f3..8d67467dd9ce 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -31,6 +31,8 @@ #include #include #include +#include +#include #include #include #include @@ -101,6 +103,8 @@ static int fcoe_ddp_done(struct fc_lport *, u16); static int fcoe_ddp_target(struct fc_lport *, u16, struct scatterlist *, unsigned int); static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *); +static int fcoe_dcb_app_notification(struct notifier_block *notifier, + ulong event, void *ptr); static bool fcoe_match(struct net_device *netdev); static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode); @@ -129,6 +133,11 @@ static struct notifier_block fcoe_cpu_notifier = { .notifier_call = fcoe_cpu_callback, }; +/* notification function for DCB events */ +static struct notifier_block dcb_notifier = { + .notifier_call = fcoe_dcb_app_notification, +}; + static struct scsi_transport_template *fcoe_nport_scsi_transport; static struct scsi_transport_template *fcoe_vport_scsi_transport; @@ -1522,6 +1531,8 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp) skb_reset_network_header(skb); skb->mac_len = elen; skb->protocol = htons(ETH_P_FCOE); + skb->priority = port->priority; + if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN && fcoe->realdev->features & NETIF_F_HW_VLAN_TX) { skb->vlan_tci = VLAN_TAG_PRESENT | @@ -1747,6 +1758,7 @@ int fcoe_percpu_receive_thread(void *arg) */ static void fcoe_dev_setup(void) { + register_dcbevent_notifier(&dcb_notifier); register_netdevice_notifier(&fcoe_notifier); } @@ -1755,9 +1767,69 @@ static void fcoe_dev_setup(void) */ static void fcoe_dev_cleanup(void) { + unregister_dcbevent_notifier(&dcb_notifier); unregister_netdevice_notifier(&fcoe_notifier); } +static struct fcoe_interface * +fcoe_hostlist_lookup_realdev_port(struct net_device *netdev) +{ + struct fcoe_interface *fcoe; + struct net_device *real_dev; + + list_for_each_entry(fcoe, &fcoe_hostlist, list) { + if (fcoe->netdev->priv_flags & IFF_802_1Q_VLAN) + real_dev = vlan_dev_real_dev(fcoe->netdev); + else + real_dev = fcoe->netdev; + + if (netdev == real_dev) + return fcoe; + } + return NULL; +} + +static int fcoe_dcb_app_notification(struct notifier_block *notifier, + ulong event, void *ptr) +{ + struct dcb_app_type *entry = ptr; + struct fcoe_interface *fcoe; + struct net_device *netdev; + struct fcoe_port *port; + int prio; + + if (entry->app.selector != DCB_APP_IDTYPE_ETHTYPE) + return NOTIFY_OK; + + netdev = dev_get_by_index(&init_net, entry->ifindex); + if (!netdev) + return NOTIFY_OK; + + fcoe = fcoe_hostlist_lookup_realdev_port(netdev); + dev_put(netdev); + if (!fcoe) + return NOTIFY_OK; + + if (entry->dcbx & DCB_CAP_DCBX_VER_CEE) + prio = ffs(entry->app.priority) - 1; + else + prio = entry->app.priority; + + if (prio < 0) + return NOTIFY_OK; + + if (entry->app.protocol == ETH_P_FIP || + entry->app.protocol == ETH_P_FCOE) + fcoe->ctlr.priority = prio; + + if (entry->app.protocol == ETH_P_FCOE) { + port = lport_priv(fcoe->ctlr.lp); + port->priority = prio; + } + + return NOTIFY_OK; +} + /** * fcoe_device_notification() - Handler for net device events * @notifier: The context of the notification @@ -1965,6 +2037,46 @@ static bool fcoe_match(struct net_device *netdev) return true; } +/** + * fcoe_dcb_create() - Initialize DCB attributes and hooks + * @netdev: The net_device object of the L2 link that should be queried + * @port: The fcoe_port to bind FCoE APP priority with + * @ + */ +static void fcoe_dcb_create(struct fcoe_interface *fcoe) +{ +#ifdef CONFIG_DCB + int dcbx; + u8 fup, up; + struct net_device *netdev = fcoe->realdev; + struct fcoe_port *port = lport_priv(fcoe->ctlr.lp); + struct dcb_app app = { + .priority = 0, + .protocol = ETH_P_FCOE + }; + + /* setup DCB priority attributes. */ + if (netdev && netdev->dcbnl_ops && netdev->dcbnl_ops->getdcbx) { + dcbx = netdev->dcbnl_ops->getdcbx(netdev); + + if (dcbx & DCB_CAP_DCBX_VER_IEEE) { + app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE; + up = dcb_ieee_getapp_mask(netdev, &app); + app.protocol = ETH_P_FIP; + fup = dcb_ieee_getapp_mask(netdev, &app); + } else { + app.selector = DCB_APP_IDTYPE_ETHTYPE; + up = dcb_getapp(netdev, &app); + app.protocol = ETH_P_FIP; + fup = dcb_getapp(netdev, &app); + } + + port->priority = ffs(up) ? ffs(up) - 1 : 0; + fcoe->ctlr.priority = ffs(fup) ? ffs(fup) - 1 : port->priority; + } +#endif +} + /** * fcoe_create() - Create a fcoe interface * @netdev : The net_device object the Ethernet interface to create on @@ -2008,6 +2120,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) /* Make this the "master" N_Port */ fcoe->ctlr.lp = lport; + /* setup DCB priority attributes. */ + fcoe_dcb_create(fcoe); + /* add to lports list */ fcoe_hostlist_add(lport); diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index c74c4b8e71ef..e7522dcc296e 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -320,6 +320,7 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf) skb_put(skb, sizeof(*sol)); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); fip->send(fip, skb); @@ -474,6 +475,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip, } skb_put(skb, len); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); fip->send(fip, skb); @@ -566,6 +568,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport, cap->fip.fip_dl_len = htons(dlen / FIP_BPW); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); return 0; @@ -1911,6 +1914,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip, skb_put(skb, len); skb->protocol = htons(ETH_P_FIP); + skb->priority = fip->priority; skb_reset_mac_header(skb); skb_reset_network_header(skb); diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index d1e95c6ac776..5a35a2a2d3c5 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -147,6 +147,7 @@ struct fcoe_ctlr { u8 map_dest; u8 spma; u8 probe_tries; + u8 priority; u8 dest_addr[ETH_ALEN]; u8 ctl_src_addr[ETH_ALEN]; @@ -301,6 +302,7 @@ struct fcoe_percpu_s { * @lport: The associated local port * @fcoe_pending_queue: The pending Rx queue of skbs * @fcoe_pending_queue_active: Indicates if the pending queue is active + * @priority: Packet priority (DCB) * @max_queue_depth: Max queue depth of pending queue * @min_queue_depth: Min queue depth of pending queue * @timer: The queue timer @@ -316,6 +318,7 @@ struct fcoe_port { struct fc_lport *lport; struct sk_buff_head fcoe_pending_queue; u8 fcoe_pending_queue_active; + u8 priority; u32 max_queue_depth; u32 min_queue_depth; struct timer_list timer; -- cgit v1.2.3-70-g09d2 From 645e903528ca6cd510f9ac71a6a23de1a4d931e3 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Wed, 14 Dec 2011 15:52:30 +0800 Subject: ALSA: HDA: Use LPIB Position fix for Intel SCH Poulsbo Several people with this chipset have reported inconsistent/sloppy values for position reporting when the DMA position buffer is used, and that setting position_fix=1 have fixed their problems. BugLink: https://bugs.launchpad.net/bugs/825709 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/hda_intel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 84d11d7ed710..c2f79e63124d 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2971,7 +2971,8 @@ static DEFINE_PCI_DEVICE_TABLE(azx_ids) = { /* SCH */ { PCI_DEVICE(0x8086, 0x811b), .driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP | - AZX_DCAPS_BUFSIZE}, + AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_LPIB }, /* Poulsbo */ + /* ICH */ { PCI_DEVICE(0x8086, 0x2668), .driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC | AZX_DCAPS_BUFSIZE }, /* ICH6 */ -- cgit v1.2.3-70-g09d2 From f4a2f4c548296168832ad4ab7e7f7b0cd0bf1214 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:01 -0500 Subject: Btrfs: fix wrong i_size when truncating a file to a larger size Btrfsck report error 100 after the 83th case of xfstests was run, it means the i_size of the file is wrong. The reason of this bug is that: Btrfs increased i_size of the file at the beginning, but it failed to expand the file, and failed to update the i_size to the old size because there is no enough space in the file system, so we found a wrong i_size. This patch fixes this bug by updating the i_size just when we pass the file expanding and get enough space to update i-node. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c5ccec23984c..4bbceb928aff 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3370,6 +3370,8 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) static int btrfs_setsize(struct inode *inode, loff_t newsize) { + struct btrfs_root *root = BTRFS_I(inode)->root; + struct btrfs_trans_handle *trans; loff_t oldsize = i_size_read(inode); int ret; @@ -3377,16 +3379,20 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) return 0; if (newsize > oldsize) { - i_size_write(inode, newsize); - btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL); truncate_pagecache(inode, oldsize, newsize); ret = btrfs_cont_expand(inode, oldsize, newsize); - if (ret) { - btrfs_setsize(inode, oldsize); + if (ret) return ret; - } - mark_inode_dirty(inode); + trans = btrfs_start_transaction(root, 1); + if (IS_ERR(trans)) + return PTR_ERR(trans); + + i_size_write(inode, newsize); + btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL); + ret = btrfs_update_inode(trans, root, inode); + + btrfs_end_transaction_throttle(trans, root); } else { /* -- cgit v1.2.3-70-g09d2 From 3642320e07444cc46327b24977d752f99706dac2 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix wrong disk space information of the files Btrfsck report errors after the 83th case of xfstests was run, The error number is 400, it means the used disk space of the file is wrong. The reason of this bug is that: The file truncation may fail when the space of the file system is not enough, and leave some file extents, whose offset are beyond the end of the files. When we want to expand those files, we will drop those file extents, and put in dummy file extents, and then we should update the i-node. But btrfs forgets to do it. This patch adds the forgotten i-node update. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4bbceb928aff..f1c4bceed072 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -3327,7 +3327,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) u64 hint_byte = 0; hole_size = last_byte - cur_offset; - trans = btrfs_start_transaction(root, 2); + trans = btrfs_start_transaction(root, 3); if (IS_ERR(trans)) { err = PTR_ERR(trans); break; @@ -3337,6 +3337,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) cur_offset + hole_size, &hint_byte, 1); if (err) { + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); break; } @@ -3346,6 +3347,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) 0, hole_size, 0, hole_size, 0, 0, 0); if (err) { + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); break; } @@ -3353,6 +3355,7 @@ int btrfs_cont_expand(struct inode *inode, loff_t oldsize, loff_t size) btrfs_drop_extent_cache(inode, hole_start, last_byte - 1, 0); + btrfs_update_inode(trans, root, inode); btrfs_end_transaction(trans, root); } free_extent_map(em); -- cgit v1.2.3-70-g09d2 From 39fb26c398ddf8d7794a85e896cfe1a42e55524b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix inaccurate available space on raid0 profile When we use raid0 as the data profile, df command may show us a very inaccurate value of the available space, which may be much less than the real one. It may make the users puzzled. Fix it by changing the calculation of the available space, and making it be more similar to a fake chunk allocation. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/super.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 1a3ce9e0b495..41495dce4db0 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1079,7 +1079,7 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) u64 avail_space; u64 used_space; u64 min_stripe_size; - int min_stripes = 1; + int min_stripes = 1, num_stripes = 1; int i = 0, nr_devices; int ret; @@ -1093,12 +1093,16 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) /* calc min stripe number for data space alloction */ type = btrfs_get_alloc_profile(root, 1); - if (type & BTRFS_BLOCK_GROUP_RAID0) + if (type & BTRFS_BLOCK_GROUP_RAID0) { min_stripes = 2; - else if (type & BTRFS_BLOCK_GROUP_RAID1) + num_stripes = nr_devices; + } else if (type & BTRFS_BLOCK_GROUP_RAID1) { min_stripes = 2; - else if (type & BTRFS_BLOCK_GROUP_RAID10) + num_stripes = 2; + } else if (type & BTRFS_BLOCK_GROUP_RAID10) { min_stripes = 4; + num_stripes = 4; + } if (type & BTRFS_BLOCK_GROUP_DUP) min_stripe_size = 2 * BTRFS_STRIPE_LEN; @@ -1167,13 +1171,16 @@ static int btrfs_calc_avail_data_space(struct btrfs_root *root, u64 *free_bytes) i = nr_devices - 1; avail_space = 0; while (nr_devices >= min_stripes) { + if (num_stripes > nr_devices) + num_stripes = nr_devices; + if (devices_info[i].max_avail >= min_stripe_size) { int j; u64 alloc_size; - avail_space += devices_info[i].max_avail * min_stripes; + avail_space += devices_info[i].max_avail * num_stripes; alloc_size = devices_info[i].max_avail; - for (j = i + 1 - min_stripes; j <= i; j++) + for (j = i + 1 - num_stripes; j <= i; j++) devices_info[j].max_avail -= alloc_size; } i--; -- cgit v1.2.3-70-g09d2 From f8e9e0b07be0464e12366631da3da73a1a62449c Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: btrfs: keep orphans for subvolume deletion Since we have the free space caches, btrfs_orphan_cleanup also runs for the tree_root. Unfortunately this also cleans up the orphans used to mark subvol deletions in progress. Currently if a subvol deletion gets interrupted twice by umount/mount, the deletion will not be continued and the space permanently lost, though it would be possible to write a tool to recover those lost subvol deletions. This patch checks if the orphan belongs to a subvol (dead root) and skips the deletion. Signed-off-by: Arne Jansen Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index f1c4bceed072..4a31493d97ac 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2158,6 +2158,38 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) if (ret && ret != -ESTALE) goto out; + if (ret == -ESTALE && root == root->fs_info->tree_root) { + struct btrfs_root *dead_root; + struct btrfs_fs_info *fs_info = root->fs_info; + int is_dead_root = 0; + + /* + * this is an orphan in the tree root. Currently these + * could come from 2 sources: + * a) a snapshot deletion in progress + * b) a free space cache inode + * We need to distinguish those two, as the snapshot + * orphan must not get deleted. + * find_dead_roots already ran before us, so if this + * is a snapshot deletion, we should find the root + * in the dead_roots list + */ + spin_lock(&fs_info->trans_lock); + list_for_each_entry(dead_root, &fs_info->dead_roots, + root_list) { + if (dead_root->root_key.objectid == + found_key.objectid) { + is_dead_root = 1; + break; + } + } + spin_unlock(&fs_info->trans_lock); + if (is_dead_root) { + /* prevent this orphan from being found again */ + key.offset = found_key.objectid - 1; + continue; + } + } /* * Inode is already gone but the orphan item is still there, * kill the orphan item. -- cgit v1.2.3-70-g09d2 From 306424cc880a0fbbdc99eee1f43d056a301a180f Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Wed, 14 Dec 2011 20:12:02 -0500 Subject: Btrfs: fix ctime update of on-disk inode To reproduce the bug: # touch /mnt/tmp # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:23.412105981 +0800 # chattr +i /mnt/tmp # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:43.198105295 +0800 # umount /mnt # mount /dev/loop1 /mnt # stat /mnt/tmp | grep Change Change: 2011-12-09 09:32:23.412105981 +0800 We should update ctime of in-memory inode before calling btrfs_update_inode(). Signed-off-by: Li Zefan Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 72d461656f60..40eaa9fdf07c 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -252,11 +252,11 @@ static int btrfs_ioctl_setflags(struct file *file, void __user *arg) trans = btrfs_join_transaction(root); BUG_ON(IS_ERR(trans)); + btrfs_update_iflags(inode); + inode->i_ctime = CURRENT_TIME; ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); - btrfs_update_iflags(inode); - inode->i_ctime = CURRENT_TIME; btrfs_end_transaction(trans, root); mnt_drop_write(file->f_path.mnt); -- cgit v1.2.3-70-g09d2 From 8f3b65a3d66bcc086e1eb040b7545e70681f2ed1 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 09:29:43 -0500 Subject: Btrfs: add a cond_resched() into the worker loop If we have a constant stream of end_io completions or crc work, we can hit softlockup messages from the async helper threads. This adds a cond_resched() into the loop to avoid them. Signed-off-by: Chris Mason --- fs/btrfs/async-thread.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 7ec14097fef1..203e849dc9c9 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -331,7 +331,7 @@ again: run_ordered_completions(worker->workers, work); check_pending_worker_creates(worker); - + cond_resched(); } spin_lock_irq(&worker->lock); -- cgit v1.2.3-70-g09d2 From ad19db71f498fd858dd84ce603efcf97e321f184 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Thu, 15 Dec 2011 10:09:07 -0500 Subject: BTRFS: Establish i_ops before calling d_instantiate The Smack LSM hook for security_d_instantiate checks the inode's i_op->getxattr value to determine if the containing filesystem supports extended attributes. The BTRFS filesystem sets the inode's i_op value only after it has instantiated the inode. This results in Smack incorrectly giving new BTRFS inodes attributes from the filesystem defaults on the assumption that values can't be stored on the filesystem. This patch moves the assignment of inode operation vectors ahead of the calls to d_instantiate, letting Smack know that the filesystem supports extended attributes. There should be no impact on the performance or behavior of BTRFS. Signed-off-by: Casey Schaufler Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 31 ++++++++++++++++++++++++++----- 1 file changed, 26 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4a31493d97ac..d4a9195c7f0d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4596,11 +4596,18 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + + inode->i_op = &btrfs_special_inode_operations; err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { - inode->i_op = &btrfs_special_inode_operations; init_special_inode(inode, inode->i_mode, rdev); btrfs_update_inode(trans, root, inode); } @@ -4654,14 +4661,21 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + inode->i_fop = &btrfs_file_operations; + inode->i_op = &btrfs_file_inode_operations; + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { inode->i_mapping->a_ops = &btrfs_aops; inode->i_mapping->backing_dev_info = &root->fs_info->bdi; - inode->i_fop = &btrfs_file_operations; - inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } out_unlock: @@ -7117,14 +7131,21 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, goto out_unlock; } + /* + * If the active LSM wants to access the inode during + * d_instantiate it needs these. Smack checks to see + * if the filesystem supports xattrs by looking at the + * ops vector. + */ + inode->i_fop = &btrfs_file_operations; + inode->i_op = &btrfs_file_inode_operations; + err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index); if (err) drop_inode = 1; else { inode->i_mapping->a_ops = &btrfs_aops; inode->i_mapping->backing_dev_info = &root->fs_info->bdi; - inode->i_fop = &btrfs_file_operations; - inode->i_op = &btrfs_file_inode_operations; BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops; } if (drop_inode) -- cgit v1.2.3-70-g09d2 From 0dc3b84a73267f47a75468f924f5d58a840e3152 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 18 Nov 2011 14:37:27 -0500 Subject: Btrfs: fix num_workers_starting bug and other bugs in async thread Al pointed out we have some random problems with the way we account for num_workers_starting in the async thread stuff. First of all we need to make sure to decrement num_workers_starting if we fail to start the worker, so make __btrfs_start_workers do this. Also fix __btrfs_start_workers so that it doesn't call btrfs_stop_workers(), there is no point in stopping everybody if we failed to create a worker. Also check_pending_worker_creates needs to call __btrfs_start_work in it's work function since it already increments num_workers_starting. People only start one worker at a time, so get rid of the num_workers argument everywhere, and make btrfs_queue_worker a void since it will always succeed. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/async-thread.c | 115 +++++++++++++++++++++++------------------------- fs/btrfs/async-thread.h | 4 +- fs/btrfs/disk-io.c | 34 ++++++++------ fs/btrfs/scrub.c | 8 +++- 4 files changed, 83 insertions(+), 78 deletions(-) diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c index 7ec14097fef1..af8e117c8978 100644 --- a/fs/btrfs/async-thread.c +++ b/fs/btrfs/async-thread.c @@ -64,6 +64,8 @@ struct btrfs_worker_thread { int idle; }; +static int __btrfs_start_workers(struct btrfs_workers *workers); + /* * btrfs_start_workers uses kthread_run, which can block waiting for memory * for a very long time. It will actually throttle on page writeback, @@ -88,27 +90,10 @@ static void start_new_worker_func(struct btrfs_work *work) { struct worker_start *start; start = container_of(work, struct worker_start, work); - btrfs_start_workers(start->queue, 1); + __btrfs_start_workers(start->queue); kfree(start); } -static int start_new_worker(struct btrfs_workers *queue) -{ - struct worker_start *start; - int ret; - - start = kzalloc(sizeof(*start), GFP_NOFS); - if (!start) - return -ENOMEM; - - start->work.func = start_new_worker_func; - start->queue = queue; - ret = btrfs_queue_worker(queue->atomic_worker_start, &start->work); - if (ret) - kfree(start); - return ret; -} - /* * helper function to move a thread onto the idle list after it * has finished some requests. @@ -153,12 +138,20 @@ static void check_busy_worker(struct btrfs_worker_thread *worker) static void check_pending_worker_creates(struct btrfs_worker_thread *worker) { struct btrfs_workers *workers = worker->workers; + struct worker_start *start; unsigned long flags; rmb(); if (!workers->atomic_start_pending) return; + start = kzalloc(sizeof(*start), GFP_NOFS); + if (!start) + return; + + start->work.func = start_new_worker_func; + start->queue = workers; + spin_lock_irqsave(&workers->lock, flags); if (!workers->atomic_start_pending) goto out; @@ -170,10 +163,11 @@ static void check_pending_worker_creates(struct btrfs_worker_thread *worker) workers->num_workers_starting += 1; spin_unlock_irqrestore(&workers->lock, flags); - start_new_worker(workers); + btrfs_queue_worker(workers->atomic_worker_start, &start->work); return; out: + kfree(start); spin_unlock_irqrestore(&workers->lock, flags); } @@ -462,56 +456,55 @@ void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max, * starts new worker threads. This does not enforce the max worker * count in case you need to temporarily go past it. */ -static int __btrfs_start_workers(struct btrfs_workers *workers, - int num_workers) +static int __btrfs_start_workers(struct btrfs_workers *workers) { struct btrfs_worker_thread *worker; int ret = 0; - int i; - for (i = 0; i < num_workers; i++) { - worker = kzalloc(sizeof(*worker), GFP_NOFS); - if (!worker) { - ret = -ENOMEM; - goto fail; - } + worker = kzalloc(sizeof(*worker), GFP_NOFS); + if (!worker) { + ret = -ENOMEM; + goto fail; + } - INIT_LIST_HEAD(&worker->pending); - INIT_LIST_HEAD(&worker->prio_pending); - INIT_LIST_HEAD(&worker->worker_list); - spin_lock_init(&worker->lock); - - atomic_set(&worker->num_pending, 0); - atomic_set(&worker->refs, 1); - worker->workers = workers; - worker->task = kthread_run(worker_loop, worker, - "btrfs-%s-%d", workers->name, - workers->num_workers + i); - if (IS_ERR(worker->task)) { - ret = PTR_ERR(worker->task); - kfree(worker); - goto fail; - } - spin_lock_irq(&workers->lock); - list_add_tail(&worker->worker_list, &workers->idle_list); - worker->idle = 1; - workers->num_workers++; - workers->num_workers_starting--; - WARN_ON(workers->num_workers_starting < 0); - spin_unlock_irq(&workers->lock); + INIT_LIST_HEAD(&worker->pending); + INIT_LIST_HEAD(&worker->prio_pending); + INIT_LIST_HEAD(&worker->worker_list); + spin_lock_init(&worker->lock); + + atomic_set(&worker->num_pending, 0); + atomic_set(&worker->refs, 1); + worker->workers = workers; + worker->task = kthread_run(worker_loop, worker, + "btrfs-%s-%d", workers->name, + workers->num_workers + 1); + if (IS_ERR(worker->task)) { + ret = PTR_ERR(worker->task); + kfree(worker); + goto fail; } + spin_lock_irq(&workers->lock); + list_add_tail(&worker->worker_list, &workers->idle_list); + worker->idle = 1; + workers->num_workers++; + workers->num_workers_starting--; + WARN_ON(workers->num_workers_starting < 0); + spin_unlock_irq(&workers->lock); + return 0; fail: - btrfs_stop_workers(workers); + spin_lock_irq(&workers->lock); + workers->num_workers_starting--; + spin_unlock_irq(&workers->lock); return ret; } -int btrfs_start_workers(struct btrfs_workers *workers, int num_workers) +int btrfs_start_workers(struct btrfs_workers *workers) { spin_lock_irq(&workers->lock); - workers->num_workers_starting += num_workers; + workers->num_workers_starting++; spin_unlock_irq(&workers->lock); - return __btrfs_start_workers(workers, num_workers); + return __btrfs_start_workers(workers); } /* @@ -568,6 +561,7 @@ static struct btrfs_worker_thread *find_worker(struct btrfs_workers *workers) struct btrfs_worker_thread *worker; unsigned long flags; struct list_head *fallback; + int ret; again: spin_lock_irqsave(&workers->lock, flags); @@ -584,7 +578,9 @@ again: workers->num_workers_starting++; spin_unlock_irqrestore(&workers->lock, flags); /* we're below the limit, start another worker */ - __btrfs_start_workers(workers, 1); + ret = __btrfs_start_workers(workers); + if (ret) + goto fallback; goto again; } } @@ -665,7 +661,7 @@ void btrfs_set_work_high_prio(struct btrfs_work *work) /* * places a struct btrfs_work into the pending queue of one of the kthreads */ -int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) +void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) { struct btrfs_worker_thread *worker; unsigned long flags; @@ -673,7 +669,7 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) /* don't requeue something already on a list */ if (test_and_set_bit(WORK_QUEUED_BIT, &work->flags)) - goto out; + return; worker = find_worker(workers); if (workers->ordered) { @@ -712,7 +708,4 @@ int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work) if (wake) wake_up_process(worker->task); spin_unlock_irqrestore(&worker->lock, flags); - -out: - return 0; } diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h index 5077746cf85e..f34cc31fa3c9 100644 --- a/fs/btrfs/async-thread.h +++ b/fs/btrfs/async-thread.h @@ -109,8 +109,8 @@ struct btrfs_workers { char *name; }; -int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work); -int btrfs_start_workers(struct btrfs_workers *workers, int num_workers); +void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work); +int btrfs_start_workers(struct btrfs_workers *workers); int btrfs_stop_workers(struct btrfs_workers *workers); void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max, struct btrfs_workers *async_starter); diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 94abc25392f6..3f9d5551e582 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2194,19 +2194,27 @@ struct btrfs_root *open_ctree(struct super_block *sb, fs_info->endio_meta_write_workers.idle_thresh = 2; fs_info->readahead_workers.idle_thresh = 2; - btrfs_start_workers(&fs_info->workers, 1); - btrfs_start_workers(&fs_info->generic_worker, 1); - btrfs_start_workers(&fs_info->submit_workers, 1); - btrfs_start_workers(&fs_info->delalloc_workers, 1); - btrfs_start_workers(&fs_info->fixup_workers, 1); - btrfs_start_workers(&fs_info->endio_workers, 1); - btrfs_start_workers(&fs_info->endio_meta_workers, 1); - btrfs_start_workers(&fs_info->endio_meta_write_workers, 1); - btrfs_start_workers(&fs_info->endio_write_workers, 1); - btrfs_start_workers(&fs_info->endio_freespace_worker, 1); - btrfs_start_workers(&fs_info->delayed_workers, 1); - btrfs_start_workers(&fs_info->caching_workers, 1); - btrfs_start_workers(&fs_info->readahead_workers, 1); + /* + * btrfs_start_workers can really only fail because of ENOMEM so just + * return -ENOMEM if any of these fail. + */ + ret = btrfs_start_workers(&fs_info->workers); + ret |= btrfs_start_workers(&fs_info->generic_worker); + ret |= btrfs_start_workers(&fs_info->submit_workers); + ret |= btrfs_start_workers(&fs_info->delalloc_workers); + ret |= btrfs_start_workers(&fs_info->fixup_workers); + ret |= btrfs_start_workers(&fs_info->endio_workers); + ret |= btrfs_start_workers(&fs_info->endio_meta_workers); + ret |= btrfs_start_workers(&fs_info->endio_meta_write_workers); + ret |= btrfs_start_workers(&fs_info->endio_write_workers); + ret |= btrfs_start_workers(&fs_info->endio_freespace_worker); + ret |= btrfs_start_workers(&fs_info->delayed_workers); + ret |= btrfs_start_workers(&fs_info->caching_workers); + ret |= btrfs_start_workers(&fs_info->readahead_workers); + if (ret) { + ret = -ENOMEM; + goto fail_sb_buffer; + } fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super); fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages, diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index c27bcb67f330..ddf2c90d3fc0 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1535,18 +1535,22 @@ static noinline_for_stack int scrub_supers(struct scrub_dev *sdev) static noinline_for_stack int scrub_workers_get(struct btrfs_root *root) { struct btrfs_fs_info *fs_info = root->fs_info; + int ret = 0; mutex_lock(&fs_info->scrub_lock); if (fs_info->scrub_workers_refcnt == 0) { btrfs_init_workers(&fs_info->scrub_workers, "scrub", fs_info->thread_pool_size, &fs_info->generic_worker); fs_info->scrub_workers.idle_thresh = 4; - btrfs_start_workers(&fs_info->scrub_workers, 1); + ret = btrfs_start_workers(&fs_info->scrub_workers); + if (ret) + goto out; } ++fs_info->scrub_workers_refcnt; +out: mutex_unlock(&fs_info->scrub_lock); - return 0; + return ret; } static noinline_for_stack void scrub_workers_put(struct btrfs_root *root) -- cgit v1.2.3-70-g09d2 From 22c44fe65adacd20a174f3f54686509ee94ef7be Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Wed, 30 Nov 2011 10:45:38 -0500 Subject: Btrfs: deal with enospc from dirtying inodes properly Now that we're properly keeping track of delayed inode space we've been getting a lot of warnings out of btrfs_dirty_inode() when running xfstest 83. This is because a bunch of people call mark_inode_dirty, which is void so we can't return ENOSPC. This needs to be fixed in a few areas 1) file_update_time - this updates the mtime and such when writing to a file, which will call mark_inode_dirty. So copy file_update_time into btrfs so we can call btrfs_dirty_inode directly and return an error if we get one appropriately. 2) fix symlinks to use btrfs_setattr for ->setattr. For some reason we weren't setting ->setattr for symlinks, even though we should have been. This catches one of the cases where we were getting errors in mark_inode_dirty. 3) Fix btrfs_setattr and btrfs_setsize to call btrfs_dirty_inode directly instead of mark_inode_dirty. This lets us return errors properly for truncate and chown/anything related to setattr. 4) Add a new btrfs_fs_dirty_inode which will just call btrfs_dirty_inode and print an error if we have one. The only remaining user we can't control for this is touch_atime(), but we don't really want to keep people from walking down the tree if we don't have space to save the atime update, so just complain but don't worry about it. With this patch xfstests 83 complains a handful of times instead of hundreds of times. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/ctree.h | 3 ++- fs/btrfs/file.c | 6 ++++- fs/btrfs/inode.c | 80 ++++++++++++++++++++++++++++++++++++++++++-------------- fs/btrfs/super.c | 13 ++++++++- 4 files changed, 80 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 50634abef9b4..67385033323d 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -2692,7 +2692,8 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf); int btrfs_readpage(struct file *file, struct page *page); void btrfs_evict_inode(struct inode *inode); int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc); -void btrfs_dirty_inode(struct inode *inode, int flags); +int btrfs_dirty_inode(struct inode *inode); +int btrfs_update_time(struct file *file); struct inode *btrfs_alloc_inode(struct super_block *sb); void btrfs_destroy_inode(struct inode *inode); int btrfs_drop_inode(struct inode *inode); diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index f2e928289600..cc7492c823f3 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1387,7 +1387,11 @@ static ssize_t btrfs_file_aio_write(struct kiocb *iocb, goto out; } - file_update_time(file); + err = btrfs_update_time(file); + if (err) { + mutex_unlock(&inode->i_mutex); + goto out; + } BTRFS_I(inode)->sequence++; start_pos = round_down(pos, root->sectorsize); diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c5ccec23984c..eec33b9c953d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -38,6 +38,7 @@ #include #include #include +#include #include "compat.h" #include "ctree.h" #include "disk-io.h" @@ -3386,7 +3387,7 @@ static int btrfs_setsize(struct inode *inode, loff_t newsize) return ret; } - mark_inode_dirty(inode); + ret = btrfs_dirty_inode(inode); } else { /* @@ -3426,9 +3427,9 @@ static int btrfs_setattr(struct dentry *dentry, struct iattr *attr) if (attr->ia_valid) { setattr_copy(inode, attr); - mark_inode_dirty(inode); + err = btrfs_dirty_inode(inode); - if (attr->ia_valid & ATTR_MODE) + if (!err && attr->ia_valid & ATTR_MODE) err = btrfs_acl_chmod(inode); } @@ -4204,42 +4205,80 @@ int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc) * FIXME, needs more benchmarking...there are no reasons other than performance * to keep or drop this code. */ -void btrfs_dirty_inode(struct inode *inode, int flags) +int btrfs_dirty_inode(struct inode *inode) { struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_trans_handle *trans; int ret; if (BTRFS_I(inode)->dummy_inode) - return; + return 0; trans = btrfs_join_transaction(root); - BUG_ON(IS_ERR(trans)); + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_update_inode(trans, root, inode); if (ret && ret == -ENOSPC) { /* whoops, lets try again with the full transaction */ btrfs_end_transaction(trans, root); trans = btrfs_start_transaction(root, 1); - if (IS_ERR(trans)) { - printk_ratelimited(KERN_ERR "btrfs: fail to " - "dirty inode %llu error %ld\n", - (unsigned long long)btrfs_ino(inode), - PTR_ERR(trans)); - return; - } + if (IS_ERR(trans)) + return PTR_ERR(trans); ret = btrfs_update_inode(trans, root, inode); - if (ret) { - printk_ratelimited(KERN_ERR "btrfs: fail to " - "dirty inode %llu error %d\n", - (unsigned long long)btrfs_ino(inode), - ret); - } } btrfs_end_transaction(trans, root); if (BTRFS_I(inode)->delayed_node) btrfs_balance_delayed_items(root); + + return ret; +} + +/* + * This is a copy of file_update_time. We need this so we can return error on + * ENOSPC for updating the inode in the case of file write and mmap writes. + */ +int btrfs_update_time(struct file *file) +{ + struct inode *inode = file->f_path.dentry->d_inode; + struct timespec now; + int ret; + enum { S_MTIME = 1, S_CTIME = 2, S_VERSION = 4 } sync_it = 0; + + /* First try to exhaust all avenues to not sync */ + if (IS_NOCMTIME(inode)) + return 0; + + now = current_fs_time(inode->i_sb); + if (!timespec_equal(&inode->i_mtime, &now)) + sync_it = S_MTIME; + + if (!timespec_equal(&inode->i_ctime, &now)) + sync_it |= S_CTIME; + + if (IS_I_VERSION(inode)) + sync_it |= S_VERSION; + + if (!sync_it) + return 0; + + /* Finally allowed to write? Takes lock. */ + if (mnt_want_write_file(file)) + return 0; + + /* Only change inode inside the lock region */ + if (sync_it & S_VERSION) + inode_inc_iversion(inode); + if (sync_it & S_CTIME) + inode->i_ctime = now; + if (sync_it & S_MTIME) + inode->i_mtime = now; + ret = btrfs_dirty_inode(inode); + if (!ret) + mark_inode_dirty_sync(inode); + mnt_drop_write(file->f_path.mnt); + return ret; } /* @@ -6304,6 +6343,8 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) u64 page_end; ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); + if (!ret) + ret = btrfs_update_time(vma->vm_file); if (ret) { if (ret == -ENOMEM) ret = VM_FAULT_OOM; @@ -7353,6 +7394,7 @@ static const struct inode_operations btrfs_symlink_inode_operations = { .follow_link = page_follow_link_light, .put_link = page_put_link, .getattr = btrfs_getattr, + .setattr = btrfs_setattr, .permission = btrfs_permission, .setxattr = btrfs_setxattr, .getxattr = btrfs_getxattr, diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 1a3ce9e0b495..05b40457e26c 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -41,6 +41,7 @@ #include #include #include +#include #include "compat.h" #include "delayed-inode.h" #include "ctree.h" @@ -1290,6 +1291,16 @@ static int btrfs_unfreeze(struct super_block *sb) return 0; } +static void btrfs_fs_dirty_inode(struct inode *inode, int flags) +{ + int ret; + + ret = btrfs_dirty_inode(inode); + if (ret) + printk_ratelimited(KERN_ERR "btrfs: fail to dirty inode %Lu " + "error %d\n", btrfs_ino(inode), ret); +} + static const struct super_operations btrfs_super_ops = { .drop_inode = btrfs_drop_inode, .evict_inode = btrfs_evict_inode, @@ -1297,7 +1308,7 @@ static const struct super_operations btrfs_super_ops = { .sync_fs = btrfs_sync_fs, .show_options = btrfs_show_options, .write_inode = btrfs_write_inode, - .dirty_inode = btrfs_dirty_inode, + .dirty_inode = btrfs_fs_dirty_inode, .alloc_inode = btrfs_alloc_inode, .destroy_inode = btrfs_destroy_inode, .statfs = btrfs_statfs, -- cgit v1.2.3-70-g09d2 From 660d3f6cde552323578b85fc5a09a6742f1fe804 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 9 Dec 2011 11:18:51 -0500 Subject: Btrfs: fix how we do delalloc reservations and how we free reservations on error Running xfstests 269 with some tracing my scripts kept spitting out errors about releasing bytes that we didn't actually have reserved. This took me down a huge rabbit hole and it turns out the way we deal with reserved_extents is wrong, we need to only be setting it if the reservation succeeds, otherwise the free() method will come in and unreserve space that isn't actually reserved yet, which can lead to other warnings and such. The math was all working out right in the end, but it caused all sorts of other issues in addition to making my scripts yell and scream and generally make it impossible for me to track down the original issue I was looking for. The other problem is with our error handling in the reservation code. There are two cases that we need to deal with 1) We raced with free. In this case free won't free anything because csum_bytes is modified before we dro the lock in our reservation path, so free rightly doesn't release any space because the reservation code may be depending on that reservation. However if we fail, we need the reservation side to do the free at that point since that space is no longer in use. So as it stands the code was doing this fine and it worked out, except in case #2 2) We don't race with free. Nobody comes in and changes anything, and our reservation fails. In this case we didn't reserve anything anyway and we just need to clean up csum_bytes but not free anything. So we keep track of csum_bytes before we drop the lock and if it hasn't changed we know we can just decrement csum_bytes and carry on. Because of the case where we can race with free()'s since we have to drop our spin_lock to do the reservation, I'm going to serialize all reservations with the i_mutex. We already get this for free in the heavy use paths, truncate and file write all hold the i_mutex, just needed to add it to page_mkwrite and various ioctl/balance things. With this patch my space leak scripts no longer scream bloody murder. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 43 ++++++++++++++++++++++++++++++------------- fs/btrfs/inode.c | 10 ++++++++++ fs/btrfs/ioctl.c | 2 ++ fs/btrfs/relocation.c | 2 ++ 4 files changed, 44 insertions(+), 13 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 05e1386b8bec..4eb4d2748bec 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4203,12 +4203,17 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) struct btrfs_root *root = BTRFS_I(inode)->root; struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv; u64 to_reserve = 0; + u64 csum_bytes; unsigned nr_extents = 0; + int extra_reserve = 0; int flush = 1; int ret; + /* Need to be holding the i_mutex here if we aren't free space cache */ if (btrfs_is_free_space_inode(root, inode)) flush = 0; + else + WARN_ON(!mutex_is_locked(&inode->i_mutex)); if (flush && btrfs_transaction_in_commit(root->fs_info)) schedule_timeout(1); @@ -4219,11 +4224,9 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) BTRFS_I(inode)->outstanding_extents++; if (BTRFS_I(inode)->outstanding_extents > - BTRFS_I(inode)->reserved_extents) { + BTRFS_I(inode)->reserved_extents) nr_extents = BTRFS_I(inode)->outstanding_extents - BTRFS_I(inode)->reserved_extents; - BTRFS_I(inode)->reserved_extents += nr_extents; - } /* * Add an item to reserve for updating the inode when we complete the @@ -4231,11 +4234,12 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) */ if (!BTRFS_I(inode)->delalloc_meta_reserved) { nr_extents++; - BTRFS_I(inode)->delalloc_meta_reserved = 1; + extra_reserve = 1; } to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents); to_reserve += calc_csum_metadata_size(inode, num_bytes, 1); + csum_bytes = BTRFS_I(inode)->csum_bytes; spin_unlock(&BTRFS_I(inode)->lock); ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush); @@ -4245,22 +4249,35 @@ int btrfs_delalloc_reserve_metadata(struct inode *inode, u64 num_bytes) spin_lock(&BTRFS_I(inode)->lock); dropped = drop_outstanding_extent(inode); - to_free = calc_csum_metadata_size(inode, num_bytes, 0); - spin_unlock(&BTRFS_I(inode)->lock); - to_free += btrfs_calc_trans_metadata_size(root, dropped); - /* - * Somebody could have come in and twiddled with the - * reservation, so if we have to free more than we would have - * reserved from this reservation go ahead and release those - * bytes. + * If the inodes csum_bytes is the same as the original + * csum_bytes then we know we haven't raced with any free()ers + * so we can just reduce our inodes csum bytes and carry on. + * Otherwise we have to do the normal free thing to account for + * the case that the free side didn't free up its reserve + * because of this outstanding reservation. */ - to_free -= to_reserve; + if (BTRFS_I(inode)->csum_bytes == csum_bytes) + calc_csum_metadata_size(inode, num_bytes, 0); + else + to_free = calc_csum_metadata_size(inode, num_bytes, 0); + spin_unlock(&BTRFS_I(inode)->lock); + if (dropped) + to_free += btrfs_calc_trans_metadata_size(root, dropped); + if (to_free) btrfs_block_rsv_release(root, block_rsv, to_free); return ret; } + spin_lock(&BTRFS_I(inode)->lock); + if (extra_reserve) { + BTRFS_I(inode)->delalloc_meta_reserved = 1; + nr_extents--; + } + BTRFS_I(inode)->reserved_extents += nr_extents; + spin_unlock(&BTRFS_I(inode)->lock); + block_rsv_add_bytes(block_rsv, to_reserve, 1); return 0; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index eec33b9c953d..8938174e6bc1 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2192,7 +2192,14 @@ int btrfs_orphan_cleanup(struct btrfs_root *root) continue; } nr_truncate++; + /* + * Need to hold the imutex for reservation purposes, not + * a huge deal here but I have a WARN_ON in + * btrfs_delalloc_reserve_space to catch offenders. + */ + mutex_lock(&inode->i_mutex); ret = btrfs_truncate(inode); + mutex_unlock(&inode->i_mutex); } else { nr_unlink++; } @@ -6342,7 +6349,10 @@ int btrfs_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) u64 page_start; u64 page_end; + /* Need this to keep space reservations serialized */ + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE); + mutex_unlock(&inode->i_mutex); if (!ret) ret = btrfs_update_time(vma->vm_file); if (ret) { diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 72d461656f60..dd8891662355 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -858,8 +858,10 @@ static int cluster_pages_for_defrag(struct inode *inode, return 0; file_end = (isize - 1) >> PAGE_CACHE_SHIFT; + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_space(inode, num_pages << PAGE_CACHE_SHIFT); + mutex_unlock(&inode->i_mutex); if (ret) return ret; again: diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index dff29d5e151a..cfb55434a469 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -2947,7 +2947,9 @@ static int relocate_file_extent_cluster(struct inode *inode, index = (cluster->start - offset) >> PAGE_CACHE_SHIFT; last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT; while (index <= last_index) { + mutex_lock(&inode->i_mutex); ret = btrfs_delalloc_reserve_metadata(inode, PAGE_CACHE_SIZE); + mutex_unlock(&inode->i_mutex); if (ret) goto out; -- cgit v1.2.3-70-g09d2 From 7041ee97281c30a78658904140c7bd9373a36142 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 9 Dec 2011 13:26:22 -0500 Subject: Btrfs: fix leaked space in truncate We were occasionaly leaking space when running xfstest 269. This is because if we failed to start the transaction in the truncate loop we'd just goto out, but we need to break so that the inode is removed from the orphan list and the space is properly freed. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 8938174e6bc1..6349c63a4b37 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6566,8 +6566,9 @@ static int btrfs_truncate(struct inode *inode) /* Just need the 1 for updating the inode */ trans = btrfs_start_transaction(root, 1); if (IS_ERR(trans)) { - err = PTR_ERR(trans); - goto out; + ret = err = PTR_ERR(trans); + trans = NULL; + break; } } -- cgit v1.2.3-70-g09d2 From ee4d89f0c4967c624c92516fcc37b41069bfdc23 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 13 Dec 2011 12:55:58 -0500 Subject: Btrfs: don't panic if orphan item already exists I've been hitting this BUG_ON() in btrfs_orphan_add when running xfstest 269 in a loop. This is because we will add an orphan item, do the truncate, the truncate will fail for whatever reason (*cough*ENOSPC*cough*) and then we're left with an orphan item still in the fs. Then we come back later to do another truncate and it blows up because we already have an orphan item. This is ok so just fix the BUG_ON() to only BUG() if ret is not EEXIST. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 6349c63a4b37..b212f391ceab 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2032,7 +2032,7 @@ int btrfs_orphan_add(struct btrfs_trans_handle *trans, struct inode *inode) /* insert an orphan item to track this unlinked/truncated file */ if (insert >= 1) { ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode)); - BUG_ON(ret); + BUG_ON(ret && ret != -EEXIST); } /* insert an orphan item to track subvolume contains orphan files */ -- cgit v1.2.3-70-g09d2 From e65cbb94e036058128a5dec6398be2fd64cf88ba Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 13 Dec 2011 16:04:54 -0500 Subject: Btrfs: only set cache_generation if we setup the block group A user reported a problem booting into a new kernel with the old format inodes. He was panicing in cow_file_range while writing out the inode cache. This is because if the block group is not cached we'll just skip writing out the cache, however if it gets dirtied again in the same transaction and it finished caching we'd go ahead and write it out, but since we set cache_generation to the transid we think we've already truncated it and will just carry on, running into cow_file_range and blowing up. We need to make sure we only set cache_generation if we've done the truncate. The user tested this patch and verified that the panic no longer occured. Thanks, Reported-and-Tested-by: Klaus Bitto Signed-off-by: Josef Bacik --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 4eb4d2748bec..8603ee4e3dfd 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2822,7 +2822,7 @@ out_free: btrfs_release_path(path); out: spin_lock(&block_group->lock); - if (!ret) + if (!ret && dcs == BTRFS_DC_SETUP) block_group->cache_generation = trans->transid; block_group->disk_cache_state = dcs; spin_unlock(&block_group->lock); -- cgit v1.2.3-70-g09d2 From d3db728125c4470a2d061ac10fa7395e18237263 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 14 Dec 2011 12:16:08 +0000 Subject: xen: only limit memory map to maximum reservation for domain 0. d312ae878b6a "xen: use maximum reservation to limit amount of usable RAM" clamped the total amount of RAM to the current maximum reservation. This is correct for dom0 but is not correct for guest domains. In order to boot a guest "pre-ballooned" (e.g. with memory=1G but maxmem=2G) in order to allow for future memory expansion the guest must derive max_pfn from the e820 provided by the toolstack and not the current maximum reservation (which can reflect only the current maximum, not the guest lifetime max). The existing algorithm already behaves this correctly if we do not artificially limit the maximum number of pages for the guest case. For a guest booted with maxmem=512, memory=128 this results in: [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] Xen: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] Xen: 00000000000a0000 - 0000000000100000 (reserved) -[ 0.000000] Xen: 0000000000100000 - 0000000008100000 (usable) -[ 0.000000] Xen: 0000000008100000 - 0000000020800000 (unusable) +[ 0.000000] Xen: 0000000000100000 - 0000000020800000 (usable) ... [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) -[ 0.000000] last_pfn = 0x8100 max_arch_pfn = 0x1000000 +[ 0.000000] last_pfn = 0x20800 max_arch_pfn = 0x1000000 [ 0.000000] initial memory mapped : 0 - 027ff000 [ 0.000000] Base memory trampoline at [c009f000] 9f000 size 4096 -[ 0.000000] init_memory_mapping: 0000000000000000-0000000008100000 -[ 0.000000] 0000000000 - 0008100000 page 4k -[ 0.000000] kernel direct mapping tables up to 8100000 @ 27bb000-27ff000 +[ 0.000000] init_memory_mapping: 0000000000000000-0000000020800000 +[ 0.000000] 0000000000 - 0020800000 page 4k +[ 0.000000] kernel direct mapping tables up to 20800000 @ 26f8000-27ff000 [ 0.000000] xen: setting RW the range 27e8000 - 27ff000 [ 0.000000] 0MB HIGHMEM available. -[ 0.000000] 129MB LOWMEM available. -[ 0.000000] mapped low ram: 0 - 08100000 -[ 0.000000] low ram: 0 - 08100000 +[ 0.000000] 520MB LOWMEM available. +[ 0.000000] mapped low ram: 0 - 20800000 +[ 0.000000] low ram: 0 - 20800000 With this change "xl mem-set 512M" will successfully increase the guest RAM (by reducing the balloon). There is no change for dom0. Reported-and-Tested-by: George Shuklin Signed-off-by: Ian Campbell Cc: stable@kernel.org Reviewed-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/setup.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-) diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 38d0af4fefec..a54ff1aab6eb 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void) domid_t domid = DOMID_SELF; int ret; - ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); - if (ret > 0) - max_pages = ret; + /* + * For the initial domain we use the maximum reservation as + * the maximum page. + * + * For guest domains the current maximum reservation reflects + * the current maximum rather than the static maximum. In this + * case the e820 map provided to us will cover the static + * maximum region. + */ + if (xen_initial_domain()) { + ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid); + if (ret > 0) + max_pages = ret; + } + return min(max_pages, MAX_DOMAIN_PAGES); } -- cgit v1.2.3-70-g09d2 From 63a741757d15320a25ebf5778f8651cce2ed0611 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 15 Dec 2011 11:28:46 -0500 Subject: xen/swiotlb: Use page alignment for early buffer allocation. This fixes an odd bug found on a Dell PowerEdge 1850/0RC130 (BIOS A05 01/09/2006) where all of the modules doing pci_set_dma_mask would fail with: ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ata_piix 0000:00:1f.1: can't derive routing for PCI INT A ata_piix 0000:00:1f.1: BMDMA: failed to set dma mask, falling back to PIO The issue was the Xen-SWIOTLB was allocated such as that the end of buffer was stradling a page (and also above 4GB). The fix was spotted by Kalev Leonid which was to piggyback on git commit e79f86b2ef9c0a8c47225217c1018b7d3d90101c "swiotlb: Use page alignment for early buffer allocation" which: We could call free_bootmem_late() if swiotlb is not used, and it will shrink to page alignment. So alloc them with page alignment at first, to avoid lose two pages And doing that fixes the outstanding issue. CC: stable@kernel.org Suggested-by: "Kalev, Leonid" Reported-and-Tested-by: "Taylor, Neal E" Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/swiotlb-xen.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c index 8e964b91c447..284798aaf8b1 100644 --- a/drivers/xen/swiotlb-xen.c +++ b/drivers/xen/swiotlb-xen.c @@ -166,7 +166,7 @@ retry: /* * Get IO TLB memory from any location. */ - xen_io_tlb_start = alloc_bootmem(bytes); + xen_io_tlb_start = alloc_bootmem_pages(PAGE_ALIGN(bytes)); if (!xen_io_tlb_start) { m = "Cannot allocate Xen-SWIOTLB buffer!\n"; goto error; @@ -179,7 +179,7 @@ retry: bytes, xen_io_tlb_nslabs); if (rc) { - free_bootmem(__pa(xen_io_tlb_start), bytes); + free_bootmem(__pa(xen_io_tlb_start), PAGE_ALIGN(bytes)); m = "Failed to get contiguous memory for DMA from Xen!\n"\ "You either: don't have the permissions, do not have"\ " enough free memory under 4GB, or the hypervisor memory"\ -- cgit v1.2.3-70-g09d2 From 87b9b0e0d50db3282fb1eb702307ccfca8775744 Mon Sep 17 00:00:00 2001 From: Ashish Jangam Date: Thu, 15 Dec 2011 14:55:46 +0530 Subject: gpio: Fix DA9052 GPIO build errors. This patch is functionally tested on Samsung SMDKV6410. Reported-by: Stephen Rothwell Signed-off-by: David Dajun Chen Signed-off-by: Ashish Jangam [grant.likely: don't create an unnecessary header file] Signed-off-by: Grant Likely --- drivers/gpio/gpio-da9052.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c index 038f5eb8b13d..f8ce29ef9f88 100644 --- a/drivers/gpio/gpio-da9052.c +++ b/drivers/gpio/gpio-da9052.c @@ -22,7 +22,6 @@ #include #include #include -#include #define DA9052_INPUT 1 #define DA9052_OUTPUT_OPENDRAIN 2 @@ -43,6 +42,9 @@ #define DA9052_GPIO_MASK_UPPER_NIBBLE 0xF0 #define DA9052_GPIO_MASK_LOWER_NIBBLE 0x0F #define DA9052_GPIO_NIBBLE_SHIFT 4 +#define DA9052_IRQ_GPI0 16 +#define DA9052_GPIO_ODD_SHIFT 7 +#define DA9052_GPIO_EVEN_SHIFT 3 struct da9052_gpio { struct da9052 *da9052; @@ -104,33 +106,26 @@ static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset) static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value) { struct da9052_gpio *gpio = to_da9052_gpio(gc); - unsigned char register_value = 0; int ret; if (da9052_gpio_port_odd(offset)) { - if (value) { - register_value = DA9052_GPIO_ODD_PORT_MODE; ret = da9052_reg_update(gpio->da9052, (offset >> 1) + DA9052_GPIO_0_1_REG, DA9052_GPIO_ODD_PORT_MODE, - register_value); + value << DA9052_GPIO_ODD_SHIFT); if (ret != 0) dev_err(gpio->da9052->dev, "Failed to updated gpio odd reg,%d", ret); - } } else { - if (value) { - register_value = DA9052_GPIO_EVEN_PORT_MODE; ret = da9052_reg_update(gpio->da9052, (offset >> 1) + DA9052_GPIO_0_1_REG, DA9052_GPIO_EVEN_PORT_MODE, - register_value); + value << DA9052_GPIO_EVEN_SHIFT); if (ret != 0) dev_err(gpio->da9052->dev, "Failed to updated gpio even reg,%d", ret); - } } } @@ -201,9 +196,9 @@ static struct gpio_chip reference_gp __devinitdata = { .direction_input = da9052_gpio_direction_input, .direction_output = da9052_gpio_direction_output, .to_irq = da9052_gpio_to_irq, - .can_sleep = 1; - .ngpio = 16; - .base = -1; + .can_sleep = 1, + .ngpio = 16, + .base = -1, }; static int __devinit da9052_gpio_probe(struct platform_device *pdev) -- cgit v1.2.3-70-g09d2 From e755d9ab387c4c2401dce5b6f435432a829f41cb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 13:36:29 -0500 Subject: Btrfs: deal with NULL srv_rsv in the delalloc inode reservation code btrfs_update_inode is sometimes called with a null reservation. Signed-off-by: Chris Mason --- fs/btrfs/delayed-inode.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index 6a1a6800776c..c7ddf8a01c54 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -640,8 +640,8 @@ static int btrfs_delayed_inode_reserve_metadata( * Now if src_rsv == delalloc_block_rsv we'll let it just steal since * we're accounted for. */ - if (!trans->bytes_reserved && - src_rsv != &root->fs_info->delalloc_block_rsv) { + if (!src_rsv || (!trans->bytes_reserved && + src_rsv != &root->fs_info->delalloc_block_rsv)) { ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes); /* * Since we're under a transaction reserve_metadata_bytes could -- cgit v1.2.3-70-g09d2 From 4eabc941259f9d8c8fb71746d3f30c87e1d9e49b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 15 Dec 2011 20:03:04 +0100 Subject: block: don't kick empty queue in blk_drain_queue() While probing, fd sets up queue, probes hardware and tears down the queue if probing fails. In the process, blk_drain_queue() kicks the queue which failed to finish initialization and fd is unhappy about that. floppy0: no floppy controllers found ------------[ cut here ]------------ WARNING: at drivers/block/floppy.c:2929 do_fd_request+0xbf/0xd0() Hardware name: To Be Filled By O.E.M. VFS: do_fd_request called on non-open device Modules linked in: Pid: 1, comm: swapper Not tainted 3.2.0-rc4-00077-g5983fe2 #2 Call Trace: [] warn_slowpath_common+0x7a/0xb0 [] warn_slowpath_fmt+0x41/0x50 [] do_fd_request+0xbf/0xd0 [] blk_drain_queue+0x65/0x80 [] blk_cleanup_queue+0xe3/0x1a0 [] floppy_init+0xdeb/0xe28 [] ? daring+0x6b/0x6b [] do_one_initcall+0x3f/0x170 [] kernel_init+0x9d/0x11e [] ? schedule_tail+0x22/0xa0 [] kernel_thread_helper+0x4/0x10 [] ? start_kernel+0x2be/0x2be [] ? gs_change+0xb/0xb Avoid it by making blk_drain_queue() kick queue iff dispatch queue has something on it. Signed-off-by: Tejun Heo Reported-by: Ralf Hildebrandt Reported-by: Wu Fengguang Tested-by: Sergei Trofimovich Signed-off-by: Jens Axboe --- block/blk-core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/block/blk-core.c b/block/blk-core.c index 20d69f6beb6b..15de223c7f93 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -366,7 +366,14 @@ void blk_drain_queue(struct request_queue *q, bool drain_all) if (drain_all) blk_throtl_drain(q); - __blk_run_queue(q); + /* + * This function might be called on a queue which failed + * driver init after queue creation. Some drivers + * (e.g. fd) get unhappy in such cases. Kick queue iff + * dispatch queue has something on it. + */ + if (!list_empty(&q->queue_head)) + __blk_run_queue(q); if (drain_all) nr_rqs = q->rq.count[0] + q->rq.count[1]; -- cgit v1.2.3-70-g09d2 From 9f57bd4d6dc69a4e3bf43044fa00fcd24dd363e3 Mon Sep 17 00:00:00 2001 From: Eugene Surovegin Date: Thu, 15 Dec 2011 11:25:59 -0800 Subject: percpu: fix per_cpu_ptr_to_phys() handling of non-page-aligned addresses per_cpu_ptr_to_phys() incorrectly rounds up its result for non-kmalloc case to the page boundary, which is bogus for any non-page-aligned address. This affects the only in-tree user of this function - sysfs handler for per-cpu 'crash_notes' physical address. The trouble is that the crash_notes per-cpu variable is not page-aligned: crash_notes = 0xc08e8ed4 PER-CPU OFFSET VALUES: CPU 0: 3711f000 CPU 1: 37129000 CPU 2: 37133000 CPU 3: 3713d000 So, the per-cpu addresses are: crash_notes on CPU 0: f7a07ed4 => phys 36b57ed4 crash_notes on CPU 1: f7a11ed4 => phys 36b4ded4 crash_notes on CPU 2: f7a1bed4 => phys 36b43ed4 crash_notes on CPU 3: f7a25ed4 => phys 36b39ed4 However, /sys/devices/system/cpu/cpu*/crash_notes says: /sys/devices/system/cpu/cpu0/crash_notes: 36b57000 /sys/devices/system/cpu/cpu1/crash_notes: 36b4d000 /sys/devices/system/cpu/cpu2/crash_notes: 36b43000 /sys/devices/system/cpu/cpu3/crash_notes: 36b39000 As you can see, all values are rounded down to a page boundary. Consequently, this is where kexec sets up the NOTE segments, and thus where the secondary kernel is looking for them. However, when the first kernel crashes, it saves the notes to the unaligned addresses, where they are not found. Fix it by adding offset_in_page() to the translated page address. -tj: Combined Eugene's and Petr's commit messages. Signed-off-by: Eugene Surovegin Signed-off-by: Tejun Heo Reported-by: Petr Tesarik Cc: stable@kernel.org --- mm/percpu.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/percpu.c b/mm/percpu.c index 3bb810a72006..716eb4acf2fc 100644 --- a/mm/percpu.c +++ b/mm/percpu.c @@ -1023,9 +1023,11 @@ phys_addr_t per_cpu_ptr_to_phys(void *addr) if (!is_vmalloc_addr(addr)) return __pa(addr); else - return page_to_phys(vmalloc_to_page(addr)); + return page_to_phys(vmalloc_to_page(addr)) + + offset_in_page(addr); } else - return page_to_phys(pcpu_addr_to_page(addr)); + return page_to_phys(pcpu_addr_to_page(addr)) + + offset_in_page(addr); } /** -- cgit v1.2.3-70-g09d2 From d85c8a6f1bc083279215ff6e79b7c292bf3ec905 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Thu, 15 Dec 2011 15:38:41 -0500 Subject: Btrfs: unplug every once and a while The btrfs io submission threads can build up massive plug lists. This keeps things more reasonable so we don't hand over huge dumps of IO at once. Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 91ea57a1474a..f4b839fd3c9d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -295,6 +295,12 @@ loop_lock: btrfs_requeue_work(&device->work); goto done; } + /* unplug every 64 requests just for good measure */ + if (batch_run % 64 == 0) { + blk_finish_plug(&plug); + blk_start_plug(&plug); + sync_pending = 0; + } } cond_resched(); -- cgit v1.2.3-70-g09d2 From ddf5a25c5fdd4cc276edf451871c38002eec0f95 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Thu, 15 Dec 2011 21:47:56 +0100 Subject: ARM: unwinder: fix bisection to find origin in .idx section MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bisection implemented in unwind_find_origin() stopped to early. If there is only a single entry left to check the original code just took the end point as origin which might be wrong. This was introduced in commit de66a979012d ("ARM: 7187/1: fix unwinding for XIP kernels"). Reported-and-tested-by: Nick Bowler Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Torvalds --- arch/arm/kernel/unwind.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index 3f03fe0c3269..00df012c4678 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -160,12 +160,12 @@ static const struct unwind_idx *unwind_find_origin( const struct unwind_idx *start, const struct unwind_idx *stop) { pr_debug("%s(%p, %p)\n", __func__, start, stop); - while (start < stop - 1) { + while (start < stop) { const struct unwind_idx *mid = start + ((stop - start) >> 1); if (mid->addr_offset >= 0x40000000) /* negative offset */ - start = mid; + start = mid + 1; else /* positive offset */ stop = mid; -- cgit v1.2.3-70-g09d2 From 6c52961743f38747401b47127b82159ab6d8a7a4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 15 Dec 2011 18:38:10 -0500 Subject: NFS: Fix a regression in nfs_file_llseek() After commit 06222e491e663dac939f04b125c9dc52126a75c4 (fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek) the behaviour of llseek() was changed so that it always revalidates the file size. The bug appears to be due to a logic error in the afore-mentioned commit, which always evaluates to 'true'. Reported-by: Roel Kluin Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>=3.1] --- fs/nfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/file.c b/fs/nfs/file.c index eca56d4b39c0..606ef0f20aed 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -147,7 +147,7 @@ static loff_t nfs_file_llseek(struct file *filp, loff_t offset, int origin) * origin == SEEK_END || SEEK_DATA || SEEK_HOLE => we must revalidate * the cached file length */ - if (origin != SEEK_SET || origin != SEEK_CUR) { + if (origin != SEEK_SET && origin != SEEK_CUR) { struct inode *inode = filp->f_mapping->host; int retval = nfs_revalidate_file_size(inode, filp); -- cgit v1.2.3-70-g09d2 From ab2789213d224202237292d78aaa0c386c7b28b2 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 15 Dec 2011 11:47:00 -0800 Subject: sched: Fix select_idle_sibling() regression in selecting an idle SMT sibling Mike Galbraith reported that this recent commit: commit 4dcfe1025b513c2c1da5bf5586adb0e80148f612 Author: Peter Zijlstra Date: Thu Nov 10 13:01:10 2011 +0100 sched: Avoid SMT siblings in select_idle_sibling() if possible stopped selecting an idle SMT sibling when there are no idle cores in a single socket system. Intent of the select_idle_sibling() was to fallback to an idle SMT sibling, if it fails to identify an idle core. But this fallback was not happening on systems where all the scheduler domains had `SD_SHARE_PKG_RESOURCES' flag set. Fix it. Slightly bigger patch of cleaning all these goto's etc is queued up for the next release. Reported-by: Mike Galbraith Reported-by: Alex Shi Signed-off-by: Peter Zijlstra Signed-off-by: Suresh Siddha Link: http://lkml.kernel.org/r/1323978421.1984.244.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar --- kernel/sched_fair.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index a78ed2736ba7..8a39fa3e3c6c 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -2352,13 +2352,11 @@ again: if (!smt && (sd->flags & SD_SHARE_CPUPOWER)) continue; - if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) { - if (!smt) { - smt = 1; - goto again; - } + if (smt && !(sd->flags & SD_SHARE_CPUPOWER)) + break; + + if (!(sd->flags & SD_SHARE_PKG_RESOURCES)) break; - } sg = sd->groups; do { @@ -2378,6 +2376,10 @@ next: sg = sg->next; } while (sg != sd->groups); } + if (!smt) { + smt = 1; + goto again; + } done: rcu_read_unlock(); -- cgit v1.2.3-70-g09d2 From 0999bbe08196cd9459683204974fda4d62a7d1b3 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 28 Nov 2011 12:22:56 -0500 Subject: drm/i915: no-lvds quirk for ASUS AT5NM10T-I https://bugzilla.redhat.com/show_bug.cgi?id=750006 Signed-off-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 42f165a520de..e44191132ac4 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -715,6 +715,14 @@ static const struct dmi_system_id intel_no_lvds[] = { DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"), }, }, + { + .callback = intel_no_lvds_dmi_callback, + .ident = "Asus AT5NM10T-I", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), + DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"), + }, + }, { } /* terminating entry */ }; -- cgit v1.2.3-70-g09d2 From 3573c4103f7a486838bb6b5b8353788103f91802 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 14 Oct 2011 18:16:22 -0300 Subject: drm/i915: set the right SDVO transcoder for CPT v2: add a CPT-specific macro, make code cleaner v3: fix commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41272 Cc: stable@kernel.org Signed-off-by: Paulo Zanoni Reviewed-by: Chris Wilson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_reg.h | 8 ++++---- drivers/gpu/drm/i915/intel_sdvo.c | 8 ++++++-- 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 6ef68c74189d..a26d5b0a3690 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -3303,10 +3303,10 @@ /* or SDVOB */ #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) -#define TRANSCODER_A (0) -#define TRANSCODER_B (1 << 30) -#define TRANSCODER(pipe) ((pipe) << 30) -#define TRANSCODER_MASK (1 << 30) +#define TRANSCODER(pipe) ((pipe) << 30) +#define TRANSCODER_CPT(pipe) ((pipe) << 29) +#define TRANSCODER_MASK (1 << 30) +#define TRANSCODER_MASK_CPT (3 << 29) #define COLOR_FORMAT_8bpc (0) #define COLOR_FORMAT_12bpc (3 << 26) #define SDVOB_HOTPLUG_ENABLE (1 << 23) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 3003fb25aefd..e308d674c669 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1086,8 +1086,12 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, } sdvox |= (9 << 19) | SDVO_BORDER_ENABLE; } - if (intel_crtc->pipe == 1) - sdvox |= SDVO_PIPE_B_SELECT; + + if (INTEL_PCH_TYPE(dev) >= PCH_CPT) + sdvox |= TRANSCODER_CPT(intel_crtc->pipe); + else + sdvox |= TRANSCODER(intel_crtc->pipe); + if (intel_sdvo->has_hdmi_audio) sdvox |= SDVO_AUDIO_ENABLE; -- cgit v1.2.3-70-g09d2 From 03d00ac53f9bcde06ff7e33d6676083c18d569a4 Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 14 Oct 2011 18:17:41 -0300 Subject: drm/i915: add PCH info to i915_capabilities Signed-off-by: Chris Wilson Signed-off-by: Paulo Zanoni Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index d09a6e02dc95..004b048c5192 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -62,6 +62,7 @@ static int i915_capabilities(struct seq_file *m, void *data) const struct intel_device_info *info = INTEL_INFO(dev); seq_printf(m, "gen: %d\n", info->gen); + seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev)); #define B(x) seq_printf(m, #x ": %s\n", yesno(info->x)) B(is_mobile); B(is_i85x); -- cgit v1.2.3-70-g09d2 From 4ed0b577457eb6aeb7cdc7e7316576e63d15abb2 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Thu, 10 Nov 2011 13:55:15 -0200 Subject: drm/i915: prevent division by zero when asking for chipset power This prevents an in-kernel division by zero which happens when we are asking for i915_chipset_val too quickly, or within a race condition between the power monitoring thread and userspace accesses via debugfs. The issue can be reproduced easily via the following command: while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done This is particularly dangerous because it can be triggered by a non-privileged user by just reading the debugfs entry. This issue was also found independently by Konstantin Belousov , who proposed a similar patch. Reported-by: Konstantin Belousov Acked-by: Jesse Barnes Acked-by: Keith Packard Reviewed-by: Chris Wilson Cc: Signed-off-by: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_dma.c | 10 ++++++++++ drivers/gpu/drm/i915/i915_drv.h | 1 + 2 files changed, 11 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index a9533c54c93c..a9ae374861e7 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1454,6 +1454,14 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) diff1 = now - dev_priv->last_time1; + /* Prevent division-by-zero if we are asking too fast. + * Also, we don't get interesting results if we are polling + * faster than once in 10ms, so just return the saved value + * in such cases. + */ + if (diff1 <= 10) + return dev_priv->chipset_power; + count1 = I915_READ(DMIEC); count2 = I915_READ(DDREC); count3 = I915_READ(CSIEC); @@ -1484,6 +1492,8 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv) dev_priv->last_count1 = total_count; dev_priv->last_time1 = now; + dev_priv->chipset_power = ret; + return ret; } diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 8ba88cfc36de..39a72f642b33 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -713,6 +713,7 @@ typedef struct drm_i915_private { u64 last_count1; unsigned long last_time1; + unsigned long chipset_power; u64 last_count2; struct timespec last_time2; unsigned long gfx_power; -- cgit v1.2.3-70-g09d2 From 522200858093a6f31af9830672109f6d9807dd1e Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Mon, 20 Jun 2011 14:45:50 +0100 Subject: drm/i915/sdvo: Include LVDS panels for the IS_DIGITAL check We were checking whether the supplied edid matched the connector it was read from. We do this in case a DDC read returns an EDID for another device on a multifunction or otherwise interesting card. However, we failed to include LVDS as a digital device and so rejecting an otherwise valid EDID. Fixes the detection of the secondary SDVO LVDS panel on the Libretto W105. Signed-off-by: Chris Wilson Reviewed-by: Adam Jackson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=39216 Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_sdvo.c | 28 ++++++++++++++++++++-------- 1 file changed, 20 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e308d674c669..f7b9268df266 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -50,6 +50,7 @@ #define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK) #define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK) #define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK)) +#define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK)) static const char *tv_format_names[] = { @@ -1318,6 +1319,18 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector) return status; } +static bool +intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo, + struct edid *edid) +{ + bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); + bool connector_is_digital = !!IS_DIGITAL(sdvo); + + DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n", + connector_is_digital, monitor_is_digital); + return connector_is_digital == monitor_is_digital; +} + static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector, bool force) { @@ -1362,10 +1375,12 @@ intel_sdvo_detect(struct drm_connector *connector, bool force) if (edid == NULL) edid = intel_sdvo_get_analog_edid(connector); if (edid != NULL) { - if (edid->input & DRM_EDID_INPUT_DIGITAL) - ret = connector_status_disconnected; - else + if (intel_sdvo_connector_matches_edid(intel_sdvo_connector, + edid)) ret = connector_status_connected; + else + ret = connector_status_disconnected; + connector->display_info.raw_edid = NULL; kfree(edid); } else @@ -1406,11 +1421,8 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector) edid = intel_sdvo_get_analog_edid(connector); if (edid != NULL) { - struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector); - bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL); - bool connector_is_digital = !!IS_TMDS(intel_sdvo_connector); - - if (connector_is_digital == monitor_is_digital) { + if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector), + edid)) { drm_mode_connector_update_edid_property(connector, edid); drm_add_edid_modes(connector, edid); } -- cgit v1.2.3-70-g09d2 From 8bc1f85c02a20a59956b00b3acea12c04dce9ae8 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Wed, 23 Nov 2011 16:42:14 -0200 Subject: iommu: Export intel_iommu_enabled to signal when iommu is in use In i915 driver, we do not enable either rc6 or semaphores on SNB when dmar is enabled. The new 'intel_iommu_enabled' variable signals when the iommu code is in operation. Cc: Ted Phelps Cc: Peter Cc: Lukas Hejtmanek Cc: Andrew Lutomirski CC: Daniel Vetter Cc: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/iommu/intel-iommu.c | 5 +++++ include/linux/dma_remapping.h | 2 ++ 2 files changed, 7 insertions(+) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index c0c7820d4c46..8dc19b8f5d45 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -405,6 +405,9 @@ int dmar_disabled = 0; int dmar_disabled = 1; #endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/ +int intel_iommu_enabled = 0; +EXPORT_SYMBOL_GPL(intel_iommu_enabled); + static int dmar_map_gfx = 1; static int dmar_forcedac; static int intel_iommu_strict; @@ -3647,6 +3650,8 @@ int __init intel_iommu_init(void) bus_register_notifier(&pci_bus_type, &device_nb); + intel_iommu_enabled = 1; + return 0; } diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h index ef90cbd8e173..57c9a8ae4f2d 100644 --- a/include/linux/dma_remapping.h +++ b/include/linux/dma_remapping.h @@ -31,6 +31,7 @@ extern void free_dmar_iommu(struct intel_iommu *iommu); extern int iommu_calculate_agaw(struct intel_iommu *iommu); extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu); extern int dmar_disabled; +extern int intel_iommu_enabled; #else static inline int iommu_calculate_agaw(struct intel_iommu *iommu) { @@ -44,6 +45,7 @@ static inline void free_dmar_iommu(struct intel_iommu *iommu) { } #define dmar_disabled (1) +#define intel_iommu_enabled (0) #endif -- cgit v1.2.3-70-g09d2 From c0f372b3746d4ede07b2ace2beabd38d9c045b25 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Wed, 16 Nov 2011 22:24:52 -0800 Subject: drm/i915: By default, enable RC6 on IVB and SNB when reasonable RC6 should always work on IVB, and should work on SNB whenever IO remapping is disabled. RC6 never works on Ironlake. Make the default value for the parameter follow these guidelines. Setting the value to either 0 or 1 will force the specified behavior. Signed-off-by: Keith Packard Reviewed-by: Kenneth Graunke Reviewed-by: Eugeni Dodonov Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567 Cc: Ted Phelps Cc: Peter Cc: Lukas Hejtmanek Cc: Andrew Lutomirski --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/intel_display.c | 33 ++++++++++++++++++++++++++++++--- 3 files changed, 33 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 28836fe72211..47a42eb6cc43 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -63,10 +63,10 @@ module_param_named(semaphores, i915_semaphores, int, 0600); MODULE_PARM_DESC(semaphores, "Use semaphores for inter-ring sync (default: false)"); -unsigned int i915_enable_rc6 __read_mostly = 0; +int i915_enable_rc6 __read_mostly = -1; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); MODULE_PARM_DESC(i915_enable_rc6, - "Enable power-saving render C-state 6 (default: true)"); + "Enable power-saving render C-state 6 (default: -1 (use per-chip default)"); int i915_enable_fbc __read_mostly = -1; module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 39a72f642b33..6bcafb5bf7fe 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1006,7 +1006,7 @@ extern unsigned int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; -extern unsigned int i915_enable_rc6 __read_mostly; +extern int i915_enable_rc6 __read_mostly; extern int i915_enable_fbc __read_mostly; extern bool i915_enable_hangcheck __read_mostly; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 633c69365388..d544de9e6634 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -38,8 +38,8 @@ #include "i915_drv.h" #include "i915_trace.h" #include "drm_dp_helper.h" - #include "drm_crtc_helper.h" +#include #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) @@ -7887,6 +7887,33 @@ void intel_init_emon(struct drm_device *dev) dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK); } +static bool intel_enable_rc6(struct drm_device *dev) +{ + /* + * Respect the kernel parameter if it is set + */ + if (i915_enable_rc6 >= 0) + return i915_enable_rc6; + + /* + * Disable RC6 on Ironlake + */ + if (INTEL_INFO(dev)->gen == 5) + return 0; + + /* + * Enable rc6 on Sandybridge if DMA remapping is disabled + */ + if (INTEL_INFO(dev)->gen == 6) { + DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n", + intel_iommu_enabled ? "true" : "false", + !intel_iommu_enabled ? "en" : "dis"); + return !intel_iommu_enabled; + } + DRM_DEBUG_DRIVER("RC6 enabled\n"); + return 1; +} + void gen6_enable_rps(struct drm_i915_private *dev_priv) { u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP); @@ -7923,7 +7950,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv) I915_WRITE(GEN6_RC6p_THRESHOLD, 100000); I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */ - if (i915_enable_rc6) + if (intel_enable_rc6(dev_priv->dev)) rc6_mask = GEN6_RC_CTL_RC6p_ENABLE | GEN6_RC_CTL_RC6_ENABLE; @@ -8372,7 +8399,7 @@ void ironlake_enable_rc6(struct drm_device *dev) /* rc6 disabled by default due to repeated reports of hanging during * boot and resume. */ - if (!i915_enable_rc6) + if (!intel_enable_rc6(dev)) return; mutex_lock(&dev->struct_mutex); -- cgit v1.2.3-70-g09d2 From 7317c75e66fce0c9f82fbe6f72f7e5256b315422 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Mon, 29 Aug 2011 09:45:28 -0700 Subject: drm/i915: don't set unpin_work if vblank_get fails This fixes a race where we may try to finish a page flip and decrement the refcount even if our vblank_get failed and we ended up with a spurious flip pending interrupt. Fixes https://bugs.freedesktop.org/show_bug.cgi?id=34211. Signed-off-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index d544de9e6634..91b5f8707a62 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -7189,11 +7189,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, work->old_fb_obj = intel_fb->obj; INIT_WORK(&work->work, intel_unpin_work_fn); + ret = drm_vblank_get(dev, intel_crtc->pipe); + if (ret) + goto free_work; + /* We borrow the event spin lock for protecting unpin_work */ spin_lock_irqsave(&dev->event_lock, flags); if (intel_crtc->unpin_work) { spin_unlock_irqrestore(&dev->event_lock, flags); kfree(work); + drm_vblank_put(dev, intel_crtc->pipe); DRM_DEBUG_DRIVER("flip queue: crtc already busy\n"); return -EBUSY; @@ -7212,10 +7217,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, crtc->fb = fb; - ret = drm_vblank_get(dev, intel_crtc->pipe); - if (ret) - goto cleanup_objs; - work->pending_flip_obj = obj; work->enable_stall_check = true; @@ -7238,7 +7239,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, cleanup_pending: atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip); -cleanup_objs: drm_gem_object_unreference(&work->old_fb_obj->base); drm_gem_object_unreference(&obj->base); mutex_unlock(&dev->struct_mutex); @@ -7247,6 +7247,8 @@ cleanup_objs: intel_crtc->unpin_work = NULL; spin_unlock_irqrestore(&dev->event_lock, flags); + drm_vblank_put(dev, intel_crtc->pipe); +free_work: kfree(work); return ret; -- cgit v1.2.3-70-g09d2 From f45b55575cedb7efa782e43f1ea74338456d0381 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Fri, 9 Dec 2011 17:16:37 -0800 Subject: drm/i915: enable semaphores on per-device defaults This adds a default setting for semaphores parameter, and enables semaphores by default on IVB. For now, as semaphores interaction with VTd causes random issues on SNB, we do not enable them by default. But they can still be enabled via the semaphores=1 kernel parameter. v2: enables semaphores on SNB when IO remapping is disabled, with base on Keith Packard patch. CC: Daniel Vetter CC: Ben Widawsky CC: Keith Packard CC: Jesse Barnes CC: Chris Wilson Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862 Reviewed-by: Chris Wilson Reviewed-by: Daniel Vetter Signed-off-by: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 4 ++-- drivers/gpu/drm/i915/i915_drv.h | 2 +- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 19 ++++++++++++++++++- 3 files changed, 21 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 47a42eb6cc43..a1103fc6597d 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -58,10 +58,10 @@ module_param_named(powersave, i915_powersave, int, 0600); MODULE_PARM_DESC(powersave, "Enable powersavings, fbc, downclocking, etc. (default: true)"); -unsigned int i915_semaphores __read_mostly = 0; +int i915_semaphores __read_mostly = -1; module_param_named(semaphores, i915_semaphores, int, 0600); MODULE_PARM_DESC(semaphores, - "Use semaphores for inter-ring sync (default: false)"); + "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))"); int i915_enable_rc6 __read_mostly = -1; module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 6bcafb5bf7fe..554bef7a3b9c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -1002,7 +1002,7 @@ extern int i915_max_ioctl; extern unsigned int i915_fbpercrtc __always_unused; extern int i915_panel_ignore_lid __read_mostly; extern unsigned int i915_powersave __read_mostly; -extern unsigned int i915_semaphores __read_mostly; +extern int i915_semaphores __read_mostly; extern unsigned int i915_lvds_downclock __read_mostly; extern int i915_panel_use_ssc __read_mostly; extern int i915_vbt_sdvo_panel_type __read_mostly; diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 3693e83a97f3..c681dc149d2a 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -32,6 +32,7 @@ #include "i915_drv.h" #include "i915_trace.h" #include "intel_drv.h" +#include struct change_domains { uint32_t invalidate_domains; @@ -746,6 +747,22 @@ i915_gem_execbuffer_flush(struct drm_device *dev, return 0; } +static bool +intel_enable_semaphores(struct drm_device *dev) +{ + if (INTEL_INFO(dev)->gen < 6) + return 0; + + if (i915_semaphores >= 0) + return i915_semaphores; + + /* Enable semaphores on SNB when IO remapping is off */ + if (INTEL_INFO(dev)->gen == 6) + return !intel_iommu_enabled; + + return 1; +} + static int i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj, struct intel_ring_buffer *to) @@ -758,7 +775,7 @@ i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj, return 0; /* XXX gpu semaphores are implicated in various hard hangs on SNB */ - if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores) + if (!intel_enable_semaphores(obj->base.dev)) return i915_gem_object_wait_rendering(obj); idx = intel_ring_sync_index(from, to); -- cgit v1.2.3-70-g09d2 From 3b5c78a35cf7511c15e09a9b0ffab290a42d9bcf Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Tue, 13 Dec 2011 15:41:00 -0800 Subject: drm/i915/dp: Dither down to 6bpc if it makes the mode fit Some active adaptors (VGA usually) only have two lanes at 2.7GHz. That's a maximum pixel clock of 144MHz at 8bpc, but 192MHz at 6bpc. Fixes Asus UX31 panel being black at startup due to no valid modes since dc22ee6fc18ce0f15424e753e8473c306ece95c1. v2: Rebased to current code, resulting in the fix applying to EDP panels as well. Also changed from spatio-temporal to just spatial dithering on pre-ironlake, to be conssitent (and less visual flicker) Signed-off-by: Adam Jackson Signed-off-by: Eric Anholt Tested-by: Eric Anholt Tested-by: Dirk Hohndel Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 22 ++++++++++++++++++++-- drivers/gpu/drm/i915/intel_dp.c | 24 ++++++++++++++++++------ drivers/gpu/drm/i915/intel_drv.h | 1 + 3 files changed, 39 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 91b5f8707a62..d809b038ca88 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4670,6 +4670,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) /** * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send * @crtc: CRTC structure + * @mode: requested mode * * A pipe may be connected to one or more outputs. Based on the depth of the * attached framebuffer, choose a good color depth to use on the pipe. @@ -4681,13 +4682,15 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) * HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc * Displays may support a restricted set as well, check EDID and clamp as * appropriate. + * DP may want to dither down to 6bpc to fit larger modes * * RETURNS: * Dithering requirement (i.e. false if display bpc and pipe bpc match, * true if they don't match). */ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, - unsigned int *pipe_bpp) + unsigned int *pipe_bpp, + struct drm_display_mode *mode) { struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; @@ -4758,6 +4761,11 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, } } + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + DRM_DEBUG_KMS("Dithering DP to 6bpc\n"); + display_bpc = 6; + } + /* * We could just drive the pipe at the highest bpc all the time and * enable dithering as needed, but that costs bandwidth. So choose @@ -5019,6 +5027,16 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, pipeconf &= ~PIPECONF_DOUBLE_WIDE; } + /* default to 8bpc */ + pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN); + if (is_dp) { + if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) { + pipeconf |= PIPECONF_BPP_6 | + PIPECONF_DITHER_EN | + PIPECONF_DITHER_TYPE_SP; + } + } + dpll |= DPLL_VCO_ENABLE; DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); @@ -5480,7 +5498,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* determine panel color depth */ temp = I915_READ(PIPECONF(pipe)); temp &= ~PIPE_BPC_MASK; - dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp); + dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode); switch (pipe_bpp) { case 18: temp |= PIPE_6BPC; diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index 294f55788f0b..92b041b66e49 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -208,13 +208,15 @@ intel_dp_link_clock(uint8_t link_bw) */ static int -intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock) +intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp) { struct drm_crtc *crtc = intel_dp->base.base.crtc; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int bpp = 24; - if (intel_crtc) + if (check_bpp) + bpp = check_bpp; + else if (intel_crtc) bpp = intel_crtc->bpp; return (pixel_clock * bpp + 9) / 10; @@ -233,6 +235,7 @@ intel_dp_mode_valid(struct drm_connector *connector, struct intel_dp *intel_dp = intel_attached_dp(connector); int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp)); int max_lanes = intel_dp_max_lane_count(intel_dp); + int max_rate, mode_rate; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) @@ -242,9 +245,17 @@ intel_dp_mode_valid(struct drm_connector *connector, return MODE_PANEL; } - if (intel_dp_link_required(intel_dp, mode->clock) - > intel_dp_max_data_rate(max_link_clock, max_lanes)) - return MODE_CLOCK_HIGH; + mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0); + max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes); + + if (mode_rate > max_rate) { + mode_rate = intel_dp_link_required(intel_dp, + mode->clock, 18); + if (mode_rate > max_rate) + return MODE_CLOCK_HIGH; + else + mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC; + } if (mode->clock < 10000) return MODE_CLOCK_LOW; @@ -672,6 +683,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, int lane_count, clock; int max_lane_count = intel_dp_max_lane_count(intel_dp); int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0; + int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0; static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) { @@ -689,7 +701,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode, for (clock = 0; clock <= max_clock; clock++) { int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count); - if (intel_dp_link_required(intel_dp, mode->clock) + if (intel_dp_link_required(intel_dp, mode->clock, bpp) <= link_avail) { intel_dp->link_bw = bws[clock]; intel_dp->lane_count = lane_count; diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index bd9a604b73da..a1b4343814e8 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -110,6 +110,7 @@ /* drm_display_mode->private_flags */ #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0) #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT) +#define INTEL_MODE_DP_FORCE_6BPC (0x10) static inline void intel_mode_set_pixel_multiplier(struct drm_display_mode *mode, -- cgit v1.2.3-70-g09d2 From 142349f541d0bb6bc3e0d4563268105aada42b0b Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Fri, 16 Dec 2011 12:32:57 -0500 Subject: btrfs: lower the dirty balance poll interval Tests show that the original large intervals can easily make the dirty limit exceeded on 100 concurrent dd's. So adapt to as large as the next check point selected by the dirty throttling algorithm. Signed-off-by: Wu Fengguang Signed-off-by: Chris Mason --- fs/btrfs/file.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index dafdfa059bf6..52305a885c3f 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1167,6 +1167,8 @@ static noinline ssize_t __btrfs_buffered_write(struct file *file, nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) / PAGE_CACHE_SIZE, PAGE_CACHE_SIZE / (sizeof(struct page *))); + nrptrs = min(nrptrs, current->nr_dirtied_pause - current->nr_dirtied); + nrptrs = max(nrptrs, 8); pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL); if (!pages) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From ed4a51842a9d9e618d4f4c31349b15b974dba5df Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 16 Dec 2011 12:58:39 -0800 Subject: Revert "drm/i915: fix infinite recursion on unbind due to ilk vt-d w/a" This reverts commit eb1711bb94991e93669c5a1b5f84f11be2d51ea1. It blows up the i915 seqno tracking, resulting in the BUG_ON(seqno == 0); in i915_wait_request() triggering, which will cause lock-ups. See for example https://bugs.launchpad.net/ubuntu/+source/linux/+bug/903010 https://lkml.org/lkml/2011/12/14/395 Reported-requested-and-tested-by: Dirk Hohndel Reported-by: Richard Eames Reported-by: Rocko Requin Acked-by: Daniel Vetter Cc: Dave Airlie Cc: Chris Wilson Cc: Keith Packard Cc: Eric Anholt Signed-off-by: Linus Torvalds --- drivers/gpu/drm/i915/i915_gem.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 60ff1b63b568..8359dc777041 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2026,13 +2026,8 @@ i915_wait_request(struct intel_ring_buffer *ring, * to handle this, the waiter on a request often wants an associated * buffer to have made it to the inactive list, and we would need * a separate wait queue to handle that. - * - * To avoid a recursion with the ilk VT-d workaround (that calls - * gpu_idle when unbinding objects with interruptible==false) don't - * retire requests in that case (because it might call unbind if the - * active list holds the last reference to the object). */ - if (ret == 0 && dev_priv->mm.interruptible) + if (ret == 0) i915_gem_retire_requests_ring(ring); return ret; -- cgit v1.2.3-70-g09d2 From 384703b8e6cd4c8ef08512e596024e028c91c339 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 16 Dec 2011 18:36:26 -0800 Subject: Linux 3.2-rc6 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index d1ea73f74c2f..a43733df3978 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 2 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v1.2.3-70-g09d2 From 37de03ea1246c8280f6c8c6f61ea98973e9b9448 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 9 Dec 2011 20:55:03 +0800 Subject: i2c: i2c-s3c2410: Add a cpu_relax() to busy wait for bus idle Be a bit more friendly. Signed-off-by: Mark Brown Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 2754cef86a06..37b2de106808 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -534,6 +534,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, /* first, try busy waiting briefly */ do { + cpu_relax(); iicstat = readl(i2c->regs + S3C2410_IICSTAT); } while ((iicstat & S3C2410_IICSTAT_START) && --spins); -- cgit v1.2.3-70-g09d2 From 8ebe661dd2ab16e2e9c272ed5c86019c7407b9a1 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Fri, 9 Dec 2011 15:33:55 +0530 Subject: i2c-s3c2410: Fix return code of s3c24xx_i2c_parse_dt_gpio s3c24xx_i2c_parse_dt_gpio is called when cfg_gpio is not defined in the platform data of the i2c device. When DT is not enabled, the above function always returns -EINVAL. Since there can be some i2c devices which don't need to configure any gpio lines, the probe of such devices would fail here. Changing the default return value to success would fix this issue. Signed-off-by: Tushar Behera Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-s3c2410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 37b2de106808..4c1718081685 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -787,7 +787,7 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) #else static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c) { - return -EINVAL; + return 0; } static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c) -- cgit v1.2.3-70-g09d2 From 1d5a34fe990c9e2e2f672b238ad881d0d4ed376b Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Tue, 6 Dec 2011 10:25:58 -0800 Subject: I2C: OMAP: fix FIFO usage for OMAP4 Currently the fifo depth is set to zero for OMAP4 which disables the FIFO usage. This patch enables the FIFO usage for I2C transactions on OMAP4 also. Tested on omap4430 and 3430. Tested-and-Reported-by: Nishanth Menon Signed-off-by: Shubhrajyoti D Signed-off-by: Kevin Hilman Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-omap.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index a43d0023446a..fa23faa20f0e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1047,13 +1047,14 @@ omap_i2c_probe(struct platform_device *pdev) * size. This is to ensure that we can handle the status on int * call back latencies. */ - if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) { - dev->fifo_size = 0; + + dev->fifo_size = (dev->fifo_size / 2); + + if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) dev->b_hw = 0; /* Disable hardware fixes */ - } else { - dev->fifo_size = (dev->fifo_size / 2); + else dev->b_hw = 1; /* Enable hardware fixes */ - } + /* calculate wakeup latency constraint for MPU */ if (dev->set_mpu_wkup_lat != NULL) dev->latency = (1000000 * dev->fifo_size) / -- cgit v1.2.3-70-g09d2 From 0d5fb5ea7d0e6bc84a523c39a666d7eb1a7e43de Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Tue, 29 Nov 2011 15:19:10 +0800 Subject: i2c-eg20t: correct the driver init order of pch_i2c_probe() Before registering an adapter to i2c subsystem, we need make sure driver is ready for incoming i2c xfer, becasue the i2c_add_adapter() may trigger a i2c device driver's proble function which may start some real i2c xfer. I met this issue when integrating a TSC2007 i2c touch screen device with the i2c-eg20t driver. This patch will call request_irq() and hw init before calling i2c_add_adapter(). Signed-off-by: Feng Tang Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-eg20t.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 8cebef49aeac..18936ac9d51c 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -893,6 +893,13 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, /* Set the number of I2C channel instance */ adap_info->ch_num = id->driver_data; + ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, + KBUILD_MODNAME, adap_info); + if (ret) { + pch_pci_err(pdev, "request_irq FAILED\n"); + goto err_request_irq; + } + for (i = 0; i < adap_info->ch_num; i++) { pch_adap = &adap_info->pch_data[i].pch_adapter; adap_info->pch_i2c_suspended = false; @@ -910,28 +917,23 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev, pch_adap->dev.parent = &pdev->dev; + pch_i2c_init(&adap_info->pch_data[i]); ret = i2c_add_adapter(pch_adap); if (ret) { pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i); - goto err_i2c_add_adapter; + goto err_add_adapter; } - - pch_i2c_init(&adap_info->pch_data[i]); - } - ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED, - KBUILD_MODNAME, adap_info); - if (ret) { - pch_pci_err(pdev, "request_irq FAILED\n"); - goto err_i2c_add_adapter; } pci_set_drvdata(pdev, adap_info); pch_pci_dbg(pdev, "returns %d.\n", ret); return 0; -err_i2c_add_adapter: +err_add_adapter: for (j = 0; j < i; j++) i2c_del_adapter(&adap_info->pch_data[j].pch_adapter); + free_irq(pdev->irq, adap_info); +err_request_irq: pci_iounmap(pdev, base_addr); err_pci_iomap: pci_release_regions(pdev); -- cgit v1.2.3-70-g09d2 From 497f16f21a04060098c0da6ed522fbcafb90c0db Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Sat, 17 Dec 2011 18:33:37 -0800 Subject: pci: Fix hotplug of Express Module with pci bridges I noticed that hotplug of one setup does not work with recent change in pci tree. After checking the bridge conf setup, I noticed that the bridges get assigned but do not get enabled. The reason is the following commit, while simply ignores bridge resources when enabling a pci device: | commit bbef98ab0f019f1b0c25c1acdf1683c68933d41b | Author: Ram Pai | Date: Sun Nov 6 10:33:10 2011 +0800 | | PCI: defer enablement of SRIOV BARS |... | NOTE: Note, there is subtle change in the pci_enable_device() API. Any | driver that depends on SRIOV BARS to be enabled in pci_enable_device() | can fail. Put back bridge resource and ROM resource checking to fix the problem. That should fix regression like BIOS does not assign correct resource to bridge. Discussion can be found at: http://www.spinics.net/lists/linux-pci/msg12874.html Signed-off-by: Yinghai Lu Acked-by: Jesse Barnes Signed-off-by: Linus Torvalds --- drivers/pci/pci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index faccb8937706..6d4a5319148d 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1129,7 +1129,11 @@ static int __pci_enable_device_flags(struct pci_dev *dev, if (atomic_add_return(1, &dev->enable_cnt) > 1) return 0; /* already enabled */ - for (i = 0; i < PCI_ROM_RESOURCE; i++) + /* only skip sriov related */ + for (i = 0; i <= PCI_ROM_RESOURCE; i++) + if (dev->resource[i].flags & flags) + bars |= (1 << i); + for (i = PCI_BRIDGE_RESOURCES; i < DEVICE_COUNT_RESOURCE; i++) if (dev->resource[i].flags & flags) bars |= (1 << i); -- cgit v1.2.3-70-g09d2 From 36e999a83a4a4badd389901eb6d23a30e199b8db Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Thu, 8 Dec 2011 17:23:21 -0800 Subject: Bluetooth: Prevent uninitialized data access in L2CAP configuration When configuring an ERTM or streaming mode connection, remote devices are expected to send an RFC option in a successful config response. A misbehaving remote device might not send an RFC option, and the L2CAP code should not access uninitialized data in this case. Signed-off-by: Mat Martineau Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/l2cap_core.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 5ea94a1eecf2..17b5b1cd9657 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -2152,7 +2152,7 @@ static int l2cap_parse_conf_rsp(struct l2cap_chan *chan, void *rsp, int len, voi void *ptr = req->data; int type, olen; unsigned long val; - struct l2cap_conf_rfc rfc; + struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC }; BT_DBG("chan %p, rsp %p, len %d, req %p", chan, rsp, len, data); @@ -2271,6 +2271,16 @@ static void l2cap_conf_rfc_get(struct l2cap_chan *chan, void *rsp, int len) } } + /* Use sane default values in case a misbehaving remote device + * did not send an RFC option. + */ + rfc.mode = chan->mode; + rfc.retrans_timeout = cpu_to_le16(L2CAP_DEFAULT_RETRANS_TO); + rfc.monitor_timeout = cpu_to_le16(L2CAP_DEFAULT_MONITOR_TO); + rfc.max_pdu_size = cpu_to_le16(chan->imtu); + + BT_ERR("Expected RFC option was not found, using defaults"); + done: switch (rfc.mode) { case L2CAP_MODE_ERTM: -- cgit v1.2.3-70-g09d2 From 79e654787c67f6b05f73366ff8ccac72ba7249e6 Mon Sep 17 00:00:00 2001 From: Mat Martineau Date: Tue, 6 Dec 2011 16:23:26 -0800 Subject: Bluetooth: Clear RFCOMM session timer when disconnecting last channel When the last RFCOMM data channel is closed, a timer is normally set up to disconnect the control channel at a later time. If the control channel disconnect command is sent with the timer pending, the timer needs to be cancelled. If the timer is not cancelled in this situation, the reference counting logic for the RFCOMM session does not work correctly when the remote device closes the L2CAP connection. The session is freed at the wrong time, leading to a kernel panic. Signed-off-by: Mat Martineau Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan --- net/bluetooth/rfcomm/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index 4e32e18211f9..2d28dfe98389 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -1146,6 +1146,7 @@ static int rfcomm_recv_ua(struct rfcomm_session *s, u8 dlci) if (list_empty(&s->dlcs)) { s->state = BT_DISCONN; rfcomm_send_disc(s, 0); + rfcomm_session_clear_timer(s); } break; -- cgit v1.2.3-70-g09d2 From d7660918fce210f421cc58c060ca3de71e4ffd37 Mon Sep 17 00:00:00 2001 From: "Gustavo F. Padovan" Date: Sun, 18 Dec 2011 22:33:30 -0200 Subject: Revert "Bluetooth: Revert: Fix L2CAP connection establishment" This reverts commit 4dff523a913197e3314c7b0d08734ab037709093. It was reported that this patch cause issues when trying to connect to legacy devices so reverting it. Reported-by: David Fries Signed-off-by: Gustavo F. Padovan --- net/bluetooth/hci_conn.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index e0af7237cd92..c1c597e3e198 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -673,7 +673,7 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) goto encrypt; auth: - if (test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) + if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) return 0; if (!hci_conn_auth(conn, sec_level, auth_type)) -- cgit v1.2.3-70-g09d2 From 8015e3defe491d305b20c2e64b154b999e6da065 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Mon, 19 Dec 2011 17:57:52 +0800 Subject: ALSA: atmel/ac97c: using software reset instead hardware reset if not available Signed-off-by: Bo Shen Acked-by: Nicolas Ferre Signed-off-by: Takashi Iwai --- sound/atmel/ac97c.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/sound/atmel/ac97c.c b/sound/atmel/ac97c.c index 6e5addeb236b..73516f69ac7c 100644 --- a/sound/atmel/ac97c.c +++ b/sound/atmel/ac97c.c @@ -899,6 +899,10 @@ static void atmel_ac97c_reset(struct atmel_ac97c *chip) /* AC97 v2.2 specifications says minimum 1 us. */ udelay(2); gpio_set_value(chip->reset_pin, 1); + } else { + ac97c_writel(chip, MR, AC97C_MR_WRST | AC97C_MR_ENA); + udelay(2); + ac97c_writel(chip, MR, AC97C_MR_ENA); } } -- cgit v1.2.3-70-g09d2 From b1b73d095084e754562961c443aa8f6587a55f8e Mon Sep 17 00:00:00 2001 From: Kusanagi Kouichi Date: Mon, 19 Dec 2011 18:13:19 +0900 Subject: time/clocksource: Fix kernel-doc warnings Fix various KernelDoc build warnings. Signed-off-by: Kusanagi Kouichi Cc: John Stultz Link: http://lkml.kernel.org/r/20111219091320.0D5AF6FC03D@msa105.auone-net.jp Signed-off-by: Ingo Molnar --- include/linux/clocksource.h | 11 ++++++++--- kernel/time/clocksource.c | 12 +++++++++--- 2 files changed, 17 insertions(+), 6 deletions(-) diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index c86c940d1de3..081147da0564 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -71,7 +71,7 @@ struct timecounter { /** * cyclecounter_cyc2ns - converts cycle counter cycles to nanoseconds - * @tc: Pointer to cycle counter. + * @cc: Pointer to cycle counter. * @cycles: Cycles * * XXX - This could use some mult_lxl_ll() asm optimization. Same code @@ -114,7 +114,7 @@ extern u64 timecounter_read(struct timecounter *tc); * time base as values returned by * timecounter_read() * @tc: Pointer to time counter. - * @cycle: a value returned by tc->cc->read() + * @cycle_tstamp: a value returned by tc->cc->read() * * Cycle counts that are converted correctly as long as they * fall into the interval [-1/2 max cycle count, +1/2 max cycle count], @@ -156,11 +156,12 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * @mult: cycle to nanosecond multiplier * @shift: cycle to nanosecond divisor (power of two) * @max_idle_ns: max idle time permitted by the clocksource (nsecs) - * @maxadj maximum adjustment value to mult (~11%) + * @maxadj: maximum adjustment value to mult (~11%) * @flags: flags describing special properties * @archdata: arch-specific data * @suspend: suspend function for the clocksource, if necessary * @resume: resume function for the clocksource, if necessary + * @cycle_last: most recent cycle counter value seen by ::read() */ struct clocksource { /* @@ -187,6 +188,7 @@ struct clocksource { void (*suspend)(struct clocksource *cs); void (*resume)(struct clocksource *cs); + /* private: */ #ifdef CONFIG_CLOCKSOURCE_WATCHDOG /* Watchdog related data, used by the framework */ struct list_head wd_list; @@ -261,6 +263,9 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) /** * clocksource_cyc2ns - converts clocksource cycles to nanoseconds + * @cycles: cycles + * @mult: cycle to nanosecond multiplier + * @shift: cycle to nanosecond divisor (power of two) * * Converts cycles to nanoseconds, using the given mult and shift. * diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c index da2f760e780c..d3ad022136e5 100644 --- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -647,7 +647,7 @@ static void clocksource_enqueue(struct clocksource *cs) /** * __clocksource_updatefreq_scale - Used update clocksource with new freq - * @t: clocksource to be registered + * @cs: clocksource to be registered * @scale: Scale factor multiplied against freq to get clocksource hz * @freq: clocksource frequency (cycles per second) divided by scale * @@ -699,7 +699,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); /** * __clocksource_register_scale - Used to install new clocksources - * @t: clocksource to be registered + * @cs: clocksource to be registered * @scale: Scale factor multiplied against freq to get clocksource hz * @freq: clocksource frequency (cycles per second) divided by scale * @@ -727,7 +727,7 @@ EXPORT_SYMBOL_GPL(__clocksource_register_scale); /** * clocksource_register - Used to install new clocksources - * @t: clocksource to be registered + * @cs: clocksource to be registered * * Returns -EBUSY if registration fails, zero otherwise. */ @@ -761,6 +761,8 @@ static void __clocksource_change_rating(struct clocksource *cs, int rating) /** * clocksource_change_rating - Change the rating of a registered clocksource + * @cs: clocksource to be changed + * @rating: new rating */ void clocksource_change_rating(struct clocksource *cs, int rating) { @@ -772,6 +774,7 @@ EXPORT_SYMBOL(clocksource_change_rating); /** * clocksource_unregister - remove a registered clocksource + * @cs: clocksource to be unregistered */ void clocksource_unregister(struct clocksource *cs) { @@ -787,6 +790,7 @@ EXPORT_SYMBOL(clocksource_unregister); /** * sysfs_show_current_clocksources - sysfs interface for current clocksource * @dev: unused + * @attr: unused * @buf: char buffer to be filled with clocksource list * * Provides sysfs interface for listing current clocksource. @@ -807,6 +811,7 @@ sysfs_show_current_clocksources(struct sys_device *dev, /** * sysfs_override_clocksource - interface for manually overriding clocksource * @dev: unused + * @attr: unused * @buf: name of override clocksource * @count: length of buffer * @@ -842,6 +847,7 @@ static ssize_t sysfs_override_clocksource(struct sys_device *dev, /** * sysfs_show_available_clocksources - sysfs interface for listing clocksource * @dev: unused + * @attr: unused * @buf: char buffer to be filled with clocksource list * * Provides sysfs interface for listing registered clocksources -- cgit v1.2.3-70-g09d2 From c32987918efaa6949c5b2f3e43b654a742b18f7d Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Tue, 13 Dec 2011 00:37:56 +0100 Subject: mtd: plat_ram: call mtd_device_register only if partition data exists mtd_device_parse_register() registers the device as a whole if no partition data is passed so there is no reason to call mtd_device_register() after that. Signed-off-by: Ilya Yanok Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/maps/plat-ram.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/maps/plat-ram.c b/drivers/mtd/maps/plat-ram.c index 94f553489725..45876d0e5b8e 100644 --- a/drivers/mtd/maps/plat-ram.c +++ b/drivers/mtd/maps/plat-ram.c @@ -227,10 +227,14 @@ static int platram_probe(struct platform_device *pdev) if (!err) dev_info(&pdev->dev, "registered mtd device\n"); - /* add the whole device. */ - err = mtd_device_register(info->mtd, NULL, 0); - if (err) - dev_err(&pdev->dev, "failed to register the entire device\n"); + if (pdata->nr_partitions) { + /* add the whole device. */ + err = mtd_device_register(info->mtd, NULL, 0); + if (err) { + dev_err(&pdev->dev, + "failed to register the entire device\n"); + } + } return err; -- cgit v1.2.3-70-g09d2 From 7422ba5343b8c1dbe1a517d0fcc15e7d671ca960 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 19 Dec 2011 13:45:01 +0200 Subject: usb: gadget: epautoconf: do not change number of streams We should not change gadget driver's descriptors just because we think it's right to do so. There are several of reasons which would support this statement but it suffices to say that this was probably never tested because it updates bmAttributes without asking the driver if it's ok to do so. This means that e.g. on UASP gadget it would enable stream support even for the command endpoint which must not have stream support enabled. In fact, this change is fixing the bug introduced by commit a59d6b9 (usb: gadget: add streams support to the gadget framework) which was caught when testing UASP gadget with dwc3 driver. Cc: Tatyana Brokhman Signed-off-by: Felipe Balbi --- drivers/usb/gadget/epautoconf.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 596a0b464e61..4dff83d2f265 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -130,9 +130,6 @@ ep_matches ( num_req_streams = ep_comp->bmAttributes & 0x1f; if (num_req_streams > ep->max_streams) return 0; - /* Update the ep_comp descriptor if needed */ - if (num_req_streams != ep->max_streams) - ep_comp->bmAttributes = ep->max_streams; } } -- cgit v1.2.3-70-g09d2 From ebd4c6f6261c96d1cf9f004965384d57c4202fd6 Mon Sep 17 00:00:00 2001 From: Thomas Hellstrom Date: Mon, 28 Nov 2011 13:19:08 +0100 Subject: vmwgfx: Use the revised fifo hw version register when present The driver implements the needed resource management required to use that register. Signed-off-by: Thomas Hellstrom Reviewed-by: Jakob Bornecrantz Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c | 8 +++++++- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 10 ++++++++-- 2 files changed, 15 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c index 03bbc2a6f9a7..a0c2f12b1e1b 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c @@ -33,6 +33,7 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv) { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; uint32_t fifo_min, hwversion; + const struct vmw_fifo_state *fifo = &dev_priv->fifo; if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO)) return false; @@ -41,7 +42,12 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv) if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int)) return false; - hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + hwversion = ioread32(fifo_mem + + ((fifo->capabilities & + SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ? + SVGA_FIFO_3D_HWVERSION_REVISED : + SVGA_FIFO_3D_HWVERSION)); + if (hwversion == 0) return false; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 5ff561d4e0b4..1edb63ec3f34 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -58,8 +58,14 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data, case DRM_VMW_PARAM_FIFO_HW_VERSION: { __le32 __iomem *fifo_mem = dev_priv->mmio_virt; - - param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION); + const struct vmw_fifo_state *fifo = &dev_priv->fifo; + + param->value = + ioread32(fifo_mem + + ((fifo->capabilities & + SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ? + SVGA_FIFO_3D_HWVERSION_REVISED : + SVGA_FIFO_3D_HWVERSION)); break; } default: -- cgit v1.2.3-70-g09d2 From ef5ab24bd3373941bd27e371512c0009eb11581c Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:09 +0100 Subject: vmwgfx: Remove dmabuf check in present ioctl Doesn't protect any error code and only gets in the way of debugging. Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c index 1edb63ec3f34..66917c6c3813 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c @@ -172,13 +172,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data, ret = -EINVAL; goto out_no_fb; } - vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj)); - if (!vfb->dmabuf) { - DRM_ERROR("Framebuffer not dmabuf backed.\n"); - ret = -EINVAL; - goto out_no_fb; - } ret = ttm_read_lock(&vmaster->lock, true); if (unlikely(ret != 0)) -- cgit v1.2.3-70-g09d2 From 6a91d97e02d7efde955c25a5b0fbf950cd2a6efa Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:10 +0100 Subject: vmwgfx: Refactor cursor update Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 66 ++++++++++++++++++++++--------------- 1 file changed, 39 insertions(+), 27 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index 37d40545ed77..bee671624a98 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -82,6 +82,43 @@ int vmw_cursor_update_image(struct vmw_private *dev_priv, return 0; } +int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv, + struct vmw_dma_buffer *dmabuf, + u32 width, u32 height, + u32 hotspotX, u32 hotspotY) +{ + struct ttm_bo_kmap_obj map; + unsigned long kmap_offset; + unsigned long kmap_num; + void *virtual; + bool dummy; + int ret; + + kmap_offset = 0; + kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT; + + ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0); + if (unlikely(ret != 0)) { + DRM_ERROR("reserve failed\n"); + return -EINVAL; + } + + ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map); + if (unlikely(ret != 0)) + goto err_unreserve; + + virtual = ttm_kmap_obj_virtual(&map, &dummy); + ret = vmw_cursor_update_image(dev_priv, virtual, width, height, + hotspotX, hotspotY); + + ttm_bo_kunmap(&map); +err_unreserve: + ttm_bo_unreserve(&dmabuf->base); + + return ret; +} + + void vmw_cursor_update_position(struct vmw_private *dev_priv, bool show, int x, int y) { @@ -146,36 +183,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, vmw_cursor_update_image(dev_priv, surface->snooper.image, 64, 64, du->hotspot_x, du->hotspot_y); } else if (dmabuf) { - struct ttm_bo_kmap_obj map; - unsigned long kmap_offset; - unsigned long kmap_num; - void *virtual; - bool dummy; - /* vmw_user_surface_lookup takes one reference */ du->cursor_dmabuf = dmabuf; - kmap_offset = 0; - kmap_num = (64*64*4) >> PAGE_SHIFT; - - ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0); - if (unlikely(ret != 0)) { - DRM_ERROR("reserve failed\n"); - return -EINVAL; - } - - ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map); - if (unlikely(ret != 0)) - goto err_unreserve; - - virtual = ttm_kmap_obj_virtual(&map, &dummy); - vmw_cursor_update_image(dev_priv, virtual, 64, 64, - du->hotspot_x, du->hotspot_y); - - ttm_bo_kunmap(&map); -err_unreserve: - ttm_bo_unreserve(&dmabuf->base); - + ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, width, height, + du->hotspot_x, du->hotspot_y); } else { vmw_cursor_update_position(dev_priv, false, 0, 0); return 0; -- cgit v1.2.3-70-g09d2 From 551a6697d08f92a311d6adbf8d03af2bc7f9e2ee Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:11 +0100 Subject: vmwgfx: Add helper function to get surface or dmabuf Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 5 +++++ drivers/gpu/drm/vmwgfx/vmwgfx_resource.c | 23 +++++++++++++++++++++++ 2 files changed, 28 insertions(+) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 8cca91a93bde..dc279706ca70 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -390,6 +390,11 @@ extern int vmw_context_check(struct vmw_private *dev_priv, struct ttm_object_file *tfile, int id, struct vmw_resource **p_res); +extern int vmw_user_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out_surf, + struct vmw_dma_buffer **out_buf); extern void vmw_surface_res_free(struct vmw_resource *res); extern int vmw_surface_init(struct vmw_private *dev_priv, struct vmw_surface *srf, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 86c5e4cceb31..1c7f09e26819 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1190,6 +1190,29 @@ void vmw_resource_unreserve(struct list_head *list) write_unlock(lock); } +/** + * Helper function that looks either a surface or dmabuf. + * + * The pointer this pointed at by out_surf and out_buf needs to be null. + */ +int vmw_user_lookup_handle(struct vmw_private *dev_priv, + struct ttm_object_file *tfile, + uint32_t handle, + struct vmw_surface **out_surf, + struct vmw_dma_buffer **out_buf) +{ + int ret; + + BUG_ON(*out_surf || *out_buf); + + ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, out_surf); + if (!ret) + return 0; + + ret = vmw_user_dmabuf_lookup(tfile, handle, out_buf); + return ret; +} + int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv, struct ttm_object_file *tfile, -- cgit v1.2.3-70-g09d2 From e7ac9211f29f2fc2e7d11586a33267d2a26d3f2f Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:12 +0100 Subject: vmwgfx: Refactor kms code to use vmw_user_lookup_handle helper Signed-off-by: Jakob Bornecrantz Signed-off-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 98 ++++++++++++++----------------------- 1 file changed, 37 insertions(+), 61 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index bee671624a98..ac24cfd431b5 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -147,24 +147,21 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv, return -EINVAL; if (handle) { - ret = vmw_user_surface_lookup_handle(dev_priv, tfile, - handle, &surface); - if (!ret) { - if (!surface->snooper.image) { - DRM_ERROR("surface not suitable for cursor\n"); - vmw_surface_unreference(&surface); - return -EINVAL; - } - } else { - ret = vmw_user_dmabuf_lookup(tfile, - handle, &dmabuf); - if (ret) { - DRM_ERROR("failed to find surface or dmabuf: %i\n", ret); - return -EINVAL; - } + ret = vmw_user_lookup_handle(dev_priv, tfile, + handle, &surface, &dmabuf); + if (ret) { + DRM_ERROR("failed to find surface or dmabuf: %i\n", ret); + return -EINVAL; } } + /* need to do this before taking down old image */ + if (surface && !surface->snooper.image) { + DRM_ERROR("surface not suitable for cursor\n"); + vmw_surface_unreference(&surface); + return -EINVAL; + } + /* takedown old cursor */ if (du->cursor_surface) { du->cursor_surface->snooper.crtc = NULL; @@ -568,6 +565,10 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv, * Sanity checks. */ + /* Surface must be marked as a scanout. */ + if (unlikely(!surface->scanout)) + return -EINVAL; + if (unlikely(surface->mip_levels[0] != 1 || surface->num_sizes != 1 || surface->sizes[0].width < mode_cmd->width || @@ -1045,46 +1046,29 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev, return ERR_PTR(-ENOENT); } - /** - * End conditioned code. - */ - - ret = vmw_user_surface_lookup_handle(dev_priv, tfile, - mode_cmd->handle, &surface); + /* returns either a dmabuf or surface */ + ret = vmw_user_lookup_handle(dev_priv, tfile, + mode_cmd->handle, + &surface, &bo); if (ret) - goto try_dmabuf; - - if (!surface->scanout) - goto err_not_scanout; - - ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, surface, - &vfb, mode_cmd); - - /* vmw_user_surface_lookup takes one ref so does new_fb */ - vmw_surface_unreference(&surface); - - if (ret) { - DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); - ttm_base_object_unref(&user_obj); - return ERR_PTR(ret); - } else - vfb->user_obj = user_obj; - return &vfb->base; - -try_dmabuf: - DRM_INFO("%s: trying buffer\n", __func__); - - ret = vmw_user_dmabuf_lookup(tfile, mode_cmd->handle, &bo); - if (ret) { - DRM_ERROR("failed to find buffer: %i\n", ret); - return ERR_PTR(-ENOENT); - } - - ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb, - mode_cmd); + goto err_out; + + /* Create the new framebuffer depending one what we got back */ + if (bo) + ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb, + mode_cmd); + else if (surface) + ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, + surface, &vfb, mode_cmd); + else + BUG(); - /* vmw_user_dmabuf_lookup takes one ref so does new_fb */ - vmw_dmabuf_unreference(&bo); +err_out: + /* vmw_user_lookup_handle takes one ref so does new_fb */ + if (bo) + vmw_dmabuf_unreference(&bo); + if (surface) + vmw_surface_unreference(&surface); if (ret) { DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret); @@ -1094,14 +1078,6 @@ try_dmabuf: vfb->user_obj = user_obj; return &vfb->base; - -err_not_scanout: - DRM_ERROR("surface not marked as scanout\n"); - /* vmw_user_surface_lookup takes one ref */ - vmw_surface_unreference(&surface); - ttm_base_object_unref(&user_obj); - - return ERR_PTR(-EINVAL); } static struct drm_mode_config_funcs vmw_kms_funcs = { -- cgit v1.2.3-70-g09d2 From 203dc2201326fa64411158c84ab0745546300310 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:13 +0100 Subject: vmwgfx: Do better culling of presents Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 37 +++++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index ac24cfd431b5..d31ae338cfc1 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -1098,6 +1098,7 @@ int vmw_kms_present(struct vmw_private *dev_priv, size_t fifo_size; int i, k, num_units; int ret = 0; /* silence warning */ + int left, right, top, bottom; struct { SVGA3dCmdHeader header; @@ -1122,30 +1123,42 @@ int vmw_kms_present(struct vmw_private *dev_priv, return -ENOMEM; } + left = clips->x; + right = clips->x + clips->w; + top = clips->y; + bottom = clips->y + clips->h; + + for (i = 1; i < num_clips; i++) { + left = min_t(int, left, (int)clips[i].x); + right = max_t(int, right, (int)clips[i].x + clips[i].w); + top = min_t(int, top, (int)clips[i].y); + bottom = max_t(int, bottom, (int)clips[i].y + clips[i].h); + } + /* only need to do this once */ memset(cmd, 0, fifo_size); cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN); cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); - cmd->body.srcRect.left = 0; - cmd->body.srcRect.right = surface->sizes[0].width; - cmd->body.srcRect.top = 0; - cmd->body.srcRect.bottom = surface->sizes[0].height; + cmd->body.srcRect.left = left; + cmd->body.srcRect.right = right; + cmd->body.srcRect.top = top; + cmd->body.srcRect.bottom = bottom; blits = (SVGASignedRect *)&cmd[1]; for (i = 0; i < num_clips; i++) { - blits[i].left = clips[i].x; - blits[i].right = clips[i].x + clips[i].w; - blits[i].top = clips[i].y; - blits[i].bottom = clips[i].y + clips[i].h; + blits[i].left = clips[i].x - left; + blits[i].right = clips[i].x + clips[i].w - left; + blits[i].top = clips[i].y - top; + blits[i].bottom = clips[i].y + clips[i].h - top; } for (k = 0; k < num_units; k++) { struct vmw_display_unit *unit = units[k]; - int clip_x1 = destX - unit->crtc.x; - int clip_y1 = destY - unit->crtc.y; - int clip_x2 = clip_x1 + surface->sizes[0].width; - int clip_y2 = clip_y1 + surface->sizes[0].height; + int clip_x1 = left + destX - unit->crtc.x; + int clip_y1 = top + destY - unit->crtc.y; + int clip_x2 = right + destX - unit->crtc.x; + int clip_y2 = bottom + destY - unit->crtc.y; /* skip any crtcs that misses the clip region */ if (clip_x1 >= unit->crtc.mode.hdisplay || -- cgit v1.2.3-70-g09d2 From bfc2638dc05f2b27538e40821fdbc8399730b1ea Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:14 +0100 Subject: vmwgfx: Resend the cursor after legacy modeset Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 5 +++++ drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c | 22 +++++++++++++++++++++- 2 files changed, 26 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index af8e6e5bd964..e1cb8556355f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -62,9 +62,14 @@ struct vmw_framebuffer { int vmw_cursor_update_image(struct vmw_private *dev_priv, u32 *image, u32 width, u32 height, u32 hotspotX, u32 hotspotY); +int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv, + struct vmw_dma_buffer *dmabuf, + u32 width, u32 height, + u32 hotspotX, u32 hotspotY); void vmw_cursor_update_position(struct vmw_private *dev_priv, bool show, int x, int y); + /** * Base class display unit. * diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c index 90c5e3928491..8f8dbd43c33d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c @@ -74,9 +74,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv) { struct vmw_legacy_display *lds = dev_priv->ldu_priv; struct vmw_legacy_display_unit *entry; + struct vmw_display_unit *du = NULL; struct drm_framebuffer *fb = NULL; struct drm_crtc *crtc = NULL; - int i = 0; + int i = 0, ret; /* If there is no display topology the host just assumes * that the guest will set the same layout as the host. @@ -129,6 +130,25 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv) lds->last_num_active = lds->num_active; + + /* Find the first du with a cursor. */ + list_for_each_entry(entry, &lds->active, active) { + du = &entry->base; + + if (!du->cursor_dmabuf) + continue; + + ret = vmw_cursor_update_dmabuf(dev_priv, + du->cursor_dmabuf, + 64, 64, + du->hotspot_x, + du->hotspot_y); + if (ret == 0) + break; + + DRM_ERROR("Could not update cursor image\n"); + } + return 0; } -- cgit v1.2.3-70-g09d2 From 6abff3c78051e40130a1c653f874fb12b9d40254 Mon Sep 17 00:00:00 2001 From: Jakob Bornecrantz Date: Mon, 28 Nov 2011 13:19:15 +0100 Subject: vmwgfx: Clip cliprects against screen boundaries in present and dirty Signed-off-by: Jakob Bornecrantz Reviewed-by: Thomas Hellstrom Signed-off-by: Dave Airlie --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 209 +++++++++++++++++++++++++++--------- 1 file changed, 156 insertions(+), 53 deletions(-) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index d31ae338cfc1..8aa1dbb45c67 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -31,6 +31,44 @@ /* Might need a hrtimer here? */ #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1) + +struct vmw_clip_rect { + int x1, x2, y1, y2; +}; + +/** + * Clip @num_rects number of @rects against @clip storing the + * results in @out_rects and the number of passed rects in @out_num. + */ +void vmw_clip_cliprects(struct drm_clip_rect *rects, + int num_rects, + struct vmw_clip_rect clip, + SVGASignedRect *out_rects, + int *out_num) +{ + int i, k; + + for (i = 0, k = 0; i < num_rects; i++) { + int x1 = max_t(int, clip.x1, rects[i].x1); + int y1 = max_t(int, clip.y1, rects[i].y1); + int x2 = min_t(int, clip.x2, rects[i].x2); + int y2 = min_t(int, clip.y2, rects[i].y2); + + if (x1 >= x2) + continue; + if (y1 >= y2) + continue; + + out_rects[k].left = x1; + out_rects[k].top = y1; + out_rects[k].right = x2; + out_rects[k].bottom = y2; + k++; + } + + *out_num = k; +} + void vmw_display_unit_cleanup(struct vmw_display_unit *du) { if (du->cursor_surface) @@ -386,8 +424,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, struct drm_clip_rect *clips, unsigned num_clips, int inc) { - struct drm_clip_rect *clips_ptr; struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *clips_ptr; + struct drm_clip_rect *tmp; struct drm_crtc *crtc; size_t fifo_size; int i, num_units; @@ -400,7 +439,6 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, } *cmd; SVGASignedRect *blits; - num_units = 0; list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list, head) { @@ -411,13 +449,24 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, BUG_ON(!clips || !num_clips); + tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL); + if (unlikely(tmp == NULL)) { + DRM_ERROR("Temporary cliprect memory alloc failed.\n"); + return -ENOMEM; + } + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips; cmd = kzalloc(fifo_size, GFP_KERNEL); if (unlikely(cmd == NULL)) { DRM_ERROR("Temporary fifo memory alloc failed.\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_tmp; } + /* setup blits pointer */ + blits = (SVGASignedRect *)&cmd[1]; + + /* initial clip region */ left = clips->x1; right = clips->x2; top = clips->y1; @@ -443,45 +492,60 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, cmd->body.srcRect.bottom = bottom; clips_ptr = clips; - blits = (SVGASignedRect *)&cmd[1]; for (i = 0; i < num_clips; i++, clips_ptr += inc) { - blits[i].left = clips_ptr->x1 - left; - blits[i].right = clips_ptr->x2 - left; - blits[i].top = clips_ptr->y1 - top; - blits[i].bottom = clips_ptr->y2 - top; + tmp[i].x1 = clips_ptr->x1 - left; + tmp[i].x2 = clips_ptr->x2 - left; + tmp[i].y1 = clips_ptr->y1 - top; + tmp[i].y2 = clips_ptr->y2 - top; } /* do per unit writing, reuse fifo for each */ for (i = 0; i < num_units; i++) { struct vmw_display_unit *unit = units[i]; - int clip_x1 = left - unit->crtc.x; - int clip_y1 = top - unit->crtc.y; - int clip_x2 = right - unit->crtc.x; - int clip_y2 = bottom - unit->crtc.y; + struct vmw_clip_rect clip; + int num; + + clip.x1 = left - unit->crtc.x; + clip.y1 = top - unit->crtc.y; + clip.x2 = right - unit->crtc.x; + clip.y2 = bottom - unit->crtc.y; /* skip any crtcs that misses the clip region */ - if (clip_x1 >= unit->crtc.mode.hdisplay || - clip_y1 >= unit->crtc.mode.vdisplay || - clip_x2 <= 0 || clip_y2 <= 0) + if (clip.x1 >= unit->crtc.mode.hdisplay || + clip.y1 >= unit->crtc.mode.vdisplay || + clip.x2 <= 0 || clip.y2 <= 0) continue; + /* + * In order for the clip rects to be correctly scaled + * the src and dest rects needs to be the same size. + */ + cmd->body.destRect.left = clip.x1; + cmd->body.destRect.right = clip.x2; + cmd->body.destRect.top = clip.y1; + cmd->body.destRect.bottom = clip.y2; + + /* create a clip rect of the crtc in dest coords */ + clip.x2 = unit->crtc.mode.hdisplay - clip.x1; + clip.y2 = unit->crtc.mode.vdisplay - clip.y1; + clip.x1 = 0 - clip.x1; + clip.y1 = 0 - clip.y1; + /* need to reset sid as it is changed by execbuf */ cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle); - cmd->body.destScreenId = unit->unit; - /* - * The blit command is a lot more resilient then the - * readback command when it comes to clip rects. So its - * okay to go out of bounds. - */ + /* clip and write blits to cmd stream */ + vmw_clip_cliprects(tmp, num_clips, clip, blits, &num); - cmd->body.destRect.left = clip_x1; - cmd->body.destRect.right = clip_x2; - cmd->body.destRect.top = clip_y1; - cmd->body.destRect.bottom = clip_y2; + /* if no cliprects hit skip this */ + if (num == 0) + continue; + /* recalculate package length */ + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num; + cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, fifo_size, 0, NULL); @@ -489,7 +553,10 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv, break; } + kfree(cmd); +out_free_tmp: + kfree(tmp); return ret; } @@ -795,6 +862,7 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv, int clip_y1 = clips_ptr->y1 - unit->crtc.y; int clip_x2 = clips_ptr->x2 - unit->crtc.x; int clip_y2 = clips_ptr->y2 - unit->crtc.y; + int move_x, move_y; /* skip any crtcs that misses the clip region */ if (clip_x1 >= unit->crtc.mode.hdisplay || @@ -802,12 +870,21 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv, clip_x2 <= 0 || clip_y2 <= 0) continue; + /* clip size to crtc size */ + clip_x2 = min_t(int, clip_x2, unit->crtc.mode.hdisplay); + clip_y2 = min_t(int, clip_y2, unit->crtc.mode.vdisplay); + + /* translate both src and dest to bring clip into screen */ + move_x = min_t(int, clip_x1, 0); + move_y = min_t(int, clip_y1, 0); + + /* actual translate done here */ blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN; blits[hit_num].body.destScreenId = unit->unit; - blits[hit_num].body.srcOrigin.x = clips_ptr->x1; - blits[hit_num].body.srcOrigin.y = clips_ptr->y1; - blits[hit_num].body.destRect.left = clip_x1; - blits[hit_num].body.destRect.top = clip_y1; + blits[hit_num].body.srcOrigin.x = clips_ptr->x1 - move_x; + blits[hit_num].body.srcOrigin.y = clips_ptr->y1 - move_y; + blits[hit_num].body.destRect.left = clip_x1 - move_x; + blits[hit_num].body.destRect.top = clip_y1 - move_y; blits[hit_num].body.destRect.right = clip_x2; blits[hit_num].body.destRect.bottom = clip_y2; hit_num++; @@ -1094,6 +1171,7 @@ int vmw_kms_present(struct vmw_private *dev_priv, uint32_t num_clips) { struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS]; + struct drm_clip_rect *tmp; struct drm_crtc *crtc; size_t fifo_size; int i, k, num_units; @@ -1116,11 +1194,18 @@ int vmw_kms_present(struct vmw_private *dev_priv, BUG_ON(surface == NULL); BUG_ON(!clips || !num_clips); + tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL); + if (unlikely(tmp == NULL)) { + DRM_ERROR("Temporary cliprect memory alloc failed.\n"); + return -ENOMEM; + } + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips; cmd = kmalloc(fifo_size, GFP_KERNEL); if (unlikely(cmd == NULL)) { DRM_ERROR("Failed to allocate temporary fifo memory.\n"); - return -ENOMEM; + ret = -ENOMEM; + goto out_free_tmp; } left = clips->x; @@ -1138,50 +1223,66 @@ int vmw_kms_present(struct vmw_private *dev_priv, /* only need to do this once */ memset(cmd, 0, fifo_size); cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN); - cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); + + blits = (SVGASignedRect *)&cmd[1]; cmd->body.srcRect.left = left; cmd->body.srcRect.right = right; cmd->body.srcRect.top = top; cmd->body.srcRect.bottom = bottom; - blits = (SVGASignedRect *)&cmd[1]; for (i = 0; i < num_clips; i++) { - blits[i].left = clips[i].x - left; - blits[i].right = clips[i].x + clips[i].w - left; - blits[i].top = clips[i].y - top; - blits[i].bottom = clips[i].y + clips[i].h - top; + tmp[i].x1 = clips[i].x - left; + tmp[i].x2 = clips[i].x + clips[i].w - left; + tmp[i].y1 = clips[i].y - top; + tmp[i].y2 = clips[i].y + clips[i].h - top; } for (k = 0; k < num_units; k++) { struct vmw_display_unit *unit = units[k]; - int clip_x1 = left + destX - unit->crtc.x; - int clip_y1 = top + destY - unit->crtc.y; - int clip_x2 = right + destX - unit->crtc.x; - int clip_y2 = bottom + destY - unit->crtc.y; + struct vmw_clip_rect clip; + int num; + + clip.x1 = left + destX - unit->crtc.x; + clip.y1 = top + destY - unit->crtc.y; + clip.x2 = right + destX - unit->crtc.x; + clip.y2 = bottom + destY - unit->crtc.y; /* skip any crtcs that misses the clip region */ - if (clip_x1 >= unit->crtc.mode.hdisplay || - clip_y1 >= unit->crtc.mode.vdisplay || - clip_x2 <= 0 || clip_y2 <= 0) + if (clip.x1 >= unit->crtc.mode.hdisplay || + clip.y1 >= unit->crtc.mode.vdisplay || + clip.x2 <= 0 || clip.y2 <= 0) continue; + /* + * In order for the clip rects to be correctly scaled + * the src and dest rects needs to be the same size. + */ + cmd->body.destRect.left = clip.x1; + cmd->body.destRect.right = clip.x2; + cmd->body.destRect.top = clip.y1; + cmd->body.destRect.bottom = clip.y2; + + /* create a clip rect of the crtc in dest coords */ + clip.x2 = unit->crtc.mode.hdisplay - clip.x1; + clip.y2 = unit->crtc.mode.vdisplay - clip.y1; + clip.x1 = 0 - clip.x1; + clip.y1 = 0 - clip.y1; + /* need to reset sid as it is changed by execbuf */ cmd->body.srcImage.sid = sid; - cmd->body.destScreenId = unit->unit; - /* - * The blit command is a lot more resilient then the - * readback command when it comes to clip rects. So its - * okay to go out of bounds. - */ + /* clip and write blits to cmd stream */ + vmw_clip_cliprects(tmp, num_clips, clip, blits, &num); - cmd->body.destRect.left = clip_x1; - cmd->body.destRect.right = clip_x2; - cmd->body.destRect.top = clip_y1; - cmd->body.destRect.bottom = clip_y2; + /* if no cliprects hit skip this */ + if (num == 0) + continue; + /* recalculate package length */ + fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num; + cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header)); ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd, fifo_size, 0, NULL); @@ -1190,6 +1291,8 @@ int vmw_kms_present(struct vmw_private *dev_priv, } kfree(cmd); +out_free_tmp: + kfree(tmp); return ret; } -- cgit v1.2.3-70-g09d2 From 12275dd4b747f5d87fa36229774d76bca8e63068 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Mon, 19 Dec 2011 09:30:35 -0500 Subject: Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel" This reverts commit ddacf5ef684a655abe2bb50c4b2a5b72ae0d5e05. As when booting the kernel under Amazon EC2 as an HVM guest it ends up hanging during startup. Reverting this we loose the fix for kexec booting to the crash kernels. Fixes Canonical BZ #901305 (http://bugs.launchpad.net/bugs/901305) Tested-by: Alessandro Salvatori Reported-by: Stefan Bader Acked-by: Ian Campbell Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xenbus/xenbus_xs.c | 13 ------------- include/xen/interface/io/xs_wire.h | 3 +-- 2 files changed, 1 insertion(+), 15 deletions(-) diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c index b3b8f2f3ad10..ede860f921df 100644 --- a/drivers/xen/xenbus/xenbus_xs.c +++ b/drivers/xen/xenbus/xenbus_xs.c @@ -621,15 +621,6 @@ static struct xenbus_watch *find_watch(const char *token) return NULL; } -static void xs_reset_watches(void) -{ - int err; - - err = xs_error(xs_single(XBT_NIL, XS_RESET_WATCHES, "", NULL)); - if (err && err != -EEXIST) - printk(KERN_WARNING "xs_reset_watches failed: %d\n", err); -} - /* Register callback to watch this node. */ int register_xenbus_watch(struct xenbus_watch *watch) { @@ -906,9 +897,5 @@ int xs_init(void) if (IS_ERR(task)) return PTR_ERR(task); - /* shutdown watches for kexec boot */ - if (xen_hvm_domain()) - xs_reset_watches(); - return 0; } diff --git a/include/xen/interface/io/xs_wire.h b/include/xen/interface/io/xs_wire.h index f0b6890370be..f6f07aa35af5 100644 --- a/include/xen/interface/io/xs_wire.h +++ b/include/xen/interface/io/xs_wire.h @@ -29,8 +29,7 @@ enum xsd_sockmsg_type XS_IS_DOMAIN_INTRODUCED, XS_RESUME, XS_SET_TARGET, - XS_RESTRICT, - XS_RESET_WATCHES + XS_RESTRICT }; #define XS_WRITE_NONE "NONE" -- cgit v1.2.3-70-g09d2 From 913050b91eb94f194392dd797b1ff3779f606ac0 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Mon, 19 Dec 2011 16:38:30 +0100 Subject: oprofile: Fix uninitialized memory access when writing to writing to oprofilefs If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Change oprofilefs_ulong_from_user()'s interface to return count on success. Thus, we are able to return early if count equals zero which avoids using *val uninitialized. Fixing all users of oprofilefs_ulong_ from_user(). This follows write syscall implementation when count is zero: "If count is zero ... [and if] no errors are detected, 0 will be returned without causing any other effect." (man 2 write) Reported-By: Mike Waychison Signed-off-by: Robert Richter Cc: Andrew Morton Cc: Cc: oprofile-list Link: http://lkml.kernel.org/r/20111219153830.GH16765@erda.amd.com Signed-off-by: Ingo Molnar --- arch/s390/oprofile/init.c | 2 +- drivers/oprofile/oprofile_files.c | 7 ++++--- drivers/oprofile/oprofilefs.c | 11 +++++++++-- 3 files changed, 14 insertions(+), 6 deletions(-) diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index 6efc18b5e60a..bd58b72454cf 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -88,7 +88,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (oprofile_started) diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c index 89f63456646f..84a208dbed93 100644 --- a/drivers/oprofile/oprofile_files.c +++ b/drivers/oprofile/oprofile_files.c @@ -45,7 +45,7 @@ static ssize_t timeout_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_timeout(val); @@ -84,7 +84,7 @@ static ssize_t depth_write(struct file *file, char const __user *buf, size_t cou return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_ulong(&oprofile_backtrace_depth, val); @@ -141,9 +141,10 @@ static ssize_t enable_write(struct file *file, char const __user *buf, size_t co return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; + retval = 0; if (val) retval = oprofile_start(); else diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c index d0de6cc2d7a5..2f0aa0f700e6 100644 --- a/drivers/oprofile/oprofilefs.c +++ b/drivers/oprofile/oprofilefs.c @@ -60,6 +60,13 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t cou } +/* + * Note: If oprofilefs_ulong_from_user() returns 0, then *val remains + * unchanged and might be uninitialized. This follows write syscall + * implementation when count is zero: "If count is zero ... [and if] + * no errors are detected, 0 will be returned without causing any + * other effect." (man 2 write) + */ int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count) { char tmpbuf[TMPBUFSIZE]; @@ -79,7 +86,7 @@ int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_ raw_spin_lock_irqsave(&oprofilefs_lock, flags); *val = simple_strtoul(tmpbuf, NULL, 0); raw_spin_unlock_irqrestore(&oprofilefs_lock, flags); - return 0; + return count; } @@ -99,7 +106,7 @@ static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_ return -EINVAL; retval = oprofilefs_ulong_from_user(&value, buf, count); - if (retval) + if (retval <= 0) return retval; retval = oprofile_set_ulong(file->private_data, value); -- cgit v1.2.3-70-g09d2 From e0197aae59e55c06db172bfbe1a1cdb8c0e1cab3 Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 15 Dec 2011 11:36:43 -0800 Subject: cgroups: fix a css_set not found bug in cgroup_attach_proc There is a BUG when migrating a PF_EXITING proc. Since css_set_prefetch() is not called for the PF_EXITING case, find_existing_css_set() will return NULL inside cgroup_task_migrate() causing a BUG. This bug is easy to reproduce. Create a zombie and echo its pid to cgroup.procs. $ cat zombie.c \#include int main() { if (fork()) pause(); return 0; } $ We are hitting this bug pretty regularly on ChromeOS. This bug is already fixed by Tejun Heo's cgroup patchset which is targetted for the next merge window: https://lkml.org/lkml/2011/11/1/356 I've create a smaller patch here which just fixes this bug so that a fix can be merged into the current release and stable. Signed-off-by: Mandeep Singh Baines Downstream-Bug-Report: http://crosbug.com/23953 Reviewed-by: Li Zefan Signed-off-by: Tejun Heo Cc: containers@lists.linux-foundation.org Cc: cgroups@vger.kernel.org Cc: stable@kernel.org Cc: KAMEZAWA Hiroyuki Cc: Frederic Weisbecker Cc: Oleg Nesterov Cc: Andrew Morton Cc: Paul Menage Cc: Olof Johansson --- kernel/cgroup.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/kernel/cgroup.c b/kernel/cgroup.c index d9d5648f3cdc..a184470cf9b5 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2098,11 +2098,6 @@ int cgroup_attach_proc(struct cgroup *cgrp, struct task_struct *leader) continue; /* get old css_set pointer */ task_lock(tsk); - if (tsk->flags & PF_EXITING) { - /* ignore this task if it's going away */ - task_unlock(tsk); - continue; - } oldcg = tsk->cgroups; get_css_set(oldcg); task_unlock(tsk); -- cgit v1.2.3-70-g09d2 From 04ded1672402577cd3f390c764f3046cc704a42a Mon Sep 17 00:00:00 2001 From: Sean Hefty Date: Tue, 6 Dec 2011 21:17:11 +0000 Subject: RDMA/cma: Verify private data length private_data_len is defined as a u8. If the user specifies a large private_data size (> 220 bytes), we will calculate a total length that exceeds 255, resulting in private_data_len wrapping back to 0. This can lead to overwriting random kernel memory. Avoid this by verifying that the resulting size fits into a u8. Reported-by: B. Thery Addresses: Signed-off-by: Sean Hefty Signed-off-by: Roland Dreier --- drivers/infiniband/core/cma.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index 75ff821c0af0..d0d4aa9f4802 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -2513,6 +2513,9 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv, req.private_data_len = sizeof(struct cma_hdr) + conn_param->private_data_len; + if (req.private_data_len < conn_param->private_data_len) + return -EINVAL; + req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC); if (!req.private_data) return -ENOMEM; @@ -2562,6 +2565,9 @@ static int cma_connect_ib(struct rdma_id_private *id_priv, memset(&req, 0, sizeof req); offset = cma_user_data_offset(id_priv->id.ps); req.private_data_len = offset + conn_param->private_data_len; + if (req.private_data_len < conn_param->private_data_len) + return -EINVAL; + private_data = kzalloc(req.private_data_len, GFP_ATOMIC); if (!private_data) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 29d1b16145e78e0f4af54751965c4a09e83bd872 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Fri, 2 Dec 2011 12:41:30 -0500 Subject: IB/qib: Correct sense on freectxts increment and decrement Commit 53ab1c64983 ("IB/qib: Correct nfreectxts for multiple HCAs") reversed the increments and decrements of dd->nfreectxts. Fix it. Reviewed-by: Ram Vepa Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- drivers/infiniband/hw/qib/qib_file_ops.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/qib/qib_file_ops.c b/drivers/infiniband/hw/qib/qib_file_ops.c index 574600ef5b42..a7403248d83d 100644 --- a/drivers/infiniband/hw/qib/qib_file_ops.c +++ b/drivers/infiniband/hw/qib/qib_file_ops.c @@ -1285,7 +1285,7 @@ static int setup_ctxt(struct qib_pportdata *ppd, int ctxt, strlcpy(rcd->comm, current->comm, sizeof(rcd->comm)); ctxt_fp(fp) = rcd; qib_stats.sps_ctxts++; - dd->freectxts++; + dd->freectxts--; ret = 0; goto bail; @@ -1794,7 +1794,7 @@ static int qib_close(struct inode *in, struct file *fp) if (dd->pageshadow) unlock_expected_tids(rcd); qib_stats.sps_ctxts--; - dd->freectxts--; + dd->freectxts++; } mutex_unlock(&qib_mutex); -- cgit v1.2.3-70-g09d2 From 96f1f05af76b601ab21a7dc603ae0a1cea4efc3d Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Fri, 16 Dec 2011 07:53:18 -0800 Subject: iwlwifi: update SCD BC table for all SCD queues Since we configure all the queues as CHAINABLE, we need to update the byte count for all the queues, not only the AGGREGATABLE ones. Not doing so can confuse the SCD and make the fw assert. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-trans-pcie.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c index ce918980e977..5f17ab8e76ba 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie.c @@ -1197,9 +1197,7 @@ static int iwl_trans_pcie_tx(struct iwl_trans *trans, struct sk_buff *skb, iwl_print_hex_dump(trans, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len); /* Set up entry for this TFD in Tx byte-count array */ - if (is_agg) - iwl_trans_txq_update_byte_cnt_tbl(trans, txq, - le16_to_cpu(tx_cmd->len)); + iwl_trans_txq_update_byte_cnt_tbl(trans, txq, le16_to_cpu(tx_cmd->len)); dma_sync_single_for_device(bus(trans)->dev, txcmd_phys, firstlen, DMA_BIDIRECTIONAL); -- cgit v1.2.3-70-g09d2 From a03ffcf873fe0f2565386ca8ef832144c42e67fa Mon Sep 17 00:00:00 2001 From: Markus Kötter Date: Sat, 17 Dec 2011 11:39:08 +0000 Subject: net: bpf_jit: fix an off-one bug in x86_64 cond jump target MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit x86 jump instruction size is 2 or 5 bytes (near/long jump), not 2 or 6 bytes. In case a conditional jump is followed by a long jump, conditional jump target is one byte past the start of target instruction. Signed-off-by: Markus Kötter Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- arch/x86/net/bpf_jit_comp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index bfab3fa10edc..7b65f752c5f8 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -568,8 +568,8 @@ cond_branch: f_offset = addrs[i + filter[i].jf] - addrs[i]; break; } if (filter[i].jt != 0) { - if (filter[i].jf) - t_offset += is_near(f_offset) ? 2 : 6; + if (filter[i].jf && f_offset) + t_offset += is_near(f_offset) ? 2 : 5; EMIT_COND_JMP(t_op, t_offset); if (filter[i].jf) EMIT_JMP(f_offset); -- cgit v1.2.3-70-g09d2 From 9cef310fcdee12b49b8b4c96fd8f611c8873d284 Mon Sep 17 00:00:00 2001 From: Alex Juncu Date: Thu, 15 Dec 2011 23:01:25 +0000 Subject: llc: llc_cmsg_rcv was getting called after sk_eat_skb. Received non stream protocol packets were calling llc_cmsg_rcv that used a skb after that skb was released by sk_eat_skb. This caused received STP packets to generate kernel panics. Signed-off-by: Alexandru Juncu Signed-off-by: Kunjan Naik Signed-off-by: David S. Miller --- net/llc/af_llc.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c index dfd3a648a551..a18e6c3d36e3 100644 --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -833,15 +833,15 @@ static int llc_ui_recvmsg(struct kiocb *iocb, struct socket *sock, copied += used; len -= used; + /* For non stream protcols we get one packet per recvmsg call */ + if (sk->sk_type != SOCK_STREAM) + goto copy_uaddr; + if (!(flags & MSG_PEEK)) { sk_eat_skb(sk, skb, 0); *seq = 0; } - /* For non stream protcols we get one packet per recvmsg call */ - if (sk->sk_type != SOCK_STREAM) - goto copy_uaddr; - /* Partial read */ if (used + offset < skb->len) continue; @@ -857,6 +857,12 @@ copy_uaddr: } if (llc_sk(sk)->cmsg_flags) llc_cmsg_rcv(msg, skb); + + if (!(flags & MSG_PEEK)) { + sk_eat_skb(sk, skb, 0); + *seq = 0; + } + goto out; } -- cgit v1.2.3-70-g09d2 From 2ca6cf06d988fea21e812a86be79353352677c9c Mon Sep 17 00:00:00 2001 From: françois romieu Date: Thu, 15 Dec 2011 08:37:43 +0000 Subject: r8169: fix Config2 MSIEnable bit setting. The MSIEnable bit is only available for the 8169. Avoid Config2 writes for the post-8169 8168 and 810x. Reported-by: Su Kang Yin Signed-off-by: Francois Romieu Cc: Hayes Wang Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index 67bf07819992..c8f47f17186f 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -477,7 +477,6 @@ enum rtl_register_content { /* Config1 register p.24 */ LEDS1 = (1 << 7), LEDS0 = (1 << 6), - MSIEnable = (1 << 5), /* Enable Message Signaled Interrupt */ Speed_down = (1 << 4), MEMMAP = (1 << 3), IOMAP = (1 << 2), @@ -485,6 +484,7 @@ enum rtl_register_content { PMEnable = (1 << 0), /* Power Management Enable */ /* Config2 register p. 25 */ + MSIEnable = (1 << 5), /* 8169 only. Reserved in the 8168. */ PCI_Clock_66MHz = 0x01, PCI_Clock_33MHz = 0x00, @@ -3426,22 +3426,24 @@ static const struct rtl_cfg_info { }; /* Cfg9346_Unlock assumed. */ -static unsigned rtl_try_msi(struct pci_dev *pdev, void __iomem *ioaddr, +static unsigned rtl_try_msi(struct rtl8169_private *tp, const struct rtl_cfg_info *cfg) { + void __iomem *ioaddr = tp->mmio_addr; unsigned msi = 0; u8 cfg2; cfg2 = RTL_R8(Config2) & ~MSIEnable; if (cfg->features & RTL_FEATURE_MSI) { - if (pci_enable_msi(pdev)) { - dev_info(&pdev->dev, "no MSI. Back to INTx.\n"); + if (pci_enable_msi(tp->pci_dev)) { + netif_info(tp, hw, tp->dev, "no MSI. Back to INTx.\n"); } else { cfg2 |= MSIEnable; msi = RTL_FEATURE_MSI; } } - RTL_W8(Config2, cfg2); + if (tp->mac_version <= RTL_GIGA_MAC_VER_06) + RTL_W8(Config2, cfg2); return msi; } @@ -4077,7 +4079,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->features |= RTL_FEATURE_WOL; if ((RTL_R8(Config5) & (UWF | BWF | MWF)) != 0) tp->features |= RTL_FEATURE_WOL; - tp->features |= rtl_try_msi(pdev, ioaddr, cfg); + tp->features |= rtl_try_msi(tp, cfg); RTL_W8(Cfg9346, Cfg9346_Lock); if (rtl_tbi_enabled(tp)) { -- cgit v1.2.3-70-g09d2 From 13f541c10b30fc6529200d7f9a0073217709622f Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 19 Dec 2011 22:07:58 +0100 Subject: x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT When printing the code bytes in show_registers(), the markers around the byte at the fault address could make the printk() format string look like a valid log level and facility code. This would prevent this byte from being printed and result in a spurious newline: [ 7555.765589] Code: 8b 32 e9 94 00 00 00 81 7d 00 ff 00 00 00 0f 87 96 00 00 00 48 8b 83 c0 00 00 00 44 89 e2 44 89 e6 48 89 df 48 8b 80 d8 02 00 00 [ 7555.765683] 8b 48 28 48 89 d0 81 e2 ff 0f 00 00 48 c1 e8 0c 48 c1 e0 04 Add KERN_CONT where needed, and elsewhere in show_registers() for consistency. Signed-off-by: Clemens Ladisch Link: http://lkml.kernel.org/r/4EEFA7AE.9020407@ladisch.de Signed-off-by: H. Peter Anvin --- arch/x86/kernel/dumpstack_32.c | 8 ++++---- arch/x86/kernel/dumpstack_64.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 3b97a80ce329..c99f9ed013d5 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad EIP value."); + printk(KERN_CONT " Bad EIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 19853ad8afc5..6d728d9284bd 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs) for (i = 0; i < code_len; i++, ip++) { if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { - printk(" Bad RIP value."); + printk(KERN_CONT " Bad RIP value."); break; } if (ip == (u8 *)regs->ip) - printk("<%02x> ", c); + printk(KERN_CONT "<%02x> ", c); else - printk("%02x ", c); + printk(KERN_CONT "%02x ", c); } } - printk("\n"); + printk(KERN_CONT "\n"); } int is_valid_bugaddr(unsigned long ip) -- cgit v1.2.3-70-g09d2 From 2692ba61a82203404abd7dd2a027bda962861f74 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Fri, 16 Dec 2011 12:44:15 +0000 Subject: sctp: fix incorrect overflow check on autoclose Commit 8ffd3208 voids the previous patches f6778aab and 810c0719 for limiting the autoclose value. If userspace passes in -1 on 32-bit platform, the overflow check didn't work and autoclose would be set to 0xffffffff. This patch defines a max_autoclose (in seconds) for limiting the value and exposes it through sysctl, with the following intentions. 1) Avoid overflowing autoclose * HZ. 2) Keep the default autoclose bound consistent across 32- and 64-bit platforms (INT_MAX / HZ in this patch). 3) Keep the autoclose value consistent between setsockopt() and getsockopt() calls. Suggested-by: Vlad Yasevich Signed-off-by: Xi Wang Signed-off-by: David S. Miller --- include/net/sctp/structs.h | 4 ++++ net/sctp/associola.c | 2 +- net/sctp/protocol.c | 3 +++ net/sctp/socket.c | 2 -- net/sctp/sysctl.c | 13 +++++++++++++ 5 files changed, 21 insertions(+), 3 deletions(-) diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index e90e7a9935dd..a15432da27c3 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -241,6 +241,9 @@ extern struct sctp_globals { * bits is an indicator of when to send and window update SACK. */ int rwnd_update_shift; + + /* Threshold for autoclose timeout, in seconds. */ + unsigned long max_autoclose; } sctp_globals; #define sctp_rto_initial (sctp_globals.rto_initial) @@ -281,6 +284,7 @@ extern struct sctp_globals { #define sctp_auth_enable (sctp_globals.auth_enable) #define sctp_checksum_disable (sctp_globals.checksum_disable) #define sctp_rwnd_upd_shift (sctp_globals.rwnd_update_shift) +#define sctp_max_autoclose (sctp_globals.max_autoclose) /* SCTP Socket type: UDP or TCP style. */ typedef enum { diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 152b5b3c3fff..acd2edbc073e 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -173,7 +173,7 @@ static struct sctp_association *sctp_association_init(struct sctp_association *a asoc->timeouts[SCTP_EVENT_TIMEOUT_HEARTBEAT] = 0; asoc->timeouts[SCTP_EVENT_TIMEOUT_SACK] = asoc->sackdelay; asoc->timeouts[SCTP_EVENT_TIMEOUT_AUTOCLOSE] = - (unsigned long)sp->autoclose * HZ; + min_t(unsigned long, sp->autoclose, sctp_max_autoclose) * HZ; /* Initializes the timers */ for (i = SCTP_EVENT_TIMEOUT_NONE; i < SCTP_NUM_TIMEOUT_TYPES; ++i) diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 61b9fca5a173..6f6ad8686833 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -1285,6 +1285,9 @@ SCTP_STATIC __init int sctp_init(void) sctp_max_instreams = SCTP_DEFAULT_INSTREAMS; sctp_max_outstreams = SCTP_DEFAULT_OUTSTREAMS; + /* Initialize maximum autoclose timeout. */ + sctp_max_autoclose = INT_MAX / HZ; + /* Initialize handle used for association ids. */ idr_init(&sctp_assocs_id); diff --git a/net/sctp/socket.c b/net/sctp/socket.c index 13bf5fcdbff1..54a7cd2fdd7a 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -2200,8 +2200,6 @@ static int sctp_setsockopt_autoclose(struct sock *sk, char __user *optval, return -EINVAL; if (copy_from_user(&sp->autoclose, optval, optlen)) return -EFAULT; - /* make sure it won't exceed MAX_SCHEDULE_TIMEOUT */ - sp->autoclose = min_t(long, sp->autoclose, MAX_SCHEDULE_TIMEOUT / HZ); return 0; } diff --git a/net/sctp/sysctl.c b/net/sctp/sysctl.c index 6b3952961b85..60ffbd067ff7 100644 --- a/net/sctp/sysctl.c +++ b/net/sctp/sysctl.c @@ -53,6 +53,10 @@ static int sack_timer_min = 1; static int sack_timer_max = 500; static int addr_scope_max = 3; /* check sctp_scope_policy_t in include/net/sctp/constants.h for max entries */ static int rwnd_scale_max = 16; +static unsigned long max_autoclose_min = 0; +static unsigned long max_autoclose_max = + (MAX_SCHEDULE_TIMEOUT / HZ > UINT_MAX) + ? UINT_MAX : MAX_SCHEDULE_TIMEOUT / HZ; extern long sysctl_sctp_mem[3]; extern int sysctl_sctp_rmem[3]; @@ -258,6 +262,15 @@ static ctl_table sctp_table[] = { .extra1 = &one, .extra2 = &rwnd_scale_max, }, + { + .procname = "max_autoclose", + .data = &sctp_max_autoclose, + .maxlen = sizeof(unsigned long), + .mode = 0644, + .proc_handler = &proc_doulongvec_minmax, + .extra1 = &max_autoclose_min, + .extra2 = &max_autoclose_max, + }, { /* sentinel */ } }; -- cgit v1.2.3-70-g09d2 From 7746ab0abb512826540a9a0c917519d11a7bf392 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Sun, 18 Dec 2011 10:02:04 +0000 Subject: davinci-cpdma: fix locking issue in cpdma_chan_stop Free the channel lock before calling __cpdma_chan_process to prevent dead lock. Signed-off-by: Ilya Yanok Tested-by: Ameya Palande <2ameya@gmail.com> Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_cpdma.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/ti/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c index dca9d3369cdd..c97d2f590855 100644 --- a/drivers/net/ethernet/ti/davinci_cpdma.c +++ b/drivers/net/ethernet/ti/davinci_cpdma.c @@ -836,11 +836,13 @@ int cpdma_chan_stop(struct cpdma_chan *chan) chan_write(chan, cp, CPDMA_TEARDOWN_VALUE); /* handle completed packets */ + spin_unlock_irqrestore(&chan->lock, flags); do { ret = __cpdma_chan_process(chan); if (ret < 0) break; } while ((ret & CPDMA_DESC_TD_COMPLETE) == 0); + spin_lock_irqsave(&chan->lock, flags); /* remaining packets haven't been tx/rx'ed, clean them up */ while (chan->head) { -- cgit v1.2.3-70-g09d2 From e8303a3b2196272c3eb994d0fd1a189a958a2bdd Mon Sep 17 00:00:00 2001 From: Aurelien Jacobs Date: Fri, 16 Dec 2011 10:49:22 +0000 Subject: asix: new device id Adds the device id needed for the USB Ethernet Adapter delivered by ASUS with their Zenbook. Signed-off-by: Aurelien Jacobs Acked-by: Grant Grundler Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index e6fed4d4cb77..e95f0e60a9bc 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1655,6 +1655,10 @@ static const struct usb_device_id products [] = { // ASIX 88772a USB_DEVICE(0x0db0, 0xa877), .driver_info = (unsigned long) &ax88772_info, +}, { + // Asus USB Ethernet Adapter + USB_DEVICE (0x0b95, 0x7e2b), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v1.2.3-70-g09d2 From 29495aa04a30c21565243c5b9c028510446d242c Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Thu, 3 Nov 2011 11:09:45 +0100 Subject: mmc: sdhci: remove "state" argument from sdhci_suspend_host Drop the "state" argument from sdhci_suspend_host. Its only user is the PCI glue; this allows to move all SDHCI glues to use dev_pm_ops instead. Signed-off-by: Manuel Lauss Acked-by: Adrian Hunter Signed-off-by: Chris Ball --- drivers/mmc/host/sdhci-cns3xxx.c | 5 +---- drivers/mmc/host/sdhci-dove.c | 5 +---- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +---- drivers/mmc/host/sdhci-of-esdhc.c | 5 +---- drivers/mmc/host/sdhci-of-hlwd.c | 5 +---- drivers/mmc/host/sdhci-pci.c | 26 +++++++++++++------------- drivers/mmc/host/sdhci-pltfm.c | 18 +++++++++++------- drivers/mmc/host/sdhci-pltfm.h | 6 ++++-- drivers/mmc/host/sdhci-pxav2.c | 5 +---- drivers/mmc/host/sdhci-pxav3.c | 5 +---- drivers/mmc/host/sdhci-s3c.c | 21 ++++++++++++++------- drivers/mmc/host/sdhci-tegra.c | 5 +---- drivers/mmc/host/sdhci.c | 2 +- drivers/mmc/host/sdhci.h | 2 +- 14 files changed, 52 insertions(+), 63 deletions(-) diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c index 87b6f079b6e0..b4257e700617 100644 --- a/drivers/mmc/host/sdhci-cns3xxx.c +++ b/drivers/mmc/host/sdhci-cns3xxx.c @@ -109,13 +109,10 @@ static struct platform_driver sdhci_cns3xxx_driver = { .driver = { .name = "sdhci-cns3xxx", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_cns3xxx_probe, .remove = __devexit_p(sdhci_cns3xxx_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_cns3xxx_init(void) diff --git a/drivers/mmc/host/sdhci-dove.c b/drivers/mmc/host/sdhci-dove.c index f2d29dca4420..a81312c91f70 100644 --- a/drivers/mmc/host/sdhci-dove.c +++ b/drivers/mmc/host/sdhci-dove.c @@ -82,13 +82,10 @@ static struct platform_driver sdhci_dove_driver = { .driver = { .name = "sdhci-dove", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_dove_probe, .remove = __devexit_p(sdhci_dove_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_dove_init(void) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 4b976f00ea85..38ebc4ea259f 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -599,14 +599,11 @@ static struct platform_driver sdhci_esdhc_imx_driver = { .name = "sdhci-esdhc-imx", .owner = THIS_MODULE, .of_match_table = imx_esdhc_dt_ids, + .pm = SDHCI_PLTFM_PMOPS, }, .id_table = imx_esdhc_devtype, .probe = sdhci_esdhc_imx_probe, .remove = __devexit_p(sdhci_esdhc_imx_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_esdhc_imx_init(void) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 59e9d003e589..01e5f627e0f0 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -125,13 +125,10 @@ static struct platform_driver sdhci_esdhc_driver = { .name = "sdhci-esdhc", .owner = THIS_MODULE, .of_match_table = sdhci_esdhc_of_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_esdhc_probe, .remove = __devexit_p(sdhci_esdhc_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_esdhc_init(void) diff --git a/drivers/mmc/host/sdhci-of-hlwd.c b/drivers/mmc/host/sdhci-of-hlwd.c index 9b0d794a4f69..3619adc7d9fc 100644 --- a/drivers/mmc/host/sdhci-of-hlwd.c +++ b/drivers/mmc/host/sdhci-of-hlwd.c @@ -87,13 +87,10 @@ static struct platform_driver sdhci_hlwd_driver = { .name = "sdhci-hlwd", .owner = THIS_MODULE, .of_match_table = sdhci_hlwd_of_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_hlwd_probe, .remove = __devexit_p(sdhci_hlwd_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_hlwd_init(void) diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index d833d9c2f7e3..6878a94626bc 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -54,8 +54,7 @@ struct sdhci_pci_fixes { int (*probe_slot) (struct sdhci_pci_slot *); void (*remove_slot) (struct sdhci_pci_slot *, int); - int (*suspend) (struct sdhci_pci_chip *, - pm_message_t); + int (*suspend) (struct sdhci_pci_chip *); int (*resume) (struct sdhci_pci_chip *); }; @@ -549,7 +548,7 @@ static void jmicron_remove_slot(struct sdhci_pci_slot *slot, int dead) jmicron_enable_mmc(slot->host, 0); } -static int jmicron_suspend(struct sdhci_pci_chip *chip, pm_message_t state) +static int jmicron_suspend(struct sdhci_pci_chip *chip) { int i; @@ -993,8 +992,9 @@ static struct sdhci_ops sdhci_pci_ops = { #ifdef CONFIG_PM -static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) +static int sdhci_pci_suspend(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; mmc_pm_flag_t slot_pm_flags; @@ -1010,7 +1010,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) if (!slot) continue; - ret = sdhci_suspend_host(slot->host, state); + ret = sdhci_suspend_host(slot->host); if (ret) { for (i--; i >= 0; i--) @@ -1026,7 +1026,7 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) } if (chip->fixes && chip->fixes->suspend) { - ret = chip->fixes->suspend(chip, state); + ret = chip->fixes->suspend(chip); if (ret) { for (i = chip->num_slots - 1; i >= 0; i--) sdhci_resume_host(chip->slots[i]->host); @@ -1042,16 +1042,17 @@ static int sdhci_pci_suspend(struct pci_dev *pdev, pm_message_t state) } pci_set_power_state(pdev, PCI_D3hot); } else { - pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); + pci_enable_wake(pdev, PCI_D3hot, 0); pci_disable_device(pdev); - pci_set_power_state(pdev, pci_choose_state(pdev, state)); + pci_set_power_state(pdev, PCI_D3hot); } return 0; } -static int sdhci_pci_resume(struct pci_dev *pdev) +static int sdhci_pci_resume(struct device *dev) { + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; int i, ret; @@ -1099,7 +1100,6 @@ static int sdhci_pci_runtime_suspend(struct device *dev) struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; - pm_message_t state = { .event = PM_EVENT_SUSPEND }; int i, ret; chip = pci_get_drvdata(pdev); @@ -1121,7 +1121,7 @@ static int sdhci_pci_runtime_suspend(struct device *dev) } if (chip->fixes && chip->fixes->suspend) { - ret = chip->fixes->suspend(chip, state); + ret = chip->fixes->suspend(chip); if (ret) { for (i = chip->num_slots - 1; i >= 0; i--) sdhci_runtime_resume_host(chip->slots[i]->host); @@ -1176,6 +1176,8 @@ static int sdhci_pci_runtime_idle(struct device *dev) #endif static const struct dev_pm_ops sdhci_pci_pm_ops = { + .suspend = sdhci_pci_suspend, + .resume = sdhci_pci_resume, .runtime_suspend = sdhci_pci_runtime_suspend, .runtime_resume = sdhci_pci_runtime_resume, .runtime_idle = sdhci_pci_runtime_idle, @@ -1428,8 +1430,6 @@ static struct pci_driver sdhci_driver = { .id_table = pci_ids, .probe = sdhci_pci_probe, .remove = __devexit_p(sdhci_pci_remove), - .suspend = sdhci_pci_suspend, - .resume = sdhci_pci_resume, .driver = { .pm = &sdhci_pci_pm_ops }, diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index a9e12ea05583..03970bcb3495 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -194,21 +194,25 @@ int sdhci_pltfm_unregister(struct platform_device *pdev) EXPORT_SYMBOL_GPL(sdhci_pltfm_unregister); #ifdef CONFIG_PM -int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state) +static int sdhci_pltfm_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - return sdhci_suspend_host(host, state); + return sdhci_suspend_host(host); } -EXPORT_SYMBOL_GPL(sdhci_pltfm_suspend); -int sdhci_pltfm_resume(struct platform_device *dev) +static int sdhci_pltfm_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); return sdhci_resume_host(host); } -EXPORT_SYMBOL_GPL(sdhci_pltfm_resume); + +const struct dev_pm_ops sdhci_pltfm_pmops = { + .suspend = sdhci_pltfm_suspend, + .resume = sdhci_pltfm_resume, +}; +EXPORT_SYMBOL_GPL(sdhci_pltfm_pmops); #endif /* CONFIG_PM */ static int __init sdhci_pltfm_drv_init(void) diff --git a/drivers/mmc/host/sdhci-pltfm.h b/drivers/mmc/host/sdhci-pltfm.h index 3a9fc3f40840..37e0e184a0bb 100644 --- a/drivers/mmc/host/sdhci-pltfm.h +++ b/drivers/mmc/host/sdhci-pltfm.h @@ -99,8 +99,10 @@ extern int sdhci_pltfm_register(struct platform_device *pdev, extern int sdhci_pltfm_unregister(struct platform_device *pdev); #ifdef CONFIG_PM -extern int sdhci_pltfm_suspend(struct platform_device *dev, pm_message_t state); -extern int sdhci_pltfm_resume(struct platform_device *dev); +extern const struct dev_pm_ops sdhci_pltfm_pmops; +#define SDHCI_PLTFM_PMOPS (&sdhci_pltfm_pmops) +#else +#define SDHCI_PLTFM_PMOPS NULL #endif #endif /* _DRIVERS_MMC_SDHCI_PLTFM_H */ diff --git a/drivers/mmc/host/sdhci-pxav2.c b/drivers/mmc/host/sdhci-pxav2.c index d4bf6d30c7ba..7a039c3cb1f1 100644 --- a/drivers/mmc/host/sdhci-pxav2.c +++ b/drivers/mmc/host/sdhci-pxav2.c @@ -218,13 +218,10 @@ static struct platform_driver sdhci_pxav2_driver = { .driver = { .name = "sdhci-pxav2", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_pxav2_probe, .remove = __devexit_p(sdhci_pxav2_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_pxav2_init(void) { diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index cff4ad3e7a59..15673a7ee6a5 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -264,13 +264,10 @@ static struct platform_driver sdhci_pxav3_driver = { .driver = { .name = "sdhci-pxav3", .owner = THIS_MODULE, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_pxav3_probe, .remove = __devexit_p(sdhci_pxav3_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_pxav3_init(void) { diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index cb60c4197e0a..0d33ff0d67fb 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -622,23 +622,29 @@ static int __devexit sdhci_s3c_remove(struct platform_device *pdev) #ifdef CONFIG_PM -static int sdhci_s3c_suspend(struct platform_device *dev, pm_message_t pm) +static int sdhci_s3c_suspend(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); - return sdhci_suspend_host(host, pm); + return sdhci_suspend_host(host); } -static int sdhci_s3c_resume(struct platform_device *dev) +static int sdhci_s3c_resume(struct device *dev) { - struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_host *host = dev_get_drvdata(dev); return sdhci_resume_host(host); } +static const struct dev_pm_ops sdhci_s3c_pmops = { + .suspend = sdhci_s3c_suspend, + .resume = sdhci_s3c_resume, +}; + +#define SDHCI_S3C_PMOPS (&sdhci_s3c_pmops) + #else -#define sdhci_s3c_suspend NULL -#define sdhci_s3c_resume NULL +#define SDHCI_S3C_PMOPS NULL #endif static struct platform_driver sdhci_s3c_driver = { @@ -647,6 +653,7 @@ static struct platform_driver sdhci_s3c_driver = { .driver = { .owner = THIS_MODULE, .name = "s3c-sdhci", + .pm = SDHCI_S3C_PMOPS, }, }; diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index 89699e861fc1..e2e18d3f949c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -318,13 +318,10 @@ static struct platform_driver sdhci_tegra_driver = { .name = "sdhci-tegra", .owner = THIS_MODULE, .of_match_table = sdhci_tegra_dt_match, + .pm = SDHCI_PLTFM_PMOPS, }, .probe = sdhci_tegra_probe, .remove = __devexit_p(sdhci_tegra_remove), -#ifdef CONFIG_PM - .suspend = sdhci_pltfm_suspend, - .resume = sdhci_pltfm_resume, -#endif }; static int __init sdhci_tegra_init(void) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 6d8eea323541..19ed580f2cab 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2327,7 +2327,7 @@ out: #ifdef CONFIG_PM -int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state) +int sdhci_suspend_host(struct sdhci_host *host) { int ret; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 0a5b65460d8a..a04d4d0c6fd2 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -374,7 +374,7 @@ extern int sdhci_add_host(struct sdhci_host *host); extern void sdhci_remove_host(struct sdhci_host *host, int dead); #ifdef CONFIG_PM -extern int sdhci_suspend_host(struct sdhci_host *host, pm_message_t state); +extern int sdhci_suspend_host(struct sdhci_host *host); extern int sdhci_resume_host(struct sdhci_host *host); extern void sdhci_enable_irq_wakeups(struct sdhci_host *host); #endif -- cgit v1.2.3-70-g09d2 From 5c7f0e083d2d98ba14ddd10e88f001a0ead4cae4 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 19 Dec 2011 15:51:38 -0800 Subject: Revert "mmc: enable runtime PM by default" When SDIO runtime PM was originally introduced, we immediately faced two regressions with two different chipsets, and in response decided not to enable it by default. With the recent work on the 8686 we hoped we found all the gotchas, so 08da834 did make sense (at least experimentally). Unfortunately we now see that some setups out there still refuse to work when SDIO runtime PM is enabled by default (see http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously we can't live with these kind of regressions. This reverts commit 08da834a24312157f512224691ad1fddd11c1073. Signed-off-by: Ohad Ben-Cohen Cc: Daniel Drake Signed-off-by: Chris Ball --- drivers/mmc/core/host.c | 11 ----------- 1 file changed, 11 deletions(-) diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e8a5eb38748b..d31c78b72b0f 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -302,17 +302,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) host->max_blk_size = 512; host->max_blk_count = PAGE_CACHE_SIZE / 512; - /* - * Enable runtime power management by default. This flag was added due - * to runtime power management causing disruption for some users, but - * the power on/off code has been improved since then. - * - * We'll enable this flag by default as an experiment, and if no - * problems are reported, we will follow up later and remove the flag - * altogether. - */ - host->caps = MMC_CAP_POWER_OFF_CARD; - return host; free: -- cgit v1.2.3-70-g09d2 From 61074287c2965edf0fc75b54ae8f4ce99f182669 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 15 Dec 2011 13:34:50 +1030 Subject: mmc: vub300: fix type of firmware_rom_wait_states module parameter You didn't mean this to be a bool. Signed-off-by: Rusty Russell Acked-by: Tony Olech Cc: Signed-off-by: Chris Ball --- drivers/mmc/host/vub300.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c index e8f6e65183d7..2ec978bc32ba 100644 --- a/drivers/mmc/host/vub300.c +++ b/drivers/mmc/host/vub300.c @@ -259,7 +259,7 @@ static int firmware_rom_wait_states = 0x04; static int firmware_rom_wait_states = 0x1C; #endif -module_param(firmware_rom_wait_states, bool, 0644); +module_param(firmware_rom_wait_states, int, 0644); MODULE_PARM_DESC(firmware_rom_wait_states, "ROM wait states byte=RRRIIEEE (Reserved Internal External)"); -- cgit v1.2.3-70-g09d2 From d21b59451886cb82448302f8d6f9ac87c3bd56cf Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Mon, 5 Dec 2011 13:17:41 +0200 Subject: evm: key must be set once during initialization On multi-core systems, setting of the key before every caclculation, causes invalid HMAC calculation for other tfm users, because internal state (ipad, opad) can be invalid before set key call returns. It needs to be set only once during initialization. Signed-off-by: Dmitry Kasatkin Acked-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/evm/evm_crypto.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index 5dd5b140242c..4ad657d88097 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -41,6 +41,12 @@ static struct shash_desc *init_desc(void) hmac_tfm = NULL; return ERR_PTR(rc); } + rc = crypto_shash_setkey(hmac_tfm, evmkey, evmkey_len); + if (rc) { + crypto_free_shash(hmac_tfm); + hmac_tfm = NULL; + return ERR_PTR(rc); + } } desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(hmac_tfm), @@ -51,11 +57,7 @@ static struct shash_desc *init_desc(void) desc->tfm = hmac_tfm; desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP; - rc = crypto_shash_setkey(hmac_tfm, evmkey, evmkey_len); - if (rc) - goto out; rc = crypto_shash_init(desc); -out: if (rc) { kfree(desc); return ERR_PTR(rc); -- cgit v1.2.3-70-g09d2 From 97426f985729573cea06e82e271cc3929f1f5f8e Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Mon, 5 Dec 2011 13:17:42 +0200 Subject: evm: prevent racing during tfm allocation There is a small chance of racing during tfm allocation. This patch fixes it. Signed-off-by: Dmitry Kasatkin Acked-by: Mimi Zohar Signed-off-by: James Morris --- security/integrity/evm/evm_crypto.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/security/integrity/evm/evm_crypto.c b/security/integrity/evm/evm_crypto.c index 4ad657d88097..8738deff26fa 100644 --- a/security/integrity/evm/evm_crypto.c +++ b/security/integrity/evm/evm_crypto.c @@ -27,26 +27,35 @@ static int evmkey_len = MAX_KEY_SIZE; struct crypto_shash *hmac_tfm; +static DEFINE_MUTEX(mutex); + static struct shash_desc *init_desc(void) { int rc; struct shash_desc *desc; if (hmac_tfm == NULL) { + mutex_lock(&mutex); + if (hmac_tfm) + goto out; hmac_tfm = crypto_alloc_shash(evm_hmac, 0, CRYPTO_ALG_ASYNC); if (IS_ERR(hmac_tfm)) { pr_err("Can not allocate %s (reason: %ld)\n", evm_hmac, PTR_ERR(hmac_tfm)); rc = PTR_ERR(hmac_tfm); hmac_tfm = NULL; + mutex_unlock(&mutex); return ERR_PTR(rc); } rc = crypto_shash_setkey(hmac_tfm, evmkey, evmkey_len); if (rc) { crypto_free_shash(hmac_tfm); hmac_tfm = NULL; + mutex_unlock(&mutex); return ERR_PTR(rc); } +out: + mutex_unlock(&mutex); } desc = kmalloc(sizeof(*desc) + crypto_shash_descsize(hmac_tfm), -- cgit v1.2.3-70-g09d2 From 9ad33ba51a1ac29ba3cf90d95e4b7f7eba278f6c Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 10:34:01 +0800 Subject: mfd: Add missed free_irq in da903x_remove Signed-off-by: Axel Lin Acked-by: Eric Miao Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 1b79c37fd599..62ce685a79cb 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -549,6 +549,7 @@ static int __devexit da903x_remove(struct i2c_client *client) struct da903x_chip *chip = i2c_get_clientdata(client); da903x_remove_subdevs(chip); + free_irq(client->irq, chip); kfree(chip); return 0; } -- cgit v1.2.3-70-g09d2 From 890c98e3746fa8705cc9c70979e64360cf2d8a31 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 11:00:06 +0800 Subject: mfd: Set adp5520 bits if new value is different from the old one Current code checks if all the bit_mask bits are all zero is wrong. We need to write new value if the bit mask fields of new value is not equal to old value. Signed-off-by: Axel Lin Acked-by: Michael Hennerich Signed-off-by: Samuel Ortiz --- drivers/mfd/adp5520.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/adp5520.c b/drivers/mfd/adp5520.c index f1d88483112c..8d816cce8322 100644 --- a/drivers/mfd/adp5520.c +++ b/drivers/mfd/adp5520.c @@ -109,7 +109,7 @@ int adp5520_set_bits(struct device *dev, int reg, uint8_t bit_mask) ret = __adp5520_read(chip->client, reg, ®_val); - if (!ret && ((reg_val & bit_mask) == 0)) { + if (!ret && ((reg_val & bit_mask) != bit_mask)) { reg_val |= bit_mask; ret = __adp5520_write(chip->client, reg, reg_val); } -- cgit v1.2.3-70-g09d2 From af65e6cef488be0bd15932c8ce9801a47a183051 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 14:23:03 +0800 Subject: mfd: Set da903x bits if new value is different from the old one It does not make sense to write new value only when all the bit_mask bits are zero. We need to write new value if the bit mask fields of new value is not equal to old value. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/da903x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c index 62ce685a79cb..1924b857a0fb 100644 --- a/drivers/mfd/da903x.c +++ b/drivers/mfd/da903x.c @@ -182,7 +182,7 @@ int da903x_set_bits(struct device *dev, int reg, uint8_t bit_mask) if (ret) goto out; - if ((reg_val & bit_mask) == 0) { + if ((reg_val & bit_mask) != bit_mask) { reg_val |= bit_mask; ret = __da903x_write(chip->client, reg, reg_val); } -- cgit v1.2.3-70-g09d2 From 26bc4e0cc5426e86398d6780d160f02c0a347087 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 31 Oct 2011 14:24:30 +0800 Subject: mfd: Set tps6586x bits if new value is different from the old one It does not make sense to write new value only when all the bit_mask bits are zero. We need to write new value if the bit mask fields of new value is not equal to old value. Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/tps6586x.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index bba26d96c240..a5ddf31b60ca 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -197,7 +197,7 @@ int tps6586x_set_bits(struct device *dev, int reg, uint8_t bit_mask) if (ret) goto out; - if ((reg_val & bit_mask) == 0) { + if ((reg_val & bit_mask) != bit_mask) { reg_val |= bit_mask; ret = __tps6586x_write(to_i2c_client(dev), reg, reg_val); } -- cgit v1.2.3-70-g09d2 From b5488b6e868454fb10d23278de5038cda98b13ab Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 4 Nov 2011 23:14:46 +0000 Subject: mfd: Update wm8994 active device checks for WM1811 This didn't go in as part of the original MFD patch for WM1811 due to cross tree issues. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz --- drivers/mfd/wm8994-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index 5d6ba132837e..61894fced8ea 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -239,6 +239,7 @@ static int wm8994_suspend(struct device *dev) switch (wm8994->type) { case WM8958: + case WM1811: ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1); if (ret < 0) { dev_err(dev, "Failed to read power status: %d\n", ret); -- cgit v1.2.3-70-g09d2 From 858a6303f2b14945447a964563f54c918ef3927e Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 7 Nov 2011 11:20:09 +0800 Subject: mfd: include linux/module.h for ab5500-debugfs Include linux/module.h to fix below build error: CC drivers/mfd/ab5500-debugfs.o drivers/mfd/ab5500-debugfs.c:571: error: 'THIS_MODULE' undeclared here (not in a function) make[2]: *** [drivers/mfd/ab5500-debugfs.o] Error 1 Signed-off-by: Axel Lin Acked-by: Linus Walleij Signed-off-by: Samuel Ortiz --- drivers/mfd/ab5500-debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/ab5500-debugfs.c b/drivers/mfd/ab5500-debugfs.c index 43c0ebb81956..b7b2d3483fd4 100644 --- a/drivers/mfd/ab5500-debugfs.c +++ b/drivers/mfd/ab5500-debugfs.c @@ -4,7 +4,7 @@ * Debugfs support for the AB5500 MFD driver */ -#include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 8653be1afd60d6e8c36139b487e375b70357d9ef Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Mon, 1 Aug 2011 23:00:28 +0200 Subject: mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver Check inuse variable before trying to access twl_map to prevent dereferencing of uninitialized variable. Signed-off-by: Ilya Yanok Cc: stable@kernel.org Signed-off-by: Samuel Ortiz --- drivers/mfd/twl-core.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index bfbd66021afd..61e70cfaa774 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -363,13 +363,13 @@ int twl_i2c_write(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl_map[mod_no].sid; - twl = &twl_modules[sid]; - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } + sid = twl_map[mod_no].sid; + twl = &twl_modules[sid]; + mutex_lock(&twl->xfer_lock); /* * [MSG1]: fill the register address data @@ -420,13 +420,13 @@ int twl_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes) pr_err("%s: invalid module number %d\n", DRIVER_NAME, mod_no); return -EPERM; } - sid = twl_map[mod_no].sid; - twl = &twl_modules[sid]; - if (unlikely(!inuse)) { - pr_err("%s: client %d is not initialized\n", DRIVER_NAME, sid); + pr_err("%s: not initialized\n", DRIVER_NAME); return -EPERM; } + sid = twl_map[mod_no].sid; + twl = &twl_modules[sid]; + mutex_lock(&twl->xfer_lock); /* [MSG1] fill the register address data */ msg = &twl->xfer_msg[0]; -- cgit v1.2.3-70-g09d2 From df7206477e36bb73e81b99c2cbbc1b91e4b1c8ac Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 10 Nov 2011 09:56:18 +0800 Subject: mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources Fix below build warning if CONFIG_DEBUG_FS is disabled. CC drivers/mfd/ab8500-core.o drivers/mfd/ab8500-core.c:623: warning: 'ab8500_debug_resources' defined but not used Signed-off-by: Axel Lin Signed-off-by: Samuel Ortiz --- drivers/mfd/ab8500-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 1e9173804ede..d3d572b2317b 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -620,6 +620,7 @@ static struct resource __devinitdata ab8500_fg_resources[] = { static struct resource __devinitdata ab8500_chargalg_resources[] = {}; +#ifdef CONFIG_DEBUG_FS static struct resource __devinitdata ab8500_debug_resources[] = { { .name = "IRQ_FIRST", @@ -634,6 +635,7 @@ static struct resource __devinitdata ab8500_debug_resources[] = { .flags = IORESOURCE_IRQ, }, }; +#endif static struct resource __devinitdata ab8500_usb_resources[] = { { -- cgit v1.2.3-70-g09d2 From 8f6a459a9daa6ce76d7c192f2cb3047fffb45ec8 Mon Sep 17 00:00:00 2001 From: Marcus Folkesson Date: Tue, 22 Nov 2011 14:39:51 +0100 Subject: mfd: Handle tps65910 clear-mask correctly The function is not actually cleaing the bitmask. Signed-off-by: Marcus Folkesson Signed-off-by: Samuel Ortiz --- drivers/mfd/tps65910.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 6f5b8cf2f652..c1da84bc1573 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -120,7 +120,7 @@ int tps65910_clear_bits(struct tps65910 *tps65910, u8 reg, u8 mask) goto out; } - data &= mask; + data &= ~mask; err = tps65910_i2c_write(tps65910, reg, 1, &data); if (err) dev_err(tps65910->dev, "write to reg %x failed\n", reg); -- cgit v1.2.3-70-g09d2 From 286f8f3cd615177d5d0f8af8059a3fa39f51fa97 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sun, 27 Nov 2011 07:17:41 +1100 Subject: mfd: Base interrupt for twl4030-irq must be one-shot As the interrupt source is only cleared by the threaded interrupt service routine, we need to make the base interrupt IRQF_ONESHOT. Without this, the first interrupt from the TWL4030 cause the CPU to enter an infinite loop trying to handle to interrupt but never clearing it. Signed-off-by: NeilBrown Tested-by: Felipe Contreras Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index f062c8cc6c38..3d3d6ed48f8d 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -733,8 +733,9 @@ int twl4030_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) } /* install an irq handler to demultiplex the TWL4030 interrupt */ - status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, 0, - "TWL4030-PIH", NULL); + status = request_threaded_irq(irq_num, NULL, handle_twl4030_pih, + IRQF_ONESHOT, + "TWL4030-PIH", NULL); if (status < 0) { pr_err("twl4030: could not claim irq%d: %d\n", irq_num, status); goto fail_rqirq; -- cgit v1.2.3-70-g09d2 From c1e61bcf8269d3bc4390a363ad2e1bc1dc226bda Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Sun, 27 Nov 2011 07:17:41 +1100 Subject: mfd: Use request_threaded_irq for twl4030-irq instead of irq_set_chained_handler irq_set_chained_handler sets 'desc->handle_irq'. However this irq is called by handle_nested_irq from handle_twl4030_pih, and that uses action->thread_fn. So the handled set with irq_set_chained_handler is never called. So change to use request_threaded_irq instead - that sets the correct field. Tested on GTA04 Phoenux. Signed-off-by: NeilBrown Tested-by: Felipe Contreras Signed-off-by: Samuel Ortiz --- drivers/mfd/twl4030-irq.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index 3d3d6ed48f8d..29f11e0765fe 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -432,6 +432,7 @@ struct sih_agent { u32 edge_change; struct mutex irq_lock; + char *irq_name; }; /*----------------------------------------------------------------------*/ @@ -589,7 +590,7 @@ static inline int sih_read_isr(const struct sih *sih) * Generic handler for SIH interrupts ... we "know" this is called * in task context, with IRQs enabled. */ -static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) +static irqreturn_t handle_twl4030_sih(int irq, void *data) { struct sih_agent *agent = irq_get_handler_data(irq); const struct sih *sih = agent->sih; @@ -602,7 +603,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) pr_err("twl4030: %s SIH, read ISR error %d\n", sih->name, isr); /* REVISIT: recover; eventually mask it all, etc */ - return; + return IRQ_HANDLED; } while (isr) { @@ -616,6 +617,7 @@ static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) pr_err("twl4030: %s SIH, invalid ISR bit %d\n", sih->name, irq); } + return IRQ_HANDLED; } static unsigned twl4030_irq_next; @@ -668,18 +670,19 @@ int twl4030_sih_setup(int module) activate_irq(irq); } - status = irq_base; twl4030_irq_next += i; /* replace generic PIH handler (handle_simple_irq) */ irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); - irq_set_chained_handler(irq, handle_twl4030_sih); + agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); + status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, + agent->irq_name ?: sih->name, NULL); pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, irq, irq_base, twl4030_irq_next - 1); - return status; + return status < 0 ? status : irq_base; } /* FIXME need a call to reverse twl4030_sih_setup() ... */ -- cgit v1.2.3-70-g09d2 From fa860403e61cf5201e2f03b726aa53c30ae9a659 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Fri, 9 Dec 2011 11:27:55 +0800 Subject: mfd: Include linux/io.h to jz4740-adc Include linux/io.h to fix below build error: CC drivers/mfd/jz4740-adc.o drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_irq_demux': drivers/mfd/jz4740-adc.c:73: error: implicit declaration of function 'readb' drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_set_enabled': drivers/mfd/jz4740-adc.c:110: error: implicit declaration of function 'writeb' drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_set_config': drivers/mfd/jz4740-adc.c:146: error: implicit declaration of function 'readl' drivers/mfd/jz4740-adc.c:151: error: implicit declaration of function 'writel' drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_probe': drivers/mfd/jz4740-adc.c:249: error: implicit declaration of function 'ioremap_nocache' drivers/mfd/jz4740-adc.c:249: warning: assignment makes pointer from integer without a cast drivers/mfd/jz4740-adc.c:289: warning: passing argument 3 of 'mfd_add_devices' discards qualifiers from pointer target type include/linux/mfd/core.h:93: note: expected 'struct mfd_cell *' but argument is of type 'const struct mfd_cell *' drivers/mfd/jz4740-adc.c:299: error: implicit declaration of function 'iounmap' make[2]: *** [drivers/mfd/jz4740-adc.o] Error 1 make[1]: *** [drivers/mfd] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Acked-by: Lars-Peter Clausen Signed-off-by: Samuel Ortiz --- drivers/mfd/jz4740-adc.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 1e9ee533eacb..ef39528088f2 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -16,6 +16,7 @@ */ #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From b246272ecc5ac68c743b15c9e41a2275f7ce70e2 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Mon, 19 Dec 2011 17:11:52 -0800 Subject: cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a new set of allowed cpuset nodes where the two nodemasks, as a result of the remap, are now disjoint. c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing cpuset's mems") adds get_mems_allowed() to prevent the set of allowed nodes from changing for a thread. This causes any update to a set of allowed nodes to stall until put_mems_allowed() is called. This stall is unncessary, however, if at least one node remains unchanged in the update to the set of allowed nodes. This was addressed by 89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one node remains set"), but it's still possible that an empty nodemask may be read from a mempolicy because the old nodemask may be remapped to the new nodemask during rebind. To prevent this, only avoid the stall if there is no mempolicy for the thread being changed. This is a temporary solution until all reads from mempolicy nodemasks can be guaranteed to not be empty without the get_mems_allowed() synchronization. Also moves the check for nodemask intersection inside task_lock() so that tsk->mems_allowed cannot change. This ensures that nothing can set this tsk's mems_allowed out from under us and also protects tsk->mempolicy. Reported-by: Miao Xie Signed-off-by: David Rientjes Cc: KOSAKI Motohiro Cc: Paul Menage Cc: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/cpuset.c | 29 ++++++++++++++++++++++++----- 1 file changed, 24 insertions(+), 5 deletions(-) diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 9fe58c46a426..0b1712dba587 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -123,6 +123,19 @@ static inline struct cpuset *task_cs(struct task_struct *task) struct cpuset, css); } +#ifdef CONFIG_NUMA +static inline bool task_has_mempolicy(struct task_struct *task) +{ + return task->mempolicy; +} +#else +static inline bool task_has_mempolicy(struct task_struct *task) +{ + return false; +} +#endif + + /* bits in struct cpuset flags field */ typedef enum { CS_CPU_EXCLUSIVE, @@ -949,7 +962,7 @@ static void cpuset_migrate_mm(struct mm_struct *mm, const nodemask_t *from, static void cpuset_change_task_nodemask(struct task_struct *tsk, nodemask_t *newmems) { - bool masks_disjoint = !nodes_intersects(*newmems, tsk->mems_allowed); + bool need_loop; repeat: /* @@ -962,6 +975,14 @@ repeat: return; task_lock(tsk); + /* + * Determine if a loop is necessary if another thread is doing + * get_mems_allowed(). If at least one node remains unchanged and + * tsk does not have a mempolicy, then an empty nodemask will not be + * possible when mems_allowed is larger than a word. + */ + need_loop = task_has_mempolicy(tsk) || + !nodes_intersects(*newmems, tsk->mems_allowed); nodes_or(tsk->mems_allowed, tsk->mems_allowed, *newmems); mpol_rebind_task(tsk, newmems, MPOL_REBIND_STEP1); @@ -981,11 +1002,9 @@ repeat: /* * Allocation of memory is very fast, we needn't sleep when waiting - * for the read-side. No wait is necessary, however, if at least one - * node remains unchanged. + * for the read-side. */ - while (masks_disjoint && - ACCESS_ONCE(tsk->mems_allowed_change_disable)) { + while (need_loop && ACCESS_ONCE(tsk->mems_allowed_change_disable)) { task_unlock(tsk); if (!task_curr(tsk)) yield(); -- cgit v1.2.3-70-g09d2 From 695c60f21c69e525a89279a5f35bae4ff237afbc Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Mon, 19 Dec 2011 17:11:55 -0800 Subject: nilfs2: unbreak compat ioctl commit 828b1c50ae ("nilfs2: add compat ioctl") incidentally broke all other NILFS compat ioctls. Make them work again. Signed-off-by: Thomas Meyer Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: [3.0+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/ioctl.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 41d6743d303c..3e654273cfc2 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -842,6 +842,19 @@ long nilfs_compat_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) case FS_IOC32_GETVERSION: cmd = FS_IOC_GETVERSION; break; + case NILFS_IOCTL_CHANGE_CPMODE: + case NILFS_IOCTL_DELETE_CHECKPOINT: + case NILFS_IOCTL_GET_CPINFO: + case NILFS_IOCTL_GET_CPSTAT: + case NILFS_IOCTL_GET_SUINFO: + case NILFS_IOCTL_GET_SUSTAT: + case NILFS_IOCTL_GET_VINFO: + case NILFS_IOCTL_GET_BDESCS: + case NILFS_IOCTL_CLEAN_SEGMENTS: + case NILFS_IOCTL_SYNC: + case NILFS_IOCTL_RESIZE: + case NILFS_IOCTL_SET_ALLOC_RANGE: + break; default: return -ENOIOCTLCMD; } -- cgit v1.2.3-70-g09d2 From 481fe17e973fb97aa3edf17c69557afe88d8334f Mon Sep 17 00:00:00 2001 From: Haogang Chen Date: Mon, 19 Dec 2011 17:11:56 -0800 Subject: nilfs2: potential integer overflow in nilfs_ioctl_clean_segments() There is a potential integer overflow in nilfs_ioctl_clean_segments(). When a large argv[n].v_nmembs is passed from the userspace, the subsequent call to vmalloc() will allocate a buffer smaller than expected, which leads to out-of-bound access in nilfs_ioctl_move_blocks() and lfs_clean_segments(). The following check does not prevent the overflow because nsegs is also controlled by the userspace and could be very large. if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment) goto out_free; This patch clamps argv[n].v_nmembs to UINT_MAX / argv[n].v_size, and returns -EINVAL when overflow. Signed-off-by: Haogang Chen Signed-off-by: Ryusuke Konishi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/nilfs2/ioctl.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c index 3e654273cfc2..ac258beeda3c 100644 --- a/fs/nilfs2/ioctl.c +++ b/fs/nilfs2/ioctl.c @@ -625,6 +625,9 @@ static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp, if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment) goto out_free; + if (argv[n].v_nmembs >= UINT_MAX / argv[n].v_size) + goto out_free; + len = argv[n].v_size * argv[n].v_nmembs; base = (void __user *)(unsigned long)argv[n].v_base; if (len == 0) { -- cgit v1.2.3-70-g09d2 From a41c58a6665cc995e237303b05db42100b71b65e Mon Sep 17 00:00:00 2001 From: Hillf Danton Date: Mon, 19 Dec 2011 17:11:57 -0800 Subject: memcg: keep root group unchanged if creation fails If the request is to create non-root group and we fail to meet it, we should leave the root unchanged. Signed-off-by: Hillf Danton Acked-by: Hugh Dickins Acked-by: KAMEZAWA Hiroyuki Acked-by: Michal Hocko Cc: Balbir Singh Cc: David Rientjes Cc: Andrea Arcangeli Cc: Johannes Weiner Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 6aff93c98aca..b63f5f7dfa07 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -4907,9 +4907,9 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) int cpu; enable_swap_cgroup(); parent = NULL; - root_mem_cgroup = memcg; if (mem_cgroup_soft_limit_tree_init()) goto free_out; + root_mem_cgroup = memcg; for_each_possible_cpu(cpu) { struct memcg_stock_pcp *stock = &per_cpu(memcg_stock, cpu); @@ -4948,7 +4948,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) return &memcg->css; free_out: __mem_cgroup_free(memcg); - root_mem_cgroup = NULL; return ERR_PTR(error); } -- cgit v1.2.3-70-g09d2 From ff05b6f7ae762b6eb464183eec994b28ea09f6dd Mon Sep 17 00:00:00 2001 From: Frantisek Hrbata Date: Mon, 19 Dec 2011 17:11:59 -0800 Subject: oom: fix integer overflow of points in oom_badness An integer overflow will happen on 64bit archs if task's sum of rss, swapents and nr_ptes exceeds (2^31)/1000 value. This was introduced by commit f755a04 oom: use pte pages in OOM score where the oom score computation was divided into several steps and it's no longer computed as one expression in unsigned long(rss, swapents, nr_pte are unsigned long), where the result value assigned to points(int) is in range(1..1000). So there could be an int overflow while computing 176 points *= 1000; and points may have negative value. Meaning the oom score for a mem hog task will be one. 196 if (points <= 0) 197 return 1; For example: [ 3366] 0 3366 35390480 24303939 5 0 0 oom01 Out of memory: Kill process 3366 (oom01) score 1 or sacrifice child Here the oom1 process consumes more than 24303939(rss)*4096~=92GB physical memory, but it's oom score is one. In this situation the mem hog task is skipped and oom killer kills another and most probably innocent task with oom score greater than one. The points variable should be of type long instead of int to prevent the int overflow. Signed-off-by: Frantisek Hrbata Acked-by: KOSAKI Motohiro Acked-by: Oleg Nesterov Acked-by: David Rientjes Cc: [2.6.36+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/oom_kill.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 76f2c5ae908e..069b64e521fc 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -176,7 +176,7 @@ static bool oom_unkillable_task(struct task_struct *p, unsigned int oom_badness(struct task_struct *p, struct mem_cgroup *mem, const nodemask_t *nodemask, unsigned long totalpages) { - int points; + long points; if (oom_unkillable_task(p, mem, nodemask)) return 0; -- cgit v1.2.3-70-g09d2 From b75d91f7ca513f0a4d0d1ad0942fb90cf5a2bc88 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Mon, 19 Dec 2011 17:12:02 -0800 Subject: ipmi_watchdog: restore settings when BMC reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If the BMC gets reset, it will return 0x80 response errors. In less than a week # grep "Error 80 on cmd 22" /var/log/kernel |wc -l 378681 In this case, it is probably a good idea to restore the IPMI settings. Signed-off-by: Corey Minyard Tested-by: Arkadiusz Miśkiewicz Reported-by: Arkadiusz Miśkiewicz Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/char/ipmi/ipmi_watchdog.c | 41 ++++++++++++++++++++++++++++++++++++--- 1 file changed, 38 insertions(+), 3 deletions(-) diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index c2917ffad2c2..34767a6d7f42 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -139,6 +139,8 @@ #define IPMI_WDOG_SET_TIMER 0x24 #define IPMI_WDOG_GET_TIMER 0x25 +#define IPMI_WDOG_TIMER_NOT_INIT_RESP 0x80 + /* These are here until the real ones get into the watchdog.h interface. */ #ifndef WDIOC_GETTIMEOUT #define WDIOC_GETTIMEOUT _IOW(WATCHDOG_IOCTL_BASE, 20, int) @@ -596,6 +598,7 @@ static int ipmi_heartbeat(void) struct kernel_ipmi_msg msg; int rv; struct ipmi_system_interface_addr addr; + int timeout_retries = 0; if (ipmi_ignore_heartbeat) return 0; @@ -616,6 +619,7 @@ static int ipmi_heartbeat(void) mutex_lock(&heartbeat_lock); +restart: atomic_set(&heartbeat_tofree, 2); /* @@ -653,7 +657,33 @@ static int ipmi_heartbeat(void) /* Wait for the heartbeat to be sent. */ wait_for_completion(&heartbeat_wait); - if (heartbeat_recv_msg.msg.data[0] != 0) { + if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) { + timeout_retries++; + if (timeout_retries > 3) { + printk(KERN_ERR PFX ": Unable to restore the IPMI" + " watchdog's settings, giving up.\n"); + rv = -EIO; + goto out_unlock; + } + + /* + * The timer was not initialized, that means the BMC was + * probably reset and lost the watchdog information. Attempt + * to restore the timer's info. Note that we still hold + * the heartbeat lock, to keep a heartbeat from happening + * in this process, so must say no heartbeat to avoid a + * deadlock on this mutex. + */ + rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); + if (rv) { + printk(KERN_ERR PFX ": Unable to send the command to" + " set the watchdog's settings, giving up.\n"); + goto out_unlock; + } + + /* We might need a new heartbeat, so do it now */ + goto restart; + } else if (heartbeat_recv_msg.msg.data[0] != 0) { /* * Got an error in the heartbeat response. It was already * reported in ipmi_wdog_msg_handler, but we should return @@ -662,6 +692,7 @@ static int ipmi_heartbeat(void) rv = -EINVAL; } +out_unlock: mutex_unlock(&heartbeat_lock); return rv; @@ -922,11 +953,15 @@ static struct miscdevice ipmi_wdog_miscdev = { static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, void *handler_data) { - if (msg->msg.data[0] != 0) { + if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER && + msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP) + printk(KERN_INFO PFX "response: The IPMI controller appears" + " to have been reset, will attempt to reinitialize" + " the watchdog timer\n"); + else if (msg->msg.data[0] != 0) printk(KERN_ERR PFX "response: Error %x on cmd %x\n", msg->msg.data[0], msg->msg.cmd); - } ipmi_free_recv_msg(msg); } -- cgit v1.2.3-70-g09d2 From 0006526d78e93c3684c806bf7cf3f67dfa49c3c8 Mon Sep 17 00:00:00 2001 From: Kautuk Consul Date: Mon, 19 Dec 2011 17:12:04 -0800 Subject: mm/vmalloc.c: remove static declaration of va from __get_vm_area_node Static storage is not required for the struct vmap_area in __get_vm_area_node. Removing "static" to store this variable on the stack instead. Signed-off-by: Kautuk Consul Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/vmalloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 1d8b32f07139..27be2f0d4cb7 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1290,7 +1290,7 @@ static struct vm_struct *__get_vm_area_node(unsigned long size, unsigned long align, unsigned long flags, unsigned long start, unsigned long end, int node, gfp_t gfp_mask, void *caller) { - static struct vmap_area *va; + struct vmap_area *va; struct vm_struct *area; BUG_ON(in_interrupt()); -- cgit v1.2.3-70-g09d2 From 3d3c8f93a237b64580c5c5e138edeb1377e98230 Mon Sep 17 00:00:00 2001 From: Michel Lespinasse Date: Mon, 19 Dec 2011 17:12:06 -0800 Subject: binary_sysctl(): fix memory leak binary_sysctl() calls sysctl_getname() which allocates from names_cache slab usin __getname() The matching function to free the name is __putname(), and not putname() which should be used only to match getname() allocations. This is because when auditing is enabled, putname() calls audit_putname *instead* (not in addition) to __putname(). Then, if a syscall is in progress, audit_putname does not release the name - instead, it expects the name to get released when the syscall completes, but that will happen only if audit_getname() was called previously, i.e. if the name was allocated with getname() rather than the naked __getname(). So, __getname() followed by putname() ends up leaking memory. Signed-off-by: Michel Lespinasse Acked-by: Al Viro Cc: Christoph Hellwig Cc: Eric Paris Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- kernel/sysctl_binary.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sysctl_binary.c b/kernel/sysctl_binary.c index 6318b511afa1..a650694883a1 100644 --- a/kernel/sysctl_binary.c +++ b/kernel/sysctl_binary.c @@ -1354,7 +1354,7 @@ static ssize_t binary_sysctl(const int *name, int nlen, fput(file); out_putname: - putname(pathname); + __putname(pathname); out: return result; } -- cgit v1.2.3-70-g09d2 From a76c0adf60f6ca5ff3481992e4ea0383776b24d2 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Mon, 19 Dec 2011 04:11:40 +0000 Subject: sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd When checking whether a DATA chunk fits into the estimated rwnd a full sizeof(struct sk_buff) is added to the needed chunk size. This quickly exhausts the available rwnd space and leads to packets being sent which are much below the PMTU limit. This can lead to much worse performance. The reason for this behaviour was to avoid putting too much memory pressure on the receiver. The concept is not completely irational because a Linux receiver does in fact clone an skb for each DATA chunk delivered. However, Linux also reserves half the available socket buffer space for data structures therefore usage of it is already accounted for. When proposing to change this the last time it was noted that this behaviour was introduced to solve a performance issue caused by rwnd overusage in combination with small DATA chunks. Trying to reproduce this I found that with the sk_buff overhead removed, the performance would improve significantly unless socket buffer limits are increased. The following numbers have been gathered using a patched iperf supporting SCTP over a live 1 Gbit ethernet network. The -l option was used to limit DATA chunk sizes. The numbers listed are based on the average of 3 test runs each. Default values have been used for sk_(r|w)mem. Chunk Size Unpatched No Overhead ------------------------------------- 4 15.2 Kbit [!] 12.2 Mbit [!] 8 35.8 Kbit [!] 26.0 Mbit [!] 16 95.5 Kbit [!] 54.4 Mbit [!] 32 106.7 Mbit 102.3 Mbit 64 189.2 Mbit 188.3 Mbit 128 331.2 Mbit 334.8 Mbit 256 537.7 Mbit 536.0 Mbit 512 766.9 Mbit 766.6 Mbit 1024 810.1 Mbit 808.6 Mbit Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/sctp/output.c | 8 +------- net/sctp/outqueue.c | 6 ++---- 2 files changed, 3 insertions(+), 11 deletions(-) diff --git a/net/sctp/output.c b/net/sctp/output.c index 08b3cead6503..817174eb5f41 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -697,13 +697,7 @@ static void sctp_packet_append_data(struct sctp_packet *packet, /* Keep track of how many bytes are in flight to the receiver. */ asoc->outqueue.outstanding_bytes += datasize; - /* Update our view of the receiver's rwnd. Include sk_buff overhead - * while updating peer.rwnd so that it reduces the chances of a - * receiver running out of receive buffer space even when receive - * window is still open. This can happen when a sender is sending - * sending small messages. - */ - datasize += sizeof(struct sk_buff); + /* Update our view of the receiver's rwnd. */ if (datasize < rwnd) rwnd -= datasize; else diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 14c2b06028ff..cfeb1d4a1ee6 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -411,8 +411,7 @@ void sctp_retransmit_mark(struct sctp_outq *q, chunk->transport->flight_size -= sctp_data_size(chunk); q->outstanding_bytes -= sctp_data_size(chunk); - q->asoc->peer.rwnd += (sctp_data_size(chunk) + - sizeof(struct sk_buff)); + q->asoc->peer.rwnd += sctp_data_size(chunk); } continue; } @@ -432,8 +431,7 @@ void sctp_retransmit_mark(struct sctp_outq *q, * (Section 7.2.4)), add the data size of those * chunks to the rwnd. */ - q->asoc->peer.rwnd += (sctp_data_size(chunk) + - sizeof(struct sk_buff)); + q->asoc->peer.rwnd += sctp_data_size(chunk); q->outstanding_bytes -= sctp_data_size(chunk); if (chunk->transport) transport->flight_size -= sctp_data_size(chunk); -- cgit v1.2.3-70-g09d2 From cd7816d14953c8af910af5bb92f488b0b277e29d Mon Sep 17 00:00:00 2001 From: Gerlando Falauto Date: Mon, 19 Dec 2011 22:58:04 +0000 Subject: net: have ipconfig not wait if no dev is available previous commit 3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c makes IP-Config wait for carrier on at least one network device. Before waiting (predefined value 120s), check that at least one device was successfully brought up. Otherwise (e.g. buggy bootloader which does not set the MAC address) there is no point in waiting for carrier. Cc: Micha Nelissen Cc: Holger Brunck Signed-off-by: Gerlando Falauto Signed-off-by: David S. Miller --- net/ipv4/ipconfig.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c index 0da2afc97f32..99ec116bef14 100644 --- a/net/ipv4/ipconfig.c +++ b/net/ipv4/ipconfig.c @@ -253,6 +253,10 @@ static int __init ic_open_devs(void) } } + /* no point in waiting if we could not bring up at least one device */ + if (!ic_first_dev) + goto have_carrier; + /* wait for a carrier on at least one device */ start = jiffies; while (jiffies - start < msecs_to_jiffies(CONF_CARRIER_TIMEOUT)) { -- cgit v1.2.3-70-g09d2 From 50345f1ea9cda4618d9c26e590a97ecd4bc7ac75 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Dec 2011 14:49:04 +0000 Subject: SELinux: Fix RCU deref check warning in sel_netport_insert() Fix the following bug in sel_netport_insert() where rcu_dereference() should be rcu_dereference_protected() as sel_netport_lock is held. =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/selinux/netport.c:127 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by ossec-rootcheck/3323: #0: (sel_netport_lock){+.....}, at: [] sel_netport_sid+0xbb/0x226 stack backtrace: Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095 Call Trace: [] lockdep_rcu_dereference+0xa7/0xb0 [] sel_netport_sid+0x1b7/0x226 [] ? sel_netport_avc_callback+0xbc/0xbc [] selinux_socket_bind+0x115/0x230 [] ? might_fault+0x4e/0x9e [] ? might_fault+0x97/0x9e [] security_socket_bind+0x11/0x13 [] sys_bind+0x56/0x95 [] ? sysret_check+0x27/0x62 [] ? trace_hardirqs_on_caller+0x11e/0x155 [] ? audit_syscall_entry+0x17b/0x1ae [] ? trace_hardirqs_on_thunk+0x3a/0x3f [] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells Acked-by: Paul Moore Acked-by: Eric Dumazet Cc: stable@kernel.org Signed-off-by: James Morris --- security/selinux/netport.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/security/selinux/netport.c b/security/selinux/netport.c index 0b62bd112461..7b9eb1faf68b 100644 --- a/security/selinux/netport.c +++ b/security/selinux/netport.c @@ -123,7 +123,9 @@ static void sel_netport_insert(struct sel_netport *port) if (sel_netport_hash[idx].size == SEL_NETPORT_HASH_BKT_LIMIT) { struct sel_netport *tail; tail = list_entry( - rcu_dereference(sel_netport_hash[idx].list.prev), + rcu_dereference_protected( + sel_netport_hash[idx].list.prev, + lockdep_is_held(&sel_netport_lock)), struct sel_netport, list); list_del_rcu(&tail->list); kfree_rcu(tail, rcu); -- cgit v1.2.3-70-g09d2 From 7b21a202b87b7f18587bd15ee6bdb477fed0fb43 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Wed, 21 Dec 2011 03:54:24 +0000 Subject: firmware: Refer to the co-maintained linux-firmware.git repository David and I are sharing maintenance of this repository. Patches should be sent to both of us. Signed-off-by: Ben Hutchings Signed-off-by: Linus Torvalds --- firmware/README.AddingFirmware | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/firmware/README.AddingFirmware b/firmware/README.AddingFirmware index e24cd8986d8b..ea78c3a17eec 100644 --- a/firmware/README.AddingFirmware +++ b/firmware/README.AddingFirmware @@ -12,7 +12,7 @@ here. This directory is _NOT_ for adding arbitrary new firmware images. The place to add those is the separate linux-firmware repository: - git://git.kernel.org/pub/scm/linux/kernel/git/dwmw2/linux-firmware.git + git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git That repository contains all these firmware images which have been extracted from older drivers, as well various new firmware images which @@ -22,6 +22,7 @@ been permitted to redistribute under separate cover. To submit firmware to that repository, please send either a git binary diff or preferably a git pull request to: David Woodhouse + Ben Hutchings Your commit should include an update to the WHENCE file clearly identifying the licence under which the firmware is available, and -- cgit v1.2.3-70-g09d2 From 9f28a2fc0bd77511f649c0a788c7bf9a5fd04edb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 21 Dec 2011 15:47:16 -0500 Subject: ipv4: reintroduce route cache garbage collector Commit 2c8cec5c10b (ipv4: Cache learned PMTU information in inetpeer) removed IP route cache garbage collector a bit too soon, as this gc was responsible for expired routes cleanup, releasing their neighbour reference. As pointed out by Robert Gladewitz, recent kernels can fill and exhaust their neighbour cache. Reintroduce the garbage collection, since we'll have to wait our neighbour lookups become refcount-less to not depend on this stuff. Reported-by: Robert Gladewitz Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/route.c | 107 +++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 107 insertions(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 46af62363b8c..252c512e8a81 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -120,6 +120,7 @@ static int ip_rt_max_size; static int ip_rt_gc_timeout __read_mostly = RT_GC_TIMEOUT; +static int ip_rt_gc_interval __read_mostly = 60 * HZ; static int ip_rt_gc_min_interval __read_mostly = HZ / 2; static int ip_rt_redirect_number __read_mostly = 9; static int ip_rt_redirect_load __read_mostly = HZ / 50; @@ -133,6 +134,9 @@ static int ip_rt_min_advmss __read_mostly = 256; static int rt_chain_length_max __read_mostly = 20; static int redirect_genid; +static struct delayed_work expires_work; +static unsigned long expires_ljiffies; + /* * Interface to generic destination cache. */ @@ -830,6 +834,97 @@ static int has_noalias(const struct rtable *head, const struct rtable *rth) return ONE; } +static void rt_check_expire(void) +{ + static unsigned int rover; + unsigned int i = rover, goal; + struct rtable *rth; + struct rtable __rcu **rthp; + unsigned long samples = 0; + unsigned long sum = 0, sum2 = 0; + unsigned long delta; + u64 mult; + + delta = jiffies - expires_ljiffies; + expires_ljiffies = jiffies; + mult = ((u64)delta) << rt_hash_log; + if (ip_rt_gc_timeout > 1) + do_div(mult, ip_rt_gc_timeout); + goal = (unsigned int)mult; + if (goal > rt_hash_mask) + goal = rt_hash_mask + 1; + for (; goal > 0; goal--) { + unsigned long tmo = ip_rt_gc_timeout; + unsigned long length; + + i = (i + 1) & rt_hash_mask; + rthp = &rt_hash_table[i].chain; + + if (need_resched()) + cond_resched(); + + samples++; + + if (rcu_dereference_raw(*rthp) == NULL) + continue; + length = 0; + spin_lock_bh(rt_hash_lock_addr(i)); + while ((rth = rcu_dereference_protected(*rthp, + lockdep_is_held(rt_hash_lock_addr(i)))) != NULL) { + prefetch(rth->dst.rt_next); + if (rt_is_expired(rth)) { + *rthp = rth->dst.rt_next; + rt_free(rth); + continue; + } + if (rth->dst.expires) { + /* Entry is expired even if it is in use */ + if (time_before_eq(jiffies, rth->dst.expires)) { +nofree: + tmo >>= 1; + rthp = &rth->dst.rt_next; + /* + * We only count entries on + * a chain with equal hash inputs once + * so that entries for different QOS + * levels, and other non-hash input + * attributes don't unfairly skew + * the length computation + */ + length += has_noalias(rt_hash_table[i].chain, rth); + continue; + } + } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) + goto nofree; + + /* Cleanup aged off entries. */ + *rthp = rth->dst.rt_next; + rt_free(rth); + } + spin_unlock_bh(rt_hash_lock_addr(i)); + sum += length; + sum2 += length*length; + } + if (samples) { + unsigned long avg = sum / samples; + unsigned long sd = int_sqrt(sum2 / samples - avg*avg); + rt_chain_length_max = max_t(unsigned long, + ip_rt_gc_elasticity, + (avg + 4*sd) >> FRACT_BITS); + } + rover = i; +} + +/* + * rt_worker_func() is run in process context. + * we call rt_check_expire() to scan part of the hash table + */ +static void rt_worker_func(struct work_struct *work) +{ + rt_check_expire(); + schedule_delayed_work(&expires_work, ip_rt_gc_interval); +} + /* * Perturbation of rt_genid by a small quantity [1..256] * Using 8 bits of shuffling ensure we can call rt_cache_invalidate() @@ -3178,6 +3273,13 @@ static ctl_table ipv4_route_table[] = { .mode = 0644, .proc_handler = proc_dointvec_jiffies, }, + { + .procname = "gc_interval", + .data = &ip_rt_gc_interval, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_jiffies, + }, { .procname = "redirect_load", .data = &ip_rt_redirect_load, @@ -3388,6 +3490,11 @@ int __init ip_rt_init(void) devinet_init(); ip_fib_init(); + INIT_DELAYED_WORK_DEFERRABLE(&expires_work, rt_worker_func); + expires_ljiffies = jiffies; + schedule_delayed_work(&expires_work, + net_random() % ip_rt_gc_interval + ip_rt_gc_interval); + if (ip_rt_proc_init()) printk(KERN_ERR "Unable to create route proc files\n"); #ifdef CONFIG_XFRM -- cgit v1.2.3-70-g09d2 From c0ed1c14a72ca9ebacd51fb94a8aca488b0d361e Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Wed, 21 Dec 2011 16:48:08 -0500 Subject: net: Add a flow_cache_flush_deferred function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit flow_cach_flush() might sleep but can be called from atomic context via the xfrm garbage collector. So add a flow_cache_flush_deferred() function and use this if the xfrm garbage colector is invoked from within the packet path. Signed-off-by: Steffen Klassert Acked-by: Timo Teräs Signed-off-by: David S. Miller --- include/net/flow.h | 1 + net/core/flow.c | 12 ++++++++++++ net/xfrm/xfrm_policy.c | 18 ++++++++++++++---- 3 files changed, 27 insertions(+), 4 deletions(-) diff --git a/include/net/flow.h b/include/net/flow.h index a09447749e2d..57f15a7f1cdd 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -207,6 +207,7 @@ extern struct flow_cache_object *flow_cache_lookup( u8 dir, flow_resolve_t resolver, void *ctx); extern void flow_cache_flush(void); +extern void flow_cache_flush_deferred(void); extern atomic_t flow_cache_genid; #endif diff --git a/net/core/flow.c b/net/core/flow.c index 8ae42de9c79e..e318c7e98042 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -358,6 +358,18 @@ void flow_cache_flush(void) put_online_cpus(); } +static void flow_cache_flush_task(struct work_struct *work) +{ + flow_cache_flush(); +} + +static DECLARE_WORK(flow_cache_flush_work, flow_cache_flush_task); + +void flow_cache_flush_deferred(void) +{ + schedule_work(&flow_cache_flush_work); +} + static int __cpuinit flow_cache_cpu_prepare(struct flow_cache *fc, int cpu) { struct flow_cache_percpu *fcp = per_cpu_ptr(fc->percpu, cpu); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 2118d6446630..9049a5caeb25 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -2276,8 +2276,6 @@ static void __xfrm_garbage_collect(struct net *net) { struct dst_entry *head, *next; - flow_cache_flush(); - spin_lock_bh(&xfrm_policy_sk_bundle_lock); head = xfrm_policy_sk_bundles; xfrm_policy_sk_bundles = NULL; @@ -2290,6 +2288,18 @@ static void __xfrm_garbage_collect(struct net *net) } } +static void xfrm_garbage_collect(struct net *net) +{ + flow_cache_flush(); + __xfrm_garbage_collect(net); +} + +static void xfrm_garbage_collect_deferred(struct net *net) +{ + flow_cache_flush_deferred(); + __xfrm_garbage_collect(net); +} + static void xfrm_init_pmtu(struct dst_entry *dst) { do { @@ -2422,7 +2432,7 @@ int xfrm_policy_register_afinfo(struct xfrm_policy_afinfo *afinfo) if (likely(dst_ops->neigh_lookup == NULL)) dst_ops->neigh_lookup = xfrm_neigh_lookup; if (likely(afinfo->garbage_collect == NULL)) - afinfo->garbage_collect = __xfrm_garbage_collect; + afinfo->garbage_collect = xfrm_garbage_collect_deferred; xfrm_policy_afinfo[afinfo->family] = afinfo; } write_unlock_bh(&xfrm_policy_afinfo_lock); @@ -2516,7 +2526,7 @@ static int xfrm_dev_event(struct notifier_block *this, unsigned long event, void switch (event) { case NETDEV_DOWN: - __xfrm_garbage_collect(dev_net(dev)); + xfrm_garbage_collect(dev_net(dev)); } return NOTIFY_DONE; } -- cgit v1.2.3-70-g09d2 From abf058e10c2614c36ba217405768e8e74853fc80 Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 21 Dec 2011 17:31:54 -0500 Subject: USB: Fix usb/isp1760 build on sparc This commit: commit 8f5d621543cb064d2989fc223d3c2bc61a43981e Author: Joachim Foerster Date: Mon Oct 10 18:06:54 2011 +0200 usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF . To be able to use the driver on other OF-aware architectures, too. And add necessary OF related #includes to fix compilation error. Signed-off-by: Joachim Foerster Signed-off-by: Greg Kroah-Hartman enabled the build on all CONFIG_OF architectures, but it cannot do this. This driver depends upon CONFIG_OF_IRQ but not all CONFIG_OF platforms support that infrastructure, in particular Sparc does not so the build fails. Please push a patch like the following to Linus so that this code only gets built where it actually should. -------------------- usb/isp1760: Add missing CONFIG_OF_IRQ dependency on OF code. Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-if.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index a7dc1e1d45f2..2ac4ac2e4ef9 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -18,7 +18,7 @@ #include "isp1760-hcd.h" -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) #include #include #include @@ -31,7 +31,7 @@ #include #endif -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) struct isp1760 { struct usb_hcd *hcd; int rst_gpio; @@ -437,7 +437,7 @@ static int __init isp1760_init(void) ret = platform_driver_register(&isp1760_plat_driver); if (!ret) any_ret = 0; -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) ret = platform_driver_register(&isp1760_of_driver); if (!ret) any_ret = 0; @@ -457,7 +457,7 @@ module_init(isp1760_init); static void __exit isp1760_exit(void) { platform_driver_unregister(&isp1760_plat_driver); -#ifdef CONFIG_OF +#if defined(CONFIG_OF) && defined(CONFIG_OF_IRQ) platform_driver_unregister(&isp1760_of_driver); #endif #ifdef CONFIG_PCI -- cgit v1.2.3-70-g09d2 From e6f67b8c05f5e129e126f4409ddac6f25f58ffcb Mon Sep 17 00:00:00 2001 From: Dave Kleikamp Date: Wed, 21 Dec 2011 11:05:48 -0600 Subject: vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL lockdep reports a deadlock in jfs because a special inode's rw semaphore is taken recursively. The mapping's gfp mask is GFP_NOFS, but is not used when __read_cache_page() calls add_to_page_cache_lru(). Signed-off-by: Dave Kleikamp Acked-by: Hugh Dickins Acked-by: Al Viro Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- mm/filemap.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/mm/filemap.c b/mm/filemap.c index c106d3b3cc64..5f0a3c91fdac 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -1828,7 +1828,7 @@ repeat: page = __page_cache_alloc(gfp | __GFP_COLD); if (!page) return ERR_PTR(-ENOMEM); - err = add_to_page_cache_lru(page, mapping, index, GFP_KERNEL); + err = add_to_page_cache_lru(page, mapping, index, gfp); if (unlikely(err)) { page_cache_release(page); if (err == -EEXIST) @@ -1925,10 +1925,7 @@ static struct page *wait_on_page_read(struct page *page) * @gfp: the page allocator flags to use if allocating * * This is the same as "read_mapping_page(mapping, index, NULL)", but with - * any new page allocations done using the specified allocation flags. Note - * that the Radix tree operations will still use GFP_KERNEL, so you can't - * expect to do this atomically or anything like that - but you can pass in - * other page requirements. + * any new page allocations done using the specified allocation flags. * * If the page does not get brought uptodate, return -EIO. */ -- cgit v1.2.3-70-g09d2 From b9eda06f80b0db61a73bd87c6b0eb67d8aca55ad Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Thu, 22 Dec 2011 17:03:29 +1100 Subject: ipv4: using prefetch requires including prefetch.h Signed-off-by: Stephen Rothwell Acked-by: Eric Dumazet Acked-by: David Miller Signed-off-by: Linus Torvalds --- net/ipv4/route.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 252c512e8a81..85cc053d9d6e 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -91,6 +91,7 @@ #include #include #include +#include #include #include #include -- cgit v1.2.3-70-g09d2 From 19d40dcabf1cdf84e1a76c147b7177b5a6c21943 Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 21 Dec 2011 17:38:10 -0500 Subject: pata_of_platform: Add missing CONFIG_OF_IRQ dependency. Signed-off-by: David S. Miller Signed-off-by: Jeff Garzik --- drivers/ata/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 6bdedd7cca2c..cf047c406d92 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -820,7 +820,7 @@ config PATA_PLATFORM config PATA_OF_PLATFORM tristate "OpenFirmware platform device PATA support" - depends on PATA_PLATFORM && OF + depends on PATA_PLATFORM && OF && OF_IRQ help This option enables support for generic directly connected ATA devices commonly found on embedded systems with OpenFirmware -- cgit v1.2.3-70-g09d2 From a13861a28b90541aa207532d237e7a940f1b1c7b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 21 Dec 2011 20:00:32 +0000 Subject: bridge: provide a mtu() method for fake_dst_ops Commit 618f9bc74a039da76 (net: Move mtu handling down to the protocol depended handlers) forgot the bridge netfilter case, adding a NULL dereference in ip_fragment(). Reported-by: Chris Boot CC: Steffen Klassert Signed-off-by: Eric Dumazet Acked-by: Steffen Klassert Signed-off-by: David S. Miller --- net/bridge/br_netfilter.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index d6ec3720c77e..08757dc670a4 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -114,12 +114,18 @@ static struct neighbour *fake_neigh_lookup(const struct dst_entry *dst, const vo return NULL; } +static unsigned int fake_mtu(const struct dst_entry *dst) +{ + return dst->dev->mtu; +} + static struct dst_ops fake_dst_ops = { .family = AF_INET, .protocol = cpu_to_be16(ETH_P_IP), .update_pmtu = fake_update_pmtu, .cow_metrics = fake_cow_metrics, .neigh_lookup = fake_neigh_lookup, + .mtu = fake_mtu, }; /* -- cgit v1.2.3-70-g09d2 From 7838f2ce36b6ab5c13ef20b1857e3bbd567f1759 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Thu, 22 Dec 2011 02:05:07 +0000 Subject: mqprio: Avoid panic if no options are provided Userspace may not provide TCA_OPTIONS, in fact tc currently does so not do so if no arguments are specified on the command line. Return EINVAL instead of panicing. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller --- net/sched/sch_mqprio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/sch_mqprio.c b/net/sched/sch_mqprio.c index f88256cbacbf..28de43092330 100644 --- a/net/sched/sch_mqprio.c +++ b/net/sched/sch_mqprio.c @@ -107,7 +107,7 @@ static int mqprio_init(struct Qdisc *sch, struct nlattr *opt) if (!netif_is_multiqueue(dev)) return -EOPNOTSUPP; - if (nla_len(opt) < sizeof(*qopt)) + if (!opt || nla_len(opt) < sizeof(*qopt)) return -EINVAL; qopt = nla_data(opt); -- cgit v1.2.3-70-g09d2 From e688a604807647c9450f9c12a7cb6d027150a895 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 22 Dec 2011 04:15:53 +0000 Subject: net: introduce DST_NOPEER dst flag Chris Boot reported crashes occurring in ipv6_select_ident(). [ 461.457562] RIP: 0010:[] [] ipv6_select_ident+0x31/0xa7 [ 461.578229] Call Trace: [ 461.580742] [ 461.582870] [] ? udp6_ufo_fragment+0x124/0x1a2 [ 461.589054] [] ? ipv6_gso_segment+0xc0/0x155 [ 461.595140] [] ? skb_gso_segment+0x208/0x28b [ 461.601198] [] ? ipv6_confirm+0x146/0x15e [nf_conntrack_ipv6] [ 461.608786] [] ? nf_iterate+0x41/0x77 [ 461.614227] [] ? dev_hard_start_xmit+0x357/0x543 [ 461.620659] [] ? nf_hook_slow+0x73/0x111 [ 461.626440] [] ? br_parse_ip_options+0x19a/0x19a [bridge] [ 461.633581] [] ? dev_queue_xmit+0x3af/0x459 [ 461.639577] [] ? br_dev_queue_push_xmit+0x72/0x76 [bridge] [ 461.646887] [] ? br_nf_post_routing+0x17d/0x18f [bridge] [ 461.653997] [] ? nf_iterate+0x41/0x77 [ 461.659473] [] ? br_flood+0xfa/0xfa [bridge] [ 461.665485] [] ? nf_hook_slow+0x73/0x111 [ 461.671234] [] ? br_flood+0xfa/0xfa [bridge] [ 461.677299] [] ? nf_bridge_update_protocol+0x20/0x20 [bridge] [ 461.684891] [] ? nf_ct_zone+0xa/0x17 [nf_conntrack] [ 461.691520] [] ? br_flood+0xfa/0xfa [bridge] [ 461.697572] [] ? NF_HOOK.constprop.8+0x3c/0x56 [bridge] [ 461.704616] [] ? nf_bridge_push_encap_header+0x1c/0x26 [bridge] [ 461.712329] [] ? br_nf_forward_finish+0x8a/0x95 [bridge] [ 461.719490] [] ? nf_bridge_pull_encap_header+0x1c/0x27 [bridge] [ 461.727223] [] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge] [ 461.734292] [] ? nf_iterate+0x41/0x77 [ 461.739758] [] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.746203] [] ? nf_hook_slow+0x73/0x111 [ 461.751950] [] ? __br_deliver+0xa0/0xa0 [bridge] [ 461.758378] [] ? NF_HOOK.constprop.4+0x56/0x56 [bridge] This is caused by bridge netfilter special dst_entry (fake_rtable), a special shared entry, where attaching an inetpeer makes no sense. Problem is present since commit 87c48fa3b46 (ipv6: make fragment identifications less predictable) Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and __ip_select_ident() fallback to the 'no peer attached' handling. Reported-by: Chris Boot Tested-by: Chris Boot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/dst.h | 1 + net/bridge/br_netfilter.c | 2 +- net/ipv4/route.c | 4 ++-- net/ipv6/ip6_output.c | 2 +- 4 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/net/dst.h b/include/net/dst.h index 6faec1a60216..75766b42660e 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -53,6 +53,7 @@ struct dst_entry { #define DST_NOHASH 0x0008 #define DST_NOCACHE 0x0010 #define DST_NOCOUNT 0x0020 +#define DST_NOPEER 0x0040 short error; short obsolete; diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index 08757dc670a4..fa8b8f763580 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -147,7 +147,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) rt->dst.dev = br->dev; rt->dst.path = &rt->dst; dst_init_metrics(&rt->dst, br_dst_default_metrics, true); - rt->dst.flags = DST_NOXFRM; + rt->dst.flags = DST_NOXFRM | DST_NOPEER; rt->dst.ops = &fake_dst_ops; } diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 85cc053d9d6e..94cdbc55ca7e 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1367,7 +1367,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more) { struct rtable *rt = (struct rtable *) dst; - if (rt) { + if (rt && !(rt->dst.flags & DST_NOPEER)) { if (rt->peer == NULL) rt_bind_peer(rt, rt->rt_dst, 1); @@ -1378,7 +1378,7 @@ void __ip_select_ident(struct iphdr *iph, struct dst_entry *dst, int more) iph->id = htons(inet_getid(rt->peer, more)); return; } - } else + } else if (!rt) printk(KERN_DEBUG "rt_bind_peer(0) @%p\n", __builtin_return_address(0)); diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index 84d0bd5cac93..ec562713db9b 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -603,7 +603,7 @@ void ipv6_select_ident(struct frag_hdr *fhdr, struct rt6_info *rt) static atomic_t ipv6_fragmentation_id; int old, new; - if (rt) { + if (rt && !(rt->dst.flags & DST_NOPEER)) { struct inet_peer *peer; if (!rt->rt6i_peer) -- cgit v1.2.3-70-g09d2 From a0a129f8b6cff54ab479324a54aefdab5db4f240 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Thu, 22 Dec 2011 13:35:22 +0000 Subject: rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt() Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will cause a kernel oops due to insufficient bounds checking. if (count > 1<<30) { /* Enforce a limit to prevent overflow */ return -EINVAL; } count = roundup_pow_of_two(count); table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count)); Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as: ... + (count * sizeof(struct rps_dev_flow)) where sizeof(struct rps_dev_flow) is 8. (1 << 30) * 8 will overflow 32 bits. This patch replaces the magic number (1 << 30) with a symbolic bound. Suggested-by: Eric Dumazet Signed-off-by: Xi Wang Signed-off-by: David S. Miller --- net/core/net-sysfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c index c71c434a4c05..385aefe53648 100644 --- a/net/core/net-sysfs.c +++ b/net/core/net-sysfs.c @@ -665,11 +665,14 @@ static ssize_t store_rps_dev_flow_table_cnt(struct netdev_rx_queue *queue, if (count) { int i; - if (count > 1<<30) { + if (count > INT_MAX) + return -EINVAL; + count = roundup_pow_of_two(count); + if (count > (ULONG_MAX - sizeof(struct rps_dev_flow_table)) + / sizeof(struct rps_dev_flow)) { /* Enforce a limit to prevent overflow */ return -EINVAL; } - count = roundup_pow_of_two(count); table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count)); if (!table) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 0fd7bac6b6157eed6cf0cb86a1e88ba29e57c033 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 21 Dec 2011 07:11:44 +0000 Subject: net: relax rcvbuf limits skb->truesize might be big even for a small packet. Its even bigger after commit 87fb4b7b533 (net: more accurate skb truesize) and big MTU. We should allow queueing at least one packet per receiver, even with a low RCVBUF setting. Reported-by: Michal Simek Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/sock.h | 4 +++- net/core/sock.c | 6 +----- net/packet/af_packet.c | 6 ++---- 3 files changed, 6 insertions(+), 10 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index abb6e0f0c3c3..32e39371fba6 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -637,12 +637,14 @@ static inline void __sk_add_backlog(struct sock *sk, struct sk_buff *skb) /* * Take into account size of receive queue and backlog queue + * Do not take into account this skb truesize, + * to allow even a single big packet to come. */ static inline bool sk_rcvqueues_full(const struct sock *sk, const struct sk_buff *skb) { unsigned int qsize = sk->sk_backlog.len + atomic_read(&sk->sk_rmem_alloc); - return qsize + skb->truesize > sk->sk_rcvbuf; + return qsize > sk->sk_rcvbuf; } /* The per-socket spinlock must be held here. */ diff --git a/net/core/sock.c b/net/core/sock.c index 4ed7b1d12f5e..b23f174ab84c 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -288,11 +288,7 @@ int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb) unsigned long flags; struct sk_buff_head *list = &sk->sk_receive_queue; - /* Cast sk->rcvbuf to unsigned... It's pointless, but reduces - number of warnings when compiling with -W --ANK - */ - if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >= - (unsigned)sk->sk_rcvbuf) { + if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) { atomic_inc(&sk->sk_drops); trace_sock_rcvqueue_full(sk, skb); return -ENOMEM; diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 82a6f34d39d0..3891702b81df 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1630,8 +1630,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev, if (snaplen > res) snaplen = res; - if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >= - (unsigned)sk->sk_rcvbuf) + if (atomic_read(&sk->sk_rmem_alloc) >= sk->sk_rcvbuf) goto drop_n_acct; if (skb_shared(skb)) { @@ -1762,8 +1761,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, if (po->tp_version <= TPACKET_V2) { if (macoff + snaplen > po->rx_ring.frame_size) { if (po->copy_thresh && - atomic_read(&sk->sk_rmem_alloc) + skb->truesize - < (unsigned)sk->sk_rcvbuf) { + atomic_read(&sk->sk_rmem_alloc) < sk->sk_rcvbuf) { if (skb_shared(skb)) { copy_skb = skb_clone(skb, GFP_ATOMIC); } else { -- cgit v1.2.3-70-g09d2 From 0354b48f633ae435acbc01b470a1ce8cfeff3e9f Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Fri, 16 Dec 2011 18:35:15 +0100 Subject: netfilter: xt_connbytes: handle negation correctly "! --connbytes 23:42" should match if the packet/byte count is not in range. As there is no explict "invert match" toggle in the match structure, userspace swaps the from and to arguments (i.e., as if "--connbytes 42:23" were given). However, "what <= 23 && what >= 42" will always be false. Change things so we use "||" in case "from" is larger than "to". This change may look like it breaks backwards compatibility when "to" is 0. However, older iptables binaries will refuse "connbytes 42:0", and current releases treat it to mean "! --connbytes 0:42", so we should be fine. Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_connbytes.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/netfilter/xt_connbytes.c b/net/netfilter/xt_connbytes.c index 5b138506690e..9ddf1c3bfb39 100644 --- a/net/netfilter/xt_connbytes.c +++ b/net/netfilter/xt_connbytes.c @@ -87,10 +87,10 @@ connbytes_mt(const struct sk_buff *skb, struct xt_action_param *par) break; } - if (sinfo->count.to) + if (sinfo->count.to >= sinfo->count.from) return what <= sinfo->count.to && what >= sinfo->count.from; - else - return what >= sinfo->count.from; + else /* inverted */ + return what < sinfo->count.to || what > sinfo->count.from; } static int connbytes_mt_check(const struct xt_mtchk_param *par) -- cgit v1.2.3-70-g09d2