From 58498ee3e573dc03be651b6839dbdf865ae7ee38 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 9 Dec 2014 10:18:49 +0100 Subject: s390/ftrace: add code replacement sanity checks Always verify that the to be replaced code matches what we expect to see. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/ftrace.c | 95 ++++++++++++++++++++++++----------------------- 1 file changed, 49 insertions(+), 46 deletions(-) diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index b86bb8823f15..3dabcae40e04 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -59,62 +59,65 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr, int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, unsigned long addr) { - struct ftrace_insn insn; - unsigned short op; - void *from, *to; - size_t size; - - ftrace_generate_nop_insn(&insn); - size = sizeof(insn); - from = &insn; - to = (void *) rec->ip; - if (probe_kernel_read(&op, (void *) rec->ip, sizeof(op))) + struct ftrace_insn orig, new, old; + + if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old))) return -EFAULT; - /* - * If we find a breakpoint instruction, a kprobe has been placed - * at the beginning of the function. We write the constant - * KPROBE_ON_FTRACE_NOP into the remaining four bytes of the original - * instruction so that the kprobes handler can execute a nop, if it - * reaches this breakpoint. - */ - if (op == BREAKPOINT_INSTRUCTION) { - size -= 2; - from += 2; - to += 2; - insn.disp = KPROBE_ON_FTRACE_NOP; + if (addr == MCOUNT_ADDR) { + /* Initial code replacement; we expect to see stg r14,8(r15) */ + orig.opc = 0xe3e0; + orig.disp = 0xf0080024; + ftrace_generate_nop_insn(&new); + } else if (old.opc == BREAKPOINT_INSTRUCTION) { + /* + * If we find a breakpoint instruction, a kprobe has been + * placed at the beginning of the function. We write the + * constant KPROBE_ON_FTRACE_NOP into the remaining four + * bytes of the original instruction so that the kprobes + * handler can execute a nop, if it reaches this breakpoint. + */ + new.opc = orig.opc = BREAKPOINT_INSTRUCTION; + orig.disp = KPROBE_ON_FTRACE_CALL; + new.disp = KPROBE_ON_FTRACE_NOP; + } else { + /* Replace ftrace call with a nop. */ + ftrace_generate_call_insn(&orig, rec->ip); + ftrace_generate_nop_insn(&new); } - if (probe_kernel_write(to, from, size)) + /* Verify that the to be replaced code matches what we expect. */ + if (memcmp(&orig, &old, sizeof(old))) + return -EINVAL; + if (probe_kernel_write((void *) rec->ip, &new, sizeof(new))) return -EPERM; return 0; } int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr) { - struct ftrace_insn insn; - unsigned short op; - void *from, *to; - size_t size; - - ftrace_generate_call_insn(&insn, rec->ip); - size = sizeof(insn); - from = &insn; - to = (void *) rec->ip; - if (probe_kernel_read(&op, (void *) rec->ip, sizeof(op))) + struct ftrace_insn orig, new, old; + + if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old))) return -EFAULT; - /* - * If we find a breakpoint instruction, a kprobe has been placed - * at the beginning of the function. We write the constant - * KPROBE_ON_FTRACE_CALL into the remaining four bytes of the original - * instruction so that the kprobes handler can execute a brasl if it - * reaches this breakpoint. - */ - if (op == BREAKPOINT_INSTRUCTION) { - size -= 2; - from += 2; - to += 2; - insn.disp = KPROBE_ON_FTRACE_CALL; + if (old.opc == BREAKPOINT_INSTRUCTION) { + /* + * If we find a breakpoint instruction, a kprobe has been + * placed at the beginning of the function. We write the + * constant KPROBE_ON_FTRACE_CALL into the remaining four + * bytes of the original instruction so that the kprobes + * handler can execute a brasl if it reaches this breakpoint. + */ + new.opc = orig.opc = BREAKPOINT_INSTRUCTION; + orig.disp = KPROBE_ON_FTRACE_NOP; + new.disp = KPROBE_ON_FTRACE_CALL; + } else { + /* Replace nop with an ftrace call. */ + ftrace_generate_nop_insn(&orig); + ftrace_generate_call_insn(&new, rec->ip); } - if (probe_kernel_write(to, from, size)) + /* Verify that the to be replaced code matches what we expect. */ + if (memcmp(&orig, &old, sizeof(old))) + return -EINVAL; + if (probe_kernel_write((void *) rec->ip, &new, sizeof(new))) return -EPERM; return 0; } -- cgit v1.2.3-70-g09d2 From eba8452525e3fd0b982f78365dea8bd2ce11a20a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Dec 2014 12:46:35 +0100 Subject: s390/pci: add missing address space annotation Signed-off-by: Heiko Carstens --- arch/s390/pci/pci_mmio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c index 62c5ea6d8682..8aa271b3d1ad 100644 --- a/arch/s390/pci/pci_mmio.c +++ b/arch/s390/pci/pci_mmio.c @@ -55,7 +55,7 @@ SYSCALL_DEFINE3(s390_pci_mmio_write, unsigned long, mmio_addr, ret = get_pfn(mmio_addr, VM_WRITE, &pfn); if (ret) goto out; - io_addr = (void *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); + io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); ret = -EFAULT; if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE) @@ -96,7 +96,7 @@ SYSCALL_DEFINE3(s390_pci_mmio_read, unsigned long, mmio_addr, ret = get_pfn(mmio_addr, VM_READ, &pfn); if (ret) goto out; - io_addr = (void *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); + io_addr = (void __iomem *)((pfn << PAGE_SHIFT) | (mmio_addr & ~PAGE_MASK)); ret = -EFAULT; if ((unsigned long) io_addr < ZPCI_IOMAP_ADDR_BASE) -- cgit v1.2.3-70-g09d2 From 8d1f211ebbdfd57843a52fa7efe34251530beec1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Dec 2014 12:52:00 +0100 Subject: s390/disassembler: remove indentical initializer Remove one of the two identical initializer entries. Signed-off-by: Heiko Carstens --- arch/s390/kernel/dis.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index f3762937dd82..d46d0b0b2cda 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -226,7 +226,6 @@ static const struct s390_operand operands[] = [U16_32] = { 16, 32, 0 }, [J16_16] = { 16, 16, OPERAND_PCREL }, [J16_32] = { 16, 32, OPERAND_PCREL }, - [I16_32] = { 16, 32, OPERAND_SIGNED }, [I24_24] = { 24, 24, OPERAND_SIGNED }, [J32_16] = { 32, 16, OPERAND_PCREL }, [I32_16] = { 32, 16, OPERAND_SIGNED }, -- cgit v1.2.3-70-g09d2 From 925dfc020a41ce484172a43b603437e58aecd1c1 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Dec 2014 13:04:21 +0100 Subject: s390/pgtable: add unsigned long casts Get rid of warnings like this one: warning: constant 0xffe0000000000000 is so big it is unsigned long Signed-off-by: Heiko Carstens --- arch/s390/mm/pgtable.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 601deb85d2a0..47cbca079740 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -527,7 +527,7 @@ int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr) table += (gaddr >> 53) & 0x7ff; if ((*table & _REGION_ENTRY_INVALID) && gmap_alloc_table(gmap, table, _REGION2_ENTRY_EMPTY, - gaddr & 0xffe0000000000000)) + gaddr & 0xffe0000000000000UL)) return -ENOMEM; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); } @@ -535,7 +535,7 @@ int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr) table += (gaddr >> 42) & 0x7ff; if ((*table & _REGION_ENTRY_INVALID) && gmap_alloc_table(gmap, table, _REGION3_ENTRY_EMPTY, - gaddr & 0xfffffc0000000000)) + gaddr & 0xfffffc0000000000UL)) return -ENOMEM; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); } @@ -543,7 +543,7 @@ int __gmap_link(struct gmap *gmap, unsigned long gaddr, unsigned long vmaddr) table += (gaddr >> 31) & 0x7ff; if ((*table & _REGION_ENTRY_INVALID) && gmap_alloc_table(gmap, table, _SEGMENT_ENTRY_EMPTY, - gaddr & 0xffffffff80000000)) + gaddr & 0xffffffff80000000UL)) return -ENOMEM; table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN); } -- cgit v1.2.3-70-g09d2 From e0a50545480de0936ab867168d9bd086e56f465c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 12 Dec 2014 13:11:08 +0100 Subject: s390/signal: add sys_sigreturn and sys_rt_sigreturn declarations Get rid of sparse warnings like this one: arch/s390/kernel/signal.c:244:1: warning: symbol 'sys_sigreturn' was not declared. Should it be static? Signed-off-by: Heiko Carstens --- arch/s390/kernel/entry.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/entry.h b/arch/s390/kernel/entry.h index 8e61393c8275..834df047d35f 100644 --- a/arch/s390/kernel/entry.h +++ b/arch/s390/kernel/entry.h @@ -71,9 +71,11 @@ struct s390_mmap_arg_struct; struct fadvise64_64_args; struct old_sigaction; +long sys_rt_sigreturn(void); +long sys_sigreturn(void); + long sys_s390_personality(unsigned int personality); long sys_s390_runtime_instr(int command, int signum); - long sys_s390_pci_mmio_write(unsigned long, const void __user *, size_t); long sys_s390_pci_mmio_read(unsigned long, void __user *, size_t); #endif /* _ENTRY_H */ -- cgit v1.2.3-70-g09d2 From 8ebd51a705c56520481f2b813790dc5afdb0a751 Mon Sep 17 00:00:00 2001 From: Rickard Strandqvist Date: Sat, 20 Dec 2014 13:27:49 +0100 Subject: s390/cio: idset.c: remove some unused functions Removes some functions that are not used anywhere: idset_clear() idset_sch_get_first() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/cio/idset.c | 20 -------------------- drivers/s390/cio/idset.h | 2 -- 2 files changed, 22 deletions(-) diff --git a/drivers/s390/cio/idset.c b/drivers/s390/cio/idset.c index 5a999084a229..b3e06a7b9480 100644 --- a/drivers/s390/cio/idset.c +++ b/drivers/s390/cio/idset.c @@ -38,11 +38,6 @@ void idset_free(struct idset *set) vfree(set); } -void idset_clear(struct idset *set) -{ - memset(set->bitmap, 0, bitmap_size(set->num_ssid, set->num_id)); -} - void idset_fill(struct idset *set) { memset(set->bitmap, 0xff, bitmap_size(set->num_ssid, set->num_id)); @@ -103,21 +98,6 @@ int idset_sch_contains(struct idset *set, struct subchannel_id schid) return idset_contains(set, schid.ssid, schid.sch_no); } -int idset_sch_get_first(struct idset *set, struct subchannel_id *schid) -{ - int ssid = 0; - int id = 0; - int rc; - - rc = idset_get_first(set, &ssid, &id); - if (rc) { - init_subchannel_id(schid); - schid->ssid = ssid; - schid->sch_no = id; - } - return rc; -} - int idset_is_empty(struct idset *set) { return bitmap_empty(set->bitmap, set->num_ssid * set->num_id); diff --git a/drivers/s390/cio/idset.h b/drivers/s390/cio/idset.h index 06d3bc01bb09..22b58104683b 100644 --- a/drivers/s390/cio/idset.h +++ b/drivers/s390/cio/idset.h @@ -11,7 +11,6 @@ struct idset; void idset_free(struct idset *set); -void idset_clear(struct idset *set); void idset_fill(struct idset *set); struct idset *idset_sch_new(void); @@ -19,7 +18,6 @@ void idset_sch_add(struct idset *set, struct subchannel_id id); void idset_sch_del(struct idset *set, struct subchannel_id id); void idset_sch_del_subseq(struct idset *set, struct subchannel_id schid); int idset_sch_contains(struct idset *set, struct subchannel_id id); -int idset_sch_get_first(struct idset *set, struct subchannel_id *id); int idset_is_empty(struct idset *set); void idset_add_set(struct idset *to, struct idset *from); -- cgit v1.2.3-70-g09d2 From 47523c983f55448c3a09cc3f1a885bf81cd422e3 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 22 Dec 2014 10:07:04 +0100 Subject: s390: keep Kconfig sorted Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 68b68d755fdf..e79c3eab40b9 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -66,6 +66,7 @@ config S390 select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_SG_CHAIN select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_INLINE_READ_LOCK select ARCH_INLINE_READ_LOCK_BH @@ -151,7 +152,6 @@ config S390 select TTY select VIRT_CPU_ACCOUNTING select VIRT_TO_BUS - select ARCH_HAS_SG_CHAIN config SCHED_OMIT_FRAME_POINTER def_bool y -- cgit v1.2.3-70-g09d2 From fbf87dff6706d412fe69b8158f7ae415e5e7380b Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Sat, 3 Jan 2015 17:29:07 +0800 Subject: s390/sclp: fix declaration of _sclp_print_early() _sclp_print_early() has return value: at present, return 0 for OK, 1 for failure. It returns '%r2', so use 'long' as return value (upper caller can check '%r2' directly). The related warning: CC arch/s390/boot/compressed/misc.o arch/s390/boot/compressed/misc.c:66:8: warning: type defaults to 'int' in declaration of '_sclp_print_early' [-Wimplicit-int] extern _sclp_print_early(const char *); ^ At present, _sclp_print_early() is only used by puts(), so can still remain its declaration in 'misc.c' file. [heiko.carstens@de.ibm.com]: move declaration to sclp.h header file Signed-off-by: Chen Gang Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/boot/compressed/misc.c | 3 +-- arch/s390/include/asm/sclp.h | 2 ++ 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c index 57cbaff1f397..42506b371b74 100644 --- a/arch/s390/boot/compressed/misc.c +++ b/arch/s390/boot/compressed/misc.c @@ -8,6 +8,7 @@ #include #include +#include #include #include "sizes.h" @@ -63,8 +64,6 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/decompress_unxz.c" #endif -extern _sclp_print_early(const char *); - static int puts(const char *s) { _sclp_print_early(s); diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h index 1aba89b53cb9..b6f8066789c1 100644 --- a/arch/s390/include/asm/sclp.h +++ b/arch/s390/include/asm/sclp.h @@ -68,4 +68,6 @@ void sclp_early_detect(void); int sclp_has_siif(void); unsigned int sclp_get_ibc(void); +long _sclp_print_early(const char *); + #endif /* _ASM_S390_SCLP_H */ -- cgit v1.2.3-70-g09d2 From a7e75d434b53b45ae60779903904d4fbdbd145a5 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 5 Jan 2015 10:10:14 +0100 Subject: s390/sclp: sign extend return value of _sclp_print_early() _sclp_print_early() has a return value, but misses to sign extend it if called from 64 bit code. This is not really a bug, since currently no caller cares what the return value is. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/sclp.S | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index a41f2c99dcc8..7e77e03378f3 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -294,7 +294,8 @@ ENTRY(_sclp_print_early) #ifdef CONFIG_64BIT tm LC_AR_MODE_ID,1 jno .Lesa3 - lmh %r6,%r15,96(%r15) # store upper register halves + lgfr %r2,%r2 # sign extend return value + lmh %r6,%r15,96(%r15) # restore upper register halves ahi %r15,80 .Lesa3: #endif -- cgit v1.2.3-70-g09d2 From 91c0837e6dee8c694c8849c70e1f0f770d92d072 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 5 Jan 2015 04:29:18 -0800 Subject: s390: remove unnecessary KERN_CONT This has no effect as KERN_CONT is an empty string, It's probably just a missing conversion artifact as the other pr_cont uses in the same file don't have this prefix. Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 811937bb90be..232c14ea4269 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -171,7 +171,7 @@ static void dump_pagetable(unsigned long asce, unsigned long address) table = table + ((address >> 20) & 0x7ff); if (bad_address(table)) goto bad; - pr_cont(KERN_CONT "S:%016lx ", *table); + pr_cont("S:%016lx ", *table); if (*table & (_SEGMENT_ENTRY_INVALID | _SEGMENT_ENTRY_LARGE)) goto out; table = (unsigned long *)(*table & _SEGMENT_ENTRY_ORIGIN); -- cgit v1.2.3-70-g09d2 From e6a67ad0e29087201536792f7d5cecec4ff6fc64 Mon Sep 17 00:00:00 2001 From: Chen Gang Date: Thu, 1 Jan 2015 22:56:02 +0800 Subject: s390/crypto: remove 'const' to avoid compiler warnings In aes_encrypt() and aes_decrypt(), need let 'sctx->key' be modified, so remove 'const' for it. The related warnings: CC [M] arch/s390/crypto/aes_s390.o arch/s390/crypto/aes_s390.c: In function 'aes_encrypt': arch/s390/crypto/aes_s390.c:146:37: warning: passing argument 2 of 'crypt_s390_km' discards 'const' qualifier from pointer target type [-Wdiscarded-array-qualifiers] crypt_s390_km(KM_AES_128_ENCRYPT, &sctx->key, out, in, ^ ... In file included from arch/s390/crypto/aes_s390.c:29:0: arch/s390/crypto/crypt_s390.h:154:19: note: expected 'void *' but argument is of type 'const u8 (*)[32] {aka const unsigned char (*)[32]}' static inline int crypt_s390_km(long func, void *param, ^ Signed-off-by: Chen Gang Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/crypto/aes_s390.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/s390/crypto/aes_s390.c b/arch/s390/crypto/aes_s390.c index 1f272b24fc0b..5566ce80abdb 100644 --- a/arch/s390/crypto/aes_s390.c +++ b/arch/s390/crypto/aes_s390.c @@ -134,7 +134,7 @@ static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); if (unlikely(need_fallback(sctx->key_len))) { crypto_cipher_encrypt_one(sctx->fallback.cip, out, in); @@ -159,7 +159,7 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in) { - const struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); + struct s390_aes_ctx *sctx = crypto_tfm_ctx(tfm); if (unlikely(need_fallback(sctx->key_len))) { crypto_cipher_decrypt_one(sctx->fallback.cip, out, in); -- cgit v1.2.3-70-g09d2 From d97d929f06d0e072cd36fba6bd9d25b29bae34fd Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Thu, 8 Jan 2015 07:41:52 +0000 Subject: s390: move cacheinfo sysfs to generic cacheinfo infrastructure This patch removes the redundant sysfs cacheinfo code by reusing the newly introduced generic cacheinfo infrastructure through the commit 246246cbde5e ("drivers: base: support cpu cache information interface to userspace via sysfs") Signed-off-by: Sudeep Holla Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/cache.c | 388 +++++++++++------------------------------------ 1 file changed, 92 insertions(+), 296 deletions(-) diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c index c0b03c28d157..fe21f074cf9f 100644 --- a/arch/s390/kernel/cache.c +++ b/arch/s390/kernel/cache.c @@ -5,37 +5,11 @@ * Author(s): Heiko Carstens */ -#include #include -#include -#include -#include #include +#include #include -struct cache { - unsigned long size; - unsigned int line_size; - unsigned int associativity; - unsigned int nr_sets; - unsigned int level : 3; - unsigned int type : 2; - unsigned int private : 1; - struct list_head list; -}; - -struct cache_dir { - struct kobject *kobj; - struct cache_index_dir *index; -}; - -struct cache_index_dir { - struct kobject kobj; - int cpu; - struct cache *cache; - struct cache_index_dir *next; -}; - enum { CACHE_SCOPE_NOTEXISTS, CACHE_SCOPE_PRIVATE, @@ -44,10 +18,10 @@ enum { }; enum { - CACHE_TYPE_SEPARATE, - CACHE_TYPE_DATA, - CACHE_TYPE_INSTRUCTION, - CACHE_TYPE_UNIFIED, + CTYPE_SEPARATE, + CTYPE_DATA, + CTYPE_INSTRUCTION, + CTYPE_UNIFIED, }; enum { @@ -70,39 +44,59 @@ struct cache_info { }; #define CACHE_MAX_LEVEL 8 - union cache_topology { struct cache_info ci[CACHE_MAX_LEVEL]; unsigned long long raw; }; static const char * const cache_type_string[] = { - "Data", + "", "Instruction", + "Data", + "", "Unified", }; -static struct cache_dir *cache_dir_cpu[NR_CPUS]; -static LIST_HEAD(cache_list); +static const enum cache_type cache_type_map[] = { + [CTYPE_SEPARATE] = CACHE_TYPE_SEPARATE, + [CTYPE_DATA] = CACHE_TYPE_DATA, + [CTYPE_INSTRUCTION] = CACHE_TYPE_INST, + [CTYPE_UNIFIED] = CACHE_TYPE_UNIFIED, +}; void show_cacheinfo(struct seq_file *m) { - struct cache *cache; - int index = 0; + int cpu = smp_processor_id(), idx; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + struct cacheinfo *cache; - list_for_each_entry(cache, &cache_list, list) { - seq_printf(m, "cache%-11d: ", index); + for (idx = 0; idx < this_cpu_ci->num_leaves; idx++) { + cache = this_cpu_ci->info_list + idx; + seq_printf(m, "cache%-11d: ", idx); seq_printf(m, "level=%d ", cache->level); seq_printf(m, "type=%s ", cache_type_string[cache->type]); - seq_printf(m, "scope=%s ", cache->private ? "Private" : "Shared"); - seq_printf(m, "size=%luK ", cache->size >> 10); - seq_printf(m, "line_size=%u ", cache->line_size); - seq_printf(m, "associativity=%d", cache->associativity); + seq_printf(m, "scope=%s ", + cache->disable_sysfs ? "Shared" : "Private"); + seq_printf(m, "size=%dK ", cache->size >> 10); + seq_printf(m, "line_size=%u ", cache->coherency_line_size); + seq_printf(m, "associativity=%d", cache->ways_of_associativity); seq_puts(m, "\n"); - index++; } } +static inline enum cache_type get_cache_type(struct cache_info *ci, int level) +{ + if (level >= CACHE_MAX_LEVEL) + return CACHE_TYPE_NOCACHE; + + ci += level; + + if (ci->scope != CACHE_SCOPE_SHARED && ci->scope != CACHE_SCOPE_PRIVATE) + return CACHE_TYPE_NOCACHE; + + return cache_type_map[ci->type]; +} + static inline unsigned long ecag(int ai, int li, int ti) { unsigned long cmd, val; @@ -113,277 +107,79 @@ static inline unsigned long ecag(int ai, int li, int ti) return val; } -static int __init cache_add(int level, int private, int type) +static void ci_leaf_init(struct cacheinfo *this_leaf, int private, + enum cache_type type, unsigned int level) { - struct cache *cache; - int ti; + int ti, num_sets; + int cpu = smp_processor_id(); - cache = kzalloc(sizeof(*cache), GFP_KERNEL); - if (!cache) - return -ENOMEM; - if (type == CACHE_TYPE_INSTRUCTION) + if (type == CACHE_TYPE_INST) ti = CACHE_TI_INSTRUCTION; else ti = CACHE_TI_UNIFIED; - cache->size = ecag(EXTRACT_SIZE, level, ti); - cache->line_size = ecag(EXTRACT_LINE_SIZE, level, ti); - cache->associativity = ecag(EXTRACT_ASSOCIATIVITY, level, ti); - cache->nr_sets = cache->size / cache->associativity; - cache->nr_sets /= cache->line_size; - cache->private = private; - cache->level = level + 1; - cache->type = type - 1; - list_add_tail(&cache->list, &cache_list); - return 0; -} - -static void __init cache_build_info(void) -{ - struct cache *cache, *next; - union cache_topology ct; - int level, private, rc; - - ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0); - for (level = 0; level < CACHE_MAX_LEVEL; level++) { - switch (ct.ci[level].scope) { - case CACHE_SCOPE_SHARED: - private = 0; - break; - case CACHE_SCOPE_PRIVATE: - private = 1; - break; - default: - return; - } - if (ct.ci[level].type == CACHE_TYPE_SEPARATE) { - rc = cache_add(level, private, CACHE_TYPE_DATA); - rc |= cache_add(level, private, CACHE_TYPE_INSTRUCTION); - } else { - rc = cache_add(level, private, ct.ci[level].type); - } - if (rc) - goto error; - } - return; -error: - list_for_each_entry_safe(cache, next, &cache_list, list) { - list_del(&cache->list); - kfree(cache); - } -} - -static struct cache_dir *cache_create_cache_dir(int cpu) -{ - struct cache_dir *cache_dir; - struct kobject *kobj = NULL; - struct device *dev; - - dev = get_cpu_device(cpu); - if (!dev) - goto out; - kobj = kobject_create_and_add("cache", &dev->kobj); - if (!kobj) - goto out; - cache_dir = kzalloc(sizeof(*cache_dir), GFP_KERNEL); - if (!cache_dir) - goto out; - cache_dir->kobj = kobj; - cache_dir_cpu[cpu] = cache_dir; - return cache_dir; -out: - kobject_put(kobj); - return NULL; -} - -static struct cache_index_dir *kobj_to_cache_index_dir(struct kobject *kobj) -{ - return container_of(kobj, struct cache_index_dir, kobj); -} - -static void cache_index_release(struct kobject *kobj) -{ - struct cache_index_dir *index; - - index = kobj_to_cache_index_dir(kobj); - kfree(index); -} - -static ssize_t cache_index_show(struct kobject *kobj, - struct attribute *attr, char *buf) -{ - struct kobj_attribute *kobj_attr; - - kobj_attr = container_of(attr, struct kobj_attribute, attr); - return kobj_attr->show(kobj, kobj_attr, buf); -} - -#define DEFINE_CACHE_ATTR(_name, _format, _value) \ -static ssize_t cache_##_name##_show(struct kobject *kobj, \ - struct kobj_attribute *attr, \ - char *buf) \ -{ \ - struct cache_index_dir *index; \ - \ - index = kobj_to_cache_index_dir(kobj); \ - return sprintf(buf, _format, _value); \ -} \ -static struct kobj_attribute cache_##_name##_attr = \ - __ATTR(_name, 0444, cache_##_name##_show, NULL); -DEFINE_CACHE_ATTR(size, "%luK\n", index->cache->size >> 10); -DEFINE_CACHE_ATTR(coherency_line_size, "%u\n", index->cache->line_size); -DEFINE_CACHE_ATTR(number_of_sets, "%u\n", index->cache->nr_sets); -DEFINE_CACHE_ATTR(ways_of_associativity, "%u\n", index->cache->associativity); -DEFINE_CACHE_ATTR(type, "%s\n", cache_type_string[index->cache->type]); -DEFINE_CACHE_ATTR(level, "%d\n", index->cache->level); + this_leaf->level = level + 1; + this_leaf->type = type; + this_leaf->coherency_line_size = ecag(EXTRACT_LINE_SIZE, level, ti); + this_leaf->ways_of_associativity = ecag(EXTRACT_ASSOCIATIVITY, + level, ti); + this_leaf->size = ecag(EXTRACT_SIZE, level, ti); -static ssize_t shared_cpu_map_func(struct kobject *kobj, int type, char *buf) -{ - struct cache_index_dir *index; - int len; - - index = kobj_to_cache_index_dir(kobj); - len = type ? - cpulist_scnprintf(buf, PAGE_SIZE - 2, cpumask_of(index->cpu)) : - cpumask_scnprintf(buf, PAGE_SIZE - 2, cpumask_of(index->cpu)); - len += sprintf(&buf[len], "\n"); - return len; -} - -static ssize_t shared_cpu_map_show(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) -{ - return shared_cpu_map_func(kobj, 0, buf); + num_sets = this_leaf->size / this_leaf->coherency_line_size; + num_sets /= this_leaf->ways_of_associativity; + this_leaf->number_of_sets = num_sets; + cpumask_set_cpu(cpu, &this_leaf->shared_cpu_map); + if (!private) + this_leaf->disable_sysfs = true; } -static struct kobj_attribute cache_shared_cpu_map_attr = - __ATTR(shared_cpu_map, 0444, shared_cpu_map_show, NULL); -static ssize_t shared_cpu_list_show(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) +int init_cache_level(unsigned int cpu) { - return shared_cpu_map_func(kobj, 1, buf); -} -static struct kobj_attribute cache_shared_cpu_list_attr = - __ATTR(shared_cpu_list, 0444, shared_cpu_list_show, NULL); - -static struct attribute *cache_index_default_attrs[] = { - &cache_type_attr.attr, - &cache_size_attr.attr, - &cache_number_of_sets_attr.attr, - &cache_ways_of_associativity_attr.attr, - &cache_level_attr.attr, - &cache_coherency_line_size_attr.attr, - &cache_shared_cpu_map_attr.attr, - &cache_shared_cpu_list_attr.attr, - NULL, -}; - -static const struct sysfs_ops cache_index_ops = { - .show = cache_index_show, -}; - -static struct kobj_type cache_index_type = { - .sysfs_ops = &cache_index_ops, - .release = cache_index_release, - .default_attrs = cache_index_default_attrs, -}; - -static int cache_create_index_dir(struct cache_dir *cache_dir, - struct cache *cache, int index, int cpu) -{ - struct cache_index_dir *index_dir; - int rc; - - index_dir = kzalloc(sizeof(*index_dir), GFP_KERNEL); - if (!index_dir) - return -ENOMEM; - index_dir->cache = cache; - index_dir->cpu = cpu; - rc = kobject_init_and_add(&index_dir->kobj, &cache_index_type, - cache_dir->kobj, "index%d", index); - if (rc) - goto out; - index_dir->next = cache_dir->index; - cache_dir->index = index_dir; - return 0; -out: - kfree(index_dir); - return rc; -} + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + unsigned int level = 0, leaves = 0; + union cache_topology ct; + enum cache_type ctype; -static int cache_add_cpu(int cpu) -{ - struct cache_dir *cache_dir; - struct cache *cache; - int rc, index = 0; + if (!this_cpu_ci) + return -EINVAL; - if (list_empty(&cache_list)) - return 0; - cache_dir = cache_create_cache_dir(cpu); - if (!cache_dir) - return -ENOMEM; - list_for_each_entry(cache, &cache_list, list) { - if (!cache->private) + ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0); + do { + ctype = get_cache_type(&ct.ci[0], level); + if (ctype == CACHE_TYPE_NOCACHE) break; - rc = cache_create_index_dir(cache_dir, cache, index, cpu); - if (rc) - return rc; - index++; - } - return 0; -} + /* Separate instruction and data caches */ + leaves += (ctype == CACHE_TYPE_SEPARATE) ? 2 : 1; + } while (++level < CACHE_MAX_LEVEL); -static void cache_remove_cpu(int cpu) -{ - struct cache_index_dir *index, *next; - struct cache_dir *cache_dir; + this_cpu_ci->num_levels = level; + this_cpu_ci->num_leaves = leaves; - cache_dir = cache_dir_cpu[cpu]; - if (!cache_dir) - return; - index = cache_dir->index; - while (index) { - next = index->next; - kobject_put(&index->kobj); - index = next; - } - kobject_put(cache_dir->kobj); - kfree(cache_dir); - cache_dir_cpu[cpu] = NULL; + return 0; } -static int cache_hotplug(struct notifier_block *nfb, unsigned long action, - void *hcpu) +int populate_cache_leaves(unsigned int cpu) { - int cpu = (long)hcpu; - int rc = 0; + unsigned int level, idx, pvt; + union cache_topology ct; + enum cache_type ctype; + struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + struct cacheinfo *this_leaf = this_cpu_ci->info_list; - switch (action & ~CPU_TASKS_FROZEN) { - case CPU_ONLINE: - rc = cache_add_cpu(cpu); - if (rc) - cache_remove_cpu(cpu); - break; - case CPU_DEAD: - cache_remove_cpu(cpu); - break; + ct.raw = ecag(EXTRACT_TOPOLOGY, 0, 0); + for (idx = 0, level = 0; level < this_cpu_ci->num_levels && + idx < this_cpu_ci->num_leaves; idx++, level++) { + if (!this_leaf) + return -EINVAL; + + pvt = (ct.ci[level].scope == CACHE_SCOPE_PRIVATE) ? 1 : 0; + ctype = get_cache_type(&ct.ci[0], level); + if (ctype == CACHE_TYPE_SEPARATE) { + ci_leaf_init(this_leaf++, pvt, CACHE_TYPE_DATA, level); + ci_leaf_init(this_leaf++, pvt, CACHE_TYPE_INST, level); + } else { + ci_leaf_init(this_leaf++, pvt, ctype, level); + } } - return rc ? NOTIFY_BAD : NOTIFY_OK; -} - -static int __init cache_init(void) -{ - int cpu; - - if (!test_facility(34)) - return 0; - cache_build_info(); - - cpu_notifier_register_begin(); - for_each_online_cpu(cpu) - cache_add_cpu(cpu); - __hotcpu_notifier(cache_hotplug, 0); - cpu_notifier_register_done(); return 0; } -device_initcall(cache_init); -- cgit v1.2.3-70-g09d2 From bae2a3cc4f5e2cd5b1902a040e6d3ff1f21f488a Mon Sep 17 00:00:00 2001 From: Thomas Huth Date: Fri, 9 Jan 2015 09:49:20 +0100 Subject: s390/docs: Break long lines in Debugging390.txt There are a lot of lines that are longer than 80 columns in this file, rendering it hard to read in a terminal window. This patch fixes most of these long lines, and while we're at it, also makes some sentences more readable, e.g. by replacing "&" with "and", adding proper punctuation, removing superfluous clauses, etc. Signed-off-by: Thomas Huth Signed-off-by: Martin Schwidefsky --- Documentation/s390/Debugging390.txt | 464 ++++++++++++++++++------------------ 1 file changed, 237 insertions(+), 227 deletions(-) diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index 08911b5c6b0e..ae75366cc3d0 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -1,14 +1,14 @@ - - Debugging on Linux for s/390 & z/Architecture - by - Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) - Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation - Best viewed with fixed width fonts + + Debugging on Linux for s/390 & z/Architecture + by + Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + Copyright (C) 2000-2001 IBM Deutschland Entwicklung GmbH, IBM Corporation + Best viewed with fixed width fonts Overview of Document: ===================== -This document is intended to give a good overview of how to debug -Linux for s/390 & z/Architecture. It isn't intended as a complete reference & not a +This document is intended to give a good overview of how to debug Linux for +s/390 and z/Architecture. It is not intended as a complete reference and not a tutorial on the fundamentals of C & assembly. It doesn't go into 390 IO in any detail. It is intended to complement the documents in the reference section below & any other worthwhile references you get. @@ -44,18 +44,20 @@ Register Set ============ The current architectures have the following registers. -16 General propose registers, 32 bit on s/390 64 bit on z/Architecture, r0-r15 or gpr0-gpr15 used for arithmetic & addressing. - -16 Control registers, 32 bit on s/390 64 bit on z/Architecture, ( cr0-cr15 kernel usage only ) used for memory management, -interrupt control,debugging control etc. - -16 Access registers ( ar0-ar15 ) 32 bit on s/390 & z/Architecture -not used by normal programs but potentially could -be used as temporary storage. Their main purpose is their 1 to 1 -association with general purpose registers and are used in -the kernel for copying data between kernel & user address spaces. -Access register 0 ( & access register 1 on z/Architecture ( needs 64 bit -pointer ) ) is currently used by the pthread library as a pointer to +16 General propose registers, 32 bit on s/390 and 64 bit on z/Architecture, +r0-r15 (or gpr0-gpr15), used for arithmetic and addressing. + +16 Control registers, 32 bit on s/390 and 64 bit on z/Architecture, cr0-cr15, +kernel usage only, used for memory management, interrupt control, debugging +control etc. + +16 Access registers (ar0-ar15), 32 bit on both s/390 and z/Architecture, +normally not used by normal programs but potentially could be used as +temporary storage. These registers have a 1:1 association with general +purpose registers and are designed to be used in the so-called access +register mode to select different address spaces. +Access register 0 (and access register 1 on z/Architecture, which needs a +64 bit pointer) is currently used by the pthread library as a pointer to the current running threads private area. 16 64 bit floating point registers (fp0-fp15 ) IEEE & HFP floating @@ -90,18 +92,19 @@ s/390 z/Architecture 6 6 Input/Output interrupt Mask -7 7 External interrupt Mask used primarily for interprocessor signalling & - clock interrupts. +7 7 External interrupt Mask used primarily for interprocessor + signalling and clock interrupts. -8-11 8-11 PSW Key used for complex memory protection mechanism not used under linux +8-11 8-11 PSW Key used for complex memory protection mechanism + (not used under linux) 12 12 1 on s/390 0 on z/Architecture 13 13 Machine Check Mask 1=enable machine check interrupts -14 14 Wait State set this to 1 to stop the processor except for interrupts & give - time to other LPARS used in CPU idle in the kernel to increase overall - usage of processor resources. +14 14 Wait State. Set this to 1 to stop the processor except for + interrupts and give time to other LPARS. Used in CPU idle in + the kernel to increase overall usage of processor resources. 15 15 Problem state ( if set to 1 certain instructions are disabled ) all linux user programs run with this bit 1 @@ -165,21 +168,23 @@ s/390 z/Architecture when loading the address with LPSWE otherwise a specification exception occurs, LPSW is fully backward compatible. - - + + Prefix Page(s) --------------- +-------------- This per cpu memory area is too intimately tied to the processor not to mention. -It exists between the real addresses 0-4096 on s/390 & 0-8192 z/Architecture & is exchanged -with a 1 page on s/390 or 2 pages on z/Architecture in absolute storage by the set -prefix instruction in linux'es startup. -This page is mapped to a different prefix for each processor in an SMP configuration -( assuming the os designer is sane of course :-) ). -Bytes 0-512 ( 200 hex ) on s/390 & 0-512,4096-4544,4604-5119 currently on z/Architecture -are used by the processor itself for holding such information as exception indications & -entry points for exceptions. -Bytes after 0xc00 hex are used by linux for per processor globals on s/390 & z/Architecture -( there is a gap on z/Architecture too currently between 0xc00 & 1000 which linux uses ). +It exists between the real addresses 0-4096 on s/390 and between 0-8192 on +z/Architecture and is exchanged with one page on s/390 or two pages on +z/Architecture in absolute storage by the set prefix instruction during Linux +startup. +This page is mapped to a different prefix for each processor in an SMP +configuration (assuming the OS designer is sane of course). +Bytes 0-512 (200 hex) on s/390 and 0-512, 4096-4544, 4604-5119 currently on +z/Architecture are used by the processor itself for holding such information +as exception indications and entry points for exceptions. +Bytes after 0xc00 hex are used by linux for per processor globals on s/390 and +z/Architecture (there is a gap on z/Architecture currently between 0xc00 and +0x1000, too, which is used by Linux). The closest thing to this on traditional architectures is the interrupt vector table. This is a good thing & does simplify some of the kernel coding however it means that we now cannot catch stray NULL pointers in the @@ -192,26 +197,26 @@ Address Spaces on Intel Linux The traditional Intel Linux is approximately mapped as follows forgive the ascii art. -0xFFFFFFFF 4GB Himem ***************** - * * - * Kernel Space * - * * - ***************** **************** -User Space Himem (typically 0xC0000000 3GB )* User Stack * * * - ***************** * * - * Shared Libs * * Next Process * - ***************** * to * - * * <== * Run * <== - * User Program * * * - * Data BSS * * * - * Text * * * - * Sections * * * -0x00000000 ***************** **************** - -Now it is easy to see that on Intel it is quite easy to recognise a kernel address -as being one greater than user space himem ( in this case 0xC0000000). -& addresses of less than this are the ones in the current running program on this -processor ( if an smp box ). +0xFFFFFFFF 4GB Himem ***************** + * * + * Kernel Space * + * * + ***************** **************** +User Space Himem * User Stack * * * +(typically 0xC0000000 3GB ) ***************** * * + * Shared Libs * * Next Process * + ***************** * to * + * * <== * Run * <== + * User Program * * * + * Data BSS * * * + * Text * * * + * Sections * * * +0x00000000 ***************** **************** + +Now it is easy to see that on Intel it is quite easy to recognise a kernel +address as being one greater than user space himem (in this case 0xC0000000), +and addresses of less than this are the ones in the current running program on +this processor (if an smp box). If using the virtual machine ( VM ) as a debugger it is quite difficult to know which user process is running as the address space you are looking at could be from any process in the run queue. @@ -247,8 +252,8 @@ Our addressing scheme is basically as follows: Himem 0x7fffffff 2GB on s/390 ***************** **************** currently 0x3ffffffffff (2^42)-1 * User Stack * * * on z/Architecture. ***************** * * - * Shared Libs * * * - ***************** * * + * Shared Libs * * * + ***************** * * * * * Kernel * * User Program * * * * Data BSS * * * @@ -301,10 +306,10 @@ Virtual Addresses on s/390 & z/Architecture =========================================== A virtual address on s/390 is made up of 3 parts -The SX ( segment index, roughly corresponding to the PGD & PMD in linux terminology ) -being bits 1-11. -The PX ( page index, corresponding to the page table entry (pte) in linux terminology ) -being bits 12-19. +The SX (segment index, roughly corresponding to the PGD & PMD in Linux +terminology) being bits 1-11. +The PX (page index, corresponding to the page table entry (pte) in Linux +terminology) being bits 12-19. The remaining bits BX (the byte index are the offset in the page ) i.e. bits 20 to 31. @@ -368,9 +373,9 @@ each processor as follows. * ( 8K ) * 16K aligned ************************ -What this means is that we don't need to dedicate any register or global variable -to point to the current running process & can retrieve it with the following -very simple construct for s/390 & one very similar for z/Architecture. +What this means is that we don't need to dedicate any register or global +variable to point to the current running process & can retrieve it with the +following very simple construct for s/390 & one very similar for z/Architecture. static inline struct task_struct * get_current(void) { @@ -403,8 +408,8 @@ Note: To follow stackframes requires a knowledge of C or Pascal & limited knowledge of one assembly language. It should be noted that there are some differences between the -s/390 & z/Architecture stack layouts as the z/Architecture stack layout didn't have -to maintain compatibility with older linkage formats. +s/390 and z/Architecture stack layouts as the z/Architecture stack layout +didn't have to maintain compatibility with older linkage formats. Glossary: --------- @@ -440,7 +445,7 @@ The code generated by the compiler to return to the caller. frameless-function A frameless function in Linux for s390 & z/Architecture is one which doesn't -need more than the register save area ( 96 bytes on s/390, 160 on z/Architecture ) +need more than the register save area (96 bytes on s/390, 160 on z/Architecture) given to it by the caller. A frameless function never: 1) Sets up a back chain. @@ -588,8 +593,8 @@ A sample program with comments. Comments on the function test ----------------------------- -1) It didn't need to set up a pointer to the constant pool gpr13 as it isn't used -( :-( ). +1) It didn't need to set up a pointer to the constant pool gpr13 as it is not +used ( :-( ). 2) This is a frameless function & no stack is bought. 3) The compiler was clever enough to recognise that it could return the value in r2 as well as use it for the passed in parameter ( :-) ). @@ -743,35 +748,34 @@ Debugging under VM Notes ----- Addresses & values in the VM debugger are always hex never decimal -Address ranges are of the format - or . -e.g. The address range 0x2000 to 0x3000 can be described as 2000-3000 or 2000.1000 +Address ranges are of the format - or +. +For example, the address range 0x2000 to 0x3000 can be described as 2000-3000 +or 2000.1000 The VM Debugger is case insensitive. -VM's strengths are usually other debuggers weaknesses you can get at any resource -no matter how sensitive e.g. memory management resources,change address translation -in the PSW. For kernel hacking you will reap dividends if you get good at it. - -The VM Debugger displays operators but not operands, probably because some -of it was written when memory was expensive & the programmer was probably proud that -it fitted into 2k of memory & the programmers & didn't want to shock hardcore VM'ers by -changing the interface :-), also the debugger displays useful information on the same line & -the author of the code probably felt that it was a good idea not to go over -the 80 columns on the screen. - -As some of you are probably in a panic now this isn't as unintuitive as it may seem -as the 390 instructions are easy to decode mentally & you can make a good guess at a lot -of them as all the operands are nibble ( half byte aligned ) & if you have an objdump listing -also it is quite easy to follow, if you don't have an objdump listing keep a copy of -the s/390 Reference Summary & look at between pages 2 & 7 or alternatively the -s/390 principles of operation. +VM's strengths are usually other debuggers weaknesses you can get at any +resource no matter how sensitive e.g. memory management resources, change +address translation in the PSW. For kernel hacking you will reap dividends if +you get good at it. + +The VM Debugger displays operators but not operands, and also the debugger +displays useful information on the same line as the author of the code probably +felt that it was a good idea not to go over the 80 columns on the screen. +This isn't as unintuitive as it may seem as the s/390 instructions are easy to +decode mentally and you can make a good guess at a lot of them as all the +operands are nibble (half byte aligned). +So if you have an objdump listing by hand, it is quite easy to follow, and if +you don't have an objdump listing keep a copy of the s/390 Reference Summary +or alternatively the s/390 principles of operation next to you. e.g. even I can guess that 0001AFF8' LR 180F CC 0 is a ( load register ) lr r0,r15 -Also it is very easy to tell the length of a 390 instruction from the 2 most significant -bits in the instruction ( not that this info is really useful except if you are trying to -make sense of a hexdump of code ). +Also it is very easy to tell the length of a 390 instruction from the 2 most +significant bits in the instruction (not that this info is really useful except +if you are trying to make sense of a hexdump of code). Here is a table Bits Instruction Length ------------------------------------------ @@ -780,9 +784,6 @@ Bits Instruction Length 10 4 Bytes 11 6 Bytes - - - The debugger also displays other useful info on the same line such as the addresses being operated on destination addresses of branches & condition codes. e.g. @@ -853,8 +854,8 @@ Displaying & modifying Registers -------------------------------- D G will display all the gprs Adding a extra G to all the commands is necessary to access the full 64 bit -content in VM on z/Architecture obviously this isn't required for access registers -as these are still 32 bit. +content in VM on z/Architecture. Obviously this isn't required for access +registers as these are still 32 bit. e.g. DGG instead of DG D X will display all the control registers D AR will display all the access registers @@ -870,10 +871,11 @@ Displaying Memory ----------------- To display memory mapped using the current PSW's mapping try D -To make VM display a message each time it hits a particular address & continue try +To make VM display a message each time it hits a particular address and +continue try D I will disassemble/display a range of instructions. ST addr 32 bit word will store a 32 bit aligned address -D T will display the EBCDIC in an address ( if you are that way inclined ) +D T will display the EBCDIC in an address (if you are that way inclined) D R will display real addresses ( without DAT ) but with prefixing. There are other complex options to display if you need to get at say home space but are in primary space the easiest thing to do is to temporarily @@ -884,8 +886,8 @@ restore it. Hints ----- -If you want to issue a debugger command without halting your virtual machine with the -PA1 key try prefixing the command with #CP e.g. +If you want to issue a debugger command without halting your virtual machine +with the PA1 key try prefixing the command with #CP e.g. #cp tr i pswa 2000 also suffixing most debugger commands with RUN will cause them not to stop just display the mnemonic at the current instruction on the console. @@ -903,9 +905,10 @@ This sends a message to your own console each time do_signal is entered. script with breakpoints on every kernel procedure, this isn't a good idea because there are thousands of these routines & VM can only set 255 breakpoints at a time so you nearly had to spend as long pruning the file down as you would -entering the msg's by hand ),however, the trick might be useful for a single object file. -On linux'es 3270 emulator x3270 there is a very useful option under the file ment -Save Screens In File this is very good of keeping a copy of traces. +entering the msgs by hand), however, the trick might be useful for a single +object file. In the 3270 terminal emulator x3270 there is a very useful option +in the file menu called "Save Screen In File" - this is very good for keeping a +copy of traces. From CMS help will give you online help on a particular command. e.g. @@ -920,7 +923,8 @@ SET PF9 IMM B This does a single step in VM on pressing F8. SET PF10 ^ This sets up the ^ key. -which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly into some 3270 consoles. +which can be used for ^c (ctrl-c),^z (ctrl-z) which can't be typed directly +into some 3270 consoles. SET PF11 ^- This types the starting keystrokes for a sysrq see SysRq below. SET PF12 RETRIEVE @@ -1014,8 +1018,8 @@ Tracing Program Exceptions -------------------------- If you get a crash which says something like illegal operation or specification exception followed by a register dump -You can restart linux & trace these using the tr prog trace option. - +You can restart linux & trace these using the tr prog trace +option. The most common ones you will normally be tracing for is @@ -1057,9 +1061,10 @@ TR GOTO INITIAL Tracing linux syscalls under VM ------------------------------- -Syscalls are implemented on Linux for S390 by the Supervisor call instruction (SVC) there 256 -possibilities of these as the instruction is made up of a 0xA opcode & the second byte being -the syscall number. They are traced using the simple command. +Syscalls are implemented on Linux for S390 by the Supervisor call instruction +(SVC). There 256 possibilities of these as the instruction is made up of a 0xA +opcode and the second byte being the syscall number. They are traced using the +simple command: TR SVC the syscalls are defined in linux/arch/s390/include/asm/unistd.h e.g. to trace all file opens just do @@ -1070,12 +1075,12 @@ SMP Specific commands --------------------- To find out how many cpus you have Q CPUS displays all the CPU's available to your virtual machine -To find the cpu that the current cpu VM debugger commands are being directed at do -Q CPU to change the current cpu VM debugger commands are being directed at do +To find the cpu that the current cpu VM debugger commands are being directed at +do Q CPU to change the current cpu VM debugger commands are being directed at do CPU -On a SMP guest issue a command to all CPUs try prefixing the command with cpu all. -To issue a command to a particular cpu try cpu e.g. +On a SMP guest issue a command to all CPUs try prefixing the command with cpu +all. To issue a command to a particular cpu try cpu e.g. CPU 01 TR I R 2000.3000 If you are running on a guest with several cpus & you have a IO related problem & cannot follow the flow of code but you know it isn't smp related. @@ -1101,10 +1106,10 @@ D TX0.100 Alternatively ============= -Under older VM debuggers ( I love EBDIC too ) you can use this little program I wrote which -will convert a command line of hex digits to ascii text which can be compiled under linux & -you can copy the hex digits from your x3270 terminal to your xterm if you are debugging -from a linuxbox. +Under older VM debuggers (I love EBDIC too) you can use following little +program which converts a command line of hex digits to ascii text. It can be +compiled under linux and you can copy the hex digits from your x3270 terminal +to your xterm if you are debugging from a linuxbox. This is quite useful when looking at a parameter passed in as a text string under VM ( unless you are good at decoding ASCII in your head ). @@ -1114,14 +1119,14 @@ TR SVC 5 We have stopped at a breakpoint 000151B0' SVC 0A05 -> 0001909A' CC 0 -D 20.8 to check the SVC old psw in the prefix area & see was it from userspace -( for the layout of the prefix area consult P18 of the s/390 390 Reference Summary -if you have it available ). +D 20.8 to check the SVC old psw in the prefix area and see was it from userspace +(for the layout of the prefix area consult the "Fixed Storage Locations" +chapter of the s/390 Reference Summary if you have it available). V00000020 070C2000 800151B2 The problem state bit wasn't set & it's also too early in the boot sequence for it to be a userspace SVC if it was we would have to temporarily switch the -psw to user space addressing so we could get at the first parameter of the open in -gpr2. +psw to user space addressing so we could get at the first parameter of the open +in gpr2. Next do a D G2 GPR 2 = 00014CB4 @@ -1208,9 +1213,9 @@ Here are the tricks I use 9 out of 10 times it works pretty well, When your backchain reaches a dead end -------------------------------------- -This can happen when an exception happens in the kernel & the kernel is entered twice -if you reach the NULL pointer at the end of the back chain you should be -able to sniff further back if you follow the following tricks. +This can happen when an exception happens in the kernel and the kernel is +entered twice. If you reach the NULL pointer at the end of the back chain you +should be able to sniff further back if you follow the following tricks. 1) A kernel address should be easy to recognise since it is in primary space & the problem state bit isn't set & also The Hi bit of the address is set. @@ -1260,8 +1265,8 @@ V000FFFD0 00010400 80010802 8001085A 000FFFA0 our 3rd return address is 8001085A -as the 04B52002 looks suspiciously like rubbish it is fair to assume that the kernel entry routines -for the sake of optimisation don't set up a backchain. +as the 04B52002 looks suspiciously like rubbish it is fair to assume that the +kernel entry routines for the sake of optimisation don't set up a backchain. now look at System.map to see if the addresses make any sense. @@ -1289,67 +1294,75 @@ Congrats you've done your first backchain. s/390 & z/Architecture IO Overview ================================== -I am not going to give a course in 390 IO architecture as this would take me quite a -while & I'm no expert. Instead I'll give a 390 IO architecture summary for Dummies if you have -the s/390 principles of operation available read this instead. If nothing else you may find a few -useful keywords in here & be able to use them on a web search engine like altavista to find -more useful information. +I am not going to give a course in 390 IO architecture as this would take me +quite a while and I'm no expert. Instead I'll give a 390 IO architecture +summary for Dummies. If you have the s/390 principles of operation available +read this instead. If nothing else you may find a few useful keywords in here +and be able to use them on a web search engine to find more useful information. Unlike other bus architectures modern 390 systems do their IO using mostly -fibre optics & devices such as tapes & disks can be shared between several mainframes, -also S390 can support up to 65536 devices while a high end PC based system might be choking -with around 64. Here is some of the common IO terminology +fibre optics and devices such as tapes and disks can be shared between several +mainframes. Also S390 can support up to 65536 devices while a high end PC based +system might be choking with around 64. -Subchannel: -This is the logical number most IO commands use to talk to an IO device there can be up to -0x10000 (65536) of these in a configuration typically there is a few hundred. Under VM -for simplicity they are allocated contiguously, however on the native hardware they are not -they typically stay consistent between boots provided no new hardware is inserted or removed. -Under Linux for 390 we use these as IRQ's & also when issuing an IO command (CLEAR SUBCHANNEL, -HALT SUBCHANNEL,MODIFY SUBCHANNEL,RESUME SUBCHANNEL,START SUBCHANNEL,STORE SUBCHANNEL & -TEST SUBCHANNEL ) we use this as the ID of the device we wish to talk to, the most -important of these instructions are START SUBCHANNEL ( to start IO ), TEST SUBCHANNEL ( to check -whether the IO completed successfully ), & HALT SUBCHANNEL ( to kill IO ), a subchannel -can have up to 8 channel paths to a device this offers redundancy if one is not available. +Here is some of the common IO terminology: +Subchannel: +This is the logical number most IO commands use to talk to an IO device. There +can be up to 0x10000 (65536) of these in a configuration, typically there are a +few hundred. Under VM for simplicity they are allocated contiguously, however +on the native hardware they are not. They typically stay consistent between +boots provided no new hardware is inserted or removed. +Under Linux for s390 we use these as IRQ's and also when issuing an IO command +(CLEAR SUBCHANNEL, HALT SUBCHANNEL, MODIFY SUBCHANNEL, RESUME SUBCHANNEL, +START SUBCHANNEL, STORE SUBCHANNEL and TEST SUBCHANNEL). We use this as the ID +of the device we wish to talk to. The most important of these instructions are +START SUBCHANNEL (to start IO), TEST SUBCHANNEL (to check whether the IO +completed successfully) and HALT SUBCHANNEL (to kill IO). A subchannel can have +up to 8 channel paths to a device, this offers redundancy if one is not +available. Device Number: -This number remains static & Is closely tied to the hardware, there are 65536 of these -also they are made up of a CHPID ( Channel Path ID, the most significant 8 bits ) -& another lsb 8 bits. These remain static even if more devices are inserted or removed -from the hardware, there is a 1 to 1 mapping between Subchannels & Device Numbers provided -devices aren't inserted or removed. +This number remains static and is closely tied to the hardware. There are 65536 +of these, made up of a CHPID (Channel Path ID, the most significant 8 bits) and +another lsb 8 bits. These remain static even if more devices are inserted or +removed from the hardware. There is a 1 to 1 mapping between subchannels and +device numbers, provided devices aren't inserted or removed. Channel Control Words: -CCWS are linked lists of instructions initially pointed to by an operation request block (ORB), -which is initially given to Start Subchannel (SSCH) command along with the subchannel number -for the IO subsystem to process while the CPU continues executing normal code. -These come in two flavours, Format 0 ( 24 bit for backward ) -compatibility & Format 1 ( 31 bit ). These are typically used to issue read & write -( & many other instructions ) they consist of a length field & an absolute address field. -For each IO typically get 1 or 2 interrupts one for channel end ( primary status ) when the -channel is idle & the second for device end ( secondary status ) sometimes you get both -concurrently, you check how the IO went on by issuing a TEST SUBCHANNEL at each interrupt, -from which you receive an Interruption response block (IRB). If you get channel & device end -status in the IRB without channel checks etc. your IO probably went okay. If you didn't you -probably need a doctor to examine the IRB & extended status word etc. +CCWs are linked lists of instructions initially pointed to by an operation +request block (ORB), which is initially given to Start Subchannel (SSCH) +command along with the subchannel number for the IO subsystem to process +while the CPU continues executing normal code. +CCWs come in two flavours, Format 0 (24 bit for backward compatibility) and +Format 1 (31 bit). These are typically used to issue read and write (and many +other) instructions. They consist of a length field and an absolute address +field. +Each IO typically gets 1 or 2 interrupts, one for channel end (primary status) +when the channel is idle, and the second for device end (secondary status). +Sometimes you get both concurrently. You check how the IO went on by issuing a +TEST SUBCHANNEL at each interrupt, from which you receive an Interruption +response block (IRB). If you get channel and device end status in the IRB +without channel checks etc. your IO probably went okay. If you didn't you +probably need to examine the IRB, extended status word etc. If an error occurs, more sophisticated control units have a facility known as -concurrent sense this means that if an error occurs Extended sense information will -be presented in the Extended status word in the IRB if not you have to issue a -subsequent SENSE CCW command after the test subchannel. +concurrent sense. This means that if an error occurs Extended sense information +will be presented in the Extended status word in the IRB. If not you have to +issue a subsequent SENSE CCW command after the test subchannel. -TPI( Test pending interrupt) can also be used for polled IO but in multitasking multiprocessor -systems it isn't recommended except for checking special cases ( i.e. non looping checks for -pending IO etc. ). +TPI (Test pending interrupt) can also be used for polled IO, but in +multitasking multiprocessor systems it isn't recommended except for +checking special cases (i.e. non looping checks for pending IO etc.). -Store Subchannel & Modify Subchannel can be used to examine & modify operating characteristics -of a subchannel ( e.g. channel paths ). +Store Subchannel and Modify Subchannel can be used to examine and modify +operating characteristics of a subchannel (e.g. channel paths). Other IO related Terms: Sysplex: S390's Clustering Technology -QDIO: S390's new high speed IO architecture to support devices such as gigabit ethernet, -this architecture is also designed to be forward compatible with up & coming 64 bit machines. +QDIO: S390's new high speed IO architecture to support devices such as gigabit +ethernet, this architecture is also designed to be forward compatible with +upcoming 64 bit machines. General Concepts @@ -1406,37 +1419,40 @@ sometimes called Bus-and Tag & sometimes Original Equipment Manufacturers Interface (OEMI). This byte wide Parallel channel path/bus has parity & data on the "Bus" cable -& control lines on the "Tag" cable. These can operate in byte multiplex mode for -sharing between several slow devices or burst mode & monopolize the channel for the -whole burst. Up to 256 devices can be addressed on one of these cables. These cables are -about one inch in diameter. The maximum unextended length supported by these cables is -125 Meters but this can be extended up to 2km with a fibre optic channel extended -such as a 3044. The maximum burst speed supported is 4.5 megabytes per second however -some really old processors support only transfer rates of 3.0, 2.0 & 1.0 MB/sec. +and control lines on the "Tag" cable. These can operate in byte multiplex mode +for sharing between several slow devices or burst mode and monopolize the +channel for the whole burst. Up to 256 devices can be addressed on one of these +cables. These cables are about one inch in diameter. The maximum unextended +length supported by these cables is 125 Meters but this can be extended up to +2km with a fibre optic channel extended such as a 3044. The maximum burst speed +supported is 4.5 megabytes per second. However, some really old processors +support only transfer rates of 3.0, 2.0 & 1.0 MB/sec. One of these paths can be daisy chained to up to 8 control units. ESCON if fibre optic it is also called FICON -Was introduced by IBM in 1990. Has 2 fibre optic cables & uses either leds or lasers -for communication at a signaling rate of up to 200 megabits/sec. As 10bits are transferred -for every 8 bits info this drops to 160 megabits/sec & to 18.6 Megabytes/sec once -control info & CRC are added. ESCON only operates in burst mode. +Was introduced by IBM in 1990. Has 2 fibre optic cables and uses either leds or +lasers for communication at a signaling rate of up to 200 megabits/sec. As +10bits are transferred for every 8 bits info this drops to 160 megabits/sec +and to 18.6 Megabytes/sec once control info and CRC are added. ESCON only +operates in burst mode. -ESCONs typical max cable length is 3km for the led version & 20km for the laser version -known as XDF ( extended distance facility ). This can be further extended by using an -ESCON director which triples the above mentioned ranges. Unlike Bus & Tag as ESCON is -serial it uses a packet switching architecture the standard Bus & Tag control protocol -is however present within the packets. Up to 256 devices can be attached to each control -unit that uses one of these interfaces. +ESCONs typical max cable length is 3km for the led version and 20km for the +laser version known as XDF (extended distance facility). This can be further +extended by using an ESCON director which triples the above mentioned ranges. +Unlike Bus & Tag as ESCON is serial it uses a packet switching architecture, +the standard Bus & Tag control protocol is however present within the packets. +Up to 256 devices can be attached to each control unit that uses one of these +interfaces. Common 390 Devices include: Network adapters typically OSA2,3172's,2116's & OSA-E gigabit ethernet adapters, -Consoles 3270 & 3215 ( a teletype emulated under linux for a line mode console ). +Consoles 3270 & 3215 (a teletype emulated under linux for a line mode console). DASD's direct access storage devices ( otherwise known as hard disks ). Tape Drives. CTC ( Channel to Channel Adapters ), ESCON or Parallel Cables used as a very high speed serial link -between 2 machines. We use 2 cables under linux to do a bi-directional serial link. +between 2 machines. Debugging IO on s/390 & z/Architecture under VM @@ -1475,9 +1491,9 @@ or the halt subchannels or TR HSCH 7C08-7C09 MSCH's ,STSCH's I think you can guess the rest -Ingo's favourite trick is tracing all the IO's & CCWS & spooling them into the reader of another -VM guest so he can ftp the logfile back to his own machine.I'll do a small bit of this & give you - a look at the output. +A good trick is tracing all the IO's and CCWS and spooling them into the reader +of another VM guest so he can ftp the logfile back to his own machine. I'll do +a small bit of this and give you a look at the output. 1) Spool stdout to VM reader SP PRT TO (another vm guest ) or * for the local vm guest @@ -1593,8 +1609,8 @@ undisplay : undo's display's info breakpoints: shows all current breakpoints -info stack: shows stack back trace ( if this doesn't work too well, I'll show you the -stacktrace by hand below ). +info stack: shows stack back trace (if this doesn't work too well, I'll show +you the stacktrace by hand below). info locals: displays local variables. @@ -1619,7 +1635,8 @@ next: like step except this will not step into subroutines stepi: steps a single machine code instruction. e.g. stepi 100 -nexti: steps a single machine code instruction but will not step into subroutines. +nexti: steps a single machine code instruction but will not step into +subroutines. finish: will run until exit of the current routine @@ -1721,7 +1738,8 @@ e.g. outputs: $1 = 11 -You might now be thinking that the line above didn't work, something extra had to be done. +You might now be thinking that the line above didn't work, something extra had +to be done. (gdb) call fflush(stdout) hello world$2 = 0 As an aside the debugger also calls malloc & free under the hood @@ -1804,26 +1822,17 @@ man gdb or info gdb. core dumps ---------- What a core dump ?, -A core dump is a file generated by the kernel ( if allowed ) which contains the registers, -& all active pages of the program which has crashed. -From this file gdb will allow you to look at the registers & stack trace & memory of the -program as if it just crashed on your system, it is usually called core & created in the -current working directory. -This is very useful in that a customer can mail a core dump to a technical support department -& the technical support department can reconstruct what happened. -Provided they have an identical copy of this program with debugging symbols compiled in & -the source base of this build is available. -In short it is far more useful than something like a crash log could ever hope to be. - -In theory all that is missing to restart a core dumped program is a kernel patch which -will do the following. -1) Make a new kernel task structure -2) Reload all the dumped pages back into the kernel's memory management structures. -3) Do the required clock fixups -4) Get all files & network connections for the process back into an identical state ( really difficult ). -5) A few more difficult things I haven't thought of. - - +A core dump is a file generated by the kernel (if allowed) which contains the +registers and all active pages of the program which has crashed. +From this file gdb will allow you to look at the registers, stack trace and +memory of the program as if it just crashed on your system. It is usually +called core and created in the current working directory. +This is very useful in that a customer can mail a core dump to a technical +support department and the technical support department can reconstruct what +happened. Provided they have an identical copy of this program with debugging +symbols compiled in and the source base of this build is available. +In short it is far more useful than something like a crash log could ever hope +to be. Why have I never seen one ?. Probably because you haven't used the command @@ -1868,7 +1877,7 @@ Breakpoint 2 at 0x4d87a4: file top.c, line 2609. #3 0x5167e6 in readline_internal_char () at readline.c:454 #4 0x5168ee in readline_internal_charloop () at readline.c:507 #5 0x51692c in readline_internal () at readline.c:521 -#6 0x5164fe in readline (prompt=0x7ffff810 "\177ÿøx\177ÿ÷Ø\177ÿøxÀ") +#6 0x5164fe in readline (prompt=0x7ffff810) at readline.c:349 #7 0x4d7a8a in command_line_input (prompt=0x564420 "(gdb) ", repeat=1, annotation_suffix=0x4d6b44 "prompt") at top.c:2091 @@ -1929,8 +1938,8 @@ cat /proc/sys/net/ipv4/ip_forward On my machine now outputs 1 IP forwarding is on. -There is a lot of useful info in here best found by going in & having a look around, -so I'll take you through some entries I consider important. +There is a lot of useful info in here best found by going in and having a look +around, so I'll take you through some entries I consider important. All the processes running on the machine have their own entry defined by /proc/ @@ -2060,7 +2069,8 @@ if the device doesn't say up try /etc/rc.d/init.d/network start ( this starts the network stack & hopefully calls ifconfig tr0 up ). -ifconfig looks at the output of /proc/net/dev & presents it in a more presentable form +ifconfig looks at the output of /proc/net/dev and presents it in a more +presentable form. Now ping the device from a machine in the same subnet. if the RX packets count & TX packets counts don't increment you probably have problems. -- cgit v1.2.3-70-g09d2 From fcb6bc9e9e3cc0b0027ab91ed4a2e6b05f518049 Mon Sep 17 00:00:00 2001 From: Thomas Huth Date: Fri, 9 Jan 2015 09:51:00 +0100 Subject: s390/docs: Remove section about script debugging from Debugging390.txt The section about debugging scripting languages has nothing to do with s390 (and the example is even apparently taken from a i586 host instead), so let's remove this chapter from the file. Signed-off-by: Thomas Huth Signed-off-by: Martin Schwidefsky --- Documentation/s390/Debugging390.txt | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/Documentation/s390/Debugging390.txt b/Documentation/s390/Debugging390.txt index ae75366cc3d0..3df8babcdc41 100644 --- a/Documentation/s390/Debugging390.txt +++ b/Documentation/s390/Debugging390.txt @@ -35,7 +35,6 @@ Examining core dumps ldd Debugging modules The proc file system -Starting points for debugging scripting languages etc. SysRq References Special Thanks @@ -2096,34 +2095,6 @@ of the device. See the manpage chandev.8 &type cat /proc/chandev for more info. - -Starting points for debugging scripting languages etc. -====================================================== - -bash/sh - -bash -x -e.g. bash -x /usr/bin/bashbug -displays the following lines as it executes them. -+ MACHINE=i586 -+ OS=linux-gnu -+ CC=gcc -+ CFLAGS= -DPROGRAM='bash' -DHOSTTYPE='i586' -DOSTYPE='linux-gnu' -DMACHTYPE='i586-pc-linux-gnu' -DSHELL -DHAVE_CONFIG_H -I. -I. -I./lib -O2 -pipe -+ RELEASE=2.01 -+ PATCHLEVEL=1 -+ RELSTATUS=release -+ MACHTYPE=i586-pc-linux-gnu - -perl -d runs the perlscript in a fully interactive debugger -. -Type 'h' in the debugger for help. - -for debugging java type -jdb another fully interactive gdb style debugger. -& type ? in the debugger for help. - - - SysRq ===== This is now supported by linux for s/390 & z/Architecture. -- cgit v1.2.3-70-g09d2 From e982506730815f9e3bcd148d06b5b6d778d9c46c Mon Sep 17 00:00:00 2001 From: Syam Sidhardhan Date: Tue, 30 Dec 2014 16:47:01 +0530 Subject: s390/hmcdrv: remove unnecessary version.h inclusion version.h inclusion is not necessary as detected by versioncheck. Signed-off-by: Syam Sidhardhan Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/hmcdrv_mod.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/s390/char/hmcdrv_mod.c b/drivers/s390/char/hmcdrv_mod.c index 505c6a78ee1a..251a318a9b75 100644 --- a/drivers/s390/char/hmcdrv_mod.c +++ b/drivers/s390/char/hmcdrv_mod.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include "hmcdrv_ftp.h" -- cgit v1.2.3-70-g09d2 From f8b2dcbd9e6d1479b9b5a9e9e78bbaf783bde819 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 14 Jan 2015 17:50:19 +0100 Subject: s390: add z13 code generation support Allow to generate code that only runs on z13 machines. Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 18 ++++++++++++++++++ arch/s390/Makefile | 2 ++ arch/s390/kernel/head.S | 4 +++- arch/s390/kernel/setup.c | 3 +++ 4 files changed, 26 insertions(+), 1 deletion(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index e79c3eab40b9..06c6d9ab5a8d 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -185,6 +185,10 @@ config HAVE_MARCH_ZEC12_FEATURES def_bool n select HAVE_MARCH_Z196_FEATURES +config HAVE_MARCH_Z13_FEATURES + def_bool n + select HAVE_MARCH_ZEC12_FEATURES + choice prompt "Processor type" default MARCH_G5 @@ -244,6 +248,14 @@ config MARCH_ZEC12 2827 series). The kernel will be slightly faster but will not work on older machines. +config MARCH_Z13 + bool "IBM z13" + select HAVE_MARCH_Z13_FEATURES if 64BIT + help + Select this to enable optimizations for IBM z13 (2964 series). + The kernel will be slightly faster but will not work on older + machines. + endchoice config MARCH_G5_TUNE @@ -267,6 +279,9 @@ config MARCH_Z196_TUNE config MARCH_ZEC12_TUNE def_bool TUNE_ZEC12 || MARCH_ZEC12 && TUNE_DEFAULT +config MARCH_Z13_TUNE + def_bool TUNE_Z13 || MARCH_Z13 && TUNE_DEFAULT + choice prompt "Tune code generation" default TUNE_DEFAULT @@ -305,6 +320,9 @@ config TUNE_Z196 config TUNE_ZEC12 bool "IBM zBC12 and zEC12" +config TUNE_Z13 + bool "IBM z13" + endchoice config 64BIT diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 878e67973151..e742ec5de9a7 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -42,6 +42,7 @@ mflags-$(CONFIG_MARCH_Z9_109) := -march=z9-109 mflags-$(CONFIG_MARCH_Z10) := -march=z10 mflags-$(CONFIG_MARCH_Z196) := -march=z196 mflags-$(CONFIG_MARCH_ZEC12) := -march=zEC12 +mflags-$(CONFIG_MARCH_Z13) := -march=z13 aflags-y += $(mflags-y) cflags-y += $(mflags-y) @@ -53,6 +54,7 @@ cflags-$(CONFIG_MARCH_Z9_109_TUNE) += -mtune=z9-109 cflags-$(CONFIG_MARCH_Z10_TUNE) += -mtune=z10 cflags-$(CONFIG_MARCH_Z196_TUNE) += -mtune=z196 cflags-$(CONFIG_MARCH_ZEC12_TUNE) += -mtune=zEC12 +cflags-$(CONFIG_MARCH_Z13_TUNE) += -mtune=z13 #KBUILD_IMAGE is necessary for make rpm KBUILD_IMAGE :=arch/s390/boot/image diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index d62eee11f0b5..132f4c9ade60 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -436,7 +436,9 @@ ENTRY(startup_kdump) # followed by the facility words. #if defined(CONFIG_64BIT) -#if defined(CONFIG_MARCH_ZEC12) +#if defined(CONFIG_MARCH_Z13) + .long 3, 0xc100eff2, 0xf46ce800, 0x00400000 +#elif defined(CONFIG_MARCH_ZEC12) .long 3, 0xc100eff2, 0xf46ce800, 0x00400000 #elif defined(CONFIG_MARCH_Z196) .long 2, 0xc100eff2, 0xf46c0000 diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 4e532c67832f..bfac77ada4f2 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -810,6 +810,9 @@ static void __init setup_hwcaps(void) case 0x2828: strcpy(elf_platform, "zEC12"); break; + case 0x2964: + strcpy(elf_platform, "z13"); + break; } } -- cgit v1.2.3-70-g09d2 From 1f6b83e5e4d3aed46eac1d219322fba9c7341cd8 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 14 Jan 2015 17:51:17 +0100 Subject: s390: avoid z13 cache aliasing Avoid cache aliasing on z13 by aligning shared objects to multiples of 512K. The virtual addresses of a page from a shared file needs to have identical bits in the range 2^12 to 2^18. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/elf.h | 8 ++- arch/s390/include/asm/pgtable.h | 4 ++ arch/s390/kernel/process.c | 10 --- arch/s390/mm/init.c | 9 ++- arch/s390/mm/mmap.c | 142 +++++++++++++++++++++++++++++++++++++++- 5 files changed, 155 insertions(+), 18 deletions(-) diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index f6e43d39e3d8..c9df40b5c0ac 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -163,8 +163,8 @@ extern unsigned int vdso_enabled; the loader. We need to make sure that it is out of the way of the program that it will "exec", and that there is sufficient room for the brk. */ -extern unsigned long randomize_et_dyn(unsigned long base); -#define ELF_ET_DYN_BASE (randomize_et_dyn(STACK_TOP / 3 * 2)) +extern unsigned long randomize_et_dyn(void); +#define ELF_ET_DYN_BASE randomize_et_dyn() /* This yields a mask that user programs can use to figure out what instruction set this CPU supports. */ @@ -209,7 +209,9 @@ do { \ } while (0) #endif /* CONFIG_COMPAT */ -#define STACK_RND_MASK 0x7ffUL +extern unsigned long mmap_rnd_mask; + +#define STACK_RND_MASK (mmap_rnd_mask) #define ARCH_DLINFO \ do { \ diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 5e102422c9ab..b8641b41e19c 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -1779,6 +1779,10 @@ extern int s390_enable_sie(void); extern int s390_enable_skey(void); extern void s390_reset_cmma(struct mm_struct *mm); +/* s390 has a private copy of get unmapped area to deal with cache synonyms */ +#define HAVE_ARCH_UNMAPPED_AREA +#define HAVE_ARCH_UNMAPPED_AREA_TOPDOWN + /* * No page table caches to initialise */ diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index aa7a83948c7b..2c1eb4f3aaf5 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -243,13 +243,3 @@ unsigned long arch_randomize_brk(struct mm_struct *mm) ret = PAGE_ALIGN(mm->brk + brk_rnd()); return (ret > mm->brk) ? ret : mm->brk; } - -unsigned long randomize_et_dyn(unsigned long base) -{ - unsigned long ret; - - if (!(current->flags & PF_RANDOMIZE)) - return base; - ret = PAGE_ALIGN(base + brk_rnd()); - return (ret > base) ? ret : base; -} diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index c7235e01fd67..d35b15113b17 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -71,13 +71,16 @@ static void __init setup_zero_pages(void) break; case 0x2827: /* zEC12 */ case 0x2828: /* zEC12 */ - default: order = 5; break; + case 0x2964: /* z13 */ + default: + order = 7; + break; } /* Limit number of empty zero pages for small memory sizes */ - if (order > 2 && totalram_pages <= 16384) - order = 2; + while (order > 2 && (totalram_pages >> 10) < (1UL << order)) + order--; empty_zero_page = __get_free_pages(GFP_KERNEL | __GFP_ZERO, order); if (!empty_zero_page) diff --git a/arch/s390/mm/mmap.c b/arch/s390/mm/mmap.c index 9b436c21195e..d008f638b2cd 100644 --- a/arch/s390/mm/mmap.c +++ b/arch/s390/mm/mmap.c @@ -28,8 +28,12 @@ #include #include #include +#include #include +unsigned long mmap_rnd_mask; +unsigned long mmap_align_mask; + static unsigned long stack_maxrandom_size(void) { if (!(current->flags & PF_RANDOMIZE)) @@ -60,8 +64,10 @@ static unsigned long mmap_rnd(void) { if (!(current->flags & PF_RANDOMIZE)) return 0; - /* 8MB randomization for mmap_base */ - return (get_random_int() & 0x7ffUL) << PAGE_SHIFT; + if (is_32bit_task()) + return (get_random_int() & 0x7ff) << PAGE_SHIFT; + else + return (get_random_int() & mmap_rnd_mask) << PAGE_SHIFT; } static unsigned long mmap_base_legacy(void) @@ -81,6 +87,106 @@ static inline unsigned long mmap_base(void) return STACK_TOP - stack_maxrandom_size() - mmap_rnd() - gap; } +unsigned long +arch_get_unmapped_area(struct file *filp, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags) +{ + struct mm_struct *mm = current->mm; + struct vm_area_struct *vma; + struct vm_unmapped_area_info info; + int do_color_align; + + if (len > TASK_SIZE - mmap_min_addr) + return -ENOMEM; + + if (flags & MAP_FIXED) + return addr; + + if (addr) { + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + do_color_align = 0; + if (filp || (flags & MAP_SHARED)) + do_color_align = !is_32bit_task(); + + info.flags = 0; + info.length = len; + info.low_limit = mm->mmap_base; + info.high_limit = TASK_SIZE; + info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + return vm_unmapped_area(&info); +} + +unsigned long +arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0, + const unsigned long len, const unsigned long pgoff, + const unsigned long flags) +{ + struct vm_area_struct *vma; + struct mm_struct *mm = current->mm; + unsigned long addr = addr0; + struct vm_unmapped_area_info info; + int do_color_align; + + /* requested length too big for entire address space */ + if (len > TASK_SIZE - mmap_min_addr) + return -ENOMEM; + + if (flags & MAP_FIXED) + return addr; + + /* requesting a specific address */ + if (addr) { + addr = PAGE_ALIGN(addr); + vma = find_vma(mm, addr); + if (TASK_SIZE - len >= addr && addr >= mmap_min_addr && + (!vma || addr + len <= vma->vm_start)) + return addr; + } + + do_color_align = 0; + if (filp || (flags & MAP_SHARED)) + do_color_align = !is_32bit_task(); + + info.flags = VM_UNMAPPED_AREA_TOPDOWN; + info.length = len; + info.low_limit = max(PAGE_SIZE, mmap_min_addr); + info.high_limit = mm->mmap_base; + info.align_mask = do_color_align ? (mmap_align_mask << PAGE_SHIFT) : 0; + info.align_offset = pgoff << PAGE_SHIFT; + addr = vm_unmapped_area(&info); + + /* + * A failed mmap() very likely causes application failure, + * so fall back to the bottom-up function here. This scenario + * can happen with large stack limits and large mmap() + * allocations. + */ + if (addr & ~PAGE_MASK) { + VM_BUG_ON(addr != -ENOMEM); + info.flags = 0; + info.low_limit = TASK_UNMAPPED_BASE; + info.high_limit = TASK_SIZE; + addr = vm_unmapped_area(&info); + } + + return addr; +} + +unsigned long randomize_et_dyn(void) +{ + unsigned long base; + + base = (STACK_TOP / 3 * 2) & (~mmap_align_mask << PAGE_SHIFT); + return base + mmap_rnd(); +} + #ifndef CONFIG_64BIT /* @@ -177,4 +283,36 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } } +static int __init setup_mmap_rnd(void) +{ + struct cpuid cpu_id; + + get_cpu_id(&cpu_id); + switch (cpu_id.machine) { + case 0x9672: + case 0x2064: + case 0x2066: + case 0x2084: + case 0x2086: + case 0x2094: + case 0x2096: + case 0x2097: + case 0x2098: + case 0x2817: + case 0x2818: + case 0x2827: + case 0x2828: + mmap_rnd_mask = 0x7ffUL; + mmap_align_mask = 0UL; + break; + case 0x2964: /* z13 */ + default: + mmap_rnd_mask = 0x3ff80UL; + mmap_align_mask = 0x7fUL; + break; + } + return 0; +} +early_initcall(setup_mmap_rnd); + #endif -- cgit v1.2.3-70-g09d2 From 10ad34bc76dfbc49bda327a13012f6754c0c72e0 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 14 Jan 2015 17:52:10 +0100 Subject: s390: add SMT support The multi-threading facility is introduced with the z13 processor family. This patch adds code to detect the multi-threading facility. With the facility enabled each core will surface multiple hardware threads to the system. Each hardware threads looks like a normal CPU to the operating system with all its registers and properties. The SCLP interface reports the SMT topology indirectly via the maximum thread id. Each reported CPU in the result of a read-scp-information is a core representing a number of hardware threads. To reflect the reduced CPU capacity if two hardware threads run on a single core the MT utilization counter set is used to normalize the raw cputime obtained by the CPU timer deltas. This scaled cputime is reported via the taskstats interface. The normal /proc/stat numbers are based on the raw cputime and are not affected by the normalization. Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 15 ++- arch/s390/include/asm/cpu_mf.h | 14 +++ arch/s390/include/asm/reset.h | 3 +- arch/s390/include/asm/sclp.h | 5 +- arch/s390/include/asm/sigp.h | 1 + arch/s390/include/asm/smp.h | 4 + arch/s390/include/asm/sysinfo.h | 20 +-- arch/s390/include/asm/topology.h | 4 + arch/s390/kernel/base.S | 3 +- arch/s390/kernel/dis.c | 8 +- arch/s390/kernel/ipl.c | 11 +- arch/s390/kernel/machine_kexec.c | 19 ++- arch/s390/kernel/smp.c | 261 ++++++++++++++++++++++++++++++--------- arch/s390/kernel/sysinfo.c | 8 ++ arch/s390/kernel/topology.c | 63 +++++++--- arch/s390/kernel/vtime.c | 58 ++++++++- drivers/s390/char/sclp_early.c | 49 ++++++-- drivers/s390/cio/cio.c | 2 +- 18 files changed, 430 insertions(+), 118 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 06c6d9ab5a8d..7eba5b5723e9 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -396,17 +396,26 @@ config HOTPLUG_CPU can be controlled through /sys/devices/system/cpu/cpu#. Say N if you want to disable CPU hotplug. +config SCHED_SMT + def_bool n + config SCHED_MC def_bool n config SCHED_BOOK + def_bool n + +config SCHED_TOPOLOGY def_bool y - prompt "Book scheduler support" + prompt "Topology scheduler support" depends on SMP + select SCHED_SMT select SCHED_MC + select SCHED_BOOK help - Book scheduler support improves the CPU scheduler's decision making - when dealing with machines that have several books. + Topology scheduler support improves the CPU scheduler's decision + making when dealing with machines that have multi-threading, + multiple cores or multiple books. source kernel/Kconfig.preempt diff --git a/arch/s390/include/asm/cpu_mf.h b/arch/s390/include/asm/cpu_mf.h index cb700d54bd83..5243a8679a1d 100644 --- a/arch/s390/include/asm/cpu_mf.h +++ b/arch/s390/include/asm/cpu_mf.h @@ -189,6 +189,20 @@ static inline int ecctr(u64 ctr, u64 *val) return cc; } +/* Store CPU counter multiple for the MT utilization counter set */ +static inline int stcctm5(u64 num, u64 *val) +{ + typedef struct { u64 _[num]; } addrtype; + int cc; + + asm volatile ( + " .insn rsy,0xeb0000000017,%2,5,%1\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc), "=Q" (*(addrtype *) val) : "d" (num) : "cc"); + return cc; +} + /* Query sampling information */ static inline int qsi(struct hws_qsi_info_block *info) { diff --git a/arch/s390/include/asm/reset.h b/arch/s390/include/asm/reset.h index 804578587a7a..72786067b300 100644 --- a/arch/s390/include/asm/reset.h +++ b/arch/s390/include/asm/reset.h @@ -15,5 +15,6 @@ struct reset_call { extern void register_reset_call(struct reset_call *reset); extern void unregister_reset_call(struct reset_call *reset); -extern void s390_reset_system(void (*func)(void *), void *data); +extern void s390_reset_system(void (*fn_pre)(void), + void (*fn_post)(void *), void *data); #endif /* _ASM_S390_RESET_H */ diff --git a/arch/s390/include/asm/sclp.h b/arch/s390/include/asm/sclp.h index b6f8066789c1..edb453cfc2c6 100644 --- a/arch/s390/include/asm/sclp.h +++ b/arch/s390/include/asm/sclp.h @@ -27,7 +27,7 @@ struct sclp_ipl_info { }; struct sclp_cpu_entry { - u8 address; + u8 core_id; u8 reserved0[2]; u8 : 3; u8 siif : 1; @@ -51,6 +51,9 @@ int sclp_cpu_deconfigure(u8 cpu); unsigned long long sclp_get_rnmax(void); unsigned long long sclp_get_rzm(void); unsigned int sclp_get_max_cpu(void); +unsigned int sclp_get_mtid(u8 cpu_type); +unsigned int sclp_get_mtid_max(void); +unsigned int sclp_get_mtid_prev(void); int sclp_sdias_blk_count(void); int sclp_sdias_copy(void *dest, int blk_num, int nr_blks); int sclp_chp_configure(struct chp_id chpid); diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index 49576115dbb7..c49d9c0483a8 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -15,6 +15,7 @@ #define SIGP_SET_ARCHITECTURE 18 #define SIGP_COND_EMERGENCY_SIGNAL 19 #define SIGP_SENSE_RUNNING 21 +#define SIGP_SET_MULTI_THREADING 22 #define SIGP_STORE_ADDITIONAL_STATUS 23 /* SIGP condition codes */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index 762d4f88af5a..b3bd0282dd98 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -16,6 +16,8 @@ #define raw_smp_processor_id() (S390_lowcore.cpu_nr) extern struct mutex smp_cpu_state_mutex; +extern unsigned int smp_cpu_mt_shift; +extern unsigned int smp_cpu_mtid; extern int __cpu_up(unsigned int cpu, struct task_struct *tidle); @@ -35,6 +37,8 @@ extern void smp_fill_possible_mask(void); #else /* CONFIG_SMP */ +#define smp_cpu_mtid 0 + static inline void smp_call_ipl_cpu(void (*func)(void *), void *data) { func(data); diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h index f92428e459f8..73f12d21af4d 100644 --- a/arch/s390/include/asm/sysinfo.h +++ b/arch/s390/include/asm/sysinfo.h @@ -90,7 +90,11 @@ struct sysinfo_2_2_2 { unsigned short cpus_reserved; char name[8]; unsigned int caf; - char reserved_2[16]; + char reserved_2[8]; + unsigned char mt_installed; + unsigned char mt_general; + unsigned char mt_psmtid; + char reserved_3[5]; unsigned short cpus_dedicated; unsigned short cpus_shared; }; @@ -120,26 +124,28 @@ struct sysinfo_3_2_2 { extern int topology_max_mnest; -#define TOPOLOGY_CPU_BITS 64 +#define TOPOLOGY_CORE_BITS 64 #define TOPOLOGY_NR_MAG 6 -struct topology_cpu { - unsigned char reserved0[4]; +struct topology_core { + unsigned char nl; + unsigned char reserved0[3]; unsigned char :6; unsigned char pp:2; unsigned char reserved1; unsigned short origin; - unsigned long mask[TOPOLOGY_CPU_BITS / BITS_PER_LONG]; + unsigned long mask[TOPOLOGY_CORE_BITS / BITS_PER_LONG]; }; struct topology_container { - unsigned char reserved[7]; + unsigned char nl; + unsigned char reserved[6]; unsigned char id; }; union topology_entry { unsigned char nl; - struct topology_cpu cpu; + struct topology_core cpu; struct topology_container container; }; diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index 56af53093d24..c4fbb9527c5c 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -9,9 +9,11 @@ struct cpu; #ifdef CONFIG_SCHED_BOOK struct cpu_topology_s390 { + unsigned short thread_id; unsigned short core_id; unsigned short socket_id; unsigned short book_id; + cpumask_t thread_mask; cpumask_t core_mask; cpumask_t book_mask; }; @@ -19,6 +21,8 @@ struct cpu_topology_s390 { extern struct cpu_topology_s390 cpu_topology[NR_CPUS]; #define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id) +#define topology_thread_id(cpu) (cpu_topology[cpu].thread_id) +#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_mask) #define topology_core_id(cpu) (cpu_topology[cpu].core_id) #define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_mask) #define topology_book_id(cpu) (cpu_topology[cpu].book_id) diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S index 797a823a2275..f74a53d339b0 100644 --- a/arch/s390/kernel/base.S +++ b/arch/s390/kernel/base.S @@ -97,7 +97,8 @@ ENTRY(diag308_reset) lg %r4,0(%r4) # Save PSW sturg %r4,%r3 # Use sturg, because of large pages lghi %r1,1 - diag %r1,%r1,0x308 + lghi %r0,0 + diag %r0,%r1,0x308 .Lrestart_part2: lhi %r0,0 # Load r0 with zero lhi %r1,2 # Use mode 2 = ESAME (dump) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index d46d0b0b2cda..533430307da8 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -137,7 +137,7 @@ enum { INSTR_RSI_RRP, INSTR_RSL_LRDFU, INSTR_RSL_R0RD, INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD, INSTR_RSY_RURD, - INSTR_RSY_RDRM, + INSTR_RSY_RDRM, INSTR_RSY_RMRD, INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD, INSTR_RS_RRRD, INSTR_RS_RURD, INSTR_RXE_FRRD, INSTR_RXE_RRRD, INSTR_RXE_RRRDM, @@ -307,6 +307,7 @@ static const unsigned char formats[][7] = { [INSTR_RSY_AARD] = { 0xff, A_8,A_12,D20_20,B_16,0,0 }, [INSTR_RSY_CCRD] = { 0xff, C_8,C_12,D20_20,B_16,0,0 }, [INSTR_RSY_RDRM] = { 0xff, R_8,D20_20,B_16,U4_12,0,0 }, + [INSTR_RSY_RMRD] = { 0xff, R_8,U4_12,D20_20,B_16,0,0 }, [INSTR_RSY_RRRD] = { 0xff, R_8,R_12,D20_20,B_16,0,0 }, [INSTR_RSY_RURD] = { 0xff, R_8,U4_12,D20_20,B_16,0,0 }, [INSTR_RS_AARD] = { 0xff, A_8,A_12,D_20,B_16,0,0 }, @@ -450,7 +451,8 @@ enum { LONG_INSN_VERLLV, LONG_INSN_VESRAV, LONG_INSN_VESRLV, - LONG_INSN_VSBCBI + LONG_INSN_VSBCBI, + LONG_INSN_STCCTM }; static char *long_insn_name[] = { @@ -530,6 +532,7 @@ static char *long_insn_name[] = { [LONG_INSN_VESRAV] = "vesrav", [LONG_INSN_VESRLV] = "vesrlv", [LONG_INSN_VSBCBI] = "vsbcbi", + [LONG_INSN_STCCTM] = "stcctm", }; static struct s390_insn opcode[] = { @@ -1655,6 +1658,7 @@ static struct s390_insn opcode_eb[] = { { "lric", 0x60, INSTR_RSY_RDRM }, { "stric", 0x61, INSTR_RSY_RDRM }, { "mric", 0x62, INSTR_RSY_RDRM }, + { { 0, LONG_INSN_STCCTM }, 0x17, INSTR_RSY_RMRD }, #endif { "rll", 0x1d, INSTR_RSY_RRRD }, { "mvclu", 0x8e, INSTR_RSY_RRRD }, diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 39badb9ca0b3..5c8651f36509 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -2074,7 +2074,8 @@ static void do_reset_calls(void) u32 dump_prefix_page; -void s390_reset_system(void (*func)(void *), void *data) +void s390_reset_system(void (*fn_pre)(void), + void (*fn_post)(void *), void *data) { struct _lowcore *lc; @@ -2112,7 +2113,11 @@ void s390_reset_system(void (*func)(void *), void *data) /* Store status at absolute zero */ store_status(); + /* Call function before reset */ + if (fn_pre) + fn_pre(); do_reset_calls(); - if (func) - func(data); + /* Call function after reset */ + if (fn_post) + fn_post(data); } diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c index 4685337fa7c6..fb0901ec4306 100644 --- a/arch/s390/kernel/machine_kexec.c +++ b/arch/s390/kernel/machine_kexec.c @@ -103,21 +103,18 @@ static int __init machine_kdump_pm_init(void) return 0; } arch_initcall(machine_kdump_pm_init); -#endif /* * Start kdump: We expect here that a store status has been done on our CPU */ static void __do_machine_kdump(void *image) { -#ifdef CONFIG_CRASH_DUMP int (*start_kdump)(int) = (void *)((struct kimage *) image)->start; - setup_regs(); __load_psw_mask(PSW_MASK_BASE | PSW_DEFAULT_KEY | PSW_MASK_EA | PSW_MASK_BA); start_kdump(1); -#endif } +#endif /* * Check if kdump checksums are valid: We call purgatory with parameter "0" @@ -249,18 +246,18 @@ static void __do_machine_kexec(void *data) */ static void __machine_kexec(void *data) { - struct kimage *image = data; - __arch_local_irq_stosm(0x04); /* enable DAT */ pfault_fini(); tracing_off(); debug_locks_off(); - if (image->type == KEXEC_TYPE_CRASH) { +#ifdef CONFIG_CRASH_DUMP + if (((struct kimage *) data)->type == KEXEC_TYPE_CRASH) { + lgr_info_log(); - s390_reset_system(__do_machine_kdump, data); - } else { - s390_reset_system(__do_machine_kexec, data); - } + s390_reset_system(setup_regs, __do_machine_kdump, data); + } else +#endif + s390_reset_system(NULL, __do_machine_kexec, data); disabled_wait((unsigned long) __builtin_return_address(0)); } diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 0b499f5cbe19..370ff3a092a3 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -71,9 +71,30 @@ struct pcpu { }; static u8 boot_cpu_type; -static u16 boot_cpu_address; static struct pcpu pcpu_devices[NR_CPUS]; +unsigned int smp_cpu_mt_shift; +EXPORT_SYMBOL(smp_cpu_mt_shift); + +unsigned int smp_cpu_mtid; +EXPORT_SYMBOL(smp_cpu_mtid); + +static unsigned int smp_max_threads __initdata = -1U; + +static int __init early_nosmt(char *s) +{ + smp_max_threads = 1; + return 0; +} +early_param("nosmt", early_nosmt); + +static int __init early_smt(char *s) +{ + get_option(&s, &smp_max_threads); + return 0; +} +early_param("smt", early_smt); + /* * The smp_cpu_state_mutex must be held when changing the state or polarization * member of a pcpu data structure within the pcpu_devices arreay. @@ -132,7 +153,7 @@ static inline int pcpu_running(struct pcpu *pcpu) /* * Find struct pcpu by cpu address. */ -static struct pcpu *pcpu_find_address(const struct cpumask *mask, int address) +static struct pcpu *pcpu_find_address(const struct cpumask *mask, u16 address) { int cpu; @@ -298,6 +319,32 @@ static void pcpu_delegate(struct pcpu *pcpu, void (*func)(void *), for (;;) ; } +/* + * Enable additional logical cpus for multi-threading. + */ +static int pcpu_set_smt(unsigned int mtid) +{ + register unsigned long reg1 asm ("1") = (unsigned long) mtid; + int cc; + + if (smp_cpu_mtid == mtid) + return 0; + asm volatile( + " sigp %1,0,%2 # sigp set multi-threading\n" + " ipm %0\n" + " srl %0,28\n" + : "=d" (cc) : "d" (reg1), "K" (SIGP_SET_MULTI_THREADING) + : "cc"); + if (cc == 0) { + smp_cpu_mtid = mtid; + smp_cpu_mt_shift = 0; + while (smp_cpu_mtid >= (1U << smp_cpu_mt_shift)) + smp_cpu_mt_shift++; + pcpu_devices[0].address = stap(); + } + return cc; +} + /* * Call function on an online CPU. */ @@ -512,22 +559,17 @@ EXPORT_SYMBOL(smp_ctl_clear_bit); #ifdef CONFIG_CRASH_DUMP -static void __init smp_get_save_area(int cpu, u16 address) +static inline void __smp_store_cpu_state(int cpu, u16 address, int is_boot_cpu) { void *lc = pcpu_devices[0].lowcore; struct save_area_ext *sa_ext; unsigned long vx_sa; - if (is_kdump_kernel()) - return; - if (!OLDMEM_BASE && (address == boot_cpu_address || - ipl_info.type != IPL_TYPE_FCP_DUMP)) - return; sa_ext = dump_save_area_create(cpu); if (!sa_ext) panic("could not allocate memory for save area\n"); - if (address == boot_cpu_address) { - /* Copy the registers of the boot cpu. */ + if (is_boot_cpu) { + /* Copy the registers of the boot CPU. */ copy_oldmem_page(1, (void *) &sa_ext->sa, sizeof(sa_ext->sa), SAVE_AREA_BASE - PAGE_SIZE, 0); if (MACHINE_HAS_VX) @@ -548,6 +590,64 @@ static void __init smp_get_save_area(int cpu, u16 address) free_page(vx_sa); } +/* + * Collect CPU state of the previous, crashed system. + * There are four cases: + * 1) standard zfcp dump + * condition: OLDMEM_BASE == NULL && ipl_info.type == IPL_TYPE_FCP_DUMP + * The state for all CPUs except the boot CPU needs to be collected + * with sigp stop-and-store-status. The boot CPU state is located in + * the absolute lowcore of the memory stored in the HSA. The zcore code + * will allocate the save area and copy the boot CPU state from the HSA. + * 2) stand-alone kdump for SCSI (zfcp dump with swapped memory) + * condition: OLDMEM_BASE != NULL && ipl_info.type == IPL_TYPE_FCP_DUMP + * The state for all CPUs except the boot CPU needs to be collected + * with sigp stop-and-store-status. The firmware or the boot-loader + * stored the registers of the boot CPU in the absolute lowcore in the + * memory of the old system. + * 3) kdump and the old kernel did not store the CPU state, + * or stand-alone kdump for DASD + * condition: OLDMEM_BASE != NULL && !is_kdump_kernel() + * The state for all CPUs except the boot CPU needs to be collected + * with sigp stop-and-store-status. The kexec code or the boot-loader + * stored the registers of the boot CPU in the memory of the old system. + * 4) kdump and the old kernel stored the CPU state + * condition: OLDMEM_BASE != NULL && is_kdump_kernel() + * The state of all CPUs is stored in ELF sections in the memory of the + * old system. The ELF sections are picked up by the crash_dump code + * via elfcorehdr_addr. + */ +static void __init smp_store_cpu_states(struct sclp_cpu_info *info) +{ + unsigned int cpu, address, i, j; + int is_boot_cpu; + + if (is_kdump_kernel()) + /* Previous system stored the CPU states. Nothing to do. */ + return; + if (!(OLDMEM_BASE || ipl_info.type == IPL_TYPE_FCP_DUMP)) + /* No previous system present, normal boot. */ + return; + /* Set multi-threading state to the previous system. */ + pcpu_set_smt(sclp_get_mtid_prev()); + /* Collect CPU states. */ + cpu = 0; + for (i = 0; i < info->configured; i++) { + /* Skip CPUs with different CPU type. */ + if (info->has_cpu_type && info->cpu[i].type != boot_cpu_type) + continue; + for (j = 0; j <= smp_cpu_mtid; j++, cpu++) { + address = (info->cpu[i].core_id << smp_cpu_mt_shift) + j; + is_boot_cpu = (address == pcpu_devices[0].address); + if (is_boot_cpu && !OLDMEM_BASE) + /* Skip boot CPU for standard zfcp dump. */ + continue; + /* Get state for this CPu. */ + __smp_store_cpu_state(cpu, address, is_boot_cpu); + } + } +} + int smp_store_status(int cpu) { unsigned long vx_sa; @@ -565,10 +665,6 @@ int smp_store_status(int cpu) return 0; } -#else /* CONFIG_CRASH_DUMP */ - -static inline void smp_get_save_area(int cpu, u16 address) { } - #endif /* CONFIG_CRASH_DUMP */ void smp_cpu_set_polarization(int cpu, int val) @@ -590,11 +686,13 @@ static struct sclp_cpu_info *smp_get_cpu_info(void) info = kzalloc(sizeof(*info), GFP_KERNEL); if (info && (use_sigp_detection || sclp_get_cpu_info(info))) { use_sigp_detection = 1; - for (address = 0; address <= MAX_CPU_ADDRESS; address++) { + for (address = 0; address <= MAX_CPU_ADDRESS; + address += (1U << smp_cpu_mt_shift)) { if (__pcpu_sigp_relax(address, SIGP_SENSE, 0, NULL) == SIGP_CC_NOT_OPERATIONAL) continue; - info->cpu[info->configured].address = address; + info->cpu[info->configured].core_id = + address >> smp_cpu_mt_shift; info->configured++; } info->combined = info->configured; @@ -608,7 +706,8 @@ static int __smp_rescan_cpus(struct sclp_cpu_info *info, int sysfs_add) { struct pcpu *pcpu; cpumask_t avail; - int cpu, nr, i; + int cpu, nr, i, j; + u16 address; nr = 0; cpumask_xor(&avail, cpu_possible_mask, cpu_present_mask); @@ -616,51 +715,76 @@ static int __smp_rescan_cpus(struct sclp_cpu_info *info, int sysfs_add) for (i = 0; (i < info->combined) && (cpu < nr_cpu_ids); i++) { if (info->has_cpu_type && info->cpu[i].type != boot_cpu_type) continue; - if (pcpu_find_address(cpu_present_mask, info->cpu[i].address)) - continue; - pcpu = pcpu_devices + cpu; - pcpu->address = info->cpu[i].address; - pcpu->state = (i >= info->configured) ? - CPU_STATE_STANDBY : CPU_STATE_CONFIGURED; - smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); - set_cpu_present(cpu, true); - if (sysfs_add && smp_add_present_cpu(cpu) != 0) - set_cpu_present(cpu, false); - else - nr++; - cpu = cpumask_next(cpu, &avail); + address = info->cpu[i].core_id << smp_cpu_mt_shift; + for (j = 0; j <= smp_cpu_mtid; j++) { + if (pcpu_find_address(cpu_present_mask, address + j)) + continue; + pcpu = pcpu_devices + cpu; + pcpu->address = address + j; + pcpu->state = + (cpu >= info->configured*(smp_cpu_mtid + 1)) ? + CPU_STATE_STANDBY : CPU_STATE_CONFIGURED; + smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); + set_cpu_present(cpu, true); + if (sysfs_add && smp_add_present_cpu(cpu) != 0) + set_cpu_present(cpu, false); + else + nr++; + cpu = cpumask_next(cpu, &avail); + if (cpu >= nr_cpu_ids) + break; + } } return nr; } static void __init smp_detect_cpus(void) { - unsigned int cpu, c_cpus, s_cpus; + unsigned int cpu, mtid, c_cpus, s_cpus; struct sclp_cpu_info *info; + u16 address; + /* Get CPU information */ info = smp_get_cpu_info(); if (!info) panic("smp_detect_cpus failed to allocate memory\n"); + + /* Find boot CPU type */ if (info->has_cpu_type) { - for (cpu = 0; cpu < info->combined; cpu++) { - if (info->cpu[cpu].address != boot_cpu_address) - continue; - /* The boot cpu dictates the cpu type. */ - boot_cpu_type = info->cpu[cpu].type; - break; - } + address = stap(); + for (cpu = 0; cpu < info->combined; cpu++) + if (info->cpu[cpu].core_id == address) { + /* The boot cpu dictates the cpu type. */ + boot_cpu_type = info->cpu[cpu].type; + break; + } + if (cpu >= info->combined) + panic("Could not find boot CPU type"); } + +#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP) + /* Collect CPU state of previous system */ + smp_store_cpu_states(info); +#endif + + /* Set multi-threading state for the current system */ + mtid = sclp_get_mtid(boot_cpu_type); + mtid = (mtid < smp_max_threads) ? mtid : smp_max_threads - 1; + pcpu_set_smt(mtid); + + /* Print number of CPUs */ c_cpus = s_cpus = 0; for (cpu = 0; cpu < info->combined; cpu++) { if (info->has_cpu_type && info->cpu[cpu].type != boot_cpu_type) continue; - if (cpu < info->configured) { - smp_get_save_area(c_cpus, info->cpu[cpu].address); - c_cpus++; - } else - s_cpus++; + if (cpu < info->configured) + c_cpus += smp_cpu_mtid + 1; + else + s_cpus += smp_cpu_mtid + 1; } pr_info("%d configured CPUs, %d standby CPUs\n", c_cpus, s_cpus); + + /* Add CPUs present at boot */ get_online_cpus(); __smp_rescan_cpus(info, 0); put_online_cpus(); @@ -696,12 +820,23 @@ static void smp_start_secondary(void *cpuvoid) int __cpu_up(unsigned int cpu, struct task_struct *tidle) { struct pcpu *pcpu; - int rc; + int base, i, rc; pcpu = pcpu_devices + cpu; if (pcpu->state != CPU_STATE_CONFIGURED) return -EIO; - if (pcpu_sigp_retry(pcpu, SIGP_INITIAL_CPU_RESET, 0) != + base = cpu - (cpu % (smp_cpu_mtid + 1)); + for (i = 0; i <= smp_cpu_mtid; i++) { + if (base + i < nr_cpu_ids) + if (cpu_online(base + i)) + break; + } + /* + * If this is the first CPU of the core to get online + * do an initial CPU reset. + */ + if (i > smp_cpu_mtid && + pcpu_sigp_retry(pcpu_devices + base, SIGP_INITIAL_CPU_RESET, 0) != SIGP_CC_ORDER_CODE_ACCEPTED) return -EIO; @@ -774,7 +909,8 @@ void __init smp_fill_possible_mask(void) { unsigned int possible, sclp, cpu; - sclp = sclp_get_max_cpu() ?: nr_cpu_ids; + sclp = min(smp_max_threads, sclp_get_mtid_max() + 1); + sclp = sclp_get_max_cpu()*sclp ?: nr_cpu_ids; possible = setup_possible_cpus ?: nr_cpu_ids; possible = min(possible, sclp); for (cpu = 0; cpu < possible && cpu < nr_cpu_ids; cpu++) @@ -796,9 +932,8 @@ void __init smp_prepare_boot_cpu(void) { struct pcpu *pcpu = pcpu_devices; - boot_cpu_address = stap(); pcpu->state = CPU_STATE_CONFIGURED; - pcpu->address = boot_cpu_address; + pcpu->address = stap(); pcpu->lowcore = (struct _lowcore *)(unsigned long) store_prefix(); pcpu->async_stack = S390_lowcore.async_stack - ASYNC_SIZE + STACK_FRAME_OVERHEAD + sizeof(struct pt_regs); @@ -848,7 +983,7 @@ static ssize_t cpu_configure_store(struct device *dev, const char *buf, size_t count) { struct pcpu *pcpu; - int cpu, val, rc; + int cpu, val, rc, i; char delim; if (sscanf(buf, "%d %c", &val, &delim) != 1) @@ -860,29 +995,43 @@ static ssize_t cpu_configure_store(struct device *dev, rc = -EBUSY; /* disallow configuration changes of online cpus and cpu 0 */ cpu = dev->id; - if (cpu_online(cpu) || cpu == 0) + cpu -= cpu % (smp_cpu_mtid + 1); + if (cpu == 0) goto out; + for (i = 0; i <= smp_cpu_mtid; i++) + if (cpu_online(cpu + i)) + goto out; pcpu = pcpu_devices + cpu; rc = 0; switch (val) { case 0: if (pcpu->state != CPU_STATE_CONFIGURED) break; - rc = sclp_cpu_deconfigure(pcpu->address); + rc = sclp_cpu_deconfigure(pcpu->address >> smp_cpu_mt_shift); if (rc) break; - pcpu->state = CPU_STATE_STANDBY; - smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); + for (i = 0; i <= smp_cpu_mtid; i++) { + if (cpu + i >= nr_cpu_ids || !cpu_present(cpu + i)) + continue; + pcpu[i].state = CPU_STATE_STANDBY; + smp_cpu_set_polarization(cpu + i, + POLARIZATION_UNKNOWN); + } topology_expect_change(); break; case 1: if (pcpu->state != CPU_STATE_STANDBY) break; - rc = sclp_cpu_configure(pcpu->address); + rc = sclp_cpu_configure(pcpu->address >> smp_cpu_mt_shift); if (rc) break; - pcpu->state = CPU_STATE_CONFIGURED; - smp_cpu_set_polarization(cpu, POLARIZATION_UNKNOWN); + for (i = 0; i <= smp_cpu_mtid; i++) { + if (cpu + i >= nr_cpu_ids || !cpu_present(cpu + i)) + continue; + pcpu[i].state = CPU_STATE_CONFIGURED; + smp_cpu_set_polarization(cpu + i, + POLARIZATION_UNKNOWN); + } topology_expect_change(); break; default: diff --git a/arch/s390/kernel/sysinfo.c b/arch/s390/kernel/sysinfo.c index 811f542b8ed4..85565f1ff474 100644 --- a/arch/s390/kernel/sysinfo.c +++ b/arch/s390/kernel/sysinfo.c @@ -194,6 +194,14 @@ static void stsi_2_2_2(struct seq_file *m, struct sysinfo_2_2_2 *info) seq_printf(m, "LPAR CPUs Reserved: %d\n", info->cpus_reserved); seq_printf(m, "LPAR CPUs Dedicated: %d\n", info->cpus_dedicated); seq_printf(m, "LPAR CPUs Shared: %d\n", info->cpus_shared); + if (info->mt_installed & 0x80) { + seq_printf(m, "LPAR CPUs G-MTID: %d\n", + info->mt_general & 0x1f); + seq_printf(m, "LPAR CPUs S-MTID: %d\n", + info->mt_installed & 0x1f); + seq_printf(m, "LPAR CPUs PS-MTID: %d\n", + info->mt_psmtid & 0x1f); + } } static void stsi_3_2_2(struct seq_file *m, struct sysinfo_3_2_2 *info) diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index b93bed76ea94..24ee33f1af24 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -59,32 +59,50 @@ static cpumask_t cpu_group_map(struct mask_info *info, unsigned int cpu) return mask; } -static struct mask_info *add_cpus_to_mask(struct topology_cpu *tl_cpu, +static cpumask_t cpu_thread_map(unsigned int cpu) +{ + cpumask_t mask; + int i; + + cpumask_copy(&mask, cpumask_of(cpu)); + if (!topology_enabled || !MACHINE_HAS_TOPOLOGY) + return mask; + cpu -= cpu % (smp_cpu_mtid + 1); + for (i = 0; i <= smp_cpu_mtid; i++) + if (cpu_present(cpu + i)) + cpumask_set_cpu(cpu + i, &mask); + return mask; +} + +static struct mask_info *add_cpus_to_mask(struct topology_core *tl_core, struct mask_info *book, struct mask_info *socket, int one_socket_per_cpu) { - unsigned int cpu; + unsigned int core; - for_each_set_bit(cpu, &tl_cpu->mask[0], TOPOLOGY_CPU_BITS) { - unsigned int rcpu; - int lcpu; + for_each_set_bit(core, &tl_core->mask[0], TOPOLOGY_CORE_BITS) { + unsigned int rcore; + int lcpu, i; - rcpu = TOPOLOGY_CPU_BITS - 1 - cpu + tl_cpu->origin; - lcpu = smp_find_processor_id(rcpu); + rcore = TOPOLOGY_CORE_BITS - 1 - core + tl_core->origin; + lcpu = smp_find_processor_id(rcore << smp_cpu_mt_shift); if (lcpu < 0) continue; - cpumask_set_cpu(lcpu, &book->mask); - cpu_topology[lcpu].book_id = book->id; - cpumask_set_cpu(lcpu, &socket->mask); - cpu_topology[lcpu].core_id = rcpu; - if (one_socket_per_cpu) { - cpu_topology[lcpu].socket_id = rcpu; - socket = socket->next; - } else { - cpu_topology[lcpu].socket_id = socket->id; + for (i = 0; i <= smp_cpu_mtid; i++) { + cpu_topology[lcpu + i].book_id = book->id; + cpu_topology[lcpu + i].core_id = rcore; + cpu_topology[lcpu + i].thread_id = lcpu + i; + cpumask_set_cpu(lcpu + i, &book->mask); + cpumask_set_cpu(lcpu + i, &socket->mask); + if (one_socket_per_cpu) + cpu_topology[lcpu + i].socket_id = rcore; + else + cpu_topology[lcpu + i].socket_id = socket->id; + smp_cpu_set_polarization(lcpu + i, tl_core->pp); } - smp_cpu_set_polarization(lcpu, tl_cpu->pp); + if (one_socket_per_cpu) + socket = socket->next; } return socket; } @@ -108,7 +126,7 @@ static void clear_masks(void) static union topology_entry *next_tle(union topology_entry *tle) { if (!tle->nl) - return (union topology_entry *)((struct topology_cpu *)tle + 1); + return (union topology_entry *)((struct topology_core *)tle + 1); return (union topology_entry *)((struct topology_container *)tle + 1); } @@ -231,9 +249,11 @@ static void update_cpu_masks(void) spin_lock_irqsave(&topology_lock, flags); for_each_possible_cpu(cpu) { + cpu_topology[cpu].thread_mask = cpu_thread_map(cpu); cpu_topology[cpu].core_mask = cpu_group_map(&socket_info, cpu); cpu_topology[cpu].book_mask = cpu_group_map(&book_info, cpu); if (!MACHINE_HAS_TOPOLOGY) { + cpu_topology[cpu].thread_id = cpu; cpu_topology[cpu].core_id = cpu; cpu_topology[cpu].socket_id = cpu; cpu_topology[cpu].book_id = cpu; @@ -445,6 +465,12 @@ int topology_cpu_init(struct cpu *cpu) return sysfs_create_group(&cpu->dev.kobj, &topology_cpu_attr_group); } +const struct cpumask *cpu_thread_mask(int cpu) +{ + return &cpu_topology[cpu].thread_mask; +} + + const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_topology[cpu].core_mask; @@ -456,6 +482,7 @@ static const struct cpumask *cpu_book_mask(int cpu) } static struct sched_domain_topology_level s390_topology[] = { + { cpu_thread_mask, cpu_smt_flags, SD_INIT_NAME(SMT) }, { cpu_coregroup_mask, cpu_core_flags, SD_INIT_NAME(MC) }, { cpu_book_mask, SD_INIT_NAME(BOOK) }, { cpu_cpu_mask, SD_INIT_NAME(DIE) }, diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index e34122e539a1..e53d3595a7c8 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -15,6 +15,8 @@ #include #include #include +#include +#include static void virt_timer_expire(void); @@ -23,6 +25,10 @@ static DEFINE_SPINLOCK(virt_timer_lock); static atomic64_t virt_timer_current; static atomic64_t virt_timer_elapsed; +static DEFINE_PER_CPU(u64, mt_cycles[32]); +static DEFINE_PER_CPU(u64, mt_scaling_mult) = { 1 }; +static DEFINE_PER_CPU(u64, mt_scaling_div) = { 1 }; + static inline u64 get_vtimer(void) { u64 timer; @@ -61,6 +67,8 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) { struct thread_info *ti = task_thread_info(tsk); u64 timer, clock, user, system, steal; + u64 user_scaled, system_scaled; + int i; timer = S390_lowcore.last_update_timer; clock = S390_lowcore.last_update_clock; @@ -76,15 +84,49 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer; S390_lowcore.steal_timer += S390_lowcore.last_update_clock - clock; + /* Do MT utilization calculation */ + if (smp_cpu_mtid) { + u64 cycles_new[32], *cycles_old; + u64 delta, mult, div; + + cycles_old = this_cpu_ptr(mt_cycles); + if (stcctm5(smp_cpu_mtid + 1, cycles_new) < 2) { + mult = div = 0; + for (i = 0; i <= smp_cpu_mtid; i++) { + delta = cycles_new[i] - cycles_old[i]; + mult += delta; + div += (i + 1) * delta; + } + if (mult > 0) { + /* Update scaling factor */ + __this_cpu_write(mt_scaling_mult, mult); + __this_cpu_write(mt_scaling_div, div); + memcpy(cycles_old, cycles_new, + sizeof(u64) * (smp_cpu_mtid + 1)); + } + } + } + user = S390_lowcore.user_timer - ti->user_timer; S390_lowcore.steal_timer -= user; ti->user_timer = S390_lowcore.user_timer; - account_user_time(tsk, user, user); system = S390_lowcore.system_timer - ti->system_timer; S390_lowcore.steal_timer -= system; ti->system_timer = S390_lowcore.system_timer; - account_system_time(tsk, hardirq_offset, system, system); + + user_scaled = user; + system_scaled = system; + /* Do MT utilization scaling */ + if (smp_cpu_mtid) { + u64 mult = __this_cpu_read(mt_scaling_mult); + u64 div = __this_cpu_read(mt_scaling_div); + + user_scaled = (user_scaled * mult) / div; + system_scaled = (system_scaled * mult) / div; + } + account_user_time(tsk, user, user_scaled); + account_system_time(tsk, hardirq_offset, system, system_scaled); steal = S390_lowcore.steal_timer; if ((s64) steal > 0) { @@ -126,7 +168,7 @@ void vtime_account_user(struct task_struct *tsk) void vtime_account_irq_enter(struct task_struct *tsk) { struct thread_info *ti = task_thread_info(tsk); - u64 timer, system; + u64 timer, system, system_scaled; timer = S390_lowcore.last_update_timer; S390_lowcore.last_update_timer = get_vtimer(); @@ -135,7 +177,15 @@ void vtime_account_irq_enter(struct task_struct *tsk) system = S390_lowcore.system_timer - ti->system_timer; S390_lowcore.steal_timer -= system; ti->system_timer = S390_lowcore.system_timer; - account_system_time(tsk, 0, system, system); + system_scaled = system; + /* Do MT utilization scaling */ + if (smp_cpu_mtid) { + u64 mult = __this_cpu_read(mt_scaling_mult); + u64 div = __this_cpu_read(mt_scaling_div); + + system_scaled = (system_scaled * mult) / div; + } + account_system_time(tsk, 0, system, system_scaled); virt_timer_forward(system); } diff --git a/drivers/s390/char/sclp_early.c b/drivers/s390/char/sclp_early.c index 5bd6cb145a87..daf6cd5079ec 100644 --- a/drivers/s390/char/sclp_early.c +++ b/drivers/s390/char/sclp_early.c @@ -20,26 +20,31 @@ struct read_info_sccb { struct sccb_header header; /* 0-7 */ u16 rnmax; /* 8-9 */ u8 rnsize; /* 10 */ - u8 _reserved0[16 - 11]; /* 11-15 */ + u8 _pad_11[16 - 11]; /* 11-15 */ u16 ncpurl; /* 16-17 */ u16 cpuoff; /* 18-19 */ - u8 _reserved7[24 - 20]; /* 20-23 */ + u8 _pad_20[24 - 20]; /* 20-23 */ u8 loadparm[8]; /* 24-31 */ - u8 _reserved1[48 - 32]; /* 32-47 */ + u8 _pad_32[42 - 32]; /* 32-41 */ + u8 fac42; /* 42 */ + u8 fac43; /* 43 */ + u8 _pad_44[48 - 44]; /* 44-47 */ u64 facilities; /* 48-55 */ - u8 _reserved2a[76 - 56]; /* 56-75 */ + u8 _pad_56[66 - 56]; /* 56-65 */ + u8 fac66; /* 66 */ + u8 _pad_67[76 - 67]; /* 67-83 */ u32 ibc; /* 76-79 */ - u8 _reserved2b[84 - 80]; /* 80-83 */ + u8 _pad80[84 - 80]; /* 80-83 */ u8 fac84; /* 84 */ u8 fac85; /* 85 */ - u8 _reserved3[91 - 86]; /* 86-90 */ + u8 _pad_86[91 - 86]; /* 86-90 */ u8 flags; /* 91 */ - u8 _reserved4[100 - 92]; /* 92-99 */ + u8 _pad_92[100 - 92]; /* 92-99 */ u32 rnsize2; /* 100-103 */ u64 rnmax2; /* 104-111 */ - u8 _reserved5[120 - 112]; /* 112-119 */ + u8 _pad_112[120 - 112]; /* 112-119 */ u16 hcpua; /* 120-121 */ - u8 _reserved6[4096 - 122]; /* 122-4095 */ + u8 _pad_122[4096 - 122]; /* 122-4095 */ } __packed __aligned(PAGE_SIZE); static char sccb_early[PAGE_SIZE] __aligned(PAGE_SIZE) __initdata; @@ -50,6 +55,10 @@ static unsigned int sclp_max_cpu; static struct sclp_ipl_info sclp_ipl_info; static unsigned char sclp_siif; static u32 sclp_ibc; +static unsigned int sclp_mtid; +static unsigned int sclp_mtid_cp; +static unsigned int sclp_mtid_max; +static unsigned int sclp_mtid_prev; u64 sclp_facilities; u8 sclp_fac84; @@ -128,7 +137,7 @@ static void __init sclp_facilities_detect(struct read_info_sccb *sccb) boot_cpu_address = stap(); cpue = (void *)sccb + sccb->cpuoff; for (cpu = 0; cpu < sccb->ncpurl; cpue++, cpu++) { - if (boot_cpu_address != cpue->address) + if (boot_cpu_address != cpue->core_id) continue; sclp_siif = cpue->siif; break; @@ -139,6 +148,11 @@ static void __init sclp_facilities_detect(struct read_info_sccb *sccb) if (sccb->flags & 0x2) sclp_ipl_info.has_dump = 1; memcpy(&sclp_ipl_info.loadparm, &sccb->loadparm, LOADPARM_LEN); + + sclp_mtid = (sccb->fac42 & 0x80) ? (sccb->fac42 & 31) : 0; + sclp_mtid_cp = (sccb->fac42 & 0x80) ? (sccb->fac43 & 31) : 0; + sclp_mtid_max = max(sclp_mtid, sclp_mtid_cp); + sclp_mtid_prev = (sccb->fac42 & 0x80) ? (sccb->fac66 & 31) : 0; } bool __init sclp_has_linemode(void) @@ -178,6 +192,21 @@ unsigned int sclp_get_ibc(void) } EXPORT_SYMBOL(sclp_get_ibc); +unsigned int sclp_get_mtid(u8 cpu_type) +{ + return cpu_type ? sclp_mtid : sclp_mtid_cp; +} + +unsigned int sclp_get_mtid_max(void) +{ + return sclp_mtid_max; +} + +unsigned int sclp_get_mtid_prev(void) +{ + return sclp_mtid_prev; +} + /* * This function will be called after sclp_facilities_detect(), which gets * called from early.c code. The sclp_facilities_detect() function retrieves diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 10eb738fc81a..3578105989a0 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -938,7 +938,7 @@ void reipl_ccw_dev(struct ccw_dev_id *devid) { struct subchannel_id uninitialized_var(schid); - s390_reset_system(NULL, NULL); + s390_reset_system(NULL, NULL, NULL); if (reipl_find_schid(devid, &schid) != 0) panic("IPL Device not found\n"); do_reipl_asm(*((__u32*)&schid)); -- cgit v1.2.3-70-g09d2 From 5be6fdc090e156bc67b63310b65f4f54523e7b6c Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 16 Jan 2015 18:29:04 +0100 Subject: dcssblk: issue warning when trying to save SN/EN type DCSS The content of a DCSS of type SN or EN cannot be saved. Issue a warning when trying to save such a DCSS. Depending on the setup, this may be a user error or intended behaviour e.g. with a multi-DCSS device. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dcssblk.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/drivers/s390/block/dcssblk.c b/drivers/s390/block/dcssblk.c index b550c8c8d010..7f900229404d 100644 --- a/drivers/s390/block/dcssblk.c +++ b/drivers/s390/block/dcssblk.c @@ -438,7 +438,13 @@ dcssblk_save_store(struct device *dev, struct device_attribute *attr, const char pr_info("All DCSSs that map to device %s are " "saved\n", dev_info->segment_name); list_for_each_entry(entry, &dev_info->seg_list, lh) { - segment_save(entry->segment_name); + if (entry->segment_type == SEG_TYPE_EN || + entry->segment_type == SEG_TYPE_SN) + pr_warn("DCSS %s is of type SN or EN" + " and cannot be saved\n", + entry->segment_name); + else + segment_save(entry->segment_name); } } else { // device is busy => we save it when it becomes @@ -797,7 +803,12 @@ dcssblk_release(struct gendisk *disk, fmode_t mode) pr_info("Device %s has become idle and is being saved " "now\n", dev_info->segment_name); list_for_each_entry(entry, &dev_info->seg_list, lh) { - segment_save(entry->segment_name); + if (entry->segment_type == SEG_TYPE_EN || + entry->segment_type == SEG_TYPE_SN) + pr_warn("DCSS %s is of type SN or EN and cannot" + " be saved\n", entry->segment_name); + else + segment_save(entry->segment_name); } dev_info->save_pending = 0; } -- cgit v1.2.3-70-g09d2 From 032f1be056a2e84f8817b56fe6d76e8e83285578 Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Fri, 16 Jan 2015 10:35:05 +0100 Subject: s390/smp: remove check for CONFIG_ZFCPDUMP Commit 725908110a1f ("s390: add SMT support") added a check for CONFIG_ZFCPDUMP. But the Kconfig symbol ZFCPDUMP was removed in v3.16 through commit bf28a5970de3 ("s390/dump: Remove CONFIG_ZFCPDUMP"). So this check will always evaluate to false. No one noticed probably because the code also checks for CONFIG_CRASH_DUMP which "also enables s390 zfcpdump". Dump the unneeded check. Signed-off-by: Paul Bolle Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/smp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 370ff3a092a3..a668993ff577 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -762,7 +762,7 @@ static void __init smp_detect_cpus(void) panic("Could not find boot CPU type"); } -#if defined(CONFIG_ZFCPDUMP) || defined(CONFIG_CRASH_DUMP) +#ifdef CONFIG_CRASH_DUMP /* Collect CPU state of previous system */ smp_store_cpu_states(info); #endif -- cgit v1.2.3-70-g09d2 From 93568d6fc509923db204320062b1883bc9962b0d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Mon, 16 Jun 2014 10:21:31 -0700 Subject: s390: update default configuration Signed-off-by: Martin Schwidefsky --- arch/s390/configs/default_defconfig | 2 +- arch/s390/configs/gcov_defconfig | 1 + arch/s390/configs/performance_defconfig | 1 + arch/s390/configs/zfcpdump_defconfig | 1 + arch/s390/defconfig | 7 +------ 5 files changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 9432d0f202ef..64707750c780 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -555,7 +555,6 @@ CONFIG_DEBUG_OBJECTS_RCU_HEAD=y CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER=y CONFIG_SLUB_DEBUG_ON=y CONFIG_SLUB_STATS=y -CONFIG_DEBUG_KMEMLEAK=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_DEBUG_VM=y CONFIG_DEBUG_VM_RB=y @@ -563,6 +562,7 @@ CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m CONFIG_DEBUG_PER_CPU_MAPS=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y +CONFIG_PANIC_ON_OOPS=y CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index 219dca6ea926..5c3097272cd8 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -540,6 +540,7 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m +CONFIG_PANIC_ON_OOPS=y CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 822c2f2e0c25..bda70f1ffd2c 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -537,6 +537,7 @@ CONFIG_FRAME_WARN=1024 CONFIG_UNUSED_SYMBOLS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y +CONFIG_PANIC_ON_OOPS=y CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index 9d63051ebec4..1b0184a0f7f2 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -71,6 +71,7 @@ CONFIG_PRINTK_TIME=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y +CONFIG_PANIC_ON_OOPS=y # CONFIG_SCHED_DEBUG is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 785c5f24d6f9..83ef702d2403 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -14,7 +14,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y -CONFIG_RESOURCE_COUNTERS=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y CONFIG_CGROUP_SCHED=y @@ -22,12 +21,8 @@ CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y CONFIG_NAMESPACES=y CONFIG_BLK_DEV_INITRD=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y CONFIG_EXPERT=y +CONFIG_BPF_SYSCALL=y # CONFIG_COMPAT_BRK is not set CONFIG_PROFILING=y CONFIG_OPROFILE=y -- cgit v1.2.3-70-g09d2 From 2ec504934e43e6c47dfdd4436ca58b36f1ab3218 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Mon, 19 Jan 2015 23:02:00 +0100 Subject: s390/hmcdrv: free memory on error path Free allocated page in case of error returned by hmcdrv_ftp_startup. [heiko.carstens@de.ibm.com]: slightly changed Christophe's patch Signed-off-by: Christophe Jaillet Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/hmcdrv_ftp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/s390/char/hmcdrv_ftp.c b/drivers/s390/char/hmcdrv_ftp.c index 4bd63322fc29..d4b61d9088fb 100644 --- a/drivers/s390/char/hmcdrv_ftp.c +++ b/drivers/s390/char/hmcdrv_ftp.c @@ -200,10 +200,9 @@ int hmcdrv_ftp_probe(void) rc = hmcdrv_ftp_startup(); if (rc) - return rc; + goto out; rc = hmcdrv_ftp_do(&ftp); - free_page((unsigned long) ftp.buf); hmcdrv_ftp_shutdown(); switch (rc) { @@ -216,7 +215,8 @@ int hmcdrv_ftp_probe(void) rc = 0; /* clear length (success) */ break; } /* switch */ - +out: + free_page((unsigned long) ftp.buf); return rc; } EXPORT_SYMBOL(hmcdrv_ftp_probe); -- cgit v1.2.3-70-g09d2 From 926a7336a776263b5fdfa7b77fec704be1cae33f Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 16 Dec 2013 10:48:00 +0100 Subject: s390/hvc_iucv: add simple wildcard matches to the iucv allow filter Introduce a wildcard character to filter a range of z/VM user IDs with a single filter entry. Only the leading portion up to the wildcard of an filter entry contributes to the match. This reduces the filter size and avoids configuration updates when deploying new terminal server instances. Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- drivers/tty/hvc/hvc_iucv.c | 31 ++++++++++++++++++++++++------- 1 file changed, 24 insertions(+), 7 deletions(-) diff --git a/drivers/tty/hvc/hvc_iucv.c b/drivers/tty/hvc/hvc_iucv.c index ea74460f3638..f78a87b07872 100644 --- a/drivers/tty/hvc/hvc_iucv.c +++ b/drivers/tty/hvc/hvc_iucv.c @@ -1,10 +1,10 @@ /* - * hvc_iucv.c - z/VM IUCV hypervisor console (HVC) device driver + * z/VM IUCV hypervisor console (HVC) device driver * * This HVC device driver provides terminal access using * z/VM IUCV communication paths. * - * Copyright IBM Corp. 2008, 2009 + * Copyright IBM Corp. 2008, 2013 * * Author(s): Hendrik Brueckner */ @@ -102,6 +102,7 @@ static struct hvc_iucv_private *hvc_iucv_table[MAX_HVC_IUCV_LINES]; #define IUCV_HVC_CON_IDX (0) /* List of z/VM user ID filter entries (struct iucv_vmid_filter) */ #define MAX_VMID_FILTER (500) +#define FILTER_WILDCARD_CHAR '*' static size_t hvc_iucv_filter_size; static void *hvc_iucv_filter; static const char *hvc_iucv_filter_string; @@ -734,20 +735,31 @@ static void hvc_iucv_notifier_del(struct hvc_struct *hp, int id) * hvc_iucv_filter_connreq() - Filter connection request based on z/VM user ID * @ipvmid: Originating z/VM user ID (right padded with blanks) * - * Returns 0 if the z/VM user ID @ipvmid is allowed to connection, otherwise - * non-zero. + * Returns 0 if the z/VM user ID that is specified with @ipvmid is permitted to + * connect, otherwise non-zero. */ static int hvc_iucv_filter_connreq(u8 ipvmid[8]) { - size_t i; + const char *wildcard, *filter_entry; + size_t i, len; /* Note: default policy is ACCEPT if no filter is set */ if (!hvc_iucv_filter_size) return 0; - for (i = 0; i < hvc_iucv_filter_size; i++) - if (0 == memcmp(ipvmid, hvc_iucv_filter + (8 * i), 8)) + for (i = 0; i < hvc_iucv_filter_size; i++) { + filter_entry = hvc_iucv_filter + (8 * i); + + /* If a filter entry contains the filter wildcard character, + * reduce the length to match the leading portion of the user + * ID only (wildcard match). Characters following the wildcard + * are ignored. + */ + wildcard = strnchr(filter_entry, 8, FILTER_WILDCARD_CHAR); + len = (wildcard) ? wildcard - filter_entry : 8; + if (0 == memcmp(ipvmid, filter_entry, len)) return 0; + } return 1; } @@ -1166,6 +1178,7 @@ static void __init hvc_iucv_destroy(struct hvc_iucv_private *priv) /** * hvc_iucv_parse_filter() - Parse filter for a single z/VM user ID * @filter: String containing a comma-separated list of z/VM user IDs + * @dest: Location where to store the parsed z/VM user ID */ static const char *hvc_iucv_parse_filter(const char *filter, char *dest) { @@ -1188,6 +1201,10 @@ static const char *hvc_iucv_parse_filter(const char *filter, char *dest) if (filter[len - 1] == '\n') len--; + /* prohibit filter entries containing the wildcard character only */ + if (len == 1 && *filter == FILTER_WILDCARD_CHAR) + return ERR_PTR(-EINVAL); + if (len > 8) return ERR_PTR(-EINVAL); -- cgit v1.2.3-70-g09d2 From 55b5eb75e7ccdfe94b6ea1be6bba0c21149abecf Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 22 Jan 2015 11:10:39 +0100 Subject: s390/tape: remove redundant if statement The unit check handler for 3480 / 3490 tapes used to print a different warning message for erpa code 0x57 dependent on the device type. The warning messages have been remove in a cleanup, the if statement is a left over. Remove it. Reported-by: Fraser Brown Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tape_34xx.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c index 9aa79702b370..de69f0ddc321 100644 --- a/drivers/s390/char/tape_34xx.c +++ b/drivers/s390/char/tape_34xx.c @@ -773,13 +773,11 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request, "occurred\n"); return tape_34xx_erp_failed(request, -EIO); case 0x57: - if (device->cdev->id.driver_info == tape_3480) { - /* Attention intercept. */ - return tape_34xx_erp_retry(request); - } else { - /* Global status intercept. */ - return tape_34xx_erp_retry(request); - } + /* + * 3480: Attention intercept. + * 3490: Global status intercept. + */ + return tape_34xx_erp_retry(request); case 0x5a: /* * Tape length incompatible. The tape inserted is too long, -- cgit v1.2.3-70-g09d2 From 2c72a44ecdf2a7ceac73844226e97ed2d5dd1e82 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Wed, 14 Jan 2015 17:52:33 +0100 Subject: s390/spinlock: add compare-and-delay to lock wait loops Add the compare-and-delay instruction to the spin-lock and rw-lock retry loops. A CPU executing the compare-and-delay instruction stops until the lock value has changed. This is done to make the locking code for contended locks to behave better in regard to the multi- hreading facility. A thread of a core executing a compare-and-delay will allow the other threads of a core to get a larger share of the core resources. Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/setup.h | 3 +++ arch/s390/kernel/early.c | 18 +++++++++++++++ arch/s390/lib/spinlock.c | 52 +++++++++++++++++++++++++++++++++++++------ 3 files changed, 66 insertions(+), 7 deletions(-) diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index 7736fdd72595..b8d1e54b4733 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -57,6 +57,7 @@ extern void detect_memory_memblock(void); #define MACHINE_FLAG_TE (1UL << 15) #define MACHINE_FLAG_TLB_LC (1UL << 17) #define MACHINE_FLAG_VX (1UL << 18) +#define MACHINE_FLAG_CAD (1UL << 19) #define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) @@ -80,6 +81,7 @@ extern void detect_memory_memblock(void); #define MACHINE_HAS_TE (0) #define MACHINE_HAS_TLB_LC (0) #define MACHINE_HAS_VX (0) +#define MACHINE_HAS_CAD (0) #else /* CONFIG_64BIT */ #define MACHINE_HAS_IEEE (1) #define MACHINE_HAS_CSP (1) @@ -93,6 +95,7 @@ extern void detect_memory_memblock(void); #define MACHINE_HAS_TE (S390_lowcore.machine_flags & MACHINE_FLAG_TE) #define MACHINE_HAS_TLB_LC (S390_lowcore.machine_flags & MACHINE_FLAG_TLB_LC) #define MACHINE_HAS_VX (S390_lowcore.machine_flags & MACHINE_FLAG_VX) +#define MACHINE_HAS_CAD (S390_lowcore.machine_flags & MACHINE_FLAG_CAD) #endif /* CONFIG_64BIT */ /* diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index 302ac1f7f8e7..70a329450901 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -393,9 +393,27 @@ static __init void detect_machine_facilities(void) S390_lowcore.machine_flags |= MACHINE_FLAG_TLB_LC; if (test_facility(129)) S390_lowcore.machine_flags |= MACHINE_FLAG_VX; + if (test_facility(128)) + S390_lowcore.machine_flags |= MACHINE_FLAG_CAD; #endif } +static int __init nocad_setup(char *str) +{ + S390_lowcore.machine_flags &= ~MACHINE_FLAG_CAD; + return 0; +} +early_param("nocad", nocad_setup); + +static int __init cad_init(void) +{ + if (MACHINE_HAS_CAD) + /* Enable problem state CAD. */ + __ctl_set_bit(2, 3); + return 0; +} +early_initcall(cad_init); + static __init void rescue_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index 034a35a3e9c1..d6c9991f7797 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -12,7 +12,15 @@ #include #include -int spin_retry = 1000; +int spin_retry = -1; + +static int __init spin_retry_init(void) +{ + if (spin_retry < 0) + spin_retry = MACHINE_HAS_CAD ? 10 : 1000; + return 0; +} +early_initcall(spin_retry_init); /** * spin_retry= parameter @@ -24,6 +32,11 @@ static int __init spin_retry_setup(char *str) } __setup("spin_retry=", spin_retry_setup); +static inline void _raw_compare_and_delay(unsigned int *lock, unsigned int old) +{ + asm(".insn rsy,0xeb0000000022,%0,0,%1" : : "d" (old), "Q" (*lock)); +} + void arch_spin_lock_wait(arch_spinlock_t *lp) { unsigned int cpu = SPINLOCK_LOCKVAL; @@ -46,6 +59,8 @@ void arch_spin_lock_wait(arch_spinlock_t *lp) /* Loop for a while on the lock value. */ count = spin_retry; do { + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&lp->lock, owner); owner = ACCESS_ONCE(lp->lock); } while (owner && count-- > 0); if (!owner) @@ -84,6 +99,8 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags) /* Loop for a while on the lock value. */ count = spin_retry; do { + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&lp->lock, owner); owner = ACCESS_ONCE(lp->lock); } while (owner && count-- > 0); if (!owner) @@ -100,11 +117,19 @@ EXPORT_SYMBOL(arch_spin_lock_wait_flags); int arch_spin_trylock_retry(arch_spinlock_t *lp) { + unsigned int cpu = SPINLOCK_LOCKVAL; + unsigned int owner; int count; - for (count = spin_retry; count > 0; count--) - if (arch_spin_trylock_once(lp)) - return 1; + for (count = spin_retry; count > 0; count--) { + owner = ACCESS_ONCE(lp->lock); + /* Try to get the lock if it is free. */ + if (!owner) { + if (_raw_compare_and_swap(&lp->lock, 0, cpu)) + return 1; + } else if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&lp->lock, owner); + } return 0; } EXPORT_SYMBOL(arch_spin_trylock_retry); @@ -126,8 +151,11 @@ void _raw_read_lock_wait(arch_rwlock_t *rw) } old = ACCESS_ONCE(rw->lock); owner = ACCESS_ONCE(rw->owner); - if ((int) old < 0) + if ((int) old < 0) { + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&rw->lock, old); continue; + } if (_raw_compare_and_swap(&rw->lock, old, old + 1)) return; } @@ -141,8 +169,11 @@ int _raw_read_trylock_retry(arch_rwlock_t *rw) while (count-- > 0) { old = ACCESS_ONCE(rw->lock); - if ((int) old < 0) + if ((int) old < 0) { + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&rw->lock, old); continue; + } if (_raw_compare_and_swap(&rw->lock, old, old + 1)) return 1; } @@ -173,6 +204,8 @@ void _raw_write_lock_wait(arch_rwlock_t *rw, unsigned int prev) } if ((old & 0x7fffffff) == 0 && (int) prev >= 0) break; + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&rw->lock, old); } } EXPORT_SYMBOL(_raw_write_lock_wait); @@ -201,6 +234,8 @@ void _raw_write_lock_wait(arch_rwlock_t *rw) smp_rmb(); if ((old & 0x7fffffff) == 0 && (int) prev >= 0) break; + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&rw->lock, old); } } EXPORT_SYMBOL(_raw_write_lock_wait); @@ -214,8 +249,11 @@ int _raw_write_trylock_retry(arch_rwlock_t *rw) while (count-- > 0) { old = ACCESS_ONCE(rw->lock); - if (old) + if (old) { + if (MACHINE_HAS_CAD) + _raw_compare_and_delay(&rw->lock, old); continue; + } if (_raw_compare_and_swap(&rw->lock, 0, 0x80000000)) return 1; } -- cgit v1.2.3-70-g09d2 From 5bc334bff9a6e189113140ed6dce0ce61d768943 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Fri, 23 Jan 2015 13:27:04 +0100 Subject: s390/zcrypt: Number of supported ap domains is not retrievable. Upcoming versions of secure key management facilities (CCA and EP11) require information about the maximum number of supported ap domains in order to service TKE requests properly. With IBM z13 the number of available domains (so far 16) has increased up to 85. This number varies depending on machine types and models. Therefore the new sysfs attribute 'ap_max_domain_id' provides this limit of supported ap domains. Upcoming releases for CCA and EP11 will use this new information. Without this problem fix it is not possible to retrieve reliable information about the maximum number of supported ap domains. Thus, customers are not able to perform key management for CCA and EP11 coprocessor adapters. Signed-off-by: Ingo Tuchscherer Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 137 ++++++++++++++++++++++++++++++------------- 1 file changed, 96 insertions(+), 41 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index 4d41bf75c233..faa058016b5c 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -203,6 +203,24 @@ ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type) return reg1; } +/** + * ap_query_facilities(): PQAP(TAPQ) query facilities. + * @qid: The AP queue number + * + * Returns content of general register 2 after the PQAP(TAPQ) + * instruction was called. + */ +static inline unsigned long ap_query_facilities(ap_qid_t qid) +{ + register unsigned long reg0 asm ("0") = qid | 0x00800000UL; + register unsigned long reg1 asm ("1"); + register unsigned long reg2 asm ("2") = 0UL; + + asm volatile(".long 0xb2af0000" /* PQAP(TAPQ) */ + : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc"); + return reg2; +} + /** * ap_reset_queue(): Reset adjunct processor queue. * @qid: The AP queue number @@ -1006,6 +1024,47 @@ void ap_bus_force_rescan(void) } EXPORT_SYMBOL(ap_bus_force_rescan); +/* + * ap_test_config(): helper function to extract the nrth bit + * within the unsigned int array field. + */ +static inline int ap_test_config(unsigned int *field, unsigned int nr) +{ + if (nr > 0xFFu) + return 0; + return ap_test_bit((field + (nr >> 5)), (nr & 0x1f)); +} + +/* + * ap_test_config_card_id(): Test, whether an AP card ID is configured. + * @id AP card ID + * + * Returns 0 if the card is not configured + * 1 if the card is configured or + * if the configuration information is not available + */ +static inline int ap_test_config_card_id(unsigned int id) +{ + if (!ap_configuration) + return 1; + return ap_test_config(ap_configuration->apm, id); +} + +/* + * ap_test_config_domain(): Test, whether an AP usage domain is configured. + * @domain AP usage domain ID + * + * Returns 0 if the usage domain is not configured + * 1 if the usage domain is configured or + * if the configuration information is not available + */ +static inline int ap_test_config_domain(unsigned int domain) +{ + if (!ap_configuration) + return 1; + return ap_test_config(ap_configuration->aqm, domain); +} + /* * AP bus attributes. */ @@ -1121,6 +1180,42 @@ static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf, static BUS_ATTR(poll_timeout, 0644, poll_timeout_show, poll_timeout_store); +static ssize_t ap_max_domain_id_show(struct bus_type *bus, char *buf) +{ + ap_qid_t qid; + int i, nd, max_domain_id = -1; + unsigned long fbits; + + if (ap_configuration) { + if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS) { + for (i = 0; i < AP_DEVICES; i++) { + if (!ap_test_config_card_id(i)) + continue; + qid = AP_MKQID(i, ap_domain_index); + fbits = ap_query_facilities(qid); + if (fbits & (1UL << 57)) { + /* the N bit is 0, Nd field is filled */ + nd = (int)((fbits & 0x00FF0000UL)>>16); + if (nd > 0) + max_domain_id = nd; + else + max_domain_id = 15; + } else { + /* N bit is 1, max 16 domains */ + max_domain_id = 15; + } + break; + } + } + } else { + /* no APXA support, older machines with max 16 domains */ + max_domain_id = 15; + } + return snprintf(buf, PAGE_SIZE, "%d\n", max_domain_id); +} + +static BUS_ATTR(ap_max_domain_id, 0444, ap_max_domain_id_show, NULL); + static struct bus_attribute *const ap_bus_attrs[] = { &bus_attr_ap_domain, &bus_attr_ap_control_domain_mask, @@ -1128,50 +1223,10 @@ static struct bus_attribute *const ap_bus_attrs[] = { &bus_attr_poll_thread, &bus_attr_ap_interrupts, &bus_attr_poll_timeout, + &bus_attr_ap_max_domain_id, NULL, }; -static inline int ap_test_config(unsigned int *field, unsigned int nr) -{ - if (nr > 0xFFu) - return 0; - return ap_test_bit((field + (nr >> 5)), (nr & 0x1f)); -} - -/* - * ap_test_config_card_id(): Test, whether an AP card ID is configured. - * @id AP card ID - * - * Returns 0 if the card is not configured - * 1 if the card is configured or - * if the configuration information is not available - */ -static inline int ap_test_config_card_id(unsigned int id) -{ - if (!ap_configuration) - return 1; - return ap_test_config(ap_configuration->apm, id); -} - -/* - * ap_test_config_domain(): Test, whether an AP usage domain is configured. - * @domain AP usage domain ID - * - * Returns 0 if the usage domain is not configured - * 1 if the usage domain is configured or - * if the configuration information is not available - */ -static inline int ap_test_config_domain(unsigned int domain) -{ - if (!ap_configuration) /* QCI not supported */ - if (domain < 16) - return 1; /* then domains 0...15 are configured */ - else - return 0; - else - return ap_test_config(ap_configuration->aqm, domain); -} - /** * ap_query_configuration(): Query AP configuration information. * -- cgit v1.2.3-70-g09d2 From bdea1f1bb273383312f0eca56241794b06ed4205 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Fri, 23 Jan 2015 14:56:25 +0100 Subject: s390/zcrypt: Add support for new crypto express (CEX5S) adapter. Extends the generic cryptographic device driver (zcrypt) to support the Crypto Express 5S adapter. Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 3 --- drivers/s390/crypto/ap_bus.h | 1 + drivers/s390/crypto/zcrypt_api.h | 1 + drivers/s390/crypto/zcrypt_cex4.c | 33 +++++++++++++++++++++++++++------ 4 files changed, 29 insertions(+), 9 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index faa058016b5c..a60fc2f9f4b2 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1489,9 +1489,6 @@ static void ap_scan_bus(struct work_struct *unused) continue; } break; - case 11: - ap_dev->device_type = 10; - break; default: ap_dev->device_type = device_type; } diff --git a/drivers/s390/crypto/ap_bus.h b/drivers/s390/crypto/ap_bus.h index 055a0f956d17..2737d261a324 100644 --- a/drivers/s390/crypto/ap_bus.h +++ b/drivers/s390/crypto/ap_bus.h @@ -117,6 +117,7 @@ static inline int ap_test_bit(unsigned int *ptr, unsigned int nr) #define AP_DEVICE_TYPE_CEX3A 8 #define AP_DEVICE_TYPE_CEX3C 9 #define AP_DEVICE_TYPE_CEX4 10 +#define AP_DEVICE_TYPE_CEX5 11 /* * Known function facilities diff --git a/drivers/s390/crypto/zcrypt_api.h b/drivers/s390/crypto/zcrypt_api.h index b3d496bfaa7e..750876891931 100644 --- a/drivers/s390/crypto/zcrypt_api.h +++ b/drivers/s390/crypto/zcrypt_api.h @@ -75,6 +75,7 @@ struct ica_z90_status { #define ZCRYPT_CEX3C 7 #define ZCRYPT_CEX3A 8 #define ZCRYPT_CEX4 10 +#define ZCRYPT_CEX5 11 /** * Large random numbers are pulled in 4096 byte chunks from the crypto cards diff --git a/drivers/s390/crypto/zcrypt_cex4.c b/drivers/s390/crypto/zcrypt_cex4.c index 569f8b1d86c0..71e698b85772 100644 --- a/drivers/s390/crypto/zcrypt_cex4.c +++ b/drivers/s390/crypto/zcrypt_cex4.c @@ -26,6 +26,10 @@ #define CEX4A_SPEED_RATING 900 /* TODO new card, new speed rating */ #define CEX4C_SPEED_RATING 6500 /* TODO new card, new speed rating */ +#define CEX4P_SPEED_RATING 7000 /* TODO new card, new speed rating */ +#define CEX5A_SPEED_RATING 450 /* TODO new card, new speed rating */ +#define CEX5C_SPEED_RATING 3250 /* TODO new card, new speed rating */ +#define CEX5P_SPEED_RATING 3500 /* TODO new card, new speed rating */ #define CEX4A_MAX_MESSAGE_SIZE MSGTYPE50_CRB3_MAX_MSG_SIZE #define CEX4C_MAX_MESSAGE_SIZE MSGTYPE06_MAX_MSG_SIZE @@ -39,6 +43,7 @@ static struct ap_device_id zcrypt_cex4_ids[] = { { AP_DEVICE(AP_DEVICE_TYPE_CEX4) }, + { AP_DEVICE(AP_DEVICE_TYPE_CEX5) }, { /* end of list */ }, }; @@ -70,11 +75,18 @@ static int zcrypt_cex4_probe(struct ap_device *ap_dev) switch (ap_dev->device_type) { case AP_DEVICE_TYPE_CEX4: + case AP_DEVICE_TYPE_CEX5: if (ap_test_bit(&ap_dev->functions, AP_FUNC_ACCEL)) { zdev = zcrypt_device_alloc(CEX4A_MAX_MESSAGE_SIZE); if (!zdev) return -ENOMEM; - zdev->type_string = "CEX4A"; + if (ap_dev->device_type == AP_DEVICE_TYPE_CEX4) { + zdev->type_string = "CEX4A"; + zdev->speed_rating = CEX4A_SPEED_RATING; + } else { + zdev->type_string = "CEX5A"; + zdev->speed_rating = CEX5A_SPEED_RATING; + } zdev->user_space_type = ZCRYPT_CEX3A; zdev->min_mod_size = CEX4A_MIN_MOD_SIZE; if (ap_test_bit(&ap_dev->functions, AP_FUNC_MEX4K) && @@ -90,33 +102,42 @@ static int zcrypt_cex4_probe(struct ap_device *ap_dev) CEX4A_MAX_MOD_SIZE_2K; } zdev->short_crt = 1; - zdev->speed_rating = CEX4A_SPEED_RATING; zdev->ops = zcrypt_msgtype_request(MSGTYPE50_NAME, MSGTYPE50_VARIANT_DEFAULT); } else if (ap_test_bit(&ap_dev->functions, AP_FUNC_COPRO)) { zdev = zcrypt_device_alloc(CEX4C_MAX_MESSAGE_SIZE); if (!zdev) return -ENOMEM; - zdev->type_string = "CEX4C"; + if (ap_dev->device_type == AP_DEVICE_TYPE_CEX4) { + zdev->type_string = "CEX4C"; + zdev->speed_rating = CEX4C_SPEED_RATING; + } else { + zdev->type_string = "CEX5C"; + zdev->speed_rating = CEX5C_SPEED_RATING; + } zdev->user_space_type = ZCRYPT_CEX3C; zdev->min_mod_size = CEX4C_MIN_MOD_SIZE; zdev->max_mod_size = CEX4C_MAX_MOD_SIZE; zdev->max_exp_bit_length = CEX4C_MAX_MOD_SIZE; zdev->short_crt = 0; - zdev->speed_rating = CEX4C_SPEED_RATING; zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME, MSGTYPE06_VARIANT_DEFAULT); } else if (ap_test_bit(&ap_dev->functions, AP_FUNC_EP11)) { zdev = zcrypt_device_alloc(CEX4C_MAX_MESSAGE_SIZE); if (!zdev) return -ENOMEM; - zdev->type_string = "CEX4P"; + if (ap_dev->device_type == AP_DEVICE_TYPE_CEX4) { + zdev->type_string = "CEX4P"; + zdev->speed_rating = CEX4P_SPEED_RATING; + } else { + zdev->type_string = "CEX5P"; + zdev->speed_rating = CEX5P_SPEED_RATING; + } zdev->user_space_type = ZCRYPT_CEX4; zdev->min_mod_size = CEX4C_MIN_MOD_SIZE; zdev->max_mod_size = CEX4C_MAX_MOD_SIZE; zdev->max_exp_bit_length = CEX4C_MAX_MOD_SIZE; zdev->short_crt = 0; - zdev->speed_rating = CEX4C_SPEED_RATING; zdev->ops = zcrypt_msgtype_request(MSGTYPE06_NAME, MSGTYPE06_VARIANT_EP11); } -- cgit v1.2.3-70-g09d2 From 4d92f50249eb3ed1c066276e214e8cc7be81e96d Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 28 Jan 2015 07:43:56 +0100 Subject: s390: reintroduce diag 44 calls for cpu_relax() Christian Borntraeger reported that the now missing diag 44 calls (voluntary time slice end) does cause a performance regression for stop_machine() calls if a machine has more virtual cpus than the host has physical cpus. This patch mainly reverts 57f2ffe14fd125c2 ("s390: remove diag 44 calls from cpu_relax()") with the exception that we still do not issue diag 44 calls if running with smt enabled. Due to group scheduling algorithms when running in LPAR this would lead to significant latencies. However, when running in LPAR we do not have more virtual than physical cpus. Reported-and-tested-by: Christian Borntraeger Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/processor.h | 5 +---- arch/s390/kernel/processor.c | 10 +++++++++- 2 files changed, 10 insertions(+), 5 deletions(-) diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index bed05ea7ec27..e7cbbdcdee13 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -215,10 +215,7 @@ static inline unsigned short stap(void) /* * Give up the time slice of the virtual PU. */ -static inline void cpu_relax(void) -{ - barrier(); -} +void cpu_relax(void); #define cpu_relax_lowlatency() barrier() diff --git a/arch/s390/kernel/processor.c b/arch/s390/kernel/processor.c index dbdd33ee0102..26108232fcaa 100644 --- a/arch/s390/kernel/processor.c +++ b/arch/s390/kernel/processor.c @@ -8,16 +8,24 @@ #include #include -#include #include #include #include #include #include #include +#include static DEFINE_PER_CPU(struct cpuid, cpu_id); +void cpu_relax(void) +{ + if (!smp_cpu_mtid && MACHINE_HAS_DIAG44) + asm volatile("diag 0,0,0x44"); + barrier(); +} +EXPORT_SYMBOL(cpu_relax); + /* * cpu_init - initializes state that is per-CPU. */ -- cgit v1.2.3-70-g09d2 From c0a80c0c27e5e65b180a25e6c4c2f7ef9e386cd3 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 9 Jan 2015 13:06:33 +0100 Subject: ftrace: allow architectures to specify ftrace compile options If the kernel is compiled with function tracer support the -pg compile option is passed to gcc to generate extra code into the prologue of each function. This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE makefile variable which architectures can override if a different option should be used for code generation. Acked-by: Steven Rostedt Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- Makefile | 6 +++++- kernel/Makefile | 4 ++-- kernel/events/Makefile | 2 +- kernel/locking/Makefile | 8 ++++---- kernel/sched/Makefile | 2 +- kernel/trace/Makefile | 4 ++-- lib/Makefile | 2 +- scripts/Makefile.build | 5 +++-- 8 files changed, 19 insertions(+), 14 deletions(-) diff --git a/Makefile b/Makefile index fd80c6e9bc23..11c6fe8f708f 100644 --- a/Makefile +++ b/Makefile @@ -724,10 +724,14 @@ KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ endif ifdef CONFIG_FUNCTION_TRACER +ifndef CC_FLAGS_FTRACE +CC_FLAGS_FTRACE := -pg +endif +export CC_FLAGS_FTRACE ifdef CONFIG_HAVE_FENTRY CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) endif -KBUILD_CFLAGS += -pg $(CC_USING_FENTRY) +KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY) KBUILD_AFLAGS += $(CC_USING_FENTRY) ifdef CONFIG_DYNAMIC_FTRACE ifdef CONFIG_HAVE_C_RECORDMCOUNT diff --git a/kernel/Makefile b/kernel/Makefile index a59481a3fa6c..13af308f2460 100644 --- a/kernel/Makefile +++ b/kernel/Makefile @@ -13,8 +13,8 @@ obj-y = fork.o exec_domain.o panic.o \ ifdef CONFIG_FUNCTION_TRACER # Do not trace debug files and internal ftrace files -CFLAGS_REMOVE_cgroup-debug.o = -pg -CFLAGS_REMOVE_irq_work.o = -pg +CFLAGS_REMOVE_cgroup-debug.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_irq_work.o = $(CC_FLAGS_FTRACE) endif # cond_syscall is currently not LTO compatible diff --git a/kernel/events/Makefile b/kernel/events/Makefile index 103f5d147b2f..2925188f50ea 100644 --- a/kernel/events/Makefile +++ b/kernel/events/Makefile @@ -1,5 +1,5 @@ ifdef CONFIG_FUNCTION_TRACER -CFLAGS_REMOVE_core.o = -pg +CFLAGS_REMOVE_core.o = $(CC_FLAGS_FTRACE) endif obj-y := core.o ring_buffer.o callchain.o diff --git a/kernel/locking/Makefile b/kernel/locking/Makefile index 8541bfdfd232..4caca3f7af53 100644 --- a/kernel/locking/Makefile +++ b/kernel/locking/Makefile @@ -2,10 +2,10 @@ obj-y += mutex.o semaphore.o rwsem.o mcs_spinlock.o ifdef CONFIG_FUNCTION_TRACER -CFLAGS_REMOVE_lockdep.o = -pg -CFLAGS_REMOVE_lockdep_proc.o = -pg -CFLAGS_REMOVE_mutex-debug.o = -pg -CFLAGS_REMOVE_rtmutex-debug.o = -pg +CFLAGS_REMOVE_lockdep.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_lockdep_proc.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_mutex-debug.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_rtmutex-debug.o = $(CC_FLAGS_FTRACE) endif obj-$(CONFIG_DEBUG_MUTEXES) += mutex-debug.o diff --git a/kernel/sched/Makefile b/kernel/sched/Makefile index ab32b7b0db5c..46be87024875 100644 --- a/kernel/sched/Makefile +++ b/kernel/sched/Makefile @@ -1,5 +1,5 @@ ifdef CONFIG_FUNCTION_TRACER -CFLAGS_REMOVE_clock.o = -pg +CFLAGS_REMOVE_clock.o = $(CC_FLAGS_FTRACE) endif ifneq ($(CONFIG_SCHED_OMIT_FRAME_POINTER),y) diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile index 67d6369ddf83..9a7e0e60a1a8 100644 --- a/kernel/trace/Makefile +++ b/kernel/trace/Makefile @@ -3,11 +3,11 @@ ifdef CONFIG_FUNCTION_TRACER ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) +KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS)) ifdef CONFIG_FTRACE_SELFTEST # selftest needs instrumentation -CFLAGS_trace_selftest_dynamic.o = -pg +CFLAGS_trace_selftest_dynamic.o = $(CC_FLAGS_FTRACE) obj-y += trace_selftest_dynamic.o endif endif diff --git a/lib/Makefile b/lib/Makefile index 3c3b30b9e020..f3f73e50519a 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -4,7 +4,7 @@ ifdef CONFIG_FUNCTION_TRACER ORIG_CFLAGS := $(KBUILD_CFLAGS) -KBUILD_CFLAGS = $(subst -pg,,$(ORIG_CFLAGS)) +KBUILD_CFLAGS = $(subst $(CC_FLAGS_FTRACE),,$(ORIG_CFLAGS)) endif lib-y := ctype.o string.o vsprintf.o cmdline.o \ diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 649ce6844033..01df30af4d4a 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -234,8 +234,9 @@ sub_cmd_record_mcount = set -e ; perl $(srctree)/scripts/recordmcount.pl "$(ARCH "$(if $(part-of-module),1,0)" "$(@)"; recordmcount_source := $(srctree)/scripts/recordmcount.pl endif -cmd_record_mcount = \ - if [ "$(findstring -pg,$(_c_flags))" = "-pg" ]; then \ +cmd_record_mcount = \ + if [ "$(findstring $(CC_FLAGS_FTRACE),$(_c_flags))" = \ + "$(CC_FLAGS_FTRACE)" ]; then \ $(sub_cmd_record_mcount) \ fi; endif -- cgit v1.2.3-70-g09d2 From 61f552141c9c0e88b3fdc7046265781ffd8fa68a Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Sun, 18 Jan 2015 16:45:42 +0100 Subject: ftrace: let notrace function attribute disable hotpatching if necessary gcc supports an s390 specific function attribute called "hotpatch". It can be used to specify the number of halfwords that shall be added before and after a function and which shall be filled with nops for runtime patching. s390 will use the hotpatch attribute for function tracing, therefore make sure that the notrace function attribute either disables the mcount call or in case of hotpatch nop generation. Acked-by: Steven Rostedt Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- include/linux/compiler.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index d5ad7b1118fc..1ef679f4b88e 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -54,7 +54,11 @@ extern void __chk_io_ptr(const volatile void __iomem *); #include #endif +#ifdef CC_USING_HOTPATCH +#define notrace __attribute__((hotpatch(0,0))) +#else #define notrace __attribute__((no_instrument_function)) +#endif /* Intel compiler defines __GNUC__. So we will overwrite implementations * coming from above header files here -- cgit v1.2.3-70-g09d2 From e6d60b368b45b9be3aa068f8e5fa98c3487c9d4e Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 9 Jan 2015 13:08:28 +0100 Subject: s390/ftrace: hotpatch support for function tracing Make use of gcc's hotpatch support to generate better code for ftrace function tracing. The generated code now contains only a six byte nop in each function prologue instead of a 24 byte code block which will be runtime patched to support function tracing. With the new code generation the runtime overhead for supporting function tracing is close to zero, while the original code did show a significant performance impact. Acked-by: Steven Rostedt Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 1 - arch/s390/Makefile | 10 ++++++++++ arch/s390/include/asm/ftrace.h | 15 +++++++++++++++ arch/s390/kernel/Makefile | 4 ++-- arch/s390/kernel/ftrace.c | 15 ++++++++++++++- arch/s390/kernel/kprobes.c | 3 ++- arch/s390/kernel/mcount.S | 2 ++ scripts/recordmcount.pl | 9 +++++++-- 8 files changed, 52 insertions(+), 7 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 7eba5b5723e9..8d11babf9aa5 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -117,7 +117,6 @@ config S390 select HAVE_BPF_JIT if 64BIT && PACK_STACK select HAVE_CMPXCHG_DOUBLE select HAVE_CMPXCHG_LOCAL - select HAVE_C_RECORDMCOUNT select HAVE_DEBUG_KMEMLEAK select HAVE_DYNAMIC_FTRACE if 64BIT select HAVE_DYNAMIC_FTRACE_WITH_REGS if 64BIT diff --git a/arch/s390/Makefile b/arch/s390/Makefile index e742ec5de9a7..acb6859c6a95 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -87,6 +87,16 @@ ifeq ($(call cc-option-yn,-mwarn-dynamicstack),y) cflags-$(CONFIG_WARN_DYNAMIC_STACK) += -mwarn-dynamicstack endif +ifdef CONFIG_FUNCTION_TRACER +# make use of hotpatch feature if the compiler supports it +cc_hotpatch := -mhotpatch=0,3 +ifeq ($(call cc-option-yn,$(cc_hotpatch)),y) +CC_FLAGS_FTRACE := $(cc_hotpatch) +KBUILD_AFLAGS += -DCC_USING_HOTPATCH +KBUILD_CFLAGS += -DCC_USING_HOTPATCH +endif +endif + KBUILD_CFLAGS += -mbackchain -msoft-float $(cflags-y) KBUILD_CFLAGS += -pipe -fno-strength-reduce -Wno-sign-compare KBUILD_AFLAGS += $(aflags-y) diff --git a/arch/s390/include/asm/ftrace.h b/arch/s390/include/asm/ftrace.h index abb618f1ead2..836c56290499 100644 --- a/arch/s390/include/asm/ftrace.h +++ b/arch/s390/include/asm/ftrace.h @@ -3,8 +3,12 @@ #define ARCH_SUPPORTS_FTRACE_OPS 1 +#ifdef CC_USING_HOTPATCH +#define MCOUNT_INSN_SIZE 6 +#else #define MCOUNT_INSN_SIZE 24 #define MCOUNT_RETURN_FIXUP 18 +#endif #ifndef __ASSEMBLY__ @@ -37,17 +41,28 @@ struct ftrace_insn { static inline void ftrace_generate_nop_insn(struct ftrace_insn *insn) { #ifdef CONFIG_FUNCTION_TRACER +#ifdef CC_USING_HOTPATCH + /* brcl 0,0 */ + insn->opc = 0xc004; + insn->disp = 0; +#else /* jg .+24 */ insn->opc = 0xc0f4; insn->disp = MCOUNT_INSN_SIZE / 2; #endif +#endif } static inline int is_ftrace_nop(struct ftrace_insn *insn) { #ifdef CONFIG_FUNCTION_TRACER +#ifdef CC_USING_HOTPATCH + if (insn->disp == 0) + return 1; +#else if (insn->disp == MCOUNT_INSN_SIZE / 2) return 1; +#endif #endif return 0; } diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 204c43a4c245..31fab2676fe9 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -4,8 +4,8 @@ ifdef CONFIG_FUNCTION_TRACER # Don't trace early setup code and tracing code -CFLAGS_REMOVE_early.o = -pg -CFLAGS_REMOVE_ftrace.o = -pg +CFLAGS_REMOVE_early.o = $(CC_FLAGS_FTRACE) +CFLAGS_REMOVE_ftrace.o = $(CC_FLAGS_FTRACE) endif # diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 3dabcae40e04..82c19899574f 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -46,6 +46,13 @@ * lg %r14,8(%r15) # offset 18 * The jg instruction branches to offset 24 to skip as many instructions * as possible. + * In case we use gcc's hotpatch feature the original and also the disabled + * function prologue contains only a single six byte instruction and looks + * like this: + * > brcl 0,0 # offset 0 + * To enable ftrace the code gets patched like above and afterwards looks + * like this: + * > brasl %r0,ftrace_caller # offset 0 */ unsigned long ftrace_plt; @@ -64,9 +71,15 @@ int ftrace_make_nop(struct module *mod, struct dyn_ftrace *rec, if (probe_kernel_read(&old, (void *) rec->ip, sizeof(old))) return -EFAULT; if (addr == MCOUNT_ADDR) { - /* Initial code replacement; we expect to see stg r14,8(r15) */ + /* Initial code replacement */ +#ifdef CC_USING_HOTPATCH + /* We expect to see brcl 0,0 */ + ftrace_generate_nop_insn(&orig); +#else + /* We expect to see stg r14,8(r15) */ orig.opc = 0xe3e0; orig.disp = 0xf0080024; +#endif ftrace_generate_nop_insn(&new); } else if (old.opc == BREAKPOINT_INSTRUCTION) { /* diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 1e4c710dfb92..f516edc1fbe3 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -69,7 +69,8 @@ static void copy_instruction(struct kprobe *p) /* * If kprobes patches the instruction that is morphed by * ftrace make sure that kprobes always sees the branch - * "jg .+24" that skips the mcount block + * "jg .+24" that skips the mcount block or the "brcl 0,0" + * in case of hotpatch. */ ftrace_generate_nop_insn((struct ftrace_insn *)p->ainsn.insn); p->ainsn.is_ftrace_insn = 1; diff --git a/arch/s390/kernel/mcount.S b/arch/s390/kernel/mcount.S index b6dfc5bfcb89..e499370fbccb 100644 --- a/arch/s390/kernel/mcount.S +++ b/arch/s390/kernel/mcount.S @@ -27,7 +27,9 @@ ENTRY(ftrace_caller) .globl ftrace_regs_caller .set ftrace_regs_caller,ftrace_caller lgr %r1,%r15 +#ifndef CC_USING_HOTPATCH aghi %r0,MCOUNT_RETURN_FIXUP +#endif aghi %r15,-STACK_FRAME_SIZE stg %r1,__SF_BACKCHAIN(%r15) stg %r1,(STACK_PTREGS_GPRS+15*8)(%r15) diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 56ea99a12ab7..be39be0abefc 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -242,8 +242,13 @@ if ($arch eq "x86_64") { $cc .= " -m32"; } elsif ($arch eq "s390" && $bits == 64) { - $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$"; - $mcount_adjust = -14; + if ($cc =~ /-DCC_USING_HOTPATCH/) { + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*c0 04 00 00 00 00\\s*brcl\\s*0,[0-9a-f]+ <([^\+]*)>\$"; + $mcount_adjust = 0; + } else { + $mcount_regex = "^\\s*([0-9a-fA-F]+):\\s*R_390_(PC|PLT)32DBL\\s+_mcount\\+0x2\$"; + $mcount_adjust = -14; + } $alignment = 8; $type = ".quad"; $ld .= " -m elf64_s390"; -- cgit v1.2.3-70-g09d2 From 8ea55c95c372a7a51fa50cb7c75240bfbe8bd337 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 28 Jan 2015 18:44:17 +0100 Subject: s390/dasd: add locking for global_profile access Access to DASDs global statistics is done without locking which can lead to inconsistent data. Add locking to fix this. Also move the relevant structs in a global dasd_profile struct. Signed-off-by: Sebastian Ott Reviewed-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 32 ++++++++++++++++++++------------ drivers/s390/block/dasd_int.h | 2 +- drivers/s390/block/dasd_proc.c | 4 +++- 3 files changed, 24 insertions(+), 14 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 4abf11965484..a67e8dae73c3 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -674,8 +674,12 @@ EXPORT_SYMBOL(dasd_enable_device); unsigned int dasd_global_profile_level = DASD_PROFILE_OFF; #ifdef CONFIG_DASD_PROFILE -struct dasd_profile_info dasd_global_profile_data; -static struct dentry *dasd_global_profile_dentry; +static struct dasd_profile_info dasd_global_profile_data; +struct dasd_profile dasd_global_profile = { + .dentry = NULL, + .data = &dasd_global_profile_data, + .lock = __SPIN_LOCK_UNLOCKED(dasd_global_profile.lock), +}; static struct dentry *dasd_debugfs_global_entry; /* @@ -696,11 +700,13 @@ static void dasd_profile_start(struct dasd_block *block, if (++counter >= 31) break; + spin_lock(&dasd_global_profile.lock); if (dasd_global_profile_level) { - dasd_global_profile_data.dasd_io_nr_req[counter]++; + dasd_global_profile.data->dasd_io_nr_req[counter]++; if (rq_data_dir(req) == READ) - dasd_global_profile_data.dasd_read_nr_req[counter]++; + dasd_global_profile.data->dasd_read_nr_req[counter]++; } + spin_unlock(&dasd_global_profile.lock); spin_lock(&block->profile.lock); if (block->profile.data) { @@ -825,8 +831,9 @@ static void dasd_profile_end(struct dasd_block *block, dasd_profile_counter(irqtime / sectors, irqtimeps_ind); dasd_profile_counter(endtime, endtime_ind); + spin_lock(&dasd_global_profile.lock); if (dasd_global_profile_level) { - dasd_profile_end_add_data(&dasd_global_profile_data, + dasd_profile_end_add_data(dasd_global_profile.data, cqr->startdev != block->base, cqr->cpmode == 1, rq_data_dir(req) == READ, @@ -835,6 +842,7 @@ static void dasd_profile_end(struct dasd_block *block, irqtime_ind, irqtimeps_ind, endtime_ind); } + spin_unlock(&dasd_global_profile.lock); spin_lock(&block->profile.lock); if (block->profile.data) @@ -878,8 +886,7 @@ void dasd_profile_reset(struct dasd_profile *profile) void dasd_global_profile_reset(void) { - memset(&dasd_global_profile_data, 0, sizeof(dasd_global_profile_data)); - getnstimeofday(&dasd_global_profile_data.starttod); + dasd_profile_reset(&dasd_global_profile); } int dasd_profile_on(struct dasd_profile *profile) @@ -1077,7 +1084,9 @@ static int dasd_stats_global_show(struct seq_file *m, void *v) seq_puts(m, "disabled\n"); return 0; } - dasd_stats_seq_print(m, &dasd_global_profile_data); + spin_lock_bh(&dasd_global_profile.lock); + dasd_stats_seq_print(m, dasd_global_profile.data); + spin_unlock_bh(&dasd_global_profile.lock); return 0; } @@ -1123,8 +1132,8 @@ static void dasd_profile_exit(struct dasd_profile *profile) static void dasd_statistics_removeroot(void) { dasd_global_profile_level = DASD_PROFILE_OFF; - debugfs_remove(dasd_global_profile_dentry); - dasd_global_profile_dentry = NULL; + debugfs_remove(dasd_global_profile.dentry); + dasd_global_profile.dentry = NULL; debugfs_remove(dasd_debugfs_global_entry); debugfs_remove(dasd_debugfs_root_entry); } @@ -1136,7 +1145,6 @@ static void dasd_statistics_createroot(void) dasd_debugfs_root_entry = NULL; dasd_debugfs_global_entry = NULL; - dasd_global_profile_dentry = NULL; pde = debugfs_create_dir("dasd", NULL); if (!pde || IS_ERR(pde)) goto error; @@ -1151,7 +1159,7 @@ static void dasd_statistics_createroot(void) NULL, &dasd_stats_global_fops); if (!pde || IS_ERR(pde)) goto error; - dasd_global_profile_dentry = pde; + dasd_global_profile.dentry = pde; return; error: diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 8b5d4100abf7..91731fa05604 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -651,7 +651,7 @@ dasd_check_blocksize(int bsize) #define DASD_PROFILE_GLOBAL_ONLY 2 extern debug_info_t *dasd_debug_area; -extern struct dasd_profile_info dasd_global_profile_data; +extern struct dasd_profile dasd_global_profile; extern unsigned int dasd_global_profile_level; extern const struct block_device_operations dasd_device_operations; diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 78ac905a5b7f..76410084c48f 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -219,7 +219,8 @@ static int dasd_stats_proc_show(struct seq_file *m, void *v) "/proc/dasd/statistics'\n"); return 0; } - prof = &dasd_global_profile_data; + spin_lock_bh(&dasd_global_profile.lock); + prof = dasd_global_profile.data; /* prevent counter 'overflow' on output */ for (factor = 1; (prof->dasd_io_reqs / factor) > 9999999; @@ -255,6 +256,7 @@ static int dasd_stats_proc_show(struct seq_file *m, void *v) dasd_statistics_array(m, prof->dasd_io_time3, factor); seq_printf(m, "# of req in chanq at enqueuing (1..32) \n"); dasd_statistics_array(m, prof->dasd_io_nr_req, factor); + spin_unlock_bh(&dasd_global_profile.lock); #else seq_printf(m, "Statistics are not activated in this kernel\n"); #endif -- cgit v1.2.3-70-g09d2 From 6765cc2ac60f124ffffd0232e095c5ec6eb70d57 Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 28 Jan 2015 19:06:29 +0100 Subject: s390/dasd: cleanup profiling The dasd driver has a lot of duplicated code to handle dasd_global_profile. With this patch we use the same code for the global and the per device profiling data. Note that dasd_stats_write had to change slightly to maintain some odd differences between A) per device and global profile and B) proc and sysfs interface usage. Signed-off-by: Sebastian Ott Reviewed-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 90 +++++++----------------------------------- drivers/s390/block/dasd_int.h | 1 - drivers/s390/block/dasd_proc.c | 21 ++++++---- 3 files changed, 27 insertions(+), 85 deletions(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index a67e8dae73c3..be34ef41b7c7 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -674,10 +674,7 @@ EXPORT_SYMBOL(dasd_enable_device); unsigned int dasd_global_profile_level = DASD_PROFILE_OFF; #ifdef CONFIG_DASD_PROFILE -static struct dasd_profile_info dasd_global_profile_data; struct dasd_profile dasd_global_profile = { - .dentry = NULL, - .data = &dasd_global_profile_data, .lock = __SPIN_LOCK_UNLOCKED(dasd_global_profile.lock), }; static struct dentry *dasd_debugfs_global_entry; @@ -701,7 +698,7 @@ static void dasd_profile_start(struct dasd_block *block, break; spin_lock(&dasd_global_profile.lock); - if (dasd_global_profile_level) { + if (dasd_global_profile.data) { dasd_global_profile.data->dasd_io_nr_req[counter]++; if (rq_data_dir(req) == READ) dasd_global_profile.data->dasd_read_nr_req[counter]++; @@ -832,7 +829,7 @@ static void dasd_profile_end(struct dasd_block *block, dasd_profile_counter(endtime, endtime_ind); spin_lock(&dasd_global_profile.lock); - if (dasd_global_profile_level) { + if (dasd_global_profile.data) { dasd_profile_end_add_data(dasd_global_profile.data, cqr->startdev != block->base, cqr->cpmode == 1, @@ -884,11 +881,6 @@ void dasd_profile_reset(struct dasd_profile *profile) spin_unlock_bh(&profile->lock); } -void dasd_global_profile_reset(void) -{ - dasd_profile_reset(&dasd_global_profile); -} - int dasd_profile_on(struct dasd_profile *profile) { struct dasd_profile_info *data; @@ -956,12 +948,20 @@ static ssize_t dasd_stats_write(struct file *file, dasd_profile_reset(prof); } else if (strncmp(str, "on", 2) == 0) { rc = dasd_profile_on(prof); - if (!rc) - rc = user_len; + if (rc) + goto out; + rc = user_len; + if (prof == &dasd_global_profile) { + dasd_profile_reset(prof); + dasd_global_profile_level = DASD_PROFILE_GLOBAL_ONLY; + } } else if (strncmp(str, "off", 3) == 0) { + if (prof == &dasd_global_profile) + dasd_global_profile_level = DASD_PROFILE_OFF; dasd_profile_off(prof); } else rc = -EINVAL; +out: vfree(buffer); return rc; } @@ -1051,59 +1051,6 @@ static const struct file_operations dasd_stats_raw_fops = { .write = dasd_stats_write, }; -static ssize_t dasd_stats_global_write(struct file *file, - const char __user *user_buf, - size_t user_len, loff_t *pos) -{ - char *buffer, *str; - ssize_t rc; - - if (user_len > 65536) - user_len = 65536; - buffer = dasd_get_user_string(user_buf, user_len); - if (IS_ERR(buffer)) - return PTR_ERR(buffer); - str = skip_spaces(buffer); - rc = user_len; - if (strncmp(str, "reset", 5) == 0) { - dasd_global_profile_reset(); - } else if (strncmp(str, "on", 2) == 0) { - dasd_global_profile_reset(); - dasd_global_profile_level = DASD_PROFILE_GLOBAL_ONLY; - } else if (strncmp(str, "off", 3) == 0) { - dasd_global_profile_level = DASD_PROFILE_OFF; - } else - rc = -EINVAL; - vfree(buffer); - return rc; -} - -static int dasd_stats_global_show(struct seq_file *m, void *v) -{ - if (!dasd_global_profile_level) { - seq_puts(m, "disabled\n"); - return 0; - } - spin_lock_bh(&dasd_global_profile.lock); - dasd_stats_seq_print(m, dasd_global_profile.data); - spin_unlock_bh(&dasd_global_profile.lock); - return 0; -} - -static int dasd_stats_global_open(struct inode *inode, struct file *file) -{ - return single_open(file, dasd_stats_global_show, NULL); -} - -static const struct file_operations dasd_stats_global_fops = { - .owner = THIS_MODULE, - .open = dasd_stats_global_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = dasd_stats_global_write, -}; - static void dasd_profile_init(struct dasd_profile *profile, struct dentry *base_dentry) { @@ -1132,19 +1079,16 @@ static void dasd_profile_exit(struct dasd_profile *profile) static void dasd_statistics_removeroot(void) { dasd_global_profile_level = DASD_PROFILE_OFF; - debugfs_remove(dasd_global_profile.dentry); - dasd_global_profile.dentry = NULL; + dasd_profile_exit(&dasd_global_profile); debugfs_remove(dasd_debugfs_global_entry); debugfs_remove(dasd_debugfs_root_entry); } static void dasd_statistics_createroot(void) { - umode_t mode; struct dentry *pde; dasd_debugfs_root_entry = NULL; - dasd_debugfs_global_entry = NULL; pde = debugfs_create_dir("dasd", NULL); if (!pde || IS_ERR(pde)) goto error; @@ -1153,13 +1097,7 @@ static void dasd_statistics_createroot(void) if (!pde || IS_ERR(pde)) goto error; dasd_debugfs_global_entry = pde; - - mode = (S_IRUSR | S_IWUSR | S_IFREG); - pde = debugfs_create_file("statistics", mode, dasd_debugfs_global_entry, - NULL, &dasd_stats_global_fops); - if (!pde || IS_ERR(pde)) - goto error; - dasd_global_profile.dentry = pde; + dasd_profile_init(&dasd_global_profile, dasd_debugfs_global_entry); return; error: diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index 91731fa05604..227e3dea3155 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -728,7 +728,6 @@ int dasd_device_is_ro(struct dasd_device *); void dasd_profile_reset(struct dasd_profile *); int dasd_profile_on(struct dasd_profile *); void dasd_profile_off(struct dasd_profile *); -void dasd_global_profile_reset(void); char *dasd_get_user_string(const char __user *, size_t); /* externals in dasd_devmap.c */ diff --git a/drivers/s390/block/dasd_proc.c b/drivers/s390/block/dasd_proc.c index 76410084c48f..aa7bb2d1da81 100644 --- a/drivers/s390/block/dasd_proc.c +++ b/drivers/s390/block/dasd_proc.c @@ -212,15 +212,15 @@ static int dasd_stats_proc_show(struct seq_file *m, void *v) struct dasd_profile_info *prof; int factor; - /* check for active profiling */ - if (!dasd_global_profile_level) { + spin_lock_bh(&dasd_global_profile.lock); + prof = dasd_global_profile.data; + if (!prof) { + spin_unlock_bh(&dasd_global_profile.lock); seq_printf(m, "Statistics are off - they might be " "switched on using 'echo set on > " "/proc/dasd/statistics'\n"); return 0; } - spin_lock_bh(&dasd_global_profile.lock); - prof = dasd_global_profile.data; /* prevent counter 'overflow' on output */ for (factor = 1; (prof->dasd_io_reqs / factor) > 9999999; @@ -293,14 +293,19 @@ static ssize_t dasd_stats_proc_write(struct file *file, dasd_stats_all_block_off(); goto out_error; } - dasd_global_profile_reset(); + rc = dasd_profile_on(&dasd_global_profile); + if (rc) { + dasd_stats_all_block_off(); + goto out_error; + } + dasd_profile_reset(&dasd_global_profile); dasd_global_profile_level = DASD_PROFILE_ON; pr_info("The statistics feature has been switched " "on\n"); } else if (strcmp(str, "off") == 0) { - /* switch off and reset statistics profiling */ + /* switch off statistics profiling */ dasd_global_profile_level = DASD_PROFILE_OFF; - dasd_global_profile_reset(); + dasd_profile_off(&dasd_global_profile); dasd_stats_all_block_off(); pr_info("The statistics feature has been switched " "off\n"); @@ -308,7 +313,7 @@ static ssize_t dasd_stats_proc_write(struct file *file, goto out_parse_error; } else if (strncmp(str, "reset", 5) == 0) { /* reset the statistics */ - dasd_global_profile_reset(); + dasd_profile_reset(&dasd_global_profile); dasd_stats_all_block_reset(); pr_info("The statistics have been reset\n"); } else -- cgit v1.2.3-70-g09d2 From db1177ee6206f957f579fdbfebb2c6a64e82c694 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Thu, 29 Jan 2015 14:38:38 +0100 Subject: s390/mm: correct missing space when reporting user process faults Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/mm/fault.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index 232c14ea4269..0d02e48cf04a 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -261,7 +261,7 @@ static inline void report_user_fault(struct pt_regs *regs, long signr) return; if (!printk_ratelimit()) return; - printk(KERN_ALERT "User process fault: interruption code %04x ilc:%d", + printk(KERN_ALERT "User process fault: interruption code %04x ilc:%d ", regs->int_code & 0xffff, regs->int_code >> 17); print_vma_addr(KERN_CONT "in ", regs->psw.addr & PSW_ADDR_INSN); printk(KERN_CONT "\n"); -- cgit v1.2.3-70-g09d2 From 5c6497c50f8d809eac6d01512c291a1f67382abd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Jan 2015 13:45:35 +0100 Subject: s390/jump label: add sanity checks Add sanity checks to verify that only expected code will be replaced. If the code patterns do not match print the code patterns and panic, since something went terribly wrong. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/jump_label.c | 56 ++++++++++++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 14 deletions(-) diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c index b987ab2c1541..25aef40584f7 100644 --- a/arch/s390/kernel/jump_label.c +++ b/arch/s390/kernel/jump_label.c @@ -22,31 +22,59 @@ struct insn_args { enum jump_label_type type; }; +static void jump_label_make_nop(struct jump_entry *entry, struct insn *insn) +{ + /* brcl 0,0 */ + insn->opcode = 0xc004; + insn->offset = 0; +} + +static void jump_label_make_branch(struct jump_entry *entry, struct insn *insn) +{ + /* brcl 15,offset */ + insn->opcode = 0xc0f4; + insn->offset = (entry->target - entry->code) >> 1; +} + +static void jump_label_bug(struct jump_entry *entry, struct insn *insn) +{ + unsigned char *ipc = (unsigned char *)entry->code; + unsigned char *ipe = (unsigned char *)insn; + + pr_emerg("Jump label code mismatch at %pS [%p]\n", ipc, ipc); + pr_emerg("Found: %02x %02x %02x %02x %02x %02x\n", + ipc[0], ipc[1], ipc[2], ipc[3], ipc[4], ipc[5]); + pr_emerg("Expected: %02x %02x %02x %02x %02x %02x\n", + ipe[0], ipe[1], ipe[2], ipe[3], ipe[4], ipe[5]); + panic("Corrupted kernel text"); +} + static void __jump_label_transform(struct jump_entry *entry, - enum jump_label_type type) + enum jump_label_type type, + int init) { - struct insn insn; - int rc; + struct insn old, new; if (type == JUMP_LABEL_ENABLE) { - /* brcl 15,offset */ - insn.opcode = 0xc0f4; - insn.offset = (entry->target - entry->code) >> 1; + jump_label_make_nop(entry, &old); + jump_label_make_branch(entry, &new); } else { - /* brcl 0,0 */ - insn.opcode = 0xc004; - insn.offset = 0; + if (init) + jump_label_make_nop(entry, &old); + else + jump_label_make_branch(entry, &old); + jump_label_make_nop(entry, &new); } - - rc = probe_kernel_write((void *)entry->code, &insn, JUMP_LABEL_NOP_SIZE); - WARN_ON_ONCE(rc < 0); + if (memcmp((void *)entry->code, &old, sizeof(old))) + jump_label_bug(entry, &old); + probe_kernel_write((void *)entry->code, &new, sizeof(new)); } static int __sm_arch_jump_label_transform(void *data) { struct insn_args *args = data; - __jump_label_transform(args->entry, args->type); + __jump_label_transform(args->entry, args->type, 0); return 0; } @@ -64,7 +92,7 @@ void arch_jump_label_transform(struct jump_entry *entry, void arch_jump_label_transform_static(struct jump_entry *entry, enum jump_label_type type) { - __jump_label_transform(entry, type); + __jump_label_transform(entry, type, 1); } #endif -- cgit v1.2.3-70-g09d2 From d5caa4dbf9bd2ad8cd7f6be0ca76722be947182b Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 29 Jan 2015 14:10:22 +0100 Subject: s390/jump label: use different nop instruction Use a brcl 0,2 instruction for jump label nops during compile time, so we don't mix up the different nops during mcount/hotpatch call site detection. The initial jump label code instruction replacement will exchange these instructions with either a branch or a brcl 0,0 instruction. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/include/asm/jump_label.h | 7 ++++++- arch/s390/kernel/jump_label.c | 19 +++++++++++++------ 2 files changed, 19 insertions(+), 7 deletions(-) diff --git a/arch/s390/include/asm/jump_label.h b/arch/s390/include/asm/jump_label.h index 346b1c85ffb4..58642fd29c87 100644 --- a/arch/s390/include/asm/jump_label.h +++ b/arch/s390/include/asm/jump_label.h @@ -4,6 +4,7 @@ #include #define JUMP_LABEL_NOP_SIZE 6 +#define JUMP_LABEL_NOP_OFFSET 2 #ifdef CONFIG_64BIT #define ASM_PTR ".quad" @@ -13,9 +14,13 @@ #define ASM_ALIGN ".balign 4" #endif +/* + * We use a brcl 0,2 instruction for jump labels at compile time so it + * can be easily distinguished from a hotpatch generated instruction. + */ static __always_inline bool arch_static_branch(struct static_key *key) { - asm_volatile_goto("0: brcl 0,0\n" + asm_volatile_goto("0: brcl 0,"__stringify(JUMP_LABEL_NOP_OFFSET)"\n" ".pushsection __jump_table, \"aw\"\n" ASM_ALIGN "\n" ASM_PTR " 0b, %l[label], %0\n" diff --git a/arch/s390/kernel/jump_label.c b/arch/s390/kernel/jump_label.c index 25aef40584f7..cb2d51e779df 100644 --- a/arch/s390/kernel/jump_label.c +++ b/arch/s390/kernel/jump_label.c @@ -49,6 +49,11 @@ static void jump_label_bug(struct jump_entry *entry, struct insn *insn) panic("Corrupted kernel text"); } +static struct insn orignop = { + .opcode = 0xc004, + .offset = JUMP_LABEL_NOP_OFFSET >> 1, +}; + static void __jump_label_transform(struct jump_entry *entry, enum jump_label_type type, int init) @@ -59,14 +64,16 @@ static void __jump_label_transform(struct jump_entry *entry, jump_label_make_nop(entry, &old); jump_label_make_branch(entry, &new); } else { - if (init) - jump_label_make_nop(entry, &old); - else - jump_label_make_branch(entry, &old); + jump_label_make_branch(entry, &old); jump_label_make_nop(entry, &new); } - if (memcmp((void *)entry->code, &old, sizeof(old))) - jump_label_bug(entry, &old); + if (init) { + if (memcmp((void *)entry->code, &orignop, sizeof(orignop))) + jump_label_bug(entry, &old); + } else { + if (memcmp((void *)entry->code, &old, sizeof(old))) + jump_label_bug(entry, &old); + } probe_kernel_write((void *)entry->code, &new, sizeof(new)); } -- cgit v1.2.3-70-g09d2 From 5c75a0dac3099f33a500b8b31f00541374752049 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Wed, 28 Jan 2015 16:52:01 +0100 Subject: s390/smp: increase maximum value of NR_CPUS to 512 With SMT we can have more than 256 CPUs. Let's make them available. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 8d11babf9aa5..373cd5badf1c 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -373,14 +373,14 @@ config SMP Even if you don't know what to do here, say Y. config NR_CPUS - int "Maximum number of CPUs (2-256)" - range 2 256 + int "Maximum number of CPUs (2-512)" + range 2 512 depends on SMP default "32" if !64BIT default "64" if 64BIT help This allows you to specify the maximum number of CPUs which this - kernel will support. The maximum supported value is 256 and the + kernel will support. The maximum supported value is 512 and the minimum value which makes sense is 2. This is purely to save memory - each supported CPU adds -- cgit v1.2.3-70-g09d2 From ea96f78813823ab186e7e52122c06fb9c3cf6e20 Mon Sep 17 00:00:00 2001 From: Ingo Tuchscherer Date: Mon, 2 Feb 2015 17:50:17 +0100 Subject: s390/zcrypt: fixed domain scanning problem (again) Older machines with more then 16 domains need a special check before PQAP instructions can be processed. With commit 5bc334bff9a6e189 this check was reverted by accident. This patch re-establishes the additional code needed for checking the extended domains for older machines. Signed-off-by: Ingo Tuchscherer Signed-off-by: Martin Schwidefsky --- drivers/s390/crypto/ap_bus.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c index a60fc2f9f4b2..3d7f19fb9a4e 100644 --- a/drivers/s390/crypto/ap_bus.c +++ b/drivers/s390/crypto/ap_bus.c @@ -1060,9 +1060,13 @@ static inline int ap_test_config_card_id(unsigned int id) */ static inline int ap_test_config_domain(unsigned int domain) { - if (!ap_configuration) - return 1; - return ap_test_config(ap_configuration->aqm, domain); + if (!ap_configuration) /* QCI not supported */ + if (domain < 16) + return 1; /* then domains 0...15 are configured */ + else + return 0; + else + return ap_test_config(ap_configuration->aqm, domain); } /* -- cgit v1.2.3-70-g09d2 From 45cce4ccafe3cddc924ef5221d22b9853fc9a13c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 9 Feb 2015 12:54:16 +0100 Subject: s390/cacheinfo: don't use smp_processor_id() in preemptible context show_cacheinfo() needs to access the cacheinfo structure of any online cpu. This was done with using smp_processor_id() as in index while in preemtible context. This means the cpu could be offline and the data be gone when it would be accessed. Better use any online cpu address and protect the data by get_online_cpus() and put_online_cpus(). Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/cache.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/s390/kernel/cache.c b/arch/s390/kernel/cache.c index fe21f074cf9f..632fa06ea162 100644 --- a/arch/s390/kernel/cache.c +++ b/arch/s390/kernel/cache.c @@ -66,10 +66,12 @@ static const enum cache_type cache_type_map[] = { void show_cacheinfo(struct seq_file *m) { - int cpu = smp_processor_id(), idx; - struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); + struct cpu_cacheinfo *this_cpu_ci; struct cacheinfo *cache; + int idx; + get_online_cpus(); + this_cpu_ci = get_cpu_cacheinfo(cpumask_any(cpu_online_mask)); for (idx = 0; idx < this_cpu_ci->num_leaves; idx++) { cache = this_cpu_ci->info_list + idx; seq_printf(m, "cache%-11d: ", idx); @@ -82,6 +84,7 @@ void show_cacheinfo(struct seq_file *m) seq_printf(m, "associativity=%d", cache->ways_of_associativity); seq_puts(m, "\n"); } + put_online_cpus(); } static inline enum cache_type get_cache_type(struct cache_info *ci, int level) -- cgit v1.2.3-70-g09d2 From 34c0dad752294f373a0720840f59e186788ba227 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 9 Feb 2015 14:49:10 +0100 Subject: s390/hypfs: Add diagnose 0c support With this feature, you can read the CPU performance metrics provided by the z/VM diagnose 0C. This then allows to get the management time for each online CPU of the guest where the diagnose is executed. The new debugfs file /sys/kernel/debug/s390_hypfs/diag_0c exports the diag0C binary data to user space via an open/read/close interface. The binary data consists out of a header structure followed by an array that contains the diagnose 0c data for each online CPU. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/Makefile | 1 + arch/s390/hypfs/hypfs.h | 4 ++ arch/s390/hypfs/hypfs_diag0c.c | 139 +++++++++++++++++++++++++++++++++++++ arch/s390/hypfs/inode.c | 9 ++- arch/s390/include/uapi/asm/hypfs.h | 35 +++++++++- 5 files changed, 184 insertions(+), 4 deletions(-) create mode 100644 arch/s390/hypfs/hypfs_diag0c.c diff --git a/arch/s390/hypfs/Makefile b/arch/s390/hypfs/Makefile index 06f8d95a16cd..2ee25ba252d6 100644 --- a/arch/s390/hypfs/Makefile +++ b/arch/s390/hypfs/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_S390_HYPFS_FS) += s390_hypfs.o s390_hypfs-objs := inode.o hypfs_diag.o hypfs_vm.o hypfs_dbfs.o hypfs_sprp.o +s390_hypfs-objs += hypfs_diag0c.o diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h index b34b5ab90a31..36d093fa9fb3 100644 --- a/arch/s390/hypfs/hypfs.h +++ b/arch/s390/hypfs/hypfs.h @@ -37,6 +37,10 @@ extern int hypfs_vm_init(void); extern void hypfs_vm_exit(void); extern int hypfs_vm_create_files(struct dentry *root); +/* VM diagnose 0c */ +int hypfs_diag0c_init(void); +void hypfs_diag0c_exit(void); + /* Set Partition-Resource Parameter */ int hypfs_sprp_init(void); void hypfs_sprp_exit(void); diff --git a/arch/s390/hypfs/hypfs_diag0c.c b/arch/s390/hypfs/hypfs_diag0c.c new file mode 100644 index 000000000000..d4c0d3717543 --- /dev/null +++ b/arch/s390/hypfs/hypfs_diag0c.c @@ -0,0 +1,139 @@ +/* + * Hypervisor filesystem for Linux on s390 + * + * Diag 0C implementation + * + * Copyright IBM Corp. 2014 + */ + +#include +#include +#include +#include "hypfs.h" + +#define DBFS_D0C_HDR_VERSION 0 + +/* + * Execute diagnose 0c in 31 bit mode + */ +static void diag0c(struct hypfs_diag0c_entry *entry) +{ + asm volatile ( +#ifdef CONFIG_64BIT + " sam31\n" + " diag %0,%0,0x0c\n" + " sam64\n" +#else + " diag %0,%0,0x0c\n" +#endif + : /* no output register */ + : "a" (entry) + : "memory"); +} + +/* + * Get hypfs_diag0c_entry from CPU vector and store diag0c data + */ +static void diag0c_fn(void *data) +{ + diag0c(((void **) data)[smp_processor_id()]); +} + +/* + * Allocate buffer and store diag 0c data + */ +static void *diag0c_store(unsigned int *count) +{ + struct hypfs_diag0c_data *diag0c_data; + unsigned int cpu_count, cpu, i; + void **cpu_vec; + + get_online_cpus(); + cpu_count = num_online_cpus(); + cpu_vec = kmalloc(sizeof(*cpu_vec) * num_possible_cpus(), GFP_KERNEL); + if (!cpu_vec) + goto fail_put_online_cpus; + /* Note: Diag 0c needs 8 byte alignment and real storage */ + diag0c_data = kzalloc(sizeof(struct hypfs_diag0c_hdr) + + cpu_count * sizeof(struct hypfs_diag0c_entry), + GFP_KERNEL | GFP_DMA); + if (!diag0c_data) + goto fail_kfree_cpu_vec; + i = 0; + /* Fill CPU vector for each online CPU */ + for_each_online_cpu(cpu) { + diag0c_data->entry[i].cpu = cpu; + cpu_vec[cpu] = &diag0c_data->entry[i++]; + } + /* Collect data all CPUs */ + on_each_cpu(diag0c_fn, cpu_vec, 1); + *count = cpu_count; + kfree(cpu_vec); + put_online_cpus(); + return diag0c_data; + +fail_kfree_cpu_vec: + kfree(cpu_vec); +fail_put_online_cpus: + put_online_cpus(); + return ERR_PTR(-ENOMEM); +} + +/* + * Hypfs DBFS callback: Free diag 0c data + */ +static void dbfs_diag0c_free(const void *data) +{ + kfree(data); +} + +/* + * Hypfs DBFS callback: Create diag 0c data + */ +static int dbfs_diag0c_create(void **data, void **data_free_ptr, size_t *size) +{ + struct hypfs_diag0c_data *diag0c_data; + unsigned int count; + + diag0c_data = diag0c_store(&count); + if (IS_ERR(diag0c_data)) + return PTR_ERR(diag0c_data); + memset(&diag0c_data->hdr, 0, sizeof(diag0c_data->hdr)); + get_tod_clock_ext(diag0c_data->hdr.tod_ext); + diag0c_data->hdr.len = count * sizeof(struct hypfs_diag0c_entry); + diag0c_data->hdr.version = DBFS_D0C_HDR_VERSION; + diag0c_data->hdr.count = count; + *data = diag0c_data; + *data_free_ptr = diag0c_data; + *size = diag0c_data->hdr.len + sizeof(struct hypfs_diag0c_hdr); + return 0; +} + +/* + * Hypfs DBFS file structure + */ +static struct hypfs_dbfs_file dbfs_file_0c = { + .name = "diag_0c", + .data_create = dbfs_diag0c_create, + .data_free = dbfs_diag0c_free, +}; + +/* + * Initialize diag 0c interface for z/VM + */ +int __init hypfs_diag0c_init(void) +{ + if (!MACHINE_IS_VM) + return 0; + return hypfs_dbfs_create_file(&dbfs_file_0c); +} + +/* + * Shutdown diag 0c interface for z/VM + */ +void hypfs_diag0c_exit(void) +{ + if (!MACHINE_IS_VM) + return; + hypfs_dbfs_remove_file(&dbfs_file_0c); +} diff --git a/arch/s390/hypfs/inode.c b/arch/s390/hypfs/inode.c index c952b981e4f2..4c8008dd938e 100644 --- a/arch/s390/hypfs/inode.c +++ b/arch/s390/hypfs/inode.c @@ -482,10 +482,14 @@ static int __init hypfs_init(void) rc = -ENODATA; goto fail_hypfs_vm_exit; } + if (hypfs_diag0c_init()) { + rc = -ENODATA; + goto fail_hypfs_sprp_exit; + } s390_kobj = kobject_create_and_add("s390", hypervisor_kobj); if (!s390_kobj) { rc = -ENOMEM; - goto fail_hypfs_sprp_exit; + goto fail_hypfs_diag0c_exit; } rc = register_filesystem(&hypfs_type); if (rc) @@ -494,6 +498,8 @@ static int __init hypfs_init(void) fail_filesystem: kobject_put(s390_kobj); +fail_hypfs_diag0c_exit: + hypfs_diag0c_exit(); fail_hypfs_sprp_exit: hypfs_sprp_exit(); fail_hypfs_vm_exit: @@ -510,6 +516,7 @@ static void __exit hypfs_exit(void) { unregister_filesystem(&hypfs_type); kobject_put(s390_kobj); + hypfs_diag0c_exit(); hypfs_sprp_exit(); hypfs_vm_exit(); hypfs_diag_exit(); diff --git a/arch/s390/include/uapi/asm/hypfs.h b/arch/s390/include/uapi/asm/hypfs.h index 37998b449531..b3fe12d8dd87 100644 --- a/arch/s390/include/uapi/asm/hypfs.h +++ b/arch/s390/include/uapi/asm/hypfs.h @@ -1,16 +1,19 @@ /* - * IOCTL interface for hypfs + * Structures for hypfs interface * * Copyright IBM Corp. 2013 * * Author: Martin Schwidefsky */ -#ifndef _ASM_HYPFS_CTL_H -#define _ASM_HYPFS_CTL_H +#ifndef _ASM_HYPFS_H +#define _ASM_HYPFS_H #include +/* + * IOCTL for binary interface /sys/kernel/debug/diag_304 + */ struct hypfs_diag304 { __u32 args[2]; __u64 data; @@ -22,4 +25,30 @@ struct hypfs_diag304 { #define HYPFS_DIAG304 \ _IOWR(HYPFS_IOCTL_MAGIC, 0x20, struct hypfs_diag304) +/* + * Structures for binary interface /sys/kernel/debug/diag_0c + */ +struct hypfs_diag0c_hdr { + __u64 len; /* Length of diag0c buffer without header */ + __u16 version; /* Version of header */ + char reserved1[6]; /* Reserved */ + char tod_ext[16]; /* TOD clock for diag0c */ + __u64 count; /* Number of entries (CPUs) in diag0c array */ + char reserved2[24]; /* Reserved */ +}; + +struct hypfs_diag0c_entry { + char date[8]; /* MM/DD/YY in EBCDIC */ + char time[8]; /* HH:MM:SS in EBCDIC */ + __u64 virtcpu; /* Virtual time consumed by the virt CPU (us) */ + __u64 totalproc; /* Total of virtual and simulation time (us) */ + __u32 cpu; /* Linux logical CPU number */ + __u32 reserved; /* Align to 8 byte */ +}; + +struct hypfs_diag0c_data { + struct hypfs_diag0c_hdr hdr; /* 64 byte header */ + struct hypfs_diag0c_entry entry[]; /* diag0c entry array */ +}; + #endif -- cgit v1.2.3-70-g09d2 From a178220df3a55c3ec46c2c2f0788a377acdb79c3 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Mon, 9 Feb 2015 14:49:32 +0100 Subject: s390/hypfs: Eliminate hypfs interval Currently the binary hypfs interfaces provides new data only once within an interval time of one second. This patch removes this restriction and now new data is returned immediately on every read on a hypfs binary file. This is done in order to allow more consistent snapshots for programs that read multiple hypfs binary files. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky --- arch/s390/hypfs/hypfs.h | 3 --- arch/s390/hypfs/hypfs_dbfs.c | 49 +++++++++++--------------------------------- 2 files changed, 12 insertions(+), 40 deletions(-) diff --git a/arch/s390/hypfs/hypfs.h b/arch/s390/hypfs/hypfs.h index 36d093fa9fb3..eecde500ed49 100644 --- a/arch/s390/hypfs/hypfs.h +++ b/arch/s390/hypfs/hypfs.h @@ -53,7 +53,6 @@ struct hypfs_dbfs_data { void *buf_free_ptr; size_t size; struct hypfs_dbfs_file *dbfs_file; - struct kref kref; }; struct hypfs_dbfs_file { @@ -65,8 +64,6 @@ struct hypfs_dbfs_file { unsigned long); /* Private data for hypfs_dbfs.c */ - struct hypfs_dbfs_data *data; - struct delayed_work data_free_work; struct mutex lock; struct dentry *dentry; }; diff --git a/arch/s390/hypfs/hypfs_dbfs.c b/arch/s390/hypfs/hypfs_dbfs.c index 47fe1055c714..752f6df3e697 100644 --- a/arch/s390/hypfs/hypfs_dbfs.c +++ b/arch/s390/hypfs/hypfs_dbfs.c @@ -17,33 +17,16 @@ static struct hypfs_dbfs_data *hypfs_dbfs_data_alloc(struct hypfs_dbfs_file *f) data = kmalloc(sizeof(*data), GFP_KERNEL); if (!data) return NULL; - kref_init(&data->kref); data->dbfs_file = f; return data; } -static void hypfs_dbfs_data_free(struct kref *kref) +static void hypfs_dbfs_data_free(struct hypfs_dbfs_data *data) { - struct hypfs_dbfs_data *data; - - data = container_of(kref, struct hypfs_dbfs_data, kref); data->dbfs_file->data_free(data->buf_free_ptr); kfree(data); } -static void data_free_delayed(struct work_struct *work) -{ - struct hypfs_dbfs_data *data; - struct hypfs_dbfs_file *df; - - df = container_of(work, struct hypfs_dbfs_file, data_free_work.work); - mutex_lock(&df->lock); - data = df->data; - df->data = NULL; - mutex_unlock(&df->lock); - kref_put(&data->kref, hypfs_dbfs_data_free); -} - static ssize_t dbfs_read(struct file *file, char __user *buf, size_t size, loff_t *ppos) { @@ -56,28 +39,21 @@ static ssize_t dbfs_read(struct file *file, char __user *buf, df = file_inode(file)->i_private; mutex_lock(&df->lock); - if (!df->data) { - data = hypfs_dbfs_data_alloc(df); - if (!data) { - mutex_unlock(&df->lock); - return -ENOMEM; - } - rc = df->data_create(&data->buf, &data->buf_free_ptr, - &data->size); - if (rc) { - mutex_unlock(&df->lock); - kfree(data); - return rc; - } - df->data = data; - schedule_delayed_work(&df->data_free_work, HZ); + data = hypfs_dbfs_data_alloc(df); + if (!data) { + mutex_unlock(&df->lock); + return -ENOMEM; + } + rc = df->data_create(&data->buf, &data->buf_free_ptr, &data->size); + if (rc) { + mutex_unlock(&df->lock); + kfree(data); + return rc; } - data = df->data; - kref_get(&data->kref); mutex_unlock(&df->lock); rc = simple_read_from_buffer(buf, size, ppos, data->buf, data->size); - kref_put(&data->kref, hypfs_dbfs_data_free); + hypfs_dbfs_data_free(data); return rc; } @@ -108,7 +84,6 @@ int hypfs_dbfs_create_file(struct hypfs_dbfs_file *df) if (IS_ERR(df->dentry)) return PTR_ERR(df->dentry); mutex_init(&df->lock); - INIT_DELAYED_WORK(&df->data_free_work, data_free_delayed); return 0; } -- cgit v1.2.3-70-g09d2 From 6a039eab53c01a58bfff95c78fc800ca7de27c77 Mon Sep 17 00:00:00 2001 From: Hendrik Brueckner Date: Mon, 9 Feb 2015 16:47:00 +0100 Subject: s390/process: free vx save area when releasing tasks If a task uses vector registers, a save area is allocated to save/restore register states. Free the save area when releasing the task. Found the Memory leak with kmemleak: unreferenced object 0x72885e00 (size 512): comm "vx-test", pid 26123, jiffies 4294945635 (age 256.810s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 01 db 71 06 41 .............q.A 00 00 00 00 00 00 00 00 24 f7 a9 a7 51 94 79 bb ........$...Q.y. backtrace: [<00000000002d1c8a>] kmem_cache_alloc_trace+0x272/0x3d0 [<00000000001014ac>] alloc_vector_registers+0x54/0x138 [<00000000001017c8>] data_exception+0x158/0x1b0 [<00000000008b551e>] pgm_check_handler+0x13e/0x180 [<00000000800008b6>] 0x800008b6 Signed-off-by: Hendrik Brueckner Signed-off-by: Martin Schwidefsky --- arch/s390/kernel/process.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 2c1eb4f3aaf5..13fc0978ca7e 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -79,6 +79,14 @@ void release_thread(struct task_struct *dead_task) { } +#ifdef CONFIG_64BIT +void arch_release_task_struct(struct task_struct *tsk) +{ + if (tsk->thread.vxrs) + kfree(tsk->thread.vxrs); +} +#endif + int copy_thread(unsigned long clone_flags, unsigned long new_stackp, unsigned long arg, struct task_struct *p) { -- cgit v1.2.3-70-g09d2