From 8d598cabf50d837e69ebd6fc86aec5550df2b3a2 Mon Sep 17 00:00:00 2001 From: Phil Edworthy Date: Tue, 3 Nov 2015 16:19:26 +0000 Subject: PCI: rcar: Allow DT to override default window settings If the DTB specifies dma-ranges, use those values. Otherwise, default to the values that were previously hardcoded into the driver. Signed-off-by: Phil Edworthy Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring Acked-by: Simon Horman --- Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 7fab84b33531..891463cb09c2 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -24,6 +24,11 @@ Required properties: - interrupt-map-mask: standard property that helps to define the interrupt mapping. +Optional properties: +- dma-ranges: a single range for the inbound memory region. If not supplied, + defaults to 1GiB at 0x40000000. Note there are hardware restrictions on the + allowed combinations of address and size. + Example SoC configuration: pci0: pci@ee090000 { @@ -38,6 +43,7 @@ Example SoC configuration: #address-cells = <3>; #size-cells = <2>; #interrupt-cells = <1>; + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x40000000>; interrupt-map-mask = <0xff00 0 0 0x7>; interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH -- cgit v1.2.3-70-g09d2 From e8b8318de645c04f8600cb5af6f6773a1878ee9d Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Fri, 4 Dec 2015 09:34:58 -0800 Subject: PCI: iproc: Update iProc PCIe device tree binding Add a new compatible string "brcm,iproc-pcie-paxc", for PAXC-based iProc PCIe root complex. A PAXC-based PCIe root complex is connected to emulated endpoint devices internal to the ASIC. Signed-off-by: Ray Jui Signed-off-by: Bjorn Helgaas Reviewed-by: Scott Branden --- Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index 45c2a8094a9f..4c5beaa5436a 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -1,7 +1,10 @@ * Broadcom iProc PCIe controller with the platform bus interface Required properties: -- compatible: Must be "brcm,iproc-pcie" +- compatible: Must be "brcm,iproc-pcie" for PAXB, or "brcm,iproc-pcie-paxc" + for PAXC. PAXB-based root complex is used for external endpoint devices. + PAXC-based root complex is connected to emulated endpoint devices + internal to the ASIC - reg: base address and length of the PCIe controller I/O register space - #interrupt-cells: set to <1> - interrupt-map-mask and interrupt-map, standard PCI properties to define the -- cgit v1.2.3-70-g09d2 From c7bd48195377435ecaf38869b936be8e7abe3489 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Fri, 4 Dec 2015 09:35:00 -0800 Subject: PCI: iproc: Add iProc PCIe MSI device tree binding Update the iProc PCIe device tree bindings with added binding information for MSI. Signed-off-by: Ray Jui Signed-off-by: Bjorn Helgaas Reviewed-by: Anup Patel Reviewed-by: Vikram Prakash Reviewed-by: Scott Branden --- .../devicetree/bindings/pci/brcm,iproc-pcie.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt index 4c5beaa5436a..01b88f4e0d5b 100644 --- a/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt +++ b/Documentation/devicetree/bindings/pci/brcm,iproc-pcie.txt @@ -35,6 +35,28 @@ Optional: - brcm,pcie-ob-oarr-size: Some iProc SoCs need the OARR size bit to be set to increase the outbound window size +MSI support (optional): + +For older platforms without MSI integrated in the GIC, iProc PCIe core provides +an event queue based MSI support. The iProc MSI uses host memories to store +MSI posted writes in the event queues + +- msi-parent: Link to the device node of the MSI controller. On newer iProc +platforms, the MSI controller may be gicv2m or gicv3-its. On older iProc +platforms without MSI support in its interrupt controller, one may use the +event queue based MSI support integrated within the iProc PCIe core. + +When the iProc event queue based MSI is used, one needs to define the +following properties in the MSI device node: +- compatible: Must be "brcm,iproc-msi" +- msi-controller: claims itself as an MSI controller +- interrupt-parent: Link to its parent interrupt device +- interrupts: List of interrupt IDs from its parent interrupt device + +Optional properties: +- brcm,pcie-msi-inten: Needs to be present for some older iProc platforms that +require the interrupt enable registers to be set explicitly to enable MSI + Example: pcie0: pcie@18012000 { compatible = "brcm,iproc-pcie"; @@ -61,6 +83,19 @@ Example: brcm,pcie-ob-oarr-size; brcm,pcie-ob-axi-offset = <0x00000000>; brcm,pcie-ob-window-size = <256>; + + msi-parent = <&msi0>; + + /* iProc event queue based MSI */ + msi0: msi@18012000 { + compatible = "brcm,iproc-msi"; + msi-controller; + interrupt-parent = <&gic>; + interrupts = , + , + , + , + }; }; pcie1: pcie@18013000 { -- cgit v1.2.3-70-g09d2 From e015f88c368da1e6e3567288c290c31d57b2ba94 Mon Sep 17 00:00:00 2001 From: Harunobu Kurokawa Date: Wed, 25 Nov 2015 15:30:39 +0000 Subject: PCI: rcar: Add support for R-Car H3 to pcie-rcar Add the "renesas,pcie-r8a7795" property for the R-Car H3 device to the pcie-rcar driver. Tested-by: Wolfram Sang Signed-off-by: Harunobu Kurokawa Signed-off-by: Bjorn Helgaas Acked-by: Wolfram Sang --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 3 ++- drivers/pci/host/pcie-rcar.c | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index 29d3b989d3b0..ab2e75f59518 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -2,7 +2,8 @@ Required properties: - compatible: should contain one of the following - "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791" + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791", + "renesas,pcie-r8a7795" - reg: base address and length of the pcie controller registers. - #address-cells: set to <3> - #size-cells: set to <2> diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index d12faf40d7a1..0c819a00e8ce 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -917,6 +917,7 @@ static const struct of_device_id rcar_pcie_of_match[] = { { .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 }, { .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init }, { .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init }, + { .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init }, {}, }; MODULE_DEVICE_TABLE(of, rcar_pcie_of_match); -- cgit v1.2.3-70-g09d2 From 3517652fda51bfeea3768ba05819744c8ac57d9e Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 3 Dec 2015 07:51:37 +0900 Subject: PCI: rcar: Add gen2 fallback compatibility string for pci-rcar-gen2 Add fallback compatibility string for R-Car Gen 2 family. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt | 11 +++++++++-- drivers/pci/host/pci-rcar-gen2.c | 1 + 2 files changed, 10 insertions(+), 2 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 891463cb09c2..4e8b90e43dd8 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -8,7 +8,14 @@ OHCI and EHCI controllers. Required properties: - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC; "renesas,pci-r8a7791" for the R8A7791 SoC; - "renesas,pci-r8a7794" for the R8A7794 SoC. + "renesas,pci-r8a7794" for the R8A7794 SoC; + "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device + + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: A list of physical regions to access the device: the first is the operational registers for the OHCI/EHCI controllers and the second is for the bridge configuration and control registers. @@ -32,7 +39,7 @@ Optional properties: Example SoC configuration: pci0: pci@ee090000 { - compatible = "renesas,pci-r8a7790"; + compatible = "renesas,pci-r8a7790", "renesas,pci-rcar-gen2"; clocks = <&mstp7_clks R8A7790_CLK_EHCI>; reg = <0x0 0xee090000 0x0 0xc00>, <0x0 0xee080000 0x0 0x1100>; diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c index 62951165dcbb..9980a4bdae7e 100644 --- a/drivers/pci/host/pci-rcar-gen2.c +++ b/drivers/pci/host/pci-rcar-gen2.c @@ -430,6 +430,7 @@ static int rcar_pci_probe(struct platform_device *pdev) } static struct of_device_id rcar_pci_of_match[] = { + { .compatible = "renesas,pci-rcar-gen2", }, { .compatible = "renesas,pci-r8a7790", }, { .compatible = "renesas,pci-r8a7791", }, { .compatible = "renesas,pci-r8a7794", }, -- cgit v1.2.3-70-g09d2 From a37b3eafe8e9cbe7c7754bc6003c125b23749554 Mon Sep 17 00:00:00 2001 From: Simon Horman Date: Thu, 3 Dec 2015 07:51:39 +0900 Subject: PCI: rcar: Add gen2 fallback compatibility string for pcie-rcar Add fallback compatibility string for R-Car Gen 2 family. This is in keeping with the fallback scheme being adopted wherever appropriate for drivers for Renesas SoCs. Signed-off-by: Simon Horman Signed-off-by: Bjorn Helgaas --- Documentation/devicetree/bindings/pci/rcar-pci.txt | 15 +++++++++++---- drivers/pci/host/pcie-rcar.c | 1 + 2 files changed, 12 insertions(+), 4 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt index ab2e75f59518..558fe528ae19 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci.txt +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt @@ -1,9 +1,16 @@ * Renesas RCar PCIe interface Required properties: -- compatible: should contain one of the following - "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791", - "renesas,pcie-r8a7795" +compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC; + "renesas,pcie-r8a7790" for the R8A7790 SoC; + "renesas,pcie-r8a7791" for the R8A7791 SoC; + "renesas,pcie-r8a7795" for the R8A7795 SoC; + "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device. + + When compatible with the generic version, nodes must list the + SoC-specific version corresponding to the platform first + followed by the generic version. + - reg: base address and length of the pcie controller registers. - #address-cells: set to <3> - #size-cells: set to <2> @@ -26,7 +33,7 @@ Example: SoC specific DT Entry: pcie: pcie@fe000000 { - compatible = "renesas,pcie-r8a7791"; + compatible = "renesas,pcie-r8a7791", "renesas,pcie-rcar-gen2"; reg = <0 0xfe000000 0 0x80000>; #address-cells = <3>; #size-cells = <2>; diff --git a/drivers/pci/host/pcie-rcar.c b/drivers/pci/host/pcie-rcar.c index 0c819a00e8ce..5c2962646b17 100644 --- a/drivers/pci/host/pcie-rcar.c +++ b/drivers/pci/host/pcie-rcar.c @@ -915,6 +915,7 @@ static int rcar_pcie_parse_map_dma_ranges(struct rcar_pcie *pcie, static const struct of_device_id rcar_pcie_of_match[] = { { .compatible = "renesas,pcie-r8a7779", .data = rcar_pcie_hw_init_h1 }, + { .compatible = "renesas,pcie-rcar-gen2", .data = rcar_pcie_hw_init }, { .compatible = "renesas,pcie-r8a7790", .data = rcar_pcie_hw_init }, { .compatible = "renesas,pcie-r8a7791", .data = rcar_pcie_hw_init }, { .compatible = "renesas,pcie-r8a7795", .data = rcar_pcie_hw_init }, -- cgit v1.2.3-70-g09d2 From 845d5ca26647258fea84353152c2bde759dfab5d Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Fri, 18 Dec 2015 14:38:56 +0200 Subject: PCI: qcom: Document PCIe devicetree bindings Document Qualcomm PCIe driver devicetree bindings. Signed-off-by: Stanimir Varbanov Signed-off-by: Stanimir Varbanov Signed-off-by: Bjorn Helgaas Acked-by: Rob Herring --- .../devicetree/bindings/pci/qcom,pcie.txt | 233 +++++++++++++++++++++ 1 file changed, 233 insertions(+) create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt b/Documentation/devicetree/bindings/pci/qcom,pcie.txt new file mode 100644 index 000000000000..4059a6f89bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt @@ -0,0 +1,233 @@ +* Qualcomm PCI express root complex + +- compatible: + Usage: required + Value type: + Definition: Value should contain + - "qcom,pcie-ipq8064" for ipq8064 + - "qcom,pcie-apq8064" for apq8064 + - "qcom,pcie-apq8084" for apq8084 + +- reg: + Usage: required + Value type: + Definition: Register ranges as listed in the reg-names property + +- reg-names: + Usage: required + Value type: + Definition: Must include the following entries + - "parf" Qualcomm specific registers + - "dbi" Designware PCIe registers + - "elbi" External local bus interface registers + - "config" PCIe configuration space + +- device_type: + Usage: required + Value type: + Definition: Should be "pci". As specified in designware-pcie.txt + +- #address-cells: + Usage: required + Value type: + Definition: Should be 3. As specified in designware-pcie.txt + +- #size-cells: + Usage: required + Value type: + Definition: Should be 2. As specified in designware-pcie.txt + +- ranges: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- interrupts: + Usage: required + Value type: + Definition: MSI interrupt + +- interrupt-names: + Usage: required + Value type: + Definition: Should contain "msi" + +- #interrupt-cells: + Usage: required + Value type: + Definition: Should be 1. As specified in designware-pcie.txt + +- interrupt-map-mask: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- interrupt-map: + Usage: required + Value type: + Definition: As specified in designware-pcie.txt + +- clocks: + Usage: required + Value type: + Definition: List of phandle and clock specifier pairs as listed + in clock-names property + +- clock-names: + Usage: required + Value type: + Definition: Should contain the following entries + - "iface" Configuration AHB clock + +- clock-names: + Usage: required for ipq/apq8064 + Value type: + Definition: Should contain the following entries + - "core" Clocks the pcie hw block + - "phy" Clocks the pcie PHY block +- clock-names: + Usage: required for apq8084 + Value type: + Definition: Should contain the following entries + - "aux" Auxiliary (AUX) clock + - "bus_master" Master AXI clock + - "bus_slave" Slave AXI clock +- resets: + Usage: required + Value type: + Definition: List of phandle and reset specifier pairs as listed + in reset-names property + +- reset-names: + Usage: required for ipq/apq8064 + Value type: + Definition: Should contain the following entries + - "axi" AXI reset + - "ahb" AHB reset + - "por" POR reset + - "pci" PCI reset + - "phy" PHY reset + +- reset-names: + Usage: required for apq8084 + Value type: + Definition: Should contain the following entries + - "core" Core reset + +- power-domains: + Usage: required for apq8084 + Value type: + Definition: A phandle and power domain specifier pair to the + power domain which is responsible for collapsing + and restoring power to the peripheral + +- vdda-supply: + Usage: required + Value type: + Definition: A phandle to the core analog power supply + +- vdda_phy-supply: + Usage: required for ipq/apq8064 + Value type: + Definition: A phandle to the analog power supply for PHY + +- vdda_refclk-supply: + Usage: required for ipq/apq8064 + Value type: + Definition: A phandle to the analog power supply for IC which generates + reference clock + +- phys: + Usage: required for apq8084 + Value type: + Definition: List of phandle(s) as listed in phy-names property + +- phy-names: + Usage: required for apq8084 + Value type: + Definition: Should contain "pciephy" + +- -gpios: + Usage: optional + Value type: + Definition: List of phandle and gpio specifier pairs. Should contain + - "perst-gpios" PCIe endpoint reset signal line + - "wake-gpios" PCIe endpoint wake signal line + +* Example for ipq/apq8064 + pcie@1b500000 { + compatible = "qcom,pcie-apq8064", "qcom,pcie-ipq8064", "snps,dw-pcie"; + reg = <0x1b500000 0x1000 + 0x1b502000 0x80 + 0x1b600000 0x100 + 0x0ff00000 0x100000>; + reg-names = "dbi", "elbi", "parf", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */ + 0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */ + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc PCIE_A_CLK>, + <&gcc PCIE_H_CLK>, + <&gcc PCIE_PHY_CLK>; + clock-names = "core", "iface", "phy"; + resets = <&gcc PCIE_ACLK_RESET>, + <&gcc PCIE_HCLK_RESET>, + <&gcc PCIE_POR_RESET>, + <&gcc PCIE_PCI_RESET>, + <&gcc PCIE_PHY_RESET>; + reset-names = "axi", "ahb", "por", "pci", "phy"; + pinctrl-0 = <&pcie_pins_default>; + pinctrl-names = "default"; + }; + +* Example for apq8084 + pcie0@fc520000 { + compatible = "qcom,pcie-apq8084", "snps,dw-pcie"; + reg = <0xfc520000 0x2000>, + <0xff000000 0x1000>, + <0xff001000 0x1000>, + <0xff002000 0x2000>; + reg-names = "parf", "dbi", "elbi", "config"; + device_type = "pci"; + linux,pci-domain = <0>; + bus-range = <0x00 0xff>; + num-lanes = <1>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /* I/O */ + 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /* memory */ + interrupts = ; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ + <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ + <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ + <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ + clocks = <&gcc GCC_PCIE_0_CFG_AHB_CLK>, + <&gcc GCC_PCIE_0_MSTR_AXI_CLK>, + <&gcc GCC_PCIE_0_SLV_AXI_CLK>, + <&gcc GCC_PCIE_0_AUX_CLK>; + clock-names = "iface", "master_bus", "slave_bus", "aux"; + resets = <&gcc GCC_PCIE_0_BCR>; + reset-names = "core"; + power-domains = <&gcc PCIE0_GDSC>; + vdda-supply = <&pma8084_l3>; + phys = <&pciephy0>; + phy-names = "pciephy"; + perst-gpio = <&tlmm 70 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&pcie0_pins_default>; + pinctrl-names = "default"; + }; -- cgit v1.2.3-70-g09d2 From 5930fe4edee072d403cfbafa0aacca78587edd73 Mon Sep 17 00:00:00 2001 From: Gabriele Paoloni Date: Fri, 27 Nov 2015 01:17:05 +0800 Subject: PCI: hisi: Add support for HiSilicon Hip06 PCIe host controllers Add support for the HiSilicon Hip06 SoC. Documentation has been updated to include Hip06. Add Gabriele Paoloni as maintainer of the driver. Signed-off-by: Gabriele Paoloni Signed-off-by: Bjorn Helgaas Reviewed-by: Zhou Wang --- .../devicetree/bindings/pci/hisilicon-pcie.txt | 8 +-- MAINTAINERS | 1 + drivers/pci/host/Kconfig | 5 +- drivers/pci/host/pcie-hisi.c | 76 ++++++++++++++++++---- 4 files changed, 73 insertions(+), 17 deletions(-) (limited to 'Documentation') diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt index 17c6ed9c6059..b721beacfe4d 100644 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt @@ -1,4 +1,4 @@ -HiSilicon PCIe host bridge DT description +HiSilicon Hip05 and Hip06 PCIe host bridge DT description HiSilicon PCIe host controller is based on Designware PCI core. It shares common functions with PCIe Designware core driver and inherits @@ -7,8 +7,8 @@ Documentation/devicetree/bindings/pci/designware-pci.txt. Additional properties are described here: -Required properties: -- compatible: Should contain "hisilicon,hip05-pcie". +Required properties +- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". - reg: Should contain rc_dbi, config registers location and length. - reg-names: Must include the following entries: "rc_dbi": controller configuration registers; @@ -20,7 +20,7 @@ Optional properties: - status: Either "ok" or "disabled". - dma-coherent: Present if DMA operations are coherent. -Example: +Hip05 Example (note that Hip06 is the same except compatible): pcie@0xb0080000 { compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; diff --git a/MAINTAINERS b/MAINTAINERS index 050d0e77a2cf..f7c928cbc736 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -8240,6 +8240,7 @@ F: drivers/pci/host/pci-xgene-msi.c PCIE DRIVER FOR HISILICON M: Zhou Wang +M: Gabriele Paoloni L: linux-pci@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/pci/hisilicon-pcie.txt diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index f131ba947dc6..3f73587196c7 100644 --- a/drivers/pci/host/Kconfig +++ b/drivers/pci/host/Kconfig @@ -166,10 +166,11 @@ config PCIE_ALTERA_MSI config PCI_HISI depends on OF && ARM64 - bool "HiSilicon SoC HIP05 PCIe controller" + bool "HiSilicon Hip05 and Hip06 SoCs PCIe controllers" select PCIEPORTBUS select PCIE_DW help - Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC + Say Y here if you want PCIe controller support on HiSilicon + Hip05 and Hip06 SoCs endmenu diff --git a/drivers/pci/host/pcie-hisi.c b/drivers/pci/host/pcie-hisi.c index 35457ecd8e70..4bad6954019b 100644 --- a/drivers/pci/host/pcie-hisi.c +++ b/drivers/pci/host/pcie-hisi.c @@ -1,10 +1,11 @@ /* - * PCIe host controller driver for HiSilicon Hip05 SoC + * PCIe host controller driver for HiSilicon SoCs * * Copyright (C) 2015 HiSilicon Co., Ltd. http://www.hisilicon.com * - * Author: Zhou Wang - * Dacai Zhu + * Authors: Zhou Wang + * Dacai Zhu + * Gabriele Paoloni * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -16,21 +17,31 @@ #include #include #include +#include #include #include "pcie-designware.h" -#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818 -#define PCIE_LTSSM_LINKUP_STATE 0x11 -#define PCIE_LTSSM_STATE_MASK 0x3F +#define PCIE_LTSSM_LINKUP_STATE 0x11 +#define PCIE_LTSSM_STATE_MASK 0x3F +#define PCIE_SUBCTRL_SYS_STATE4_REG 0x6818 +#define PCIE_SYS_STATE4 0x31c +#define PCIE_HIP06_CTRL_OFF 0x1000 #define to_hisi_pcie(x) container_of(x, struct hisi_pcie, pp) +struct hisi_pcie; + +struct pcie_soc_ops { + int (*hisi_pcie_link_up)(struct hisi_pcie *pcie); +}; + struct hisi_pcie { struct regmap *subctrl; void __iomem *reg_base; u32 port_id; struct pcie_port pp; + struct pcie_soc_ops *soc_ops; }; static inline void hisi_pcie_apb_writel(struct hisi_pcie *pcie, @@ -44,7 +55,7 @@ static inline u32 hisi_pcie_apb_readl(struct hisi_pcie *pcie, u32 reg) return readl(pcie->reg_base + reg); } -/* Hip05 PCIe host only supports 32-bit config access */ +/* HipXX PCIe host only supports 32-bit config access */ static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size, u32 *val) { @@ -67,7 +78,7 @@ static int hisi_pcie_cfg_read(struct pcie_port *pp, int where, int size, return PCIBIOS_SUCCESSFUL; } -/* Hip05 PCIe host only supports 32-bit config access */ +/* HipXX PCIe host only supports 32-bit config access */ static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size, u32 val) { @@ -94,10 +105,9 @@ static int hisi_pcie_cfg_write(struct pcie_port *pp, int where, int size, return PCIBIOS_SUCCESSFUL; } -static int hisi_pcie_link_up(struct pcie_port *pp) +static int hisi_pcie_link_up_hip05(struct hisi_pcie *hisi_pcie) { u32 val; - struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp); regmap_read(hisi_pcie->subctrl, PCIE_SUBCTRL_SYS_STATE4_REG + 0x100 * hisi_pcie->port_id, &val); @@ -105,6 +115,23 @@ static int hisi_pcie_link_up(struct pcie_port *pp) return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE); } +static int hisi_pcie_link_up_hip06(struct hisi_pcie *hisi_pcie) +{ + u32 val; + + val = hisi_pcie_apb_readl(hisi_pcie, PCIE_HIP06_CTRL_OFF + + PCIE_SYS_STATE4); + + return ((val & PCIE_LTSSM_STATE_MASK) == PCIE_LTSSM_LINKUP_STATE); +} + +static int hisi_pcie_link_up(struct pcie_port *pp) +{ + struct hisi_pcie *hisi_pcie = to_hisi_pcie(pp); + + return hisi_pcie->soc_ops->hisi_pcie_link_up(hisi_pcie); +} + static struct pcie_host_ops hisi_pcie_host_ops = { .rd_own_conf = hisi_pcie_cfg_read, .wr_own_conf = hisi_pcie_cfg_write, @@ -143,7 +170,9 @@ static int __init hisi_pcie_probe(struct platform_device *pdev) { struct hisi_pcie *hisi_pcie; struct pcie_port *pp; + const struct of_device_id *match; struct resource *reg; + struct device_driver *driver; int ret; hisi_pcie = devm_kzalloc(&pdev->dev, sizeof(*hisi_pcie), GFP_KERNEL); @@ -152,6 +181,10 @@ static int __init hisi_pcie_probe(struct platform_device *pdev) pp = &hisi_pcie->pp; pp->dev = &pdev->dev; + driver = (pdev->dev).driver; + + match = of_match_device(driver->of_match_table, &pdev->dev); + hisi_pcie->soc_ops = (struct pcie_soc_ops *) match->data; hisi_pcie->subctrl = syscon_regmap_lookup_by_compatible("hisilicon,pcie-sas-subctrl"); @@ -180,11 +213,27 @@ static int __init hisi_pcie_probe(struct platform_device *pdev) return 0; } +static struct pcie_soc_ops hip05_ops = { + &hisi_pcie_link_up_hip05 +}; + +static struct pcie_soc_ops hip06_ops = { + &hisi_pcie_link_up_hip06 +}; + static const struct of_device_id hisi_pcie_of_match[] = { - {.compatible = "hisilicon,hip05-pcie",}, + { + .compatible = "hisilicon,hip05-pcie", + .data = (void *) &hip05_ops, + }, + { + .compatible = "hisilicon,hip06-pcie", + .data = (void *) &hip06_ops, + }, {}, }; + MODULE_DEVICE_TABLE(of, hisi_pcie_of_match); static struct platform_driver hisi_pcie_driver = { @@ -196,3 +245,8 @@ static struct platform_driver hisi_pcie_driver = { }; module_platform_driver(hisi_pcie_driver); + +MODULE_AUTHOR("Zhou Wang "); +MODULE_AUTHOR("Dacai Zhu "); +MODULE_AUTHOR("Gabriele Paoloni "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3-70-g09d2