From 96790f0a283976bc59f68657237293fe97b02334 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Wed, 20 Mar 2013 11:42:15 +0100 Subject: arm: zynq: Add support for system reset Do system reset via slcr registers. Signed-off-by: Michal Simek --- arch/arm/mach-zynq/slcr.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch/arm/mach-zynq/slcr.c') diff --git a/arch/arm/mach-zynq/slcr.c b/arch/arm/mach-zynq/slcr.c index f9f33496cee9..d58c9964e883 100644 --- a/arch/arm/mach-zynq/slcr.c +++ b/arch/arm/mach-zynq/slcr.c @@ -32,8 +32,35 @@ #define SLCR_UNLOCK_MAGIC 0xDF0D #define SLCR_UNLOCK 0x8 /* SCLR unlock register */ +#define SLCR_PS_RST_CTRL_OFFSET 0x200 /* PS Software Reset Control */ +#define SLCR_REBOOT_STATUS 0x258 /* PS Reboot Status */ + void __iomem *zynq_slcr_base; +/** + * zynq_slcr_system_reset - Reset the entire system. + */ +void zynq_slcr_system_reset(void) +{ + u32 reboot; + + /* + * Unlock the SLCR then reset the system. + * Note that this seems to require raw i/o + * functions or there's a lockup? + */ + writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK); + + /* + * Clear 0x0F000000 bits of reboot status register to workaround + * the FSBL not loading the bitstream after soft-reboot + * This is a temporary solution until we know more. + */ + reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS); + writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET); +} + /** * zynq_slcr_init * Returns 0 on success, negative errno otherwise. -- cgit v1.2.3-70-g09d2