From adcdd4287da33132d4a72a9bcf60183c1cab5563 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:42 +0200 Subject: MIPS: bigsur_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts bigsur_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by: Bartlomiej Zolnierkiewicz Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11128/ Signed-off-by: Ralf Baechle --- arch/mips/configs/bigsur_defconfig | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index 1cdff6b6327d..b3e7a1b61220 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -122,20 +122,20 @@ CONFIG_EEPROM_MAX6875=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_BLK_DEV_SR=m +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_ATA=y CONFIG_SATA_SIL24=y +CONFIG_PATA_CMD64X=y +CONFIG_PATA_IT8213=m CONFIG_PATA_SIL680=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_MII=y -- cgit v1.2.3-70-g09d2 From 5081f4fc32243c3ebbd95638abd3ef1a2ae1247f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:43 +0200 Subject: MIPS: capcella_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts capcella_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11129/ Signed-off-by: Ralf Baechle --- arch/mips/configs/capcella_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig index 5135dc0b950a..2924ba34a01b 100644 --- a/arch/mips/configs/capcella_defconfig +++ b/arch/mips/configs/capcella_defconfig @@ -31,9 +31,9 @@ CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_FW_LOADER=m CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_PHYLIB=m CONFIG_MARVELL_PHY=m -- cgit v1.2.3-70-g09d2 From 5c2a53a1e0ee8713b9160a52ed374cc8d8cd0c82 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:44 +0200 Subject: MIPS: e55_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts e55_defconfig to use libata PATA drivers. PS This platform still uses "ide0=base[,ctl[,irq]]" hack in its defconfig. The hack itself has been removed in 2008 and this platform should be converted to using PATA platform host driver (pata_platform) instead. Cc: Yoichi Yuasa Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Ralf Baechle --- arch/mips/configs/e55_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig index 0126e66d60cb..e94d266c4b97 100644 --- a/arch/mips/configs/e55_defconfig +++ b/arch/mips/configs/e55_defconfig @@ -14,9 +14,9 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set -- cgit v1.2.3-70-g09d2 From 1485ddcc2ffaaa801c4104b85eac95c2f32c4220 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:45 +0200 Subject: MIPS: fuloong2e_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts fuloong2e_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Wu Zhangjin Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11131/ Signed-off-by: Ralf Baechle --- arch/mips/configs/fuloong2e_defconfig | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig index a75c65da08b4..87435897fd50 100644 --- a/arch/mips/configs/fuloong2e_defconfig +++ b/arch/mips/configs/fuloong2e_defconfig @@ -34,7 +34,7 @@ CONFIG_MIPS32_N32=y CONFIG_PM=y # CONFIG_SUSPEND is not set CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="/dev/hda3" +CONFIG_PM_STD_PARTITION="/dev/sda3" CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -114,20 +114,16 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=m CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_TASK_IOCTL=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_VIA82CXXX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_PATA_VIA=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_MACVLAN=m CONFIG_VETH=m -- cgit v1.2.3-70-g09d2 From 973852fc0d1be1fa47a03c7c0a106a0667714edd Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:46 +0200 Subject: MIPS: lasat_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts lasat_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Brian Murphy Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11132/ Signed-off-by: Ralf Baechle --- arch/mips/configs/lasat_defconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig index 0179c7fa014f..e620a2c3eba4 100644 --- a/arch/mips/configs/lasat_defconfig +++ b/arch/mips/configs/lasat_defconfig @@ -35,11 +35,11 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y -- cgit v1.2.3-70-g09d2 From 7ff7a5b1bfff71a1814f3542c1bd3c8f3e08bbbe Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:47 +0200 Subject: MIPS: lemote2f_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts lemote2f_defconfig to use libata PATA drivers. PS This platform uses CS5536 chipset which (due to historical reasons) has basic support in AMD/nVidia PATA host driver and full support in a newer CS5536 PATA one (pata_cs5536). Thus most likely this platform should switch to using the latter host driver. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Huacai Chen Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11133/ Signed-off-by: Ralf Baechle --- arch/mips/configs/lemote2f_defconfig | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index 54cc3853d259..004cf52d1b7d 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -108,16 +108,11 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_TASK_IOCTL=y -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_AMD74XX=y -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_PATA_AMD=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- cgit v1.2.3-70-g09d2 From d17e465543e7689168ea2a913e67231876a668d5 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:48 +0200 Subject: MIPS: malta_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11134/ Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_defconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig index 61a4460d67d3..5afb4840aec7 100644 --- a/arch/mips/configs/malta_defconfig +++ b/arch/mips/configs/malta_defconfig @@ -241,14 +241,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y CONFIG_RAID_ATTRS=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -265,6 +262,7 @@ CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_ATA=y CONFIG_ATA_PIIX=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- cgit v1.2.3-70-g09d2 From 91c6fbabaed76ce0d85c357fe2f9e9dfc74d0640 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:49 +0200 Subject: MIPS: malta_kvm_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_kvm_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Sanjay Lal Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11135/ Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_kvm_defconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/malta_kvm_defconfig b/arch/mips/configs/malta_kvm_defconfig index d41742dd26c8..98f13879bb8f 100644 --- a/arch/mips/configs/malta_kvm_defconfig +++ b/arch/mips/configs/malta_kvm_defconfig @@ -248,17 +248,12 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y @@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- cgit v1.2.3-70-g09d2 From 5f6df05b2faf893bc119d4bf1ef2decefedd0440 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:50 +0200 Subject: MIPS: malta_kvm_guest_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_kvm_guest_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Sanjay Lal Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11136/ Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_kvm_guest_defconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/malta_kvm_guest_defconfig b/arch/mips/configs/malta_kvm_guest_defconfig index a7806e83ea0f..3b5d5913f548 100644 --- a/arch/mips/configs/malta_kvm_guest_defconfig +++ b/arch/mips/configs/malta_kvm_guest_defconfig @@ -248,17 +248,12 @@ CONFIG_ATA_OVER_ETH=m CONFIG_VIRTIO_BLK=y CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y @@ -274,6 +269,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- cgit v1.2.3-70-g09d2 From 077b649a2ffe53109c98379fe7ba2fa4fdc9a34a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:51 +0200 Subject: MIPS: malta_qemu_32r6_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts malta_qemu_32r6_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Markos Chandras Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: b.zolnierkie@samsung.com Patchwork: https://patchwork.linux-mips.org/patch/11138/ Signed-off-by: Ralf Baechle --- arch/mips/configs/malta_qemu_32r6_defconfig | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/malta_qemu_32r6_defconfig b/arch/mips/configs/malta_qemu_32r6_defconfig index 4bce1f8ebe98..7f50dd67aa8d 100644 --- a/arch/mips/configs/malta_qemu_32r6_defconfig +++ b/arch/mips/configs/malta_qemu_32r6_defconfig @@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set -- cgit v1.2.3-70-g09d2 From 255faa84276ae8c42a660af3ad6e089ac89d22b4 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:52 +0200 Subject: MIPS: maltaaprp_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaaprp_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: b.zolnierkie@samsung.com Patchwork: https://patchwork.linux-mips.org/patch/11137/ Signed-off-by: Ralf Baechle --- arch/mips/configs/maltaaprp_defconfig | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/maltaaprp_defconfig b/arch/mips/configs/maltaaprp_defconfig index fb042ce86b4b..a9d433a17fcf 100644 --- a/arch/mips/configs/maltaaprp_defconfig +++ b/arch/mips/configs/maltaaprp_defconfig @@ -81,15 +81,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set -- cgit v1.2.3-70-g09d2 From b0b98ad9b59f2a4c011d4b1ff40efa663b2b4e43 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:53 +0200 Subject: MIPS: maltasmvp_eva_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltasmvp_eva_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11139/ Signed-off-by: Ralf Baechle --- arch/mips/configs/maltasmvp_eva_defconfig | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/maltasmvp_eva_defconfig b/arch/mips/configs/maltasmvp_eva_defconfig index c83338a39917..2774ef064505 100644 --- a/arch/mips/configs/maltasmvp_eva_defconfig +++ b/arch/mips/configs/maltasmvp_eva_defconfig @@ -85,15 +85,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set -- cgit v1.2.3-70-g09d2 From 93c7e664ff6af49c05d1b78b54aa6f02e1ba88f6 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:54 +0200 Subject: MIPS: maltaup_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_defconfig to use libata PATA drivers. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11142/ Signed-off-by: Ralf Baechle --- arch/mips/configs/maltaup_defconfig | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/maltaup_defconfig b/arch/mips/configs/maltaup_defconfig index 62344648eb7a..9bbd2218f0bf 100644 --- a/arch/mips/configs/maltaup_defconfig +++ b/arch/mips/configs/maltaup_defconfig @@ -80,15 +80,14 @@ CONFIG_NET_CLS_IND=y CONFIG_DEVTMPFS=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_IDE=y -# CONFIG_IDE_PROC_FS is not set -# CONFIG_IDEPCI_PCIBUS_ORDER is not set -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_LOWLEVEL is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y CONFIG_NETDEVICES=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_NET_VENDOR_ADAPTEC is not set -- cgit v1.2.3-70-g09d2 From 1b7d801263522d9e1a122a6913c42acb5bf6c2c0 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:55 +0200 Subject: MIPS: maltaup_xpa_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts maltaup_xpa_defconfig to use libata PATA drivers (tc86c001 IDE host driver has no corresponding libata driver yet so it is not converted). Signed-off-by: Bartlomiej Zolnierkiewicz Cc: Paul Burton Cc: Markos Chandras Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11140/ Signed-off-by: Ralf Baechle --- arch/mips/configs/maltaup_xpa_defconfig | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/maltaup_xpa_defconfig b/arch/mips/configs/maltaup_xpa_defconfig index c388bff09148..732215732751 100644 --- a/arch/mips/configs/maltaup_xpa_defconfig +++ b/arch/mips/configs/maltaup_xpa_defconfig @@ -244,17 +244,12 @@ CONFIG_CDROM_PKTCDVD=m CONFIG_ATA_OVER_ETH=m CONFIG_IDE=y CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_BLK_DEV_IT8213=m CONFIG_BLK_DEV_TC86C001=m CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_SCSI_CONSTANTS=y @@ -269,6 +264,13 @@ CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_RESET_DELAY_MS=15000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_PATA_IT8213=m +CONFIG_PATA_OLDPIIX=y +CONFIG_PATA_MPIIX=y +CONFIG_ATA_GENERIC=y +CONFIG_PATA_LEGACY=y CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m -- cgit v1.2.3-70-g09d2 From 22773aa9b95657f0adc2b5342428d9da7a6d5d02 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 14 Sep 2015 17:51:56 +0200 Subject: MIPS: mpc30x_defconfig: Convert to use libata PATA drivers IDE subsystem has been deprecated since 2009 and the majority (if not all) of Linux distributions have switched to use libata for ATA support exclusively. However there are still some users (mostly old or/and embedded non-x86 systems) that have not converted from using IDE subsystem to libata PATA drivers. This doesn't seem to be good thing in the long-term for Linux as while there is less and less PATA systems left in use: * testing efforts are divided between two subsystems * having duplicate drivers for same hardware confuses users This patch converts mpc30x_defconfig to use libata PATA drivers. PS This platform still uses "ide0=base[,ctl[,irq]]" hack in its defconfig. The hack itself has been removed in 2008 and this platform should be converted to using PATA platform host driver (pata_platform) instead. Signed-off-by: Bartlomiej Zolnierkiewicz Cc: linux-mips@linux-mips.org Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11141/ Signed-off-by: Ralf Baechle --- arch/mips/configs/mpc30x_defconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig index 7a346605c498..a2c045fab6c5 100644 --- a/arch/mips/configs/mpc30x_defconfig +++ b/arch/mips/configs/mpc30x_defconfig @@ -27,9 +27,9 @@ CONFIG_INET_XFRM_MODE_BEET=m CONFIG_NETWORK_SECMARK=y CONFIG_CONNECTOR=m CONFIG_ATA_OVER_ETH=m -# CONFIG_MISC_DEVICES is not set -CONFIG_IDE=y -CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_LEGACY=y CONFIG_NETDEVICES=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set -- cgit v1.2.3-70-g09d2 From 834cc15b443840d94e225bb0ff0604b1c1f6f2e1 Mon Sep 17 00:00:00 2001 From: Zubair Lutfullah Kakakhel Date: Mon, 26 Oct 2015 11:30:57 +0000 Subject: MIPS: Add xilfpga defconfig Add defconfig for MIPSfpga Signed-off-by: Zubair Lutfullah Kakakhel Cc: robh+dt@kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11363/ Signed-off-by: Ralf Baechle --- arch/mips/configs/xilfpga_defconfig | 40 +++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 arch/mips/configs/xilfpga_defconfig (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/xilfpga_defconfig b/arch/mips/configs/xilfpga_defconfig new file mode 100644 index 000000000000..ed1dce348320 --- /dev/null +++ b/arch/mips/configs/xilfpga_defconfig @@ -0,0 +1,40 @@ +CONFIG_MACH_XILFPGA=y +# CONFIG_COMPACTION is not set +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_EMBEDDED=y +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_BLOCK is not set +# CONFIG_SUSPEND is not set +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_ALLOW_DEV_COREDUMP is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_HW_RANDOM is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MIPS_PLATFORM_DEVICES is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_PROC_PAGE_MONITOR is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PANIC_ON_OOPS=y +# CONFIG_SCHED_DEBUG is not set +# CONFIG_FTRACE is not set +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200" -- cgit v1.2.3-70-g09d2 From 997effa0c198ab3b7d4b62cf443d797e4e0bf5ff Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 16 Oct 2015 12:51:58 -0700 Subject: MIPS: BMIPS: Enable GZIP ramdisk and timed printks Update bmips_be_defconfig and bmips_stb_defconfig to have GZIP ramdisk support enabled by default as well was timed printks. Signed-off-by: Florian Fainelli Reviewed-by: Kevin Cernekee Reviewed-by: Dragan Stancevic Cc: linux-mips@linux-mips.org Cc: blogic@openwrt.org Cc: jogo@openwrt.org Patchwork: https://patchwork.linux-mips.org/patch/11307/ Signed-off-by: Ralf Baechle --- arch/mips/configs/bmips_be_defconfig | 3 ++- arch/mips/configs/bmips_stb_defconfig | 3 ++- 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'arch/mips/configs') diff --git a/arch/mips/configs/bmips_be_defconfig b/arch/mips/configs/bmips_be_defconfig index f5585c8f35ad..24dcb90b0f64 100644 --- a/arch/mips/configs/bmips_be_defconfig +++ b/arch/mips/configs/bmips_be_defconfig @@ -8,7 +8,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y # CONFIG_SWAP is not set CONFIG_NO_HZ=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_GZIP is not set +CONFIG_RD_GZIP=y CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set @@ -33,6 +33,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PRINTK_TIME=y CONFIG_BRCMSTB_GISB_ARB=y CONFIG_MTD=y CONFIG_MTD_CFI=y diff --git a/arch/mips/configs/bmips_stb_defconfig b/arch/mips/configs/bmips_stb_defconfig index 400a47ec1ef1..4eb5d6e9cf8f 100644 --- a/arch/mips/configs/bmips_stb_defconfig +++ b/arch/mips/configs/bmips_stb_defconfig @@ -9,7 +9,7 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y # CONFIG_SWAP is not set CONFIG_NO_HZ=y CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_GZIP is not set +CONFIG_RD_GZIP=y CONFIG_EXPERT=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set @@ -34,6 +34,7 @@ CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_PRINTK_TIME=y CONFIG_BRCMSTB_GISB_ARB=y CONFIG_MTD=y CONFIG_MTD_CFI=y -- cgit v1.2.3-70-g09d2