From 1c4db8e82808a804751be906e8c14bbe0a264a9c Mon Sep 17 00:00:00 2001
From: Phil Sutter <n0-1@freewrt.org>
Date: Mon, 19 Jan 2009 23:42:54 +0100
Subject: MIPS: RB532: Simplify dev3 init

As rb532_dev3_ctl_res is not used by any platform device, it can be dropped
when not used for holding the physical address of the device 3 controller.

Also a size of one byte should suffice when ioremapping the physical
address mentioned above, as only a single byte is being read from and
written to it.

Signed-off-by: Phil Sutter <n0-1@freewrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---
 arch/mips/rb532/devices.c | 14 ++------------
 1 file changed, 2 insertions(+), 12 deletions(-)

(limited to 'arch/mips')

diff --git a/arch/mips/rb532/devices.c b/arch/mips/rb532/devices.c
index 1a0209eca789..4a5f05b662ae 100644
--- a/arch/mips/rb532/devices.c
+++ b/arch/mips/rb532/devices.c
@@ -63,13 +63,6 @@ unsigned char get_latch_u5(void)
 }
 EXPORT_SYMBOL(get_latch_u5);
 
-static struct resource rb532_dev3_ctl_res[] = {
-	{
-		.name	= "dev3_ctl",
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
 static struct resource korina_dev0_res[] = {
 	{
 		.name = "korina_regs",
@@ -342,11 +335,8 @@ static int __init plat_setup_devices(void)
 	nand_slot0_res[0].start = readl(IDT434_REG_BASE + DEV2BASE);
 	nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
 
-	/* Read the third (multi purpose) resources from the DC */
-	rb532_dev3_ctl_res[0].start = readl(IDT434_REG_BASE + DEV3BASE);
-	rb532_dev3_ctl_res[0].end = rb532_dev3_ctl_res[0].start + 0x1000;
-
-	dev3.base = ioremap_nocache(rb532_dev3_ctl_res[0].start, 0x1000);
+	/* Read and map device controller 3 */
+	dev3.base = ioremap_nocache(readl(IDT434_REG_BASE + DEV3BASE), 1);
 
 	if (!dev3.base) {
 		printk(KERN_ERR "rb532: cannot remap device controller 3\n");
-- 
cgit v1.2.3-70-g09d2