From 22374fbedb2ce03ef81323b3f7ceb3fa29344aa6 Mon Sep 17 00:00:00 2001 From: Robert Baldyga Date: Mon, 29 Jun 2015 15:22:34 +0200 Subject: ARM: dts: Add DMA support for serial ports in exynos4 Enable DMA transfers for serial ports. Signed-off-by: Robert Baldyga Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 98c0a368b777..3184e10f260a 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -431,6 +431,8 @@ interrupts = <0 52 0>; clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 15>, <&pdma0 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -440,6 +442,8 @@ interrupts = <0 53 0>; clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 15>, <&pdma1 16>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -449,6 +453,8 @@ interrupts = <0 54 0>; clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma0 17>, <&pdma0 18>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -458,6 +464,8 @@ interrupts = <0 55 0>; clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>; clock-names = "uart", "clk_uart_baud0"; + dmas = <&pdma1 17>, <&pdma1 18>; + dma-names = "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From fec794c7717eaf724542c56fda5f7090f23cefab Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 4 Aug 2015 23:30:09 +0200 Subject: ARM: dts: sun4i: Enable otg in host only mode on Jesurun Q5 The Jesurun Q5 has the musb hooked up to an usb-a receptacle, enable it in host-only mode. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts index dc2f2aeaff07..7afc7a64eef1 100644 --- a/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts +++ b/arch/arm/boot/dts/sun4i-a10-jesurun-q5.dts @@ -156,6 +156,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { emac_power_pin_q5: emac_power_pin@0 { allwinner,pins = "PH19"; @@ -172,6 +176,11 @@ }; }; +®_usb0_vbus { + regulator-boot-on; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -186,7 +195,13 @@ status = "okay"; }; +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + &usbphy { + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From bcbf506d777d2627cb8f68755816fab04eb8b852 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 8 Aug 2015 17:38:54 +0200 Subject: ARM: dts: sun4i: Enable i2c1 and i2c2 on the Chuwi V7-CW0825 tablet i2c1 has a freescale mma7660 accelerometer connected to it at addr 0x4c, i2c2 has a ft5x touchscreen connected to it at addr 0x38. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts index 143056872650..53660894ea95 100644 --- a/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts +++ b/arch/arm/boot/dts/sun4i-a10-chuwi-v7-cw0825.dts @@ -78,6 +78,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_vcc3v0>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 9ff5052f7561068207c2b0e7590ad8ca5765f2cc Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Sun, 9 Aug 2015 20:22:58 +0200 Subject: ARM: dts: sunxi: enable otg port on the sun7i-a20-olinuxino-lime2 This patch enables the musb-otg USB controller on the Lime2. The Lime2 differs from the Lime1 series in pins used for usb0 power. Tested on a OlinuXino Lime2-4GB. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 41 +++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8acff78272b7..913032f4fa47 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -190,6 +190,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 { allwinner,pins = "PC3"; @@ -204,6 +208,27 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_lime2: usb0_vbus_pin@0 { + allwinner,pins = "PC17"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_ahci_5v { @@ -212,6 +237,12 @@ status = "okay"; }; +®_usb0_vbus { + pinctrl-0 = <&usb0_vbus_pin_lime2>; + gpio = <&pio 2 17 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -226,7 +257,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 3f37e01852a06faf1d5fed30eaee5cae942fc9d5 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 9 Aug 2015 01:08:21 +0300 Subject: ARM: shmobile: r8a7794: add GPIO clocks Describe the GPIO clocks in the R8A7794 device tree. Based on the original patch by Koji Matsuoka . Signed-off-by: Sergei Shtylyov Acked-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 97c8e9ace5eb..b6db773b9e55 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -749,16 +749,22 @@ mstp9_clks: mstp9_clks@e6150994 { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; - clocks = <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, - <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; + clocks = <&cp_clk>, <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cp_clk>, <&cp_clk>, <&cp_clk>, + <&cpg_clocks R8A7794_CLK_QSPI>, <&hp_clk>, <&hp_clk>, + <&hp_clk>, <&hp_clk>, <&hp_clk>, <&hp_clk>; #clock-cells = <1>; - clock-indices = < - R8A7794_CLK_QSPI_MOD R8A7794_CLK_I2C5 R8A7794_CLK_I2C4 - R8A7794_CLK_I2C3 R8A7794_CLK_I2C2 R8A7794_CLK_I2C1 - R8A7794_CLK_I2C0 - >; + clock-indices = ; clock-output-names = - "qspi_mod", "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; + "gpio6", "gpio5", "gpio4", "gpio3", "gpio2", + "gpio1", "gpio0", "qspi_mod", + "i2c5", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks"; -- cgit v1.2.3-70-g09d2 From e8f5de3bea9e01fd1390d64bc915a11df919b3fe Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 9 Aug 2015 01:09:31 +0300 Subject: ARM: shmobile: r8a7794: add GPIO DT support Describe GPIO[0-6] controllers in the R8A7794 device tree. Based on original patch by Hisashi Nakamura . Signed-off-by: Sergei Shtylyov Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 91 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 91 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index b6db773b9e55..e9fab31e0709 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -50,6 +50,97 @@ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO0>; + power-domains = <&cpg_clocks>; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO1>; + power-domains = <&cpg_clocks>; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO2>; + power-domains = <&cpg_clocks>; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO3>; + power-domains = <&cpg_clocks>; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO4>; + power-domains = <&cpg_clocks>; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 28>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO5>; + power-domains = <&cpg_clocks>; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7794", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 26>; + #interrupt-cells = <2>; + interrupt-controller; + clocks = <&mstp9_clks R8A7794_CLK_GPIO6>; + power-domains = <&cpg_clocks>; + }; + cmt0: timer@ffca0000 { compatible = "renesas,cmt-48-gen2"; reg = <0 0xffca0000 0 0x1004>; -- cgit v1.2.3-70-g09d2 From 740b4a9f07fe73b5ccd2bc3dc365dc359e1a332d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 11 Aug 2015 00:59:24 +0300 Subject: ARM: shmobile: r8a7794: add QSPI DT support Define the generic R8A7794 part of the QSPI device node. Based on original patch by Hisashi Nakamura . Signed-off-by: Sergei Shtylyov Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index e9fab31e0709..e0f32ede2181 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -19,6 +19,10 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + spi0 = &qspi; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -537,6 +541,20 @@ status = "disabled"; }; + qspi: spi@e6b10000 { + compatible = "renesas,qspi-r8a7794", "renesas,qspi"; + reg = <0 0xe6b10000 0 0x2c>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; + power-domains = <&cpg_clocks>; + num-cs = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From 0ebdbc505b620ab4397c3105d36a5383fb16b151 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 11 Aug 2015 01:00:35 +0300 Subject: ARM: shmobile: silk: add QSPI DT support Define the SILK board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and MTD partitions on it. Based on the original patch by Vladimir Barinov . Signed-off-by: Sergei Shtylyov Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 40 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index d4dd5a30ccdf..f49bc00738a3 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -65,6 +65,11 @@ renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; }; + + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; }; &scif2 { @@ -100,3 +105,38 @@ non-removable; status = "okay"; }; + +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-cpol; + spi-cpha; + m25p,fast-read; + + partition@0 { + label = "loader"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 8025e3ff4ca972a0ca2aa898562670a767f79889 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Fri, 7 Aug 2015 11:45:33 +0900 Subject: ARM: shmobile: marzen: Board specific serial port order Convert Marzen to use board-specific serial0 and serial1 instead of the older shared SoC-specific SCIF index. Signed-off-by: Magnus Damm Acked-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7779-marzen.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index 20afea6f06ef..fe396c8d58db 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -19,12 +19,12 @@ compatible = "renesas,marzen", "renesas,r8a7779"; aliases { - serial2 = &scif2; - serial4 = &scif4; + serial0 = &scif2; + serial1 = &scif4; }; chosen { - bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "ignore_loglevel root=/dev/nfs ip=on"; stdout-path = &scif2; }; -- cgit v1.2.3-70-g09d2 From 755252d0e502627df6ddabbb2d628705bc256497 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Mon, 6 Jul 2015 12:55:32 +0200 Subject: ARM: shmobile: kzm9g dts: Use adxl345-specific compatible property Replace the deprecated generic "adi,adxl34x" compatible value by the adxl345-specific "adi,adxl345" value, cfr. commit e465bf6fc55d5ce2 ("DT: i2c: Deprecate adi,adxl34x compatible string"). Signed-off-by: Geert Uytterhoeven Acked-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/sh73a0-kzm9g.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 24b4cd24dceb..7fc5602810ad 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -206,7 +206,7 @@ }; accelerometer@1d { - compatible = "adi,adxl34x"; + compatible = "adi,adxl345"; reg = <0x1d>; interrupt-parent = <&irqpin3>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH>, -- cgit v1.2.3-70-g09d2 From 5428521ba123dddda4d2ac9ab19d173b692a8acb Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 20 Aug 2015 01:00:09 +0300 Subject: ARM: shmobile: r8a7794: add I2C DT support Define the generic R8A7794 parts of the I2C[0-5] device nodes. Based on the original patch by Koji Matsuoka . Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 73 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index e0f32ede2181..7384db2a3992 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -20,6 +20,12 @@ #size-cells = <2>; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; spi0 = &qspi; }; @@ -502,6 +508,73 @@ status = "disabled"; }; + /* The memory map in the User's Manual maps the cores to bus numbers */ + i2c0: i2c@e6508000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6508000 0 0x40>; + interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C0>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e6518000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6518000 0 0x40>; + interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C1>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e6530000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6530000 0 0x40>; + interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C2>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e6540000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6540000 0 0x40>; + interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C3>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e6520000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6520000 0 0x40>; + interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C4>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e6528000 { + compatible = "renesas,i2c-r8a7794"; + reg = <0 0xe6528000 0 0x40>; + interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp9_clks R8A7794_CLK_I2C5>; + power-domains = <&cpg_clocks>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,mmcif-r8a7794", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; -- cgit v1.2.3-70-g09d2 From fa070791c1e7df91ca07fc7c9a431fac0d7d2832 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 20 Aug 2015 01:05:02 +0300 Subject: ARM: shmobile: silk: add I2C1 DT support Define the SILK board dependent part of the I2C1 device node. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index f49bc00738a3..3f808724106e 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -61,6 +61,11 @@ renesas,function = "intc"; }; + i2c1_pins: i2c1 { + renesas,groups = "i2c1"; + renesas,function = "i2c1"; + }; + mmcif0_pins: mmcif0 { renesas,groups = "mmc_data8", "mmc_ctrl"; renesas,function = "mmc"; @@ -95,6 +100,14 @@ }; }; +&i2c1 { + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + &mmcif0 { pinctrl-0 = <&mmcif0_pins>; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From 1afe77ca7846489fff3d1675b82bd2116a56474a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 20 Aug 2015 01:22:24 +0300 Subject: ARM: shmobile: r8a7794: add VIN DT support Define the generic R8A7794 part of the VIN[01] device nodes. Add aliases for the VIN[01] device nodes. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 7384db2a3992..e54f3dea2d70 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -27,6 +27,8 @@ i2c4 = &i2c4; i2c5 = &i2c5; spi0 = &qspi; + vin0 = &vin0; + vin1 = &vin1; }; cpus { @@ -628,6 +630,24 @@ status = "disabled"; }; + vin0: video@e6ef0000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN0>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + + vin1: video@e6ef1000 { + compatible = "renesas,vin-r8a7794"; + reg = <0 0xe6ef1000 0 0x1000>; + interrupts = <0 189 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp8_clks R8A7794_CLK_VIN1>; + power-domains = <&cpg_clocks>; + status = "disabled"; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From 8614daf299cbab2bcada922e727fdc9ad45b2412 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 20 Aug 2015 01:24:47 +0300 Subject: ARM: shmobile: silk: add VIN0/ADV7180 DT support Define the SILK board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C1 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. Based on the Henninger VIN0/ADV8170 device tree patch by myself. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 3f808724106e..bb0a22423dc4 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -75,6 +75,11 @@ renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif2 { @@ -106,6 +111,19 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &mmcif0 { @@ -153,3 +171,20 @@ }; }; }; + +/* composite video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From c19c84ff3ab1280894bb2cdd99027f751922e2ba Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 20 Aug 2015 03:09:30 +0000 Subject: ARM: shmobile: koelsch: use CCF for audio clock Because of historical reason, audio clock didn't use CCF. Let's use it now. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-koelsch.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index dc158845afdc..fc44ea361a4b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -242,6 +242,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -255,7 +262,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; -- cgit v1.2.3-70-g09d2 From 6bc651afec2dba4d3e40901a2c5cfc88ad35d97a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 20 Aug 2015 03:09:52 +0000 Subject: ARM: shmobile: lager: use CCF for audio clock Because of historical reason, audio clock didn't use CCF. Let's use it now. Signed-off-by: Kuninori Morimoto Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 37dec5269491..6f5d7f50d5ca 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -174,6 +174,13 @@ 1800000 0>; }; + audio_clock: clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <11289600>; + clock-output-names = "audio_clock"; + }; + rsnd_ak4643: sound { compatible = "simple-audio-card"; @@ -187,7 +194,7 @@ sndcodec: simple-audio-card,codec { sound-dai = <&ak4643>; - system-clock-frequency = <11289600>; + clocks = <&audio_clock>; }; }; -- cgit v1.2.3-70-g09d2 From 4bc4a2051abe12e6e7521cbabac0048096243094 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Aug 2015 08:27:56 +0000 Subject: ARM: shmobile: r8a7790: tidyup SSI resource region Signed-off-by: Kuninori Morimoto Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index a0b2a79cbfbd..ae5eb281d43a 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -1599,7 +1599,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; -- cgit v1.2.3-70-g09d2 From 8c3f903bd362328aac997aba1adfea59e337918a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 24 Aug 2015 08:28:17 +0000 Subject: ARM: shmobile: r8a7791: tidyup SSI resource region Signed-off-by: Kuninori Morimoto Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 831525dd39a6..3b8e26dde36d 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1649,7 +1649,7 @@ reg = <0 0xec500000 0 0x1000>, /* SCU */ <0 0xec5a0000 0 0x100>, /* ADG */ <0 0xec540000 0 0x1000>, /* SSIU */ - <0 0xec541000 0 0x1280>, /* SSI */ + <0 0xec541000 0 0x280>, /* SSI */ <0 0xec740000 0 0x200>; /* Audio DMAC peri peri*/ reg-names = "scu", "adg", "ssiu", "ssi", "audmapp"; -- cgit v1.2.3-70-g09d2 From 23640ff2eff0dec2016dd097b1b04c817a4ffd3f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 25 Aug 2015 07:14:50 +0000 Subject: ARM: shmobile: r8a7778: tidyup SSI resource region Signed-off-by: Kuninori Morimoto Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7778.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 4b1fa9f42ad5..4f8e07811746 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -239,7 +239,7 @@ #sound-dai-cells = <1>; compatible = "renesas,rcar_sound-r8a7778", "renesas,rcar_sound-gen1"; reg = <0xffd90000 0x1000>, /* SRU */ - <0xffd91000 0x1240>, /* SSI */ + <0xffd91000 0x240>, /* SSI */ <0xfffe0000 0x24>; /* ADG */ clocks = <&mstp3_clks R8A7778_CLK_SSI8>, <&mstp3_clks R8A7778_CLK_SSI7>, -- cgit v1.2.3-70-g09d2 From 535118cac9e0705bf58de0604060f644bee7472d Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 9 Sep 2015 19:48:19 +0200 Subject: ARM: shmobile: r8a7790: lager: add pinmux for iic0 It seems we used to rely on the default pinmux setting of this HW, but currently we need to explicitly set the pinmux to access this bus. It is better style, too. Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7790-lager.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 6f5d7f50d5ca..c553abd711ee 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -342,6 +342,11 @@ renesas,function = "msiof1"; }; + iic0_pins: iic0 { + renesas,groups = "iic0"; + renesas,function = "iic0"; + }; + iic1_pins: iic1 { renesas,groups = "iic1"; renesas,function = "iic1"; @@ -517,6 +522,8 @@ &iic0 { status = "okay"; + pinctrl-0 = <&iic0_pins>; + pinctrl-names = "default"; }; &iic1 { -- cgit v1.2.3-70-g09d2 From 7b2e987de20781ce74c160a59dbf6a2c06983794 Mon Sep 17 00:00:00 2001 From: Jon Mason Date: Mon, 31 Aug 2015 19:48:53 -0400 Subject: ARM: NSP: add minimal Northstar Plus device tree Add a very minimalistic set of Northstar Plus Device Tree files which describes the SoC and the BCM958625 implementation. The perpherials described are: ARM Cortex A9 CPU 2 8250 UARTs ARM GIC PL310 L2 Cache ARM A9 Global timer Signed-off-by: Kapil Hali Signed-off-by: Jon Mason Reviewed-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/bcm-nsp.dtsi | 119 +++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/bcm958625k.dts | 57 +++++++++++++++++++ 3 files changed, 178 insertions(+) create mode 100644 arch/arm/boot/dts/bcm-nsp.dtsi create mode 100644 arch/arm/boot/dts/bcm958625k.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..7b94c497983a 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -83,6 +83,8 @@ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm28155-ap.dtb \ bcm21664-garnet.dtb +dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb \ diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi new file mode 100644 index 000000000000..58aca277e4a7 --- /dev/null +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -0,0 +1,119 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include + +#include "skeleton.dtsi" + +/ { + compatible = "brcm,nsp"; + model = "Broadcom Northstar Plus SoC"; + interrupt-parent = <&gic>; + + mpcore { + compatible = "simple-bus"; + ranges = <0x00000000 0x19020000 0x00003000>; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; + reg = <0x0>; + }; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x2000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@19021000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x1000 0x1000>, + <0x0100 0x100>; + }; + + timer@19020200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x0200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + periph_clk: periph_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <500000000>; + }; + }; + + axi { + compatible = "simple-bus"; + ranges = <0x00000000 0x18000000 0x00001000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@18000300 { + compatible = "ns16550a"; + reg = <0x0300 0x100>; + interrupts = ; + clock-frequency = <62499840>; + status = "disabled"; + }; + + uart1: serial@18000400 { + compatible = "ns16550a"; + reg = <0x0400 0x100>; + interrupts = ; + clock-frequency = <62499840>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts new file mode 100644 index 000000000000..16303dbd35df --- /dev/null +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -0,0 +1,57 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" + +/ { + model = "NorthStar Plus SVK (BCM958625K)"; + compatible = "brcm,bcm58625", "brcm,nsp"; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From bfae737540fd2647afb55dfb480964042819b751 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Wed, 26 Aug 2015 16:13:22 +0200 Subject: ARM: BCM5301X: Add DT for Netgear R7000 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm4709-netgear-r7000.dts | 106 ++++++++++++++++++++++++++++ 2 files changed, 107 insertions(+) create mode 100644 arch/arm/boot/dts/bcm4709-netgear-r7000.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7b94c497983a..1e9eecf1a731 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -72,6 +72,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm47081-buffalo-wzr-900dhp.dtb \ bcm4709-asus-rt-ac87u.dtb \ bcm4709-buffalo-wxr-1900dhp.dtb \ + bcm4709-netgear-r7000.dtb \ bcm4709-netgear-r8000.dtb dtb-$(CONFIG_ARCH_BCM_63XX) += \ bcm963138dvt.dtb diff --git a/arch/arm/boot/dts/bcm4709-netgear-r7000.dts b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts new file mode 100644 index 000000000000..a22ed144040b --- /dev/null +++ b/arch/arm/boot/dts/bcm4709-netgear-r7000.dts @@ -0,0 +1,106 @@ +/* + * Broadcom BCM470X / BCM5301X ARM platform code. + * DTS for Netgear R7000 + * + * Copyright (C) 2015 Rafał Miłecki + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +/dts-v1/; + +#include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" + +/ { + compatible = "netgear,r7000", "brcm,bcm4709", "brcm,bcm4708"; + model = "Netgear R7000"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory { + reg = <0x00000000 0x08000000>; + }; + + leds { + compatible = "gpio-leds"; + + power-white { + label = "bcm53xx:white:power"; + gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + power-amber { + label = "bcm53xx:amber:power"; + gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 5ghz { + label = "bcm53xx:white:5ghz"; + gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + 2ghz { + label = "bcm53xx:white:2ghz"; + gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + wps { + label = "bcm53xx:white:wps"; + gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + wireless { + label = "bcm53xx:white:wireless"; + gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-off"; + }; + + usb3 { + label = "bcm53xx:white:usb3"; + gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + + usb2 { + label = "bcm53xx:white:usb2"; + gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + wps { + label = "WPS"; + linux,code = ; + gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>; + }; + + rfkill { + label = "WiFi"; + linux,code = ; + gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>; + }; + + restart { + label = "Reset"; + linux,code = ; + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&uart0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From bb1d8fba19654be3a92cf40a4c67e64ec7d4fc8f Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 12 Sep 2015 13:17:36 +0200 Subject: ARM: BCM5301X: add NAND flash chip description for Asus RT-AC87U The NAND flash chip description were not imported for the Asus RT-AC87U dts file when this was done for all the other dts files, because these patches were send in parallel. This adds a missing NAND flash chip description to this patch: commit 9faa5960eef3204cae6637b530f5e23e53b5a9ef Author: Hauke Mehrtens Date: Fri May 29 23:39:47 2015 +0200 ARM: BCM5301X: add NAND flash chip description Signed-off-by: Hauke Mehrtens Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts index aedf3c426e1f..8ade7def2e8a 100644 --- a/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +++ b/arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "bcm4708.dtsi" +#include "bcm5301x-nand-cs0-bch8.dtsi" / { compatible = "asus,rt-ac87u", "brcm,bcm4709", "brcm,bcm4708"; -- cgit v1.2.3-70-g09d2 From aca770fb4f9a88434e77b922743e5010a43f73d1 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Thu, 18 Jun 2015 17:11:36 -0700 Subject: ARM: dts: brcmstb: add BCM7445 system PM DT nodes Need the aon-ctrl, boot SRAM, and memory_controller descriptions. Signed-off-by: Brian Norris [florian: remove wake-timer, aon-pm-l2-intc duplicate] Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm7445.dtsi | 84 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 84 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi index 3b6b17560687..4791321969b3 100644 --- a/arch/arm/boot/dts/bcm7445.dtsi +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -143,6 +143,12 @@ brcm,irq-can-wake; }; + aon-ctrl@410000 { + compatible = "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x200>, <0x410200 0x400>; + reg-names = "aon-ctrl", "aon-sram"; + }; + nand: nand@3e2800 { status = "disabled"; #address-cells = <1>; @@ -219,6 +225,84 @@ }; + memory_controllers { + compatible = "simple-bus"; + ranges = <0x0 0x0 0xf1100000 0x200000>; + #address-cells = <1>; + #size-cells = <1>; + + memc@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@1 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x80000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + + memc@2 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x100000 0x80000>; + + memc-ddr@2000 { + compatible = "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x800>; + }; + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v240.1"; + reg = <0x6000 0x21c>; + }; + + shimphy@8000 { + compatible = "brcm,brcmstb-ddr-shimphy-v1.0"; + reg = <0x8000 0xe4>; + }; + }; + }; + + sram@ffe00000 { + compatible = "brcm,boot-sram", "mmio-sram"; + reg = <0x0 0xffe00000 0x0 0x10000>; + }; + smpboot { compatible = "brcm,brcmstb-smpboot"; syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; -- cgit v1.2.3-70-g09d2 From 9a0baee960a718b2fde249b7d9197641fb8eb08d Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Wed, 3 Jun 2015 12:43:41 +0100 Subject: ARM: tegra: Enable CPUFreq support for Tegra124 Chromebooks Add the device-tree DFLL clock node and CPU regulator phandle for Tegra124 Chromebooks to enable CPUFreq support on these boards. Signed-off-by: Jon Hunter Reviewed-by: Tomeu Vizoso Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124-nyan.dtsi | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124-nyan.dtsi b/arch/arm/boot/dts/tegra124-nyan.dtsi index a9aec23e06f2..40c23a0b7cfc 100644 --- a/arch/arm/boot/dts/tegra124-nyan.dtsi +++ b/arch/arm/boot/dts/tegra124-nyan.dtsi @@ -159,7 +159,7 @@ vin-ldo9-10-supply = <&vdd_5v0_sys>; vin-ldo11-supply = <&vdd_3v3_run>; - sd0 { + vdd_cpu: sd0 { regulator-name = "+VDD_CPU_AP"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; @@ -397,6 +397,13 @@ non-removable; }; + /* CPU DFLL clock */ + clock@0,70110000 { + status = "okay"; + vdd-cpu-supply = <&vdd_cpu>; + nvidia,i2c-fs-rate = <400000>; + }; + ahub@0,70300000 { i2s@0,70301100 { status = "okay"; @@ -487,6 +494,12 @@ }; }; + cpus { + cpu@0 { + vdd-cpu-supply = <&vdd_cpu>; + }; + }; + gpio-keys { compatible = "gpio-keys"; -- cgit v1.2.3-70-g09d2 From d8b316b2509f224308e851036653364c22222c61 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Thu, 27 Aug 2015 11:44:48 +0200 Subject: ARM: tegra: Whitespace clean-up for Tegra20/30/124 There were a few cases of eight spaces being used instead of a tab character plus one case of using two spaces after an equal sign instead of just one which this patch fixes. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 2 +- arch/arm/boot/dts/tegra20.dtsi | 4 ++-- arch/arm/boot/dts/tegra30.dtsi | 10 +++++----- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 1e204a6de12c..a5c878edd44e 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -636,7 +636,7 @@ reg = <0x0 0x70030000 0x0 0x10000>; interrupts = ; clocks = <&tegra_car TEGRA124_CLK_HDA>, - <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index e058709e6d98..0a8d1a6c9ebe 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -601,8 +601,8 @@ <&tegra_car TEGRA20_CLK_PLL_E>; clock-names = "pex", "afi", "pll_e"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index fe04fb5e155f..38e1e276bafc 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -42,8 +42,8 @@ <&tegra_car TEGRA30_CLK_CML0>; clock-names = "pex", "afi", "pll_e", "cml"; resets = <&tegra_car 70>, - <&tegra_car 72>, - <&tegra_car 74>; + <&tegra_car 72>, + <&tegra_car 74>; reset-names = "pex", "afi", "pcie_x"; status = "disabled"; @@ -153,7 +153,7 @@ &tegra_car TEGRA30_CLK_GR3D2>; clock-names = "3d", "3d2"; resets = <&tegra_car 24>, - <&tegra_car 98>; + <&tegra_car 98>; reset-names = "3d", "3d2"; }; @@ -455,7 +455,7 @@ }; i2c@7000c000 { - compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; + compatible = "nvidia,tegra30-i2c", "nvidia,tegra20-i2c"; reg = <0x7000c000 0x100>; interrupts = ; #address-cells = <1>; @@ -660,7 +660,7 @@ reg = <0x70030000 0x10000>; interrupts = ; clocks = <&tegra_car TEGRA30_CLK_HDA>, - <&tegra_car TEGRA30_CLK_HDA2HDMI>, + <&tegra_car TEGRA30_CLK_HDA2HDMI>, <&tegra_car TEGRA30_CLK_HDA2CODEC_2X>; clock-names = "hda", "hda2hdmi", "hda2codec_2x"; resets = <&tegra_car 125>, /* hda */ -- cgit v1.2.3-70-g09d2 From a5e27206b3b560f91aa421e166029db02b15a7dd Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:28 +0200 Subject: ARM: tegra: apalis: Update hardware revisions compatibility comment Update introductory comment about what exact hardware revisions this device tree is compatible with as a hint for our customers. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index a5446cba9804..3bff4d7a1d88 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -1,8 +1,9 @@ #include "tegra30.dtsi" /* - * Toradex Apalis T30 Device Tree - * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + * Toradex Apalis T30 Module Device Tree + * Compatible for Revisions 1GB: V1.0A, V1.1A; 1GB IT: V1.1A; + * 2GB: V1.0B, V1.0C, V1.0E, V1.1A */ / { model = "Toradex Apalis T30"; -- cgit v1.2.3-70-g09d2 From 654b7d6aec9e55ca5e67adb3bdf0fefd9533c900 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:29 +0200 Subject: ARM: tegra: apalis: Fix HDMI power supplies Fix HDMI supplies (both regular VDD as well as PLL ones) being switched by the TPS65911 PMIC's GPIO6 aka EN_VDD_HDMI by introducing two new GPIO switched fixed regulators avdd_hdmi_pll_1v8_reg and avdd_hdmi_3v3_reg. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 3bff4d7a1d88..fd6c94e0eeac 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -34,8 +34,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -667,18 +667,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; -- cgit v1.2.3-70-g09d2 From 0f44de6cb8904e9a686188aaa51323280d37e127 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:30 +0200 Subject: ARM: tegra: apalis: Fix pin muxing Fix pin muxing which got broken due to certain stuff having been fixed or renamed since. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index fd6c94e0eeac..84744dc446c4 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -66,7 +66,7 @@ /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ uart3_cts_n_pa1 { nvidia,pins = "uart3_cts_n_pa1"; - nvidia,function = "rsvd1"; + nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; }; @@ -152,32 +152,32 @@ }; /* Apalis PWM1 */ - gpio_pu6 { - nvidia,pins = "gpio_pu6"; + pu6 { + nvidia,pins = "pu6"; nvidia,function = "pwm3"; nvidia,pull = ; nvidia,tristate = ; }; /* Apalis PWM2 */ - gpio_pu5 { - nvidia,pins = "gpio_pu5"; + pu5 { + nvidia,pins = "pu5"; nvidia,function = "pwm2"; nvidia,pull = ; nvidia,tristate = ; }; /* Apalis PWM3 */ - gpio_pu4 { - nvidia,pins = "gpio_pu4"; + pu4 { + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = ; nvidia,tristate = ; }; /* Apalis PWM4 */ - gpio_pu3 { - nvidia,pins = "gpio_pu3"; + pu3 { + nvidia,pins = "pu3"; nvidia,function = "pwm0"; nvidia,pull = ; nvidia,tristate = ; -- cgit v1.2.3-70-g09d2 From 7be74b0594a51a1b0fb1eba1001e7beda6a4b9de Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:31 +0200 Subject: ARM: tegra: apalis: Add comment concerning eMMC Instead of adding an otherwise unused emmc label just add a comment describing what the SDHCI is routed to. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 84744dc446c4..d1b24b10f22d 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -636,6 +636,7 @@ nvidia,sys-clock-req-active-high; }; + /* eMMC */ sdhci@78000600 { status = "okay"; bus-width = <8>; -- cgit v1.2.3-70-g09d2 From 4399f40b2bebde152171112253990f1a88abd912 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:32 +0200 Subject: ARM: tegra: apalis: Add digital audio pin muxing Add Apalis digital audio pin muxing which is e.g. used for HDA operation together with the Realtek HDA codec as found on the Apalis Evaluation board. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index d1b24b10f22d..4a6ca389595c 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -109,6 +109,30 @@ nvidia,enable-input = ; }; + /* Apalis Digital Audio */ + clk1_req_pee2 { + nvidia,pins = "clk1_req_pee2"; + nvidia,function = "hda"; + nvidia,pull = ; + nvidia,tristate = ; + }; + clk2_out_pw5 { + nvidia,pins = "clk2_out_pw5"; + nvidia,function = "extperiph2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + dap1_fs_pn0 { + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; + nvidia,function = "hda"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* Apalis I2C3 */ cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", -- cgit v1.2.3-70-g09d2 From 40699b926df77ccfe2a85c14ede6ac61e515bb40 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 15 Sep 2015 10:29:57 +0200 Subject: ARM: tegra: apalis: Properly align pin names Align pin names on subsequent lines with the first the name of the first pin in the first line. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis.dtsi | 152 +++++++++++++++++----------------- 1 file changed, 76 insertions(+), 76 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi index 4a6ca389595c..bf361277fe10 100644 --- a/arch/arm/boot/dts/tegra30-apalis.dtsi +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -58,14 +58,14 @@ /* Apalis BKL1_PWM */ uart3_rts_n_pc0 { - nvidia,pins = "uart3_rts_n_pc0"; + nvidia,pins = "uart3_rts_n_pc0"; nvidia,function = "pwm0"; nvidia,pull = ; nvidia,tristate = ; }; /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ uart3_cts_n_pa1 { - nvidia,pins = "uart3_cts_n_pa1"; + nvidia,pins = "uart3_cts_n_pa1"; nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; @@ -73,10 +73,10 @@ /* Apalis CAN1 on SPI6 */ spi2_cs0_n_px3 { - nvidia,pins = "spi2_cs0_n_px3", - "spi2_miso_px1", - "spi2_mosi_px0", - "spi2_sck_px2"; + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; nvidia,function = "spi6"; nvidia,pull = ; nvidia,tristate = ; @@ -92,10 +92,10 @@ /* Apalis CAN2 on SPI4 */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "spi4"; nvidia,pull = ; nvidia,tristate = ; @@ -111,7 +111,7 @@ /* Apalis Digital Audio */ clk1_req_pee2 { - nvidia,pins = "clk1_req_pee2"; + nvidia,pins = "clk1_req_pee2"; nvidia,function = "hda"; nvidia,pull = ; nvidia,tristate = ; @@ -124,10 +124,10 @@ nvidia,enable-input = ; }; dap1_fs_pn0 { - nvidia,pins = "dap1_fs_pn0", - "dap1_din_pn1", - "dap1_dout_pn2", - "dap1_sclk_pn3"; + nvidia,pins = "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3"; nvidia,function = "hda"; nvidia,pull = ; nvidia,tristate = ; @@ -147,21 +147,21 @@ /* Apalis MMC1 */ sdmmc3_clk_pa6 { - nvidia,pins = "sdmmc3_clk_pa6", - "sdmmc3_cmd_pa7"; + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; }; sdmmc3_dat0_pb7 { - nvidia,pins = "sdmmc3_dat0_pb7", - "sdmmc3_dat1_pb6", - "sdmmc3_dat2_pb5", - "sdmmc3_dat3_pb4", - "sdmmc3_dat4_pd1", - "sdmmc3_dat5_pd0", - "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; @@ -177,7 +177,7 @@ /* Apalis PWM1 */ pu6 { - nvidia,pins = "pu6"; + nvidia,pins = "pu6"; nvidia,function = "pwm3"; nvidia,pull = ; nvidia,tristate = ; @@ -185,7 +185,7 @@ /* Apalis PWM2 */ pu5 { - nvidia,pins = "pu5"; + nvidia,pins = "pu5"; nvidia,function = "pwm2"; nvidia,pull = ; nvidia,tristate = ; @@ -193,7 +193,7 @@ /* Apalis PWM3 */ pu4 { - nvidia,pins = "pu4"; + nvidia,pins = "pu4"; nvidia,function = "pwm1"; nvidia,pull = ; nvidia,tristate = ; @@ -201,7 +201,7 @@ /* Apalis PWM4 */ pu3 { - nvidia,pins = "pu3"; + nvidia,pins = "pu3"; nvidia,function = "pwm0"; nvidia,pull = ; nvidia,tristate = ; @@ -223,11 +223,11 @@ nvidia,tristate = ; }; sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; nvidia,pull = ; nvidia,tristate = ; @@ -243,10 +243,10 @@ /* Apalis SPI1 */ spi1_sck_px5 { - nvidia,pins = "spi1_sck_px5", - "spi1_mosi_px4", - "spi1_miso_px7", - "spi1_cs0_n_px6"; + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; nvidia,function = "spi1"; nvidia,pull = ; nvidia,tristate = ; @@ -254,10 +254,10 @@ /* Apalis SPI2 */ lcd_sck_pz4 { - nvidia,pins = "lcd_sck_pz4", - "lcd_sdout_pn5", - "lcd_sdin_pz2", - "lcd_cs0_n_pn4"; + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; nvidia,function = "spi5"; nvidia,pull = ; nvidia,tristate = ; @@ -265,14 +265,14 @@ /* Apalis UART1 */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = ; nvidia,tristate = ; @@ -280,10 +280,10 @@ /* Apalis UART2 */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "uartd"; nvidia,pull = ; nvidia,tristate = ; @@ -291,8 +291,8 @@ /* Apalis UART3 */ uart2_rxd_pc3 { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = ; nvidia,tristate = ; @@ -300,8 +300,8 @@ /* Apalis UART4 */ uart3_rxd_pw7 { - nvidia,pins = "uart3_rxd_pw7", - "uart3_txd_pw6"; + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; nvidia,function = "uartc"; nvidia,pull = ; nvidia,tristate = ; @@ -337,21 +337,21 @@ /* eMMC (On-module) */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; @@ -359,10 +359,10 @@ /* LVDS Transceiver Configuration */ pbb0 { - nvidia,pins = "pbb0", - "pbb7", - "pcc1", - "pcc2"; + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; nvidia,function = "rsvd2"; nvidia,pull = ; nvidia,tristate = ; @@ -370,10 +370,10 @@ nvidia,lock = ; }; pbb3 { - nvidia,pins = "pbb3", - "pbb4", - "pbb5", - "pbb6"; + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; nvidia,function = "displayb"; nvidia,pull = ; nvidia,tristate = ; -- cgit v1.2.3-70-g09d2 From 26f660d9db98582e28b85a95cd2318ba2dc9df8a Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:33 +0200 Subject: ARM: tegra: apalis-eval: Enable HDA controller Actually enable HDA now that it should otherwise be supported by the driver and the device tree. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis-eval.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 6236bdecb48b..5a49f03c5f34 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -126,6 +126,10 @@ }; }; + hda@70030000 { + status = "okay"; + }; + sd1: sdhci@78000000 { status = "okay"; bus-width = <4>; -- cgit v1.2.3-70-g09d2 From ea147c8f0e8e5265143f43e602b978ff1859a1b1 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:34 +0200 Subject: ARM: tegra: apalis-eval: Set OTG dr_mode This has currently no functional effect as neither USB device nor OTG is currently supported on any Tegras in mainline as of yet. However once we use the same device tree on U-Boot this will actually make it work properly there. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis-eval.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 5a49f03c5f34..37437c6e59ee 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -153,6 +153,7 @@ usb-phy@7d000000 { status = "okay"; + dr_mode = "otg"; vbus-supply = <&usbo1_vbus_reg>; }; -- cgit v1.2.3-70-g09d2 From 9ecf78c277ab721f793cccc84312d7f55011b40c Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:35 +0200 Subject: ARM: tegra: apalis-eval: Fix backlight PWM comment Fix the backlight PWM comment as it is actually called PWM_BKL1 rather than just PWM0. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis-eval.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index 37437c6e59ee..c832c157f76a 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -180,7 +180,7 @@ backlight: backlight { compatible = "pwm-backlight"; - /* PWM0 */ + /* PWM_BKL1 */ pwms = <&pwm 0 5000000>; brightness-levels = <255 231 223 207 191 159 127 0>; default-brightness-level = <6>; -- cgit v1.2.3-70-g09d2 From 21db15df49e9095326ce672209ec47c022105422 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 14:42:36 +0200 Subject: ARM: tegra: apalis-eval: Fix power/wakeup key Rather than a power key, WAKE1_MICO is actually a standard Apalis MXM3 pin used for wake-up purposes which this patch fixes. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-apalis-eval.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts index c832c157f76a..f2879cfcca62 100644 --- a/arch/arm/boot/dts/tegra30-apalis-eval.dts +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -191,10 +191,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "WAKE1_MICO"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; - linux,code = ; + linux,code = ; debounce-interval = <10>; gpio-key,wakeup; }; -- cgit v1.2.3-70-g09d2 From 39ebbf61d4a71dc0f47ac443c9d3fb433b057283 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:36 +0200 Subject: ARM: tegra: colibri: Update hardware revisions compatibility Update introductory comment about what exact hardware revisions this device tree is compatible with as a hint for our customers. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index c4ed1bec4d92..83ba3f2b47db 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -2,8 +2,8 @@ #include "tegra30.dtsi" /* - * Toradex Colibri T30 Device Tree - * Compatible for Revisions 1.1B/1.1C/1.1D + * Toradex Colibri T30 Module Device Tree + * Compatible for Revisions V1.1B, V1.1C, V1.1D, V1.1E; IT: V1.1A */ / { model = "Toradex Colibri T30"; -- cgit v1.2.3-70-g09d2 From 312d373225fb9f05a9b45207087378d236026b4e Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:37 +0200 Subject: ARM: tegra: colibri: Fix HDMI supplies Fix HDMI supplies (both regular VDD as well as PLL ones) being switched by the TPS65911 PMIC's GPIO6 aka EN_VDD_HDMI by introducing two new GPIO witched fixed regulators avdd_hdmi_pll_1v8_reg and avdd_hdmi_3v3_reg. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 83ba3f2b47db..5e6a47edacfd 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -15,8 +15,8 @@ host1x@50000000 { hdmi@54280000 { - vdd-supply = <&sys_3v3_reg>; - pll-supply = <&vio_reg>; + vdd-supply = <&avdd_hdmi_3v3_reg>; + pll-supply = <&avdd_hdmi_pll_1v8_reg>; nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; @@ -365,18 +365,40 @@ #address-cells = <1>; #size-cells = <0>; - sys_3v3_reg: regulator@100 { + avdd_hdmi_pll_1v8_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; + regulator-name = "+V1.8_AVDD_HDMI_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&vio_reg>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; regulator-name = "3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-always-on; }; - charge_pump_5v0_reg: regulator@101 { + avdd_hdmi_3v3_reg: regulator@102 { compatible = "regulator-fixed"; - reg = <101>; + reg = <102>; + regulator-name = "+V3.3_AVDD_HDMI"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; + vin-supply = <&sys_3v3_reg>; + }; + + charge_pump_5v0_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; regulator-name = "5v0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; -- cgit v1.2.3-70-g09d2 From 62bcaba1ab2fb1a9ce5e6d7540ca5efa609fe480 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:38 +0200 Subject: ARM: tegra: colibri: Improve comment about thermal alert pin Improve the comment about the THERMD_ALERT# pin which is the unlatched I2C address pin of the LM95245 temperature sensor and therefore requires disabling for now otherwise it won't get detected properly. While at it also move that pin further down to have it alphabetically sorted again. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 5e6a47edacfd..074123fa48ce 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -66,15 +66,6 @@ nvidia,enable-input = ; }; - /* Thermal alert, need to be disabled */ - lcd_dc1_pd2 { - nvidia,pins = "lcd_dc1_pd2"; - nvidia,function = "rsvd3"; - nvidia,pull = ; - nvidia,tristate = ; - nvidia,enable-input = ; - }; - /* Colibri MMC */ kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; @@ -167,6 +158,19 @@ nvidia,pull = ; nvidia,tristate = ; }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; }; }; -- cgit v1.2.3-70-g09d2 From e48f6c0eaac087519f9343297eedc6dc117bb153 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:39 +0200 Subject: ARM: tegra: colibri: Add pin muxing for on-module power I2C Add pin muxing for the on-module power I2C bus which connects to the PMICs, temperature sensor and touch screen controller. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 074123fa48ce..4ddccfad8521 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -159,6 +159,18 @@ nvidia,tristate = ; }; + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + /* * THERMD_ALERT#, unlatched I2C address pin of LM95245 * temperature sensor therefore requires disabling for -- cgit v1.2.3-70-g09d2 From b038e3b916cf5c6f4f27f1fbaa10b657a941be54 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:40 +0200 Subject: ARM: tegra: colibri: Fix comment about 3v3 fixed supply Fix the comment about the 3v3 fixed supply as the previous v3_3 was bogus. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 4ddccfad8521..57335c30a013 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -252,7 +252,7 @@ /* * EN_+V3.3 switching via FET: * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN - * see also v3_3 fixed supply + * see also 3v3 fixed supply */ ldo2_reg: ldo2 { regulator-name = "en_3v3"; -- cgit v1.2.3-70-g09d2 From 6456e9c5a27fad0345d2b24ea35ce5562917a352 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:41 +0200 Subject: ARM: tegra: colibri: Add touch pen interrupt pin muxing Add TOUCH_PEN_INT# pin muxing required for proper STMPE811 touch screen controller operation. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 57335c30a013..fba3d2a8b9fc 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -183,6 +183,15 @@ nvidia,tristate = ; nvidia,enable-input = ; }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; }; }; -- cgit v1.2.3-70-g09d2 From 737a7c26a8917f4789884f728e66856a5d526556 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:42 +0200 Subject: ARM: tegra: colibri: Activate STMPE811 touch controller Activate STMPE811 touch controller as found on Colibri T30 modules. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 40 ++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index fba3d2a8b9fc..5f8ec5cafe9e 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -320,6 +320,46 @@ }; }; + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = ; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + /* * LM95245 temperature sensor * Note: OVERT_N directly connected to PMIC PWRDN -- cgit v1.2.3-70-g09d2 From 3791d1cc4bb1aa78c1032873a637ceeaf304a704 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:43 +0200 Subject: ARM: tegra: colibri: Replace eMMC label by comment Rather than a bogus label just add a comment identifying the SDHCI instance connected to the on-module eMMC. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 5f8ec5cafe9e..67ba9431e386 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -396,7 +396,8 @@ nvidia,sys-clock-req-active-high; }; - emmc: sdhci@78000600 { + /* eMMC */ + sdhci@78000600 { status = "okay"; bus-width = <8>; non-removable; -- cgit v1.2.3-70-g09d2 From d5edc4ecc84edc6a336592a39946f44543158cf3 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Tue, 15 Sep 2015 10:29:57 +0200 Subject: ARM: tegra: colibri: Properly align pin names Align pin names on subsequent lines with the first the name of the first pin in the first line. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri.dtsi | 72 +++++++++++++++++----------------- 1 file changed, 36 insertions(+), 36 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri.dtsi b/arch/arm/boot/dts/tegra30-colibri.dtsi index 67ba9431e386..2d8c58fd9357 100644 --- a/arch/arm/boot/dts/tegra30-colibri.dtsi +++ b/arch/arm/boot/dts/tegra30-colibri.dtsi @@ -39,7 +39,7 @@ /* Colibri Backlight PWM */ sdmmc3_dat3_pb4 { - nvidia,pins = "sdmmc3_dat3_pb4"; + nvidia,pins = "sdmmc3_dat3_pb4"; nvidia,function = "pwm0"; nvidia,pull = ; nvidia,tristate = ; @@ -74,11 +74,11 @@ nvidia,tristate = ; }; kb_row11_ps3 { - nvidia,pins = "kb_row11_ps3", - "kb_row12_ps4", - "kb_row13_ps5", - "kb_row14_ps6", - "kb_row15_ps7"; + nvidia,pins = "kb_row11_ps3", + "kb_row12_ps4", + "kb_row13_ps5", + "kb_row14_ps6", + "kb_row15_ps7"; nvidia,function = "sdmmc2"; nvidia,pull = ; nvidia,tristate = ; @@ -86,17 +86,17 @@ /* Colibri SSP */ ulpi_clk_py0 { - nvidia,pins = "ulpi_clk_py0", - "ulpi_dir_py1", - "ulpi_nxt_py2", - "ulpi_stp_py3"; + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; nvidia,function = "spi1"; nvidia,pull = ; nvidia,tristate = ; }; sdmmc3_dat6_pd3 { - nvidia,pins = "sdmmc3_dat6_pd3", - "sdmmc3_dat7_pd4"; + nvidia,pins = "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; nvidia,function = "spdif"; nvidia,pull = ; nvidia,tristate = ; @@ -104,14 +104,14 @@ /* Colibri UART_A */ ulpi_data0 { - nvidia,pins = "ulpi_data0_po1", - "ulpi_data1_po2", - "ulpi_data2_po3", - "ulpi_data3_po4", - "ulpi_data4_po5", - "ulpi_data5_po6", - "ulpi_data6_po7", - "ulpi_data7_po0"; + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; nvidia,function = "uarta"; nvidia,pull = ; nvidia,tristate = ; @@ -119,10 +119,10 @@ /* Colibri UART_B */ gmi_a16_pj7 { - nvidia,pins = "gmi_a16_pj7", - "gmi_a17_pb0", - "gmi_a18_pb1", - "gmi_a19_pk7"; + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; nvidia,function = "uartd"; nvidia,pull = ; nvidia,tristate = ; @@ -130,8 +130,8 @@ /* Colibri UART_C */ uart2_rxd { - nvidia,pins = "uart2_rxd_pc3", - "uart2_txd_pc2"; + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; nvidia,function = "uartb"; nvidia,pull = ; nvidia,tristate = ; @@ -139,21 +139,21 @@ /* eMMC */ sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; }; sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; -- cgit v1.2.3-70-g09d2 From e4212ffa41361aae7824844609ea4ac9f78513d8 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:44 +0200 Subject: ARM: tegra: colibri-eval: Fix vendor string of M41T0M6 RTC Fix compatible vendor string of M41T0M6 real time clock as found on the Colibri Evaluation board. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 4d3ddc585641..46a7c2d34f38 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -55,7 +55,7 @@ /* M41T0M6 real time clock on carrier board */ rtc@68 { - compatible = "stm,m41t00"; + compatible = "st,m41t00"; reg = <0x68>; }; }; -- cgit v1.2.3-70-g09d2 From ccb43161b0bde0d22692dbfb34383f2c0228abc3 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:45 +0200 Subject: ARM: tegra: colibri-eval: Add comment concerning SD/MMC Instead of adding an otherwise unused sdmmc label just add a comment. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index 46a7c2d34f38..a6c98b19a6bb 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -84,6 +84,7 @@ }; }; + /* SD/MMC */ sdhci@78000200 { status = "okay"; bus-width = <4>; -- cgit v1.2.3-70-g09d2 From 3f5331324f187b3dc7634c4fb4351f7bd36fad21 Mon Sep 17 00:00:00 2001 From: Marcel Ziswiler Date: Fri, 28 Aug 2015 17:59:46 +0200 Subject: ARM: tegra: colibri-eval: Fix power/wakeup key Rather than a power key SODIMM pin 45 is actually used for wake-up purposes which this patch fixes. Signed-off-by: Marcel Ziswiler Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra30-colibri-eval-v3.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts index a6c98b19a6bb..3ff019f47d00 100644 --- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts @@ -137,10 +137,10 @@ gpio-keys { compatible = "gpio-keys"; - power { - label = "Power"; + wakeup { + label = "SODIMM pin 45 wakeup"; gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_HIGH>; - linux,code = ; + linux,code = ; debounce-interval = <10>; gpio-key,wakeup; }; -- cgit v1.2.3-70-g09d2 From 5c3a87e363c09242541620a777d5b73e89b6c245 Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Tue, 11 Aug 2015 17:39:36 -0700 Subject: arm64: dts: Add X-Gene reboot driver dts node This patch add dts nodes for X-Gene platforms to use generic SYSCON regmap reset driver for its reset operation. [dhdang: changelog] Signed-off-by: Feng Kan Signed-off-by: Duc Dang --- arch/arm64/boot/dts/apm/apm-storm.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index d831bc2ac204..c50a27f9d2ff 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -396,6 +396,18 @@ 0x0 0x1f 0x4>; }; + scu: system-clk-controller@17000000 { + compatible = "apm,xgene-scu","syscon"; + reg = <0x0 0x17000000 0x0 0x400>; + }; + + reboot: reboot@17000014 { + compatible = "syscon-reboot"; + regmap = <&scu>; + offset = <0x14>; + mask = <0x1>; + }; + csw: csw@7e200000 { compatible = "apm,xgene-csw", "syscon"; reg = <0x0 0x7e200000 0x0 0x1000>; -- cgit v1.2.3-70-g09d2 From 94d6ba285f561cd4382b2410fcbf8820056de34e Mon Sep 17 00:00:00 2001 From: Tai Nguyen Date: Wed, 12 Aug 2015 12:32:32 -0700 Subject: power: reset: Add syscon poweroff device node for APM X-Gene platform This patch adds syscon poweroff device node to support poweroff feature on APM X-Gene Mustang platform Signed-off-by: Tai Nguyen Tested-by: dann frazier Acked-by: Moritz Fischer --- arch/arm64/boot/dts/apm/apm-mustang.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-mustang.dts b/arch/arm64/boot/dts/apm/apm-mustang.dts index 4c55833d8a41..01cdeda93c3a 100644 --- a/arch/arm64/boot/dts/apm/apm-mustang.dts +++ b/arch/arm64/boot/dts/apm/apm-mustang.dts @@ -33,6 +33,18 @@ interrupts = <0x0 0x2d 0x1>; }; }; + + poweroff_mbox: poweroff_mbox@10548000 { + compatible = "syscon"; + reg = <0x0 0x10548000 0x0 0x30>; + }; + + poweroff: poweroff@10548010 { + compatible = "syscon-poweroff"; + regmap = <&poweroff_mbox>; + offset = <0x10>; + mask = <0x1>; + }; }; &pcie0clk { -- cgit v1.2.3-70-g09d2 From e144dc5b8fadb1ca6d4c429aeae51a9f51d88b0e Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Mon, 18 May 2015 17:56:16 -0700 Subject: arm64: dts: add APM Merlin Board device tree This patch adds the support for APM Merlin board. The Merlin board is based on the APM X-Gene Shadowcat SoC. This DTS enables PMU, Ethernet, SATA and Serial. [dhdang: remove pcie0 node] Signed-off-by: Feng Kan Signed-off-by: Duc Dang --- arch/arm64/boot/dts/apm/Makefile | 1 + arch/arm64/boot/dts/apm/apm-merlin.dts | 50 ++++++ arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 244 +++++++++++++++++++++++++++++ 3 files changed, 295 insertions(+) create mode 100644 arch/arm64/boot/dts/apm/apm-merlin.dts create mode 100644 arch/arm64/boot/dts/apm/apm-shadowcat.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/Makefile b/arch/arm64/boot/dts/apm/Makefile index a2afabbc1717..c75f17a49471 100644 --- a/arch/arm64/boot/dts/apm/Makefile +++ b/arch/arm64/boot/dts/apm/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb +dtb-$(CONFIG_ARCH_XGENE) += apm-merlin.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts new file mode 100644 index 000000000000..a20ef5b27c6d --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -0,0 +1,50 @@ +/* + * dts file for AppliedMicro (APM) Merlin Board + * + * Copyright (C) 2015, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +/include/ "apm-shadowcat.dtsi" + +/ { + model = "APM X-Gene Merlin board"; + compatible = "apm,merlin", "apm,xgene-shadowcat"; + + chosen { }; + + memory { + device_type = "memory"; + reg = < 0x1 0x00000000 0x0 0x80000000 >; + }; +}; + +&serial0 { + status = "ok"; +}; + +&sata1 { + status = "ok"; +}; + +&sata2 { + status = "ok"; +}; + +&sata3 { + status = "ok"; +}; + +&sgenet0 { + status = "ok"; +}; + +&xgenet1 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi new file mode 100644 index 000000000000..b474aa03c391 --- /dev/null +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -0,0 +1,244 @@ +/* + * dts file for AppliedMicro (APM) X-Gene Shadowcat SOC + * + * Copyright (C) 2015, Applied Micro Circuits Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/ { + compatible = "apm,xgene-shadowcat"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu@000 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x000>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@001 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x001>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@100 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x100>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@101 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x101>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@200 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x200>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@201 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x201>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@300 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x300>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + cpu@301 { + device_type = "cpu"; + compatible = "apm,strega", "arm,armv8"; + reg = <0x0 0x301>; + enable-method = "spin-table"; + cpu-release-addr = <0x1 0x0000fff8>; + }; + }; + + gic: interrupt-controller@78090000 { + compatible = "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + interrupt-controller; + interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */ + ranges = <0 0 0 0x79000000 0x0 0x800000>; /* MSI Range */ + reg = <0x0 0x78090000 0x0 0x10000>, /* GIC Dist */ + <0x0 0x780A0000 0x0 0x20000>, /* GIC CPU */ + <0x0 0x780C0000 0x0 0x10000>, /* GIC VCPU Control */ + <0x0 0x780E0000 0x0 0x20000>; /* GIC VCPU */ + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 12 0xff04>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 0 0xff04>, /* Secure Phys IRQ */ + <1 13 0xff04>, /* Non-secure Phys IRQ */ + <1 14 0xff04>, /* Virt IRQ */ + <1 15 0xff04>; /* Hyp IRQ */ + clock-frequency = <50000000>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk: refclk { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <100000000>; + clock-output-names = "refclk"; + }; + + socpll: socpll@17000120 { + compatible = "apm,xgene-socpll-clock"; + #clock-cells = <1>; + clocks = <&refclk 0>; + reg = <0x0 0x17000120 0x0 0x1000>; + clock-output-names = "socpll"; + }; + + socplldiv2: socplldiv2 { + compatible = "fixed-factor-clock"; + #clock-cells = <1>; + clocks = <&socpll 0>; + clock-mult = <1>; + clock-div = <2>; + clock-output-names = "socplldiv2"; + }; + + pcie0clk: pcie0clk@1f2bc000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f2bc000 0x0 0x1000>; + reg-names = "csr-reg"; + clock-output-names = "pcie0clk"; + }; + + xge0clk: xge0clk@1f61c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f61c000 0x0 0x1000>; + reg-names = "csr-reg"; + enable-mask = <0x3>; + csr-mask = <0x3>; + clock-output-names = "xge0clk"; + }; + + xge1clk: xge1clk@1f62c000 { + compatible = "apm,xgene-device-clock"; + #clock-cells = <1>; + clocks = <&socplldiv2 0>; + reg = <0x0 0x1f62c000 0x0 0x1000>; + reg-names = "csr-reg"; + enable-mask = <0x3>; + csr-mask = <0x3>; + clock-output-names = "xge1clk"; + }; + }; + + serial0: serial@10600000 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0 0x10600000 0x0 0x1000>; + reg-shift = <2>; + clock-frequency = <10000000>; + interrupt-parent = <&gic>; + interrupts = <0x0 0x4c 0x4>; + }; + + sata1: sata@1a000000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a000000 0x0 0x1000>, + <0x0 0x1f200000 0x0 0x1000>, + <0x0 0x1f20d000 0x0 0x1000>, + <0x0 0x1f20e000 0x0 0x1000>; + interrupts = <0x0 0x5a 0x4>; + dma-coherent; + }; + + sata2: sata@1a200000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a200000 0x0 0x1000>, + <0x0 0x1f210000 0x0 0x1000>, + <0x0 0x1f21d000 0x0 0x1000>, + <0x0 0x1f21e000 0x0 0x1000>; + interrupts = <0x0 0x5b 0x4>; + dma-coherent; + }; + + sata3: sata@1a400000 { + compatible = "apm,xgene-ahci"; + reg = <0x0 0x1a400000 0x0 0x1000>, + <0x0 0x1f220000 0x0 0x1000>, + <0x0 0x1f22d000 0x0 0x1000>, + <0x0 0x1f22e000 0x0 0x1000>; + interrupts = <0x0 0x5c 0x4>; + dma-coherent; + }; + + sgenet0: ethernet@1f610000 { + compatible = "apm,xgene2-sgenet"; + status = "disabled"; + reg = <0x0 0x1f610000 0x0 0x10000>, + <0x0 0x1f600000 0x0 0Xd100>, + <0x0 0x20000000 0x0 0X20000>; + interrupts = <0 96 4>, + <0 97 4>; + dma-coherent; + clocks = <&xge0clk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-connection-type = "sgmii"; + }; + + xgenet1: ethernet@1f620000 { + compatible = "apm,xgene2-xgenet"; + status = "disabled"; + reg = <0x0 0x1f620000 0x0 0x10000>, + <0x0 0x1f600000 0x0 0Xd100>, + <0x0 0x20000000 0x0 0X220000>; + interrupts = <0 108 4>, + <0 109 4>; + port-id = <1>; + dma-coherent; + clocks = <&xge1clk 0>; + local-mac-address = [00 01 73 00 00 02]; + phy-connection-type = "xgmii"; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 991c1292f61261180873be430b9bdd50de36055d Mon Sep 17 00:00:00 2001 From: Duc Dang Date: Wed, 12 Aug 2015 16:37:08 -0700 Subject: arm64: dts: Add X-Gene v2 reboot driver dts node This patch add dts nodes for X-Gene v2 (APM X-Gene Shadowcat SoC) platforms to use generic SYSCON regmap reset driver for its reset operation. Signed-off-by: Duc Dang --- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index b474aa03c391..350b82b84ab6 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -172,6 +172,18 @@ }; }; + scu: system-clk-controller@17000000 { + compatible = "apm,xgene-scu","syscon"; + reg = <0x0 0x17000000 0x0 0x400>; + }; + + reboot: reboot@17000014 { + compatible = "syscon-reboot"; + regmap = <&scu>; + offset = <0x14>; + mask = <0x1>; + }; + serial0: serial@10600000 { device_type = "serial"; compatible = "ns16550"; -- cgit v1.2.3-70-g09d2 From 7434f42b8e5ca5d57262ca7ceb856a86e4ade0d4 Mon Sep 17 00:00:00 2001 From: Feng Kan Date: Wed, 7 Jan 2015 17:33:38 -0700 Subject: arm64: dts: Add PMU node for APM X-Gene Storm SOC This patch adds the PMU device tree node for APM X-Gene Storm SOC. Signed-off-by: Vinayak Kale Signed-off-by: Feng Kan --- arch/arm64/boot/dts/apm/apm-storm.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi index c50a27f9d2ff..9e65b75d35bc 100644 --- a/arch/arm64/boot/dts/apm/apm-storm.dtsi +++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi @@ -97,6 +97,11 @@ clock-frequency = <50000000>; }; + pmu { + compatible = "apm,potenza-pmu", "arm,armv8-pmuv3"; + interrupts = <1 12 0xff04>; + }; + soc { compatible = "simple-bus"; #address-cells = <2>; -- cgit v1.2.3-70-g09d2 From 5fc86b513fd3a2f19fb267bc2e9cac49c792294e Mon Sep 17 00:00:00 2001 From: Duc Dang Date: Tue, 1 Sep 2015 13:39:27 -0700 Subject: arm64: dts: Add APM X-Gene 2 standby GPIO controller DTS entries Add standby domain gpio controller for APM X-Gene 2 SoC platforms. Signed-off-by: Duc Dang --- arch/arm64/boot/dts/apm/apm-shadowcat.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi index 350b82b84ab6..c804f8f1f38c 100644 --- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi +++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi @@ -224,6 +224,21 @@ dma-coherent; }; + sbgpio: sbgpio@17001000{ + compatible = "apm,xgene-gpio-sb"; + reg = <0x0 0x17001000 0x0 0x400>; + #gpio-cells = <2>; + gpio-controller; + interrupts = <0x0 0x28 0x1>, + <0x0 0x29 0x1>, + <0x0 0x2a 0x1>, + <0x0 0x2b 0x1>, + <0x0 0x2c 0x1>, + <0x0 0x2d 0x1>, + <0x0 0x2e 0x1>, + <0x0 0x2f 0x1>; + }; + sgenet0: ethernet@1f610000 { compatible = "apm,xgene2-sgenet"; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 1d8d53b62d80dc3a6ae1483891e7d840cd7a51bd Mon Sep 17 00:00:00 2001 From: Duc Dang Date: Tue, 1 Sep 2015 13:42:16 -0700 Subject: arm64: dts: Add poweroff device nodes for APM X-Gene 2 platform This patch adds: + poweroff button device node to support poweroff by power button on APM X-Gene 2 Merlin platform. + syscon poweroff device node to support poweroff feature on APM X-Gene 2 Merlin platform Signed-off-by: Duc Dang --- arch/arm64/boot/dts/apm/apm-merlin.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/apm/apm-merlin.dts b/arch/arm64/boot/dts/apm/apm-merlin.dts index a20ef5b27c6d..119a469bd189 100644 --- a/arch/arm64/boot/dts/apm/apm-merlin.dts +++ b/arch/arm64/boot/dts/apm/apm-merlin.dts @@ -23,6 +23,28 @@ device_type = "memory"; reg = < 0x1 0x00000000 0x0 0x80000000 >; }; + + gpio-keys { + compatible = "gpio-keys"; + button@1 { + label = "POWER"; + linux,code = <116>; + linux,input-type = <0x1>; + interrupts = <0x0 0x28 0x1>; + }; + }; + + poweroff_mbox: poweroff_mbox@10548000 { + compatible = "syscon"; + reg = <0x0 0x10548000 0x0 0x30>; + }; + + poweroff: poweroff@10548010 { + compatible = "syscon-poweroff"; + regmap = <&poweroff_mbox>; + offset = <0x10>; + mask = <0x1>; + }; }; &serial0 { -- cgit v1.2.3-70-g09d2 From ee6011f299f3e75458bd6e91db5795e5adedd6fe Mon Sep 17 00:00:00 2001 From: Kamil Debski Date: Mon, 17 Aug 2015 08:53:47 +0900 Subject: ARM: dts: Add pwm-fan node for exynos4412-odroidu3 Add pwm-fan node to the Odroid-U3 board file to enable PWM control of the cooling fan. In addition, add the "pwm" label to the pwm@139D0000 node in the exynos4412.dtsi. Signed-off-by: Kamil Debski Signed-off-by: Lukasz Majewski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 8632f35c6c26..54b3bc1dba1d 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -32,6 +32,18 @@ linux,default-trigger = "heartbeat"; }; }; + + pwm-fan { + compatible = "pwm-fan"; + pwms = <&pwm 0 10000 0>; + }; +}; + +&pwm { + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>; + status = "okay"; }; &usb3503 { -- cgit v1.2.3-70-g09d2 From d3981d1e0a34bd294d620476a33967452e0298a7 Mon Sep 17 00:00:00 2001 From: Lukasz Majewski Date: Mon, 17 Aug 2015 08:53:48 +0900 Subject: ARM: dts: use pwm-fan device as a cooling device for exynos4412-odroidu3 With those bindings it is possible to use pwm-fan device available in Odroid U3 as a cooling device. Signed-off-by: Lukasz Majewski Acked-by: Eduardo Valentin Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroidu3.dts | 33 ++++++++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 54b3bc1dba1d..1e6ef99eef59 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -33,9 +33,40 @@ }; }; - pwm-fan { + fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 10000 0>; + cooling-min-state = <0>; + cooling-max-state = <3>; + #cooling-cells = <2>; + cooling-levels = <0 102 170 230>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + cooling-maps { + map0 { + trip = <&cpu_alert1>; + cooling-device = <&cpu0 7 7>; + }; + map1 { + trip = <&cpu_alert2>; + cooling-device = <&cpu0 13 13>; + }; + map2 { + trip = <&cpu_alert0>; + cooling-device = <&fan0 0 1>; + }; + map3 { + trip = <&cpu_alert1>; + cooling-device = <&fan0 1 2>; + }; + map4 { + trip = <&cpu_alert2>; + cooling-device = <&fan0 2 3>; + }; + }; + }; }; }; -- cgit v1.2.3-70-g09d2 From 0fb033bb3a384fdf1c08bcfaf429ca6431de91c7 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 17 Aug 2015 08:55:51 +0900 Subject: ARM: dts: Fix power off method for exynos5422-odroidxu3-common The Odroid XU3 family boards have ACOKB pin of PMIC grounded, instead of pulled up as usual. This means that PMIC must manually set PWRHOLD field in its CTRL1 register to low before initiating power down. This fixes Odroid XU3 powering off: [ 25.966053] reboot: Power down [ 25.967679] Power down. [ 26.070174] Power down failed, please power off system manually. Signed-off-by: Krzysztof Kozlowski Reported-by: Anand Moon Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 3b43e57845ae..90d298dce851 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -160,6 +160,7 @@ s2mps11,buck2-ramp-enable = <1>; s2mps11,buck3-ramp-enable = <1>; s2mps11,buck4-ramp-enable = <1>; + samsung,s2mps11-acokb-ground; interrupt-parent = <&gpx0>; interrupts = <4 IRQ_TYPE_EDGE_FALLING>; -- cgit v1.2.3-70-g09d2 From 8cec734904f55d5551ac97fa9910752ef521a673 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 16 Sep 2015 08:37:07 +0900 Subject: ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio The Odroid XU4 board does not have audio codec so before adding DTS for new board split the audio codec to separate DTSI file. Include the audio codec DTSI in Odroid XU3 and XU3-Lite boards. Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi | 61 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 47 ----------------- arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 1 + arch/arm/boot/dts/exynos5422-odroidxu3.dts | 1 + 4 files changed, 63 insertions(+), 47 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi new file mode 100644 index 000000000000..9493923ec652 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-audio.dtsi @@ -0,0 +1,61 @@ +/* + * Hardkernel Odroid XU3 Audio Codec device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + sound: sound { + compatible = "simple-audio-card"; + + simple-audio-card,name = "Odroid-XU3"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Speakers", "Speakers"; + simple-audio-card,routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; + + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&link0_codec>; + simple-audio-card,frame-master = <&link0_codec>; + + simple-audio-card,cpu { + sound-dai = <&i2s0 0>; + system-clock-frequency = <19200000>; + }; + + link0_codec: simple-audio-card,codec { + sound-dai = <&max98090>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + }; + }; +}; + +&hsi2c_5 { + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + clocks = <&i2s0 CLK_I2S_CDCLK>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 90d298dce851..2f0fb8678e9f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -80,36 +80,6 @@ }; }; - sound: sound { - compatible = "simple-audio-card"; - - simple-audio-card,name = "Odroid-XU3"; - simple-audio-card,widgets = - "Headphone", "Headphone Jack", - "Speakers", "Speakers"; - simple-audio-card,routing = - "Headphone Jack", "HPL", - "Headphone Jack", "HPR", - "Headphone Jack", "MICBIAS", - "IN1", "Headphone Jack", - "Speakers", "SPKL", - "Speakers", "SPKR"; - - simple-audio-card,format = "i2s"; - simple-audio-card,bitclock-master = <&link0_codec>; - simple-audio-card,frame-master = <&link0_codec>; - - simple-audio-card,cpu { - sound-dai = <&i2s0 0>; - system-clock-frequency = <19200000>; - }; - - link0_codec: simple-audio-card,codec { - sound-dai = <&max98090>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - }; - }; - fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; @@ -376,19 +346,6 @@ }; }; -&hsi2c_5 { - status = "okay"; - max98090: max98090@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - clocks = <&i2s0 CLK_I2S_CDCLK>; - clock-names = "mclk"; - #sound-dai-cells = <0>; - }; -}; - &i2c_2 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -400,10 +357,6 @@ }; }; -&i2s0 { - status = "okay"; -}; - &mfc { samsung,mfc-r = <0x43000000 0x800000>; samsung,mfc-l = <0x51000000 0x800000>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index c06882bbb822..9c0cea99c996 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3 Lite"; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index 78e6a502f320..d8647a469a86 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -12,6 +12,7 @@ /dts-v1/; #include "exynos5422-odroidxu3-common.dtsi" +#include "exynos5422-odroidxu3-audio.dtsi" / { model = "Hardkernel Odroid XU3"; -- cgit v1.2.3-70-g09d2 From 6658356014cbf772c7f11154adc0c46717b3322b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 16 Sep 2015 08:37:11 +0900 Subject: ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4 Add Hardkernel Odroid XU4 board Device Tree sources. The board differs from Odroid XU3 and XU3-Lite by: 1. No green and red LEDs (except standard red power LED). 2. Only two PWM outputs are used (fan and blue LED) 3. No audio codec. 4. Two USB3 ports in host mode (no micro USB3 connector for OTG). 5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514). 6. Additional connector with IO ports (I2S_0, I2C_5). 7. No DisplayPort (like XU3-Lite). 8. No TI INA231 power measurement sensors (like XU3-Lite). Signed-off-by: Krzysztof Kozlowski Reviewed-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 50 +--------------------- arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts | 50 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3.dts | 50 ++++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroidxu4.dts | 48 +++++++++++++++++++++ 5 files changed, 150 insertions(+), 49 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroidxu4.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..3d27fe34647f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -123,6 +123,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5420-smdk5420.dtb \ exynos5422-odroidxu3.dtb \ exynos5422-odroidxu3-lite.dtb \ + exynos5422-odroidxu4.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index 2f0fb8678e9f..a83d569baea8 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -46,40 +46,6 @@ reset-gpios = <&gpd1 0 1>; }; - pwmleds { - compatible = "pwm-leds"; - - greenled { - label = "green:mmc0"; - pwms = <&pwm 1 2000000 0>; - pwm-names = "pwm1"; - /* - * Green LED is much brighter than the others - * so limit its max brightness - */ - max_brightness = <127>; - linux,default-trigger = "mmc0"; - }; - - blueled { - label = "blue:heartbeat"; - pwms = <&pwm 2 2000000 0>; - pwm-names = "pwm2"; - max_brightness = <255>; - linux,default-trigger = "heartbeat"; - }; - }; - - gpioleds { - compatible = "gpio-leds"; - redled { - label = "red:microSD"; - gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; - default-state = "off"; - linux,default-trigger = "mmc1"; - }; - }; - fan0: pwm-fan { compatible = "pwm-fan"; pwms = <&pwm 0 20972 0>; @@ -417,18 +383,6 @@ }; }; -&pwm { - /* - * PWM 0 -- fan - * PWM 1 -- Green LED - * PWM 2 -- Blue LED - * PWM 3 -- on MIPI connector for backlight - */ - pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; - pinctrl-names = "default"; - status = "okay"; -}; - &tmu_cpu0 { vtmu-supply = <&ldo7_reg>; status = "okay"; @@ -464,9 +418,7 @@ dr_mode = "host"; }; -&usbdrd_dwc3_1 { - dr_mode = "otg"; -}; +/* usbdrd_dwc3_1 mode customized in each board */ &usbdrd3_0 { vdd33-supply = <&ldo9_reg>; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts index 9c0cea99c996..b1b36081f343 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-lite.dts @@ -18,4 +18,54 @@ / { model = "Hardkernel Odroid XU3 Lite"; compatible = "hardkernel,odroid-xu3-lite", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index d8647a469a86..0c0bbdbfd85f 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -17,6 +17,40 @@ / { model = "Hardkernel Odroid XU3"; compatible = "hardkernel,odroid-xu3", "samsung,exynos5800", "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + greenled { + label = "green:mmc0"; + pwms = <&pwm 1 2000000 0>; + pwm-names = "pwm1"; + /* + * Green LED is much brighter than the others + * so limit its max brightness + */ + max_brightness = <127>; + linux,default-trigger = "mmc0"; + }; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; + + gpioleds { + compatible = "gpio-leds"; + redled { + label = "red:microSD"; + gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "mmc1"; + }; + }; }; &i2c_0 { @@ -50,3 +84,19 @@ shunt-resistor = <10000>; }; }; + +&pwm { + /* + * PWM 0 -- fan + * PWM 1 -- Green LED + * PWM 2 -- Blue LED + * PWM 3 -- on MIPI connector for backlight + */ + pinctrl-0 = <&pwm0_out &pwm1_out &pwm2_out &pwm3_out>; + pinctrl-names = "default"; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "otg"; +}; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu4.dts b/arch/arm/boot/dts/exynos5422-odroidxu4.dts new file mode 100644 index 000000000000..2faf88627a48 --- /dev/null +++ b/arch/arm/boot/dts/exynos5422-odroidxu4.dts @@ -0,0 +1,48 @@ +/* + * Hardkernel Odroid XU4 board device tree source + * + * Copyright (c) 2015 Krzysztof Kozlowski + * Copyright (c) 2014 Collabora Ltd. + * Copyright (c) 2013-2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5422-odroidxu3-common.dtsi" + +/ { + model = "Hardkernel Odroid XU4"; + compatible = "hardkernel,odroid-xu4", "samsung,exynos5800", \ + "samsung,exynos5"; + + pwmleds { + compatible = "pwm-leds"; + + blueled { + label = "blue:heartbeat"; + pwms = <&pwm 2 2000000 0>; + pwm-names = "pwm2"; + max_brightness = <255>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&pwm { + /* + * PWM 0 -- fan + * PWM 2 -- Blue LED + */ + pinctrl-0 = <&pwm0_out &pwm2_out>; + pinctrl-names = "default"; + samsung,pwm-outputs = <0>, <2>; + status = "okay"; +}; + +&usbdrd_dwc3_1 { + dr_mode = "host"; +}; -- cgit v1.2.3-70-g09d2 From 1a344e9b7557a819b8143d7d7d4365b9694bb5e3 Mon Sep 17 00:00:00 2001 From: Franklin S Cooper Jr Date: Thu, 17 Sep 2015 09:03:52 -0700 Subject: ARM: dts: keystone: Add ti,keystone-spi for SPI Add ti,keystone-spi to the compatible field for the SPI node. This new entry insures that the proper prescaler limit is used for keystone devices Signed-off-by: Franklin S Cooper Jr Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/keystone.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index 72816d65f7ec..fbc4a8e87234 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -136,7 +136,7 @@ }; spi0: spi@21000400 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000400 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -147,7 +147,7 @@ }; spi1: spi@21000600 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000600 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; @@ -158,7 +158,7 @@ }; spi2: spi@21000800 { - compatible = "ti,dm6441-spi"; + compatible = "ti,keystone-spi", "ti,dm6441-spi"; reg = <0x21000800 0x200>; num-cs = <4>; ti,davinci-spi-intr-line = <0>; -- cgit v1.2.3-70-g09d2 From d1a9c24ad16ab2b26f1574bc3f2c165a7beff5df Mon Sep 17 00:00:00 2001 From: Holger Busse Date: Wed, 26 Aug 2015 10:45:45 +0200 Subject: ARM: at91/dt: corrections to i2c1 declaration to sama5d4 Correcting the dma declaration for i2c1 dma. Signed-off-by: Holger Busse Signed-off-by: Nicolas Ferre Fixes: 4cc7cdf35c5f ("ARM: at91/dt: add i2c1 declaration to sama5d4") Cc: stable@vger.kernel.org # v4.1+ --- arch/arm/boot/dts/sama5d4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 8d1de29e8da1..fb92481e60d4 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -939,11 +939,11 @@ reg = <0xf8018000 0x4000>; interrupts = <33 IRQ_TYPE_LEVEL_HIGH 6>; dmas = <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(4)>, + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(4))>, <&dma1 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)) - AT91_XDMAC_DT_PERID(5)>; + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) + | AT91_XDMAC_DT_PERID(5))>; dma-names = "tx", "rx"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; -- cgit v1.2.3-70-g09d2 From 7b6521f112afcbb6555cf119c2eefb21dee5eae8 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Mon, 30 Mar 2015 18:40:22 +0800 Subject: ARM: at91/dt: at91sam9n12ek: fix the led labels name Correct the led labels in at91sam9n12ek. Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12ek.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index efa75064d38a..186a1705f8d3 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -204,13 +204,13 @@ }; d9 { - label = "d6"; + label = "d9"; gpios = <&pioB 5 GPIO_ACTIVE_LOW>; linux,default-trigger = "nand-disk"; }; d10 { - label = "d7"; + label = "d10"; gpios = <&pioB 6 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; -- cgit v1.2.3-70-g09d2 From eed7c4e611a7feaacb70fca1c3180af4edef4562 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 11 Sep 2014 09:29:12 +0800 Subject: ARM: at91/dt: at91sam9n12ek: disable i2c1 No device connect to i2c1, so remove it to keep it as disabled. Signed-off-by: Bo Shen Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9n12ek.dts | 4 ---- 1 file changed, 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 186a1705f8d3..acf3451a332d 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,10 +71,6 @@ }; }; - i2c1: i2c@f8014000 { - status = "okay"; - }; - mmc0: mmc@f0008000 { pinctrl-0 = < &pinctrl_board_mmc0 -- cgit v1.2.3-70-g09d2 From 7c08d8cda1dd0fb304e8171dce4300fc92907bd9 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Fri, 12 Jul 2013 18:17:00 +0800 Subject: ARM: at91/dt: at91sam9x5: enable iio touchscreen for 9x5ek Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9x5.dtsi | 3 ++- arch/arm/boot/dts/at91sam9x5ek.dtsi | 6 ++++++ 2 files changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 747d8f070a5c..9df8ca5666e9 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -68,7 +68,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <5000000>; + clock-frequency = <1000000>; }; }; @@ -1043,6 +1043,7 @@ atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res = <8 10>; atmel,adc-res-names = "lowres", "highres"; atmel,adc-use-res = "highres"; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index d237c462dfc6..36de329340d1 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -100,6 +100,12 @@ }; }; + adc0: adc@f804c000 { + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + pinctrl@fffff400 { camera_sensor { pinctrl_pck0_as_isi_mck: pck0_as_isi_mck-0 { -- cgit v1.2.3-70-g09d2 From 19146e7e91bd1c1d0838c44808bad151dee0d2e6 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 17 Apr 2015 15:27:19 +0200 Subject: ARM: at91/dt: sama5d3 xplained: disable pmic As PMIC act8865 can disturb communication on i2c1, and as it should be setup correctly then its i2c interface disabled by bootloader, we simply disregard it in DT. Acked-by: Wenyou Yang Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index d81474e0bcd6..8488ac53d22d 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -76,7 +76,7 @@ pmic: act8865@5b { compatible = "active-semi,act8865"; reg = <0x5b>; - status = "okay"; + status = "disabled"; regulators { vcc_1v8_reg: DCDC_REG1 { -- cgit v1.2.3-70-g09d2 From cb3651d7be288573591e9e21f3ba7e8258efa4c6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 28 Jan 2015 14:39:34 +0100 Subject: ARM: at91/dt: sama5d3: update iio config for touchscreen Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d3.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 7fa276515f11..1832736201ff 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -75,7 +75,7 @@ adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; - clock-frequency = <20000000>; + clock-frequency = <1000000>; }; }; @@ -322,6 +322,7 @@ atmel,adc-use-external-triggers; atmel,adc-vref = <3000>; atmel,adc-res = <10 12>; + atmel,adc-sample-hold-time = <11>; atmel,adc-res-names = "lowres", "highres"; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 679f8d92bb015cfe2af4fddbe22a6689609c4ec6 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 Apr 2015 10:07:18 +0200 Subject: ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index fb92481e60d4..c367153eed40 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1350,7 +1350,7 @@ 0xffffffff 0x3ffcfe7c 0x1c010101 /* pioA */ 0x7fffffff 0xfffccc3a 0x3f00cc3a /* pioB */ 0xffffffff 0x3ff83fff 0xff00ffff /* pioC */ - 0x00000000 0x00000000 0x00000000 /* pioD */ + 0x0003ff00 0x8002a800 0x00000000 /* pioD */ 0xffffffff 0x7fffffff 0x76fff1bf /* pioE */ >; @@ -1396,7 +1396,6 @@ interrupt-controller; #interrupt-cells = <2>; clocks = <&pioD_clk>; - status = "disabled"; }; pioE: gpio@fc06d000 { -- cgit v1.2.3-70-g09d2 From 4288ac7b882d2669fe4b795971392aadb7168fa8 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 7 Apr 2015 14:28:53 +0200 Subject: ARM: at91/dt: sama5d4: enable crypto nodes The crypto modules will provide HW AES/TDES/SHA for any sama5d4 board. Enable them by default. Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d4.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index c367153eed40..9760a7549f90 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1238,7 +1238,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; tdes@fc04c000 { @@ -1252,7 +1252,7 @@ dma-names = "tx", "rx"; clocks = <&tdes_clk>; clock-names = "tdes_clk"; - status = "disabled"; + status = "okay"; }; sha@fc050000 { @@ -1264,7 +1264,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; rstc@fc068600 { -- cgit v1.2.3-70-g09d2 From a21a6c47f53c575082800cd311a9ab0bd3b52809 Mon Sep 17 00:00:00 2001 From: Patrice Vilchez Date: Mon, 12 Jan 2015 11:34:45 +0100 Subject: ARM: at91/dt: sama5d4ek: Add support of QT1070 and Maxtouch As the EK board comes with a PDA 7" screen, add the touch buttons and touchscreen for it. Signed-off-by: Patrice Vilchez [nicolas.ferre@atmel.com: add commit message] Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d4ek.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d4ek.dts b/arch/arm/boot/dts/at91-sama5d4ek.dts index 49a59c7e4a5d..6d272c0125e3 100644 --- a/arch/arm/boot/dts/at91-sama5d4ek.dts +++ b/arch/arm/boot/dts/at91-sama5d4ek.dts @@ -148,6 +148,25 @@ clocks = <&pck2>; clock-names = "mclk"; }; + + qt1070:keyboard@1b { + compatible = "qt1070"; + reg = <0x1b>; + interrupt-parent = <&pioE>; + interrupts = <25 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; + }; + + atmel_mxt_ts@4c { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4c>; + interrupt-parent = <&pioE>; + interrupts = <24 0x0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mxt_ts>; + }; }; macb0: ethernet@f8020000 { @@ -204,6 +223,14 @@ atmel,pins = ; /* PE13 gpio */ }; + pinctrl_qt1070_irq: qt1070_irq { + atmel,pins = + ; + }; + pinctrl_mxt_ts: mxt_irq { + atmel,pins = + ; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 4a43c3b8d8c085d643786c7b69a75f72770fe04b Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Thu, 23 Apr 2015 10:08:04 +0200 Subject: ARM: at91/dt: sama5d4 xplained: enable the led D8 Enable D8 led as now the pioD is available. D8 is the power led and is on by default. Signed-off-by: Josh Wu [nicolas.ferre@atmel.com: split the patch in 2] Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d4_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d4_xplained.dts b/arch/arm/boot/dts/at91-sama5d4_xplained.dts index 07f46963335b..45371a1b61b3 100644 --- a/arch/arm/boot/dts/at91-sama5d4_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d4_xplained.dts @@ -246,7 +246,7 @@ d8 { label = "d8"; gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; - status = "disabled"; + default-state = "on"; }; d10 { -- cgit v1.2.3-70-g09d2 From 487eacb9fc184eb6e54b299df3faf3ee57ace5df Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 14 Sep 2015 14:42:12 +0800 Subject: arm: dts: berlin: add aliases for serial This is to prepare for the using stdout-path in next commit. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 6 ++++++ arch/arm/boot/dts/berlin2cd.dtsi | 5 +++++ arch/arm/boot/dts/berlin2q.dtsi | 5 +++++ 3 files changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index ef811de09908..40cf2623c4f9 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -47,6 +47,12 @@ model = "Marvell Armada 1500 (BG2) SoC"; compatible = "marvell,berlin2", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 900213d78a32..6246aecaa0c5 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -47,6 +47,11 @@ model = "Marvell Armada 1500-mini (BG2CD) SoC"; compatible = "marvell,berlin2cd", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 63a48490e2f9..380fa18a050e 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -43,6 +43,11 @@ model = "Marvell Armada 1500 pro (BG2-Q) SoC"; compatible = "marvell,berlin2q", "marvell,berlin"; + aliases { + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-70-g09d2 From c56e1a2be1cec29fb1de9358b0b2b20582cdca30 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Mon, 14 Sep 2015 14:42:13 +0800 Subject: arm: dts: berlin: use stdout-path Use stdout-path to specify the console and remove the console argument from the kernel command line. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts | 3 ++- arch/arm/boot/dts/berlin2cd-google-chromecast.dts | 3 ++- arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 3 ++- 3 files changed, 6 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts index 5c99fb3a4d10..3c0907b87fd6 100644 --- a/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts +++ b/arch/arm/boot/dts/berlin2-sony-nsz-gs7.dts @@ -45,7 +45,8 @@ compatible = "sony,nsz-gs7", "marvell,berlin2", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts index 772165ad0a52..8ba8b50ce997 100644 --- a/arch/arm/boot/dts/berlin2cd-google-chromecast.dts +++ b/arch/arm/boot/dts/berlin2cd-google-chromecast.dts @@ -46,7 +46,8 @@ compatible = "google,chromecast", "marvell,berlin2cd", "marvell,berlin"; chosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 4a749e5b3b44..da28c9704a9d 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -49,7 +49,8 @@ }; choosen { - bootargs = "console=ttyS0,115200 earlyprintk"; + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; }; regulators { -- cgit v1.2.3-70-g09d2 From 8884d8c7cc2fd8b8cd188204f340d16b3972deb0 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Fri, 18 Sep 2015 21:47:38 +0800 Subject: arm64: dts: berlin4ct: add GPIO nodes Marvell berlin4ct SoC has 6 GPIO ports powered by snps,dw-apb-gpio. This patch adds the corresponding device tree nodes. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 120 +++++++++++++++++++++++++++++ 1 file changed, 120 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi index dd4a10d605d9..a3b5f1d4a240 100644 --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi @@ -135,6 +135,96 @@ interrupts = ; }; + apb@e80000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0xe80000 0x10000>; + interrupt-parent = <&aic>; + + gpio0: gpio@0400 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0400 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porta: gpio-port@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0>; + }; + }; + + gpio1: gpio@0800 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portb: gpio-port@1 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <1>; + }; + }; + + gpio2: gpio@0c00 { + compatible = "snps,dw-apb-gpio"; + reg = <0x0c00 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portc: gpio-port@2 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <2>; + }; + }; + + gpio3: gpio@1000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x1000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portd: gpio-port@3 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <3>; + }; + }; + + aic: interrupt-controller@3800 { + compatible = "snps,dw-apb-ictl"; + reg = <0x3800 0x30>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + interrupts = ; + }; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; @@ -151,6 +241,36 @@ interrupts = ; }; + sm_gpio0: gpio@8000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x8000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + porte: gpio-port@4 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + + sm_gpio1: gpio@9000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x9000 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + portf: gpio-port@5 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <32>; + reg = <0>; + }; + }; + uart0: uart@d000 { compatible = "snps,dw-apb-uart"; reg = <0xd000 0x100>; -- cgit v1.2.3-70-g09d2 From 59995f55973e23d957f1dad13446554f6aef73d0 Mon Sep 17 00:00:00 2001 From: Jisheng Zhang Date: Fri, 18 Sep 2015 21:47:39 +0800 Subject: arm64: dts: add dts file for Marvell Berlin4CT STB board This patch adds dts for the Berlin4CT STB reference board which is also based on the Berlin4CT SoC. The Berlin4CT DMP board will be deprecated as time goes. Signed-off-by: Jisheng Zhang Signed-off-by: Sebastian Hesselbarth --- arch/arm64/boot/dts/marvell/Makefile | 1 + arch/arm64/boot/dts/marvell/berlin4ct-stb.dts | 66 +++++++++++++++++++++++++++ 2 files changed, 67 insertions(+) create mode 100644 arch/arm64/boot/dts/marvell/berlin4ct-stb.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile index e2f6afa7f849..348f4db4f313 100644 --- a/arch/arm64/boot/dts/marvell/Makefile +++ b/arch/arm64/boot/dts/marvell/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-dmp.dtb +dtb-$(CONFIG_ARCH_BERLIN) += berlin4ct-stb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts new file mode 100644 index 000000000000..348c37ecf069 --- /dev/null +++ b/arch/arm64/boot/dts/marvell/berlin4ct-stb.dts @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2015 Marvell Technology Group Ltd. + * + * Author: Jisheng Zhang + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "berlin4ct.dtsi" + +/ { + model = "Marvell BG4CT STB board"; + compatible = "marvell,berlin4ct-stb", "marvell,berlin4ct", "marvell,berlin"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* the first 16MB is for firmwares' usage */ + reg = <0 0x01000000 0 0x7f000000>; + }; +}; + +&uart0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From bc81beb80538cb4fc964baf1d7f43a2f9b58def0 Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Fri, 18 Sep 2015 19:28:22 +0800 Subject: ARM: at91/dt: ov2640: add hsync/vsync-active property On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel connection for ov2640. So we must set the hsync/vsync property (1 means active high). Otherwise, the connection would be seen as BT.656 or BT.1120. Signed-off-by: Josh Wu Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91sam9m10g45ek.dts | 2 ++ arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 ++ arch/arm/boot/dts/sama5d3xmb.dtsi | 2 ++ 3 files changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index d1ae60a855d4..9d16ef8453c5 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -198,6 +198,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi index 36de329340d1..52425a4ca97e 100644 --- a/arch/arm/boot/dts/at91sam9x5ek.dtsi +++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi @@ -66,6 +66,8 @@ isi_0: endpoint@0 { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 83bee7a3a617..89010422812d 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -87,6 +87,8 @@ isi_0: endpoint { remote-endpoint = <&ov2640_0>; bus-width = <8>; + vsync-active = <1>; + hsync-active = <1>; }; }; }; -- cgit v1.2.3-70-g09d2 From fcab303c015397c307ae4873e02598f89a4a3ef6 Mon Sep 17 00:00:00 2001 From: Ding Tianhong Date: Sun, 6 Sep 2015 17:34:35 +0800 Subject: arm64: dts: add dts files for Hisilicon Hip05-D02 Development Board Add initial dtsi file to support Hisilicon Hip05-D02 Board with support of CPUs in four clusters and each cluster has quard Cortex-A57. Also add dts file to support Hip05-D02 development board. Signed-off-by: Ding Tianhong Signed-off-by: Kefeng Wang Signed-off-by: Wei Xu --- arch/arm64/boot/dts/hisilicon/Makefile | 2 +- arch/arm64/boot/dts/hisilicon/hip05-d02.dts | 36 ++++ arch/arm64/boot/dts/hisilicon/hip05.dtsi | 271 ++++++++++++++++++++++++++++ 3 files changed, 308 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/hisilicon/hip05-d02.dts create mode 100644 arch/arm64/boot/dts/hisilicon/hip05.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/Makefile b/arch/arm64/boot/dts/hisilicon/Makefile index fa81a6ee6473..cd158b80e29b 100644 --- a/arch/arm64/boot/dts/hisilicon/Makefile +++ b/arch/arm64/boot/dts/hisilicon/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb +dtb-$(CONFIG_ARCH_HISI) += hi6220-hikey.dtb hip05-d02.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/hisilicon/hip05-d02.dts b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts new file mode 100644 index 000000000000..ae34e250456f --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip05-d02.dts @@ -0,0 +1,36 @@ +/** + * dts file for Hisilicon D02 Development Board + * + * Copyright (C) 2014,2015 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +/dts-v1/; + +#include "hip05.dtsi" + +/ { + model = "Hisilicon Hip05 D02 Development Board"; + compatible = "hisilicon,hip05-d02"; + + memory@00000000 { + device_type = "memory"; + reg = <0x0 0x00000000 0x0 0x80000000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + status = "ok"; +}; diff --git a/arch/arm64/boot/dts/hisilicon/hip05.dtsi b/arch/arm64/boot/dts/hisilicon/hip05.dtsi new file mode 100644 index 000000000000..4ff16d016e34 --- /dev/null +++ b/arch/arm64/boot/dts/hisilicon/hip05.dtsi @@ -0,0 +1,271 @@ +/** + * dts file for Hisilicon D02 Development Board + * + * Copyright (C) 2014,2015 Hisilicon Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + * + */ + +#include + +/ { + compatible = "hisilicon,hip05-d02"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + cluster1 { + core0 { + cpu = <&cpu4>; + }; + core1 { + cpu = <&cpu5>; + }; + core2 { + cpu = <&cpu6>; + }; + core3 { + cpu = <&cpu7>; + }; + }; + cluster2 { + core0 { + cpu = <&cpu8>; + }; + core1 { + cpu = <&cpu9>; + }; + core2 { + cpu = <&cpu10>; + }; + core3 { + cpu = <&cpu11>; + }; + }; + cluster3 { + core0 { + cpu = <&cpu12>; + }; + core1 { + cpu = <&cpu13>; + }; + core2 { + cpu = <&cpu14>; + }; + core3 { + cpu = <&cpu15>; + }; + }; + }; + + cpu0: cpu@20000 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20000>; + enable-method = "psci"; + }; + + cpu1: cpu@20001 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20001>; + enable-method = "psci"; + }; + + cpu2: cpu@20002 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20002>; + enable-method = "psci"; + }; + + cpu3: cpu@20003 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20003>; + enable-method = "psci"; + }; + + cpu4: cpu@20100 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20100>; + enable-method = "psci"; + }; + + cpu5: cpu@20101 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20101>; + enable-method = "psci"; + }; + + cpu6: cpu@20102 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20102>; + enable-method = "psci"; + }; + + cpu7: cpu@20103 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20103>; + enable-method = "psci"; + }; + + cpu8: cpu@20200 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20200>; + enable-method = "psci"; + }; + + cpu9: cpu@20201 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20201>; + enable-method = "psci"; + }; + + cpu10: cpu@20202 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20202>; + enable-method = "psci"; + }; + + cpu11: cpu@20203 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20203>; + enable-method = "psci"; + }; + + cpu12: cpu@20300 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20300>; + enable-method = "psci"; + }; + + cpu13: cpu@20301 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20301>; + enable-method = "psci"; + }; + + cpu14: cpu@20302 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20302>; + enable-method = "psci"; + }; + + cpu15: cpu@20303 { + device_type = "cpu"; + compatible = "arm,cortex-a57", "arm,armv8"; + reg = <0x20303>; + enable-method = "psci"; + }; + }; + + gic: interrupt-controller@8d000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + #redistributor-regions = <1>; + redistributor-stride = <0x0 0x30000>; + reg = <0x0 0x8d000000 0 0x10000>, /* GICD */ + <0x0 0x8d100000 0 0x300000>, /* GICR */ + <0x0 0xfe000000 0 0x10000>, /* GICC */ + <0x0 0xfe010000 0 0x10000>, /* GICH */ + <0x0 0xfe020000 0 0x10000>; /* GICV */ + interrupts = ; + + its_totems: interrupt-controller@8c000000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x8c000000 0x0 0x40000>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + refclk200mhz: refclk200mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + }; + + uart0: uart@80300000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x80300000 0x0 0x10000>; + interrupts = ; + clocks = <&refclk200mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: uart@80310000 { + compatible = "snps,dw-apb-uart"; + reg = <0x0 0x80310000 0x0 0x10000>; + interrupts = ; + clocks = <&refclk200mhz>; + clock-names = "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 6c8c58b38f17e92691dd648c0e3b66f1a6942433 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sat, 19 Sep 2015 13:25:54 +0200 Subject: ARM: BCM5301X: Netgear R6250 add USB GPIO Add GPIO number which is needed to activate the USB power supply. Signed-off-by: Hauke Mehrtens Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts index 64b8d10ccff8..ca92bba6a8c5 100644 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts @@ -24,6 +24,17 @@ reg = <0x00000000 0x08000000>; }; + axi@18000000 { + usb3@23000 { + reg = <0x00023000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; + }; + leds { compatible = "gpio-leds"; -- cgit v1.2.3-70-g09d2 From 23998645f6e73f7038347255228ae1c60f1598da Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 17 Sep 2015 12:15:02 +0200 Subject: ARM: berlin: dts: add the cpufreq-dt bindings on the BG2Q The BG2Q uses cpugreq-dt. Add the corresponding bindings. The operating points can be updated by the bootloader. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 380fa18a050e..32b871ed7a30 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -58,6 +58,17 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + /* Can be modified by the bootloader */ + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { -- cgit v1.2.3-70-g09d2 From 2e1782add72fbbb7309b2c120ce20a543a23f5b3 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 17 Sep 2015 12:15:03 +0200 Subject: ARM: berlin: dts: add the cpufreq-dt bindings on the BG2 The BG2 uses cpugreq-dt. Add the corresponding bindings. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 40cf2623c4f9..11e446e5fb0b 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -63,6 +63,16 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 1200000 1200000 + 1000000 1200000 + 800000 1200000 + 600000 1200000 + >; }; cpu@1 { -- cgit v1.2.3-70-g09d2 From 1e5c50572d9e587c88d6e976e582a9b3377f9153 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Thu, 17 Sep 2015 12:15:04 +0200 Subject: ARM: berlin: dts: add the cpufreq-dt bindings on the BG2CD The BG2CD uses cpugreq-dt. Add the corresponding bindings. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 6246aecaa0c5..75b14211559a 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -61,6 +61,14 @@ device_type = "cpu"; next-level-cache = <&l2>; reg = <0>; + + clocks = <&chip_clk CLKID_CPU>; + clock-latency = <100000>; + operating-points = < + /* kHz uV */ + 800000 1200000 + 600000 1200000 + >; }; }; -- cgit v1.2.3-70-g09d2 From de192ef14391dbec5057cf6c798aeb5fe0194e9e Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:42 -0700 Subject: ARM: dts: consolidate aliases for Cygnus dt files Move aliases into bcm-cygnus.dtsi to avoid duplications in Cygnus dts files Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ++++ arch/arm/boot/dts/bcm911360_entphn.dts | 4 ---- arch/arm/boot/dts/bcm911360k.dts | 4 ---- arch/arm/boot/dts/bcm958300k.dts | 4 ---- arch/arm/boot/dts/bcm958305k.dts | 4 ---- 5 files changed, 4 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index e1ac07a16f92..30903ba8f9f6 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -40,6 +40,10 @@ model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart3; + }; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 7db484323fd6..0e1320e78897 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -39,10 +39,6 @@ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)"; compatible = "brcm,bcm11360", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts index 9658d4f62d59..2af40c642ae3 100644 --- a/arch/arm/boot/dts/bcm911360k.dts +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -38,10 +38,6 @@ model = "Cygnus SVK (BCM911360K)"; compatible = "brcm,bcm11360", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index 2f63052f9d48..75e50f04cff2 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -38,10 +38,6 @@ model = "Cygnus SVK (BCM958300K)"; compatible = "brcm,bcm58300", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 56b429abbedb..bf62e1bc22db 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -38,10 +38,6 @@ model = "Cygnus Wireless Audio (BCM958305K)"; compatible = "brcm,bcm58305", "brcm,cygnus"; - aliases { - serial0 = &uart3; - }; - chosen { stdout-path = &uart3; bootargs = "console=ttyS0,115200"; -- cgit v1.2.3-70-g09d2 From 5b159b62eb2a6799d9dbe998d7635b346ca6fdf8 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:43 -0700 Subject: ARM: dts: Use label for device nodes in Cygnus dts Use label instead of full path to reference device nodes in Cygnus dts files Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm911360_entphn.dts | 8 +++---- arch/arm/boot/dts/bcm911360k.dts | 6 ++--- arch/arm/boot/dts/bcm958300k.dts | 40 +++++++++++++++++----------------- arch/arm/boot/dts/bcm958305k.dts | 6 ++--- 4 files changed, 30 insertions(+), 30 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index 0e1320e78897..f791a3b2b8db 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -44,10 +44,6 @@ bootargs = "console=ttyS0,115200"; }; - uart3: serial@18023000 { - status = "okay"; - }; - gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; @@ -60,3 +56,7 @@ }; }; }; + +&uart3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts index 2af40c642ae3..814011c331d0 100644 --- a/arch/arm/boot/dts/bcm911360k.dts +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -42,8 +42,8 @@ stdout-path = &uart3; bootargs = "console=ttyS0,115200"; }; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index 75e50f04cff2..d8dc9f045640 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -42,32 +42,32 @@ stdout-path = &uart3; bootargs = "console=ttyS0,115200"; }; +}; - pcie0: pcie@18012000 { - status = "okay"; - }; +&pcie0 { + status = "okay"; +}; - pcie1: pcie@18013000 { - status = "okay"; - }; +&pcie1 { + status = "okay"; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; +}; - nand: nand@18046000 { - nandcs@1 { - compatible = "brcm,nandcs"; - reg = <0>; - nand-on-flash-bbt; +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; - nand-ecc-strength = <24>; - nand-ecc-step-size = <1024>; + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; - brcm,nand-oob-sector-size = <27>; - }; + brcm,nand-oob-sector-size = <27>; }; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index bf62e1bc22db..af11a8e30d09 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -42,8 +42,8 @@ stdout-path = &uart3; bootargs = "console=ttyS0,115200"; }; +}; - uart3: serial@18023000 { - status = "okay"; - }; +&uart3 { + status = "okay"; }; -- cgit v1.2.3-70-g09d2 From ef5b812a4e8d088836e67ade113562ca5ad4579e Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:44 -0700 Subject: ARM: dts: Put Cygnus core components under core bus Put all Cygnus core components into "core" node of type "simple-bus" in bcm-cygnus.dtsi Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 54 ++++++++++++++++++++++----------------- 1 file changed, 30 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 30903ba8f9f6..97fd305bc8e8 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -58,6 +58,36 @@ /include/ "bcm-cygnus-clock.dtsi" + core { + compatible = "simple-bus"; + ranges = <0x00000000 0x19000000 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + timer@20200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x20200 0x100>; + interrupts = ; + clocks = <&periph_clk>; + }; + + gic: interrupt-controller@21000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x21000 0x1000>, + <0x20100 0x100>; + }; + + L2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x22000 0x1000>; + cache-unified; + cache-level = <2>; + }; + }; + pinctrl: pinctrl@0x0301d0c8 { compatible = "brcm,cygnus-pinmux"; reg = <0x0301d0c8 0x30>, @@ -227,28 +257,4 @@ brcm,nand-has-wp; }; - - gic: interrupt-controller@19021000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - #address-cells = <0>; - interrupt-controller; - reg = <0x19021000 0x1000>, - <0x19020100 0x100>; - }; - - L2: l2-cache { - compatible = "arm,pl310-cache"; - reg = <0x19022000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - timer@19020200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x19020200 0x100>; - interrupts = ; - clocks = <&periph_clk>; - }; - }; -- cgit v1.2.3-70-g09d2 From 0f0b21a83ad2285cd14082c7cfae57a0288dd813 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:45 -0700 Subject: ARM: dts: Move all Cygnus peripherals into axi bus Move all Cygnus peripherals to be under the "axi" bus node of type "simple-bus" Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 279 +++++++++++++++++++------------------- 1 file changed, 140 insertions(+), 139 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 97fd305bc8e8..5ee7543b5894 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -88,173 +88,174 @@ }; }; - pinctrl: pinctrl@0x0301d0c8 { - compatible = "brcm,cygnus-pinmux"; - reg = <0x0301d0c8 0x30>, - <0x0301d24c 0x2c>; - }; + axi { + compatible = "simple-bus"; + ranges; + #address-cells = <1>; + #size-cells = <1>; - gpio_crmu: gpio@03024800 { - compatible = "brcm,cygnus-crmu-gpio"; - reg = <0x03024800 0x50>, - <0x03024008 0x18>; - #gpio-cells = <2>; - gpio-controller; - }; + pinctrl: pinctrl@0x0301d0c8 { + compatible = "brcm,cygnus-pinmux"; + reg = <0x0301d0c8 0x30>, + <0x0301d24c 0x2c>; + }; - gpio_ccm: gpio@1800a000 { - compatible = "brcm,cygnus-ccm-gpio"; - reg = <0x1800a000 0x50>, - <0x0301d164 0x20>; - #gpio-cells = <2>; - gpio-controller; - interrupts = ; - interrupt-controller; - }; + gpio_crmu: gpio@03024800 { + compatible = "brcm,cygnus-crmu-gpio"; + reg = <0x03024800 0x50>, + <0x03024008 0x18>; + #gpio-cells = <2>; + gpio-controller; + }; - gpio_asiu: gpio@180a5000 { - compatible = "brcm,cygnus-asiu-gpio"; - reg = <0x180a5000 0x668>; - #gpio-cells = <2>; - gpio-controller; + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; + }; - pinmux = <&pinctrl>; + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; - interrupt-controller; - interrupts = ; - }; + pinmux = <&pinctrl>; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,amba-bus", "simple-bus"; - interrupt-parent = <&gic>; - ranges; + interrupt-controller; + interrupts = ; + }; - wdt@18009000 { - compatible = "arm,sp805" , "arm,primecell"; - reg = <0x18009000 0x1000>; - interrupts = ; - clocks = <&axi81_clk>; - clock-names = "apb_pclk"; + wdt0: wdt@18009000 { + compatible = "arm,sp805" , "arm,primecell"; + reg = <0x18009000 0x1000>; + interrupts = ; + clocks = <&axi81_clk>; + clock-names = "apb_pclk"; }; - }; - i2c0: i2c@18008000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <100000>; - status = "disabled"; - }; + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; - i2c1: i2c@1800b000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x1800b000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <100000>; - status = "disabled"; - }; + i2c1: i2c@1800b000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x1800b000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; + }; - pcie0: pcie@18012000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18012000 0x1000>; + pcie0: pcie@18012000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18012000 0x1000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>; - linux,pci-domain = <0>; + linux,pci-domain = <0>; - bus-range = <0x00 0xff>; + bus-range = <0x00 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x28000000 0 0x00010000 - 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x28000000 0 0x00010000 + 0x82000000 0 0x20000000 0x20000000 0 0x04000000>; - status = "disabled"; - }; + status = "disabled"; + }; - pcie1: pcie@18013000 { - compatible = "brcm,iproc-pcie"; - reg = <0x18013000 0x1000>; + pcie1: pcie@18013000 { + compatible = "brcm,iproc-pcie"; + reg = <0x18013000 0x1000>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0>; - interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>; - linux,pci-domain = <1>; + linux,pci-domain = <1>; - bus-range = <0x00 0xff>; + bus-range = <0x00 0xff>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - ranges = <0x81000000 0 0 0x48000000 0 0x00010000 - 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x48000000 0 0x00010000 + 0x82000000 0 0x40000000 0x40000000 0 0x04000000>; - status = "disabled"; - }; + status = "disabled"; + }; - uart0: serial@18020000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = ; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart0: serial@18020000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - uart1: serial@18021000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18021000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = ; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart1: serial@18021000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18021000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - uart2: serial@18022000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18020000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = ; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart2: serial@18022000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18020000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - uart3: serial@18023000 { - compatible = "snps,dw-apb-uart"; - reg = <0x18023000 0x100>; - reg-shift = <2>; - reg-io-width = <4>; - interrupts = ; - clocks = <&axi81_clk>; - clock-frequency = <100000000>; - status = "disabled"; - }; + uart3: serial@18023000 { + compatible = "snps,dw-apb-uart"; + reg = <0x18023000 0x100>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clocks = <&axi81_clk>; + clock-frequency = <100000000>; + status = "disabled"; + }; - nand: nand@18046000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; - reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; - reg-names = "nand", "iproc-idm", "iproc-ext"; - interrupts = ; + nand: nand@18046000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", + "brcm,brcmnand"; + reg = <0x18046000 0x600>, <0xf8105408 0x600>, + <0x18046f00 0x20>; + reg-names = "nand", "iproc-idm", "iproc-ext"; + interrupts = ; - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - brcm,nand-has-wp; + brcm,nand-has-wp; + }; }; }; -- cgit v1.2.3-70-g09d2 From 9c5101f7a253c4f2f9bbe47e8bb681b63f4c65f5 Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:46 -0700 Subject: ARM: dts: Reorder Cygnus peripherals Reorder all Cygnus peripherals based on base register addresses in bcm-cygnus.dtsi Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 56 +++++++++++++++++++-------------------- 1 file changed, 28 insertions(+), 28 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 5ee7543b5894..33ec6a51e45d 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -108,26 +108,14 @@ gpio-controller; }; - gpio_ccm: gpio@1800a000 { - compatible = "brcm,cygnus-ccm-gpio"; - reg = <0x1800a000 0x50>, - <0x0301d164 0x20>; - #gpio-cells = <2>; - gpio-controller; - interrupts = ; - interrupt-controller; - }; - - gpio_asiu: gpio@180a5000 { - compatible = "brcm,cygnus-asiu-gpio"; - reg = <0x180a5000 0x668>; - #gpio-cells = <2>; - gpio-controller; - - pinmux = <&pinctrl>; - - interrupt-controller; - interrupts = ; + i2c0: i2c@18008000 { + compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; + reg = <0x18008000 0x100>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clock-frequency = <100000>; + status = "disabled"; }; wdt0: wdt@18009000 { @@ -138,14 +126,14 @@ clock-names = "apb_pclk"; }; - i2c0: i2c@18008000 { - compatible = "brcm,cygnus-iproc-i2c", "brcm,iproc-i2c"; - reg = <0x18008000 0x100>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = ; - clock-frequency = <100000>; - status = "disabled"; + gpio_ccm: gpio@1800a000 { + compatible = "brcm,cygnus-ccm-gpio"; + reg = <0x1800a000 0x50>, + <0x0301d164 0x20>; + #gpio-cells = <2>; + gpio-controller; + interrupts = ; + interrupt-controller; }; i2c1: i2c@1800b000 { @@ -257,5 +245,17 @@ brcm,nand-has-wp; }; + + gpio_asiu: gpio@180a5000 { + compatible = "brcm,cygnus-asiu-gpio"; + reg = <0x180a5000 0x668>; + #gpio-cells = <2>; + gpio-controller; + + pinmux = <&pinctrl>; + + interrupt-controller; + interrupts = ; + }; }; }; -- cgit v1.2.3-70-g09d2 From 894526cd466e4cb5fd88afbc5ff573b14933321f Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:47 -0700 Subject: ARM: dts: Enable various peripherals on bcm958305k This patch enables various peripherals on Broadcom Cygnus wireless audio board (bcm958305k). These peripherals include I2C, PCIe, and NAND Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm958305k.dts | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index af11a8e30d09..9863a19ab1bd 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -44,6 +44,38 @@ }; }; +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + &uart3 { status = "okay"; }; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; -- cgit v1.2.3-70-g09d2 From 2e561f92dc12ea3de131d337516d58862fd7ef2c Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:48 -0700 Subject: ARM: dts: Enable NAND support on bcm911360_entphn This patch enables NAND support on Broadcom Cygnus form factor board (bcm911360_entphn) Signed-off-by: Ray Jui Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm911360_entphn.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm911360_entphn.dts b/arch/arm/boot/dts/bcm911360_entphn.dts index f791a3b2b8db..8b3800f46288 100644 --- a/arch/arm/boot/dts/bcm911360_entphn.dts +++ b/arch/arm/boot/dts/bcm911360_entphn.dts @@ -60,3 +60,19 @@ &uart3 { status = "okay"; }; + +&nand { + nandcs@1 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + }; +}; -- cgit v1.2.3-70-g09d2 From 35e372a3a1f016648f278aeb7b55fe347b6699da Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:49 -0700 Subject: ARM: dts: enable touchscreen support on Cygnus This patch enables touchscreen support on bcm958300k and bcm958305k. Touchscreen is connected to these boards through the bcm9hmidc daughter card, and therefore also adding bcm9hmidc.dtsi that describes the daughter card Signed-off-by: Ray Jui Reviewed-by: Vikram Prakash Reviewed-by: Scott Branden Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 10 ++++++++++ arch/arm/boot/dts/bcm958300k.dts | 1 + arch/arm/boot/dts/bcm958305k.dts | 1 + arch/arm/boot/dts/bcm9hmidc.dtsi | 42 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/bcm9hmidc.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 33ec6a51e45d..24e058c73700 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -32,6 +32,7 @@ #include #include +#include #include "skeleton.dtsi" @@ -257,5 +258,14 @@ interrupt-controller; interrupts = ; }; + + touchscreen: tsc@180a6000 { + compatible = "brcm,iproc-touchscreen"; + reg = <0x180a6000 0x40>; + clocks = <&asiu_clks BCM_CYGNUS_ASIU_ADC_CLK>; + clock-names = "tsc_clk"; + interrupts = ; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index d8dc9f045640..2e31581dc25e 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus SVK (BCM958300K)"; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 9863a19ab1bd..288a637abf3b 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-cygnus.dtsi" +#include "bcm9hmidc.dtsi" / { model = "Cygnus Wireless Audio (BCM958305K)"; diff --git a/arch/arm/boot/dts/bcm9hmidc.dtsi b/arch/arm/boot/dts/bcm9hmidc.dtsi new file mode 100644 index 000000000000..65397c088335 --- /dev/null +++ b/arch/arm/boot/dts/bcm9hmidc.dtsi @@ -0,0 +1,42 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2015 Broadcom Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + * Broadcom human machine interface daughter card (bcm9hmidc) installed on + * bcm958300k/bcm958305k boards + */ + +&touchscreen { + touchscreen-inverted-x; + touchscreen-inverted-y; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 08668d9de98193936a082f36c105fc3de168b69b Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Mon, 21 Sep 2015 15:12:50 -0700 Subject: ARM: dts: fix Cygnus nand device node The third compatible string "brcm,brcmnand" in bcm-cygnus.dtsi nand node is incorrect, redundant and should be removed. "brcm,brcmnand" is meant to be used by STB based Broadcom SoCs. All iProc based SoCs should use "brcm,nand-iproc". Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index 24e058c73700..b5f9f34183fe 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -234,8 +234,7 @@ }; nand: nand@18046000 { - compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", - "brcm,brcmnand"; + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x18046000 0x600>, <0xf8105408 0x600>, <0x18046f00 0x20>; reg-names = "nand", "iproc-idm", "iproc-ext"; -- cgit v1.2.3-70-g09d2 From 7f16cb676c006d87a97ed2e51815daf1fa17eb29 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 Sep 2015 17:37:02 +0200 Subject: ARM: at91/dt: add sama5d2 pinmux Add sama5d2 pin descriptions. Signed-off-by: Ludovic Desroches Acked-by: Linus Walleij Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/sama5d2-pinfunc.h | 880 ++++++++++++++++++++++++++++++++++++ 1 file changed, 880 insertions(+) create mode 100644 arch/arm/boot/dts/sama5d2-pinfunc.h (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d2-pinfunc.h b/arch/arm/boot/dts/sama5d2-pinfunc.h new file mode 100644 index 000000000000..1afe24629d1f --- /dev/null +++ b/arch/arm/boot/dts/sama5d2-pinfunc.h @@ -0,0 +1,880 @@ +#define PINMUX_PIN(no, func, ioset) \ +(((no) & 0xffff) | (((func) & 0xf) << 16) | (((ioset) & 0xff) << 20)) + +#define PIN_PA0 0 +#define PIN_PA0__GPIO PINMUX_PIN(PIN_PA0, 0, 0) +#define PIN_PA0__SDMMC0_CK PINMUX_PIN(PIN_PA0, 1, 1) +#define PIN_PA0__QSPI0_SCK PINMUX_PIN(PIN_PA0, 2, 1) +#define PIN_PA0__D0 PINMUX_PIN(PIN_PA0, 6, 2) +#define PIN_PA1 1 +#define PIN_PA1__GPIO PINMUX_PIN(PIN_PA1, 0, 0) +#define PIN_PA1__SDMMC0_CMD PINMUX_PIN(PIN_PA1, 1, 1) +#define PIN_PA1__QSPI0_CS PINMUX_PIN(PIN_PA1, 2, 1) +#define PIN_PA1__D1 PINMUX_PIN(PIN_PA1, 6, 2) +#define PIN_PA2 2 +#define PIN_PA2__GPIO PINMUX_PIN(PIN_PA2, 0, 0) +#define PIN_PA2__SDMMC0_DAT0 PINMUX_PIN(PIN_PA2, 1, 1) +#define PIN_PA2__QSPI0_IO0 PINMUX_PIN(PIN_PA2, 2, 1) +#define PIN_PA2__D2 PINMUX_PIN(PIN_PA2, 6, 2) +#define PIN_PA3 3 +#define PIN_PA3__GPIO PINMUX_PIN(PIN_PA3, 0, 0) +#define PIN_PA3__SDMMC0_DAT1 PINMUX_PIN(PIN_PA3, 1, 1) +#define PIN_PA3__QSPI0_IO1 PINMUX_PIN(PIN_PA3, 2, 1) +#define PIN_PA3__D3 PINMUX_PIN(PIN_PA3, 6, 2) +#define PIN_PA4 4 +#define PIN_PA4__GPIO PINMUX_PIN(PIN_PA4, 0, 0) +#define PIN_PA4__SDMMC0_DAT2 PINMUX_PIN(PIN_PA4, 1, 1) +#define PIN_PA4__QSPI0_IO2 PINMUX_PIN(PIN_PA4, 2, 1) +#define PIN_PA4__D4 PINMUX_PIN(PIN_PA4, 6, 2) +#define PIN_PA5 5 +#define PIN_PA5__GPIO PINMUX_PIN(PIN_PA5, 0, 0) +#define PIN_PA5__SDMMC0_DAT3 PINMUX_PIN(PIN_PA5, 1, 1) +#define PIN_PA5__QSPI0_IO3 PINMUX_PIN(PIN_PA5, 2, 1) +#define PIN_PA5__D5 PINMUX_PIN(PIN_PA5, 6, 2) +#define PIN_PA6 6 +#define PIN_PA6__GPIO PINMUX_PIN(PIN_PA6, 0, 0) +#define PIN_PA6__SDMMC0_DAT4 PINMUX_PIN(PIN_PA6, 1, 1) +#define PIN_PA6__QSPI1_SCK PINMUX_PIN(PIN_PA6, 2, 1) +#define PIN_PA6__TIOA5 PINMUX_PIN(PIN_PA6, 4, 1) +#define PIN_PA6__FLEXCOM2_IO0 PINMUX_PIN(PIN_PA6, 5, 1) +#define PIN_PA6__D6 PINMUX_PIN(PIN_PA6, 6, 2) +#define PIN_PA7 7 +#define PIN_PA7__GPIO PINMUX_PIN(PIN_PA7, 0, 0) +#define PIN_PA7__SDMMC0_DAT5 PINMUX_PIN(PIN_PA7, 1, 1) +#define PIN_PA7__QSPI1_IO0 PINMUX_PIN(PIN_PA7, 2, 1) +#define PIN_PA7__TIOB5 PINMUX_PIN(PIN_PA7, 4, 1) +#define PIN_PA7__FLEXCOM2_IO1 PINMUX_PIN(PIN_PA7, 5, 1) +#define PIN_PA7__D7 PINMUX_PIN(PIN_PA7, 6, 2) +#define PIN_PA8 8 +#define PIN_PA8__GPIO PINMUX_PIN(PIN_PA8, 0, 0) +#define PIN_PA8__SDMMC0_DAT6 PINMUX_PIN(PIN_PA8, 1, 1) +#define PIN_PA8__QSPI1_IO1 PINMUX_PIN(PIN_PA8, 2, 1) +#define PIN_PA8__TCLK5 PINMUX_PIN(PIN_PA8, 4, 1) +#define PIN_PA8__FLEXCOM2_IO2 PINMUX_PIN(PIN_PA8, 5, 1) +#define PIN_PA8__NWE_NANDWE PINMUX_PIN(PIN_PA8, 6, 2) +#define PIN_PA9 9 +#define PIN_PA9__GPIO PINMUX_PIN(PIN_PA9, 0, 0) +#define PIN_PA9__SDMMC0_DAT7 PINMUX_PIN(PIN_PA9, 1, 1) +#define PIN_PA9__QSPI1_IO2 PINMUX_PIN(PIN_PA9, 2, 1) +#define PIN_PA9__TIOA4 PINMUX_PIN(PIN_PA9, 4, 1) +#define PIN_PA9__FLEXCOM2_IO3 PINMUX_PIN(PIN_PA9, 5, 1) +#define PIN_PA9__NCS3 PINMUX_PIN(PIN_PA9, 6, 2) +#define PIN_PA10 10 +#define PIN_PA10__GPIO PINMUX_PIN(PIN_PA10, 0, 0) +#define PIN_PA10__SDMMC0_RSTN PINMUX_PIN(PIN_PA10, 1, 1) +#define PIN_PA10__QSPI1_IO3 PINMUX_PIN(PIN_PA10, 2, 1) +#define PIN_PA10__TIOB4 PINMUX_PIN(PIN_PA10, 4, 1) +#define PIN_PA10__FLEXCOM2_IO4 PINMUX_PIN(PIN_PA10, 5, 1) +#define PIN_PA10__A21_NANDALE PINMUX_PIN(PIN_PA10, 6, 2) +#define PIN_PA11 11 +#define PIN_PA11__GPIO PINMUX_PIN(PIN_PA11, 0, 0) +#define PIN_PA11__SDMMC0_VDDSEL PINMUX_PIN(PIN_PA11, 1, 1) +#define PIN_PA11__QSPI1_CS PINMUX_PIN(PIN_PA11, 2, 1) +#define PIN_PA11__TCLK4 PINMUX_PIN(PIN_PA11, 4, 1) +#define PIN_PA11__A22_NANDCLE PINMUX_PIN(PIN_PA11, 6, 2) +#define PIN_PA12 12 +#define PIN_PA12__GPIO PINMUX_PIN(PIN_PA12, 0, 0) +#define PIN_PA12__SDMMC0_WP PINMUX_PIN(PIN_PA12, 1, 1) +#define PIN_PA12__IRQ PINMUX_PIN(PIN_PA12, 2, 1) +#define PIN_PA12__NRD_NANDOE PINMUX_PIN(PIN_PA12, 6, 2) +#define PIN_PA13 13 +#define PIN_PA13__GPIO PINMUX_PIN(PIN_PA13, 0, 0) +#define PIN_PA13__SDMMC0_CD PINMUX_PIN(PIN_PA13, 1, 1) +#define PIN_PA13__FLEXCOM3_IO1 PINMUX_PIN(PIN_PA13, 5, 1) +#define PIN_PA13__D8 PINMUX_PIN(PIN_PA13, 6, 2) +#define PIN_PA14 14 +#define PIN_PA14__GPIO PINMUX_PIN(PIN_PA14, 0, 0) +#define PIN_PA14__SPI0_SPCK PINMUX_PIN(PIN_PA14, 1, 1) +#define PIN_PA14__TK1 PINMUX_PIN(PIN_PA14, 2, 1) +#define PIN_PA14__QSPI0_SCK PINMUX_PIN(PIN_PA14, 3, 2) +#define PIN_PA14__I2SC1_MCK PINMUX_PIN(PIN_PA14, 4, 2) +#define PIN_PA14__FLEXCOM3_IO2 PINMUX_PIN(PIN_PA14, 5, 1) +#define PIN_PA14__D9 PINMUX_PIN(PIN_PA14, 6, 2) +#define PIN_PA15 14 +#define PIN_PA15__GPIO PINMUX_PIN(PIN_PA15, 0, 0) +#define PIN_PA15__SPI0_MOSI PINMUX_PIN(PIN_PA15, 1, 1) +#define PIN_PA15__TF1 PINMUX_PIN(PIN_PA15, 2, 1) +#define PIN_PA15__QSPI0_CS PINMUX_PIN(PIN_PA15, 3, 2) +#define PIN_PA15__I2SC1_CK PINMUX_PIN(PIN_PA15, 4, 2) +#define PIN_PA15__FLEXCOM3_IO0 PINMUX_PIN(PIN_PA15, 5, 1) +#define PIN_PA15__D10 PINMUX_PIN(PIN_PA15, 6, 2) +#define PIN_PA16 16 +#define PIN_PA16__GPIO PINMUX_PIN(PIN_PA16, 0, 0) +#define PIN_PA16__SPI0_MISO PINMUX_PIN(PIN_PA16, 1, 1) +#define PIN_PA16__TD1 PINMUX_PIN(PIN_PA16, 2, 1) +#define PIN_PA16__QSPI0_IO0 PINMUX_PIN(PIN_PA16, 3, 2) +#define PIN_PA16__I2SC1_WS PINMUX_PIN(PIN_PA16, 4, 2) +#define PIN_PA16__FLEXCOM3_IO3 PINMUX_PIN(PIN_PA16, 5, 1) +#define PIN_PA16__D11 PINMUX_PIN(PIN_PA16, 6, 2) +#define PIN_PA17 17 +#define PIN_PA17__GPIO PINMUX_PIN(PIN_PA17, 0, 0) +#define PIN_PA17__SPI0_NPCS0 PINMUX_PIN(PIN_PA17, 1, 1) +#define PIN_PA17__RD1 PINMUX_PIN(PIN_PA17, 2, 1) +#define PIN_PA17__QSPI0_IO1 PINMUX_PIN(PIN_PA17, 3, 2) +#define PIN_PA17__I2SC1_DI0 PINMUX_PIN(PIN_PA17, 4, 2) +#define PIN_PA17__FLEXCOM3_IO4 PINMUX_PIN(PIN_PA17, 5, 1) +#define PIN_PA17__D12 PINMUX_PIN(PIN_PA17, 6, 2) +#define PIN_PA18 18 +#define PIN_PA18__GPIO PINMUX_PIN(PIN_PA18, 0, 0) +#define PIN_PA18__SPI0_NPCS1 PINMUX_PIN(PIN_PA18, 1, 1) +#define PIN_PA18__RK1 PINMUX_PIN(PIN_PA18, 2, 1) +#define PIN_PA18__QSPI0_IO2 PINMUX_PIN(PIN_PA18, 3, 2) +#define PIN_PA18__I2SC1_DO0 PINMUX_PIN(PIN_PA18, 4, 2) +#define PIN_PA18__SDMMC1_DAT0 PINMUX_PIN(PIN_PA18, 5, 1) +#define PIN_PA18__D13 PINMUX_PIN(PIN_PA18, 6, 2) +#define PIN_PA19 19 +#define PIN_PA19__GPIO PINMUX_PIN(PIN_PA19, 0, 0) +#define PIN_PA19__SPI0_NPCS2 PINMUX_PIN(PIN_PA19, 1, 1) +#define PIN_PA19__RF1 PINMUX_PIN(PIN_PA19, 2, 1) +#define PIN_PA19__QSPI0_IO3 PINMUX_PIN(PIN_PA19, 3, 2) +#define PIN_PA19__TIOA0 PINMUX_PIN(PIN_PA19, 4, 1) +#define PIN_PA19__SDMMC1_DAT1 PINMUX_PIN(PIN_PA19, 5, 1) +#define PIN_PA19__D14 PINMUX_PIN(PIN_PA19, 6, 2) +#define PIN_PA20 20 +#define PIN_PA20__GPIO PINMUX_PIN(PIN_PA20, 0, 0) +#define PIN_PA20__SPI0_NPCS3 PINMUX_PIN(PIN_PA20, 1, 1) +#define PIN_PA20__TIOB0 PINMUX_PIN(PIN_PA20, 4, 1) +#define PIN_PA20__SDMMC1_DAT2 PINMUX_PIN(PIN_PA20, 5, 1) +#define PIN_PA20__D15 PINMUX_PIN(PIN_PA20, 6, 2) +#define PIN_PA21 21 +#define PIN_PA21__GPIO PINMUX_PIN(PIN_PA21, 0, 0) +#define PIN_PA21__IRQ PINMUX_PIN(PIN_PA21, 1, 2) +#define PIN_PA21__PCK2 PINMUX_PIN(PIN_PA21, 2, 3) +#define PIN_PA21__TCLK0 PINMUX_PIN(PIN_PA21, 4, 1) +#define PIN_PA21__SDMMC1_DAT3 PINMUX_PIN(PIN_PA21, 5, 1) +#define PIN_PA21__NANDRDY PINMUX_PIN(PIN_PA21, 6, 2) +#define PIN_PA22 22 +#define PIN_PA22__GPIO PINMUX_PIN(PIN_PA22, 0, 0) +#define PIN_PA22__FLEXCOM1_IO2 PINMUX_PIN(PIN_PA22, 1, 1) +#define PIN_PA22__D0 PINMUX_PIN(PIN_PA22, 2, 1) +#define PIN_PA22__TCK PINMUX_PIN(PIN_PA22, 3, 4) +#define PIN_PA22__SPI1_SPCK PINMUX_PIN(PIN_PA22, 4, 2) +#define PIN_PA22__SDMMC1_CK PINMUX_PIN(PIN_PA22, 5, 1) +#define PIN_PA22__QSPI0_SCK PINMUX_PIN(PIN_PA22, 6, 3) +#define PIN_PA23 23 +#define PIN_PA23__GPIO PINMUX_PIN(PIN_PA23, 0, 0) +#define PIN_PA23__FLEXCOM1_IO1 PINMUX_PIN(PIN_PA23, 1, 1) +#define PIN_PA23__D1 PINMUX_PIN(PIN_PA23, 2, 1) +#define PIN_PA23__TDI PINMUX_PIN(PIN_PA23, 3, 4) +#define PIN_PA23__SPI1_MOSI PINMUX_PIN(PIN_PA23, 4, 2) +#define PIN_PA23__QSPI0_CS PINMUX_PIN(PIN_PA23, 6, 3) +#define PIN_PA24 24 +#define PIN_PA24__GPIO PINMUX_PIN(PIN_PA24, 0, 0) +#define PIN_PA24__FLEXCOM1_IO0 PINMUX_PIN(PIN_PA24, 1, 1) +#define PIN_PA24__D2 PINMUX_PIN(PIN_PA24, 2, 1) +#define PIN_PA24__TDO PINMUX_PIN(PIN_PA24, 3, 4) +#define PIN_PA24__SPI1_MISO PINMUX_PIN(PIN_PA24, 4, 2) +#define PIN_PA24__QSPI0_IO0 PINMUX_PIN(PIN_PA24, 6, 3) +#define PIN_PA25 25 +#define PIN_PA25__GPIO PINMUX_PIN(PIN_PA25, 0, 0) +#define PIN_PA25__FLEXCOM1_IO3 PINMUX_PIN(PIN_PA25, 1, 1) +#define PIN_PA25__D3 PINMUX_PIN(PIN_PA25, 2, 1) +#define PIN_PA25__TMS PINMUX_PIN(PIN_PA25, 3, 4) +#define PIN_PA25__SPI1_NPCS0 PINMUX_PIN(PIN_PA25, 4, 2) +#define PIN_PA25__QSPI0_IO1 PINMUX_PIN(PIN_PA25, 6, 3) +#define PIN_PA26 26 +#define PIN_PA26__GPIO PINMUX_PIN(PIN_PA26, 0, 0) +#define PIN_PA26__FLEXCOM1_IO4 PINMUX_PIN(PIN_PA26, 1, 1) +#define PIN_PA26__D4 PINMUX_PIN(PIN_PA26, 2, 1) +#define PIN_PA26__NTRST PINMUX_PIN(PIN_PA26, 3, 4) +#define PIN_PA26__SPI1_NPCS1 PINMUX_PIN(PIN_PA26, 4, 2) +#define PIN_PA26__QSPI0_IO2 PINMUX_PIN(PIN_PA26, 6, 3) +#define PIN_PA27 27 +#define PIN_PA27__GPIO PINMUX_PIN(PIN_PA27, 0, 0) +#define PIN_PA27__TIOA1 PINMUX_PIN(PIN_PA27, 1, 2) +#define PIN_PA27__D5 PINMUX_PIN(PIN_PA27, 2, 1) +#define PIN_PA27__SPI0_NPCS2 PINMUX_PIN(PIN_PA27, 3, 2) +#define PIN_PA27__SPI1_NPCS2 PINMUX_PIN(PIN_PA27, 4, 2) +#define PIN_PA27__SDMMC1_RSTN PINMUX_PIN(PIN_PA27, 5, 1) +#define PIN_PA27__QSPI0_IO3 PINMUX_PIN(PIN_PA27, 6, 3) +#define PIN_PA28 28 +#define PIN_PA28__GPIO PINMUX_PIN(PIN_PA28, 0, 0) +#define PIN_PA28__TIOB1 PINMUX_PIN(PIN_PA28, 1, 2) +#define PIN_PA28__D6 PINMUX_PIN(PIN_PA28, 2, 1) +#define PIN_PA28__SPI0_NPCS3 PINMUX_PIN(PIN_PA28, 3, 2) +#define PIN_PA28__SPI1_NPCS3 PINMUX_PIN(PIN_PA28, 4, 2) +#define PIN_PA28__SDMMC1_CMD PINMUX_PIN(PIN_PA28, 5, 1) +#define PIN_PA28__CLASSD_L0 PINMUX_PIN(PIN_PA28, 6, 1) +#define PIN_PA29 29 +#define PIN_PA29__GPIO PINMUX_PIN(PIN_PA29, 0, 0) +#define PIN_PA29__TCLK1 PINMUX_PIN(PIN_PA29, 1, 2) +#define PIN_PA29__D7 PINMUX_PIN(PIN_PA29, 2, 1) +#define PIN_PA29__SPI0_NPCS1 PINMUX_PIN(PIN_PA29, 3, 2) +#define PIN_PA29__SDMMC1_WP PINMUX_PIN(PIN_PA29, 5, 1) +#define PIN_PA29__CLASSD_L1 PINMUX_PIN(PIN_PA29, 6, 1) +#define PIN_PA30 30 +#define PIN_PA30__GPIO PINMUX_PIN(PIN_PA30, 0, 0) +#define PIN_PA30__NWE_NANDWE PINMUX_PIN(PIN_PA30, 2, 1) +#define PIN_PA30__SPI0_NPCS0 PINMUX_PIN(PIN_PA30, 3, 2) +#define PIN_PA30__PWMH0 PINMUX_PIN(PIN_PA30, 4, 1) +#define PIN_PA30__SDMMC1_CD PINMUX_PIN(PIN_PA30, 5, 1) +#define PIN_PA30__CLASSD_L2 PINMUX_PIN(PIN_PA30, 6, 1) +#define PIN_PA31 31 +#define PIN_PA31__GPIO PINMUX_PIN(PIN_PA31, 0, 0) +#define PIN_PA31__NCS3 PINMUX_PIN(PIN_PA31, 2, 1) +#define PIN_PA31__SPI0_MISO PINMUX_PIN(PIN_PA31, 3, 2) +#define PIN_PA31__PWML0 PINMUX_PIN(PIN_PA31, 4, 1) +#define PIN_PA31__CLASSD_L3 PINMUX_PIN(PIN_PA31, 6, 1) +#define PIN_PB0 32 +#define PIN_PB0__GPIO PINMUX_PIN(PIN_PB0, 0, 0) +#define PIN_PB0__A21_NANDALE PINMUX_PIN(PIN_PB0, 2, 1) +#define PIN_PB0__SPI0_MOSI PINMUX_PIN(PIN_PB0, 3, 2) +#define PIN_PB0__PWMH1 PINMUX_PIN(PIN_PB0, 4, 1) +#define PIN_PB1 33 +#define PIN_PB1__GPIO PINMUX_PIN(PIN_PB1, 0, 0) +#define PIN_PB1__A22_NANDCLE PINMUX_PIN(PIN_PB1, 2, 1) +#define PIN_PB1__SPI0_SPCK PINMUX_PIN(PIN_PB1, 3, 2) +#define PIN_PB1__PWML1 PINMUX_PIN(PIN_PB1, 4, 1) +#define PIN_PB1__CLASSD_R0 PINMUX_PIN(PIN_PB1, 6, 1) +#define PIN_PB2 34 +#define PIN_PB2__GPIO PINMUX_PIN(PIN_PB2, 0, 0) +#define PIN_PB2__NRD_NANDOE PINMUX_PIN(PIN_PB2, 2, 1) +#define PIN_PB2__PWMFI0 PINMUX_PIN(PIN_PB2, 4, 1) +#define PIN_PB2__CLASSD_R1 PINMUX_PIN(PIN_PB2, 6, 1) +#define PIN_PB3 35 +#define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) +#define PIN_PB3__URXD4 PINMUX_PIN(PIN_PB3, 1, 1) +#define PIN_PB3__D8 PINMUX_PIN(PIN_PB3, 2, 1) +#define PIN_PB3__IRQ PINMUX_PIN(PIN_PB3, 3, 3) +#define PIN_PB3__PWMEXTRG0 PINMUX_PIN(PIN_PB3, 4, 1) +#define PIN_PB3__CLASSD_R2 PINMUX_PIN(PIN_PB3, 6, 1) +#define PIN_PB4 36 +#define PIN_PB4__GPIO PINMUX_PIN(PIN_PB4, 0, 0) +#define PIN_PB4__UTXD4 PINMUX_PIN(PIN_PB4, 1, 1) +#define PIN_PB4__D9 PINMUX_PIN(PIN_PB4, 2, 1) +#define PIN_PB4__FIQ PINMUX_PIN(PIN_PB4, 3, 4) +#define PIN_PB4__CLASSD_R3 PINMUX_PIN(PIN_PB4, 6, 1) +#define PIN_PB5 37 +#define PIN_PB5__GPIO PINMUX_PIN(PIN_PB5, 0, 0) +#define PIN_PB5__TCLK2 PINMUX_PIN(PIN_PB5, 1, 1) +#define PIN_PB5__D10 PINMUX_PIN(PIN_PB5, 2, 1) +#define PIN_PB5__PWMH2 PINMUX_PIN(PIN_PB5, 3, 1) +#define PIN_PB5__QSPI1_SCK PINMUX_PIN(PIN_PB5, 4, 2) +#define PIN_PB5__GTSUCOMP PINMUX_PIN(PIN_PB5, 6, 3) +#define PIN_PB6 38 +#define PIN_PB6__GPIO PINMUX_PIN(PIN_PB6, 0, 0) +#define PIN_PB6__TIOA2 PINMUX_PIN(PIN_PB6, 1, 1) +#define PIN_PB6__D11 PINMUX_PIN(PIN_PB6, 2, 1) +#define PIN_PB6__PWML2 PINMUX_PIN(PIN_PB6, 3, 1) +#define PIN_PB6__QSPI1_CS PINMUX_PIN(PIN_PB6, 4, 2) +#define PIN_PB6__GTXER PINMUX_PIN(PIN_PB6, 6, 3) +#define PIN_PB7 39 +#define PIN_PB7__GPIO PINMUX_PIN(PIN_PB7, 0, 0) +#define PIN_PB7__TIOB2 PINMUX_PIN(PIN_PB7, 1, 1) +#define PIN_PB7__D12 PINMUX_PIN(PIN_PB7, 2, 1) +#define PIN_PB7__PWMH3 PINMUX_PIN(PIN_PB7, 3, 1) +#define PIN_PB7__QSPI1_IO0 PINMUX_PIN(PIN_PB7, 4, 2) +#define PIN_PB7__GRXCK PINMUX_PIN(PIN_PB7, 6, 3) +#define PIN_PB8 40 +#define PIN_PB8__GPIO PINMUX_PIN(PIN_PB8, 0, 0) +#define PIN_PB8__TCLK3 PINMUX_PIN(PIN_PB8, 1, 1) +#define PIN_PB8__D13 PINMUX_PIN(PIN_PB8, 2, 1) +#define PIN_PB8__PWML3 PINMUX_PIN(PIN_PB8, 3, 1) +#define PIN_PB8__QSPI1_IO1 PINMUX_PIN(PIN_PB8, 4, 2) +#define PIN_PB8__GCRS PINMUX_PIN(PIN_PB8, 6, 3) +#define PIN_PB9 41 +#define PIN_PB9__GPIO PINMUX_PIN(PIN_PB9, 0, 0) +#define PIN_PB9__TIOA3 PINMUX_PIN(PIN_PB9, 1, 1) +#define PIN_PB9__D14 PINMUX_PIN(PIN_PB9, 2, 1) +#define PIN_PB9__PWMFI1 PINMUX_PIN(PIN_PB9, 3, 1) +#define PIN_PB9__QSPI1_IO2 PINMUX_PIN(PIN_PB9, 4, 2) +#define PIN_PB9__GCOL PINMUX_PIN(PIN_PB9, 6, 3) +#define PIN_PB10 42 +#define PIN_PB10__GPIO PINMUX_PIN(PIN_PB10, 0, 0) +#define PIN_PB10__TIOB3 PINMUX_PIN(PIN_PB10, 1, 1) +#define PIN_PB10__D15 PINMUX_PIN(PIN_PB10, 2, 1) +#define PIN_PB10__PWMEXTRG1 PINMUX_PIN(PIN_PB10, 3, 1) +#define PIN_PB10__QSPI1_IO3 PINMUX_PIN(PIN_PB10, 4, 2) +#define PIN_PB10__GRX2 PINMUX_PIN(PIN_PB10, 6, 3) +#define PIN_PB11 43 +#define PIN_PB11__GPIO PINMUX_PIN(PIN_PB11, 0, 0) +#define PIN_PB11__LCDDAT0 PINMUX_PIN(PIN_PB11, 1, 1) +#define PIN_PB11__A0_NBS0 PINMUX_PIN(PIN_PB11, 2, 1) +#define PIN_PB11__URXD3 PINMUX_PIN(PIN_PB11, 3, 3) +#define PIN_PB11__PDMIC_DAT PINMUX_PIN(PIN_PB11, 4, 2) +#define PIN_PB11__GRX3 PINMUX_PIN(PIN_PB11, 6, 3) +#define PIN_PB12 44 +#define PIN_PB12__GPIO PINMUX_PIN(PIN_PB12, 0, 0) +#define PIN_PB12__LCDDAT1 PINMUX_PIN(PIN_PB12, 1, 1) +#define PIN_PB12__A1 PINMUX_PIN(PIN_PB12, 2, 1) +#define PIN_PB12__UTXD3 PINMUX_PIN(PIN_PB12, 3, 3) +#define PIN_PB12__PDMIC_CLK PINMUX_PIN(PIN_PB12, 4, 2) +#define PIN_PB12__GTX2 PINMUX_PIN(PIN_PB12, 6, 3) +#define PIN_PB13 45 +#define PIN_PB13__GPIO PINMUX_PIN(PIN_PB13, 0, 0) +#define PIN_PB13__LCDDAT2 PINMUX_PIN(PIN_PB13, 1, 1) +#define PIN_PB13__A2 PINMUX_PIN(PIN_PB13, 2, 1) +#define PIN_PB13__PCK1 PINMUX_PIN(PIN_PB13, 3, 3) +#define PIN_PB13__GTX3 PINMUX_PIN(PIN_PB13, 6, 3) +#define PIN_PB14 46 +#define PIN_PB14__GPIO PINMUX_PIN(PIN_PB14, 0, 0) +#define PIN_PB14__LCDDAT3 PINMUX_PIN(PIN_PB14, 1, 1) +#define PIN_PB14__A3 PINMUX_PIN(PIN_PB14, 2, 1) +#define PIN_PB14__TK1 PINMUX_PIN(PIN_PB14, 3, 2) +#define PIN_PB14__I2SC1_MCK PINMUX_PIN(PIN_PB14, 4, 1) +#define PIN_PB14__QSPI1_SCK PINMUX_PIN(PIN_PB14, 5, 3) +#define PIN_PB14__GTXCK PINMUX_PIN(PIN_PB14, 6, 3) +#define PIN_PB15 47 +#define PIN_PB15__GPIO PINMUX_PIN(PIN_PB15, 0, 0) +#define PIN_PB15__LCDDAT4 PINMUX_PIN(PIN_PB15, 1, 1) +#define PIN_PB15__A4 PINMUX_PIN(PIN_PB15, 2, 1) +#define PIN_PB15__TF1 PINMUX_PIN(PIN_PB15, 3, 2) +#define PIN_PB15__I2SC1_CK PINMUX_PIN(PIN_PB15, 4, 1) +#define PIN_PB15__QSPI1_CS PINMUX_PIN(PIN_PB15, 5, 3) +#define PIN_PB15__GTXEN PINMUX_PIN(PIN_PB15, 6, 3) +#define PIN_PB16 48 +#define PIN_PB16__GPIO PINMUX_PIN(PIN_PB16, 0, 0) +#define PIN_PB16__LCDDAT5 PINMUX_PIN(PIN_PB16, 1, 1) +#define PIN_PB16__A5 PINMUX_PIN(PIN_PB16, 2, 1) +#define PIN_PB16__TD1 PINMUX_PIN(PIN_PB16, 3, 2) +#define PIN_PB16__I2SC1_WS PINMUX_PIN(PIN_PB16, 4, 1) +#define PIN_PB16__QSPI1_IO0 PINMUX_PIN(PIN_PB16, 5, 3) +#define PIN_PB16__GRXDV PINMUX_PIN(PIN_PB16, 6, 3) +#define PIN_PB17 49 +#define PIN_PB17__GPIO PINMUX_PIN(PIN_PB17, 0, 0) +#define PIN_PB17__LCDDAT6 PINMUX_PIN(PIN_PB17, 1, 1) +#define PIN_PB17__A6 PINMUX_PIN(PIN_PB17, 2, 1) +#define PIN_PB17__RD1 PINMUX_PIN(PIN_PB17, 3, 2) +#define PIN_PB17__I2SC1_DI0 PINMUX_PIN(PIN_PB17, 4, 1) +#define PIN_PB17__QSPI1_IO1 PINMUX_PIN(PIN_PB17, 5, 3) +#define PIN_PB17__GRXER PINMUX_PIN(PIN_PB17, 6, 3) +#define PIN_PB18 50 +#define PIN_PB18__GPIO PINMUX_PIN(PIN_PB18, 0, 0) +#define PIN_PB18__LCDDAT7 PINMUX_PIN(PIN_PB18, 1, 1) +#define PIN_PB18__A7 PINMUX_PIN(PIN_PB18, 2, 1) +#define PIN_PB18__RK1 PINMUX_PIN(PIN_PB18, 3, 2) +#define PIN_PB18__I2SC1_DO0 PINMUX_PIN(PIN_PB18, 4, 1) +#define PIN_PB18__QSPI1_IO2 PINMUX_PIN(PIN_PB18, 5, 3) +#define PIN_PB18__GRX0 PINMUX_PIN(PIN_PB18, 6, 3) +#define PIN_PB19 51 +#define PIN_PB19__GPIO PINMUX_PIN(PIN_PB19, 0, 0) +#define PIN_PB19__LCDDAT8 PINMUX_PIN(PIN_PB19, 1, 1) +#define PIN_PB19__A8 PINMUX_PIN(PIN_PB19, 2, 1) +#define PIN_PB19__RF1 PINMUX_PIN(PIN_PB19, 3, 2) +#define PIN_PB19__TIOA3 PINMUX_PIN(PIN_PB19, 4, 2) +#define PIN_PB19__QSPI1_IO3 PINMUX_PIN(PIN_PB19, 5, 3) +#define PIN_PB19__GRX1 PINMUX_PIN(PIN_PB19, 6, 3) +#define PIN_PB20 52 +#define PIN_PB20__GPIO PINMUX_PIN(PIN_PB20, 0, 0) +#define PIN_PB20__LCDDAT9 PINMUX_PIN(PIN_PB20, 1, 1) +#define PIN_PB20__A9 PINMUX_PIN(PIN_PB20, 2, 1) +#define PIN_PB20__TK0 PINMUX_PIN(PIN_PB20, 3, 1) +#define PIN_PB20__TIOB3 PINMUX_PIN(PIN_PB20, 4, 2) +#define PIN_PB20__PCK1 PINMUX_PIN(PIN_PB20, 5, 4) +#define PIN_PB20__GTX0 PINMUX_PIN(PIN_PB20, 6, 3) +#define PIN_PB21 53 +#define PIN_PB21__GPIO PINMUX_PIN(PIN_PB21, 0, 0) +#define PIN_PB21__LCDDAT10 PINMUX_PIN(PIN_PB21, 1, 1) +#define PIN_PB21__A10 PINMUX_PIN(PIN_PB21, 2, 1) +#define PIN_PB21__TF0 PINMUX_PIN(PIN_PB21, 3, 1) +#define PIN_PB21__TCLK3 PINMUX_PIN(PIN_PB21, 4, 2) +#define PIN_PB21__FLEXCOM3_IO2 PINMUX_PIN(PIN_PB21, 5, 3) +#define PIN_PB21__GTX1 PINMUX_PIN(PIN_PB21, 6, 3) +#define PIN_PB22 54 +#define PIN_PB22__GPIO PINMUX_PIN(PIN_PB22, 0, 0) +#define PIN_PB22__LCDDAT11 PINMUX_PIN(PIN_PB22, 1, 1) +#define PIN_PB22__A11 PINMUX_PIN(PIN_PB22, 2, 1) +#define PIN_PB22__TDO PINMUX_PIN(PIN_PB22, 3, 1) +#define PIN_PB22__TIOA2 PINMUX_PIN(PIN_PB22, 4, 2) +#define PIN_PB22__FLEXCOM3_IO1 PINMUX_PIN(PIN_PB22, 5, 3) +#define PIN_PB22__GMDC PINMUX_PIN(PIN_PB22, 6, 3) +#define PIN_PB23 55 +#define PIN_PB23__GPIO PINMUX_PIN(PIN_PB23, 0, 0) +#define PIN_PB23__LCDDAT12 PINMUX_PIN(PIN_PB23, 1, 1) +#define PIN_PB23__A12 PINMUX_PIN(PIN_PB23, 2, 1) +#define PIN_PB23__RD0 PINMUX_PIN(PIN_PB23, 3, 1) +#define PIN_PB23__TIOB2 PINMUX_PIN(PIN_PB23, 4, 2) +#define PIN_PB23__FLEXCOM3_IO0 PINMUX_PIN(PIN_PB23, 5, 3) +#define PIN_PB23__GMDIO PINMUX_PIN(PIN_PB23, 6, 3) +#define PIN_PB24 56 +#define PIN_PB24__GPIO PINMUX_PIN(PIN_PB24, 0, 0) +#define PIN_PB24__LCDDAT13 PINMUX_PIN(PIN_PB24, 1, 1) +#define PIN_PB24__A13 PINMUX_PIN(PIN_PB24, 2, 1) +#define PIN_PB24__RK0 PINMUX_PIN(PIN_PB24, 3, 1) +#define PIN_PB24__TCLK2 PINMUX_PIN(PIN_PB24, 4, 2) +#define PIN_PB24__FLEXCOM3_IO3 PINMUX_PIN(PIN_PB24, 5, 3) +#define PIN_PB24__ISC_D10 PINMUX_PIN(PIN_PB24, 6, 3) +#define PIN_PB25 57 +#define PIN_PB25__GPIO PINMUX_PIN(PIN_PB25, 0, 0) +#define PIN_PB25__LCDDAT14 PINMUX_PIN(PIN_PB25, 1, 1) +#define PIN_PB25__A14 PINMUX_PIN(PIN_PB25, 2, 1) +#define PIN_PB25__RF0 PINMUX_PIN(PIN_PB25, 3, 1) +#define PIN_PB25__FLEXCOM3_IO4 PINMUX_PIN(PIN_PB25, 5, 3) +#define PIN_PB25__ISC_D11 PINMUX_PIN(PIN_PB25, 6, 3) +#define PIN_PB26 58 +#define PIN_PB26__GPIO PINMUX_PIN(PIN_PB26, 0, 0) +#define PIN_PB26__LCDDAT15 PINMUX_PIN(PIN_PB26, 1, 1) +#define PIN_PB26__A15 PINMUX_PIN(PIN_PB26, 2, 1) +#define PIN_PB26__URXD0 PINMUX_PIN(PIN_PB26, 3, 1) +#define PIN_PB26__PDMIC_DAT PINMUX_PIN(PIN_PB26, 4, 1) +#define PIN_PB26__ISC_D0 PINMUX_PIN(PIN_PB26, 6, 3) +#define PIN_PB27 59 +#define PIN_PB27__GPIO PINMUX_PIN(PIN_PB27, 0, 0) +#define PIN_PB27__LCDDAT16 PINMUX_PIN(PIN_PB27, 1, 1) +#define PIN_PB27__A16 PINMUX_PIN(PIN_PB27, 2, 1) +#define PIN_PB27__UTXD0 PINMUX_PIN(PIN_PB27, 3, 1) +#define PIN_PB27__PDMIC_CLK PINMUX_PIN(PIN_PB27, 4, 1) +#define PIN_PB27__ISC_D1 PINMUX_PIN(PIN_PB27, 6, 3) +#define PIN_PB28 60 +#define PIN_PB28__GPIO PINMUX_PIN(PIN_PB28, 0, 0) +#define PIN_PB28__LCDDAT17 PINMUX_PIN(PIN_PB28, 1, 1) +#define PIN_PB28__A17 PINMUX_PIN(PIN_PB28, 2, 1) +#define PIN_PB28__FLEXCOM0_IO0 PINMUX_PIN(PIN_PB28, 3, 1) +#define PIN_PB28__TIOA5 PINMUX_PIN(PIN_PB28, 4, 2) +#define PIN_PB28__ISC_D2 PINMUX_PIN(PIN_PB28, 6, 3) +#define PIN_PB29 61 +#define PIN_PB29__GPIO PINMUX_PIN(PIN_PB29, 0, 0) +#define PIN_PB29__LCDDAT18 PINMUX_PIN(PIN_PB29, 1, 1) +#define PIN_PB29__A18 PINMUX_PIN(PIN_PB29, 2, 1) +#define PIN_PB29__FLEXCOM0_IO1 PINMUX_PIN(PIN_PB29, 3, 1) +#define PIN_PB29__TIOB5 PINMUX_PIN(PIN_PB29, 4, 2) +#define PIN_PB29__ISC_D3 PINMUX_PIN(PIN_PB29, 7, 3) +#define PIN_PB30 62 +#define PIN_PB30__GPIO PINMUX_PIN(PIN_PB30, 0, 0) +#define PIN_PB30__LCDDAT19 PINMUX_PIN(PIN_PB30, 1, 1) +#define PIN_PB30__A19 PINMUX_PIN(PIN_PB30, 2, 1) +#define PIN_PB30__FLEXCOM0_IO2 PINMUX_PIN(PIN_PB30, 3, 1) +#define PIN_PB30__TCLK5 PINMUX_PIN(PIN_PB30, 4, 2) +#define PIN_PB30__ISC_D4 PINMUX_PIN(PIN_PB30, 6, 3) +#define PIN_PB31 63 +#define PIN_PB31__GPIO PINMUX_PIN(PIN_PB31, 0, 0) +#define PIN_PB31__LCDDAT20 PINMUX_PIN(PIN_PB31, 1, 1) +#define PIN_PB31__A20 PINMUX_PIN(PIN_PB31, 2, 1) +#define PIN_PB31__FLEXCOM0_IO3 PINMUX_PIN(PIN_PB31, 3, 1) +#define PIN_PB31__TWD0 PINMUX_PIN(PIN_PB31, 4, 1) +#define PIN_PB31__ISC_D5 PINMUX_PIN(PIN_PB31, 6, 3) +#define PIN_PC0 64 +#define PIN_PC0__GPIO PINMUX_PIN(PIN_PC0, 0, 0) +#define PIN_PC0__LCDDAT21 PINMUX_PIN(PIN_PC0, 1, 1) +#define PIN_PC0__A23 PINMUX_PIN(PIN_PC0, 2, 1) +#define PIN_PC0__FLEXCOM0_IO4 PINMUX_PIN(PIN_PC0, 3, 1) +#define PIN_PC0__TWCK0 PINMUX_PIN(PIN_PC0, 4, 1) +#define PIN_PC0__ISC_D6 PINMUX_PIN(PIN_PC0, 6, 3) +#define PIN_PC1 65 +#define PIN_PC1__GPIO PINMUX_PIN(PIN_PC1, 0, 0) +#define PIN_PC1__LCDDAT22 PINMUX_PIN(PIN_PC1, 1, 1) +#define PIN_PC1__A24 PINMUX_PIN(PIN_PC1, 2, 1) +#define PIN_PC1__CANTX0 PINMUX_PIN(PIN_PC1, 3, 1) +#define PIN_PC1__SPI1_SPCK PINMUX_PIN(PIN_PC1, 4, 1) +#define PIN_PC1__I2SC0_CK PINMUX_PIN(PIN_PC1, 5, 1) +#define PIN_PC1__ISC_D7 PINMUX_PIN(PIN_PC1, 6, 3) +#define PIN_PC2 66 +#define PIN_PC2__GPIO PINMUX_PIN(PIN_PC2, 0, 0) +#define PIN_PC2__LCDDAT23 PINMUX_PIN(PIN_PC2, 1, 1) +#define PIN_PC2__A25 PINMUX_PIN(PIN_PC2, 2, 1) +#define PIN_PC2__CANRX0 PINMUX_PIN(PIN_PC2, 3, 1) +#define PIN_PC2__SPI1_MOSI PINMUX_PIN(PIN_PC2, 4, 1) +#define PIN_PC2__I2SC0_MCK PINMUX_PIN(PIN_PC2, 5, 1) +#define PIN_PC2__ISC_D8 PINMUX_PIN(PIN_PC2, 6, 3) +#define PIN_PC3 67 +#define PIN_PC3__GPIO PINMUX_PIN(PIN_PC3, 0, 0) +#define PIN_PC3__LCDPWM PINMUX_PIN(PIN_PC3, 1, 1) +#define PIN_PC3__NWAIT PINMUX_PIN(PIN_PC3, 2, 1) +#define PIN_PC3__TIOA1 PINMUX_PIN(PIN_PC3, 3, 1) +#define PIN_PC3__SPI1_MISO PINMUX_PIN(PIN_PC3, 4, 1) +#define PIN_PC3__I2SC0_WS PINMUX_PIN(PIN_PC3, 5, 1) +#define PIN_PC3__ISC_D9 PINMUX_PIN(PIN_PC3, 6, 3) +#define PIN_PC4 68 +#define PIN_PC4__GPIO PINMUX_PIN(PIN_PC4, 0, 0) +#define PIN_PC4__LCDDISP PINMUX_PIN(PIN_PC4, 1, 1) +#define PIN_PC4__NWR1_NBS1 PINMUX_PIN(PIN_PC4, 2, 1) +#define PIN_PC4__TIOB1 PINMUX_PIN(PIN_PC4, 3, 1) +#define PIN_PC4__SPI1_NPCS0 PINMUX_PIN(PIN_PC4, 4, 1) +#define PIN_PC4__I2SC0_DI0 PINMUX_PIN(PIN_PC4, 5, 1) +#define PIN_PC4__ISC_PCK PINMUX_PIN(PIN_PC4, 6, 3) +#define PIN_PC5 69 +#define PIN_PC5__GPIO PINMUX_PIN(PIN_PC5, 0, 0) +#define PIN_PC5__LCDVSYNC PINMUX_PIN(PIN_PC5, 1, 1) +#define PIN_PC5__NCS0 PINMUX_PIN(PIN_PC5, 2, 1) +#define PIN_PC5__TCLK1 PINMUX_PIN(PIN_PC5, 3, 1) +#define PIN_PC5__SPI1_NPCS1 PINMUX_PIN(PIN_PC5, 4, 1) +#define PIN_PC5__I2SC0_DO0 PINMUX_PIN(PIN_PC5, 5, 1) +#define PIN_PC5__ISC_VSYNC PINMUX_PIN(PIN_PC5, 6, 3) +#define PIN_PC6 70 +#define PIN_PC6__GPIO PINMUX_PIN(PIN_PC6, 0, 0) +#define PIN_PC6__LCDHSYNC PINMUX_PIN(PIN_PC6, 1, 1) +#define PIN_PC6__NCS1 PINMUX_PIN(PIN_PC6, 2, 1) +#define PIN_PC6__TWD1 PINMUX_PIN(PIN_PC6, 3, 1) +#define PIN_PC6__SPI1_NPCS2 PINMUX_PIN(PIN_PC6, 4, 1) +#define PIN_PC6__ISC_HSYNC PINMUX_PIN(PIN_PC6, 6, 3) +#define PIN_PC7 71 +#define PIN_PC7__GPIO PINMUX_PIN(PIN_PC7, 0, 0) +#define PIN_PC7__LCDPCK PINMUX_PIN(PIN_PC7, 1, 1) +#define PIN_PC7__NCS2 PINMUX_PIN(PIN_PC7, 2, 1) +#define PIN_PC7__TWCK1 PINMUX_PIN(PIN_PC7, 3, 1) +#define PIN_PC7__SPI1_NPCS3 PINMUX_PIN(PIN_PC7, 4, 1) +#define PIN_PC7__URXD1 PINMUX_PIN(PIN_PC7, 5, 2) +#define PIN_PC7__ISC_MCK PINMUX_PIN(PIN_PC7, 6, 3) +#define PIN_PC8 72 +#define PIN_PC8__GPIO PINMUX_PIN(PIN_PC8, 0, 0) +#define PIN_PC8__LCDDEN PINMUX_PIN(PIN_PC8, 1, 1) +#define PIN_PC8__NANDRDY PINMUX_PIN(PIN_PC8, 2, 1) +#define PIN_PC8__FIQ PINMUX_PIN(PIN_PC8, 3, 1) +#define PIN_PC8__PCK0 PINMUX_PIN(PIN_PC8, 4, 3) +#define PIN_PC8__UTXD1 PINMUX_PIN(PIN_PC8, 5, 2) +#define PIN_PC8__ISC_FIELD PINMUX_PIN(PIN_PC8, 6, 3) +#define PIN_PC9 73 +#define PIN_PC9__GPIO PINMUX_PIN(PIN_PC9, 0, 0) +#define PIN_PC9__FIQ PINMUX_PIN(PIN_PC9, 1, 3) +#define PIN_PC9__GTSUCOMP PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__ISC_D0 PINMUX_PIN(PIN_PC9, 2, 1) +#define PIN_PC9__TIOA4 PINMUX_PIN(PIN_PC9, 4, 2) +#define PIN_PC10 74 +#define PIN_PC10__GPIO PINMUX_PIN(PIN_PC10, 0, 0) +#define PIN_PC10__LCDDAT2 PINMUX_PIN(PIN_PC10, 1, 2) +#define PIN_PC10__GTXCK PINMUX_PIN(PIN_PC10, 2, 1) +#define PIN_PC10__ISC_D1 PINMUX_PIN(PIN_PC10, 3, 1) +#define PIN_PC10__TIOB4 PINMUX_PIN(PIN_PC10, 4, 2) +#define PIN_PC10__CANTX0 PINMUX_PIN(PIN_PC10, 5, 2) +#define PIN_PC11 75 +#define PIN_PC11__GPIO PINMUX_PIN(PIN_PC11, 0, 0) +#define PIN_PC11__LCDDAT3 PINMUX_PIN(PIN_PC11, 1, 2) +#define PIN_PC11__GTXEN PINMUX_PIN(PIN_PC11, 2, 1) +#define PIN_PC11__ISC_D2 PINMUX_PIN(PIN_PC11, 3, 1) +#define PIN_PC11__TCLK4 PINMUX_PIN(PIN_PC11, 4, 2) +#define PIN_PC11__CANRX0 PINMUX_PIN(PIN_PC11, 5, 2) +#define PIN_PC11__A0_NBS0 PINMUX_PIN(PIN_PC11, 6, 2) +#define PIN_PC12 76 +#define PIN_PC12__GPIO PINMUX_PIN(PIN_PC12, 0, 0) +#define PIN_PC12__LCDDAT4 PINMUX_PIN(PIN_PC12, 1, 2) +#define PIN_PC12__GRXDV PINMUX_PIN(PIN_PC12, 2, 1) +#define PIN_PC12__ISC_D3 PINMUX_PIN(PIN_PC12, 3, 1) +#define PIN_PC12__URXD3 PINMUX_PIN(PIN_PC12, 4, 1) +#define PIN_PC12__TK0 PINMUX_PIN(PIN_PC12, 5, 2) +#define PIN_PC12__A1 PINMUX_PIN(PIN_PC12, 6, 2) +#define PIN_PC13 77 +#define PIN_PC13__GPIO PINMUX_PIN(PIN_PC13, 0, 0) +#define PIN_PC13__LCDDAT5 PINMUX_PIN(PIN_PC13, 1, 2) +#define PIN_PC13__GRXER PINMUX_PIN(PIN_PC13, 2, 1) +#define PIN_PC13__ISC_D4 PINMUX_PIN(PIN_PC13, 3, 1) +#define PIN_PC13__UTXD3 PINMUX_PIN(PIN_PC13, 4, 1) +#define PIN_PC13__TF0 PINMUX_PIN(PIN_PC13, 5, 2) +#define PIN_PC13__A2 PINMUX_PIN(PIN_PC13, 6, 2) +#define PIN_PC14 78 +#define PIN_PC14__GPIO PINMUX_PIN(PIN_PC14, 0, 0) +#define PIN_PC14__LCDDAT6 PINMUX_PIN(PIN_PC14, 1, 2) +#define PIN_PC14__GRX0 PINMUX_PIN(PIN_PC14, 2, 1) +#define PIN_PC14__ISC_D5 PINMUX_PIN(PIN_PC14, 3, 1) +#define PIN_PC14__TDO PINMUX_PIN(PIN_PC14, 5, 2) +#define PIN_PC14__A3 PINMUX_PIN(PIN_PC14, 6, 2) +#define PIN_PC15 79 +#define PIN_PC15__GPIO PINMUX_PIN(PIN_PC15, 0, 0) +#define PIN_PC15__LCDDAT7 PINMUX_PIN(PIN_PC15, 1, 2) +#define PIN_PC15__GRX1 PINMUX_PIN(PIN_PC15, 2, 1) +#define PIN_PC15__ISC_D6 PINMUX_PIN(PIN_PC15, 3, 1) +#define PIN_PC15__RD0 PINMUX_PIN(PIN_PC15, 5, 2) +#define PIN_PC15__A4 PINMUX_PIN(PIN_PC15, 6, 2) +#define PIN_PC16 80 +#define PIN_PC16__GPIO PINMUX_PIN(PIN_PC16, 0, 0) +#define PIN_PC16__LCDDAT10 PINMUX_PIN(PIN_PC16, 1, 2) +#define PIN_PC16__GTX0 PINMUX_PIN(PIN_PC16, 2, 1) +#define PIN_PC16__ISC_D7 PINMUX_PIN(PIN_PC16, 3, 1) +#define PIN_PC16__RK0 PINMUX_PIN(PIN_PC16, 5, 2) +#define PIN_PC16__A5 PINMUX_PIN(PIN_PC16, 6, 2) +#define PIN_PC17 81 +#define PIN_PC17__GPIO PINMUX_PIN(PIN_PC17, 0, 0) +#define PIN_PC17__LCDDAT11 PINMUX_PIN(PIN_PC17, 1, 2) +#define PIN_PC17__GTX1 PINMUX_PIN(PIN_PC17, 2, 1) +#define PIN_PC17__ISC_D8 PINMUX_PIN(PIN_PC17, 3, 1) +#define PIN_PC17__RF0 PINMUX_PIN(PIN_PC17, 5, 2) +#define PIN_PC17__A6 PINMUX_PIN(PIN_PC17, 6, 2) +#define PIN_PC18 82 +#define PIN_PC18__GPIO PINMUX_PIN(PIN_PC18, 0, 0) +#define PIN_PC18__LCDDAT12 PINMUX_PIN(PIN_PC18, 1, 2) +#define PIN_PC18__GMDC PINMUX_PIN(PIN_PC18, 2, 1) +#define PIN_PC18__ISC_D9 PINMUX_PIN(PIN_PC18, 3, 1) +#define PIN_PC18__FLEXCOM3_IO2 PINMUX_PIN(PIN_PC18, 5, 2) +#define PIN_PC18__A7 PINMUX_PIN(PIN_PC18, 6, 2) +#define PIN_PC19 83 +#define PIN_PC19__GPIO PINMUX_PIN(PIN_PC19, 0, 0) +#define PIN_PC19__LCDDAT13 PINMUX_PIN(PIN_PC19, 1, 2) +#define PIN_PC19__GMDIO PINMUX_PIN(PIN_PC19, 2, 1) +#define PIN_PC19__ISC_D10 PINMUX_PIN(PIN_PC19, 3, 1) +#define PIN_PC19__FLEXCOM3_IO1 PINMUX_PIN(PIN_PC19, 5, 2) +#define PIN_PC19__A8 PINMUX_PIN(PIN_PC19, 6, 2) +#define PIN_PC20 84 +#define PIN_PC20__GPIO PINMUX_PIN(PIN_PC20, 0, 0) +#define PIN_PC20__LCDDAT14 PINMUX_PIN(PIN_PC20, 1, 2) +#define PIN_PC20__GRXCK PINMUX_PIN(PIN_PC20, 2, 1) +#define PIN_PC20__ISC_D11 PINMUX_PIN(PIN_PC20, 3, 1) +#define PIN_PC20__FLEXCOM3_IO0 PINMUX_PIN(PIN_PC20, 5, 2) +#define PIN_PC20__A9 PINMUX_PIN(PIN_PC20, 6, 2) +#define PIN_PC21 85 +#define PIN_PC21__GPIO PINMUX_PIN(PIN_PC21, 0, 0) +#define PIN_PC21__LCDDAT15 PINMUX_PIN(PIN_PC21, 1, 2) +#define PIN_PC21__GTXER PINMUX_PIN(PIN_PC21, 2, 1) +#define PIN_PC21__ISC_PCK PINMUX_PIN(PIN_PC21, 3, 1) +#define PIN_PC21__FLEXCOM3_IO3 PINMUX_PIN(PIN_PC21, 5, 2) +#define PIN_PC21__A10 PINMUX_PIN(PIN_PC21, 6, 2) +#define PIN_PC22 86 +#define PIN_PC22__GPIO PINMUX_PIN(PIN_PC22, 0, 0) +#define PIN_PC22__LCDDAT18 PINMUX_PIN(PIN_PC22, 1, 2) +#define PIN_PC22__GCRS PINMUX_PIN(PIN_PC22, 2, 1) +#define PIN_PC22__ISC_VSYNC PINMUX_PIN(PIN_PC22, 3, 1) +#define PIN_PC22__FLEXCOM3_IO4 PINMUX_PIN(PIN_PC22, 5, 2) +#define PIN_PC22__A11 PINMUX_PIN(PIN_PC22, 6, 2) +#define PIN_PC23 87 +#define PIN_PC23__GPIO PINMUX_PIN(PIN_PC23, 0, 0) +#define PIN_PC23__LCDDAT19 PINMUX_PIN(PIN_PC23, 1, 2) +#define PIN_PC23__GCOL PINMUX_PIN(PIN_PC23, 2, 1) +#define PIN_PC23__ISC_HSYNC PINMUX_PIN(PIN_PC23, 3, 1) +#define PIN_PC23__A12 PINMUX_PIN(PIN_PC23, 6, 2) +#define PIN_PC24 88 +#define PIN_PC24__GPIO PINMUX_PIN(PIN_PC24, 0, 0) +#define PIN_PC24__LCDDAT20 PINMUX_PIN(PIN_PC24, 1, 2) +#define PIN_PC24__GRX2 PINMUX_PIN(PIN_PC24, 2, 1) +#define PIN_PC24__ISC_MCK PINMUX_PIN(PIN_PC24, 3, 1) +#define PIN_PC24__A13 PINMUX_PIN(PIN_PC24, 6, 2) +#define PIN_PC25 89 +#define PIN_PC25__GPIO PINMUX_PIN(PIN_PC25, 0, 0) +#define PIN_PC25__LCDDAT21 PINMUX_PIN(PIN_PC25, 1, 2) +#define PIN_PC25__GRX3 PINMUX_PIN(PIN_PC25, 2, 1) +#define PIN_PC25__ISC_FIELD PINMUX_PIN(PIN_PC25, 3, 1) +#define PIN_PC25__A14 PINMUX_PIN(PIN_PC25, 6, 2) +#define PIN_PC26 90 +#define PIN_PC26__GPIO PINMUX_PIN(PIN_PC26, 0, 0) +#define PIN_PC26__LCDDAT22 PINMUX_PIN(PIN_PC26, 1, 2) +#define PIN_PC26__GTX2 PINMUX_PIN(PIN_PC26, 2, 1) +#define PIN_PC26__CANTX1 PINMUX_PIN(PIN_PC26, 4, 1) +#define PIN_PC26__A15 PINMUX_PIN(PIN_PC26, 6, 2) +#define PIN_PC27 91 +#define PIN_PC27__GPIO PINMUX_PIN(PIN_PC27, 0, 0) +#define PIN_PC27__LCDDAT23 PINMUX_PIN(PIN_PC27, 1, 2) +#define PIN_PC27__GTX3 PINMUX_PIN(PIN_PC27, 2, 1) +#define PIN_PC27__PCK1 PINMUX_PIN(PIN_PC27, 3, 2) +#define PIN_PC27__CANRX1 PINMUX_PIN(PIN_PC27, 4, 1) +#define PIN_PC27__TWD0 PINMUX_PIN(PIN_PC27, 5, 2) +#define PIN_PC27__A16 PINMUX_PIN(PIN_PC27, 6, 2) +#define PIN_PC28 92 +#define PIN_PC28__GPIO PINMUX_PIN(PIN_PC28, 0, 0) +#define PIN_PC28__LCDPWM PINMUX_PIN(PIN_PC28, 1, 2) +#define PIN_PC28__FLEXCOM4_IO0 PINMUX_PIN(PIN_PC28, 2, 1) +#define PIN_PC28__PCK2 PINMUX_PIN(PIN_PC28, 3, 2) +#define PIN_PC28__TWCK0 PINMUX_PIN(PIN_PC28, 5, 2) +#define PIN_PC28__A17 PINMUX_PIN(PIN_PC28, 6, 2) +#define PIN_PC29 93 +#define PIN_PC29__GPIO PINMUX_PIN(PIN_PC29, 0, 0) +#define PIN_PC29__LCDDISP PINMUX_PIN(PIN_PC29, 1, 2) +#define PIN_PC29__FLEXCOM4_IO1 PINMUX_PIN(PIN_PC29, 2, 1) +#define PIN_PC29__A18 PINMUX_PIN(PIN_PC29, 6, 2) +#define PIN_PC30 94 +#define PIN_PC30__GPIO PINMUX_PIN(PIN_PC30, 0, 0) +#define PIN_PC30__LCDVSYNC PINMUX_PIN(PIN_PC30, 1, 2) +#define PIN_PC30__FLEXCOM4_IO2 PINMUX_PIN(PIN_PC30, 2, 1) +#define PIN_PC30__A19 PINMUX_PIN(PIN_PC30, 6, 2) +#define PIN_PC31 95 +#define PIN_PC31__GPIO PINMUX_PIN(PIN_PC31, 0, 0) +#define PIN_PC31__LCDHSYNC PINMUX_PIN(PIN_PC31, 1, 2) +#define PIN_PC31__FLEXCOM4_IO3 PINMUX_PIN(PIN_PC31, 2, 1) +#define PIN_PC31__URXD3 PINMUX_PIN(PIN_PC31, 3, 2) +#define PIN_PC31__A20 PINMUX_PIN(PIN_PC31, 6, 2) +#define PIN_PD0 96 +#define PIN_PD0__GPIO PINMUX_PIN(PIN_PD0, 0, 0) +#define PIN_PD0__LCDPCK PINMUX_PIN(PIN_PD0, 1, 2) +#define PIN_PD0__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD0, 2, 1) +#define PIN_PD0__UTXD3 PINMUX_PIN(PIN_PD0, 3, 2) +#define PIN_PD0__GTSUCOMP PINMUX_PIN(PIN_PD0, 4, 2) +#define PIN_PD0__A23 PINMUX_PIN(PIN_PD0, 6, 2) +#define PIN_PD1 97 +#define PIN_PD1__GPIO PINMUX_PIN(PIN_PD1, 0, 0) +#define PIN_PD1__LCDDEN PINMUX_PIN(PIN_PD1, 1, 2) +#define PIN_PD1__GRXCK PINMUX_PIN(PIN_PD1, 4, 2) +#define PIN_PD1__A24 PINMUX_PIN(PIN_PD1, 6, 2) +#define PIN_PD2 98 +#define PIN_PD2__GPIO PINMUX_PIN(PIN_PD2, 0, 0) +#define PIN_PD2__URXD1 PINMUX_PIN(PIN_PD2, 1, 1) +#define PIN_PD2__GTXER PINMUX_PIN(PIN_PD2, 4, 2) +#define PIN_PD2__ISC_MCK PINMUX_PIN(PIN_PD2, 5, 2) +#define PIN_PD2__A25 PINMUX_PIN(PIN_PD2, 6, 2) +#define PIN_PD3 99 +#define PIN_PD3__GPIO PINMUX_PIN(PIN_PD3, 0, 0) +#define PIN_PD3__UTXD1 PINMUX_PIN(PIN_PD3, 1, 1) +#define PIN_PD3__FIQ PINMUX_PIN(PIN_PD3, 2, 2) +#define PIN_PD3__GCRS PINMUX_PIN(PIN_PD3, 4, 2) +#define PIN_PD3__ISC_D11 PINMUX_PIN(PIN_PD3, 5, 2) +#define PIN_PD3__NWAIT PINMUX_PIN(PIN_PD3, 6, 2) +#define PIN_PD4 100 +#define PIN_PD4__GPIO PINMUX_PIN(PIN_PD4, 0, 0) +#define PIN_PD4__TWD1 PINMUX_PIN(PIN_PD4, 1, 2) +#define PIN_PD4__URXD2 PINMUX_PIN(PIN_PD4, 2, 1) +#define PIN_PD4__GCOL PINMUX_PIN(PIN_PD4, 4, 2) +#define PIN_PD4__ISC_D10 PINMUX_PIN(PIN_PD4, 5, 2) +#define PIN_PD4__NCS0 PINMUX_PIN(PIN_PD4, 6, 2) +#define PIN_PD5 101 +#define PIN_PD5__GPIO PINMUX_PIN(PIN_PD5, 0, 0) +#define PIN_PD5__TWCK1 PINMUX_PIN(PIN_PD5, 1, 2) +#define PIN_PD5__UTXD2 PINMUX_PIN(PIN_PD5, 2, 1) +#define PIN_PD5__GRX2 PINMUX_PIN(PIN_PD5, 4, 2) +#define PIN_PD5__ISC_D9 PINMUX_PIN(PIN_PD5, 5, 2) +#define PIN_PD5__NCS1 PINMUX_PIN(PIN_PD5, 6, 2) +#define PIN_PD6 102 +#define PIN_PD6__GPIO PINMUX_PIN(PIN_PD6, 0, 0) +#define PIN_PD6__TCK PINMUX_PIN(PIN_PD6, 1, 2) +#define PIN_PD6__PCK1 PINMUX_PIN(PIN_PD6, 2, 1) +#define PIN_PD6__GRX3 PINMUX_PIN(PIN_PD6, 4, 2) +#define PIN_PD6__ISC_D8 PINMUX_PIN(PIN_PD6, 5, 2) +#define PIN_PD6__NCS2 PINMUX_PIN(PIN_PD6, 6, 2) +#define PIN_PD7 103 +#define PIN_PD7__GPIO PINMUX_PIN(PIN_PD7, 0, 0) +#define PIN_PD7__TDI PINMUX_PIN(PIN_PD7, 1, 2) +#define PIN_PD7__UTMI_RXVAL PINMUX_PIN(PIN_PD7, 3, 1) +#define PIN_PD7__GTX2 PINMUX_PIN(PIN_PD7, 4, 2) +#define PIN_PD7__ISC_D0 PINMUX_PIN(PIN_PD7, 5, 2) +#define PIN_PD7__NWR1_NBS1 PINMUX_PIN(PIN_PD7, 6, 2) +#define PIN_PD8 104 +#define PIN_PD8__GPIO PINMUX_PIN(PIN_PD8, 0, 0) +#define PIN_PD8__TDO PINMUX_PIN(PIN_PD8, 1, 2) +#define PIN_PD8__UTMI_RXERR PINMUX_PIN(PIN_PD8, 3, 1) +#define PIN_PD8__GTX3 PINMUX_PIN(PIN_PD8, 4, 2) +#define PIN_PD8__ISC_D1 PINMUX_PIN(PIN_PD8, 5, 2) +#define PIN_PD8__NANDRDY PINMUX_PIN(PIN_PD8, 6, 2) +#define PIN_PD9 105 +#define PIN_PD9__GPIO PINMUX_PIN(PIN_PD9, 0, 0) +#define PIN_PD9__TMS PINMUX_PIN(PIN_PD9, 1, 2) +#define PIN_PD9__UTMI_RXACT PINMUX_PIN(PIN_PD9, 3, 1) +#define PIN_PD9__GTXCK PINMUX_PIN(PIN_PD9, 4, 2) +#define PIN_PD9__ISC_D2 PINMUX_PIN(PIN_PD9, 5, 2) +#define PIN_PD10 106 +#define PIN_PD10__GPIO PINMUX_PIN(PIN_PD10, 0, 0) +#define PIN_PD10__NTRST PINMUX_PIN(PIN_PD10, 1, 2) +#define PIN_PD10__UTMI_HDIS PINMUX_PIN(PIN_PD10, 3, 1) +#define PIN_PD10__GTXEN PINMUX_PIN(PIN_PD10, 4, 2) +#define PIN_PD10__ISC_D3 PINMUX_PIN(PIN_PD10, 5, 2) +#define PIN_PD11 107 +#define PIN_PD11__GPIO PINMUX_PIN(PIN_PD11, 0, 0) +#define PIN_PD11__TIOA1 PINMUX_PIN(PIN_PD11, 1, 3) +#define PIN_PD11__PCK2 PINMUX_PIN(PIN_PD11, 2, 2) +#define PIN_PD11__UTMI_LS0 PINMUX_PIN(PIN_PD11, 3, 1) +#define PIN_PD11__GRXDV PINMUX_PIN(PIN_PD11, 4, 2) +#define PIN_PD11__ISC_D4 PINMUX_PIN(PIN_PD11, 5, 2) +#define PIN_PD11__ISC_MCK PINMUX_PIN(PIN_PD11, 7, 4) +#define PIN_PD12 108 +#define PIN_PD12__GPIO PINMUX_PIN(PIN_PD12, 0, 0) +#define PIN_PD12__TIOB1 PINMUX_PIN(PIN_PD12, 1, 3) +#define PIN_PD12__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD12, 2, 2) +#define PIN_PD12__UTMI_LS1 PINMUX_PIN(PIN_PD12, 3, 1) +#define PIN_PD12__GRXER PINMUX_PIN(PIN_PD12, 4, 2) +#define PIN_PD12__ISC_D5 PINMUX_PIN(PIN_PD12, 5, 2) +#define PIN_PD12__ISC_D4 PINMUX_PIN(PIN_PD12, 6, 4) +#define PIN_PD13 109 +#define PIN_PD13__GPIO PINMUX_PIN(PIN_PD13, 0, 0) +#define PIN_PD13__TCLK1 PINMUX_PIN(PIN_PD13, 1, 3) +#define PIN_PD13__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD13, 2, 2) +#define PIN_PD13__UTMI_CDRPCSEL0 PINMUX_PIN(PIN_PD13, 3, 1) +#define PIN_PD13__GRX0 PINMUX_PIN(PIN_PD13, 4, 2) +#define PIN_PD13__ISC_D6 PINMUX_PIN(PIN_PD13, 5, 2) +#define PIN_PD13__ISC_D5 PINMUX_PIN(PIN_PD13, 6, 4) +#define PIN_PD14 110 +#define PIN_PD14__GPIO PINMUX_PIN(PIN_PD14, 0, 0) +#define PIN_PD14__TCK PINMUX_PIN(PIN_PD14, 1, 1) +#define PIN_PD14__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD14, 2, 2) +#define PIN_PD14__UTMI_CDRPCSEL1 PINMUX_PIN(PIN_PD14, 3, 1) +#define PIN_PD14__GRX1 PINMUX_PIN(PIN_PD14, 4, 2) +#define PIN_PD14__ISC_D7 PINMUX_PIN(PIN_PD14, 5, 2) +#define PIN_PD14__ISC_D6 PINMUX_PIN(PIN_PD14, 6, 4) +#define PIN_PD15 111 +#define PIN_PD15__GPIO PINMUX_PIN(PIN_PD15, 0, 0) +#define PIN_PD15__TDI PINMUX_PIN(PIN_PD15, 1, 1) +#define PIN_PD15__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD15, 2, 2) +#define PIN_PD15__UTMI_CDRCPDIVEN PINMUX_PIN(PIN_PD15, 3, 1) +#define PIN_PD15__GTX0 PINMUX_PIN(PIN_PD15, 4, 2) +#define PIN_PD15__ISC_PCK PINMUX_PIN(PIN_PD15, 5, 2) +#define PIN_PD15__ISC_D7 PINMUX_PIN(PIN_PD15, 6, 4) +#define PIN_PD16 112 +#define PIN_PD16__GPIO PINMUX_PIN(PIN_PD16, 0, 0) +#define PIN_PD16__TDO PINMUX_PIN(PIN_PD16, 1, 1) +#define PIN_PD16__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD16, 2, 2) +#define PIN_PD16__UTMI_CDRBISTEN PINMUX_PIN(PIN_PD16, 3, 1) +#define PIN_PD16__GTX1 PINMUX_PIN(PIN_PD16, 4, 2) +#define PIN_PD16__ISC_VSYNC PINMUX_PIN(PIN_PD16, 5, 2) +#define PIN_PD16__ISC_D8 PINMUX_PIN(PIN_PD16, 6, 4) +#define PIN_PD17 113 +#define PIN_PD17__GPIO PINMUX_PIN(PIN_PD17, 0, 0) +#define PIN_PD17__TMS PINMUX_PIN(PIN_PD17, 1, 1) +#define PIN_PD17__UTMI_CDRCPSELDIV PINMUX_PIN(PIN_PD17, 3, 1) +#define PIN_PD17__GMDC PINMUX_PIN(PIN_PD17, 4, 2) +#define PIN_PD17__ISC_HSYNC PINMUX_PIN(PIN_PD17, 5, 2) +#define PIN_PD17__ISC_D9 PINMUX_PIN(PIN_PD17, 6, 4) +#define PIN_PD18 114 +#define PIN_PD18__GPIO PINMUX_PIN(PIN_PD18, 0, 0) +#define PIN_PD18__NTRST PINMUX_PIN(PIN_PD18, 1, 1) +#define PIN_PD18__GMDIO PINMUX_PIN(PIN_PD18, 4, 2) +#define PIN_PD18__ISC_FIELD PINMUX_PIN(PIN_PD18, 5, 2) +#define PIN_PD18__ISC_D10 PINMUX_PIN(PIN_PD18, 6, 4) +#define PIN_PD19 115 +#define PIN_PD19__GPIO PINMUX_PIN(PIN_PD19, 0, 0) +#define PIN_PD19__PCK0 PINMUX_PIN(PIN_PD19, 1, 1) +#define PIN_PD19__TWD1 PINMUX_PIN(PIN_PD19, 2, 3) +#define PIN_PD19__URXD2 PINMUX_PIN(PIN_PD19, 3, 3) +#define PIN_PD19__I2SC0_CK PINMUX_PIN(PIN_PD19, 5, 2) +#define PIN_PD19__ISC_D11 PINMUX_PIN(PIN_PD19, 6, 4) +#define PIN_PD20 116 +#define PIN_PD20__GPIO PINMUX_PIN(PIN_PD20, 0, 0) +#define PIN_PD20__TIOA2 PINMUX_PIN(PIN_PD20, 1, 3) +#define PIN_PD20__TWCK1 PINMUX_PIN(PIN_PD20, 2, 3) +#define PIN_PD20__UTXD2 PINMUX_PIN(PIN_PD20, 3, 3) +#define PIN_PD20__I2SC0_MCK PINMUX_PIN(PIN_PD20, 5, 2) +#define PIN_PD20__ISC_PCK PINMUX_PIN(PIN_PD20, 6, 4) +#define PIN_PD21 117 +#define PIN_PD21__GPIO PINMUX_PIN(PIN_PD21, 0, 0) +#define PIN_PD21__TIOB2 PINMUX_PIN(PIN_PD21, 1, 3) +#define PIN_PD21__TWD0 PINMUX_PIN(PIN_PD21, 2, 4) +#define PIN_PD21__FLEXCOM4_IO0 PINMUX_PIN(PIN_PD21, 3, 3) +#define PIN_PD21__I2SC0_WS PINMUX_PIN(PIN_PD21, 5, 2) +#define PIN_PD21__ISC_VSYNC PINMUX_PIN(PIN_PD21, 6, 4) +#define PIN_PD22 118 +#define PIN_PD22__GPIO PINMUX_PIN(PIN_PD22, 0, 0) +#define PIN_PD22__TCLK2 PINMUX_PIN(PIN_PD22, 1, 3) +#define PIN_PD22__TWCK0 PINMUX_PIN(PIN_PD22, 2, 4) +#define PIN_PD22__FLEXCOM4_IO1 PINMUX_PIN(PIN_PD22, 3, 3) +#define PIN_PD22__I2SC0_DI0 PINMUX_PIN(PIN_PD22, 5, 2) +#define PIN_PD22__ISC_HSYNC PINMUX_PIN(PIN_PD22, 6, 4) +#define PIN_PD23 119 +#define PIN_PD23__GPIO PINMUX_PIN(PIN_PD23, 0, 0) +#define PIN_PD23__URXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD23__FLEXCOM4_IO2 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD23__I2SC0_DO0 PINMUX_PIN(PIN_PD23, 5, 2) +#define PIN_PD23__ISC_FIELD PINMUX_PIN(PIN_PD23, 6, 4) +#define PIN_PD24 120 +#define PIN_PD24__GPIO PINMUX_PIN(PIN_PD24, 0, 0) +#define PIN_PD24__UTXD2 PINMUX_PIN(PIN_PD23, 1, 2) +#define PIN_PD24__FLEXCOM4_IO3 PINMUX_PIN(PIN_PD23, 3, 3) +#define PIN_PD25 121 +#define PIN_PD25__GPIO PINMUX_PIN(PIN_PD25, 0, 0) +#define PIN_PD25__SPI1_SPCK PINMUX_PIN(PIN_PD25, 1, 3) +#define PIN_PD25__FLEXCOM4_IO4 PINMUX_PIN(PIN_PD25, 3, 3) +#define PIN_PD26 122 +#define PIN_PD26__GPIO PINMUX_PIN(PIN_PD26, 0, 0) +#define PIN_PD26__SPI1_MOSI PINMUX_PIN(PIN_PD26, 1, 3) +#define PIN_PD26__FLEXCOM2_IO0 PINMUX_PIN(PIN_PD26, 3, 2) +#define PIN_PD27 123 +#define PIN_PD27__GPIO PINMUX_PIN(PIN_PD27, 0, 0) +#define PIN_PD27__SPI1_MISO PINMUX_PIN(PIN_PD27, 1, 3) +#define PIN_PD27__TCK PINMUX_PIN(PIN_PD27, 2, 3) +#define PIN_PD27__FLEXCOM2_IO1 PINMUX_PIN(PIN_PD27, 3, 2) +#define PIN_PD28 124 +#define PIN_PD28__GPIO PINMUX_PIN(PIN_PD28, 0, 0) +#define PIN_PD28__SPI1_NPCS0 PINMUX_PIN(PIN_PD28, 1, 3) +#define PIN_PD28__TCI PINMUX_PIN(PIN_PD28, 2, 3) +#define PIN_PD28__FLEXCOM2_IO2 PINMUX_PIN(PIN_PD28, 3, 2) +#define PIN_PD29 125 +#define PIN_PD29__GPIO PINMUX_PIN(PIN_PD29, 0, 0) +#define PIN_PD29__SPI1_NPCS1 PINMUX_PIN(PIN_PD29, 1, 3) +#define PIN_PD29__TDO PINMUX_PIN(PIN_PD29, 2, 3) +#define PIN_PD29__FLEXCOM2_IO3 PINMUX_PIN(PIN_PD29, 3, 2) +#define PIN_PD29__TIOA3 PINMUX_PIN(PIN_PD29, 4, 3) +#define PIN_PD29__TWD0 PINMUX_PIN(PIN_PD29, 5, 3) +#define PIN_PD30 126 +#define PIN_PD30__GPIO PINMUX_PIN(PIN_PD30, 0, 0) +#define PIN_PD30__SPI1_NPCS2 PINMUX_PIN(PIN_PD30, 1, 3) +#define PIN_PD30__TMS PINMUX_PIN(PIN_PD30, 2, 3) +#define PIN_PD30__FLEXCOM2_IO4 PINMUX_PIN(PIN_PD30, 3, 2) +#define PIN_PD30__TIOB3 PINMUX_PIN(PIN_PD30, 4, 3) +#define PIN_PD30__TWCK0 PINMUX_PIN(PIN_PD30, 5, 3) +#define PIN_PD31 127 +#define PIN_PD31__GPIO PINMUX_PIN(PIN_PD31, 0, 0) +#define PIN_PD31__ADTRG PINMUX_PIN(PIN_PD31, 1, 1) +#define PIN_PD31__NTRST PINMUX_PIN(PIN_PD31, 2, 3) +#define PIN_PD31__IRQ PINMUX_PIN(PIN_PD31, 3, 4) +#define PIN_PD31__TCLK3 PINMUX_PIN(PIN_PD31, 4, 3) +#define PIN_PD31__PCK0 PINMUX_PIN(PIN_PD31, 5, 2) -- cgit v1.2.3-70-g09d2 From a9b672a636a599cc052afcb6837e3177dc53c143 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Wed, 16 Sep 2015 17:37:03 +0200 Subject: ARM: at91/dt: sama5d2 Xplained: add device pin muxing Add device pin muxing for the sama5d2 Xplained board. Signed-off-by: Ludovic Desroches Acked-by: Linus Walleij Signed-off-by: Nicolas Ferre --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 61 +++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index e8d63afdb135..dc2397901c1b 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -44,6 +44,7 @@ */ /dts-v1/; #include "sama5d2.dtsi" +#include "sama5d2-pinfunc.h" / { model = "Atmel SAMA5D2 Xplained"; @@ -92,6 +93,8 @@ apb { spi0: spi@f8000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0_default>; status = "okay"; m25p80@0 { @@ -102,25 +105,35 @@ }; macb0: ethernet@f8008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb0_default>; phy-mode = "rmii"; status = "okay"; }; uart1: serial@f8020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; status = "okay"; }; i2c0: i2c@f8028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; status = "okay"; }; uart3: serial@fc008000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_default>; status = "okay"; }; i2c1: i2c@fc028000 { dmas = <0>, <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; status = "okay"; at24@54 { @@ -129,6 +142,54 @@ pagesize = <16>; }; }; + + pinctrl@fc038000 { + pinctrl_i2c0_default: i2c0_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_i2c1_default: i2c1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_macb0_default: macb0_default { + pinmux = , + , + , + , + , + , + , + , + , + ; + bias-disable; + }; + + pinctrl_spi0_default: spi0_default { + pinmux = , + , + , + ; + bias-disable; + }; + + pinctrl_uart1_default: uart1_default { + pinmux = , + ; + bias-disable; + }; + + pinctrl_uart3_default: uart3_default { + pinmux = , + ; + bias-disable; + }; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From eef228e3191de0b62ef5913be216f25ba6b23a4c Mon Sep 17 00:00:00 2001 From: Ray Jui Date: Thu, 24 Sep 2015 15:21:23 -0700 Subject: ARM: dts: move aliases back to .dts in Cygnus Move aliases from bcm-cygnus.dtsi back to individual .dts files. Also clean up the chosen node to have the stdout-path using the proper alias Signed-off-by: Ray Jui Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 ---- arch/arm/boot/dts/bcm911360k.dts | 7 +++++-- arch/arm/boot/dts/bcm958300k.dts | 7 +++++-- arch/arm/boot/dts/bcm958305k.dts | 7 +++++-- 4 files changed, 15 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi index b5f9f34183fe..2778533502d9 100644 --- a/arch/arm/boot/dts/bcm-cygnus.dtsi +++ b/arch/arm/boot/dts/bcm-cygnus.dtsi @@ -41,10 +41,6 @@ model = "Broadcom Cygnus SoC"; interrupt-parent = <&gic>; - aliases { - serial0 = &uart3; - }; - cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/bcm911360k.dts b/arch/arm/boot/dts/bcm911360k.dts index 814011c331d0..091c73a46e08 100644 --- a/arch/arm/boot/dts/bcm911360k.dts +++ b/arch/arm/boot/dts/bcm911360k.dts @@ -38,9 +38,12 @@ model = "Cygnus SVK (BCM911360K)"; compatible = "brcm,bcm11360", "brcm,cygnus"; + aliases { + serial0 = &uart3; + }; + chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/bcm958300k.dts b/arch/arm/boot/dts/bcm958300k.dts index 2e31581dc25e..b4a1392bd5a6 100644 --- a/arch/arm/boot/dts/bcm958300k.dts +++ b/arch/arm/boot/dts/bcm958300k.dts @@ -39,9 +39,12 @@ model = "Cygnus SVK (BCM958300K)"; compatible = "brcm,bcm58300", "brcm,cygnus"; + aliases { + serial0 = &uart3; + }; + chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; diff --git a/arch/arm/boot/dts/bcm958305k.dts b/arch/arm/boot/dts/bcm958305k.dts index 288a637abf3b..3378683321d3 100644 --- a/arch/arm/boot/dts/bcm958305k.dts +++ b/arch/arm/boot/dts/bcm958305k.dts @@ -39,9 +39,12 @@ model = "Cygnus Wireless Audio (BCM958305K)"; compatible = "brcm,bcm58305", "brcm,cygnus"; + aliases { + serial0 = &uart3; + }; + chosen { - stdout-path = &uart3; - bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; }; }; -- cgit v1.2.3-70-g09d2 From 465274d73c7b17578cf1f2444c50086bb2697c2c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Aug 2015 17:22:35 +0200 Subject: ARM: dts: sun6i: Columbus: Add i2c controller for communicating with the LCD The Colombus development kit uses an optional 2048x1536 edp panel using an anx9804 parallel lcd to edp converter. The anx9804 chip is controlled via an i2c bus which is connected to 2 regular gpio pins. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 0cf9926d1e93..8843420a4cba 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -60,6 +60,16 @@ chosen { stdout-path = "serial0:115200n8"; }; + + i2c_lcd: i2c@0 { + /* The lcd panel i2c interface is hooked up via gpios */ + compatible = "i2c-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_lcd_pins>; + gpios = <&pio 0 23 GPIO_ACTIVE_HIGH>, /* PA23, sda */ + <&pio 0 24 GPIO_ACTIVE_HIGH>; /* PA24, scl */ + i2c-gpio,delay-us = <5>; + }; }; &ehci1 { @@ -112,6 +122,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + i2c_lcd_pins: i2c_lcd_pin@0 { + allwinner,pins = "PA23", "PA24"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_usb2_vbus { -- cgit v1.2.3-70-g09d2 From af283532415f756900807c2b5ca0312c01e57cde Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Aug 2015 16:44:32 +0200 Subject: ARM: dts: sun5i: Add simplefb node for tvencoder output Add a simplefb node for tvencoder / composite-video output, such as found on the Auxtek-T003 and the CHIP. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index a513b416a807..7dd016fab318 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -77,6 +77,15 @@ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>; status = "disabled"; }; + + framebuffer@2 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; }; clocks { -- cgit v1.2.3-70-g09d2 From 770df8c87eda3185cd16fbf11638145e098d545e Mon Sep 17 00:00:00 2001 From: Jelle van der Waa Date: Fri, 14 Aug 2015 16:44:34 +0200 Subject: ARM: dts: sun7i: Add regulator configuration to the pcduino3 dts file Add regulator configuration to the pcduino3 dts file. Signed-off-by: Jelle van der Waa Signed-off-by: Hans de Goede [Maxime: Removed usb_power_supply node that isn't defined in the DTSI] Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 35 ++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index afc9ecebed21..ad8169dc54d4 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -111,6 +111,10 @@ allwinner,pins = "PH2"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -137,16 +141,14 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &ir0 { pinctrl-names = "default"; pinctrl-0 = <&ir0_rx_pins_a>; @@ -192,6 +194,31 @@ status = "okay"; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 2f40620aedab9c2de1c3be76ce3af6cea6903bd6 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 14 Aug 2015 16:44:37 +0200 Subject: ARM: dts: sun8i: Add support for qt90h-v4 tablets The gt90h is a pcb found in generic 9" tablets with an A23 soc, 1G RAM and 8G nand, rtl8723as usb wifi, 1 micro usb port and 1 micro sd slot. This commit adds a dts for v4 of the gt90h pcb. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts | 145 +++++++++++++++++++++++++++++++ 2 files changed, 146 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index bb8fa023d574..1920876d6eb9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -622,6 +622,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-wexler-tab7200.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ + sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ sun8i-a33-et-q8-v1.6.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts new file mode 100644 index 000000000000..1aeb06c649b9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-gt90h-v4.dts @@ -0,0 +1,145 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Allwinner GT90H Quad Core Tablet (v4)"; + compatible = "allwinner,gt90h-v4", "allwinner,sun8i-a33"; + + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; + + button@600 { + label = "Back"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_gt90h>; + /* FIXME this really is aldo1, correct once we've pmic support */ + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_gt90h: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 87cf56ec311f31822a6507beaeb837f96a0607aa Mon Sep 17 00:00:00 2001 From: Jelle van der Waa Date: Fri, 14 Aug 2015 16:44:35 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on pcDuino 3 Enable the otg/drc usb controller on the pcDuino 3. Note this board has the otg-vbus connected directly to the 5v-dcc of the board, so there is no vbus0 regulator, nor vbus0-det. Signed-off-by: Jelle van der Waa Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index ad8169dc54d4..861a4a66fb19 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -173,6 +173,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino3: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -187,6 +191,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_ahci_5v { @@ -233,7 +244,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From b8962f7ee700580a148e05eceb2302bcfc59ffbc Mon Sep 17 00:00:00 2001 From: Ralph Benadski Date: Fri, 14 Aug 2015 16:44:36 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on cubieboard2 Enable the otg/drc usb controller on the cubieboard2. Note this board has the otg-vbus connected directly to the 5v-dcc of the board, so there is no vbus0 regulator, nor vbus0-det. Signed-off-by: Ralph Benadski Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 39a51d5143f7..9ff459bd38b3 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -150,6 +150,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_cubieboard2: led_pins@0 { allwinner,pins = "PH20", "PH21"; @@ -157,12 +161,24 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_ahci_5v { status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + #include "axp209.dtsi" ®_dcdc2 { @@ -205,6 +221,9 @@ }; &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 49e86fd98b726d176ed3fd15d1bc14352bb4b171 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 19 Aug 2015 16:57:22 +0800 Subject: ARM: dts: sun6i: hummingbird: Add missing pinmux setting for gmac phy reset Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d0cfadac0691..06d9391ca30e 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -73,7 +73,7 @@ &gmac { pinctrl-names = "default"; - pinctrl-0 = <&gmac_pins_rgmii_a>; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_hummingbird>; phy = <&phy1>; phy-mode = "rgmii"; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; @@ -146,6 +146,13 @@ }; &pio { + gmac_phy_reset_pin_hummingbird: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { allwinner,pins = "PA8"; allwinner,function = "gpio_in"; -- cgit v1.2.3-70-g09d2 From 2a9a5cfaf1c1d0d6f34887faaa05cc86ff9b4288 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 7 Aug 2015 17:22:33 +0200 Subject: ARM: dts: sun5i: Add support for the Auxtek-T003 HDMI stick The Auxtek-T003 HDMI stick is an A10s based HDMI stick with USB wifi, and composite video out support. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts | 159 +++++++++++++++++++++++++++ 2 files changed, 160 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 1920876d6eb9..b4b9ed6de422 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -587,6 +587,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb dtb-$(CONFIG_MACH_SUN5I) += \ + sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ diff --git a/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts new file mode 100644 index 000000000000..d4ad02182353 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-auxtek-t003.dts @@ -0,0 +1,159 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "Auxtek t003 A10s hdmi tv-stick"; + compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_t003>; + + red { + label = "t003-tv-dongle:red:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ + default-state = "on"; + }; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp152: pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t003>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_t003: mmc0_cd_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_t003: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb0_vbus { + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ + status = "okay"; +}; + +®_usb1_vbus { + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG13"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PB10"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From cb8b85a89ac80d9a15ad518b7fc74a360c59e5c2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Aug 2015 00:37:22 +0200 Subject: ARM: dts: sun4i: inet97fv2: Disable unused usb controllers The inet97fv2 tablet only has a usb-2 wifi device connected to the second ehci controller, disable the first ehci controller and both ohci controllers. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 17 ----------------- 1 file changed, 17 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 6c927a824ba2..51621c568382 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -61,10 +61,6 @@ }; }; -&ehci0 { - status = "okay"; -}; - &ehci1 { status = "okay"; }; @@ -94,18 +90,6 @@ status = "okay"; }; -&ohci0 { - status = "okay"; -}; - -&ohci1 { - status = "okay"; -}; - -®_usb1_vbus { - status = "okay"; -}; - ®_usb2_vbus { status = "okay"; }; @@ -117,7 +101,6 @@ }; &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 5fed0cbf4f65ff91694e64899cdcca67c59a5767 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Aug 2015 00:37:23 +0200 Subject: ARM: dts: sun4i: inet97fv2: Add regulator nodes Use axp209.dtsi and add regulator nodes for the regulators used on the inet97fv2 tablet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 35 +++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 51621c568382..69e22bda1d7e 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -61,6 +61,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci1 { status = "okay"; }; @@ -71,15 +75,13 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; +#include "axp209.dtsi" + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; @@ -90,6 +92,31 @@ status = "okay"; }; +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb2_vbus { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 64a6295e620204e8a9d4429c3e59544022eeef45 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Aug 2015 00:37:24 +0200 Subject: ARM: dts: sun4i: inet97fv2: Enable otg controller Enable the otg controller on the inet97fv2 tablet. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 34 +++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 69e22bda1d7e..309a0daa31cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -92,6 +92,26 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + ®_dcdc2 { regulator-always-on; regulator-min-microvolt = <1000000>; @@ -117,6 +137,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb2_vbus { status = "okay"; }; @@ -127,7 +151,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 2d4f66355b37b149efb63887226f3bb71342b5aa Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Aug 2015 00:37:25 +0200 Subject: ARM: dts: sun4i: inet97fv2: Enable support for tablet keys Enable support for the tablet keys which are connected via the lradc. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 41 +++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 309a0daa31cd..909fde9edfed 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include +#include / { model = "INet-97F Rev 02"; @@ -82,6 +83,46 @@ #include "axp209.dtsi" +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1200000>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; -- cgit v1.2.3-70-g09d2 From ff9dc0b93b7ef0e3b431d76cbc6d4babb6a0dabb Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Mon, 24 Aug 2015 00:37:26 +0200 Subject: ARM: dts: sun4i: inet97fv2: Enable i2c1 and i2c2 controllers Enable i2c1 and i2c2 controllers, these are used for the touchscreen resp. the accelerometer. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 909fde9edfed..77c31dab86b1 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -83,6 +83,18 @@ #include "axp209.dtsi" +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + &lradc { vref-supply = <®_ldo2>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 61d2595cd12931708a69960df8b674c5e3fbba03 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 28 Aug 2015 17:54:34 +0800 Subject: ARM: dts: sun6i: Add lradc node sun6i also has the LRADC for tablet buttons. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 54bb83b58f42..431c7c884e1c 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -768,6 +768,13 @@ reg = <0x01c20ca0 0x20>; }; + lradc: lradc@01c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x100>; + interrupts = ; + status = "disabled"; + }; + rtp: rtp@01c25000 { compatible = "allwinner,sun6i-a31-ts"; reg = <0x01c25000 0x100>; -- cgit v1.2.3-70-g09d2 From 4917c46ced2f225e2f94f066c1c52d9f264cce3b Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 28 Aug 2015 17:54:37 +0800 Subject: ARM: dts: sun6i: Add mmc2 pins for 8 bit emmc This also includes the reset pin for emmc. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 431c7c884e1c..98359f37bf11 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -691,6 +691,16 @@ allwinner,pull = ; }; + mmc2_8bit_emmc_pins: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11", "PC12", + "PC13", "PC14", "PC15", + "PC24"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; + gmac_pins_mii_a: gmac_mii@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA8", "PA9", "PA11", -- cgit v1.2.3-70-g09d2 From ac1dd1dcc55044dfd2b8039ae974fec6d2ab2c77 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 28 Aug 2015 15:15:17 +0200 Subject: ARM: dts: sun5i: Add dts file for inet98v_rev2 based tablets The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts | 227 ++++++++++++++++++++++++++ 2 files changed, 228 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index b4b9ed6de422..0fbe29b809b0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -593,6 +593,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ sun5i-a13-hsg-h702.dtb \ + sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-utoo-p66.dtb diff --git a/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts new file mode 100644 index 000000000000..6fa54b661423 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-inet-98v-rev2.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include +#include + +/ { + model = "INet-98V Rev 02"; + compatible = "primux,inet98v-rev2", "allwinner,sun5i-a13"; + + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + status = "okay"; + + mmccard: mmccard@0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb0_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_ldo3>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 72df94cbec320860f759258b5677f72caa5d4777 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 5 Sep 2015 16:55:51 +0200 Subject: ARM: dts: sunxi: Add sun?i-q8-common.dtsi files for q8 tablets Cheap allwinner based devices in the q8 enclosure come in many variants, all sharing the case and a number of other basic features. They differ in the display, touchscreen, accelerometer and wifi chips used. This commit adds 2 dtsi files defining the shared features of all the q8 tablets. sunxi-q8-common.dtsi defines features shared amongst all q8 tablets, sun8i-q8-common.dtsi defines features shared amongst all a23 / a33 based q8 tablets, but not with a13 q8 based tablets. a13 based tablets use a different card-detect pin for the mmc, and use uart1 instead of the r_uart for the serial console. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 76 +++----------------------- arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts | 70 +----------------------- arch/arm/boot/dts/sun8i-q8-common.dtsi | 77 +++++++++++++++++++++++++++ arch/arm/boot/dts/sunxi-q8-common.dtsi | 77 +++++++++++++++++++++++++++ 4 files changed, 162 insertions(+), 138 deletions(-) create mode 100644 arch/arm/boot/dts/sun8i-q8-common.dtsi create mode 100644 arch/arm/boot/dts/sunxi-q8-common.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index 8d9da6886a4c..4f47fd654eea 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -44,35 +44,11 @@ /dts-v1/; #include "sun8i-a23.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +#include "sun8i-q8-common.dtsi" / { model = "Ippo Q8H Dual Core Tablet (v5)"; compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; }; &i2c2 { @@ -82,50 +58,12 @@ status = "failed"; }; -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; -}; - +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ &usb_otg { dr_mode = "host"; status = "okay"; diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts index a43897515fb6..b8439cb71003 100644 --- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts +++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -42,79 +42,11 @@ /dts-v1/; #include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include +#include "sun8i-q8-common.dtsi" / { model = "Ippo Q8H Quad Core Tablet (v1.2)"; compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33"; - - aliases { - serial0 = &r_uart; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&i2c0 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins_a>; - status = "okay"; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; - vmmc-supply = <®_vcc3v0>; - bus-width = <4>; - cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ - cd-inverted; - status = "okay"; -}; - -&pio { - mmc0_cd_pin_q8h: mmc0_cd_pin@0 { - allwinner,pins = "PB4"; - allwinner,function = "gpio_in"; - allwinner,drive = ; - allwinner,pull = ; - }; -}; - -&r_uart { - pinctrl-names = "default"; - pinctrl-0 = <&r_uart_pins_a>; - status = "okay"; }; /* diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi new file mode 100644 index 000000000000..6f8a8bb4e9bb --- /dev/null +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -0,0 +1,77 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +/ { + aliases { + serial0 = &r_uart; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ + cd-inverted; + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PB4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_uart { + pinctrl-names = "default"; + pinctrl-0 = <&r_uart_pins_a>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi new file mode 100644 index 000000000000..17b26ffd03aa --- /dev/null +++ b/arch/arm/boot/dts/sunxi-q8-common.dtsi @@ -0,0 +1,77 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include +#include "sunxi-common-regulators.dtsi" + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@400 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; +}; -- cgit v1.2.3-70-g09d2 From 2ecf488b149c88f2f94e63df38d4d038e7fb6247 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 9 Sep 2015 10:23:23 +0200 Subject: ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet. These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen. Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 227 +++++++++++++++++++++++++++ 2 files changed, 228 insertions(+) create mode 100644 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 0fbe29b809b0..332054f3e382 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -578,6 +578,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts new file mode 100644 index 000000000000..2fffc0434075 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts @@ -0,0 +1,227 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include +#include + +/ { + model = "iNet-9F Rev 03"; + compatible = "inet-tek,inet9f-rev03", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Menu"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@600 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <600000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; + + button@1000 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Esc"; + linux,code = ; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From b92b14909eba9ebe30da6aa041d99f9d4b47dc3e Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 9 Sep 2015 10:23:24 +0200 Subject: ARM: dts: sun4i: Add dts file for iNet-1 based tablets The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007. This patch has been tested on both rev2 and rev5 of this board / these tablets. It comes with a rtl8188cus usb wifi connected to ehci1, focal ft5406ee8 touchscreen connected to i2c2 addr 0x38, bosch bma 250 accelerometer connected to i2c1 addr 0x18 and the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun4i-a10-inet1.dts | 226 ++++++++++++++++++++++++++++++++++ 2 files changed, 227 insertions(+) create mode 100644 arch/arm/boot/dts/sun4i-a10-inet1.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 332054f3e382..7b554f701412 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -577,6 +577,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet1.dtb \ sun4i-a10-inet97fv2.dtb \ sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-inet1.dts b/arch/arm/boot/dts/sun4i-a10-inet1.dts new file mode 100644 index 000000000000..487ce63519dc --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-inet1.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include +#include + +/ { + model = "iNet-1"; + compatible = "inet-tek,inet1", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + /* Accelerometer */ + bma250@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH0 / EINT0 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@200 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <200000>; + }; + + button@1000 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <1000000>; + }; + + button@1200 { + label = "Home"; + linux,code = ; + channel = <0>; + voltage = <1200000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From e89ecbf141aa6301b3d5dff9d2a123700140a920 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Thu, 10 Sep 2015 10:31:17 +0200 Subject: dts: sunxi: add eeprom to A10 OLinuXino Lime board The Olimex A10 OLinuXino Lime features an eeprom that is always on the board. This patch adds it to the dts. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 28e32ad705cd..b350448c7217 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -124,6 +124,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mdio { status = "okay"; -- cgit v1.2.3-70-g09d2 From ce350094cadc53ee21abe9f697bfb2dd3a8aaa49 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Thu, 10 Sep 2015 10:31:18 +0200 Subject: dts: sunxi: correct vendor prefix on OLinuXino a10s micro The OLinuXino A10S micro features an eeprom. According to the eeprom.txt binding document, we should use the manufacturer and 'at' is not the proper manufacturer id according to the vendor-prefixes. This patch takes the proper vendor-prefix and uses it for the eeprom node. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index 5a422c1ff725..86d046a502e6 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -111,7 +111,7 @@ status = "okay"; at24@50 { - compatible = "at,24c16"; + compatible = "atmel,24c16"; pagesize = <16>; reg = <0x50>; read-only; -- cgit v1.2.3-70-g09d2 From d2057c59beec4b977b6b4c199f549ecfcf980cf9 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Thu, 10 Sep 2015 10:31:19 +0200 Subject: dts: sunxi: add eeprom to A20 OLinuXino Lime board The Olimex A20 OLinuXino Lime features an eeprom that is always on the board. This patch adds it to the dts. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 04237085dc39..35ad7006c53c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -117,6 +117,18 @@ }; }; +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; -- cgit v1.2.3-70-g09d2 From dbca81d2f9eec95b50fb79752dad0cc5d821eeb2 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Thu, 10 Sep 2015 10:31:20 +0200 Subject: dts: sunxi: add eeprom to A20 OLinuXino Lime2 board The Olimex A20 OLinuXino Lime2 features an eeprom that is always on the board. This patch adds it to the dts. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 913032f4fa47..d5c796c8d16f 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -170,6 +170,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &mmc0 { -- cgit v1.2.3-70-g09d2 From f49243f13075901a0674e19b6e77d5ccd27d6a24 Mon Sep 17 00:00:00 2001 From: Olliver Schinagl Date: Thu, 10 Sep 2015 10:31:21 +0200 Subject: dts: sunxi: add eeprom to A20 OLinuXino micro board The Olimex A20 OLinuXino Micro features an eeprom that is always on the board. This patch adds it to the dts. Signed-off-by: Olliver Schinagl Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index c5d70caade82..7e3006f6a775 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -125,6 +125,12 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; }; &i2c2 { -- cgit v1.2.3-70-g09d2 From bea9b7bcf3f7597092de7cac5d43370fa004e2c5 Mon Sep 17 00:00:00 2001 From: Jelle van der Waa Date: Thu, 10 Sep 2015 15:05:58 +0200 Subject: ARM: dts: sun5i: Add emac_pins_b definition The emac pins on an A10s can also be routed to the outside through PORTD rather then through PORTA, add a pinctrl node for this. Signed-off-by: Jelle van der Waa Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 7dd016fab318..0fdabe8eb9e8 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -222,6 +222,17 @@ allwinner,pull = ; }; + emac_pins_b: emac0@1 { + allwinner,pins = "PD6", "PD7", "PD10", + "PD11", "PD12", "PD13", "PD14", + "PD15", "PD18", "PD19", "PD20", + "PD21", "PD22", "PD23", "PD24", + "PD25", "PD26", "PD27"; + allwinner,function = "emac"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc1_pins_a: mmc1@0 { allwinner,pins = "PG3", "PG4", "PG5", "PG6", "PG7", "PG8"; -- cgit v1.2.3-70-g09d2 From adfa06ce9bd30f8bc5439be49bcfaa7ceb1b6c2a Mon Sep 17 00:00:00 2001 From: Jelle van der Waa Date: Thu, 10 Sep 2015 15:05:59 +0200 Subject: ARM: dts: sun5i: Add dts file for the Wobo i5 top set box The Wobo i5 top set box is a somewhat curious A10s based top set box, it uses an AXP209 rather then the AXP152 usually used in combination with the A10s. It has an ethernet phy connected to PORTD rather then PORTA, and its built-in usb wifi is connected via the otg controller. This commit adds a dts file adding support for this top set box. Signed-off-by: Jelle van der Waa Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts | 224 +++++++++++++++++++++++++++++++ 2 files changed, 225 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 7b554f701412..59c53cb1bb70 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -594,6 +594,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-mk802.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a10s-r7-tv-dongle.dtb \ + sun5i-a10s-wobo-i5.dtb \ sun5i-a13-hsg-h702.dtb \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ diff --git a/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts new file mode 100644 index 000000000000..9fea918f949e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a10s-wobo-i5.dts @@ -0,0 +1,224 @@ +/* + * Copyright 2015 Jelle van der Waa + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a10s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "A10s-Wobo i5"; + compatible = "wobo,a10s-wobo-i5", "allwinner,sun5i-a10s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_wobo_i5>; + + blue { + label = "a10s-wobo-i5:blue:usr"; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + reg_emac_3v3: emac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&emac_power_pin_wobo>; + regulator-name = "emac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 0 2 GPIO_ACTIVE_HIGH>; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_b>; + phy = <&phy1>; + status = "okay"; +}; + +&emac_sram { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&mdio { + phy-supply = <®_emac_3v3>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_wobo_i5>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + led_pins_wobo_i5: led_pins@0 { + allwinner,pins = "PB2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_wobo_i5: mmc0_cd_pin@0 { + allwinner,pins = "PB3"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + emac_power_pin_wobo: emac_power_pin@0 { + allwinner,pins = "PA02"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_usb1_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PG12"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 5d97c677a94ea701650b642b3425b46d993e2af7 Mon Sep 17 00:00:00 2001 From: Sander Vermin Date: Sun, 13 Sep 2015 20:26:01 +0200 Subject: ARM: dts: sun6i: Add accelerometer on Columbus A31 Add mma8452 accelerometer to sun6i-a31-colombus.dts. Signed-off-by: Sander Vermin Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 8843420a4cba..813f715eff5c 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -92,6 +92,13 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins_a>; status = "okay"; + + mma8452: mma8452@1d { + compatible = "fsl,mma8452"; + reg = <0x1d>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_LOW>; /* PA9 */ + }; }; &mmc0 { -- cgit v1.2.3-70-g09d2 From 6f1606bfe9cc2111072d48c65bab33d4d267024c Mon Sep 17 00:00:00 2001 From: Yassin Jaffer Date: Wed, 16 Sep 2015 00:05:54 +1000 Subject: ARM: dts: sun7i: Add keypad clk node This patch add support to the keypad clock on sun7i Signed-off-by: Yassin Jaffer Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 391230c3dc93..3a68852f6706 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -465,6 +465,14 @@ clock-output-names = "ir1"; }; + keypad_clk: clk@01c200c4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c200c4 0x4>; + clocks = <&osc24M>; + clock-output-names = "keypad"; + }; + usb_clk: clk@01c200cc { #clock-cells = <1>; #reset-cells = <1>; -- cgit v1.2.3-70-g09d2 From 832f977c8bb7c4a0ddfdc809448af6af34436f99 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 18 Sep 2015 15:35:36 +0800 Subject: ARM: dts: sun8i: Add PWM controller node for A23/A33 A23/A33 have a PWM controller that is compatible to the one on the A20. Add a device node for it. Signed-off-by: Chen-Yu Tsai Reviewed-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 27a925ec17d2..e7054304018a 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -466,6 +466,14 @@ interrupts = ; }; + pwm: pwm@01c21400 { + compatible = "allwinner,sun7i-a20-pwm"; + reg = <0x01c21400 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + lradc: lradc@01c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; -- cgit v1.2.3-70-g09d2 From 29a0d085b759ef7c1d63918c4dd04daec3860a12 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 18 Sep 2015 15:35:37 +0800 Subject: ARM: dts: sun8i: Add PWM channel 0 pinmux setting for A23/A33 The PWM controller has 2 outputs, with one usable pin for each. Add a pinmux setting for the first channel. This is often used for backlight dimming on tablets. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index e7054304018a..8f4db82084c5 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -412,6 +412,13 @@ allwinner,pull = ; }; + pwm0_pins: pwm0 { + allwinner,pins = "PH0"; + allwinner,function = "pwm0"; + allwinner,drive = ; + allwinner,pull = ; + }; + i2c0_pins_a: i2c0@0 { allwinner,pins = "PH2", "PH3"; allwinner,function = "i2c0"; -- cgit v1.2.3-70-g09d2 From d5c1274f26c18c4e3037cf7667d967388a73348b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 5 Sep 2015 16:55:52 +0200 Subject: ARM: dts: sun5i: Add sun5i-q8-common.dtsi This is the sun5i / a13 version of sun8i-q8-common.dtsi for use in dts files for a13 q8 based tablets. Compared to sun8i this uses uart1 for the serial console, and PG0 for card-detect for mmc0. This also adds pmic and otg support, which both use the same config on all known q8 a13 devices. This is not present in sun5i-q8-common.dtsi because pmic / otg support for sun8i has not yet been merged. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-q8-common.dtsi | 170 +++++++++++++++++++++++++++++++++ 1 file changed, 170 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-q8-common.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi new file mode 100644 index 000000000000..0641d68a6d82 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include "sunxi-q8-common.dtsi" + +/ { + aliases { + serial0 = &uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +&i2c1 { + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_q8: mmc0_cd_pin@0 { + allwinner,pins = "PG0"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PG1"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_pin_a: usb0_vbus_pin@0 { + allwinner,pins = "PG12"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_det-gpio = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From eb2217b4c25e3796b0e834ce6e4fb5490ee9ab27 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 5 Sep 2015 16:55:53 +0200 Subject: ARM: dts: sun5i: Add dts file for q8 formfactor a13 based tablets This commits adds a generic dts file for q8 formfactor a13 based tablets. The tablets ship in many variants, with the difference mainly being the touchscreen controller / accelerometer / wifi chip used. The wifi is USB based, and thus not listed in devicetree. The touchscreen controller / accelerometer may turn out to be a problem once we add support for those. We can either do something with devicetree overlays, or add sun5i-a13--.dts files. The latter is what the android mod community is doing with firmware images. This dts was tested with an a13 q8 tablet with a pcb labelled: "94V-0", silead gsl1680 touchscreen controller and a mc32x0 accelerometer. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun5i-a13-q8-tablet.dts | 60 +++++++++++++++++++++++++++++++ 2 files changed, 61 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-a13-q8-tablet.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 59c53cb1bb70..d811bff4b3f6 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -599,6 +599,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-inet-98v-rev2.dtb \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ + sun5i-a13-q8-tablet.dtb \ sun5i-a13-utoo-p66.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ diff --git a/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts new file mode 100644 index 000000000000..72e93acb5a9e --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-q8-tablet.dts @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-a13.dtsi" +#include "sun5i-q8-common.dtsi" + +/ { + model = "Q8 A13 Tablet"; + compatible = "allwinner,q8-a13", "allwinner,sun5i-a13"; +}; + +®_ldo3 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&usbphy { + usb1_vbus-supply = <®_ldo3>; +}; -- cgit v1.2.3-70-g09d2 From fe8872c176255c13a9c72e1a3679fec475b849c4 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 18 Aug 2015 19:32:56 +0200 Subject: ARM: sun8i: Add the A33 AHB1 gates clock driver The A33 has a different gates array than the A23, add the node to the DT. Reported-by: Chen-Yu Tsai Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index faa7d3c1fcea..3457edb3bf50 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -72,6 +72,33 @@ clock-output-names = "pll11"; }; + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a33-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <5>, + <6>, <8>, <9>, + <10>, <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <53>, + <54>, <57>, + <58>; + clock-output-names = "ahb1_mipidsi", "ahb1_ss", + "ahb1_dma","ahb1_mmc0", "ahb1_mmc1", + "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc", + "ahb1_sat"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; -- cgit v1.2.3-70-g09d2 From f42a9505d1da7b0caf4bc6e7b3eb133631ed03ec Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 18 Aug 2015 19:34:06 +0200 Subject: ARM: sun8i: Move A23 AHB1 gates out of common DTSI The AHB1 gates were assumed to be identical between the A23 and the A33, which turned out to be wrong. Move the A23 gates definition to the A23 DTSI. Reported-by: Chen-Yu Tsai Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 25 ------------------------- arch/arm/boot/dts/sun8i-a23.dtsi | 25 +++++++++++++++++++++++++ 2 files changed, 25 insertions(+), 25 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 8f4db82084c5..04bccad977ee 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -175,31 +175,6 @@ clock-output-names = "apb1"; }; - ahb1_gates: clk@01c20060 { - #clock-cells = <1>; - compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; - reg = <0x01c20060 0x8>; - clocks = <&ahb1>; - clock-indices = <1>, <6>, - <8>, <9>, <10>, - <13>, <14>, - <19>, <20>, - <21>, <24>, <26>, - <29>, <32>, <36>, - <40>, <44>, <46>, - <52>, <54>, - <57>; - clock-output-names = "ahb1_mipidsi", "ahb1_dma", - "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", - "ahb1_nand", "ahb1_sdram", - "ahb1_hstimer", "ahb1_spi0", - "ahb1_spi1", "ahb1_otg", "ahb1_ehci", - "ahb1_ohci", "ahb1_ve", "ahb1_lcd", - "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; - }; - apb1_gates: clk@01c20068 { #clock-cells = <1>; compatible = "allwinner,sun8i-a23-apb1-gates-clk"; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 2cc27c7a59dc..4a85e213843b 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -50,6 +50,31 @@ }; clocks { + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-indices = <1>, <6>, + <8>, <9>, <10>, + <13>, <14>, + <19>, <20>, + <21>, <24>, <26>, + <29>, <32>, <36>, + <40>, <44>, <46>, + <52>, <54>, + <57>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; -- cgit v1.2.3-70-g09d2 From 36034fc1957d55837189075076a502051784a805 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 18 Aug 2015 19:36:18 +0200 Subject: ARM: sun8i: A23: Add missing msgbox gate Even though it's not mentionned in the A23 user manual, the A23 has a gate for the AHB1 clock to the msgbox IP. Add it to the clock-indices. Reported-by: Chen-Yu Tsai Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi index 4a85e213843b..92e6616979ea 100644 --- a/arch/arm/boot/dts/sun8i-a23.dtsi +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -62,8 +62,8 @@ <21>, <24>, <26>, <29>, <32>, <36>, <40>, <44>, <46>, - <52>, <54>, - <57>; + <52>, <53>, + <54>, <57>; clock-output-names = "ahb1_mipidsi", "ahb1_dma", "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", "ahb1_nand", "ahb1_sdram", @@ -71,8 +71,8 @@ "ahb1_spi1", "ahb1_otg", "ahb1_ehci", "ahb1_ohci", "ahb1_ve", "ahb1_lcd", "ahb1_csi", "ahb1_be", "ahb1_fe", - "ahb1_gpu", "ahb1_spinlock", - "ahb1_drc"; + "ahb1_gpu", "ahb1_msgbox", + "ahb1_spinlock", "ahb1_drc"; }; mbus_clk: clk@01c2015c { -- cgit v1.2.3-70-g09d2 From f5f1c2cbe8785c212794067ce57aeb6439be7ac1 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 20 Sep 2015 08:30:50 -0400 Subject: ARM: dts: sun8i: Add pwm-backlight device for A23/A33 Q8 format tablets The LCD backlight on the A23/A33 Q8 format tablets is enabled with a GPIO controlled regulator, and brightness controlled with the SoC's PWM controller. The backlight is powered from the AXP223 PMIC's DC1SW output, which is not supported yet. A proper bootloader is required to enable it. The brightness levels are arbitrary. The FEX files do not have such information. As such, actual brightness levels may differ from device to device. Signed-off-by: Chen-Yu Tsai Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index 6f8a8bb4e9bb..f34273602f64 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -41,11 +41,24 @@ */ #include "sunxi-q8-common.dtsi" +#include + / { aliases { serial0 = &r_uart; }; + backlight: backlight { + compatible = "pwm-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en_pin_q8>; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + enable-gpios = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + /* backlight is powered by AXP223 DC1SW */ + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -62,6 +75,13 @@ }; &pio { + bl_en_pin_q8: bl_en_pin@0 { + allwinner,pins = "PH6"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_q8: mmc0_cd_pin@0 { allwinner,pins = "PB4"; allwinner,function = "gpio_in"; -- cgit v1.2.3-70-g09d2 From f7ad082cac8ec0a6af2d77513f9897374b9b3e9d Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 23 Sep 2015 12:34:39 +0800 Subject: ARM: dts: sun8i-a33: Add security system crypto engine clock and device nodes A33 has the same "Security System" crypto engine as A10/A20, but with a separate reset control. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi index 3457edb3bf50..001d8402ca18 100644 --- a/arch/arm/boot/dts/sun8i-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a33.dtsi @@ -99,6 +99,14 @@ "ahb1_sat"; }; + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 0>; + clock-output-names = "ss"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun8i-a23-mbus-clk"; @@ -109,6 +117,16 @@ }; soc@01c00000 { + crypto: crypto-engine@01c15000 { + compatible = "allwinner,sun4i-a10-crypto"; + reg = <0x01c15000 0x1000>; + interrupts = ; + clocks = <&ahb1_gates 5>, <&ss_clk>; + clock-names = "ahb", "mod"; + resets = <&ahb1_rst 5>; + reset-names = "ahb"; + }; + usb_otg: usb@01c19000 { compatible = "allwinner,sun8i-a33-musb"; reg = <0x01c19000 0x0400>; -- cgit v1.2.3-70-g09d2 From 0372bb6b92a438a539f5a2d58b1979f999170813 Mon Sep 17 00:00:00 2001 From: Priit Laes Date: Wed, 23 Sep 2015 10:38:31 +0300 Subject: ARM: dts: sun4i: gemei-g9: Add accelerometer (bma250) IRQ Add IRQ configuration for bma250 accelerometer. Signed-off-by: Priit Laes Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-gemei-g9.dts | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts index 570754d8df67..3f0aeb8288cd 100644 --- a/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts +++ b/arch/arm/boot/dts/sun4i-a10-gemei-g9.dts @@ -47,6 +47,7 @@ #include "sunxi-common-regulators.dtsi" #include #include +#include / { model = "Gemei G9 Tablet"; @@ -64,7 +65,7 @@ /* * TODO: * 2x cameras via CSI - * bma250 IRQs + * audio * AXP battery management * NAND * OTG @@ -103,12 +104,8 @@ bma250@18 { compatible = "bosch,bma250"; reg = <0x18>; - - /* - * TODO: interrupt pins: - * int1 - PH00 - * int2 - PI10 - */ + interrupt-parent = <&pio>; + interrupts = <7 0 IRQ_TYPE_EDGE_RISING>; /* PH00 / EINT0 */ }; }; -- cgit v1.2.3-70-g09d2 From 40088eb4071ecc40e2b7ded71b0c06f216385efe Mon Sep 17 00:00:00 2001 From: Aleksei Mamlin Date: Thu, 24 Sep 2015 10:33:46 +0300 Subject: ARM: dts: sun4i: Enable USB DRC on the Marsboard A10 Enable the otg/drc usb controller on the Marsboard A10. Similar to Cubieboard, the 5V of the otg is directly connected to the general 5V, so we only use the id pin. Signed-off-by: Aleksei Mamlin Reviewed-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-marsboard.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 02158bcd64ee..9a012db79963 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -154,6 +154,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_marsboard: led_pins@0 { allwinner,pins = "PB5", "PB6", "PB7", "PB8"; @@ -161,6 +165,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; ®_usb1_vbus { @@ -184,7 +195,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 849147cdb540266883cb49f2094a87b3ee6e12ec Mon Sep 17 00:00:00 2001 From: Lawrence Yu Date: Tue, 22 Sep 2015 08:50:50 -0700 Subject: ARM: dts: sun6i: Add support for Yones Toptech bs1078v2 tablets The bs1078v2 is a pcb found in 10.1" tablets with an A31 soc, 1G RAM and 8G NAND, rtl8723as usb wifi, 1 micro USB OTG port, 1 USB HOST port This commit adds a dts for v2 of the bs1078 pcb. Signed-off-by: Lawrence Yu Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- .../dts/sun6i-a31s-yones-toptech-bs1078-v2.dts | 134 +++++++++++++++++++++ 2 files changed, 136 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d811bff4b3f6..5dbfcb9884af 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -608,7 +608,8 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-i7.dtb \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ - sun6i-a31s-cs908.dtb + sun6i-a31s-cs908.dtb \ + sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ sun7i-a20-bananapro.dtb \ diff --git a/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts new file mode 100644 index 000000000000..b199020733d3 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-yones-toptech-bs1078-v2.dts @@ -0,0 +1,134 @@ +/* + * Copyright 2015 Lawrence Yu + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Yones TopTech BS1078 v2 Tablet"; + compatible = "yones-toptech,bs1078-v2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + i2c1 = &i2c1; + i2c2 = &i2c2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + mmc0_cd_pin_bs1078v2: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bs1078v2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = ; +}; + +®_usb1_vbus { + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb1_vbus_pin_a { + allwinner,pins = "PH27"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 1ee35c05d9c67771d649f687e6f76e61e76eb779 Mon Sep 17 00:00:00 2001 From: Yingjoe Chen Date: Wed, 16 Sep 2015 09:35:25 +0800 Subject: arm64: mt8173.dtsi: correct i2c node names Node name in device tree should describe general class of the device. Correct incorrect i2c node names. Signed-off-by: Yingjoe Chen Reviewed-by: Daniel Kurtz Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index d18ee4259ee5..7f360b744571 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -365,7 +365,7 @@ status = "disabled"; }; - i2c3: i2c3@11010000 { + i2c3: i2c@11010000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11010000 0 0x70>, <0 0x11000280 0 0x80>; @@ -381,7 +381,7 @@ status = "disabled"; }; - i2c4: i2c4@11011000 { + i2c4: i2c@11011000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11011000 0 0x70>, <0 0x11000300 0 0x80>; @@ -397,7 +397,7 @@ status = "disabled"; }; - i2c6: i2c6@11013000 { + i2c6: i2c@11013000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11013000 0 0x70>, <0 0x11000080 0 0x80>; -- cgit v1.2.3-70-g09d2 From b0c936f59c8928dac2b230322dd51cbfae289151 Mon Sep 17 00:00:00 2001 From: Leilk Liu Date: Mon, 31 Aug 2015 21:44:19 +0800 Subject: arm64: dts: Add spi bus dts This patch adds MT8173 spi bus controllers into device tree. Signed-off-by: Leilk Liu Reviewed-and-Tested-by: Nicolas Boichat Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 18 ++++++++++++++++++ arch/arm64/boot/dts/mediatek/mt8173.dtsi | 13 +++++++++++++ 2 files changed, 31 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts index 4be66cadbc7c..811cb760ba49 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts @@ -387,6 +387,24 @@ }; }; +&pio { + spi_pins_a: spi0 { + pins_spi { + pinmux = , + , + , + ; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins_a>; + mediatek,pad-select = <0>; + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 7f360b744571..4bce1676fbd1 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -365,6 +365,19 @@ status = "disabled"; }; + spi: spi@1100a000 { + compatible = "mediatek,mt8173-spi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0 0x1100a000 0 0x1000>; + interrupts = ; + clocks = <&topckgen CLK_TOP_SYSPLL3_D2>, + <&topckgen CLK_TOP_SPI_SEL>, + <&pericfg CLK_PERI_SPI0>; + clock-names = "parent-clk", "sel-clk", "spi-clk"; + status = "disabled"; + }; + i2c3: i2c@11010000 { compatible = "mediatek,mt8173-i2c"; reg = <0 0x11010000 0 0x70>, -- cgit v1.2.3-70-g09d2 From d4499e255eec6b004f97610efa90cae4d1b41ec1 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Fri, 25 Sep 2015 15:46:35 +0200 Subject: ARM: dts: mt8135-evbp1: remove regulator-compatible usage The regulator-compatible property from the regulator DT binding was deprecated and the correct approach is to use the node's name. This patch has no functional changes since the values of the node's name and the regulator-compatible match for all the regulators. Signed-off-by: Javier Martinez Canillas Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8135-evbp1.dts | 23 ----------------------- 1 file changed, 23 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/mt8135-evbp1.dts b/arch/arm/boot/dts/mt8135-evbp1.dts index 357a91fc2d1d..460db6d05952 100644 --- a/arch/arm/boot/dts/mt8135-evbp1.dts +++ b/arch/arm/boot/dts/mt8135-evbp1.dts @@ -32,7 +32,6 @@ compatible = "mediatek,mt6397-regulator"; mt6397_vpca15_reg: buck_vpca15 { - regulator-compatible = "buck_vpca15"; regulator-name = "vpca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -41,7 +40,6 @@ }; mt6397_vpca7_reg: buck_vpca7 { - regulator-compatible = "buck_vpca7"; regulator-name = "vpca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -50,7 +48,6 @@ }; mt6397_vsramca15_reg: buck_vsramca15 { - regulator-compatible = "buck_vsramca15"; regulator-name = "vsramca15"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -59,7 +56,6 @@ }; mt6397_vsramca7_reg: buck_vsramca7 { - regulator-compatible = "buck_vsramca7"; regulator-name = "vsramca7"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -68,7 +64,6 @@ }; mt6397_vcore_reg: buck_vcore { - regulator-compatible = "buck_vcore"; regulator-name = "vcore"; regulator-min-microvolt = < 850000>; regulator-max-microvolt = <1350000>; @@ -77,7 +72,6 @@ }; mt6397_vgpu_reg: buck_vgpu { - regulator-compatible = "buck_vgpu"; regulator-name = "vgpu"; regulator-min-microvolt = < 700000>; regulator-max-microvolt = <1350000>; @@ -86,7 +80,6 @@ }; mt6397_vdrm_reg: buck_vdrm { - regulator-compatible = "buck_vdrm"; regulator-name = "vdrm"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; @@ -95,7 +88,6 @@ }; mt6397_vio18_reg: buck_vio18 { - regulator-compatible = "buck_vio18"; regulator-name = "vio18"; regulator-min-microvolt = <1620000>; regulator-max-microvolt = <1980000>; @@ -104,19 +96,16 @@ }; mt6397_vtcxo_reg: ldo_vtcxo { - regulator-compatible = "ldo_vtcxo"; regulator-name = "vtcxo"; regulator-always-on; }; mt6397_va28_reg: ldo_va28 { - regulator-compatible = "ldo_va28"; regulator-name = "va28"; regulator-always-on; }; mt6397_vcama_reg: ldo_vcama { - regulator-compatible = "ldo_vcama"; regulator-name = "vcama"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <2800000>; @@ -124,18 +113,15 @@ }; mt6397_vio28_reg: ldo_vio28 { - regulator-compatible = "ldo_vio28"; regulator-name = "vio28"; regulator-always-on; }; mt6397_vusb_reg: ldo_vusb { - regulator-compatible = "ldo_vusb"; regulator-name = "vusb"; }; mt6397_vmc_reg: ldo_vmc { - regulator-compatible = "ldo_vmc"; regulator-name = "vmc"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; @@ -143,7 +129,6 @@ }; mt6397_vmch_reg: ldo_vmch { - regulator-compatible = "ldo_vmch"; regulator-name = "vmch"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -151,7 +136,6 @@ }; mt6397_vemc_3v3_reg: ldo_vemc3v3 { - regulator-compatible = "ldo_vemc3v3"; regulator-name = "vemc_3v3"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; @@ -159,7 +143,6 @@ }; mt6397_vgp1_reg: ldo_vgp1 { - regulator-compatible = "ldo_vgp1"; regulator-name = "vcamd"; regulator-min-microvolt = <1220000>; regulator-max-microvolt = <3300000>; @@ -167,7 +150,6 @@ }; mt6397_vgp2_reg: ldo_vgp2 { - regulator-compatible = "ldo_vgp2"; regulator-name = "vcamio"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; @@ -175,7 +157,6 @@ }; mt6397_vgp3_reg: ldo_vgp3 { - regulator-compatible = "ldo_vgp3"; regulator-name = "vcamaf"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -183,7 +164,6 @@ }; mt6397_vgp4_reg: ldo_vgp4 { - regulator-compatible = "ldo_vgp4"; regulator-name = "vgp4"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -191,7 +171,6 @@ }; mt6397_vgp5_reg: ldo_vgp5 { - regulator-compatible = "ldo_vgp5"; regulator-name = "vgp5"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; @@ -199,7 +178,6 @@ }; mt6397_vgp6_reg: ldo_vgp6 { - regulator-compatible = "ldo_vgp6"; regulator-name = "vgp6"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3300000>; @@ -207,7 +185,6 @@ }; mt6397_vibr_reg: ldo_vibr { - regulator-compatible = "ldo_vibr"; regulator-name = "vibr"; regulator-min-microvolt = <1300000>; regulator-max-microvolt = <3300000>; -- cgit v1.2.3-70-g09d2 From 0745c70260dbd763e93230acce92c6be43ba4a55 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sun, 27 Sep 2015 22:28:38 +0200 Subject: ARM: dts: lpc18xx: add rgu node Add the NXP LPC1850 RGU (Reset Generation Unit) reset controller node to the dtsi for all lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 2c569a6ddc9a..29a62b600ae5 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -178,6 +178,14 @@ "base_ssp0_clk", "base_sdio_clk"; }; + rgu: reset-controller@40053000 { + compatible = "nxp,lpc1850-rgu"; + reg = <0x40053000 0x1000>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>; + clock-names = "delay", "reg"; + #reset-cells = <1>; + }; + uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; -- cgit v1.2.3-70-g09d2 From 4f85dd16a52de59f6676bd55db309643c89b8704 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 2 Apr 2015 06:16:33 +0200 Subject: ARM: dts: lpc18xx: add spifi node Add the NXP LPC1773 SPIFI (SPI Flash Interface) flash controller node to the dtsi for all lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 29a62b600ae5..a428a0946be2 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -68,6 +68,17 @@ }; soc { + spifi: flash-controller@40003000 { + compatible = "nxp,lpc1773-spifi"; + reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; + reg-names = "spifi", "flash"; + interrupts = <30>; + clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>; + clock-names = "spifi", "reg"; + resets = <&rgu 53>; + status = "disabled"; + }; + mmcsd: mmcsd@40004000 { compatible = "snps,dw-mshc"; reg = <0x40004000 0x1000>; -- cgit v1.2.3-70-g09d2 From 5924007c7ec807c2dd478ada8db10df6ca519373 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Tue, 26 May 2015 20:59:32 +0200 Subject: ARM: dts: lpc18xx: add dmac node Add the ARM PL080 DMA controller node to the dtsi for all lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index a428a0946be2..5516c3ee8c5a 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -68,6 +68,25 @@ }; soc { + dmac: dma-controller@40002000 { + compatible = "arm,pl080", "arm,primecell"; + arm,primecell-periphid = <0x00041080>; + reg = <0x40002000 0x1000>; + interrupts = <2>; + clocks = <&ccu1 CLK_CPU_DMA>; + clock-names = "apb_pclk"; + resets = <&rgu 19>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <16>; + lli-bus-interface-ahb1; + lli-bus-interface-ahb2; + mem-bus-interface-ahb1; + mem-bus-interface-ahb2; + memcpy-burst-size = <256>; + memcpy-bus-width = <32>; + }; + spifi: flash-controller@40003000 { compatible = "nxp,lpc1773-spifi"; reg = <0x40003000 0x1000>, <0x14000000 0x4000000>; -- cgit v1.2.3-70-g09d2 From 5913f5595e4fba648fd89afe85ad3c6dee0e7ec2 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Wed, 27 May 2015 00:04:20 +0200 Subject: ARM: dts: lpc18xx: add dmamux node Add node for the DMA multiplexer placed in front of the PL080 DMA controller on lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 5516c3ee8c5a..f0d1a099507f 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -171,6 +171,13 @@ clocks = <&ccu1 CLK_USB0>; #phy-cells = <0>; }; + + dmamux: dma-mux@11c { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; + }; }; cgu: clock-controller@40050000 { -- cgit v1.2.3-70-g09d2 From beff1084f1cab155feb3551d72d41ce48af4ae79 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 24 Sep 2015 17:23:53 +0200 Subject: ARM: dts: sun8i: Add sun8i-a33-q8-tablet.dts file This is a generic dts file for A33 based q8 formfactor tablets, this is intended to replace both sun8i-a33-ippo-q8h-v1.2.dts and sun8i-a33-et-q8-v1.6.dts (these can be fully dropped after a transition period). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-a33-q8-tablet.dts | 65 +++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a33-q8-tablet.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 5dbfcb9884af..75d8092af55b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -635,6 +635,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ + sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts new file mode 100644 index 000000000000..44b32296a025 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a33.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A33 Tablet"; + compatible = "allwinner,q8-a33", "allwinner,sun8i-a33"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 9f06c5309a140eab80a4289f08c35c2496c4d1d3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 24 Sep 2015 17:23:54 +0200 Subject: ARM: dts: sun8i: Make ippo-q8h-v1.2.dts a symlink to q8-tablet.dts A33 Q8 tablets with the ippo-q8h-v1.2 pcb will work fine with the generic q8-tablet.dts and given the many variants of PCBs found in Q8 tablets using such a specific dts name was a mistake in hindsight. We cannot just drop the ippo-q8h-v1.2.dtb as existing u-boot configs may very well point to it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts | 66 +-------------------------- 1 file changed, 1 insertion(+), 65 deletions(-) mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts deleted file mode 100644 index b8439cb71003..000000000000 --- a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Ippo Q8H Quad Core Tablet (v1.2)"; - compatible = "ippo,a33-q8h-v1.2", "allwinner,sun8i-a33"; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts new file mode 120000 index 000000000000..4519fd791a8f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-ippo-q8h-v1.2.dts @@ -0,0 +1 @@ +sun8i-a33-q8-tablet.dts \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 6716f6c6b8ae69e2abbea5e9c0c3c274be57d927 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 25 Sep 2015 20:35:32 +0300 Subject: ARM: dts: Fix cpu compatible value for s3c2416 The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy Cc: Kukjin Kim Cc: Krzysztof Kozlowski Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/s3c2416.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index a5184ff56933..80f007550324 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; -- cgit v1.2.3-70-g09d2 From 4e33714eb46dfdb275893a4999b73f9b94e999f2 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 21 Sep 2015 19:58:59 +0200 Subject: ARM: dts: Remove redundant pinctrl settings in exynos4412-odroid The pinctrl settings in i2c_0 and i2c_1 are already provided through the exynos4 dtsi. Signed-off-by: Tobias Jakobi Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 ------ 1 file changed, 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index db52841297a5..10b5a72a8e4f 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -199,8 +199,6 @@ }; &i2c_0 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <400000>; status = "okay"; @@ -424,8 +422,6 @@ }; &i2c_1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_bus>; status = "okay"; max98090: max98090@10 { compatible = "maxim,max98090"; @@ -440,8 +436,6 @@ &i2c_2 { status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_bus>; }; &i2c_8 { -- cgit v1.2.3-70-g09d2 From 00e5e8c47b6fb2da314b0221477b2b84bea0e224 Mon Sep 17 00:00:00 2001 From: Tobias Jakobi Date: Mon, 21 Sep 2015 19:59:00 +0200 Subject: ARM: dts: Unify voltage regulator style in exynos4412-odroid Use 'ldoN_reg: LDON' syntax and drop the deprecated 'regulator-compatible' property. Signed-off-by: Tobias Jakobi Reviewed-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index 10b5a72a8e4f..c3e978d77367 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -274,15 +274,13 @@ regulator-always-on; }; - ldo8_reg: ldo@8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VDD10_HDMI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; }; - ldo10_reg: ldo@10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VDDQ_MIPIHSI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; -- cgit v1.2.3-70-g09d2 From 5b3abbee42562a7bcdc6b589a3d8f9b5752550ed Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Sep 2015 15:36:00 +0200 Subject: ARM: dts: axp209: Add usb_power_supply child node to the ax209 node Add a node representing the usb power supply part of the axp209 pmic, note that the usb power supply and the (to be added later) ac power supply will each have their own child-node, so that they can be separately specified as power-supply for other nodes using a power-supply property with a phandle pointing to the right axp209 child-node. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/axp209.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/axp209.dtsi b/arch/arm/boot/dts/axp209.dtsi index 24c935c72e5e..051ab3ba9a65 100644 --- a/arch/arm/boot/dts/axp209.dtsi +++ b/arch/arm/boot/dts/axp209.dtsi @@ -89,4 +89,9 @@ regulator-name = "ldo5"; }; }; + + usb_power_supply: usb_power_supply { + compatible = "x-powers,axp202-usb-power-supply"; + status = "disabled"; + }; }; -- cgit v1.2.3-70-g09d2 From 3ff427f02dc055fdede6051ba32efbd73f4b1f31 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Sep 2015 15:36:02 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on orangepi-mini Enable the otg/drc usb controller on the orangepi-mini. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts | 29 +++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts index 73cd81ee02e3..4f65664e5dfe 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi-mini.dts @@ -156,7 +156,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -225,6 +236,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -243,7 +258,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 9324ef4b14fe4d16a0f9900bd46f26f0ad44ed91 Mon Sep 17 00:00:00 2001 From: Reinder de Haan Date: Tue, 22 Sep 2015 15:36:03 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on the Orange pi Add usb otg support for Orange pi, based on Orange pi mini. Signed-off-by: Reinder de Haan Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-orangepi.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-orangepi.dts b/arch/arm/boot/dts/sun7i-a20-orangepi.dts index 55a06ceb80ec..71125bf64575 100644 --- a/arch/arm/boot/dts/sun7i-a20-orangepi.dts +++ b/arch/arm/boot/dts/sun7i-a20-orangepi.dts @@ -141,7 +141,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_orangepi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -203,6 +214,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_bananapro>; gpio = <&pio 7 26 GPIO_ACTIVE_HIGH>; /* PH26 */ @@ -221,7 +236,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 47038677e52344135731ea0180bdd981a8ae4fae Mon Sep 17 00:00:00 2001 From: Aleksei Mamlin Date: Tue, 22 Sep 2015 15:36:04 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on Wexler TAB7200 Enable the otg/drc usb controller on the Wexler TAB7200 tablet. Signed-off-by: Aleksei Mamlin Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts | 33 +++++++++++++++++++++++++- 1 file changed, 32 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts index 83c6d3f872ff..78239ad988e7 100644 --- a/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts +++ b/arch/arm/boot/dts/sun7i-a20-wexler-tab7200.dts @@ -86,6 +86,8 @@ }; }; +#include "axp209.dtsi" + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&i2c1_pins_a>; @@ -135,7 +137,18 @@ status = "okay"; }; -#include "axp209.dtsi" +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; ®_dcdc2 { regulator-always-on; @@ -162,6 +175,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -176,7 +193,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From b5cf0022450d2068e56b60cbbd0b5ff1430b7656 Mon Sep 17 00:00:00 2001 From: Jelle de Jong Date: Tue, 22 Sep 2015 15:36:05 +0200 Subject: ARM: dts: sun7i: Add dts file for Wits Pro A20 DKT The Wits Pro A20 DKT is an A20 Development KiT with 1G RAM, 4G NAND, sdio wifi, 1Gbit ethernet, 1024x768 lcd screen with ft5x_ts touchscreen and a ton of IO connectors. Note there seem to be multiple sdcard slots on the board (4 in total), but other then mmc0 none of these are hooked up by default, there is a ton of dip-switches which likely allow hooking some of these up, but the documentation of the board only describes the use of a fraction of them, so for now we only support mmc0. Signed-off-by: Jelle de Jong [hdegoede@redhat.com: Use pwrseq instead of a regulator for the wifi-en pin] [hdegoede@redhat.com: Add support for OOB irq for the sdio wifi] Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts | 226 +++++++++++++++++++++++ 2 files changed, 228 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 75d8092af55b..c7adaa85ef3f 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -626,7 +626,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-orangepi-mini.dtb \ sun7i-a20-pcduino3.dtb \ sun7i-a20-pcduino3-nano.dtb \ - sun7i-a20-wexler-tab7200.dtb + sun7i-a20-wexler-tab7200.dtb \ + sun7i-a20-wits-pro-a20-dkt.dtb dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-evb.dtb \ sun8i-a23-gt90h-v4.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts new file mode 100644 index 000000000000..85b500d8cc4c --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-wits-pro-a20-dkt.dts @@ -0,0 +1,226 @@ +/* + * Copyright 2015 Jelle de Jong + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Wits Pro A20 DKT"; + compatible = "wits,pro-a20-dkt", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_ap6xxx_wl_regon>; + reset-gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; /* PH9 WIFI_EN */ + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +#include "axp209.dtsi" + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&mmc3 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vcc3v3>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <7 10 IRQ_TYPE_LEVEL_LOW>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + vmmc3_pin_ap6xxx_wl_regon: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 97dd823e7e88d6c5a1aaf6dae5ecf5d0c43850ca Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Wed, 8 Jul 2015 16:09:21 +0200 Subject: ARM: mvebu: add CPU config registers in the Armada 370/XP Device Tree This commit adds the description of the CPU config registers in the Armada 370 and Armada XP Device Tree. Since the registers are in fact different between the two SoCs, a different compatible string is used. Note that the Armada 370 node is currently unused, but it is nonetheless added for consistency with the addition on the Armada XP side. Signed-off-by: Thomas Petazzoni Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370.dtsi | 5 +++++ arch/arm/boot/dts/armada-xp.dtsi | 5 +++++ 2 files changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 53a1a5abe147..45eff24764c5 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -256,6 +256,11 @@ reg = <0x20800 0x8>; }; + cpu-config@21000 { + compatible = "marvell,armada-370-cpu-config"; + reg = <0x21000 0x8>; + }; + audio_controller: audio-controller@30000 { #sound-dai-cells = <1>; compatible = "marvell,armada370-audio"; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 3de9b761cc1a..1c64ac34254b 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -184,6 +184,11 @@ reg = <0x20800 0x20>; }; + cpu-config@21000 { + compatible = "marvell,armada-xp-cpu-config"; + reg = <0x21000 0x8>; + }; + eth2: ethernet@30000 { compatible = "marvell,armada-xp-neta"; reg = <0x30000 0x4000>; -- cgit v1.2.3-70-g09d2 From b2ee6b7bd597f567dc40447bb2ca473604ce3b6a Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:52 +0200 Subject: ARM: mvebu: add crypto related nodes to armada-xp.dtsi Add crypto related nodes to armada-xp.dtsi. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 1c64ac34254b..be23196829bb 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -241,6 +241,18 @@ compatible = "marvell,armada-xp-neta"; }; + crypto@90000 { + compatible = "marvell,armada-xp-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>, <49>; + clocks = <&gateclk 23>, <&gateclk 23>; + clock-names = "cesa0", "cesa1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + xor@f0900 { compatible = "marvell,orion-xor"; reg = <0xF0900 0x100 @@ -261,6 +273,24 @@ }; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; clocks { -- cgit v1.2.3-70-g09d2 From 8aa5f09df06f0c3a5a799c5fcf878acaf29db93f Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Wed, 23 Sep 2015 02:47:44 +0200 Subject: ARM: dts: stih407: Enable PWM nodes only board level The PWM may not be used on some boards, so enable them only the board file. Acked-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 6 ++++-- arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index ae0527754000..9975e8feffa6 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -585,7 +585,6 @@ /* COMMS PWM Module */ pwm0: pwm@9810000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9810000 0x68>; pinctrl-names = "default"; @@ -593,12 +592,13 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <1>; + + status = "disabled"; }; /* SBC PWM Module */ pwm1: pwm@9510000 { compatible = "st,sti-pwm"; - status = "okay"; #pwm-cells = <2>; reg = <0x9510000 0x68>; pinctrl-names = "default"; @@ -609,6 +609,8 @@ clock-names = "pwm"; clocks = <&clk_sysin>; st,pwm-num-chan = <4>; + + status = "disabled"; }; }; }; diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index f589fe487f13..ab029f7239b2 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -27,6 +27,14 @@ }; }; + pwm0: pwm@9810000 { + status = "okay"; + }; + + pwm1: pwm@9510000 { + status = "okay"; + }; + i2c@9842000 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 759742d13caa11acf24b0aef7daa8b56f244f231 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Wed, 23 Sep 2015 03:04:24 +0200 Subject: ARM: dts: stih407/410: Tidy up display nodes The display nodes are common to both STiH407 and STiH410, move them to the family file. Acked-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 13 +++++++++++++ arch/arm/boot/dts/stih407.dtsi | 13 ------------- arch/arm/boot/dts/stih410.dtsi | 13 ------------- 3 files changed, 13 insertions(+), 26 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 9975e8feffa6..5b454d962b52 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -152,6 +152,19 @@ ; }; + /* Display */ + vtg_main: sti-vtg-main@8d02800 { + compatible = "st,vtg"; + reg = <0x8d02800 0x200>; + interrupts = ; + }; + + vtg_aux: sti-vtg-aux@8d00200 { + compatible = "st,vtg"; + reg = <0x8d00200 0x100>; + interrupts = ; + }; + serial@9830000 { compatible = "st,asc"; reg = <0x9830000 0x2c>; diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi index 3efa3b2ebe90..98c3468bdca8 100644 --- a/arch/arm/boot/dts/stih407.dtsi +++ b/arch/arm/boot/dts/stih407.dtsi @@ -10,19 +10,6 @@ #include "stih407-family.dtsi" / { soc { - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = ; - }; - - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = ; - }; - sti-display-subsystem { compatible = "st,sti-display-subsystem"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 6f40bc99c22f..23f4a48e207b 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -85,19 +85,6 @@ phy-names = "usb"; }; - /* Display */ - vtg_main: sti-vtg-main@8d02800 { - compatible = "st,vtg"; - reg = <0x8d02800 0x200>; - interrupts = ; - }; - - vtg_aux: sti-vtg-aux@8d00200 { - compatible = "st,vtg"; - reg = <0x8d00200 0x100>; - interrupts = ; - }; - sti-display-subsystem { compatible = "st,sti-display-subsystem"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From c466d997bb160f7c3527f8bb204b1919cbb25259 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:53 +0200 Subject: ARM: mvebu: define crypto SRAM ranges for all armada-xp boards Define the crypto SRAM ranges so that the resources referenced by the sa-sram node can be properly extracted from the DT. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-axpwifiap.dts | 4 +++- arch/arm/boot/dts/armada-xp-db.dts | 4 +++- arch/arm/boot/dts/armada-xp-gp.dts | 4 +++- arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 4 +++- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 4 +++- arch/arm/boot/dts/armada-xp-matrix.dts | 4 +++- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 4 +++- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 4 +++- arch/arm/boot/dts/armada-xp-synology-ds414.dts | 4 +++- 9 files changed, 27 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 60bbfe32bb80..23fc670c0427 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -69,7 +69,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 7dd900f158be..f774101416a5 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -75,7 +75,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index bf724ca96a33..4878d7353069 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -94,7 +94,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x1000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts index 06a6a6c1fdf7..58b500873bfd 100644 --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -64,7 +64,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index fdd187c55aa5..6e9820e141f8 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -69,7 +69,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-matrix.dts b/arch/arm/boot/dts/armada-xp-matrix.dts index f894bc83e957..6ab33837a2b6 100644 --- a/arch/arm/boot/dts/armada-xp-matrix.dts +++ b/arch/arm/boot/dts/armada-xp-matrix.dts @@ -67,7 +67,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 1516fc2627f9..979fae9ec5b6 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -63,7 +63,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 990e8a2100f0..a5db17782e08 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -65,7 +65,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; devbus-bootcs { status = "okay"; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index 20267ad2f61e..2391b11dc546 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -77,7 +77,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0 0xf8100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0 0xf8110000 0x10000>; pcie-controller { status = "okay"; -- cgit v1.2.3-70-g09d2 From 2dbcdb11a6cfde6b54702c7550f5826f46c3c612 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Tue, 22 Sep 2015 11:20:06 +0200 Subject: ARM: mvebu: add crypto related nodes to armada 370 dtsi Add crypto related nodes in armada-370.dtsi. Signed-off-by: Arnaud Ebalard Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370.dtsi | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 45eff24764c5..3b06aa835448 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -324,6 +324,38 @@ ethernet@74000 { compatible = "marvell,armada-370-neta"; }; + + crypto@90000 { + compatible = "marvell,armada-370-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <48>; + clocks = <&gateclk 23>; + clock-names = "cesa0"; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x7e0>; + }; + }; + + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = ; + reg-names = "sram"; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x01) 0 0x800>; + + /* + * The Armada 370 has an erratum preventing the use of + * the standard workflow for CPU idle support (relying + * on the BootROM code to enter/exit idle state). + * Reserve some amount of the crypto SRAM to put the + * cpuidle workaround. + */ + idle-sram@0 { + reg = <0x0 0x20>; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From b416f1926eb6d0f21467b6782c8555af04c46082 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:55 +0200 Subject: ARM: mvebu: define crypto SRAM ranges for all armada-370 boards Define the crypto SRAM ranges so that the resources referenced by the sa-sram node can be properly extracted from the DT. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370-db.dts | 3 ++- arch/arm/boot/dts/armada-370-dlink-dns327l.dts | 3 ++- arch/arm/boot/dts/armada-370-mirabox.dts | 7 ++++++- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 3 ++- arch/arm/boot/dts/armada-370-netgear-rn104.dts | 3 ++- arch/arm/boot/dts/armada-370-rd.dts | 3 ++- arch/arm/boot/dts/armada-370-synology-ds213j.dts | 3 ++- 7 files changed, 18 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 03542f7b5b94..bb280de511da 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -74,7 +74,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { serial@12000 { diff --git a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts index af4dc548c1c0..e2a363b1dd8a 100644 --- a/arch/arm/boot/dts/armada-370-dlink-dns327l.dts +++ b/arch/arm/boot/dts/armada-370-dlink-dns327l.dts @@ -69,7 +69,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 0f40d5da28c3..3aa980ad64f0 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -61,7 +61,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; @@ -138,6 +139,10 @@ phy-mode = "rgmii-id"; }; + crypto@90000 { + status = "okay"; + }; + mvsdio@d4000 { pinctrl-0 = <&sdio_pins3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index a31207860f34..f43ee4a288cc 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -63,7 +63,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 00540f292979..4c240de1d9e1 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -63,7 +63,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index 19475e68b8e9..fbef730e8d37 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -74,7 +74,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; pcie-controller { status = "okay"; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 4f4924362bf0..836bcc07afc5 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -77,7 +77,8 @@ soc { ranges = ; + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; internal-regs { -- cgit v1.2.3-70-g09d2 From 35e5bb58dbf6c7b309387a83ffa04584d669ef8b Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:56 +0200 Subject: ARM: mvebu: add crypto related nodes to armada 375 dtsi Add crypto related nodes in armada-375.dtsi. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-375.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index e9a381741ce1..7ccce7529b0c 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -513,6 +513,21 @@ }; }; + crypto@90000 { + compatible = "marvell,armada-375-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = , + ; + clocks = <&gateclk 30>, <&gateclk 31>, + <&gateclk 28>, <&gateclk 29>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + sata@a0000 { compatible = "marvell,orion-sata"; reg = <0xa0000 0x5000>; @@ -619,5 +634,23 @@ }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 30>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x09) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 31>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x05) 0 0x800>; + }; }; }; -- cgit v1.2.3-70-g09d2 From 9a3ed1332fb93b3573a3f0ae99315e2dcc041967 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:57 +0200 Subject: ARM: mvebu: define crypto SRAM ranges in armada-375-db.dts Define the crypto SRAM ranges so that the resources referenced by the sa-sram node can be properly extracted from the DT. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-375-db.dts | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 5711b97e876c..cded5f0a262d 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -65,7 +65,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { -- cgit v1.2.3-70-g09d2 From b771ae27bc72c7be48993872396c8f1d9a72b12d Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Wed, 23 Sep 2015 19:53:58 +0200 Subject: ARM: dts: stih410: Enable USB2.0 and related PHY nodes at board level A board might not expose the USB2.0 ports, so disable them by default in SoC file, and enable them in b2120 board. Acked-by: Patrice Chotard Acked-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih410-b2120.dts | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/stih410.dtsi | 12 ++++++++++++ 2 files changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 16f02c5e33a4..8af1e73c0532 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -35,5 +35,29 @@ sd-uhs-sdr104; sd-uhs-ddr50; }; + + usb2_picophy1: phy2 { + status = "okay"; + }; + + usb2_picophy2: phy3 { + status = "okay"; + }; + + ohci0: usb@9a03c00 { + status = "okay"; + }; + + ehci0: usb@9a03e00 { + status = "okay"; + }; + + ohci1: usb@9a83c00 { + status = "okay"; + }; + + ehci1: usb@9a83e00 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi index 23f4a48e207b..e3150e38a8e8 100644 --- a/arch/arm/boot/dts/stih410.dtsi +++ b/arch/arm/boot/dts/stih410.dtsi @@ -22,6 +22,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY0_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; usb2_picophy2: phy3 { @@ -31,6 +33,8 @@ resets = <&softreset STIH407_PICOPHY_SOFTRESET>, <&picophyreset STIH407_PICOPHY1_RESET>; reset-names = "global", "port"; + + status = "disabled"; }; ohci0: usb@9a03c00 { @@ -43,6 +47,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ehci0: usb@9a03e00 { @@ -57,6 +63,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy1>; phy-names = "usb"; + + status = "disabled"; }; ohci1: usb@9a83c00 { @@ -69,6 +77,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; + + status = "disabled"; }; ehci1: usb@9a83e00 { @@ -83,6 +93,8 @@ reset-names = "power", "softreset"; phys = <&usb2_picophy2>; phy-names = "usb"; + + status = "disabled"; }; sti-display-subsystem { -- cgit v1.2.3-70-g09d2 From 6c6000c2ccfe69e5d17a2fba91954ce1e6f7df01 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 30 Sep 2015 15:53:55 +0900 Subject: ARM: dts: Add Exynos5250 Snow Rev5+ support on exynos5250-snow-rev5 There are 2 revisions of the Exynos5250 Snow Chromebook that were shipped: Rev4 and Rev5. The only difference between these 2 revisions is the codec, Rev4 has a max98095 codec while Rev5 has a max98090. Mainline only supports Rev4 so this patch moves the common device nodes to a DTSI file and adds a DTS for the Exynos5250 Snow Rev5. The Snow Rev5 DTS is based on the DTS found in the ChromiumOS 3.8 tree. Signed-off-by: Javier Martinez Canillas Tested-by: Mauro Carvalho Chehab Reviewed-by: Douglas Anderson Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5250-snow-common.dtsi | 684 ++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5250-snow-rev5.dts | 47 ++ arch/arm/boot/dts/exynos5250-snow.dts | 671 +------------------------ 4 files changed, 736 insertions(+), 667 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5250-snow-common.dtsi create mode 100644 arch/arm/boot/dts/exynos5250-snow-rev5.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3d27fe34647f..bc6649dcba5c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -115,6 +115,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5250-snow-rev5.dtb \ exynos5250-spring.dtb \ exynos5260-xyref5260.dtb \ exynos5410-smdk5410.dtb \ diff --git a/arch/arm/boot/dts/exynos5250-snow-common.dtsi b/arch/arm/boot/dts/exynos5250-snow-common.dtsi new file mode 100644 index 000000000000..0a7f408824d8 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-common.dtsi @@ -0,0 +1,684 @@ +/* + * Google Snow board device tree source + * + * Copyright (c) 2012 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include "exynos5250.dtsi" + +/ { + aliases { + i2c104 = &i2c_104; + }; + + memory { + reg = <0x40000000 0x80000000>; + }; + + chosen { + bootargs = "console=tty1"; + stdout-path = "serial3:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&power_key_irq &lid_irq>; + + power { + label = "Power"; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + + lid-switch { + label = "Lid"; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; + linux,input-type = <5>; /* EV_SW */ + linux,code = <0>; /* SW_LID */ + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; + + vbat: vbat-fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + }; + + i2c-arbitrator { + compatible = "i2c-arb-gpio-challenge"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@12CA0000}>; + + our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; + their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; + slew-delay-us = <10>; + wait-retry-us = <3000>; + wait-free-us = <50000>; + + pinctrl-names = "default"; + pinctrl-0 = <&arb_our_claim &arb_their_claim>; + + /* Use ID 104 as a hint that we're on physical bus 4 */ + i2c_104: i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + }; + + cros_ec: embedded-controller { + compatible = "google,cros-ec-i2c"; + reg = <0x1e>; + interrupts = <6 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_irq>; + wakeup-source; + }; + + power-regulator { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + dcdc1 { + ti,enable-ext-control; + }; + dcdc2 { + ti,enable-ext-control; + }; + dcdc3 { + ti,enable-ext-control; + }; + fet1: fet1 { + regulator-name = "vcd_led"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet4 { + regulator-name = "sdcard"; + ti,overcurrent-wait = <3>; + }; + fet5 { + regulator-name = "camout"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + fet6: fet6 { + regulator-name = "lcd_vdd"; + ti,overcurrent-wait = <3>; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + ti,overcurrent-wait = <3>; + }; + ldo1 { + }; + ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; + + sound { + samsung,i2s-controller = <&i2s0>; + }; + + usb3_vbus_reg: regulator-usb3 { + compatible = "regulator-fixed"; + regulator-name = "P5.0V_USB3CON"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_vbus_en>; + enable-active-high; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <24000000>; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + power-supply = <&fet1>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; + }; + + panel: panel { + compatible = "auo,b116xw03"; + power-supply = <&fet6>; + backlight = <&backlight>; + + port { + panel_in: endpoint { + remote-endpoint = <&bridge_out>; + }; + }; + }; + + mmc3_pwrseq: mmc3_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ + <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ + clocks = <&max77686 MAX77686_CLK_PMIC>; + clock-names = "ext_clock"; + }; +}; + +&cpu0 { + cpu0-supply = <&buck2_reg>; +}; + +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; + + ports { + port@0 { + dp_out: endpoint { + remote-endpoint = <&bridge_in>; + }; + }; + }; +}; + +&ehci { + samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + phy = <&hdmiphy>; + ddc = <&i2c_2>; + hdmi-en-supply = <&tps65090_fet7>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; +}; + +&i2c_0 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + max77686: max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 IRQ_TYPE_NONE>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + +/* + * Disabled pullups since external part has its own pullups and + * double-pulling gets us out of spec in some cases. + */ +&i2c2_bus { + samsung,pin-pud = <0>; +}; + +&i2c_2 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + hdmiddc@50 { + compatible = "samsung,exynos4210-hdmiddc"; + reg = <0x50>; + }; +}; + +&i2c_3 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_4 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_5 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; +}; + +&i2c_7 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + + ptn3460: lvds-bridge@20 { + compatible = "nxp,ptn3460"; + reg = <0x20>; + powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; + edid-emulation = <5>; + + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + + port@1 { + bridge_in: endpoint { + remote-endpoint = <&dp_out>; + }; + }; + }; + }; +}; + +&i2c_8 { + status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <378000>; + + hdmiphy: hdmiphy@38 { + compatible = "samsung,exynos4212-hdmiphy"; + reg = <0x38>; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&mmc_0 { + status = "okay"; + num-slots = <1>; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; + bus-width = <8>; + cap-mmc-highspeed; +}; + +&mmc_2 { + status = "okay"; + num-slots = <1>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + bus-width = <4>; + wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; + cap-sd-highspeed; +}; + +/* + * On Snow we've got SIP WiFi and so can keep drive strengths low to + * reduce EMI. + */ +&mmc_3 { + status = "okay"; + num-slots = <1>; + broken-cd; + cap-sdio-irq; + keep-power-in-suspend; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; + bus-width = <4>; + cap-sd-highspeed; + mmc-pwrseq = <&mmc3_pwrseq>; +}; + +&pinctrl_0 { + wifi_en: wifi-en { + samsung,pins = "gpx0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + wifi_rst: wifi-rst { + samsung,pins = "gpx0-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-3"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb3_vbus_en: usb3-vbus-en { + samsung,pins = "gpx2-7"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lid_irq: lid-irq { + samsung,pins = "gpx3-5"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; +}; + +&pinctrl_1 { + arb_their_claim: arb-their-claim { + samsung,pins = "gpe0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + arb_our_claim: arb-our-claim { + samsung,pins = "gpf0-3"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +&rtc { + status = "okay"; + clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; + clock-names = "rtc", "rtc_src"; +}; + +&sd3_bus4 { + samsung,pin-drv = <0>; +}; + +&sd3_clk { + samsung,pin-drv = <0>; +}; + +&sd3_cmd { + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; +}; + +&spi_1 { + status = "okay"; + samsung,spi-src-clk = <0>; + num-cs = <1>; + cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; +}; + +&usbdrd_dwc3 { + dr_mode = "host"; +}; + +&usbdrd_phy { + vbus-supply = <&usb3_vbus_reg>; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5250-snow-rev5.dts b/arch/arm/boot/dts/exynos5250-snow-rev5.dts new file mode 100644 index 000000000000..f811dc800660 --- /dev/null +++ b/arch/arm/boot/dts/exynos5250-snow-rev5.dts @@ -0,0 +1,47 @@ +/* + * Google Snow Rev 5+ board device tree source + * + * Copyright (c) 2012 Google, Inc + * Copyright (c) 2015 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include "exynos5250-snow-common.dtsi" + +/ { + model = "Google Snow Rev 5+"; + compatible = "google,snow-rev5", "samsung,exynos5250", + "samsung,exynos5"; + + sound { + compatible = "google,snow-audio-max98090"; + + samsung,model = "Snow-I2S-MAX98090"; + samsung,audio-codec = <&max98090>; + }; +}; + +&i2c_7 { + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <4 IRQ_TYPE_NONE>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; + }; +}; + +&pinctrl_0 { + max98090_irq: max98090-irq { + samsung,pins = "gpx0-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 0720caab5511..995c7ce6c12b 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -9,698 +9,35 @@ */ /dts-v1/; -#include -#include -#include -#include -#include "exynos5250.dtsi" +#include "exynos5250-snow-common.dtsi" / { model = "Google Snow"; - compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5"; - - aliases { - i2c104 = &i2c_104; - }; - - memory { - reg = <0x40000000 0x80000000>; - }; - - chosen { - bootargs = "console=tty1"; - stdout-path = "serial3:115200n8"; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&power_key_irq &lid_irq>; - - power { - label = "Power"; - gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; - linux,code = ; - gpio-key,wakeup; - }; - - lid-switch { - label = "Lid"; - gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; - linux,input-type = <5>; /* EV_SW */ - linux,code = <0>; /* SW_LID */ - debounce-interval = <1>; - gpio-key,wakeup; - }; - }; - - vbat: vbat-fixed-regulator { - compatible = "regulator-fixed"; - regulator-name = "vbat-supply"; - regulator-boot-on; - }; - - i2c-arbitrator { - compatible = "i2c-arb-gpio-challenge"; - #address-cells = <1>; - #size-cells = <0>; - - i2c-parent = <&{/i2c@12CA0000}>; - - our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>; - their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>; - slew-delay-us = <10>; - wait-retry-us = <3000>; - wait-free-us = <50000>; - - pinctrl-names = "default"; - pinctrl-0 = <&arb_our_claim &arb_their_claim>; - - /* Use ID 104 as a hint that we're on physical bus 4 */ - i2c_104: i2c@0 { - reg = <0>; - #address-cells = <1>; - #size-cells = <0>; - - battery: sbs-battery@b { - compatible = "sbs,sbs-battery"; - reg = <0xb>; - sbs,poll-retry-count = <1>; - }; - - cros_ec: embedded-controller { - compatible = "google,cros-ec-i2c"; - reg = <0x1e>; - interrupts = <6 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - pinctrl-names = "default"; - pinctrl-0 = <&ec_irq>; - wakeup-source; - }; - - power-regulator { - compatible = "ti,tps65090"; - reg = <0x48>; - - /* - * Config irq to disable internal pulls - * even though we run in polling mode. - */ - pinctrl-names = "default"; - pinctrl-0 = <&tps65090_irq>; - - vsys1-supply = <&vbat>; - vsys2-supply = <&vbat>; - vsys3-supply = <&vbat>; - infet1-supply = <&vbat>; - infet2-supply = <&vbat>; - infet3-supply = <&vbat>; - infet4-supply = <&vbat>; - infet5-supply = <&vbat>; - infet6-supply = <&vbat>; - infet7-supply = <&vbat>; - vsys-l1-supply = <&vbat>; - vsys-l2-supply = <&vbat>; - - regulators { - dcdc1 { - ti,enable-ext-control; - }; - dcdc2 { - ti,enable-ext-control; - }; - dcdc3 { - ti,enable-ext-control; - }; - fet1: fet1 { - regulator-name = "vcd_led"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet2: fet2 { - regulator-name = "video_mid"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet3 { - regulator-name = "wwan_r"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet4 { - regulator-name = "sdcard"; - ti,overcurrent-wait = <3>; - }; - fet5 { - regulator-name = "camout"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - fet6: fet6 { - regulator-name = "lcd_vdd"; - ti,overcurrent-wait = <3>; - }; - tps65090_fet7: fet7 { - regulator-name = "video_mid_1a"; - regulator-always-on; - ti,overcurrent-wait = <3>; - }; - ldo1 { - }; - ldo2 { - }; - }; - - charger { - compatible = "ti,tps65090-charger"; - }; - }; - }; - }; + compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250", + "samsung,exynos5"; sound { compatible = "google,snow-audio-max98095"; samsung,model = "Snow-I2S-MAX98095"; - samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; - - usb3_vbus_reg: regulator-usb3 { - compatible = "regulator-fixed"; - regulator-name = "P5.0V_USB3CON"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb3_vbus_en>; - enable-active-high; - }; - - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <24000000>; - }; - }; - - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - enable-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; - power-supply = <&fet1>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - }; - - panel: panel { - compatible = "auo,b116xw03"; - power-supply = <&fet6>; - backlight = <&backlight>; - - port { - panel_in: endpoint { - remote-endpoint = <&bridge_out>; - }; - }; - }; - - mmc3_pwrseq: mmc3_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&gpx0 2 GPIO_ACTIVE_LOW>, /* WIFI_RSTn */ - <&gpx0 1 GPIO_ACTIVE_LOW>; /* WIFI_EN */ - clocks = <&max77686 MAX77686_CLK_PMIC>; - clock-names = "ext_clock"; - }; -}; - -&cpu0 { - cpu0-supply = <&buck2_reg>; -}; - -&dp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>; - - ports { - port@0 { - dp_out: endpoint { - remote-endpoint = <&bridge_in>; - }; - }; - }; -}; - -&ehci { - samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; - samsung,invert-vclk; -}; - -&hdmi { - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - phy = <&hdmiphy>; - ddc = <&i2c_2>; - hdmi-en-supply = <&tps65090_fet7>; - vdd-supply = <&ldo8_reg>; - vdd_osc-supply = <&ldo10_reg>; - vdd_pll-supply = <&ldo8_reg>; -}; - -&i2c_0 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - max77686: max77686@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 IRQ_TYPE_NONE>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - wakeup-source; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.8V_LDO_OUT2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "P1.35V_BUCK_OUT6"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "P2.0V_BUCK_OUT7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "P2.85V_BUCK_OUT8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - }; - }; -}; - -&i2c_1 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 IRQ_TYPE_NONE>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; -}; - -/* - * Disabled pullups since external part has its own pullups and - * double-pulling gets us out of spec in some cases. - */ -&i2c2_bus { - samsung,pin-pud = <0>; -}; - -&i2c_2 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - hdmiddc@50 { - compatible = "samsung,exynos4210-hdmiddc"; - reg = <0x50>; - }; -}; - -&i2c_3 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_4 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; -}; - -&i2c_5 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; }; &i2c_7 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - - ptn3460: lvds-bridge@20 { - compatible = "nxp,ptn3460"; - reg = <0x20>; - powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>; - edid-emulation = <5>; - - ports { - port@0 { - bridge_out: endpoint { - remote-endpoint = <&panel_in>; - }; - }; - - port@1 { - bridge_in: endpoint { - remote-endpoint = <&dp_out>; - }; - }; - }; - }; - max98095: codec@11 { compatible = "maxim,max98095"; reg = <0x11>; - pinctrl-0 = <&max98095_en>; pinctrl-names = "default"; + pinctrl-0 = <&max98095_en>; }; }; -&i2c_8 { - status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <378000>; - - hdmiphy: hdmiphy@38 { - compatible = "samsung,exynos4212-hdmiphy"; - reg = <0x38>; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mmc_0 { - status = "okay"; - num-slots = <1>; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>; - bus-width = <8>; - cap-mmc-highspeed; -}; - -&mmc_2 { - status = "okay"; - num-slots = <1>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - bus-width = <4>; - wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>; - cap-sd-highspeed; -}; - -/* - * On Snow we've got SIP WiFi and so can keep drive strengths low to - * reduce EMI. - */ -&mmc_3 { - status = "okay"; - num-slots = <1>; - broken-cd; - cap-sdio-irq; - keep-power-in-suspend; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - pinctrl-names = "default"; - pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4 &wifi_en &wifi_rst>; - bus-width = <4>; - cap-sd-highspeed; - mmc-pwrseq = <&mmc3_pwrseq>; -}; - &pinctrl_0 { - wifi_en: wifi-en { - samsung,pins = "gpx0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - wifi_rst: wifi-rst { - samsung,pins = "gpx0-2"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - power_key_irq: power-key-irq { - samsung,pins = "gpx1-3"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - ec_irq: ec-irq { - samsung,pins = "gpx1-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - max98095_en: max98095-en { samsung,pins = "gpx1-7"; samsung,pin-function = <0>; samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; - - tps65090_irq: tps65090-irq { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - usb3_vbus_en: usb3-vbus-en { - samsung,pins = "gpx2-7"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - lid_irq: lid-irq { - samsung,pins = "gpx3-5"; - samsung,pin-function = <0xf>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; - - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; - }; -}; - -&pinctrl_1 { - arb_their_claim: arb-their-claim { - samsung,pins = "gpe0-4"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; - - arb_our_claim: arb-our-claim { - samsung,pins = "gpf0-3"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; - -&rtc { - status = "okay"; - clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>; - clock-names = "rtc", "rtc_src"; -}; - -&sd3_bus4 { - samsung,pin-drv = <0>; -}; - -&sd3_clk { - samsung,pin-drv = <0>; -}; - -&sd3_cmd { - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; -}; - -&spi_1 { - status = "okay"; - samsung,spi-src-clk = <0>; - num-cs = <1>; - cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>; -}; - -&usbdrd_dwc3 { - dr_mode = "host"; -}; - -&usbdrd_phy { - vbus-supply = <&usb3_vbus_reg>; -}; - -#include "cros-ec-keyboard.dtsi" -- cgit v1.2.3-70-g09d2 From 0f38d5ad1f25594c3ffc1cab33293de2b5fcb3e0 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: STi: DT: STiH407: Add a cec0 pin definition This pin setup provides the correct configuration in order to interact with the CEC HW. Signed-off-by: Erwan Le Ray Signed-off-by: Nicolas Vanhaelewyn Acked-by: Patrice Chotard Acked-by: Lee Jones Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 1683debd0854..30db4538bba8 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -107,6 +107,14 @@ st,retime-pin-mask = <0x3f>; }; + cec0 { + pinctrl_cec0_default: cec0-default { + st,pins { + hdmi_cec = <&pio2 4 ALT1 BIDIR>; + }; + }; + }; + rc { pinctrl_ir: ir0 { st,pins { -- cgit v1.2.3-70-g09d2 From 38fc7859867492f3ee00583acd70ebceff27d1fd Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: STi: DT: STiH407: Add i2c3 alternate pin configs i2c3 controller can use several sets of pins depending on board design. This patch adds the missing alternate pinconfigs. Signed-off-by: Seraphin Bonnaffe Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 30db4538bba8..135920ef2ab1 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -430,12 +430,24 @@ }; i2c3 { - pinctrl_i2c3_default: i2c3-default { + pinctrl_i2c3_default: i2c3-alt1-0 { st,pins { sda = <&pio18 6 ALT1 BIDIR>; scl = <&pio18 5 ALT1 BIDIR>; }; }; + pinctrl_i2c3_alt1_1: i2c3-alt1-1 { + st,pins { + sda = <&pio17 7 ALT1 BIDIR>; + scl = <&pio17 6 ALT1 BIDIR>; + }; + }; + pinctrl_i2c3_alt3_0: i2c3-alt3-0 { + st,pins { + sda = <&pio13 6 ALT3 BIDIR>; + scl = <&pio13 5 ALT3 BIDIR>; + }; + }; }; spi0 { -- cgit v1.2.3-70-g09d2 From 193bb623f22a63524e71c7a8980189d59fa6083c Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add SPI 3 wire and 4 wire pinctrl configs This patch adds the spi pinctrl configurations for all SPI controllers, and also the alternate muxings which can be used depending on board design. Signed-off-by: Christophe Kerello Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 239 ++++++++++++++++++++++++++++++++- 1 file changed, 235 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 135920ef2ab1..2248e440134b 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -262,6 +262,57 @@ }; }; }; + + spi10 { + pinctrl_spi10_default: spi10-4w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 OUT>; + mrst = <&pio4 7 ALT1 IN>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + + pinctrl_spi10_3w_alt1_0: spi10-3w-alt1-0 { + st,pins { + mtsr = <&pio4 6 ALT1 BIDIR_PU>; + scl = <&pio4 5 ALT1 OUT>; + }; + }; + }; + + spi11 { + pinctrl_spi11_default: spi11-4w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 OUT>; + mrst = <&pio3 0 ALT2 IN>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + + pinctrl_spi11_3w_alt2_0: spi11-3w-alt2-0 { + st,pins { + mtsr = <&pio3 1 ALT2 BIDIR_PU>; + scl = <&pio3 2 ALT2 OUT>; + }; + }; + }; + + spi12 { + pinctrl_spi12_default: spi12-4w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 OUT>; + mrst = <&pio3 4 ALT2 IN>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + + pinctrl_spi12_3w_alt2_0: spi12-3w-alt2-0 { + st,pins { + mtsr = <&pio3 6 ALT2 BIDIR_PU>; + scl = <&pio3 7 ALT2 OUT>; + }; + }; + }; }; pin-controller-front0 { @@ -451,11 +502,159 @@ }; spi0 { - pinctrl_spi0_default: spi0-default { + pinctrl_spi0_default: spi0-4w-alt2-0 { + st,pins { + mtsr = <&pio10 6 ALT2 OUT>; + mrst = <&pio10 7 ALT2 IN>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_3w_alt2_0: spi0-3w-alt2-0 { st,pins { - mtsr = <&pio12 6 ALT2 BIDIR>; - mrst = <&pio12 7 ALT2 BIDIR>; - scl = <&pio12 5 ALT2 BIDIR>; + mtsr = <&pio10 6 ALT2 BIDIR_PU>; + scl = <&pio10 5 ALT2 OUT>; + }; + }; + + pinctrl_spi0_4w_alt1_0: spi0-4w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 OUT>; + mrst = <&pio19 5 ALT1 IN>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + + pinctrl_spi0_3w_alt1_0: spi0-3w-alt1-0 { + st,pins { + mtsr = <&pio19 7 ALT1 BIDIR_PU>; + scl = <&pio19 6 ALT1 OUT>; + }; + }; + }; + + spi1 { + pinctrl_spi1_default: spi1-4w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 OUT>; + mrst = <&pio11 2 ALT2 IN>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_3w_alt2_0: spi1-3w-alt2-0 { + st,pins { + mtsr = <&pio11 1 ALT2 BIDIR_PU>; + scl = <&pio11 0 ALT2 OUT>; + }; + }; + + pinctrl_spi1_4w_alt1_0: spi1-4w-alt1-0 { + st,pins { + mtsr = <&pio14 3 ALT1 OUT>; + mrst = <&pio14 4 ALT1 IN>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + + pinctrl_spi1_3w_alt1_0: spi1-3w-alt1-0 { + st,pins { + mtsr = <&pio14 3 ALT1 BIDIR_PU>; + scl = <&pio14 2 ALT1 OUT>; + }; + }; + }; + + spi2 { + pinctrl_spi2_default: spi2-4w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 OUT>; + mrst = <&pio12 7 ALT2 IN>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_0: spi2-3w-alt2-0 { + st,pins { + mtsr = <&pio12 6 ALT2 BIDIR_PU>; + scl = <&pio12 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_4w_alt1_0: spi2-4w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 OUT>; + mrst = <&pio14 7 ALT1 IN>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_3w_alt1_0: spi2-3w-alt1-0 { + st,pins { + mtsr = <&pio14 6 ALT1 BIDIR_PU>; + scl = <&pio14 5 ALT1 OUT>; + }; + }; + + pinctrl_spi2_4w_alt2_1: spi2-4w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 OUT>; + mrst = <&pio15 7 ALT2 IN>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + + pinctrl_spi2_3w_alt2_1: spi2-3w-alt2-1 { + st,pins { + mtsr = <&pio15 6 ALT2 BIDIR_PU>; + scl = <&pio15 5 ALT2 OUT>; + }; + }; + }; + + spi3 { + pinctrl_spi3_default: spi3-4w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 OUT>; + mrst = <&pio13 7 ALT3 IN>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_3w_alt3_0: spi3-3w-alt3-0 { + st,pins { + mtsr = <&pio13 6 ALT3 BIDIR_PU>; + scl = <&pio13 5 ALT3 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_0: spi3-4w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 OUT>; + mrst = <&pio17 5 ALT1 IN>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_0: spi3-3w-alt1-0 { + st,pins { + mtsr = <&pio17 7 ALT1 BIDIR_PU>; + scl = <&pio17 6 ALT1 OUT>; + }; + }; + + pinctrl_spi3_4w_alt1_1: spi3-4w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 OUT>; + mrst = <&pio18 7 ALT1 IN>; + scl = <&pio18 5 ALT1 OUT>; + }; + }; + + pinctrl_spi3_3w_alt1_1: spi3-3w-alt1-1 { + st,pins { + mtsr = <&pio18 6 ALT1 BIDIR_PU>; + scl = <&pio18 5 ALT1 OUT>; }; }; }; @@ -778,6 +977,38 @@ }; }; }; + + spi4 { + pinctrl_spi4_default: spi4-4w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 OUT>; + mrst = <&pio30 2 ALT1 IN>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_3w_alt1_0: spi4-3w-alt1-0 { + st,pins { + mtsr = <&pio30 1 ALT1 BIDIR_PU>; + scl = <&pio30 0 ALT1 OUT>; + }; + }; + + pinctrl_spi4_4w_alt3_0: spi4-4w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 OUT>; + mrst = <&pio34 2 ALT3 IN>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + + pinctrl_spi4_3w_alt3_0: spi4-3w-alt3-0 { + st,pins { + mtsr = <&pio34 1 ALT3 BIDIR_PU>; + scl = <&pio34 0 ALT3 OUT>; + }; + }; + }; }; pin-controller-flash { -- cgit v1.2.3-70-g09d2 From d8036479848b997094b5bd32aa96f61960d3f0db Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add serial3 pinctrl configuration Add missing serial 3 pinctrl config. This can be used on b2206 HVK, where it defaults to PIO31[3] & PIO31[4], alternate 1. Signed-off-by: Erwan Le Ray Signed-off-by: Fabrice Gasnier Acked-by: Carmelo Amoroso Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 2248e440134b..5d725fe7bbfc 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -1009,6 +1009,15 @@ }; }; }; + + serial3 { + pinctrl_serial3: serial3-0 { + st,pins { + tx = <&pio31 3 ALT1 OUT>; + rx = <&pio31 4 ALT1 IN>; + }; + }; + }; }; pin-controller-flash { -- cgit v1.2.3-70-g09d2 From 9af0a7b5e6cbf1a67258dd5eca03b4403640a355 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add SPI FSM (NOR Flash) Controller pin config This patch adds the pin configuration for the NOR flash controller. Signed-off-by: Christophe Kerello Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 5d725fe7bbfc..b7a405f49b69 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -1072,6 +1072,19 @@ }; }; }; + + fsm { + pinctrl_fsm: fsm { + st,pins { + spi-fsm-clk = <&pio40 1 ALT1 OUT>; + spi-fsm-cs = <&pio40 0 ALT1 OUT>; + spi-fsm-mosi = <&pio40 2 ALT1 OUT>; + spi-fsm-miso = <&pio40 3 ALT1 IN>; + spi-fsm-hol = <&pio40 5 ALT1 OUT>; + spi-fsm-wp = <&pio40 4 ALT1 OUT>; + }; + }; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 8eefa90f3c808af200c041274a8268e20fbedbf7 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add NAND flash controller pin configuration This patch adds NAND flash support controller pin configuration for STiH407 family silicon. Signed-off-by: Christophe Kerello Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index b7a405f49b69..d281f9cfc83f 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -1085,6 +1085,29 @@ }; }; }; + + nand { + pinctrl_nand: nand { + st,pins { + nand_cs1 = <&pio40 6 ALT3 OUT>; + nand_cs0 = <&pio40 7 ALT3 OUT>; + nand_d0 = <&pio41 0 ALT3 BIDIR>; + nand_d1 = <&pio41 1 ALT3 BIDIR>; + nand_d2 = <&pio41 2 ALT3 BIDIR>; + nand_d3 = <&pio41 3 ALT3 BIDIR>; + nand_d4 = <&pio41 4 ALT3 BIDIR>; + nand_d5 = <&pio41 5 ALT3 BIDIR>; + nand_d6 = <&pio41 6 ALT3 BIDIR>; + nand_d7 = <&pio41 7 ALT3 BIDIR>; + nand_we = <&pio42 0 ALT3 OUT>; + nand_dqs = <&pio42 1 ALT3 OUT>; + nand_ale = <&pio42 2 ALT3 OUT>; + nand_cle = <&pio42 3 ALT3 OUT>; + nand_rnb = <&pio42 4 ALT3 IN>; + nand_oe = <&pio42 5 ALT3 OUT>; + }; + }; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 0e60262814da699ccc6cb5e1880da88ed25c28fe Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add systrace pin configuration This patch adds the pin config for systrace for STiH407 family silicon. Signed-off-by: Fabrice Gasnier Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index d281f9cfc83f..7a1bd428898e 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -846,6 +846,18 @@ }; }; }; + + systrace { + pinctrl_systrace_default: systrace-default { + st,pins { + trc_data0 = <&pio11 3 ALT5 OUT>; + trc_data1 = <&pio11 4 ALT5 OUT>; + trc_data2 = <&pio11 5 ALT5 OUT>; + trc_data3 = <&pio11 6 ALT5 OUT>; + trc_clk = <&pio11 7 ALT5 OUT>; + }; + }; + }; }; pin-controller-front1 { -- cgit v1.2.3-70-g09d2 From fab876695a1ac2f55ed86dce5ec18db35f08a0bb Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add SD pinctrl config for mmc0 controller This patch adds the missing SD pinctrl config for mmc/sd controller 0. This is required to enable the B2144A daughter board that exposes this controller as a sd slot. Signed-off-by: Nebil BEN MEFTEH Acked-by: Giuseppe Cavallaro Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 7a1bd428898e..352fe98535f5 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -1083,6 +1083,21 @@ emmc_d7 = <&pio41 7 ALT1 BIDIR_PU>; }; }; + pinctrl_sd0: sd0-0 { + st,pins { + sd_clk = <&pio40 6 ALT1 BIDIR>; + sd_cmd = <&pio40 7 ALT1 BIDIR_PU>; + sd_dat0 = <&pio41 0 ALT1 BIDIR_PU>; + sd_dat1 = <&pio41 1 ALT1 BIDIR_PU>; + sd_dat2 = <&pio41 2 ALT1 BIDIR_PU>; + sd_dat3 = <&pio41 3 ALT1 BIDIR_PU>; + sd_led = <&pio42 0 ALT2 OUT>; + sd_pwren = <&pio42 2 ALT2 OUT>; + sd_vsel = <&pio42 3 ALT2 OUT>; + sd_cd = <&pio42 4 ALT2 IN>; + sd_wp = <&pio42 5 ALT2 IN>; + }; + }; }; fsm { -- cgit v1.2.3-70-g09d2 From 0252d86366538eb7e65e35733eb1c0260410f720 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add pinconfig for IRB UHF and IRB TX This patch adds the pinconfig for IRB TX and IRB UHF. Signed-off-by: M'boumba Cedric Madianga Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 352fe98535f5..9daab1f3dc81 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -121,6 +121,24 @@ ir = <&pio4 0 ALT2 IN>; }; }; + + pinctrl_uhf: uhf0 { + st,pins { + ir = <&pio4 1 ALT2 IN>; + }; + }; + + pinctrl_tx: tx0 { + st,pins { + tx = <&pio4 2 ALT2 OUT>; + }; + }; + + pinctrl_tx_od: tx_od0 { + st,pins { + tx_od = <&pio4 3 ALT2 OUT>; + }; + }; }; /* SBC_ASC0 - UART10 */ -- cgit v1.2.3-70-g09d2 From 9d6d736bfe6c65ec6ca42dc0f36baf9c18eae7d6 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: DT: STiH407: Add RMII pinctrl support This patch adds the RMII pinctrl support for the Synopsys MAC on STiH407 SoCs. Signed-off-by: Giuseppe Cavallaro Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 9daab1f3dc81..881e94a16fee 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -256,6 +256,33 @@ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; }; }; + + pinctrl_rmii1: rmii1-0 { + st,pins { + txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>; + mdio = <&pio1 0 ALT1 OUT BYPASS 0>; + mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>; + mdint = <&pio1 3 ALT1 IN BYPASS 0>; + rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_B>; + rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk: rmii1_phyclk { + st,pins { + phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>; + }; + }; + + pinctrl_rmii1_phyclk_ext: rmii1_phyclk_ext { + st,pins { + phyclk = <&pio2 3 ALT2 IN NICLK 0 CLK_A>; + }; + }; }; pwm1 { -- cgit v1.2.3-70-g09d2 From 55fd9b184cb6339f51adc9e27e6900bb431a7d18 Mon Sep 17 00:00:00 2001 From: Peter Griffin Date: Mon, 28 Sep 2015 14:37:00 +0200 Subject: ARM: STi: STiH407: Add spi default pinctrl groups. Now we have default pinconfig groups for each SPI controller ensure it is used by the SPI controller node. Acked-by: Lee Jones Acked-by: Patrice Chotard Signed-off-by: Peter Griffin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 5b454d962b52..1138eea5ab17 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -409,6 +409,8 @@ interrupts = ; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; status = "disabled"; }; @@ -419,6 +421,8 @@ interrupts = ; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2_default>; status = "disabled"; }; @@ -429,6 +433,8 @@ interrupts = ; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi3_default>; status = "disabled"; }; @@ -439,6 +445,8 @@ interrupts = ; clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi4_default>; status = "disabled"; }; @@ -450,6 +458,8 @@ interrupts = ; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi10_default>; status = "disabled"; }; @@ -460,6 +470,8 @@ interrupts = ; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi11_default>; status = "disabled"; }; @@ -470,6 +482,8 @@ interrupts = ; clocks = <&clk_sysin>; clock-names = "ssc"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi12_default>; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From a6a130b34f84b51ecce711c266d434c02a6b53fe Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 13 Sep 2015 01:30:05 +0300 Subject: ARM: shmobile: r8a7794: add internal PCI bridge nodes Add device nodes for the R8A7794 internal PCI bridge devices. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 42 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 42 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index e54f3dea2d70..a0747d749bb1 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -648,6 +648,48 @@ status = "disabled"; }; + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7794"; + device_type = "pci"; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_EHCI>; + power-domains = <&cpg_clocks>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From f409ed0f4915c00e93ca21d1aea24e9aa2dedaf2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 13 Sep 2015 01:32:12 +0300 Subject: ARM: shmobile: silk: enable internal PCI Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index bb0a22423dc4..71bb56fef7e5 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -80,6 +80,16 @@ renesas,groups = "vin0_data8", "vin0_clk"; renesas,function = "vin0"; }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; &scif2 { @@ -188,3 +198,15 @@ }; }; }; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; -- cgit v1.2.3-70-g09d2 From 2bb1441f97ac9765e8d558a1ee726a21e1df5fbe Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Tue, 29 Sep 2015 10:52:00 +0200 Subject: ARM: STi: DT: STiH407: Rename incorrect interrupt related binding interrupts-names => interrupt-names Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 881e94a16fee..8fe542aa1fa4 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -53,7 +53,7 @@ reg = <0x0961f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; pio0: gpio@09610000 { @@ -368,7 +368,7 @@ reg = <0x0920f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09200000 0x10000>; pio10: pio@09200000 { @@ -913,7 +913,7 @@ reg = <0x0921f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09210000 0x10000>; tsin4 { @@ -946,7 +946,7 @@ reg = <0x0922f080 0x4>; reg-names = "irqmux"; interrupts = ; - interrupts-names = "irqmux"; + interrupt-names = "irqmux"; ranges = <0 0x09220000 0x6000>; pio30: gpio@09220000 { -- cgit v1.2.3-70-g09d2 From 82c05810b2ef6149368b0b2db205c24a832547ad Mon Sep 17 00:00:00 2001 From: Gabriel Fernandez Date: Mon, 24 Aug 2015 16:23:00 +0200 Subject: ARM: DT: STi: STiH418: Fix mmc0 clock configuration This patch configure correctly the MMC-0 clock for STiH418 platform. Signed-off-by: Gabriel Fernandez Acked-by: Maxime Coquelin Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih418.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi index 8160a75539a4..965f88160718 100644 --- a/arch/arm/boot/dts/stih418.dtsi +++ b/arch/arm/boot/dts/stih418.dtsi @@ -99,5 +99,11 @@ phys = <&usb2_picophy2>; phy-names = "usb"; }; + + mmc0: sdhci@09060000 { + assigned-clocks = <&clk_s_c0_flexgen CLK_MMC_0>; + assigned-clock-parents = <&clk_s_c0_pll1 0>; + assigned-clock-rates = <200000000>; + }; }; }; -- cgit v1.2.3-70-g09d2 From c5288091b07914d57dbc03f516b23eb337c34869 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Wed, 30 Sep 2015 22:29:29 +0200 Subject: ARM: dts: lpc18xx: add dma to ssp0/1 Add dmas entries to the two SSP peripherals on LPC18xx/43xx devices so that DMA can be used to transfer data. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index f0d1a099507f..5b7ca7066161 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -249,6 +249,9 @@ interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; + dmas = <&dmamux 9 0 2 + &dmamux 10 0 2>; + dma-names = "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -326,6 +329,16 @@ interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; + dmas = <&dmamux 11 2 2 + &dmamux 12 2 2 + &dmamux 3 3 2 + &dmamux 4 3 2 + &dmamux 5 2 2 + &dmamux 6 2 2 + &dmamux 13 2 2 + &dmamux 14 2 2>; + dma-names = "rx", "tx", "tx", "rx", + "tx", "rx", "rx", "tx"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 4e9c5aa8dbe33e8816c686aa154015dcb44afbbf Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Wed, 30 Sep 2015 22:35:37 +0200 Subject: ARM: dts: lpc18xx: add dma to uart0/1/2/3 Add dmas entries to the four UART peripherals on LPC18xx/43xx devices so that DMA can be used to transfer data. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 5b7ca7066161..f97feea5f5da 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -230,6 +230,11 @@ interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; + dmas = <&dmamux 1 1 2 + &dmamux 2 1 2 + &dmamux 11 2 2 + &dmamux 12 2 2>; + dma-names = "tx", "rx", "tx", "rx"; status = "disabled"; }; @@ -240,6 +245,9 @@ interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; + dmas = <&dmamux 3 1 2 + &dmamux 4 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -294,6 +302,9 @@ interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; + dmas = <&dmamux 5 1 2 + &dmamux 6 1 2>; + dma-names = "tx", "rx"; status = "disabled"; }; @@ -304,6 +315,11 @@ interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; + dmas = <&dmamux 7 1 2 + &dmamux 8 1 2 + &dmamux 13 3 2 + &dmamux 14 3 2>; + dma-names = "tx", "rx", "rx", "tx"; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From 06713a943253cfa47b6b76c39ead3c666a7b9119 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 2 Apr 2015 05:20:45 +0200 Subject: ARM: dts: lpc18xx: add i2c nodes Add NXP LPC1778 I2C controller nodes to the dtsi for all lpc18xx/43xx devices. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index f97feea5f5da..04bea2dc0e66 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -287,6 +287,17 @@ clocks = <&ccu1 CLK_CPU_SCU>; }; + i2c0: i2c@400a1000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400a1000 0x1000>; + interrupts = <18>; + clocks = <&ccu1 CLK_APB1_I2C0>; + resets = <&rgu 48>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + can1: can@400a4000 { compatible = "bosch,c_can"; reg = <0x400a4000 0x1000>; @@ -360,6 +371,17 @@ status = "disabled"; }; + i2c1: i2c@400e0000 { + compatible = "nxp,lpc1788-i2c"; + reg = <0x400e0000 0x1000>; + interrupts = <19>; + clocks = <&ccu1 CLK_APB3_I2C1>; + resets = <&rgu 49>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + can0: can@400e2000 { compatible = "bosch,c_can"; reg = <0x400e2000 0x1000>; -- cgit v1.2.3-70-g09d2 From 9c8a5cdcee682013c4e69b5354e4f4e3acf30487 Mon Sep 17 00:00:00 2001 From: Ariel D'Alessandro Date: Thu, 17 Sep 2015 18:11:41 +0200 Subject: ARM: dts: lpc18xx: add watchdog node Add node for the watchdog timer found on LPC18xx/LPC43xx. Signed-off-by: Ariel D'Alessandro Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 04bea2dc0e66..4ea82536a8a0 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -223,6 +223,14 @@ #reset-cells = <1>; }; + watchdog@40080000 { + compatible = "nxp,lpc1850-wwdt"; + reg = <0x40080000 0x24>; + interrupts = <49>; + clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_WWDT>; + clock-names = "wdtclk", "reg"; + }; + uart0: serial@40081000 { compatible = "nxp,lpc1850-uart", "ns16550a"; reg = <0x40081000 0x1000>; -- cgit v1.2.3-70-g09d2 From b8da65d1088e71466eb80181d307f2fb2b36eb58 Mon Sep 17 00:00:00 2001 From: Ariel D'Alessandro Date: Thu, 17 Sep 2015 18:15:37 +0200 Subject: ARM: dts: lpc18xx: add sct pwm node NXP LPC SoCs family, which includes LPC18xx/LPC43xx, provides a State Configurable Timer (SCT) which can be configured as a Pulse Width Modulator. Signed-off-by: Ariel D'Alessandro Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 4ea82536a8a0..19c6f2951129 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -68,6 +68,16 @@ }; soc { + sct_pwm: pwm@40000000 { + compatible = "nxp,lpc1850-sct-pwm"; + reg = <0x40000000 0x1000>; + clocks =<&ccu1 CLK_CPU_SCT>; + clock-names = "pwm"; + resets = <&rgu 37>; + #pwm-cells = <3>; + status = "disabled"; + }; + dmac: dma-controller@40002000 { compatible = "arm,pl080", "arm,primecell"; arm,primecell-periphid = <0x00041080>; -- cgit v1.2.3-70-g09d2 From 2300830fe71c7652e6cefdfadaf479e81c8bc293 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sat, 11 Jul 2015 11:34:21 +0200 Subject: ARM: dts: lpc18xx: add resets entry to device nodes Most of the peripherals on LPC18xx/43xx devices have their reset lines hooked up to internal reset controller (RGU). Add reset entries to the device nodes so a driver can use the reset line. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc18xx.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi index 19c6f2951129..52591d83e8cd 100644 --- a/arch/arm/boot/dts/lpc18xx.dtsi +++ b/arch/arm/boot/dts/lpc18xx.dtsi @@ -115,6 +115,7 @@ num-slots = <1>; clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>; clock-names = "ciu", "biu"; + resets = <&rgu 20>; status = "disabled"; }; @@ -123,6 +124,7 @@ reg = <0x40006100 0x100>; interrupts = <8>; clocks = <&ccu1 CLK_CPU_USB0>; + resets = <&rgu 17>; phys = <&usb0_otg_phy>; phy-names = "usb"; has-transaction-translator; @@ -134,6 +136,7 @@ reg = <0x40007100 0x100>; interrupts = <9>; clocks = <&ccu1 CLK_CPU_USB1>; + resets = <&rgu 18>; status = "disabled"; }; @@ -142,6 +145,7 @@ reg = <0x40005000 0x1000>; clocks = <&ccu1 CLK_CPU_EMCDIV>, <&ccu1 CLK_CPU_EMC>; clock-names = "mpmcclk", "apb_pclk"; + resets = <&rgu 21>; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0x1c000000 0x1000000 @@ -158,6 +162,7 @@ interrupt-names = "combined"; clocks = <&cgu BASE_LCD_CLK>, <&ccu1 CLK_CPU_LCD>; clock-names = "clcdclk", "apb_pclk"; + resets = <&rgu 16>; status = "disabled"; }; @@ -168,6 +173,8 @@ interrupt-names = "macirq"; clocks = <&ccu1 CLK_CPU_ETHERNET>; clock-names = "stmmaceth"; + resets = <&rgu 22>; + reset-names = "stmmaceth"; status = "disabled"; }; @@ -175,6 +182,7 @@ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; reg = <0x40043000 0x1000>; clocks = <&ccu1 CLK_CPU_CREG>; + resets = <&rgu 5>; usb0_otg_phy: phy@004 { compatible = "nxp,lpc1850-usb-otg-phy"; @@ -248,6 +256,7 @@ interrupts = <24>; clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; clock-names = "uartclk", "reg"; + resets = <&rgu 44>; dmas = <&dmamux 1 1 2 &dmamux 2 1 2 &dmamux 11 2 2 @@ -263,6 +272,7 @@ interrupts = <25>; clocks = <&ccu2 CLK_APB0_UART1>, <&ccu1 CLK_CPU_UART1>; clock-names = "uartclk", "reg"; + resets = <&rgu 45>; dmas = <&dmamux 3 1 2 &dmamux 4 1 2>; dma-names = "tx", "rx"; @@ -275,6 +285,7 @@ interrupts = <22>; clocks = <&ccu2 CLK_APB0_SSP0>, <&ccu1 CLK_CPU_SSP0>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 50>; dmas = <&dmamux 9 0 2 &dmamux 10 0 2>; dma-names = "rx", "tx"; @@ -289,6 +300,7 @@ interrupts = <12>; clocks = <&ccu1 CLK_CPU_TIMER0>; clock-names = "timerclk"; + resets = <&rgu 32>; }; timer1: timer@40085000 { @@ -297,6 +309,7 @@ interrupts = <13>; clocks = <&ccu1 CLK_CPU_TIMER1>; clock-names = "timerclk"; + resets = <&rgu 33>; }; pinctrl: pinctrl@40086000 { @@ -321,6 +334,7 @@ reg = <0x400a4000 0x1000>; interrupts = <43>; clocks = <&ccu1 CLK_APB1_CAN1>; + resets = <&rgu 54>; status = "disabled"; }; @@ -331,6 +345,7 @@ interrupts = <26>; clocks = <&ccu2 CLK_APB2_UART2>, <&ccu1 CLK_CPU_UART2>; clock-names = "uartclk", "reg"; + resets = <&rgu 46>; dmas = <&dmamux 5 1 2 &dmamux 6 1 2>; dma-names = "tx", "rx"; @@ -344,6 +359,7 @@ interrupts = <27>; clocks = <&ccu2 CLK_APB2_UART3>, <&ccu1 CLK_CPU_UART3>; clock-names = "uartclk", "reg"; + resets = <&rgu 47>; dmas = <&dmamux 7 1 2 &dmamux 8 1 2 &dmamux 13 3 2 @@ -358,6 +374,7 @@ interrupts = <14>; clocks = <&ccu1 CLK_CPU_TIMER2>; clock-names = "timerclk"; + resets = <&rgu 34>; }; timer3: timer@400c4000 { @@ -366,6 +383,7 @@ interrupts = <15>; clocks = <&ccu1 CLK_CPU_TIMER3>; clock-names = "timerclk"; + resets = <&rgu 35>; }; ssp1: spi@400c5000 { @@ -374,6 +392,7 @@ interrupts = <23>; clocks = <&ccu2 CLK_APB2_SSP1>, <&ccu1 CLK_CPU_SSP1>; clock-names = "sspclk", "apb_pclk"; + resets = <&rgu 51>; dmas = <&dmamux 11 2 2 &dmamux 12 2 2 &dmamux 3 3 2 @@ -405,6 +424,7 @@ reg = <0x400e2000 0x1000>; interrupts = <51>; clocks = <&ccu1 CLK_APB3_CAN0>; + resets = <&rgu 55>; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From f359348b1beaff0cd1f790d74c3c156f0bef98e6 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sat, 20 Jun 2015 15:25:13 +0200 Subject: ARM: dts: lpc4357-ea4357: add spifi and flash device The EA4357 dev kit has a Spansion S25FL016K SPI-NOR Flash connected to the SPIFI perherial. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 46 +++++++++++++++++++++++++++++ 1 file changed, 46 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 5f7bdad80963..9fcc0f357c2d 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -363,6 +363,32 @@ }; }; + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <0>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + bias-disable; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -489,6 +515,26 @@ pinctrl-0 = <&sdmmc_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-cpol; + spi-cpha; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "data"; + reg = <0 0x200000>; + }; + }; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From 09d039971b993225e1677d3f5935adeec5e75fd2 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Sat, 30 May 2015 19:31:25 +0200 Subject: ARM: dts: lpc4357-ea4357: add ssp0 The SSP0 can be found on the EA4357 Dev Kit on J15 pin 3-6. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 9fcc0f357c2d..4d2d74a064c4 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -389,6 +389,23 @@ }; }; + ssp0_pins: ssp0-pins { + ssp0_sck_miso_mosi { + pins = "pf_0", "pf_2", "pf_3"; + function = "ssp0"; + slew-rate = <1>; + bias-pull-down; + input-enable; + input-schmitt-disable; + }; + + ssp0_ssel { + pins = "pf_1"; + function = "ssp0"; + bias-pull-up; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -535,6 +552,13 @@ }; }; +&ssp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_pins>; + num-cs = <1>; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From 7eef5587688c5e16204740b8ecf48a1c73632e23 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 2 Apr 2015 05:59:28 +0200 Subject: ARM: dts: lpc4357-ea4357: add i2c0 and devices Add I2C0 and some of the I2C devices on the EA4357 dev kit. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4357-ea4357-devkit.dts | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts index 4d2d74a064c4..391121d24daa 100644 --- a/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts +++ b/arch/arm/boot/dts/lpc4357-ea4357-devkit.dts @@ -332,6 +332,14 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + sdmmc_pins: sdmmc-pins { sdmmc_clk_cfg { pins = "pc_0"; @@ -453,6 +461,23 @@ }; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + lm75@48 { + compatible = "nxp,lm75"; + reg = <0x48>; + }; + + eeprom@57 { + compatible = "microchip,24c64"; + reg = <0x57>; + }; +}; + &emc { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From 474ae43004ef3646aa424f513d7d84017f844151 Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 30 Jul 2015 01:48:17 +0200 Subject: ARM: dts: lpc4350-hitex-eval: add spifi and flash device The Hitex LPC4350 eval board has a Spansion S25SL064P SPI-NOR Flash connected to the SPIFI perherial. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4350-hitex-eval.dts | 57 ++++++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 32bc7ff4eb2a..c1dd76e5fc45 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -186,6 +186,35 @@ }; }; + spifi_pins: spifi-pins { + spifi_clk_cfg { + pins = "p3_3"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_mosi_miso_sio2_3_cfg { + pins = "p3_7", "p3_6", "p3_5", "p3_4"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + + spifi_cs_cfg { + pins = "p3_8"; + function = "spifi"; + slew-rate = <1>; + bias-disable; + input-enable; + input-schmitt-disable; + }; + }; + uart0_pins: uart0-pins { uart0_rx_cfg { pins = "pf_11"; @@ -278,6 +307,34 @@ pinctrl-0 = <&enet_mii_pins>; }; +&spifi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spifi_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "bootloader"; + reg = <0x000000 0x040000>; /* 256 KiB */ + }; + + partition@1 { + label = "kernel"; + reg = <0x040000 0x2c0000>; /* 2.75 MiB */ + }; + + partition@2 { + label = "rootfs"; + reg = <0x300000 0x500000>; /* 5 MiB */ + }; + }; +}; + &uart0 { status = "okay"; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From 67b17a116fa4662b91f982f51c45ce3d8519d2af Mon Sep 17 00:00:00 2001 From: Ariel D'Alessandro Date: Mon, 20 Jul 2015 14:50:56 +0200 Subject: ARM: dts: lpc4350-hitex-eval: add i2c0 and devices Add the I2C0 bus and the some of the I2C devices on the Hitex LPC4350 eval board. Signed-off-by: Ariel D'Alessandro Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4350-hitex-eval.dts | 33 ++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index c1dd76e5fc45..5c529f45947b 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -186,6 +186,14 @@ }; }; + i2c0_pins: i2c0-pins { + i2c0_pins_cfg { + pins = "i2c0_scl", "i2c0_sda"; + function = "i2c0"; + input-enable; + }; + }; + spifi_pins: spifi-pins { spifi_clk_cfg { pins = "p3_3"; @@ -300,6 +308,31 @@ clock-frequency = <25000000>; }; +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + /* NXP SE97BTP with temperature sensor + eeprom */ + sensor@18 { + compatible = "nxp,jc42"; + reg = <0x18>; + }; + + eeprom@50 { + compatible = "nxp,24c02"; + reg = <0x50>; + }; + + pca_gpio: gpio@24 { + compatible = "nxp,pca9673"; + reg = <0x24>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &mac { status = "okay"; phy-mode = "mii"; -- cgit v1.2.3-70-g09d2 From 6031d8bbf29e7bdb22d69dc4dd7b2ad7a402e57a Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Mon, 20 Jul 2015 18:59:21 +0200 Subject: ARM: dts: lpc4350-hitex-eval: add joystick, buttons and leds Add the joystick, buttons and LEDs connected to the I2C I/O expander. Signed-off-by: Joachim Eastwood --- arch/arm/boot/dts/lpc4350-hitex-eval.dts | 85 ++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/lpc4350-hitex-eval.dts index 5c529f45947b..022d495432c1 100644 --- a/arch/arm/boot/dts/lpc4350-hitex-eval.dts +++ b/arch/arm/boot/dts/lpc4350-hitex-eval.dts @@ -15,6 +15,9 @@ #include "lpc18xx.dtsi" #include "lpc4350.dtsi" +#include "dt-bindings/input/input.h" +#include "dt-bindings/gpio/gpio.h" + / { model = "Hitex LPC4350 Evaluation Board"; compatible = "hitex,lpc4350-eval-board", "nxp,lpc4350"; @@ -34,6 +37,88 @@ device_type = "memory"; reg = <0x28000000 0x800000>; /* 8 MB */ }; + + pca_buttons { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + + button@0 { + label = "joy:right"; + linux,code = ; + gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>; + }; + + button@1 { + label = "joy:up"; + linux,code = ; + gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>; + }; + + + button@2 { + label = "joy:enter"; + linux,code = ; + gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>; + }; + + button@3 { + label = "joy:left"; + linux,code = ; + gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>; + }; + + button@4 { + label = "joy:down"; + linux,code = ; + gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>; + }; + + button@5 { + label = "user:sw3"; + linux,code = ; + gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>; + }; + + button@6 { + label = "user:sw4"; + linux,code = ; + gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>; + }; + + button@7 { + label = "user:sw5"; + linux,code = ; + gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>; + }; + }; + + pca_leds { + compatible = "gpio-leds"; + + led0 { + label = "ext:led0"; + gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led1 { + label = "ext:led1"; + gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>; + }; + + led2 { + label = "ext:led2"; + gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "ext:led3"; + gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>; + }; + }; }; &pinctrl { -- cgit v1.2.3-70-g09d2 From cae010a1b663a779fdbfbf625839bc07dad16428 Mon Sep 17 00:00:00 2001 From: Lee Jones Date: Thu, 17 Sep 2015 15:45:00 +0200 Subject: ARM: STi: STiH407: Enable the 2 HW Random Number Generators for STiH4{07, 10} Signed-off-by: Lee Jones Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 1138eea5ab17..582154bbe3f3 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -639,5 +639,19 @@ status = "disabled"; }; + + rng10: rng@08a89000 { + compatible = "st,rng"; + reg = <0x08a89000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; + + rng11: rng@08a8a000 { + compatible = "st,rng"; + reg = <0x08a8a000 0x1000>; + clocks = <&clk_sysin>; + status = "okay"; + }; }; }; -- cgit v1.2.3-70-g09d2 From 7f14bededbf1e0db5d17743b27a8855ab05ad645 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 1 Oct 2015 20:48:29 +0800 Subject: ARM: dts: sun6i: hummingbird: Add aliases for rtc devices The hummingbird A31 has 2 rtc devices available: one in the SoC, and a pcf8563 external rtc on i2c2. For some unknown reason, the onboard backup battery alone can not supply enough power to the internal rtc. When external power is removed, the internal rtc would reset. Hence we want to use the external one by default. Add aliases for the rtc devices with the external one as rtc0. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 06d9391ca30e..3aa5bbc535c0 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -54,6 +54,8 @@ compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; aliases { + rtc0 = &pcf8563; + rtc1 = &rtc; serial0 = &uart0; }; -- cgit v1.2.3-70-g09d2 From 15ada16dc7657c08242d24067a4ddf07a2662062 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Wed, 30 Sep 2015 19:34:39 +0200 Subject: ARM: sun7i: dt: Add new Olimex A20 EVB device The A20-SOM-EVB is a reference design of a 2-layer board for the A20-SOM. It expands the features of A20-SOM by adding VGA connector, HDMI connector, audio In/Out, LCD connector, 2 Mpix camera, gigabit Ethernet, SATA, USB-OTG and 2 USB hosts. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 198 +++++++++++++++++++++++++ 2 files changed, 199 insertions(+) create mode 100644 arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c7adaa85ef3f..342ab3116feb 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -619,6 +619,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-m3.dtb \ sun7i-a20-mk808c.dtb \ + sun7i-a20-olimex-som-evb.dtb \ sun7i-a20-olinuxino-lime.dtb \ sun7i-a20-olinuxino-lime2.dtb \ sun7i-a20-olinuxino-micro.dtb \ diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts new file mode 100644 index 000000000000..b7fe102475e7 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts @@ -0,0 +1,198 @@ +/* + * Copyright 2015 - Marcus Cooper + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "Olimex A20-Olimex-SOM-EVB"; + compatible = "olimex,a20-olimex-som-evb", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olimex_som_evb>; + + green { + label = "a20-olimex-som-evb:green:usr"; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { + allwinner,pins = "PC3"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_olimex_som_evb: led_pins@0 { + allwinner,pins = "PH2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_ahci_5v { + pinctrl-0 = <&ahci_pwr_pin_olimex_som_evb>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From f138e54c4525fa789b556909c00359fea3c21a6c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 1 Oct 2015 02:02:27 +0300 Subject: ARM: shmobile: porter: initial device tree Add the initial device tree for the R8A7791 SoC based Porter low cost board (which is a slightly modified version of the Henninger board). SCIF0 serial port support is included, so that the serial console can work. Signed-off-by: Sergei Shtylyov Acked-by: Geert Uytterhoeven Signed-off-by: Simon Horman --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/r8a7791-porter.dts | 54 ++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) create mode 100644 arch/arm/boot/dts/r8a7791-porter.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 08f85bcc7da7..d285d9816d9d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -532,6 +532,7 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \ r8a7790-lager.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ + r8a7791-porter.dtb \ r8a7793-gose.dtb \ r8a7794-alt.dtb \ r8a7794-silk.dtb \ diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts new file mode 100644 index 000000000000..b5670dd388e6 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -0,0 +1,54 @@ +/* + * Device Tree Source for the Porter board + * + * Copyright (C) 2015 Cogent Embedded, Inc. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" + +/ { + model = "Porter"; + compatible = "renesas,porter", "renesas,r8a7791"; + + aliases { + serial0 = &scif0; + }; + + chosen { + bootargs = "ignore_loglevel"; + stdout-path = &scif0; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x40000000>; + }; + + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; +}; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 74ef4572004fc2abf5951a07aab36600a17b3a48 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 2 Oct 2015 01:05:12 +0300 Subject: ARM: shmobile: r8a7794: add USB PHY DT support Define the R8A7794 generic part of the USB PHY device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index a0747d749bb1..6ba0fa4890d0 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -690,6 +690,26 @@ 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; }; + usbphy: usb-phy@e6590100 { + compatible = "renesas,usb-phy-r8a7794"; + reg = <0 0xe6590100 0 0x100>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + clock-names = "usbhs"; + power-domains = <&cpg_clocks>; + status = "disabled"; + + usb0: usb-channel@0 { + reg = <0>; + #phy-cells = <1>; + }; + usb2: usb-channel@2 { + reg = <2>; + #phy-cells = <1>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From 1f4f6317ab67c118f54c94c24aa6b7dbfc2babec Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 2 Oct 2015 01:06:23 +0300 Subject: ARM: shmobile: silk: enable USB PHY Enable USB PHY device for the SILK board. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794-silk.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794-silk.dts b/arch/arm/boot/dts/r8a7794-silk.dts index 71bb56fef7e5..48ff3e2958ae 100644 --- a/arch/arm/boot/dts/r8a7794-silk.dts +++ b/arch/arm/boot/dts/r8a7794-silk.dts @@ -210,3 +210,7 @@ pinctrl-0 = <&usb1_pins>; pinctrl-names = "default"; }; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 45cb0bd77a85ee53234968109909654415479558 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sun, 13 Sep 2015 02:00:19 +0300 Subject: ARM: shmobile: r8a7794: link PCI USB devices to USB PHY Describe the PCI USB devices that are behind the PCI bridges, adding necessary links to the USB PHY device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index 6ba0fa4890d0..efc3548511c4 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -667,6 +667,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb0 0>; + phy-names = "usb"; + }; }; pci1: pci@ee0d0000 { @@ -688,6 +702,20 @@ interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + + usb@0,1 { + reg = <0x800 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; + + usb@0,2 { + reg = <0x1000 0 0 0 0>; + device_type = "pci"; + phys = <&usb2 0>; + phy-names = "usb"; + }; }; usbphy: usb-phy@e6590100 { -- cgit v1.2.3-70-g09d2 From 5325f83aba3cc80a1d3aa62a0350a107cfae7a43 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Tue, 28 Jul 2015 07:06:45 +0000 Subject: ARM: shmobile: dts: Add common file for AA121TD01 panel The Mitsubishi AA121TD01 panel is commonly used with the Marzen, Lager and Koelsch boards. Create a .dtsi file that describe the panel and its connection to the board. Signed-off-by: Kuninori Morimoto Reviewed-by: Laurent Pinchart Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi | 41 ++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi new file mode 100644 index 000000000000..a07ebf8f6938 --- /dev/null +++ b/arch/arm/boot/dts/r8a77xx-aa121td01-panel.dtsi @@ -0,0 +1,41 @@ +/* + * Common file for the AA121TD01 panel connected to Renesas R-Car boards + * + * Copyright (C) 2015 Renesas Electronics Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/ { + panel { + compatible = "mitsubishi,aa121td01", "panel-dpi"; + + width-mm = <261>; + height-mm = <163>; + + panel-timing { + /* 1280x800 @60Hz */ + clock-frequency = <71000000>; + hactive = <1280>; + vactive = <800>; + hsync-len = <70>; + hfront-porch = <20>; + hback-porch = <70>; + vsync-len = <5>; + vfront-porch = <3>; + vback-porch = <15>; + }; + + port { + panel_in: endpoint { + remote-endpoint = <&lvds_connector>; + }; + }; + }; +}; + +&lvds_connector { + remote-endpoint = <&panel_in>; +}; -- cgit v1.2.3-70-g09d2 From 2f33b9f796ce6ebb00f6e8238fba07149c5264f2 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 17 Sep 2015 02:53:58 +0300 Subject: ARM: shmobile: r8a7794: add HS-USB DT support Define the R8A7794 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7794.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi index efc3548511c4..a9977d6ee81a 100644 --- a/arch/arm/boot/dts/r8a7794.dtsi +++ b/arch/arm/boot/dts/r8a7794.dtsi @@ -718,6 +718,18 @@ }; }; + hsusb: usb@e6590000 { + compatible = "renesas,usbhs-r8a7794"; + reg = <0 0xe6590000 0 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp7_clks R8A7794_CLK_HSUSB>; + power-domains = <&cpg_clocks>; + renesas,buswait = <4>; + phys = <&usb0 1>; + phy-names = "usb"; + status = "disabled"; + }; + usbphy: usb-phy@e6590100 { compatible = "renesas,usb-phy-r8a7794"; reg = <0 0xe6590100 0 0x100>; -- cgit v1.2.3-70-g09d2 From a2f1a680115c527972ead1b89de4a31176d3c2c6 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Sun, 4 Oct 2015 21:58:48 +0300 Subject: ARM: dts: sun4i: Add AXP209 PMU regulators for pcDuino1/2 This allows voltage-scaling with cpufreq-dt. The reliability of voltage-scaling has been checked by reducing the voltage of all operating points by 0.025V (for extra safety headroom) and running libjpeg-turbo decoding tests on 5 pcDuino2 boards. It means that the standard sun4i voltages should be perfectly fine too. Signed-off-by: Siarhei Siamashka Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 35 +++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 4e3e1b9d8217..c882421d08ff 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -104,6 +104,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -129,12 +133,8 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupts = <0>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -188,6 +188,33 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- cgit v1.2.3-70-g09d2 From 956d8217842938c4e614dc5e8b24d6a499ad547a Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 2 Oct 2015 16:59:48 +0200 Subject: ARM: berlin: add a PWM node on the BG2Q This patch adds a PWM node in the Berlin BG2Q device tree, using the newly added Berlin PWM driver. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2q.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 32b871ed7a30..d996e8b8e130 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -493,6 +493,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 8eaaaa6f9d09bd53440b60f8aec38fe0c6b3d88b Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 2 Oct 2015 16:59:49 +0200 Subject: ARM: berlin: add a PWM node on the BG2 This patch adds a PWM node in the Berlin BG2 device tree, using the newly added Berlin PWM driver. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 11e446e5fb0b..eaadac3bdd44 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -420,6 +420,13 @@ }; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 5f5cdc08231eb802ad3890ba3bd2ef272c21b924 Mon Sep 17 00:00:00 2001 From: Antoine Tenart Date: Fri, 2 Oct 2015 16:59:50 +0200 Subject: ARM: berlin: add a PWM node on the BG2CD This patch adds a PWM node in the Berlin BG2CD device tree, using the newly added Berlin PWM driver. Signed-off-by: Antoine Tenart Signed-off-by: Sebastian Hesselbarth --- arch/arm/boot/dts/berlin2cd.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi index 75b14211559a..b16df157214d 100644 --- a/arch/arm/boot/dts/berlin2cd.dtsi +++ b/arch/arm/boot/dts/berlin2cd.dtsi @@ -381,6 +381,13 @@ status = "disabled"; }; + pwm: pwm@f20000 { + compatible = "marvell,berlin-pwm"; + reg = <0xf20000 0x40>; + clocks = <&chip_clk CLKID_CFG>; + #pwm-cells = <3>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 0877098d82fd1823878534b116a4a725e729701f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 6 Oct 2015 01:51:01 +0300 Subject: ARM: shmobile: porter: add Ether DT support Define the Porter board dependent part of the Ether device node. Enable DHCP and NFS root for the kernel booting. This patch is analogous to the commit 26b0d2cf73cb ("ARM: shmobile: henninger: add Ether DT support") as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index b5670dd388e6..ca59ff861923 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -20,7 +20,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = &scif0; }; @@ -44,6 +44,16 @@ renesas,groups = "scif0_data_d"; renesas,function = "scif0"; }; + + ether_pins: ether { + renesas,groups = "eth_link", "eth_mdio", "eth_rmii"; + renesas,function = "eth"; + }; + + phy1_pins: phy1 { + renesas,groups = "intc_irq0"; + renesas,function = "intc"; + }; }; &scif0 { @@ -52,3 +62,19 @@ status = "okay"; }; + +ðer { + pinctrl-0 = <ðer_pins &phy1_pins>; + pinctrl-names = "default"; + + phy-handle = <&phy1>; + renesas,ether-link-active-low; + status = "ok"; + + phy1: ethernet-phy@1 { + reg = <1>; + interrupt-parent = <&irqc0>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + micrel,led-mode = <1>; + }; +}; -- cgit v1.2.3-70-g09d2 From c5185068066d854dab2f1af1894cd994234c65ce Mon Sep 17 00:00:00 2001 From: Sean Paul Date: Thu, 17 Sep 2015 14:48:39 +0200 Subject: ARM: dts: Move display-timings node from fimd to dp in exynos5250-arndale, smdk5250 and smdk5420 This patch moves the display-timings node from fimd to dp to reflect the device tree bindings change. Signed-off-by: Sean Paul [tomeu.vizoso@collabora.com: Rebased] Signed-off-by: Tomeu Vizoso Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos5250-arndale.dts | 8 ++++---- arch/arm/boot/dts/exynos5250-smdk5250.dts | 16 ++++++++-------- arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 ++++--- 3 files changed, 16 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index db3f65f3eb45..c000532c1444 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -129,10 +129,6 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <4>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -152,6 +148,10 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>; vdd_osc-supply = <&ldo10_reg>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 15aea760c1da..66da0d1d9d8a 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -89,14 +89,6 @@ pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; status = "okay"; -}; - -&ehci { - samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; -}; - -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; @@ -116,6 +108,14 @@ }; }; +&ehci { + samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; +}; + +&fimd { + status = "okay"; +}; + &hdmi { hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 98871f972c8a..7520d52f4e22 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -98,10 +98,7 @@ samsung,link-rate = <0x0a>; samsung,lane-count = <4>; status = "okay"; -}; -&fimd { - status = "okay"; display-timings { native-mode = <&timing0>; timing0: timing@0 { @@ -118,6 +115,10 @@ }; }; +&fimd { + status = "okay"; +}; + &hdmi { status = "okay"; hpd-gpio = <&gpx3 7 0>; -- cgit v1.2.3-70-g09d2 From c21dbcfefc9dc9abc42971dc1f2681b6a8677c3c Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 28 Sep 2015 12:38:34 +0200 Subject: ARM: dts: Remove regulator-compatible usage in exynos4412-trats2 The regulator-compatible property from the regulator DT binding was deprecated and the correct approach is to use the node's name. This patch has no functional changes but by not using a deprecated property, new DTS based on this one will not carry the same issue. Signed-off-by: Javier Martinez Canillas Signed-off-by: Krzysztof Kozlowski --- arch/arm/boot/dts/exynos4412-trats2.dts | 105 +++++++++++--------------------- 1 file changed, 35 insertions(+), 70 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 2a1ebb76ebe0..93e3bbd4bd49 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -564,16 +564,14 @@ #clock-cells = <1>; voltage-regulators { - ldo1_reg: ldo1 { - regulator-compatible = "LDO1"; + ldo1_reg: LDO1 { regulator-name = "VALIVE_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; regulator-always-on; }; - ldo2_reg: ldo2 { - regulator-compatible = "LDO2"; + ldo2_reg: LDO2 { regulator-name = "VM1M2_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -583,32 +581,28 @@ }; }; - ldo3_reg: ldo3 { - regulator-compatible = "LDO3"; + ldo3_reg: LDO3 { regulator-name = "VCC_1.8V_AP"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo4_reg: ldo4 { - regulator-compatible = "LDO4"; + ldo4_reg: LDO4 { regulator-name = "VCC_2.8V_AP"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-always-on; }; - ldo5_reg: ldo5 { - regulator-compatible = "LDO5"; + ldo5_reg: LDO5 { regulator-name = "VCC_1.8V_IO"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-always-on; }; - ldo6_reg: ldo6 { - regulator-compatible = "LDO6"; + ldo6_reg: LDO6 { regulator-name = "VMPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -618,8 +612,7 @@ }; }; - ldo7_reg: ldo7 { - regulator-compatible = "LDO7"; + ldo7_reg: LDO7 { regulator-name = "VPLL_1.0V_AP"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -629,8 +622,7 @@ }; }; - ldo8_reg: ldo8 { - regulator-compatible = "LDO8"; + ldo8_reg: LDO8 { regulator-name = "VMIPI_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -639,15 +631,13 @@ }; }; - ldo9_reg: ldo9 { - regulator-compatible = "LDO9"; + ldo9_reg: LDO9 { regulator-name = "CAM_ISP_MIPI_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo10_reg: ldo10 { - regulator-compatible = "LDO10"; + ldo10_reg: LDO10 { regulator-name = "VMIPI_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -656,8 +646,7 @@ }; }; - ldo11_reg: ldo11 { - regulator-compatible = "LDO11"; + ldo11_reg: LDO11 { regulator-name = "VABB1_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -667,8 +656,7 @@ }; }; - ldo12_reg: ldo12 { - regulator-compatible = "LDO12"; + ldo12_reg: LDO12 { regulator-name = "VUOTG_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; @@ -677,15 +665,13 @@ }; }; - ldo13_reg: ldo13 { - regulator-compatible = "LDO13"; + ldo13_reg: LDO13 { regulator-name = "NFC_AVDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo14_reg: ldo14 { - regulator-compatible = "LDO14"; + ldo14_reg: LDO14 { regulator-name = "VABB2_1.95V"; regulator-min-microvolt = <1950000>; regulator-max-microvolt = <1950000>; @@ -695,8 +681,7 @@ }; }; - ldo15_reg: ldo15 { - regulator-compatible = "LDO15"; + ldo15_reg: LDO15 { regulator-name = "VHSIC_1.0V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1000000>; @@ -705,8 +690,7 @@ }; }; - ldo16_reg: ldo16 { - regulator-compatible = "LDO16"; + ldo16_reg: LDO16 { regulator-name = "VHSIC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -715,80 +699,69 @@ }; }; - ldo17_reg: ldo17 { - regulator-compatible = "LDO17"; + ldo17_reg: LDO17 { regulator-name = "CAM_SENSOR_CORE_1.2V"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; }; - ldo18_reg: ldo18 { - regulator-compatible = "LDO18"; + ldo18_reg: LDO18 { regulator-name = "CAM_ISP_SEN_IO_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo19_reg: ldo19 { - regulator-compatible = "LDO19"; + ldo19_reg: LDO19 { regulator-name = "VT_CAM_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo20_reg: ldo20 { - regulator-compatible = "LDO20"; + ldo20_reg: LDO20 { regulator-name = "VDDQ_PRE_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo21_reg: ldo21 { - regulator-compatible = "LDO21"; + ldo21_reg: LDO21 { regulator-name = "VTF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>; }; - ldo22_reg: ldo22 { - regulator-compatible = "LDO22"; + ldo22_reg: LDO22 { regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - ldo23_reg: ldo23 { - regulator-compatible = "LDO23"; + ldo23_reg: LDO23 { regulator-name = "TSP_AVDD_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo24_reg: ldo24 { - regulator-compatible = "LDO24"; + ldo24_reg: LDO24 { regulator-name = "TSP_VDD_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - ldo25_reg: ldo25 { - regulator-compatible = "LDO25"; + ldo25_reg: LDO25 { regulator-name = "LCD_VCC_3.3V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; }; - ldo26_reg: ldo26 { - regulator-compatible = "LDO26"; + ldo26_reg: LDO26 { regulator-name = "MOTOR_VCC_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; - buck1_reg: buck1 { - regulator-compatible = "BUCK1"; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1100000>; @@ -799,8 +772,7 @@ }; }; - buck2_reg: buck2 { - regulator-compatible = "BUCK2"; + buck2_reg: BUCK2 { regulator-name = "vdd_arm"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1500000>; @@ -811,8 +783,7 @@ }; }; - buck3_reg: buck3 { - regulator-compatible = "BUCK3"; + buck3_reg: BUCK3 { regulator-name = "vdd_int"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -823,8 +794,7 @@ }; }; - buck4_reg: buck4 { - regulator-compatible = "BUCK4"; + buck4_reg: BUCK4 { regulator-name = "vdd_g3d"; regulator-min-microvolt = <850000>; regulator-max-microvolt = <1150000>; @@ -834,40 +804,35 @@ }; }; - buck5_reg: buck5 { - regulator-compatible = "BUCK5"; + buck5_reg: BUCK5 { regulator-name = "VMEM_1.2V_AP"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; - buck6_reg: buck6 { - regulator-compatible = "BUCK6"; + buck6_reg: BUCK6 { regulator-name = "VCC_SUB_1.35V"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <1350000>; regulator-always-on; }; - buck7_reg: buck7 { - regulator-compatible = "BUCK7"; + buck7_reg: BUCK7 { regulator-name = "VCC_SUB_2.0V"; regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; regulator-always-on; }; - buck8_reg: buck8 { - regulator-compatible = "BUCK8"; + buck8_reg: BUCK8 { regulator-name = "VMEM_VDDF_3.0V"; regulator-min-microvolt = <2850000>; regulator-max-microvolt = <2850000>; maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; - buck9_reg: buck9 { - regulator-compatible = "BUCK9"; + buck9_reg: BUCK9 { regulator-name = "CAM_ISP_CORE_1.2V"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1200000>; -- cgit v1.2.3-70-g09d2 From e7604ae277ffa49474336fc2c099225e36559002 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 22 Sep 2015 15:55:56 -0500 Subject: ARM: socfpga: dts: add clock fields for I2C, UART and USB on Arria10 Add the required clock fields for all the I2C nodes. Also add missing clock fields for UART0 and USB1. Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi index 2340fcb2b535..cce9e50acf68 100644 --- a/arch/arm/boot/dts/socfpga_arria10.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10.dtsi @@ -519,6 +519,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02200 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -528,6 +529,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02300 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -537,6 +539,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02400 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -546,6 +549,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02500 0x100>; interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -555,6 +559,7 @@ compatible = "snps,designware-i2c"; reg = <0xffc02600 0x100>; interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -658,6 +663,7 @@ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; reg-shift = <2>; reg-io-width = <4>; + clocks = <&l4_sp_clk>; status = "disabled"; }; @@ -692,6 +698,8 @@ compatible = "snps,dwc2"; reg = <0xffb40000 0xffff>; interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_clk>; + clock-names = "otg"; phys = <&usbphy0>; phy-names = "usb2-phy"; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 19c21388272a64c0cd5c4a6a24eca33507ee6d50 Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 22 Sep 2015 14:50:37 -0500 Subject: ARM: socfpga: dts: enable USB and I2C on Arria10 SoCDK On the Arria10 Devkit, the I2C bus has a serial EEPROM and an RTC hanging off it. Also, enable the USB node. Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga_arria10_socdk.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi index 99aa9a1c8af0..567df98f1bb5 100644 --- a/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi +++ b/arch/arm/boot/dts/socfpga_arria10_socdk.dtsi @@ -70,6 +70,33 @@ status = "okay"; }; +&i2c1 { + speed-mode = <0>; + status = "okay"; + + /* + * adjust the falling times to decrease the i2c frequency to 50Khz + * because the LCD module does not work at the standard 100Khz + */ + i2c-sda-falling-time-ns = <6000>; + i2c-scl-falling-time-ns = <6000>; + + eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + &uart1 { status = "okay"; }; + +&usb0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 78cd6a9d8e154fe2ac5d2b912519e27545cfd13b Mon Sep 17 00:00:00 2001 From: Dinh Nguyen Date: Tue, 4 Aug 2015 23:25:50 -0500 Subject: arm64: dts: Add base stratix 10 dtsi Add the base DTS for Altera's SoCFPGA Stratix 10 platform. Signed-off-by: Dinh Nguyen --- v4: Add a non-zero ranges property for /soc node v3: change #address-cells and #size-cells to <2> change the GIC address to 0xfffc1000 update the GIC virtual CPU reg length to 0x2000 v2: use interrupt-affinity for pmu node --- arch/arm64/Kconfig.platforms | 5 + arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/altera/Makefile | 5 + arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi | 358 +++++++++++++++++++++ .../boot/dts/altera/socfpga_stratix10_socdk.dts | 39 +++ arch/arm64/configs/defconfig | 1 + 6 files changed, 409 insertions(+) create mode 100644 arch/arm64/boot/dts/altera/Makefile create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi create mode 100644 arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts (limited to 'arch') diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 23800a19a7bc..36303c84363e 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -66,6 +66,11 @@ config ARCH_SEATTLE help This enables support for AMD Seattle SOC Family +config ARCH_STRATIX10 + bool "Altera's Stratix 10 SoCFPGA Family" + help + This enables support for Altera's Stratix 10 SoCFPGA Family. + config ARCH_TEGRA bool "NVIDIA Tegra SoC Family" select ARCH_HAS_RESET_CONTROLLER diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index d9f88330e7b0..f58560614aef 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -1,3 +1,4 @@ +dts-dirs += altera dts-dirs += amd dts-dirs += apm dts-dirs += arm diff --git a/arch/arm64/boot/dts/altera/Makefile b/arch/arm64/boot/dts/altera/Makefile new file mode 100644 index 000000000000..d7a641698d77 --- /dev/null +++ b/arch/arm64/boot/dts/altera/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_STRATIX10) += socfpga_stratix10_socdk.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi new file mode 100644 index 000000000000..445aa678f914 --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi @@ -0,0 +1,358 @@ +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +/dts-v1/; + +/ { + compatible = "altr,socfpga-stratix10"; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x0>; + }; + + cpu1: cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x1>; + }; + + cpu2: cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x2>; + }; + + cpu3: cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + enable-method = "psci"; + reg = <0x3>; + }; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <0 120 8>, + <0 121 8>, + <0 122 8>, + <0 123 8>; + interrupt-affinity = <&cpu0>, + <&cpu1>, + <&cpu2>, + <&cpu3>; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + intc: intc@fffc1000 { + compatible = "arm,gic-400", "arm,cortex-a15-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0xfffc1000 0x1000>, + <0x0 0xfffc2000 0x2000>, + <0x0 0xfffc4000 0x2000>, + <0x0 0xfffc6000 0x2000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges = <0 0 0 0xffffffff>; + + clkmgr@ffd1000 { + compatible = "altr,clk-mgr"; + reg = <0xffd10000 0x1000>; + }; + + gmac0: ethernet@ff800000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff800000 0x2000>; + interrupts = <0 90 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac1: ethernet@ff802000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff802000 0x2000>; + interrupts = <0 91 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gmac2: ethernet@ff804000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.74a", "snps,dwmac"; + reg = <0xff804000 0x2000>; + interrupts = <0 92 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00]; + status = "disabled"; + }; + + gpio0: gpio@ffc03200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03200 0x100>; + status = "disabled"; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + gpio1: gpio@ffc03300 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dw-apb-gpio"; + reg = <0xffc03300 0x100>; + status = "disabled"; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + snps,nr-gpios = <24>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 110 4>; + }; + }; + + i2c0: i2c@ffc02800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02800 0x100>; + interrupts = <0 103 4>; + status = "disabled"; + }; + + i2c1: i2c@ffc02900 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02900 0x100>; + interrupts = <0 104 4>; + status = "disabled"; + }; + + i2c2: i2c@ffc02a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02a00 0x100>; + interrupts = <0 105 4>; + status = "disabled"; + }; + + i2c3: i2c@ffc02b00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02b00 0x100>; + interrupts = <0 106 4>; + status = "disabled"; + }; + + i2c4: i2c@ffc02c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc02c00 0x100>; + interrupts = <0 107 4>; + status = "disabled"; + }; + + mmc: dwmmc0@ff808000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "altr,socfpga-dw-mshc"; + reg = <0xff808000 0x1000>; + interrupts = <0 96 4>; + fifo-depth = <0x400>; + status = "disabled"; + }; + + ocram: sram@ffe00000 { + compatible = "mmio-sram"; + reg = <0xffe00000 0x100000>; + }; + + rst: rstmgr@ffd11000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd11000 0x1000>; + }; + + spi0: spi@ffda4000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda4000 0x1000>; + interrupts = <0 101 4>; + num-chipselect = <4>; + bus-num = <0>; + status = "disabled"; + }; + + spi1: spi@ffda5000 { + compatible = "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xffda5000 0x1000>; + interrupts = <0 102 4>; + num-chipselect = <4>; + bus-num = <0>; + status = "disabled"; + }; + + sysmgr: sysmgr@ffd12000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd12000 0x1000>; + }; + + /* Local timer */ + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0xf01>, + <1 14 0xf01>, + <1 11 0xf01>, + <1 10 0xf01>; + }; + + timer0: timer0@ffc03000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 113 4>; + reg = <0xffc03000 0x100>; + }; + + timer1: timer1@ffc03100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 114 4>; + reg = <0xffc03100 0x100>; + }; + + timer2: timer2@ffd00000 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 115 4>; + reg = <0xffd00000 0x100>; + }; + + timer3: timer3@ffd00100 { + compatible = "snps,dw-apb-timer"; + interrupts = <0 116 4>; + reg = <0xffd00100 0x100>; + }; + + uart0: serial0@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x100>; + interrupts = <0 108 4>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + uart1: serial1@ffc02100 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02100 0x100>; + interrupts = <0 109 4>; + reg-shift = <2>; + reg-io-width = <4>; + status = "disabled"; + }; + + usbphy0: usbphy@0 { + #phy-cells = <0>; + compatible = "usb-nop-xceiv"; + status = "okay"; + }; + + usb0: usb@ffb00000 { + compatible = "snps,dwc2"; + reg = <0xffb00000 0x40000>; + interrupts = <0 93 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usb1: usb@ffb40000 { + compatible = "snps,dwc2"; + reg = <0xffb40000 0x40000>; + interrupts = <0 94 4>; + phys = <&usbphy0>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + watchdog0: watchdog@ffd00200 { + compatible = "snps,dw-wdt"; + reg = <0xffd00200 0x100>; + interrupts = <0 117 4>; + status = "disabled"; + }; + + watchdog1: watchdog@ffd00300 { + compatible = "snps,dw-wdt"; + reg = <0xffd00300 0x100>; + interrupts = <0 118 4>; + status = "disabled"; + }; + + watchdog2: watchdog@ffd00400 { + compatible = "snps,dw-wdt"; + reg = <0xffd00400 0x100>; + interrupts = <0 125 4>; + status = "disabled"; + }; + + watchdog3: watchdog@ffd00500 { + compatible = "snps,dw-wdt"; + reg = <0xffd00500 0x100>; + interrupts = <0 126 4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts new file mode 100644 index 000000000000..41ea2dba2fce --- /dev/null +++ b/arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts @@ -0,0 +1,39 @@ +/* + * Copyright Altera Corporation (C) 2015. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program. If not, see . + */ + +/include/ "socfpga_stratix10.dtsi" + +/ { + model = "SoCFPGA Stratix 10 SoCDK"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 34d71dd86781..7f78e182afb2 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -39,6 +39,7 @@ CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_ROCKCHIP=y CONFIG_ARCH_SEATTLE=y +CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_132_SOC=y CONFIG_ARCH_QCOM=y -- cgit v1.2.3-70-g09d2 From a362ec8f677e5d701bc587edad93128897748c32 Mon Sep 17 00:00:00 2001 From: Tyler Baker Date: Wed, 30 Sep 2015 18:19:48 -0700 Subject: arm64: dts: add all hi6220 uart nodes This patch adds all UART nodes for the Hi6220 SoC. Recently a board[1] has been developed to standardize UART access across all the 96boards consumer edition boards. To use this hardware on HiKey we must configure and enable UART3. However, to ensure backward compatibility we must keep UART0 enabled as well. I have removed the hard coded clock index values in favor of using the ones already defined in include/dt-bindings/clock/hi6220-clock.h. Since UART0 needs to be soldered, it has been suggested to use the UART3 as the default console. This patch was boot tested on top of next-20150930, with both UART configurations. [1] http://www.seeedstudio.com/depot/96Boards-UART-p-2525.html?ref=newInBazaar Signed-off-by: Tyler Baker Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 7 +++-- arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 43 +++++++++++++++++++++++++- 2 files changed, 47 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts index e36a539468a5..8d43a0fce522 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts +++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts @@ -17,11 +17,14 @@ compatible = "hisilicon,hi6220-hikey", "hisilicon,hi6220"; aliases { - serial0 = &uart0; + serial0 = &uart0; /* On board UART0 */ + serial1 = &uart1; /* BT UART */ + serial2 = &uart2; /* LS Expansion UART0 */ + serial3 = &uart3; /* LS Expansion UART1 */ }; chosen { - stdout-path = "serial0:115200n8"; + stdout-path = "serial3:115200n8"; }; memory@0 { diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi index 3f03380815b6..82d2488a0e86 100644 --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi @@ -5,6 +5,7 @@ */ #include +#include / { compatible = "hisilicon,hi6220"; @@ -164,8 +165,48 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x0 0xf8015000 0x0 0x1000>; interrupts = ; - clocks = <&ao_ctrl 36>, <&ao_ctrl 36>; + clocks = <&ao_ctrl HI6220_UART0_PCLK>, + <&ao_ctrl HI6220_UART0_PCLK>; clock-names = "uartclk", "apb_pclk"; }; + + uart1: uart@f7111000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7111000 0x0 0x1000>; + interrupts = ; + clocks = <&sys_ctrl HI6220_UART1_PCLK>, + <&sys_ctrl HI6220_UART1_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@f7112000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7112000 0x0 0x1000>; + interrupts = ; + clocks = <&sys_ctrl HI6220_UART2_PCLK>, + <&sys_ctrl HI6220_UART2_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@f7113000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7113000 0x0 0x1000>; + interrupts = ; + clocks = <&sys_ctrl HI6220_UART3_PCLK>, + <&sys_ctrl HI6220_UART3_PCLK>; + clock-names = "uartclk", "apb_pclk"; + }; + + uart4: uart@f7114000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xf7114000 0x0 0x1000>; + interrupts = ; + clocks = <&sys_ctrl HI6220_UART4_PCLK>, + <&sys_ctrl HI6220_UART4_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; }; }; -- cgit v1.2.3-70-g09d2 From 01cf228b555b323bba9c76f96c07fb93f1064cba Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sat, 3 Oct 2015 17:02:56 -0700 Subject: ARM: keystone: Update compatible to have SoC specific matches With future SoCs of keystone2 family, the generic compatible match may not be sufficient to handle SoC specific handling. So introduce matches based on SoC compatiblity. Signed-off-by: Nishanth Menon Signed-off-by: Santosh Shilimkar --- arch/arm/mach-keystone/keystone.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/mach-keystone/keystone.c b/arch/arm/mach-keystone/keystone.c index e288010522f9..c279293f084c 100644 --- a/arch/arm/mach-keystone/keystone.c +++ b/arch/arm/mach-keystone/keystone.c @@ -97,6 +97,9 @@ static long long __init keystone_pv_fixup(void) } static const char *const keystone_match[] __initconst = { + "ti,k2hk", + "ti,k2e", + "ti,k2l", "ti,keystone", NULL, }; -- cgit v1.2.3-70-g09d2 From 91dca0f0fe419813b7450b0d092e9e23255db51b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Sat, 3 Oct 2015 17:02:56 -0700 Subject: ARM: dts: keystone: Update SoC specific compatible flags Update the compatible flags to allow specific SoC identification. Signed-off-by: Nishanth Menon Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2e-evm.dts | 2 +- arch/arm/boot/dts/k2e.dtsi | 3 +++ arch/arm/boot/dts/k2hk-evm.dts | 2 +- arch/arm/boot/dts/k2hk.dtsi | 3 +++ arch/arm/boot/dts/k2l-evm.dts | 2 +- arch/arm/boot/dts/k2l.dtsi | 3 +++ arch/arm/boot/dts/keystone.dtsi | 1 + 7 files changed, 13 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts index 50c83c21d911..b7e99807f5c2 100644 --- a/arch/arm/boot/dts/k2e-evm.dts +++ b/arch/arm/boot/dts/k2e-evm.dts @@ -13,7 +13,7 @@ #include "k2e.dtsi" / { - compatible = "ti,k2e-evm","ti,keystone"; + compatible = "ti,k2e-evm", "ti,k2e", "ti,keystone"; model = "Texas Instruments Keystone 2 Edison EVM"; soc { diff --git a/arch/arm/boot/dts/k2e.dtsi b/arch/arm/boot/dts/k2e.dtsi index 675fb8e492c6..1097dada56d2 100644 --- a/arch/arm/boot/dts/k2e.dtsi +++ b/arch/arm/boot/dts/k2e.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2e", "ti,keystone"; + model = "Texas Instruments Keystone 2 Edison SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 660ebf58d547..8161bf53271b 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -13,7 +13,7 @@ #include "k2hk.dtsi" / { - compatible = "ti,k2hk-evm","ti,keystone"; + compatible = "ti,k2hk-evm", "ti,k2hk", "ti,keystone"; model = "Texas Instruments Keystone 2 Kepler/Hawking EVM"; soc { diff --git a/arch/arm/boot/dts/k2hk.dtsi b/arch/arm/boot/dts/k2hk.dtsi index d0810a5f2968..ada4c7ac96e7 100644 --- a/arch/arm/boot/dts/k2hk.dtsi +++ b/arch/arm/boot/dts/k2hk.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2hk", "ti,keystone"; + model = "Texas Instruments Keystone 2 Kepler/Hawking SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/k2l-evm.dts b/arch/arm/boot/dts/k2l-evm.dts index 9a69a6b55374..00861244d788 100644 --- a/arch/arm/boot/dts/k2l-evm.dts +++ b/arch/arm/boot/dts/k2l-evm.dts @@ -13,7 +13,7 @@ #include "k2l.dtsi" / { - compatible = "ti,k2l-evm","ti,keystone"; + compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; model = "Texas Instruments Keystone 2 Lamarr EVM"; soc { diff --git a/arch/arm/boot/dts/k2l.dtsi b/arch/arm/boot/dts/k2l.dtsi index 49fd414f680c..4446da72b0ae 100644 --- a/arch/arm/boot/dts/k2l.dtsi +++ b/arch/arm/boot/dts/k2l.dtsi @@ -9,6 +9,9 @@ */ / { + compatible = "ti,k2l", "ti,keystone"; + model = "Texas Instruments Keystone 2 Lamarr SoC"; + cpus { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index fbc4a8e87234..3f272826f537 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -12,6 +12,7 @@ #include "skeleton.dtsi" / { + compatible = "ti,keystone"; model = "Texas Instruments Keystone 2 SoC"; #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From b941a5cbe10201afa937fba90d68d7af6093d3d4 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 7 Oct 2015 02:05:41 +0300 Subject: ARM: shmobile: porter: add SDHI0/2 DT support Define the Porter board dependent part of the SDHI0/2 device nodes along with the necessary voltage regulators (note that the Vcc regulators are dummy -- they are required but don't actually exist on the board). Also, GPIOs have to be used for the CD and WP signals due to the SDHI driver constraints... This patch is analogous to the commit 1299df03d719 ("ARM: shmobile: henninger: add SDHI0/2 DT support") as there are no differences between those boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 76 ++++++++++++++++++++++++++++++++++++ 1 file changed, 76 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index ca59ff861923..5bc4d23c1edb 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -10,6 +10,7 @@ /dts-v1/; #include "r8a7791.dtsi" +#include / { model = "Porter"; @@ -33,6 +34,50 @@ device_type = "memory"; reg = <2 0x00000000 0 0x40000000>; }; + + vcc_sdhi0: regulator@0 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI0 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi0: regulator@1 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI0 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; + + vcc_sdhi2: regulator@2 { + compatible = "regulator-fixed"; + + regulator-name = "SDHI2 Vcc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccq_sdhi2: regulator@3 { + compatible = "regulator-gpio"; + + regulator-name = "SDHI2 VccQ"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + states = <3300000 1 + 1800000 0>; + }; }; &extal_clk { @@ -54,6 +99,16 @@ renesas,groups = "intc_irq0"; renesas,function = "intc"; }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl"; + renesas,function = "sdhi0"; + }; + + sdhi2_pins: sd2 { + renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; + renesas,function = "sdhi2"; + }; }; &scif0 { @@ -78,3 +133,24 @@ micrel,led-mode = <1>; }; }; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi0>; + vqmmc-supply = <&vccq_sdhi0>; + cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sdhi2 { + pinctrl-0 = <&sdhi2_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&vcc_sdhi2>; + vqmmc-supply = <&vccq_sdhi2>; + cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 79d05ec96a768d37781f7c98489eea58de3e2348 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 1 Oct 2015 19:57:49 +0800 Subject: ARM: dts: sun8i: Add Reduced Serial Bus controller device node to A23/A33 dtsi This patch adds a device node for the Reduced Serial Bus (RSB) controller and the defacto pinmux setting to the A23/A33 dtsi. Since there is only one possible pinmux setting for RSB, just set it in the dtsi. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 04bccad977ee..828aaf52c342 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -651,6 +651,13 @@ #size-cells = <0>; #gpio-cells = <3>; + r_rsb_pins: r_rsb { + allwinner,pins = "PL0", "PL1"; + allwinner,function = "s_rsb"; + allwinner,drive = ; + allwinner,pull = ; + }; + r_uart_pins_a: r_uart@0 { allwinner,pins = "PL2", "PL3"; allwinner,function = "s_uart"; @@ -658,5 +665,19 @@ allwinner,pull = ; }; }; + + r_rsb: rsb@01f03400 { + compatible = "allwinner,sun8i-a23-rsb"; + reg = <0x01f03400 0x400>; + interrupts = ; + clocks = <&apb0_gates 3>; + clock-frequency = <3000000>; + resets = <&apb0_rst 3>; + pinctrl-names = "default"; + pinctrl-0 = <&r_rsb_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; -- cgit v1.2.3-70-g09d2 From d4eac998b9d18602d995e55ed31951a1b81d8f2a Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 1 Oct 2015 19:57:50 +0800 Subject: ARM: dts: sun8i: q8-common: Enable RSB controller for A23/A33 Q8 tablets The Reduced Serial Bus controller is used to talk to the onboard PMIC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-q8-common.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-q8-common.dtsi b/arch/arm/boot/dts/sun8i-q8-common.dtsi index f34273602f64..1a69231d2da5 100644 --- a/arch/arm/boot/dts/sun8i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun8i-q8-common.dtsi @@ -90,6 +90,10 @@ }; }; +&r_rsb { + status = "okay"; +}; + &r_uart { pinctrl-names = "default"; pinctrl-0 = <&r_uart_pins_a>; -- cgit v1.2.3-70-g09d2 From b2ec7029c9347879ec21dbe003ef80dd1343b3b4 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 1 Oct 2015 19:57:51 +0800 Subject: ARM: dts: sun8i: sinlinx-sina33: Enable Reduced Serial Bus controller The Reduced Serial Bus controller is used to talk to the onboard PMIC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts index 1d5390d4e03a..13ce68f06dd6 100644 --- a/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts +++ b/arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts @@ -130,6 +130,10 @@ }; }; +&r_rsb { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_b>; -- cgit v1.2.3-70-g09d2 From 52095d179c5b3254fa87aaa6990e164c5cf21e12 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Wed, 30 Sep 2015 14:39:47 +0800 Subject: ARM: dts: sun6i: hummingbird: Drop AXP221 DC1SW and DC5LDO supplies "dcdc1-supply" and "dcdc5-supply" have been dropped, as they are internally connected and should not be represented in the device tree. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 2 -- 1 file changed, 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 3aa5bbc535c0..f9d9fc07bc63 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -180,8 +180,6 @@ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; #interrupt-cells = <1>; - dcdc1-supply = <&vcc_3v0>; - dcdc5-supply = <&vcc_dram>; regulators { x-powers,dcdc-freq = <3000>; -- cgit v1.2.3-70-g09d2 From c60ce7fe82c46d9480b85858828e3042dfe6c9bf Mon Sep 17 00:00:00 2001 From: Alim Akhtar Date: Mon, 14 Sep 2015 11:01:33 +0530 Subject: arm64: dts: Add BUS1 instance pinctrl support for exynos7 This adds BUS1 instance pinctrl for exynos7 soc. Signed-off-by: Alim Akhtar Reviewed-by: Krzysztof Kozlowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 103 ++++++++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos7.dtsi | 7 ++ 2 files changed, 110 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi index 2eef4a279131..f77ddaf21d04 100644 --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi @@ -586,3 +586,106 @@ samsung,pin-drv = <2>; }; }; + +&pinctrl_bus1 { + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf4: gpf4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf5: gpf5 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpv6: gpv6 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + spi5_bus: spi5-bus { + samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + ufs_refclk_out: ufs-refclk-out { + samsung,pins = "gpg2-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + ufs_rst_n: ufs-rst-n { + samsung,pins = "gph1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi index d7a37c3a6b52..f9c5a549c2c0 100644 --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi @@ -26,6 +26,7 @@ pinctrl5 = &pinctrl_ese; pinctrl6 = &pinctrl_fsys0; pinctrl7 = &pinctrl_fsys1; + pinctrl8 = &pinctrl_bus1; }; cpus { @@ -278,6 +279,12 @@ interrupts = <0 203 0>; }; + pinctrl_bus1: pinctrl@14870000 { + compatible = "samsung,exynos7-pinctrl"; + reg = <0x14870000 0x1000>; + interrupts = <0 384 0>; + }; + hsi2c_0: hsi2c@13640000 { compatible = "samsung,exynos7-hsi2c"; reg = <0x13640000 0x1000>; -- cgit v1.2.3-70-g09d2 From 27e6699c35be9a849e35d58f381efc199a1e1ede Mon Sep 17 00:00:00 2001 From: Emilio Lopez Date: Thu, 8 Oct 2015 07:35:21 +0900 Subject: ARM: dts: Enable EC vboot context support on Peach boards The Peach boards use the EC to store the vboot context information, so add the corresponding properties on the EC node to indicate so. Reviewed-by: Krzysztof Kozlowski Acked-by: Javier Martinez Canillas Signed-off-by: Emilio Lopez Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 1 + arch/arm/boot/dts/exynos5800-peach-pi.dts | 1 + 2 files changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 8f4d76c5e11c..ac02fb42ac0c 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -935,6 +935,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index 7d5b386b5ae6..b60dec0f1f67 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -898,6 +898,7 @@ pinctrl-0 = <&ec_spi_cs &ec_irq>; reg = <0>; spi-max-frequency = <3125000>; + google,has-vbc-nvram; controller-data { samsung,spi-feedback-delay = <1>; -- cgit v1.2.3-70-g09d2 From de77e52d34269f25a33e231fe3c1431116776617 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 07:39:57 +0900 Subject: ARM: dts: Use GPIO constants for flags cells in exynos3250 boards The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-monk.dts | 8 ++++---- arch/arm/boot/dts/exynos3250-rinato.dts | 10 +++++----- 2 files changed, 9 insertions(+), 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index 540a0adf2be6..c14129e0761d 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -52,13 +52,13 @@ regulator-name = "V_EMMC_2.8V-fixed"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -266,14 +266,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 41a5fafb9aa9..830e216f7e10 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -49,7 +49,7 @@ i2c_max77836: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpd0 2 0>, <&gpd0 3 0>; + gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>; #address-cells = <1>; #size-cells = <0>; @@ -188,8 +188,8 @@ reg = <0>; vdd3-supply = <&ldo16_reg>; vci-supply = <&ldo20_reg>; - reset-gpios = <&gpe0 1 0>; - te-gpios = <&gpx0 6 0>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; power-on-delay= <30>; power-off-delay= <120>; reset-delay = <5>; @@ -368,14 +368,14 @@ regulator-name = "V_EMMC_1.8V"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo12_reg: LDO12 { regulator-name = "V_EMMC_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - samsung,ext-control-gpios = <&gpk0 2 0>; + samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>; }; ldo13_reg: LDO13 { -- cgit v1.2.3-70-g09d2 From 39c1c413c1970803137d58ba25ea554f4f0fccea Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 07:39:58 +0900 Subject: ARM: dts: Use GPIO constants for flags cells in exynos4120 boards The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4210-origen.dts | 15 ++++----- arch/arm/boot/dts/exynos4210-smdkv310.dts | 3 +- arch/arm/boot/dts/exynos4210-trats.dts | 29 ++++++++--------- arch/arm/boot/dts/exynos4210-universal_c210.dts | 42 +++++++++++++------------ 4 files changed, 47 insertions(+), 42 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index e050d85cdacd..b8f866991bdd 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include #include / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -57,35 +58,35 @@ up { label = "Up"; - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 1>; + gpios = <&gpx1 7 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 1>; + gpios = <&gpx1 6 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 1>; + gpios = <&gpx1 5 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; @@ -94,7 +95,7 @@ leds { compatible = "gpio-leds"; status { - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 043b03caff8f..bc1448ba95d3 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -16,6 +16,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include / { model = "Samsung smdkv310 evaluation board based on Exynos4210"; @@ -182,7 +183,7 @@ }; &spi_2 { - cs-gpios = <&gpc1 2 0>; + cs-gpios = <&gpc1 2 GPIO_ACTIVE_HIGH>; status = "okay"; w25x80@0 { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index ba34886f8b65..c69e468efd2e 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include / { model = "Samsung Trats based on Exynos4210"; @@ -39,7 +40,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk0 2 0>; + gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -48,7 +49,7 @@ regulator-name = "TSP_FIXED_VOLTAGES"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpl0 3 0>; + gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -57,7 +58,7 @@ regulator-name = "8M_AF_2.8V_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpk1 1 0>; + gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -66,7 +67,7 @@ regulator-name = "CAM_IO_EN"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 1 0>; + gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -75,7 +76,7 @@ regulator-name = "8M_1.2V_EN"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; - gpio = <&gpe2 5 0>; + gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -84,7 +85,7 @@ regulator-name = "VT_CORE_1.5V"; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1500000>; - gpio = <&gpe2 2 0>; + gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -93,21 +94,21 @@ compatible = "gpio-keys"; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -115,7 +116,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <10>; @@ -218,7 +219,7 @@ compatible = "samsung,s6e8aa0"; vdd3-supply = <&vcclcd_reg>; vci-supply = <&vlcd_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -304,9 +305,9 @@ max8997,pmic-ignore-gpiodvs-side-effect; max8997,pmic-buck125-default-dvs-idx = <0>; - max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>, - <&gpl0 0 0>; + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>, + <&gpl0 0 GPIO_ACTIVE_HIGH>; max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, <1250000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index eb379526e234..896be8f2342d 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4210.dtsi" +#include / { model = "Samsung Universal C210 based on Exynos4210 rev0"; @@ -65,7 +66,7 @@ regulator-name = "VMEM_VDD_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe1 3 0>; + gpio = <&gpe1 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -73,21 +74,21 @@ compatible = "gpio-keys"; vol-up-key { - gpios = <&gpx2 0 1>; + gpios = <&gpx2 0 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <1>; }; vol-down-key { - gpios = <&gpx2 1 1>; + gpios = <&gpx2 1 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <1>; }; config-key { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <171>; label = "config"; debounce-interval = <1>; @@ -95,14 +96,14 @@ }; camera-key { - gpios = <&gpx2 3 1>; + gpios = <&gpx2 3 GPIO_ACTIVE_LOW>; linux,code = <212>; label = "camera"; debounce-interval = <1>; }; power-key { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <1>; @@ -110,7 +111,7 @@ }; ok-key { - gpios = <&gpx3 5 1>; + gpios = <&gpx3 5 GPIO_ACTIVE_LOW>; linux,code = <352>; label = "ok"; debounce-interval = <1>; @@ -122,7 +123,7 @@ regulator-name = "TSP_2_8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpe2 3 0>; + gpio = <&gpe2 3 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -131,17 +132,17 @@ #address-cells = <1>; #size-cells = <0>; - gpio-sck = <&gpy3 1 0>; - gpio-mosi = <&gpy3 3 0>; + gpio-sck = <&gpy3 1 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpy3 3 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; - cs-gpios = <&gpy4 3 0>; + cs-gpios = <&gpy4 3 GPIO_ACTIVE_HIGH>; lcd@0 { compatible = "samsung,ld9040"; reg = <0>; vdd3-supply = <&ldo7_reg>; vci-supply = <&ldo17_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; spi-max-frequency = <1200000>; spi-cpol; spi-cpha; @@ -218,13 +219,13 @@ regulator-name = "HDMI_5V"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpe0 1 0>; + gpio = <&gpe0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; hdmi_ddc: i2c-ddc { compatible = "i2c-gpio"; - gpios = <&gpe4 2 0 &gpe4 3 0>; + gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <100>; #address-cells = <1>; #size-cells = <0>; @@ -267,7 +268,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; hdmi-en-supply = <&hdmi_en>; @@ -311,7 +312,8 @@ compatible = "maxim,max8952"; reg = <0x60>; - max8952,vid-gpios = <&gpx0 3 0>, <&gpx0 4 0>; + max8952,vid-gpios = <&gpx0 3 GPIO_ACTIVE_HIGH>, + <&gpx0 4 GPIO_ACTIVE_HIGH>; max8952,default-mode = <0>; max8952,dvs-mode-microvolt = <1250000>, <1200000>, <1050000>, <950000>; @@ -330,13 +332,13 @@ reg = <0x66>; max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 5 0>, - <&gpx0 6 0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, <1100000>, <1000000>; max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpe2 0 0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; regulators { @@ -551,7 +553,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo5_reg>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From c10d3290cbde0e81d92d622e0b58eea2739fe557 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 07:39:58 +0900 Subject: ARM: dts: Use GPIO constants for flags cells in exynos4412 boards The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 15 ++++++----- arch/arm/boot/dts/exynos4412-odroidu3.dts | 2 +- arch/arm/boot/dts/exynos4412-odroidx.dts | 8 +++--- arch/arm/boot/dts/exynos4412-origen.dts | 15 ++++++----- arch/arm/boot/dts/exynos4412-tiny4412.dts | 9 ++++--- arch/arm/boot/dts/exynos4412-trats2.dts | 34 ++++++++++++------------- 6 files changed, 43 insertions(+), 40 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi index c3e978d77367..edf0fc8db6ff 100644 --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -11,6 +11,7 @@ #include #include #include "exynos4412.dtsi" +#include / { chosen { @@ -30,7 +31,7 @@ power_key { interrupt-parent = <&gpx1>; interrupts = <3 0>; - gpios = <&gpx1 3 1>; + gpios = <&gpx1 3 GPIO_ACTIVE_LOW>; linux,code = ; label = "power key"; debounce-interval = <10>; @@ -70,7 +71,7 @@ pinctrl-0 = <&sd1_cd>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpk1 2 1>; + reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>; }; camera { @@ -181,7 +182,7 @@ }; &hdmi { - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd>; vdd-supply = <&ldo8_reg>; @@ -207,9 +208,9 @@ compatible = "smsc,usb3503"; reg = <0x08>; - intn-gpios = <&gpx3 0 0>; - connect-gpios = <&gpx3 4 0>; - reset-gpios = <&gpx3 5 0>; + intn-gpios = <&gpx3 0 GPIO_ACTIVE_HIGH>; + connect-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>; initial-mode = <1>; }; @@ -482,7 +483,7 @@ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; pinctrl-names = "default"; vmmc-supply = <&ldo4_reg &ldo21_reg>; - cd-gpios = <&gpk2 2 0>; + cd-gpios = <&gpk2 2 GPIO_ACTIVE_HIGH>; cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts index 1e6ef99eef59..646ff0bd001a 100644 --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -27,7 +27,7 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 679ac103ebf6..b44bb682e976 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -26,13 +26,13 @@ compatible = "gpio-leds"; led1 { label = "led1:heart"; - gpios = <&gpc1 0 1>; + gpios = <&gpc1 0 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2:mmc0"; - gpios = <&gpc1 2 1>; + gpios = <&gpc1 2 GPIO_ACTIVE_LOW>; default-state = "on"; linux,default-trigger = "mmc0"; }; @@ -44,7 +44,7 @@ home_key { interrupt-parent = <&gpx2>; interrupts = <2 0>; - gpios = <&gpx2 2 0>; + gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>; linux,code = ; label = "home key"; debounce-interval = <10>; @@ -57,7 +57,7 @@ regulator-name = "p3v3_en"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpa1 1 1>; + gpio = <&gpa1 1 GPIO_ACTIVE_LOW>; enable-active-high; regulator-always-on; }; diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts index 9d528af68c1a..c8d86af2fb98 100644 --- a/arch/arm/boot/dts/exynos4412-origen.dts +++ b/arch/arm/boot/dts/exynos4412-origen.dts @@ -14,6 +14,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include #include / { @@ -45,7 +46,7 @@ regulator-name = "VMEM_VDD_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpx1 1 0>; + gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -107,13 +108,13 @@ s5m8767,pmic-buck-default-dvs-idx = <3>; - s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 0>, - <&gpx2 4 0>, - <&gpx2 5 0>; + s5m8767,pmic-buck-dvs-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>, + <&gpx2 4 GPIO_ACTIVE_HIGH>, + <&gpx2 5 GPIO_ACTIVE_HIGH>; - s5m8767,pmic-buck-ds-gpios = <&gpm3 5 0>, - <&gpm3 6 0>, - <&gpm3 7 0>; + s5m8767,pmic-buck-ds-gpios = <&gpm3 5 GPIO_ACTIVE_HIGH>, + <&gpm3 6 GPIO_ACTIVE_HIGH>, + <&gpm3 7 GPIO_ACTIVE_HIGH>; s5m8767,pmic-buck2-dvs-voltage = <1250000>, <1200000>, <1200000>, <1200000>, diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts index 525684ca8dc0..4840bbdaa9ec 100644 --- a/arch/arm/boot/dts/exynos4412-tiny4412.dts +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -13,6 +13,7 @@ /dts-v1/; #include "exynos4412.dtsi" +#include / { model = "FriendlyARM TINY4412 board based on Exynos4412"; @@ -31,26 +32,26 @@ led1 { label = "led1"; - gpios = <&gpm4 0 1>; + gpios = <&gpm4 0 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "heartbeat"; }; led2 { label = "led2"; - gpios = <&gpm4 1 1>; + gpios = <&gpm4 1 GPIO_ACTIVE_LOW>; default-state = "off"; }; led3 { label = "led3"; - gpios = <&gpm4 2 1>; + gpios = <&gpm4 2 GPIO_ACTIVE_LOW>; default-state = "off"; }; led4 { label = "led4"; - gpios = <&gpm4 3 1>; + gpios = <&gpm4 3 GPIO_ACTIVE_LOW>; default-state = "off"; linux,default-trigger = "mmc0"; }; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 93e3bbd4bd49..d8bf4afb8bd9 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -65,7 +65,7 @@ regulator-name = "CAM_SENSOR_A"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 2 0>; + gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -74,7 +74,7 @@ regulator-name = "LCD_VDD_2.2V"; regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; - gpio = <&gpc0 1 0>; + gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -83,7 +83,7 @@ regulator-name = "CAM_AF"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpio = <&gpm0 4 0>; + gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -92,7 +92,7 @@ regulator-name = "LED_A_3.0V"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; - gpio = <&gpj0 5 0>; + gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>; enable-active-high; }; }; @@ -101,21 +101,21 @@ compatible = "gpio-keys"; key-down { - gpios = <&gpx3 3 1>; + gpios = <&gpx3 3 GPIO_ACTIVE_LOW>; linux,code = <114>; label = "volume down"; debounce-interval = <10>; }; key-up { - gpios = <&gpx2 2 1>; + gpios = <&gpx2 2 GPIO_ACTIVE_LOW>; linux,code = <115>; label = "volume up"; debounce-interval = <10>; }; key-power { - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = <116>; label = "power"; debounce-interval = <10>; @@ -123,7 +123,7 @@ }; key-ok { - gpios = <&gpx0 1 1>; + gpios = <&gpx0 1 GPIO_ACTIVE_LOW>; linux,code = <139>; label = "ok"; debounce-inteval = <10>; @@ -198,7 +198,7 @@ i2c_ak8975: i2c-gpio-0 { compatible = "i2c-gpio"; - gpios = <&gpy2 4 0>, <&gpy2 5 0>; + gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -207,13 +207,13 @@ ak8975@0c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; - gpios = <&gpj0 7 0>; + gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>; }; }; i2c_cm36651: i2c-gpio-2 { compatible = "i2c-gpio"; - gpios = <&gpf0 0 1>, <&gpf0 1 1>; + gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>; i2c-gpio,delay-us = <2>; #address-cells = <1>; #size-cells = <0>; @@ -359,7 +359,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 0>; + reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; @@ -446,7 +446,7 @@ clocks = <&camera 1>; clock-names = "extclk"; samsung,camclk-out = <1>; - gpios = <&gpm1 6 0>; + gpios = <&gpm1 6 GPIO_ACTIVE_HIGH>; port { is_s5k6a3_ep: endpoint { @@ -488,8 +488,8 @@ s5c73m3@3c { compatible = "samsung,s5c73m3"; reg = <0x3c>; - standby-gpios = <&gpm0 1 1>; /* ISP_STANDBY */ - xshutdown-gpios = <&gpf1 3 1>; /* ISP_RESET */ + standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */ + xshutdown-gpios = <&gpf1 3 GPIO_ACTIVE_LOW>; /* ISP_RESET */ vdd-int-supply = <&buck9_reg>; vddio-cis-supply = <&ldo9_reg>; vdda-supply = <&ldo17_reg>; @@ -1241,7 +1241,7 @@ &sdhci_2 { bus-width = <4>; - cd-gpios = <&gpx3 4 0>; + cd-gpios = <&gpx3 4 GPIO_ACTIVE_HIGH>; cd-inverted; pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; pinctrl-names = "default"; @@ -1268,7 +1268,7 @@ &spi_1 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; - cs-gpios = <&gpb 5 0>; + cs-gpios = <&gpb 5 GPIO_ACTIVE_HIGH>; status = "okay"; s5c73m3_spi: s5c73m3 { -- cgit v1.2.3-70-g09d2 From 31b9903c233e831f3b0c05c6a62c0e39e85e77ec Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 07:39:58 +0900 Subject: ARM: dts: Use GPIO constants for flags cells in exynos5420/5422/5800 boards The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5420-arndale-octa.dts | 3 ++- arch/arm/boot/dts/exynos5420-peach-pit.dts | 8 ++++---- arch/arm/boot/dts/exynos5420-smdk5420.dts | 7 ++++--- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 4 ++-- arch/arm/boot/dts/exynos5800-peach-pi.dts | 8 ++++---- 5 files changed, 16 insertions(+), 14 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts index eeb4ac22cfce..4ecef6981d5c 100644 --- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include #include #include #include @@ -44,7 +45,7 @@ wakeup { label = "SW-TACT1"; - gpios = <&gpx2 7 1>; + gpios = <&gpx2 7 GPIO_ACTIVE_LOW>; linux,code = ; gpio-key,wakeup; }; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index ac02fb42ac0c..e722c22b2ba9 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -153,7 +153,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x06>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; ports { port@0 { @@ -925,7 +925,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 7520d52f4e22..ac35aefd320f 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5420.dtsi" +#include / { model = "Samsung SMDK5420 board based on EXYNOS5420"; @@ -69,7 +70,7 @@ regulator-name = "VBUS0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg0 5 0>; + gpio = <&gpg0 5 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -80,7 +81,7 @@ regulator-name = "VBUS1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpg1 4 0>; + gpio = <&gpg1 4 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -121,7 +122,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; }; diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index a83d569baea8..1af5bdc2bdb1 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -43,7 +43,7 @@ pinctrl-0 = <&emmc_nrst_pin>; pinctrl-names = "default"; compatible = "mmc-pwrseq-emmc"; - reset-gpios = <&gpd1 0 1>; + reset-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>; }; fan0: pwm-fan { @@ -74,7 +74,7 @@ &hdmi { status = "okay"; - hpd-gpio = <&gpx3 7 0>; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_hpd_irq>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index b60dec0f1f67..56275a6f9fca 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -94,7 +94,7 @@ regulator-name = "P5.0V_USB3CON0"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 0 0>; + gpio = <&gph0 0 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb300_vbus_en>; enable-active-high; @@ -105,7 +105,7 @@ regulator-name = "P5.0V_USB3CON1"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gph0 1 0>; + gpio = <&gph0 1 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb301_vbus_en>; enable-active-high; @@ -147,7 +147,7 @@ samsung,color-depth = <1>; samsung,link-rate = <0x0a>; samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; panel = <&panel>; }; @@ -888,7 +888,7 @@ status = "okay"; num-cs = <1>; samsung,spi-src-clk = <0>; - cs-gpios = <&gpb1 2 0>; + cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>; cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; -- cgit v1.2.3-70-g09d2 From df829b06f0079165d9dc7719af8f8a7da852fe51 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Thu, 8 Oct 2015 07:39:58 +0900 Subject: ARM: dts: Use GPIO constants for flags cells in exynos5440 boards The board DTS are using numeric values instead of the defined GPIO constanst to express polarity, use them to make the DTS more clear. Signed-off-by: Javier Martinez Canillas Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5440-ssdk5440.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/arch/arm/boot/dts/exynos5440-ssdk5440.dts index e4443f4e6572..6a0d802e87c8 100644 --- a/arch/arm/boot/dts/exynos5440-ssdk5440.dts +++ b/arch/arm/boot/dts/exynos5440-ssdk5440.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "exynos5440.dtsi" +#include / { model = "SAMSUNG SSDK5440 board based on EXYNOS5440"; @@ -29,12 +30,12 @@ }; &pcie_0 { - reset-gpio = <&pin_ctrl 5 0>; + reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; &pcie_1 { - reset-gpio = <&pin_ctrl 22 0>; + reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From efbb05c2c00231d73393390db2156046bda787de Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 8 Oct 2015 01:00:06 +0300 Subject: ARM: shmobile: porter: enable SATA0 Enable SATA0 device for the Porter board. This patch is analogous to the commit 5a62ec57004f ("ARM: shmobile: henninger: enable SATA0") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 5bc4d23c1edb..7f46980ffd12 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -154,3 +154,7 @@ cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&sata0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 4a69fcd3a10803854852481ab16031563d2d5381 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 7 Oct 2015 22:31:04 +0200 Subject: ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards Signed-off-by: Carlo Caione Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 3 + arch/arm/boot/dts/meson8b-mxq.dts | 67 ++++++++++++ arch/arm/boot/dts/meson8b-odroidc1.dts | 67 ++++++++++++ arch/arm/boot/dts/meson8b.dtsi | 186 +++++++++++++++++++++++++++++++++ 4 files changed, 323 insertions(+) create mode 100644 arch/arm/boot/dts/meson8b-mxq.dts create mode 100644 arch/arm/boot/dts/meson8b-odroidc1.dts create mode 100644 arch/arm/boot/dts/meson8b.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d285d9816d9d..726734034d25 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -227,6 +227,9 @@ dtb-$(CONFIG_ARCH_MMP) += \ pxa168-aspenite.dtb \ pxa910-dkb.dtb \ mmp2-brownstone.dtb +dtb-$(CONFIG_MACH_MESON8B) += \ + meson8b-mxq.dtb \ + meson8b-odroidc1.dtb dtb-$(CONFIG_ARCH_MOXART) += \ moxart-uc7112lx.dtb dtb-$(CONFIG_SOC_IMX1) += \ diff --git a/arch/arm/boot/dts/meson8b-mxq.dts b/arch/arm/boot/dts/meson8b-mxq.dts new file mode 100644 index 000000000000..c7fdaeabbe7b --- /dev/null +++ b/arch/arm/boot/dts/meson8b-mxq.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "TRONFY MXQ S805"; + compatible = "tronfy,mxq", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts new file mode 100644 index 000000000000..a8e2911b2cbe --- /dev/null +++ b/arch/arm/boot/dts/meson8b-odroidc1.dts @@ -0,0 +1,67 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "meson8b.dtsi" + +/ { + model = "Hardkernel ODROID-C1"; + compatible = "hardkernel,odroid-c1", "amlogic,meson8b"; + + aliases { + serial0 = &uart_AO; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi new file mode 100644 index 000000000000..ee352bf687ff --- /dev/null +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -0,0 +1,186 @@ +/* + * Copyright 2015 Endless Mobile, Inc. + * Author: Carlo Caione + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include +#include "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x201>; + }; + + cpu@202 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x202>; + }; + + cpu@203 { + device_type = "cpu"; + compatible = "arm,cortex-a5"; + next-level-cache = <&L2>; + reg = <0x203>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + L2: l2-cache-controller@c4200000 { + compatible = "arm,pl310-cache"; + reg = <0xc4200000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + gic: interrupt-controller@c4301000 { + compatible = "arm,cortex-a9-gic"; + reg = <0xc4301000 0x1000>, + <0xc4300100 0x0100>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer@c1109940 { + compatible = "amlogic,meson6-timer"; + reg = <0xc1109940 0x18>; + interrupts = <0 10 1>; + }; + + uart_AO: serial@c81004c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc81004c0 0x18>; + interrupts = <0 90 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_A: serial@c11084c0 { + compatible = "amlogic,meson-uart"; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_B: serial@c11084dc { + compatible = "amlogic,meson-uart"; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + uart_C: serial@c1108700 { + compatible = "amlogic,meson-uart"; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; + clocks = <&clkc CLKID_CLK81>; + status = "disabled"; + }; + + clkc: clock-controller@c1104000 { + #clock-cells = <1>; + compatible = "amlogic,meson8b-clkc"; + reg = <0xc1108000 0x4>, <0xc1104000 0x460>; + }; + + pinctrl: pinctrl@c1109880 { + compatible = "amlogic,meson8b-pinctrl"; + reg = <0xc1109880 0x10>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio: banks@c11080b0 { + reg = <0xc11080b0 0x28>, + <0xc11080e8 0x18>, + <0xc1108120 0x18>, + <0xc1108030 0x38>; + reg-names = "mux", "pull", "pull-enable", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio_ao: ao-bank@c1108030 { + reg = <0xc8100014 0x4>, + <0xc810002c 0x4>, + <0xc8100024 0x8>; + reg-names = "mux", "pull", "gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + uart_ao_a_pins: uart_ao_a { + mux { + groups = "uart_tx_ao_a", "uart_rx_ao_a"; + function = "uart_ao"; + }; + }; + }; + }; +}; /* end of / */ -- cgit v1.2.3-70-g09d2 From 736ef3395ab10dffa0f42d215bee55b72d1cbb0a Mon Sep 17 00:00:00 2001 From: Romain Perier Date: Mon, 24 Aug 2015 18:04:41 +0200 Subject: ARM: dts: rockchip: Add support for SD/MMC on MarsBoard-RK3066 This enables SDMMC0 on the board and gives a basic support for SD cards. Signed-off-by: Romain Perier Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-marsboard.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3066a-marsboard.dts b/arch/arm/boot/dts/rk3066a-marsboard.dts index bae965c123c1..7cdc308bfac5 100644 --- a/arch/arm/boot/dts/rk3066a-marsboard.dts +++ b/arch/arm/boot/dts/rk3066a-marsboard.dts @@ -178,6 +178,14 @@ }; }; +&mmc0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; + vmmc-supply = <&vcc_sd0>; +}; + &pinctrl { lan8720a { phy_int: phy-int { -- cgit v1.2.3-70-g09d2 From d5f9f4ff73e975f3119e0fbf37d47d102b243dcc Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 24 Aug 2015 15:58:03 -0700 Subject: ARM: dts: rockchip: add veyron-jaq board a.k.a. Haier Chromebook 11, and others Signed-off-by: Brian Norris Reviewed-by: Javier Martinez Canillas Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.txt | 7 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-veyron-jaq.dts | 176 +++++++++++++++++++++ 3 files changed, 184 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-veyron-jaq.dts (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index af58cd74aeff..cc421ed530e7 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -31,6 +31,13 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "netxeon,r89", "rockchip,rk3288"; +- Google Jaq (Haier Chromebook 11 and more): + Required root node properties: + - compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", + "google,veyron-jaq-rev1", "google,veyron-jaq", + "google,veyron", "rockchip,rk3288"; + - Google Jerry (Hisense Chromebook C11 and more): Required root node properties: - compatible = "google,veyron-jerry-rev7", "google,veyron-jerry-rev6", diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..e09809dbc8f2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -507,6 +507,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ rk3288-r89.dtb \ + rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-minnie.dtb \ rk3288-veyron-pinky.dtb \ diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts new file mode 100644 index 000000000000..c2f52cfb4d06 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -0,0 +1,176 @@ +/* + * Google Veyron Jaq Rev 1+ board device tree source + * + * Copyright 2015 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "rk3288-veyron-chromebook.dtsi" +#include "cros-ec-sbs.dtsi" + +/ { + model = "Google Jaq"; + compatible = "google,veyron-jaq-rev5", "google,veyron-jaq-rev4", + "google,veyron-jaq-rev3", "google,veyron-jaq-rev2", + "google,veyron-jaq-rev1", "google,veyron-jaq", + "google,veyron", "rockchip,rk3288"; + + panel_regulator: panel-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio7 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_enable_h>; + regulator-name = "panel_regulator"; + vin-supply = <&vcc33_sys>; + }; + + vcc18_lcd: vcc18-lcd { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&avdd_1v8_disp_en>; + regulator-name = "vcc18_lcd"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc18_wl>; + }; + + backlight_regulator: backlight-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 12 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_pwr_en>; + regulator-name = "backlight_regulator"; + vin-supply = <&vcc33_sys>; + startup-delay-us = <15000>; + }; +}; + +&rk808 { + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l &dvs_1 &dvs_2>; + dvs-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>, + <&gpio7 15 GPIO_ACTIVE_HIGH>; + + regulators { + mic_vcc: LDO_REG2 { + regulator-name = "mic_vcc"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; +}; + +&sdmmc { + disable-wp; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd_disabled &sdmmc_cd_gpio + &sdmmc_bus4>; +}; + +&vcc_5v { + enable-active-high; + gpio = <&gpio7 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&drv_5v>; +}; + +&vcc50_hdmi { + enable-active-high; + gpio = <&gpio5 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc50_hdmi_en>; +}; + +&pinctrl { + backlight { + bl_pwr_en: bl_pwr_en { + rockchip,pins = <2 12 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + buck-5v { + drv_5v: drv-5v { + rockchip,pins = <7 21 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + edp { + edp_hpd: edp_hpd { + rockchip,pins = <7 11 RK_FUNC_2 &pcfg_pull_down>; + }; + }; + + hdmi { + vcc50_hdmi_en: vcc50-hdmi-en { + rockchip,pins = <5 19 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + lcd { + lcd_enable_h: lcd-en { + rockchip,pins = <7 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + avdd_1v8_disp_en: avdd-1v8-disp-en { + rockchip,pins = <2 13 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + dvs_1: dvs-1 { + rockchip,pins = <7 12 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + dvs_2: dvs-2 { + rockchip,pins = <7 15 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 8915f36441d4506384b6e1be38ed0037946a77df Mon Sep 17 00:00:00 2001 From: Alexandru M Stan Date: Wed, 2 Sep 2015 16:27:58 -0700 Subject: ARM: dts: rockchip: pull up cts lines on rk3288 The flow control lines from a user accessible UART are optional, the user might not have anything connected to those pins. In order to prevent random interrupts happening and noise affecting the cts pin should be pulled up. Note that the default state for that pin on the rk3288 is pulled up, so this patch merely restores them. This is similar to what we're already doing with the RX pin, so it should be safe. At worst it might be a slightly higher power usage (through ~50 kohms) when the cts is low. Suggested-by: Neil Hendin Signed-off-by: Alexandru M Stan Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 906e938fb6bf..0e8fd5353724 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -1211,7 +1211,7 @@ }; uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; }; uart0_rts: uart0-rts { @@ -1226,7 +1226,7 @@ }; uart1_cts: uart1-cts { - rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_up>; }; uart1_rts: uart1-rts { @@ -1249,7 +1249,7 @@ }; uart3_cts: uart3-cts { - rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_up>; }; uart3_rts: uart3-rts { @@ -1264,7 +1264,7 @@ }; uart4_cts: uart4-cts { - rockchip,pins = <5 14 3 &pcfg_pull_none>; + rockchip,pins = <5 14 3 &pcfg_pull_up>; }; uart4_rts: uart4-rts { -- cgit v1.2.3-70-g09d2 From 035015b10e7545bb503413999070e99ccd32c1d2 Mon Sep 17 00:00:00 2001 From: Alexandru M Stan Date: Wed, 2 Sep 2015 16:27:59 -0700 Subject: ARM: dts: rockchip: Remove specific cts pullup from veyron With the previous patch ("rk3288: pull up cts lines") this is redundant, I sent that patch for the same reason this existed here, so the lines don't wiggle randomly when disconnected. Signed-off-by: Alexandru M Stan Reviewed-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-veyron.dtsi | 12 ------------ 1 file changed, 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-veyron.dtsi b/arch/arm/boot/dts/rk3288-veyron.dtsi index 2fa7a0dc83f7..2b5d2e2aa606 100644 --- a/arch/arm/boot/dts/rk3288-veyron.dtsi +++ b/arch/arm/boot/dts/rk3288-veyron.dtsi @@ -543,18 +543,6 @@ }; }; - /* - * On Marvell-based hardware this is a no-connect. Make sure we enable - * the pullup so that the line doesn't float. The pullup shouldn't - * hurt on Broadcom-based hardware since the other side is actively - * driving this signal. As proof: we've already got a pullup on RX. - */ - uart0 { - uart0_cts: uart0-cts { - rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_up>; - }; - }; - write-protect { fw_wp_ap: fw-wp-ap { rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>; -- cgit v1.2.3-70-g09d2 From e61ccb12d3b78c229c07e8b3e9008f1ce6dd1b74 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 2 Sep 2015 14:54:22 -0700 Subject: ARM: dts: rockchip: Add the hdmi-ddc pinctrl settings for rk3288 The pins for i2c5 can either be configured as "I2C5" which means that they're controlled by the normal RK3288 I2C controller or as "EDP / HDMI I2C". It's unclear why EDP is referenced here since apparently setting the mux to this position enables I2C communication using the dw_hdmi block with a patch like . There appear to be some reasons why using the builtin I2C controller in dw_hdmi is better than using the normal RK3288 I2C controller, so boards based on rk3288 might eventually want to use this pinmux if it's known to work. Once driver support in dw_hdmi lands, boards would use this by selecting this pinctrl for the HDMI block and then _not_ specifying a ddc-i2c-bus and _not_ setting the status to "okay" for i2c5 (which uses the same pins). Signed-off-by: Douglas Anderson Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 0e8fd5353724..a12e654504bc 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -923,6 +923,13 @@ #interrupt-cells = <2>; }; + hdmi { + hdmi_ddc: hdmi-ddc { + rockchip,pins = <7 19 RK_FUNC_2 &pcfg_pull_none>, + <7 20 RK_FUNC_2 &pcfg_pull_none>; + }; + }; + pcfg_pull_up: pcfg-pull-up { bias-pull-up; }; -- cgit v1.2.3-70-g09d2 From 2a4527ff53a8a85ac766a63a45239d7ea4bd1fd6 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Sat, 12 Sep 2015 18:00:50 +0800 Subject: ARM: dts: rockchip: support highspeed sd-cards for rk3188-radxarock Add cap-sd-highspeed and cap-mmc-highspeed for rk3188-radxarock board to make sd cards running faster. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188-radxarock.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index d2180e5d2b05..9b31abedcef1 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -289,6 +289,8 @@ vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; -- cgit v1.2.3-70-g09d2 From 1d727ec922e666e08fbdad7328947c9943e58439 Mon Sep 17 00:00:00 2001 From: Shawn Lin Date: Sat, 12 Sep 2015 18:01:39 +0800 Subject: ARM: dts: rockchip: support highspeed sd-cards on rk3066a boards Add cap-sd-highspeed and cap-mmc-highspeed for rk3066a-bqcurie2 and rk3066a-rayeager boards to make sd cards run faster. Signed-off-by: Shawn Lin Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3066a-bqcurie2.dts | 2 ++ arch/arm/boot/dts/rk3066a-rayeager.dts | 2 ++ 2 files changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index c0273755431a..38c91a839795 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -186,6 +186,8 @@ pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd0>; bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; disable-wp; }; diff --git a/arch/arm/boot/dts/rk3066a-rayeager.dts b/arch/arm/boot/dts/rk3066a-rayeager.dts index e36383c701dc..341c1f87936a 100644 --- a/arch/arm/boot/dts/rk3066a-rayeager.dts +++ b/arch/arm/boot/dts/rk3066a-rayeager.dts @@ -330,6 +330,8 @@ pinctrl-names = "default"; pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>; vmmc-supply = <&vcc_sd>; + cap-mmc-highspeed; + cap-sd-highspeed; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 44d5039a9add451b6cd240515d59d5848ba16fd5 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Tue, 15 Sep 2015 08:57:21 +0200 Subject: ARM: dts: rockchip: Add dtb for the Radxa Rock 2 Square board The Radxa Rock 2 Square board is a combination of the Radxa Rock 2 SoM with the Square baseboard. Add a dtsi for the SoM which can be included into the dts for the various baseboards (e.g. full and square) and a dts for the square board. Currently supported are serial console, wired networking, hdmi output, eMMC and SD storage and USB. Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3288-rock2-som.dtsi | 277 +++++++++++++++++++++ arch/arm/boot/dts/rk3288-rock2-square.dts | 149 +++++++++++ 4 files changed, 431 insertions(+) create mode 100644 arch/arm/boot/dts/rk3288-rock2-som.dtsi create mode 100644 arch/arm/boot/dts/rk3288-rock2-square.dts (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index cc421ed530e7..8e985dd2f181 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "radxa,rock", "rockchip,rk3188"; +- Radxa Rock2 Square board: + Required root node properties: + - compatible = "radxa,rock2-square", "rockchip,rk3288"; + - Firefly Firefly-RK3288 board: Required root node properties: - compatible = "firefly,firefly-rk3288", "rockchip,rk3288"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e09809dbc8f2..388bd7de21af 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -507,6 +507,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ rk3288-r89.dtb \ + rk3288-rock2-square.dtb \ rk3288-veyron-jaq.dtb \ rk3288-veyron-jerry.dtb \ rk3288-veyron-minnie.dtb \ diff --git a/arch/arm/boot/dts/rk3288-rock2-som.dtsi b/arch/arm/boot/dts/rk3288-rock2-som.dtsi new file mode 100644 index 000000000000..1813b7c36556 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-som.dtsi @@ -0,0 +1,277 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + device_type = "memory"; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + pinctrl-0 = <&emmc_reset>; + pinctrl-names = "default"; + reset-gpios = <&gpio3 9 GPIO_ACTIVE_LOW>; + }; + + ext_gmac: external-gmac-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "ext_gmac"; + }; + + vcc_sys: vsys-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_sys"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&cpu0 { + cpu0-supply = <&vdd_cpu>; +}; + +&emmc { + bus-width = <8>; + cap-mmc-highspeed; + disable-wp; + non-removable; + num-slots = <1>; + mmc-pwrseq = <&emmc_pwrseq>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&ext_gmac>; + clock_in_out = "input"; + phy-mode = "rgmii"; + phy-supply = <&vccio_pmu>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins &phy_rst>; + snps,reset-gpio = <&gpio4 8 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + rx_delay = <0x10>; + tx_delay = <0x30>; +}; + +&i2c0 { + status = "okay"; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + inl1-supply = <&vcc_io>; + inl2-supply = <&vcc_sys>; + inl3-supply = <&vcc_20>; + vp1-supply = <&vcc_sys>; + vp2-supply = <&vcc_sys>; + vp3-supply = <&vcc_sys>; + vp4-supply = <&vcc_sys>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; + + vdd_cpu: syr827@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-boot-on; + regulator-enable-ramp-delay = <300>; + regulator-name = "vdd_cpu"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; + + vdd_gpu: syr828@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + regulator-always-on; + regulator-enable-ramp-delay = <300>; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-name = "vdd_gpu"; + regulator-ramp-delay = <8000>; + vin-supply = <&vcc_sys>; + }; +}; + +&pinctrl { + pcfg_output_high: pcfg-output-high { + output-high; + }; + + emmc { + emmc_reset: emmc-reset { + rockchip,pins = <3 9 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + phy_rst: phy-rst { + rockchip,pins = <4 8 RK_FUNC_GPIO &pcfg_output_high>; + }; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */ + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts new file mode 100644 index 000000000000..d5f6f2665e6c --- /dev/null +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -0,0 +1,149 @@ +/* + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3288-rock2-som.dtsi" + +/ { + model = "Radxa Rock 2 Square"; + compatible = "radxa,rock2-square", "rockchip,rk3288"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + vcc_usb_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + /* Always on as the rockchip usb phy doesn't have a vbus-supply + * property + */ + regulator-always-on; + regulator-name = "vcc_host"; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_io>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + disable-wp; /* wp not hooked up */ + num-slots = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&gmac { + status = "ok"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c5>; + status = "okay"; +}; + +&i2c0 { + hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + + }; +}; + +&i2c5 { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 48961b3494df0497037c43f5d263e60470dc487f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 30 Sep 2015 20:49:38 +0200 Subject: ARM: dts: rockchip: add rk3288-popmetal board to dtb list The popmetal board was not included in the list of Rockchip boards, so was only built when explicitly called with make rk3288-popmetal.dtb but not in a generic make dtbs, so add the missing entry. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 388bd7de21af..301b25e4c331 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -506,6 +506,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-evb-rk808.dtb \ rk3288-firefly-beta.dtb \ rk3288-firefly.dtb \ + rk3288-popmetal.dtb \ rk3288-r89.dtb \ rk3288-rock2-square.dtb \ rk3288-veyron-jaq.dtb \ -- cgit v1.2.3-70-g09d2 From fa1c193261199f4717879e02ea4a3e8181e1b512 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 30 Sep 2015 20:58:53 +0200 Subject: ARM: dts: rockchip: add rk3288-popmetal mmc supplies Add missing regulators and supply properties to emmc and sdmmc nodes. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-popmetal.dts | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index f82b956ebf17..b677611a710f 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -86,6 +86,26 @@ pinctrl-0 = <&ir_int>; }; + vcc_flash: flash-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_sd: sdmmc-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio7 11 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -109,6 +129,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc_flash>; status = "okay"; }; @@ -121,6 +143,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; @@ -405,6 +429,12 @@ rockchip,pins = ; }; }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <7 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; }; &tsadc { -- cgit v1.2.3-70-g09d2 From 90f9a541d8329077f216660c2b3d6772e071d4ef Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 30 Sep 2015 21:00:16 +0200 Subject: ARM: dts: rockchip: add rk3288-popmetal iodomains Add the iodomains node and reference the correct regulator for each domain. This also includes adding the currently unused dvp regulators and fixing up two regulators to follow the naming in the schematics. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-popmetal.dts | 55 ++++++++++++++++++++++++++++++++--- 1 file changed, 51 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-popmetal.dts b/arch/arm/boot/dts/rk3288-popmetal.dts index b677611a710f..65c475642d5a 100644 --- a/arch/arm/boot/dts/rk3288-popmetal.dts +++ b/arch/arm/boot/dts/rk3288-popmetal.dts @@ -79,6 +79,22 @@ }; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&vcc18_dvp>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; @@ -114,6 +130,31 @@ regulator-always-on; regulator-boot-on; }; + + /* + * A PT5128 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc18_dvp: vcc18-dvp-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc18-dvp"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -321,22 +362,22 @@ }; }; - vcca_codec: LDO_REG8 { + vcca_33: LDO_REG8 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcca_codec"; + regulator-name = "vcca_33"; regulator-state-mem { regulator-on-in-suspend; regulator-suspend-microvolt = <3300000>; }; }; - vcc_wl: SWITCH_REG1 { + vccio_wl: SWITCH_REG1 { regulator-always-on; regulator-boot-on; - regulator-name = "vcc_wl"; + regulator-name = "vccio_wl"; regulator-state-mem { regulator-on-in-suspend; }; @@ -412,6 +453,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + ir { ir_int: ir-int { rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_up>; -- cgit v1.2.3-70-g09d2 From fae3b81120144696c54fdbbf09d8fe82c93d2851 Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 30 Sep 2015 21:07:09 +0200 Subject: ARM: dts: rockchip: fixup firefly mmc supplies Fix some incorrect references to mmc regulators. vccio_wl for example is the io-voltage supply not the core supply of the wifi module itself, which is vbat_wl instead. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 20fa0ef0b96b..6aafc5deb0b1 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -96,7 +96,7 @@ }; }; - vcc_sys: vsys-regulator { + vbat_wl: vcc_sys: vsys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; regulator-min-microvolt = <5000000>; @@ -325,7 +325,7 @@ regulator-always-on; }; - vcc_18: REG11 { + vccio_wl: vcc_18: REG11 { regulator-name = "vcc_18"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -445,7 +445,8 @@ num-slots = <1>; pinctrl-names = "default"; pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>; - vmmc-supply = <&vcc_18>; + vmmc-supply = <&vbat_wl>; + vqmmc-supply = <&vccio_wl>; status = "okay"; }; @@ -459,6 +460,7 @@ pinctrl-names = "default"; pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>; vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 4490dc5cee5e6b3631f28fdb1a4548c90912bb8f Mon Sep 17 00:00:00 2001 From: Heiko Stuebner Date: Wed, 30 Sep 2015 21:10:00 +0200 Subject: ARM: dts: rockchip: add rk3288-firefly iodomains Add the iodomains node and reference the correct regulator for each domain. This also includes adding the currently unused dvp regulators. Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-firefly.dtsi | 47 +++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi index 6aafc5deb0b1..4e3fd9aefe34 100644 --- a/arch/arm/boot/dts/rk3288-firefly.dtsi +++ b/arch/arm/boot/dts/rk3288-firefly.dtsi @@ -48,6 +48,14 @@ reg = <0 0x80000000>; }; + dovdd_1v8: dovdd-1v8-regulator { + compatible = "regulator-fixed"; + regulator-name = "dovdd_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc28_dvp>; + }; + ext_gmac: external-gmac-clock { compatible = "fixed-clock"; #clock-cells = <0>; @@ -55,6 +63,22 @@ clock-output-names = "ext_gmac"; }; + io_domains: io-domains { + compatible = "rockchip,rk3288-io-voltage-domain"; + rockchip,grf = <&grf>; + + audio-supply = <&vcca_33>; + bb-supply = <&vcc_io>; + dvp-supply = <&dovdd_1v8>; + flash0-supply = <&vcc_flash>; + flash1-supply = <&vcc_lan>; + gpio30-supply = <&vcc_io>; + gpio1830-supply = <&vcc_io>; + lcdc-supply = <&vcc_io>; + sdcard-supply = <&vccio_sd>; + wifi-supply = <&vccio_wl>; + }; + ir: ir-receiver { compatible = "gpio-ir-receiver"; pinctrl-names = "default"; @@ -160,6 +184,23 @@ regulator-always-on; vin-supply = <&vcc_5v>; }; + + /* + * A TT8142 creates both dovdd_1v8 and vcc28_dvp, controlled + * by the dvp_pwr pin. + */ + vcc28_dvp: vcc28-dvp-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&dvp_pwr>; + regulator-name = "vcc28_dvp"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + vin-supply = <&vcc_io>; + }; }; &cpu0 { @@ -373,6 +414,12 @@ }; }; + dvp { + dvp_pwr: dvp-pwr { + rockchip,pins = <0 11 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + gmac { phy_int: phy-int { rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>; -- cgit v1.2.3-70-g09d2 From b63af764ca5134341aa3a2836b356a65902ea9d4 Mon Sep 17 00:00:00 2001 From: Caesar Wang Date: Tue, 8 Sep 2015 14:18:23 +0800 Subject: ARM: dts: rockchip: add the support power-domain node on RK3288 SoCs We can add more domains node in the future. This patch add the needed clocks into power-controller. As the discuess about all the device clocks being listed in the power-domains itself. There are several reasons as follows: Firstly, the clocks need be turned off to save power when the system enter the suspend state. So we need to enumerate the clocks in the dts. In order to power domain can turn on and off. Secondly, the reset-circuit should reset be synchronous on RK3288, then sync revoked. So we need to enable clocks of all devices. In other words, we have to enable the clocks before you operate them if all the device clocks are included in someone domians. Thirdly, as the chip designs for PM hardhare. we need turn on the noc clocks, if we are operating the "pd_vio" domain to enter the idle status. The device's clock be included in domains that needed turn on if do that. The clocks in the dts are needed to enable before you want to happy work. At the moment, This patch is very good work for PM hardware. Also, we can add these clocks in the future if we have some hidden clocks. Signed-off-by: Caesar Wang Reviewed-by: Michael Turquette Reviewed-by: Kevin Hilman [add necessary power-domain properties to keep drm subsys working] Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 98 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 97 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index a12e654504bc..d6c2f9116646 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -44,6 +44,7 @@ #include #include #include +#include #include "skeleton.dtsi" / { @@ -613,8 +614,98 @@ }; pmu: power-management@ff730000 { - compatible = "rockchip,rk3288-pmu", "syscon"; + compatible = "rockchip,rk3288-pmu", "syscon", "simple-mfd"; reg = <0xff730000 0x100>; + + power: power-controller { + compatible = "rockchip,rk3288-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + /* + * Note: Although SCLK_* are the working clocks + * of device without including on the NOC, needed for + * synchronous reset. + * + * The clocks on the which NOC: + * ACLK_IEP/ACLK_VIP/ACLK_VOP0 are on ACLK_VIO0_NIU. + * ACLK_ISP/ACLK_VOP1 are on ACLK_VIO1_NIU. + * ACLK_RGA is on ACLK_RGA_NIU. + * The others (HCLK_*,PLCK_*) are on HCLK_VIO_NIU. + * + * Which clock are device clocks: + * clocks devices + * *_IEP IEP:Image Enhancement Processor + * *_ISP ISP:Image Signal Processing + * *_VIP VIP:Video Input Processor + * *_VOP* VOP:Visual Output Processor + * *_RGA RGA + * *_EDP* EDP + * *_LVDS_* LVDS + * *_HDMI HDMI + * *_MIPI_* MIPI + */ + pd_vio { + reg = ; + clocks = <&cru ACLK_IEP>, + <&cru ACLK_ISP>, + <&cru ACLK_RGA>, + <&cru ACLK_VIP>, + <&cru ACLK_VOP0>, + <&cru ACLK_VOP1>, + <&cru DCLK_VOP0>, + <&cru DCLK_VOP1>, + <&cru HCLK_IEP>, + <&cru HCLK_ISP>, + <&cru HCLK_RGA>, + <&cru HCLK_VIP>, + <&cru HCLK_VOP0>, + <&cru HCLK_VOP1>, + <&cru PCLK_EDP_CTRL>, + <&cru PCLK_HDMI_CTRL>, + <&cru PCLK_LVDS_PHY>, + <&cru PCLK_MIPI_CSI>, + <&cru PCLK_MIPI_DSI0>, + <&cru PCLK_MIPI_DSI1>, + <&cru SCLK_EDP_24M>, + <&cru SCLK_EDP>, + <&cru SCLK_ISP_JPE>, + <&cru SCLK_ISP>, + <&cru SCLK_RGA>; + }; + + /* + * Note: The following 3 are HEVC(H.265) clocks, + * and on the ACLK_HEVC_NIU (NOC). + */ + pd_hevc { + reg = ; + clocks = <&cru ACLK_HEVC>, + <&cru SCLK_HEVC_CABAC>, + <&cru SCLK_HEVC_CORE>; + }; + + /* + * Note: ACLK_VCODEC/HCLK_VCODEC are VCODEC + * (video endecoder & decoder) clocks that on the + * ACLK_VCODEC_NIU and HCLK_VCODEC_NIU (NOC). + */ + pd_video { + reg = ; + clocks = <&cru ACLK_VCODEC>, + <&cru HCLK_VCODEC>; + }; + + /* + * Note: ACLK_GPU is the GPU clock, + * and on the ACLK_GPU_NIU (NOC). + */ + pd_gpu { + reg = ; + clocks = <&cru ACLK_GPU>; + }; + }; }; sgrf: syscon@ff740000 { @@ -674,6 +765,7 @@ interrupts = ; clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; @@ -695,6 +787,7 @@ reg = <0xff930300 0x100>; interrupts = ; interrupt-names = "vopb_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -705,6 +798,7 @@ interrupts = ; clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; + power-domains = <&power RK3288_PD_VIO>; resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>; reset-names = "axi", "ahb", "dclk"; iommus = <&vopl_mmu>; @@ -726,6 +820,7 @@ reg = <0xff940300 0x100>; interrupts = ; interrupt-names = "vopl_mmu"; + power-domains = <&power RK3288_PD_VIO>; #iommu-cells = <0>; status = "disabled"; }; @@ -738,6 +833,7 @@ interrupts = ; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>; clock-names = "iahb", "isfr"; + power-domains = <&power RK3288_PD_VIO>; status = "disabled"; ports { -- cgit v1.2.3-70-g09d2 From 45b0ef05588a65cf1f2d1ef6335544075b16278e Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Fri, 26 Jun 2015 14:50:18 -0700 Subject: ARM: dts: msm8974: Add smd, rpm and regulator nodes Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 74 +++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index ab8e57250468..f6791269dc65 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -114,6 +114,11 @@ <0xf9002000 0x1000>; }; + apcs: syscon@f9011000 { + compatible = "syscon"; + reg = <0xf9011000 0x1000>; + }; + timer@f9020000 { #address-cells = <1>; #size-cells = <1>; @@ -334,4 +339,73 @@ #interrupt-cells = <4>; }; }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = <0 168 1>; + qcom,ipc = <&apcs 8 0>; + qcom,smd-edge = <15>; + + rpm_requests { + compatible = "qcom,rpm-msm8974"; + qcom,smd-channels = "rpm_requests"; + + pm8841-regulators { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 {}; + pm8841_s2: s2 {}; + pm8841_s3: s3 {}; + pm8841_s4: s4 {}; + pm8841_s5: s5 {}; + pm8841_s6: s6 {}; + pm8841_s7: s7 {}; + pm8841_s8: s8 {}; + }; + + pm8941-regulators { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 {}; + pm8941_s2: s2 {}; + pm8941_s3: s3 {}; + pm8941_5v: s4 {}; + + pm8941_l1: l1 {}; + pm8941_l2: l2 {}; + pm8941_l3: l3 {}; + pm8941_l4: l4 {}; + pm8941_l5: l5 {}; + pm8941_l6: l6 {}; + pm8941_l7: l7 {}; + pm8941_l8: l8 {}; + pm8941_l9: l9 {}; + pm8941_l10: l10 {}; + pm8941_l11: l11 {}; + pm8941_l12: l12 {}; + pm8941_l13: l13 {}; + pm8941_l14: l14 {}; + pm8941_l15: l15 {}; + pm8941_l16: l16 {}; + pm8941_l17: l17 {}; + pm8941_l18: l18 {}; + pm8941_l19: l19 {}; + pm8941_l20: l20 {}; + pm8941_l21: l21 {}; + pm8941_l22: l22 {}; + pm8941_l23: l23 {}; + pm8941_l24: l24 {}; + + pm8941_lvs1: lvs1 {}; + pm8941_lvs2: lvs2 {}; + pm8941_lvs3: lvs3 {}; + + pm8941_5vs1: 5vs1 {}; + pm8941_5vs2: 5vs2 {}; + }; + }; + }; + }; }; -- cgit v1.2.3-70-g09d2 From d6b940395e430a9afd89131d5de8d7ab1c22f5d1 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 9 Oct 2015 00:44:18 +0300 Subject: ARM: shmobile: porter: add I2C2 DT support Define the Porter board dependent part of the I2C2 device node. This patch is analogous to the commit 29a647c396a0 ("ARM: shmobile: henninger: add I2C2 DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 7f46980ffd12..03edb8424ef5 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -109,6 +109,11 @@ renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; + + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; }; &scif0 { @@ -155,6 +160,14 @@ status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + &sata0 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 778f2e7a7b75e643fb56151797b7d950305b48ea Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 9 Oct 2015 00:45:49 +0300 Subject: ARM: shmobile: porter: add VIN0/ADV7180 DT support Define the Porter board dependent part of the VIN0 device node. Add the device node for Analog Devices ADV7180 video decoder to I2C2 bus. Add the necessary subnodes to interconnect VIN0 and ADV7180 devices. This patch is analogous to the commit 8d62f4f75320 ("ARM: shmobile: henninger: add VIN0/ADV7180 DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 03edb8424ef5..b7fa8261e02f 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -114,6 +114,11 @@ renesas,groups = "i2c2"; renesas,function = "i2c2"; }; + + vin0_pins: vin0 { + renesas,groups = "vin0_data8", "vin0_clk"; + renesas,function = "vin0"; + }; }; &scif0 { @@ -166,8 +171,38 @@ status = "okay"; clock-frequency = <400000>; + + composite-in@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin0>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin0ep>; + }; + }; + }; }; &sata0 { status = "okay"; }; + +/* composite video input */ +&vin0 { + status = "ok"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From ff9a6262b9b87204146427a3abefc73ab990c21f Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 3 Jun 2015 14:18:21 +0100 Subject: arm64: dts: add SRAM, MHU mailbox and SCPI support on Juno This patch adds support for the MHU mailbox peripheral used on Juno by application processors to communicate with remote SCP handling most of the CPU/system power management. It also adds the SRAM reserving the shared memory and SCPI message protocol using that shared memory. Signed-off-by: Sudeep Holla Acked-by: Liviu Dudau Cc: Jon Medhurst (Tixy) --- arch/arm64/boot/dts/arm/juno-base.dtsi | 54 ++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index e3ee96036eca..c624208edef6 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -17,6 +17,18 @@ }; }; + mailbox: mhu@2b1f0000 { + compatible = "arm,mhu", "arm,primecell"; + reg = <0x0 0x2b1f0000 0x0 0x1000>; + interrupts = , + ; + interrupt-names = "mhu_lpri_rx", + "mhu_hpri_rx"; + #mbox-cells = <1>; + clocks = <&soc_refclk100mhz>; + clock-names = "apb_pclk"; + }; + gic: interrupt-controller@2c010000 { compatible = "arm,gic-400", "arm,cortex-a15-gic"; reg = <0x0 0x2c010000 0 0x1000>, @@ -44,6 +56,48 @@ ; }; + sram: sram@2e000000 { + compatible = "arm,juno-sram-ns", "mmio-sram"; + reg = <0x0 0x2e000000 0x0 0x8000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x0 0x2e000000 0x8000>; + + cpu_scp_lpri: scp-shmem@0 { + compatible = "arm,juno-scp-shmem"; + reg = <0x0 0x200>; + }; + + cpu_scp_hpri: scp-shmem@200 { + compatible = "arm,juno-scp-shmem"; + reg = <0x200 0x200>; + }; + }; + + scpi { + compatible = "arm,scpi"; + mboxes = <&mailbox 1>; + shmem = <&cpu_scp_hpri>; + + clocks { + compatible = "arm,scpi-clocks"; + + scpi_dvfs: scpi_clocks@0 { + compatible = "arm,scpi-dvfs-clocks"; + #clock-cells = <1>; + clock-indices = <0>, <1>, <2>; + clock-output-names = "atlclk", "aplclk","gpuclk"; + }; + scpi_clk: scpi_clocks@3 { + compatible = "arm,scpi-variable-clocks"; + #clock-cells = <1>; + clock-indices = <3>, <4>; + clock-output-names = "pxlclk0", "pxlclk1"; + }; + }; + }; + /include/ "juno-clocks.dtsi" dma@7ff00000 { -- cgit v1.2.3-70-g09d2 From 050c69e8769b00645d6723390de6092c9dfcf746 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 3 Jun 2015 14:31:49 +0100 Subject: arm64: dts: add CPU topology on Juno This patch adds CPU topology on Juno. It will be useful for ther other IP blocks depending on this topology. Signed-off-by: Sudeep Holla Acked-by: Liviu Dudau Cc: Jon Medhurst (Tixy) --- arch/arm64/boot/dts/arm/juno-r1.dts | 26 ++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno.dts | 26 ++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index c62751153a4f..69130840c6cd 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -34,6 +34,32 @@ #address-cells = <2>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index d7cbdd482a61..ce1128a54c8d 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -34,6 +34,32 @@ #address-cells = <2>; #size-cells = <0>; + cpu-map { + cluster0 { + core0 { + cpu = <&A57_0>; + }; + core1 { + cpu = <&A57_1>; + }; + }; + + cluster1 { + core0 { + cpu = <&A53_0>; + }; + core1 { + cpu = <&A53_1>; + }; + core2 { + cpu = <&A53_2>; + }; + core3 { + cpu = <&A53_3>; + }; + }; + }; + A57_0: cpu@0 { compatible = "arm,cortex-a57","arm,armv8"; reg = <0x0 0x0>; -- cgit v1.2.3-70-g09d2 From a738459888b361c10b585629b84b0d0e6e7cbb27 Mon Sep 17 00:00:00 2001 From: Sudeep Holla Date: Wed, 3 Jun 2015 14:40:56 +0100 Subject: arm64: dts: add clock support for all the cpus This patch adds the CPU clocks so that the CPU DVFS can be enabled. Signed-off-by: Sudeep Holla Acked-by: Liviu Dudau Cc: Jon Medhurst (Tixy) --- arch/arm64/boot/dts/arm/juno-r1.dts | 6 ++++++ arch/arm64/boot/dts/arm/juno.dts | 6 ++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index 69130840c6cd..5eef4aa0c532 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -66,6 +66,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A57_1: cpu@1 { @@ -74,6 +75,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A53_0: cpu@100 { @@ -82,6 +84,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_1: cpu@101 { @@ -90,6 +93,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_2: cpu@102 { @@ -98,6 +102,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_3: cpu@103 { @@ -106,6 +111,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A57_L2: l2-cache0 { diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index ce1128a54c8d..c02f880584e8 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts @@ -66,6 +66,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A57_1: cpu@1 { @@ -74,6 +75,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A57_L2>; + clocks = <&scpi_dvfs 0>; }; A53_0: cpu@100 { @@ -82,6 +84,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_1: cpu@101 { @@ -90,6 +93,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_2: cpu@102 { @@ -98,6 +102,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A53_3: cpu@103 { @@ -106,6 +111,7 @@ device_type = "cpu"; enable-method = "psci"; next-level-cache = <&A53_L2>; + clocks = <&scpi_dvfs 1>; }; A57_L2: l2-cache0 { -- cgit v1.2.3-70-g09d2 From dfacaf0e7cbe9f845459f3332f94cdbc368932af Mon Sep 17 00:00:00 2001 From: Punit Agrawal Date: Tue, 15 Sep 2015 17:51:01 +0100 Subject: arm64: dts: Add sensor node to Juno dt The SCP firmware on Juno provides access to SoC sensors via the SCPI. Add the sensor nodes to the device tree to enable this support. Signed-off-by: Punit Agrawal Cc: Rob Herring Cc: Mark Rutland Acked-by: Sudeep Holla Acked-by: Liviu Dudau --- arch/arm64/boot/dts/arm/juno-base.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index c624208edef6..dd5158eb5872 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi @@ -96,6 +96,11 @@ clock-output-names = "pxlclk0", "pxlclk1"; }; }; + + scpi_sensors0: sensors { + compatible = "arm,scpi-sensors"; + #thermal-sensor-cells = <1>; + }; }; /include/ "juno-clocks.dtsi" -- cgit v1.2.3-70-g09d2 From 35c99ec93245f94022fdcc226826bb2f89e961d9 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:58 +0200 Subject: ARM: mvebu: add crypto related nodes to armada 38x dtsi Add crypto related nodes in armada-38x.dtsi. [gregory.clement@free-electrons.com: Fix typo for compatible string armada38x instead of armada375] Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-38x.dtsi | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index f9f2347d9995..c6a0e9d7f1a9 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -509,6 +509,21 @@ clocks = <&gateclk 4>; }; + crypto@90000 { + compatible = "marvell,armada-38x-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = , + ; + clocks = <&gateclk 23>, <&gateclk 21>, + <&gateclk 14>, <&gateclk 16>; + clock-names = "cesa0", "cesa1", + "cesaz0", "cesaz1"; + marvell,crypto-srams = <&crypto_sram0>, + <&crypto_sram1>; + marvell,crypto-sram-size = <0x800>; + }; + rtc@a3800 { compatible = "marvell,armada-380-rtc"; reg = <0xa3800 0x20>, <0x184a0 0x0c>; @@ -584,6 +599,24 @@ status = "disabled"; }; }; + + crypto_sram0: sa-sram0 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 23>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>; + }; + + crypto_sram1: sa-sram1 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gateclk 21>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>; + }; }; clocks { -- cgit v1.2.3-70-g09d2 From d716f2e837ac6cdf3244130ca3abc1e560048941 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:08:59 +0200 Subject: ARM: mvebu: define crypto SRAM ranges for all armada-38x boards Define the crypto SRAM ranges so that the resources referenced by the sa-sram node can be properly extracted from the DT. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-385-db-ap.dts | 4 +++- arch/arm/boot/dts/armada-385-linksys.dtsi | 4 +++- arch/arm/boot/dts/armada-388-db.dts | 4 +++- arch/arm/boot/dts/armada-388-gp.dts | 4 +++- arch/arm/boot/dts/armada-388-rd.dts | 4 +++- 5 files changed, 15 insertions(+), 5 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 89f5a95954ed..4de813c236bf 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -59,7 +59,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi1: spi@10680 { diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 74a9c6b54fa7..3710755c6d76 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -57,7 +57,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x09) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x05) 0 0xf1110000 0x10000>; internal-regs { diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index 91ac8c118f37..ff47af57f091 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -64,7 +64,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 353c92532e7a..4baac9329f3d 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -58,7 +58,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index b657b1687e5f..853f9735cc70 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -65,7 +65,9 @@ soc { ranges = ; + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { spi@10600 { -- cgit v1.2.3-70-g09d2 From eb69e001983d16f5897ad0b0c8e15d06eecab01d Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:09:00 +0200 Subject: ARM: mvebu: use new bindings for existing crypto devices The new bindings split the crypto and sram node in two separate devices. Modify the existing crypto nodes to match the new representation. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/dove.dtsi | 15 ++++++++++++--- arch/arm/boot/dts/kirkwood.dtsi | 29 +++++++++++++++++++---------- arch/arm/boot/dts/orion5x.dtsi | 22 +++++++++++++++------- 3 files changed, 46 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 179121630ad7..9bb31314f5e9 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -264,11 +264,12 @@ crypto: crypto-engine@30000 { compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xffffe000 0x800>; - reg-names = "regs", "sram"; + reg = <0x30000 0x10000>; + reg-names = "regs"; interrupts = <31>; clocks = <&gate_clk 15>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; status = "okay"; }; @@ -767,6 +768,14 @@ interrupts = <47>; status = "disabled"; }; + + crypto_sram: sa-sram@ffffe000 { + compatible = "mmio-sram"; + reg = <0xffffe000 0x800>; + clocks = <&gate_clk 15>; + #address-cells = <1>; + #size-cells = <1>; + }; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 464f09a1a4a5..c5f913b5fe42 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,16 +40,6 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - cesa: crypto@0301 { - compatible = "marvell,orion-crypto"; - reg = , - ; - reg-names = "regs", "sram"; - interrupts = <22>; - clocks = <&gate_clk 17>; - status = "okay"; - }; - nand: nand@012f { #address-cells = <1>; #size-cells = <1>; @@ -65,6 +55,14 @@ pinctrl-names = "default"; status = "disabled"; }; + + crypto_sram: sa-sram@0301 { + compatible = "mmio-sram"; + reg = ; + clocks = <&gate_clk 17>; + #address-cells = <1>; + #size-cells = <1>; + }; }; ocp@f1000000 { @@ -252,6 +250,17 @@ status = "okay"; }; + cesa: crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>; + reg-names = "regs"; + interrupts = <22>; + clocks = <&gate_clk 17>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index 75cd01bd6024..e1b6d2a2ac49 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -212,6 +212,16 @@ status = "disabled"; }; + cesa: crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>; + reg-names = "regs"; + interrupts = <28>; + marvell,crypto-srams = <&crypto_sram>; + marvell,crypto-sram-size = <0x800>; + status = "okay"; + }; + ehci1: ehci@a0000 { compatible = "marvell,orion-ehci"; reg = <0xa0000 0x1000>; @@ -220,13 +230,11 @@ }; }; - cesa: crypto@90000 { - compatible = "marvell,orion-crypto"; - reg = , - ; - reg-names = "regs", "sram"; - interrupts = <28>; - status = "okay"; + crypto_sram: sa-sram { + compatible = "mmio-sram"; + reg = ; + #address-cells = <1>; + #size-cells = <1>; }; }; }; -- cgit v1.2.3-70-g09d2 From 9b24a35cb59888194706825b9c5ac550b0880277 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Tue, 18 Aug 2015 10:09:01 +0200 Subject: ARM: mvebu: modify Orion and Kirkwoord crypto compatible strings Explicitly use the SoC specific compatible strings in kirkwood.dtsi and dove.dtsi, so that the crypto devices have access to the TDMA feature when attached to the new CESA driver. Signed-off-by: Boris Brezillon Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/dove.dtsi | 2 +- arch/arm/boot/dts/kirkwood.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 9bb31314f5e9..cd58c2e62757 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -263,7 +263,7 @@ }; crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; + compatible = "marvell,dove-crypto"; reg = <0x30000 0x10000>; reg-names = "regs"; interrupts = <31>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index c5f913b5fe42..7b5a4a18f49c 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -251,7 +251,7 @@ }; cesa: crypto@30000 { - compatible = "marvell,orion-crypto"; + compatible = "marvell,kirkwood-crypto"; reg = <0x30000 0x10000>; reg-names = "regs"; interrupts = <22>; -- cgit v1.2.3-70-g09d2 From 14317946d1da07424dec5d6be3459c393bdf578d Mon Sep 17 00:00:00 2001 From: Wei Xu Date: Fri, 25 Sep 2015 18:22:35 +0100 Subject: ARM: hisilicon: DT: Drop console= and earlyprintk bootargs parameter Replace console with stdout-path so that we don't have to put the console on the kernel command line. Remove earlyprintk to allow the kernel to boot on a system even if DEBUG_LL is configured for another system. Signed-off-by: Wei Xu --- arch/arm/boot/dts/hi3620-hi4511.dts | 3 ++- arch/arm/boot/dts/hisi-x5hd2-dkb.dts | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts index fe623928f687..a579fbf13b5f 100644 --- a/arch/arm/boot/dts/hi3620-hi4511.dts +++ b/arch/arm/boot/dts/hi3620-hi4511.dts @@ -16,7 +16,8 @@ compatible = "hisilicon,hi3620-hi4511"; chosen { - bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk"; + bootargs = "root=/dev/ram0"; + stdout-path = "serial0:115200n8"; }; memory { diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts index 721b09238f58..d13af8437d10 100644 --- a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -15,7 +15,7 @@ compatible = "hisilicon,hix5hd2"; chosen { - bootargs = "console=ttyAMA0,115200 earlyprintk"; + stdout-path = "serial0:115200n8"; }; cpus { -- cgit v1.2.3-70-g09d2 From a15b80fb0ad7ddab8d2668392cce3c12aff594bd Mon Sep 17 00:00:00 2001 From: Timo Sigurdsson Date: Thu, 8 Oct 2015 00:18:36 +0200 Subject: ARM: dts: sunxi: Add regulators for LeMaker BananaPi sun7i-a20-bananapi.dts doesn't contain regulator nodes for the AXP209 PMU driver, so add them to allow for voltage-scaling with cpufreq-dt. Also add board-specific OPP to use slightly higher voltages at lower frequencies since Kevin Hilman reported that not all BananaPi boards run stable at the default voltages inherited by sun7i-a20.dtsi. Signed-off-by: Timo Sigurdsson Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 45 +++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 9f7b472e6725..39b6b67bf94b 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -92,6 +92,20 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; + operating-points = < + /* kHz uV */ + 960000 1400000 + 912000 1400000 + 864000 1350000 + 720000 1250000 + 528000 1150000 + 312000 1100000 + 144000 1050000 + >; +}; + &ehci0 { status = "okay"; }; @@ -119,13 +133,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -182,6 +192,33 @@ }; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_usb1_vbus { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From dcfd8443d89f593e0c667a988ab017e716b33061 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 22 Sep 2015 15:36:01 +0200 Subject: ARM: dts: sun7i: Enable USB DRC on Bananapi Enable the otg/drc usb controller on the Bananapi. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-bananapi.dts | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index 39b6b67bf94b..fd7594ff90d5 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -169,7 +169,18 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { allwinner,pins = "PH10"; allwinner,function = "gpio_in"; @@ -219,6 +230,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; }; @@ -253,7 +268,21 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 96521b72005feb41dfd014aced0ee6fba3ac0f58 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Fri, 9 Oct 2015 14:09:37 +0300 Subject: ARM: dts: sun4i: Allow to use the PH6 pin for GPIO on pcDuino1/2 The pcDuino1 board does not use any power switches at all for its two USB host ports and the VBUS pins are always connected to 5V. The pcDuino2 board uses the RT9701GB power switch for its single USB host port, but the USB_EN pin (PD2) is pulled up with a 10K resistor. So that the USB power is still enabled by default, resulting in the same behaviour as pcDuino1 if nobody touches the PD2 pin. This minor difference is going to be handled in a follow-up patch, introducing a separate dts file for pcDuino2. The primary reason for this fix is that the current dts file unnecessarily meddles with the PH3 and PH6 pins. But the PH6 pin is available on the Arduino-compatible expansion header and may have a better use for other purposes. This patch fixes the problem and now the PH6 pin can be used with the GPIO sysfs interface. Tested on a pcDuino2 board with a multimeter: echo 230 > /sys/class/gpio/export echo "out" > /sys/class/gpio/gpio230/direction echo 0 > /sys/class/gpio/gpio230/value echo 1 > /sys/class/gpio/gpio230/value USB still works as expected too. Signed-off-by: Siarhei Siamashka Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index c882421d08ff..0b45d2742177 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -180,14 +180,6 @@ }; }; -®_usb1_vbus { - status = "okay"; -}; - -®_usb2_vbus { - status = "okay"; -}; - #include "axp209.dtsi" ®_dcdc2 { @@ -222,7 +214,7 @@ }; &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ + usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; }; -- cgit v1.2.3-70-g09d2 From d6f17def06c461d3ad69caaac720ad1e552595e0 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Fri, 9 Oct 2015 14:09:38 +0300 Subject: ARM: sun4i: dt: Add new LinkSprite pcDuino2 board The LinkSprite pcDuino2 board is almost identical to the older LinkSprite pcDuino1 board according to the schematic pdf files. So we just include the existing "sun4i-a10-pcduino.dts" file and make the necessary adjustments. Signed-off-by: Siarhei Siamashka Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun4i-a10-pcduino2.dts | 78 ++++++++++++++++++++++++++++++++ 2 files changed, 80 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun4i-a10-pcduino2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 342ab3116feb..c10d5aae00e0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -587,7 +587,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-mk802.dtb \ sun4i-a10-mk802ii.dtb \ sun4i-a10-olinuxino-lime.dtb \ - sun4i-a10-pcduino.dtb + sun4i-a10-pcduino.dtb \ + sun4i-a10-pcduino2.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino2.dts b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts new file mode 100644 index 000000000000..de483a1bf36a --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pcduino2.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2015 Siarhei Siamashka + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * The LinkSprite pcDuino2 board is almost identical to the older + * LinkSprite pcDuino1 board. The only software visible difference + * is that the pcDuino2 board got a USB VBUS voltage regulator, which + * is controlled by the PD2 pin (pulled-up by default). Also one of + * the USB host ports has been replaced with a USB WIFI chip. + */ + +#include "sun4i-a10-pcduino.dts" + +/ { + model = "LinkSprite pcDuino2"; + compatible = "linksprite,a10-pcduino2", "allwinner,sun4i-a10"; +}; + +&pio { + usb2_vbus_pin_pcduino2: usb2_vbus_pin@0 { + allwinner,pins = "PD2"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_usb2_vbus { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_vbus_pin_pcduino2>; + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_vcc3v3>; /* USB WIFI is always on */ + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 5d0c8b190a109e2ef17025aa0b341787ccddfc25 Mon Sep 17 00:00:00 2001 From: Siarhei Siamashka Date: Fri, 9 Oct 2015 14:09:39 +0300 Subject: ARM: dts: sun4i: Enable USB DRC on pcDuino1/2 Enable the otg/drc usb controller on the pcDuino1/2 board. Note that the pcDuino1 FEX file from the vendor contains the following information in the [usbc0] section: usb_id_gpio = port:PH04<0><1> usb_det_vbus_gpio = port:PH05<0><0> usb_drv_vbus_gpio = port:PB09<1><0><0> While the pcDuino2 FEX has: usb_id_gpio = port:PH04<0><1> usb_det_vbus_gpio = port:PH05<0><0> usb_drv_vbus_gpio = port:PD02<1><0><0> The ID pin is indeed PH4. The PD2 pin can be used to switch power on/off for the USB Type A receptacle on pcDuino2, but it has nothing to do with the MicroUSB OTG receptacle. The VBUS pin of the MicroUSB receptacle is always connected to 5V according to the schematics (both pcDuino1 and pcDuino2) and confirmed by doing some tests on pcDuino2. The PH5 pin is just one of the pins on the J8 expansion header and has nothing to do with USB OTG. The PB9 pin is pulled up and connected to the N_VBUSEN pin of AXP209 PMIC, while the VBUS pin of AXP209 only has a capacitor between it and the ground (this pin is not used for anything else). To sum it up. Only the ID pin (PH4) has a real use. And 5V voltage is always served to the MicroUSB OTG receptacle no matter what is the state of the PB9/PD2 pins. This patch has been tested on pcDuino2 to work fine in a host role with a USB keyboard connected via an OTG cable. It also works fine in a device role (cdc_ether) with a regular Micro-B cable connected to a desktop PC. Signed-off-by: Siarhei Siamashka Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-pcduino.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 0b45d2742177..39034aa8e1ae 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -164,6 +164,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { led_pins_pcduino: led_pins@0 { allwinner,pins = "PH15", "PH16"; @@ -178,6 +182,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; }; #include "axp209.dtsi" @@ -213,7 +224,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_vcc5v0>; /* USB1 VBUS is always on */ usb2_vbus-supply = <®_vcc5v0>; /* USB2 VBUS is always on */ status = "okay"; -- cgit v1.2.3-70-g09d2 From 49e4f3c3271e7eff2800596ba168c932d7d702b8 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 18 Sep 2015 09:09:34 +0200 Subject: ARM: sun5i: Add R8 DTSI The R8 is very close to the A13, but it still has a few differences, notably a composite output, which the A13 lacks. Add a DTSI based on the A13's to hold those differences. Signed-off-by: Maxime Ripard Reviewed-by: Chen-Yu Tsai Reviewed-by: Hans de Goede --- arch/arm/boot/dts/sun5i-r8.dtsi | 59 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) create mode 100644 arch/arm/boot/dts/sun5i-r8.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-r8.dtsi b/arch/arm/boot/dts/sun5i-r8.dtsi new file mode 100644 index 000000000000..0ef865601ac9 --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8.dtsi @@ -0,0 +1,59 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun5i-a13.dtsi" + +/ { + chosen { + framebuffer@1 { + compatible = "allwinner,simple-framebuffer", + "simple-framebuffer"; + allwinner,pipeline = "de_be0-lcd0-tve0"; + clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>, + <&ahb_gates 44>; + status = "disabled"; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 6ef8c8bf4c05028407ae75173f5790e5957640d2 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 22 Jun 2015 11:56:09 +0200 Subject: ARM: sun5i: dt: Move uart3 pinctrl node to common DTSI The uart3 pins are shared between the A10s and A13, move the pinctrl node to the common DTSI to avoid duplication. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Reviewed-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i-a10s.dtsi | 7 ------- arch/arm/boot/dts/sun5i.dtsi | 7 +++++++ 2 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 0fdabe8eb9e8..2ebd32f5bc6e 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -204,13 +204,6 @@ allwinner,pull = ; }; - uart3_pins_a: uart3@0 { - allwinner,pins = "PG9", "PG10"; - allwinner,function = "uart3"; - allwinner,drive = ; - allwinner,pull = ; - }; - emac_pins_a: emac0@0 { allwinner,pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 78b993abbaa3..433c83a321ca 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -529,6 +529,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + uart3_pins_a: uart3@0 { + allwinner,pins = "PG9", "PG10"; + allwinner,function = "uart3"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { -- cgit v1.2.3-70-g09d2 From eeea0fa3c5ae45ea905fbf244291ec5440756fa1 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 22 Jun 2015 12:00:30 +0200 Subject: ARM: sun5i: dt: Add UART3 CTS and RTS pins Add a separate pinctrl node for the UART3 CTS and RTS pins shared between the A10s and A13. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Reviewed-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 433c83a321ca..7d355e52efe2 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -536,6 +536,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + uart3_pins_cts_rts_a: uart3-cts-rts@0 { + allwinner,pins = "PG11", "PG12"; + allwinner,function = "uart3"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { -- cgit v1.2.3-70-g09d2 From b3f3db9c39779e1ee0926d369adab78698aef267 Mon Sep 17 00:00:00 2001 From: Adam Sampson Date: Sat, 10 Oct 2015 13:52:52 +0100 Subject: ARM: dts: sun7i: Correct USB regulators on pcDuino v3 Nano The LinkSprite pcDuino v3 Nano's two USB host ports are powered by a single RT9701GB regulator, which has its enable input tied to the A20's PD2 pin, pulled up to 3v3 via a 10k resistor. However, the script.bin that shipped with the device listed PH11 and PH3 as Vbus control pins for the two USB ports. Neither of these are actually connected to anything. Siarhei Siamashka spotted this problem while reviewing the other LinkSprite boards. This patch fixes it by only defining a single regulator, controlled by PD2. Testing shows that the USB ports are now (correctly) only powered up once the USB PHY driver is loaded. Reported-by: Siarhei Siamashka Signed-off-by: Adam Sampson Reviewed-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index 5361fce26b45..b3047783eb97 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -158,7 +158,7 @@ }; usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { - allwinner,pins = "PH11"; + allwinner,pins = "PD2"; allwinner,function = "gpio_out"; allwinner,drive = ; allwinner,pull = ; @@ -171,13 +171,10 @@ status = "okay"; }; +/* A single regulator (U24) powers both USB host ports. */ ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; - gpio = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ - status = "okay"; -}; - -®_usb2_vbus { + gpio = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ status = "okay"; }; @@ -189,6 +186,6 @@ &usbphy { usb1_vbus-supply = <®_usb1_vbus>; - usb2_vbus-supply = <®_usb2_vbus>; + usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 2685a2cefe6bcd17e6b407799f41369c7dad422d Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 10 Oct 2015 00:40:31 +0300 Subject: ARM: shmobile: porter: add QSPI DT support Define the Porter board dependent part of the QSPI device node. Add device nodes for Spansion S25FL512S SPI flash and the MTD partitions on it. This patch is mostly analogous to the commit f59838d44835 ("ARM: shmobile: henninger: add QSPI DT support") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 38 ++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index b7fa8261e02f..4eebc67773d2 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -110,6 +110,11 @@ renesas,function = "sdhi2"; }; + qspi_pins: spi0 { + renesas,groups = "qspi_ctrl", "qspi_data4"; + renesas,function = "qspi"; + }; + i2c2_pins: i2c2 { renesas,groups = "i2c2"; renesas,function = "i2c2"; @@ -165,6 +170,39 @@ status = "okay"; }; +&qspi { + pinctrl-0 = <&qspi_pins>; + pinctrl-names = "default"; + + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl512s", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <30000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + m25p,fast-read; + + partition@0 { + label = "loader_prg"; + reg = <0x00000000 0x00040000>; + read-only; + }; + partition@40000 { + label = "user_prg"; + reg = <0x00040000 0x00400000>; + read-only; + }; + partition@440000 { + label = "flash_fs"; + reg = <0x00440000 0x03bc0000>; + }; + }; +}; + &i2c2 { pinctrl-0 = <&i2c2_pins>; pinctrl-names = "default"; -- cgit v1.2.3-70-g09d2 From f9953c5e2a84ffc309ca5f6a281528907a3c8a39 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 10 Oct 2015 00:41:26 +0300 Subject: ARM: shmobile: porter: enable PCIe Enable the PCIe controller and clock for the Porter board. This patch is analogous to the commit 485f3ce67c11 ("ARM: shmobile: henninger: Enable PCIe Controller & PCIe bus clock") as there are no differences between the boards in this respect. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index 4eebc67773d2..c46aad3954f4 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -244,3 +244,11 @@ }; }; }; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From cf09d7b0762c8fd225f0808bb85f573254ad5b54 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Oct 2015 22:48:57 +0800 Subject: ARM: dts: sunxi: Add dtsi for AXP22x PMIC The AXP22x family of PMIC is used with some Allwinner SoCs. This includes the AXP221, AXP221s and AXP223. They differ in the host interface, maximum supply current for DCDC1 regulator, and default voltage and state for various LDO regulators. Also, the AXP221s does not support fine calibration of the battery fuel gauge. This patch adds a dtsi file for all the common bindings for these PMICs. Currently this is just listing all the regulator nodes. The regulators are initialized based on their device node names. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/axp22x.dtsi | 143 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 143 insertions(+) create mode 100644 arch/arm/boot/dts/axp22x.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/axp22x.dtsi b/arch/arm/boot/dts/axp22x.dtsi new file mode 100644 index 000000000000..76302f58c478 --- /dev/null +++ b/arch/arm/boot/dts/axp22x.dtsi @@ -0,0 +1,143 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * AXP221/221s/223 Integrated Power Management Chip + * http://www.x-powers.com/product/AXP22X.php + * http://dl.linux-sunxi.org/AXP/AXP221%20Datasheet%20V1.2%2020130326%20.pdf + */ + +&axp22x { + interrupt-controller; + #interrupt-cells = <1>; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <3000>; + + reg_dcdc1: dcdc1 { + regulator-name = "dcdc1"; + }; + + reg_dcdc2: dcdc2 { + regulator-name = "dcdc2"; + }; + + reg_dcdc3: dcdc3 { + regulator-name = "dcdc3"; + }; + + reg_dcdc4: dcdc4 { + regulator-name = "dcdc4"; + }; + + reg_dcdc5: dcdc5 { + regulator-name = "dcdc5"; + }; + + reg_dc1sw: dc1sw { + regulator-name = "dc1sw"; + }; + + reg_dc5ldo: dc5ldo { + regulator-name = "dc5ldo"; + }; + + reg_aldo1: aldo1 { + regulator-name = "aldo1"; + }; + + reg_aldo2: aldo2 { + regulator-name = "aldo2"; + }; + + reg_aldo3: aldo3 { + regulator-name = "aldo3"; + }; + + reg_dldo1: dldo1 { + regulator-name = "dldo1"; + }; + + reg_dldo2: dldo2 { + regulator-name = "dldo2"; + }; + + reg_dldo3: dldo3 { + regulator-name = "dldo3"; + }; + + reg_dldo4: dldo4 { + regulator-name = "dldo4"; + }; + + reg_eldo1: eldo1 { + regulator-name = "eldo1"; + }; + + reg_eldo2: eldo2 { + regulator-name = "eldo2"; + }; + + reg_eldo3: eldo3 { + regulator-name = "eldo3"; + }; + + reg_ldo_io0: ldo_io0 { + regulator-name = "ldo_io0"; + }; + + reg_ldo_io1: ldo_io1 { + regulator-name = "ldo_io1"; + }; + + reg_rtc_ldo: rtc_ldo { + /* RTC_LDO is a fixed, always-on regulator */ + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "rtc_ldo"; + }; + }; +}; -- cgit v1.2.3-70-g09d2 From 465a225fb2afb3ebf1becbe76d46b084d46f30a5 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 9 Jun 2015 19:38:43 +0200 Subject: ARM: sun5i: Add C.H.I.P DTS The C.H.I.P. is a small SBC with an Allwinner R8, 8GB of NAND, 512MB of RAM, USB host and OTG, a wifi / bluetooth combo chip, an audio/video jack and two connectors to plug additional boards on top of it. Signed-off-by: Maxime Ripard Reviewed-by: Hans de Goede Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun5i-r8-chip.dts | 214 ++++++++++++++++++++++++++++++++++++ 2 files changed, 216 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun5i-r8-chip.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c10d5aae00e0..e76fe3a3f335 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -601,7 +601,8 @@ dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a13-olinuxino.dtb \ sun5i-a13-olinuxino-micro.dtb \ sun5i-a13-q8-tablet.dtb \ - sun5i-a13-utoo-p66.dtb + sun5i-a13-utoo-p66.dtb \ + sun5i-r8-chip.dtb dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts new file mode 100644 index 000000000000..abf3ccb1a82c --- /dev/null +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -0,0 +1,214 @@ +/* + * Copyright 2015 Free Electrons + * Copyright 2015 NextThing Co + * + * Maxime Ripard + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun5i-r8.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "NextThing C.H.I.P."; + compatible = "nextthing,chip", "allwinner,sun5i-r8"; + + aliases { + i2c0 = &i2c0; + i2c2 = &i2c2; + serial0 = &uart1; + serial1 = &uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + + /* + * The interrupt is routed through the "External Fast + * Interrupt Request" pin (ball G13 of the module) + * directly to the main interrupt controller, without + * any other controller interfering. + */ + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + xio: gpio@38 { + compatible = "nxp,pcf8574a"; + reg = <0x38>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&pio>; + interrupts = <6 0 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + chip_vbus_pin: chip_vbus_pin@0 { + allwinner,pins = "PB10"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + chip_id_det_pin: chip_id_det_pin@0 { + allwinner,pins = "PG2"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "cpuvdd"; + regulator-always-on; +}; + +®_dcdc3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1300000>; + regulator-name = "corevdd"; + regulator-always-on; +}; + +®_ldo1 { + regulator-name = "rtcvdd"; +}; + +®_ldo2 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; + regulator-always-on; +}; + +®_ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-1v8"; +}; + +®_usb0_vbus { + pinctrl-0 = <&chip_vbus_pin>; + vin-supply = <®_vcc5v0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */ + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins_a>, + <&uart3_pins_cts_rts_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&chip_id_det_pin>; + status = "okay"; + + usb0_id_det-gpio = <&pio 6 2 GPIO_ACTIVE_HIGH>; /* PG2 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_vcc5v0>; +}; -- cgit v1.2.3-70-g09d2 From 51763bd73ded2e95c5b8a65ed676df9cc5d735ff Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 11 Oct 2015 11:55:05 +0200 Subject: ARM: dts: sun5i: Add PWM controller node for A13 / A10s Add dts nodes for the PWM controller on the A13 / A10s. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-a10s.dtsi | 8 ++++++++ arch/arm/boot/dts/sun5i-a13.dtsi | 10 ++++++++++ 2 files changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index 2ebd32f5bc6e..bddd0de88af6 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -165,6 +165,14 @@ #size-cells = <0>; }; + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a10s-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index f3631c9c6fa2..d910d3a6c41c 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -150,6 +150,16 @@ "apb1_uart3"; }; }; + + soc@01c00000 { + pwm: pwm@01c20e00 { + compatible = "allwinner,sun5i-a13-pwm"; + reg = <0x01c20e00 0xc>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; }; &cpu0 { -- cgit v1.2.3-70-g09d2 From bb390193060fd35045919681153b057b75f61426 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 11 Oct 2015 11:55:06 +0200 Subject: ARM: dts: sun5i: Add PWM channel 0 pinmux setting for A13/A10s Add a pinmux setting for the first pwm channel. This is often used for backlight dimming on tablets. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 7d355e52efe2..9ffee9bb70a7 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -543,6 +543,13 @@ allwinner,drive = ; allwinner,pull = ; }; + + pwm0_pins: pwm0 { + allwinner,pins = "PB2"; + allwinner,function = "pwm"; + allwinner,drive = ; + allwinner,pull = ; + }; }; timer@01c20c00 { -- cgit v1.2.3-70-g09d2 From 6bf28cb995a525f090e2fb6370fb8717dbf57598 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 11 Oct 2015 11:55:07 +0200 Subject: ARM: dts: sunxi: Enable PWM controller on Q8 format tablets Q8 format tablets use channel 0 of the PWM controller for backlight dimming. Signed-off-by: Chen-Yu Tsai Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sunxi-q8-common.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sunxi-q8-common.dtsi b/arch/arm/boot/dts/sunxi-q8-common.dtsi index 17b26ffd03aa..b8241462fcea 100644 --- a/arch/arm/boot/dts/sunxi-q8-common.dtsi +++ b/arch/arm/boot/dts/sunxi-q8-common.dtsi @@ -75,3 +75,9 @@ voltage = <400000>; }; }; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 6fb2ffd737a1d5c06d878ff47a715d20cce78265 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 11 Oct 2015 11:55:08 +0200 Subject: ARM: dts: sun5i: Add backlight node to sun5i-q8-common.dtsi All A13 based q8 formfactor tablets use the same backlight setup, add a backlight devicetree node for controlling the backlight on these devices. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun5i-q8-common.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-q8-common.dtsi b/arch/arm/boot/dts/sun5i-q8-common.dtsi index 0641d68a6d82..a78e189f6653 100644 --- a/arch/arm/boot/dts/sun5i-q8-common.dtsi +++ b/arch/arm/boot/dts/sun5i-q8-common.dtsi @@ -41,11 +41,21 @@ */ #include "sunxi-q8-common.dtsi" +#include + / { aliases { serial0 = &uart1; }; + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>; + default-brightness-level = <8>; + /* TODO: backlight uses axp gpio1 as enable pin */ + }; + chosen { stdout-path = "serial0:115200n8"; }; -- cgit v1.2.3-70-g09d2 From 85a9efcd4e2902ddad251925d81386b0d28c1fb3 Mon Sep 17 00:00:00 2001 From: Vincent Donnefort Date: Tue, 6 Oct 2015 16:13:42 +0200 Subject: ARM: mvebu: add DT support for Seagate NAS 2 and 4-Bay This patch adds DT support for the Seagate NAS 2 and 4-Bay. Here are some information allowing to identify these devices: Product name | Seagate NAS 2-Bay | Seagate NAS 4-Bay Code name (board/PCB) | Dart 2-Bay | Dart 4-Bay Model name (case sticker) | SRPD20 | SRPD40 Material desc (product spec) | STCTxxxxxxx | STCUxxxxxxx Chipset list (common): - SoC Marvell Armada 370 88F6707, CPU @1.2GHz - SDRAM memory: 512MB DDR3 600MHz (16-bits bandwidth) - NAND flash 256MB, 8-bits (Micron MT29F2G08AAB or Hinyx H27U2G8F2CTR-BC) - 2 SATA II ports (SoC) - 1 Ethernet Gigabit ports (PHY Marvell 88E1518) - 2 USB3 host ports (PCIe controller ASM1042) - GPIO fan (4 speeds) - External I2C RTC (MCP7940NT) - 3 push buttons (power, backup and reset) - 2 SATA LEDs (bi-color, blue and red) - 1 power LED (bi-color, blue and red) Only on 4-Bay models: - 2 extra SATA III ports (PCIe AHCI controller Marvell 88SE9170) - 1 extra Ethernet Gigabit ports (PHY Marvell 88E1518) - I2C GPIO expander (PCA9554A) - 2 extra SATA LEDs (bi-color, blue and red) Note that support for the white SATA LEDs associated with HDDs 0 and 1 is missing. A dedicated LED driver is needed. Signed-off-by: Vincent Donnefort Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts | 36 ++++ arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts | 133 ++++++++++++ arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi | 231 +++++++++++++++++++++ 4 files changed, 402 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts create mode 100644 arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts create mode 100644 arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..4f89c35239c0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -702,6 +702,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-netgear-rn102.dtb \ armada-370-netgear-rn104.dtb \ armada-370-rd.dtb \ + armada-370-seagate-nas-2bay.dtb \ + armada-370-seagate-nas-4bay.dtb \ armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts new file mode 100644 index 000000000000..fef0110a8d8a --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-2bay.dts @@ -0,0 +1,36 @@ +/* + * Device Tree file for Seagate NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 2-Bay + * Code name (board/PCB) : Dart 2-Bay + * Model name (case sticker) : SRPD20 + * Material desc (product spec) : STCTxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" + +/ { + model = "Seagate NAS 2-Bay (Dart, SRPD20)"; + compatible = "seagate,dart-2", "marvell,armada370", "marvell,armada-370-xp"; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 950 2 + 1400 1 + 1800 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts new file mode 100644 index 000000000000..ae2e1fe50ef6 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-4bay.dts @@ -0,0 +1,133 @@ +/* + * Device Tree file for Seagate NAS 4-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate NAS 4-Bay + * Code name (board/PCB) : Dart 4-Bay + * Model name (case sticker) : SRPD40 + * Material desc (product spec) : STCUxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-nas-xbay.dtsi" +#include + +/ { + model = "Seagate NAS 4-Bay (Dart, SRPD40)"; + compatible = "seagate,dart-4", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + pcie-controller { + /* SATA AHCI controller 88SE9170 */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + /* I2C GPIO expander (PCA9554A) */ + pca9554: pca9554@21 { + compatible = "nxp,pca9554"; + reg = <0x21>; + #gpio-cells = <2>; + gpio-controller; + }; + }; + }; + }; + + regulators { + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "SATA2 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 6 GPIO_ACTIVE_HIGH>; + }; + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "SATA3 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&pca9554 7 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + red-sata2 { + label = "dart:red:sata2"; + gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; + }; + red-sata3 { + label = "dart:red:sata3"; + gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; + }; + }; + + leds-ns2 { + compatible = "lacie,ns2-leds"; + + white-sata2 { + label = "dart:white:sata2"; + cmd-gpio = <&pca9554 1 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 2 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = ; + }; + white-sata3 { + label = "dart:white:sata3"; + cmd-gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>; + slow-gpio = <&pca9554 5 GPIO_ACTIVE_HIGH>; + num-modes = <4>; + modes-map = ; + }; + }; + + gpio-fan { + gpio-fan,speed-map = + < 0 3 + 800 2 + 1050 1 + 1300 0>; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi new file mode 100644 index 000000000000..3036e25c5992 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-nas-xbay.dtsi @@ -0,0 +1,231 @@ +/* + * Device Tree common file for the Seagate NAS 2 and 4-bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Vincent Donnefort + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LEDs associated with HDD 0 and 1. + */ + +#include "armada-370.dtsi" +#include +#include + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* USB 3.0 bridge ASM1042A */ + pcie@2,0 { + status = "okay"; + }; + }; + + internal-regs { + serial@12000 { + status = "okay"; + }; + + sata@a0000 { + nr-ports = <2>; + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@70000 { + status = "okay"; + pinctrl-0 = <&ge0_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + i2c@11000 { + status = "okay"; + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + clock-frequency = <100000>; + + /* RTC - NXP 8563T (second source) */ + rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + interrupts = <110>; + }; + /* RTC - MCP7940NT */ + rtc@6f { + compatible = "microchip,mcp7941x"; + reg = <0x6f>; + interrupts = <110>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x300000>; + }; + partition@300000 { + label = "device-tree"; + reg = <0x300000 0x20000>; + }; + partition@320000 { + label = "linux"; + reg = <0x320000 0x2000000>; + }; + partition@2320000 { + label = "rootfs"; + reg = <0x2320000 0xdce0000>; + }; + }; + }; + + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio2 0 GPIO_ACTIVE_HIGH + &gpio2 1 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = ; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@2 { + label = "Backup button"; + linux,code = ; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + white-power { + label = "dart:white:power"; + gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "timer"; + + }; + red-power { + label = "dart:red:power"; + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; + }; + red-sata0 { + label = "dart:red:sata0"; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + red-sata1 { + label = "dart:red:sata1"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 30 GPIO_ACTIVE_LOW>; + }; +}; + +&pinctrl { + pinctrl-0 = <&hdd0_led_sata_pin>, <&hdd1_led_sata_pin>; + pinctrl-names = "default"; + + hdd0_led_sata_pin: hdd0-led-sata-pin { + marvell,pins = "mpp48"; + marvell,function = "sata1"; + }; + hdd0_led_gpio_pin: hdd0-led-gpio-pin { + marvell,pins = "mpp48"; + marvell,function = "gpio"; + }; + hdd1_led_sata_pin: hdd1-led-sata-pin { + marvell,pins = "mpp57"; + marvell,function = "sata0"; + }; + hdd1_led_gpio_pin: hdd1-led-gpio-pin { + marvell,pins = "mpp57"; + marvell,function = "gpio"; + }; +}; -- cgit v1.2.3-70-g09d2 From 0ac73f76addfc3816924f84e3227ddc7570cffbf Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Tue, 6 Oct 2015 16:13:43 +0200 Subject: ARM: mvebu: add DT support for Seagate Personal Cloud This patch adds DT support for the Seagate Personal Cloud 1 and 2-Bay. Here are some information allowing to identify these devices: Product name | Personal Cloud | Personal Cloud 2-Bay Code name (board/PCB) | Cumulus | Cumulus Max Model name (case sticker) | SRN21C | SRN22C Material desc (product spec) | STCRxxxxxxx | STCSxxxxxxx Chipset list: - SoC Marvell Armada 370 88F6707, CPU @1GHz - SDRAM memory: 512MB DDR3 667MHz (16-bits bandwidth) - SPI flash 1MB (Macronix MX25L8006E) - 1 or 2 SATA internal ports - 1 Ethernet Gigabit port (PHY Marvell 88E1518) - 1 USB3 host port (PCIe controller ASM1042) - 1 USB2 host port (SoC) - 2 push buttons (power and reset) - 1 SATA LED (bi-color, white and red) Note that support for the white SATA LED is missing. A dedicated LED driver is needed. Signed-off-by: Simon Guinot Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/Makefile | 2 + .../dts/armada-370-seagate-personal-cloud-2bay.dts | 51 ++++++ .../boot/dts/armada-370-seagate-personal-cloud.dts | 37 +++++ .../dts/armada-370-seagate-personal-cloud.dtsi | 178 +++++++++++++++++++++ 4 files changed, 268 insertions(+) create mode 100644 arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts create mode 100644 arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts create mode 100644 arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 4f89c35239c0..83c5105b7dc3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -704,6 +704,8 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ armada-370-rd.dtb \ armada-370-seagate-nas-2bay.dtb \ armada-370-seagate-nas-4bay.dtb \ + armada-370-seagate-personal-cloud.dtb \ + armada-370-seagate-personal-cloud-2bay.dtb \ armada-370-synology-ds213j.dtb dtb-$(CONFIG_MACH_ARMADA_375) += \ armada-375-db.dtb diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts new file mode 100644 index 000000000000..3c91f9821c89 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud-2bay.dts @@ -0,0 +1,51 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS 2-Bay (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud 2-Bay + * Code name (board/PCB) : Cumulus Max + * Model name (case sticker) : SRN22C + * Material desc (product spec) : STCSxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud 2-Bay (Cumulus, SRN22C)"; + compatible = "seagate,cumulus-max", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <2>; + }; + }; + }; + + regulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "SATA1 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 22 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts new file mode 100644 index 000000000000..aad39e97af43 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dts @@ -0,0 +1,37 @@ +/* + * Device Tree file for Seagate Personal Cloud NAS (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * Here are some information allowing to identify the device: + * + * Product name : Seagate Personal Cloud + * Code name (board/PCB) : Cumulus + * Model name (case sticker) : SRN21C + * Material desc (product spec) : STCRxxxxxxx + */ + +/dts-v1/; +#include "armada-370-seagate-personal-cloud.dtsi" + +/ { + model = "Seagate Personal Cloud (Cumulus, SRN21C)"; + compatible = "seagate,cumulus", "marvell,armada370", "marvell,armada-370-xp"; + + soc { + internal-regs { + sata@a0000 { + status = "okay"; + nr-ports = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi new file mode 100644 index 000000000000..1aba08e4377c --- /dev/null +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -0,0 +1,178 @@ +/* + * Device Tree common file for the Seagate Personal Cloud NAS 1 and 2-Bay + * (Armada 370 SoC). + * + * Copyright (C) 2015 Seagate + * + * Author: Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/* + * TODO: add support for the white SATA LED. + */ + +#include "armada-370.dtsi" +#include +#include + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* USB 3.0 Bridge ASM1042A */ + pcie@1,0 { + status = "okay"; + }; + }; + + internal-regs { + coherency-fabric@20200 { + broken-idle; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + + ethernet@74000 { + status = "okay"; + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + spi@10600 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; + }; + + usb@50000 { + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "USB Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; + }; + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "SATA0 power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + label = "Power button"; + linux,code = ; + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + button@3 { + label = "USB VBUS error"; + linux,code = ; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + debounce-interval = <100>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-sata0 { + label = "cumulus:red:sata0"; + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; +}; + +&pinctrl { + pinctrl-0 = <&sata_led_pin>; + pinctrl-names = "default"; + + sata_led_pin: sata-led-pin { + marvell,pins = "mpp60"; + marvell,function = "sata0"; + }; + gpio_led_pin: gpio-led-pin { + marvell,pins = "mpp60"; + marvell,function = "gpio"; + }; +}; -- cgit v1.2.3-70-g09d2 From 784693def2d36f525d2d259394fd39ac87fc4449 Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 10 Oct 2015 00:10:24 +0200 Subject: arm: mvebu: disable unused Armada RTC on ReadyNAS 102, 104 and 2120 By default, armada-370-xp.dtsi file has internal RTC enabled. NETGEAR ReadyNAS 102, 104 and 2120 all use an Intersil ISL12057 I2C RTC chip. The internal RTC not being disabled in the .dts files of those devices result in the following useless first line during boot: [ 4.500056] rtc-mv d0010300.rtc: internal RTC not ticking [ 4.505684] i2c /dev entries driver [ 4.513246] rtc-isl12057 0-0068: rtc core: registered rtc-isl12057 as rtc0 This patch marks Armada internal RTC as disabled in individual .dts files of those devices. Reported-by: TuxOholic Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-370-netgear-rn102.dts | 6 ++++++ arch/arm/boot/dts/armada-370-netgear-rn104.dts | 6 ++++++ arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 6 ++++++ 3 files changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index f43ee4a288cc..5555875f44f9 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -83,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index 4c240de1d9e1..78b563c02f3c 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -83,6 +83,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + serial@12000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 979fae9ec5b6..317d13784b80 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -90,6 +90,12 @@ }; internal-regs { + + /* RTC is provided by Intersil ISL12057 I2C RTC chip */ + rtc@10300 { + status = "disabled"; + }; + /* Two rear eSATA ports */ sata@a0000 { nr-ports = <2>; -- cgit v1.2.3-70-g09d2 From 2b63821e5b213ed09a044bf944d91e380549b2da Mon Sep 17 00:00:00 2001 From: Arnaud Ebalard Date: Sat, 10 Oct 2015 00:10:39 +0200 Subject: arm: mvebu: reorder nodes under internal-regs by address in RN2120 .dts file This cosmetic patch reorder nodes under internal-regs by increasing address order, as expected. Signed-off-by: Arnaud Ebalard Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-xp-netgear-rn2120.dts | 86 +++++++++++++------------- 1 file changed, 43 insertions(+), 43 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts index 317d13784b80..6fe8972de0a2 100644 --- a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -96,54 +96,11 @@ status = "disabled"; }; - /* Two rear eSATA ports */ - sata@a0000 { - nr-ports = <2>; - status = "okay"; - }; - - serial@12000 { - status = "okay"; - }; - - mdio { - phy0: ethernet-phy@0 { /* Marvell 88E1318 */ - reg = <0>; - }; - - phy1: ethernet-phy@1 { /* Marvell 88E1318 */ - reg = <1>; - }; - }; - - ethernet@70000 { - status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; - - ethernet@74000 { - status = "okay"; - phy = <&phy1>; - phy-mode = "rgmii-id"; - }; - - /* Front USB 2.0 port */ - usb@50000 { - status = "okay"; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; clock-frequency = <400000>; status = "okay"; - isl12057: isl12057@68 { - compatible = "isil,isl12057"; - reg = <0x68>; - isil,irq2-can-wakeup-machine; - }; - /* Controller for rear fan #1 of 3 (Protechnic * MGT4012XB-O20, 8000RPM) near eSATA port */ g762_fan1: g762@3e { @@ -180,6 +137,49 @@ compatible = "gmt,g751"; reg = <0x4c>; }; + + isl12057: isl12057@68 { + compatible = "isil,isl12057"; + reg = <0x68>; + isil,irq2-can-wakeup-machine; + }; + }; + + serial@12000 { + status = "okay"; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* Two rear eSATA ports */ + sata@a0000 { + nr-ports = <2>; + status = "okay"; }; nand@d0000 { -- cgit v1.2.3-70-g09d2 From d186a394bb98e9da199b72ce0498fb0f96832e17 Mon Sep 17 00:00:00 2001 From: Yingjoe Chen Date: Fri, 2 Oct 2015 23:19:40 +0800 Subject: ARM: dts: mt8135: enable basic SMP bringup for mt8135 Add arch timer node to enable arch-timer support. MT8135 firmware doesn't correctly setup arch-timer frequency and CNTVOFF, add properties to workaround this. This also set cpu enable-method to enable SMP. Signed-off-by: Yingjoe Chen Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8135.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mt8135.dtsi b/arch/arm/boot/dts/mt8135.dtsi index 08371dbae543..cb99b02d2ccc 100644 --- a/arch/arm/boot/dts/mt8135.dtsi +++ b/arch/arm/boot/dts/mt8135.dtsi @@ -46,6 +46,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu0: cpu@0 { device_type = "cpu"; @@ -72,6 +73,17 @@ }; }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -97,6 +109,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From 060646a218b357e758b3dc6bbce2865bd0aadd44 Mon Sep 17 00:00:00 2001 From: Yingjoe Chen Date: Fri, 2 Oct 2015 23:19:41 +0800 Subject: ARM: dts: mt8127: enable basic SMP bringup for mt8127 Add arch timer node to enable arch-timer support. MT8127 firmware doesn't correctly setup arch-timer frequency and CNTVOFF, add properties to workaround this. This also set cpu enable-method to enable SMP. Signed-off-by: Yingjoe Chen Signed-off-by: Matthias Brugger --- arch/arm/boot/dts/mt8127.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/mt8127.dtsi b/arch/arm/boot/dts/mt8127.dtsi index ca3402e8240b..52086c8018e2 100644 --- a/arch/arm/boot/dts/mt8127.dtsi +++ b/arch/arm/boot/dts/mt8127.dtsi @@ -23,6 +23,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "mediatek,mt81xx-tz-smp"; cpu@0 { device_type = "cpu"; @@ -47,6 +48,17 @@ }; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + trustzone-bootinfo@80002000 { + compatible = "mediatek,trustzone-bootinfo"; + reg = <0 0x80002000 0 0x1000>; + }; + }; + clocks { #address-cells = <2>; #size-cells = <2>; @@ -72,6 +84,21 @@ }; }; + timer { + compatible = "arm,armv7-timer"; + interrupt-parent = <&gic>; + interrupts = , + , + , + ; + clock-frequency = <13000000>; + arm,cpu-registers-not-fw-configured; + }; + soc { #address-cells = <2>; #size-cells = <2>; -- cgit v1.2.3-70-g09d2 From f95b1064b30a59d93a8df65284b770a2d774040f Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Tue, 18 Aug 2015 17:01:57 +0300 Subject: ARM: dts: am437x-gp-evm: Add DCAN sleep pins Add DCAN sleep pins to save some power during suspend. Signed-off-by: Roger Quadros Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 22038f21f228..f25d7a6134cd 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -304,6 +304,13 @@ >; }; + dcan0_sleep: dcan0_sleep_pins { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */ + 0x17c (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */ + >; + }; + dcan1_default: dcan1_default_pins { pinctrl-single,pins = < 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */ @@ -311,6 +318,13 @@ >; }; + dcan1_sleep: dcan1_sleep_pins { + pinctrl-single,pins = < + 0x180 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */ + 0x184 (PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */ + >; + }; + vpfe0_pins_default: vpfe0_pins_default { pinctrl-single,pins = < 0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/ @@ -886,14 +900,16 @@ }; &dcan0 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan0_default>; + pinctrl-1 = <&dcan0_sleep>; status = "okay"; }; &dcan1 { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&dcan1_default>; + pinctrl-1 = <&dcan1_sleep>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 026d4d6db2ae1586dc34305e5689ec46e05842bc Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:19:58 +0300 Subject: ARM: dts: dra7: Add McASP3 node Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index e289c706d27d..f5f4e9f25620 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -1404,6 +1404,21 @@ status = "disabled"; }; + mcasp3: mcasp@48468000 { + compatible = "ti,dra7-mcasp-audio"; + ti,hwmods = "mcasp3"; + reg = <0x48468000 0x2000>; + reg-names = "mpu"; + interrupts = , + ; + interrupt-names = "tx", "rx"; + dmas = <&sdma_xbar 133>, <&sdma_xbar 132>; + dma-names = "tx", "rx"; + clocks = <&mcasp3_ahclkx_mux>; + clock-names = "fck"; + status = "disabled"; + }; + crossbar_mpu: crossbar@4a002a48 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; -- cgit v1.2.3-70-g09d2 From 27f39e5f5fd1d9eb5ce67507ad57ef5df007f208 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:19:59 +0300 Subject: ARM: dts: dra7-evm: Rename mmc2_3v3 supply to evm_3v3_sw Use the name for the supply as it is in the schematics since the same supply is used for other peripherals than MMC2, like audio. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index a6c82e5b64fe..de02cf5853a9 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -28,9 +28,9 @@ gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>; }; - mmc2_3v3: fixedregulator-mmc2 { + evm_3v3_sw: fixedregulator-evm_3v3_sw { compatible = "regulator-fixed"; - regulator-name = "mmc2_3v3"; + regulator-name = "evm_3v3_sw"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -484,7 +484,7 @@ &mmc2 { status = "okay"; - vmmc-supply = <&mmc2_3v3>; + vmmc-supply = <&evm_3v3_sw>; bus-width = <8>; }; -- cgit v1.2.3-70-g09d2 From d6818223cd46542ed0162ad6208a3425e79fd514 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:00 +0300 Subject: ARM: dts: dra7-evm: Add fixed regulator to be used by aic3106's DVDD TPS77018DBVT is used to create 1.8V from avm_3v3_sw's 3.3V connected to aic3106's DVDD. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index de02cf5853a9..add77ac4f302 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -35,6 +35,15 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3_sw>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>; -- cgit v1.2.3-70-g09d2 From c5d294db75d16b30935fd3be8eef96d82f78355a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:01 +0300 Subject: ARM: dts: dra7-evm: Enable pcf8575 (0x26 address) on i2c2 bus This GPIO expander is used for controlling various muxes on the board. By default select audio functionality over VIN6 by setting the P1 (vin6_sel_s0) pin to low. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index add77ac4f302..3694046c29eb 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -438,6 +438,20 @@ pinctrl-names = "default"; pinctrl-0 = <&i2c2_pins>; clock-frequency = <400000>; + + pcf_hdmi: gpio@26 { + compatible = "nxp,pcf8575"; + reg = <0x26>; + gpio-controller; + #gpio-cells = <2>; + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; + }; }; &i2c3 { -- cgit v1.2.3-70-g09d2 From a9347bfa9b186615968d049ccbf856f95b2eeace Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:02 +0300 Subject: ARM: dts: dra7-evm: Audio support The board uses tlv320aic3106 codec connected to McASP3. The master clock for the codec and McASP3 is coming from ATL2. McASP3 is the master on the I2S bus. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 113 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 113 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 3694046c29eb..1a66d359f3e3 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -9,6 +9,7 @@ #include "dra74x.dtsi" #include +#include / { model = "TI DRA742"; @@ -64,6 +65,40 @@ enable-active-high; gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; }; &dra7_pmx_core { @@ -292,6 +327,31 @@ 0x418 (MUX_MODE15 | PULL_UP) /* wakeup0.off */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (MUX_MODE15) + 0x328 (MUX_MODE15) + 0x32c (MUX_MODE15) + 0x330 (MUX_MODE15) + >; + }; }; &i2c1 { @@ -431,6 +491,20 @@ #interrupt-cells = <2>; }; + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3_sw>; + IOVDD-supply = <&evm_3v3_sw>; + DRVDD-supply = <&evm_3v3_sw>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c2 { @@ -730,3 +804,42 @@ pinctrl-1 = <&dcan1_pins_sleep>; pinctrl-2 = <&dcan1_pins_default>; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; -- cgit v1.2.3-70-g09d2 From 61085ee712901ac608c50521f44837a4ff54afdc Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:03 +0300 Subject: ARM: dts: dra72-evm: Add fixed regulator representing DVDD supply for aic3106 The DVDD is supplied via TPS77018DBVT fixed regulator from evm_3v3 Signed-off-by: Peter Ujfalusi Signed-off-by: Darren Etheridge Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 6f6bd98c98df..ac3a29483791 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -30,6 +30,15 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + /* TPS77018DBVT */ + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd"; + vin-supply = <&evm_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + evm_3v3_sd: fixedregulator-sd { compatible = "regulator-fixed"; regulator-name = "evm_3v3_sd"; -- cgit v1.2.3-70-g09d2 From 6ddd5fce849a5d06bee7e5cf10ad7db21b68aa7b Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:04 +0300 Subject: ARM: dts: dra72-evm: Add gpio hog for vin6_sel_s0 to select audio The GPIO expander's p1 on i2c5 bus 0x26 address is used for selecting between audio and VIN6 functionality. For VIN6 use an add on card is needed while audio is present on the board itself. Select the audio functionality over the VIN6 in the dts file. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index ac3a29483791..33be5c64bda3 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -119,6 +119,13 @@ >; }; + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x2b4 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr0.i2c5_sda */ + 0x2b8 (PIN_INPUT | MUX_MODE10) /* mcasp1_axr1.i2c5_scl */ + >; + }; + nand_default: nand_default { pinctrl-single,pins = < 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */ @@ -389,6 +396,14 @@ * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6 */ lines-initial-states = <0x0f2b>; + + p1 { + /* vin6_sel_s0: high: VIN6, low: audio */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-low; + line-name = "vin6_sel_s0"; + }; }; }; -- cgit v1.2.3-70-g09d2 From a8d3b59cddbdd31211a81379aaa54ed0de91358a Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:05 +0300 Subject: ARM: dts: dra72-evm: Audio support The board uses tlv320aic3106 codec connected to McASP3. The master clock for the codec and McASP3 is coming from ATL2. McASP3 is the master on the I2S bus. Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 114 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 114 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 33be5c64bda3..249000d50090 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -9,6 +9,7 @@ #include "dra72x.dtsi" #include +#include / { model = "TI DRA722"; @@ -102,6 +103,40 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "DRA7xx-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out", + "Microphone", "Mic Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + sound0_master: simple-audio-card,cpu { + sound-dai = <&mcasp3>; + system-clock-frequency = <5644800>; + }; + + simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + clocks = <&atl_clkin2_ck>; + }; + }; }; &dra7_pmx_core { @@ -236,6 +271,31 @@ 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */ >; }; + + atl_pins: pinmux_atl_pins { + pinctrl-single,pins = < + 0x298 (PIN_OUTPUT | MUX_MODE5) /* xref_clk1.atl_clk1 */ + 0x29c (PIN_OUTPUT | MUX_MODE5) /* xref_clk2.atl_clk2 */ + >; + }; + + mcasp3_pins: pinmux_mcasp3_pins { + pinctrl-single,pins = < + 0x324 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx */ + 0x328 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1 */ + >; + }; + + mcasp3_sleep_pins: pinmux_mcasp3_sleep_pins { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x32c (PIN_INPUT_PULLDOWN | MUX_MODE15) + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE15) + >; + }; }; &i2c1 { @@ -376,6 +436,21 @@ output-low; }; }; + + tlv320aic3106: tlv320aic3106@19 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x19>; + adc-settle-ms = <40>; + ai3x-micbias-vg = <1>; /* 2.0V */ + status = "okay"; + + /* Regulators */ + AVDD-supply = <&evm_3v3>; + IOVDD-supply = <&evm_3v3>; + DRVDD-supply = <&evm_3v3>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c5 { @@ -719,3 +794,42 @@ }; }; }; + +&atl { + pinctrl-names = "default"; + pinctrl-0 = <&atl_pins>; + + assigned-clocks = <&abe_dpll_sys_clk_mux>, + <&atl_gfclk_mux>, + <&dpll_abe_ck>, + <&dpll_abe_m2x2_ck>, + <&atl_clkin2_ck>; + assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>; + assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>; + + status = "okay"; + + atl2 { + bws = ; + aws = ; + }; +}; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins>; + pinctrl-1 = <&mcasp3_sleep_pins>; + + assigned-clocks = <&mcasp3_ahclkx_mux>; + assigned-clock-parents = <&atl_clkin2_ck>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; -- cgit v1.2.3-70-g09d2 From d929e8bb13972e86ed9cc23578a559e773d57a19 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:06 +0300 Subject: ARM: dts: am57xx-beagle-x15: Add fixed regulator for aic3104's DVDD The DVDD is supplied via TPS77018DBVT fixed regulator from vdd_3v3 Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 568adf5efde0..f9f31b15e0f6 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -35,6 +35,14 @@ regulator-max-microvolt = <3300000>; }; + aic_dvdd: fixedregulator-aic_dvdd { + compatible = "regulator-fixed"; + regulator-name = "aic_dvdd_fixed"; + vin-supply = <&vdd_3v3>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vtt_fixed: fixedregulator-vtt { /* TPS51200 */ compatible = "regulator-fixed"; -- cgit v1.2.3-70-g09d2 From a00e368c197b236ec76e6684a6459cee98335e14 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 24 Aug 2015 10:20:07 +0300 Subject: ARM: dts: am57xx-beagle-x15: Enable analog audio support The analog audio setup consists of: McASP3 <-> tlv320aic3104 codec Signed-off-by: Peter Ujfalusi Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 87 +++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index f9f31b15e0f6..3e36d49e452f 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -150,6 +150,32 @@ }; }; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "BeagleBoard-X15"; + simple-audio-card,widgets = + "Line", "Line Out", + "Line", "Line In"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "MIC2L", "Line In", + "MIC2R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp3>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3104>; + clocks = <&clkout2_clk>; + }; + }; }; &dra7_pmx_core { @@ -334,6 +360,36 @@ 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */ >; }; + + clkout2_pins_default: clkout2_pins_default { + pinctrl-single,pins = < + 0x294 (PIN_OUTPUT_PULLDOWN | MUX_MODE9) /* xref_clk0.clkout2 */ + >; + }; + + clkout2_pins_sleep: clkout2_pins_sleep { + pinctrl-single,pins = < + 0x294 (PIN_INPUT | MUX_MODE15) /* xref_clk0.clkout2 */ + >; + }; + + mcasp3_pins_default: mcasp3_pins_default { + pinctrl-single,pins = < + 0x324 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_aclkx.mcasp3_aclkx */ + 0x328 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_fsx.mcasp3_fsx */ + 0x32c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr0.mcasp3_axr0 */ + 0x330 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp3_axr1.mcasp3_axr1 */ + >; + }; + + mcasp3_pins_sleep: mcasp3_pins_sleep { + pinctrl-single,pins = < + 0x324 (PIN_INPUT | MUX_MODE15) + 0x328 (PIN_INPUT | MUX_MODE15) + 0x32c (PIN_INPUT | MUX_MODE15) + 0x330 (PIN_INPUT | MUX_MODE15) + >; + }; }; &i2c1 { @@ -518,6 +574,22 @@ interrupts = <16 IRQ_TYPE_LEVEL_LOW>; #thermal-sensor-cells = <1>; }; + + tlv320aic3104: tlv320aic3104@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3104"; + reg = <0x18>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&clkout2_pins_default>; + pinctrl-1 = <&clkout2_pins_sleep>; + status = "okay"; + adc-settle-ms = <40>; + + AVDD-supply = <&vdd_3v3>; + IOVDD-supply = <&vdd_3v3>; + DRVDD-supply = <&vdd_3v3>; + DVDD-supply = <&aic_dvdd>; + }; }; &i2c3 { @@ -716,3 +788,18 @@ &pcie1 { gpios = <&gpio2 8 GPIO_ACTIVE_LOW>; }; + +&mcasp3 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp3_pins_default>; + pinctrl-1 = <&mcasp3_pins_sleep>; + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; +}; -- cgit v1.2.3-70-g09d2 From 4fbdc6ab836f54e7559a637d9db44be7535c0889 Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 27 Aug 2015 18:20:45 +0300 Subject: ARM: dts: dra7-evm: add pcf8575 gpio expander (i2c1 addr 20) This patch adds DT definition for CF8575 GPIO pcf_lcd: gpio@20 expander which is connected to i2c bus 1 and has slave address 0x20. It allows to control: - tc_lcd gpios, pins p0-p3 - user leds, pins p4-p7 - control LCD panel power, p15 PCF8575 GPIO pcf_lcd: gpio@20 expander supports interrupt controller functionality and its INT line is connected to dra7 GPIO6.11 pin. Cc: Tomi Valkeinen Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 1a66d359f3e3..d40418c8d5a3 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -479,6 +479,17 @@ }; }; + pcf_lcd: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + pcf_gpio_21: gpio@21 { compatible = "ti,pcf8575"; reg = <0x21>; -- cgit v1.2.3-70-g09d2 From a96e8808854cceefab45a7b71152ccebf3ba6cdf Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 27 Aug 2015 18:20:46 +0300 Subject: ARM: dts: dra7-evm: add gpio leds support dra7-evm has 4 user gpio leds connected to PCF8575 GPIO pcf_lcd: gpio@20 expander pins [4,5,6,7], so add corresponding DT nodes. Do not enable any triggers by default as not all of them are proved to work on -RT. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index d40418c8d5a3..9b4ce227f3fd 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -99,6 +99,33 @@ clocks = <&atl_clkin2_ck>; }; }; + + leds { + compatible = "gpio-leds"; + led@0 { + label = "dra7:usr1"; + gpios = <&pcf_lcd 4 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@1 { + label = "dra7:usr2"; + gpios = <&pcf_lcd 5 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@2 { + label = "dra7:usr3"; + gpios = <&pcf_lcd 6 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + led@3 { + label = "dra7:usr4"; + gpios = <&pcf_lcd 7 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; }; &dra7_pmx_core { -- cgit v1.2.3-70-g09d2 From 863987affb36c029bcd868eb86145c7fa405f5bd Mon Sep 17 00:00:00 2001 From: Grygorii Strashko Date: Thu, 27 Aug 2015 18:20:47 +0300 Subject: ARM: dts: dra7-evm: add gpio key support dra7-evm has 2 gpio keys wired through TS_LCD_GPIO3, TS_LCD_GPIO4 which in turn connected to PCF8575 GPIO pcf_lcd: gpio@20 expander pins 2 and 3. Signed-off-by: Grygorii Strashko Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 9b4ce227f3fd..9e2dc8d88070 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -10,6 +10,7 @@ #include "dra74x.dtsi" #include #include +#include / { model = "TI DRA742"; @@ -126,6 +127,25 @@ default-state = "off"; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + USER1 { + label = "btnUser1"; + linux,code = ; + gpios = <&pcf_lcd 2 GPIO_ACTIVE_LOW>; + }; + + USER2 { + label = "btnUser2"; + linux,code = ; + gpios = <&pcf_lcd 3 GPIO_ACTIVE_LOW>; + }; + }; }; &dra7_pmx_core { -- cgit v1.2.3-70-g09d2 From c72bfb883d1d03a7777960d78437c8329684390d Mon Sep 17 00:00:00 2001 From: Teresa Remmet Date: Thu, 3 Sep 2015 14:00:07 +0200 Subject: ARM: dts: am335x-wega: Clean up regulators Cleaned up the regulators on the wega board. Created a simple bus, renamed the regulators according to the schematics and added missing regulator on wega. Signed-off-by: Teresa Remmet Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-phycore-som.dtsi | 36 ++++++++++++++++--------------- arch/arm/boot/dts/am335x-wega.dtsi | 13 ++++++++++- 2 files changed, 31 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-phycore-som.dtsi b/arch/arm/boot/dts/am335x-phycore-som.dtsi index 5dd084f3c81c..2f43e458ea4a 100644 --- a/arch/arm/boot/dts/am335x-phycore-som.dtsi +++ b/arch/arm/boot/dts/am335x-phycore-som.dtsi @@ -29,8 +29,17 @@ reg = <0x80000000 0x10000000>; /* 256 MB */ }; - vbat: fixedregulator@0 { - compatible = "regulator-fixed"; + regulators { + compatible = "simple-bus"; + + vcc5v: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vcc5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + }; }; }; @@ -233,14 +242,14 @@ #include "tps65910.dtsi" &tps { - vcc1-supply = <&vbat>; - vcc2-supply = <&vbat>; - vcc3-supply = <&vbat>; - vcc4-supply = <&vbat>; - vcc5-supply = <&vbat>; - vcc6-supply = <&vbat>; - vcc7-supply = <&vbat>; - vccio-supply = <&vbat>; + vcc1-supply = <&vcc5v>; + vcc2-supply = <&vcc5v>; + vcc3-supply = <&vcc5v>; + vcc4-supply = <&vcc5v>; + vcc5-supply = <&vcc5v>; + vcc6-supply = <&vcc5v>; + vcc7-supply = <&vcc5v>; + vccio-supply = <&vcc5v>; regulators { vrtc_reg: regulator@0 { @@ -311,13 +320,6 @@ }; }; -&vbat { - regulator-name = "vbat"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-boot-on; -}; - /* SPI Busses */ &am33xx_pinmux { spi0_pins: pinmux_spi0 { diff --git a/arch/arm/boot/dts/am335x-wega.dtsi b/arch/arm/boot/dts/am335x-wega.dtsi index 5e541bd1b45a..2cecb3951e1b 100644 --- a/arch/arm/boot/dts/am335x-wega.dtsi +++ b/arch/arm/boot/dts/am335x-wega.dtsi @@ -11,6 +11,17 @@ model = "Phytec AM335x phyBOARD-WEGA"; compatible = "phytec,am335x-wega", "phytec,am335x-phycore-som", "ti,am33xx"; + regulators { + compatible = "simple-bus"; + + vcc3v3: fixedregulator@1 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + }; }; /* CAN Busses */ @@ -80,7 +91,7 @@ }; &mmc1 { - vmmc-supply = <&vmmc_reg>; + vmmc-supply = <&vcc3v3>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; -- cgit v1.2.3-70-g09d2 From a9c8f117f43515572a914e9ec7332906c4e7cdde Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 18 Sep 2015 13:16:30 -0500 Subject: ARM: dts: DRA74x: Add IPC sub-mailbox nodes for all IPUs & DSPs Add the sub-mailbox nodes that are used to communicate between MPU and the remote processors IPU1, IPU2, DSP1 and DSP2. The sub-mailbox nodes utilize the System Mailbox instances 5 and 6. These sub-mailbox nodes are added to match the hard-coded mailbox configuration used within the TI IPC 3.x software package. The Dual-Cortex M4 IPU1 and IPU2 processor sub-systems are assumed to be running in SMP-mode, and hence only a single sub-mailbox node is added for each. All these sub-mailbox nodes are left in disabled state, and should be enabled (and modified if needed) as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra74x.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index feea98e0a4b5..33d11c2c8af3 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -93,3 +93,29 @@ <&dss_video2_clk>; clock-names = "fck", "video1_clk", "video2_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; -- cgit v1.2.3-70-g09d2 From 48aff9f6faa59677645e02dd9e1c043a75caf1c1 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 18 Sep 2015 13:16:31 -0500 Subject: ARM: dts: DRA72x: Add IPC sub-mailbox nodes for IPU1, IPU2 & DSP1 Add the sub-mailbox nodes that are used to communicate between MPU and the remote processors IPU1, IPU2 and DSP1. These match the respective node definitions on DRA74x to maintain compatibility for the equivalent remote processors. There is no DSP2 on DRA72x, and so the corresponding sub-mailbox node is not added. These sub-mailbox nodes are added to match the hard-coded mailbox configuration used within the TI IPC 3.x software package. The Dual-Cortex M4 IPU1 and IPU2 processor sub-systems are assumed to be running in SMP-mode, and hence only a single sub-mailbox node is added for each. All these sub-mailbox nodes are left in disabled state, and should be enabled (and modified if needed) as per the individual product configuration in the corresponding board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72x.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi index eaca143faa77..70a217050a4c 100644 --- a/arch/arm/boot/dts/dra72x.dtsi +++ b/arch/arm/boot/dts/dra72x.dtsi @@ -45,3 +45,24 @@ <&dss_video1_clk>; clock-names = "fck", "video1_clk"; }; + +&mailbox5 { + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + ti,mbox-tx = <5 2 2>; + ti,mbox-rx = <1 2 2>; + status = "disabled"; + }; +}; + +&mailbox6 { + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + ti,mbox-tx = <6 2 2>; + ti,mbox-rx = <4 2 2>; + status = "disabled"; + }; +}; -- cgit v1.2.3-70-g09d2 From 2bee86799f4aff1c62d7fcba87a1a028c32c7955 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 18 Sep 2015 13:16:32 -0500 Subject: ARM: dts: dra7-evm: Enable the system mailboxes 5 and 6 Enable the System Mailboxes 5 and 6 and the corresponding child sub-mailbox (IPC 3.x) nodes for the DRA7 EVM board. This is needed to enable communication with the respective remote processors IPU1, IPU2, DSP1 and DSP2 from the MPU. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7-evm.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 9e2dc8d88070..4e796493a463 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -901,3 +901,23 @@ 1 2 0 0 >; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; -- cgit v1.2.3-70-g09d2 From 43914a35d2bd4f3ee74fafc4aadcdd4f37df18d3 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 18 Sep 2015 13:16:33 -0500 Subject: ARM: dts: dra72-evm: Enable the system mailboxes 5 and 6 Enable the System Mailboxes 5 and 6 and the corresponding child sub-mailbox (IPC 3.x) nodes for the DRA72 EVM board. This is needed to enable communication with the respective remote processors IPU1, IPU2, and DSP1 from the MPU. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 249000d50090..cc671187814a 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -833,3 +833,20 @@ 1 2 0 0 >; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; +}; -- cgit v1.2.3-70-g09d2 From ebbf93f0e76fb0d0afd2ff1a7b6df5badc2fd496 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 18 Sep 2015 13:16:34 -0500 Subject: ARM: dts: beagle-x15: Enable the system mailboxes 5 and 6 Enable the System Mailboxes 5 and 6 and the corresponding child sub-mailbox (IPC 3.x) nodes for the Beagle X15 EVM boards. This is needed to enable communication with the respective remote processors IPU1, IPU2, DSP1 and DSP2 from the MPU. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index 3e36d49e452f..beee919f54a4 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -803,3 +803,23 @@ 1 2 0 0 >; }; + +&mailbox5 { + status = "okay"; + mbox_ipu1_ipc3x: mbox_ipu1_ipc3x { + status = "okay"; + }; + mbox_dsp1_ipc3x: mbox_dsp1_ipc3x { + status = "okay"; + }; +}; + +&mailbox6 { + status = "okay"; + mbox_ipu2_ipc3x: mbox_ipu2_ipc3x { + status = "okay"; + }; + mbox_dsp2_ipc3x: mbox_dsp2_ipc3x { + status = "okay"; + }; +}; -- cgit v1.2.3-70-g09d2 From 79a4e64c679d8a0b1037da174e4aea578c80c4e6 Mon Sep 17 00:00:00 2001 From: Robert Nelson Date: Fri, 25 Sep 2015 10:10:31 -0500 Subject: ARM: dts: Add am335x-bonegreen SeeedStudio BeagleBone Green (BBG) is clone of the BeagleBone Black (BBB) minus the HDMI port and addition of two Grove connectors (i2c2 and usart2). This board can be identified by the 1A value after A335BNLT (BBB) in the at24 eeprom: 1A: [aa 55 33 ee 41 33 33 35 42 4e 4c 54 1a 00 00 00 |.U3.A335BNLT....|] http://beagleboard.org/green http://www.seeedstudio.com/wiki/Beaglebone_green Signed-off-by: Robert Nelson CC: Tony Lindgren CC: Jason Kridner Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/am335x-bonegreen.dts | 53 ++++++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) create mode 100644 arch/arm/boot/dts/am335x-bonegreen.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..e45d771456f3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -446,6 +446,7 @@ dtb-$(CONFIG_SOC_AM33XX) += \ am335x-base0033.dtb \ am335x-bone.dtb \ am335x-boneblack.dtb \ + am335x-bonegreen.dtb \ am335x-sl50.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ diff --git a/arch/arm/boot/dts/am335x-bonegreen.dts b/arch/arm/boot/dts/am335x-bonegreen.dts new file mode 100644 index 000000000000..0f65bdaaa583 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bonegreen.dts @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "am33xx.dtsi" +#include "am335x-bone-common.dtsi" + +/ { + model = "TI AM335x BeagleBone Green"; + compatible = "ti,am335x-bone-green", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx"; +}; + +&ldo3_reg { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + bus-width = <8>; + status = "okay"; +}; + +&am33xx_pinmux { + uart2_pins: uart2_pins { + pinctrl-single,pins = < + 0x150 (PIN_INPUT | MUX_MODE1) /* spi0_sclk.uart2_rxd */ + 0x154 (PIN_OUTPUT | MUX_MODE1) /* spi0_d0.uart2_txd */ + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "okay"; +}; + +&rtc { + system-power-controller; +}; -- cgit v1.2.3-70-g09d2 From 3a637e008e542b8ebdc2ceed616b229af0462b14 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 6 Oct 2015 11:03:39 +0200 Subject: ARM: dts: Use defined GPIO constants in flags cell for OMAP2+ boards Many OMAP2+ DTS are not using the defined constants to express the GPIO polarity. Replace these so the DTS are easier to read. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap2420-n8x0-common.dtsi | 6 +++--- arch/arm/boot/dts/omap3-beagle-xm.dts | 2 +- arch/arm/boot/dts/omap3-beagle.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +- arch/arm/boot/dts/omap3-evm-common.dtsi | 4 ++-- arch/arm/boot/dts/omap3-gta04.dtsi | 10 +++++----- arch/arm/boot/dts/omap3-gta04a5.dts | 2 +- arch/arm/boot/dts/omap3-ldp.dts | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-lilly-dbb056.dts | 4 ++-- arch/arm/boot/dts/omap3-n950-n9.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-base.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 4 ++-- arch/arm/boot/dts/omap3-tao3530.dtsi | 4 ++-- arch/arm/boot/dts/omap3-zoom3.dts | 2 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 4 ++-- arch/arm/boot/dts/omap4-sdp.dts | 6 +++--- arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi | 2 +- arch/arm/boot/dts/omap4-var-som-om44.dtsi | 2 +- arch/arm/boot/dts/omap4460.dtsi | 2 +- arch/arm/boot/dts/omap5-cm-t54.dts | 2 +- arch/arm/boot/dts/omap5-uevm.dts | 2 +- 25 files changed, 38 insertions(+), 38 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi index c9f1e93a95ae..8491f46c61b7 100644 --- a/arch/arm/boot/dts/omap2420-n8x0-common.dtsi +++ b/arch/arm/boot/dts/omap2420-n8x0-common.dtsi @@ -9,9 +9,9 @@ ocp { i2c@0 { compatible = "i2c-cbus-gpio"; - gpios = <&gpio3 2 0 /* gpio66 clk */ - &gpio3 1 0 /* gpio65 dat */ - &gpio3 0 0 /* gpio64 sel */ + gpios = <&gpio3 2 GPIO_ACTIVE_HIGH /* gpio66 clk */ + &gpio3 1 GPIO_ACTIVE_HIGH /* gpio65 dat */ + &gpio3 0 GPIO_ACTIVE_HIGH /* gpio64 sel */ >; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 7c4dca122a91..73f1e3a8f62c 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -80,7 +80,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 67659a0ed13e..274c2c482aaa 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -55,7 +55,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index 4d091ca43e25..8c813e77b17f 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -224,7 +224,7 @@ interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 0>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index e84184de2a4a..4813e96157b3 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 0>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-evm-common.dtsi b/arch/arm/boot/dts/omap3-evm-common.dtsi index b2589f96d5f7..090475083c2f 100644 --- a/arch/arm/boot/dts/omap3-evm-common.dtsi +++ b/arch/arm/boot/dts/omap3-evm-common.dtsi @@ -26,7 +26,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio5 22 0>; /* gpio150 */ + gpio = <&gpio5 22 GPIO_ACTIVE_HIGH>; /* gpio150 */ startup-delay-us = <70000>; enable-active-high; vin-supply = <&vmmc2>; @@ -91,7 +91,7 @@ tsc2046@0 { interrupt-parent = <&gpio6>; interrupts = <15 0>; /* gpio175 */ - pendown-gpio = <&gpio6 15 0>; + pendown-gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi index 7166d8876ea8..e14d15e5abc8 100644 --- a/arch/arm/boot/dts/omap3-gta04.dtsi +++ b/arch/arm/boot/dts/omap3-gta04.dtsi @@ -77,10 +77,10 @@ pinctrl-names = "default"; pinctrl-0 = <&spi_gpio_pins>; - gpio-sck = <&gpio1 12 0>; - gpio-miso = <&gpio1 18 0>; - gpio-mosi = <&gpio1 20 0>; - cs-gpios = <&gpio1 19 0>; + gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>; + cs-gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>; num-chipselects = <1>; /* lcd panel */ @@ -118,7 +118,7 @@ tv_amp: opa362 { compatible = "ti,opa362"; - enable-gpios = <&gpio1 23 0>; + enable-gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap3-gta04a5.dts b/arch/arm/boot/dts/omap3-gta04a5.dts index 52b386f6865b..600b6ca5a1bd 100644 --- a/arch/arm/boot/dts/omap3-gta04a5.dts +++ b/arch/arm/boot/dts/omap3-gta04a5.dts @@ -12,6 +12,6 @@ model = "Goldelico GTA04A5"; sound { - ti,jack-det-gpio = <&twl_gpio 2 0>; /* GTA04A5 only */ + ti,jack-det-gpio = <&twl_gpio 2 GPIO_ACTIVE_HIGH>; /* GTA04A5 only */ }; }; diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts index bd6e6769c7ce..d2fab8c0d4f8 100644 --- a/arch/arm/boot/dts/omap3-ldp.dts +++ b/arch/arm/boot/dts/omap3-ldp.dts @@ -200,7 +200,7 @@ tsc2046@0 { interrupt-parent = <&gpio2>; interrupts = <22 0>; /* gpio54 */ - pendown-gpio = <&gpio2 22 0>; + pendown-gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index d0dd0365bfda..46f88f86a50b 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -314,7 +314,7 @@ interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 0>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-lilly-dbb056.dts b/arch/arm/boot/dts/omap3-lilly-dbb056.dts index 834f7c65f62d..0e3c9812f4e3 100644 --- a/arch/arm/boot/dts/omap3-lilly-dbb056.dts +++ b/arch/arm/boot/dts/omap3-lilly-dbb056.dts @@ -114,8 +114,8 @@ status = "okay"; bus-width = <4>; vmmc-supply = <&vmmc1>; - cd-gpios = <&gpio6 4 0>; /* gpio_164 */ - wp-gpios = <&gpio6 3 0>; /* gpio_163 */ + cd-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio_164 */ + wp-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* gpio_163 */ pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins>; ti,dual-volt; diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi index 800b379d368d..e9ee1df0e467 100644 --- a/arch/arm/boot/dts/omap3-n950-n9.dtsi +++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi @@ -27,7 +27,7 @@ regulator-name = "VEMMC"; regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; - gpio = <&gpio5 29 0>; /* gpio line 157 */ + gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */ startup-delay-us = <150>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 28430f1596f2..a29ad16cc9bb 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -35,7 +35,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; - gpio = <&gpio6 8 0>; /* gpio_168: vbus enable */ + gpio = <&gpio6 8 GPIO_ACTIVE_HIGH>; /* gpio_168: vbus enable */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 80d236ac64a5..b09cedf66117 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -152,7 +152,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 048fd216970a..5f979590571b 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -163,7 +163,7 @@ interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 0>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index f2084e6d01e7..cfe140c657e7 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -218,7 +218,7 @@ regulator-always-on; regulator-boot-on; enable-active-high; - gpio = <&gpio6 4 0>; /* GPIO_164 */ + gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* GPIO_164 */ }; /* wg7210 (wifi+bt module) 32k clock buffer */ @@ -607,7 +607,7 @@ pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 0>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 0>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap3-tao3530.dtsi b/arch/arm/boot/dts/omap3-tao3530.dtsi index 7bd8d9a4f67f..ae5dbbd9d569 100644 --- a/arch/arm/boot/dts/omap3-tao3530.dtsi +++ b/arch/arm/boot/dts/omap3-tao3530.dtsi @@ -37,7 +37,7 @@ regulator-name = "hsusb2_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&twl_gpio 18 0>; /* GPIO LEDA */ + gpio = <&twl_gpio 18 GPIO_ACTIVE_HIGH>; /* GPIO LEDA */ startup-delay-us = <70000>; }; @@ -225,7 +225,7 @@ pinctrl-0 = <&mmc1_pins>; vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; - cd-gpios = <&twl_gpio 0 0>; + cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/omap3-zoom3.dts b/arch/arm/boot/dts/omap3-zoom3.dts index 131448d86e67..7bc5fdd6981e 100644 --- a/arch/arm/boot/dts/omap3-zoom3.dts +++ b/arch/arm/boot/dts/omap3-zoom3.dts @@ -44,7 +44,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio4 5 0>; /* gpio101 */ + gpio = <&gpio4 5 GPIO_ACTIVE_HIGH>; /* gpio101 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi index f1507bc8737e..18d096696fc0 100644 --- a/arch/arm/boot/dts/omap4-panda-common.dtsi +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -68,7 +68,7 @@ regulator-name = "hsusb1_vbus"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio1 1 0>; /* gpio_1 */ + gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>; /* gpio_1 */ startup-delay-us = <70000>; enable-active-high; /* @@ -98,7 +98,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index dac86ed7481f..f0bdc41f8eff 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -30,7 +30,7 @@ regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio2 16 0>; /* gpio line 48 */ + gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>; /* gpio line 48 */ enable-active-high; regulator-boot-on; }; @@ -155,7 +155,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 22 0>; + gpio = <&gpio2 22 GPIO_ACTIVE_HIGH>; startup-delay-us = <70000>; enable-active-high; }; @@ -374,7 +374,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + ti,audpwron-gpio = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio line 127 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi index 9bceeb7e1f03..1c5f6f35e1cf 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi @@ -15,7 +15,7 @@ regulator-name = "vwl1271"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - gpio = <&gpio2 11 0>; /* gpio 43 */ + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; /* gpio 43 */ startup-delay-us = <70000>; enable-active-high; }; diff --git a/arch/arm/boot/dts/omap4-var-som-om44.dtsi b/arch/arm/boot/dts/omap4-var-som-om44.dtsi index a4f1ba2e1903..49d032b846be 100644 --- a/arch/arm/boot/dts/omap4-var-som-om44.dtsi +++ b/arch/arm/boot/dts/omap4-var-som-om44.dtsi @@ -196,7 +196,7 @@ /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio6 22 0>; /* gpio 182 */ + ti,audpwron-gpio = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio 182 */ vio-supply = <&v1v8>; v2v1-supply = <&v2v1>; diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index 194f9ef0a009..5fa68f191af7 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -46,7 +46,7 @@ 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ - gpios = <&gpio3 22 0>; /* tshut */ + gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* tshut */ #thermal-sensor-cells = <0>; }; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 61ad2ea34720..3774b37be6c8 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -344,7 +344,7 @@ interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 0>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 3cb030f9d2c4..4da9e52f147b 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -527,7 +527,7 @@ pinctrl-0 = <&twl6040_pins>; interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ vio-supply = <&smps7_reg>; v2v1-supply = <&smps9_reg>; -- cgit v1.2.3-70-g09d2 From 99639ace4c83f26698d5a524df01c9a9c2c8c7b6 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 2 Oct 2015 18:23:22 -0500 Subject: ARM: dts: DRA7: Add dsp1_system syscon node The DSP_SYSTEM sub-module is a dedicated system control logic module present within a DRA7 DSP processor sub-system. This module is responsible for power management, clock generation and connection to the device PRCM module. Add a syscon node for this module for the DSP1 processor sub-system. This is added as a syscon node as it is a common configuration module that can be used by the different IOMMU instances and the corresponding remoteproc device. The node is added to the common dra7.dtsi file, as the DSP1 processor sub-system is mostly common across all the variants of the DRA7 SoC family. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index f5f4e9f25620..ae6ee76c73ce 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -292,6 +292,11 @@ #thermal-sensor-cells = <1>; }; + dsp1_system: dsp_system@40d00000 { + compatible = "syscon"; + reg = <0x40d00000 0x100>; + }; + sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; -- cgit v1.2.3-70-g09d2 From bddbe6db4a8b3931670357e438ade2784a690312 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 2 Oct 2015 18:23:23 -0500 Subject: ARM: dts: DRA74x: Add dsp2_system syscon node The DSP_SYSTEM sub-module is a dedicated system control logic module present within a DRA7 DSP processor sub-system. This module is responsible for power management, clock generation and connection to the device PRCM module. Add a syscon node for this module for the DSP2 processor sub-system. This is added as a syscon node as it is a common configuration module that can be used by the different IOMMU instances and the corresponding remoteproc device. The node is added to the dra74x.dtsi file, as the DSP2 processor subsystem is usually present only on the DRA74x variants of the DRA7 SoC family. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra74x.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index 33d11c2c8af3..c7f13ca5d774 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -52,6 +52,11 @@ }; ocp { + dsp2_system: dsp_system@41500000 { + compatible = "syscon"; + reg = <0x41500000 0x100>; + }; + omap_dwc3_4: omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; -- cgit v1.2.3-70-g09d2 From 2c7e07c533ac33bab68471968a888f1f789d1523 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 2 Oct 2015 18:23:24 -0500 Subject: ARM: dts: DRA7: Add common IOMMU nodes The DRA7xx family of SOCs have two IPUs and one DSP processor subsystems in common. The IOMMU DT nodes have been added for these processor subsystems, and have been disabled by default. These MMUs are very similar to those on OMAP4 and OMAP5, with the only difference being the presence of a second MMU within the DSP subsystem for the EDMA port. The DSP IOMMUs also need an additional 'ti,syscon-mmuconfig' property compared to the IPU IOMMUs. NOTE: The enabling of these nodes is left to the respective board dts files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra7.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index ae6ee76c73ce..a635f363d831 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -916,6 +916,46 @@ status = "disabled"; }; + mmu0_dsp1: mmu@40d01000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d01000 0x100>; + interrupts = ; + ti,hwmods = "mmu0_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp1: mmu@40d02000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x40d02000 0x100>; + interrupts = ; + ti,hwmods = "mmu1_dsp1"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp1_system 0x1>; + status = "disabled"; + }; + + mmu_ipu1: mmu@58882000 { + compatible = "ti,dra7-iommu"; + reg = <0x58882000 0x100>; + interrupts = ; + ti,hwmods = "mmu_ipu1"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + + mmu_ipu2: mmu@55082000 { + compatible = "ti,dra7-iommu"; + reg = <0x55082000 0x100>; + interrupts = ; + ti,hwmods = "mmu_ipu2"; + #iommu-cells = <0>; + ti,iommu-bus-err-back; + status = "disabled"; + }; + abb_mpu: regulator-abb-mpu { compatible = "ti,abb-v3"; regulator-name = "abb_mpu"; -- cgit v1.2.3-70-g09d2 From 63c7ecd7b10778157f7c84367e1535f4c023d828 Mon Sep 17 00:00:00 2001 From: Suman Anna Date: Fri, 2 Oct 2015 18:23:25 -0500 Subject: ARM: dts: DRA74x: Add IOMMU nodes for DSP2 The DRA74x family of SoCs have a second DSP, that also has two MMUs just like the DSP1 subsystem. Add the IOMMU nodes for this DSP2 subsystem in disabled state to the DRA74x specific DTS file, the nodes would need to be enabled appropriately in the respective board DTS files. Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra74x.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi index c7f13ca5d774..8bcc47db1cd1 100644 --- a/arch/arm/boot/dts/dra74x.dtsi +++ b/arch/arm/boot/dts/dra74x.dtsi @@ -81,6 +81,26 @@ dr_mode = "otg"; }; }; + + mmu0_dsp2: mmu@41501000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41501000 0x100>; + interrupts = ; + ti,hwmods = "mmu0_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x0>; + status = "disabled"; + }; + + mmu1_dsp2: mmu@41502000 { + compatible = "ti,dra7-dsp-iommu"; + reg = <0x41502000 0x100>; + interrupts = ; + ti,hwmods = "mmu1_dsp2"; + #iommu-cells = <0>; + ti,syscon-mmuconfig = <&dsp2_system 0x1>; + status = "disabled"; + }; }; }; -- cgit v1.2.3-70-g09d2 From e5c914fffd9f70d5f112e0a7e30edab7de78f88b Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Tue, 6 Oct 2015 11:22:59 +0200 Subject: ARM: dts: omap3-lilly-a83x: Don't use IRQ level flag for a GPIO The card detect GPIO is using IRQ_TYPE_LEVEL_LOW in the GPIO flag cells but this defined constant is meant to be used for a IRQ and not a GPIO. So instead use GPIO_ACTIVE_LOW that seems to be the original intention. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index 46f88f86a50b..57d7c93cc72b 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -284,7 +284,7 @@ }; &mmc1 { - cd-gpios = <&gpio4 30 IRQ_TYPE_LEVEL_LOW>; + cd-gpios = <&gpio4 30 GPIO_ACTIVE_LOW>; cd-inverted; vmmc-supply = <&vmmc1>; bus-width = <4>; -- cgit v1.2.3-70-g09d2 From 272c789b8cb7902feb9cf6087417a881ab9cf6ef Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 12 Oct 2015 23:46:39 +0300 Subject: ARM: dts: omap3-igep: Fix indentation Use tabs instead of spaces for indentation. Signed-off-by: Laurent Pinchart Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 2230e1c03320..a2f97928297d 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -155,7 +155,7 @@ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { - }; + }; }; }; }; @@ -175,11 +175,11 @@ }; &mmc1 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc1_pins>; - vmmc-supply = <&vmmc1>; - vmmc_aux-supply = <&vsim>; - bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc1>; + vmmc_aux-supply = <&vsim>; + bus-width = <4>; }; &mmc3 { @@ -187,13 +187,13 @@ }; &uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; }; &uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; }; &twl_gpio { -- cgit v1.2.3-70-g09d2 From 3993fa63c253a45e741ffb22a97c9e4df6a3f105 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 12 Oct 2015 23:46:40 +0300 Subject: ARM: dts: omap3-igep0020: Remove duplicate uart2 pinmux uart2 pinmux is already defined in omap3-igep0020-common.dtsi, remove the duplicate node. Signed-off-by: Laurent Pinchart Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020.dts | 9 --------- 1 file changed, 9 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index fea7f7edb45d..5683b8bf3475 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -45,15 +45,6 @@ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */ >; }; - - uart2_pins: pinmux_uart2_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */ - OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/ - OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */ - OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */ - >; - }; }; /* On board Wifi module */ -- cgit v1.2.3-70-g09d2 From c7ce74bc921b9417cc3ff7255ab308960e34998f Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 12 Oct 2015 14:37:10 +0530 Subject: ARM: dts: am335x: fix cd-gpios definition as per hardware design and dt binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM335x the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-bone-common.dtsi | 3 +-- arch/arm/boot/dts/am335x-evm.dts | 2 +- arch/arm/boot/dts/am335x-evmsk.dts | 2 +- 3 files changed, 3 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi index fec78349c1f3..5d370d54bd30 100644 --- a/arch/arm/boot/dts/am335x-bone-common.dtsi +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi @@ -383,8 +383,7 @@ bus-width = <0x4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; - cd-inverted; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &aes { diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 1942a5c8132d..d9d00ab863a2 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -737,7 +737,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mmc3 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 315bb02c9920..89442e98a837 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -647,7 +647,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &sham { -- cgit v1.2.3-70-g09d2 From 0731cbdd5f408502036184ab510c924a6551bf18 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 12 Oct 2015 14:37:11 +0530 Subject: ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In AM43xx the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- arch/arm/boot/dts/am437x-idk-evm.dts | 2 +- arch/arm/boot/dts/am437x-sk-evm.dts | 2 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- 4 files changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index f25d7a6134cd..b259d7c29bcd 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -703,7 +703,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; /* eMMC sits on mmc2 */ diff --git a/arch/arm/boot/dts/am437x-idk-evm.dts b/arch/arm/boot/dts/am437x-idk-evm.dts index af25801418b4..337fb91ee74c 100644 --- a/arch/arm/boot/dts/am437x-idk-evm.dts +++ b/arch/arm/boot/dts/am437x-idk-evm.dts @@ -325,7 +325,7 @@ pinctrl-1 = <&mmc1_pins_sleep>; vmmc-supply = <&v3_3d>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &qspi { diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index 7da7c2da4af1..1582fdbeaf76 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -563,7 +563,7 @@ vmmc-supply = <&dcdc4>; bus-width = <4>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &usb2_phy1 { diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 86c2dfbe8875..47954ed990f8 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -376,7 +376,7 @@ bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; - cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; &mac { -- cgit v1.2.3-70-g09d2 From 267068d83e6df3bcc8b6486dcb2b43e09cd50be8 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 12 Oct 2015 14:37:12 +0530 Subject: ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs As per mmc device tree binding documentation card detect gpio has to be active low signal. When a hardware is designed with active high card detect, gpio polarity has to be changed with cd-inverted dt property. In DRA74x, DRA72x and AM57xx EVMs the card detect gpio is designed as active low gpio. So correcting the dt card detect gpio definition. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 2 +- arch/arm/boot/dts/dra7-evm.dts | 2 +- arch/arm/boot/dts/dra72-evm.dts | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index beee919f54a4..341ec8825c51 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -665,7 +665,7 @@ vmmc-supply = <&ldo1_reg>; bus-width = <4>; - cd-gpios = <&gpio6 27 0>; /* gpio 219 */ + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */ }; &mmc2 { diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 4e796493a463..864f60020124 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -634,7 +634,7 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is always hardwired. */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; }; &mmc2 { diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index cc671187814a..27e414295acc 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -613,7 +613,7 @@ * SDCD signal is not being used here - using the fact that GPIO mode * is a viable alternative */ - cd-gpios = <&gpio6 27 0>; + cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; max-frequency = <192000000>; }; -- cgit v1.2.3-70-g09d2 From 99f7445ea41c0187cd2e78bcb58cdd9e6c1756e5 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 13 Oct 2015 01:12:18 +0300 Subject: ARM: shmobile: porter: enable internal PCI and USB PHY Enable internal AHB-PCI bridges for the USB EHCI/OHCI controllers attached to them and also enable USB PHY device for the Porter board. We have to enable everything in one patch since EHCI/OHCI devices are already linked to the USB PHY device. Signed-off-by: Sergei Shtylyov Signed-off-by: Simon Horman --- arch/arm/boot/dts/r8a7791-porter.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/r8a7791-porter.dts b/arch/arm/boot/dts/r8a7791-porter.dts index c46aad3954f4..fe0f12fc02a1 100644 --- a/arch/arm/boot/dts/r8a7791-porter.dts +++ b/arch/arm/boot/dts/r8a7791-porter.dts @@ -120,6 +120,16 @@ renesas,function = "i2c2"; }; + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + vin0_pins: vin0 { renesas,groups = "vin0_data8", "vin0_clk"; renesas,function = "vin0"; @@ -245,6 +255,24 @@ }; }; +&pci0 { + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&pci1 { + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + &pcie_bus_clk { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 39b37ce2e308846550339adf101bf85c04f25eec Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 8 Oct 2015 15:31:14 +0200 Subject: ARM: dts: rockchip: Add SPDIF transceiver for RK3188 Add the SPDIF transceiver controller and pin for RK3188 Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 316304272118..6399942f1840 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -121,6 +121,20 @@ status = "disabled"; }; + spdif: sound@1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + status = "disabled"; + }; + cru: clock-controller@20000000 { compatible = "rockchip,rk3188-cru"; reg = <0x20000000 0x1000>; @@ -484,6 +498,12 @@ ; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = ; + }; + }; }; }; -- cgit v1.2.3-70-g09d2 From d97e862ef6ae3f46465f00f9bf043c0df125b899 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 8 Oct 2015 15:31:15 +0200 Subject: ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock This enables the SPDIF optical audio output on the Radxa Rock Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3188-radxarock.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index 9b31abedcef1..66fa87d1e2c2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -90,6 +90,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + ir_recv: gpio-ir-receiver { compatible = "gpio-ir-receiver"; gpios = <&gpio0 10 1>; @@ -345,6 +360,10 @@ }; }; +&spdif { + status = "okay"; +}; + &uart0 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 874e568e500aeed7d54820c21f3854f3ffa1f59d Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 8 Oct 2015 15:31:17 +0200 Subject: ARM: dts: rockchip: Add SPDIF transceiver for RK3288 Add the SPDIF transceiver controller definition and pin setup for RK3288 SoCs Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index d6c2f9116646..12ae3450be54 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -744,6 +744,21 @@ status = "disabled"; }; + spdif: sound@ff88b0000 { + compatible = "rockchip,rk3288-spdif", "rockchip,rk3066-spdif"; + reg = <0xff8b0000 0x10000>; + #sound-dai-cells = <0>; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF8CH>, <&cru SCLK_SPDIF8CH>; + dmas = <&dmac_bus_s 3>; + dma-names = "tx"; + interrupts = ; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + rockchip,grf = <&grf>; + status = "disabled"; + }; + i2s: i2s@ff890000 { compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; reg = <0xff890000 0x10000>; @@ -1437,5 +1452,11 @@ <4 3 3 &pcfg_pull_none>; }; }; + + spdif { + spdif_tx: spdif-tx { + rockchip,pins = ; + }; + }; }; }; -- cgit v1.2.3-70-g09d2 From fea37552600872368a23019aef4bf8c09e0f0380 Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Thu, 8 Oct 2015 15:31:18 +0200 Subject: ARM: dts: rockchip: Add SPDIF optical out on Radxa Rock2 Square Enable the SPDIF optical output on Radxa Rock2 square boards Signed-off-by: Sjoerd Simons Signed-off-by: Heiko Stuebner --- arch/arm/boot/dts/rk3288-rock2-square.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts index d5f6f2665e6c..8af35c867a80 100644 --- a/arch/arm/boot/dts/rk3288-rock2-square.dts +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts @@ -49,6 +49,20 @@ stdout-path = "serial2:115200n8"; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "SPDIF"; + simple-audio-card,dai-link@1 { /* S/PDIF - S/PDIF */ + cpu { sound-dai = <&spdif>; }; + codec { sound-dai = <&spdif_out>; }; + }; + }; + + spdif_out: spdif-out { + compatible = "linux,spdif-dit"; + #sound-dai-cells = <0>; + }; + vcc_usb_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high; @@ -136,6 +150,10 @@ }; }; +&spdif { + status = "okay"; +}; + &uart2 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 2eab04e9c1e5243565b0c098e7b55eeb71d3d97b Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 13 Oct 2015 14:35:46 +0200 Subject: ARM: dts: sun8i: Add sun8i-a23-q8-tablet.dts file This is a generic dts file for A23 based q8 formfactor tablets, this is intended to replace both sun8i-a23-ippo-q8h-v5.dts and sun8i-a23-ippo-q8h-v1.2.dts (these can be fully dropped after a transition period). Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun8i-a23-q8-tablet.dts | 65 +++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm/boot/dts/sun8i-a23-q8-tablet.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e76fe3a3f335..71f965504391 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -636,6 +636,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-a23-gt90h-v4.dtb \ sun8i-a23-ippo-q8h-v5.dtb \ sun8i-a23-ippo-q8h-v1.2.dtb \ + sun8i-a23-q8-tablet.dtb \ sun8i-a33-et-q8-v1.6.dtb \ sun8i-a33-ga10h-v1.1.dtb \ sun8i-a33-ippo-q8h-v1.2.dtb \ diff --git a/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts new file mode 100644 index 000000000000..6062ea7a9903 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-q8-tablet.dts @@ -0,0 +1,65 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a23.dtsi" +#include "sun8i-q8-common.dtsi" + +/ { + model = "Q8 A23 Tablet"; + compatible = "allwinner,q8-a23", "allwinner,sun8i-a23"; +}; + +/* + * FIXME for now we only support host mode and rely on u-boot to have + * turned on Vbus which is controlled by the axp223 pmic on the board. + * + * Once we have axp223 support we should switch to fully supporting otg. + */ +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From d8279bcebb28dcd30106e1597b62ba5c08d5df28 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 13 Oct 2015 14:35:47 +0200 Subject: ARM: dts: sun8i: Make ippo-q8h-v*.dts a symlink to q8-tablet.dts A23 Q8 tablets with the ippo-q8h-v* pcb will work fine with the generic q8-tablet.dts and given the many variants of PCBs found in Q8 tablets using such a specific dts name was a mistake in hindsight. We cannot just drop the ippo-q8h-v*.dtb as existing u-boot configs may very well point to it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts | 55 +------------------- arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts | 75 +-------------------------- 2 files changed, 2 insertions(+), 128 deletions(-) mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts deleted file mode 100644 index 382d64c3b78e..000000000000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Copyright 2015 Hans de Goede - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/* - * The Ippo Q8H v1.2 is almost identical to the v5, still it needs a separate - * dtb file since some gpio-s surrounding the wlan/bluetooth are different, - * and it uses different camera sensors. - */ - -#include "sun8i-a23-ippo-q8h-v5.dts" - -/ { - model = "Ippo Q8H Dual Core Tablet (v1.2)"; - compatible = "ippo,q8h-v1.2", "allwinner,sun8i-a23"; -}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts new file mode 120000 index 000000000000..c2f22fc33811 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v1.2.dts @@ -0,0 +1 @@ +sun8i-a23-q8-tablet.dts \ No newline at end of file diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts deleted file mode 100644 index 4f47fd654eea..000000000000 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright 2014 Chen-Yu Tsai - * - * Chen-Yu Tsai - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a23.dtsi" -#include "sun8i-q8-common.dtsi" - -/ { - model = "Ippo Q8H Dual Core Tablet (v5)"; - compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; -}; - -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins_a>; - /* pull-ups and devices require PMIC regulator */ - status = "failed"; -}; - -/* - * FIXME for now we only support host mode and rely on u-boot to have - * turned on Vbus which is controlled by the axp223 pmic on the board. - * - * Once we have axp223 support we should switch to fully supporting otg. - */ -&usb_otg { - dr_mode = "host"; - status = "okay"; -}; - -&usbphy { - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts new file mode 120000 index 000000000000..c2f22fc33811 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1 @@ +sun8i-a23-q8-tablet.dts \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 252b9af1dfa7c644f48819e27158b315f1ee2473 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 13 Oct 2015 14:35:48 +0200 Subject: ARM: dts: sun8i: Make et-q8-v1.6.dts a symlink to q8-tablet.dts A33 Q8 tablets with the et-q8-v1.6 pcb will work fine with the generic q8-tablet.dts and given the many variants of PCBs found in Q8 tablets using such a specific dts name was a mistake in hindsight. We cannot just drop the et-q8-v1.6.dtb as existing u-boot configs may very well point to it. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts | 89 +----------------------------- 1 file changed, 1 insertion(+), 88 deletions(-) mode change 100644 => 120000 arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts deleted file mode 100644 index 19db844863bb..000000000000 --- a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright 2015 Vishnu Patekar - * Vishnu Patekar - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; -#include "sun8i-a33.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include -#include -#include - -/ { - model = "ET Q8 Quad Core Tablet (v1.6)"; - compatible = "et,q8-v1.6", "allwinner,sun8i-a33"; - - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&lradc { - vref-supply = <®_vcc3v0>; - status = "okay"; - - button@200 { - label = "Volume Up"; - linux,code = ; - channel = <0>; - voltage = <200000>; - }; - - button@400 { - label = "Volume Down"; - linux,code = ; - channel = <0>; - voltage = <400000>; - }; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts new file mode 120000 index 000000000000..4519fd791a8f --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a33-et-q8-v1.6.dts @@ -0,0 +1 @@ +sun8i-a33-q8-tablet.dts \ No newline at end of file -- cgit v1.2.3-70-g09d2 From 39140480b66b49a6a0e7dadc4b9cd738395a8c4f Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 13 Oct 2015 14:37:45 +0200 Subject: ARM: dts: sun6i: Turn on gmac on Colombus We've everything we need to support the gmac on Colombus, turn it on. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-colombus.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 813f715eff5c..f9cf36888d93 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -76,6 +76,18 @@ status = "okay"; }; +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + &i2c0 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; -- cgit v1.2.3-70-g09d2 From 8a880ee6dab647b9acdced3d4d5bcdbafca78254 Mon Sep 17 00:00:00 2001 From: Adam Sampson Date: Sat, 10 Oct 2015 21:15:21 +0100 Subject: ARM: dts: sun7i: Add regulator configuration for pcDuino v3 Nano The power configuration on this board is the same as the pcDuino v3. This will enable frequency/voltage scaling over the standard A20 operating points from 144 MHz to 960 MHz. Tested using cpufreq-ljt-stress-test on two pcDuino v3 Nano boards; also tested successfully with voltages reduced by 0.025 V. Signed-off-by: Adam Sampson Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 35 ++++++++++++++++++++++++--- 1 file changed, 31 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index b3047783eb97..beac431aa594 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -82,6 +82,10 @@ status = "okay"; }; +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + &ehci0 { status = "okay"; }; @@ -108,13 +112,9 @@ status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp209"; reg = <0x34>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - - interrupt-controller; - #interrupt-cells = <1>; }; }; @@ -171,6 +171,33 @@ status = "okay"; }; +#include "axp209.dtsi" + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-pll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + /* A single regulator (U24) powers both USB host ports. */ ®_usb1_vbus { pinctrl-0 = <&usb1_vbus_pin_pcduino3_nano>; -- cgit v1.2.3-70-g09d2 From 976d84fce6aa1e5bf92b8d06d69014ac45fd5fad Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Oct 2015 22:48:56 +0800 Subject: ARM: dts: sun6i: hummingbird: Fix VDD-CPU and VDD-GPU regulator names The VDD-CPU and VDD-GPU regulators were incorrectly swapped. Fixes: bab03561224ba ("ARM: dts: sun6i: hummingbird: Add AXP221 regulator nodes") Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index f9d9fc07bc63..e25d4924dbe7 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -191,18 +191,18 @@ regulator-name = "vcc-3v0"; }; - vdd_cpu: dcdc2 { + vdd_gpu: dcdc2 { regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; + regulator-name = "vdd-gpu"; }; - vdd_gpu: dcdc3 { + vdd_cpu: dcdc3 { regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; + regulator-name = "vdd-cpu"; }; vdd_sys_dll: dcdc4 { -- cgit v1.2.3-70-g09d2 From 6ea0d8d829094e1743f80435e0902119cc670847 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Oct 2015 22:48:58 +0800 Subject: ARM: dts: sun6i: hummingbird: Use axp22x.dtsi for AXP221 regulators Now that we have axp22x.dtsi describing common axp22x hardware, use it and reference the nodes instead of declaring the whole tree. Also drop the "always-on" from the vdd-gpu regulator, since we don't support the GPU anyway. And add a regulator reference for cpu0. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 113 ++++++++++++++-------------- 1 file changed, 56 insertions(+), 57 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index e25d4924dbe7..a9b87ae89855 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -69,6 +69,10 @@ }; }; +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + &ehci0 { status = "okay"; }; @@ -121,7 +125,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; - vmmc-supply = <&vcc_3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; @@ -136,7 +140,7 @@ &mmc1 { pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; - vmmc-supply = <&vcc_wifi>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&wifi_pwrseq>; bus-width = <4>; non-removable; @@ -173,68 +177,63 @@ &p2wi { status = "okay"; - axp221: pmic@68 { + axp22x: pmic@68 { compatible = "x-powers,axp221"; reg = <0x68>; interrupt-parent = <&nmi_intc>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - #interrupt-cells = <1>; - - regulators { - x-powers,dcdc-freq = <3000>; - - vcc_3v0: dcdc1 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; - }; - - vdd_gpu: dcdc2 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-gpu"; - }; - - vdd_cpu: dcdc3 { - regulator-always-on; - regulator-min-microvolt = <700000>; - regulator-max-microvolt = <1320000>; - regulator-name = "vdd-cpu"; - }; - - vdd_sys_dll: dcdc4 { - regulator-always-on; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-name = "vdd-sys-dll"; - }; - - vcc_dram: dcdc5 { - regulator-always-on; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-name = "vcc-dram"; - }; - - vcc_wifi: aldo1 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-name = "vcc_wifi"; - }; - - avcc: aldo3 { - regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "avcc"; - }; - }; }; }; +#include "axp22x.dtsi" + +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + ®_usb1_vbus { gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; -- cgit v1.2.3-70-g09d2 From d92ff4228c57cf781170562fda431163e9f72760 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sat, 10 Oct 2015 22:48:59 +0800 Subject: ARM: dts: sun6i: hummingbird: Enable AXP221 DC5LDO regulator as "vdd-cpus" The DC5LDO regulator supplies VDD-CPUS, which is for the embedded controller in the A31 SoC. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index a9b87ae89855..9a74637f677f 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -200,6 +200,12 @@ regulator-name = "avcc"; }; +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + ®_dcdc1 { regulator-always-on; regulator-min-microvolt = <3000000>; -- cgit v1.2.3-70-g09d2 From 9d45708f5adb940432bc99325d67ddc813bc4b22 Mon Sep 17 00:00:00 2001 From: Murali Karicheri Date: Tue, 13 Oct 2015 13:42:43 -0700 Subject: ARM: dts: keystone: enable accumulator channels Add low priority accumulator channel that can monitor multiple QMSS queues. User for example could use the accumular queue for Netcp Rx completion. While at it, also add an extra line end of each top level node in DTS to make it more readable. Signed-off-by: Murali Karicheri Signed-off-by: Santosh Shilimkar --- arch/arm/boot/dts/k2e-netcp.dtsi | 23 +++++++++++++++++++++++ arch/arm/boot/dts/k2hk-netcp.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/k2l-netcp.dtsi | 23 +++++++++++++++++++++++ 3 files changed, 70 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/k2e-netcp.dtsi b/arch/arm/boot/dts/k2e-netcp.dtsi index b13b3c94e7fc..ac990f679725 100644 --- a/arch/arm/boot/dts/k2e-netcp.dtsi +++ b/arch/arm/boot/dts/k2e-netcp.dtsi @@ -72,7 +72,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +93,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2hk-netcp.dtsi b/arch/arm/boot/dts/k2hk-netcp.dtsi index 77a32c3c17e4..f86d6ddb832b 100644 --- a/arch/arm/boot/dts/k2hk-netcp.dtsi +++ b/arch/arm/boot/dts/k2hk-netcp.dtsi @@ -47,6 +47,7 @@ qmss: qmss@2a40000 { "region", "push", "pop"; }; }; + queue-pools { qpend { qpend-0 { @@ -88,7 +89,17 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + qalloc-by-id; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -99,6 +110,19 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; }; /* qmss */ knav_dmas: knav_dmas@0 { diff --git a/arch/arm/boot/dts/k2l-netcp.dtsi b/arch/arm/boot/dts/k2l-netcp.dtsi index 6b95284d11d4..01aef230773d 100644 --- a/arch/arm/boot/dts/k2l-netcp.dtsi +++ b/arch/arm/boot/dts/k2l-netcp.dtsi @@ -72,7 +72,16 @@ qmss: qmss@2a40000 { qalloc-by-id; }; }; + accumulator { + acc-low-0 { + qrange = <480 32>; + accumulator = <0 47 16 2 50>; + interrupts = <0 226 0xf01>; + multi-queue; + }; + }; }; + descriptor-regions { #address-cells = <1>; #size-cells = <1>; @@ -83,6 +92,20 @@ qmss: qmss@2a40000 { link-index = <0x4000>; }; }; + + pdsps { + #address-cells = <1>; + #size-cells = <1>; + ranges; + pdsp0@0x2a10000 { + reg = <0x2a10000 0x1000 /*iram */ + 0x2a0f000 0x100 /*reg*/ + 0x2a0c000 0x3c8 /*intd */ + 0x2a20000 0x4000>; /*cmd*/ + id = <0>; + }; + }; + }; /* qmss */ knav_dmas: knav_dmas@0 { -- cgit v1.2.3-70-g09d2 From 9afbb3ba399f3539d03fe99620c0707acc69fd18 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Wed, 26 Aug 2015 12:35:04 -0700 Subject: ARM: dts: qcom: Remove extra reg element from iadc device This doesn't match the binding, and the driver doesn't look to be using it. Remove the extra element. CC: Ivan T. Ivanov Signed-off-by: Stephen Boyd Acked-by: Ivan T. Ivanov Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-pm8941.dtsi | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 968f1043d4f5..0fe1080aeb20 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -120,8 +120,7 @@ pm8941_iadc: iadc@3600 { compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; - reg = <0x3600 0x100>, - <0x12f1 0x1>; + reg = <0x3600 0x100>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; }; -- cgit v1.2.3-70-g09d2 From 0fbf6104e3ffbfd42f3f84d713f84f397641718e Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:30:13 +0100 Subject: ARM: dts: apq8064: remove redundant i2c pinctrl properties This patch removes i2c pinctrl properties from board which which are now mentioned in the SOC specific file. This will avoid redundant properties across multiple board fiiles. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 11 ----------- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 5 ----- arch/arm/boot/dts/qcom-apq8064.dtsi | 4 ++++ 3 files changed, 4 insertions(+), 16 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 47c0282bdfca..80ab5b88b0f4 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -13,15 +13,6 @@ }; soc { - pinctrl@800000 { - i2c1_pins: i2c1 { - mux { - pins = "gpio20", "gpio21"; - function = "gsbi1"; - }; - }; - }; - rpm@108000 { regulators { vin_lvs1_3_6-supply = <&pm8921_s4>; @@ -96,8 +87,6 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom: eeprom@50 { compatible = "24c02"; diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index f3100da082b2..b701f33436bb 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -119,8 +119,6 @@ qcom,mode = ; i2c3: i2c@16280000 { status = "okay"; - pinctrl-0 = <&i2c3_pins>; - pinctrl-names = "default"; }; }; @@ -131,8 +129,6 @@ i2c@12460000 { status = "okay"; clock-frequency = <200000>; - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; eeprom: eeprom@52 { compatible = "atmel,24c128"; @@ -148,7 +144,6 @@ serial@16540000 { status = "ok"; - pinctrl-names = "default"; pinctrl-0 = <&uart_pins>; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index d2e94d647c27..53d531189433 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -213,6 +213,8 @@ i2c1: i2c@12460000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c1_pins>; + pinctrl-names = "default"; reg = <0x12460000 0x1000>; interrupts = <0 194 IRQ_TYPE_NONE>; clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; @@ -258,6 +260,8 @@ ranges; i2c3: i2c@16280000 { compatible = "qcom,i2c-qup-v1.1.1"; + pinctrl-0 = <&i2c3_pins>; + pinctrl-names = "default"; reg = <0x16280000 0x1000>; interrupts = ; clocks = <&gcc GSBI3_QUP_CLK>, -- cgit v1.2.3-70-g09d2 From e28ce3cc988c39574b84109f4c3faea4fcb97e52 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:30:38 +0100 Subject: ARM: dts: ifc6410: remove unnecessary eeprom label This patch removes unnecessary eeprom label, which is not used anywhere in the board file. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index b701f33436bb..2ad2ab87ead5 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -130,7 +130,7 @@ status = "okay"; clock-frequency = <200000>; - eeprom: eeprom@52 { + eeprom@52 { compatible = "atmel,24c128"; reg = <0x52>; pagesize = <32>; -- cgit v1.2.3-70-g09d2 From 2c9c2e5abb3df12f12920f61a28e413ef9a86f56 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:30:59 +0100 Subject: ARM: dts: qs600: remove unnecessary eeprom label This patch removes unnecessary eeprom label, which is not used anywhere in the board file. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 80ab5b88b0f4..bdea7472a8fd 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -88,7 +88,7 @@ status = "okay"; clock-frequency = <200000>; - eeprom: eeprom@50 { + eeprom@50 { compatible = "24c02"; reg = <0x50>; pagesize = <32>; -- cgit v1.2.3-70-g09d2 From bbf89b96d5c6ad60f500128df677522721cb0160 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:19 +0100 Subject: ARM: dts: apq8064: add pm8921 rtc This patch adds rtc node for pmic8921. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 53d531189433..add8508fec79 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -365,6 +365,14 @@ <136 1>, <137 1>, <138 1>, <139 1>; }; + rtc@11d { + compatible = "qcom,pm8921-rtc"; + interrupt-parent = <&pmicintc>; + interrupts = <39 1>; + reg = <0x11d>; + allow-set-time; + }; + }; }; -- cgit v1.2.3-70-g09d2 From 3050c5f5afd409c299cfeba815b6f91753c4c112 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:25 +0100 Subject: ARM: dts: apq8064: add pm8921 pwrkey support This patch adds support to pm8921 power button. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index add8508fec79..f665a2505940 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -373,6 +373,14 @@ allow-set-time; }; + pwrkey@1c { + compatible = "qcom,pm8921-pwrkey"; + reg = <0x1c>; + interrupt-parent = <&pmicintc>; + interrupts = <50 1>, <51 1>; + debounce = <15625>; + pull-up; + }; }; }; -- cgit v1.2.3-70-g09d2 From 7648c7bf33f2af8fd6f51f1c56d21b9ff9b2ee35 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:34 +0100 Subject: ARM: dts: apq8064: Prefix the gsbi6 uart pins correctly Usage of generic names like "uart_pins" is confusing to the reader, given the fact that there could be more than one uart on APQ8064. This patch adds gsbi prefix to uart pinctrl nodes so as to avoid such confusion. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +- arch/arm/boot/dts/qcom-apq8064.dtsi | 9 ++++++++- 2 files changed, 9 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 2ad2ab87ead5..56eaf5a90035 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -145,7 +145,7 @@ serial@16540000 { status = "ok"; pinctrl-names = "default"; - pinctrl-0 = <&uart_pins>; + pinctrl-0 = <&gsbi6_uart_4pins>; }; }; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index f665a2505940..7aa010d93e79 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -127,7 +127,14 @@ }; }; - uart_pins: uart_pins { + gsbi6_uart_2pins: gsbi6_uart_2pins { + mux { + pins = "gpio14", "gpio15"; + function = "gsbi6"; + }; + }; + + gsbi6_uart_4pins: gsbi6_uart_4pins { mux { pins = "gpio14", "gpio15", "gpio16", "gpio17"; function = "gsbi6"; -- cgit v1.2.3-70-g09d2 From 892d6733b89ad11b0f7e939e6c6283163f859116 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:40 +0100 Subject: ARM: dts: apq8064: add missing gsbi7 uart pinctrl This patch adds missing gsbi7 uart pinctrl, this is the default debug uart on most boards. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 7aa010d93e79..a4c1762b53ea 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -140,6 +140,20 @@ function = "gsbi6"; }; }; + + gsbi7_uart_2pins: gsbi7_uart_2pins { + mux { + pins = "gpio82", "gpio83"; + function = "gsbi7"; + }; + }; + + gsbi7_uart_4pins: gsbi7_uart_4pins { + mux { + pins = "gpio82", "gpio83", "gpio84", "gpio85"; + function = "gsbi7"; + }; + }; }; intc: interrupt-controller@2000000 { -- cgit v1.2.3-70-g09d2 From 17dbc5544e7650722c5715c63f2cf9be43ad144c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:47 +0100 Subject: ARM: dts: ifc6410: Add missing pinctrl to gsbi7 uart This patch adds missing 2pin uart pinctrl property to gsbi7 uart on IFC6410. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 56eaf5a90035..c1d5bd7dd759 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -154,6 +154,8 @@ qcom,mode = ; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; -- cgit v1.2.3-70-g09d2 From be87cd0e80e20f5167f3a98613e8be65dfe19879 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:53 +0100 Subject: ARM: dts: qs600: Add missing pinctrl property for gsbi7 uart This patch adds missing 2pin uart pinctrl property to gsbi7 uart on CM-QS600. Signed-off-by: Srinivas Kandagatla Acked-by: Igor Grinberg Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index bdea7472a8fd..8aac3be1bf24 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -101,6 +101,8 @@ qcom,mode = ; serial@16640000 { status = "ok"; + pinctrl-names = "default"; + pinctrl-0 = <&gsbi7_uart_2pins>; }; }; -- cgit v1.2.3-70-g09d2 From 03f00be5babcf0ac6747beedbe5fa73a3abd3cdb Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:31:59 +0100 Subject: ARM: dts: ifc6410: Add pwrseq support for WLAN This patch adds pwrseq for WLAN which resets the WLAN just before the SDIO bus is up. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index c1d5bd7dd759..9c71a51a7079 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -1,5 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" #include +#include / { model = "Qualcomm APQ8064/IFC6410"; @@ -14,6 +15,17 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -207,6 +219,21 @@ status = "okay"; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = ; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -228,6 +255,7 @@ status = "okay"; vmmc-supply = <&ext_3p3v>; vqmmc-supply = <&pm8921_lvs1>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; -- cgit v1.2.3-70-g09d2 From f0b6d95062a6674a58e3aa0c19d170e9ab92e44f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:32:05 +0100 Subject: ARM: dts: qs600: add pwrseq support to WLAN Add pwrseq support to sdcc4 which would enable a proper reset of WLAN without ugly hacks in the board support file. Signed-off-by: Srinivas Kandagatla Acked-by: Igor Grinberg Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 32 +++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index 8aac3be1bf24..cc9d9423a4c0 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -1,4 +1,6 @@ #include "qcom-apq8064-v2.0.dtsi" +#include +#include / { model = "CompuLab CM-QS600"; @@ -12,6 +14,20 @@ stdout-path = "serial0:115200n8"; }; + pwrseq { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "simple-bus"; + + sdcc4_pwrseq: sdcc4_pwrseq { + pinctrl-names = "default"; + pinctrl-0 = <&wlan_default_gpios>; + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>; + }; + }; + soc { rpm@108000 { regulators { @@ -154,6 +170,21 @@ regulator-always-on; }; + qcom,ssbi@500000 { + pmic@0 { + gpio@150 { + wlan_default_gpios: wlan-gpios { + pios { + pins = "gpio43"; + function = "normal"; + bias-disable; + power-source = ; + }; + }; + }; + }; + }; + amba { /* eMMC */ sdcc1: sdcc@12400000 { @@ -172,6 +203,7 @@ status = "okay"; vmmc-supply = <&v3p3_fixed>; vqmmc-supply = <&v3p3_fixed>; + mmc-pwrseq = <&sdcc4_pwrseq>; }; }; }; -- cgit v1.2.3-70-g09d2 From 2630a52fd5c996cfba775346ad5a218c4b7dc147 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:32:11 +0100 Subject: ARM: dts: apq8064-ifc6410: add notify led support. This patch adds notify led support on IFC6410, whose trigger can be configured from userspace. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 9c71a51a7079..11ac608b6d50 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -26,6 +26,18 @@ }; }; + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <¬ify_led>; + + led@1 { + label = "apq8064:green:user1"; + gpios = <&pm8921_gpio 18 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + soc { pinctrl@800000 { card_detect: card_detect { @@ -230,6 +242,15 @@ power-source = ; }; }; + + notify_led: nled { + pios { + pins = "gpio18"; + function = "normal"; + bias-disable; + power-source = ; + }; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 8eb84480cc6df9f4b5cbce51e20d86e73f04575c Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 18 Sep 2015 13:32:18 +0100 Subject: ARM: dts: qs600: Add SD card detect support. This patch adds SD card detect support. Signed-off-by: Srinivas Kandagatla Acked-by: Igor Grinberg Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts index cc9d9423a4c0..03784f1366e5 100644 --- a/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts @@ -29,6 +29,16 @@ }; soc { + pinctrl@800000 { + card_detect: card_detect { + mux { + pins = "gpio26"; + function = "gpio"; + bias-disable; + }; + }; + }; + rpm@108000 { regulators { vin_lvs1_3_6-supply = <&pm8921_s4>; @@ -197,6 +207,9 @@ sdcc3: sdcc@12180000 { status = "okay"; vmmc-supply = <&v3p3_fixed>; + pinctrl-names = "default"; + pinctrl-0 = <&card_detect>; + cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>; }; /* WLAN */ sdcc4: sdcc@121c0000 { -- cgit v1.2.3-70-g09d2 From 89c7e671289d142cff2cb0b98ef7c92de5deee03 Mon Sep 17 00:00:00 2001 From: Rajendra Nayak Date: Thu, 1 Oct 2015 14:56:02 +0530 Subject: arm: dts: qcom: Add #power-domain-cells property clock controller nodes which also support power domains (gdscs') need to have a #power-domain-cells property. Add these for gcc and mmcc nodes of msm8974, gcc of apq8084 and msm8916. Also update gcc and mmcc bindings for it. Signed-off-by: Rajendra Nayak Acked-by: Stephen Boyd Signed-off-by: Andy Gross --- Documentation/devicetree/bindings/clock/qcom,gcc.txt | 4 ++++ Documentation/devicetree/bindings/clock/qcom,mmcc.txt | 4 ++++ arch/arm/boot/dts/qcom-apq8084.dtsi | 1 + arch/arm/boot/dts/qcom-msm8974.dtsi | 2 ++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 1 + 5 files changed, 12 insertions(+) (limited to 'arch') diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc.txt b/Documentation/devicetree/bindings/clock/qcom,gcc.txt index 54c23f34f194..152dfaab2575 100644 --- a/Documentation/devicetree/bindings/clock/qcom,gcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,gcc.txt @@ -18,10 +18,14 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional properties : +- #power-domain-cells : shall contain 1 + Example: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; reg = <0x900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt index 29ebf84d25af..34e7614d5074 100644 --- a/Documentation/devicetree/bindings/clock/qcom,mmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,mmcc.txt @@ -14,10 +14,14 @@ Required properties : - #clock-cells : shall contain 1 - #reset-cells : shall contain 1 +Optional properties : +- #power-domain-cells : shall contain 1 + Example: clock-controller@4000000 { compatible = "qcom,mmcc-msm8960"; reg = <0x4000000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; }; diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi index 0554fbd72c40..fcffecae3e67 100644 --- a/arch/arm/boot/dts/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi @@ -221,6 +221,7 @@ compatible = "qcom,gcc-apq8084"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index f6791269dc65..0df5b62e93c7 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -233,6 +233,7 @@ compatible = "qcom,gcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfc400000 0x4000>; }; @@ -245,6 +246,7 @@ compatible = "qcom,mmcc-msm8974"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0xfd8c0000 0x6000>; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5911de008dd5..ac006e895e08 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -99,6 +99,7 @@ compatible = "qcom,gcc-msm8916"; #clock-cells = <1>; #reset-cells = <1>; + #power-domain-cells = <1>; reg = <0x1800000 0x80000>; }; -- cgit v1.2.3-70-g09d2 From 982afd8ba51153327c6d9dcacda6d0f3c5e2f5e2 Mon Sep 17 00:00:00 2001 From: Courtney Cavin Date: Thu, 30 Jul 2015 10:53:57 -0700 Subject: ARM: dts: qcom-pm8941: Add charger node Signed-off-by: Courtney Cavin Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-pm8941.dtsi | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-pm8941.dtsi b/arch/arm/boot/dts/qcom-pm8941.dtsi index 0fe1080aeb20..b0d443999fcc 100644 --- a/arch/arm/boot/dts/qcom-pm8941.dtsi +++ b/arch/arm/boot/dts/qcom-pm8941.dtsi @@ -26,6 +26,27 @@ bias-pull-up; }; + charger@1000 { + compatible = "qcom,pm8941-charger"; + reg = <0x1000 0x700>; + interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>, + <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "chg-done", + "chg-fast", + "chg-trkl", + "bat-temp-ok", + "bat-present", + "chg-gone", + "usb-valid", + "dc-valid"; + }; + pm8941_gpios: gpios@c000 { compatible = "qcom,pm8941-gpio"; reg = <0xc000 0x2400>; -- cgit v1.2.3-70-g09d2 From 04edde250c3753798475f0a4dc0275dd52f707bd Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Tue, 13 Oct 2015 14:02:00 +0200 Subject: ARM: dts: msm8974: fix typo in "disabled" property Replace "disable" by "disabled" in the Qualcomm MSM8974 dtsi Signed-off-by: Michael Opdenacker Signed-off-by: Andy Gross --- arch/arm/boot/dts/qcom-msm8974.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 0df5b62e93c7..57e6fcab4089 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -315,7 +315,7 @@ }; blsp_i2c11: i2c@f9967000 { - status = "disable"; + status = "disabled"; compatible = "qcom,i2c-qup-v2.1.1"; reg = <0xf9967000 0x1000>; interrupts = <0 105 IRQ_TYPE_NONE>; -- cgit v1.2.3-70-g09d2 From f6d24bf30c00e273276a3790c3c50d192f850788 Mon Sep 17 00:00:00 2001 From: Stanimir Varbanov Date: Tue, 25 Aug 2015 18:37:42 +0300 Subject: arm64: dts: qcom: Add RNG device tree node Adds rng device tree node for msm8916 SoCs. Signed-off-by: Stanimir Varbanov Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 5911de008dd5..72be4baa8fe7 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -390,6 +390,13 @@ interrupt-controller; #interrupt-cells = <4>; }; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; }; }; -- cgit v1.2.3-70-g09d2 From 9f43020dc43e326203ce036ad19e6608ddb421f2 Mon Sep 17 00:00:00 2001 From: Andy Gross Date: Thu, 27 Aug 2015 15:39:14 -0500 Subject: arm64: dts: qcom: Add 8x16 Serial UART1 node This patch adds the nodes required to support the UART1 node on the MSM8916 and also fixes the sleep pins function for UART2. Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 1 + arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 26 +++++++++++++++++++++++++- arch/arm64/boot/dts/qcom/msm8916.dtsi | 9 +++++++++ 3 files changed, 35 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 66804ffbc6d2..3fc3be447edd 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -19,6 +19,7 @@ / { aliases { serial0 = &blsp1_uart2; + serial1 = &blsp1_uart1; }; chosen { diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 568956859088..42941b977c48 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -13,6 +13,30 @@ &msmgpio { + blsp1_uart1_default: blsp1_uart1_default { + pinmux { + function = "blsp_uart1"; + pins = "gpio0", "gpio1"; + }; + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <16>; + bias-disable; + }; + }; + + blsp1_uart1_sleep: blsp1_uart1_sleep { + pinmux { + function = "gpio"; + pins = "gpio0", "gpio1"; + }; + pinconf { + pins = "gpio0", "gpio1"; + drive-strength = <2>; + bias-pull-down; + }; + }; + blsp1_uart2_default: blsp1_uart2_default { pinmux { function = "blsp_uart2"; @@ -27,7 +51,7 @@ blsp1_uart2_sleep: blsp1_uart2_sleep { pinmux { - function = "blsp_uart2"; + function = "gpio"; pins = "gpio4", "gpio5"; }; pinconf { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 72be4baa8fe7..85f7bee33c18 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -102,6 +102,15 @@ reg = <0x1800000 0x80000>; }; + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x78af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + status = "disabled"; + }; + blsp1_uart2: serial@78b0000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x78b0000 0x200>; -- cgit v1.2.3-70-g09d2 From 5941c9bb9fc3c1327b7e7315903959cdff6e91c4 Mon Sep 17 00:00:00 2001 From: Georgi Djakov Date: Thu, 1 Oct 2015 12:59:31 +0300 Subject: arm64: dts: qcom: Enable eMMC on apq8016-sbc board Enable the eMMC on the APQ8016 SBC board (also known as DragonBoard 410c), so that we can use its internal storage. Signed-off-by: Georgi Djakov Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 3fc3be447edd..8cea426e58af 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -86,3 +86,7 @@ }; }; }; + +&sdhc_1 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From dce4f63b1208d061b7efdcf1780923c2d70ba386 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 9 Oct 2015 09:54:45 +0100 Subject: arm64: dts: fix i2c pinconf sleep state function This patch fixes the i2c pinctrl sleep state by changing the pinconf function to be in gpio mode rather than i2c. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index 42941b977c48..a6105d742e9e 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -279,7 +279,7 @@ i2c4_sleep: i2c4_sleep { pinmux { - function = "blsp_i2c4"; + function = "gpio"; pins = "gpio14", "gpio15"; }; pinconf { -- cgit v1.2.3-70-g09d2 From 7f5b09216831c7c138589c5f77dde7416e687130 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 9 Oct 2015 09:55:05 +0100 Subject: arm64: dts: qcom: Add msm8916 I2C nodes. This patch adds missing support for i2c0 and i2c6, this support is required to connect the i2c slaves on LS expansion on DB410c. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/msm8916-pins.dtsi | 48 ++++++++++++++++++++++++++++++ arch/arm64/boot/dts/qcom/msm8916.dtsi | 30 +++++++++++++++++++ 2 files changed, 78 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi index a6105d742e9e..49ec55a37614 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916-pins.dtsi @@ -265,6 +265,30 @@ }; }; + i2c2_default: i2c2_default { + pinmux { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c2_sleep: i2c2_sleep { + pinmux { + function = "gpio"; + pins = "gpio6", "gpio7"; + }; + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + i2c4_default: i2c4_default { pinmux { function = "blsp_i2c4"; @@ -289,6 +313,30 @@ }; }; + i2c6_default: i2c6_default { + pinmux { + function = "blsp_i2c6"; + pins = "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + + i2c6_sleep: i2c6_sleep { + pinmux { + function = "gpio"; + pins = "gpio22", "gpio23"; + }; + pinconf { + pins = "gpio22", "gpio23"; + drive-strength = <2>; + bias-disable = <0>; + }; + }; + sdhc2_cd_pin { sdc2_cd_on: cd_on { pinmux { diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 85f7bee33c18..2c862347f030 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -233,6 +233,21 @@ status = "disabled"; }; + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b6000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp_i2c4: i2c@78b8000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x78b8000 0x1000>; @@ -248,6 +263,21 @@ status = "disabled"; }; + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78ba000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + sdhc_1: sdhci@07824000 { compatible = "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; -- cgit v1.2.3-70-g09d2 From 7c6764b05217b2d679da4a84f69c607f3477b232 Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 9 Oct 2015 09:55:21 +0100 Subject: arm64: dts: apq8016-sbc: enable i2c buses on LS and HS This patch enables i2c buses on low speed and high speed expansion connectors on DB410C. Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 8cea426e58af..1c24cd240b9c 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -34,6 +34,21 @@ pinctrl-1 = <&blsp1_uart2_sleep>; }; + i2c@78b6000 { + /* On Low speed expansion */ + status = "okay"; + }; + + i2c@78b8000 { + /* On High speed expansion */ + status = "okay"; + }; + + i2c@78ba000 { + /* On Low speed expansion */ + status = "okay"; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&msmgpio_leds>, -- cgit v1.2.3-70-g09d2 From 00a9e053da0b9e150b7f8fefa3c409d7e71ce48f Mon Sep 17 00:00:00 2001 From: Srinivas Kandagatla Date: Fri, 9 Oct 2015 09:55:29 +0100 Subject: arm64: dts: apq8016-sbc: enable spi buses on LS and HS This patch enables spi buses on low speed and high speed expansion connectors on DB410C Signed-off-by: Srinivas Kandagatla Signed-off-by: Andy Gross --- arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index 1c24cd240b9c..6b8abbe68746 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -49,6 +49,16 @@ status = "okay"; }; + spi@78b7000 { + /* On High speed expansion */ + status = "okay"; + }; + + spi@78b9000 { + /* On Low speed expansion */ + status = "okay"; + }; + leds { pinctrl-names = "default"; pinctrl-0 = <&msmgpio_leds>, -- cgit v1.2.3-70-g09d2 From 67e56c5651d30cd5adddcf32ab41c71dabf2bcec Mon Sep 17 00:00:00 2001 From: James Liao Date: Mon, 10 Aug 2015 17:50:28 +0800 Subject: arm64: dts: mt8173: Add subsystem clock controller device nodes This patch adds device nodes providing subsystem clocks on MT8173, includes mmsys, imgsys, vdecsys, vencsys and vencltsys. Signed-off-by: James Liao Reviewed-by: Daniel Kurtz Acked-by: Sascha Hauer Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 37 ++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 4bce1676fbd1..42540b208a8f 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -116,6 +116,13 @@ clock-output-names = "clk32k"; }; + cpum_ck: oscillator@2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "cpum_ck"; + }; + timer { compatible = "arm,armv8-timer"; interrupt-parent = <&gic>; @@ -500,6 +507,36 @@ clock-names = "source", "hclk"; status = "disabled"; }; + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys", "syscon"; + reg = <0 0x14000000 0 0x1000>; + #clock-cells = <1>; + }; + + imgsys: clock-controller@15000000 { + compatible = "mediatek,mt8173-imgsys", "syscon"; + reg = <0 0x15000000 0 0x1000>; + #clock-cells = <1>; + }; + + vdecsys: clock-controller@16000000 { + compatible = "mediatek,mt8173-vdecsys", "syscon"; + reg = <0 0x16000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencsys: clock-controller@18000000 { + compatible = "mediatek,mt8173-vencsys", "syscon"; + reg = <0 0x18000000 0 0x1000>; + #clock-cells = <1>; + }; + + vencltsys: clock-controller@19000000 { + compatible = "mediatek,mt8173-vencltsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; + }; }; }; -- cgit v1.2.3-70-g09d2 From e34573c95a1416b4f26a5cc68b1de198e6b27ad7 Mon Sep 17 00:00:00 2001 From: James Liao Date: Wed, 7 Oct 2015 17:14:41 +0800 Subject: arm64: dts: mt8173: Add clocks for SCPSYS unit Add clocks needed by Mediatek VENC and VENC_LT power domianis. These clocks were needed by accessing subsystem's registers, so they need to be enabled before power on these subsystems. Signed-off-by: James Liao Signed-off-by: Matthias Brugger --- arch/arm64/boot/dts/mediatek/mt8173.dtsi | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index 42540b208a8f..ec4a99dc7c28 100644 --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi @@ -234,8 +234,10 @@ #power-domain-cells = <1>; reg = <0 0x10006000 0 0x1000>; clocks = <&clk26m>, - <&topckgen CLK_TOP_MM_SEL>; - clock-names = "mfg", "mm"; + <&topckgen CLK_TOP_MM_SEL>, + <&topckgen CLK_TOP_VENC_SEL>, + <&topckgen CLK_TOP_VENC_LT_SEL>; + clock-names = "mfg", "mm", "venc", "venc_lt"; infracfg = <&infracfg>; }; -- cgit v1.2.3-70-g09d2 From 49eb5926df44df6b59e07b447c0a8afda79ca881 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Thu, 1 Oct 2015 12:52:40 +0200 Subject: ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers The DTS erronously uses the wrong reg mapping and IRQ numbers for some UART, WDT and timer nodes. Fix this. Reported-by: John Wehle Signed-off-by: Carlo Caione Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/meson.dtsi | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi index 548441384d2a..8c77c87660cd 100644 --- a/arch/arm/boot/dts/meson.dtsi +++ b/arch/arm/boot/dts/meson.dtsi @@ -67,7 +67,7 @@ timer@c1109940 { compatible = "amlogic,meson6-timer"; - reg = <0xc1109940 0x14>; + reg = <0xc1109940 0x18>; interrupts = <0 10 1>; }; @@ -80,36 +80,37 @@ wdt: watchdog@c1109900 { compatible = "amlogic,meson6-wdt"; reg = <0xc1109900 0x8>; + interrupts = <0 0 1>; }; uart_AO: serial@c81004c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81004c0 0x14>; + reg = <0xc81004c0 0x18>; interrupts = <0 90 1>; clocks = <&clk81>; status = "disabled"; }; - uart_A: serial@c81084c0 { + uart_A: serial@c11084c0 { compatible = "amlogic,meson-uart"; - reg = <0xc81084c0 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084c0 0x18>; + interrupts = <0 26 1>; clocks = <&clk81>; status = "disabled"; }; - uart_B: serial@c81084dc { + uart_B: serial@c11084dc { compatible = "amlogic,meson-uart"; - reg = <0xc81084dc 0x14>; - interrupts = <0 90 1>; + reg = <0xc11084dc 0x18>; + interrupts = <0 75 1>; clocks = <&clk81>; status = "disabled"; }; - uart_C: serial@c8108700 { + uart_C: serial@c1108700 { compatible = "amlogic,meson-uart"; - reg = <0xc8108700 0x14>; - interrupts = <0 90 1>; + reg = <0xc1108700 0x18>; + interrupts = <0 93 1>; clocks = <&clk81>; status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From 8ee57b8182c4069e8b2939dde68a60536c663df1 Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Mon, 5 Oct 2015 12:53:52 +0100 Subject: ARM64: dts: vexpress: Use a symlink to vexpress-v2m-rs1.dtsi from arch=arm Commit 9ccd608070b6 "arm64: dts: add device tree for ARM SMM-A53x2 on LogicTile Express 20MG" added a new dts file to arch/arm64 which included "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi", i.e. a .dtsi supplied by arch/arm. Unfortunately this causes some issues for the split device tree repository[0], since things get moved around there. In that context the new .dts ends up at src/arm64/arm/vexpress-v2f-1xv7-ca53x2.dts while the include is at src/arm/vexpress-v2m-rs1.dtsi. The sharing of the .dtsi is legitimate since the baseboard is the same for various vexpress systems whatever processor they use. Previously I attempted to resolve this by creating a shared location for such things but we have been unable to come to a consensus on where that should be. Instead this patch simply replaces the use of ../../ in the dts /include/ with a symlink in arch/arm64/boot/dts/arm pointing to the file arch/arm/boot/dts. Since the split device tree repo will shortly be required to flatten symlinks for other reasons this will cause the dtsi file to appear in both src/arm and src/arm64 in the split repo, which is an improvement on not building for arm64 now. [0] https://git.kernel.org/cgit/linux/kernel/git/devicetree/devicetree-rebasing.git/ Signed-off-by: Ian Campbell Acked-by: Mark Rutland Cc: Rob Herring Cc: Pawel Moll Cc: Kumar Gala Cc: Liviu Dudau Cc: Sudeep Holla Cc: Lorenzo Pieralisi Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Kristina Martsenko Cc: Kevin Hilman Cc: Frank Rowand Cc: Olof Johansson Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: arm@kernel.org Cc: linux-kbuild@vger.kernel.org Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts | 2 +- arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) create mode 120000 arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts index 5b1d0181023b..bb3c26d1154d 100644 --- a/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts +++ b/arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts @@ -186,6 +186,6 @@ <0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>, <0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; - /include/ "../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi" + /include/ "vexpress-v2m-rs1.dtsi" }; }; diff --git a/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi new file mode 120000 index 000000000000..68fd0f8f1dee --- /dev/null +++ b/arch/arm64/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/vexpress-v2m-rs1.dtsi \ No newline at end of file -- cgit v1.2.3-70-g09d2 From be146412501bc2ed49183637605da97f47125696 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Oct 2015 20:31:47 +0300 Subject: ARM: dts: omap3-igep: Use OMAP3_CORE1_IOPAD pinmux macro Use the macro instead of absolute register offsets to make the code more readable as the values now match register addresses from the datasheet. Signed-off-by: Laurent Pinchart Acked-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 48 +++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index a2f97928297d..09a438ebfbbe 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -35,60 +35,60 @@ &omap3_pmx_core { uart1_pins: pinmux_uart1_pins { pinctrl-single,pins = < - 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ - 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */ + OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */ + OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */ >; }; uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */ >; }; mcbsp2_pins: pinmux_mcbsp2_pins { pinctrl-single,pins = < - 0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ - 0x10e (PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ - 0x110 (PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ - 0x112 (PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ + OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */ + OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx.mcbsp2_clkx */ + OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr.mcbsp2.dr */ + OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx.mcbsp2_dx */ >; }; mmc1_pins: pinmux_mmc1_pins { pinctrl-single,pins = < - 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ - 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ - 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ - 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ - 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ - 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ + OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */ + OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */ + OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */ + OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */ + OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */ + OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */ >; }; mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < - 0x128 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ - 0x12a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ - 0x12c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ - 0x12e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ - 0x130 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ - 0x132 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ + OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk.sdmmc2_clk */ + OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd.sdmmc2_cmd */ + OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0.sdmmc2_dat0 */ + OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1.sdmmc2_dat1 */ + OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2.sdmmc2_dat2 */ + OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3.sdmmc2_dat3 */ >; }; i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < - 0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ - 0x18c (PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ + OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ + OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */ >; }; i2c3_pins: pinmux_i2c3_pins { pinctrl-single,pins = < - 0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ - 0x194 (PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ + OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */ + OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; }; -- cgit v1.2.3-70-g09d2 From 755f121efede867a176bf016f307dc933119d620 Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Fri, 2 Oct 2015 18:31:15 +0000 Subject: ARM: bcm2835: add label for uart0 This patch adds a label for uart0 to allow changing of uart0 pins. Signed-off-by: Stefan Wahren Acked-by: Stephen Warren Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 301c73f4ca33..202939486598 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -92,7 +92,7 @@ #interrupt-cells = <2>; }; - uart@7e201000 { + uart0: uart@7e201000 { compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; -- cgit v1.2.3-70-g09d2 From 645dccb1c132d42dff26ef3d00cf0b903743d99e Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 11 Oct 2015 21:37:15 +0200 Subject: ARM: bcm2835: dt: Raspberry Pi Model B had no I2S It's the Model B rev2 that had it. Remove it. Signed-off-by: Lubomir Rintel Signed-off-by: Eric Anholt --- arch/arm/boot/dts/bcm2835-rpi-b.dts | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index ee89b79426cf..ff6b2d1c6c90 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -13,11 +13,5 @@ }; &gpio { - pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; - - /* I2S interface */ - i2s_alt2: i2s_alt2 { - brcm,pins = <28 29 30 31>; - brcm,function = ; - }; + pinctrl-0 = <&gpioout &alt0 &alt3>; }; -- cgit v1.2.3-70-g09d2 From 3f37169fb36497dec8f3fad14d835747d5552aa5 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 11 Oct 2015 21:37:16 +0200 Subject: ARM: bcm2835: dt: Add Raspberry Pi Model B rev2 This one has an extra P5 header (unpopulated) with I2S. Signed-off-by: Lubomir Rintel Signed-off-by: Eric Anholt --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts | 23 +++++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..23d649344914 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ axm5516-amarillo.dtb dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ + bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts new file mode 100644 index 000000000000..eab8b5916e8a --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -0,0 +1,23 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; + model = "Raspberry Pi Model B rev2"; + + leds { + act { + gpios = <&gpio 16 1>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>; + + /* I2S interface */ + i2s_alt2: i2s_alt2 { + brcm,pins = <28 29 30 31>; + brcm,function = ; + }; +}; -- cgit v1.2.3-70-g09d2 From 1cd99abb5c94733a43ee4dc81dd62e0f7d8c9ff0 Mon Sep 17 00:00:00 2001 From: Lubomir Rintel Date: Sun, 11 Oct 2015 21:37:17 +0200 Subject: ARM: bcm2835: dt: Add Raspberry Pi Model A+ Essentially the same as B+. Signed-off-by: Lubomir Rintel Signed-off-by: Eric Anholt --- arch/arm/boot/dts/Makefile | 3 ++- arch/arm/boot/dts/bcm2835-rpi-a-plus.dts | 30 ++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/bcm2835-rpi-a-plus.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 23d649344914..aaaf299775f9 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -59,7 +59,8 @@ dtb-$(CONFIG_ARCH_AXXIA) += \ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b.dtb \ bcm2835-rpi-b-rev2.dtb \ - bcm2835-rpi-b-plus.dtb + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts new file mode 100644 index 000000000000..b2bff43b135c --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -0,0 +1,30 @@ +/dts-v1/; +#include "bcm2835-rpi.dtsi" + +/ { + compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; + model = "Raspberry Pi Model A+"; + + leds { + act { + gpios = <&gpio 47 0>; + }; + + pwr { + label = "PWR"; + gpios = <&gpio 35 0>; + default-state = "keep"; + linux,default-trigger = "default-on"; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = ; + }; +}; -- cgit v1.2.3-70-g09d2 From b89c429c1b4c176fee1912114ec7b2785949783b Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Thu, 1 Oct 2015 17:42:20 +0200 Subject: ARM: dts: Fix RGMII pinctrl timings These new re-timing values provides a better stability on Ethernet link. Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-pinctrl.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-pinctrl.dtsi b/arch/arm/boot/dts/stih407-pinctrl.dtsi index 8fe542aa1fa4..a538ae52d32b 100644 --- a/arch/arm/boot/dts/stih407-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih407-pinctrl.dtsi @@ -216,9 +216,9 @@ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>; rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>; rxdv = <&pio2 0 ALT1 IN DE_IO 0 CLK_A>; - rxclk = <&pio2 2 ALT1 IN NICLK 500 CLK_A>; + rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>; clk125 = <&pio3 7 ALT4 IN NICLK 0 CLK_A>; - phyclk = <&pio2 3 ALT4 OUT NICLK 1750 CLK_B>; + phyclk = <&pio2 3 ALT4 OUT NICLK 1250 CLK_B>; }; }; -- cgit v1.2.3-70-g09d2 From ab511d7df1a0f73c4ccccd5655c84efdb7f816c1 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Thu, 1 Oct 2015 17:44:41 +0200 Subject: ARM: dts: Add Ethernet node to STiH407 family STiH407 family uses the Synopsys IP. Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-family.dtsi | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi index 582154bbe3f3..c944d3a5906d 100644 --- a/arch/arm/boot/dts/stih407-family.dtsi +++ b/arch/arm/boot/dts/stih407-family.dtsi @@ -653,5 +653,32 @@ clocks = <&clk_sysin>; status = "okay"; }; + + ethernet0: dwmac@9630000 { + device_type = "network"; + status = "disabled"; + compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710"; + reg = <0x9630000 0x8000>, <0x80 0x4>; + reg-names = "stmmaceth", "sti-ethconf"; + + st,syscon = <&syscfg_sbc_reg 0x80>; + st,gmac_en; + resets = <&softreset STIH407_ETH1_SOFTRESET>; + reset-names = "stmmaceth"; + + interrupts = , + ; + interrupt-names = "macirq", "eth_wake_irq"; + + /* DMA Bus Mode */ + snps,pbl = <8>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii1>; + + clock-names = "stmmaceth", "sti-ethclk"; + clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>, + <&clk_s_c0_flexgen CLK_ETH_PHY>; + }; }; }; -- cgit v1.2.3-70-g09d2 From 60dfa24588ee76b85f48c2adab5cdf9b868dc629 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Thu, 1 Oct 2015 17:45:46 +0200 Subject: ARM: dts: Enable Ethernet on STi's B2120 boards These boards are mounted with Realtek RTL8367 switch. We consider the bootloader will have intiliazed the switch before jumping into the kernel, so we declare it as a fixed link. Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih407-b2120.dts | 1 + arch/arm/boot/dts/stih410-b2120.dts | 1 + arch/arm/boot/dts/stihxxx-b2120.dtsi | 6 ++++++ 3 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih407-b2120.dts b/arch/arm/boot/dts/stih407-b2120.dts index 6d93475be554..c8ad905d0309 100644 --- a/arch/arm/boot/dts/stih407-b2120.dts +++ b/arch/arm/boot/dts/stih407-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; }; diff --git a/arch/arm/boot/dts/stih410-b2120.dts b/arch/arm/boot/dts/stih410-b2120.dts index 8af1e73c0532..118ac284fc4b 100644 --- a/arch/arm/boot/dts/stih410-b2120.dts +++ b/arch/arm/boot/dts/stih410-b2120.dts @@ -25,6 +25,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi index ab029f7239b2..ad21a4293a33 100644 --- a/arch/arm/boot/dts/stihxxx-b2120.dtsi +++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi @@ -87,5 +87,11 @@ status = "okay"; }; + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; -- cgit v1.2.3-70-g09d2 From 69e7c854c7d4ea30c4e17cfa890946e16c5a36f0 Mon Sep 17 00:00:00 2001 From: Maxime Coquelin Date: Thu, 1 Oct 2015 17:48:19 +0200 Subject: ARM: dts: Enable Ethernet on STi's B2199 board The B2199 board is mounted with Realtek RTL8367 switch. We consider the bootloader will have intiliazed the switch before jumping into the kernel, so we declare it as a fixed link. Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih418-b2199.dts | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih418-b2199.dts b/arch/arm/boot/dts/stih418-b2199.dts index 82eee39ccb31..772d2bb07e5f 100644 --- a/arch/arm/boot/dts/stih418-b2199.dts +++ b/arch/arm/boot/dts/stih418-b2199.dts @@ -24,6 +24,7 @@ aliases { ttyAS0 = &sbc_serial0; + ethernet0 = ðernet0; }; soc { @@ -101,5 +102,12 @@ st_dwc3: dwc3@8f94000 { status = "okay"; }; + + ethernet0: dwmac@9630000 { + st,tx-retime-src = "clkgen"; + status = "okay"; + phy-mode = "rgmii"; + fixed-link = <0 1 1000 0 0>; + }; }; }; -- cgit v1.2.3-70-g09d2 From 848dd6a87a10bd24b5a4c8b84eaba3cdd0ec7a19 Mon Sep 17 00:00:00 2001 From: Gabriel Fernandez Date: Wed, 7 Oct 2015 11:08:00 +0200 Subject: ARM: STi: DT: Add support for stih418 A9 pll Add support for new PLL-type for stih418 A9-PLL. Signed-off-by: Gabriel Fernandez Signed-off-by: Maxime Coquelin --- arch/arm/boot/dts/stih418-clock.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/stih418-clock.dtsi b/arch/arm/boot/dts/stih418-clock.dtsi index 148e1772465f..ae6d9978ea19 100644 --- a/arch/arm/boot/dts/stih418-clock.dtsi +++ b/arch/arm/boot/dts/stih418-clock.dtsi @@ -44,7 +44,7 @@ clockgen_a9_pll: clockgen-a9-pll { #clock-cells = <1>; - compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32"; + compatible = "st,stih418-plls-c28-a9", "st,clkgen-plls-c32"; clocks = <&clk_sysin>; -- cgit v1.2.3-70-g09d2 From 36dd6066c05db82da84b7c45113583b7fa57f4fa Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Thu, 15 Oct 2015 18:05:32 +0900 Subject: ARM: dts: uniphier: change the external bus address mapping In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces 0x00000000 - 0x0fffffff 0x40000000 - 0x4fffffff are both mapped to the external bus (also called system bus), so either was OK. In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is assigned for the serial NOR interface. For the consistency, use the latter for all the SoCs. Also, fix the range properties to reflect the real address mapping, where the support card is located at the offset address 0x01f00000 of CS1 of the external bus. Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 5 ++--- arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts | 5 ++--- arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 5 ++--- arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 5 ++--- arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 5 ++--- 5 files changed, 10 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index bfd3bb8c8285..e9722a5ea781 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -74,12 +74,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 33963acd7e8f..1757c4b2c3db 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -76,12 +76,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 69a5b7d39629..47e2edb03401 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -76,12 +76,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index 1a440f87fa92..adcbbc6b95d8 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -75,12 +75,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index 955d417a5c42..bcf2e7cc390f 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -74,12 +74,11 @@ }; &extbus { - ranges = <0 0x00000000 0x0f000000 0x01000000 - 1 0x00000000 0x00000000 0x08000000>; + ranges = <1 0x00000000 0x42000000 0x02000000>; }; &support_card { - ranges = <0x00000000 1 0x03f00000 0x00100000>; + ranges = <0x00000000 1 0x01f00000 0x00100000>; }; ðsc { -- cgit v1.2.3-70-g09d2 From 5078f77e14431efbfacd541c563b101bd6a99d75 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 15 Oct 2015 12:20:15 +0200 Subject: ARM64: juno: add NOR flash to device tree The Juno motherboard has a NOR flash on the motherboard, enable this to be accessed with the CFI flash driver. Results after enabling MTD, MTD_CFI, MTD_PHYSMAP, MTD_PHYSMAP_OF, MTD_CFI_INTELEXT: 8000000.flash: Found 2 x16 devices at 0x0 in 32-bit bank. Manufacturer ID 0x000089 Chip ID 0x008919 Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Intel/Sharp Extended Query Table at 0x010A Using buffer write method Using auto-unlock on power-up/resume cfi_cmdset_0001: Erase suspend on write enabled erase region 0: offset=0x0,size=0x40000,blocks=255 erase region 1: offset=0x3fc0000,size=0x10000,blocks=4 Cc: Catalin Marinas Signed-off-by: Linus Walleij Acked-by: Liviu Dudau Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index 637e046f0e36..c7c99a42e2e9 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -103,6 +103,14 @@ }; }; + flash@0,00000000 { + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ + compatible = "arm,vexpress-flash", "cfi-flash"; + linux,part-probe = "afs"; + reg = <0 0x00000000 0x04000000>; + bank-width = <4>; + }; + ethernet@2,00000000 { compatible = "smsc,lan9118", "smsc,lan9115"; reg = <2 0x00000000 0x10000>; -- cgit v1.2.3-70-g09d2 From 2d5958e360aefc904c1c49850c92397dc865c7f2 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 13 Oct 2015 14:28:03 +0300 Subject: ARM: digicolor: add pinctrl module device node Signed-off-by: Baruch Siach Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/cx92755.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/cx92755.dtsi b/arch/arm/boot/dts/cx92755.dtsi index df4c6f1f93f9..a5a23c376418 100644 --- a/arch/arm/boot/dts/cx92755.dtsi +++ b/arch/arm/boot/dts/cx92755.dtsi @@ -95,6 +95,13 @@ timeout-sec = <15>; }; + pinctrl: pinctrl@f0000e20 { + compatible = "cnxt,cx92755-pinctrl"; + reg = <0xf0000e20 0x100>; + gpio-controller; + #gpio-cells = <2>; + }; + uc_regs: syscon@f00003a0 { compatible = "cnxt,cx92755-uc", "syscon"; reg = <0xf00003a0 0x10>; -- cgit v1.2.3-70-g09d2 From 020effe8cb0b2643bdcbfebc547f6e52f924f908 Mon Sep 17 00:00:00 2001 From: Baruch Siach Date: Tue, 13 Oct 2015 14:28:04 +0300 Subject: ARM: digicolor: dts: add uart pin configuration Signed-off-by: Baruch Siach Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/cx92755_equinox.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/cx92755_equinox.dts b/arch/arm/boot/dts/cx92755_equinox.dts index 5da00806c41e..026f556c8c50 100644 --- a/arch/arm/boot/dts/cx92755_equinox.dts +++ b/arch/arm/boot/dts/cx92755_equinox.dts @@ -70,8 +70,17 @@ &uart0 { status = "okay"; + pinctrl-0 = <&uart0_default>; + pinctrl-names = "default"; }; &i2c { status = "okay"; }; + +&pinctrl { + uart0_default: uart0_active { + pins = "GP_O0", "GP_O1"; + function = "client_b"; + }; +}; -- cgit v1.2.3-70-g09d2 From ebb251030bf25b27b05f0e4204e27b85c5664364 Mon Sep 17 00:00:00 2001 From: Alan Tull Date: Tue, 13 Oct 2015 19:38:59 +0000 Subject: ARM: socfpga: dts: add fpga manager Add FPGA manager to device tree for SoCFPGA. Signed-off-by: Alan Tull Reviewed-by: Moritz Fischer Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 314e589cfa00..0f50ae8e7e63 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -513,6 +513,13 @@ }; }; + fpgamgr0: fpgamgr@ff706000 { + compatible = "altr,socfpga-fpga-mgr"; + reg = <0xff706000 0x1000 + 0xffb90000 0x1000>; + interrupts = <0 175 4>; + }; + gmac0: ethernet@ff700000 { compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; altr,sysmgr-syscon = <&sysmgr 0x60 0>; -- cgit v1.2.3-70-g09d2 From 6c067963f6e128bdca1e4db947f1a0e8ad2bd846 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 15 Oct 2015 00:32:21 +0800 Subject: ARM: dts: sun8i: Add NMI interrupt controller node The NMI interrupt controller is in charge of the NMI pin exposed by the SoC to the PMIC. The PMIC signals interrupts through this. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index 828aaf52c342..a1e3acd325f4 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -579,6 +579,14 @@ ; }; + nmi_intc: interrupt-controller@01f00c0c { + compatible = "allwinner,sun6i-a31-sc-nmi"; + interrupt-controller; + #interrupt-cells = <2>; + reg = <0x01f00c0c 0x38>; + interrupts = ; + }; + prcm@01f01400 { compatible = "allwinner,sun8i-a23-prcm"; reg = <0x01f01400 0x200>; -- cgit v1.2.3-70-g09d2 From 0cdbec626e2e936a7db43d6a697e70673d4478bf Mon Sep 17 00:00:00 2001 From: Steffen Trumtrar Date: Tue, 13 Oct 2015 20:11:42 +0000 Subject: ARM: socfpga: dts: sort nodes alphabetically The sorting policy for this file is alphabetically. Reorder all nodes, that are out of place. Signed-off-by: Steffen Trumtrar Signed-off-by: Dinh Nguyen --- arch/arm/boot/dts/socfpga.dtsi | 128 ++++++++++++++++++++--------------------- 1 file changed, 64 insertions(+), 64 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 314e589cfa00..d7f61eecc43a 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -549,46 +549,6 @@ status = "disabled"; }; - i2c0: i2c@ffc04000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc04000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 158 0x4>; - status = "disabled"; - }; - - i2c1: i2c@ffc05000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc05000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 159 0x4>; - status = "disabled"; - }; - - i2c2: i2c@ffc06000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc06000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 160 0x4>; - status = "disabled"; - }; - - i2c3: i2c@ffc07000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "snps,designware-i2c"; - reg = <0xffc07000 0x1000>; - clocks = <&l4_sp_clk>; - interrupts = <0 161 0x4>; - status = "disabled"; - }; - gpio0: gpio@ff708000 { #address-cells = <1>; #size-cells = <0>; @@ -649,15 +609,44 @@ }; }; - sdr: sdr@ffc25000 { - compatible = "syscon"; - reg = <0xffc25000 0x1000>; + i2c0: i2c@ffc04000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc04000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 158 0x4>; + status = "disabled"; }; - sdramedac { - compatible = "altr,sdram-edac"; - altr,sdr-syscon = <&sdr>; - interrupts = <0 39 4>; + i2c1: i2c@ffc05000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc05000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 159 0x4>; + status = "disabled"; + }; + + i2c2: i2c@ffc06000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc06000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 160 0x4>; + status = "disabled"; + }; + + i2c3: i2c@ffc07000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xffc07000 0x1000>; + clocks = <&l4_sp_clk>; + interrupts = <0 161 0x4>; + status = "disabled"; }; L2: l2-cache@fffef000 { @@ -688,6 +677,29 @@ reg = <0xffff0000 0x10000>; }; + rst: rstmgr@ffd05000 { + #reset-cells = <1>; + compatible = "altr,rst-mgr"; + reg = <0xffd05000 0x1000>; + altr,modrst-offset = <0x10>; + }; + + scu: snoop-control-unit@fffec000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xfffec000 0x100>; + }; + + sdr: sdr@ffc25000 { + compatible = "syscon"; + reg = <0xffc25000 0x1000>; + }; + + sdramedac { + compatible = "altr,sdram-edac"; + altr,sdr-syscon = <&sdr>; + interrupts = <0 39 4>; + }; + spi0: spi@fff00000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -699,11 +711,6 @@ status = "disabled"; }; - scu: snoop-control-unit@fffec000 { - compatible = "arm,cortex-a9-scu"; - reg = <0xfffec000 0x100>; - }; - spi1: spi@fff01000 { compatible = "snps,dw-apb-ssi"; #address-cells = <1>; @@ -715,6 +722,11 @@ status = "disabled"; }; + sysmgr: sysmgr@ffd08000 { + compatible = "altr,sys-mgr", "syscon"; + reg = <0xffd08000 0x4000>; + }; + /* Local timer */ timer@fffec600 { compatible = "arm,cortex-a9-twd-timer"; @@ -779,13 +791,6 @@ dma-names = "tx", "rx"; }; - rst: rstmgr@ffd05000 { - #reset-cells = <1>; - compatible = "altr,rst-mgr"; - reg = <0xffd05000 0x1000>; - altr,modrst-offset = <0x10>; - }; - usbphy0: usbphy@0 { #phy-cells = <0>; compatible = "usb-nop-xceiv"; @@ -829,10 +834,5 @@ clocks = <&osc1>; status = "disabled"; }; - - sysmgr: sysmgr@ffd08000 { - compatible = "altr,sys-mgr", "syscon"; - reg = <0xffd08000 0x4000>; - }; }; }; -- cgit v1.2.3-70-g09d2 From 6b61f2497852b7d27e1c024d966c09defbf99948 Mon Sep 17 00:00:00 2001 From: Marcin Wojtas Date: Thu, 15 Oct 2015 18:25:44 +0200 Subject: ARM: mvebu: set SW polling as SDHCI card detection on A388-GP The newest revisions of A388-GP (v1.5 and higher) support only DAT3-based card detection. Revisions < v1.5 based on GPIO detection via I2C expander, but this solution is supposed to be deprecated on new boards. In order to satisfy all type of hardware this commit changes card detection to use software polling mechanism. Also a comment is added on possible card detection options in A388-GP DT board file. Signed-off-by: Marcin Wojtas Acked-by: Andrew Lunn Signed-off-by: Gregory CLEMENT --- arch/arm/boot/dts/armada-388-gp.dts | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index 4baac9329f3d..a633be3defda 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -207,8 +207,21 @@ sdhci@d8000 { pinctrl-names = "default"; pinctrl-0 = <&sdhci_pins>; - cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>; no-1-8-v; + /* + * A388-GP board v1.5 and higher replace + * hitherto card detection method based on GPIO + * with the one using DAT3 pin. As they are + * incompatible, software-based polling is + * enabled with 'broken-cd' property. For boards + * older than v1.5 it can be replaced with: + * 'cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;', + * whereas for the newer ones following can be + * used instead: + * 'dat3-cd;' + * 'cd-inverted;' + */ + broken-cd; wp-inverted; bus-width = <8>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 0efc898a9bea7a2e8e583c6efab0e19dc7093078 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Oct 2015 12:32:32 -0700 Subject: ARM: dts: Fix WLAN regression on omap5-uevm Commit 99f84cae43df ("ARM: dts: add wl12xx/wl18xx bindings") added device tree bindings for the TI WLAN SDIO on many omap variants. I recall wondering how come omap5-uevm did not have the WLAN added and this issue has been bugging me for a while now, and I finally tracked it down to a bad pinmux regression, and a missing deferred probe handling for the 32k clock from palmas that's requested by twl6040. Basically 392adaf796b9 ("ARM: dts: omap5-evm: Add mcspi data") added pin muxing for mcspi4 that conflicts with the onboard WLAN. While some omap5-uevm don't have WLAN populated, the pins are not reused for other devices. And as the SDIO bus should be probed, let's try to enable WLAN by default. Let's fix the regression and add the WLAN configuration as done for the other boards in 99f84cae43df ("ARM: dts: add wl12xx/wl18xx bindings"). And let's use the new MMC pwrseq for the 32k clock as suggested by Javier Martinez Canillas . Note that without a related deferred probe fix for twl6040, the 32k clock is not initialized if palmas-clk is a module and twl6040 is built-in. Let's also use the generic "non-removable" instead of the legacy "ti,non-removable" property while at it. And finally, note that omap5 seems to require WAKEUP_EN for the WLAN GPIO interrupt. Fixes: 392adaf796b9 ("ARM: dts: omap5-evm: Add mcspi data") Cc: Sourav Poddar Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-uevm.dts | 66 +++++++++++++++++++++++++++++++++------- 1 file changed, 55 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 4da9e52f147b..f10b42fa15c6 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -31,6 +31,24 @@ regulator-max-microvolt = <3000000>; }; + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + /* HS USB Host PHY on PORT 2 */ hsusb2_phy: hsusb2_phy { compatible = "usb-nop-xceiv"; @@ -197,12 +215,20 @@ >; }; - mcspi4_pins: pinmux_mcspi4_pins { + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { pinctrl-single,pins = < - 0x164 (PIN_INPUT | MUX_MODE1) /* mcspi4_clk */ - 0x168 (PIN_INPUT | MUX_MODE1) /* mcspi4_simo */ - 0x16a (PIN_INPUT | MUX_MODE1) /* mcspi4_somi */ - 0x16c (PIN_INPUT | MUX_MODE1) /* mcspi4_cs0 */ + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ >; }; @@ -276,6 +302,12 @@ 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ >; }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; }; &mmc1 { @@ -290,8 +322,25 @@ }; &mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; bus-width = <4>; - ti,non-removable; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; + interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x168>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; }; &mmc4 { @@ -598,11 +647,6 @@ pinctrl-0 = <&mcspi3_pins>; }; -&mcspi4 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi4_pins>; -}; - &uart1 { pinctrl-names = "default"; pinctrl-0 = <&uart1_pins>; -- cgit v1.2.3-70-g09d2 From ee9a97dbeeddc8d4d3b3c69400faa2e594f45b4a Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Oct 2015 12:32:32 -0700 Subject: ARM: dts: Move most of omap5-uevm.dts to omap5-board-common.dtsi Looks like thevarious omap5-uevm models and igepv5 are very similar. So let's create omap5-board-common.dtsi to allow fixing up things properly for mainline kernel to support all these. Even if we eventually end up having only PMIC + MMC + eMMC + SDIO WLAN + SATA + USB + HDMI configuration in the omap5-board-common.dtsi, this is the easiest way to add support for other boards rather than diffing various versions of out of tree dts files. My guess is that also omap5-sbc-t54.dts can use this, but I don't have that board so that will need to be dealt with later on. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap5-board-common.dtsi | 655 +++++++++++++++++++++++++++++ arch/arm/boot/dts/omap5-uevm.dts | 662 +----------------------------- 2 files changed, 669 insertions(+), 648 deletions(-) create mode 100644 arch/arm/boot/dts/omap5-board-common.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/omap5-board-common.dtsi b/arch/arm/boot/dts/omap5-board-common.dtsi new file mode 100644 index 000000000000..5cf76a1c5c75 --- /dev/null +++ b/arch/arm/boot/dts/omap5-board-common.dtsi @@ -0,0 +1,655 @@ +/* + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include "omap5.dtsi" +#include +#include + +/ { + aliases { + display0 = &hdmi0; + }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + mmc3_pwrseq: sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&clk32kgaudio>; + clock-names = "ext_clock"; + }; + + vmmcsdio_fixed: fixedregulator-mmcsdio { + compatible = "regulator-fixed"; + regulator-name = "vmmcsdio_fixed"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ + enable-active-high; + startup-delay-us = <70000>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_pins>; + }; + + /* HS USB Host PHY on PORT 2 */ + hsusb2_phy: hsusb2_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ + clocks = <&auxclk1_ck>; + clock-names = "main_clk"; + clock-frequency = <19200000>; + }; + + /* HS USB Host PHY on PORT 3 */ + hsusb3_phy: hsusb3_phy { + compatible = "usb-nop-xceiv"; + reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ + }; + + leds { + compatible = "gpio-leds"; + led@1 { + label = "omap5:blue:usr1"; + gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + tpd12s015: encoder@0 { + compatible = "ti,tpd12s015"; + + pinctrl-names = "default"; + pinctrl-0 = <&tpd12s015_pins>; + + /* gpios defined in the board specific dts */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tpd12s015_in: endpoint@0 { + remote-endpoint = <&hdmi_out>; + }; + }; + + port@1 { + reg = <1>; + + tpd12s015_out: endpoint@0 { + remote-endpoint = <&hdmi_connector_in>; + }; + }; + }; + }; + + hdmi0: connector@0 { + compatible = "hdmi-connector"; + label = "hdmi"; + + type = "b"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&tpd12s015_out>; + }; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_pins + &led_gpio_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ + 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ + 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ + 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ + 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ + 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ + 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ + 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ + 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ + 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ + 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ + 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ + >; + }; + + mcspi2_pins: pinmux_mcspi2_pins { + pinctrl-single,pins = < + 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ + 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ + 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ + 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ + >; + }; + + mcspi3_pins: pinmux_mcspi3_pins { + pinctrl-single,pins = < + 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ + 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ + 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ + 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ + >; + }; + + mmc3_pins: pinmux_mmc3_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ + OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ + OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ + OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ + OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ + OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ + >; + }; + + wlan_pins: pinmux_wlan_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ + >; + }; + + usbhost_pins: pinmux_usbhost_pins { + pinctrl-single,pins = < + 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ + 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ + + 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ + 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ + + 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ + 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ + >; + }; + + led_gpio_pins: pinmux_led_gpio_pins { + pinctrl-single,pins = < + 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ + >; + }; + + uart1_pins: pinmux_uart1_pins { + pinctrl-single,pins = < + 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ + 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ + 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ + 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ + >; + }; + + uart5_pins: pinmux_uart5_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ + 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ + 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ + 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ + 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ + 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ + >; + }; +}; + +&omap5_pmx_wkup { + pinctrl-names = "default"; + pinctrl-0 = < + &usbhost_wkup_pins + >; + + usbhost_wkup_pins: pinmux_usbhost_wkup_pins { + pinctrl-single,pins = < + 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ + >; + }; + + wlcore_irq_pin: pinmux_wlcore_irq_pin { + pinctrl-single,pins = < + OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ + >; + }; +}; + +&mmc1 { + vmmc-supply = <&ldo9_reg>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + vmmc-supply = <&vmmcsdio_fixed>; + mmc-pwrseq = <&mmc3_pwrseq>; + bus-width = <4>; + non-removable; + cap-power-off-card; + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; + interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH + &omap5_pmx_core 0x168>; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ + ref-clock-frequency = <26000000>; + }; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + clock-frequency = <400000>; + + palmas: palmas@48 { + compatible = "ti,palmas"; + interrupts = ; /* IRQ_SYS_1N */ + reg = <0x48>; + interrupt-controller; + #interrupt-cells = <2>; + ti,system-power-controller; + + extcon_usb3: palmas_usb { + compatible = "ti,palmas-usb-vid"; + ti,enable-vbus-detection; + ti,enable-id-detection; + ti,wakeup; + }; + + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + + palmas_pmic { + compatible = "ti,palmas-pmic"; + interrupt-parent = <&palmas>; + interrupts = <14 IRQ_TYPE_NONE>; + interrupt-name = "short-irq"; + + ti,ldo6-vibrator; + + regulators { + smps123_reg: smps123 { + /* VDD_OPP_MPU */ + regulator-name = "smps123"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + + smps45_reg: smps45 { + /* VDD_OPP_MM */ + regulator-name = "smps45"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps6_reg: smps6 { + /* VDD_DDR3 - over VDD_SMPS6 */ + regulator-name = "smps6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + smps7_reg: smps7 { + /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ + regulator-name = "smps7"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + smps8_reg: smps8 { + /* VDD_OPP_CORE */ + regulator-name = "smps8"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1310000>; + regulator-always-on; + regulator-boot-on; + }; + + smps9_reg: smps9 { + /* VDDA_2v1_AUD over VDD_2v1 */ + regulator-name = "smps9"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2100000>; + ti,smps-range = <0x80>; + }; + + smps10_out2_reg: smps10_out2 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + smps10_out1_reg: smps10_out1 { + /* VBUS_5V_OTG */ + regulator-name = "smps10_out1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + ldo1_reg: ldo1 { + /* VDDAPHY_CAM: vdda_csiport */ + regulator-name = "ldo1"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2_reg: ldo2 { + /* VCC_2V8_DISP: Does not go anywhere */ + regulator-name = "ldo2"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + /* Unused */ + status = "disabled"; + }; + + ldo3_reg: ldo3 { + /* VDDAPHY_MDM: vdda_lli */ + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + /* Only if Modem is used */ + status = "disabled"; + }; + + ldo4_reg: ldo4 { + /* VDDAPHY_DISP: vdda_dsiport/hdmi */ + regulator-name = "ldo4"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5_reg: ldo5 { + /* VDDA_1V8_PHY: usb/sata/hdmi.. */ + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: ldo6 { + /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ + regulator-name = "ldo6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo7_reg: ldo7 { + /* VDD_VPP: vpp1 */ + regulator-name = "ldo7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + /* Only for efuse reprograming! */ + status = "disabled"; + }; + + ldo8_reg: ldo8 { + /* VDD_3v0: Does not go anywhere */ + regulator-name = "ldo8"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + /* Unused */ + status = "disabled"; + }; + + ldo9_reg: ldo9 { + /* VCC_DV_SDIO: vdds_sdcard */ + regulator-name = "ldo9"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldoln_reg: ldoln { + /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ + regulator-name = "ldoln"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldousb_reg: ldousb { + /* VDDA_3V_USB: VDDA_USBHS33 */ + regulator-name = "ldousb"; + regulator-min-microvolt = <3250000>; + regulator-max-microvolt = <3250000>; + regulator-always-on; + regulator-boot-on; + }; + + regen3_reg: regen3 { + /* REGEN3 controls LDO9 supply to card */ + regulator-name = "regen3"; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + + palmas_power_button: palmas_power_button { + compatible = "ti,palmas-pwrbutton"; + interrupt-parent = <&palmas>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + wakeup-source; + }; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + interrupts = ; /* IRQ_SYS_2N cascaded to gic */ + ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>; + clock-names = "clk32k"; + }; +}; + +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; +}; + +&usbhshost { + port2-mode = "ehci-hsic"; + port3-mode = "ehci-hsic"; +}; + +&usbhsehci { + phys = <0 &hsusb2_phy &hsusb3_phy>; +}; + +&usb3 { + extcon = <&extcon_usb3>; + vbus-supply = <&smps10_out1_reg>; +}; + +&mcspi1 { + +}; + +&mcspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi2_pins>; +}; + +&mcspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&mcspi3_pins>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, + <&omap5_pmx_core 0x19c>; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&uart5_pins>; +}; + +&cpu0 { + cpu0-supply = <&smps123_reg>; +}; + +&dss { + status = "ok"; +}; + +&hdmi { + status = "ok"; + + /* vdda-supply populated in board specific dts file */ + + pinctrl-names = "default"; + pinctrl-0 = <&dss_hdmi_pins>; + + port { + hdmi_out: endpoint { + remote-endpoint = <&tpd12s015_in>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index f10b42fa15c6..05b1c1ebded8 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -7,9 +7,7 @@ */ /dts-v1/; -#include "omap5.dtsi" -#include -#include +#include "omap5-board-common.dtsi" / { model = "TI OMAP5 uEVM board"; @@ -19,572 +17,10 @@ device_type = "memory"; reg = <0x80000000 0x7F000000>; /* 2032 MB */ }; - - aliases { - display0 = &hdmi0; - }; - - vmmcsd_fixed: fixedregulator-mmcsd { - compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - mmc3_pwrseq: sdhci0_pwrseq { - compatible = "mmc-pwrseq-simple"; - clocks = <&clk32kgaudio>; - clock-names = "ext_clock"; - }; - - vmmcsdio_fixed: fixedregulator-mmcsdio { - compatible = "regulator-fixed"; - regulator-name = "vmmcsdio_fixed"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - gpio = <&gpio5 12 GPIO_ACTIVE_HIGH>; /* gpio140 WLAN_EN */ - enable-active-high; - startup-delay-us = <70000>; - pinctrl-names = "default"; - pinctrl-0 = <&wlan_pins>; - }; - - /* HS USB Host PHY on PORT 2 */ - hsusb2_phy: hsusb2_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 16 GPIO_ACTIVE_LOW>; /* gpio3_80 HUB_NRESET */ - clocks = <&auxclk1_ck>; - clock-names = "main_clk"; - clock-frequency = <19200000>; - }; - - /* HS USB Host PHY on PORT 3 */ - hsusb3_phy: hsusb3_phy { - compatible = "usb-nop-xceiv"; - reset-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>; /* gpio3_79 ETH_NRESET */ - }; - - leds { - compatible = "gpio-leds"; - led@1 { - label = "omap5:blue:usr1"; - gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>; /* gpio5_153 D1 LED */ - linux,default-trigger = "heartbeat"; - default-state = "off"; - }; - }; - - tpd12s015: encoder@0 { - compatible = "ti,tpd12s015"; - - pinctrl-names = "default"; - pinctrl-0 = <&tpd12s015_pins>; - - gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ - <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ - <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - tpd12s015_in: endpoint@0 { - remote-endpoint = <&hdmi_out>; - }; - }; - - port@1 { - reg = <1>; - - tpd12s015_out: endpoint@0 { - remote-endpoint = <&hdmi_connector_in>; - }; - }; - }; - }; - - hdmi0: connector@0 { - compatible = "hdmi-connector"; - label = "hdmi"; - - type = "b"; - - port { - hdmi_connector_in: endpoint { - remote-endpoint = <&tpd12s015_out>; - }; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "omap5-uevm"; - - ti,mclk-freq = <19200000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap5_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_pins - &led_gpio_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0x17e (PIN_OUTPUT | MUX_MODE6) /* mcspi1_somi.gpio5_141 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0x142 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_clks.abe_clks */ - 0x15c (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_ul_data.abemcpdm_ul_data */ - 0x15e (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_dl_data.abemcpdm_dl_data */ - 0x160 (PIN_INPUT_PULLUP | MUX_MODE0) /* abemcpdm_frame.abemcpdm_frame */ - 0x162 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcpdm_lb_clk.abemcpdm_lb_clk */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0x14c (PIN_INPUT | MUX_MODE1) /* abedmic_clk2.abemcbsp1_fsx */ - 0x14e (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* abedmic_clk3.abemcbsp1_dx */ - 0x150 (PIN_INPUT | MUX_MODE1) /* abeslimbus1_clock.abemcbsp1_clkx */ - 0x152 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* abeslimbus1_data.abemcbsp1_dr */ - >; - }; - - mcbsp2_pins: pinmux_mcbsp2_pins { - pinctrl-single,pins = < - 0x154 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dr.abemcbsp2_dr */ - 0x156 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abemcbsp2_dx.abemcbsp2_dx */ - 0x158 (PIN_INPUT | MUX_MODE0) /* abemcbsp2_fsx.abemcbsp2_fsx */ - 0x15a (PIN_INPUT | MUX_MODE0) /* abemcbsp2_clkx.abemcbsp2_clkx */ - >; - }; - - i2c1_pins: pinmux_i2c1_pins { - pinctrl-single,pins = < - 0x1b2 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */ - 0x1b4 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */ - >; - }; - - i2c5_pins: pinmux_i2c5_pins { - pinctrl-single,pins = < - 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ - 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ - >; - }; - - mcspi2_pins: pinmux_mcspi2_pins { - pinctrl-single,pins = < - 0xbc (PIN_INPUT | MUX_MODE0) /* mcspi2_clk */ - 0xbe (PIN_INPUT | MUX_MODE0) /* mcspi2_simo */ - 0xc0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcspi2_somi */ - 0xc2 (PIN_OUTPUT | MUX_MODE0) /* mcspi2_cs0 */ - >; - }; - - mcspi3_pins: pinmux_mcspi3_pins { - pinctrl-single,pins = < - 0x78 (PIN_INPUT | MUX_MODE1) /* mcspi3_somi */ - 0x7a (PIN_INPUT | MUX_MODE1) /* mcspi3_cs0 */ - 0x7c (PIN_INPUT | MUX_MODE1) /* mcspi3_simo */ - 0x7e (PIN_INPUT | MUX_MODE1) /* mcspi3_clk */ - >; - }; - - mmc3_pins: pinmux_mmc3_pins { - pinctrl-single,pins = < - OMAP5_IOPAD(0x01a4, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_clk */ - OMAP5_IOPAD(0x01a6, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_cmd */ - OMAP5_IOPAD(0x01a8, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data0 */ - OMAP5_IOPAD(0x01aa, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data1 */ - OMAP5_IOPAD(0x01ac, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data2 */ - OMAP5_IOPAD(0x01ae, PIN_INPUT_PULLUP | MUX_MODE0) /* wlsdio_data3 */ - >; - }; - - wlan_pins: pinmux_wlan_pins { - pinctrl-single,pins = < - OMAP5_IOPAD(0x1bc, PIN_OUTPUT | MUX_MODE6) /* mcspi1_clk.gpio5_140 */ - >; - }; - - usbhost_pins: pinmux_usbhost_pins { - pinctrl-single,pins = < - 0x84 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_strobe */ - 0x86 (PIN_INPUT | MUX_MODE0) /* usbb2_hsic_data */ - - 0x19e (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_strobe */ - 0x1a0 (PIN_INPUT | MUX_MODE0) /* usbb3_hsic_data */ - - 0x70 (PIN_OUTPUT | MUX_MODE6) /* gpio3_80 HUB_NRESET */ - 0x6e (PIN_OUTPUT | MUX_MODE6) /* gpio3_79 ETH_NRESET */ - >; - }; - - led_gpio_pins: pinmux_led_gpio_pins { - pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE6) /* uart3_cts_rctx.gpio5_153 */ - >; - }; - - uart1_pins: pinmux_uart1_pins { - pinctrl-single,pins = < - 0x60 (PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x62 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_tx.uart1_cts */ - 0x64 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rx.uart1_rts */ - 0x66 (PIN_OUTPUT | MUX_MODE0) /* uart1_rx.uart1_rts */ - >; - }; - - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - 0x19a (PIN_OUTPUT | MUX_MODE0) /* uart3_rts_irsd.uart3_tx_irtx */ - 0x19c (PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_rx_irrx.uart3_usbb3_hsic */ - >; - }; - - uart5_pins: pinmux_uart5_pins { - pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_rx.uart5_rx */ - 0x172 (PIN_OUTPUT | MUX_MODE0) /* uart5_tx.uart5_tx */ - 0x174 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart5_cts.uart5_rts */ - 0x176 (PIN_OUTPUT | MUX_MODE0) /* uart5_cts.uart5_rts */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x0fc (PIN_INPUT_PULLUP | MUX_MODE0) /* hdmi_cec.hdmi_cec */ - 0x100 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_scl.hdmi_ddc_scl */ - 0x102 (PIN_INPUT | MUX_MODE0) /* hdmi_ddc_sda.hdmi_ddc_sda */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x0fe (PIN_INPUT_PULLDOWN | MUX_MODE6) /* hdmi_hpd.gpio7_193 */ - >; - }; }; -&omap5_pmx_wkup { - pinctrl-names = "default"; - pinctrl-0 = < - &usbhost_wkup_pins - >; - - usbhost_wkup_pins: pinmux_usbhost_wkup_pins { - pinctrl-single,pins = < - 0x1A (PIN_OUTPUT | MUX_MODE0) /* fref_clk1_out, USB hub clk */ - >; - }; - - wlcore_irq_pin: pinmux_wlcore_irq_pin { - pinctrl-single,pins = < - OMAP5_IOPAD(0x040, WAKEUP_EN | PIN_INPUT_PULLUP | MUX_MODE6) /* llia_wakereqin.gpio1_wk14 */ - >; - }; -}; - -&mmc1 { - vmmc-supply = <&ldo9_reg>; - bus-width = <4>; -}; - -&mmc2 { - vmmc-supply = <&vmmcsd_fixed>; - bus-width = <8>; - ti,non-removable; -}; - -&mmc3 { - vmmc-supply = <&vmmcsdio_fixed>; - mmc-pwrseq = <&mmc3_pwrseq>; - bus-width = <4>; - non-removable; - cap-power-off-card; - pinctrl-names = "default"; - pinctrl-0 = <&mmc3_pins &wlcore_irq_pin>; - interrupts-extended = <&gic GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH - &omap5_pmx_core 0x168>; - - #address-cells = <1>; - #size-cells = <0>; - wlcore: wlcore@2 { - compatible = "ti,wl1271"; - reg = <2>; - interrupt-parent = <&gpio1>; - interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; /* gpio 14 */ - ref-clock-frequency = <26000000>; - }; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - status = "disabled"; -}; - -&i2c1 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - - clock-frequency = <400000>; - - palmas: palmas@48 { - compatible = "ti,palmas"; - interrupts = ; /* IRQ_SYS_1N */ - reg = <0x48>; - interrupt-controller; - #interrupt-cells = <2>; - ti,system-power-controller; - - extcon_usb3: palmas_usb { - compatible = "ti,palmas-usb-vid"; - ti,enable-vbus-detection; - ti,enable-id-detection; - ti,wakeup; - }; - - clk32kgaudio: palmas_clk32k@1 { - compatible = "ti,palmas-clk32kgaudio"; - #clock-cells = <0>; - }; - - palmas_pmic { - compatible = "ti,palmas-pmic"; - interrupt-parent = <&palmas>; - interrupts = <14 IRQ_TYPE_NONE>; - interrupt-name = "short-irq"; - - ti,ldo6-vibrator; - - regulators { - smps123_reg: smps123 { - /* VDD_OPP_MPU */ - regulator-name = "smps123"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - }; - - smps45_reg: smps45 { - /* VDD_OPP_MM */ - regulator-name = "smps45"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps6_reg: smps6 { - /* VDD_DDR3 - over VDD_SMPS6 */ - regulator-name = "smps6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - smps7_reg: smps7 { - /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */ - regulator-name = "smps7"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - smps8_reg: smps8 { - /* VDD_OPP_CORE */ - regulator-name = "smps8"; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1310000>; - regulator-always-on; - regulator-boot-on; - }; - - smps9_reg: smps9 { - /* VDDA_2v1_AUD over VDD_2v1 */ - regulator-name = "smps9"; - regulator-min-microvolt = <2100000>; - regulator-max-microvolt = <2100000>; - ti,smps-range = <0x80>; - }; - - smps10_out2_reg: smps10_out2 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out2"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - regulator-boot-on; - }; - - smps10_out1_reg: smps10_out1 { - /* VBUS_5V_OTG */ - regulator-name = "smps10_out1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - }; - - ldo1_reg: ldo1 { - /* VDDAPHY_CAM: vdda_csiport */ - regulator-name = "ldo1"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo2_reg: ldo2 { - /* VCC_2V8_DISP: Does not go anywhere */ - regulator-name = "ldo2"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - /* Unused */ - status = "disabled"; - }; - - ldo3_reg: ldo3 { - /* VDDAPHY_MDM: vdda_lli */ - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - /* Only if Modem is used */ - status = "disabled"; - }; - - ldo4_reg: ldo4 { - /* VDDAPHY_DISP: vdda_dsiport/hdmi */ - regulator-name = "ldo4"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - }; - - ldo5_reg: ldo5 { - /* VDDA_1V8_PHY: usb/sata/hdmi.. */ - regulator-name = "ldo5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: ldo6 { - /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */ - regulator-name = "ldo6"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo7_reg: ldo7 { - /* VDD_VPP: vpp1 */ - regulator-name = "ldo7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - /* Only for efuse reprograming! */ - status = "disabled"; - }; - - ldo8_reg: ldo8 { - /* VDD_3v0: Does not go anywhere */ - regulator-name = "ldo8"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - /* Unused */ - status = "disabled"; - }; - - ldo9_reg: ldo9 { - /* VCC_DV_SDIO: vdds_sdcard */ - regulator-name = "ldo9"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldoln_reg: ldoln { - /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */ - regulator-name = "ldoln"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldousb_reg: ldousb { - /* VDDA_3V_USB: VDDA_USBHS33 */ - regulator-name = "ldousb"; - regulator-min-microvolt = <3250000>; - regulator-max-microvolt = <3250000>; - regulator-always-on; - regulator-boot-on; - }; - - regen3_reg: regen3 { - /* REGEN3 controls LDO9 supply to card */ - regulator-name = "regen3"; - regulator-always-on; - regulator-boot-on; - }; - }; - }; - - palmas_power_button: palmas_power_button { - compatible = "ti,palmas-pwrbutton"; - interrupt-parent = <&palmas>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - wakeup-source; - }; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - - pinctrl-names = "default"; - pinctrl-0 = <&twl6040_pins>; - - interrupts = ; /* IRQ_SYS_2N cascaded to gic */ - ti,audpwron-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>; /* gpio line 141 */ - - vio-supply = <&smps7_reg>; - v2v1-supply = <&smps9_reg>; - enable-active-high; - - clocks = <&clk32kgaudio>; - clock-names = "clk32k"; - }; +&hdmi { + vdda-supply = <&ldo4_reg>; }; &i2c5 { @@ -601,87 +37,17 @@ }; }; -&mcpdm { - pinctrl-names = "default"; - pinctrl-0 = <&mcpdm_pins>; - status = "okay"; -}; - -&mcbsp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp1_pins>; - status = "okay"; -}; - -&mcbsp2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcbsp2_pins>; - status = "okay"; -}; - -&usbhshost { - port2-mode = "ehci-hsic"; - port3-mode = "ehci-hsic"; -}; - -&usbhsehci { - phys = <0 &hsusb2_phy &hsusb3_phy>; -}; - -&usb3 { - extcon = <&extcon_usb3>; - vbus-supply = <&smps10_out1_reg>; -}; - -&mcspi1 { - -}; - -&mcspi2 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi2_pins>; -}; - -&mcspi3 { - pinctrl-names = "default"; - pinctrl-0 = <&mcspi3_pins>; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; - interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, - <&omap5_pmx_core 0x19c>; -}; - -&uart5 { - pinctrl-names = "default"; - pinctrl-0 = <&uart5_pins>; -}; - -&cpu0 { - cpu0-supply = <&smps123_reg>; -}; - -&dss { - status = "ok"; +&omap5_pmx_core { + i2c5_pins: pinmux_i2c5_pins { + pinctrl-single,pins = < + 0x186 (PIN_INPUT | MUX_MODE0) /* i2c5_scl */ + 0x188 (PIN_INPUT | MUX_MODE0) /* i2c5_sda */ + >; + }; }; -&hdmi { - status = "ok"; - vdda-supply = <&ldo4_reg>; - - pinctrl-names = "default"; - pinctrl-0 = <&dss_hdmi_pins>; - - port { - hdmi_out: endpoint { - remote-endpoint = <&tpd12s015_in>; - }; - }; +&tpd12s015 { + gpios = <&gpio9 0 GPIO_ACTIVE_HIGH>, /* TCA6424A P01, CT CP HPD */ + <&gpio9 1 GPIO_ACTIVE_HIGH>, /* TCA6424A P00, LS OE */ + <&gpio7 1 GPIO_ACTIVE_HIGH>; /* GPIO 193, HPD */ }; -- cgit v1.2.3-70-g09d2 From 23c74bf5fe592dff5f6b07c62fa3f909d917f308 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 16 Oct 2015 12:32:33 -0700 Subject: ARM: dts: Add basic support for isee igepv5 With omap5-board-common.dtsi, we can now easily add support for various omap5 board variants. Let's add minimal support for isee igepv5. So far I've tested that basic things work, such as serial, USB Ethernet, HDMI and WLAN. Note that like omap5-uevm, these boards seem to need to reserve 16MB for a trap section as in commit 03178c66d289 ("ARM: dts: omap5-evm: Update available memory to 2032 MB") and also noted in a u-boot commit at http://marc.info/?l=u-boot&m=134376852603255 and also at http://patchwork.ozlabs.org/patch/159881/. Not sure why this is not needed for omap5-cm-t54.dts, maybe because of different u-boot configuration. Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/omap5-igep0050.dts | 54 ++++++++++++++++++++++++++++++++++++ 2 files changed, 55 insertions(+) create mode 100644 arch/arm/boot/dts/omap5-igep0050.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index e45d771456f3..2c12411fb641 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -471,6 +471,7 @@ dtb-$(CONFIG_SOC_AM43XX) += \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += \ omap5-cm-t54.dtb \ + omap5-igep0050.dtb \ omap5-sbc-t54.dtb \ omap5-uevm.dtb dtb-$(CONFIG_SOC_DRA7XX) += \ diff --git a/arch/arm/boot/dts/omap5-igep0050.dts b/arch/arm/boot/dts/omap5-igep0050.dts new file mode 100644 index 000000000000..46ecb1dd3b5c --- /dev/null +++ b/arch/arm/boot/dts/omap5-igep0050.dts @@ -0,0 +1,54 @@ +/* + * Copyright (C) 2013 ISEE 2007 SL - http://www.isee.biz/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "omap5-board-common.dtsi" + +/ { + model = "IGEPv5"; + compatible = "isee,omap5-igep0050", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x7f000000>; /* 2032 MB */ + }; +}; + +&hdmi { + vdda-supply = <&ldo7_reg>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_pins>; + + tca6416: tca6416@21 { + compatible = "ti,tca6416"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + +&omap5_pmx_core { + i2c4_pins: pinmux_i2c4_pins { + pinctrl-single,pins = < + OMAP5_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0) /* i2c4_scl */ + OMAP5_IOPAD(0x0fa, PIN_INPUT | MUX_MODE0) /* i2c4_sda */ + >; + }; +}; + +&tpd12s015 { + gpios = <&tca6416 11 0>, /* TCA6416 P01, CT_CP_HDP */ + <&tca6416 12 0>, /* TCA6416 P00, LS_OE*/ + <&gpio7 1 0>, /* 193, HPD */ + <&gpio7 2 0>, /* 194, SCL */ + <&gpio7 3 0>; /* 195, SDA */ +}; + -- cgit v1.2.3-70-g09d2 From 6d55d339fa6f957c1ef52dfa2ac85445c62c5a13 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 15 Oct 2015 16:28:45 +0200 Subject: ARM: dts: sunxi: Fix interrupt-cells for [r]pio on A23/A31/A33/A80 When the gpio interrupt bindings where changed to add a bank to the specifier list, the r_pio nodes of A23/A31/A33 where not updated to match and neither was the pio node of the A80, this fixes this. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 2 +- arch/arm/boot/dts/sun8i-a23-a33.dtsi | 1 + arch/arm/boot/dts/sun9i-a80.dtsi | 2 +- 3 files changed, 3 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 98359f37bf11..a97274a85159 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -1102,7 +1102,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi index a1e3acd325f4..0c0964d4fa1f 100644 --- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi +++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi @@ -655,6 +655,7 @@ resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; + #interrupt-cells = <3>; #address-cells = <1>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi index 5908e3dcf965..1118bf5cc4fb 100644 --- a/arch/arm/boot/dts/sun9i-a80.dtsi +++ b/arch/arm/boot/dts/sun9i-a80.dtsi @@ -594,7 +594,7 @@ clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <3>; #size-cells = <0>; #gpio-cells = <3>; -- cgit v1.2.3-70-g09d2 From 5edab366c633af72c5fa2dd2bb067fd5f534d031 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 15 Oct 2015 16:28:46 +0200 Subject: ARM: dts: sun6i: Add mmc2_pins_a pinmux setting to sun6i-a31.dtsi Add a pinmux setting for using mmc2 in regular 4 bit mode. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a97274a85159..83c18798cae0 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -691,7 +691,15 @@ allwinner,pull = ; }; - mmc2_8bit_emmc_pins: mmc2@0 { + mmc2_pins_a: mmc2@0 { + allwinner,pins = "PC6", "PC7", "PC8", "PC9", + "PC10", "PC11"; + allwinner,function = "mmc2"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc2_8bit_emmc_pins: mmc2@1 { allwinner,pins = "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", -- cgit v1.2.3-70-g09d2 From c2aa565107fb539a84494fe8dac5fd5eb5678123 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 15 Oct 2015 16:28:47 +0200 Subject: ARM: dts: sun6i: Add a dts file for the Sinovoip BPI-M2 board The Sinovoip BPI-M2 is a SBC board based on the A31s SoC it features 1G RAM, a microsd slot, Gbit ethernet, 4 usb-a USB-2 ports, ir receiver, stereo headphone jack and hdmi video output. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 194 +++++++++++++++++++++++ 2 files changed, 195 insertions(+) create mode 100644 arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 71f965504391..2eaa45b387c2 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-cs908.dtb \ + sun6i-a31s-sinovoip-bpi-m2.dtb \ sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapi.dtb \ diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts new file mode 100644 index 000000000000..db7fa13f5425 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -0,0 +1,194 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" +#include + +/ { + model = "Sinovoip BPI-M2"; + compatible = "sinovoip,bpi-m2", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_bpi_m2>; + + blue { + label = "bpi-m2:blue:usr"; + gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */ + }; + + green { + label = "bpi-m2:green:usr"; + gpios = <&pio 6 10 GPIO_ACTIVE_HIGH>; /* PG10 */ + }; + + red { + label = "bpi-m2:red:usr"; + gpios = <&pio 6 5 GPIO_ACTIVE_HIGH>; /* PG5 */ + }; + }; + + mmc2_pwrseq: mmc2_pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pwrseq_pin_bpi_m2>; + reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 WIFI_EN */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; + phy = <&phy1>; + phy-mode = "rgmii"; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ + snps,reset-active-low; + snps,reset-delays-us = <0 10000 30000>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&mmc0_pins_a { + allwinner,pull = ; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins_a>; + vmmc-supply = <®_vcc3v0>; + mmc-pwrseq = <&mmc2_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&r_pio>; + interrupts = <0 5 IRQ_TYPE_LEVEL_LOW>; /* PL5 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2_pins_a { + allwinner,pull = ; +}; + +&ohci0 { + status = "okay"; +}; + +&pio { + gmac_phy_reset_pin_bpi_m2: gmac_phy_reset_pin@0 { + allwinner,pins = "PA21"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + led_pins_bpi_m2: led_pins@0 { + allwinner,pins = "PG5", "PG10", "PG11"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_bpi_m2: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&r_pio { + mmc2_pwrseq_pin_bpi_m2: mmc2_pwrseq_pin@0 { + allwinner,pins = "PL8"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 322d09d6ea04de986d978312de75139b4586ecbe Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 5 Aug 2015 01:48:35 +0800 Subject: ARM: dts: imx6ul: add sram support for i.mx6ul Add SRAM support for i.MX6UL, it has 128KB ocram starting from 0x900000. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 09edbedfd908..32ed9d57c322 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -135,6 +135,11 @@ status = "disabled"; }; + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + }; + aips1: aips-bus@02000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 51a374438c33950dd9effc33a005dac2ccc52a2b Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Wed, 5 Aug 2015 01:48:36 +0800 Subject: ARM: dts: imx6ul: add mmdc support for i.mx6ul Add MMDC support for i.MX6UL. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul.dtsi | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 32ed9d57c322..c2eb3d4b976e 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -630,6 +630,11 @@ status = "disabled"; }; + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6ul-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + qspi: qspi@021e0000 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-70-g09d2 From ab0a05d818d5a6e322e6ccd11a33845b477f9ab7 Mon Sep 17 00:00:00 2001 From: Anson Huang Date: Sun, 6 Sep 2015 15:29:34 +0800 Subject: ARM: dts: imx6ul: add pm_power_off support i.MX6UL can be powered off by programming SNVS. When long press ON/OFF button(5 seconds), PMIC_ON_REQ pin will be set to low and external PMIC will be powered off. And system can be powered on by long press ON/OFF button again. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul-14x14-evk.dts | 4 ++++ arch/arm/boot/dts/imx6ul.dtsi | 8 ++++++++ 2 files changed, 12 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 25746b122ea6..2fe5b1f71705 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -87,6 +87,10 @@ }; }; +&snvs_poweroff { + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index c2eb3d4b976e..96b00c6b1a80 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -429,6 +429,14 @@ ; }; + snvs_poweroff: snvs-poweroff { + compatible = "syscon-poweroff"; + regmap = <&snvs>; + offset = <0x38>; + mask = <0x60>; + status = "disabled"; + }; + snvs_pwrkey: snvs-powerkey { compatible = "fsl,sec-v4.0-pwrkey"; regmap = <&snvs>; -- cgit v1.2.3-70-g09d2 From f651d7816b97fc1468c4b637628a8951a3cb9dac Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Tue, 11 Aug 2015 19:38:29 +0800 Subject: ARM: dts: imx7d-sdb: add eMMC5.0 support imx7d-sdb board has a eMMC5.0 on usdhc3. This eMMC support HS400. This patch add usdhc3 support for HS400 Signed-off-by: Haibo Chen Acked-by: Dong Aisheng Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index fdd1d7c9a5cc..805945873527 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -241,6 +241,19 @@ status = "okay"; }; +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>; + assigned-clock-rates = <400000000>; + bus-width = <8>; + fsl,tuning-step = <2>; + non-removable; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; -- cgit v1.2.3-70-g09d2 From a7be1e687731e2444f4ea261897b2e8448f5acbf Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Wed, 12 Aug 2015 22:21:56 +0000 Subject: ARM: mxs: enable ocotp for i.MX23 and i.MX28 This patch enables On Chip OTP support for i.MX23 and i.MX28 SoCs, but keeps the old compatible string. Signed-off-by: Stefan Wahren Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx23.dtsi | 6 ++++-- arch/arm/boot/dts/imx28.dtsi | 6 ++++-- 2 files changed, 8 insertions(+), 4 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index b995333ea22b..1c6c07538a78 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -383,9 +383,11 @@ }; ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx23-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 15>; }; axi-ahb@8002e000 { diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4e073e854742..c5b57d4adade 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -936,9 +936,11 @@ }; ocotp: ocotp@8002c000 { - compatible = "fsl,ocotp"; + compatible = "fsl,imx28-ocotp", "fsl,ocotp"; + #address-cells = <1>; + #size-cells = <1>; reg = <0x8002c000 0x2000>; - status = "disabled"; + clocks = <&clks 25>; }; axi-ahb@8002e000 { -- cgit v1.2.3-70-g09d2 From 79826ac6bb6d12c9a71f6e8db798d3714819d2d5 Mon Sep 17 00:00:00 2001 From: Rafał Miłecki Date: Sun, 16 Aug 2015 08:39:17 +0200 Subject: ARM: dts: imx: add "jedec,spi-nor" flash compatible binding MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Starting with commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor"") we have "jedec,spi-nor" binding indicating support for JEDEC identification. Use it for all flashes that are supposed to support READ ID op according to the datasheets. Signed-off-by: Rafał Miłecki Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx28-evk.dts | 2 +- arch/arm/boot/dts/imx28-m28evk.dts | 2 +- arch/arm/boot/dts/imx50-evk.dts | 2 +- arch/arm/boot/dts/imx53-smd.dts | 2 +- arch/arm/boot/dts/imx6dl-rex-basic.dts | 2 +- arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts | 2 +- arch/arm/boot/dts/imx6q-gw5400-a.dts | 2 +- arch/arm/boot/dts/imx6q-rex-pro.dts | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 2 +- arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/boot/dts/imx6sl-evk.dts | 2 +- arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++-- arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++-- 19 files changed, 21 insertions(+), 21 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 279249b8c3f3..e3ef94ac159f 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -57,7 +57,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index e35cc6ba3ca6..8d04e57039bc 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -41,7 +41,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx50-evk.dts b/arch/arm/boot/dts/imx50-evk.dts index 1b22512c91bd..27d763c7a307 100644 --- a/arch/arm/boot/dts/imx50-evk.dts +++ b/arch/arm/boot/dts/imx50-evk.dts @@ -33,7 +33,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "m25p32", "m25p80"; + compatible = "m25p32", "jedec,spi-nor"; spi-max-frequency = <25000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index fc89ce1e5763..542ab9e697fb 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -76,7 +76,7 @@ flash: m25p32@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32", "st,m25p"; + compatible = "st,m25p32", "st,m25p", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts index b13845c2823b..c3a14a4330a2 100644 --- a/arch/arm/boot/dts/imx6dl-rex-basic.dts +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index 4fa254347798..364578d707a5 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -109,7 +109,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <40000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 822ffb231c57..58adf176425a 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -145,7 +145,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,w25q256"; + compatible = "sst,w25q256", "jedec,spi-nor"; spi-max-frequency = <30000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts index 3c2852b16f78..90ea61ae04e9 100644 --- a/arch/arm/boot/dts/imx6q-rex-pro.dts +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -23,7 +23,7 @@ &ecspi3 { flash: m25p80@0 { - compatible = "sst,sst25vf032b"; + compatible = "sst,sst25vf032b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi index f4d6ae564ead..ecbc6eba6a2c 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -109,7 +109,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi index a47a0399a172..7d81100e7d47 100644 --- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi @@ -141,7 +141,7 @@ flash: m25p80@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q128a11"; + compatible = "micron,n25q128a11", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <1>; }; diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi index 45e7c39e80d5..da1341d47b14 100644 --- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi +++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi @@ -38,7 +38,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "sst,sst25vf040b", "m25p80"; + compatible = "sst,sst25vf040b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 340bc8e42650..04278ba80f6e 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -182,7 +182,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 9e6ecd99b472..e81f38fb9424 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -80,7 +80,7 @@ cs-gpios = <&gpio4 24 0>; flash@0 { - compatible = "m25p80"; + compatible = "m25p80", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index c37bb9ff9fac..8263fc18a7d9 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -133,7 +133,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index ce4c7313f509..2f8510632f95 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -181,7 +181,7 @@ status = "okay"; flash: m25p80@0 { - compatible = "sst,sst25vf016b"; + compatible = "sst,sst25vf016b", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 2c07d3a86b61..a6d445c17779 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -158,7 +158,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index b84dff2e94ea..be118820e9f7 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -126,7 +126,7 @@ flash: m25p80@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p32"; + compatible = "st,m25p32", "jedec,spi-nor"; spi-max-frequency = <20000000>; reg = <0>; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts index c76b87cba275..71005478cdf0 100644 --- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts +++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts @@ -129,7 +129,7 @@ reg = <0>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; @@ -137,7 +137,7 @@ reg = <1>; #address-cells = <1>; #size-cells = <1>; - compatible = "spansion,s25fl128s"; + compatible = "spansion,s25fl128s", "jedec,spi-nor"; spi-max-frequency = <66000000>; }; }; diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 0bfc4e7865b2..0ad164ab5729 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -130,7 +130,7 @@ flash0: n25q256a@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <0>; }; @@ -138,7 +138,7 @@ flash1: n25q256a@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "micron,n25q256a"; + compatible = "micron,n25q256a", "jedec,spi-nor"; spi-max-frequency = <29000000>; reg = <1>; }; -- cgit v1.2.3-70-g09d2 From 1387349d0abc73590b3bf7fc613d546bfab7fd52 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 2 Sep 2015 12:55:21 -0300 Subject: ARM: dts: imx6sl: Complete the dcp node The DCP block present on MX6SL is compatible with the one on MX28, so add the compatible string and also complete the interrupt entries. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sl.dtsi | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 320a27f8889e..ebe8670f3ae6 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -670,8 +670,11 @@ }; dcp: dcp@020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; }; }; -- cgit v1.2.3-70-g09d2 From 208c9fe21511bd13831f4802aaf3bfa860728248 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 2 Sep 2015 15:16:20 -0300 Subject: ARM: dts: imx7d: Add PWM support Add the PWM1-4 nodes. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 52 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index b738ce0f9d9b..15c219357b77 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -570,6 +570,58 @@ }; }; + aips2: aips-bus@30400000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30400000 0x400000>; + ranges; + + pwm1: pwm@30660000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30660000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM1_ROOT_CLK>, + <&clks IMX7D_PWM1_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm2: pwm@30670000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30670000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM2_ROOT_CLK>, + <&clks IMX7D_PWM2_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm3: pwm@30680000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30680000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM3_ROOT_CLK>, + <&clks IMX7D_PWM3_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + + pwm4: pwm@30690000 { + compatible = "fsl,imx7d-pwm", "fsl,imx27-pwm"; + reg = <0x30690000 0x10000>; + interrupts = ; + clocks = <&clks IMX7D_PWM4_ROOT_CLK>, + <&clks IMX7D_PWM4_ROOT_CLK>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + status = "disabled"; + }; + }; + aips3: aips-bus@30800000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; -- cgit v1.2.3-70-g09d2 From 3add09695ba0f512e653890a9d56973bf9dbb1c2 Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Fri, 28 Aug 2015 17:09:35 +0800 Subject: ARM: dts: imx6ul.dtsi: add TSC support Add imx6ul touchscreen controller support. TSC module need ADC2 module to measure the touchscreen coordinate value. This patch put TSC and ADC2 together, make ADC2 module only be used for TSC, can't be used as a normal ADC. Signed-off-by: Haibo Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi index 96b00c6b1a80..d00e994bdbd2 100644 --- a/arch/arm/boot/dts/imx6ul.dtsi +++ b/arch/arm/boot/dts/imx6ul.dtsi @@ -584,6 +584,17 @@ status = "disabled"; }; + tsc: tsc@02040000 { + compatible = "fsl,imx6ul-tsc"; + reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6UL_CLK_IPG>, + <&clks IMX6UL_CLK_ADC2>; + clock-names = "tsc", "adc"; + status = "disabled"; + }; + usdhc1: usdhc@02190000 { compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc"; reg = <0x02190000 0x4000>; -- cgit v1.2.3-70-g09d2 From d272c07b5304f913258127eb722dae7730fbfc5f Mon Sep 17 00:00:00 2001 From: Haibo Chen Date: Fri, 28 Aug 2015 17:09:36 +0800 Subject: ARM: dts: imx6ul-14x14-evk.dts: add tsc support Add touch screen surpport for i.MX6UL-EVK board. Signed-off-by: Haibo Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6ul-14x14-evk.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dts b/arch/arm/boot/dts/imx6ul-14x14-evk.dts index 2fe5b1f71705..6aaa5ec3d846 100644 --- a/arch/arm/boot/dts/imx6ul-14x14-evk.dts +++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dts @@ -91,6 +91,15 @@ status = "okay"; }; +&tsc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc>; + xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>; + measure-delay-time = <0xffff>; + pre-charge-time = <0xfff>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -281,6 +290,15 @@ >; }; + pinctrl_tsc: tscgrp { + fsl,pins = < + MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0 + MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0 + MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0 + MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1 -- cgit v1.2.3-70-g09d2 From 816aa61c331b763fcb5346eefe8546da5cb588d8 Mon Sep 17 00:00:00 2001 From: Horia Geantă Date: Wed, 12 Aug 2015 10:42:41 +0300 Subject: ARM: dts: ls1021a: add crypto node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Horia Geantă Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 973a496207fc..157588310107 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -53,6 +53,7 @@ interrupt-parent = <&gic>; aliases { + crypto = &crypto; ethernet0 = &enet0; ethernet1 = &enet1; ethernet2 = &enet2; @@ -148,6 +149,45 @@ big-endian; }; + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.0", "fsl,sec-v4.0"; + fsl,sec-era = <7>; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0 0x1700000 0x0 0x100000>; + ranges = <0x0 0x0 0x1700000 0x100000>; + interrupts = ; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = ; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = ; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = ; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = ; + }; + + }; + clockgen: clocking@1ee1000 { #address-cells = <1>; #size-cells = <1>; -- cgit v1.2.3-70-g09d2 From 0f629217cf4bd43fd1240323a0a1f0af8d9ee235 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 7 Sep 2015 10:55:01 +0800 Subject: ARM: dts: imx7d: add fec1 and fec2 support for i.MX7d soc Add fec1 and fec2 nodes for i.MX7d soc. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index 15c219357b77..d51aee789d1e 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -781,6 +781,42 @@ bus-width = <4>; status = "disabled"; }; + + fec1: ethernet@30be0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30be0000 0x10000>; + interrupts = , + , + ; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; + + fec2: ethernet@30bf0000 { + compatible = "fsl,imx7d-fec", "fsl,imx6sx-fec"; + reg = <0x30bf0000 0x10000>; + interrupts = , + , + ; + clocks = <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET_AXI_ROOT_CLK>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>, + <&clks IMX7D_PLL_ENET_MAIN_125M_CLK>, + <&clks IMX7D_ENET_PHY_REF_ROOT_CLK>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + fsl,num-tx-queues=<3>; + fsl,num-rx-queues=<3>; + status = "disabled"; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 60f5a223821b6ba471a5bc555338ab892908e99e Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Sep 2015 22:57:11 -0300 Subject: ARM: dts: imx7d: Add USB support Add USB OTG and Host support. Signed-off-by: Fabio Estevam Acked-by: Peter Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 71 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 71 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index d51aee789d1e..fcf6be2f9f68 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -746,6 +746,77 @@ status = "disabled"; }; + usbotg1: usb@30b10000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b10000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop1>; + fsl,usbmisc = <&usbmisc1 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbotg2: usb@30b20000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b20000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop2>; + fsl,usbmisc = <&usbmisc2 0>; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbh: usb@30b30000 { + compatible = "fsl,imx7d-usb", "fsl,imx27-usb"; + reg = <0x30b30000 0x200>; + interrupts = ; + clocks = <&clks IMX7D_USB_CTRL_CLK>; + fsl,usbphy = <&usbphynop3>; + fsl,usbmisc = <&usbmisc3 0>; + phy_type = "hsic"; + dr_mode = "host"; + phy-clkgate-delay-us = <400>; + status = "disabled"; + }; + + usbmisc1: usbmisc@30b10200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b10200 0x200>; + }; + + usbmisc2: usbmisc@30b20200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b20200 0x200>; + }; + + usbmisc3: usbmisc@30b30200 { + #index-cells = <1>; + compatible = "fsl,imx7d-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x30b30200 0x200>; + }; + + usbphynop1: usbphynop1 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY1_CLK>; + clock-names = "main_clk"; + }; + + usbphynop2: usbphynop2 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_PHY2_CLK>; + clock-names = "main_clk"; + }; + + usbphynop3: usbphynop3 { + compatible = "usb-nop-xceiv"; + clocks = <&clks IMX7D_USB_HSIC_ROOT_CLK>; + clock-names = "main_clk"; + }; + usdhc1: usdhc@30b40000 { compatible = "fsl,imx7d-usdhc", "fsl,imx6sl-usdhc"; reg = <0x30b40000 0x10000>; -- cgit v1.2.3-70-g09d2 From a81fd34da086a62907d2cca920b4788bfc71357f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 7 Sep 2015 22:57:12 -0300 Subject: ARM: dts: imx7d-sdb: Add USB support Add support for USBOTG1 and USBOTG2. Signed-off-by: Fabio Estevam Acked-by: Peter Chen Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 805945873527..0e4de5aaf6bd 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -231,6 +231,17 @@ status = "okay"; }; +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + &usdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc1>; -- cgit v1.2.3-70-g09d2 From 70b5ea97281fb9ee1ed17c9b9c866a6604b843df Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Mon, 14 Sep 2015 14:45:28 +0800 Subject: ARM: ls1021a: Add dma-coherent property for eTSEC nodes This patch adds dma-coherent property for eTSEC nodes, so coherent DMA operations are supported. Signed-off-by: Alison Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 3 +++ 1 file changed, 3 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 157588310107..2798058ea4e5 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -445,6 +445,7 @@ model = "eTSEC"; fsl,magic-packet; ranges; + dma-coherent; queue-group@2d10000 { #address-cells = <2>; @@ -473,6 +474,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d50000 { #address-cells = <2>; @@ -501,6 +503,7 @@ interrupt-parent = <&gic>; model = "eTSEC"; ranges; + dma-coherent; queue-group@2d90000 { #address-cells = <2>; -- cgit v1.2.3-70-g09d2 From 60f0ea12d59ed366547b0a3fd5b3a76fccb56899 Mon Sep 17 00:00:00 2001 From: Yuan Yao Date: Wed, 16 Sep 2015 16:20:43 +0800 Subject: ARM: dts: Add node for ina220 on LS1021ATWR The INA220 monitors both shunt drop and supply voltage. Signed-off-by: Yuan Yao Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a-twr.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts index e008f9367510..fbb89d13401e 100644 --- a/arch/arm/boot/dts/ls1021a-twr.dts +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -144,6 +144,19 @@ &i2c0 { status = "okay"; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; &i2c1 { -- cgit v1.2.3-70-g09d2 From 5b8e6ed482b3913c4af26f537b0bc27c77cac452 Mon Sep 17 00:00:00 2001 From: Adrian Alonso Date: Fri, 18 Sep 2015 11:29:52 -0500 Subject: ARM: dts: imx7d-pinfunc: add gpio1 pad iomux settings - Add imx7 SoC GPIO1 pad iomuxc settings - Fix UART input select daisy chain setting values Signed-off-by: Adrian Alonso Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-pinfunc.h | 122 +++++++++++++++++++++++++++++++++++++- 1 file changed, 119 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h index a8d81497edb3..eeda78347619 100644 --- a/arch/arm/boot/dts/imx7d-pinfunc.h +++ b/arch/arm/boot/dts/imx7d-pinfunc.h @@ -15,6 +15,122 @@ * */ +#define MX7D_PAD_GPIO1_IO00__GPIO1_IO0 0x0000 0x0030 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO00__PWM4_OUT 0x0000 0x0030 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_ANY 0x0000 0x0030 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG_B 0x0000 0x0030 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO00__WDOD1_WDOG__RST_B_DEB 0x0000 0x0030 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__GPIO1_IO1 0x0004 0x0034 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO01__PWM1_OUT 0x0004 0x0034 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO01__CCM_ENET_REF_CLK3 0x0004 0x0034 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO01__SAI1_MCLK 0x0004 0x0034 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO01__ANATOP_24M_OUT 0x0004 0x0034 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO01__OBSERVE0_OUT 0x0004 0x0034 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__GPIO1_IO2 0x0008 0x0038 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO02__PWM2_OUT 0x0008 0x0038 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_ENET_REF_CLK1 0x0008 0x0038 0x0564 0x2 0x3 +#define MX7D_PAD_GPIO1_IO02__SAI2_MCLK 0x0008 0x0038 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO02__CCM_CLKO1 0x0008 0x0038 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO02__OBSERVE1_OUT 0x0008 0x0038 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO02__USB_OTG1_ID 0x0008 0x0038 0x0734 0x7 0x3 +#define MX7D_PAD_GPIO1_IO03__GPIO1_IO3 0x000C 0x003C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO03__PWM3_OUT 0x000C 0x003C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_ENET_REF_CLK2 0x000C 0x003C 0x0570 0x2 0x3 +#define MX7D_PAD_GPIO1_IO03__SAI3_MCLK 0x000C 0x003C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO03__CCM_CLKO2 0x000C 0x003C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO03__OBSERVE2_OUT 0x000C 0x003C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO03__USB_OTG2_ID 0x000C 0x003C 0x0730 0x7 0x3 +#define MX7D_PAD_GPIO1_IO04__GPIO1_IO4 0x0010 0x0040 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO04__USB_OTG1_OC 0x0010 0x0040 0x072C 0x1 0x1 +#define MX7D_PAD_GPIO1_IO04__FLEXTIMER1_CH4 0x0010 0x0040 0x0594 0x2 0x1 +#define MX7D_PAD_GPIO1_IO04__UART5_CTS_B 0x0010 0x0040 0x0710 0x3 0x4 +#define MX7D_PAD_GPIO1_IO04__I2C1_SCL 0x0010 0x0040 0x05D4 0x4 0x2 +#define MX7D_PAD_GPIO1_IO04__OBSERVE3_OUT 0x0010 0x0040 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO05__GPIO1_IO5 0x0014 0x0044 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR 0x0014 0x0044 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO05__FLEXTIMER1_CH5 0x0014 0x0044 0x0598 0x2 0x1 +#define MX7D_PAD_GPIO1_IO05__UART5_RTS_B 0x0014 0x0044 0x0710 0x3 0x5 +#define MX7D_PAD_GPIO1_IO05__I2C1_SDA 0x0014 0x0044 0x05D8 0x4 0x2 +#define MX7D_PAD_GPIO1_IO05__OBSERVE4_OUT 0x0014 0x0044 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO06__GPIO1_IO6 0x0018 0x0048 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO06__USB_OTG2_OC 0x0018 0x0048 0x0728 0x1 0x1 +#define MX7D_PAD_GPIO1_IO06__FLEXTIMER1_CH6 0x0018 0x0048 0x059C 0x2 0x1 +#define MX7D_PAD_GPIO1_IO06__UART5_RX_DATA 0x0018 0x0048 0x0714 0x3 0x4 +#define MX7D_PAD_GPIO1_IO06__I2C2_SCL 0x0018 0x0048 0x05DC 0x4 0x2 +#define MX7D_PAD_GPIO1_IO06__CCM_WAIT 0x0018 0x0048 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO06__KPP_ROW4 0x0018 0x0048 0x0624 0x6 0x1 +#define MX7D_PAD_GPIO1_IO07__GPIO1_IO7 0x001C 0x004C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO07__USB_OTG2_PWR 0x001C 0x004C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO07__FLEXTIMER1_CH7 0x001C 0x004C 0x05A0 0x2 0x1 +#define MX7D_PAD_GPIO1_IO07__UART5_TX_DATA 0x001C 0x004C 0x0714 0x3 0x5 +#define MX7D_PAD_GPIO1_IO07__I2C2_SDA 0x001C 0x004C 0x05E0 0x4 0x2 +#define MX7D_PAD_GPIO1_IO07__CCM_STOP 0x001C 0x004C 0x0000 0x5 0x0 +#define MX7D_PAD_GPIO1_IO07__KPP_COL4 0x001C 0x004C 0x0604 0x6 0x1 +#define MX7D_PAD_GPIO1_IO08__GPIO1_IO8 0x0014 0x026C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO08__SD1_VSELECT 0x0014 0x026C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0014 0x026C 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DCE_RX 0x0014 0x026C 0x0704 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__UART3_DTE_TX 0x0014 0x026C 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO08__I2C3_SCL 0x0014 0x026C 0x05E4 0x4 0x0 +#define MX7D_PAD_GPIO1_IO08__KPP_COL5 0x0014 0x026C 0x0608 0x6 0x0 +#define MX7D_PAD_GPIO1_IO08__PWM1_OUT 0x0014 0x026C 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO09__GPIO1_IO9 0x0018 0x0270 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO09__SD1_LCTL 0x0018 0x0270 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_ENET_REF_CLK3 0x0018 0x0270 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DCE_TX 0x0018 0x0270 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO09__UART3_DTE_RX 0x0018 0x0270 0x0704 0x3 0x1 +#define MX7D_PAD_GPIO1_IO09__I2C3_SDA 0x0018 0x0270 0x05E8 0x4 0x0 +#define MX7D_PAD_GPIO1_IO09__CCM_PMIC_READY 0x0018 0x0270 0x04F4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO09__KPP_ROW5 0x0018 0x0270 0x0628 0x6 0x0 +#define MX7D_PAD_GPIO1_IO09__PWM2_OUT 0x0018 0x0270 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO10__GPIO1_IO10 0x001C 0x0274 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO10__SD2_LCTL 0x001C 0x0274 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x001C 0x0274 0x0568 0x2 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DCE_RTS 0x001C 0x0274 0x0700 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__UART3_DTE_CTS 0x001C 0x0274 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO10__I2C4_SCL 0x001C 0x0274 0x05EC 0x4 0x0 +#define MX7D_PAD_GPIO1_IO10__FLEXTIMER1_PHA 0x001C 0x0274 0x05A4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO10__KPP_COL6 0x001C 0x0274 0x060C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO10__PWM3_OUT 0x001C 0x0274 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO11__GPIO1_IO11 0x0020 0x0278 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO11__SD3_LCTL 0x0020 0x0278 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x0020 0x0278 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DCE_CTS 0x0020 0x0278 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO11__UART3_DTE_RTS 0x0020 0x0278 0x0700 0x3 0x1 +#define MX7D_PAD_GPIO1_IO11__I2C4_SDA 0x0020 0x0278 0x05F0 0x4 0x0 +#define MX7D_PAD_GPIO1_IO11__FLEXTIMER1_PHB 0x0020 0x0278 0x05A8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO11__KPP_ROW6 0x0020 0x0278 0x062C 0x6 0x0 +#define MX7D_PAD_GPIO1_IO11__PWM4_OUT 0x0020 0x0278 0x0000 0x7 0x0 +#define MX7D_PAD_GPIO1_IO12__GPIO1_IO12 0x0024 0x027C 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO12__SD2_VSELECT 0x0024 0x027C 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_ENET_REF_CLK1 0x0024 0x027C 0x0564 0x2 0x0 +#define MX7D_PAD_GPIO1_IO12__FLEXCAN1_RX 0x0024 0x027C 0x04DC 0x3 0x0 +#define MX7D_PAD_GPIO1_IO12__CM4_NMI 0x0024 0x027C 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO12__CCM_EXT_CLK1 0x0024 0x027C 0x04E4 0x5 0x0 +#define MX7D_PAD_GPIO1_IO12__SNVS_VIO_5 0x0024 0x027C 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO12__USB_OTG1_ID 0x0024 0x027C 0x0734 0x7 0x0 +#define MX7D_PAD_GPIO1_IO13__GPIO1_IO13 0x0028 0x0280 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO13__SD3_VSELECT 0x0028 0x0280 0x0000 0x1 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_ENET_REF_CLK2 0x0028 0x0280 0x0570 0x2 0x0 +#define MX7D_PAD_GPIO1_IO13__FLEXCAN1_TX 0x0028 0x0280 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO13__CCM_PMIC_READY 0x0028 0x0280 0x04F4 0x4 0x1 +#define MX7D_PAD_GPIO1_IO13__CCM_EXT_CLK2 0x0028 0x0280 0x04E8 0x5 0x0 +#define MX7D_PAD_GPIO1_IO13__SNVS_VIO_5_CTL 0x0028 0x0280 0x0000 0x6 0x0 +#define MX7D_PAD_GPIO1_IO13__USB_OTG2_ID 0x0028 0x0280 0x0730 0x7 0x0 +#define MX7D_PAD_GPIO1_IO14__GPIO1_IO14 0x002C 0x0284 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO14__SD3_CD_B 0x002C 0x0284 0x0738 0x1 0x0 +#define MX7D_PAD_GPIO1_IO14__ENET2_MDIO 0x002C 0x0284 0x0574 0x2 0x0 +#define MX7D_PAD_GPIO1_IO14__FLEXCAN2_RX 0x002C 0x0284 0x04E0 0x3 0x0 +#define MX7D_PAD_GPIO1_IO14__WDOG3_WDOG_B 0x002C 0x0284 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO14__CCM_EXT_CLK3 0x002C 0x0284 0x04EC 0x5 0x0 +#define MX7D_PAD_GPIO1_IO14__SDMA_EXT_EVENT0 0x002C 0x0284 0x06D8 0x6 0x0 +#define MX7D_PAD_GPIO1_IO15__GPIO1_IO15 0x0030 0x0288 0x0000 0x0 0x0 +#define MX7D_PAD_GPIO1_IO15__SD3_WP 0x0030 0x0288 0x073C 0x1 0x0 +#define MX7D_PAD_GPIO1_IO15__ENET2_MDC 0x0030 0x0288 0x0000 0x2 0x0 +#define MX7D_PAD_GPIO1_IO15__FLEXCAN2_TX 0x0030 0x0288 0x0000 0x3 0x0 +#define MX7D_PAD_GPIO1_IO15__WDOG4_WDOG_B 0x0030 0x0288 0x0000 0x4 0x0 +#define MX7D_PAD_GPIO1_IO15__CCM_EXT_CLK4 0x0030 0x0288 0x04F0 0x5 0x0 +#define MX7D_PAD_GPIO1_IO15__SDMA_EXT_EVENT1 0x0030 0x0288 0x06DC 0x6 0x0 #define MX7D_PAD_EPDC_DATA00__EPDC_DATA0 0x0034 0x02A4 0x0000 0x0 0x0 #define MX7D_PAD_EPDC_DATA00__SIM1_PORT2_TRXD 0x0034 0x02A4 0x0000 0x1 0x0 #define MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x0034 0x02A4 0x0000 0x2 0x0 @@ -453,7 +569,7 @@ #define MX7D_PAD_LCD_DATA23__EIM_ADDR26 0x0124 0x0394 0x0000 0x4 0x0 #define MX7D_PAD_LCD_DATA23__GPIO3_IO28 0x0124 0x0394 0x0000 0x5 0x0 #define MX7D_PAD_LCD_DATA23__I2C4_SDA 0x0124 0x0394 0x05F0 0x6 0x1 -#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x0000 0x0 0x0 +#define MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x0128 0x0398 0x06F4 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__UART1_DTE_TX 0x0128 0x0398 0x0000 0x0 0x0 #define MX7D_PAD_UART1_RX_DATA__I2C1_SCL 0x0128 0x0398 0x05D4 0x1 0x0 #define MX7D_PAD_UART1_RX_DATA__CCM_PMIC_READY 0x0128 0x0398 0x0000 0x2 0x0 @@ -469,7 +585,7 @@ #define MX7D_PAD_UART1_TX_DATA__ENET2_1588_EVENT0_OUT 0x012C 0x039C 0x0000 0x4 0x0 #define MX7D_PAD_UART1_TX_DATA__GPIO4_IO1 0x012C 0x039C 0x0000 0x5 0x0 #define MX7D_PAD_UART1_TX_DATA__ENET1_MDC 0x012C 0x039C 0x0000 0x6 0x0 -#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x0000 0x0 0x0 +#define MX7D_PAD_UART2_RX_DATA__UART2_DCE_RX 0x0130 0x03A0 0x06FC 0x0 0x2 #define MX7D_PAD_UART2_RX_DATA__UART2_DTE_TX 0x0130 0x03A0 0x0000 0x0 0x0 #define MX7D_PAD_UART2_RX_DATA__I2C2_SCL 0x0130 0x03A0 0x05DC 0x1 0x0 #define MX7D_PAD_UART2_RX_DATA__SAI3_RX_BCLK 0x0130 0x03A0 0x0000 0x2 0x0 @@ -501,7 +617,7 @@ #define MX7D_PAD_UART3_TX_DATA__ENET1_1588_EVENT0_OUT 0x013C 0x03AC 0x0000 0x4 0x0 #define MX7D_PAD_UART3_TX_DATA__GPIO4_IO5 0x013C 0x03AC 0x0000 0x5 0x0 #define MX7D_PAD_UART3_TX_DATA__SD2_LCTL 0x013C 0x03AC 0x0000 0x6 0x0 -#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0000 0x0 0x0 +#define MX7D_PAD_UART3_RTS_B__UART3_DCE_RTS 0x0140 0x03B0 0x0700 0x0 0x2 #define MX7D_PAD_UART3_RTS_B__UART3_DTE_CTS 0x0140 0x03B0 0x0000 0x0 0x0 #define MX7D_PAD_UART3_RTS_B__USB_OTG2_OC 0x0140 0x03B0 0x0728 0x1 0x0 #define MX7D_PAD_UART3_RTS_B__SAI3_TX_DATA0 0x0140 0x03B0 0x0000 0x2 0x0 -- cgit v1.2.3-70-g09d2 From 47bcc8c07a4a76b6f5786fb8fb8091c6d4764782 Mon Sep 17 00:00:00 2001 From: Fugang Duan Date: Mon, 7 Sep 2015 10:55:02 +0800 Subject: ARM: dts: imx7d-sdb: add fec1 and fec2 support Enable fec1 and fec2 for i.MX7d-sdb board. Signed-off-by: Fugang Duan Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d-sdb.dts | 76 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index 0e4de5aaf6bd..432aaf5d5ef7 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -101,6 +101,45 @@ arm-supply = <&sw1a_reg>; }; +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>, + <&clks IMX7D_ENET1_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy0>; + fsl,magic-packet; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + reg = <1>; + }; + }; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; + assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>, + <&clks IMX7D_ENET2_TIME_ROOT_CLK>; + assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; + assigned-clock-rates = <0>, <100000000>; + phy-mode = "rgmii"; + phy-handle = <ðphy1>; + fsl,magic-packet; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -270,6 +309,42 @@ pinctrl-0 = <&pinctrl_hog>; imx7d-sdb { + pinctrl_enet1: enet1grp { + fsl,pins = < + MX7D_PAD_GPIO1_IO10__ENET1_MDIO 0x3 + MX7D_PAD_GPIO1_IO11__ENET1_MDC 0x3 + MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x1 + MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x1 + MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x1 + MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x1 + MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x1 + MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x1 + MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x1 + MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x1 + MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x1 + MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x1 + MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x1 + MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x1 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x1 + MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x1 + MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x1 + MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x1 + MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x1 + MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x1 + MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x1 + MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x1 + MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x1 + MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x1 + MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x1 + MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x1 + >; + }; + pinctrl_hog: hoggrp { fsl,pins = < MX7D_PAD_UART3_CTS_B__GPIO4_IO7 0x14 @@ -305,7 +380,6 @@ >; }; - pinctrl_uart1: uart1grp { fsl,pins = < MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79 -- cgit v1.2.3-70-g09d2 From 149c08e075953dd6323545808cdfd8c95e9d1b20 Mon Sep 17 00:00:00 2001 From: Adrian Alonso Date: Fri, 25 Sep 2015 16:05:57 -0500 Subject: ARM: dts: imx: imx7d add iomuxc lpsr device node Add device tree node to support iomuxc-lpsr controller, fsl,input-sel phandle allows to get input select register base address which is shared from main iomuxc controller. Signed-off-by: Adrian Alonso Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx7d.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index fcf6be2f9f68..4ed0eea4cf1d 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi @@ -446,6 +446,12 @@ status = "disabled"; }; + iomuxc_lpsr: iomuxc-lpsr@302c0000 { + compatible = "fsl,imx7d-iomuxc-lpsr"; + reg = <0x302c0000 0x10000>; + fsl,input-sel = <&iomuxc>; + }; + gpt1: gpt@302d0000 { compatible = "fsl,imx7d-gpt", "fsl,imx6sx-gpt"; reg = <0x302d0000 0x10000>; -- cgit v1.2.3-70-g09d2 From bc6cde35893e300a3bd6b12ecbe75749486dc127 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 25 Sep 2015 20:35:30 +0300 Subject: ARM: dts: i.MX31: fix cpu compatible value The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy Cc: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx31.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi index c34f82581248..5fdb222636a7 100644 --- a/arch/arm/boot/dts/imx31.dtsi +++ b/arch/arm/boot/dts/imx31.dtsi @@ -25,7 +25,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; -- cgit v1.2.3-70-g09d2 From b2bbb1669d4f6c1513ba74351264a1abb69575f3 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 25 Sep 2015 20:35:31 +0300 Subject: ARM: dts: i.MX35: fix cpu compatible value The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy Cc: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx35.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index e6540b5cfa4c..ed3dc3391d1c 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -29,7 +29,7 @@ #size-cells = <0>; cpu { - compatible = "arm,arm1136"; + compatible = "arm,arm1136jf-s"; device_type = "cpu"; }; }; -- cgit v1.2.3-70-g09d2 From 6e994c5a1dc8c89671717575408c94316fe7f7d8 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Tue, 1 Sep 2015 18:06:53 +0530 Subject: ARM: dts: vf500-colibri: Add device tree node for touchscreen support Add device tree node for touchscreen support on Colibri VF50. The touchscreen functionality on VF50 uses the ADC channels of Vybrid and some GPIOs. Also add pinctrl nodes for proper pinmux. Signed-off-by: Sanchayan Maity Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf500-colibri-eval-v3.dts | 5 +++ arch/arm/boot/dts/vf500-colibri.dtsi | 47 +++++++++++++++++++++++++++++ 2 files changed, 52 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts index 7fc782c4fc52..c3173fc9e833 100644 --- a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -15,3 +15,8 @@ model = "Toradex Colibri VF50 on Colibri Evaluation Board"; compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; }; + +&touchscreen { + vf50-ts-min-pressure = <200>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi index cee34a32f25b..84f091d1fcf2 100644 --- a/arch/arm/boot/dts/vf500-colibri.dtsi +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -17,4 +17,51 @@ memory { reg = <0x80000000 0x8000000>; }; + + touchscreen: vf50-touchscreen { + compatible = "toradex,vf50-touchscreen"; + io-channels = <&adc1 0>,<&adc0 0>, + <&adc0 1>,<&adc1 2>; + xp-gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + xm-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>; + yp-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + ym-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "idle","default","gpios"; + pinctrl-0 = <&pinctrl_touchctrl_idle>; + pinctrl-1 = <&pinctrl_touchctrl_default>; + pinctrl-2 = <&pinctrl_touchctrl_gpios>; + vf50-ts-min-pressure = <200>; + status = "disabled"; + }; +}; + +&iomuxc { + vf610-colibri { + pinctrl_touchctrl_idle: touchctrl_idle { + fsl,pins = < + VF610_PAD_PTA18__GPIO_8 0x006d + VF610_PAD_PTA19__GPIO_9 0x006c + >; + }; + + pinctrl_touchctrl_default: touchctrl_default { + fsl,pins = < + VF610_PAD_PTA18__ADC0_SE0 0x0040 + VF610_PAD_PTA19__ADC0_SE1 0x0040 + VF610_PAD_PTA16__ADC1_SE0 0x0040 + VF610_PAD_PTB2__ADC1_SE2 0x0040 + >; + }; + + pinctrl_touchctrl_gpios: touchctrl_gpios { + fsl,pins = < + VF610_PAD_PTA23__GPIO_13 0x22e9 + VF610_PAD_PTB23__GPIO_93 0x22e9 + VF610_PAD_PTA22__GPIO_12 0x22e9 + VF610_PAD_PTA11__GPIO_4 0x22e9 + >; + }; + }; }; -- cgit v1.2.3-70-g09d2 From 9c3d8fa0604cdcd0b12c3bb3a4972a2413806cf9 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:05:19 +0200 Subject: ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel This patch adds support for the 7" LCD display available for Nitrogen6x: http://boundarydevices.com/product/7-800x480-display/ Also add label to backlight_lcd and connect it to the panel. Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 04278ba80f6e..7212f90eea83 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -124,7 +124,7 @@ mux-ext-port = <3>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -142,6 +142,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -354,6 +391,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -421,6 +491,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; -- cgit v1.2.3-70-g09d2 From d0ddcc5310934deff62d434dc5d2b82d729f87fa Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:05:20 +0200 Subject: ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel This patch adds support for the 7" LCD display available for Sabrelite: http://boundarydevices.com/product/7-800x480-display/ Also add label to backlight_lcd and connect it to the panel. Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++- 1 file changed, 75 insertions(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 2f8510632f95..65cdeb32aa79 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -123,7 +123,7 @@ mux-ext-port = <4>; }; - backlight_lcd { + backlight_lcd: backlight_lcd { compatible = "pwm-backlight"; pwms = <&pwm1 0 5000000>; brightness-levels = <0 4 8 16 32 64 128 255>; @@ -141,6 +141,43 @@ status = "okay"; }; + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + lcd_panel { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + panel { compatible = "hannstar,hsd100pxn1"; backlight = <&backlight_lvds>; @@ -348,6 +385,39 @@ >; }; + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + pinctrl_pwm1: pwm1grp { fsl,pins = < MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 @@ -416,6 +486,10 @@ }; }; +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + &ldb { status = "okay"; -- cgit v1.2.3-70-g09d2 From 140fa36f04fa534c17b31f135fc426a5620066db Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:38 +0200 Subject: ARM: dts: imx6dql-nitrogen6x: add touchscreen support This patch adds the different touchscreens that can be connected using the displays available for this board. http://boundarydevices.com/product-category/displays/ Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 7212f90eea83..27b0f6da7096 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -284,6 +284,21 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; }; &iomuxc { @@ -295,6 +310,7 @@ fsl,pins = < /* SGTL5000 sys_mclk */ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 >; }; -- cgit v1.2.3-70-g09d2 From f12fb7a27a5d0d3a71d949398a79500d5c75e297 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:39 +0200 Subject: ARM: dts: imx6qdl-nitrogen6x: add wifi wl1271 support Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 55 +++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 27b0f6da7096..69731747b57a 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -65,6 +65,19 @@ pinctrl-0 = <&pinctrl_can_xcvr>; gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; }; + + reg_wlan_vmmc: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; }; gpio-keys { @@ -481,6 +494,18 @@ >; }; + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17071 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10071 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17071 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17071 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17071 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17071 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -504,6 +529,15 @@ MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x1b0b0 /* CD */ >; }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; }; }; @@ -579,6 +613,27 @@ status = "okay"; }; +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; -- cgit v1.2.3-70-g09d2 From a0689609f06958ce4cdda22bf88de78241d87b66 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:40 +0200 Subject: ARM: dts: imx6qdl-nitrogen6x: relicense under GPLv2/X11 Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 40 +++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 40 +++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 5f4d33ccc4b3..54bc4cd0c21f 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index a57866b2e97e..8088cfc39b5d 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -3,12 +3,42 @@ * Copyright 2012 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 69731747b57a..caeed56b74a3 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -3,12 +3,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include #include -- cgit v1.2.3-70-g09d2 From 95a9e6cb9f38f980d01f8eee67b9004b86a9724c Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:41 +0200 Subject: ARM: dts: imx6qdl-sabrelite: relicense under GPLv2/X11 Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6q-sabrelite.dts | 40 ++++++++++++++++++++++++++++---- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 40 ++++++++++++++++++++++++++++---- 3 files changed, 105 insertions(+), 15 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl-sabrelite.dts b/arch/arm/boot/dts/imx6dl-sabrelite.dts index 2de04479dc35..0f06ca5c9146 100644 --- a/arch/arm/boot/dts/imx6dl-sabrelite.dts +++ b/arch/arm/boot/dts/imx6dl-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 96e4688be77c..66d10d8d534c 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ /dts-v1/; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 65cdeb32aa79..1a69a3420ac8 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -2,12 +2,42 @@ * Copyright 2011 Freescale Semiconductor, Inc. * Copyright 2011 Linaro Ltd. * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. */ #include #include -- cgit v1.2.3-70-g09d2 From 64618e71da2f93721fad2397a85a433c10ce2bfa Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:43 +0200 Subject: ARM: dts: imx6q-nitrogen6x: change manufacturer to Boundary Devices Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6q-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6q-nitrogen6x.dts b/arch/arm/boot/dts/imx6q-nitrogen6x.dts index 8088cfc39b5d..d1686339dc48 100644 --- a/arch/arm/boot/dts/imx6q-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6q-nitrogen6x.dts @@ -46,8 +46,8 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 Quad Nitrogen6x Board"; - compatible = "fsl,imx6q-nitrogen6x", "fsl,imx6q"; + model = "Boundary Devices i.MX6 Quad Nitrogen6x Board"; + compatible = "boundary,imx6q-nitrogen6x", "fsl,imx6q"; }; &sata { -- cgit v1.2.3-70-g09d2 From 4629cb7f473ea518d155e1a9f0ae818731977776 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:44 +0200 Subject: ARM: dts: imx6dl-nitrogen6x: change manufacturer to Boundary Devices Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6dl-nitrogen6x.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts index 54bc4cd0c21f..8398f979b912 100644 --- a/arch/arm/boot/dts/imx6dl-nitrogen6x.dts +++ b/arch/arm/boot/dts/imx6dl-nitrogen6x.dts @@ -46,6 +46,6 @@ #include "imx6qdl-nitrogen6x.dtsi" / { - model = "Freescale i.MX6 DualLite Nitrogen6x Board"; - compatible = "fsl,imx6dl-nitrogen6x", "fsl,imx6dl"; + model = "Boundary Devices i.MX6 DualLite Nitrogen6x Board"; + compatible = "boundary,imx6dl-nitrogen6x", "fsl,imx6dl"; }; -- cgit v1.2.3-70-g09d2 From b32e700256bce81a3cdea7869c6fe48b567ff434 Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:45 +0200 Subject: ARM: dts: imx: add Boundary Devices Nitrogen6_Max board Based on i.MX6 Quad with 4GB of DDR3. http://boundarydevices.com/product/nitrogen6max/ Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_max.dts | 53 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 873 +++++++++++++++++++++++++++ 3 files changed, 927 insertions(+) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_max.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 233159d2eaab..cc2951537fa8 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -313,6 +313,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-gw552x.dtb \ imx6q-hummingboard.dtb \ imx6q-nitrogen6x.dtb \ + imx6q-nitrogen6_max.dtb \ imx6q-phytec-pbab01.dtb \ imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ diff --git a/arch/arm/boot/dts/imx6q-nitrogen6_max.dts b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts new file mode 100644 index 000000000000..d417457ca6db --- /dev/null +++ b/arch/arm/boot/dts/imx6q-nitrogen6_max.dts @@ -0,0 +1,53 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-nitrogen6_max.dtsi" + +/ { + model = "Boundary Devices i.MX6 Quad Nitrogen6_MAX Board"; + compatible = "boundary,imx6q-nitrogen6_max", "fsl,imx6q"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi new file mode 100644 index 000000000000..a35d54fd9cd3 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi @@ -0,0 +1,873 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include +#include + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0xF0000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_1p8v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_2p5v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_h1_vbus: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio6 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + + reg_can_xcvr: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can_xcvr>; + gpio = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + power { + label = "Power Button"; + gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + linux,code = ; + gpio-key,wakeup; + }; + + menu { + label = "Menu"; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + home { + label = "Home"; + gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + back { + label = "Back"; + gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio7 13 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + i2cmux@2 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH + &gpio4 15 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c2>; + idle-state = <0>; + + i2c2@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + i2cmux@3 { + compatible = "i2c-mux-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3mux>; + #address-cells = <1>; + #size-cells = <0>; + mux-gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>; + i2c-parent = <&i2c3>; + idle-state = <0>; + + i2c3@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + speaker-enable { + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "off"; + }; + + ttymxc4-rs232 { + gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>; + retain-state-suspended; + default-state = "on"; + }; + }; + + backlight_lcd: backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds1: backlight_lvds1 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + lcd_display: display@di0 { + compatible = "fsl,imx-parallel-display"; + #address-cells = <1>; + #size-cells = <0>; + interface-pix-fmt = "bgr666"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j15>; + status = "okay"; + + port@0 { + reg = <0>; + + lcd_display_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + port@1 { + reg = <1>; + + lcd_display_out: endpoint { + remote-endpoint = <&lcd_panel_in>; + }; + }; + }; + + panel_lcd { + compatible = "okaya,rs800480t-7x0gp"; + backlight = <&backlight_lcd>; + + port { + lcd_panel_in: endpoint { + remote-endpoint = <&lcd_display_out>; + }; + }; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + panel_lvds1 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds1>; + + port { + panel_in_lvds1: endpoint { + remote-endpoint = <&lvds1_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6q-nitrogen6_max-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6q-nitrogen6_max-sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; + + rtc: rtc@68 { + compatible = "st,rv4162"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rv4162>; + reg = <0x68>; + interrupts-extended = <&gpio4 6 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iomuxc { + imx6q-nitrogen6_max { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_can_xcvr: can-xcvrgrp { + fsl,pins = < + /* Flexcan XCVR enable */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Power Button */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + /* Menu Button */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + /* Home Button */ + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + /* Back Button */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* Volume Up Button */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Volume Down Button */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2mux: i2c2muxgrp { + fsl,pins = < + /* ov5642 camera i2c enable */ + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x000b0 + /* ov5640_mipi camera i2c enable */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + >; + }; + + pinctrl_i2c3mux: i2c3muxgrp { + fsl,pins = < + /* PCIe I2C enable */ + MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x000b0 + >; + }; + + pinctrl_j15: j15grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + /* PCIe reset */ + MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x000b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_rv4162: rv4162grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x130b1 + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x030b1 + /* RS485 RX Enable: pull up */ + MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x1b0b1 + /* RS485 DEN: pull down */ + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b1 + /* RS485/!RS232 Select: pull down (rs232) */ + MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x030b1 + /* ON: pull down */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x030b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x0b0b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x100b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x100b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x000b0 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x000b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&lcd_display_in>; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; + + lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds1_out: endpoint { + remote-endpoint = <&panel_in_lvds1>; + }; + }; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usb_h1_vbus>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_wlan_vmmc>; + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + wlcore: wlcore@2 { + compatible = "ti,wl1271"; + reg = <2>; + interrupt-parent = <&gpio6>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + ref-clock-frequency = <38400000>; + }; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + bus-width = <4>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + vmmc-supply = <®_1p8v>; + keep-power-in-suspend; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 397a7d45355a25fa1445134fafb48850a24f2abb Mon Sep 17 00:00:00 2001 From: Gary Bisson Date: Wed, 30 Sep 2015 15:46:46 +0200 Subject: ARM: dts: imx: add Boundary Devices Nitrogen6_Lite board Based on an i.MX6 Solo with 512MB DDR3. http://boundarydevices.com/product/nitrogen6_lite/ Signed-off-by: Gary Bisson Signed-off-by: Shawn Guo --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6dl-nit6xlite.dts | 49 +++ arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 630 +++++++++++++++++++++++++++++++ 3 files changed, 680 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-nit6xlite.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index cc2951537fa8..b4afb42e2fc5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -284,6 +284,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-gw551x.dtb \ imx6dl-gw552x.dtb \ imx6dl-hummingboard.dtb \ + imx6dl-nit6xlite.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ imx6dl-rex-basic.dtb \ diff --git a/arch/arm/boot/dts/imx6dl-nit6xlite.dts b/arch/arm/boot/dts/imx6dl-nit6xlite.dts new file mode 100644 index 000000000000..e0161e46195c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-nit6xlite.dts @@ -0,0 +1,49 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-nit6xlite.dtsi" + +/ { + model = "Boundary Devices i.MX6 Solo Nitrogen6_Lite Board"; + compatible = "boundary,imx6dl-nit6xlite", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi new file mode 100644 index 000000000000..24d7d3f18464 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi @@ -0,0 +1,630 @@ +/* + * Copyright 2015 Boundary Devices, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This file is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include +#include + +/ { + chosen { + stdout-path = &uart2; + }; + + memory { + reg = <0x10000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_wlan_vmmc: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wlan_vmmc>; + regulator-name = "reg_wlan_vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + gpio = <&gpio6 7 GPIO_ACTIVE_HIGH>; + startup-delay-us = <70000>; + enable-active-high; + }; + }; + + bt_rfkill { + compatible = "rfkill-gpio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_bt_rfkill>; + gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>; + name = "bt_rfkill"; + type = <2>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + home { + label = "Home"; + gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>; + linux,code = <102>; + }; + + back { + label = "Back"; + gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>; + linux,code = <158>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + + j14-pin1 { + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pin3 { + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j14-pins8-9 { + gpios = <&gpio3 29 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin2 { + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + + j46-pin3 { + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + retain-state-suspended; + default-state = "off"; + }; + }; + + backlight_lcd { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + backlight_lvds0: backlight_lvds0 { + compatible = "pwm-backlight"; + pwms = <&pwm4 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + power-supply = <®_3p3v>; + status = "okay"; + }; + + panel_lvds0 { + compatible = "hannstar,hsd100pxn1"; + backlight = <&backlight_lvds0>; + + port { + panel_in_lvds0: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; + + sound { + compatible = "fsl,imx6dl-nit6xlite-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6dl-nit6xlite-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&clks { + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; +}; + +&ecspi1 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash: m25p80@0 { + compatible = "microchip,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>; + txen-skew-ps = <0>; + txc-skew-ps = <3000>; + rxdv-skew-ps = <0>; + rxc-skew-ps = <3000>; + rxd0-skew-ps = <0>; + rxd1-skew-ps = <0>; + rxd2-skew-ps = <0>; + rxd3-skew-ps = <0>; + txd0-skew-ps = <0>; + txd1-skew-ps = <0>; + txd2-skew-ps = <0>; + txd3-skew-ps = <0>; + interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>, + <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + touchscreen@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + wakeup-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + touchscreen@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_EDGE_FALLING>; + }; + + rtc@6f { + compatible = "isil,isl1208"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc>; + reg = <0x6f>; + interrupts-extended = <&gpio2 26 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_j10>; + pinctrl-1 = <&pinctrl_j28>; + + imx6dl-nit6xlite { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_bt_rfkill: bt_rfkillgrp { + fsl,pins = < + /* BT wake */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* BT reset */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x0b0b0 + /* BT reg en */ + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 + /* BT host wake irq */ + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x100b0 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + /* Phy reset */ + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x0f0b0 + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + /* Home Button: J14 pin 5 */ + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0 + /* Back Button: J14 pin 7 */ + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1 + /* Touch IRQ: J7 pin 4 */ + MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 + /* tcs2004 IRQ */ + MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b0 + /* tsc2004 reset */ + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x0b0b0 + >; + }; + + pinctrl_j10: j10grp { + fsl,pins = < + /* Broadcom WiFi module pins */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 + MX6QDL_PAD_NANDF_WP_B__GPIO6_IO09 0x0b0b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 + MX6QDL_PAD_SD1_CLK__OSC32K_32K_OUT 0x000b0 + >; + }; + + pinctrl_j28: j28grp { + fsl,pins = < + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + >; + }; + + pinctrl_leds: ledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x0b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x0b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x030b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x0b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0b0b0 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm3: pwm3grp { + fsl,pins = < + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm4: pwm4grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 + >; + }; + + pinctrl_wlan_vmmc: wlan_vmmcgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x030b0 + >; + }; + + pinctrl_rtc: rtcgrp { + fsl,pins = < + MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b0 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0 + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b0 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_KEY_COL4__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 + >; + }; + }; +}; + +&ldb { + status = "okay"; + + lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + port@4 { + reg = <4>; + + lvds0_out: endpoint { + remote-endpoint = <&panel_in_lvds0>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + status = "okay"; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm3>; + status = "okay"; +}; + +&pwm4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm4>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + non-removable; + vmmc-supply = <®_3p3v>; + vqmmc-supply = <®_wlan_vmmc>; + vqmmc-1-8-v; + ocr-limit = <0x180>; /* 1.65v - 2.1v */ + cap-power-off-card; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From baeeb541e653ba83a593f3f9b857c55e7bf6ba72 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 7 Oct 2015 16:58:35 -0700 Subject: ARM: dts: vf610twr: add NAND flash controller peripherial This adds the NAND flash controller (NFC) peripherial. The driver supports the SLC NAND chips found on Freescale's Vybrid Tower System Module. The Micron NAND chip on the module needs 4-bit ECC per 512 byte page. Use 24-bit ECC per 2k page, which is supported by the driver. Signed-off-by: Bill Pringlemeir Reviewed-by: Brian Norris Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf610-twr.dts | 47 +++++++++++++++++++++++++++++++++++++++++ arch/arm/boot/dts/vfxxx.dtsi | 11 ++++++++++ 2 files changed, 58 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 375ab23ca743..5438ee4be2ec 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -237,6 +237,33 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD31__NF_IO15 0x28df + VF610_PAD_PTD30__NF_IO14 0x28df + VF610_PAD_PTD29__NF_IO13 0x28df + VF610_PAD_PTD28__NF_IO12 0x28df + VF610_PAD_PTD27__NF_IO11 0x28df + VF610_PAD_PTD26__NF_IO10 0x28df + VF610_PAD_PTD25__NF_IO9 0x28df + VF610_PAD_PTD24__NF_IO8 0x28df + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1582 @@ -274,6 +301,26 @@ }; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <16>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <24>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index 6865137fd114..6736bae43a5b 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -564,6 +564,17 @@ status = "disabled"; }; + nfc: nand@400e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-nfc"; + reg = <0x400e0000 0x4000>; + interrupts = <83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_NFC>; + clock-names = "nfc"; + status = "disabled"; + }; + i2c2: i2c@400e6000 { #address-cells = <1>; #size-cells = <0>; -- cgit v1.2.3-70-g09d2 From 654252659ed97062a0973cd2bdd31a8cca655082 Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Wed, 7 Oct 2015 16:58:36 -0700 Subject: ARM: dts: vf-colibri: enable NAND flash controller Enable NAND access by adding pinmux and NAND flash controller node to device tree. The NAND chips currently used on the Colibri VF61 requires 8-bit ECC per 512 byte page, hence specify 32-bit ECC strength per 2k page size. Reviewed-by: Brian Norris Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo --- arch/arm/boot/dts/vf-colibri.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi index 68ca125b56ea..e5949b934945 100644 --- a/arch/arm/boot/dts/vf-colibri.dtsi +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -52,6 +52,26 @@ pinctrl-0 = <&pinctrl_i2c0>; }; +&nfc { + assigned-clocks = <&clks VF610_CLK_NFC>; + assigned-clock-rates = <33000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + status = "okay"; + + nand@0 { + compatible = "fsl,vf610-nfc-nandcs"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-ecc-strength = <32>; + nand-ecc-step-size = <2048>; + nand-on-flash-bbt; + }; +}; + &pwm0 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0>; @@ -156,6 +176,25 @@ >; }; + pinctrl_nfc: nfcgrp { + fsl,pins = < + VF610_PAD_PTD23__NF_IO7 0x28df + VF610_PAD_PTD22__NF_IO6 0x28df + VF610_PAD_PTD21__NF_IO5 0x28df + VF610_PAD_PTD20__NF_IO4 0x28df + VF610_PAD_PTD19__NF_IO3 0x28df + VF610_PAD_PTD18__NF_IO2 0x28df + VF610_PAD_PTD17__NF_IO1 0x28df + VF610_PAD_PTD16__NF_IO0 0x28df + VF610_PAD_PTB24__NF_WE_B 0x28c2 + VF610_PAD_PTB25__NF_CE0_B 0x28c2 + VF610_PAD_PTB27__NF_RE_B 0x28c2 + VF610_PAD_PTC26__NF_RB_B 0x283d + VF610_PAD_PTC27__NF_ALE 0x28c2 + VF610_PAD_PTC28__NF_CLE 0x28c2 + >; + }; + pinctrl_pwm0: pwm0grp { fsl,pins = < VF610_PAD_PTB0__FTM0_CH0 0x1182 -- cgit v1.2.3-70-g09d2 From 833f2cbf7091099baee28136dc68678e974c0ac5 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Sat, 10 Oct 2015 18:15:07 +0800 Subject: ARM: dts: imx6: change the core clock of spdif The correct core clock of spdif is SPDIF_GCLK, which is added to clock tree. So the dts also need to be updated. Signed-off-by: Shengjiu Wang Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl.dtsi | 12 ++++++------ arch/arm/boot/dts/imx6sl.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/imx6sx.dtsi | 2 +- 3 files changed, 23 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index e716e6f301c6..2b6cc8bf3c5c 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -218,16 +218,16 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>, - <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, - <&clks IMX6QDL_CLK_DUMMY>; + clocks = <&clks IMX6QDL_CLK_SPDIF_GCLK>, <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_ASRC>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_ESAI_EXTAL>, + <&clks IMX6QDL_CLK_IPG>, <&clks IMX6QDL_CLK_MLB>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_SPBA>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4", "rxtx5", "rxtx6", - "rxtx7"; + "rxtx7", "dma"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index ebe8670f3ae6..d8ba99f1d87b 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -135,8 +135,24 @@ ranges; spdif: spdif@02004000 { + compatible = "fsl,imx6sl-spdif", + "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SL_CLK_SPDIF_GCLK>, <&clks IMX6SL_CLK_OSC>, + <&clks IMX6SL_CLK_SPDIF>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_IPG>, <&clks IMX6SL_CLK_DUMMY>, + <&clks IMX6SL_CLK_DUMMY>, <&clks IMX6SL_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; }; ecspi1: ecspi@02008000 { diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index c94f2ea2316e..167f77b3bd43 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -211,7 +211,7 @@ dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks IMX6SX_CLK_SPDIF>, + clocks = <&clks IMX6SX_CLK_SPDIF_GCLK>, <&clks IMX6SX_CLK_OSC>, <&clks IMX6SX_CLK_SPDIF>, <&clks 0>, <&clks 0>, <&clks 0>, -- cgit v1.2.3-70-g09d2 From a452afa317e7017ae0e6f3ff443191f6eedc85e3 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Tue, 13 Oct 2015 13:43:55 +0200 Subject: ARM: dts: imx6: phyFLEX: fix typo in "pinctrl-names" Fix a typo, replacing "pinctrl-name" by "pinctrl-names" in the Phytec phyFLEX-i.MX6 Quad dtsi. Also fix a typo in the board name Signed-off-by: Michael Opdenacker Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index e81f38fb9424..d6d98d426384 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -12,7 +12,7 @@ #include / { - model = "Phytec phyFLEX-i.MX6 Ouad"; + model = "Phytec phyFLEX-i.MX6 Quad"; compatible = "phytec,imx6q-pfla02", "fsl,imx6q"; memory { @@ -373,7 +373,7 @@ }; &pcie { - pinctrl-name = "default"; + pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio4 17 0>; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 9a9214598aabdddbfbfd31fe167f97686d0b229c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Oct 2015 00:12:33 +0300 Subject: ARM: imx6sx-sdb: Fix typo in regulator enable GPIO property The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart Reviewed-by: Sascha Hauer Signed-off-by: Shawn Guo --- arch/arm/boot/dts/imx6sx-sdb.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi index ac88c3467078..94ac4005d9cd 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dtsi +++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi @@ -114,7 +114,7 @@ regulator-name = "peri_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + gpio = <&gpio4 16 GPIO_ACTIVE_HIGH>; enable-active-high; regulator-always-on; }; -- cgit v1.2.3-70-g09d2 From 607e266c47ef552b6f87c7cf0ba7f3c28ea5af14 Mon Sep 17 00:00:00 2001 From: Rajesh Bhagat Date: Wed, 14 Oct 2015 11:04:12 +0530 Subject: ARM: dts: ls1021a: Add quirk for Erratum A009116 Add "snps,quirk-frame-length-adjustment" property to USB3 node for erratum A009116. This property provides value of GFLADJ_30MHZ for post silicon frame length adjustment. Signed-off-by: Nikhil Badola Signed-off-by: Rajesh Bhagat Signed-off-by: Shawn Guo --- arch/arm/boot/dts/ls1021a.dtsi | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi index 2798058ea4e5..9430a9928199 100644 --- a/arch/arm/boot/dts/ls1021a.dtsi +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -537,6 +537,7 @@ reg = <0x0 0x3100000 0x0 0x10000>; interrupts = ; dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; }; }; }; -- cgit v1.2.3-70-g09d2 From 620f50332232b089815f7255f6a5fff0a8b10e63 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Mon, 12 Oct 2015 16:28:38 +0200 Subject: ARM: at91/dt: use syscon for PMC The PMC is not only used to drive the clocks but also has some registers related to other functions. One of those is for example the USB gadget bias. Using a syscon allows to properly separate those functions. Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91rm9200.dtsi | 2 +- arch/arm/boot/dts/at91sam9260.dtsi | 2 +- arch/arm/boot/dts/at91sam9261.dtsi | 2 +- arch/arm/boot/dts/at91sam9263.dtsi | 2 +- arch/arm/boot/dts/at91sam9g45.dtsi | 2 +- arch/arm/boot/dts/at91sam9n12.dtsi | 2 +- arch/arm/boot/dts/at91sam9rl.dtsi | 2 +- arch/arm/boot/dts/at91sam9x5.dtsi | 2 +- arch/arm/boot/dts/sama5d2.dtsi | 2 +- arch/arm/boot/dts/sama5d3.dtsi | 2 +- arch/arm/boot/dts/sama5d4.dtsi | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 60edd8baebb8..39eb1e3fc6b8 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index be9c027ddd97..d4884dd1c243 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -100,7 +100,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9260-pmc"; + compatible = "atmel,at91sam9260-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index ce1e3e94a40c..5e09de4eb9cd 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -568,7 +568,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index f1f5fa3a9e6e..93446420af25 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -93,7 +93,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91rm9200-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 18b8b9e29704..af8b708ac312 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -114,7 +114,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 32bc9a189db0..95569a87b6c9 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -97,7 +97,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9n12-pmc"; + compatible = "atmel,at91sam9n12-pmc", "syscon"; reg = <0xfffffc00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index a0b90aedd3b8..6d829db4e887 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -814,7 +814,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9g45-pmc"; + compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 9df8ca5666e9..0827d594b1f0 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -105,7 +105,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,at91sam9x5-pmc"; + compatible = "atmel,at91sam9x5-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 034cd48ae28b..780c8afc7600 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -286,7 +286,7 @@ }; pmc: pmc@f0014000 { - compatible = "atmel,sama5d2-pmc"; + compatible = "atmel,sama5d2-pmc", "syscon"; reg = <0xf0014000 0x160>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index 1832736201ff..a53279160f98 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -907,7 +907,7 @@ }; pmc: pmc@fffffc00 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xfffffc00 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 9760a7549f90..4e67a2751324 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -386,7 +386,7 @@ }; pmc: pmc@f0018000 { - compatible = "atmel,sama5d3-pmc"; + compatible = "atmel,sama5d3-pmc", "syscon"; reg = <0xf0018000 0x120>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; interrupt-controller; -- cgit v1.2.3-70-g09d2 From 0db090d5428e53c6b939c65e9fdc01619137d529 Mon Sep 17 00:00:00 2001 From: Michael Opdenacker Date: Tue, 13 Oct 2015 13:24:24 +0200 Subject: ARM: at91/dt: fix "disabled" property on at91rm9200 Fix instances of "disable" instead of "disabled" in the at91rm9200 dtsi. Signed-off-by: Michael Opdenacker Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91rm9200.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 39eb1e3fc6b8..f6cb7a80a2f5 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -426,7 +426,7 @@ pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&ssc0_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffd4000 { @@ -437,7 +437,7 @@ pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&ssc1_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; ssc2: ssc@fffd8000 { @@ -448,7 +448,7 @@ pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; clocks = <&ssc2_clk>; clock-names = "pclk"; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { -- cgit v1.2.3-70-g09d2 From 143877e68107e38d19555657c2ec528597ffb70c Mon Sep 17 00:00:00 2001 From: Wenyou Yang Date: Wed, 14 Oct 2015 10:59:56 +0800 Subject: ARM: at91/dt: sama5d2_xplained: add regulator nodes Add regulator nodes of PMIC ACT8945A chip on the board. Signed-off-by: Wenyou Yang Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/at91-sama5d2_xplained.dts | 57 +++++++++++++++++++++++++++++ 1 file changed, 57 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts index dc2397901c1b..e07c2b206beb 100644 --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts @@ -122,6 +122,63 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0_default>; status = "okay"; + + pmic: act8865@5b { + compatible = "active-semi,act8865"; + reg = <0x5b>; + active-semi,vsel-high; + status = "okay"; + + regulators { + vdd_1v35_reg: DCDC_REG1 { + regulator-name = "VDD_1V35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vdd_1v2_reg: DCDC_REG2 { + regulator-name = "VDD_1V2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vdd_3v3_reg: DCDC_REG3 { + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_fuse_reg: LDO_REG1 { + regulator-name = "VDD_FUSE"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vdd_3v3_lp_reg: LDO_REG2 { + regulator-name = "VDD_3V3_LP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_led_reg: LDO_REG3 { + regulator-name = "VDD_LED"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_sdhc_1v8_reg: LDO_REG4 { + regulator-name = "VDD_SDHC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; }; uart3: serial@fc008000 { -- cgit v1.2.3-70-g09d2 From 7c512d551eac34767cafcd2177b5b69e13c87f54 Mon Sep 17 00:00:00 2001 From: Sylvain Rochet Date: Mon, 7 Sep 2015 17:47:58 +0200 Subject: ARM: at91/dt: add pullup on mmc2 data signals MMC data lines may be left floating if nothing is currently driving the data lines, which is the case when mmc is in idle state, thus consuming a useless extra amount of power. Add pullup on mmc2 data signals in the same way it was previously done for mmc0 and mmc1. Signed-off-by: Sylvain Rochet Acked-by: Nicolas Ferre Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d3_mci2.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi index 026b252f09b3..e21099a1aef9 100644 --- a/arch/arm/boot/dts/sama5d3_mci2.dtsi +++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi @@ -24,9 +24,9 @@ }; pinctrl_mmc2_dat1_3: mmc2_dat1_3 { atmel,pins = - ; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ + ; /* PC14 periph A MCI2_DA3 with pullup, conflicts with TCLK1 */ }; }; }; -- cgit v1.2.3-70-g09d2 From 236be662979f74d510ed70e069a3683906fe13df Mon Sep 17 00:00:00 2001 From: Gregory CLEMENT Date: Fri, 16 Oct 2015 14:21:34 +0200 Subject: ARM: at91/dt: sama5d4: add the macb1 node The second macb is present on all the sama5d4 SoCs. Let's add a node reflecting it in the device tree. Signed-off-by: Gregory CLEMENT Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d4.dtsi | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi index 4e67a2751324..15bbaf690047 100644 --- a/arch/arm/boot/dts/sama5d4.dtsi +++ b/arch/arm/boot/dts/sama5d4.dtsi @@ -1189,6 +1189,19 @@ clock-names = "t0_clk", "slow_clk"; }; + macb1: ethernet@fc028000 { + compatible = "atmel,sama5d4-gem"; + reg = <0xfc028000 0x100>; + interrupts = <55 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb1_rmii>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&macb1_clk>, <&macb1_clk>; + clock-names = "hclk", "pclk"; + status = "disabled"; + }; + adc0: adc@fc034000 { compatible = "atmel,at91sam9x5-adc"; reg = <0xfc034000 0x100>; @@ -1635,6 +1648,23 @@ }; }; + macb1 { + pinctrl_macb1_rmii: macb1_rmii-0 { + atmel,pins = + ; + }; + }; + mmc0 { pinctrl_mmc0_clk_cmd_dat0: mmc0_clk_cmd_dat0 { atmel,pins = -- cgit v1.2.3-70-g09d2 From 96577bcdf4868605325485d27d89726a30450e5c Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Sun, 18 Oct 2015 00:04:09 +0800 Subject: ARM: dts: sun6i: Add support for Sinlinx A31s SDK board The Sinlinx A31s SDK is a A31s based module/baseboard development kit. The core module has the SoC, PMIC, DRAM, eMMC and supporting components. There are also pads for UART0, JTAG and I2S. The baseboard has 100 Mbps Ethernet, 5x USB 2.0 host ports via a USB 2.0 hub chip, MMC, HDMI, SPDIF, CIR, audio jacks, 2 tablet-like volume buttons, RS232 style UART and USB OTG (though VBUS is not connected). Various headers are available for other addon modules, such as SDIO WiFi, LCD display, camera sensor, UARTs, I2C, SPI and GPIOs. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 140 ++++++++++++++++++++++ arch/arm/boot/dts/sun6i-a31s-sina31s.dts | 153 +++++++++++++++++++++++++ 3 files changed, 294 insertions(+) create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi create mode 100644 arch/arm/boot/dts/sun6i-a31s-sina31s.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 2eaa45b387c2..35a3cf4b95f7 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -611,6 +611,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-cs908.dtb \ + sun6i-a31s-sina31s.dtb \ sun6i-a31s-sinovoip-bpi-m2.dtb \ sun6i-a31s-yones-toptech-bs1078-v2.dtb dtb-$(CONFIG_MACH_SUN7I) += \ diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi new file mode 100644 index 000000000000..ea69fb8ad4d8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include + +/ { + model = "Sinlinx SinA31s Core Board"; + compatible = "sinlinx,sina31s", "allwinner,sun6i-a31s"; + + aliases { + serial0 = &uart0; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +/* eMMC on core board */ +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_emmc_pins>; + vmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +/* AXP221s PMIC on core board */ +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* UART0 pads available on core board */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s.dts b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts new file mode 100644 index 000000000000..6ead2f5c847a --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-sina31s.dts @@ -0,0 +1,153 @@ +/* + * Copyright 2015 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* The SinA31s development board has the SinA31s core board soldered on */ +#include "sun6i-a31s-sina31s-core.dtsi" + +#include + +/ { + model = "Sinlinx SinA31s Development Board"; + compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pin_sina31s>; + + status { + label = "sina31s:status:usr"; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */ + }; + }; +}; + +&ehci0 { + /* USB 2.0 4 port hub IC */ + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + phy-supply = <®_dldo1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ + cd-inverted; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + led_pin_sina31s: led_pin@0 { + allwinner,pins = "PH13"; + allwinner,function = "gpio_out"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_sina31s: mmc0_cd_pin@0 { + allwinner,pins = "PA4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-gmac-phy"; +}; + +&usbphy { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From f5bad43b53cbcd1a017c6df3d1bf2c6412a465bd Mon Sep 17 00:00:00 2001 From: Adam Sampson Date: Sat, 17 Oct 2015 23:08:29 +0100 Subject: ARM: dts: sun7i: Enable USB DRC on pcDuino v3 Nano The OTG arrangement on the LinkSprite pcDuino v3 Nano is the same as the pcDuino 1/2/3: the OTG port's 5V line is connected directly to the 5V bus (it's not switchable), and the OTG port's ID pin is connected to PH4 on the A20. Tested successfully in both host and device modes. Signed-off-by: Adam Sampson Acked-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts index beac431aa594..1757a6ad74e9 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3-nano.dts @@ -142,6 +142,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_pcduino3_nano: ahci_pwr_pin@0 { allwinner,pins = "PH2"; @@ -157,6 +161,13 @@ allwinner,pull = ; }; + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + usb1_vbus_pin_pcduino3_nano: usb1_vbus_pin@0 { allwinner,pins = "PD2"; allwinner,function = "gpio_out"; @@ -211,7 +222,15 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb1_vbus>; status = "okay"; -- cgit v1.2.3-70-g09d2 From 512fc048e4fdc39f43e78af7e2fed5047d651979 Mon Sep 17 00:00:00 2001 From: Ludovic Desroches Date: Fri, 16 Oct 2015 15:04:44 +0200 Subject: ARM: at91/dt: sama5d2: add missing devices Big update of the sama5d2.dtsi file since many patches have reached te mainline: - add generated clocks - enable crypto devices - add flexcom devices - add tdes device - add sdmmc devices Signed-off-by: Ludovic Desroches Signed-off-by: Nicolas Ferre Signed-off-by: Cyrille Pitchen Signed-off-by: Alexandre Belloni --- arch/arm/boot/dts/sama5d2.dtsi | 152 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 150 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 780c8afc7600..c1f0cba40289 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -263,6 +263,24 @@ cache-level = <2>; }; + sdmmc0: sdio-host@a0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xa0000000 0x300>; + interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + + sdmmc1: sdio-host@b0000000 { + compatible = "atmel,sama5d2-sdhci"; + reg = <0xb0000000 0x300>; + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>; + clock-names = "hclock", "multclk", "baseclk"; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -619,6 +637,18 @@ atmel,clk-output-range = <0 83000000>; }; + i2s0_clk: i2s0_clk { + #clock-cells = <0>; + reg = <54>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s1_clk: i2s1_clk { + #clock-cells = <0>; + reg = <55>; + atmel,clk-output-range = <0 83000000>; + }; + classd_clk: classd_clk { #clock-cells = <0>; reg = <59>; @@ -697,6 +727,52 @@ reg = <53>; }; }; + + gck { + compatible = "atmel,sama5d2-clk-generated"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + sdmmc0_gclk: sdmmc0_gclk { + #clock-cells = <0>; + reg = <31>; + }; + + sdmmc1_gclk: sdmmc1_gclk { + #clock-cells = <0>; + reg = <32>; + }; + + tcb0_gclk: tcb0_gclk { + #clock-cells = <0>; + reg = <35>; + atmel,clk-output-range = <0 83000000>; + }; + + tcb1_gclk: tcb1_gclk { + #clock-cells = <0>; + reg = <36>; + atmel,clk-output-range = <0 83000000>; + }; + + pwm_gclk: pwm_gclk { + #clock-cells = <0>; + reg = <38>; + atmel,clk-output-range = <0 83000000>; + }; + + i2s0_gclk: i2s0_gclk { + #clock-cells = <0>; + reg = <54>; + }; + + i2s1_gclk: i2s1_gclk { + #clock-cells = <0>; + reg = <55>; + }; + }; }; sha@f0028000 { @@ -709,7 +785,7 @@ dma-names = "tx"; clocks = <&sha_clk>; clock-names = "sha_clk"; - status = "disabled"; + status = "okay"; }; aes@f002c000 { @@ -725,7 +801,7 @@ dma-names = "tx", "rx"; clocks = <&aes_clk>; clock-names = "aes_clk"; - status = "disabled"; + status = "okay"; }; spi0: spi@f8000000 { @@ -820,6 +896,32 @@ status = "disabled"; }; + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + status = "disabled"; + }; + + flx1: flexcom@f8038000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8038000 0x200>; + clocks = <&flx1_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8038000 0x800>; + status = "disabled"; + }; + + rstc@f8048000 { + compatible = "atmel,sama5d3-rstc"; + reg = <0xf8048000 0x10>; + clocks = <&clk32k>; + }; + pit: timer@f8048030 { compatible = "atmel,at91sam9260-pit"; reg = <0xf8048030 0x10>; @@ -897,6 +999,36 @@ status = "disabled"; }; + flx2: flexcom@fc010000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc010000 0x200>; + clocks = <&flx2_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc010000 0x800>; + status = "disabled"; + }; + + flx3: flexcom@fc014000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc014000 0x200>; + clocks = <&flx3_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc014000 0x800>; + status = "disabled"; + }; + + flx4: flexcom@fc018000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xfc018000 0x200>; + clocks = <&flx4_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xfc018000 0x800>; + status = "disabled"; + }; + aic: interrupt-controller@fc020000 { #interrupt-cells = <3>; compatible = "atmel,sama5d2-aic"; @@ -921,6 +1053,22 @@ clocks = <&twi1_clk>; status = "disabled"; }; + + tdes@fc044000 { + compatible = "atmel,at91sam9g46-tdes"; + reg = <0xfc044000 0x100>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(28))>, + <&dma0 + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(29))>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; + status = "okay"; + }; }; }; }; -- cgit v1.2.3-70-g09d2 From 481b4f1a3f64c529333186a9e94eab41b271e3d8 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 24 Sep 2015 10:00:05 +0200 Subject: ARM: tegra: Use consistent indentation for SATA node The indentation for properties in the SATA device tree node on Tegra124 deviates from the rest of the device tree file. Restore consistency and get rid of a couple of gratuitous blank lines while at it. Signed-off-by: Thierry Reding --- arch/arm/boot/dts/tegra124.dtsi | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index a5c878edd44e..8aa6e96b5b5c 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -608,26 +608,20 @@ sata@0,70020000 { compatible = "nvidia,tegra124-ahci"; - reg = <0x0 0x70027000 0x0 0x2000>, /* AHCI */ - <0x0 0x70020000 0x0 0x7000>; /* SATA */ - + <0x0 0x70020000 0x0 0x7000>; /* SATA */ interrupts = ; - clocks = <&tegra_car TEGRA124_CLK_SATA>, - <&tegra_car TEGRA124_CLK_SATA_OOB>, - <&tegra_car TEGRA124_CLK_CML1>, - <&tegra_car TEGRA124_CLK_PLL_E>; + <&tegra_car TEGRA124_CLK_SATA_OOB>, + <&tegra_car TEGRA124_CLK_CML1>, + <&tegra_car TEGRA124_CLK_PLL_E>; clock-names = "sata", "sata-oob", "cml1", "pll_e"; - resets = <&tegra_car 124>, - <&tegra_car 123>, - <&tegra_car 129>; + <&tegra_car 123>, + <&tegra_car 129>; reset-names = "sata", "sata-oob", "sata-cold"; - phys = <&padctl TEGRA_XUSB_PADCTL_SATA>; phy-names = "sata-phy"; - status = "disabled"; }; -- cgit v1.2.3-70-g09d2 From 36958598b7acf690b514141122234b1c3b8e4282 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 21 Sep 2015 20:23:51 +0530 Subject: ARM: dts: dra72-evm: remove cpsw gpio hogging and add mode-gpios With the current implementation of GPIO hogging and with gpio-pcf857x is built as module, ethernet doesn't work on boot and doesn't throw any error/warning to user. Ethernet becomes operational when inserting gpio-pcf857x module, even this time there is no error/warning logs to user that ethernet is operational. When using with NFS rootfs and gpio-pcf857x as module, board doesn't boot as it doesn't get any ip address and doesn't throw any error/warning. To over come this, now cpsw driver tries to get mode-gpios. When gpio-pcf857x is built as module it will throw error, so that user can decide either to built in gpio-pcf857x to continue with nfs boot or choose alternate rootfs filesystem like sd/ramdisk. When using mmc/ramdisk as root fs, cpsw will probe defer and re-probes again when gpio-pcf857x module is inserted and ethernet becomes operational. Signed-off-by: Mugunthan V N Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/dra72-evm.dts | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 27e414295acc..d6104d5f0c01 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -429,12 +429,6 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; - - cpsw_sel_s0 { - gpio-hog; - gpios = <4 GPIO_ACTIVE_HIGH>; - output-low; - }; }; tlv320aic3106: tlv320aic3106@19 { @@ -689,6 +683,7 @@ pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; slaves = <1>; + mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>; }; &cpsw_emac0 { -- cgit v1.2.3-70-g09d2 From 56a31e549e007ad7ca623d99294af0eca8517bf8 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Wed, 14 Oct 2015 12:00:30 +0200 Subject: ARM: dts: Update Javier Martinez Canillas's email I see that people are still sending emails to my old address (that no longer exists) since is the one mentioned in the IGEP DTS. Replace it with my current email address to avoid this. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep.dtsi | 2 +- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 2 +- arch/arm/boot/dts/omap3-igep0020-rev-f.dts | 2 +- arch/arm/boot/dts/omap3-igep0020.dts | 2 +- arch/arm/boot/dts/omap3-igep0030-common.dtsi | 2 +- arch/arm/boot/dts/omap3-igep0030-rev-g.dts | 2 +- arch/arm/boot/dts/omap3-igep0030.dts | 2 +- 7 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi index 09a438ebfbbe..3caf062f882c 100644 --- a/arch/arm/boot/dts/omap3-igep.dtsi +++ b/arch/arm/boot/dts/omap3-igep.dtsi @@ -1,7 +1,7 @@ /* * Common device tree for IGEP boards based on AM/DM37x * - * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 5ad688c57a00..441999817285 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEPv2 * - * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Javier Martinez Canillas * Copyright (C) 2014 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts index 72f7cdc091fb..321c2b7a4e9f 100644 --- a/arch/arm/boot/dts/omap3-igep0020-rev-f.dts +++ b/arch/arm/boot/dts/omap3-igep0020-rev-f.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts index 5683b8bf3475..3835e1569c29 100644 --- a/arch/arm/boot/dts/omap3-igep0020.dts +++ b/arch/arm/boot/dts/omap3-igep0020.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030-common.dtsi b/arch/arm/boot/dts/omap3-igep0030-common.dtsi index 0cb1527c39d4..640f06603966 100644 --- a/arch/arm/boot/dts/omap3-igep0030-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0030-common.dtsi @@ -1,7 +1,7 @@ /* * Common Device Tree Source for IGEP COM MODULE * - * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Javier Martinez Canillas * Copyright (C) 2014 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts index b899e341874a..76dc08868bfb 100644 --- a/arch/arm/boot/dts/omap3-igep0030-rev-g.dts +++ b/arch/arm/boot/dts/omap3-igep0030-rev-g.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x) * - * Copyright (C) 2014 Javier Martinez Canillas + * Copyright (C) 2014 Javier Martinez Canillas * Copyright (C) 2014 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts index 8150f47ccdf5..468608dab30a 100644 --- a/arch/arm/boot/dts/omap3-igep0030.dts +++ b/arch/arm/boot/dts/omap3-igep0030.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x) * - * Copyright (C) 2012 Javier Martinez Canillas + * Copyright (C) 2012 Javier Martinez Canillas * Copyright (C) 2012 Enric Balletbo i Serra * * This program is free software; you can redistribute it and/or modify -- cgit v1.2.3-70-g09d2 From f513d22c9cb09ff95a0c2d26e18940fbda50d6db Mon Sep 17 00:00:00 2001 From: Vignesh R Date: Wed, 14 Oct 2015 19:24:25 +0530 Subject: ARM: dts: am437x-gp-evm: Add wakeup interrupt source for pixcir_i2c_ts On am437x-gp-evm, pixcir_i2c_ts can wakeup the system from low power state via pinctrl and IO daisy chain using generic wakeirq framework. With commit 3fffd1283927 ("i2c: allow specifying separate wakeup interrupt in device tree") i2c core allows optional wakeirq to be specified via device tree. Add wakeup irq entry to enable pixcir_i2c_ts to wake the system from low power state. Signed-off-by: Vignesh R Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am437x-gp-evm.dts | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index b259d7c29bcd..d2450ab0a380 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -595,8 +595,17 @@ attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + /* + * 0x264 represents the offset of padconf register of + * gpio3_22 from am43xx_pinmux base. + */ + interrupts-extended = <&gpio3 22 IRQ_TYPE_NONE>, + <&am43xx_pinmux 0x264>; + interrupt-names = "tsc", "wakeup"; + touchscreen-size-x = <1024>; touchscreen-size-y = <600>; + wakeup-source; }; ov2659@30 { -- cgit v1.2.3-70-g09d2 From fd20719443e420d09e2813d7c7b582e229f3cbdc Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 19 Oct 2015 17:34:19 +0200 Subject: ARM: dts: omap3-igep0020: Use IOPAD pinmux macro Use the OMAP3 pinmux IOPAD macro to define the physical address instead of the offset from the padconf address. It makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap3-igep0020-common.dtsi | 58 ++++++++++++++-------------- 1 file changed, 29 insertions(+), 29 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi index 441999817285..d90f12c39307 100644 --- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi +++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi @@ -111,40 +111,40 @@ tfp410_pins: pinmux_tfp410_pins { pinctrl-single,pins = < - 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ + OMAP3_CORE1_IOPAD(0x21c6, PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */ >; }; dss_dpi_pins: pinmux_dss_dpi_pins { pinctrl-single,pins = < - 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ - 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ - 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ - 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ - 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ - 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ - 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ - 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ - 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ - 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ - 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ - 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ - 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ - 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ - 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ - 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ - 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ - 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ - 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ - 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ - 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ - 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ - 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ - 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ - 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ - 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ - 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ - 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ + OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */ + OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */ + OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */ + OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */ + OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */ + OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */ + OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */ + OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */ + OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */ + OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */ + OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */ + OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */ + OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */ + OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */ + OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */ + OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */ + OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */ + OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */ + OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */ + OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */ + OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */ + OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */ + OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */ + OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */ + OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */ + OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */ + OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */ + OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */ >; }; -- cgit v1.2.3-70-g09d2 From 8a3ecb217f11884890d81c9440087c0765606daf Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 19 Oct 2015 17:34:20 +0200 Subject: ARM: dts: am335x-igep0033: Use IOPAD pinmux macro Use the AM33xx pinmux IOPAD macro to define the physical address instead of the offset from the padconf address. It makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-igep0033.dtsi | 40 +++++++++++++++++----------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi index c0e1135256cc..54f113546ecc 100644 --- a/arch/arm/boot/dts/am335x-igep0033.dtsi +++ b/arch/arm/boot/dts/am335x-igep0033.dtsi @@ -56,41 +56,41 @@ &am33xx_pinmux { i2c0_pins: pinmux_i2c0_pins { pinctrl-single,pins = < - 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ - 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ >; }; nandflash_pins: pinmux_nandflash_pins { pinctrl-single,pins = < - 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ - 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ - 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ - 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ - 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ - 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ - 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ - 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ - 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ - 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ - 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ - 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ - 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ - 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ - 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + AM33XX_IOPAD(0x874, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + AM33XX_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + AM33XX_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + AM33XX_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + AM33XX_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ >; }; uart0_pins: pinmux_uart0_pins { pinctrl-single,pins = < - 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ - 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ >; }; leds_pins: pinmux_leds_pins { pinctrl-single,pins = < - 0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ + AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */ >; }; }; -- cgit v1.2.3-70-g09d2 From e9a267702d32fc8e71abe5f172d2924bad86e52f Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Mon, 19 Oct 2015 17:34:21 +0200 Subject: ARM: dts: am335x-base0033: Use IOPAD pinmux macro Use the AM33XX pinmux IOPAD macro to define the physical address instead of the offset from the padconf address. It makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/am335x-base0033.dts | 48 +++++++++++++++++------------------ 1 file changed, 24 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts index 72a9b3fc4251..58a05f7d0b7c 100644 --- a/arch/arm/boot/dts/am335x-base0033.dts +++ b/arch/arm/boot/dts/am335x-base0033.dts @@ -46,39 +46,39 @@ &am33xx_pinmux { nxp_hdmi_pins: pinmux_nxp_hdmi_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ - 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ - 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ - 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ - 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ - 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ - 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ - 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ - 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ - 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ - 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ - 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ - 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ - 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ - 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ - 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ - 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ - 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ - 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ - 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ - 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0 */ + AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1 */ + AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2 */ + AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3 */ + AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4 */ + AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5 */ + AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6 */ + AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7 */ + AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8 */ + AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9 */ + AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10 */ + AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11 */ + AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12 */ + AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13 */ + AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14 */ + AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15 */ + AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync */ + AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync */ + AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk */ + AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en */ >; }; nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins { pinctrl-single,pins = < - 0x1b0 (PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ + AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE3) /* xdma_event_intr0.clkout1 */ >; }; leds_base_pins: pinmux_leds_base_pins { pinctrl-single,pins = < - 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ - 0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ + AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + AM33XX_IOPAD(0x888, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.gpio2_0 */ >; }; }; -- cgit v1.2.3-70-g09d2 From 6ee93e127f52d041342b30c8db485b41abcd5bdd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:21:49 +0200 Subject: ARM: sun4i: Add audio PLL The A10 uses the PLL2 as the audio PLL, which is the parent of all the other audio clocks in the system (i2s, codec, etc.). Add it to the DTSI. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 1f3c51a08113..c8595926a721 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -195,6 +195,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; -- cgit v1.2.3-70-g09d2 From 6f87abb8cd7dc00701f0a732962420fddbf4b79b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:21:49 +0200 Subject: ARM: sun5i: Add audio PLL The A13 uses the PLL2 as the audio PLL, which is the parent of all the other audio clocks in the system (i2s, codec, etc.). However, it has a different divider configuration than the A10, hence the difference compatible. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 9ffee9bb70a7..9b03eb95a390 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -102,6 +102,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun5i-a13-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; -- cgit v1.2.3-70-g09d2 From 88a86aaa613032e0d5cf70a3d0777302ec2ed40b Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:21:49 +0200 Subject: ARM: sun7i: Add audio PLL The A20 uses the PLL2 as the audio PLL, which is the parent of all the other audio clocks in the system (i2s, codec, etc.). Add it to the DTSI. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 3a68852f6706..433ec1415e56 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -199,6 +199,15 @@ clock-output-names = "pll1"; }; + pll2: clk@01c20008 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-a10-pll2-clk"; + reg = <0x01c20008 0x8>; + clocks = <&osc24M>; + clock-output-names = "pll2-1x", "pll2-2x", + "pll2-4x", "pll2-8x"; + }; + pll4: clk@01c20018 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-pll4-clk"; -- cgit v1.2.3-70-g09d2 From b516fa5def5975261bffe4f50169234ad6fad8db Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:28:46 +0200 Subject: ARM: sun4i: Add audio codec clock The audio codec functional clock is a child of PLL2 and is used to control the audio rate, enable it in the DT. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun4i-a10.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index c8595926a721..8993dfadd18c 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -45,6 +45,7 @@ #include +#include #include #include @@ -490,6 +491,14 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; clock-output-names = "spi3"; }; + + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; }; soc@01c00000 { -- cgit v1.2.3-70-g09d2 From ca72f0223760d7f14f092ca65dfccca74fc37c1c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:28:46 +0200 Subject: ARM: sun5i: Add audio codec clock The audio codec functional clock is a child of PLL2 and is used to control the audio rate, enable it in the DT. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 9b03eb95a390..17a6b7d58fbf 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -44,6 +44,7 @@ #include "skeleton.dtsi" +#include #include #include @@ -294,6 +295,14 @@ clock-output-names = "usb_ohci0", "usb_phy"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; -- cgit v1.2.3-70-g09d2 From dbe4dd1e617a24b609b92c1551702a73c88858aa Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 12 Oct 2015 22:28:46 +0200 Subject: ARM: sun7i: Add audio codec clock The audio codec functional clock is a child of PLL2 and is used to control the audio rate, enable it in the DT. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20.dtsi | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 433ec1415e56..f4440f6d9621 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -47,6 +47,7 @@ #include #include +#include #include #include @@ -500,6 +501,14 @@ clock-output-names = "spi3"; }; + codec_clk: clk@01c20140 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-codec-clk"; + reg = <0x01c20140 0x4>; + clocks = <&pll2 SUN4I_A10_PLL2_1X>; + clock-output-names = "codec"; + }; + mbus_clk: clk@01c2015c { #clock-cells = <0>; compatible = "allwinner,sun5i-a13-mbus-clk"; -- cgit v1.2.3-70-g09d2 From bcf884504bac05df5e47766142eed304fa3ad953 Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Tue, 22 Jul 2014 13:06:48 +0200 Subject: ARM: sun4i: Add sunxi codec device node The A10 SoC includes the Allwinner audio codec, capable of both 24-bit playback and capture. This commit adds a device node for it. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun4i-a10.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 8993dfadd18c..aa90f319309b 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -1022,6 +1022,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; -- cgit v1.2.3-70-g09d2 From 44cdcfc2d91041df422ffa6713c1066c12257ccd Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Mon, 27 Jul 2015 16:50:21 +0200 Subject: ARM: sun5i: Add the Audio codec DT node The A13 and A10s also have the audio codec present. List it in the device tree. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi index 17a6b7d58fbf..59a9426e3bd4 100644 --- a/arch/arm/boot/dts/sun5i.dtsi +++ b/arch/arm/boot/dts/sun5i.dtsi @@ -589,6 +589,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun4i-a10-codec"; + reg = <0x01c22c00 0x40>; + interrupts = <30>; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; -- cgit v1.2.3-70-g09d2 From d5ce107a2f6198de84ff796e2657de9b67e67bf2 Mon Sep 17 00:00:00 2001 From: Emilio López Date: Mon, 18 Aug 2014 01:07:55 -0300 Subject: ARM: sun7i: Add sunxi codec device node MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The A20 SoC includes the Allwinner audio codec, capable of both 24-bit playback and capture. This commit adds a device node for it. Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index f4440f6d9621..e02eb720c4fc 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -1216,6 +1216,19 @@ status = "disabled"; }; + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun7i-a20-codec"; + reg = <0x01c22c00 0x40>; + interrupts = ; + clocks = <&apb0_gates 0>, <&codec_clk>; + clock-names = "apb", "codec"; + dmas = <&dma SUN4I_DMA_NORMAL 19>, + <&dma SUN4I_DMA_NORMAL 19>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; -- cgit v1.2.3-70-g09d2 From faef4af445b030f148463a60a1efc62997ed49b4 Mon Sep 17 00:00:00 2001 From: Emilio López Date: Mon, 18 Aug 2014 01:10:05 -0300 Subject: ARM: sun7i: dt: enable audio codec on Cubietruck MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit enables the on-chip audio codec present on the A20 SoC for the Cubietruck. Signed-off-by: Emilio López Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index e6b019232a9e..8da939ab8350 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -101,6 +101,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; -- cgit v1.2.3-70-g09d2 From 4d6b0f8e8638357b8c350f9c50ca5b742093be07 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Fri, 1 May 2015 22:39:45 +0200 Subject: ARM: sun7i: Enable cubieboard2 audio codec The cubieboard2 uses the internal codec to output sound to its mini-jack. Enable it. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 9ff459bd38b3..1fa832d7b469 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -84,6 +84,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; -- cgit v1.2.3-70-g09d2 From bc8362e6ec63d870cd51df7479f7e923e30c2c2a Mon Sep 17 00:00:00 2001 From: Marcus Cooper Date: Wed, 10 Jun 2015 16:31:01 +0200 Subject: ARM: sun4i: Enable audio-codec on Mele A1000 Enable the audio-codec on the Mele A1000 top-set box. Signed-off-by: Marcus Cooper Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun4i-a10-a1000.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 2630d78d9e04..97570cb7f2fc 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -93,6 +93,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From e54693ed82ae0fee934a21328536751afd293c80 Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Tue, 28 Jul 2015 10:37:01 +0200 Subject: ARM: sun5i: chip: Enable the audio codec The CHIP v0.2 has a composite output on a mini-jack connector, the audio part being provided by the on-SoC codec. Enable it. Signed-off-by: Maxime Ripard Acked-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun5i-r8-chip.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun5i-r8-chip.dts b/arch/arm/boot/dts/sun5i-r8-chip.dts index abf3ccb1a82c..530ab28e9ca2 100644 --- a/arch/arm/boot/dts/sun5i-r8-chip.dts +++ b/arch/arm/boot/dts/sun5i-r8-chip.dts @@ -66,6 +66,10 @@ }; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 39efe82a0275ea1dbef72d3be567ff8da826f1cd Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Thu, 22 Oct 2015 12:30:26 +0800 Subject: ARM: sun4i: Enable cubieboard audio codec The cubieboard uses the internal codec to output sound to its mini-jack. Enable it. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 046a84d9719d..710e2ef516a8 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -83,6 +83,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &cpu0 { cpu-supply = <®_dcdc2>; }; -- cgit v1.2.3-70-g09d2 From 336263770f8e0bc386491757c656e370ef442ef9 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 21 Oct 2015 00:04:29 +0200 Subject: ARM: dts: sun4i: Add dts file for the pov protab2-ips9 tablet The Point of View protab2-ips9 is a tablet with a 9" ips 1024x768 lcd screen, microsd slot, headphones, mini hdmi, mini usb b and power barrel connectors. It uses a rtl8188cus usb wifi chip and a RDA 5875Y bluetooth chip attached to uart2. It has a bma250 accelerometer attached to i2c1 addr 0x18, this only works when ldo3 is set to 2.8 volt, otherwise i2c1 gets stuck, so for now we mark i2c1 as failed. It has a pixcir,pixcir_tangoc compatible touchscreen attached to i2c2 addr 0x5c. This is not enabled in this dts, because this variant of the pixcir_tangoc has separate wakeup and enable pins both of which need to be driven low before the touchscreen will work. Before we can enable this the pixcir driver and devicetree-bindings need to be extended to support these pins. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts | 199 +++++++++++++++++++++++ 2 files changed, 201 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 35a3cf4b95f7..c00b72e750ab 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -588,7 +588,8 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-mk802ii.dtb \ sun4i-a10-olinuxino-lime.dtb \ sun4i-a10-pcduino.dtb \ - sun4i-a10-pcduino2.dtb + sun4i-a10-pcduino2.dtb \ + sun4i-a10-pov-protab2-ips9.dtb dtb-$(CONFIG_MACH_SUN5I) += \ sun5i-a10s-auxtek-t003.dtb \ sun5i-a10s-auxtek-t004.dtb \ diff --git a/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts new file mode 100644 index 000000000000..82e69c3820a2 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-pov-protab2-ips9.dts @@ -0,0 +1,199 @@ +/* + * Copyright 2015 Hans de Goede + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun4i-a10.dtsi" +#include "sunxi-common-regulators.dtsi" +#include +#include +#include +#include + +/ { + model = "Point of View Protab2-IPS9"; + compatible = "pov,protab2-ips9", "allwinner,sun4i-a10"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&ehci0 { + status = "okay"; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + reg = <0x34>; + interrupts = <0>; + }; +}; + +#include "axp209.dtsi" + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + /* pull-ups and devices require AXP209 LDO3 */ + status = "failed"; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; +}; + +&lradc { + vref-supply = <®_ldo2>; + status = "okay"; + + button@400 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <400000>; + }; + + button@800 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <800000>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ + cd-inverted; + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo1 { + regulator-name = "vdd-rtc"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 6536d910ef17d81597bb8b32adde21ce5ba08bbb Mon Sep 17 00:00:00 2001 From: Aleksei Mamlin Date: Thu, 22 Oct 2015 13:38:56 +0300 Subject: ARM: dts: sun4i: Enable audio codec on Marsboard A10. Enable on-chip audio codec on the Marsboard A10. Signed-off-by: Aleksei Mamlin Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun4i-a10-marsboard.dts | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/arch/arm/boot/dts/sun4i-a10-marsboard.dts index 9a012db79963..8e50723dbe02 100644 --- a/arch/arm/boot/dts/sun4i-a10-marsboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-marsboard.dts @@ -91,6 +91,10 @@ status = "okay"; }; +&codec { + status = "okay"; +}; + &ehci0 { status = "okay"; }; -- cgit v1.2.3-70-g09d2 From c0949308dd47d74b6525ef4bae638869c0a58754 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Fri, 23 Oct 2015 11:50:40 +0800 Subject: ARM: dts: sun6i: Add simplefb node labels to reference at board level Some boards, such as tablets, have regulators providing power to parts of the display pipeline, like signal converters and LCD panels. Add labels to the simplefb device nodes so that we can reference them in the board dts files to add regulator supply properties. Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/sun6i-a31.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 83c18798cae0..b6ad7850fac6 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -61,7 +61,7 @@ #size-cells = <1>; ranges; - framebuffer@0 { + simplefb_hdmi: framebuffer@0 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0-hdmi"; @@ -69,7 +69,7 @@ status = "disabled"; }; - framebuffer@1 { + simplefb_lcd: framebuffer@1 { compatible = "allwinner,simple-framebuffer", "simple-framebuffer"; allwinner,pipeline = "de_be0-lcd0"; -- cgit v1.2.3-70-g09d2 From a5ea06d0bc123cc7f49d042fab60ddd3964764c8 Mon Sep 17 00:00:00 2001 From: Karsten Merker Date: Fri, 23 Oct 2015 11:50:41 +0800 Subject: ARM: dts: sun6i: Add dts file for MSI Primo81 tablet The MSI Primo81 is an A31s based tablet, with 1G RAM, 16G NAND, 768x1024 IPS LCD display, mono speaker, 0.3 MP front camera, 2.0 MP rear camera, 3500 mAh battery, gt911 touchscreen, mma8452 accelerometer and rtl8188etv usb wifi. Has "power", "volume+" and "volume-" buttons (both volume buttons are also connected to the UBOOT_SEL pin). The external connectors are represented by MicroSD slot, MiniHDMI, MicroUSB OTG and 3.5mm headphone jack. USB OTG is enabled in host only mode. AXP221 USB power supply and GPIO support are required for full USB OTG support. Signed-off-by: Siarhei Siamashka Signed-off-by: Karsten Merker Signed-off-by: Chen-Yu Tsai Signed-off-by: Maxime Ripard --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/sun6i-a31s-primo81.dts | 255 +++++++++++++++++++++++++++++++ 2 files changed, 256 insertions(+) create mode 100644 arch/arm/boot/dts/sun6i-a31s-primo81.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index c00b72e750ab..78ade1a5e886 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -612,6 +612,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-m9.dtb \ sun6i-a31-mele-a1000g-quad.dtb \ sun6i-a31s-cs908.dtb \ + sun6i-a31s-primo81.dtb \ sun6i-a31s-sina31s.dtb \ sun6i-a31s-sinovoip-bpi-m2.dtb \ sun6i-a31s-yones-toptech-bs1078-v2.dtb diff --git a/arch/arm/boot/dts/sun6i-a31s-primo81.dts b/arch/arm/boot/dts/sun6i-a31s-primo81.dts new file mode 100644 index 000000000000..2d4250b1faf8 --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31s-primo81.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2014 Siarhei Siamashka + * Copyright 2015 Karsten Merker + * Copyright 2015 Chen-Yu Tsai + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun6i-a31s.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "MSI Primo81 tablet"; + compatible = "msi,primo81", "allwinner,sun6i-a31s"; +}; + +&cpu0 { + cpu-supply = <®_dcdc3>; +}; + +&ehci0 { + /* rtl8188etv wifi is connected here */ + status = "okay"; +}; + +&i2c0 { + /* pull-ups and device VDDIO use AXP221 DLDO3 */ + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "failed"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + + ctp@5d { + pinctrl-names = "default"; + pinctrl-0 = <>911_int_primo81>; + compatible = "goodix,gt911"; + reg = <0x5d>; + interrupt-parent = <&pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>; /* PA3 */ + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + accelerometer@1c { + pinctrl-names = "default"; + pinctrl-0 = <&mma8452_int_primo81>; + compatible = "fsl,mma8452"; + reg = <0x1c>; + interrupt-parent = <&pio>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; /* PA9 */ + #io-channel-cells = <1>; + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@158 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <158730>; + }; + + button@349 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <349206>; + }; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_primo81>; + vmmc-supply = <®_dcdc1>; + bus-width = <4>; + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ + cd-inverted; + status = "okay"; +}; + +&pio { + gt911_int_primo81: gt911_int_pin@0 { + allwinner,pins = "PA3"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mma8452_int_primo81: mma8452_int_pin@0 { + allwinner,pins = "PA9"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; + + mmc0_cd_pin_primo81: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = ; + allwinner,pull = ; + }; +}; + +&p2wi { + status = "okay"; + + axp22x: pmic@68 { + compatible = "x-powers,axp221"; + reg = <0x68>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +#include "axp22x.dtsi" + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avcc"; +}; + +®_dc1sw { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-lcd"; +}; + +®_dc5ldo { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpus"; /* This is an educated guess */ +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-3v0"; +}; + +®_dcdc2 { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-gpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc4 { + regulator-always-on; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-sys-dll"; +}; + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_dldo3 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vddio-csi"; +}; + +®_eldo3 { + regulator-min-microvolt = <1080000>; + regulator-max-microvolt = <1320000>; + regulator-name = "vdd-mipi-bridge"; +}; + +&simplefb_lcd { + vcc-lcd-supply = <®_dc1sw>; + vdd-mipi-bridge-supply = <®_eldo3>; +}; + +&usb_otg { + /* otg support requires support for AXP221 usb-power-supply and GPIO */ + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_dldo1>; + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 94cb7f76caa0b337acea7c9442a75083a0712c18 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 28 Sep 2015 14:22:05 -0700 Subject: ARM: bcm2835: Switch to using the new clock driver support. This will give us the ability to set the pixel and HDMI state machine clocks for the VC4 KMS driver, change the CPU frequency, and potentially gate clocks in the future (once we also write a power domain driver). It also gives the uart an explicit clock reference, so that we don't need to change the physical addresses of the old fixed clk_bcm2835.c clocks for Raspberry Pi 2 port. Two clocks get their frequencies updated as a result of this. One is uart's apb_pclk, which was previously accidentally grabbing the fixed uart0_pclk due to the apb_pclk not having clk_register_clkdev() called. The uart doesn't seem to do anything with apb_pclk other than make sure it's on, so that appears safe (also, as far as I can see, the apb clock is actually the same as the VPU clock). The other is EMMC, which according to the docs was supposed to be in the 50-100Mhz range, but it turns out the firmware needed to change to running it at the 250Mhz core clock speed to avoid a bug in clock domain crossing. Additionally, anything using BCM2835_CLOCK_VPU will now have a correct clock rate if the user configures the boot-time core clock speed using config.txt. Signed-off-by: Eric Anholt Acked-by: Stephen Warren --- arch/arm/boot/dts/bcm2835.dtsi | 52 +++++++++++++++++++++++------------------- 1 file changed, 28 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 202939486598..46804b3c4387 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -1,4 +1,5 @@ #include +#include #include "skeleton.dtsi" / { @@ -21,6 +22,10 @@ compatible = "brcm,bcm2835-system-timer"; reg = <0x7e003000 0x1000>; interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + /* This could be a reference to BCM2835_CLOCK_TIMER, + * but we don't have the driver using the common clock + * support yet. + */ clock-frequency = <1000000>; }; @@ -57,6 +62,17 @@ reg = <0x7e100000 0x28>; }; + clocks: cprman@7e101000 { + compatible = "brcm,bcm2835-cprman"; + #clock-cells = <1>; + reg = <0x7e101000 0x2000>; + + /* CPRMAN derives everything from the platform's + * oscillator. + */ + clocks = <&clk_osc>; + }; + rng@7e104000 { compatible = "brcm,bcm2835-rng"; reg = <0x7e104000 0x10>; @@ -96,7 +112,9 @@ compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; reg = <0x7e201000 0x1000>; interrupts = <2 25>; - clock-frequency = <3000000>; + clocks = <&clocks BCM2835_CLOCK_UART>, + <&clocks BCM2835_CLOCK_VPU>; + clock-names = "uartclk", "apb_pclk"; arm,primecell-periphid = <0x00241011>; }; @@ -115,7 +133,7 @@ compatible = "brcm,bcm2835-spi"; reg = <0x7e204000 0x1000>; interrupts = <2 22>; - clocks = <&clk_spi>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -125,7 +143,7 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e205000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -135,7 +153,7 @@ compatible = "brcm,bcm2835-sdhci"; reg = <0x7e300000 0x100>; interrupts = <2 30>; - clocks = <&clk_mmc>; + clocks = <&clocks BCM2835_CLOCK_EMMC>; status = "disabled"; }; @@ -143,7 +161,7 @@ compatible = "brcm,bcm2835-i2c"; reg = <0x7e804000 0x1000>; interrupts = <2 21>; - clocks = <&clk_i2c>; + clocks = <&clocks BCM2835_CLOCK_VPU>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -165,28 +183,14 @@ #address-cells = <1>; #size-cells = <0>; - clk_mmc: clock@0 { - compatible = "fixed-clock"; - reg = <0>; - #clock-cells = <0>; - clock-output-names = "mmc"; - clock-frequency = <100000000>; - }; - - clk_i2c: clock@1 { + /* The oscillator is the root of the clock tree. */ + clk_osc: clock@3 { compatible = "fixed-clock"; - reg = <1>; + reg = <3>; #clock-cells = <0>; - clock-output-names = "i2c"; - clock-frequency = <250000000>; + clock-output-names = "osc"; + clock-frequency = <19200000>; }; - clk_spi: clock@2 { - compatible = "fixed-clock"; - reg = <2>; - #clock-cells = <0>; - clock-output-names = "spi"; - clock-frequency = <250000000>; - }; }; }; -- cgit v1.2.3-70-g09d2 From 121432c7a02f3818eefcad88c9ec428b7139b84a Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Fri, 9 Oct 2015 14:27:47 -0700 Subject: ARM: bcm2835: Add the DDC I2C controller to the device tree. We need to use it for getting video modes over HDMI. Signed-off-by: Eric Anholt Acked-by: Stephen Warren --- arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ++++ arch/arm/boot/dts/bcm2835.dtsi | 10 ++++++++++ 2 files changed, 14 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi index ab5474e5d1c8..3572f0367baf 100644 --- a/arch/arm/boot/dts/bcm2835-rpi.dtsi +++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi @@ -52,6 +52,10 @@ clock-frequency = <100000>; }; +&i2c2 { + status = "okay"; +}; + &sdhci { status = "okay"; bus-width = <4>; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 46804b3c4387..aef64de77495 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -167,6 +167,16 @@ status = "disabled"; }; + i2c2: i2c@7e805000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e805000 0x1000>; + interrupts = <2 21>; + clocks = <&clocks BCM2835_CLOCK_VPU>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + usb@7e980000 { compatible = "brcm,bcm2835-usb"; reg = <0x7e980000 0x10000>; -- cgit v1.2.3-70-g09d2 From b29dd5fa56141365ab7e72fd73e5e0e02d62dd6e Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Sat, 24 Oct 2015 03:42:02 +0900 Subject: ARM: dts: use exynos5420-dw-mshc compatible for exynos3250 There are some differences of mobile storage host between exynos3250 and exnos5250. For example, exynos3250 supports the HS400 mode, but exynos5250 doesn't support it. Since exynos3250 can perform the similar function with exynos5420 compatible, this patch changes the compatible from exynos5250 to exynos5420 for mshc. Signed-off-by: Jaehoon Chung Reviewed-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 033def482fc3..2f30d632f1cc 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -333,7 +333,7 @@ }; mshc_0: mshc@12510000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12510000 0x1000>; interrupts = <0 142 0>; clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>; @@ -345,7 +345,7 @@ }; mshc_1: mshc@12520000 { - compatible = "samsung,exynos5250-dw-mshc"; + compatible = "samsung,exynos5420-dw-mshc"; reg = <0x12520000 0x1000>; interrupts = <0 143 0>; clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>; -- cgit v1.2.3-70-g09d2 From 4ae9a4c66cdcb8b5d4e4d904846f1b450dbcabb4 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 21 Aug 2015 14:38:38 +0200 Subject: ARM: dts: Add vbus regulator to USB2 phy nodes on exynos3250, exynos4210 and exynos4412 boards Exynos USB2 PHY driver now supports VBUS regulator, so add it to all boards which have it available. This also fixes commit 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2"), which added new regulators to Trats2 board, but without linking them to the consumers. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2") Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos3250-monk.dts | 1 + arch/arm/boot/dts/exynos3250-rinato.dts | 1 + arch/arm/boot/dts/exynos4210-trats.dts | 2 +- arch/arm/boot/dts/exynos4210-universal_c210.dts | 2 +- arch/arm/boot/dts/exynos4412-trats2.dts | 1 + 5 files changed, 5 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts index c14129e0761d..443a35085846 100644 --- a/arch/arm/boot/dts/exynos3250-monk.dts +++ b/arch/arm/boot/dts/exynos3250-monk.dts @@ -161,6 +161,7 @@ }; &exynos_usbphy { + vbus-supply = <&safeout_reg>; status = "okay"; }; diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts index 830e216f7e10..3e64d5dcdd60 100644 --- a/arch/arm/boot/dts/exynos3250-rinato.dts +++ b/arch/arm/boot/dts/exynos3250-rinato.dts @@ -153,6 +153,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout_reg>; }; &hsotg { diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts index c69e468efd2e..a50be640f1b0 100644 --- a/arch/arm/boot/dts/exynos4210-trats.dts +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -252,6 +252,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safe1_sreg>; }; &fimd { @@ -449,7 +450,6 @@ safe1_sreg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safe2_sreg: ESAFEOUT2 { diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts index 896be8f2342d..81b7ec7b3e31 100644 --- a/arch/arm/boot/dts/exynos4210-universal_c210.dts +++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts @@ -249,6 +249,7 @@ &exynos_usbphy { status = "okay"; + vbus-supply = <&safeout1_reg>; }; &fimd { @@ -488,7 +489,6 @@ safeout1_reg: ESAFEOUT1 { regulator-name = "SAFEOUT1"; - regulator-always-on; }; safeout2_reg: ESAFEOUT2 { diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index d8bf4afb8bd9..40a474c4374b 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -391,6 +391,7 @@ }; &exynos_usbphy { + vbus-supply = <&esafeout1_reg>; status = "okay"; }; -- cgit v1.2.3-70-g09d2 From 698da378a34e521bb3a9fe5cf5b8434f3bc6df13 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Oct 2015 00:12:34 +0300 Subject: ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-aquila The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/s5pv210-aquila.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts index f00cea7aca2f..aa64faa72970 100644 --- a/arch/arm/boot/dts/s5pv210-aquila.dts +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -46,7 +46,7 @@ regulator-name = "V_TF_2.8V"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; -- cgit v1.2.3-70-g09d2 From 1f7ce3d1c96b6f8e38b4afedf9399ca279add78c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 13 Oct 2015 00:12:35 +0300 Subject: ARM: dts: Fix typo in regulator enable GPIO property in s5pv210-goni The property name should be "gpio", not "gpios". Fix it. Signed-off-by: Laurent Pinchart Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/s5pv210-goni.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts index a3d4643b202e..3b76eeeb8410 100644 --- a/arch/arm/boot/dts/s5pv210-goni.dts +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -47,7 +47,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <0>; - gpios = <&mp05 4 0>; + gpio = <&mp05 4 0>; enable-active-high; }; @@ -73,7 +73,7 @@ regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; reg = <3>; - gpios = <&gpj1 3 0>; + gpio = <&gpj1 3 0>; enable-active-high; }; }; -- cgit v1.2.3-70-g09d2 From 69636a85df476f09ed34cff829039ad20cf59fce Mon Sep 17 00:00:00 2001 From: Tomeu Vizoso Date: Thu, 15 Oct 2015 12:31:24 +0200 Subject: ARM: dts: Add clocks to DISP1 domain in exynos5250 Adds to the node of the DISP1 power domain the two clocks that need to be reparented while the domain is powered off: CLK_MOUT_ACLK200_DISP1_SUB and CLK_MOUT_ACLK300_DISP1_SUB. Otherwise the state is unknown at power up and the mixer's clocks are all messed up. Signed-off-by: Tomeu Vizoso Link: http://lkml.kernel.org/g/561CDC33.7050103@collabora.com Signed-off-by: Krzysztof Kozlowski Signed-off-by: Kukjin Kim --- arch/arm/boot/dts/exynos5250.dtsi | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index b24610ea8c2a..88b9cf5f226f 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -130,6 +130,10 @@ compatible = "samsung,exynos4210-pd"; reg = <0x100440A0 0x20>; #power-domain-cells = <0>; + clocks = <&clock CLK_FIN_PLL>, + <&clock CLK_MOUT_ACLK200_DISP1_SUB>, + <&clock CLK_MOUT_ACLK300_DISP1_SUB>; + clock-names = "oscclk", "clk0", "clk1"; }; clock: clock-controller@10010000 { -- cgit v1.2.3-70-g09d2 From dffc912e2c4851960d4b9d33b33dca906b2911b1 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 25 Sep 2015 20:35:33 +0300 Subject: ARM: dts: TI-Nspire: fix cpu compatible value The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/nspire.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi index 390c91aea16d..ee5a0bb22354 100644 --- a/arch/arm/boot/dts/nspire.dtsi +++ b/arch/arm/boot/dts/nspire.dtsi @@ -16,7 +16,7 @@ cpus { cpu@0 { - compatible = "arm,arm926ejs"; + compatible = "arm,arm926ej-s"; }; }; -- cgit v1.2.3-70-g09d2 From 7007c60c28b2f1572b488513d94472046a79fa20 Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Fri, 25 Sep 2015 20:35:34 +0300 Subject: ARM: dts: WM8750: fix cpu compatible value The change corrects cpu compatible property to a defined one, see Documentation/devicetree/bindings/arm/cpus.txt Signed-off-by: Vladimir Zapolskiy Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/wm8750.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/wm8750.dtsi b/arch/arm/boot/dts/wm8750.dtsi index 557a9c2ace49..46d076d7302b 100644 --- a/arch/arm/boot/dts/wm8750.dtsi +++ b/arch/arm/boot/dts/wm8750.dtsi @@ -17,7 +17,7 @@ cpu { device_type = "cpu"; - compatible = "arm,arm1176ej-s"; + compatible = "arm,arm1176jzf"; }; }; -- cgit v1.2.3-70-g09d2 From 06ff6b2d63210922a1b1d0f4997e29ce75b5e0c0 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 21 Oct 2015 20:36:27 +0900 Subject: ARM: dts: uniphier: use stdout-path instead of console Specifying both console and stdout-path is redundant. Add options ":115200n8" to stdout-path and drop "console=ttyS0,115200". Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts | 3 +-- arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts | 3 +-- arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts | 3 +-- arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts | 3 +-- arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts | 3 +-- 5 files changed, 5 insertions(+), 10 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts index e9722a5ea781..f1e9d40149ab 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { diff --git a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts index 1757c4b2c3db..2e36b26f2762 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-ld6b-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts index 47e2edb03401..24626687d4df 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-pro4-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts index adcbbc6b95d8..b7a032156789 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld3-ref.dts @@ -58,8 +58,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts index bcf2e7cc390f..fc7250c61674 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts +++ b/arch/arm/boot/dts/uniphier-ph1-sld8-ref.dts @@ -57,8 +57,7 @@ }; chosen { - bootargs = "console=ttyS0,115200"; - stdout-path = &serial0; + stdout-path = "serial0:115200n8"; }; aliases { -- cgit v1.2.3-70-g09d2 From 97593f773144bc2876e3b5c46d1a5affb9e6eeed Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 21 Oct 2015 20:36:29 +0900 Subject: ARM: dts: uniphier: add ProXstream2 Gentil board support Initial version of DTS for ProXstream2 Gentil board. Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/uniphier-proxstream2-gentil.dts | 74 +++++++++++++++++++++++ 2 files changed, 76 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/uniphier-proxstream2-gentil.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 3e38fbb72e3b..d6d13f00dbb3 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -699,7 +699,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-ld6b-ref.dtb \ uniphier-ph1-pro4-ref.dtb \ uniphier-ph1-sld3-ref.dtb \ - uniphier-ph1-sld8-ref.dtb + uniphier-ph1-sld8-ref.dtb \ + uniphier-proxstream2-gentil.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts new file mode 100644 index 000000000000..5cb58b6cd569 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -0,0 +1,74 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Gentil Board + * + * Copyright (C) 2015 Masahiro Yamada + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Gentil Board"; + compatible = "socionext,proxstream2-gentil", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 13e77e6b52b8e7f4b90e242d73cf561d96ed4e14 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 21 Oct 2015 20:36:30 +0900 Subject: ARM: dts: uniphier: add ProXstream2 Vodka board support Initial version of DTS for ProXstream2 Vodka board. Signed-off-by: Masahiro Yamada Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/uniphier-proxstream2-vodka.dts | 74 ++++++++++++++++++++++++ 2 files changed, 76 insertions(+), 1 deletion(-) create mode 100644 arch/arm/boot/dts/uniphier-proxstream2-vodka.dts (limited to 'arch') diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index d6d13f00dbb3..e6c76501c95c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -700,7 +700,8 @@ dtb-$(CONFIG_ARCH_UNIPHIER) += \ uniphier-ph1-pro4-ref.dtb \ uniphier-ph1-sld3-ref.dtb \ uniphier-ph1-sld8-ref.dtb \ - uniphier-proxstream2-gentil.dtb + uniphier-proxstream2-gentil.dtb \ + uniphier-proxstream2-vodka.dtb dtb-$(CONFIG_ARCH_VERSATILE) += \ versatile-ab.dtb \ versatile-pb.dtb diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts new file mode 100644 index 000000000000..76040bb28e66 --- /dev/null +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -0,0 +1,74 @@ +/* + * Device Tree Source for UniPhier ProXstream2 Vodka Board + * + * Copyright (C) 2015 Masahiro Yamada + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +/include/ "uniphier-proxstream2.dtsi" + +/ { + model = "UniPhier ProXstream2 Vodka Board"; + compatible = "socionext,proxstream2-vodka", "socionext,proxstream2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + serial2 = &serial2; + }; +}; + +&serial2 { + status = "okay"; +}; + +&i2c0 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 53a5fde05d0e1040394b5f6d1f191d49b0ca88f5 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:01:50 +0530 Subject: arm64: Use generic Layerscape SoC family naming Freescale will be a spinning-out a set of ARMv8 based SoCs which will be based on a similar overall SoC architecture. So, this patch converts the existing infrastructure in the arm64/dts, arm64/Kconfig and arm64/configs to use the generic convention ARCH_LAYERSCAPE in place of the more specific FSL_LS2085A, to save code duplication later-on. Signed-off-by: Bhupesh Sharma Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/fsl.txt | 4 ++-- arch/arm64/Kconfig.platforms | 6 +++--- arch/arm64/boot/dts/freescale/Makefile | 2 +- arch/arm64/configs/defconfig | 2 +- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 2a3ba73f0c5c..744b4de4217e 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -128,8 +128,8 @@ Example: reg = <0x0 0x1ee0000 0x0 0x10000>; }; -Freescale LS2085A SoC Device Tree Bindings ------------------------------------------- +Freescale ARMv8 based Layerscape SoC family Device Tree Bindings +---------------------------------------------------------------- LS2085A ARMv8 based Simulator model Required root node properties: diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index 36303c84363e..8aba80a20306 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -28,10 +28,10 @@ config ARCH_EXYNOS7 help This enables support for Samsung Exynos7 SoC family -config ARCH_FSL_LS2085A - bool "Freescale LS2085A SOC" +config ARCH_LAYERSCAPE + bool "ARMv8 based Freescale Layerscape SoC family" help - This enables support for Freescale LS2085A SOC. + This enables support for the Freescale Layerscape SoC family. config ARCH_HISI bool "Hisilicon SoC Family" diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 4f2de3e789ee..fc6fca3c175d 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_FSL_LS2085A) += fsl-ls2085a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2085a-simu.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 7f78e182afb2..8f07e923dd5f 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -34,7 +34,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_BCM_IPROC=y CONFIG_ARCH_BERLIN=y CONFIG_ARCH_EXYNOS7=y -CONFIG_ARCH_FSL_LS2085A=y +CONFIG_ARCH_LAYERSCAPE=y CONFIG_ARCH_HISI=y CONFIG_ARCH_MEDIATEK=y CONFIG_ARCH_ROCKCHIP=y -- cgit v1.2.3-70-g09d2 From f43a4b8507f9b2033003a8f42131a291e07210ef Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:01:51 +0530 Subject: arm64: Rename FSL LS2085A SoC support code to LS2080A Freescale is renaming the LS2085A SoC to LS2080A. This patch addresses the same. Signed-off-by: Bhupesh Sharma Signed-off-by: Arnd Bergmann --- Documentation/devicetree/bindings/arm/fsl.txt | 4 +- arch/arm64/boot/dts/freescale/Makefile | 2 +- arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 65 ++++++++ arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 163 +++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts | 65 -------- arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi | 163 --------------------- 6 files changed, 231 insertions(+), 231 deletions(-) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts delete mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi (limited to 'arch') diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index 744b4de4217e..53f229ad0e35 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -131,7 +131,7 @@ Example: Freescale ARMv8 based Layerscape SoC family Device Tree Bindings ---------------------------------------------------------------- -LS2085A ARMv8 based Simulator model +LS2080A ARMv8 based Simulator model Required root node properties: - - compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; + - compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index fc6fca3c175d..932001a5ba33 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,4 +1,4 @@ -dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2085a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts new file mode 100644 index 000000000000..33d6d0c6efe2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2080a software Simulator model + * + * Copyright (C) 2014-2015, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a software Simulator model"; + compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; + + ethernet@2210000 { + compatible = "smsc,lan91c111"; + reg = <0x0 0x2210000 0x0 0x100>; + interrupts = <0 58 0x1>; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi new file mode 100644 index 000000000000..9597edf5b45a --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -0,0 +1,163 @@ +/* + * Device Tree Include file for Freescale Layerscape-2080A family SoC. + * + * Copyright (C) 2014-2015, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this library; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2080a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* + * We expect the enable-method for cpu's to be "psci", but this + * is dependent on the SoC FW, which will fill this in. + * + * Currently supported enable-method is psci v0.2 + */ + + /* We have 4 clusters having 2 Cortex-A57 cores each */ + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x1>; + }; + + cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + }; + + cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + }; + + cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x200>; + }; + + cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x201>; + }; + + cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x300>; + }; + + cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x301>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <1 9 0x4>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ + <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ + <1 11 0x8>, /* Virtual PPI, active-low */ + <1 10 0x8>; /* Hypervisor PPI, active-low */ + }; + + serial0: serial@21c0500 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + serial1: serial@21c0600 { + device_type = "serial"; + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clock-frequency = <0>; /* Updated by bootloader */ + interrupts = <0 32 0x1>; /* edge triggered */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts deleted file mode 100644 index 82e2a6fccc64..000000000000 --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a-simu.dts +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Device Tree file for Freescale LS2085a software Simulator model - * - * Copyright (C) 2014, Freescale Semiconductor - * - * Bhupesh Sharma - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/dts-v1/; - -/include/ "fsl-ls2085a.dtsi" - -/ { - model = "Freescale Layerscape 2085a software Simulator model"; - compatible = "fsl,ls2085a-simu", "fsl,ls2085a"; - - ethernet@2210000 { - compatible = "smsc,lan91c111"; - reg = <0x0 0x2210000 0x0 0x100>; - interrupts = <0 58 0x1>; - }; -}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi deleted file mode 100644 index e281ceb338c3..000000000000 --- a/arch/arm64/boot/dts/freescale/fsl-ls2085a.dtsi +++ /dev/null @@ -1,163 +0,0 @@ -/* - * Device Tree Include file for Freescale Layerscape-2085A family SoC. - * - * Copyright (C) 2014, Freescale Semiconductor - * - * Bhupesh Sharma - * - * This file is dual-licensed: you can use it either under the terms - * of the GPLv2 or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This library is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ - -/ { - compatible = "fsl,ls2085a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <2>; - #size-cells = <0>; - - /* - * We expect the enable-method for cpu's to be "psci", but this - * is dependent on the SoC FW, which will fill this in. - * - * Currently supported enable-method is psci v0.2 - */ - - /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x0>; - }; - - cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x1>; - }; - - cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x100>; - }; - - cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x101>; - }; - - cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x200>; - }; - - cpu@201 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x201>; - }; - - cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x300>; - }; - - cpu@301 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0 0x301>; - }; - }; - - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>; - /* DRAM space - 1, size : 2 GB DRAM */ - }; - - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ - #interrupt-cells = <3>; - interrupt-controller; - interrupts = <1 9 0x4>; - }; - - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */ - <1 14 0x8>, /* Physical Non-Secure PPI, active-low */ - <1 11 0x8>, /* Virtual PPI, active-low */ - <1 10 0x8>; /* Hypervisor PPI, active-low */ - }; - - serial0: serial@21c0500 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ - }; - - serial1: serial@21c0600 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ - }; - - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - }; -}; -- cgit v1.2.3-70-g09d2 From 5461597f6ce01904a1d95bb03274c4340dd48164 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:01:57 +0530 Subject: dts/ls2080a: Update DTSI to add support of various peripherals This patch updates the LS2080a DTSI (DTS Include) file to add support for the following peripherals: - USB 3.0 Host - PMU - CCN-504 - SATA - SPI - PCIe Signed-off-by: Bhupesh Sharma Signed-off-by: Jaiprakash Singh Signed-off-by: Alison Wang Signed-off-by: Liu Gang Signed-off-by: Minghuan Lian Signed-off-by: Shaohui Xie Signed-off-by: Yangbo Lu Signed-off-by: Scott Wood Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 393 +++++++++++++++++++++++-- 1 file changed, 375 insertions(+), 18 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index 9597edf5b45a..e52536ee60df 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -71,48 +71,56 @@ device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x0>; + clocks = <&clockgen 1 0>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x1>; + clocks = <&clockgen 1 0>; }; cpu@100 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x100>; + clocks = <&clockgen 1 1>; }; cpu@101 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x101>; + clocks = <&clockgen 1 1>; }; cpu@200 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x200>; + clocks = <&clockgen 1 2>; }; cpu@201 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x201>; + clocks = <&clockgen 1 2>; }; cpu@300 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x300>; + clocks = <&clockgen 1 3>; }; cpu@301 { device_type = "cpu"; compatible = "arm,cortex-a57"; reg = <0x0 0x301>; + clocks = <&clockgen 1 3>; }; }; @@ -122,13 +130,32 @@ /* DRAM space - 1, size : 2 GB DRAM */ }; + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + gic: interrupt-controller@6000000 { compatible = "arm,gic-v3"; reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */ + <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; interrupt-controller; interrupts = <1 9 0x4>; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; }; timer { @@ -139,25 +166,355 @@ <1 10 0x8>; /* Hypervisor PPI, active-low */ }; - serial0: serial@21c0500 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ }; - serial1: serial@21c0600 { - device_type = "serial"; - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - clock-frequency = <0>; /* Updated by bootloader */ - interrupts = <0 32 0x1>; /* edge triggered */ - }; + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls2080a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + serial0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + serial1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + }; - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <12>; + interrupts = <0 13 4>, /* global secure fault */ + <0 14 4>, /* combined secure interrupt */ + <0 15 4>, /* global non-secure fault */ + <0 16 4>, /* combined non-secure interrupt */ + /* performance counter interrupts 0-7 */ + <0 211 4>, <0 212 4>, + <0 213 4>, <0 214 4>, + <0 215 4>, <0 216 4>, + <0 217 4>, <0 218 4>, + /* per context interrupt, 64 interrupts */ + <0 146 4>, <0 147 4>, + <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, + <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, + <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, + <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, + <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, + <0 168 4>, <0 169 4>, + <0 170 4>, <0 171 4>, + <0 172 4>, <0 173 4>, + <0 174 4>, <0 175 4>, + <0 176 4>, <0 177 4>, + <0 178 4>, <0 179 4>, + <0 180 4>, <0 181 4>, + <0 182 4>, <0 183 4>, + <0 184 4>, <0 185 4>, + <0 186 4>, <0 187 4>, + <0 188 4>, <0 189 4>, + <0 190 4>, <0 191 4>, + <0 192 4>, <0 193 4>, + <0 194 4>, <0 195 4>, + <0 196 4>, <0 197 4>, + <0 198 4>, <0 199 4>, + <0 200 4>, <0 201 4>, + <0 202 4>, <0 203 4>, + <0 204 4>, <0 205 4>, + <0 206 4>, <0 207 4>, + <0 208 4>, <0 209 4>; + mmu-masters = <&fsl_mc 0x300 0>; + }; + + dspi: dspi@2100000 { + status = "disabled"; + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + }; + + esdhc: esdhc@2140000 { + status = "disabled"; + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; /* Updated by bootloader */ + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + bus-width = <4>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c0: i2c@2000000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c1: i2c@2010000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c2: i2c@2020000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c3: i2c@2030000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + }; + + qspi: quadspi@20c0000 { + status = "disabled"; + compatible = "fsl,vf610-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; + + pcie@3400000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 108 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, + <0000 0 0 2 &gic 0 0 0 110 4>, + <0000 0 0 3 &gic 0 0 0 111 4>, + <0000 0 0 4 &gic 0 0 0 112 4>; + }; + + pcie@3500000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 113 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, + <0000 0 0 2 &gic 0 0 0 115 4>, + <0000 0 0 3 &gic 0 0 0 116 4>, + <0000 0 0 4 &gic 0 0 0 117 4>; + }; + + pcie@3600000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 118 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <8>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, + <0000 0 0 2 &gic 0 0 0 120 4>, + <0000 0 0 3 &gic 0 0 0 121 4>, + <0000 0 0 4 &gic 0 0 0 122 4>; + }; + + pcie@3700000 { + compatible = "fsl,ls2080a-pcie", "snps,dw-pcie"; + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ + reg-names = "regs", "config"; + interrupts = <0 123 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + num-lanes = <4>; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, + <0000 0 0 2 &gic 0 0 0 125 4>, + <0000 0 0 3 &gic 0 0 0 126 4>, + <0000 0 0 4 &gic 0 0 0 127 4>; + }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>; + interrupts = <0 136 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + }; + + usb0: usb3@3100000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + }; + + usb1: usb3@3110000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + }; + + ccn@4000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0x04000000 0x0 0x01000000>; + interrupts = <0 12 4>; + }; }; }; -- cgit v1.2.3-70-g09d2 From cff412ef9d3ae86ffae238e6d0bfdd95edb9cf0d Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:01:59 +0530 Subject: dts/ls2080a: Remove text about writing to Free Software Foundation Checkpatch complains about the text suggesting writing to Free Software Foundation for GPLv2 license copy. This patch removes the same from the .dtsi and .dts Signed-off-by: Bhupesh Sharma Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 5 ----- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 5 ----- 2 files changed, 10 deletions(-) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 33d6d0c6efe2..6d363d5b42ed 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -20,11 +20,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index e52536ee60df..e81cd48d6245 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -20,11 +20,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free - * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - * * Or, alternatively, * * b) Permission is hereby granted, free of charge, to any person -- cgit v1.2.3-70-g09d2 From 066230950eded98cb00a7eb1fea52db76088bcab Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:01:58 +0530 Subject: dts/ls2080a: Update Simulator DTS to add support of various peripherals This patch updates the LS2080a simulator DTS to add support of various peripherals which are supported on the simulator platform and explicitly disables those which are yet not supported on the platform. Signed-off-by: Bhupesh Sharma Signed-off-by: Scott Wood Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts index 6d363d5b42ed..505d038078a3 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-simu.dts @@ -52,9 +52,19 @@ model = "Freescale Layerscape 2080a software Simulator model"; compatible = "fsl,ls2080a-simu", "fsl,ls2080a"; + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + ethernet@2210000 { compatible = "smsc,lan91c111"; reg = <0x0 0x2210000 0x0 0x100>; interrupts = <0 58 0x1>; }; }; + +&ifc { + status = "okay"; +}; + -- cgit v1.2.3-70-g09d2 From b9925d59790d63555e3a3fd3b05d5345be1f6efb Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:02:00 +0530 Subject: dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards This patch adds the LS2080a DTS files for QDS and RDB boards which support the LS2080a SoC. Signed-off-by: Bhupesh Sharma Signed-off-by: Scott Wood Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 204 ++++++++++++++++++++++ arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 166 ++++++++++++++++++ 2 files changed, 370 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts new file mode 100644 index 000000000000..4cb996d6e686 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -0,0 +1,204 @@ +/* + * Device Tree file for Freescale LS2080a QDS Board. + * + * Copyright (C) 2015, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a QDS Board"; + compatible = "fsl,ls2080a-qds", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + +}; + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; +}; + +&i2c0 { + status = "okay"; + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <2>; + }; +}; + +&qspi { + status = "okay"; + qflash0: s25fl008k { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts new file mode 100644 index 000000000000..e127f0baab19 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -0,0 +1,166 @@ +/* + * Device Tree file for Freescale LS2080a RDB Board. + * + * Copyright (C) 2015, Freescale Semiconductor + * + * Bhupesh Sharma + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +/include/ "fsl-ls2080a.dtsi" + +/ { + model = "Freescale Layerscape 2080a RDB Board"; + compatible = "fsl,ls2080a-rdb", "fsl,ls2080a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; +}; + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; + +}; + +&i2c0 { + status = "okay"; + pca9547@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; -- cgit v1.2.3-70-g09d2 From 41adfe8202d2e7ed64f399e875f12f71a7ef7207 Mon Sep 17 00:00:00 2001 From: Bhupesh Sharma Date: Sat, 24 Oct 2015 01:02:01 +0530 Subject: dts/Makefile: Add build support for LS2080a QDS & RDB board DTS This patch adds build support for LS2080a QDS & RDB board DTS files in the arm64 DTS Makefile. Signed-off-by: Bhupesh Sharma Signed-off-by: Arnd Bergmann --- arch/arm64/boot/dts/freescale/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 932001a5ba33..c4957a4aa5aa 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -1,3 +1,5 @@ +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb always := $(dtb-y) -- cgit v1.2.3-70-g09d2 From 5f76048695eea2233b75d95161fa6170d83807ce Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 24 Oct 2015 12:25:31 +0900 Subject: ARM: dts: uniphier: add I2C aliases for ProXstream2 boards Add aliases to fix the I2C indexes like the other UniPhier boards. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/boot/dts/uniphier-proxstream2-gentil.dts | 4 ++++ arch/arm/boot/dts/uniphier-proxstream2-vodka.dts | 4 ++++ 2 files changed, 8 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts index 5cb58b6cd569..9d7ec5c204dd 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-gentil.dts @@ -62,6 +62,10 @@ serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; }; }; diff --git a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts index 76040bb28e66..498acac3d95d 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts +++ b/arch/arm/boot/dts/uniphier-proxstream2-vodka.dts @@ -62,6 +62,10 @@ serial0 = &serial0; serial1 = &serial1; serial2 = &serial2; + i2c0 = &i2c0; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; }; }; -- cgit v1.2.3-70-g09d2 From c770d19459a76919ddd4a2573daceba458cb7809 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Tue, 22 Sep 2015 17:50:57 +0100 Subject: arm64: Juno: Add support for the PCIe host bridge on Juno R1 Juno R1 board sports a functional PCIe host bridge that is compliant with the SBSA standard found [1] here. With the right firmware that initialises the XpressRICH3 controller one can use the generic Host Bridge driver to use the PCIe hardware. Signed-off-by: Liviu Dudau Acked-by: Mark Rutland [1] http://infocenter.arm.com/help/topic/com.arm.doc.den0029a/ --- arch/arm64/boot/dts/arm/juno-r1.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index c62751153a4f..a25964d26bda 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts @@ -109,6 +109,26 @@ #include "juno-base.dtsi" + pcie-controller@40000000 { + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", "pci-host-ecam-generic"; + device_type = "pci"; + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ + bus-range = <0 255>; + linux,pci-domain = <0>; + #address-cells = <3>; + #size-cells = <2>; + dma-coherent; + ranges = <0x01000000 0x00 0x5f800000 0x00 0x5f800000 0x0 0x00800000>, + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 0x08000000>, + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 0x00000000>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &gic 0 0 0 136 4>, + <0 0 0 2 &gic 0 0 0 137 4>, + <0 0 0 3 &gic 0 0 0 138 4>, + <0 0 0 4 &gic 0 0 0 139 4>; + msi-parent = <&v2m_0>; + }; }; &memtimer { -- cgit v1.2.3-70-g09d2 From 324e84cb9265120b49c4835ae850e4b83228aa73 Mon Sep 17 00:00:00 2001 From: Liviu Dudau Date: Fri, 9 Oct 2015 14:10:12 +0100 Subject: arm64: defconfig: Enable PCI generic host bridge by default Now that pci-host-generic can be used under arm64, enable it by default so that SBSA compliant systems can use it. Cc: Will Deacon Cc: Catalin Marinas Signed-off-by: Liviu Dudau --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'arch') diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 34d71dd86781..7c9455a91d53 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -49,6 +49,7 @@ CONFIG_ARCH_XGENE=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y +CONFIG_PCI_HOST_GENERIC=y CONFIG_PCI_XGENE=y CONFIG_SMP=y CONFIG_PREEMPT=y -- cgit v1.2.3-70-g09d2 From 7c62f299bafef82c83169ac0c4cf77874446fc83 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 2 Oct 2015 13:42:21 +0900 Subject: ARM: dts: uniphier: add outer cache controller nodes Add L2 cache controller nodes for all the UniPhier SoC DTSI. Also, add an L3 cache controller node for PH1-Pro5 DTSI. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 27 +++++++++++++++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 14 ++++++++++++++ arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 13 +++++++++++++ arch/arm/boot/dts/uniphier-proxstream2.dtsi | 16 ++++++++++++++++ 6 files changed, 97 insertions(+) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index a6a185fae8f1..ae13469a387c 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index e8bbc454d788..85377b23483f 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(768 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 59c2b127cffa..96da01ed74b6 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -98,6 +100,31 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x8>, + <0x506c0000 0x400>; + interrupts = <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + next-level-cache = <&l3>; + }; + + l3: l3-cache@500c8000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c8000 0x2000>, <0x503c8100 0x8>, + <0x506c8000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(2 * 1024 * 1024)>; + cache-sets = <512>; + cache-line-size = <256>; + cache-level = <3>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 3cc90cd37a26..945b37f45988 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -56,12 +56,14 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; }; @@ -120,6 +122,18 @@ <0x20000100 0x100>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(512 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index 58067dfc16e5..c98428caed47 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -55,6 +55,7 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; }; @@ -91,6 +92,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>; + cache-unified; + cache-size = <(256 * 1024)>; + cache-sets = <256>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index 4c7b24611012..ad5fb390e003 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -56,24 +56,28 @@ device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + next-level-cache = <&l2>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + next-level-cache = <&l2>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + next-level-cache = <&l2>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + next-level-cache = <&l2>; }; }; @@ -110,6 +114,18 @@ #size-cells = <1>; }; + l2: l2-cache@500c0000 { + compatible = "socionext,uniphier-system-cache"; + reg = <0x500c0000 0x2000>, <0x503c0100 0x4>, + <0x506c0000 0x400>; + interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>; + cache-unified; + cache-size = <(1280 * 1024)>; + cache-sets = <512>; + cache-line-size = <128>; + cache-level = <2>; + }; + serial0: serial@54006800 { compatible = "socionext,uniphier-uart"; status = "disabled"; -- cgit v1.2.3-70-g09d2 From 980bbff018f64a22af0e75a12ee14cbfbc547e6a Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 28 Oct 2015 10:39:55 +0100 Subject: ARM64: juno: disable NOR flash node by default After discussing on the mailing list it turns out that accessing the flash memory from the kernel can disrupt CPU sleep states and CPU hotplugging, so let's disable this DT node by default. Setups that want to access the flash can modify this entry to enable the flash again. Quoting Sudeep Holla: "the firmware assumes the flash is always in read mode while Linux leaves NOR flash in "read id" mode after initialization." Reported-by: Sudeep Holla Cc: Mark Rutland Cc: Sudeep Holla Cc: Liviu Dudau Cc: Lorenzo Pieralisi Cc: Catalin Marinas Cc: Leif Lindholm Cc: Ryan Harkin Fixes: 5078f77e1443 "ARM64: juno: add NOR flash to device tree" Signed-off-by: Linus Walleij Signed-off-by: Olof Johansson --- arch/arm64/boot/dts/arm/juno-motherboard.dtsi | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'arch') diff --git a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi index c7c99a42e2e9..8c029ee2a5b5 100644 --- a/arch/arm64/boot/dts/arm/juno-motherboard.dtsi +++ b/arch/arm64/boot/dts/arm/juno-motherboard.dtsi @@ -109,6 +109,13 @@ linux,part-probe = "afs"; reg = <0 0x00000000 0x04000000>; bank-width = <4>; + /* + * Unfortunately, accessing the flash disturbs + * the CPU idle states (suspend) and CPU + * hotplug of the platform. For this reason, + * flash hardware access is disabled by default. + */ + status = "disabled"; }; ethernet@2,00000000 { -- cgit v1.2.3-70-g09d2 From 1b38b0e3349d733679e91b029a7f0dfd9e16a169 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 27 Oct 2015 12:21:05 +0900 Subject: ARM: dts: uniphier: add system-bus-controller nodes The System Bus Controller block has two register regions, but having only the second one in a separate node was not nice. Replace it with a new node with two register regions in it. Signed-off-by: Masahiro Yamada Signed-off-by: Olof Johansson --- arch/arm/boot/dts/uniphier-ph1-ld4.dtsi | 7 +++---- arch/arm/boot/dts/uniphier-ph1-pro4.dtsi | 7 +++---- arch/arm/boot/dts/uniphier-ph1-pro5.dtsi | 7 +++---- arch/arm/boot/dts/uniphier-ph1-sld3.dtsi | 7 +++---- arch/arm/boot/dts/uniphier-ph1-sld8.dtsi | 7 +++---- arch/arm/boot/dts/uniphier-proxstream2.dtsi | 7 +++---- 6 files changed, 18 insertions(+), 24 deletions(-) (limited to 'arch') diff --git a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi index ae13469a387c..af493819548d 100644 --- a/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-ld4.dtsi @@ -200,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi index 85377b23483f..254642fe0e71 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro4.dtsi @@ -232,10 +232,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb2: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi index 96da01ed74b6..11eb76239feb 100644 --- a/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-pro5.dtsi @@ -241,10 +241,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi index 945b37f45988..691a17d765c2 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld3.dtsi @@ -216,10 +216,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi index c98428caed47..e88559b66be7 100644 --- a/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi +++ b/arch/arm/boot/dts/uniphier-ph1-sld8.dtsi @@ -200,10 +200,9 @@ clock-frequency = <100000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; usb0: usb@5a800100 { diff --git a/arch/arm/boot/dts/uniphier-proxstream2.dtsi b/arch/arm/boot/dts/uniphier-proxstream2.dtsi index ad5fb390e003..259f1a909e24 100644 --- a/arch/arm/boot/dts/uniphier-proxstream2.dtsi +++ b/arch/arm/boot/dts/uniphier-proxstream2.dtsi @@ -251,10 +251,9 @@ clock-frequency = <400000>; }; - system-bus-controller-misc@59800000 { - compatible = "socionext,uniphier-system-bus-controller-misc", - "syscon"; - reg = <0x59800000 0x2000>; + system-bus-controller@58c00000 { + compatible = "socionext,uniphier-system-bus-controller"; + reg = <0x58c00000 0x400>, <0x59800000 0x2000>; }; pinctrl: pinctrl@5f801000 { -- cgit v1.2.3-70-g09d2