From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/pata_sl82c105.c | 388 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 388 insertions(+) create mode 100644 drivers/ata/pata_sl82c105.c (limited to 'drivers/ata/pata_sl82c105.c') diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c new file mode 100644 index 000000000000..47b290b5604a --- /dev/null +++ b/drivers/ata/pata_sl82c105.c @@ -0,0 +1,388 @@ +/* + * pata_sl82c105.c - SL82C105 PATA for new ATA layer + * (C) 2005 Red Hat Inc + * Alan Cox + * + * Based in part on linux/drivers/ide/pci/sl82c105.c + * SL82C105/Winbond 553 IDE driver + * + * and in part on the documentation and errata sheet + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_sl82c105" +#define DRV_VERSION "0.2.2" + +enum { + /* + * SL82C105 PCI config register 0x40 bits. + */ + CTRL_IDE_IRQB = (1 << 30), + CTRL_IDE_IRQA = (1 << 28), + CTRL_LEGIRQ = (1 << 11), + CTRL_P1F16 = (1 << 5), + CTRL_P1EN = (1 << 4), + CTRL_P0F16 = (1 << 1), + CTRL_P0EN = (1 << 0) +}; + +/** + * sl82c105_pre_reset - probe begin + * @ap: ATA port + * + * Set up cable type and use generic probe init + */ + +static int sl82c105_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits sl82c105_enable_bits[] = { + { 0x40, 1, 0x01, 0x01 }, + { 0x40, 1, 0x10, 0x10 } + }; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + if (ap->port_no && !pci_test_config_bits(pdev, &sl82c105_enable_bits[ap->port_no])) { + ata_port_disable(ap); + dev_printk(KERN_INFO, &pdev->dev, "port disabled. ignoring.\n"); + return 0; + } + ap->cbl = ATA_CBL_PATA40; + return ata_std_prereset(ap); +} + + +static void sl82c105_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, sl82c105_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + + +/** + * sl82c105_configure_piomode - set chip PIO timing + * @ap: ATA interface + * @adev: ATA device + * @pio: PIO mode + * + * Called to do the PIO mode setup. Our timing registers are shared + * so a configure_dmamode call will undo any work we do here and vice + * versa + */ + +static void sl82c105_configure_piomode(struct ata_port *ap, struct ata_device *adev, int pio) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 pio_timing[5] = { + 0x50D, 0x407, 0x304, 0x242, 0x240 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + + pci_write_config_word(pdev, timing, pio_timing[pio]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_piomode - set initial PIO mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the PIO mode setup. Our timing registers are shared + * but we want to set the PIO timing by default. + */ + +static void sl82c105_set_piomode(struct ata_port *ap, struct ata_device *adev) +{ + sl82c105_configure_piomode(ap, adev, adev->pio_mode - XFER_PIO_0); +} + +/** + * sl82c105_configure_dmamode - set DMA mode in chip + * @ap: ATA interface + * @adev: ATA device + * + * Load DMA cycle times into the chip ready for a DMA transfer + * to occur. + */ + +static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + static u16 dma_timing[3] = { + 0x707, 0x201, 0x200 + }; + u16 dummy; + int timing = 0x44 + (8 * ap->port_no) + (4 * adev->devno); + int dma = adev->dma_mode - XFER_MW_DMA_0; + + pci_write_config_word(pdev, timing, dma_timing[dma]); + /* Can we lose this oddity of the old driver */ + pci_read_config_word(pdev, timing, &dummy); +} + +/** + * sl82c105_set_dmamode - set initial DMA mode data + * @ap: ATA interface + * @adev: ATA device + * + * Called to do the DMA mode setup. This replaces the PIO timings + * for the device in question. Set appropriate PIO timings not DMA + * timings at this point. + */ + +static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) +{ + switch(adev->dma_mode) { + case XFER_MW_DMA_0: + sl82c105_configure_piomode(ap, adev, 1); + break; + case XFER_MW_DMA_1: + sl82c105_configure_piomode(ap, adev, 3); + break; + case XFER_MW_DMA_2: + sl82c105_configure_piomode(ap, adev, 3); + break; + default: + BUG(); + } +} + +/** + * sl82c105_reset_engine - Reset the DMA engine + * @ap: ATA interface + * + * The sl82c105 has some serious problems with the DMA engine + * when transfers don't run as expected or ATAPI is used. The + * recommended fix is to reset the engine each use using a chip + * test register. + */ + +static void sl82c105_reset_engine(struct ata_port *ap) +{ + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u16 val; + + pci_read_config_word(pdev, 0x7E, &val); + pci_write_config_word(pdev, 0x7E, val | 4); + pci_write_config_word(pdev, 0x7E, val & ~4); +} + +/** + * sl82c105_bmdma_start - DMA engine begin + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * FIXME: if we switch clock at BMDMA start/end we might get better + * PIO performance on DMA capable devices. + */ + +static void sl82c105_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + sl82c105_reset_engine(ap); + + /* Set the clocks for DMA */ + sl82c105_configure_dmamode(ap, qc->dev); + /* Activate DMA */ + ata_bmdma_start(qc); +} + +/** + * sl82c105_bmdma_end - DMA engine stop + * @qc: ATA command + * + * Reset the DMA engine each use as recommended by the errata + * document. + * + * This function is also called to turn off DMA when a timeout occurs + * during DMA operation. In both cases we need to reset the engine, + * so no actual eng_timeout handler is required. + * + * We assume bmdma_stop is always called if bmdma_start as called. If + * not then we may need to wrap qc_issue. + */ + +static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + ata_bmdma_stop(qc); + sl82c105_reset_engine(ap); + + /* This will redo the initial setup of the DMA device to matching + PIO timings */ + sl82c105_set_dmamode(ap, qc->dev); +} + +static struct scsi_host_template sl82c105_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static struct ata_port_operations sl82c105_port_ops = { + .port_disable = ata_port_disable, + .set_piomode = sl82c105_set_piomode, + .set_dmamode = sl82c105_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .error_handler = sl82c105_error_handler, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = sl82c105_bmdma_start, + .bmdma_stop = sl82c105_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .eng_timeout = ata_eng_timeout, + .data_xfer = ata_pio_data_xfer, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop +}; + +/** + * sl82c105_bridge_revision - find bridge version + * @pdev: PCI device for the ATA function + * + * Locates the PCI bridge associated with the ATA function and + * providing it is a Winbond 553 reports the revision. If it cannot + * find a revision or the right device it returns -1 + */ + +static int sl82c105_bridge_revision(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + u8 rev; + + /* + * The bridge should be part of the same device, but function 0. + */ + bridge = pci_get_slot(pdev->bus, + PCI_DEVFN(PCI_SLOT(pdev->devfn), 0)); + if (!bridge) + return -1; + + /* + * Make sure it is a Winbond 553 and is an ISA bridge. + */ + if (bridge->vendor != PCI_VENDOR_ID_WINBOND || + bridge->device != PCI_DEVICE_ID_WINBOND_83C553 || + bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) { + pci_dev_put(bridge); + return -1; + } + /* + * We need to find function 0's revision, not function 1 + */ + pci_read_config_byte(bridge, PCI_REVISION_ID, &rev); + + pci_dev_put(bridge); + return rev; +} + + +static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id) +{ + static struct ata_port_info info_dma = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info info_early = { + .sht = &sl82c105_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, + .port_ops = &sl82c105_port_ops + }; + static struct ata_port_info *port_info[2] = { &info_early, &info_early }; + u32 val; + int rev; + + rev = sl82c105_bridge_revision(dev); + + if (rev == -1) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Unable to find bridge, disabling DMA.\n"); + else if (rev <= 5) + dev_printk(KERN_WARNING, &dev->dev, "pata_sl82c105: Early bridge revision, no DMA available.\n"); + else { + port_info[0] = &info_dma; + port_info[1] = &info_dma; + } + + pci_read_config_dword(dev, 0x40, &val); + val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16; + pci_write_config_dword(dev, 0x40, val); + + + return ata_pci_init_one(dev, port_info, 1); /* For now */ +} + +static struct pci_device_id sl82c105[] = { + { PCI_DEVICE(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105), }, + { 0, }, +}; + +static struct pci_driver sl82c105_pci_driver = { + .name = DRV_NAME, + .id_table = sl82c105, + .probe = sl82c105_init_one, + .remove = ata_pci_remove_one +}; + +static int __init sl82c105_init(void) +{ + return pci_register_driver(&sl82c105_pci_driver); +} + + +static void __exit sl82c105_exit(void) +{ + pci_unregister_driver(&sl82c105_pci_driver); +} + + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("low-level driver for Sl82c105"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sl82c105); +MODULE_VERSION(DRV_VERSION); + +module_init(sl82c105_init); +module_exit(sl82c105_exit); -- cgit v1.2.3-70-g09d2