From 514312c07f6cd2f1ffe5a90d42b6080868a03a26 Mon Sep 17 00:00:00 2001 From: Charlene Liu Date: Tue, 9 Jan 2024 11:31:20 -0500 Subject: Revert "drm/amd/display: initialize all the dpm level's stutter latency" Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed Acked-by: Tom Chung Signed-off-by: Charlene Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index 64d01a9cd68c..8b0f930be5ae 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -341,9 +341,6 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc, break; } - if (dml2->config.bbox_overrides.clks_table.num_states) - p->in_states->num_states = dml2->config.bbox_overrides.clks_table.num_states; - /* Override from passed values, if available */ for (i = 0; i < p->in_states->num_states; i++) { if (dml2->config.bbox_overrides.sr_exit_latency_us) { @@ -400,6 +397,7 @@ void dml2_init_soc_states(struct dml2_context *dml2, const struct dc *in_dc, } /* Copy clocks tables entries, if available */ if (dml2->config.bbox_overrides.clks_table.num_states) { + p->in_states->num_states = dml2->config.bbox_overrides.clks_table.num_states; for (i = 0; i < dml2->config.bbox_overrides.clks_table.num_entries_per_clk.num_dcfclk_levels; i++) { p->in_states->state_array[i].dcfclk_mhz = dml2->config.bbox_overrides.clks_table.clk_entries[i].dcfclk_mhz; -- cgit v1.2.3-70-g09d2 From 2ff33c759a4247c84ec0b7815f1f223e155ba82a Mon Sep 17 00:00:00 2001 From: Sohaib Nadeem Date: Tue, 16 Jan 2024 11:00:00 -0500 Subject: drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz [why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere Reviewed-by: Alvin Lee Acked-by: Tom Chung Signed-off-by: Sohaib Nadeem Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 9f37f717a1f8..b13a6fd7cc83 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -2753,7 +2753,7 @@ static int build_synthetic_soc_states(bool disable_dc_mode_overwrite, struct clk struct _vcs_dpi_voltage_scaling_st entry = {0}; struct clk_limit_table_entry max_clk_data = {0}; - unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299; + unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599; static const unsigned int num_dcfclk_stas = 5; unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564}; -- cgit v1.2.3-70-g09d2 From b5abd7f983e14054593dc91d6df2aa5f8cc67652 Mon Sep 17 00:00:00 2001 From: Charlene Liu Date: Tue, 16 Jan 2024 19:54:15 -0500 Subject: drm/amd/display: fix USB-C flag update after enc10 feature init [why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed Acked-by: Tom Chung Signed-off-by: Charlene Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 ++-- drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c index 501388014855..d761b0df2878 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c @@ -203,12 +203,12 @@ void dcn32_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector; - if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1; enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; enc10->base.features = *enc_features; + if (enc10->base.connector.id == CONNECTOR_ID_USBC) + enc10->base.features.flags.bits.DP_IS_USB_C = 1; enc10->base.transmitter = init_data->transmitter; diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c index da94e5309fba..81e349d5835b 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c @@ -184,8 +184,6 @@ void dcn35_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector; - if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1; enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; @@ -240,6 +238,8 @@ void dcn35_link_encoder_construct( } enc10->base.features.flags.bits.HDMI_6GB_EN = 1; + if (enc10->base.connector.id == CONNECTOR_ID_USBC) + enc10->base.features.flags.bits.DP_IS_USB_C = 1; if (bp_funcs->get_connector_speed_cap_info) result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios, -- cgit v1.2.3-70-g09d2 From 31c2bf25eaf51c2d45f092284a28e97f43b54c15 Mon Sep 17 00:00:00 2001 From: Dmytro Laktyushkin Date: Wed, 17 Jan 2024 16:46:02 -0500 Subject: drm/amd/display: Fix DPSTREAM CLK on and off sequence [Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu Reviewed-by: Dmytro Laktyushkin Acked-by: Tom Chung Signed-off-by: Daniel Miess Signed-off-by: Dmytro Laktyushkin Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 2 +- drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 11 +++++------ 2 files changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 5660f15da291..2352428bcea3 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1183,9 +1183,9 @@ void dce110_disable_stream(struct pipe_ctx *pipe_ctx) dto_params.timing = &pipe_ctx->stream->timing; dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; if (dccg) { - dccg->funcs->set_dtbclk_dto(dccg, &dto_params); dccg->funcs->disable_symclk32_se(dccg, dp_hpo_inst); dccg->funcs->set_dpstreamclk(dccg, REFCLK, tg->inst, dp_hpo_inst); + dccg->funcs->set_dtbclk_dto(dccg, &dto_params); } } else if (dccg && dccg->funcs->disable_symclk_se) { dccg->funcs->disable_symclk_se(dccg, stream_enc->stream_enc_inst, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c index e931342fcf4c..4853ecac53f9 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c @@ -2790,18 +2790,17 @@ void dcn20_enable_stream(struct pipe_ctx *pipe_ctx) } if (dc->link_srv->dp_is_128b_132b_signal(pipe_ctx)) { - dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; - dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst); - - phyd32clk = get_phyd32clk_src(link); - dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk); - dto_params.otg_inst = tg->inst; dto_params.pixclk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10; dto_params.num_odm_segments = get_odm_segment_count(pipe_ctx); dto_params.timing = &pipe_ctx->stream->timing; dto_params.ref_dtbclk_khz = dc->clk_mgr->funcs->get_dtb_ref_clk_frequency(dc->clk_mgr); dccg->funcs->set_dtbclk_dto(dccg, &dto_params); + dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst; + dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst); + + phyd32clk = get_phyd32clk_src(link); + dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk); } else { if (dccg->funcs->enable_symclk_se) dccg->funcs->enable_symclk_se(dccg, stream_enc->stream_enc_inst, -- cgit v1.2.3-70-g09d2 From 39079fe8e660851abbafa90cd55cbf029210661f Mon Sep 17 00:00:00 2001 From: Wenjing Liu Date: Thu, 18 Jan 2024 15:14:15 -0500 Subject: drm/amd/display: fix incorrect mpc_combine array size [why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira Reviewed-by: Nevenko Stupar Reviewed-by: Chaitanya Dhere Acked-by: Tom Chung Signed-off-by: Wenjing Liu Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index b13a6fd7cc83..dd781a20692e 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -1112,7 +1112,7 @@ struct pipe_slice_table { struct pipe_ctx *pri_pipe; struct dc_plane_state *plane; int slice_count; - } mpc_combines[MAX_SURFACES]; + } mpc_combines[MAX_PLANES]; int mpc_combine_count; }; -- cgit v1.2.3-70-g09d2 From 191cb4ed33a61c90feed8bda0f0df3a419604fc8 Mon Sep 17 00:00:00 2001 From: Nicholas Susanto Date: Thu, 18 Jan 2024 13:34:40 -0500 Subject: drm/amd/display: Underflow workaround by increasing SR exit latency [Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by: Chaitanya Dhere Acked-by: Tom Chung Signed-off-by: Nicholas Susanto Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 32 +++++++++++----------- .../gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c | 4 +-- 2 files changed, 18 insertions(+), 18 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 9c660d1facc7..14cec1c7b718 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -437,32 +437,32 @@ static struct wm_table ddr5_wm_table = { .wm_inst = WM_A, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_B, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_C, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_D, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.72, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, } @@ -474,32 +474,32 @@ static struct wm_table lpddr5_wm_table = { .wm_inst = WM_A, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_B, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_C, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, { .wm_inst = WM_D, .wm_type = WM_TYPE_PSTATE_CHG, .pstate_latency_us = 11.65333, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .valid = true, }, } diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c index 475c4ec43c01..7ea2bd5374d5 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn35/dcn35_fpu.c @@ -164,8 +164,8 @@ struct _vcs_dpi_soc_bounding_box_st dcn3_5_soc = { }, }, .num_states = 5, - .sr_exit_time_us = 14.0, - .sr_enter_plus_exit_time_us = 16.0, + .sr_exit_time_us = 28.0, + .sr_enter_plus_exit_time_us = 30.0, .sr_exit_z8_time_us = 210.0, .sr_enter_plus_exit_z8_time_us = 320.0, .fclk_change_latency_us = 24.0, -- cgit v1.2.3-70-g09d2 From faf51b201bc42adf500945732abb6220c707d6f3 Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Thu, 11 Jan 2024 14:46:01 -0500 Subject: drm/amd/display: Fix dcn35 8k30 Underflow/Corruption Issue [why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu Acked-by: Tom Chung Signed-off-by: Fangzhi Zuo Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../amd/display/dc/dml2/dml2_translation_helper.c | 29 ++++++++-------------- drivers/gpu/drm/amd/display/dc/inc/core_types.h | 2 ++ 2 files changed, 13 insertions(+), 18 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c index 8b0f930be5ae..23a608274096 100644 --- a/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c +++ b/drivers/gpu/drm/amd/display/dc/dml2/dml2_translation_helper.c @@ -791,35 +791,28 @@ static void populate_dml_surface_cfg_from_plane_state(enum dml_project_id dml2_p } } -/*TODO no support for mpc combine, need rework - should calculate scaling params based on plane+stream*/ -static struct scaler_data get_scaler_data_for_plane(const struct dc_plane_state *in, const struct dc_state *context) +static struct scaler_data get_scaler_data_for_plane(const struct dc_plane_state *in, struct dc_state *context) { int i; - struct scaler_data data = { 0 }; + struct pipe_ctx *temp_pipe = &context->res_ctx.temp_pipe; + + memset(temp_pipe, 0, sizeof(struct pipe_ctx)); for (i = 0; i < MAX_PIPES; i++) { const struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; if (pipe->plane_state == in && !pipe->prev_odm_pipe) { - const struct pipe_ctx *next_pipe = pipe->next_odm_pipe; - - data = context->res_ctx.pipe_ctx[i].plane_res.scl_data; - while (next_pipe) { - data.h_active += next_pipe->plane_res.scl_data.h_active; - data.recout.width += next_pipe->plane_res.scl_data.recout.width; - if (in->rotation == ROTATION_ANGLE_0 || in->rotation == ROTATION_ANGLE_180) { - data.viewport.width += next_pipe->plane_res.scl_data.viewport.width; - } else { - data.viewport.height += next_pipe->plane_res.scl_data.viewport.height; - } - next_pipe = next_pipe->next_odm_pipe; - } + temp_pipe->stream = pipe->stream; + temp_pipe->plane_state = pipe->plane_state; + temp_pipe->plane_res.scl_data.taps = pipe->plane_res.scl_data.taps; + + resource_build_scaling_params(temp_pipe); break; } } ASSERT(i < MAX_PIPES); - return data; + return temp_pipe->plane_res.scl_data; } static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned int location, const struct dc_stream_state *in) @@ -864,7 +857,7 @@ static void populate_dummy_dml_plane_cfg(struct dml_plane_cfg_st *out, unsigned out->ScalerEnabled[location] = false; } -static void populate_dml_plane_cfg_from_plane_state(struct dml_plane_cfg_st *out, unsigned int location, const struct dc_plane_state *in, const struct dc_state *context) +static void populate_dml_plane_cfg_from_plane_state(struct dml_plane_cfg_st *out, unsigned int location, const struct dc_plane_state *in, struct dc_state *context) { const struct scaler_data scaler_data = get_scaler_data_for_plane(in, context); diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h index f74ae0d41d3c..3a6bf77a6873 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h +++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h @@ -469,6 +469,8 @@ struct resource_context { unsigned int hpo_dp_link_enc_to_link_idx[MAX_HPO_DP2_LINK_ENCODERS]; int hpo_dp_link_enc_ref_cnts[MAX_HPO_DP2_LINK_ENCODERS]; bool is_mpc_3dlut_acquired[MAX_PIPES]; + /* solely used for build scalar data in dml2 */ + struct pipe_ctx temp_pipe; }; struct dce_bw_output { -- cgit v1.2.3-70-g09d2 From 492a1e67ee59312b27c85c275298080fde392190 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Tue, 30 Jan 2024 14:06:43 +0530 Subject: drm/amd/display: Add NULL check for kzalloc in 'amdgpu_dm_atomic_commit_tail()' Add a NULL check for the kzalloc call that allocates memory for dummy_updates in the amdgpu_dm_atomic_commit_tail function. Previously, if kzalloc failed to allocate memory and returned NULL, the code would attempt to use the NULL pointer. The fix is to check if kzalloc returns NULL, and if so, log an error message and skip the rest of the current loop iteration with the continue statement. This prevents the code from attempting to use the NULL pointer. Cc: Julia Lawall Cc: Aurabindo Pillai Cc: Rodrigo Siqueira Cc: Alex Hung Cc: Alex Deucher Reported-by: Julia Lawall Reported-by: kernel test robot Closes: https://lore.kernel.org/r/202401300629.ICnCt983-lkp@intel.com/ Fixes: 135fd1b35690 ("drm/amd/display: Reduce stack size") Signed-off-by: Srinivasan Shanmugam Reviewed-by: Aurabindo Pillai Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6cda5b536362..d292f290cd6e 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -9187,6 +9187,10 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) * To fix this, DC should permit updating only stream properties. */ dummy_updates = kzalloc(sizeof(struct dc_surface_update) * MAX_SURFACES, GFP_ATOMIC); + if (!dummy_updates) { + DRM_ERROR("Failed to allocate memory for dummy_updates.\n"); + continue; + } for (j = 0; j < status->plane_count; j++) dummy_updates[j].surface = status->plane_states[0]; -- cgit v1.2.3-70-g09d2 From 97cba232549b9fe7e491fb60a69cf93075015f29 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Mon, 29 Jan 2024 21:17:09 +0530 Subject: drm/amd/display: Fix buffer overflow in 'get_host_router_total_dp_tunnel_bw()' The error message buffer overflow 'dc->links' 12 <= 12 suggests that the code is trying to access an element of the dc->links array that is beyond its bounds. In C, arrays are zero-indexed, so an array with 12 elements has valid indices from 0 to 11. Trying to access dc->links[12] would be an attempt to access the 13th element of a 12-element array, which is a buffer overflow. To fix this, ensure that the loop does not go beyond the last valid index when accessing dc->links[i + 1] by subtracting 1 from the loop condition. This would ensure that i + 1 is always a valid index in the array. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_dpia_bw.c:208 get_host_router_total_dp_tunnel_bw() error: buffer overflow 'dc->links' 12 <= 12 Fixes: 59f1622a5f05 ("drm/amd/display: Add dpia display mode validation logic") Cc: PeiChen Huang Cc: Aric Cyr Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Cc: Meenakshikumar Somasundaram Signed-off-by: Srinivasan Shanmugam Reviewed-by: Tom Chung Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c index dd0d2b206462..5491b707cec8 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_dpia_bw.c @@ -196,7 +196,7 @@ static int get_host_router_total_dp_tunnel_bw(const struct dc *dc, uint8_t hr_in struct dc_link *link_dpia_primary, *link_dpia_secondary; int total_bw = 0; - for (uint8_t i = 0; i < MAX_PIPES * 2; ++i) { + for (uint8_t i = 0; i < (MAX_PIPES * 2) - 1; ++i) { if (!dc->links[i] || dc->links[i]->ep_type != DISPLAY_ENDPOINT_USB4_DPIA) continue; -- cgit v1.2.3-70-g09d2 From e96fddb32931d007db12b1fce9b5e8e4c080401b Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Sat, 27 Jan 2024 18:34:01 +0530 Subject: drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()' 'panel_cntl' structure used to control the display panel could be null, dereferencing it could lead to a null pointer access. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn21/dcn21_hwseq.c:269 dcn21_set_backlight_level() error: we previously assumed 'panel_cntl' could be null (see line 250) Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun Cc: Anthony Koo Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Anthony Koo Signed-off-by: Alex Deucher --- .../drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c | 39 +++++++++++----------- 1 file changed, 20 insertions(+), 19 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c index 8e88dcaf88f5..a9cd39f77360 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c @@ -237,34 +237,35 @@ bool dcn21_set_backlight_level(struct pipe_ctx *pipe_ctx, { struct dc_context *dc = pipe_ctx->stream->ctx; struct abm *abm = pipe_ctx->stream_res.abm; + struct timing_generator *tg = pipe_ctx->stream_res.tg; struct panel_cntl *panel_cntl = pipe_ctx->stream->link->panel_cntl; + uint32_t otg_inst; + + if (!abm && !tg && !panel_cntl) + return false; + + otg_inst = tg->inst; if (dc->dc->res_pool->dmcu) { dce110_set_backlight_level(pipe_ctx, backlight_pwm_u16_16, frame_ramp); return true; } - if (abm != NULL) { - uint32_t otg_inst = pipe_ctx->stream_res.tg->inst; - - if (abm && panel_cntl) { - if (abm->funcs && abm->funcs->set_pipe_ex) { - abm->funcs->set_pipe_ex(abm, - otg_inst, - SET_ABM_PIPE_NORMAL, - panel_cntl->inst, - panel_cntl->pwrseq_inst); - } else { - dmub_abm_set_pipe(abm, - otg_inst, - SET_ABM_PIPE_NORMAL, - panel_cntl->inst, - panel_cntl->pwrseq_inst); - } - } + if (abm->funcs && abm->funcs->set_pipe_ex) { + abm->funcs->set_pipe_ex(abm, + otg_inst, + SET_ABM_PIPE_NORMAL, + panel_cntl->inst, + panel_cntl->pwrseq_inst); + } else { + dmub_abm_set_pipe(abm, + otg_inst, + SET_ABM_PIPE_NORMAL, + panel_cntl->inst, + panel_cntl->pwrseq_inst); } - if (abm && abm->funcs && abm->funcs->set_backlight_level_pwm) + if (abm->funcs && abm->funcs->set_backlight_level_pwm) abm->funcs->set_backlight_level_pwm(abm, backlight_pwm_u16_16, frame_ramp, 0, panel_cntl->inst); else -- cgit v1.2.3-70-g09d2 From 66951d98d9bf45ba25acf37fe0747253fafdf298 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Wed, 31 Jan 2024 08:49:41 +0530 Subject: drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()' In "u32 otg_inst = pipe_ctx->stream_res.tg->inst;" pipe_ctx->stream_res.tg could be NULL, it is relying on the caller to ensure the tg is not NULL. Fixes: 474ac4a875ca ("drm/amd/display: Implement some asic specific abm call backs.") Cc: Yongqiang Sun Cc: Anthony Koo Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Anthony Koo Signed-off-by: Alex Deucher --- .../drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c | 24 +++++++++++++--------- 1 file changed, 14 insertions(+), 10 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c index a9cd39f77360..5c7f380a84f9 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c @@ -206,28 +206,32 @@ void dcn21_set_abm_immediate_disable(struct pipe_ctx *pipe_ctx) void dcn21_set_pipe(struct pipe_ctx *pipe_ctx) { struct abm *abm = pipe_ctx->stream_res.abm; - uint32_t otg_inst = pipe_ctx->stream_res.tg->inst; + struct timing_generator *tg = pipe_ctx->stream_res.tg; struct panel_cntl *panel_cntl = pipe_ctx->stream->link->panel_cntl; struct dmcu *dmcu = pipe_ctx->stream->ctx->dc->res_pool->dmcu; + uint32_t otg_inst; + + if (!abm && !tg && !panel_cntl) + return; + + otg_inst = tg->inst; if (dmcu) { dce110_set_pipe(pipe_ctx); return; } - if (abm && panel_cntl) { - if (abm->funcs && abm->funcs->set_pipe_ex) { - abm->funcs->set_pipe_ex(abm, + if (abm->funcs && abm->funcs->set_pipe_ex) { + abm->funcs->set_pipe_ex(abm, otg_inst, SET_ABM_PIPE_NORMAL, panel_cntl->inst, panel_cntl->pwrseq_inst); - } else { - dmub_abm_set_pipe(abm, otg_inst, - SET_ABM_PIPE_NORMAL, - panel_cntl->inst, - panel_cntl->pwrseq_inst); - } + } else { + dmub_abm_set_pipe(abm, otg_inst, + SET_ABM_PIPE_NORMAL, + panel_cntl->inst, + panel_cntl->pwrseq_inst); } } -- cgit v1.2.3-70-g09d2 From 2103370afba74dda39ff5d2d69163c86644ce528 Mon Sep 17 00:00:00 2001 From: Wenjing Liu Date: Thu, 18 Jan 2024 18:12:15 -0500 Subject: drm/amd/display: set odm_combine_policy based on context in dcn32 resource [why] When populating dml pipes, odm combine policy should be assigned based on the pipe topology of the context passed in. DML pipes could be repopulated multiple times during single validate bandwidth attempt. We need to make sure that whenever we repopulate the dml pipes it is always aligned with the updated context. There is a case where DML pipes get repopulated during FPO optimization after ODM combine policy is changed. Since in the current code we reinitlaize ODM combine policy, even though the current context has ODM combine enabled, we overwrite it despite the pipes are already split. This causes DML to think that MPC combine is used so we mistakenly enable MPC combine because we apply pipe split with ODM combine policy reset. This issue doesn't impact non windowed MPO with ODM case because the legacy policy has restricted use cases. We don't encounter the case where both ODM and FPO optimizations are enabled together. So we decide to leave it as is because it is about to be replaced anyway. Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Chaitanya Dhere Reviewed-by: Alvin Lee Acked-by: Hamza Mahfooz Signed-off-by: Wenjing Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 15 +++++++++++---- drivers/gpu/drm/amd/display/dc/inc/resource.h | 20 ++++++++------------ .../amd/display/dc/resource/dcn32/dcn32_resource.c | 16 +++++++++++++++- 3 files changed, 34 insertions(+), 17 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index dd781a20692e..ba76dd4a2ce2 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -1288,7 +1288,7 @@ static bool update_pipes_with_split_flags(struct dc *dc, struct dc_state *contex return updated; } -static bool should_allow_odm_power_optimization(struct dc *dc, +static bool should_apply_odm_power_optimization(struct dc *dc, struct dc_state *context, struct vba_vars_st *v, int *split, bool *merge) { @@ -1392,9 +1392,12 @@ static void try_odm_power_optimization_and_revalidate( { int i; unsigned int new_vlevel; + unsigned int cur_policy[MAX_PIPES]; - for (i = 0; i < pipe_cnt; i++) + for (i = 0; i < pipe_cnt; i++) { + cur_policy[i] = pipes[i].pipe.dest.odm_combine_policy; pipes[i].pipe.dest.odm_combine_policy = dm_odm_combine_policy_2to1; + } new_vlevel = dml_get_voltage_level(&context->bw_ctx.dml, pipes, pipe_cnt); @@ -1403,6 +1406,9 @@ static void try_odm_power_optimization_and_revalidate( memset(merge, 0, MAX_PIPES * sizeof(bool)); *vlevel = dcn20_validate_apply_pipe_split_flags(dc, context, new_vlevel, split, merge); context->bw_ctx.dml.vba.VoltageLevel = *vlevel; + } else { + for (i = 0; i < pipe_cnt; i++) + pipes[i].pipe.dest.odm_combine_policy = cur_policy[i]; } } @@ -1580,7 +1586,7 @@ static void dcn32_full_validate_bw_helper(struct dc *dc, } } - if (should_allow_odm_power_optimization(dc, context, vba, split, merge)) + if (should_apply_odm_power_optimization(dc, context, vba, split, merge)) try_odm_power_optimization_and_revalidate( dc, context, pipes, split, merge, vlevel, *pipe_cnt); @@ -2209,7 +2215,8 @@ bool dcn32_internal_validate_bw(struct dc *dc, int i; pipe_cnt = dc->res_pool->funcs->populate_dml_pipes(dc, context, pipes, fast_validate); - dcn32_update_dml_pipes_odm_policy_based_on_context(dc, context, pipes); + if (!dc->config.enable_windowed_mpo_odm) + dcn32_update_dml_pipes_odm_policy_based_on_context(dc, context, pipes); /* repopulate_pipes = 1 means the pipes were either split or merged. In this case * we have to re-calculate the DET allocation and run through DML once more to diff --git a/drivers/gpu/drm/amd/display/dc/inc/resource.h b/drivers/gpu/drm/amd/display/dc/inc/resource.h index c958ef37b78a..77a60aa9f27b 100644 --- a/drivers/gpu/drm/amd/display/dc/inc/resource.h +++ b/drivers/gpu/drm/amd/display/dc/inc/resource.h @@ -427,22 +427,18 @@ struct pipe_ctx *resource_get_primary_dpp_pipe(const struct pipe_ctx *dpp_pipe); int resource_get_mpc_slice_index(const struct pipe_ctx *dpp_pipe); /* - * Get number of MPC "cuts" of the plane associated with the pipe. MPC slice - * count is equal to MPC splits + 1. For example if a plane is cut 3 times, it - * will have 4 pieces of slice. - * return - 0 if pipe is not used for a plane with MPCC combine. otherwise - * the number of MPC "cuts" for the plane. + * Get the number of MPC slices associated with the pipe. + * The function returns 0 if the pipe is not associated with an MPC combine + * pipe topology. */ -int resource_get_mpc_slice_count(const struct pipe_ctx *opp_head); +int resource_get_mpc_slice_count(const struct pipe_ctx *pipe); /* - * Get number of ODM "cuts" of the timing associated with the pipe. ODM slice - * count is equal to ODM splits + 1. For example if a timing is cut 3 times, it - * will have 4 pieces of slice. - * return - 0 if pipe is not used for ODM combine. otherwise - * the number of ODM "cuts" for the timing. + * Get the number of ODM slices associated with the pipe. + * The function returns 0 if the pipe is not associated with an ODM combine + * pipe topology. */ -int resource_get_odm_slice_count(const struct pipe_ctx *otg_master); +int resource_get_odm_slice_count(const struct pipe_ctx *pipe); /* Get the ODM slice index counting from 0 from left most slice */ int resource_get_odm_slice_index(const struct pipe_ctx *opp_head); diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c index c4d71e7f18af..6f10052caeef 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn32/dcn32_resource.c @@ -1829,7 +1829,21 @@ int dcn32_populate_dml_pipes_from_context( dcn32_zero_pipe_dcc_fraction(pipes, pipe_cnt); DC_FP_END(); pipes[pipe_cnt].pipe.dest.vfront_porch = timing->v_front_porch; - pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal; + if (dc->config.enable_windowed_mpo_odm && + dc->debug.enable_single_display_2to1_odm_policy) { + switch (resource_get_odm_slice_count(pipe)) { + case 2: + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_2to1; + break; + case 4: + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_4to1; + break; + default: + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal; + } + } else { + pipes[pipe_cnt].pipe.dest.odm_combine_policy = dm_odm_combine_policy_dal; + } pipes[pipe_cnt].pipe.src.gpuvm_min_page_size_kbytes = 256; // according to spreadsheet pipes[pipe_cnt].pipe.src.unbounded_req_mode = false; pipes[pipe_cnt].pipe.scale_ratio_depth.lb_depth = dm_lb_19; -- cgit v1.2.3-70-g09d2 From 280df4996c2bfc0e340ae758ab6da35748853a7e Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 23 Jan 2024 12:20:06 -0500 Subject: drm/amd/display: Increase eval/entry delay for DCN35 [Why] To match firmware measurements and avoid hanging when accessing HW that's in idle. [How] Increase the delays to what we've measured. Reviewed-by: Ovidiu Bunea Acked-by: Hamza Mahfooz Signed-off-by: Nicholas Kazlauskas Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c index 761ec9891875..2142cee6cac2 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c @@ -780,8 +780,8 @@ static const struct dc_debug_options debug_defaults_drv = { .disable_z10 = false, .ignore_pg = true, .psp_disabled_wa = true, - .ips2_eval_delay_us = 200, - .ips2_entry_delay_us = 400, + .ips2_eval_delay_us = 1650, + .ips2_entry_delay_us = 800, .static_screen_wait_frames = 2, }; -- cgit v1.2.3-70-g09d2 From e6a7df96facdcf5b1f71eb3ec26f2f9f6ad61e57 Mon Sep 17 00:00:00 2001 From: Fangzhi Zuo Date: Mon, 22 Jan 2024 13:43:46 -0500 Subject: drm/amd/display: Fix MST Null Ptr for RV The change try to fix below error specific to RV platform: BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2 Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022 RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 Call Trace: ? __die+0x23/0x70 ? page_fault_oops+0x171/0x4e0 ? plist_add+0xbe/0x100 ? exc_page_fault+0x7c/0x180 ? asm_exc_page_fault+0x26/0x30 ? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] ? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026] compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] ? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] drm_atomic_check_only+0x5c5/0xa40 drm_mode_atomic_ioctl+0x76e/0xbc0 ? _copy_to_user+0x25/0x30 ? drm_ioctl+0x296/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 drm_ioctl_kernel+0xcd/0x170 drm_ioctl+0x26d/0x4b0 ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 amdgpu_drm_ioctl+0x4e/0x90 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054] __x64_sys_ioctl+0x94/0xd0 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f4dad17f76f Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c> RSP: 002b:00007ffd9ae859f0 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055e255a55900 RCX: 00007f4dad17f76f RDX: 00007ffd9ae85a90 RSI: 00000000c03864bc RDI: 000000000000000b RBP: 00007ffd9ae85a90 R08: 0000000000000003 R09: 0000000000000003 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000c03864bc R13: 000000000000000b R14: 000055e255a7fc60 R15: 000055e255a01eb0 Modules linked in: rfcomm snd_seq_dummy snd_hrtimer snd_seq snd_seq_device ccm cmac algif_hash algif_skcipher af_alg joydev mousedev bnep > typec libphy k10temp ipmi_msghandler roles i2c_scmi acpi_cpufreq mac_hid nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_mas> CR2: 0000000000000008 ---[ end trace 0000000000000000 ]--- RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper] Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8> RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224 RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280 RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850 R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000 R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224 FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0 With a second DP monitor connected, drm_atomic_state in dm atomic check sequence does not include the connector state for the old/existing/first DP monitor. In such case, dsc determination policy would hit a null ptr when it tries to iterate the old/existing stream that does not have a valid connector state attached to it. When that happens, dm atomic check should call drm_atomic_get_connector_state for a new connector state. Existing dm has already done that, except for RV due to it does not have official support of dsc where .num_dsc is not defined in dcn10 resource cap, that prevent from getting drm_atomic_get_connector_state called. So, skip dsc determination policy for ASICs that don't have DSC support. Cc: stable@vger.kernel.org # 6.1+ Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2314 Reviewed-by: Wayne Lin Acked-by: Hamza Mahfooz Signed-off-by: Fangzhi Zuo Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d292f290cd6e..59d2eee72a32 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -10731,11 +10731,13 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev, goto fail; } - ret = compute_mst_dsc_configs_for_state(state, dm_state->context, vars); - if (ret) { - DRM_DEBUG_DRIVER("compute_mst_dsc_configs_for_state() failed\n"); - ret = -EINVAL; - goto fail; + if (dc_resource_is_dsc_encoding_supported(dc)) { + ret = compute_mst_dsc_configs_for_state(state, dm_state->context, vars); + if (ret) { + DRM_DEBUG_DRIVER("compute_mst_dsc_configs_for_state() failed\n"); + ret = -EINVAL; + goto fail; + } } ret = dm_update_mst_vcpi_slots_for_dsc(state, dm_state->context, vars); -- cgit v1.2.3-70-g09d2 From ca8179ba11f211cdcb6c12ddd83814eaec999738 Mon Sep 17 00:00:00 2001 From: Alvin Lee Date: Fri, 26 Jan 2024 16:47:20 -0500 Subject: drm/amd/display: Update phantom pipe enable / disable sequence Previously we would call apply_ctx_to_hw to enable and disable phantom pipes. However, apply_ctx_to_hw can potentially update non-phantom pipes as well which is undesired. Instead of calling apply_ctx_to_hw as a whole, call the relevant helpers for each phantom pipe when enabling / disabling which will avoid us modifying hardware state for non-phantom pipes unknowingly. The use case is for an FRL display where FRL_Update is requested by the display. In this case link_state_valid flag is cleared in a passive callback thread and should be handled in the next stream / link update. However, due to the call to apply_ctx_to_hw for the phantom pipes during a flip, the main pipes were modified outside of the desired sequence (driver does not handle link_state_valid = 0 on flips). Cc: stable@vger.kernel.org # 6.6+ Reviewed-by: Samson Tam Acked-by: Hamza Mahfooz Signed-off-by: Alvin Lee Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc.c | 4 +- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.c | 4 +- .../drm/amd/display/dc/hwss/dce110/dce110_hwseq.h | 4 ++ .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c | 2 +- .../drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.h | 4 ++ .../drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c | 76 +++++++++++++++++++--- .../drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h | 2 + .../gpu/drm/amd/display/dc/hwss/dcn32/dcn32_init.c | 3 + drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h | 1 + .../drm/amd/display/dc/hwss/hw_sequencer_private.h | 7 ++ 10 files changed, 94 insertions(+), 13 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index aa7c02ba948e..2c424e435962 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -3817,7 +3817,9 @@ static void commit_planes_for_stream(struct dc *dc, * programming has completed (we turn on phantom OTG in order * to complete the plane disable for phantom pipes). */ - dc->hwss.apply_ctx_to_hw(dc, context); + + if (dc->hwss.disable_phantom_streams) + dc->hwss.disable_phantom_streams(dc, context); } if (update_type != UPDATE_TYPE_FAST) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c index 2352428bcea3..01493c49bd7a 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c @@ -1476,7 +1476,7 @@ static enum dc_status dce110_enable_stream_timing( return DC_OK; } -static enum dc_status apply_single_controller_ctx_to_hw( +enum dc_status dce110_apply_single_controller_ctx_to_hw( struct pipe_ctx *pipe_ctx, struct dc_state *context, struct dc *dc) @@ -2302,7 +2302,7 @@ enum dc_status dce110_apply_ctx_to_hw( if (pipe_ctx->top_pipe || pipe_ctx->prev_odm_pipe) continue; - status = apply_single_controller_ctx_to_hw( + status = dce110_apply_single_controller_ctx_to_hw( pipe_ctx, context, dc); diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.h b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.h index 08028a1779ae..ed3cc3648e8e 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.h @@ -39,6 +39,10 @@ enum dc_status dce110_apply_ctx_to_hw( struct dc *dc, struct dc_state *context); +enum dc_status dce110_apply_single_controller_ctx_to_hw( + struct pipe_ctx *pipe_ctx, + struct dc_state *context, + struct dc *dc); void dce110_enable_stream(struct pipe_ctx *pipe_ctx); diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c index 4853ecac53f9..931ac8ed7069 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c @@ -2561,7 +2561,7 @@ void dcn20_setup_vupdate_interrupt(struct dc *dc, struct pipe_ctx *pipe_ctx) tg->funcs->setup_vertical_interrupt2(tg, start_line); } -static void dcn20_reset_back_end_for_pipe( +void dcn20_reset_back_end_for_pipe( struct dc *dc, struct pipe_ctx *pipe_ctx, struct dc_state *context) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.h b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.h index b94c85340abf..d950b3e54ec2 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.h @@ -84,6 +84,10 @@ enum dc_status dcn20_enable_stream_timing( void dcn20_disable_stream_gating(struct dc *dc, struct pipe_ctx *pipe_ctx); void dcn20_enable_stream_gating(struct dc *dc, struct pipe_ctx *pipe_ctx); void dcn20_setup_vupdate_interrupt(struct dc *dc, struct pipe_ctx *pipe_ctx); +void dcn20_reset_back_end_for_pipe( + struct dc *dc, + struct pipe_ctx *pipe_ctx, + struct dc_state *context); void dcn20_init_blank( struct dc *dc, struct timing_generator *tg); diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c index 6c9299c7683d..aa36d7a56ca8 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.c @@ -1474,9 +1474,44 @@ void dcn32_update_dsc_pg(struct dc *dc, } } +void dcn32_disable_phantom_streams(struct dc *dc, struct dc_state *context) +{ + struct dce_hwseq *hws = dc->hwseq; + int i; + + for (i = dc->res_pool->pipe_count - 1; i >= 0 ; i--) { + struct pipe_ctx *pipe_ctx_old = + &dc->current_state->res_ctx.pipe_ctx[i]; + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + + if (!pipe_ctx_old->stream) + continue; + + if (dc_state_get_pipe_subvp_type(dc->current_state, pipe_ctx_old) != SUBVP_PHANTOM) + continue; + + if (pipe_ctx_old->top_pipe || pipe_ctx_old->prev_odm_pipe) + continue; + + if (!pipe_ctx->stream || pipe_need_reprogram(pipe_ctx_old, pipe_ctx) || + (pipe_ctx->stream && dc_state_get_pipe_subvp_type(context, pipe_ctx) != SUBVP_PHANTOM)) { + struct clock_source *old_clk = pipe_ctx_old->clock_source; + + if (hws->funcs.reset_back_end_for_pipe) + hws->funcs.reset_back_end_for_pipe(dc, pipe_ctx_old, dc->current_state); + if (hws->funcs.enable_stream_gating) + hws->funcs.enable_stream_gating(dc, pipe_ctx_old); + if (old_clk) + old_clk->funcs->cs_power_down(old_clk); + } + } +} + void dcn32_enable_phantom_streams(struct dc *dc, struct dc_state *context) { unsigned int i; + enum dc_status status = DC_OK; + struct dce_hwseq *hws = dc->hwseq; for (i = 0; i < dc->res_pool->pipe_count; i++) { struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; @@ -1497,16 +1532,39 @@ void dcn32_enable_phantom_streams(struct dc *dc, struct dc_state *context) } } for (i = 0; i < dc->res_pool->pipe_count; i++) { - struct pipe_ctx *new_pipe = &context->res_ctx.pipe_ctx[i]; - - if (new_pipe->stream && dc_state_get_pipe_subvp_type(context, new_pipe) == SUBVP_PHANTOM) { - // If old context or new context has phantom pipes, apply - // the phantom timings now. We can't change the phantom - // pipe configuration safely without driver acquiring - // the DMCUB lock first. - dc->hwss.apply_ctx_to_hw(dc, context); - break; + struct pipe_ctx *pipe_ctx_old = + &dc->current_state->res_ctx.pipe_ctx[i]; + struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i]; + + if (pipe_ctx->stream == NULL) + continue; + + if (dc_state_get_pipe_subvp_type(context, pipe_ctx) != SUBVP_PHANTOM) + continue; + + if (pipe_ctx->stream == pipe_ctx_old->stream && + pipe_ctx->stream->link->link_state_valid) { + continue; } + + if (pipe_ctx_old->stream && !pipe_need_reprogram(pipe_ctx_old, pipe_ctx)) + continue; + + if (pipe_ctx->top_pipe || pipe_ctx->prev_odm_pipe) + continue; + + if (hws->funcs.apply_single_controller_ctx_to_hw) + status = hws->funcs.apply_single_controller_ctx_to_hw( + pipe_ctx, + context, + dc); + + ASSERT(status == DC_OK); + +#ifdef CONFIG_DRM_AMD_DC_FP + if (hws->funcs.resync_fifo_dccg_dio) + hws->funcs.resync_fifo_dccg_dio(hws, dc, context); +#endif } } diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h index cecf7f0f5671..069e20bc87c0 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_hwseq.h @@ -111,6 +111,8 @@ void dcn32_update_dsc_pg(struct dc *dc, void dcn32_enable_phantom_streams(struct dc *dc, struct dc_state *context); +void dcn32_disable_phantom_streams(struct dc *dc, struct dc_state *context); + void dcn32_init_blank( struct dc *dc, struct timing_generator *tg); diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_init.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_init.c index 427cfc8c24a4..e8ac94a005b8 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_init.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn32/dcn32_init.c @@ -109,6 +109,7 @@ static const struct hw_sequencer_funcs dcn32_funcs = { .get_dcc_en_bits = dcn10_get_dcc_en_bits, .commit_subvp_config = dcn32_commit_subvp_config, .enable_phantom_streams = dcn32_enable_phantom_streams, + .disable_phantom_streams = dcn32_disable_phantom_streams, .subvp_pipe_control_lock = dcn32_subvp_pipe_control_lock, .update_visual_confirm_color = dcn10_update_visual_confirm_color, .subvp_pipe_control_lock_fast = dcn32_subvp_pipe_control_lock_fast, @@ -159,6 +160,8 @@ static const struct hwseq_private_funcs dcn32_private_funcs = { .set_pixels_per_cycle = dcn32_set_pixels_per_cycle, .resync_fifo_dccg_dio = dcn32_resync_fifo_dccg_dio, .is_dp_dig_pixel_rate_div_policy = dcn32_is_dp_dig_pixel_rate_div_policy, + .apply_single_controller_ctx_to_hw = dce110_apply_single_controller_ctx_to_hw, + .reset_back_end_for_pipe = dcn20_reset_back_end_for_pipe, }; void dcn32_hw_sequencer_init_functions(struct dc *dc) diff --git a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h index a54399383318..64ca7c66509b 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer.h @@ -379,6 +379,7 @@ struct hw_sequencer_funcs { struct dc_cursor_attributes *cursor_attr); void (*commit_subvp_config)(struct dc *dc, struct dc_state *context); void (*enable_phantom_streams)(struct dc *dc, struct dc_state *context); + void (*disable_phantom_streams)(struct dc *dc, struct dc_state *context); void (*subvp_pipe_control_lock)(struct dc *dc, struct dc_state *context, bool lock, diff --git a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer_private.h b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer_private.h index 6137cf09aa54..b3c62a82cb1c 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer_private.h +++ b/drivers/gpu/drm/amd/display/dc/hwss/hw_sequencer_private.h @@ -165,8 +165,15 @@ struct hwseq_private_funcs { void (*set_pixels_per_cycle)(struct pipe_ctx *pipe_ctx); void (*resync_fifo_dccg_dio)(struct dce_hwseq *hws, struct dc *dc, struct dc_state *context); + enum dc_status (*apply_single_controller_ctx_to_hw)( + struct pipe_ctx *pipe_ctx, + struct dc_state *context, + struct dc *dc); bool (*is_dp_dig_pixel_rate_div_policy)(struct pipe_ctx *pipe_ctx); #endif + void (*reset_back_end_for_pipe)(struct dc *dc, + struct pipe_ctx *pipe_ctx, + struct dc_state *context); }; struct dce_hwseq { -- cgit v1.2.3-70-g09d2 From 29c5da1a124671caa87c4a936c625432c16ad8ca Mon Sep 17 00:00:00 2001 From: Rodrigo Siqueira Date: Thu, 11 Jan 2024 14:25:27 -0700 Subject: drm/amd/display: Disable ODM by default for DCN35 Just ensure that ODM optimization is disabled by default. Acked-by: Hamza Mahfooz Signed-off-by: Rodrigo Siqueira Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c index 2142cee6cac2..1c3d89264ef7 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c @@ -2130,6 +2130,7 @@ static bool dcn35_resource_construct( dc->dml2_options.dcn_pipe_count = pool->base.pipe_count; dc->dml2_options.use_native_pstate_optimization = true; dc->dml2_options.use_native_soc_bb_construction = true; + dc->dml2_options.minimize_dispclk_using_odm = false; if (dc->config.EnableMinDispClkODM) dc->dml2_options.minimize_dispclk_using_odm = true; dc->dml2_options.enable_windowed_mpo_odm = dc->config.enable_windowed_mpo_odm; -- cgit v1.2.3-70-g09d2 From da48914e1fcdbf57f6b95d4552fcc088e6547ce4 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Fri, 2 Feb 2024 18:30:59 -0600 Subject: drm/amd/display: Clear phantom stream count and plane count When dc_state_destruct() was refactored the new phantom_stream_count and phantom_plane_count members weren't cleared. Fixes: 012a04b1d6af ("drm/amd/display: Refactor phantom resource allocation") Acked-by: Alex Deucher Signed-off-by: Mario Limonciello Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_state.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_state.c b/drivers/gpu/drm/amd/display/dc/core/dc_state.c index 88c6436b28b6..180ac47868c2 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_state.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_state.c @@ -291,11 +291,14 @@ void dc_state_destruct(struct dc_state *state) dc_stream_release(state->phantom_streams[i]); state->phantom_streams[i] = NULL; } + state->phantom_stream_count = 0; for (i = 0; i < state->phantom_plane_count; i++) { dc_plane_state_release(state->phantom_planes[i]); state->phantom_planes[i] = NULL; } + state->phantom_plane_count = 0; + state->stream_mask = 0; memset(&state->res_ctx, 0, sizeof(state->res_ctx)); memset(&state->pp_display_cfg, 0, sizeof(state->pp_display_cfg)); -- cgit v1.2.3-70-g09d2 From e63e35f0164c43fbc1adb481d6604f253b9f9667 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Mon, 5 Feb 2024 14:54:05 -0700 Subject: drm/amd/display: Increase frame-larger-than for all display_mode_vba files After a recent change in LLVM, allmodconfig (which has CONFIG_KCSAN=y and CONFIG_WERROR=y enabled) has a few new instances of -Wframe-larger-than for the mode support and system configuration functions: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20v2.c:3393:6: error: stack frame size (2144) exceeds limit (2048) in 'dml20v2_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3393 | void dml20v2_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn21/display_mode_vba_21.c:3520:6: error: stack frame size (2192) exceeds limit (2048) in 'dml21_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3520 | void dml21_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn20/display_mode_vba_20.c:3286:6: error: stack frame size (2128) exceeds limit (2048) in 'dml20_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] 3286 | void dml20_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) | ^ 1 error generated. Without the sanitizers enabled, there are no warnings. This was the catalyst for commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2") and that same change was made to dml in commit 5b750b22530f ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml") but the frame_warn_flag variable was not applied to all files. Do so now to clear up the warnings and make all these files consistent. Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issue/1990 Signed-off-by: Nathan Chancellor Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml/Makefile b/drivers/gpu/drm/amd/display/dc/dml/Makefile index 6042a5a6a44f..59ade76ffb18 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/Makefile +++ b/drivers/gpu/drm/amd/display/dc/dml/Makefile @@ -72,11 +72,11 @@ CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_lib.o := $(dml_ccflags) CFLAGS_$(AMDDALPATH)/dc/dml/display_mode_vba.o := $(dml_ccflags) CFLAGS_$(AMDDALPATH)/dc/dml/dcn10/dcn10_fpu.o := $(dml_ccflags) CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/dcn20_fpu.o := $(dml_ccflags) -CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20.o := $(dml_ccflags) +CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20.o := $(dml_ccflags) $(frame_warn_flag) CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_rq_dlg_calc_20.o := $(dml_ccflags) -CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20v2.o := $(dml_ccflags) +CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_mode_vba_20v2.o := $(dml_ccflags) $(frame_warn_flag) CFLAGS_$(AMDDALPATH)/dc/dml/dcn20/display_rq_dlg_calc_20v2.o := $(dml_ccflags) -CFLAGS_$(AMDDALPATH)/dc/dml/dcn21/display_mode_vba_21.o := $(dml_ccflags) +CFLAGS_$(AMDDALPATH)/dc/dml/dcn21/display_mode_vba_21.o := $(dml_ccflags) $(frame_warn_flag) CFLAGS_$(AMDDALPATH)/dc/dml/dcn21/display_rq_dlg_calc_21.o := $(dml_ccflags) CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_mode_vba_30.o := $(dml_ccflags) $(frame_warn_flag) CFLAGS_$(AMDDALPATH)/dc/dml/dcn30/display_rq_dlg_calc_30.o := $(dml_ccflags) -- cgit v1.2.3-70-g09d2 From 58fca355ad37dcb5f785d9095db5f748b79c5dc2 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Wed, 7 Feb 2024 10:20:57 +0530 Subject: drm/amd/display: Implement bounds check for stream encoder creation in DCN301 'stream_enc_regs' array is an array of dcn10_stream_enc_registers structures. The array is initialized with four elements, corresponding to the four calls to stream_enc_regs() in the array initializer. This means that valid indices for this array are 0, 1, 2, and 3. The error message 'stream_enc_regs' 4 <= 5 below, is indicating that there is an attempt to access this array with an index of 5, which is out of bounds. This could lead to undefined behavior Here, eng_id is used as an index to access the stream_enc_regs array. If eng_id is 5, this would result in an out-of-bounds access on the stream_enc_regs array. Thus fixing Buffer overflow error in dcn301_stream_encoder_create reported by Smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn301/dcn301_resource.c:1011 dcn301_stream_encoder_create() error: buffer overflow 'stream_enc_regs' 4 <= 5 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Roman Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/resource/dcn301/dcn301_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn301/dcn301_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn301/dcn301_resource.c index 511ff6b5b985..7538b548c572 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn301/dcn301_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn301/dcn301_resource.c @@ -999,7 +999,7 @@ static struct stream_encoder *dcn301_stream_encoder_create(enum engine_id eng_id vpg = dcn301_vpg_create(ctx, vpg_inst); afmt = dcn301_afmt_create(ctx, afmt_inst); - if (!enc1 || !vpg || !afmt) { + if (!enc1 || !vpg || !afmt || eng_id >= ARRAY_SIZE(stream_enc_regs)) { kfree(enc1); kfree(vpg); kfree(afmt); -- cgit v1.2.3-70-g09d2 From d16df040c8dad25c962b4404d2d534bfea327c6a Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Thu, 8 Feb 2024 16:23:29 -0500 Subject: drm/amdgpu: make damage clips support configurable We have observed that there are quite a number of PSR-SU panels on the market that are unable to keep up with what user space throws at them, resulting in hangs and random black screens. So, make damage clips support configurable and disable it by default for PSR-SU displays. Cc: stable@vger.kernel.org Reviewed-by: Mario Limonciello Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 13 +++++++++++++ drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++++ 3 files changed, 21 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 6dce81a061ab..517117a0796f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -200,6 +200,7 @@ extern uint amdgpu_dc_debug_mask; extern uint amdgpu_dc_visual_confirm; extern uint amdgpu_dm_abm_level; extern int amdgpu_backlight; +extern int amdgpu_damage_clips; extern struct amdgpu_mgpu_info mgpu_info; extern int amdgpu_ras_enable; extern uint amdgpu_ras_mask; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 211501ea9169..586f4d03039d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -211,6 +211,7 @@ int amdgpu_seamless = -1; /* auto */ uint amdgpu_debug_mask; int amdgpu_agp = -1; /* auto */ int amdgpu_wbrf = -1; +int amdgpu_damage_clips = -1; /* auto */ static void amdgpu_drv_delayed_reset_work_handler(struct work_struct *work); @@ -859,6 +860,18 @@ int amdgpu_backlight = -1; MODULE_PARM_DESC(backlight, "Backlight control (0 = pwm, 1 = aux, -1 auto (default))"); module_param_named(backlight, amdgpu_backlight, bint, 0444); +/** + * DOC: damageclips (int) + * Enable or disable damage clips support. If damage clips support is disabled, + * we will force full frame updates, irrespective of what user space sends to + * us. + * + * Defaults to -1 (where it is enabled unless a PSR-SU display is detected). + */ +MODULE_PARM_DESC(damageclips, + "Damage clips support (0 = disable, 1 = enable, -1 auto (default))"); +module_param_named(damageclips, amdgpu_damage_clips, int, 0444); + /** * DOC: tmz (int) * Trusted Memory Zone (TMZ) is a method to protect data being written diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 59d2eee72a32..d5ef07af9906 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5219,6 +5219,7 @@ static void fill_dc_dirty_rects(struct drm_plane *plane, struct drm_plane_state *new_plane_state, struct drm_crtc_state *crtc_state, struct dc_flip_addrs *flip_addrs, + bool is_psr_su, bool *dirty_regions_changed) { struct dm_crtc_state *dm_crtc_state = to_dm_crtc_state(crtc_state); @@ -5243,6 +5244,10 @@ static void fill_dc_dirty_rects(struct drm_plane *plane, num_clips = drm_plane_get_damage_clips_count(new_plane_state); clips = drm_plane_get_damage_clips(new_plane_state); + if (num_clips && (!amdgpu_damage_clips || (amdgpu_damage_clips < 0 && + is_psr_su))) + goto ffu; + if (!dm_crtc_state->mpo_requested) { if (!num_clips || num_clips > DC_MAX_DIRTY_RECTS) goto ffu; @@ -8298,6 +8303,8 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, fill_dc_dirty_rects(plane, old_plane_state, new_plane_state, new_crtc_state, &bundle->flip_addrs[planes_count], + acrtc_state->stream->link->psr_settings.psr_version == + DC_PSR_VERSION_SU_1, &dirty_rects_changed); /* -- cgit v1.2.3-70-g09d2 From 17ba9cde11c2bfebbd70867b0a2ac4a22e573379 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 9 Feb 2024 16:02:42 +0300 Subject: drm/amd/display: Fix && vs || typos These ANDs should be ORs or it will lead to a NULL dereference. Fixes: fb5a3d037082 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'") Fixes: 886571d217d7 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'") Reviewed-by: Anthony Koo Signed-off-by: Dan Carpenter Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c index 5c7f380a84f9..7252f5f781f0 100644 --- a/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn21/dcn21_hwseq.c @@ -211,7 +211,7 @@ void dcn21_set_pipe(struct pipe_ctx *pipe_ctx) struct dmcu *dmcu = pipe_ctx->stream->ctx->dc->res_pool->dmcu; uint32_t otg_inst; - if (!abm && !tg && !panel_cntl) + if (!abm || !tg || !panel_cntl) return; otg_inst = tg->inst; @@ -245,7 +245,7 @@ bool dcn21_set_backlight_level(struct pipe_ctx *pipe_ctx, struct panel_cntl *panel_cntl = pipe_ctx->stream->link->panel_cntl; uint32_t otg_inst; - if (!abm && !tg && !panel_cntl) + if (!abm || !tg || !panel_cntl) return false; otg_inst = tg->inst; -- cgit v1.2.3-70-g09d2 From 7edb5830ecb0033184ee2fa01ae8af17d56450ec Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Mon, 5 Feb 2024 16:07:36 +0530 Subject: drm/amd/display: Initialize 'wait_time_microsec' variable in link_dp_training_dpia.c wait_time_microsec = max(wait_time_microsec, (uint32_t) DPIA_CLK_SYNC_DELAY); Above line is trying to assign the maximum value between 'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec. However, 'wait_time_microsec' has not been assigned a value before this line, initialize 'wait_time_microsec' at the point of declaration. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'. Fixes: 630168a97314 ("drm/amd/display: move dp link training logic to link_dp_training") Cc: Wenjing Liu Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Roman Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_dpia.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_dpia.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_dpia.c index e8dda44b23cb..5d36bab0029c 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_dpia.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training_dpia.c @@ -619,7 +619,7 @@ static enum link_training_result dpia_training_eq_non_transparent( uint32_t retries_eq = 0; enum dc_status status; enum dc_dp_training_pattern tr_pattern; - uint32_t wait_time_microsec; + uint32_t wait_time_microsec = 0; enum dc_lane_count lane_count = lt_settings->link_settings.lane_count; union lane_align_status_updated dpcd_lane_status_updated = {0}; union lane_status dpcd_lane_status[LANE_COUNT_DP_MAX] = {0}; -- cgit v1.2.3-70-g09d2 From 88c6d84dd8f70e498f89972449e6ebb7aa1309c0 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Mon, 5 Feb 2024 15:07:02 +0530 Subject: drm/amd/display: Fix possible use of uninitialized 'max_chunks_fbc_mode' in 'calculate_bandwidth()' 'max_chunks_fbc_mode' is only declared and assigned a value under a specific condition in the following lines: if (data->fbc_en[i] == 1) { max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin; } If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode will not be initialized if it's used outside of this for loop. Ensure that 'max_chunks_fbc_mode' is properly initialized before it's used. Initialize it to a default value right after its declaration to ensure that it gets a value assigned under all possible control flow paths. Thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'. Fixes: 4562236b3bc0 ("drm/amd/dc: Add dc display driver (v2)") Cc: Harry Wentland Cc: Alex Deucher Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Roman Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c index f2dfa96f9ef5..39530b2ea495 100644 --- a/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c +++ b/drivers/gpu/drm/amd/display/dc/basics/dce_calcs.c @@ -94,7 +94,7 @@ static void calculate_bandwidth( const uint32_t s_high = 7; const uint32_t dmif_chunk_buff_margin = 1; - uint32_t max_chunks_fbc_mode; + uint32_t max_chunks_fbc_mode = 0; int32_t num_cursor_lines; int32_t i, j, k; -- cgit v1.2.3-70-g09d2 From ccc514b7e7acbd301219cbaec0fc0bfe5741acee Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Mon, 5 Feb 2024 16:54:10 +0530 Subject: drm/amd/display: Fix possible buffer overflow in 'find_dcfclk_for_voltage()' when 'find_dcfclk_for_voltage()' function is looping over VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7). When the loop variable i reaches 7, the function tries to access clock_table->DcfClocks[7]. However, since the size of the DcfClocks array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of the array, leading to a buffer overflow. Reported by smatch & thus fixing the below: drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7 Fixes: 3a83e4e64bb1 ("drm/amd/display: Add dcn3.01 support to DC (v2)") Cc: Roman Li Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Roman Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c index a5489fe6875f..aa9fd1dc550a 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn301/vg_clk_mgr.c @@ -546,6 +546,8 @@ static unsigned int find_dcfclk_for_voltage(const struct vg_dpm_clocks *clock_ta int i; for (i = 0; i < VG_NUM_SOC_VOLTAGE_LEVELS; i++) { + if (i >= VG_NUM_DCFCLK_DPM_LEVELS) + break; if (clock_table->SocVoltage[i] == voltage) return clock_table->DcfClocks[i]; } -- cgit v1.2.3-70-g09d2 From 94b38b895dec8c0ef093140a141e191b60ff614c Mon Sep 17 00:00:00 2001 From: Zhikai Zhai Date: Mon, 29 Jan 2024 17:02:18 +0800 Subject: drm/amd/display: Add align done check [WHY] We Double-check link status if training successful, but miss the lane align status. [HOW] Add the lane align status check Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Wenjing Liu Acked-by: Aurabindo Pillai Signed-off-by: Zhikai Zhai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c index 5a0b04518956..16a62e018712 100644 --- a/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c +++ b/drivers/gpu/drm/amd/display/dc/link/protocols/link_dp_training.c @@ -517,6 +517,7 @@ enum link_training_result dp_check_link_loss_status( { enum link_training_result status = LINK_TRAINING_SUCCESS; union lane_status lane_status; + union lane_align_status_updated dpcd_lane_status_updated; uint8_t dpcd_buf[6] = {0}; uint32_t lane; @@ -532,10 +533,12 @@ enum link_training_result dp_check_link_loss_status( * check lanes status */ lane_status.raw = dp_get_nibble_at_index(&dpcd_buf[2], lane); + dpcd_lane_status_updated.raw = dpcd_buf[4]; if (!lane_status.bits.CHANNEL_EQ_DONE_0 || !lane_status.bits.CR_DONE_0 || - !lane_status.bits.SYMBOL_LOCKED_0) { + !lane_status.bits.SYMBOL_LOCKED_0 || + !dp_is_interlane_aligned(dpcd_lane_status_updated)) { /* if one of the channel equalization, clock * recovery or symbol lock is dropped * consider it as (link has been -- cgit v1.2.3-70-g09d2 From a538dabf772c169641e151834e161e241802ab33 Mon Sep 17 00:00:00 2001 From: Sohaib Nadeem Date: Mon, 29 Jan 2024 17:33:40 -0500 Subject: Revert "drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz" [why]: This reverts commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a. The commit caused corruption when running some applications in fullscreen Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee Acked-by: Aurabindo Pillai Signed-off-by: Sohaib Nadeem Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index ba76dd4a2ce2..a0a65e099104 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -2760,7 +2760,7 @@ static int build_synthetic_soc_states(bool disable_dc_mode_overwrite, struct clk struct _vcs_dpi_voltage_scaling_st entry = {0}; struct clk_limit_table_entry max_clk_data = {0}; - unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599; + unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299; static const unsigned int num_dcfclk_stas = 5; unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564}; -- cgit v1.2.3-70-g09d2 From a589fa17cc4456df75f16fa3b49e8da0112e5100 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Tue, 6 Feb 2024 09:34:25 +0530 Subject: drm/amd/display: Fix possible NULL dereference on device remove/driver unload As part of a cleanup amdgpu_dm_fini() function, which is typically called when a device is being shut down or a driver is being unloaded The below error message suggests that there is a potential null pointer dereference issue with adev->dm.dc. In the below, line of code where adev->dm.dc is used without a preceding null check: for (i = 0; i < adev->dm.dc->caps.max_links; i++) { To fix this issue, add a null check for adev->dm.dc before this line. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943) Fixes: 006c26a0f1c8 ("drm/amd/display: Fix crash on device remove/driver unload") Cc: Andrey Grodzovsky Cc: Harry Wentland Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Signed-off-by: Srinivasan Shanmugam Reviewed-by: Roman Li Reviewed-by: Aurabindo Pillai Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d5ef07af9906..e0f121b221f5 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -1956,7 +1956,7 @@ static void amdgpu_dm_fini(struct amdgpu_device *adev) &adev->dm.dmub_bo_gpu_addr, &adev->dm.dmub_bo_cpu_addr); - if (adev->dm.hpd_rx_offload_wq) { + if (adev->dm.hpd_rx_offload_wq && adev->dm.dc) { for (i = 0; i < adev->dm.dc->caps.max_links; i++) { if (adev->dm.hpd_rx_offload_wq[i].wq) { destroy_workqueue(adev->dm.hpd_rx_offload_wq[i].wq); -- cgit v1.2.3-70-g09d2 From deb110292180cd501f6fde2a0178d65fcbcabb0c Mon Sep 17 00:00:00 2001 From: Tom Chung Date: Tue, 30 Jan 2024 15:34:08 +0800 Subject: drm/amd/display: Preserve original aspect ratio in create stream [Why] The original picture aspect ratio in mode struct may have chance be overwritten with wrong aspect ratio data in create_stream_for_sink(). It will create a different VIC output and cause HDMI compliance test failed. [How] Preserve the original picture aspect ratio data during create the stream. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Aurabindo Pillai Signed-off-by: Tom Chung Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index e0f121b221f5..cf875751971f 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6199,7 +6199,9 @@ create_stream_for_sink(struct drm_connector *connector, if (recalculate_timing) { freesync_mode = get_highest_refresh_rate_mode(aconnector, false); drm_mode_copy(&saved_mode, &mode); + saved_mode.picture_aspect_ratio = mode.picture_aspect_ratio; drm_mode_copy(&mode, freesync_mode); + mode.picture_aspect_ratio = saved_mode.picture_aspect_ratio; } else { decide_crtc_timing_for_drm_display_mode( &mode, preferred_mode, scale); -- cgit v1.2.3-70-g09d2 From 46806e59a87790760870d216f54951a5b4d545bc Mon Sep 17 00:00:00 2001 From: Roman Li Date: Tue, 30 Jan 2024 18:07:24 -0500 Subject: drm/amd/display: Fix array-index-out-of-bounds in dcn35_clkmgr [Why] There is a potential memory access violation while iterating through array of dcn35 clks. [How] Limit iteration per array size. Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Aurabindo Pillai Signed-off-by: Roman Li Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- .../gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 14cec1c7b718..e64890259235 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -655,10 +655,13 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk struct clk_limit_table_entry def_max = bw_params->clk_table.entries[bw_params->clk_table.num_entries - 1]; uint32_t max_fclk = 0, min_pstate = 0, max_dispclk = 0, max_dppclk = 0; uint32_t max_pstate = 0, max_dram_speed_mts = 0, min_dram_speed_mts = 0; + uint32_t num_memps, num_fclk, num_dcfclk; int i; /* Determine min/max p-state values. */ - for (i = 0; i < clock_table->NumMemPstatesEnabled; i++) { + num_memps = (clock_table->NumMemPstatesEnabled > NUM_MEM_PSTATE_LEVELS) ? NUM_MEM_PSTATE_LEVELS : + clock_table->NumMemPstatesEnabled; + for (i = 0; i < num_memps; i++) { uint32_t dram_speed_mts = calc_dram_speed_mts(&clock_table->MemPstateTable[i]); if (is_valid_clock_value(dram_speed_mts) && dram_speed_mts > max_dram_speed_mts) { @@ -670,7 +673,7 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk min_dram_speed_mts = max_dram_speed_mts; min_pstate = max_pstate; - for (i = 0; i < clock_table->NumMemPstatesEnabled; i++) { + for (i = 0; i < num_memps; i++) { uint32_t dram_speed_mts = calc_dram_speed_mts(&clock_table->MemPstateTable[i]); if (is_valid_clock_value(dram_speed_mts) && dram_speed_mts < min_dram_speed_mts) { @@ -699,9 +702,13 @@ static void dcn35_clk_mgr_helper_populate_bw_params(struct clk_mgr_internal *clk /* Base the clock table on dcfclk, need at least one entry regardless of pmfw table */ ASSERT(clock_table->NumDcfClkLevelsEnabled > 0); - max_fclk = find_max_clk_value(clock_table->FclkClocks_Freq, clock_table->NumFclkLevelsEnabled); + num_fclk = (clock_table->NumFclkLevelsEnabled > NUM_FCLK_DPM_LEVELS) ? NUM_FCLK_DPM_LEVELS : + clock_table->NumFclkLevelsEnabled; + max_fclk = find_max_clk_value(clock_table->FclkClocks_Freq, num_fclk); - for (i = 0; i < clock_table->NumDcfClkLevelsEnabled; i++) { + num_dcfclk = (clock_table->NumFclkLevelsEnabled > NUM_DCFCLK_DPM_LEVELS) ? NUM_DCFCLK_DPM_LEVELS : + clock_table->NumDcfClkLevelsEnabled; + for (i = 0; i < num_dcfclk; i++) { int j; /* First search defaults for the clocks we don't read using closest lower or equal default dcfclk */ -- cgit v1.2.3-70-g09d2 From 0484e05d048b66d01d1f3c1d2306010bb57d8738 Mon Sep 17 00:00:00 2001 From: Sohaib Nadeem Date: Wed, 31 Jan 2024 16:40:37 -0500 Subject: drm/amd/display: fixed integer types and null check locations [why]: issues fixed: - comparison with wider integer type in loop condition which can cause infinite loops - pointer dereference before null check Cc: Mario Limonciello Cc: Alex Deucher Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic Acked-by: Aurabindo Pillai Signed-off-by: Sohaib Nadeem Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c | 16 ++++++++++------ drivers/gpu/drm/amd/display/dc/link/link_validation.c | 2 +- 2 files changed, 11 insertions(+), 7 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c index 960c4b4f6ddf..05f392501c0a 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser2.c @@ -1850,19 +1850,21 @@ static enum bp_result get_firmware_info_v3_2( /* Vega12 */ smu_info_v3_2 = GET_IMAGE(struct atom_smu_info_v3_2, DATA_TABLES(smu_info)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_2->gpuclk_ss_percentage); if (!smu_info_v3_2) return BP_RESULT_BADBIOSTABLE; + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_2->gpuclk_ss_percentage); + info->default_engine_clk = smu_info_v3_2->bootup_dcefclk_10khz * 10; } else if (revision.minor == 3) { /* Vega20 */ smu_info_v3_3 = GET_IMAGE(struct atom_smu_info_v3_3, DATA_TABLES(smu_info)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_3->gpuclk_ss_percentage); if (!smu_info_v3_3) return BP_RESULT_BADBIOSTABLE; + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", smu_info_v3_3->gpuclk_ss_percentage); + info->default_engine_clk = smu_info_v3_3->bootup_dcefclk_10khz * 10; } @@ -2422,10 +2424,11 @@ static enum bp_result get_integrated_info_v11( info_v11 = GET_IMAGE(struct atom_integrated_system_info_v1_11, DATA_TABLES(integratedsysteminfo)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v11->gpuclk_ss_percentage); if (info_v11 == NULL) return BP_RESULT_BADBIOSTABLE; + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v11->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v11->gpucapinfo); /* @@ -2637,11 +2640,12 @@ static enum bp_result get_integrated_info_v2_1( info_v2_1 = GET_IMAGE(struct atom_integrated_system_info_v2_1, DATA_TABLES(integratedsysteminfo)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_1->gpuclk_ss_percentage); if (info_v2_1 == NULL) return BP_RESULT_BADBIOSTABLE; + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_1->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v2_1->gpucapinfo); /* @@ -2799,11 +2803,11 @@ static enum bp_result get_integrated_info_v2_2( info_v2_2 = GET_IMAGE(struct atom_integrated_system_info_v2_2, DATA_TABLES(integratedsysteminfo)); - DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_2->gpuclk_ss_percentage); - if (info_v2_2 == NULL) return BP_RESULT_BADBIOSTABLE; + DC_LOG_BIOS("gpuclk_ss_percentage (unit of 0.001 percent): %d\n", info_v2_2->gpuclk_ss_percentage); + info->gpu_cap_info = le32_to_cpu(info_v2_2->gpucapinfo); /* diff --git a/drivers/gpu/drm/amd/display/dc/link/link_validation.c b/drivers/gpu/drm/amd/display/dc/link/link_validation.c index 8fe66c367850..5b0bc7f6a188 100644 --- a/drivers/gpu/drm/amd/display/dc/link/link_validation.c +++ b/drivers/gpu/drm/amd/display/dc/link/link_validation.c @@ -361,7 +361,7 @@ bool link_validate_dpia_bandwidth(const struct dc_stream_state *stream, const un struct dc_link *dpia_link[MAX_DPIA_NUM] = {0}; int num_dpias = 0; - for (uint8_t i = 0; i < num_streams; ++i) { + for (unsigned int i = 0; i < num_streams; ++i) { if (stream[i].signal == SIGNAL_TYPE_DISPLAY_PORT) { /* new dpia sst stream, check whether it exceeds max dpia */ if (num_dpias >= MAX_DPIA_NUM) -- cgit v1.2.3-70-g09d2 From a82197e3a5f45450cbaf92095d8a51249dc44c79 Mon Sep 17 00:00:00 2001 From: Srinivasan Shanmugam Date: Sun, 11 Feb 2024 09:04:19 +0530 Subject: drm/amdgpu/display: Initialize gamma correction mode variable in dcn30_get_gamcor_current() The dcn30_get_gamcor_current() function is responsible for determining the current gamma correction mode used by the display controller. However, the 'mode' variable, which stores the gamma correction mode, was not initialized before its first usage, leading to an uninitialized symbol error. Thus initializes the 'mode' variable with a default value of LUT_BYPASS before the conditional statements in the function, improves code clarity and stability, ensuring correct behavior of the dcn30_get_gamcor_current() function in determining the gamma correction mode. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'. Fixes: 03f54d7d3448 ("drm/amd/display: Add DCN3 DPP") Cc: Bhawanpreet Lakha Cc: Rodrigo Siqueira Cc: Aurabindo Pillai Cc: Tom Chung Signed-off-by: Srinivasan Shanmugam Suggested-by: Roman Li Reviewed-by: Aurabindo Pillai Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c index e43f77c11c00..5f97a868ada3 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c +++ b/drivers/gpu/drm/amd/display/dc/dcn30/dcn30_dpp_cm.c @@ -56,16 +56,13 @@ static void dpp3_enable_cm_block( static enum dc_lut_mode dpp30_get_gamcor_current(struct dpp *dpp_base) { - enum dc_lut_mode mode; + enum dc_lut_mode mode = LUT_BYPASS; uint32_t state_mode; uint32_t lut_mode; struct dcn3_dpp *dpp = TO_DCN30_DPP(dpp_base); REG_GET(CM_GAMCOR_CONTROL, CM_GAMCOR_MODE_CURRENT, &state_mode); - if (state_mode == 0) - mode = LUT_BYPASS; - if (state_mode == 2) {//Programmable RAM LUT REG_GET(CM_GAMCOR_CONTROL, CM_GAMCOR_SELECT_CURRENT, &lut_mode); if (lut_mode == 0) -- cgit v1.2.3-70-g09d2 From 0d555e481c1333c8ae170198ca111947c22fc9c9 Mon Sep 17 00:00:00 2001 From: Nicholas Kazlauskas Date: Tue, 23 Jan 2024 12:20:06 -0500 Subject: drm/amd/display: Increase ips2_eval delay for DCN35 [Why] New worst-case measurement observed at 1897us. [How] Increase to 2000us to cover the new worst case + margin. Reviewed-by: Ovidiu Bunea Acked-by: Aurabindo Pillai Signed-off-by: Nicholas Kazlauskas Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/gpu/drm/amd/display') diff --git a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c index 1c3d89264ef7..5fdcda8f8602 100644 --- a/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c +++ b/drivers/gpu/drm/amd/display/dc/resource/dcn35/dcn35_resource.c @@ -780,7 +780,7 @@ static const struct dc_debug_options debug_defaults_drv = { .disable_z10 = false, .ignore_pg = true, .psp_disabled_wa = true, - .ips2_eval_delay_us = 1650, + .ips2_eval_delay_us = 2000, .ips2_entry_delay_us = 800, .static_screen_wait_frames = 2, }; -- cgit v1.2.3-70-g09d2