From 5df07b74f671d1dfc1d81c3e791c335183cfc515 Mon Sep 17 00:00:00 2001
From: Daniel Axtens <dja@axtens.net>
Date: Tue, 14 Apr 2015 15:23:25 +1000
Subject: Remove celleb-only SCC PATA drivers

The SCC PATA interface is only used by celleb.
celleb has been dropped [1], so drop the drivers.

[1] http://patchwork.ozlabs.org/patch/451730/

CC: "David S. Miller" <davem@davemloft.net>
CC: linux-ide@vger.kernel.org
CC: Valentin Rothberg <valentinrothberg@gmail.com>
CC: mpe@ellerman.id.au
CC: linuxppc-dev@lists.ozlab.org
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Tejun Heo <tj@kernel.org>
---
 drivers/ide/Kconfig    |   9 -
 drivers/ide/Makefile   |   1 -
 drivers/ide/scc_pata.c | 887 -------------------------------------------------
 3 files changed, 897 deletions(-)
 delete mode 100644 drivers/ide/scc_pata.c

(limited to 'drivers/ide')

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index a04c49f2a011..39ea67f9b066 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -643,15 +643,6 @@ config BLK_DEV_TC86C001
 	help
 	This driver adds support for Toshiba TC86C001 GOKU-S chip.
 
-config BLK_DEV_CELLEB
-	tristate "Toshiba's Cell Reference Set IDE support"
-	depends on PPC_CELLEB
-	select BLK_DEV_IDEDMA_PCI
-	help
-	  This driver provides support for the on-board IDE controller on
-	  Toshiba Cell Reference Board.
-	  If unsure, say Y.
-
 endif
 
 # TODO: BLK_DEV_IDEDMA_PCI -> BLK_DEV_IDEDMA_SFF
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index a04ee82f1c8f..2a8c417d4081 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -38,7 +38,6 @@ obj-$(CONFIG_BLK_DEV_AEC62XX)		+= aec62xx.o
 obj-$(CONFIG_BLK_DEV_ALI15X3)		+= alim15x3.o
 obj-$(CONFIG_BLK_DEV_AMD74XX)		+= amd74xx.o
 obj-$(CONFIG_BLK_DEV_ATIIXP)		+= atiixp.o
-obj-$(CONFIG_BLK_DEV_CELLEB)		+= scc_pata.o
 obj-$(CONFIG_BLK_DEV_CMD64X)		+= cmd64x.o
 obj-$(CONFIG_BLK_DEV_CS5520)		+= cs5520.o
 obj-$(CONFIG_BLK_DEV_CS5530)		+= cs5530.o
diff --git a/drivers/ide/scc_pata.c b/drivers/ide/scc_pata.c
deleted file mode 100644
index 2a2d188b5d5b..000000000000
--- a/drivers/ide/scc_pata.c
+++ /dev/null
@@ -1,887 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ide/pci/siimage.c:
- * Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003		Red Hat
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA            0x01b4
-
-#define SCC_PATA_NAME           "scc IDE"
-
-#define TDVHSEL_MASTER          0x00000001
-#define TDVHSEL_SLAVE           0x00000004
-
-#define MODE_JCUSFEN            0x00000080
-
-#define CCKCTRL_ATARESET        0x00040000
-#define CCKCTRL_BUFCNT          0x00020000
-#define CCKCTRL_CRST            0x00010000
-#define CCKCTRL_OCLKEN          0x00000100
-#define CCKCTRL_ATACLKOEN       0x00000002
-#define CCKCTRL_LCLKEN          0x00000001
-
-#define QCHCD_IOS_SS		0x00000001
-
-#define QCHSD_STPDIAG		0x00020000
-
-#define INTMASK_MSK             0xD1000012
-#define INTSTS_SERROR		0x80000000
-#define INTSTS_PRERR		0x40000000
-#define INTSTS_RERR		0x10000000
-#define INTSTS_ICERR		0x01000000
-#define INTSTS_BMSINT		0x00000010
-#define INTSTS_BMHE		0x00000008
-#define INTSTS_IOIRQS           0x00000004
-#define INTSTS_INTRQ            0x00000002
-#define INTSTS_ACTEINT          0x00000001
-
-#define ECMODE_VALUE 0x01
-
-static struct scc_ports {
-	unsigned long ctl, dma;
-	struct ide_host *host;	/* for removing port from system */
-} scc_ports[MAX_HWIFS];
-
-/* PIO transfer mode  table */
-/* JCHST */
-static unsigned long JCHSTtbl[2][7] = {
-	{0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00},   /* 100MHz */
-	{0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00}    /* 133MHz */
-};
-
-/* JCHHT */
-static unsigned long JCHHTtbl[2][7] = {
-	{0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00},   /* 100MHz */
-	{0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00}    /* 133MHz */
-};
-
-/* JCHCT */
-static unsigned long JCHCTtbl[2][7] = {
-	{0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00},   /* 100MHz */
-	{0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00}    /* 133MHz */
-};
-
-
-/* DMA transfer mode  table */
-/* JCHDCTM/JCHDCTS */
-static unsigned long JCHDCTxtbl[2][7] = {
-	{0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00},   /* 100MHz */
-	{0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00}    /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS  */
-static unsigned long JCSTWTxtbl[2][7] = {
-	{0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00},   /* 100MHz */
-	{0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
-};
-
-/* JCTSS */
-static unsigned long JCTSStbl[2][7] = {
-	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00},   /* 100MHz */
-	{0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05}    /* 133MHz */
-};
-
-/* JCENVT */
-static unsigned long JCENVTtbl[2][7] = {
-	{0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00},   /* 100MHz */
-	{0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02}    /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static unsigned long JCACTSELtbl[2][7] = {
-	{0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00},   /* 100MHz */
-	{0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01}    /* 133MHz */
-};
-
-
-static u8 scc_ide_inb(unsigned long port)
-{
-	u32 data = in_be32((void*)port);
-	return (u8)data;
-}
-
-static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
-	out_be32((void *)hwif->io_ports.command_addr, cmd);
-	eieio();
-	in_be32((void *)(hwif->dma_base + 0x01c));
-	eieio();
-}
-
-static u8 scc_read_status(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)hwif->io_ports.status_addr);
-}
-
-static u8 scc_read_altstatus(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
-}
-
-static u8 scc_dma_sff_read_status(ide_hwif_t *hwif)
-{
-	return (u8)in_be32((void *)(hwif->dma_base + 4));
-}
-
-static void scc_write_devctl(ide_hwif_t *hwif, u8 ctl)
-{
-	out_be32((void *)hwif->io_ports.ctl_addr, ctl);
-	eieio();
-	in_be32((void *)(hwif->dma_base + 0x01c));
-	eieio();
-}
-
-static void scc_ide_insw(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-	}
-}
-
-static void scc_ide_insl(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-		*ptr++ = le16_to_cpu(in_be32((void*)port));
-	}
-}
-
-static void scc_ide_outb(u8 addr, unsigned long port)
-{
-	out_be32((void*)port, addr);
-}
-
-static void
-scc_ide_outsw(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-	}
-}
-
-static void
-scc_ide_outsl(unsigned long port, void *addr, u32 count)
-{
-	u16 *ptr = (u16 *)addr;
-	while (count--) {
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-		out_be32((void*)port, cpu_to_le16(*ptr++));
-	}
-}
-
-/**
- *	scc_set_pio_mode	-	set host controller for PIO mode
- *	@hwif: port
- *	@drive: drive
- *
- *	Load the timing settings for this device mode into the
- *	controller.
- */
-
-static void scc_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct scc_ports *ports = ide_get_hwifdata(hwif);
-	unsigned long ctl_base = ports->ctl;
-	unsigned long cckctrl_port = ctl_base + 0xff0;
-	unsigned long piosht_port = ctl_base + 0x000;
-	unsigned long pioct_port = ctl_base + 0x004;
-	unsigned long reg;
-	int offset;
-	const u8 pio = drive->pio_mode - XFER_PIO_0;
-
-	reg = in_be32((void __iomem *)cckctrl_port);
-	if (reg & CCKCTRL_ATACLKOEN) {
-		offset = 1; /* 133MHz */
-	} else {
-		offset = 0; /* 100MHz */
-	}
-	reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
-	out_be32((void __iomem *)piosht_port, reg);
-	reg = JCHCTtbl[offset][pio];
-	out_be32((void __iomem *)pioct_port, reg);
-}
-
-/**
- *	scc_set_dma_mode	-	set host controller for DMA mode
- *	@hwif: port
- *	@drive: drive
- *
- *	Load the timing settings for this device mode into the
- *	controller.
- */
-
-static void scc_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
-{
-	struct scc_ports *ports = ide_get_hwifdata(hwif);
-	unsigned long ctl_base = ports->ctl;
-	unsigned long cckctrl_port = ctl_base + 0xff0;
-	unsigned long mdmact_port = ctl_base + 0x008;
-	unsigned long mcrcst_port = ctl_base + 0x00c;
-	unsigned long sdmact_port = ctl_base + 0x010;
-	unsigned long scrcst_port = ctl_base + 0x014;
-	unsigned long udenvt_port = ctl_base + 0x018;
-	unsigned long tdvhsel_port   = ctl_base + 0x020;
-	int is_slave = drive->dn & 1;
-	int offset, idx;
-	unsigned long reg;
-	unsigned long jcactsel;
-	const u8 speed = drive->dma_mode;
-
-	reg = in_be32((void __iomem *)cckctrl_port);
-	if (reg & CCKCTRL_ATACLKOEN) {
-		offset = 1; /* 133MHz */
-	} else {
-		offset = 0; /* 100MHz */
-	}
-
-	idx = speed - XFER_UDMA_0;
-
-	jcactsel = JCACTSELtbl[offset][idx];
-	if (is_slave) {
-		out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
-		out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
-		jcactsel = jcactsel << 2;
-		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
-	} else {
-		out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
-		out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
-		out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
-	}
-	reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
-	out_be32((void __iomem *)udenvt_port, reg);
-}
-
-static void scc_dma_host_set(ide_drive_t *drive, int on)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 unit = drive->dn & 1;
-	u8 dma_stat = scc_dma_sff_read_status(hwif);
-
-	if (on)
-		dma_stat |= (1 << (5 + unit));
-	else
-		dma_stat &= ~(1 << (5 + unit));
-
-	scc_ide_outb(dma_stat, hwif->dma_base + 4);
-}
-
-/**
- *	scc_dma_setup	-	begin a DMA phase
- *	@drive: target device
- *	@cmd: command
- *
- *	Build an IDE DMA PRD (IDE speak for scatter gather table)
- *	and then set up the DMA transfer registers.
- *
- *	Returns 0 on success. If a PIO fallback is required then 1
- *	is returned.
- */
-
-static int scc_dma_setup(ide_drive_t *drive, struct ide_cmd *cmd)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u32 rw = (cmd->tf_flags & IDE_TFLAG_WRITE) ? 0 : ATA_DMA_WR;
-	u8 dma_stat;
-
-	/* fall back to pio! */
-	if (ide_build_dmatable(drive, cmd) == 0)
-		return 1;
-
-	/* PRD table */
-	out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
-
-	/* specify r/w */
-	out_be32((void __iomem *)hwif->dma_base, rw);
-
-	/* read DMA status for INTR & ERROR flags */
-	dma_stat = scc_dma_sff_read_status(hwif);
-
-	/* clear INTR & ERROR flags */
-	out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
-
-	return 0;
-}
-
-static void scc_dma_start(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_cmd = scc_ide_inb(hwif->dma_base);
-
-	/* start DMA */
-	scc_ide_outb(dma_cmd | 1, hwif->dma_base);
-}
-
-static int __scc_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 dma_stat, dma_cmd;
-
-	/* get DMA command mode */
-	dma_cmd = scc_ide_inb(hwif->dma_base);
-	/* stop DMA */
-	scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
-	/* get DMA status */
-	dma_stat = scc_dma_sff_read_status(hwif);
-	/* clear the INTR & ERROR bits */
-	scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
-	/* verify good DMA status */
-	return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-/**
- *	scc_dma_end	-	Stop DMA
- *	@drive: IDE drive
- *
- *	Check and clear INT Status register.
- *	Then call __scc_dma_end().
- */
-
-static int scc_dma_end(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	void __iomem *dma_base = (void __iomem *)hwif->dma_base;
-	unsigned long intsts_port = hwif->dma_base + 0x014;
-	u32 reg;
-	int dma_stat, data_loss = 0;
-	static int retry = 0;
-
-	/* errata A308 workaround: Step5 (check data loss) */
-	/* We don't check non ide_disk because it is limited to UDMA4 */
-	if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
-	      & ATA_ERR) &&
-	    drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
-		reg = in_be32((void __iomem *)intsts_port);
-		if (!(reg & INTSTS_ACTEINT)) {
-			printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
-			       drive->name);
-			data_loss = 1;
-			if (retry++) {
-				struct request *rq = hwif->rq;
-				ide_drive_t *drive;
-				int i;
-
-				/* ERROR_RESET and drive->crc_count are needed
-				 * to reduce DMA transfer mode in retry process.
-				 */
-				if (rq)
-					rq->errors |= ERROR_RESET;
-
-				ide_port_for_each_dev(i, drive, hwif)
-					drive->crc_count++;
-			}
-		}
-	}
-
-	while (1) {
-		reg = in_be32((void __iomem *)intsts_port);
-
-		if (reg & INTSTS_SERROR) {
-			printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_PRERR) {
-			u32 maea0, maec0;
-			unsigned long ctl_base = hwif->config_data;
-
-			maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
-			maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
-
-			printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
-
-			out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_RERR) {
-			printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
-
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-			continue;
-		}
-
-		if (reg & INTSTS_ICERR) {
-			out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-
-			printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
-			continue;
-		}
-
-		if (reg & INTSTS_BMSINT) {
-			printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
-			out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
-
-			ide_do_reset(drive);
-			continue;
-		}
-
-		if (reg & INTSTS_BMHE) {
-			out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
-			continue;
-		}
-
-		if (reg & INTSTS_ACTEINT) {
-			out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
-			continue;
-		}
-
-		if (reg & INTSTS_IOIRQS) {
-			out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
-			continue;
-		}
-		break;
-	}
-
-	dma_stat = __scc_dma_end(drive);
-	if (data_loss)
-		dma_stat |= 2; /* emulate DMA error (to retry command) */
-	return dma_stat;
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int scc_dma_test_irq(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
-
-	/* SCC errata A252,A308 workaround: Step4 */
-	if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
-	     & ATA_ERR) &&
-	    (int_stat & INTSTS_INTRQ))
-		return 1;
-
-	/* SCC errata A308 workaround: Step5 (polling IOIRQS) */
-	if (int_stat & INTSTS_IOIRQS)
-		return 1;
-
-	return 0;
-}
-
-static u8 scc_udma_filter(ide_drive_t *drive)
-{
-	ide_hwif_t *hwif = drive->hwif;
-	u8 mask = hwif->ultra_mask;
-
-	/* errata A308 workaround: limit non ide_disk drive to UDMA4 */
-	if ((drive->media != ide_disk) && (mask & 0xE0)) {
-		printk(KERN_INFO "%s: limit %s to UDMA4\n",
-		       SCC_PATA_NAME, drive->name);
-		mask = ATA_UDMA4;
-	}
-
-	return mask;
-}
-
-/**
- *	setup_mmio_scc	-	map CTRL/BMID region
- *	@dev: PCI device we are configuring
- *	@name: device name
- *
- */
-
-static int setup_mmio_scc (struct pci_dev *dev, const char *name)
-{
-	void __iomem *ctl_addr;
-	void __iomem *dma_addr;
-	int i, ret;
-
-	for (i = 0; i < MAX_HWIFS; i++) {
-		if (scc_ports[i].ctl == 0)
-			break;
-	}
-	if (i >= MAX_HWIFS)
-		return -ENOMEM;
-
-	ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
-	if (ret < 0) {
-		printk(KERN_ERR "%s: can't reserve resources\n", name);
-		return ret;
-	}
-
-	ctl_addr = pci_ioremap_bar(dev, 0);
-	if (!ctl_addr)
-		goto fail_0;
-
-	dma_addr = pci_ioremap_bar(dev, 1);
-	if (!dma_addr)
-		goto fail_1;
-
-	pci_set_master(dev);
-	scc_ports[i].ctl = (unsigned long)ctl_addr;
-	scc_ports[i].dma = (unsigned long)dma_addr;
-	pci_set_drvdata(dev, (void *) &scc_ports[i]);
-
-	return 1;
-
- fail_1:
-	iounmap(ctl_addr);
- fail_0:
-	return -ENOMEM;
-}
-
-static int scc_ide_setup_pci_device(struct pci_dev *dev,
-				    const struct ide_port_info *d)
-{
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	struct ide_host *host;
-	struct ide_hw hw, *hws[] = { &hw };
-	int i, rc;
-
-	memset(&hw, 0, sizeof(hw));
-	for (i = 0; i <= 8; i++)
-		hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
-	hw.irq = dev->irq;
-	hw.dev = &dev->dev;
-
-	rc = ide_host_add(d, hws, 1, &host);
-	if (rc)
-		return rc;
-
-	ports->host = host;
-
-	return 0;
-}
-
-/**
- *	init_setup_scc	-	set up an SCC PATA Controller
- *	@dev: PCI device
- *	@d: IDE port info
- *
- *	Perform the initial set up for this device.
- */
-
-static int init_setup_scc(struct pci_dev *dev, const struct ide_port_info *d)
-{
-	unsigned long ctl_base;
-	unsigned long dma_base;
-	unsigned long cckctrl_port;
-	unsigned long intmask_port;
-	unsigned long mode_port;
-	unsigned long ecmode_port;
-	u32 reg = 0;
-	struct scc_ports *ports;
-	int rc;
-
-	rc = pci_enable_device(dev);
-	if (rc)
-		goto end;
-
-	rc = setup_mmio_scc(dev, d->name);
-	if (rc < 0)
-		goto end;
-
-	ports = pci_get_drvdata(dev);
-	ctl_base = ports->ctl;
-	dma_base = ports->dma;
-	cckctrl_port = ctl_base + 0xff0;
-	intmask_port = dma_base + 0x010;
-	mode_port = ctl_base + 0x024;
-	ecmode_port = ctl_base + 0xf00;
-
-	/* controller initialization */
-	reg = 0;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_ATACLKOEN;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
-	out_be32((void*)cckctrl_port, reg);
-	reg |= CCKCTRL_CRST;
-	out_be32((void*)cckctrl_port, reg);
-
-	for (;;) {
-		reg = in_be32((void*)cckctrl_port);
-		if (reg & CCKCTRL_CRST)
-			break;
-		udelay(5000);
-	}
-
-	reg |= CCKCTRL_ATARESET;
-	out_be32((void*)cckctrl_port, reg);
-
-	out_be32((void*)ecmode_port, ECMODE_VALUE);
-	out_be32((void*)mode_port, MODE_JCUSFEN);
-	out_be32((void*)intmask_port, INTMASK_MSK);
-
-	rc = scc_ide_setup_pci_device(dev, d);
-
- end:
-	return rc;
-}
-
-static void scc_tf_load(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
-	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-
-	if (valid & IDE_VALID_FEATURE)
-		scc_ide_outb(tf->feature, io_ports->feature_addr);
-	if (valid & IDE_VALID_NSECT)
-		scc_ide_outb(tf->nsect, io_ports->nsect_addr);
-	if (valid & IDE_VALID_LBAL)
-		scc_ide_outb(tf->lbal, io_ports->lbal_addr);
-	if (valid & IDE_VALID_LBAM)
-		scc_ide_outb(tf->lbam, io_ports->lbam_addr);
-	if (valid & IDE_VALID_LBAH)
-		scc_ide_outb(tf->lbah, io_ports->lbah_addr);
-	if (valid & IDE_VALID_DEVICE)
-		scc_ide_outb(tf->device, io_ports->device_addr);
-}
-
-static void scc_tf_read(ide_drive_t *drive, struct ide_taskfile *tf, u8 valid)
-{
-	struct ide_io_ports *io_ports = &drive->hwif->io_ports;
-
-	if (valid & IDE_VALID_ERROR)
-		tf->error  = scc_ide_inb(io_ports->feature_addr);
-	if (valid & IDE_VALID_NSECT)
-		tf->nsect  = scc_ide_inb(io_ports->nsect_addr);
-	if (valid & IDE_VALID_LBAL)
-		tf->lbal   = scc_ide_inb(io_ports->lbal_addr);
-	if (valid & IDE_VALID_LBAM)
-		tf->lbam   = scc_ide_inb(io_ports->lbam_addr);
-	if (valid & IDE_VALID_LBAH)
-		tf->lbah   = scc_ide_inb(io_ports->lbah_addr);
-	if (valid & IDE_VALID_DEVICE)
-		tf->device = scc_ide_inb(io_ports->device_addr);
-}
-
-static void scc_input_data(ide_drive_t *drive, struct ide_cmd *cmd,
-			   void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	len++;
-
-	if (drive->io_32bit) {
-		scc_ide_insl(data_addr, buf, len / 4);
-
-		if ((len & 3) >= 2)
-			scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
-	} else
-		scc_ide_insw(data_addr, buf, len / 2);
-}
-
-static void scc_output_data(ide_drive_t *drive,  struct ide_cmd *cmd,
-			    void *buf, unsigned int len)
-{
-	unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
-	len++;
-
-	if (drive->io_32bit) {
-		scc_ide_outsl(data_addr, buf, len / 4);
-
-		if ((len & 3) >= 2)
-			scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
-	} else
-		scc_ide_outsw(data_addr, buf, len / 2);
-}
-
-/**
- *	init_mmio_iops_scc	-	set up the iops for MMIO
- *	@hwif: interface to set up
- *
- */
-
-static void init_mmio_iops_scc(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	unsigned long dma_base = ports->dma;
-
-	ide_set_hwifdata(hwif, ports);
-
-	hwif->dma_base = dma_base;
-	hwif->config_data = ports->ctl;
-}
-
-/**
- *	init_iops_scc	-	set up iops
- *	@hwif: interface to set up
- *
- *	Do the basic setup for the SCC hardware interface
- *	and then do the MMIO setup.
- */
-
-static void init_iops_scc(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
-	hwif->hwif_data = NULL;
-	if (pci_get_drvdata(dev) == NULL)
-		return;
-	init_mmio_iops_scc(hwif);
-}
-
-static int scc_init_dma(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
-	return ide_allocate_dma_engine(hwif);
-}
-
-static u8 scc_cable_detect(ide_hwif_t *hwif)
-{
-	return ATA_CBL_PATA80;
-}
-
-/**
- *	init_hwif_scc	-	set up hwif
- *	@hwif: interface to set up
- *
- *	We do the basic set up of the interface structure. The SCC
- *	requires several custom handlers so we override the default
- *	ide DMA handlers appropriately.
- */
-
-static void init_hwif_scc(ide_hwif_t *hwif)
-{
-	/* PTERADD */
-	out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
-
-	if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
-		hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
-	else
-		hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
-}
-
-static const struct ide_tp_ops scc_tp_ops = {
-	.exec_command		= scc_exec_command,
-	.read_status		= scc_read_status,
-	.read_altstatus		= scc_read_altstatus,
-	.write_devctl		= scc_write_devctl,
-
-	.dev_select		= ide_dev_select,
-	.tf_load		= scc_tf_load,
-	.tf_read		= scc_tf_read,
-
-	.input_data		= scc_input_data,
-	.output_data		= scc_output_data,
-};
-
-static const struct ide_port_ops scc_port_ops = {
-	.set_pio_mode		= scc_set_pio_mode,
-	.set_dma_mode		= scc_set_dma_mode,
-	.udma_filter		= scc_udma_filter,
-	.cable_detect		= scc_cable_detect,
-};
-
-static const struct ide_dma_ops scc_dma_ops = {
-	.dma_host_set		= scc_dma_host_set,
-	.dma_setup		= scc_dma_setup,
-	.dma_start		= scc_dma_start,
-	.dma_end		= scc_dma_end,
-	.dma_test_irq		= scc_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timer_expiry	= ide_dma_sff_timer_expiry,
-	.dma_sff_read_status	= scc_dma_sff_read_status,
-};
-
-static const struct ide_port_info scc_chipset = {
-	.name		= "sccIDE",
-	.init_iops	= init_iops_scc,
-	.init_dma	= scc_init_dma,
-	.init_hwif	= init_hwif_scc,
-	.tp_ops		= &scc_tp_ops,
-	.port_ops	= &scc_port_ops,
-	.dma_ops	= &scc_dma_ops,
-	.host_flags	= IDE_HFLAG_SINGLE,
-	.irq_flags	= IRQF_SHARED,
-	.pio_mask	= ATA_PIO4,
-	.chipset	= ide_pci,
-};
-
-/**
- *	scc_init_one	-	pci layer discovery entry
- *	@dev: PCI device
- *	@id: ident table entry
- *
- *	Called by the PCI code when it finds an SCC PATA controller.
- *	We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	return init_setup_scc(dev, &scc_chipset);
-}
-
-/**
- *	scc_remove	-	pci layer remove entry
- *	@dev: PCI device
- *
- *	Called by the PCI code when it removes an SCC PATA controller.
- */
-
-static void scc_remove(struct pci_dev *dev)
-{
-	struct scc_ports *ports = pci_get_drvdata(dev);
-	struct ide_host *host = ports->host;
-
-	ide_host_remove(host);
-
-	iounmap((void*)ports->dma);
-	iounmap((void*)ports->ctl);
-	pci_release_selected_regions(dev, (1 << 2) - 1);
-	memset(ports, 0, sizeof(*ports));
-}
-
-static const struct pci_device_id scc_pci_tbl[] = {
-	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-
-static struct pci_driver scc_pci_driver = {
-	.name = "SCC IDE",
-	.id_table = scc_pci_tbl,
-	.probe = scc_init_one,
-	.remove = scc_remove,
-};
-
-static int __init scc_ide_init(void)
-{
-	return ide_pci_register_driver(&scc_pci_driver);
-}
-
-static void __exit scc_ide_exit(void)
-{
-	pci_unregister_driver(&scc_pci_driver);
-}
-
-module_init(scc_ide_init);
-module_exit(scc_ide_exit);
-
-MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
-MODULE_LICENSE("GPL");
-- 
cgit v1.2.3-70-g09d2