From 98cd1552ea27e512c7e99e2aa76042a26e4fb25c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 30 Mar 2017 18:43:21 -0700 Subject: net: dsa: Mock-up driver This patch adds support for a DSA mock-up driver which essentially does the following: - registers/unregisters 4 fixed PHYs to the slave network devices - uses eth0 (configurable) as the master netdev - registers the switch as a fixed MDIO device against the fixed MDIO bus at address 31 - includes dynamic debug prints for dsa_switch_ops functions that can be enabled to get call traces This is a good way to test modular builds as well as exercise the DSA APIs without requiring access to real hardware. This does not test the data-path, although this could be added later on. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- drivers/net/dsa/dsa_loop_bdinfo.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 drivers/net/dsa/dsa_loop_bdinfo.c (limited to 'drivers/net/dsa/dsa_loop_bdinfo.c') diff --git a/drivers/net/dsa/dsa_loop_bdinfo.c b/drivers/net/dsa/dsa_loop_bdinfo.c new file mode 100644 index 000000000000..fb8d5dc71013 --- /dev/null +++ b/drivers/net/dsa/dsa_loop_bdinfo.c @@ -0,0 +1,34 @@ +#include +#include +#include +#include + +#include "dsa_loop.h" + +static struct dsa_loop_pdata dsa_loop_pdata = { + .cd = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[DSA_LOOP_CPU_PORT] = "cpu", + }, + .name = "DSA mockup driver", + .enabled_ports = 0x1f, + .netdev = "eth0", +}; + +static const struct mdio_board_info bdinfo = { + .bus_id = "fixed-0", + .modalias = "dsa-loop", + .mdio_addr = 31, + .platform_data = &dsa_loop_pdata, +}; + +static int __init dsa_loop_bdinfo_init(void) +{ + return mdiobus_register_board_info(&bdinfo, 1); +} +arch_initcall(dsa_loop_bdinfo_init) + +MODULE_LICENSE("GPL"); -- cgit v1.2.3-70-g09d2