From 745d0bd3af99ccc8c5f5822f808cd133eadad6ac Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 31 Jan 2018 16:26:27 +0900 Subject: e1000e: Remove Other from EIAC It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 1298b69f990b..153ad406c65e 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1918,6 +1918,8 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) bool enable = true; icr = er32(ICR); + ew32(ICR, E1000_ICR_OTHER); + if (icr & E1000_ICR_RXO) { ew32(ICR, E1000_ICR_RXO); enable = false; @@ -2040,7 +2042,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) hw->hw_addr + E1000_EITR_82574(vector)); else writel(1, hw->hw_addr + E1000_EITR_82574(vector)); - adapter->eiac_mask |= E1000_IMS_OTHER; /* Cause Tx interrupts on every write back */ ivar |= BIT(31); @@ -2265,7 +2266,7 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); - ew32(IMS, adapter->eiac_mask | E1000_IMS_LSC); + ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); } else if (hw->mac.type >= e1000_pch_lpt) { ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { -- cgit v1.2.3-70-g09d2 From 1f0ea19722ef9dfa229a9540f70b8d1c34a98a6a Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Thu, 8 Feb 2018 15:47:12 +0900 Subject: Partial revert "e1000e: Avoid receiver overrun interrupt bursts" This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 16 ++-------------- 1 file changed, 2 insertions(+), 14 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 153ad406c65e..3b36efa6228d 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1915,21 +1915,10 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; u32 icr; - bool enable = true; icr = er32(ICR); ew32(ICR, E1000_ICR_OTHER); - if (icr & E1000_ICR_RXO) { - ew32(ICR, E1000_ICR_RXO); - enable = false; - /* napi poll will re-enable Other, make sure it runs */ - if (napi_schedule_prep(&adapter->napi)) { - adapter->total_rx_bytes = 0; - adapter->total_rx_packets = 0; - __napi_schedule(&adapter->napi); - } - } if (icr & E1000_ICR_LSC) { ew32(ICR, E1000_ICR_LSC); hw->mac.get_link_status = true; @@ -1938,7 +1927,7 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) mod_timer(&adapter->watchdog_timer, jiffies + 1); } - if (enable && !test_bit(__E1000_DOWN, &adapter->state)) + if (!test_bit(__E1000_DOWN, &adapter->state)) ew32(IMS, E1000_IMS_OTHER); return IRQ_HANDLED; @@ -2708,8 +2697,7 @@ static int e1000e_poll(struct napi_struct *napi, int weight) napi_complete_done(napi, work_done); if (!test_bit(__E1000_DOWN, &adapter->state)) { if (adapter->msix_entries) - ew32(IMS, adapter->rx_ring->ims_val | - E1000_IMS_OTHER); + ew32(IMS, adapter->rx_ring->ims_val); else e1000_irq_enable(adapter); } -- cgit v1.2.3-70-g09d2 From 361a954e6a7215de11a6179ad9bdc07d7e394b04 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Thu, 8 Feb 2018 15:47:13 +0900 Subject: e1000e: Fix queue interrupt re-raising in Other interrupt Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 3b36efa6228d..2c9609bee2ae 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1919,6 +1919,9 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) icr = er32(ICR); ew32(ICR, E1000_ICR_OTHER); + if (icr & adapter->eiac_mask) + ew32(ICS, (icr & adapter->eiac_mask)); + if (icr & E1000_ICR_LSC) { ew32(ICR, E1000_ICR_LSC); hw->mac.get_link_status = true; -- cgit v1.2.3-70-g09d2 From 116f4a640b3197401bc93b8adc6c35040308ceff Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Thu, 8 Feb 2018 15:47:14 +0900 Subject: e1000e: Avoid missed interrupts following ICR read The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/defines.h | 21 ++++++++++++++++++++- drivers/net/ethernet/intel/e1000e/netdev.c | 11 ++++------- 2 files changed, 24 insertions(+), 8 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index afb7ebe20b24..824fd44e25f0 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -400,6 +400,10 @@ #define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ #define E1000_ICR_RXO 0x00000040 /* Receiver Overrun */ #define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_MDAC 0x00000200 /* MDIO Access Complete */ +#define E1000_ICR_SRPD 0x00010000 /* Small Receive Packet Detected */ +#define E1000_ICR_ACK 0x00020000 /* Receive ACK Frame Detected */ +#define E1000_ICR_MNG 0x00040000 /* Manageability Event Detected */ #define E1000_ICR_ECCER 0x00400000 /* Uncorrectable ECC Error */ /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_INT_ASSERTED 0x80000000 @@ -407,7 +411,7 @@ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ #define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */ #define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */ -#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */ +#define E1000_ICR_OTHER 0x01000000 /* Other Interrupt */ /* PBA ECC Register */ #define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */ @@ -431,12 +435,27 @@ E1000_IMS_RXSEQ | \ E1000_IMS_LSC) +/* These are all of the events related to the OTHER interrupt. + */ +#define IMS_OTHER_MASK ( \ + E1000_IMS_LSC | \ + E1000_IMS_RXO | \ + E1000_IMS_MDAC | \ + E1000_IMS_SRPD | \ + E1000_IMS_ACK | \ + E1000_IMS_MNG) + /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ #define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ #define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ #define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* Receiver Overrun */ #define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO Access Complete */ +#define E1000_IMS_SRPD E1000_ICR_SRPD /* Small Receive Packet */ +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive ACK Frame Detected */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability Event */ #define E1000_IMS_ECCER E1000_ICR_ECCER /* Uncorrectable ECC Error */ #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 2c9609bee2ae..9fd4050a91ca 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1914,16 +1914,12 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) struct net_device *netdev = data; struct e1000_adapter *adapter = netdev_priv(netdev); struct e1000_hw *hw = &adapter->hw; - u32 icr; - - icr = er32(ICR); - ew32(ICR, E1000_ICR_OTHER); + u32 icr = er32(ICR); if (icr & adapter->eiac_mask) ew32(ICS, (icr & adapter->eiac_mask)); if (icr & E1000_ICR_LSC) { - ew32(ICR, E1000_ICR_LSC); hw->mac.get_link_status = true; /* guard against interrupt when we're going down */ if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -1931,7 +1927,7 @@ static irqreturn_t e1000_msix_other(int __always_unused irq, void *data) } if (!test_bit(__E1000_DOWN, &adapter->state)) - ew32(IMS, E1000_IMS_OTHER); + ew32(IMS, E1000_IMS_OTHER | IMS_OTHER_MASK); return IRQ_HANDLED; } @@ -2258,7 +2254,8 @@ static void e1000_irq_enable(struct e1000_adapter *adapter) if (adapter->msix_entries) { ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574); - ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC); + ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | + IMS_OTHER_MASK); } else if (hw->mac.type >= e1000_pch_lpt) { ew32(IMS, IMS_ENABLE_MASK | E1000_IMS_ECCER); } else { -- cgit v1.2.3-70-g09d2 From aea3fca005fb45f80869f2e8d56fd4e64c1d1fdb Mon Sep 17 00:00:00 2001 From: Pierre-Yves Kerbrat Date: Fri, 26 Jan 2018 11:24:12 +0100 Subject: e1000e: allocate ring descriptors with dma_zalloc_coherent Descriptor rings were not initialized at zero when allocated When area contained garbage data, it caused skb_over_panic in e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set) This patch makes use of dma_zalloc_coherent to make sure the ring is memset at 0 to prevent the area from containing garbage. Following is the signature of the panic: IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0 IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()! IODDR0@0.0: Kernel panic - not syncing: BUG! IODDR0@0.0: IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0) IODDR0@0.0: SP = <815a1c0c> IODDR0@0.0: Stack: 00000001 IODDR0@0.0: b2d89800 815e33ac IODDR0@0.0: ea73c040 00000001 IODDR0@0.0: 60040003 0000fa0a IODDR0@0.0: 00000002 IODDR0@0.0: IODDR0@0.0: 804540c0 815a1c70 IODDR0@0.0: b2744000 602ac070 IODDR0@0.0: 815a1c44 b2d89800 IODDR0@0.0: 8173cc00 815a1c08 IODDR0@0.0: IODDR0@0.0: 00000006 IODDR0@0.0: 815a1b50 00000000 IODDR0@0.0: 80079434 00000001 IODDR0@0.0: ab46df40 b2744000 IODDR0@0.0: b2d89800 IODDR0@0.0: IODDR0@0.0: 0000fa0a 8045745c IODDR0@0.0: 815a1c88 0000fa0a IODDR0@0.0: 80407b20 b2789f80 IODDR0@0.0: 00000005 80407b20 IODDR0@0.0: IODDR0@0.0: IODDR0@0.0: Call Trace: IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8 IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0 IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8 IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288 IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8 IODDR0@0.0: ... IODDR0@0.0: Maximum depth to print reached. Use kstack= To specify a custom value (where 0 means to display the full backtrace) IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG! Signed-off-by: Pierre-Yves Kerbrat Signed-off-by: Marius Gligor Tested-by: Aaron Brown Reviewed-by: Alexander Duyck Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 9fd4050a91ca..c0f23446bf26 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2323,8 +2323,8 @@ static int e1000_alloc_ring_dma(struct e1000_adapter *adapter, { struct pci_dev *pdev = adapter->pdev; - ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma, - GFP_KERNEL); + ring->desc = dma_zalloc_coherent(&pdev->dev, ring->size, &ring->dma, + GFP_KERNEL); if (!ring->desc) return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 3016e0a0c91246e55418825ba9aae271be267522 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Tue, 6 Mar 2018 10:55:52 +0900 Subject: Revert "e1000e: Separate signaling for link check/link up" This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier Acked-by: Alexander Duyck Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/ich8lan.c | 13 ++++--------- drivers/net/ethernet/intel/e1000e/mac.c | 13 ++++--------- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 3 files changed, 9 insertions(+), 19 deletions(-) (limited to 'drivers/net/ethernet/intel/e1000e/netdev.c') diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c index ff308b05d68c..d6d4ed7acf03 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.c +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c @@ -1367,9 +1367,6 @@ out: * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. - * - * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link - * up). **/ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) { @@ -1385,7 +1382,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 1; + return 0; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -1602,7 +1599,7 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * we have already determined whether we have link or not. */ if (!mac->autoneg) - return 1; + return -E1000_ERR_CONFIG; /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to @@ -1616,12 +1613,10 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { + if (ret_val) e_dbg("Error configuring flow control\n"); - return ret_val; - } - return 1; + return ret_val; } static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter) diff --git a/drivers/net/ethernet/intel/e1000e/mac.c b/drivers/net/ethernet/intel/e1000e/mac.c index db735644b312..b322011ec282 100644 --- a/drivers/net/ethernet/intel/e1000e/mac.c +++ b/drivers/net/ethernet/intel/e1000e/mac.c @@ -410,9 +410,6 @@ void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw) * Checks to see of the link status of the hardware has changed. If a * change in link status has been detected, then we read the PHY registers * to get the current speed/duplex if link exists. - * - * Returns a negative error code (-E1000_ERR_*) or 0 (link down) or 1 (link - * up). **/ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) { @@ -426,7 +423,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) * Change or Rx Sequence Error interrupt. */ if (!mac->get_link_status) - return 1; + return 0; /* First we want to see if the MII Status Register reports * link. If so, then we want to get the current speed/duplex @@ -450,7 +447,7 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) * we have already determined whether we have link or not. */ if (!mac->autoneg) - return 1; + return -E1000_ERR_CONFIG; /* Auto-Neg is enabled. Auto Speed Detection takes care * of MAC speed/duplex configuration. So we only need to @@ -464,12 +461,10 @@ s32 e1000e_check_for_copper_link(struct e1000_hw *hw) * different link partner. */ ret_val = e1000e_config_fc_after_link_up(hw); - if (ret_val) { + if (ret_val) e_dbg("Error configuring flow control\n"); - return ret_val; - } - return 1; + return ret_val; } /** diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index c0f23446bf26..dc853b0863af 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -5090,7 +5090,7 @@ static bool e1000e_has_link(struct e1000_adapter *adapter) case e1000_media_type_copper: if (hw->mac.get_link_status) { ret_val = hw->mac.ops.check_for_link(hw); - link_active = ret_val > 0; + link_active = !hw->mac.get_link_status; } else { link_active = true; } -- cgit v1.2.3-70-g09d2