From 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:14 +0300 Subject: net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only There are three DW MAC IP-cores which can have the multiple Tx/Rx queues enabled: DW GMAC v3.7+ with AV feature, DW QoS Eth v4.x/v5.x, DW XGMAC/XLGMAC Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't support the half-duplex link mode in case if more than one queues enabled: "In multiple queue/channel configurations, for half-duplex operation, enable only the Q0/CH0 on Tx and Rx. For single queue/channel in full-duplex operation, any queue/channel can be enabled." The rest of the IP-cores don't have such constraint. Thus in order to have the constraint applied for the DW QoS Eth MACs only, let's move the it' implementation to the respective MAC-capabilities getter and make sure the getter is called in the queues re-init procedure. Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++---------------- 1 file changed, 3 insertions(+), 16 deletions(-) (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 24cd80490d19..dd58c21b53ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev) return ret; } -static void stmmac_set_half_duplex(struct stmmac_priv *priv) -{ - /* Half-Duplex can only work with single tx queue */ - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); - else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); -} - static int stmmac_phy_setup(struct stmmac_priv *priv) { struct stmmac_mdio_bus_data *mdio_bus_data; @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) priv->phylink_config.supported_interfaces); priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10FD | MAC_100FD | - MAC_1000FD; - - stmmac_set_half_duplex(priv); + MAC_10 | MAC_100 | MAC_1000; /* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); @@ -7355,7 +7341,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt); - stmmac_set_half_duplex(priv); + stmmac_mac_phylink_get_caps(priv); + stmmac_napi_add(dev); if (netif_running(dev)) -- cgit v1.2.3-70-g09d2 From 59c3d6ca6cbded6c6599e975b42a9d6a27fcbaf2 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:15 +0300 Subject: net: stmmac: Fix max-speed being ignored on queue re-init It's possible to have the maximum link speed being artificially limited on the platform-specific basis. It's done either by setting up the plat_stmmacenet_data::max_speed field or by specifying the "max-speed" DT-property. In such cases it's required that any specific MAC-capabilities re-initializations would take the limit into account. In particular the link speed capabilities may change during the number of active Tx/Rx queues re-initialization. But the currently implemented procedure doesn't take the speed limit into account. Fix that by calling phylink_limit_mac_speed() in the stmmac_reinit_queues() method if the speed limitation was required in the same way as it's done in the stmmac_phy_setup() function. Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated") Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index dd58c21b53ee..b8a1f02398ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7328,6 +7328,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) { struct stmmac_priv *priv = netdev_priv(dev); int ret = 0, i; + int max_speed; if (netif_running(dev)) stmmac_release(dev); @@ -7343,6 +7344,10 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) stmmac_mac_phylink_get_caps(priv); + max_speed = priv->plat->max_speed; + if (max_speed) + phylink_limit_mac_speed(&priv->phylink_config, max_speed); + stmmac_napi_add(dev); if (netif_running(dev)) -- cgit v1.2.3-70-g09d2 From 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:16 +0300 Subject: net: stmmac: Fix IP-cores specific MAC capabilities Here is the list of the MAC capabilities specific to the particular DW MAC IP-cores currently supported by the driver: DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD if there is more than 1 active Tx/Rx queues: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD As you can see there are only two common capabilities: MAC_ASYM_PAUSE | MAC_SYM_PAUSE. Meanwhile what is currently implemented defines 10/100/1000 link speeds for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC and DW XLGMAC devices. Seeing the flow-control is implemented as a callback for each MAC IP-core (see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(), etc) and since the MAC-specific setup() method is supposed to be called for each available DW MAC-based device, the capabilities initialization can be freely moved to these setup() functions, thus correctly setting up the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A new stmmac_link::caps field was specifically introduced for that so to have all link-specific info preserved in a single structure. Note the suggested change fixes three earlier commits at a time. The commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b ("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000 capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit 8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the 10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core. Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes") Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support") Suggested-by: Russell King (Oracle) Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/common.h | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++------ drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 18 ++++++++---------- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++--- 7 files changed, 23 insertions(+), 19 deletions(-) (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index a6fefe675ef1..3b7d4ac1e7be 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -553,6 +553,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp; extern const struct stmmac_mode_ops dwmac4_ring_mode_ops; struct mac_link { + u32 caps; u32 speed_mask; u32 speed10; u32 speed100; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index b21d99faa2d0..e1b761dcfa1d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) priv->dev->priv_flags |= IFF_UNICAST_FLT; + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; /* The loopback bit seems to be re-set when link change * Simply mask it each time * Speed 10/100/1000 are set in BIT(2)/BIT(3) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index 3927609abc44..8555299443f4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; mac->link.duplex = GMAC_CONTROL_DM; mac->link.speed10 = GMAC_CONTROL_PS; mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index a6e8d7bd9588..7667d103cd0e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv) dev_info(priv->device, "\tDWMAC100\n"); mac->pcsr = priv->ioaddr; + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100; mac->link.duplex = MAC_CONTROL_F; mac->link.speed10 = 0; mac->link.speed100 = 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index ec6a13e644b3..a38226d7cc6a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -70,14 +70,10 @@ static void dwmac4_core_init(struct mac_device_info *hw, static void dwmac4_phylink_get_caps(struct stmmac_priv *priv) { - priv->phylink_config.mac_capabilities |= MAC_2500FD; - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); + priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD); else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); + priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD); } static void dwmac4_rx_queue_enable(struct mac_device_info *hw, @@ -1385,6 +1381,8 @@ int dwmac4_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; mac->link.duplex = GMAC_CONFIG_DM; mac->link.speed10 = GMAC_CONFIG_PS; mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index e841e312077e..f8e7775bb633 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw, writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN); } -static void xgmac_phylink_get_caps(struct stmmac_priv *priv) -{ - priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD | - MAC_10000FD | MAC_25000FD | - MAC_40000FD | MAC_50000FD | - MAC_100000FD; -} - static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable) { u32 tx = readl(ioaddr + XGMAC_TX_CONFIG); @@ -1540,7 +1532,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg * const struct stmmac_ops dwxgmac210_ops = { .core_init = dwxgmac2_core_init, - .phylink_get_caps = xgmac_phylink_get_caps, .set_mac = dwxgmac2_set_mac, .rx_ipc = dwxgmac2_rx_ipc, .rx_queue_enable = dwxgmac2_rx_queue_enable, @@ -1601,7 +1592,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode, const struct stmmac_ops dwxlgmac2_ops = { .core_init = dwxgmac2_core_init, - .phylink_get_caps = xgmac_phylink_get_caps, .set_mac = dwxgmac2_set_mac, .rx_ipc = dwxgmac2_rx_ipc, .rx_queue_enable = dwxlgmac2_rx_queue_enable, @@ -1661,6 +1651,9 @@ int dwxgmac2_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_1000FD | MAC_2500FD | MAC_5000FD | + MAC_10000FD; mac->link.duplex = 0; mac->link.speed10 = XGMAC_CONFIG_SS_10_MII; mac->link.speed100 = XGMAC_CONFIG_SS_100_MII; @@ -1698,6 +1691,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_1000FD | MAC_2500FD | MAC_5000FD | + MAC_10000FD | MAC_25000FD | + MAC_40000FD | MAC_50000FD | + MAC_100000FD; mac->link.duplex = 0; mac->link.speed1000 = XLGMAC_CONFIG_SS_1000; mac->link.speed2500 = XLGMAC_CONFIG_SS_2500; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b8a1f02398ee..7c6fb14b5555 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1225,12 +1225,11 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) xpcs_get_interfaces(priv->hw->xpcs, priv->phylink_config.supported_interfaces); - priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; - /* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); + priv->phylink_config.mac_capabilities = priv->hw->link.caps; + max_speed = priv->plat->max_speed; if (max_speed) phylink_limit_mac_speed(&priv->phylink_config, max_speed); @@ -7344,6 +7343,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) stmmac_mac_phylink_get_caps(priv); + priv->phylink_config.mac_capabilities = priv->hw->link.caps; + max_speed = priv->plat->max_speed; if (max_speed) phylink_limit_mac_speed(&priv->phylink_config, max_speed); -- cgit v1.2.3-70-g09d2