From 9a017a910346afd88ec2e065989903bf211a7d37 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Sat, 24 Jul 2010 15:58:54 +0200 Subject: pcmcia: do not use io_req_t after call to pcmcia_request_io() After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski --- drivers/net/pcmcia/xirc2ps_cs.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/net/pcmcia/xirc2ps_cs.c') diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index e3a85ce89880..034920b459d1 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -877,13 +877,13 @@ xirc2ps_config(struct pcmcia_device * link) * the base address of the ethernet port (BasePort1) is written * to the BAR registers of the modem. */ - err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, - link->io.BasePort2 & 0xff); + err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8) + link->resource[1]->start & 0xff); if (err) goto config_error; err = pcmcia_write_config_byte(link, CISREG_IOBASE_1, - (link->io.BasePort2 >> 8) & 0xff); + (link->resource[1]->start >> 8) & 0xff); if (err) goto config_error; @@ -907,7 +907,7 @@ xirc2ps_config(struct pcmcia_device * link) * part. */ writeb(0x47, local->dingo_ccr + CISREG_COR); - ioaddr = link->io.BasePort1; + ioaddr = link->resource[0]->start; writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0); writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1); @@ -954,7 +954,7 @@ xirc2ps_config(struct pcmcia_device * link) /* we can now register the device with the net subsystem */ dev->irq = link->irq; - dev->base_addr = link->io.BasePort1; + dev->base_addr = link->resource[0]->start; if (local->dingo) do_reset(dev, 1); /* a kludge to make the cem56 work */ -- cgit v1.2.3-70-g09d2