From 8ab5415d6c701a59dd6fc2bc93cf476ecc03ada5 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@qca.qualcomm.com>
Date: Wed, 9 May 2012 22:14:51 +0300
Subject: ath6kl: Use correct max-scan-SSIDs limit

The currently used firmware images support 16 SSIDs in the scan
request (indexes 0..15), so update the host driver to use the same
limit to allow some more SSIDs to be scanned per request. In addition,
change the max-index to max-SSIDs to make it easier to understand the
implementation and fix couple of off-by-one checks that could limit
the maximum number of entries too strictly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 ++++----
 drivers/net/wireless/ath/ath6kl/wmi.c      | 2 +-
 drivers/net/wireless/ath/ath6kl/wmi.h      | 4 ++--
 3 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index b869a358ce43..a6bebc20fd18 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -888,7 +888,7 @@ static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 {
 	u8 i;
 
-	if (n_ssids > MAX_PROBED_SSID_INDEX)
+	if (n_ssids > MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	for (i = 0; i < n_ssids; i++) {
@@ -900,7 +900,7 @@ static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 	}
 
 	/* Make sure no old entries are left behind */
-	for (i = n_ssids; i < MAX_PROBED_SSID_INDEX; i++) {
+	for (i = n_ssids; i < MAX_PROBED_SSIDS; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
 					  DISABLE_SSID_FLAG, 0, NULL);
 	}
@@ -3470,7 +3470,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	}
 
 	/* max num of ssids that can be probed during scanning */
-	wiphy->max_scan_ssids = MAX_PROBED_SSID_INDEX;
+	wiphy->max_scan_ssids = MAX_PROBED_SSIDS;
 	wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */
 	switch (ar->hw.cap) {
 	case WMI_11AN_CAP:
@@ -3527,7 +3527,7 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 	wiphy->wowlan.pattern_min_len = 1;
 	wiphy->wowlan.pattern_max_len = WOW_PATTERN_SIZE;
 
-	wiphy->max_sched_scan_ssids = MAX_PROBED_SSID_INDEX;
+	wiphy->max_sched_scan_ssids = MAX_PROBED_SSIDS;
 
 	ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
 			    WIPHY_FLAG_HAVE_AP_SME |
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index ee8ec2394c2c..bdd3b2c55637 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -1995,7 +1995,7 @@ int ath6kl_wmi_probedssid_cmd(struct wmi *wmi, u8 if_idx, u8 index, u8 flag,
 	struct wmi_probed_ssid_cmd *cmd;
 	int ret;
 
-	if (index > MAX_PROBED_SSID_INDEX)
+	if (index >= MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	if (ssid_len > sizeof(cmd->ssid))
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 9076bec3a2ba..3518550e3504 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -978,7 +978,7 @@ struct wmi_bss_filter_cmd {
 } __packed;
 
 /* WMI_SET_PROBED_SSID_CMDID */
-#define MAX_PROBED_SSID_INDEX   9
+#define MAX_PROBED_SSIDS   16
 
 enum wmi_ssid_flag {
 	/* disables entry */
@@ -992,7 +992,7 @@ enum wmi_ssid_flag {
 };
 
 struct wmi_probed_ssid_cmd {
-	/* 0 to MAX_PROBED_SSID_INDEX */
+	/* 0 to MAX_PROBED_SSIDS - 1 */
 	u8 entry_index;
 
 	/* see, enum wmi_ssid_flg */
-- 
cgit v1.2.3-70-g09d2


From 6821d4f08dcdc7d8c21a3280f57f53a080f19840 Mon Sep 17 00:00:00 2001
From: Naveen Gangadharan <ngangadh@qca.qualcomm.com>
Date: Fri, 11 May 2012 14:19:09 -0700
Subject: ath6kl: Add wow multicast firmware capability support

Infrastructure to enable Multicast WOW support based on
firmware capability added to the driver.This enables
different customers or chips to control this feature based
on firmware capability.

kvalo: Firmware capability infrastructure for multicast wow feature,
indetation fixes.

Signed-off-by: Naveen Gangadharan <ngangadh@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 8 ++++++--
 drivers/net/wireless/ath/ath6kl/core.h     | 7 +++++++
 drivers/net/wireless/ath/ath6kl/main.c     | 5 ++++-
 3 files changed, 17 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index a6bebc20fd18..22843a1b9f21 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2074,7 +2074,9 @@ static int ath6kl_wow_suspend(struct ath6kl *ar, struct cfg80211_wowlan *wow)
 	if (wow && (wow->n_patterns > WOW_MAX_FILTERS_PER_LIST))
 		return -EINVAL;
 
-	if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags)) {
+	if (!test_bit(NETDEV_MCAST_ALL_ON, &vif->flags) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     ar->fw_capabilities)) {
 		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
 						vif->fw_vif_idx, false);
 		if (ret)
@@ -2209,7 +2211,9 @@ static int ath6kl_wow_resume(struct ath6kl *ar)
 
 	ar->state = ATH6KL_STATE_ON;
 
-	if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags)) {
+	if (!test_bit(NETDEV_MCAST_ALL_OFF, &vif->flags) &&
+	    test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     ar->fw_capabilities)) {
 		ret = ath6kl_wmi_mcast_filter_cmd(vif->ar->wmi,
 					vif->fw_vif_idx, true);
 		if (ret)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 4d9c6f142698..79c7055674bd 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -100,6 +100,13 @@ enum ath6kl_fw_capability {
 	/* Firmware has support to override rsn cap of rsn ie */
 	ATH6KL_FW_CAPABILITY_RSN_CAP_OVERRIDE,
 
+	/*
+	 * Multicast support in WOW and host awake mode.
+	 * Allow all multicast in host awake mode.
+	 * Apply multicast filter in WOW mode.
+	 */
+	ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index e5524470529c..3e6768ae80af 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -1167,7 +1167,10 @@ static void ath6kl_set_multicast_list(struct net_device *ndev)
 	else
 		clear_bit(NETDEV_MCAST_ALL_ON, &vif->flags);
 
-	mc_all_on = mc_all_on || (vif->ar->state == ATH6KL_STATE_ON);
+	if (test_bit(ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
+		     vif->ar->fw_capabilities)) {
+		mc_all_on = mc_all_on || (vif->ar->state == ATH6KL_STATE_ON);
+	}
 
 	if (!(ndev->flags & IFF_MULTICAST)) {
 		mc_all_on = false;
-- 
cgit v1.2.3-70-g09d2


From c422d52d0450988ce9a1ffdddb78807538396749 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Tue, 15 May 2012 00:09:23 -0700
Subject: ath6kl: enable enhanced bmiss detection

Enable enhanced bmiss detection if the firmware supports it. This
feature is only enabled on some firmwares since it comes with a power
cost.

Also add a few missing command ids to keep the enums straight.

kvalo: fix a compiler with ath6kl_err(), add few empty lines

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 30 ++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/cfg80211.h |  2 ++
 drivers/net/wireless/ath/ath6kl/core.h     |  3 +++
 drivers/net/wireless/ath/ath6kl/init.c     |  3 +++
 drivers/net/wireless/ath/ath6kl/wmi.c      | 19 +++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      | 11 +++++++++++
 6 files changed, 68 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 22843a1b9f21..e68b1077816a 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -576,6 +576,9 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev,
 
 	vif->nw_type = vif->next_mode;
 
+	/* enable enhanced bmiss detection if applicable */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, true);
+
 	if (vif->wdev.iftype == NL80211_IFTYPE_P2P_CLIENT)
 		nw_subtype = SUBTYPE_P2PCLIENT;
 
@@ -1512,6 +1515,9 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy,
 		}
 	}
 
+	/* need to clean up enhanced bmiss detection fw state */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
+
 set_iface_type:
 	switch (type) {
 	case NL80211_IFTYPE_STATION:
@@ -2618,6 +2624,30 @@ static int ath6kl_set_channel(struct wiphy *wiphy, struct net_device *dev,
 	return 0;
 }
 
+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable)
+{
+	int err;
+
+	if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag)))
+		return;
+
+	if (vif->nw_type != INFRA_NETWORK)
+		return;
+
+	if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+		      vif->ar->fw_capabilities))
+		return;
+
+	ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n",
+		   enable ? "enable" : "disable");
+
+	err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi,
+					       vif->fw_vif_idx, enable);
+	if (err)
+		ath6kl_err("failed to %s enhanced bmiss detection: %d\n",
+			   enable ? "enable" : "disable", err);
+}
+
 static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon,
 				u8 *rsn_capab)
 {
diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h
index 5ea8cbb79f43..b992046a1b0e 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.h
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h
@@ -62,5 +62,7 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar);
 
 struct ath6kl *ath6kl_cfg80211_create(void);
 void ath6kl_cfg80211_destroy(struct ath6kl *ar);
+/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */
+void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable);
 
 #endif /* ATH6KL_CFG80211_H */
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 79c7055674bd..99169794ff3a 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -107,6 +107,9 @@ enum ath6kl_fw_capability {
 	 */
 	ATH6KL_FW_CAPABILITY_WOW_MULTICAST_FILTER,
 
+	/* Firmware supports enhanced bmiss detection */
+	ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 7eb0515f458a..10de1322e702 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1659,6 +1659,9 @@ void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready)
 		cfg80211_scan_done(vif->scan_req, true);
 		vif->scan_req = NULL;
 	}
+
+	/* need to clean up enhanced bmiss detection fw state */
+	ath6kl_cfg80211_sta_bmiss_enhance(vif, false);
 }
 
 void ath6kl_stop_txrx(struct ath6kl *ar)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index bdd3b2c55637..6ad762daa425 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2997,6 +2997,25 @@ int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
 	return ret;
 }
 
+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enhance)
+{
+	struct sk_buff *skb;
+	struct wmi_sta_bmiss_enhance_cmd *cmd;
+	int ret;
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_sta_bmiss_enhance_cmd *) skb->data;
+	cmd->enable = enhance ? 1 : 0;
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_STA_BMISS_ENHANCE_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
 s32 ath6kl_wmi_get_rate(s8 rate_index)
 {
 	if (rate_index == RATE_AUTO)
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 3518550e3504..8c07e3858b11 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -624,6 +624,10 @@ enum wmi_cmd_id {
 	WMI_SEND_MGMT_CMDID,
 	WMI_BEGIN_SCAN_CMDID,
 
+	WMI_SET_BLACK_LIST,
+	WMI_SET_MCASTRATE,
+
+	WMI_STA_BMISS_ENHANCE_CMDID,
 };
 
 enum wmi_mgmt_frame_type {
@@ -1017,6 +1021,11 @@ struct wmi_bmiss_time_cmd {
 	__le16 num_beacons;
 };
 
+/* WMI_STA_ENHANCE_BMISS_CMDID */
+struct wmi_sta_bmiss_enhance_cmd {
+	u8 enable;
+} __packed;
+
 /* WMI_SET_POWER_MODE_CMDID */
 enum wmi_power_mode {
 	REC_POWER = 0x01,
@@ -2547,6 +2556,8 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode);
 int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on);
 int ath6kl_wmi_add_del_mcast_filter_cmd(struct wmi *wmi, u8 if_idx,
 					u8 *filter, bool add_filter);
+int ath6kl_wmi_sta_bmiss_enhance_cmd(struct wmi *wmi, u8 if_idx, bool enable);
+
 /* AP mode uAPSD */
 int ath6kl_wmi_ap_set_apsd(struct wmi *wmi, u8 if_idx, u8 enable);
 
-- 
cgit v1.2.3-70-g09d2


From dd45b7598f1c52933f276ba7ce175fa1305b8ba0 Mon Sep 17 00:00:00 2001
From: Naveen Singh <navesing@qca.qualcomm.com>
Date: Wed, 16 May 2012 13:29:00 +0300
Subject: ath6kl: Include match ssid list in scheduled scan

Scheduled scan implementation was only taking probed list into
consideration. The matched list was dropped. This would cause
FW not to report the AP as the list never had that AP's SSID
populated. This was causing long connection time when supplicant
would just issue a wild card SSID in probed list. As a part of
this implementation, ath6kl driver would create a complete list
by taking both probed and matched list and pass it to FW. FW would
probe for the SSID that it needs to and would match against the
relevant SSIDS that is been configured.

kvalo: whitespace changes, less indentation in the for loop, use ++

Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 98 +++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath6kl/core.h     |  5 ++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  6 ++
 3 files changed, 99 insertions(+), 10 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index e68b1077816a..f3a6cfc0ddc8 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -53,6 +53,11 @@
 
 #define DEFAULT_BG_SCAN_PERIOD 60
 
+struct ath6kl_cfg80211_match_probe_ssid {
+	struct cfg80211_ssid ssid;
+	u8 flag;
+};
+
 static struct ieee80211_rate ath6kl_rates[] = {
 	RATETAB_ENT(10, 0x1, 0),
 	RATETAB_ENT(20, 0x2, 0),
@@ -887,23 +892,76 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 
 static int ath6kl_set_probed_ssids(struct ath6kl *ar,
 				   struct ath6kl_vif *vif,
-				   struct cfg80211_ssid *ssids, int n_ssids)
+				   struct cfg80211_ssid *ssids, int n_ssids,
+				   struct cfg80211_match_set *match_set,
+				   int n_match_ssid)
 {
-	u8 i;
+	u8 i, j, index_to_add, ssid_found = false;
+	struct ath6kl_cfg80211_match_probe_ssid ssid_list[MAX_PROBED_SSIDS];
+
+	memset(ssid_list, 0, sizeof(ssid_list));
 
-	if (n_ssids > MAX_PROBED_SSIDS)
+	if (n_ssids > MAX_PROBED_SSIDS ||
+	    n_match_ssid > MAX_PROBED_SSIDS)
 		return -EINVAL;
 
 	for (i = 0; i < n_ssids; i++) {
+		memcpy(ssid_list[i].ssid.ssid,
+		       ssids[i].ssid,
+		       ssids[i].ssid_len);
+		ssid_list[i].ssid.ssid_len = ssids[i].ssid_len;
+
+		if (ssids[i].ssid_len)
+			ssid_list[i].flag = SPECIFIC_SSID_FLAG;
+		else
+			ssid_list[i].flag = ANY_SSID_FLAG;
+
+		if (n_match_ssid == 0)
+			ssid_list[i].flag |= MATCH_SSID_FLAG;
+	}
+
+	index_to_add = i;
+
+	for (i = 0; i < n_match_ssid; i++) {
+		ssid_found = false;
+
+		for (j = 0; j < n_ssids; j++) {
+			if ((match_set[i].ssid.ssid_len ==
+			     ssid_list[j].ssid.ssid_len) &&
+			    (!memcmp(ssid_list[j].ssid.ssid,
+				     match_set[i].ssid.ssid,
+				     match_set[i].ssid.ssid_len))) {
+				ssid_list[j].flag |= MATCH_SSID_FLAG;
+				ssid_found = true;
+				break;
+			}
+		}
+
+		if (ssid_found)
+			continue;
+
+		if (index_to_add >= MAX_PROBED_SSIDS)
+			continue;
+
+		ssid_list[index_to_add].ssid.ssid_len =
+			match_set[i].ssid.ssid_len;
+		memcpy(ssid_list[index_to_add].ssid.ssid,
+		       match_set[i].ssid.ssid,
+		       match_set[i].ssid.ssid_len);
+		ssid_list[index_to_add].flag |= MATCH_SSID_FLAG;
+		index_to_add++;
+	}
+
+	for (i = 0; i < index_to_add; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
-					  ssids[i].ssid_len ?
-					  SPECIFIC_SSID_FLAG : ANY_SSID_FLAG,
-					  ssids[i].ssid_len,
-					  ssids[i].ssid);
+					  ssid_list[i].flag,
+					  ssid_list[i].ssid.ssid_len,
+					  ssid_list[i].ssid.ssid);
+
 	}
 
 	/* Make sure no old entries are left behind */
-	for (i = n_ssids; i < MAX_PROBED_SSIDS; i++) {
+	for (i = index_to_add; i < MAX_PROBED_SSIDS; i++) {
 		ath6kl_wmi_probedssid_cmd(ar->wmi, vif->fw_vif_idx, i,
 					  DISABLE_SSID_FLAG, 0, NULL);
 	}
@@ -937,7 +995,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 	}
 
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
-				      request->n_ssids);
+				      request->n_ssids, NULL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -3194,10 +3252,24 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 	ath6kl_cfg80211_scan_complete_event(vif, true);
 
 	ret = ath6kl_set_probed_ssids(ar, vif, request->ssids,
-				      request->n_ssids);
+				      request->n_ssids,
+				      request->match_sets,
+				      request->n_match_sets);
 	if (ret < 0)
 		return ret;
 
+	if (!request->n_match_sets) {
+		ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
+					       ALL_BSS_FILTER, 0);
+		if (ret < 0)
+			return ret;
+	} else {
+		 ret = ath6kl_wmi_bssfilter_cmd(ar->wmi, vif->fw_vif_idx,
+						MATCHED_SSID_FILTER, 0);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* fw uses seconds, also make sure that it's >0 */
 	interval = max_t(u16, 1, request->interval / 1000);
 
@@ -3505,6 +3577,12 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 
 	/* max num of ssids that can be probed during scanning */
 	wiphy->max_scan_ssids = MAX_PROBED_SSIDS;
+
+	/* max num of ssids that can be matched after scan */
+	if (test_bit(ATH6KL_FW_CAPABILITY_SCHED_SCAN_MATCH_LIST,
+		     ar->fw_capabilities))
+		wiphy->max_match_sets = MAX_PROBED_SSIDS;
+
 	wiphy->max_scan_ie_len = 1000; /* FIX: what is correct limit? */
 	switch (ar->hw.cap) {
 	case WMI_11AN_CAP:
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 99169794ff3a..991bd96f7cf6 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -110,6 +110,11 @@ enum ath6kl_fw_capability {
 	/* Firmware supports enhanced bmiss detection */
 	ATH6KL_FW_CAPABILITY_BMISS_ENHANCE,
 
+	/*
+	 * FW supports matching of ssid in schedule scan
+	 */
+	ATH6KL_FW_CAPABILITY_SCHED_SCAN_MATCH_LIST,
+
 	/* this needs to be last */
 	ATH6KL_FW_CAPABILITY_MAX,
 };
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 8c07e3858b11..47756795a26c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -964,6 +964,9 @@ enum wmi_bss_filter {
 	/* beacons matching probed ssid */
 	PROBED_SSID_FILTER,
 
+	/* beacons matching matched ssid */
+	MATCHED_SSID_FILTER,
+
 	/* marker only */
 	LAST_BSS_FILTER,
 };
@@ -993,6 +996,9 @@ enum wmi_ssid_flag {
 
 	/* probes for any ssid */
 	ANY_SSID_FLAG = 0x02,
+
+	/* match for ssid */
+	MATCH_SSID_FLAG = 0x08,
 };
 
 struct wmi_probed_ssid_cmd {
-- 
cgit v1.2.3-70-g09d2


From 33a6664a6e4b45814ef6e3129842f3fd7e5d1117 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Wed, 16 May 2012 13:41:13 -0700
Subject: ath6kl: issue wmi disconnect after notifying cfg80211

ath6kl would issue a wmi disconnect command in response to a remote
disconnect and return early without notifying cfg80211, only sending a
cfg80211_disconnected (with reason code always 3) in response to the
second disconnect firmware event.

Pass the right reason code to cfg80211 on the first disconnect instead.

This fixes at least one bug where a p2p client would stop trying to
connect after receiving a stale RSN deauth which was reported to
cfg80211 as GO leaving BSS.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 27 ++++++++++++---------------
 1 file changed, 12 insertions(+), 15 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index f3a6cfc0ddc8..7845d33deed9 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -860,20 +860,6 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 		}
 	}
 
-	/*
-	 * Send a disconnect command to target when a disconnect event is
-	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
-	 * request from host) to make the firmware stop trying to connect even
-	 * after giving disconnect event. There will be one more disconnect
-	 * event for this disconnect command with reason code DISCONNECT_CMD
-	 * which will be notified to cfg80211.
-	 */
-
-	if (reason != DISCONNECT_CMD) {
-		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
-		return;
-	}
-
 	clear_bit(CONNECT_PEND, &vif->flags);
 
 	if (vif->sme_state == SME_CONNECTING) {
@@ -883,11 +869,22 @@ void ath6kl_cfg80211_disconnect_event(struct ath6kl_vif *vif, u8 reason,
 					WLAN_STATUS_UNSPECIFIED_FAILURE,
 					GFP_KERNEL);
 	} else if (vif->sme_state == SME_CONNECTED) {
-		cfg80211_disconnected(vif->ndev, reason,
+		cfg80211_disconnected(vif->ndev, proto_reason,
 				      NULL, 0, GFP_KERNEL);
 	}
 
 	vif->sme_state = SME_DISCONNECTED;
+
+	/*
+	 * Send a disconnect command to target when a disconnect event is
+	 * received with reason code other than 3 (DISCONNECT_CMD - disconnect
+	 * request from host) to make the firmware stop trying to connect even
+	 * after giving disconnect event. There will be one more disconnect
+	 * event for this disconnect command with reason code DISCONNECT_CMD
+	 * which won't be notified to cfg80211.
+	 */
+	if (reason != DISCONNECT_CMD)
+		ath6kl_wmi_disconnect_cmd(ar->wmi, vif->fw_vif_idx);
 }
 
 static int ath6kl_set_probed_ssids(struct ath6kl *ar,
-- 
cgit v1.2.3-70-g09d2


From fa338be062e31141a8dadd822a98f558785c8818 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Tue, 22 May 2012 12:52:48 +0530
Subject: ath6kl: Fix missing gpio pin 9 configuration

GPIO pin 9 also needs to be configured along with other gpio
pins to avoid sdio crc errors. I've not experienced any issue
with missing this particular gpio pin configuration, found dunring
code review. This can potentially improve rx performance.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c   | 6 ++++++
 drivers/net/wireless/ath/ath6kl/target.h | 1 +
 2 files changed, 7 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 10de1322e702..241febcd7f7c 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1392,6 +1392,12 @@ static int ath6kl_init_upload(struct ath6kl *ar)
 	    ar->version.target_ver == AR6003_HW_2_1_1_VERSION) {
 		ath6kl_err("temporary war to avoid sdio crc error\n");
 
+		param = 0x28;
+		address = GPIO_BASE_ADDRESS + GPIO_PIN9_ADDRESS;
+		status = ath6kl_bmi_reg_write(ar, address, param);
+		if (status)
+			return status;
+
 		param = 0x20;
 
 		address = GPIO_BASE_ADDRESS + GPIO_PIN10_ADDRESS;
diff --git a/drivers/net/wireless/ath/ath6kl/target.h b/drivers/net/wireless/ath/ath6kl/target.h
index 78e0ef4567a5..a98c12ba70c1 100644
--- a/drivers/net/wireless/ath/ath6kl/target.h
+++ b/drivers/net/wireless/ath/ath6kl/target.h
@@ -45,6 +45,7 @@
 #define LPO_CAL_ENABLE_S		20
 #define LPO_CAL_ENABLE			0x00100000
 
+#define GPIO_PIN9_ADDRESS		0x0000004c
 #define GPIO_PIN10_ADDRESS		0x00000050
 #define GPIO_PIN11_ADDRESS		0x00000054
 #define GPIO_PIN12_ADDRESS		0x00000058
-- 
cgit v1.2.3-70-g09d2


From 06e360ace9434bf37164fd87941b797cc0f3cb7e Mon Sep 17 00:00:00 2001
From: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Date: Tue, 22 May 2012 13:23:12 +0530
Subject: ath6kl: Add support for setting tx rateset.

Tx legacy and mcs rateset can configured using iw for
2.4 and 5 bands.  Add support for the same in driver.

kvalo: add an enum for the hw flags and rename the flag accordingly,
rename ath6kl_cfg80211_set_bitrate_mask() to a shorter version to make
it easier to indent

Signed-off-by: Bala Shanmugam <bkamatch@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |  24 +++++++
 drivers/net/wireless/ath/ath6kl/core.h     |   6 ++
 drivers/net/wireless/ath/ath6kl/init.c     |   5 ++
 drivers/net/wireless/ath/ath6kl/wmi.c      | 109 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  32 +++++++++
 5 files changed, 176 insertions(+)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 7845d33deed9..6a934e16ae83 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -3320,6 +3320,18 @@ static int ath6kl_cfg80211_sscan_stop(struct wiphy *wiphy,
 	return 0;
 }
 
+static int ath6kl_cfg80211_set_bitrate(struct wiphy *wiphy,
+				       struct net_device *dev,
+				       const u8 *addr,
+				       const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath6kl *ar = ath6kl_priv(dev);
+	struct ath6kl_vif *vif = netdev_priv(dev);
+
+	return ath6kl_wmi_set_bitrate_mask(ar->wmi, vif->fw_vif_idx,
+					   mask);
+}
+
 static const struct ieee80211_txrx_stypes
 ath6kl_mgmt_stypes[NUM_NL80211_IFTYPES] = {
 	[NL80211_IFTYPE_STATION] = {
@@ -3386,6 +3398,7 @@ static struct cfg80211_ops ath6kl_cfg80211_ops = {
 	.mgmt_frame_register = ath6kl_mgmt_frame_register,
 	.sched_scan_start = ath6kl_cfg80211_sscan_start,
 	.sched_scan_stop = ath6kl_cfg80211_sscan_stop,
+	.set_bitrate_mask = ath6kl_cfg80211_set_bitrate,
 };
 
 void ath6kl_cfg80211_stop(struct ath6kl_vif *vif)
@@ -3616,6 +3629,17 @@ int ath6kl_cfg80211_init(struct ath6kl *ar)
 		ath6kl_band_5ghz.ht_cap.cap = 0;
 		ath6kl_band_5ghz.ht_cap.ht_supported = false;
 	}
+
+	if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES) {
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[1] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[1] = 0xff;
+	} else {
+		ath6kl_band_2ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+		ath6kl_band_5ghz.ht_cap.mcs.rx_mask[0] = 0xff;
+	}
+
 	if (band_2gig)
 		wiphy->bands[IEEE80211_BAND_2GHZ] = &ath6kl_band_2ghz;
 	if (band_5gig)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 991bd96f7cf6..b1bc6bc69f2a 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -127,6 +127,10 @@ struct ath6kl_fw_ie {
 	u8 data[0];
 };
 
+enum ath6kl_hw_flags {
+	ATH6KL_HW_FLAG_64BIT_RATES	= BIT(0),
+};
+
 #define ATH6KL_FW_API2_FILE "fw-2.bin"
 #define ATH6KL_FW_API3_FILE "fw-3.bin"
 
@@ -702,6 +706,8 @@ struct ath6kl {
 		u32 testscript_addr;
 		enum wmi_phy_cap cap;
 
+		u32 flags;
+
 		struct ath6kl_hw_fw {
 			const char *dir;
 			const char *otp;
diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 241febcd7f7c..daf24ee9d28a 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -42,6 +42,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.reserved_ram_size		= 6912,
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 8,
+		.flags				= 0,
 
 		/* hw2.0 needs override address hardcoded */
 		.app_start_override_addr	= 0x944C00,
@@ -67,6 +68,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 8,
 		.testscript_addr		= 0x57ef74,
+		.flags				= 0,
 
 		.fw = {
 			.dir		= AR6003_HW_2_1_1_FW_DIR,
@@ -91,6 +93,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x433900,
 		.refclk_hz			= 26000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_0_FW_DIR,
@@ -110,6 +113,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x43d400,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_1_FW_DIR,
@@ -129,6 +133,7 @@ static const struct ath6kl_hw hw_list[] = {
 		.board_addr			= 0x435c00,
 		.refclk_hz			= 40000000,
 		.uarttx_pin			= 11,
+		.flags				= ATH6KL_HW_FLAG_64BIT_RATES,
 
 		.fw = {
 			.dir		= AR6004_HW_1_2_FW_DIR,
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 6ad762daa425..63dc4fd73c4c 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -2599,6 +2599,115 @@ static void ath6kl_wmi_relinquish_implicit_pstream_credits(struct wmi *wmi)
 	spin_unlock_bh(&wmi->lock);
 }
 
+static int ath6kl_set_bitrate_mask64(struct wmi *wmi, u8 if_idx,
+				     const struct cfg80211_bitrate_mask *mask)
+{
+	struct sk_buff *skb;
+	int ret, mode, band;
+	u64 mcsrate, ratemask[IEEE80211_NUM_BANDS];
+	struct wmi_set_tx_select_rates64_cmd *cmd;
+
+	memset(&ratemask, 0, sizeof(ratemask));
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		/* copy legacy rate mask */
+		ratemask[band] = mask->control[band].legacy;
+		if (band == IEEE80211_BAND_5GHZ)
+			ratemask[band] =
+				mask->control[band].legacy << 4;
+
+		/* copy mcs rate mask */
+		mcsrate = mask->control[band].mcs[1];
+		mcsrate <<= 8;
+		mcsrate |= mask->control[band].mcs[0];
+		ratemask[band] |= mcsrate << 12;
+		ratemask[band] |= mcsrate << 28;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "Ratemask 64 bit: 2.4:%llx 5:%llx\n",
+		   ratemask[0], ratemask[1]);
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_tx_select_rates64_cmd *) skb->data;
+	for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) {
+		/* A mode operate in 5GHZ band */
+		if (mode == WMI_RATES_MODE_11A ||
+		    mode == WMI_RATES_MODE_11A_HT20 ||
+		    mode == WMI_RATES_MODE_11A_HT40)
+			band = IEEE80211_BAND_5GHZ;
+		else
+			band = IEEE80211_BAND_2GHZ;
+		cmd->ratemask[mode] = cpu_to_le64(ratemask[band]);
+	}
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_SET_TX_SELECT_RATES_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
+static int ath6kl_set_bitrate_mask32(struct wmi *wmi, u8 if_idx,
+				     const struct cfg80211_bitrate_mask *mask)
+{
+	struct sk_buff *skb;
+	int ret, mode, band;
+	u32 mcsrate, ratemask[IEEE80211_NUM_BANDS];
+	struct wmi_set_tx_select_rates32_cmd *cmd;
+
+	memset(&ratemask, 0, sizeof(ratemask));
+	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+		/* copy legacy rate mask */
+		ratemask[band] = mask->control[band].legacy;
+		if (band == IEEE80211_BAND_5GHZ)
+			ratemask[band] =
+				mask->control[band].legacy << 4;
+
+		/* copy mcs rate mask */
+		mcsrate = mask->control[band].mcs[0];
+		ratemask[band] |= mcsrate << 12;
+		ratemask[band] |= mcsrate << 20;
+	}
+
+	ath6kl_dbg(ATH6KL_DBG_WMI,
+		   "Ratemask 32 bit: 2.4:%x 5:%x\n",
+		   ratemask[0], ratemask[1]);
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd) * WMI_RATES_MODE_MAX);
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct wmi_set_tx_select_rates32_cmd *) skb->data;
+	for (mode = 0; mode < WMI_RATES_MODE_MAX; mode++) {
+		/* A mode operate in 5GHZ band */
+		if (mode == WMI_RATES_MODE_11A ||
+		    mode == WMI_RATES_MODE_11A_HT20 ||
+		    mode == WMI_RATES_MODE_11A_HT40)
+			band = IEEE80211_BAND_5GHZ;
+		else
+			band = IEEE80211_BAND_2GHZ;
+		cmd->ratemask[mode] = cpu_to_le32(ratemask[band]);
+	}
+
+	ret = ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				  WMI_SET_TX_SELECT_RATES_CMDID,
+				  NO_SYNC_WMIFLAG);
+	return ret;
+}
+
+int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx,
+				const struct cfg80211_bitrate_mask *mask)
+{
+	struct ath6kl *ar = wmi->parent_dev;
+
+	if (ar->hw.flags & ATH6KL_HW_FLAG_64BIT_RATES)
+		return ath6kl_set_bitrate_mask64(wmi, if_idx, mask);
+	else
+		return ath6kl_set_bitrate_mask32(wmi, if_idx, mask);
+}
+
 int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx,
 				       enum ath6kl_host_mode host_mode)
 {
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 47756795a26c..7c94fe3e9e6d 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1063,6 +1063,36 @@ struct wmi_power_params_cmd {
 	__le16 ps_fail_event_policy;
 } __packed;
 
+/*
+ * Ratemask for below modes should be passed
+ * to WMI_SET_TX_SELECT_RATES_CMDID.
+ * AR6003 has 32 bit mask for each modes.
+ * First 12 bits for legacy rates, 13 to 20
+ * bits for HT 20 rates and 21 to 28 bits for
+ * HT 40 rates
+ */
+enum wmi_mode_phy {
+	WMI_RATES_MODE_11A = 0,
+	WMI_RATES_MODE_11G,
+	WMI_RATES_MODE_11B,
+	WMI_RATES_MODE_11GONLY,
+	WMI_RATES_MODE_11A_HT20,
+	WMI_RATES_MODE_11G_HT20,
+	WMI_RATES_MODE_11A_HT40,
+	WMI_RATES_MODE_11G_HT40,
+	WMI_RATES_MODE_MAX
+};
+
+/* WMI_SET_TX_SELECT_RATES_CMDID */
+struct wmi_set_tx_select_rates32_cmd {
+	__le32 ratemask[WMI_RATES_MODE_MAX];
+} __packed;
+
+/* WMI_SET_TX_SELECT_RATES_CMDID */
+struct wmi_set_tx_select_rates64_cmd {
+	__le64 ratemask[WMI_RATES_MODE_MAX];
+} __packed;
+
 /* WMI_SET_DISC_TIMEOUT_CMDID */
 struct wmi_disc_timeout_cmd {
 	/* seconds */
@@ -2547,6 +2577,8 @@ int ath6kl_wmi_set_ip_cmd(struct wmi *wmi, u8 if_idx,
 			  __be32 ips0, __be32 ips1);
 int ath6kl_wmi_set_host_sleep_mode_cmd(struct wmi *wmi, u8 if_idx,
 				       enum ath6kl_host_mode host_mode);
+int ath6kl_wmi_set_bitrate_mask(struct wmi *wmi, u8 if_idx,
+				const struct cfg80211_bitrate_mask *mask);
 int ath6kl_wmi_set_wow_mode_cmd(struct wmi *wmi, u8 if_idx,
 				enum ath6kl_wow_mode wow_mode,
 				u32 filter, u16 host_req_delay);
-- 
cgit v1.2.3-70-g09d2


From 824174c3b5a962ff706738e36317451a2343355c Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qca.qualcomm.com>
Date: Mon, 28 May 2012 11:51:12 +0530
Subject: ath6kl: Remove unneeded memset in roam related config func

No need to clear requested memory after allocating new SKB
with help of ath6kl_wmi_get_new_buf(). This clear part is
already taken care in ath6kl_wmi_get_new_buf().

Found this on code review.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/wmi.c | 2 --
 1 file changed, 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 63dc4fd73c4c..43bce9c8a86f 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -743,7 +743,6 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
 		return -ENOMEM;
 
 	cmd = (struct roam_ctrl_cmd *) skb->data;
-	memset(cmd, 0, sizeof(*cmd));
 
 	memcpy(cmd->info.bssid, bssid, ETH_ALEN);
 	cmd->roam_ctrl = WMI_FORCE_ROAM;
@@ -763,7 +762,6 @@ int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode)
 		return -ENOMEM;
 
 	cmd = (struct roam_ctrl_cmd *) skb->data;
-	memset(cmd, 0, sizeof(*cmd));
 
 	cmd->info.roam_mode = mode;
 	cmd->roam_ctrl = WMI_SET_ROAM_MODE;
-- 
cgit v1.2.3-70-g09d2


From df6a7072ac3213229c788913f25779e8ab93c9b5 Mon Sep 17 00:00:00 2001
From: Raja Mani <rmani@qca.qualcomm.com>
Date: Mon, 28 May 2012 11:51:13 +0530
Subject: ath6kl: Fix typo in htc mbox debug print msg

Add missing ZERO (x%x to 0x%x) in the format specifier
while printing hex value in htc module.

Signed-off-by: Raja Mani <rmani@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/htc_mbox.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/htc_mbox.c b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
index 2798624d3a9d..cd0e1ba410d6 100644
--- a/drivers/net/wireless/ath/ath6kl/htc_mbox.c
+++ b/drivers/net/wireless/ath/ath6kl/htc_mbox.c
@@ -1309,7 +1309,7 @@ static int ath6kl_htc_rx_packet(struct htc_target *target,
 	}
 
 	ath6kl_dbg(ATH6KL_DBG_HTC,
-		   "htc rx 0x%p hdr x%x len %d mbox 0x%x\n",
+		   "htc rx 0x%p hdr 0x%x len %d mbox 0x%x\n",
 		   packet, packet->info.rx.exp_hdr,
 		   padded_len, dev->ar->mbox_info.htc_addr);
 
-- 
cgit v1.2.3-70-g09d2


From 67b3f1299ab73259aed5871488188a9c59025a54 Mon Sep 17 00:00:00 2001
From: Kiran Reddy <c_lreddy@qca.qualcomm.com>
Date: Tue, 29 May 2012 11:12:50 -0700
Subject: ath6kl: separate ht cap for each band

In virtual interface structure, for each band separate ht cap
is needed. so that one can disable or enable ht capability band
wise.
This will fix the following issue:

1) Disable 11n from supplicant and start a P2P GO.
2) In beacon frames no HT-CAP IE is seen which is expected.
3) Now remove the P2P GO and kill the supplicant.
4) Beacon stops
5) Now using iw  associate to an external AP in 5 GHZ
6) In 5 GHZ no HT IE going in assoc request but
when  associated in 2.4 GHZ can see HT IES over the air
in assoc request.

In the code for del_beacon in cfg80211.c,set_ht_cap is being
called first for 2.4 GHZ and then for 5 GHZ. When  called
for the first time for 2.4 GHZ the enable flag will be set to true
and so when called for the second time for 5 GHZ it just returns
after checking the flag.

Also using this one can have different HT capabilities
per band (for example one may decide not to use 20/40 in 2.4 GHZ
but use it in 5 GHZ). So maintaining a single context is not ok.
it is true for even the enable/disable flag and other HT
capabilities as well

Signed-off-by: Kiran Reddy <c_lreddy@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 5 +++--
 drivers/net/wireless/ath/ath6kl/core.h     | 2 +-
 2 files changed, 4 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 6a934e16ae83..6f20998beceb 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2540,7 +2540,7 @@ void ath6kl_check_wow_status(struct ath6kl *ar)
 static int ath6kl_set_htcap(struct ath6kl_vif *vif, enum ieee80211_band band,
 			    bool ht_enable)
 {
-	struct ath6kl_htcap *htcap = &vif->htcap;
+	struct ath6kl_htcap *htcap = &vif->htcap[band];
 
 	if (htcap->ht_enable == ht_enable)
 		return 0;
@@ -3526,7 +3526,8 @@ struct net_device *ath6kl_interface_add(struct ath6kl *ar, char *name,
 	vif->listen_intvl_t = ATH6KL_DEFAULT_LISTEN_INTVAL;
 	vif->bmiss_time_t = ATH6KL_DEFAULT_BMISS_TIME;
 	vif->bg_scan_period = 0;
-	vif->htcap.ht_enable = true;
+	vif->htcap[IEEE80211_BAND_2GHZ].ht_enable = true;
+	vif->htcap[IEEE80211_BAND_5GHZ].ht_enable = true;
 
 	memcpy(ndev->dev_addr, ar->mac_addr, ETH_ALEN);
 	if (fw_vif_idx != 0)
diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index b1bc6bc69f2a..17a44fad859b 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -560,7 +560,7 @@ struct ath6kl_vif {
 	struct ath6kl_wep_key wep_key_list[WMI_MAX_KEY_INDEX + 1];
 	struct ath6kl_key keys[WMI_MAX_KEY_INDEX + 1];
 	struct aggr_info *aggr_cntxt;
-	struct ath6kl_htcap htcap;
+	struct ath6kl_htcap htcap[IEEE80211_NUM_BANDS];
 
 	struct timer_list disconnect_timer;
 	struct timer_list sched_scan_timer;
-- 
cgit v1.2.3-70-g09d2


From f1ff32e8a8672d4d59283fb7f61f1431c2b9e434 Mon Sep 17 00:00:00 2001
From: Joe Perches <joe@perches.com>
Date: Wed, 30 May 2012 01:58:39 -0700
Subject: ath6kl: Add missing newline terminations

Messages without newlines can be interleaved.
Avoid this by adding terminations.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index 6f20998beceb..d2129030fd73 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -1001,7 +1001,7 @@ static int ath6kl_cfg80211_scan(struct wiphy *wiphy, struct net_device *ndev,
 				       WMI_FRAME_PROBE_REQ,
 				       request->ie, request->ie_len);
 	if (ret) {
-		ath6kl_err("failed to set Probe Request appie for scan");
+		ath6kl_err("failed to set Probe Request appie for scan\n");
 		return ret;
 	}
 
@@ -3288,7 +3288,7 @@ static int ath6kl_cfg80211_sscan_start(struct wiphy *wiphy,
 				       WMI_FRAME_PROBE_REQ,
 				       request->ie, request->ie_len);
 	if (ret) {
-		ath6kl_warn("Failed to set probe request IE for scheduled scan: %d",
+		ath6kl_warn("Failed to set probe request IE for scheduled scan: %d\n",
 			    ret);
 		return ret;
 	}
-- 
cgit v1.2.3-70-g09d2


From d154f32ebe3ffe9dea6ed0a91767883b1e7a6bc0 Mon Sep 17 00:00:00 2001
From: Etay Luz <eluz@qca.qualcomm.com>
Date: Wed, 30 May 2012 11:35:08 +0300
Subject: ath6kl: support changing dtim period on AP mode

This patch adds support for dtim_period configuration in beacon.

kvalo: add a comment about ignoring the error, use vif_idx,
add \n to the warning message

Signed-off-by: Etay Luz <eluz@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/cfg80211.c |  8 +++++++-
 drivers/net/wireless/ath/ath6kl/wmi.c      | 16 ++++++++++++++++
 drivers/net/wireless/ath/ath6kl/wmi.h      |  5 +++++
 3 files changed, 28 insertions(+), 1 deletion(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c
index d2129030fd73..f00d377343d9 100644
--- a/drivers/net/wireless/ath/ath6kl/cfg80211.c
+++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c
@@ -2783,9 +2783,15 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev,
 
 	/* TODO:
 	 * info->interval
-	 * info->dtim_period
 	 */
 
+	ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx,
+					 info->dtim_period);
+
+	/* ignore error, just print a warning and continue normally */
+	if (ret)
+		ath6kl_warn("Failed to set dtim_period in beacon: %d\n", ret);
+
 	if (info->beacon.head == NULL)
 		return -EINVAL;
 	mgmt = (struct ieee80211_mgmt *) info->beacon.head;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c
index 43bce9c8a86f..a6caa673e8ad 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.c
+++ b/drivers/net/wireless/ath/ath6kl/wmi.c
@@ -752,6 +752,22 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid)
 				   NO_SYNC_WMIFLAG);
 }
 
+int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period)
+{
+	struct sk_buff *skb;
+	struct set_dtim_cmd *cmd;
+
+	skb = ath6kl_wmi_get_new_buf(sizeof(*cmd));
+	if (!skb)
+		return -ENOMEM;
+
+	cmd = (struct set_dtim_cmd *) skb->data;
+
+	cmd->dtim_period = cpu_to_le32(dtim_period);
+	return ath6kl_wmi_cmd_send(wmi, if_idx, skb,
+				   WMI_AP_SET_DTIM_CMDID, NO_SYNC_WMIFLAG);
+}
+
 int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode)
 {
 	struct sk_buff *skb;
diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h
index 7c94fe3e9e6d..43339aca585d 100644
--- a/drivers/net/wireless/ath/ath6kl/wmi.h
+++ b/drivers/net/wireless/ath/ath6kl/wmi.h
@@ -1617,6 +1617,10 @@ struct roam_ctrl_cmd {
 	u8 roam_ctrl;
 } __packed;
 
+struct set_dtim_cmd {
+	__le32 dtim_period;
+} __packed;
+
 /* BSS INFO HDR version 2.0 */
 struct wmi_bss_info_hdr2 {
 	__le16 ch; /* frequency in MHz */
@@ -2589,6 +2593,7 @@ int ath6kl_wmi_add_wow_pattern_cmd(struct wmi *wmi, u8 if_idx,
 int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx,
 				   u16 list_id, u16 filter_id);
 int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi);
+int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period);
 int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid);
 int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode);
 int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on);
-- 
cgit v1.2.3-70-g09d2


From 0faf745872f6d00afb318185e8fb181587974b5a Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Wed, 30 May 2012 12:27:11 +0530
Subject: ath6kl: Fix race in aggregation reorder logic

There are many places where tid data are accessed without
the lock (rxtid->lock), this can lead to a race condition
when the timeout handler for aggregatin reorder and the
receive function are getting executed at the same time.
Fix this race, but still there are races which can not
be fixed without rewriting the whole aggregation reorder
logic, for now fix the obvious ones.

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/core.h | 12 +++++++++---
 drivers/net/wireless/ath/ath6kl/txrx.c | 12 +++++++++---
 2 files changed, 18 insertions(+), 6 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 17a44fad859b..12441f7d9036 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -273,9 +273,15 @@ struct rxtid {
 	struct sk_buff_head q;
 
 	/*
-	 * FIXME: No clue what this should protect. Apparently it should
-	 * protect some of the fields above but they are also accessed
-	 * without taking the lock.
+	 * lock mainly protects seq_next and hold_q. Movement of seq_next
+	 * needs to be protected between aggr_timeout() and
+	 * aggr_process_recv_frm(). hold_q will be holding the pending
+	 * reorder frames and it's access should also be protected.
+	 * Some of the other fields like hold_q_sz, win_sz and aggr are
+	 * initialized/reset when receiving addba/delba req, also while
+	 * deleting aggr state all the pending buffers are flushed before
+	 * resetting these fields, so there should not be any race in accessing
+	 * these fields.
 	 */
 	spinlock_t lock;
 };
diff --git a/drivers/net/wireless/ath/ath6kl/txrx.c b/drivers/net/wireless/ath/ath6kl/txrx.c
index 67206aedea6c..974c51053a71 100644
--- a/drivers/net/wireless/ath/ath6kl/txrx.c
+++ b/drivers/net/wireless/ath/ath6kl/txrx.c
@@ -1036,6 +1036,7 @@ static void aggr_deque_frms(struct aggr_info_conn *agg_conn, u8 tid,
 	rxtid = &agg_conn->rx_tid[tid];
 	stats = &agg_conn->stat[tid];
 
+	spin_lock_bh(&rxtid->lock);
 	idx = AGGR_WIN_IDX(rxtid->seq_next, rxtid->hold_q_sz);
 
 	/*
@@ -1054,8 +1055,6 @@ static void aggr_deque_frms(struct aggr_info_conn *agg_conn, u8 tid,
 	seq_end = seq_no ? seq_no : rxtid->seq_next;
 	idx_end = AGGR_WIN_IDX(seq_end, rxtid->hold_q_sz);
 
-	spin_lock_bh(&rxtid->lock);
-
 	do {
 		node = &rxtid->hold_q[idx];
 		if ((order == 1) && (!node->skb))
@@ -1127,11 +1126,13 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 		    ((end > extended_end) && (cur > extended_end) &&
 		     (cur < end))) {
 			aggr_deque_frms(agg_conn, tid, 0, 0);
+			spin_lock_bh(&rxtid->lock);
 			if (cur >= rxtid->hold_q_sz - 1)
 				rxtid->seq_next = cur - (rxtid->hold_q_sz - 1);
 			else
 				rxtid->seq_next = ATH6KL_MAX_SEQ_NO -
 						  (rxtid->hold_q_sz - 2 - cur);
+			spin_unlock_bh(&rxtid->lock);
 		} else {
 			/*
 			 * Dequeue only those frames that are outside the
@@ -1186,7 +1187,8 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 
 	if (agg_conn->timer_scheduled)
 		rxtid->progress = true;
-	else
+	else {
+		spin_lock_bh(&rxtid->lock);
 		for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
 			if (rxtid->hold_q[idx].skb) {
 				/*
@@ -1204,6 +1206,8 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 				break;
 			}
 		}
+		spin_unlock_bh(&rxtid->lock);
+	}
 
 	return is_queued;
 }
@@ -1626,6 +1630,7 @@ static void aggr_timeout(unsigned long arg)
 		rxtid = &aggr_conn->rx_tid[i];
 
 		if (rxtid->aggr && rxtid->hold_q) {
+			spin_lock_bh(&rxtid->lock);
 			for (j = 0; j < rxtid->hold_q_sz; j++) {
 				if (rxtid->hold_q[j].skb) {
 					aggr_conn->timer_scheduled = true;
@@ -1634,6 +1639,7 @@ static void aggr_timeout(unsigned long arg)
 					break;
 				}
 			}
+			spin_unlock_bh(&rxtid->lock);
 
 			if (j >= rxtid->hold_q_sz)
 				rxtid->timer_mon = false;
-- 
cgit v1.2.3-70-g09d2


From 7940bad50859026c0f11d2b7766571175b5e55c3 Mon Sep 17 00:00:00 2001
From: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Date: Wed, 30 May 2012 12:27:12 +0530
Subject: ath6kl: Fix unstable downlink throughput

There is frequent downlink throughput drop to 0 when operating
at the signal level between -42dBm to -53dBm. This has been root
caused to the delay in releasing pending a-mpdu subframes in
reorder buffer. Right now the timeout value is 400ms, there
is also a race condition where timeout handler can be delayed
to run at an extra timeout interval. This patch reduces the
timout interval to reasonable 100ms and makes sure releasing
pending frames are not skipped in the timeout handler by removing
the flag (rxtid->progress) which can delay the timeout logic.

Reported-by: Yu Yanzhi <yanzhiy@qca.qualcomm.com>
Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/core.h |  3 +--
 drivers/net/wireless/ath/ath6kl/txrx.c | 42 +++++++++++++++-------------------
 2 files changed, 19 insertions(+), 26 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h
index 12441f7d9036..b3eee10cf016 100644
--- a/drivers/net/wireless/ath/ath6kl/core.h
+++ b/drivers/net/wireless/ath/ath6kl/core.h
@@ -215,7 +215,7 @@ enum ath6kl_hw_flags {
 
 #define AGGR_NUM_OF_FREE_NETBUFS    16
 
-#define AGGR_RX_TIMEOUT     400	/* in ms */
+#define AGGR_RX_TIMEOUT     100	/* in ms */
 
 #define WMI_TIMEOUT (2 * HZ)
 
@@ -264,7 +264,6 @@ struct skb_hold_q {
 
 struct rxtid {
 	bool aggr;
-	bool progress;
 	bool timer_mon;
 	u16 win_sz;
 	u16 seq_next;
diff --git a/drivers/net/wireless/ath/ath6kl/txrx.c b/drivers/net/wireless/ath/ath6kl/txrx.c
index 974c51053a71..7dfa0fd86d7b 100644
--- a/drivers/net/wireless/ath/ath6kl/txrx.c
+++ b/drivers/net/wireless/ath/ath6kl/txrx.c
@@ -1186,28 +1186,25 @@ static bool aggr_process_recv_frm(struct aggr_info_conn *agg_conn, u8 tid,
 	aggr_deque_frms(agg_conn, tid, 0, 1);
 
 	if (agg_conn->timer_scheduled)
-		rxtid->progress = true;
-	else {
-		spin_lock_bh(&rxtid->lock);
-		for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
-			if (rxtid->hold_q[idx].skb) {
-				/*
-				 * There is a frame in the queue and no
-				 * timer so start a timer to ensure that
-				 * the frame doesn't remain stuck
-				 * forever.
-				 */
-				agg_conn->timer_scheduled = true;
-				mod_timer(&agg_conn->timer,
-					  (jiffies +
-					   HZ * (AGGR_RX_TIMEOUT) / 1000));
-				rxtid->progress = false;
-				rxtid->timer_mon = true;
-				break;
-			}
+		return is_queued;
+
+	spin_lock_bh(&rxtid->lock);
+	for (idx = 0 ; idx < rxtid->hold_q_sz; idx++) {
+		if (rxtid->hold_q[idx].skb) {
+			/*
+			 * There is a frame in the queue and no
+			 * timer so start a timer to ensure that
+			 * the frame doesn't remain stuck
+			 * forever.
+			 */
+			agg_conn->timer_scheduled = true;
+			mod_timer(&agg_conn->timer,
+				  (jiffies + (HZ * AGGR_RX_TIMEOUT) / 1000));
+			rxtid->timer_mon = true;
+			break;
 		}
-		spin_unlock_bh(&rxtid->lock);
 	}
+	spin_unlock_bh(&rxtid->lock);
 
 	return is_queued;
 }
@@ -1612,7 +1609,7 @@ static void aggr_timeout(unsigned long arg)
 		rxtid = &aggr_conn->rx_tid[i];
 		stats = &aggr_conn->stat[i];
 
-		if (!rxtid->aggr || !rxtid->timer_mon || rxtid->progress)
+		if (!rxtid->aggr || !rxtid->timer_mon)
 			continue;
 
 		stats->num_timeouts++;
@@ -1635,7 +1632,6 @@ static void aggr_timeout(unsigned long arg)
 				if (rxtid->hold_q[j].skb) {
 					aggr_conn->timer_scheduled = true;
 					rxtid->timer_mon = true;
-					rxtid->progress = false;
 					break;
 				}
 			}
@@ -1666,7 +1662,6 @@ static void aggr_delete_tid_state(struct aggr_info_conn *aggr_conn, u8 tid)
 		aggr_deque_frms(aggr_conn, tid, 0, 0);
 
 	rxtid->aggr = false;
-	rxtid->progress = false;
 	rxtid->timer_mon = false;
 	rxtid->win_sz = 0;
 	rxtid->seq_next = 0;
@@ -1745,7 +1740,6 @@ void aggr_conn_init(struct ath6kl_vif *vif, struct aggr_info *aggr_info,
 	for (i = 0; i < NUM_OF_TIDS; i++) {
 		rxtid = &aggr_conn->rx_tid[i];
 		rxtid->aggr = false;
-		rxtid->progress = false;
 		rxtid->timer_mon = false;
 		skb_queue_head_init(&rxtid->q);
 		spin_lock_init(&rxtid->lock);
-- 
cgit v1.2.3-70-g09d2


From b5b6f6a9a07ac230d54a85a9fb9e691c85f2eb0a Mon Sep 17 00:00:00 2001
From: Naveen Singh <navesing@qca.qualcomm.com>
Date: Thu, 7 Jun 2012 00:44:02 -0700
Subject: ath6kl: use firmware version from FW IE

Need to have different FW versioning for different FW binaries.
This is handled by appending different meta data in firmware
binaries.

kvalo: add an empty line before a debug message, use '0' instead of '0x00',
fix indentation

Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c |  8 ++++++++
 drivers/net/wireless/ath/ath6kl/main.c | 22 +++++++++++++---------
 2 files changed, 21 insertions(+), 9 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index daf24ee9d28a..62e25ccd1016 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -943,6 +943,14 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 		}
 
 		switch (ie_id) {
+		case ATH6KL_FW_IE_FW_VERSION:
+			strlcpy(ar->wiphy->fw_version, data,
+				sizeof(ar->wiphy->fw_version));
+
+			ath6kl_dbg(ATH6KL_DBG_BOOT,
+				   "found fw version %s\n",
+				    ar->wiphy->fw_version);
+			break;
 		case ATH6KL_FW_IE_OTP_IMAGE:
 			ath6kl_dbg(ATH6KL_DBG_BOOT, "found otp image ie (%zd B)\n",
 				   ie_len);
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index 3e6768ae80af..45621baca24a 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -554,20 +554,24 @@ void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver,
 	struct ath6kl *ar = devt;
 
 	memcpy(ar->mac_addr, datap, ETH_ALEN);
-	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: mac addr = %pM\n",
-		   __func__, ar->mac_addr);
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT,
+		   "ready event mac addr %pM sw_ver 0x%x abi_ver 0x%x cap 0x%x\n",
+		   ar->mac_addr, sw_ver, abi_ver, cap);
 
 	ar->version.wlan_ver = sw_ver;
 	ar->version.abi_ver = abi_ver;
 	ar->hw.cap = cap;
 
-	snprintf(ar->wiphy->fw_version,
-		 sizeof(ar->wiphy->fw_version),
-		 "%u.%u.%u.%u",
-		 (ar->version.wlan_ver & 0xf0000000) >> 28,
-		 (ar->version.wlan_ver & 0x0f000000) >> 24,
-		 (ar->version.wlan_ver & 0x00ff0000) >> 16,
-		 (ar->version.wlan_ver & 0x0000ffff));
+	if (strlen(ar->wiphy->fw_version) == 0) {
+		snprintf(ar->wiphy->fw_version,
+			 sizeof(ar->wiphy->fw_version),
+			 "%u.%u.%u.%u",
+			 (ar->version.wlan_ver & 0xf0000000) >> 28,
+			 (ar->version.wlan_ver & 0x0f000000) >> 24,
+			 (ar->version.wlan_ver & 0x00ff0000) >> 16,
+			 (ar->version.wlan_ver & 0x0000ffff));
+	}
 
 	/* indicate to the waiting thread that the ready event was received */
 	set_bit(WMI_READY, &ar->flag);
-- 
cgit v1.2.3-70-g09d2


From c85251f8562095cd6fd63ae786354283c5318303 Mon Sep 17 00:00:00 2001
From: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Date: Mon, 11 Jun 2012 13:36:12 -0700
Subject: ath6kl: fix fw capability parsing

This patch fixes a bug where no capabilites are parsed when the number
of firmware capability bits translate into fewer bytes than the host has
knowledge of. Instead just process number of capability bytes as
reported by the firmware.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---
 drivers/net/wireless/ath/ath6kl/init.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/net/wireless')

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index 62e25ccd1016..f90b5db741cf 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -1004,9 +1004,6 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 				   ar->hw.reserved_ram_size);
 			break;
 		case ATH6KL_FW_IE_CAPABILITIES:
-			if (ie_len < DIV_ROUND_UP(ATH6KL_FW_CAPABILITY_MAX, 8))
-				break;
-
 			ath6kl_dbg(ATH6KL_DBG_BOOT,
 				   "found firmware capabilities ie (%zd B)\n",
 				   ie_len);
@@ -1015,6 +1012,9 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 				index = i / 8;
 				bit = i % 8;
 
+				if (index == ie_len)
+					break;
+
 				if (data[index] & (1 << bit))
 					__set_bit(i, ar->fw_capabilities);
 			}
-- 
cgit v1.2.3-70-g09d2