From bad7dcd94f3956bcfc0a69ef71fdf0fcca3de4a8 Mon Sep 17 00:00:00 2001
From: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Date: Wed, 12 Sep 2018 16:21:40 +0100
Subject: ACPI/PCI: Pay attention to device-specific _PXM node values
The ACPI specification allows you to provide _PXM entries for devices based
on their location on a particular bus. Let us use that if it is provided
rather than just assuming it makes sense to put the device into the
proximity domain of the root.
An example DSDT entry that will supply this is:
Device (PCI2)
{
Name (_HID, "PNP0A08") // PCI Express Root Bridge
Name (_CID, "PNP0A03") // Compatible PCI Root Bridge
Name(_SEG, 2) // Segment of this Root complex
Name(_BBN, 0xF8) // Base Bus Number
Name(_CCA, 1)
Method (_PXM, 0, NotSerialized) {
Return(0x00)
}
...
Device (BRI0) {
Name (_HID, "19E51610")
Name (_ADR, 0)
Name (_BBN, 0xF9)
Device (CAR0) {
Name (_HID, "97109912")
Name (_ADR, 0)
Method (_PXM, 0, NotSerialized) {
Return(0x02)
}
}
}
}
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pci-acpi.c | 5 +++++
1 file changed, 5 insertions(+)
(limited to 'drivers/pci')
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c2ab57705043..8f75ba068d45 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -751,10 +751,15 @@ static void pci_acpi_setup(struct device *dev)
{
struct pci_dev *pci_dev = to_pci_dev(dev);
struct acpi_device *adev = ACPI_COMPANION(dev);
+ int node;
if (!adev)
return;
+ node = acpi_get_node(adev->handle);
+ if (node != NUMA_NO_NODE)
+ set_dev_node(dev, node);
+
pci_acpi_optimize_delay(pci_dev, adev->handle);
pci_acpi_add_pm_notifier(adev, pci_dev);
--
cgit v1.2.3-70-g09d2
From d6112f8def514e019658bcc9b57d53acdb71ca3f Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@linux.intel.com>
Date: Fri, 7 Sep 2018 09:16:51 +0300
Subject: PCI: Add support for Immediate Readiness
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
PCIe r4.0, sec 7.5.1.1.4 defines a new bit in the Status Register:
Immediate Readiness – This optional bit, when Set, indicates the Function
is guaranteed to be ready to successfully complete valid configuration
accesses at any time following any reset that the host is capable of
issuing Configuration Requests to this Function.
When this bit is Set, for accesses to this Function, software is exempt
from all requirements to delay configuration accesses following any type
of reset, including but not limited to the timing requirements defined in
Section 6.6.
This means that all delays after a Conventional or Function Reset can be
skipped.
This patch reads such bit and caches its value in a flag inside struct
pci_dev to be checked later if we should delay or can skip delays after a
reset. While at that, also move the explicit msleep(100) call from
pcie_flr() and pci_af_flr() to pci_dev_wait().
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
[bhelgaas: rename PCI_STATUS_IMMEDIATE to PCI_STATUS_IMM_READY]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
drivers/pci/pci.c | 13 ++++++++++++-
include/linux/pci.h | 1 +
include/uapi/linux/pci_regs.h | 1 +
3 files changed, 14 insertions(+), 1 deletion(-)
(limited to 'drivers/pci')
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 1835f3a7aa8d..ee7c2f4eef9b 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -999,7 +999,7 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state)
* because have already delayed for the bridge.
*/
if (dev->runtime_d3cold) {
- if (dev->d3cold_delay)
+ if (dev->d3cold_delay && !dev->imm_ready)
msleep(dev->d3cold_delay);
/*
* When powering on a bridge from D3cold, the
@@ -2644,6 +2644,7 @@ EXPORT_SYMBOL_GPL(pci_d3cold_disable);
void pci_pm_init(struct pci_dev *dev)
{
int pm;
+ u16 status;
u16 pmc;
pm_runtime_forbid(&dev->dev);
@@ -2706,6 +2707,10 @@ void pci_pm_init(struct pci_dev *dev)
/* Disable the PME# generation functionality */
pci_pme_active(dev, false);
}
+
+ pci_read_config_word(dev, PCI_STATUS, &status);
+ if (status & PCI_STATUS_IMM_READY)
+ dev->imm_ready = 1;
}
static unsigned long pci_ea_flags(struct pci_dev *dev, u8 prop)
@@ -4376,6 +4381,9 @@ int pcie_flr(struct pci_dev *dev)
pcie_capability_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR);
+ if (dev->imm_ready)
+ return 0;
+
/*
* Per PCIe r4.0, sec 6.6.2, a device must complete an FLR within
* 100ms, but may silently discard requests while the FLR is in
@@ -4417,6 +4425,9 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
pci_write_config_byte(dev, pos + PCI_AF_CTRL, PCI_AF_CTRL_FLR);
+ if (dev->imm_ready)
+ return 0;
+
/*
* Per Advanced Capabilities for Conventional PCI ECN, 13 April 2006,
* updated 27 July 2006; a device must complete an FLR within
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 6925828f9f25..60da5d7d4310 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -325,6 +325,7 @@ struct pci_dev {
pci_power_t current_state; /* Current operating state. In ACPI,
this is D0-D3, D0 being fully
functional, and D3 being off. */
+ unsigned int imm_ready:1; /* Supports Immediate Readiness */
u8 pm_cap; /* PM capability offset */
unsigned int pme_support:5; /* Bitmask of states from which PME#
can be generated */
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index ee556ccc93f4..e1e9888c85e6 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -52,6 +52,7 @@
#define PCI_COMMAND_INTX_DISABLE 0x400 /* INTx Emulation Disable */
#define PCI_STATUS 0x06 /* 16 bits */
+#define PCI_STATUS_IMM_READY 0x01 /* Immediate Readiness */
#define PCI_STATUS_INTERRUPT 0x08 /* Interrupt status */
#define PCI_STATUS_CAP_LIST 0x10 /* Support Capability List */
#define PCI_STATUS_66MHZ 0x20 /* Support 66 MHz PCI 2.1 bus */
--
cgit v1.2.3-70-g09d2