From 08218a081e6a95995f9f5de8456c243b92fec335 Mon Sep 17 00:00:00 2001 From: Sibi Sankar Date: Thu, 29 Apr 2021 16:21:04 +0530 Subject: reset: qcom: Add PDC Global reset signals for WPSS Add PDC Global reset signals for Wireless Processor Subsystem (WPSS) on SC7280 SoCs. Acked-by: Philipp Zabel Reviewed-by: Philipp Zabel Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/1619693465-5724-5-git-send-email-sibis@codeaurora.org Signed-off-by: Philipp Zabel --- drivers/reset/reset-qcom-pdc.c | 62 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 11 deletions(-) (limited to 'drivers/reset') diff --git a/drivers/reset/reset-qcom-pdc.c b/drivers/reset/reset-qcom-pdc.c index ab74bccd4a5b..f22bb49a4ac8 100644 --- a/drivers/reset/reset-qcom-pdc.c +++ b/drivers/reset/reset-qcom-pdc.c @@ -11,18 +11,26 @@ #include -#define RPMH_PDC_SYNC_RESET 0x100 +#define RPMH_SDM845_PDC_SYNC_RESET 0x100 +#define RPMH_SC7280_PDC_SYNC_RESET 0x1000 struct qcom_pdc_reset_map { u8 bit; }; +struct qcom_pdc_reset_desc { + const struct qcom_pdc_reset_map *resets; + size_t num_resets; + unsigned int offset; +}; + struct qcom_pdc_reset_data { struct reset_controller_dev rcdev; struct regmap *regmap; + const struct qcom_pdc_reset_desc *desc; }; -static const struct regmap_config sdm845_pdc_regmap_config = { +static const struct regmap_config pdc_regmap_config = { .name = "pdc-reset", .reg_bits = 32, .reg_stride = 4, @@ -44,6 +52,33 @@ static const struct qcom_pdc_reset_map sdm845_pdc_resets[] = { [PDC_MODEM_SYNC_RESET] = {9}, }; +static const struct qcom_pdc_reset_desc sdm845_pdc_reset_desc = { + .resets = sdm845_pdc_resets, + .num_resets = ARRAY_SIZE(sdm845_pdc_resets), + .offset = RPMH_SDM845_PDC_SYNC_RESET, +}; + +static const struct qcom_pdc_reset_map sc7280_pdc_resets[] = { + [PDC_APPS_SYNC_RESET] = {0}, + [PDC_SP_SYNC_RESET] = {1}, + [PDC_AUDIO_SYNC_RESET] = {2}, + [PDC_SENSORS_SYNC_RESET] = {3}, + [PDC_AOP_SYNC_RESET] = {4}, + [PDC_DEBUG_SYNC_RESET] = {5}, + [PDC_GPU_SYNC_RESET] = {6}, + [PDC_DISPLAY_SYNC_RESET] = {7}, + [PDC_COMPUTE_SYNC_RESET] = {8}, + [PDC_MODEM_SYNC_RESET] = {9}, + [PDC_WLAN_RF_SYNC_RESET] = {10}, + [PDC_WPSS_SYNC_RESET] = {11}, +}; + +static const struct qcom_pdc_reset_desc sc7280_pdc_reset_desc = { + .resets = sc7280_pdc_resets, + .num_resets = ARRAY_SIZE(sc7280_pdc_resets), + .offset = RPMH_SC7280_PDC_SYNC_RESET, +}; + static inline struct qcom_pdc_reset_data *to_qcom_pdc_reset_data( struct reset_controller_dev *rcdev) { @@ -54,19 +89,18 @@ static int qcom_pdc_control_assert(struct reset_controller_dev *rcdev, unsigned long idx) { struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev); + u32 mask = BIT(data->desc->resets[idx].bit); - return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET, - BIT(sdm845_pdc_resets[idx].bit), - BIT(sdm845_pdc_resets[idx].bit)); + return regmap_update_bits(data->regmap, data->desc->offset, mask, mask); } static int qcom_pdc_control_deassert(struct reset_controller_dev *rcdev, unsigned long idx) { struct qcom_pdc_reset_data *data = to_qcom_pdc_reset_data(rcdev); + u32 mask = BIT(data->desc->resets[idx].bit); - return regmap_update_bits(data->regmap, RPMH_PDC_SYNC_RESET, - BIT(sdm845_pdc_resets[idx].bit), 0); + return regmap_update_bits(data->regmap, data->desc->offset, mask, 0); } static const struct reset_control_ops qcom_pdc_reset_ops = { @@ -76,22 +110,27 @@ static const struct reset_control_ops qcom_pdc_reset_ops = { static int qcom_pdc_reset_probe(struct platform_device *pdev) { + const struct qcom_pdc_reset_desc *desc; struct qcom_pdc_reset_data *data; struct device *dev = &pdev->dev; void __iomem *base; struct resource *res; + desc = device_get_match_data(&pdev->dev); + if (!desc) + return -EINVAL; + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; + data->desc = desc; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); - data->regmap = devm_regmap_init_mmio(dev, base, - &sdm845_pdc_regmap_config); + data->regmap = devm_regmap_init_mmio(dev, base, &pdc_regmap_config); if (IS_ERR(data->regmap)) { dev_err(dev, "Unable to initialize regmap\n"); return PTR_ERR(data->regmap); @@ -99,14 +138,15 @@ static int qcom_pdc_reset_probe(struct platform_device *pdev) data->rcdev.owner = THIS_MODULE; data->rcdev.ops = &qcom_pdc_reset_ops; - data->rcdev.nr_resets = ARRAY_SIZE(sdm845_pdc_resets); + data->rcdev.nr_resets = desc->num_resets; data->rcdev.of_node = dev->of_node; return devm_reset_controller_register(dev, &data->rcdev); } static const struct of_device_id qcom_pdc_reset_of_match[] = { - { .compatible = "qcom,sdm845-pdc-global" }, + { .compatible = "qcom,sc7280-pdc-global", .data = &sc7280_pdc_reset_desc }, + { .compatible = "qcom,sdm845-pdc-global", .data = &sdm845_pdc_reset_desc }, {} }; MODULE_DEVICE_TABLE(of, qcom_pdc_reset_of_match); -- cgit v1.2.3-70-g09d2 From bee08559701fb98b43d7061717e7c3131230aa69 Mon Sep 17 00:00:00 2001 From: Biju Das Date: Mon, 19 Jul 2021 13:19:32 +0100 Subject: reset: renesas: Add RZ/G2L usbphy control driver Add support for RZ/G2L USBPHY Control driver. It mainly controls reset and power down of the USB/PHY. Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Link: https://lore.kernel.org/r/20210719121938.6532-5-biju.das.jz@bp.renesas.com Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 7 ++ drivers/reset/Makefile | 1 + drivers/reset/reset-rzg2l-usbphy-ctrl.c | 175 ++++++++++++++++++++++++++++++++ 3 files changed, 183 insertions(+) create mode 100644 drivers/reset/reset-rzg2l-usbphy-ctrl.c (limited to 'drivers/reset') diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 328f70f633eb..ed65ea66987b 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -181,6 +181,13 @@ config RESET_RASPBERRYPI interfacing with RPi4's co-processor and model these firmware initialization routines as reset lines. +config RESET_RZG2L_USBPHY_CTRL + tristate "Renesas RZ/G2L USBPHY control driver" + depends on ARCH_R9A07G044 || COMPILE_TEST + help + Support for USBPHY Control found on RZ/G2L family. It mainly + controls reset and power down of the USB/PHY. + config RESET_SCMI tristate "Reset driver controlled via ARM SCMI interface" depends on ARM_SCMI_PROTOCOL || COMPILE_TEST diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index ea8b8d9ca565..21d46d8869ff 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -25,6 +25,7 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o obj-$(CONFIG_RESET_QCOM_AOSS) += reset-qcom-aoss.o obj-$(CONFIG_RESET_QCOM_PDC) += reset-qcom-pdc.o obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o +obj-$(CONFIG_RESET_RZG2L_USBPHY_CTRL) += reset-rzg2l-usbphy-ctrl.o obj-$(CONFIG_RESET_SCMI) += reset-scmi.o obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c b/drivers/reset/reset-rzg2l-usbphy-ctrl.c new file mode 100644 index 000000000000..e0704fd2b533 --- /dev/null +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c @@ -0,0 +1,175 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Renesas RZ/G2L USBPHY control driver + * + * Copyright (C) 2021 Renesas Electronics Corporation + */ + +#include +#include +#include +#include +#include +#include +#include + +#define RESET 0x000 + +#define RESET_SEL_PLLRESET BIT(12) +#define RESET_PLLRESET BIT(8) + +#define RESET_SEL_P2RESET BIT(5) +#define RESET_SEL_P1RESET BIT(4) +#define RESET_PHYRST_2 BIT(1) +#define RESET_PHYRST_1 BIT(0) + +#define PHY_RESET_PORT2 (RESET_SEL_P2RESET | RESET_PHYRST_2) +#define PHY_RESET_PORT1 (RESET_SEL_P1RESET | RESET_PHYRST_1) + +#define NUM_PORTS 2 + +struct rzg2l_usbphy_ctrl_priv { + struct reset_controller_dev rcdev; + struct reset_control *rstc; + void __iomem *base; + + spinlock_t lock; +}; + +#define rcdev_to_priv(x) container_of(x, struct rzg2l_usbphy_ctrl_priv, rcdev) + +static int rzg2l_usbphy_ctrl_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + u32 port_mask = PHY_RESET_PORT1 | PHY_RESET_PORT2; + void __iomem *base = priv->base; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&priv->lock, flags); + val = readl(base + RESET); + val |= id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; + if (port_mask == (val & port_mask)) + val |= RESET_PLLRESET; + writel(val, base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + void __iomem *base = priv->base; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&priv->lock, flags); + val = readl(base + RESET); + + val |= RESET_SEL_PLLRESET; + val &= ~(RESET_PLLRESET | (id ? PHY_RESET_PORT2 : PHY_RESET_PORT1)); + writel(val, base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + struct rzg2l_usbphy_ctrl_priv *priv = rcdev_to_priv(rcdev); + u32 port_mask; + + port_mask = id ? PHY_RESET_PORT2 : PHY_RESET_PORT1; + + return !!(readl(priv->base + RESET) & port_mask); +} + +static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = { + { .compatible = "renesas,rzg2l-usbphy-ctrl" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table); + +static const struct reset_control_ops rzg2l_usbphy_ctrl_reset_ops = { + .assert = rzg2l_usbphy_ctrl_assert, + .deassert = rzg2l_usbphy_ctrl_deassert, + .status = rzg2l_usbphy_ctrl_status, +}; + +static int rzg2l_usbphy_ctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rzg2l_usbphy_ctrl_priv *priv; + unsigned long flags; + int error; + u32 val; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); + if (IS_ERR(priv->rstc)) + return dev_err_probe(dev, PTR_ERR(priv->rstc), + "failed to get reset\n"); + + reset_control_deassert(priv->rstc); + + priv->rcdev.ops = &rzg2l_usbphy_ctrl_reset_ops; + priv->rcdev.of_reset_n_cells = 1; + priv->rcdev.nr_resets = NUM_PORTS; + priv->rcdev.of_node = dev->of_node; + priv->rcdev.dev = dev; + + error = devm_reset_controller_register(dev, &priv->rcdev); + if (error) + return error; + + spin_lock_init(&priv->lock); + dev_set_drvdata(dev, priv); + + pm_runtime_enable(&pdev->dev); + pm_runtime_resume_and_get(&pdev->dev); + + /* put pll and phy into reset state */ + spin_lock_irqsave(&priv->lock, flags); + val = readl(priv->base + RESET); + val |= RESET_SEL_PLLRESET | RESET_PLLRESET | PHY_RESET_PORT2 | PHY_RESET_PORT1; + writel(val, priv->base + RESET); + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static int rzg2l_usbphy_ctrl_remove(struct platform_device *pdev) +{ + struct rzg2l_usbphy_ctrl_priv *priv = dev_get_drvdata(&pdev->dev); + + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + reset_control_assert(priv->rstc); + + return 0; +} + +static struct platform_driver rzg2l_usbphy_ctrl_driver = { + .driver = { + .name = "rzg2l_usbphy_ctrl", + .of_match_table = rzg2l_usbphy_ctrl_match_table, + }, + .probe = rzg2l_usbphy_ctrl_probe, + .remove = rzg2l_usbphy_ctrl_remove, +}; +module_platform_driver(rzg2l_usbphy_ctrl_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas RZ/G2L USBPHY Control"); +MODULE_AUTHOR("biju.das.jz@bp.renesas.com>"); -- cgit v1.2.3-70-g09d2 From 09f3824342f665d222fb7ac17c91f8334779630b Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sat, 21 Aug 2021 10:45:28 +0100 Subject: reset: simple: remove ZTE details in Kconfig help The ZTE platform support in the simple reset driver has been removed but the comment in the help wasn't removed so clean this up too. Fixes: 89d4f98ae90d ("ARM: remove zte zx platform") Signed-off-by: Peter Robinson Acked-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210821094528.294579-1-pbrobinson@gmail.com Signed-off-by: Philipp Zabel --- drivers/reset/Kconfig | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/reset') diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index ed65ea66987b..1af8a7e4c601 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -214,7 +214,6 @@ config RESET_SIMPLE - Realtek SoCs - RCC reset controller in STM32 MCUs - Allwinner SoCs - - ZTE's zx2967 family - SiFive FU740 SoCs config RESET_SOCFPGA -- cgit v1.2.3-70-g09d2