From 1e793f6fc0db920400574211c48f9157a37e3945 Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Fri, 21 Oct 2016 06:33:32 -0700 Subject: scsi: megaraid_sas: Fix data integrity failure for JBOD (passthrough) devices Commit 02b01e010afe ("megaraid_sas: return sync cache call with success") modified the driver to successfully complete SYNCHRONIZE_CACHE commands without passing them to the controller. Disk drive caches are only explicitly managed by controller firmware when operating in RAID mode. So this commit effectively disabled writeback cache flushing for any drives used in JBOD mode, leading to data integrity failures. [mkp: clarified patch description] Fixes: 02b01e010afeeb49328d35650d70721d2ca3fd59 CC: stable@vger.kernel.org Signed-off-by: Kashyap Desai Signed-off-by: Sumit Saxena Reviewed-by: Tomas Henzl Reviewed-by: Hannes Reinecke Reviewed-by: Ewan D. Milne Signed-off-by: Martin K. Petersen --- drivers/scsi/megaraid/megaraid_sas_base.c | 13 +++++-------- 1 file changed, 5 insertions(+), 8 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 9ff57dee72d7..d8b1fbd4c8aa 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1700,16 +1700,13 @@ megasas_queue_command(struct Scsi_Host *shost, struct scsi_cmnd *scmd) goto out_done; } - switch (scmd->cmnd[0]) { - case SYNCHRONIZE_CACHE: - /* - * FW takes care of flush cache on its own - * No need to send it down - */ + /* + * FW takes care of flush cache on its own for Virtual Disk. + * No need to send it down for VD. For JBOD send SYNCHRONIZE_CACHE to FW. + */ + if ((scmd->cmnd[0] == SYNCHRONIZE_CACHE) && MEGASAS_IS_LOGICAL(scmd)) { scmd->result = DID_OK << 16; goto out_done; - default: - break; } return instance->instancet->build_and_issue_cmd(instance, scmd); -- cgit v1.2.3-70-g09d2 From 4d2b496f19f3c2cfaca1e8fa0710688b5ff3811d Mon Sep 17 00:00:00 2001 From: "Ewan D. Milne" Date: Wed, 26 Oct 2016 11:22:53 -0400 Subject: scsi: scsi_debug: Fix memory leak if LBP enabled and module is unloaded map_storep was not being vfree()'d in the module_exit call. Cc: Signed-off-by: Ewan D. Milne Reviewed-by: Laurence Oberman Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_debug.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/scsi') diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index c905709707f0..cf04a364fd8b 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -5134,6 +5134,7 @@ static void __exit scsi_debug_exit(void) bus_unregister(&pseudo_lld_bus); root_device_unregister(pseudo_primary); + vfree(map_storep); vfree(dif_storep); vfree(fake_storep); kfree(sdebug_q_arr); -- cgit v1.2.3-70-g09d2 From 2bf7dc8443e113844d078fd6541b7f4aa544f92f Mon Sep 17 00:00:00 2001 From: Ching Huang Date: Wed, 19 Oct 2016 17:50:26 +0800 Subject: scsi: arcmsr: Send SYNCHRONIZE_CACHE command to firmware The arcmsr driver failed to pass SYNCHRONIZE CACHE to controller firmware. Depending on how drive caches are handled internally by controller firmware this could potentially lead to data integrity problems. Ensure that cache flushes are passed to the controller. [mkp: applied by hand and removed unused vars] Cc: Signed-off-by: Ching Huang Reported-by: Tomas Henzl Signed-off-by: Martin K. Petersen --- drivers/scsi/arcmsr/arcmsr_hba.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/scsi') diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c index 3d53d636b17b..f0cfb0451757 100644 --- a/drivers/scsi/arcmsr/arcmsr_hba.c +++ b/drivers/scsi/arcmsr/arcmsr_hba.c @@ -2636,18 +2636,9 @@ static int arcmsr_queue_command_lck(struct scsi_cmnd *cmd, struct AdapterControlBlock *acb = (struct AdapterControlBlock *) host->hostdata; struct CommandControlBlock *ccb; int target = cmd->device->id; - int lun = cmd->device->lun; - uint8_t scsicmd = cmd->cmnd[0]; cmd->scsi_done = done; cmd->host_scribble = NULL; cmd->result = 0; - if ((scsicmd == SYNCHRONIZE_CACHE) ||(scsicmd == SEND_DIAGNOSTIC)){ - if(acb->devstate[target][lun] == ARECA_RAID_GONE) { - cmd->result = (DID_NO_CONNECT << 16); - } - cmd->scsi_done(cmd); - return 0; - } if (target == 16) { /* virtual device for iop message transfer */ arcmsr_handle_virtual_command(acb, cmd); -- cgit v1.2.3-70-g09d2