From 12b591bccc463307a21d925c19e7f61982902e08 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Thu, 29 Aug 2019 17:22:36 +0800 Subject: usb: common: create Kconfig file Create Kconfig file for USB common core, and move USB_LED_TRIG and USB_ULPI_BUS configs into the new file from the parent Kconfig, it will help to add new configs later. Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1567070558-29417-10-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Kconfig | 35 +---------------------------------- drivers/usb/common/Kconfig | 38 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 34 deletions(-) create mode 100644 drivers/usb/common/Kconfig (limited to 'drivers') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index fc1c66af6f0a..275568abc670 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -36,8 +36,7 @@ menuconfig USB_SUPPORT if USB_SUPPORT -config USB_COMMON - tristate +source "drivers/usb/common/Kconfig" config USB_ARCH_HAS_HCD def_bool y @@ -175,36 +174,4 @@ source "drivers/usb/typec/Kconfig" source "drivers/usb/roles/Kconfig" -config USB_LED_TRIG - bool "USB LED Triggers" - depends on LEDS_CLASS && LEDS_TRIGGERS - select USB_COMMON - help - This option adds LED triggers for USB host and/or gadget activity. - - Say Y here if you are working on a system with led-class supported - LEDs and you want to use them as activity indicators for USB host or - gadget. - -config USB_ULPI_BUS - tristate "USB ULPI PHY interface support" - select USB_COMMON - help - UTMI+ Low Pin Interface (ULPI) is specification for a commonly used - USB 2.0 PHY interface. The ULPI specification defines a standard set - of registers that can be used to detect the vendor and product which - allows ULPI to be handled as a bus. This module is the driver for that - bus. - - The ULPI interfaces (the buses) are registered by the drivers for USB - controllers which support ULPI register access and have ULPI PHY - attached to them. The ULPI PHY drivers themselves are normal PHY - drivers. - - ULPI PHYs provide often functions such as ADP sensing/probing (OTG - protocol) and USB charger detection. - - To compile this driver as a module, choose M here: the module will - be called ulpi. - endif # USB_SUPPORT diff --git a/drivers/usb/common/Kconfig b/drivers/usb/common/Kconfig new file mode 100644 index 000000000000..848545b099cf --- /dev/null +++ b/drivers/usb/common/Kconfig @@ -0,0 +1,38 @@ +# SPDX-License-Identifier: GPL-2.0 + +config USB_COMMON + tristate + + +config USB_LED_TRIG + bool "USB LED Triggers" + depends on LEDS_CLASS && LEDS_TRIGGERS + select USB_COMMON + help + This option adds LED triggers for USB host and/or gadget activity. + + Say Y here if you are working on a system with led-class supported + LEDs and you want to use them as activity indicators for USB host or + gadget. + +config USB_ULPI_BUS + tristate "USB ULPI PHY interface support" + select USB_COMMON + help + UTMI+ Low Pin Interface (ULPI) is specification for a commonly used + USB 2.0 PHY interface. The ULPI specification defines a standard set + of registers that can be used to detect the vendor and product which + allows ULPI to be handled as a bus. This module is the driver for that + bus. + + The ULPI interfaces (the buses) are registered by the drivers for USB + controllers which support ULPI register access and have ULPI PHY + attached to them. The ULPI PHY drivers themselves are normal PHY + drivers. + + ULPI PHYs provide often functions such as ADP sensing/probing (OTG + protocol) and USB charger detection. + + To compile this driver as a module, choose M here: the module will + be called ulpi. + -- cgit v1.2.3-70-g09d2