From 269e4a4122685d0739f0e8e53b440111bf8a03f9 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Wed, 4 Sep 2013 13:37:43 +0300 Subject: spi/pxa2xx: check status register as well to determine if the device is off The current interrupt handler calls pm_runtime_suspended() to check if the device is suspended or not. However, runtime PM status of the device is only set to suspended once all PM runtime suspend hooks have executed. In case of Intel Lynxpoint we have the device bound to the ACPI power domain and its runtime suspend hook will put the device to D3hot (or D3cold if possible). This means that the device is powered off before its state is set to runtime suspended. While in this state the device might get an interrupt that is meant for another device (as the interrupt line is shared), and because the device is powered off accessing its registers will return 0xffffffff that the driver misinterprets as an invalid state. When this happens user will see messages like below on the console: pxa2xx-spi INT33C0:00: bad message state in interrupt handler Fix this by checking the status register for ~0 and returning IRQ_NONE in that case. Signed-off-by: Mika Westerberg Signed-off-by: Mark Brown --- drivers/spi/spi-pxa2xx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index 2eb06ee0b326..c1a50674c1e3 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -546,8 +546,17 @@ static irqreturn_t ssp_int(int irq, void *dev_id) if (pm_runtime_suspended(&drv_data->pdev->dev)) return IRQ_NONE; - sccr1_reg = read_SSCR1(reg); + /* + * If the device is not yet in RPM suspended state and we get an + * interrupt that is meant for another device, check if status bits + * are all set to one. That means that the device is already + * powered off. + */ status = read_SSSR(reg); + if (status == ~0) + return IRQ_NONE; + + sccr1_reg = read_SSCR1(reg); /* Ignore possible writes if we don't need to write */ if (!(sccr1_reg & SSCR1_TIE)) -- cgit v1.2.3-70-g09d2 From 9b4003a687abcf2fe25ba9073dd07345e4529183 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Tue, 10 Sep 2013 10:19:29 +0800 Subject: spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master Calling kfree() to clean up the memory obtained from spi_alloc_master() is wrong as this is done in spi_master_release() when spi_master->dev's refcount reaches zero. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index 5655acf55bfe..b597a92565dc 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -247,7 +247,6 @@ err_out: gpio_free(hw->chipselect[i]); spi_master_put(master); - kfree(master); return ret; } @@ -263,7 +262,6 @@ static int spi_clps711x_remove(struct platform_device *pdev) gpio_free(hw->chipselect[i]); spi_unregister_master(master); - kfree(master); return 0; } -- cgit v1.2.3-70-g09d2 From eadf69cf5e1cdd042fb7b7beeffa538a935373cd Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:39 +0800 Subject: spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe() Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-mpc512x-psc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-mpc512x-psc.c b/drivers/spi/spi-mpc512x-psc.c index dbc5e999a1f5..6adf4e35816d 100644 --- a/drivers/spi/spi-mpc512x-psc.c +++ b/drivers/spi/spi-mpc512x-psc.c @@ -522,8 +522,10 @@ static int mpc512x_psc_spi_do_probe(struct device *dev, u32 regaddr, psc_num = master->bus_num; snprintf(clk_name, sizeof(clk_name), "psc%d_mclk", psc_num); clk = devm_clk_get(dev, clk_name); - if (IS_ERR(clk)) + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); goto free_irq; + } ret = clk_prepare_enable(clk); if (ret) goto free_irq; -- cgit v1.2.3-70-g09d2 From 272bfbd54f29b9361b09dbd6b25ccbd1a30163f1 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 19:15:08 +0800 Subject: spi: fix return value check in dspi_probe() In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 6cd07d13ecab..4e44575bd87a 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -476,15 +476,9 @@ static int dspi_probe(struct platform_device *pdev) master->bus_num = bus_num; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get platform resource\n"); - ret = -EINVAL; - goto out_master_put; - } - dspi->base = devm_ioremap_resource(&pdev->dev, res); - if (!dspi->base) { - ret = -EINVAL; + if (IS_ERR(dspi->base)) { + ret = PTR_ERR(dspi->base); goto out_master_put; } -- cgit v1.2.3-70-g09d2 From 47d06e532e95b71c0db3839ebdef3fe8812fca2c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 10 Sep 2013 10:52:35 -0400 Subject: random: run random_int_secret_init() run after all late_initcalls The some platforms (e.g., ARM) initializes their clocks as late_initcalls for some unknown reason. So make sure random_int_secret_init() is run after all of the late_initcalls are run. Cc: stable@vger.kernel.org Signed-off-by: "Theodore Ts'o" --- drivers/char/random.c | 3 +-- include/linux/random.h | 1 + init/main.c | 2 ++ 3 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 0d91fe52f3f5..92e6c67e1ae6 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1462,12 +1462,11 @@ struct ctl_table random_table[] = { static u32 random_int_secret[MD5_MESSAGE_BYTES / 4] ____cacheline_aligned; -static int __init random_int_secret_init(void) +int random_int_secret_init(void) { get_random_bytes(random_int_secret, sizeof(random_int_secret)); return 0; } -late_initcall(random_int_secret_init); /* * Get a random word for internal kernel use only. Similar to urandom but diff --git a/include/linux/random.h b/include/linux/random.h index 3b9377d6b7a5..6312dd9ba449 100644 --- a/include/linux/random.h +++ b/include/linux/random.h @@ -17,6 +17,7 @@ extern void add_interrupt_randomness(int irq, int irq_flags); extern void get_random_bytes(void *buf, int nbytes); extern void get_random_bytes_arch(void *buf, int nbytes); void generate_random_uuid(unsigned char uuid_out[16]); +extern int random_int_secret_init(void); #ifndef MODULE extern const struct file_operations random_fops, urandom_fops; diff --git a/init/main.c b/init/main.c index d03d2ec2eacf..586cd3359c02 100644 --- a/init/main.c +++ b/init/main.c @@ -75,6 +75,7 @@ #include #include #include +#include #include #include @@ -778,6 +779,7 @@ static void __init do_basic_setup(void) do_ctors(); usermodehelper_enable(); do_initcalls(); + random_int_secret_init(); } static void __init do_pre_smp_initcalls(void) -- cgit v1.2.3-70-g09d2 From 19872d20c890073c5207d9e02bb8f14d451a11eb Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Mon, 9 Sep 2013 18:33:54 +0200 Subject: HID: uhid: allocate static minor udev has this nice feature of creating "dead" /dev/ device-nodes if it finds a devnode: modalias. Once the node is accessed, the kernel automatically loads the module that provides the node. However, this requires udev to know the major:minor code to use for the node. This feature was introduced by: commit 578454ff7eab61d13a26b568f99a89a2c9edc881 Author: Kay Sievers Date: Thu May 20 18:07:20 2010 +0200 driver core: add devname module aliases to allow module on-demand auto-loading However, uhid uses dynamic minor numbers so this doesn't actually work. We need to load uhid to know which minor it's going to use. Hence, allocate a static minor (just like uinput does) and we're good to go. Reported-by: Tom Gundersen Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/uhid.c | 3 ++- include/linux/miscdevice.h | 1 + 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hid/uhid.c b/drivers/hid/uhid.c index 5bf2fb785844..93b00d76374c 100644 --- a/drivers/hid/uhid.c +++ b/drivers/hid/uhid.c @@ -615,7 +615,7 @@ static const struct file_operations uhid_fops = { static struct miscdevice uhid_misc = { .fops = &uhid_fops, - .minor = MISC_DYNAMIC_MINOR, + .minor = UHID_MINOR, .name = UHID_NAME, }; @@ -634,4 +634,5 @@ module_exit(uhid_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("David Herrmann "); MODULE_DESCRIPTION("User-space I/O driver support for HID subsystem"); +MODULE_ALIAS_MISCDEV(UHID_MINOR); MODULE_ALIAS("devname:" UHID_NAME); diff --git a/include/linux/miscdevice.h b/include/linux/miscdevice.h index 09c2300ddb37..cb358355ef43 100644 --- a/include/linux/miscdevice.h +++ b/include/linux/miscdevice.h @@ -45,6 +45,7 @@ #define MAPPER_CTRL_MINOR 236 #define LOOP_CTRL_MINOR 237 #define VHOST_NET_MINOR 238 +#define UHID_MINOR 239 #define MISC_DYNAMIC_MINOR 255 struct device; -- cgit v1.2.3-70-g09d2 From 0158026ccced1ae312233a6a46dc0b6edce3fb6c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 27 Sep 2013 16:21:30 +0800 Subject: spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe() devm_clk_get() is used so there is no reason to explicitly call clk_put() in probe or remove functions. Signed-off-by: Wei Yongjun Signed-off-by: Mark Brown --- drivers/spi/spi-clps711x.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-clps711x.c b/drivers/spi/spi-clps711x.c index b597a92565dc..6416798828e7 100644 --- a/drivers/spi/spi-clps711x.c +++ b/drivers/spi/spi-clps711x.c @@ -226,7 +226,6 @@ static int spi_clps711x_probe(struct platform_device *pdev) dev_name(&pdev->dev), hw); if (ret) { dev_err(&pdev->dev, "Can't request IRQ\n"); - clk_put(hw->spi_clk); goto clk_out; } -- cgit v1.2.3-70-g09d2 From 5cb1327172281cadb7ee8c5fa294d7ac8e09b8db Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 16 Sep 2013 17:59:20 -0700 Subject: mtd: nand: fix memory leak in ONFI extended parameter page This fixes a memory leak in the ONFI support code for detecting the required ECC levels from this commit: commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a Author: Huang Shijie Date: Wed May 22 10:28:27 2013 +0800 mtd: get the ECC info from the Extended Parameter Page In the success case, we never freed the 'ep' buffer. Also, this fixes an oversight in the same commit where we (harmlessly) freed the NULL pointer. Signed-off-by: Brian Norris Acked-by: Huang Shijie Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7ed4841327f2..d340b2f198c6 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2869,10 +2869,8 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, len = le16_to_cpu(p->ext_param_page_length) * 16; ep = kmalloc(len, GFP_KERNEL); - if (!ep) { - ret = -ENOMEM; - goto ext_out; - } + if (!ep) + return -ENOMEM; /* Send our own NAND_CMD_PARAM. */ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1); @@ -2920,7 +2918,7 @@ static int nand_flash_detect_ext_param_page(struct mtd_info *mtd, } pr_info("ONFI extended param page detected.\n"); - return 0; + ret = 0; ext_out: kfree(ep); -- cgit v1.2.3-70-g09d2 From 2b468ef0e7959b703626b64c4d264ef822c9267a Mon Sep 17 00:00:00 2001 From: Elie De Brauwer Date: Tue, 17 Sep 2013 19:48:22 +0200 Subject: mtd: m25p80: Fix 4 byte addressing mode for Micron devices. According to the datasheet for Micron n25q256a (N25Q256A13ESF40F) 4-byte addressing mode should be entered as follows: To enter or exit the 4-byte address mode, the WRITE ENABLE command must be executed to set the write enable latch bit to 1. (Note: The WRITE ENABLE command must NOT be executed on the N25Q256A83ESF40x and N25Q256A83E1240x devices.) S# must be driven LOW. The effect of the command is immediate; after the command has been executed, the write enable latch bit is cleared to 0. Micron's portable way to perform this for all types of Micron flash is to first issue a write enable, then switch the addressing mode followed by a write disable to avoid leaving the flash in a write- able state. Signed-off-by: Elie De Brauwer [Brian: reworked a bit] Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- drivers/mtd/devices/m25p80.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 26b14f9fcac6..6bc9618af094 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -168,12 +168,25 @@ static inline int write_disable(struct m25p *flash) */ static inline int set_4byte(struct m25p *flash, u32 jedec_id, int enable) { + int status; + bool need_wren = false; + switch (JEDEC_MFR(jedec_id)) { - case CFI_MFR_MACRONIX: case CFI_MFR_ST: /* Micron, actually */ + /* Some Micron need WREN command; all will accept it */ + need_wren = true; + case CFI_MFR_MACRONIX: case 0xEF /* winbond */: + if (need_wren) + write_enable(flash); + flash->command[0] = enable ? OPCODE_EN4B : OPCODE_EX4B; - return spi_write(flash->spi, flash->command, 1); + status = spi_write(flash->spi, flash->command, 1); + + if (need_wren) + write_disable(flash); + + return status; default: /* Spansion style */ flash->command[0] = OPCODE_BRWR; -- cgit v1.2.3-70-g09d2 From 3e2bd64d243ff0f3dc08c49ff218fed42ee9d981 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Sep 2013 11:52:35 +0100 Subject: spi/s3c64xx: Ensure runtime PM is enabled prior to registration Otherwise we may try to start transfers immediately and then fail to runtime resume the device causing us not to have clocks enabled. Signed-off-by: Mark Brown Reviewed-by: Sylwester Nawrocki Conflicts: drivers/spi/spi-s3c64xx.c --- drivers/spi/spi-s3c64xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 512b8893893b..a80376dc3a10 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -1428,6 +1428,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) S3C64XX_SPI_INT_TX_OVERRUN_EN | S3C64XX_SPI_INT_TX_UNDERRUN_EN, sdd->regs + S3C64XX_SPI_INT_EN); + pm_runtime_enable(&pdev->dev); + if (spi_register_master(master)) { dev_err(&pdev->dev, "cannot register SPI master\n"); ret = -EBUSY; @@ -1440,8 +1442,6 @@ static int s3c64xx_spi_probe(struct platform_device *pdev) mem_res, sdd->rx_dma.dmach, sdd->tx_dma.dmach); - pm_runtime_enable(&pdev->dev); - return 0; err3: -- cgit v1.2.3-70-g09d2 From 550dbf47819239c7ceb27bbd9879e2feb0633aab Mon Sep 17 00:00:00 2001 From: Stefan Achatz Date: Sat, 28 Sep 2013 05:57:46 +0200 Subject: HID: roccat: Fix "cannot create duplicate filename" problems Fixing some wrong macro stringification/concatenation. Acked-by: Greg Kroah-Hartman Signed-off-by: Stefan Achatz Signed-off-by: Jiri Kosina --- drivers/hid/hid-roccat-kone.c | 2 +- drivers/hid/hid-roccat-koneplus.c | 4 ++-- drivers/hid/hid-roccat-kovaplus.c | 4 ++-- drivers/hid/hid-roccat-pyra.c | 4 ++-- 4 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-roccat-kone.c b/drivers/hid/hid-roccat-kone.c index 602c188e9d86..6101816a7ddd 100644 --- a/drivers/hid/hid-roccat-kone.c +++ b/drivers/hid/hid-roccat-kone.c @@ -382,7 +382,7 @@ static ssize_t kone_sysfs_write_profilex(struct file *fp, } #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number = { \ - .attr = { .name = "profile##number", .mode = 0660 }, \ + .attr = { .name = "profile" #number, .mode = 0660 }, \ .size = sizeof(struct kone_profile), \ .read = kone_sysfs_read_profilex, \ .write = kone_sysfs_write_profilex, \ diff --git a/drivers/hid/hid-roccat-koneplus.c b/drivers/hid/hid-roccat-koneplus.c index 5ddf605b6b89..5e99fcdc71b9 100644 --- a/drivers/hid/hid-roccat-koneplus.c +++ b/drivers/hid/hid-roccat-koneplus.c @@ -229,13 +229,13 @@ static ssize_t koneplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_SETTINGS, \ .read = koneplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KONEPLUS_SIZE_PROFILE_BUTTONS, \ .read = koneplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-kovaplus.c b/drivers/hid/hid-roccat-kovaplus.c index 515bc03136c0..0c8e1ef0b67d 100644 --- a/drivers/hid/hid-roccat-kovaplus.c +++ b/drivers/hid/hid-roccat-kovaplus.c @@ -257,13 +257,13 @@ static ssize_t kovaplus_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_SETTINGS, \ .read = kovaplus_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = KOVAPLUS_SIZE_PROFILE_BUTTONS, \ .read = kovaplus_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ diff --git a/drivers/hid/hid-roccat-pyra.c b/drivers/hid/hid-roccat-pyra.c index 5a6dbbeee790..1a07e07d99a0 100644 --- a/drivers/hid/hid-roccat-pyra.c +++ b/drivers/hid/hid-roccat-pyra.c @@ -225,13 +225,13 @@ static ssize_t pyra_sysfs_read_profilex_buttons(struct file *fp, #define PROFILE_ATTR(number) \ static struct bin_attribute bin_attr_profile##number##_settings = { \ - .attr = { .name = "profile##number##_settings", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_settings", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_SETTINGS, \ .read = pyra_sysfs_read_profilex_settings, \ .private = &profile_numbers[number-1], \ }; \ static struct bin_attribute bin_attr_profile##number##_buttons = { \ - .attr = { .name = "profile##number##_buttons", .mode = 0440 }, \ + .attr = { .name = "profile" #number "_buttons", .mode = 0440 }, \ .size = PYRA_SIZE_PROFILE_BUTTONS, \ .read = pyra_sysfs_read_profilex_buttons, \ .private = &profile_numbers[number-1], \ -- cgit v1.2.3-70-g09d2 From 8f0ba630af45235a6866054704531d49e524e49a Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Wed, 11 Sep 2013 06:49:20 +0800 Subject: s390/3270: fix return value check in tty3270_resize_work() In case of error, the function tty3270_alloc_screen() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky --- drivers/s390/char/tty3270.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c index a0f47c83fd62..3f4ca4e09a4c 100644 --- a/drivers/s390/char/tty3270.c +++ b/drivers/s390/char/tty3270.c @@ -810,7 +810,7 @@ static void tty3270_resize_work(struct work_struct *work) struct winsize ws; screen = tty3270_alloc_screen(tp->n_rows, tp->n_cols); - if (!screen) + if (IS_ERR(screen)) return; /* Switch to new output size */ spin_lock_bh(&tp->view.lock); -- cgit v1.2.3-70-g09d2 From 22bfda6688c9b91393a07887182ec35acc9d06bb Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Tue, 17 Sep 2013 13:28:50 +0200 Subject: s390/sclp: properly detect line mode console To detect a line mode console we need a message event type for the receive mask and a command event type for the send mask. Checking for a MSG event in the sclp send mask was wrong and might result in line mode consoles not being detected. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- drivers/s390/char/sclp_cmd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c index 8cd34bf644b3..77df9cb00688 100644 --- a/drivers/s390/char/sclp_cmd.c +++ b/drivers/s390/char/sclp_cmd.c @@ -145,9 +145,11 @@ bool __init sclp_has_linemode(void) if (sccb->header.response_code != 0x20) return 0; - if (sccb->sclp_send_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK)) - return 1; - return 0; + if (!(sccb->sclp_send_mask & (EVTYP_OPCMD_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + if (!(sccb->sclp_receive_mask & (EVTYP_MSG_MASK | EVTYP_PMSGCMD_MASK))) + return 0; + return 1; } bool __init sclp_has_vt220(void) -- cgit v1.2.3-70-g09d2 From 0f5a24c6602063e014ee48892ebf56093241106e Mon Sep 17 00:00:00 2001 From: Manoj Chourasia Date: Tue, 1 Oct 2013 15:39:00 +0530 Subject: HID: hidraw: close underlying device at removal of last reader Even though device exist bit is set the underlying HW device should be closed when the last reader of the device is closed i.e. open count drops to zero. Signed-off-by: Manoj Chourasia Reported-by: mika.westerberg@linux.intel.com Tested-by: mika.westerberg@linux.intel.com Signed-off-by: Jiri Kosina --- drivers/hid/hidraw.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index 8918dd12bb69..6a6dd5cd7833 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -308,18 +308,25 @@ static int hidraw_fasync(int fd, struct file *file, int on) static void drop_ref(struct hidraw *hidraw, int exists_bit) { if (exists_bit) { - hid_hw_close(hidraw->hid); hidraw->exist = 0; - if (hidraw->open) + if (hidraw->open) { + hid_hw_close(hidraw->hid); wake_up_interruptible(&hidraw->wait); + } } else { --hidraw->open; } - - if (!hidraw->open && !hidraw->exist) { - device_destroy(hidraw_class, MKDEV(hidraw_major, hidraw->minor)); - hidraw_table[hidraw->minor] = NULL; - kfree(hidraw); + if (!hidraw->open) { + if (!hidraw->exist) { + device_destroy(hidraw_class, + MKDEV(hidraw_major, hidraw->minor)); + hidraw_table[hidraw->minor] = NULL; + kfree(hidraw); + } else { + /* close device for last reader */ + hid_hw_power(hidraw->hid, PM_HINT_NORMAL); + hid_hw_close(hidraw->hid); + } } } -- cgit v1.2.3-70-g09d2 From 7da7cbbbeb60e0939fecdf9723b388136c175e5c Mon Sep 17 00:00:00 2001 From: "Anders F. U. Kiær" Date: Tue, 1 Oct 2013 19:22:05 +0200 Subject: HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGlider MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær Signed-off-by: Jiri Kosina --- drivers/hid/Kconfig | 1 + drivers/hid/hid-core.c | 1 + drivers/hid/hid-holtek-mouse.c | 4 ++++ drivers/hid/hid-ids.h | 1 + 4 files changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/hid/Kconfig b/drivers/hid/Kconfig index 71b70e3a7a71..c91d547191dd 100644 --- a/drivers/hid/Kconfig +++ b/drivers/hid/Kconfig @@ -241,6 +241,7 @@ config HID_HOLTEK - Sharkoon Drakonia / Perixx MX-2000 gaming mice - Tracer Sniper TRM-503 / NOVA Gaming Slider X200 / Zalman ZM-GM1 + - SHARKOON DarkGlider Gaming mouse config HOLTEK_FF bool "Holtek On Line Grip force feedback support" diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index b8470b1a10fe..5a8c01112a23 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1715,6 +1715,7 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { HID_USB_DEVICE(USB_VENDOR_ID_HUION, USB_DEVICE_ID_HUION_580) }, { HID_USB_DEVICE(USB_VENDOR_ID_JESS2, USB_DEVICE_ID_JESS2_COLOR_RUMBLE_PAD) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) }, diff --git a/drivers/hid/hid-holtek-mouse.c b/drivers/hid/hid-holtek-mouse.c index 7e6db3cf46f9..e696566cde46 100644 --- a/drivers/hid/hid-holtek-mouse.c +++ b/drivers/hid/hid-holtek-mouse.c @@ -27,6 +27,7 @@ * - USB ID 04d9:a067, sold as Sharkoon Drakonia and Perixx MX-2000 * - USB ID 04d9:a04a, sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 * and Zalman ZM-GM1 + * - USB ID 04d9:a081, sold as SHARKOON DarkGlider Gaming mouse */ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, @@ -46,6 +47,7 @@ static __u8 *holtek_mouse_report_fixup(struct hid_device *hdev, __u8 *rdesc, } break; case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A: + case USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081: if (*rsize >= 113 && rdesc[106] == 0xff && rdesc[107] == 0x7f && rdesc[111] == 0xff && rdesc[112] == 0x7f) { hid_info(hdev, "Fixing up report descriptor\n"); @@ -63,6 +65,8 @@ static const struct hid_device_id holtek_mouse_devices[] = { USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067) }, { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A) }, + { HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, + USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081) }, { } }; MODULE_DEVICE_TABLE(hid, holtek_mouse_devices); diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index e60e8d530697..9cbc7ab07dfa 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -450,6 +450,7 @@ #define USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD 0xa055 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A067 0xa067 #define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A04A 0xa04a +#define USB_DEVICE_ID_HOLTEK_ALT_MOUSE_A081 0xa081 #define USB_VENDOR_ID_IMATION 0x0718 #define USB_DEVICE_ID_DISC_STAKKA 0xd000 -- cgit v1.2.3-70-g09d2 From 268d76430d1b68c340687357ffd18b4b12d02269 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 3 Oct 2013 02:15:50 -0700 Subject: spi/hspi: fixup Runtime PM enable timing 3e00a09d2fbd64f0ad98e7c8c29dbf9e038fc746 (spi/hspi: Convert to core runtime PM) enabled master->auto_runtime_pm. Then, pm_runtime_enable() is required *before* spi_register_master() calling. This patch fixed it up. Kernel will hang up with "spi_master spi0: Failed to power device: -13" message without this patch. Signed-off-by: Kuninori Morimoto Signed-off-by: Mark Brown --- drivers/spi/spi-sh-hspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/spi/spi-sh-hspi.c b/drivers/spi/spi-sh-hspi.c index 0b68cb592fa4..e488a90a98b8 100644 --- a/drivers/spi/spi-sh-hspi.c +++ b/drivers/spi/spi-sh-hspi.c @@ -296,6 +296,8 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } + pm_runtime_enable(&pdev->dev); + master->num_chipselect = 1; master->bus_num = pdev->id; master->setup = hspi_setup; @@ -309,8 +311,6 @@ static int hspi_probe(struct platform_device *pdev) goto error1; } - pm_runtime_enable(&pdev->dev); - return 0; error1: -- cgit v1.2.3-70-g09d2 From 0dbc6078c06bc002bfacf95f33960b1901c663f5 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Thu, 3 Oct 2013 11:59:14 +0200 Subject: x86, build, pci: Fix PCI_MSI build on !SMP Commit ebd97be635 ('PCI: remove ARCH_SUPPORTS_MSI kconfig option') removed the ARCH_SUPPORTS_MSI option which architectures could select to indicate that they support MSI. Now, all architectures are supposed to build fine when MSI support is enabled: instead of having the architecture tell *when* MSI support can be used, it's up to the architecture code to ensure that MSI support can be enabled. On x86, commit ebd97be635 removed the following line: select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC) Which meant that MSI support was only available when the local APIC and I/O APIC were enabled. While this is always true on SMP or x86-64, it is not necessarily the case on i386 !SMP. The below patch makes sure that the local APIC and I/O APIC support is always enabled when MSI support is enabled. To do so, it: * Ensures the X86_UP_APIC option is not visible when PCI_MSI is enabled. This is the option that allows, on UP machines, to enable or not the APIC support. It is already not visible on SMP systems, or x86-64 systems, for example. We're simply also making it invisible on i386 MSI systems. * Ensures that the X86_LOCAL_APIC and X86_IO_APIC options are 'y' when PCI_MSI is enabled. Notice that this change requires a change in drivers/iommu/Kconfig to avoid a recursive Kconfig dependencey. The AMD_IOMMU option selects PCI_MSI, but was depending on X86_IO_APIC. This dependency is no longer needed: as soon as PCI_MSI is selected, the presence of X86_IO_APIC is guaranteed. Moreover, the AMD_IOMMU already depended on X86_64, which already guaranteed that X86_IO_APIC was enabled, so this dependency was anyway redundant. Signed-off-by: Thomas Petazzoni Link: http://lkml.kernel.org/r/1380794354-9079-1-git-send-email-thomas.petazzoni@free-electrons.com Reported-by: Konrad Rzeszutek Wilk Acked-by: Bjorn Helgaas Signed-off-by: H. Peter Anvin --- arch/x86/Kconfig | 6 +++--- drivers/iommu/Kconfig | 2 +- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ee2fb9d37745..145d703227bf 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -860,7 +860,7 @@ source "kernel/Kconfig.preempt" config X86_UP_APIC bool "Local APIC support on uniprocessors" - depends on X86_32 && !SMP && !X86_32_NON_STANDARD + depends on X86_32 && !SMP && !X86_32_NON_STANDARD && !PCI_MSI ---help--- A local APIC (Advanced Programmable Interrupt Controller) is an integrated interrupt controller in the CPU. If you have a single-CPU @@ -885,11 +885,11 @@ config X86_UP_IOAPIC config X86_LOCAL_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI config X86_IO_APIC def_bool y - depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC + depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_IOAPIC || PCI_MSI config X86_VISWS_APIC def_bool y diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index fe302e33f72e..c880ebaf1553 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -52,7 +52,7 @@ config AMD_IOMMU select PCI_PRI select PCI_PASID select IOMMU_API - depends on X86_64 && PCI && ACPI && X86_IO_APIC + depends on X86_64 && PCI && ACPI ---help--- With this option you can enable support for AMD IOMMU hardware in your system. An IOMMU is a hardware component which provides -- cgit v1.2.3-70-g09d2 From de8cc234a517b61c9a8450a34408dbae53aa171f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Sep 2013 17:06:26 +0530 Subject: spi: atmel: Fix incorrect error path 'irq' was not released when clk_prepare_enable failed. Fix it. Signed-off-by: Sachin Kamat Acked-by: Nicolas Ferre Signed-off-by: Mark Brown --- drivers/spi/spi-atmel.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c index fd7cc566095a..d4ac60b4a56e 100644 --- a/drivers/spi/spi-atmel.c +++ b/drivers/spi/spi-atmel.c @@ -1583,7 +1583,7 @@ static int atmel_spi_probe(struct platform_device *pdev) /* Initialize the hardware */ ret = clk_prepare_enable(clk); if (ret) - goto out_unmap_regs; + goto out_free_irq; spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ if (as->caps.has_wdrbt) { @@ -1614,6 +1614,7 @@ out_free_dma: spi_writel(as, CR, SPI_BIT(SWRST)); spi_writel(as, CR, SPI_BIT(SWRST)); /* AT91SAM9263 Rev B workaround */ clk_disable_unprepare(clk); +out_free_irq: free_irq(irq, master); out_unmap_regs: iounmap(as->regs); -- cgit v1.2.3-70-g09d2 From f50f9aabf32db7414551ffdfdccc71be5f3d6e7d Mon Sep 17 00:00:00 2001 From: David Herrmann Date: Wed, 2 Oct 2013 13:47:28 +0200 Subject: HID: wiimote: fix FF deadlock The input core has an internal spinlock that is acquired during event injection via input_event() and friends but also held during FF callbacks. That means, there is no way to share a lock between event-injection and FF handling. Unfortunately, this is what is required for wiimote state tracking and what we do with state.lock and input->lock. This deadlock can be triggered when using continuous data reporting and FF on a wiimote device at the same time. I takes me at least 30m of stress-testing to trigger it but users reported considerably shorter times (http://bpaste.net/show/132504/) when using some gaming-console emulators. The real problem is that we have two copies of internal state, one in the wiimote objects and the other in the input device. As the input-lock is not supposed to be accessed from outside of input-core, we have no other chance than offloading FF handling into a worker. This actually works pretty nice and also allows to implictly merge fast rumble changes into a single request. Due to the 3-layered workers (rumble+queue+l2cap) this might reduce FF responsiveness. Initial tests were fine so lets fix the race first and if it turns out to be too slow we can always handle FF out-of-band and skip the queue-worker. Cc: # 3.11+ Reported-by: Thomas Schneider Signed-off-by: David Herrmann Signed-off-by: Jiri Kosina --- drivers/hid/hid-wiimote-modules.c | 40 ++++++++++++++++++++++++++++----------- drivers/hid/hid-wiimote.h | 4 +++- 2 files changed, 32 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/hid/hid-wiimote-modules.c b/drivers/hid/hid-wiimote-modules.c index 2e7d644dba18..71adf9e60b13 100644 --- a/drivers/hid/hid-wiimote-modules.c +++ b/drivers/hid/hid-wiimote-modules.c @@ -119,12 +119,22 @@ static const struct wiimod_ops wiimod_keys = { * the rumble motor, this flag shouldn't be set. */ +/* used by wiimod_rumble and wiipro_rumble */ +static void wiimod_rumble_worker(struct work_struct *work) +{ + struct wiimote_data *wdata = container_of(work, struct wiimote_data, + rumble_worker); + + spin_lock_irq(&wdata->state.lock); + wiiproto_req_rumble(wdata, wdata->state.cache_rumble); + spin_unlock_irq(&wdata->state.lock); +} + static int wiimod_rumble_play(struct input_dev *dev, void *data, struct ff_effect *eff) { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -137,9 +147,10 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -147,6 +158,8 @@ static int wiimod_rumble_play(struct input_dev *dev, void *data, static int wiimod_rumble_probe(const struct wiimod_ops *ops, struct wiimote_data *wdata) { + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + set_bit(FF_RUMBLE, wdata->input->ffbit); if (input_ff_create_memless(wdata->input, NULL, wiimod_rumble_play)) return -ENOMEM; @@ -159,6 +172,8 @@ static void wiimod_rumble_remove(const struct wiimod_ops *ops, { unsigned long flags; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); @@ -1731,7 +1746,6 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, { struct wiimote_data *wdata = input_get_drvdata(dev); __u8 value; - unsigned long flags; /* * The wiimote supports only a single rumble motor so if any magnitude @@ -1744,9 +1758,10 @@ static int wiimod_pro_play(struct input_dev *dev, void *data, else value = 0; - spin_lock_irqsave(&wdata->state.lock, flags); - wiiproto_req_rumble(wdata, value); - spin_unlock_irqrestore(&wdata->state.lock, flags); + /* Locking state.lock here might deadlock with input_event() calls. + * schedule_work acts as barrier. Merging multiple changes is fine. */ + wdata->state.cache_rumble = value; + schedule_work(&wdata->rumble_worker); return 0; } @@ -1756,6 +1771,8 @@ static int wiimod_pro_probe(const struct wiimod_ops *ops, { int ret, i; + INIT_WORK(&wdata->rumble_worker, wiimod_rumble_worker); + wdata->extension.input = input_allocate_device(); if (!wdata->extension.input) return -ENOMEM; @@ -1817,12 +1834,13 @@ static void wiimod_pro_remove(const struct wiimod_ops *ops, if (!wdata->extension.input) return; + input_unregister_device(wdata->extension.input); + wdata->extension.input = NULL; + cancel_work_sync(&wdata->rumble_worker); + spin_lock_irqsave(&wdata->state.lock, flags); wiiproto_req_rumble(wdata, 0); spin_unlock_irqrestore(&wdata->state.lock, flags); - - input_unregister_device(wdata->extension.input); - wdata->extension.input = NULL; } static const struct wiimod_ops wiimod_pro = { diff --git a/drivers/hid/hid-wiimote.h b/drivers/hid/hid-wiimote.h index f1474f372c0b..75db0c400037 100644 --- a/drivers/hid/hid-wiimote.h +++ b/drivers/hid/hid-wiimote.h @@ -133,13 +133,15 @@ struct wiimote_state { __u8 *cmd_read_buf; __u8 cmd_read_size; - /* calibration data */ + /* calibration/cache data */ __u16 calib_bboard[4][3]; + __u8 cache_rumble; }; struct wiimote_data { struct hid_device *hdev; struct input_dev *input; + struct work_struct rumble_worker; struct led_classdev *leds[4]; struct input_dev *accel; struct input_dev *ir; -- cgit v1.2.3-70-g09d2 From 25f2bd7f5add608c1d1405938f39c96927b275ca Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Wed, 2 Oct 2013 19:15:03 +0200 Subject: hwmon: (applesmc) Always read until end of data The crash reported and investigated in commit 5f4513 turned out to be caused by a change to the read interface on newer (2012) SMCs. Tests by Chris show that simply reading the data valid line is enough for the problem to go away. Additional tests show that the newer SMCs no longer wait for the number of requested bytes, but start sending data right away. Apparently the number of bytes to read is no longer specified as before, but instead found out by reading until end of data. Failure to read until end of data confuses the state machine, which eventually causes the crash. As a remedy, assuming bit0 is the read valid line, make sure there is nothing more to read before leaving the read function. Tested to resolve the original problem, and runtested on MBA3,1, MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on machines before 2012. Tested-by: Chris Murphy Cc: stable@vger.kernel.org Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck --- drivers/hwmon/applesmc.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 98814d12a604..3288f13d2d87 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -230,6 +230,7 @@ static int send_argument(const char *key) static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) { + u8 status, data = 0; int i; if (send_command(cmd) || send_argument(key)) { @@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) return -EIO; } + /* This has no effect on newer (2012) SMCs */ if (send_byte(len, APPLESMC_DATA_PORT)) { pr_warn("%.4s: read len fail\n", key); return -EIO; @@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len) buffer[i] = inb(APPLESMC_DATA_PORT); } + /* Read the data port until bit0 is cleared */ + for (i = 0; i < 16; i++) { + udelay(APPLESMC_MIN_WAIT); + status = inb(APPLESMC_CMD_PORT); + if (!(status & 0x01)) + break; + data = inb(APPLESMC_DATA_PORT); + } + if (i) + pr_warn("flushed %d bytes, last value is: %d\n", i, data); + return 0; } -- cgit v1.2.3-70-g09d2 From cccdcea14fc2de8707c52e537fa2b384ccfe7ec2 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:33 +0200 Subject: i2c: i2c-designware-platdrv: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-designware-platdrv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 4c1b60539a25..0aa01136f8d9 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -270,7 +270,8 @@ static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume); MODULE_ALIAS("platform:i2c_designware"); static struct platform_driver dw_i2c_driver = { - .remove = dw_i2c_remove, + .probe = dw_i2c_probe, + .remove = dw_i2c_remove, .driver = { .name = "i2c_designware", .owner = THIS_MODULE, @@ -282,7 +283,7 @@ static struct platform_driver dw_i2c_driver = { static int __init dw_i2c_init_driver(void) { - return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); + return platform_driver_register(&dw_i2c_driver); } subsys_initcall(dw_i2c_init_driver); -- cgit v1.2.3-70-g09d2 From 3611431ce7281a6542d47bd5b2fc2206fed5749f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:34 +0200 Subject: i2c: i2c-imx: replace platform_driver_probe to support deferred probing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-König Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-imx.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index ccf46656bdad..1d7efa3169cd 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -365,7 +365,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) clk_disable_unprepare(i2c_imx->clk); } -static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, +static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, unsigned int rate) { struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div; @@ -589,7 +589,7 @@ static struct i2c_algorithm i2c_imx_algo = { .functionality = i2c_imx_func, }; -static int __init i2c_imx_probe(struct platform_device *pdev) +static int i2c_imx_probe(struct platform_device *pdev) { const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids, &pdev->dev); @@ -697,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev) return 0; /* Return OK */ } -static int __exit i2c_imx_remove(struct platform_device *pdev) +static int i2c_imx_remove(struct platform_device *pdev) { struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev); @@ -715,7 +715,8 @@ static int __exit i2c_imx_remove(struct platform_device *pdev) } static struct platform_driver i2c_imx_driver = { - .remove = __exit_p(i2c_imx_remove), + .probe = i2c_imx_probe, + .remove = i2c_imx_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, @@ -726,7 +727,7 @@ static struct platform_driver i2c_imx_driver = { static int __init i2c_adap_imx_init(void) { - return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe); + return platform_driver_register(&i2c_imx_driver); } subsys_initcall(i2c_adap_imx_init); -- cgit v1.2.3-70-g09d2 From cc40bf9a444f687a7b76450b1ad742b2ea262af4 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:35 +0200 Subject: i2c: i2c-mxs: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index f4a01675fa71..b7c857774708 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -780,12 +780,13 @@ static struct platform_driver mxs_i2c_driver = { .owner = THIS_MODULE, .of_match_table = mxs_i2c_dt_ids, }, + .probe = mxs_i2c_probe, .remove = mxs_i2c_remove, }; static int __init mxs_i2c_init(void) { - return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe); + return platform_driver_register(&mxs_i2c_driver); } subsys_initcall(mxs_i2c_init); -- cgit v1.2.3-70-g09d2 From 6d2cfb109725b748f47a242f87be9c31bf7e42c0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 8 Oct 2013 22:35:36 +0200 Subject: i2c: i2c-stu300: replace platform_driver_probe to support deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-stu300.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c index f8f6f2e552db..04a17b9b38bb 100644 --- a/drivers/i2c/busses/i2c-stu300.c +++ b/drivers/i2c/busses/i2c-stu300.c @@ -859,8 +859,7 @@ static const struct i2c_algorithm stu300_algo = { .functionality = stu300_func, }; -static int __init -stu300_probe(struct platform_device *pdev) +static int stu300_probe(struct platform_device *pdev) { struct stu300_dev *dev; struct i2c_adapter *adap; @@ -966,8 +965,7 @@ static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume); #define STU300_I2C_PM NULL #endif -static int __exit -stu300_remove(struct platform_device *pdev) +static int stu300_remove(struct platform_device *pdev) { struct stu300_dev *dev = platform_get_drvdata(pdev); @@ -989,13 +987,14 @@ static struct platform_driver stu300_i2c_driver = { .pm = STU300_I2C_PM, .of_match_table = stu300_dt_match, }, - .remove = __exit_p(stu300_remove), + .probe = stu300_probe, + .remove = stu300_remove, }; static int __init stu300_init(void) { - return platform_driver_probe(&stu300_i2c_driver, stu300_probe); + return platform_driver_register(&stu300_i2c_driver); } static void __exit stu300_exit(void) -- cgit v1.2.3-70-g09d2 From 47b6e477ed4ecacddd1f82d04d686026e08dc3db Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 10 Oct 2013 08:04:06 +0200 Subject: i2c: Not all adapters have a parent The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare Acked-by: Mika Westerberg Signed-off-by: Wolfram Sang --- drivers/i2c/i2c-core.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 29d3f045a2bf..3be58f89ac77 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -1134,6 +1134,9 @@ static void acpi_i2c_register_devices(struct i2c_adapter *adap) acpi_handle handle; acpi_status status; + if (!adap->dev.parent) + return; + handle = ACPI_HANDLE(adap->dev.parent); if (!handle) return; -- cgit v1.2.3-70-g09d2 From 4cdbf7d346e7461c3b93a26707c852e2c9db3753 Mon Sep 17 00:00:00 2001 From: Taras Kondratiuk Date: Mon, 7 Oct 2013 13:41:59 +0300 Subject: i2c: omap: Clear ARDY bit twice Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko Signed-off-by: Taras Kondratiuk Signed-off-by: Wolfram Sang Cc: stable@kernel.org --- drivers/i2c/busses/i2c-omap.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 6d8308d5dc4e..9967a6f9c2ff 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -939,6 +939,9 @@ omap_i2c_isr_thread(int this_irq, void *dev_id) /* * ProDB0017052: Clear ARDY bit twice */ + if (stat & OMAP_I2C_STAT_ARDY) + omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY); + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) { omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY | -- cgit v1.2.3-70-g09d2 From 492ed77bfadb968cca7beca348cd45b444393cd4 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Tue, 8 Oct 2013 15:51:53 +0200 Subject: i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errors of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 5d4a99ba743e..7f343bcd492e 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -66,7 +66,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, struct device_node *adapter_np, *child; struct i2c_adapter *adapter; unsigned *values, *gpios; - int i = 0; + int i = 0, ret; if (!np) return -ENODEV; @@ -116,8 +116,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, return -ENOMEM; } - for (i = 0; i < mux->data.n_gpios; i++) - gpios[i] = of_get_named_gpio(np, "mux-gpios", i); + for (i = 0; i < mux->data.n_gpios; i++) { + ret = of_get_named_gpio(np, "mux-gpios", i); + if (ret < 0) + return ret; + gpios[i] = ret; + } mux->data.gpios = gpios; -- cgit v1.2.3-70-g09d2 From 9937b8d89e1b70c08330b57afbc62c934e37c9e2 Mon Sep 17 00:00:00 2001 From: Ionut Nicu Date: Wed, 9 Oct 2013 11:50:45 +0200 Subject: i2c: i2c-mux-gpio: use deferred probing If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu Acked-by: Peter Korsgaard Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c index 7f343bcd492e..a764da777f08 100644 --- a/drivers/i2c/muxes/i2c-mux-gpio.c +++ b/drivers/i2c/muxes/i2c-mux-gpio.c @@ -79,7 +79,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(&pdev->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->data.parent = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -181,7 +181,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev) if (!parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->data.parent); - return -ENODEV; + return -EPROBE_DEFER; } mux->parent = parent; -- cgit v1.2.3-70-g09d2 From 0cd98069ad7acb2a1bdb1bb71b904c1aae0033d0 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-arb-gpio-challenge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c index 74b41ae690f3..928656e241dd 100644 --- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c +++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c @@ -200,7 +200,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev) arb->parent = of_find_i2c_adapter_by_node(parent_np); if (!arb->parent) { dev_err(dev, "Cannot find parent bus\n"); - return -EINVAL; + return -EPROBE_DEFER; } /* Actually add the mux adapter */ -- cgit v1.2.3-70-g09d2 From 2737de460e33df89461a59b247d3bfd477101785 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 10 Oct 2013 10:19:13 +0200 Subject: i2c: i2c-mux-pinctrl: use deferred probe when adapter not found If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang --- drivers/i2c/muxes/i2c-mux-pinctrl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index 69a91732ae65..68a37157377d 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -113,7 +113,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, adapter = of_find_i2c_adapter_by_node(adapter_np); if (!adapter) { dev_err(mux->dev, "Cannot find parent bus\n"); - return -ENODEV; + return -EPROBE_DEFER; } mux->pdata->parent_bus_num = i2c_adapter_id(adapter); put_device(&adapter->dev); @@ -211,7 +211,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev) if (!mux->parent) { dev_err(&pdev->dev, "Parent adapter (%d) not found\n", mux->pdata->parent_bus_num); - ret = -ENODEV; + ret = -EPROBE_DEFER; goto err; } -- cgit v1.2.3-70-g09d2 From 61875f30daf60305712e25b209ef41ced2635bad Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 21 Sep 2013 13:58:22 -0400 Subject: random: allow architectures to optionally define random_get_entropy() Allow architectures which have a disabled get_cycles() function to provide a random_get_entropy() function which provides a fine-grained, rapidly changing counter that can be used by the /dev/random driver. For example, an architecture might have a rapidly changing register used to control random TLB cache eviction, or DRAM refresh that doesn't meet the requirements of get_cycles(), but which is good enough for the needs of the random driver. Signed-off-by: "Theodore Ts'o" Cc: stable@vger.kernel.org --- drivers/char/random.c | 8 ++++---- include/linux/timex.h | 14 ++++++++++++++ 2 files changed, 18 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 92e6c67e1ae6..2d5daf9b58e9 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -643,7 +643,7 @@ struct timer_rand_state { */ void add_device_randomness(const void *buf, unsigned int size) { - unsigned long time = get_cycles() ^ jiffies; + unsigned long time = random_get_entropy() ^ jiffies; mix_pool_bytes(&input_pool, buf, size, NULL); mix_pool_bytes(&input_pool, &time, sizeof(time), NULL); @@ -680,7 +680,7 @@ static void add_timer_randomness(struct timer_rand_state *state, unsigned num) goto out; sample.jiffies = jiffies; - sample.cycles = get_cycles(); + sample.cycles = random_get_entropy(); sample.num = num; mix_pool_bytes(&input_pool, &sample, sizeof(sample), NULL); @@ -747,7 +747,7 @@ void add_interrupt_randomness(int irq, int irq_flags) struct fast_pool *fast_pool = &__get_cpu_var(irq_randomness); struct pt_regs *regs = get_irq_regs(); unsigned long now = jiffies; - __u32 input[4], cycles = get_cycles(); + __u32 input[4], cycles = random_get_entropy(); input[0] = cycles ^ jiffies; input[1] = irq; @@ -1485,7 +1485,7 @@ unsigned int get_random_int(void) hash = get_cpu_var(get_random_int_hash); - hash[0] += current->pid + jiffies + get_cycles(); + hash[0] += current->pid + jiffies + random_get_entropy(); md5_transform(hash, random_int_secret); ret = hash[0]; put_cpu_var(get_random_int_hash); diff --git a/include/linux/timex.h b/include/linux/timex.h index b3726e61368e..da4c32dbb2aa 100644 --- a/include/linux/timex.h +++ b/include/linux/timex.h @@ -64,6 +64,20 @@ #include +#ifndef random_get_entropy +/* + * The random_get_entropy() function is used by the /dev/random driver + * in order to extract entropy via the relative unpredictability of + * when an interrupt takes places versus a high speed, fine-grained + * timing source or cycle counter. Since it will be occurred on every + * single interrupt, it must have a very low cost/overhead. + * + * By default we use get_cycles() for this purpose, but individual + * architectures may override this in their asm/timex.h header file. + */ +#define random_get_entropy() get_cycles() +#endif + /* * SHIFT_PLL is used as a dampening factor to define how much we * adjust the frequency correction for a given offset in PLL mode. -- cgit v1.2.3-70-g09d2 From 0821f20d49d19f49e53b05ef6727e010c4b1f11d Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Fri, 9 Aug 2013 16:31:09 +0000 Subject: watchdog: hpwdt: Patch to ignore auxilary iLO devices This patch is to prevent hpwdt from loading on any auxilary iLO devices defined after the initial (or main) iLO device. All auxilary iLO devices will have a subsystem device ID set to 0x1979 in order for hpwdt to differentiate between the two types. Signed-off-by: Thomas Mingarelli Tested-by: Lisa Mitchell Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 5be5e3d14f79..19f3c3fc65f4 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -802,6 +802,12 @@ static int hpwdt_init_one(struct pci_dev *dev, return -ENODEV; } + /* + * Ignore all auxilary iLO devices with the following PCI ID + */ + if (dev->subsystem_device == 0x1979) + return -ENODEV; + if (pci_enable_device(dev)) { dev_warn(&dev->dev, "Not possible to enable PCI Device: 0x%x:0x%x.\n", -- cgit v1.2.3-70-g09d2 From 2fe80d3bbf1c8bd9efc5b8154207c8dd104e7306 Mon Sep 17 00:00:00 2001 From: Kent Overstreet Date: Thu, 10 Oct 2013 17:31:15 -0700 Subject: bcache: Fix a null ptr deref regression Commit c0f04d88e46d ("bcache: Fix flushes in writeback mode") was fixing a reported data corruption bug, but it seems some last minute refactoring or rebasing introduced a null pointer deref. Signed-off-by: Kent Overstreet Cc: linux-stable # >= v3.10 Reported-by: Gabriel de Perthuis Signed-off-by: Linus Torvalds --- drivers/md/bcache/request.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c index 71eb233b9ace..b6a74bcbb08f 100644 --- a/drivers/md/bcache/request.c +++ b/drivers/md/bcache/request.c @@ -996,6 +996,7 @@ static void request_write(struct cached_dev *dc, struct search *s) closure_bio_submit(bio, cl, s->d); } else { bch_writeback_add(dc); + s->op.cache_bio = bio; if (bio->bi_rw & REQ_FLUSH) { /* Also need to send a flush to the backing device */ @@ -1008,8 +1009,6 @@ static void request_write(struct cached_dev *dc, struct search *s) flush->bi_private = cl; closure_bio_submit(flush, cl, s->d); - } else { - s->op.cache_bio = bio; } } out: -- cgit v1.2.3-70-g09d2 From cdeb5c033f0389c44e5b36cafd623bdf44bbe25c Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:28:37 +0400 Subject: rcar-hpbdma: remove shdma_free_irq() calls Commit c1c63a14f4f2419d093acd7164eccdff315baa86 (DMA: shdma: switch to managed resource allocation) got rid of shdma_free_irq() but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a709ac8ff1fe1af9 (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the calls and got broken: drivers/dma/sh/rcar-hpbdma.c: In function `hpb_dmae_alloc_chan_resources': drivers/dma/sh/rcar-hpbdma.c:435: error: implicit declaration of function `shdma_free_irq' Fix this compilation error by removing the remaining shdma_free_irq() calls. Reported-by: Simon Horman Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index 45a520281ce1..b2f50d8bd755 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -432,7 +432,6 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, hpb_chan->xfer_mode = XFER_DOUBLE; } else { dev_err(hpb_chan->shdma_chan.dev, "DCR setting error"); - shdma_free_irq(&hpb_chan->shdma_chan); return -EINVAL; } @@ -614,7 +613,6 @@ static void hpb_dmae_chan_remove(struct hpb_dmae_device *hpbdev) shdma_for_each_chan(schan, &hpbdev->shdma_dev, i) { BUG_ON(!schan); - shdma_free_irq(schan); shdma_chan_remove(schan); } dma_dev->chancnt = 0; -- cgit v1.2.3-70-g09d2 From 08d08bcdee30d3a28426bd60dfbdae44b36250bc Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 26 Sep 2013 02:31:37 +0400 Subject: rcar-hpbdma: add parameter to set_slave() method Commit 4981c4dc194efb18f0e9a02f1b43e926f2f0d2bb (DMA: shdma: switch DT mode to use configuration data from a match table) added a new parameter to set_slave() method but unfortunately got merged later than commit c4f6c41ba790bbbfcebb4c47a (dma: add driver for R-Car HPB-DMAC), so that the HPB-DMAC driver retained the old prototype which caused this warning: drivers/dma/sh/rcar-hpbdma.c:485: warning: initialization from incompatible pointer type The newly added parameter is used to override DMA slave address from 'struct hpb_dmae_slave_config', so we have to add the 'slave_addr' field to 'struct hpb_dmae_chan', conditionally assign it in set_slave() method, and return in slave_addr() method. Signed-off-by: Sergei Shtylyov Tested-by: Simon Horman Signed-off-by: Vinod Koul --- drivers/dma/sh/rcar-hpbdma.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/dma/sh/rcar-hpbdma.c b/drivers/dma/sh/rcar-hpbdma.c index b2f50d8bd755..ebad84591a6e 100644 --- a/drivers/dma/sh/rcar-hpbdma.c +++ b/drivers/dma/sh/rcar-hpbdma.c @@ -93,6 +93,7 @@ struct hpb_dmae_chan { void __iomem *base; const struct hpb_dmae_slave_config *cfg; char dev_id[16]; /* unique name per DMAC of channel */ + dma_addr_t slave_addr; }; struct hpb_dmae_device { @@ -445,7 +446,8 @@ hpb_dmae_alloc_chan_resources(struct hpb_dmae_chan *hpb_chan, return 0; } -static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) +static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, + dma_addr_t slave_addr, bool try) { struct hpb_dmae_chan *chan = to_chan(schan); const struct hpb_dmae_slave_config *sc = @@ -456,6 +458,7 @@ static int hpb_dmae_set_slave(struct shdma_chan *schan, int slave_id, bool try) if (try) return 0; chan->cfg = sc; + chan->slave_addr = slave_addr ? : sc->addr; return hpb_dmae_alloc_chan_resources(chan, sc); } @@ -467,7 +470,7 @@ static dma_addr_t hpb_dmae_slave_addr(struct shdma_chan *schan) { struct hpb_dmae_chan *chan = to_chan(schan); - return chan->cfg->addr; + return chan->slave_addr; } static struct shdma_desc *hpb_dmae_embedded_desc(void *buf, int i) -- cgit v1.2.3-70-g09d2 From 2f6d8fad0a1636e675308088c35e863d066e0949 Mon Sep 17 00:00:00 2001 From: "Geyslan G. Bem" Date: Mon, 7 Oct 2013 19:19:58 -0300 Subject: dma: edma.c: remove edma_desc leakage Free memory allocated to edma_desc when failing to allocate slot. Signed-off-by: Geyslan G. Bem Signed-off-by: Vinod Koul --- drivers/dma/edma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 098a8da450f0..3519111c566b 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -306,6 +306,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg( EDMA_SLOT_ANY); if (echan->slot[i] < 0) { dev_err(dev, "Failed to allocate slot\n"); + kfree(edesc); return NULL; } } -- cgit v1.2.3-70-g09d2 From 8612ed0d97abcf1c016d34755b7cf2060de71963 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 23 Aug 2013 11:40:59 +0300 Subject: watchdog: ts72xx_wdt: locking bug in ioctl Calling the WDIOC_GETSTATUS & WDIOC_GETBOOTSTATUS and twice will cause a interruptible deadlock. Signed-off-by: Dan Carpenter Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/ts72xx_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/ts72xx_wdt.c b/drivers/watchdog/ts72xx_wdt.c index 42913f131dc2..c9b0c627fe7e 100644 --- a/drivers/watchdog/ts72xx_wdt.c +++ b/drivers/watchdog/ts72xx_wdt.c @@ -310,7 +310,8 @@ static long ts72xx_wdt_ioctl(struct file *file, unsigned int cmd, case WDIOC_GETSTATUS: case WDIOC_GETBOOTSTATUS: - return put_user(0, p); + error = put_user(0, p); + break; case WDIOC_KEEPALIVE: ts72xx_wdt_kick(wdt); -- cgit v1.2.3-70-g09d2 From 4c4e45669de475573b15d968a6dca8d00124c9ad Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 23 Sep 2013 19:16:57 +0900 Subject: watchdog: kempld_wdt: Fix bit mask definition STAGE_CFG bits are defined as [5:4] bits. However, '(((x) & 0x30) << 4)' handles [9:8] bits. Thus, it should be fixed in order to handle [5:4] bits. Signed-off-by: Jingoo Han Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/kempld_wdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/watchdog/kempld_wdt.c b/drivers/watchdog/kempld_wdt.c index 491419e0772a..5c3d4df63e68 100644 --- a/drivers/watchdog/kempld_wdt.c +++ b/drivers/watchdog/kempld_wdt.c @@ -35,7 +35,7 @@ #define KEMPLD_WDT_STAGE_TIMEOUT(x) (0x1b + (x) * 4) #define KEMPLD_WDT_STAGE_CFG(x) (0x18 + (x)) #define STAGE_CFG_GET_PRESCALER(x) (((x) & 0x30) >> 4) -#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x30) << 4) +#define STAGE_CFG_SET_PRESCALER(x) (((x) & 0x3) << 4) #define STAGE_CFG_PRESCALER_MASK 0x30 #define STAGE_CFG_ACTION_MASK 0x7 #define STAGE_CFG_ASSERT (1 << 3) -- cgit v1.2.3-70-g09d2 From 1d5898b4f8a0f6e231546d30dd54f6f9b89c232c Mon Sep 17 00:00:00 2001 From: Maxime Ripard Date: Sat, 5 Oct 2013 16:20:17 +0200 Subject: watchdog: sunxi: Fix section mismatch This driver has a section mismatch, for probe and remove functions, leading to the following warning during the compilation. WARNING: drivers/watchdog/built-in.o(.data+0x24): Section mismatch in reference from the variable sunxi_wdt_driver to the function .init.text:sunxi_wdt_probe() The variable sunxi_wdt_driver references the function __init sunxi_wdt_probe() Signed-off-by: Maxime Ripard Reviewed-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/sunxi_wdt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/watchdog/sunxi_wdt.c b/drivers/watchdog/sunxi_wdt.c index 1f94b42764aa..f6caa77151c7 100644 --- a/drivers/watchdog/sunxi_wdt.c +++ b/drivers/watchdog/sunxi_wdt.c @@ -146,7 +146,7 @@ static const struct watchdog_ops sunxi_wdt_ops = { .set_timeout = sunxi_wdt_set_timeout, }; -static int __init sunxi_wdt_probe(struct platform_device *pdev) +static int sunxi_wdt_probe(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt; struct resource *res; @@ -187,7 +187,7 @@ static int __init sunxi_wdt_probe(struct platform_device *pdev) return 0; } -static int __exit sunxi_wdt_remove(struct platform_device *pdev) +static int sunxi_wdt_remove(struct platform_device *pdev) { struct sunxi_wdt_dev *sunxi_wdt = platform_get_drvdata(pdev); -- cgit v1.2.3-70-g09d2 From cd66407810869709e0d6764409137d48c6812cfc Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Wed, 2 Oct 2013 10:34:19 -0700 Subject: drm/i915: disable LVDS clock gating on CPT v2 Needed to prevent display corruption in high res panels. v2: use correct unit names (Rodrigo) Signed-off-by: Jesse Barnes Tested-by: Ulrich Drepper Reviewed-by: Rodrigo Vivi Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_reg.h | 2 ++ drivers/gpu/drm/i915/intel_pm.c | 4 +++- 2 files changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 38f96f65d87a..fd721ea8728e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -4279,7 +4279,9 @@ #define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN) #define SOUTH_DSPCLK_GATE_D 0xc2020 +#define PCH_DPLUNIT_CLOCK_GATE_DISABLE (1<<30) #define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29) +#define PCH_CPUNIT_CLOCK_GATE_DISABLE (1<<14) #define PCH_LP_PARTITION_LEVEL_DISABLE (1<<12) /* CPU: FDI_TX */ diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index f4c5e95b2d6f..26c2ea3e985c 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -4759,7 +4759,9 @@ static void cpt_init_clock_gating(struct drm_device *dev) * gating for the panel power sequencer or it will fail to * start up when no ports are active. */ - I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE); + I915_WRITE(SOUTH_DSPCLK_GATE_D, PCH_DPLSUNIT_CLOCK_GATE_DISABLE | + PCH_DPLUNIT_CLOCK_GATE_DISABLE | + PCH_CPUNIT_CLOCK_GATE_DISABLE); I915_WRITE(SOUTH_CHICKEN2, I915_READ(SOUTH_CHICKEN2) | DPLS_EDP_PPS_FIX_DIS); /* The below fixes the weird display corruption, a few pixels shifted -- cgit v1.2.3-70-g09d2 From b35b380ed46bb01726bec1795e6443e625306757 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 16 Oct 2013 09:18:21 -0700 Subject: drm/i915: Make PTE valid encoding optional We need this to work around a corruption when the boot kernel image loads the hibernated kernel image from swap on Haswell systems - somehow not everything is properly shut off. This is just the prep work, the next patch will implement the actual workaround. Signed-off-by: Ben Widawsky [danvet: Add a commit message suitable for -fixes and add cc: stable] Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.h | 3 ++- drivers/gpu/drm/i915/i915_gem_gtt.c | 35 ++++++++++++++++++++--------------- 2 files changed, 22 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 35874b3a86dc..3979a81dd6ee 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -497,7 +497,8 @@ struct i915_address_space { /* FIXME: Need a more generic return type */ gen6_gtt_pte_t (*pte_encode)(dma_addr_t addr, - enum i915_cache_level level); + enum i915_cache_level level, + bool valid); /* Create a valid PTE */ void (*clear_range)(struct i915_address_space *vm, unsigned int first_entry, unsigned int num_entries); diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 212f6d8c35ec..32aa69d7ef20 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -58,9 +58,10 @@ #define HSW_WT_ELLC_LLC_AGE0 HSW_CACHEABILITY_CONTROL(0x6) static gen6_gtt_pte_t snb_pte_encode(dma_addr_t addr, - enum i915_cache_level level) + enum i915_cache_level level, + bool valid) { - gen6_gtt_pte_t pte = GEN6_PTE_VALID; + gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0; pte |= GEN6_PTE_ADDR_ENCODE(addr); switch (level) { @@ -79,9 +80,10 @@ static gen6_gtt_pte_t snb_pte_encode(dma_addr_t addr, } static gen6_gtt_pte_t ivb_pte_encode(dma_addr_t addr, - enum i915_cache_level level) + enum i915_cache_level level, + bool valid) { - gen6_gtt_pte_t pte = GEN6_PTE_VALID; + gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0; pte |= GEN6_PTE_ADDR_ENCODE(addr); switch (level) { @@ -105,9 +107,10 @@ static gen6_gtt_pte_t ivb_pte_encode(dma_addr_t addr, #define BYT_PTE_SNOOPED_BY_CPU_CACHES (1 << 2) static gen6_gtt_pte_t byt_pte_encode(dma_addr_t addr, - enum i915_cache_level level) + enum i915_cache_level level, + bool valid) { - gen6_gtt_pte_t pte = GEN6_PTE_VALID; + gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0; pte |= GEN6_PTE_ADDR_ENCODE(addr); /* Mark the page as writeable. Other platforms don't have a @@ -122,9 +125,10 @@ static gen6_gtt_pte_t byt_pte_encode(dma_addr_t addr, } static gen6_gtt_pte_t hsw_pte_encode(dma_addr_t addr, - enum i915_cache_level level) + enum i915_cache_level level, + bool valid) { - gen6_gtt_pte_t pte = GEN6_PTE_VALID; + gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0; pte |= HSW_PTE_ADDR_ENCODE(addr); if (level != I915_CACHE_NONE) @@ -134,9 +138,10 @@ static gen6_gtt_pte_t hsw_pte_encode(dma_addr_t addr, } static gen6_gtt_pte_t iris_pte_encode(dma_addr_t addr, - enum i915_cache_level level) + enum i915_cache_level level, + bool valid) { - gen6_gtt_pte_t pte = GEN6_PTE_VALID; + gen6_gtt_pte_t pte = valid ? GEN6_PTE_VALID : 0; pte |= HSW_PTE_ADDR_ENCODE(addr); switch (level) { @@ -245,7 +250,7 @@ static void gen6_ppgtt_clear_range(struct i915_address_space *vm, unsigned first_pte = first_entry % I915_PPGTT_PT_ENTRIES; unsigned last_pte, i; - scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC); + scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, true); while (num_entries) { last_pte = first_pte + num_entries; @@ -282,7 +287,7 @@ static void gen6_ppgtt_insert_entries(struct i915_address_space *vm, dma_addr_t page_addr; page_addr = sg_page_iter_dma_address(&sg_iter); - pt_vaddr[act_pte] = vm->pte_encode(page_addr, cache_level); + pt_vaddr[act_pte] = vm->pte_encode(page_addr, cache_level, true); if (++act_pte == I915_PPGTT_PT_ENTRIES) { kunmap_atomic(pt_vaddr); act_pt++; @@ -536,7 +541,7 @@ static void gen6_ggtt_insert_entries(struct i915_address_space *vm, for_each_sg_page(st->sgl, &sg_iter, st->nents, 0) { addr = sg_page_iter_dma_address(&sg_iter); - iowrite32(vm->pte_encode(addr, level), >t_entries[i]); + iowrite32(vm->pte_encode(addr, level, true), >t_entries[i]); i++; } @@ -548,7 +553,7 @@ static void gen6_ggtt_insert_entries(struct i915_address_space *vm, */ if (i != 0) WARN_ON(readl(>t_entries[i-1]) != - vm->pte_encode(addr, level)); + vm->pte_encode(addr, level, true)); /* This next bit makes the above posting read even more important. We * want to flush the TLBs only after we're certain all the PTE updates @@ -573,7 +578,7 @@ static void gen6_ggtt_clear_range(struct i915_address_space *vm, first_entry, num_entries, max_entries)) num_entries = max_entries; - scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC); + scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, true); for (i = 0; i < num_entries; i++) iowrite32(scratch_pte, >t_base[i]); readl(gtt_base); -- cgit v1.2.3-70-g09d2 From 828c79087cec61eaf4c76bb32c222fbe35ac3930 Mon Sep 17 00:00:00 2001 From: Ben Widawsky Date: Wed, 16 Oct 2013 09:21:30 -0700 Subject: drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai Tested-by: Paulo Zanoni Signed-off-by: Ben Widawsky Tested-By: Todd Previte Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 5 ++- drivers/gpu/drm/i915/i915_drv.h | 5 ++- drivers/gpu/drm/i915/i915_gem_gtt.c | 76 ++++++++++++++++++++++++++++++++----- drivers/gpu/drm/i915/i915_reg.h | 4 ++ 4 files changed, 78 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 69d8ed5416c3..2ad27880cd04 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -505,6 +505,8 @@ static int i915_drm_freeze(struct drm_device *dev) intel_modeset_suspend_hw(dev); } + i915_gem_suspend_gtt_mappings(dev); + i915_save_state(dev); intel_opregion_fini(dev); @@ -648,7 +650,8 @@ static int i915_drm_thaw(struct drm_device *dev) mutex_lock(&dev->struct_mutex); i915_gem_restore_gtt_mappings(dev); mutex_unlock(&dev->struct_mutex); - } + } else if (drm_core_check_feature(dev, DRIVER_MODESET)) + i915_check_and_clear_faults(dev); __i915_drm_thaw(dev); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 3979a81dd6ee..ab0f2c0a440c 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -501,7 +501,8 @@ struct i915_address_space { bool valid); /* Create a valid PTE */ void (*clear_range)(struct i915_address_space *vm, unsigned int first_entry, - unsigned int num_entries); + unsigned int num_entries, + bool use_scratch); void (*insert_entries)(struct i915_address_space *vm, struct sg_table *st, unsigned int first_entry, @@ -2066,6 +2067,8 @@ void i915_ppgtt_bind_object(struct i915_hw_ppgtt *ppgtt, void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt, struct drm_i915_gem_object *obj); +void i915_check_and_clear_faults(struct drm_device *dev); +void i915_gem_suspend_gtt_mappings(struct drm_device *dev); void i915_gem_restore_gtt_mappings(struct drm_device *dev); int __must_check i915_gem_gtt_prepare_object(struct drm_i915_gem_object *obj); void i915_gem_gtt_bind_object(struct drm_i915_gem_object *obj, diff --git a/drivers/gpu/drm/i915/i915_gem_gtt.c b/drivers/gpu/drm/i915/i915_gem_gtt.c index 32aa69d7ef20..1f7b4caefb6e 100644 --- a/drivers/gpu/drm/i915/i915_gem_gtt.c +++ b/drivers/gpu/drm/i915/i915_gem_gtt.c @@ -241,7 +241,8 @@ static int gen6_ppgtt_enable(struct drm_device *dev) /* PPGTT support for Sandybdrige/Gen6 and later */ static void gen6_ppgtt_clear_range(struct i915_address_space *vm, unsigned first_entry, - unsigned num_entries) + unsigned num_entries, + bool use_scratch) { struct i915_hw_ppgtt *ppgtt = container_of(vm, struct i915_hw_ppgtt, base); @@ -372,7 +373,7 @@ static int gen6_ppgtt_init(struct i915_hw_ppgtt *ppgtt) } ppgtt->base.clear_range(&ppgtt->base, 0, - ppgtt->num_pd_entries * I915_PPGTT_PT_ENTRIES); + ppgtt->num_pd_entries * I915_PPGTT_PT_ENTRIES, true); ppgtt->pd_offset = first_pd_entry_in_global_pt * sizeof(gen6_gtt_pte_t); @@ -449,7 +450,8 @@ void i915_ppgtt_unbind_object(struct i915_hw_ppgtt *ppgtt, { ppgtt->base.clear_range(&ppgtt->base, i915_gem_obj_ggtt_offset(obj) >> PAGE_SHIFT, - obj->base.size >> PAGE_SHIFT); + obj->base.size >> PAGE_SHIFT, + true); } extern int intel_iommu_gfx_mapped; @@ -490,15 +492,65 @@ static void undo_idling(struct drm_i915_private *dev_priv, bool interruptible) dev_priv->mm.interruptible = interruptible; } +void i915_check_and_clear_faults(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_ring_buffer *ring; + int i; + + if (INTEL_INFO(dev)->gen < 6) + return; + + for_each_ring(ring, dev_priv, i) { + u32 fault_reg; + fault_reg = I915_READ(RING_FAULT_REG(ring)); + if (fault_reg & RING_FAULT_VALID) { + DRM_DEBUG_DRIVER("Unexpected fault\n" + "\tAddr: 0x%08lx\\n" + "\tAddress space: %s\n" + "\tSource ID: %d\n" + "\tType: %d\n", + fault_reg & PAGE_MASK, + fault_reg & RING_FAULT_GTTSEL_MASK ? "GGTT" : "PPGTT", + RING_FAULT_SRCID(fault_reg), + RING_FAULT_FAULT_TYPE(fault_reg)); + I915_WRITE(RING_FAULT_REG(ring), + fault_reg & ~RING_FAULT_VALID); + } + } + POSTING_READ(RING_FAULT_REG(&dev_priv->ring[RCS])); +} + +void i915_gem_suspend_gtt_mappings(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Don't bother messing with faults pre GEN6 as we have little + * documentation supporting that it's a good idea. + */ + if (INTEL_INFO(dev)->gen < 6) + return; + + i915_check_and_clear_faults(dev); + + dev_priv->gtt.base.clear_range(&dev_priv->gtt.base, + dev_priv->gtt.base.start / PAGE_SIZE, + dev_priv->gtt.base.total / PAGE_SIZE, + false); +} + void i915_gem_restore_gtt_mappings(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; struct drm_i915_gem_object *obj; + i915_check_and_clear_faults(dev); + /* First fill our portion of the GTT with scratch pages */ dev_priv->gtt.base.clear_range(&dev_priv->gtt.base, dev_priv->gtt.base.start / PAGE_SIZE, - dev_priv->gtt.base.total / PAGE_SIZE); + dev_priv->gtt.base.total / PAGE_SIZE, + true); list_for_each_entry(obj, &dev_priv->mm.bound_list, global_list) { i915_gem_clflush_object(obj, obj->pin_display); @@ -565,7 +617,8 @@ static void gen6_ggtt_insert_entries(struct i915_address_space *vm, static void gen6_ggtt_clear_range(struct i915_address_space *vm, unsigned int first_entry, - unsigned int num_entries) + unsigned int num_entries, + bool use_scratch) { struct drm_i915_private *dev_priv = vm->dev->dev_private; gen6_gtt_pte_t scratch_pte, __iomem *gtt_base = @@ -578,7 +631,8 @@ static void gen6_ggtt_clear_range(struct i915_address_space *vm, first_entry, num_entries, max_entries)) num_entries = max_entries; - scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, true); + scratch_pte = vm->pte_encode(vm->scratch.addr, I915_CACHE_LLC, use_scratch); + for (i = 0; i < num_entries; i++) iowrite32(scratch_pte, >t_base[i]); readl(gtt_base); @@ -599,7 +653,8 @@ static void i915_ggtt_insert_entries(struct i915_address_space *vm, static void i915_ggtt_clear_range(struct i915_address_space *vm, unsigned int first_entry, - unsigned int num_entries) + unsigned int num_entries, + bool unused) { intel_gtt_clear_range(first_entry, num_entries); } @@ -627,7 +682,8 @@ void i915_gem_gtt_unbind_object(struct drm_i915_gem_object *obj) dev_priv->gtt.base.clear_range(&dev_priv->gtt.base, entry, - obj->base.size >> PAGE_SHIFT); + obj->base.size >> PAGE_SHIFT, + true); obj->has_global_gtt_mapping = 0; } @@ -714,11 +770,11 @@ void i915_gem_setup_global_gtt(struct drm_device *dev, const unsigned long count = (hole_end - hole_start) / PAGE_SIZE; DRM_DEBUG_KMS("clearing unused GTT space: [%lx, %lx]\n", hole_start, hole_end); - ggtt_vm->clear_range(ggtt_vm, hole_start / PAGE_SIZE, count); + ggtt_vm->clear_range(ggtt_vm, hole_start / PAGE_SIZE, count, true); } /* And finally clear the reserved guard page */ - ggtt_vm->clear_range(ggtt_vm, end / PAGE_SIZE - 1, 1); + ggtt_vm->clear_range(ggtt_vm, end / PAGE_SIZE - 1, 1, true); } static bool diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index fd721ea8728e..ef9b35479f01 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -604,6 +604,10 @@ #define ARB_MODE_SWIZZLE_IVB (1<<5) #define RENDER_HWS_PGA_GEN7 (0x04080) #define RING_FAULT_REG(ring) (0x4094 + 0x100*(ring)->id) +#define RING_FAULT_GTTSEL_MASK (1<<11) +#define RING_FAULT_SRCID(x) ((x >> 3) & 0xff) +#define RING_FAULT_FAULT_TYPE(x) ((x >> 1) & 0x3) +#define RING_FAULT_VALID (1<<0) #define DONE_REG 0x40b0 #define BSD_HWS_PGA_GEN7 (0x04180) #define BLT_HWS_PGA_GEN7 (0x04280) -- cgit v1.2.3-70-g09d2