From d6423d2ec39cce2bfca418c81ef51792891576bc Mon Sep 17 00:00:00 2001 From: Yuiko Oshino Date: Fri, 22 Oct 2021 11:13:53 -0400 Subject: net: ethernet: microchip: lan743x: Fix driver crash when lan743x_pm_resume fails The driver needs to clean up and return when the initialization fails on resume. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/lan743x_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index 9e8561cdc32a..3ac968b1c6ce 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -3019,6 +3019,8 @@ static int lan743x_pm_resume(struct device *dev) if (ret) { netif_err(adapter, probe, adapter->netdev, "lan743x_hardware_init returned %d\n", ret); + lan743x_pci_cleanup(adapter); + return ret; } /* open netdev when netdev is at running state while resume. -- cgit v1.2.3-70-g09d2 From 95a359c9553342d36d408d35331ff0bfce75272f Mon Sep 17 00:00:00 2001 From: Yuiko Oshino Date: Fri, 22 Oct 2021 11:53:43 -0400 Subject: net: ethernet: microchip: lan743x: Fix dma allocation failure by using dma_set_mask_and_coherent The dma failure was reported in the raspberry pi github (issue #4117). https://github.com/raspberrypi/linux/issues/4117 The use of dma_set_mask_and_coherent fixes the issue. Tested on 32/64-bit raspberry pi CM4 and 64-bit ubuntu x86 PC with EVB-LAN7430. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/lan743x_main.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index 3ac968b1c6ce..c4f32c7e0db1 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -1743,6 +1743,16 @@ static int lan743x_tx_ring_init(struct lan743x_tx *tx) ret = -EINVAL; goto cleanup; } + if (dma_set_mask_and_coherent(&tx->adapter->pdev->dev, + DMA_BIT_MASK(64))) { + if (dma_set_mask_and_coherent(&tx->adapter->pdev->dev, + DMA_BIT_MASK(32))) { + dev_warn(&tx->adapter->pdev->dev, + "lan743x_: No suitable DMA available\n"); + ret = -ENOMEM; + goto cleanup; + } + } ring_allocation_size = ALIGN(tx->ring_size * sizeof(struct lan743x_tx_descriptor), PAGE_SIZE); @@ -2276,6 +2286,16 @@ static int lan743x_rx_ring_init(struct lan743x_rx *rx) ret = -EINVAL; goto cleanup; } + if (dma_set_mask_and_coherent(&rx->adapter->pdev->dev, + DMA_BIT_MASK(64))) { + if (dma_set_mask_and_coherent(&rx->adapter->pdev->dev, + DMA_BIT_MASK(32))) { + dev_warn(&rx->adapter->pdev->dev, + "lan743x_: No suitable DMA available\n"); + ret = -ENOMEM; + goto cleanup; + } + } ring_allocation_size = ALIGN(rx->ring_size * sizeof(struct lan743x_rx_descriptor), PAGE_SIZE); -- cgit v1.2.3-70-g09d2 From c10a485c3de5ccbf1fff65a382cebcb2730c6b06 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 24 Oct 2021 21:48:02 +0200 Subject: phy: phy_ethtool_ksettings_get: Lock the phy for consistency The PHY structure should be locked while copying information out if it, otherwise there is no guarantee of self consistency. Without the lock the PHY state machine could be updating the structure. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index f124a8a58bd4..8457b829667e 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -299,6 +299,7 @@ EXPORT_SYMBOL(phy_ethtool_ksettings_set); void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd) { + mutex_lock(&phydev->lock); linkmode_copy(cmd->link_modes.supported, phydev->supported); linkmode_copy(cmd->link_modes.advertising, phydev->advertising); linkmode_copy(cmd->link_modes.lp_advertising, phydev->lp_advertising); @@ -317,6 +318,7 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev, cmd->base.autoneg = phydev->autoneg; cmd->base.eth_tp_mdix_ctrl = phydev->mdix_ctrl; cmd->base.eth_tp_mdix = phydev->mdix; + mutex_unlock(&phydev->lock); } EXPORT_SYMBOL(phy_ethtool_ksettings_get); -- cgit v1.2.3-70-g09d2 From 64cd92d5e8180c2ded3fdea76862de6f596ae2c9 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 24 Oct 2021 21:48:03 +0200 Subject: phy: phy_ethtool_ksettings_set: Move after phy_start_aneg This allows it to make use of a helper which assume the PHY is already locked. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 106 +++++++++++++++++++++++++------------------------- 1 file changed, 53 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 8457b829667e..ee584fa8b76d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -243,59 +243,6 @@ static void phy_sanitize_settings(struct phy_device *phydev) } } -int phy_ethtool_ksettings_set(struct phy_device *phydev, - const struct ethtool_link_ksettings *cmd) -{ - __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); - u8 autoneg = cmd->base.autoneg; - u8 duplex = cmd->base.duplex; - u32 speed = cmd->base.speed; - - if (cmd->base.phy_address != phydev->mdio.addr) - return -EINVAL; - - linkmode_copy(advertising, cmd->link_modes.advertising); - - /* We make sure that we don't pass unsupported values in to the PHY */ - linkmode_and(advertising, advertising, phydev->supported); - - /* Verify the settings we care about. */ - if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE) - return -EINVAL; - - if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising)) - return -EINVAL; - - if (autoneg == AUTONEG_DISABLE && - ((speed != SPEED_1000 && - speed != SPEED_100 && - speed != SPEED_10) || - (duplex != DUPLEX_HALF && - duplex != DUPLEX_FULL))) - return -EINVAL; - - phydev->autoneg = autoneg; - - if (autoneg == AUTONEG_DISABLE) { - phydev->speed = speed; - phydev->duplex = duplex; - } - - linkmode_copy(phydev->advertising, advertising); - - linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, - phydev->advertising, autoneg == AUTONEG_ENABLE); - - phydev->master_slave_set = cmd->base.master_slave_cfg; - phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; - - /* Restart the PHY */ - phy_start_aneg(phydev); - - return 0; -} -EXPORT_SYMBOL(phy_ethtool_ksettings_set); - void phy_ethtool_ksettings_get(struct phy_device *phydev, struct ethtool_link_ksettings *cmd) { @@ -802,6 +749,59 @@ static int phy_poll_aneg_done(struct phy_device *phydev) return ret < 0 ? ret : 0; } +int phy_ethtool_ksettings_set(struct phy_device *phydev, + const struct ethtool_link_ksettings *cmd) +{ + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); + u8 autoneg = cmd->base.autoneg; + u8 duplex = cmd->base.duplex; + u32 speed = cmd->base.speed; + + if (cmd->base.phy_address != phydev->mdio.addr) + return -EINVAL; + + linkmode_copy(advertising, cmd->link_modes.advertising); + + /* We make sure that we don't pass unsupported values in to the PHY */ + linkmode_and(advertising, advertising, phydev->supported); + + /* Verify the settings we care about. */ + if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE) + return -EINVAL; + + if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising)) + return -EINVAL; + + if (autoneg == AUTONEG_DISABLE && + ((speed != SPEED_1000 && + speed != SPEED_100 && + speed != SPEED_10) || + (duplex != DUPLEX_HALF && + duplex != DUPLEX_FULL))) + return -EINVAL; + + phydev->autoneg = autoneg; + + if (autoneg == AUTONEG_DISABLE) { + phydev->speed = speed; + phydev->duplex = duplex; + } + + linkmode_copy(phydev->advertising, advertising); + + linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, + phydev->advertising, autoneg == AUTONEG_ENABLE); + + phydev->master_slave_set = cmd->base.master_slave_cfg; + phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; + + /* Restart the PHY */ + phy_start_aneg(phydev); + + return 0; +} +EXPORT_SYMBOL(phy_ethtool_ksettings_set); + /** * phy_speed_down - set speed to lowest speed supported by both link partners * @phydev: the phy_device struct -- cgit v1.2.3-70-g09d2 From 707293a56f95f8e7e0cfae008010c7933fb68973 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 24 Oct 2021 21:48:04 +0200 Subject: phy: phy_start_aneg: Add an unlocked version Split phy_start_aneg into a wrapper which takes the PHY lock, and a helper doing the real work. This will be needed when phy_ethtook_ksettings_set takes the lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 30 ++++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ee584fa8b76d..d845afab1af7 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -700,7 +700,7 @@ static int phy_check_link_status(struct phy_device *phydev) } /** - * phy_start_aneg - start auto-negotiation for this PHY device + * _phy_start_aneg - start auto-negotiation for this PHY device * @phydev: the phy_device struct * * Description: Sanitizes the settings (if we're not autonegotiating @@ -708,25 +708,43 @@ static int phy_check_link_status(struct phy_device *phydev) * If the PHYCONTROL Layer is operating, we change the state to * reflect the beginning of Auto-negotiation or forcing. */ -int phy_start_aneg(struct phy_device *phydev) +static int _phy_start_aneg(struct phy_device *phydev) { int err; + lockdep_assert_held(&phydev->lock); + if (!phydev->drv) return -EIO; - mutex_lock(&phydev->lock); - if (AUTONEG_DISABLE == phydev->autoneg) phy_sanitize_settings(phydev); err = phy_config_aneg(phydev); if (err < 0) - goto out_unlock; + return err; if (phy_is_started(phydev)) err = phy_check_link_status(phydev); -out_unlock: + + return err; +} + +/** + * phy_start_aneg - start auto-negotiation for this PHY device + * @phydev: the phy_device struct + * + * Description: Sanitizes the settings (if we're not autonegotiating + * them), and then calls the driver's config_aneg function. + * If the PHYCONTROL Layer is operating, we change the state to + * reflect the beginning of Auto-negotiation or forcing. + */ +int phy_start_aneg(struct phy_device *phydev) +{ + int err; + + mutex_lock(&phydev->lock); + err = _phy_start_aneg(phydev); mutex_unlock(&phydev->lock); return err; -- cgit v1.2.3-70-g09d2 From af1a02aa23c37045e6adfcf074cf7dbac167a403 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sun, 24 Oct 2021 21:48:05 +0200 Subject: phy: phy_ethtool_ksettings_set: Lock the PHY while changing settings There is a race condition where the PHY state machine can change members of the phydev structure at the same time userspace requests a change via ethtool. To prevent this, have phy_ethtool_ksettings_set take the PHY lock. Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support") Reported-by: Walter Stoll Suggested-by: Walter Stoll Tested-by: Walter Stoll Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/phy/phy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index d845afab1af7..a3bfb156c83d 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -798,6 +798,7 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, duplex != DUPLEX_FULL))) return -EINVAL; + mutex_lock(&phydev->lock); phydev->autoneg = autoneg; if (autoneg == AUTONEG_DISABLE) { @@ -814,8 +815,9 @@ int phy_ethtool_ksettings_set(struct phy_device *phydev, phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl; /* Restart the PHY */ - phy_start_aneg(phydev); + _phy_start_aneg(phydev); + mutex_unlock(&phydev->lock); return 0; } EXPORT_SYMBOL(phy_ethtool_ksettings_set); -- cgit v1.2.3-70-g09d2 From ace19b992436a257d9a793672e57abc28fe83e2e Mon Sep 17 00:00:00 2001 From: Trevor Woerner Date: Sun, 24 Oct 2021 13:50:02 -0400 Subject: net: nxp: lpc_eth.c: avoid hang when bringing interface down A hard hang is observed whenever the ethernet interface is brought down. If the PHY is stopped before the LPC core block is reset, the SoC will hang. Comparing lpc_eth_close() and lpc_eth_open() I re-arranged the ordering of the functions calls in lpc_eth_close() to reset the hardware before stopping the PHY. Fixes: b7370112f519 ("lpc32xx: Added ethernet driver") Signed-off-by: Trevor Woerner Acked-by: Vladimir Zapolskiy Signed-off-by: David S. Miller --- drivers/net/ethernet/nxp/lpc_eth.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/nxp/lpc_eth.c b/drivers/net/ethernet/nxp/lpc_eth.c index d29fe562b3de..c910fa2f40a4 100644 --- a/drivers/net/ethernet/nxp/lpc_eth.c +++ b/drivers/net/ethernet/nxp/lpc_eth.c @@ -1015,9 +1015,6 @@ static int lpc_eth_close(struct net_device *ndev) napi_disable(&pldat->napi); netif_stop_queue(ndev); - if (ndev->phydev) - phy_stop(ndev->phydev); - spin_lock_irqsave(&pldat->lock, flags); __lpc_eth_reset(pldat); netif_carrier_off(ndev); @@ -1025,6 +1022,8 @@ static int lpc_eth_close(struct net_device *ndev) writel(0, LPC_ENET_MAC2(pldat->net_base)); spin_unlock_irqrestore(&pldat->lock, flags); + if (ndev->phydev) + phy_stop(ndev->phydev); clk_disable_unprepare(pldat->clk); return 0; -- cgit v1.2.3-70-g09d2 From 042b2046d0f05cf8124c26ff65dbb6148a4404fb Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Fri, 22 Oct 2021 16:31:39 -0700 Subject: xen/netfront: stop tx queues during live migration The tx queues are not stopped during the live migration. As a result, the ndo_start_xmit() may access netfront_info->queues which is freed by talk_to_netback()->xennet_destroy_queues(). This patch is to netif_device_detach() at the beginning of xen-netfront resuming, and netif_device_attach() at the end of resuming. CPU A CPU B talk_to_netback() -> if (info->queues) xennet_destroy_queues(info); to free netfront_info->queues xennet_start_xmit() to access netfront_info->queues -> err = xennet_create_queues(info, &num_queues); The idea is borrowed from virtio-net. Cc: Joe Jin Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index e31b98403f31..fc41ba95f81d 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1730,6 +1730,10 @@ static int netfront_resume(struct xenbus_device *dev) dev_dbg(&dev->dev, "%s\n", dev->nodename); + netif_tx_lock_bh(info->netdev); + netif_device_detach(info->netdev); + netif_tx_unlock_bh(info->netdev); + xennet_disconnect_backend(info); return 0; } @@ -2349,6 +2353,10 @@ static int xennet_connect(struct net_device *dev) * domain a kick because we've probably just requeued some * packets. */ + netif_tx_lock_bh(np->netdev); + netif_device_attach(np->netdev); + netif_tx_unlock_bh(np->netdev); + netif_carrier_on(np->netdev); for (j = 0; j < num_queues; ++j) { queue = &np->queues[j]; -- cgit v1.2.3-70-g09d2 From 6a8b357278f5f8b9817147277ab8f12879dce8a8 Mon Sep 17 00:00:00 2001 From: Dave Ertman Date: Thu, 7 Oct 2021 08:40:31 -0700 Subject: ice: Respond to a NETDEV_UNREGISTER event for LAG When the PF is a member of a link aggregate, and the driver is removed, the process will hang unless we respond to the NETDEV_UNREGISTER event that is sent to the event_handler for LAG. Add a case statement for the ice_lag_event_handler to unlink the PF from the link aggregate. Also remove code that was incorrectly applying a dev_hold to peer_netdevs that were associated with the ice driver. Fixes: df006dd4b1dc ("ice: Add initial support framework for LAG") Signed-off-by: Dave Ertman Tested-by: Tony Brelinski Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_lag.c | 18 ++++-------------- 1 file changed, 4 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_lag.c b/drivers/net/ethernet/intel/ice/ice_lag.c index 37c18c66b5c7..e375ac849aec 100644 --- a/drivers/net/ethernet/intel/ice/ice_lag.c +++ b/drivers/net/ethernet/intel/ice/ice_lag.c @@ -100,9 +100,9 @@ static void ice_display_lag_info(struct ice_lag *lag) */ static void ice_lag_info_event(struct ice_lag *lag, void *ptr) { - struct net_device *event_netdev, *netdev_tmp; struct netdev_notifier_bonding_info *info; struct netdev_bonding_info *bonding_info; + struct net_device *event_netdev; const char *lag_netdev_name; event_netdev = netdev_notifier_info_to_dev(ptr); @@ -123,19 +123,6 @@ static void ice_lag_info_event(struct ice_lag *lag, void *ptr) goto lag_out; } - rcu_read_lock(); - for_each_netdev_in_bond_rcu(lag->upper_netdev, netdev_tmp) { - if (!netif_is_ice(netdev_tmp)) - continue; - - if (netdev_tmp && netdev_tmp != lag->netdev && - lag->peer_netdev != netdev_tmp) { - dev_hold(netdev_tmp); - lag->peer_netdev = netdev_tmp; - } - } - rcu_read_unlock(); - if (bonding_info->slave.state) ice_lag_set_backup(lag); else @@ -319,6 +306,9 @@ ice_lag_event_handler(struct notifier_block *notif_blk, unsigned long event, case NETDEV_BONDING_INFO: ice_lag_info_event(lag, ptr); break; + case NETDEV_UNREGISTER: + ice_lag_unlink(lag, ptr); + break; default: break; } -- cgit v1.2.3-70-g09d2 From fd1b5beb177a8372cea2a0d014835491e4886f77 Mon Sep 17 00:00:00 2001 From: Yongxin Liu Date: Mon, 11 Oct 2021 15:02:16 +0800 Subject: ice: check whether PTP is initialized in ice_ptp_release() PTP is currently only supported on E810 devices, it is checked in ice_ptp_init(). However, there is no check in ice_ptp_release(). For other E800 series devices, ice_ptp_release() will be wrongly executed. Fix the following calltrace. INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. Workqueue: ice ice_service_task [ice] Call Trace: dump_stack_lvl+0x5b/0x82 dump_stack+0x10/0x12 register_lock_class+0x495/0x4a0 ? find_held_lock+0x3c/0xb0 __lock_acquire+0x71/0x1830 lock_acquire+0x1e6/0x330 ? ice_ptp_release+0x3c/0x1e0 [ice] ? _raw_spin_lock+0x19/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] _raw_spin_lock+0x38/0x70 ? ice_ptp_release+0x3c/0x1e0 [ice] ice_ptp_release+0x3c/0x1e0 [ice] ice_prepare_for_reset+0xcb/0xe0 [ice] ice_do_reset+0x38/0x110 [ice] ice_service_task+0x138/0xf10 [ice] ? __this_cpu_preempt_check+0x13/0x20 process_one_work+0x26a/0x650 worker_thread+0x3f/0x3b0 ? __kthread_parkme+0x51/0xb0 ? process_one_work+0x650/0x650 kthread+0x161/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 4dd0d5c33c3e ("ice: add lock around Tx timestamp tracker flush") Signed-off-by: Yongxin Liu Reviewed-by: Jacob Keller Tested-by: Gurucharan G Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_ptp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_ptp.c b/drivers/net/ethernet/intel/ice/ice_ptp.c index 80380aed8882..d1ef3d48a4b0 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp.c +++ b/drivers/net/ethernet/intel/ice/ice_ptp.c @@ -1571,6 +1571,9 @@ err_kworker: */ void ice_ptp_release(struct ice_pf *pf) { + if (!test_bit(ICE_FLAG_PTP, pf->flags)) + return; + /* Disable timestamping for both Tx and Rx */ ice_ptp_cfg_timestamp(pf, false); -- cgit v1.2.3-70-g09d2 From 759635760a804b0d8ad0cc677b650f1544cae22f Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Sun, 24 Oct 2021 09:40:14 +0300 Subject: mlxsw: pci: Recycle received packet upon allocation failure When the driver fails to allocate a new Rx buffer, it passes an empty Rx descriptor (contains zero address and size) to the device and marks it as invalid by setting the skb pointer in the descriptor's metadata to NULL. After processing enough Rx descriptors, the driver will try to process the invalid descriptor, but will return immediately seeing that the skb pointer is NULL. Since the driver no longer passes new Rx descriptors to the device, the Rx queue will eventually become full and the device will start to drop packets. Fix this by recycling the received packet if allocation of the new packet failed. This means that allocation is no longer performed at the end of the Rx routine, but at the start, before tearing down the DMA mapping of the received packet. Remove the comment about the descriptor being zeroed as it is no longer correct. This is OK because we either use the descriptor as-is (when recycling) or overwrite its address and size fields with that of the newly allocated Rx buffer. The issue was discovered when a process ("perf") consumed too much memory and put the system under memory pressure. It can be reproduced by injecting slab allocation failures [1]. After the fix, the Rx queue no longer comes to a halt. [1] # echo 10 > /sys/kernel/debug/failslab/times # echo 1000 > /sys/kernel/debug/failslab/interval # echo 100 > /sys/kernel/debug/failslab/probability FAULT_INJECTION: forcing a failure. name failslab, interval 1000, probability 100, space 0, times 8 [...] Call Trace: dump_stack_lvl+0x34/0x44 should_fail.cold+0x32/0x37 should_failslab+0x5/0x10 kmem_cache_alloc_node+0x23/0x190 __alloc_skb+0x1f9/0x280 __netdev_alloc_skb+0x3a/0x150 mlxsw_pci_rdq_skb_alloc+0x24/0x90 mlxsw_pci_cq_tasklet+0x3dc/0x1200 tasklet_action_common.constprop.0+0x9f/0x100 __do_softirq+0xb5/0x252 irq_exit_rcu+0x7a/0xa0 common_interrupt+0x83/0xa0 asm_common_interrupt+0x1e/0x40 RIP: 0010:cpuidle_enter_state+0xc8/0x340 [...] mlxsw_spectrum2 0000:06:00.0: Failed to alloc skb for RDQ Fixes: eda6500a987a ("mlxsw: Add PCI bus implementation") Signed-off-by: Ido Schimmel Reviewed-by: Petr Machata Link: https://lore.kernel.org/r/20211024064014.1060919-1-idosch@idosch.org Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlxsw/pci.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index 13b0259f7ea6..fcace73eae40 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -353,13 +353,10 @@ static int mlxsw_pci_rdq_skb_alloc(struct mlxsw_pci *mlxsw_pci, struct sk_buff *skb; int err; - elem_info->u.rdq.skb = NULL; skb = netdev_alloc_skb_ip_align(NULL, buf_len); if (!skb) return -ENOMEM; - /* Assume that wqe was previously zeroed. */ - err = mlxsw_pci_wqe_frag_map(mlxsw_pci, wqe, 0, skb->data, buf_len, DMA_FROM_DEVICE); if (err) @@ -597,21 +594,26 @@ static void mlxsw_pci_cqe_rdq_handle(struct mlxsw_pci *mlxsw_pci, struct pci_dev *pdev = mlxsw_pci->pdev; struct mlxsw_pci_queue_elem_info *elem_info; struct mlxsw_rx_info rx_info = {}; - char *wqe; + char wqe[MLXSW_PCI_WQE_SIZE]; struct sk_buff *skb; u16 byte_count; int err; elem_info = mlxsw_pci_queue_elem_info_consumer_get(q); - skb = elem_info->u.sdq.skb; - if (!skb) - return; - wqe = elem_info->elem; - mlxsw_pci_wqe_frag_unmap(mlxsw_pci, wqe, 0, DMA_FROM_DEVICE); + skb = elem_info->u.rdq.skb; + memcpy(wqe, elem_info->elem, MLXSW_PCI_WQE_SIZE); if (q->consumer_counter++ != consumer_counter_limit) dev_dbg_ratelimited(&pdev->dev, "Consumer counter does not match limit in RDQ\n"); + err = mlxsw_pci_rdq_skb_alloc(mlxsw_pci, elem_info); + if (err) { + dev_err_ratelimited(&pdev->dev, "Failed to alloc skb for RDQ\n"); + goto out; + } + + mlxsw_pci_wqe_frag_unmap(mlxsw_pci, wqe, 0, DMA_FROM_DEVICE); + if (mlxsw_pci_cqe_lag_get(cqe_v, cqe)) { rx_info.is_lag = true; rx_info.u.lag_id = mlxsw_pci_cqe_lag_id_get(cqe_v, cqe); @@ -647,10 +649,7 @@ static void mlxsw_pci_cqe_rdq_handle(struct mlxsw_pci *mlxsw_pci, skb_put(skb, byte_count); mlxsw_core_skb_receive(mlxsw_pci->core, skb, &rx_info); - memset(wqe, 0, q->elem_size); - err = mlxsw_pci_rdq_skb_alloc(mlxsw_pci, elem_info); - if (err) - dev_dbg_ratelimited(&pdev->dev, "Failed to alloc skb for RDQ\n"); +out: /* Everything is set up, ring doorbell to pass elem to HW */ q->producer_counter++; mlxsw_pci_queue_doorbell_producer_ring(mlxsw_pci, q); -- cgit v1.2.3-70-g09d2 From 2195f2062e4cc93870da8e71c318ef98a1c51cef Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Mon, 25 Oct 2021 16:49:36 +0200 Subject: nfc: port100: fix using -ERRNO as command type mask During probing, the driver tries to get a list (mask) of supported command types in port100_get_command_type_mask() function. The value is u64 and 0 is treated as invalid mask (no commands supported). The function however returns also -ERRNO as u64 which will be interpret as valid command mask. Return 0 on every error case of port100_get_command_type_mask(), so the probing will stop. Cc: Fixes: 0347a6ab300a ("NFC: port100: Commands mechanism implementation") Signed-off-by: Krzysztof Kozlowski Signed-off-by: David S. Miller --- drivers/nfc/port100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/nfc/port100.c b/drivers/nfc/port100.c index 517376c43b86..16ceb763594f 100644 --- a/drivers/nfc/port100.c +++ b/drivers/nfc/port100.c @@ -1006,11 +1006,11 @@ static u64 port100_get_command_type_mask(struct port100 *dev) skb = port100_alloc_skb(dev, 0); if (!skb) - return -ENOMEM; + return 0; resp = port100_send_cmd_sync(dev, PORT100_CMD_GET_COMMAND_TYPE, skb); if (IS_ERR(resp)) - return PTR_ERR(resp); + return 0; if (resp->len < 8) mask = 0; -- cgit v1.2.3-70-g09d2 From db6c3c064f5d55fa9969f33eafca3cdbefbb3541 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 26 Oct 2021 12:36:17 +0200 Subject: net: lan78xx: fix division by zero in send path Add the missing endpoint max-packet sanity check to probe() to avoid division by zero in lan78xx_tx_bh() in case a malicious device has broken descriptors (or when doing descriptor fuzz testing). Note that USB core will reject URBs submitted for endpoints with zero wMaxPacketSize but that drivers doing packet-size calculations still need to handle this (cf. commit 2548288b4fb0 ("USB: Fix: Don't skip endpoint descriptors with maxpacket=0")). Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Cc: stable@vger.kernel.org # 4.3 Cc: Woojung.Huh@microchip.com Signed-off-by: Johan Hovold Signed-off-by: David S. Miller --- drivers/net/usb/lan78xx.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c index 793f8fbe0069..63cd72c5f580 100644 --- a/drivers/net/usb/lan78xx.c +++ b/drivers/net/usb/lan78xx.c @@ -4122,6 +4122,12 @@ static int lan78xx_probe(struct usb_interface *intf, dev->maxpacket = usb_maxpacket(dev->udev, dev->pipe_out, 1); + /* Reject broken descriptors. */ + if (dev->maxpacket == 0) { + ret = -ENODEV; + goto out4; + } + /* driver requires remote-wakeup capability during autosuspend. */ intf->needs_remote_wakeup = 1; -- cgit v1.2.3-70-g09d2 From 3bda2e5df476417b6d08967e2d84234a59d57b1c Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 27 Oct 2021 20:11:43 +0800 Subject: net: hns3: fix pause config problem after autoneg disabled If a TP port is configured by follow steps: 1.ethtool -s ethx autoneg off speed 100 duplex full 2.ethtool -A ethx rx on tx on 3.ethtool -s ethx autoneg on(rx&tx negotiated pause results are off) 4.ethtool -s ethx autoneg off speed 100 duplex full In step 3, driver will set rx&tx pause parameters of hardware to off as pause parameters negotiated with link partner are off. After step 4, the "ethtool -a ethx" command shows both rx and tx pause parameters are on. However, pause parameters of hardware are still off and port has no flow control function actually. To fix this problem, if autoneg is disabled, driver uses its saved parameters to restore pause of hardware. If the speed is not changed in this case, there is no link state changed for phy, it will cause the pause parameter is not taken effect, so we need to force phy to go down and up. Fixes: aacbe27e82f0 ("net: hns3: modify how pause options is displayed") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 33 ++++++++++++++++------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 30 ++++++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 + 5 files changed, 57 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index d701451596c8..da3a593f6a56 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -568,6 +568,7 @@ struct hnae3_ae_ops { u32 *auto_neg, u32 *rx_en, u32 *tx_en); int (*set_pauseparam)(struct hnae3_handle *handle, u32 auto_neg, u32 rx_en, u32 tx_en); + int (*restore_pauseparam)(struct hnae3_handle *handle); int (*set_autoneg)(struct hnae3_handle *handle, bool enable); int (*get_autoneg)(struct hnae3_handle *handle); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 5ebd96f6833d..7d92dd273ed7 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -824,6 +824,26 @@ static int hns3_check_ksettings_param(const struct net_device *netdev, return 0; } +static int hns3_set_phy_link_ksettings(struct net_device *netdev, + const struct ethtool_link_ksettings *cmd) +{ + struct hnae3_handle *handle = hns3_get_handle(netdev); + const struct hnae3_ae_ops *ops = handle->ae_algo->ops; + int ret; + + if (cmd->base.speed == SPEED_1000 && + cmd->base.autoneg == AUTONEG_DISABLE) + return -EINVAL; + + if (cmd->base.autoneg == AUTONEG_DISABLE && ops->restore_pauseparam) { + ret = ops->restore_pauseparam(handle); + if (ret) + return ret; + } + + return phy_ethtool_ksettings_set(netdev->phydev, cmd); +} + static int hns3_set_link_ksettings(struct net_device *netdev, const struct ethtool_link_ksettings *cmd) { @@ -842,16 +862,11 @@ static int hns3_set_link_ksettings(struct net_device *netdev, cmd->base.autoneg, cmd->base.speed, cmd->base.duplex); /* Only support ksettings_set for netdev with phy attached for now */ - if (netdev->phydev) { - if (cmd->base.speed == SPEED_1000 && - cmd->base.autoneg == AUTONEG_DISABLE) - return -EINVAL; - - return phy_ethtool_ksettings_set(netdev->phydev, cmd); - } else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && - ops->set_phy_link_ksettings) { + if (netdev->phydev) + return hns3_set_phy_link_ksettings(netdev, cmd); + else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && + ops->set_phy_link_ksettings) return ops->set_phy_link_ksettings(handle, cmd); - } if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2) return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index dcd40cc73082..c6b9806c75a5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11021,6 +11021,35 @@ static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg, return -EOPNOTSUPP; } +static int hclge_restore_pauseparam(struct hnae3_handle *handle) +{ + struct hclge_vport *vport = hclge_get_vport(handle); + struct hclge_dev *hdev = vport->back; + u32 auto_neg, rx_pause, tx_pause; + int ret; + + hclge_get_pauseparam(handle, &auto_neg, &rx_pause, &tx_pause); + /* when autoneg is disabled, the pause setting of phy has no effect + * unless the link goes down. + */ + ret = phy_suspend(hdev->hw.mac.phydev); + if (ret) + return ret; + + phy_set_asym_pause(hdev->hw.mac.phydev, rx_pause, tx_pause); + + ret = phy_resume(hdev->hw.mac.phydev); + if (ret) + return ret; + + ret = hclge_mac_pause_setup_hw(hdev); + if (ret) + dev_err(&hdev->pdev->dev, + "restore pauseparam error, ret = %d.\n", ret); + + return ret; +} + static void hclge_get_ksettings_an_result(struct hnae3_handle *handle, u8 *auto_neg, u32 *speed, u8 *duplex) { @@ -12984,6 +13013,7 @@ static const struct hnae3_ae_ops hclge_ops = { .halt_autoneg = hclge_halt_autoneg, .get_pauseparam = hclge_get_pauseparam, .set_pauseparam = hclge_set_pauseparam, + .restore_pauseparam = hclge_restore_pauseparam, .set_mtu = hclge_set_mtu, .reset_queue = hclge_reset_tqp, .get_stats = hclge_get_stats, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 95074e91a846..124791e4bfee 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -1435,7 +1435,7 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) return 0; } -static int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) +int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) { bool tx_en, rx_en; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h index 2ee9b795f71d..4b2c3a788980 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h @@ -244,6 +244,7 @@ int hclge_tm_get_pri_weight(struct hclge_dev *hdev, u8 pri_id, u8 *weight); int hclge_tm_get_pri_shaper(struct hclge_dev *hdev, u8 pri_id, enum hclge_opcode_type cmd, struct hclge_tm_shaper_para *para); +int hclge_mac_pause_setup_hw(struct hclge_dev *hdev); int hclge_tm_get_q_to_qs_map(struct hclge_dev *hdev, u16 q_id, u16 *qset_id); int hclge_tm_get_q_to_tc(struct hclge_dev *hdev, u16 q_id, u8 *tc_id); int hclge_tm_get_pg_to_pri_map(struct hclge_dev *hdev, u8 pg_id, -- cgit v1.2.3-70-g09d2 From f29da4088fb4eeba457219a931327d1d5f45196a Mon Sep 17 00:00:00 2001 From: Yufeng Mo Date: Wed, 27 Oct 2021 20:11:44 +0800 Subject: net: hns3: change hclge/hclgevf workqueue to WQ_UNBOUND mode Currently, the workqueue of hclge/hclgevf is executed on the CPU that initiates scheduling requests by default. In stress scenarios, the CPU may be busy and workqueue scheduling is completed after a long period of time. To avoid this situation and implement proper scheduling, use the WQ_UNBOUND mode instead. In this way, the workqueue can be performed on a relatively idle CPU. Signed-off-by: Yufeng Mo Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 34 ++++------------------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 2 +- 3 files changed, 6 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c6b9806c75a5..3dbde0496545 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2847,33 +2847,28 @@ static void hclge_mbx_task_schedule(struct hclge_dev *hdev) { if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) && !test_and_set_bit(HCLGE_STATE_MBX_SERVICE_SCHED, &hdev->state)) - mod_delayed_work_on(cpumask_first(&hdev->affinity_mask), - hclge_wq, &hdev->service_task, 0); + mod_delayed_work(hclge_wq, &hdev->service_task, 0); } static void hclge_reset_task_schedule(struct hclge_dev *hdev) { if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) && !test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state)) - mod_delayed_work_on(cpumask_first(&hdev->affinity_mask), - hclge_wq, &hdev->service_task, 0); + mod_delayed_work(hclge_wq, &hdev->service_task, 0); } static void hclge_errhand_task_schedule(struct hclge_dev *hdev) { if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) && !test_and_set_bit(HCLGE_STATE_ERR_SERVICE_SCHED, &hdev->state)) - mod_delayed_work_on(cpumask_first(&hdev->affinity_mask), - hclge_wq, &hdev->service_task, 0); + mod_delayed_work(hclge_wq, &hdev->service_task, 0); } void hclge_task_schedule(struct hclge_dev *hdev, unsigned long delay_time) { if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) && !test_bit(HCLGE_STATE_RST_FAIL, &hdev->state)) - mod_delayed_work_on(cpumask_first(&hdev->affinity_mask), - hclge_wq, &hdev->service_task, - delay_time); + mod_delayed_work(hclge_wq, &hdev->service_task, delay_time); } static int hclge_get_mac_link_status(struct hclge_dev *hdev, int *link_status) @@ -3491,33 +3486,14 @@ static void hclge_get_misc_vector(struct hclge_dev *hdev) hdev->num_msi_used += 1; } -static void hclge_irq_affinity_notify(struct irq_affinity_notify *notify, - const cpumask_t *mask) -{ - struct hclge_dev *hdev = container_of(notify, struct hclge_dev, - affinity_notify); - - cpumask_copy(&hdev->affinity_mask, mask); -} - -static void hclge_irq_affinity_release(struct kref *ref) -{ -} - static void hclge_misc_affinity_setup(struct hclge_dev *hdev) { irq_set_affinity_hint(hdev->misc_vector.vector_irq, &hdev->affinity_mask); - - hdev->affinity_notify.notify = hclge_irq_affinity_notify; - hdev->affinity_notify.release = hclge_irq_affinity_release; - irq_set_affinity_notifier(hdev->misc_vector.vector_irq, - &hdev->affinity_notify); } static void hclge_misc_affinity_teardown(struct hclge_dev *hdev) { - irq_set_affinity_notifier(hdev->misc_vector.vector_irq, NULL); irq_set_affinity_hint(hdev->misc_vector.vector_irq, NULL); } @@ -13082,7 +13058,7 @@ static int hclge_init(void) { pr_info("%s is initializing\n", HCLGE_NAME); - hclge_wq = alloc_workqueue("%s", 0, 0, HCLGE_NAME); + hclge_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, HCLGE_NAME); if (!hclge_wq) { pr_err("%s: failed to create workqueue\n", HCLGE_NAME); return -ENOMEM; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index de6afbcbfbac..69cd8f87b4c8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -944,7 +944,6 @@ struct hclge_dev { /* affinity mask and notify for misc interrupt */ cpumask_t affinity_mask; - struct irq_affinity_notify affinity_notify; struct hclge_ptp *ptp; struct devlink *devlink; }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index bef6b98e2f50..5efa5420297d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -3899,7 +3899,7 @@ static int hclgevf_init(void) { pr_info("%s is initializing\n", HCLGEVF_NAME); - hclgevf_wq = alloc_workqueue("%s", 0, 0, HCLGEVF_NAME); + hclgevf_wq = alloc_workqueue("%s", WQ_UNBOUND, 0, HCLGEVF_NAME); if (!hclgevf_wq) { pr_err("%s: failed to create workqueue\n", HCLGEVF_NAME); return -ENOMEM; -- cgit v1.2.3-70-g09d2 From 0251d196b0e1a19c870be882e5d4f496de8ab758 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 27 Oct 2021 20:11:45 +0800 Subject: net: hns3: ignore reset event before initialization process is done Currently, if there is a reset event triggered by RAS during device in initialization process, driver may run reset process concurrently with initialization process. In this case, it may cause problem. For example, the RSS indirection table may has not been alloc memory in initialization process yet, but it is used in reset process, it will cause a call trace like this: [61228.744836] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... [61228.897677] Workqueue: hclgevf hclgevf_service_task [hclgevf] [61228.911390] pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--) [61228.918670] pc : hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61228.927812] lr : hclgevf_set_rss_indir_table+0x90/0x190 [hclgevf] [61228.937248] sp : ffff8000162ebb50 [61228.941087] x29: ffff8000162ebb50 x28: ffffb77add72dbc0 x27: ffff0820c7dc8080 [61228.949516] x26: 0000000000000000 x25: ffff0820ad4fc880 x24: ffff0820c7dc8080 [61228.958220] x23: ffff0820c7dc8090 x22: 00000000ffffffff x21: 0000000000000040 [61228.966360] x20: ffffb77add72b9c0 x19: 0000000000000000 x18: 0000000000000030 [61228.974646] x17: 0000000000000000 x16: ffffb77ae713feb0 x15: ffff0820ad4fcce8 [61228.982808] x14: ffffffffffffffff x13: ffff8000962eb7f7 x12: 00003834ec70c960 [61228.991990] x11: 00e0fafa8c206982 x10: 9670facc78a8f9a8 x9 : ffffb77add717530 [61229.001123] x8 : ffff0820ad4fd6b8 x7 : 0000000000000000 x6 : 0000000000000011 [61229.010249] x5 : 00000000000cb1b0 x4 : 0000000000002adb x3 : 0000000000000049 [61229.018662] x2 : ffff8000162ebbb8 x1 : 0000000000000000 x0 : 0000000000000480 [61229.027002] Call trace: [61229.030177] hclgevf_set_rss_indir_table+0xb4/0x190 [hclgevf] [61229.039009] hclgevf_rss_init_hw+0x128/0x1b4 [hclgevf] [61229.046809] hclgevf_reset_rebuild+0x17c/0x69c [hclgevf] [61229.053862] hclgevf_reset_service_task+0x4cc/0xa80 [hclgevf] [61229.061306] hclgevf_service_task+0x6c/0x630 [hclgevf] [61229.068491] process_one_work+0x1dc/0x48c [61229.074121] worker_thread+0x15c/0x464 [61229.078562] kthread+0x168/0x16c [61229.082873] ret_from_fork+0x10/0x18 [61229.088221] Code: 7900e7f6 f904a683 d503201f 9101a3e2 (38616b43) [61229.095357] ---[ end trace 153661a538f6768c ]--- To fix this problem, don't schedule reset task before initialization process is done. Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 3 +++ drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 1 + 3 files changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 3dbde0496545..269e579762b2 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -2853,6 +2853,7 @@ static void hclge_mbx_task_schedule(struct hclge_dev *hdev) static void hclge_reset_task_schedule(struct hclge_dev *hdev) { if (!test_bit(HCLGE_STATE_REMOVING, &hdev->state) && + test_bit(HCLGE_STATE_SERVICE_INITED, &hdev->state) && !test_and_set_bit(HCLGE_STATE_RST_SERVICE_SCHED, &hdev->state)) mod_delayed_work(hclge_wq, &hdev->service_task, 0); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 5efa5420297d..cf00ad7bb881 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -2232,6 +2232,7 @@ static void hclgevf_get_misc_vector(struct hclgevf_dev *hdev) void hclgevf_reset_task_schedule(struct hclgevf_dev *hdev) { if (!test_bit(HCLGEVF_STATE_REMOVING, &hdev->state) && + test_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state) && !test_and_set_bit(HCLGEVF_STATE_RST_SERVICE_SCHED, &hdev->state)) mod_delayed_work(hclgevf_wq, &hdev->service_task, 0); @@ -3449,6 +3450,8 @@ static int hclgevf_init_hdev(struct hclgevf_dev *hdev) hclgevf_init_rxd_adv_layout(hdev); + set_bit(HCLGEVF_STATE_SERVICE_INITED, &hdev->state); + hdev->last_reset_time = jiffies; dev_info(&hdev->pdev->dev, "finished initializing %s driver\n", HCLGEVF_DRIVER_NAME); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index 883130a9b48f..28288d7e3303 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -146,6 +146,7 @@ enum hclgevf_states { HCLGEVF_STATE_REMOVING, HCLGEVF_STATE_NIC_REGISTERED, HCLGEVF_STATE_ROCE_REGISTERED, + HCLGEVF_STATE_SERVICE_INITED, /* task states */ HCLGEVF_STATE_RST_SERVICE_SCHED, HCLGEVF_STATE_RST_HANDLING, -- cgit v1.2.3-70-g09d2 From 2a21dab594a98c338c4bfbc31864cbca15888549 Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Wed, 27 Oct 2021 20:11:46 +0800 Subject: net: hns3: fix data endian problem of some functions of debugfs The member data in struct hclge_desc is type of __le32, it needs endian conversion before using it, and some functions of debugfs didn't do that, so this patch fixes it. Fixes: c0ebebb9ccc1 ("net: hns3: Add "dcb register" status information query function") Signed-off-by: Jie Wang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 30 ++++++++++------------ 1 file changed, 14 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c index 32f62cd2dd99..9cda8b3562b8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c @@ -391,7 +391,7 @@ static int hclge_dbg_dump_mac(struct hclge_dev *hdev, char *buf, int len) static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len, int *pos) { - struct hclge_dbg_bitmap_cmd *bitmap; + struct hclge_dbg_bitmap_cmd req; struct hclge_desc desc; u16 qset_id, qset_num; int ret; @@ -408,12 +408,12 @@ static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len, if (ret) return ret; - bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1]; + req.bitmap = (u8)le32_to_cpu(desc.data[1]); *pos += scnprintf(buf + *pos, len - *pos, "%04u %#x %#x %#x %#x\n", - qset_id, bitmap->bit0, bitmap->bit1, - bitmap->bit2, bitmap->bit3); + qset_id, req.bit0, req.bit1, req.bit2, + req.bit3); } return 0; @@ -422,7 +422,7 @@ static int hclge_dbg_dump_dcb_qset(struct hclge_dev *hdev, char *buf, int len, static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len, int *pos) { - struct hclge_dbg_bitmap_cmd *bitmap; + struct hclge_dbg_bitmap_cmd req; struct hclge_desc desc; u8 pri_id, pri_num; int ret; @@ -439,12 +439,11 @@ static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len, if (ret) return ret; - bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1]; + req.bitmap = (u8)le32_to_cpu(desc.data[1]); *pos += scnprintf(buf + *pos, len - *pos, "%03u %#x %#x %#x\n", - pri_id, bitmap->bit0, bitmap->bit1, - bitmap->bit2); + pri_id, req.bit0, req.bit1, req.bit2); } return 0; @@ -453,7 +452,7 @@ static int hclge_dbg_dump_dcb_pri(struct hclge_dev *hdev, char *buf, int len, static int hclge_dbg_dump_dcb_pg(struct hclge_dev *hdev, char *buf, int len, int *pos) { - struct hclge_dbg_bitmap_cmd *bitmap; + struct hclge_dbg_bitmap_cmd req; struct hclge_desc desc; u8 pg_id; int ret; @@ -466,12 +465,11 @@ static int hclge_dbg_dump_dcb_pg(struct hclge_dev *hdev, char *buf, int len, if (ret) return ret; - bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1]; + req.bitmap = (u8)le32_to_cpu(desc.data[1]); *pos += scnprintf(buf + *pos, len - *pos, "%03u %#x %#x %#x\n", - pg_id, bitmap->bit0, bitmap->bit1, - bitmap->bit2); + pg_id, req.bit0, req.bit1, req.bit2); } return 0; @@ -511,7 +509,7 @@ static int hclge_dbg_dump_dcb_queue(struct hclge_dev *hdev, char *buf, int len, static int hclge_dbg_dump_dcb_port(struct hclge_dev *hdev, char *buf, int len, int *pos) { - struct hclge_dbg_bitmap_cmd *bitmap; + struct hclge_dbg_bitmap_cmd req; struct hclge_desc desc; u8 port_id = 0; int ret; @@ -521,12 +519,12 @@ static int hclge_dbg_dump_dcb_port(struct hclge_dev *hdev, char *buf, int len, if (ret) return ret; - bitmap = (struct hclge_dbg_bitmap_cmd *)&desc.data[1]; + req.bitmap = (u8)le32_to_cpu(desc.data[1]); *pos += scnprintf(buf + *pos, len - *pos, "port_mask: %#x\n", - bitmap->bit0); + req.bit0); *pos += scnprintf(buf + *pos, len - *pos, "port_shaping_pass: %#x\n", - bitmap->bit1); + req.bit1); return 0; } -- cgit v1.2.3-70-g09d2 From 6754614a787cbcbf87bae8a75619c24a33ea6791 Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Wed, 27 Oct 2021 20:11:47 +0800 Subject: net: hns3: add more string spaces for dumping packets number of queue info in debugfs As the width of packets number registers is 32 bits, they needs at most 10 characters for decimal data printing, but now the string spaces is not enough, so this patch fixes it. Fixes: e44c495d95e ("net: hns3: refactor queue info of debugfs") Signed-off-by: Jie Wang Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index 2b66c59f5eaf..3aaad96d0176 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -462,7 +462,7 @@ static const struct hns3_dbg_item rx_queue_info_items[] = { { "TAIL", 2 }, { "HEAD", 2 }, { "FBDNUM", 2 }, - { "PKTNUM", 2 }, + { "PKTNUM", 5 }, { "COPYBREAK", 2 }, { "RING_EN", 2 }, { "RX_RING_EN", 2 }, @@ -565,7 +565,7 @@ static const struct hns3_dbg_item tx_queue_info_items[] = { { "HEAD", 2 }, { "FBDNUM", 2 }, { "OFFSET", 2 }, - { "PKTNUM", 2 }, + { "PKTNUM", 5 }, { "RING_EN", 2 }, { "TX_RING_EN", 2 }, { "BASE_ADDR", 10 }, -- cgit v1.2.3-70-g09d2 From c7a6e3978ea952efb107ecf511c095c3bbb2945f Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 27 Oct 2021 20:11:48 +0800 Subject: net: hns3: expand buffer len for some debugfs command The specified buffer length for three debugfs files fd_tcam, uc and tqp is not enough for their maximum needs, so this patch fixes them. Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Fixes: 1556ea9120ff ("net: hns3: refactor dump mac list of debugfs") Fixes: d96b0e59468d ("net: hns3: refactor dump reg of debugfs") Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index 3aaad96d0176..f2ade0446208 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -137,7 +137,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = { .name = "uc", .cmd = HNAE3_DBG_CMD_MAC_UC, .dentry = HNS3_DBG_DENTRY_MAC, - .buf_len = HNS3_DBG_READ_LEN, + .buf_len = HNS3_DBG_READ_LEN_128KB, .init = hns3_dbg_common_file_init, }, { @@ -256,7 +256,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = { .name = "tqp", .cmd = HNAE3_DBG_CMD_REG_TQP, .dentry = HNS3_DBG_DENTRY_REG, - .buf_len = HNS3_DBG_READ_LEN, + .buf_len = HNS3_DBG_READ_LEN_128KB, .init = hns3_dbg_common_file_init, }, { @@ -298,7 +298,7 @@ static struct hns3_dbg_cmd_info hns3_dbg_cmd[] = { .name = "fd_tcam", .cmd = HNAE3_DBG_CMD_FD_TCAM, .dentry = HNS3_DBG_DENTRY_FD, - .buf_len = HNS3_DBG_READ_LEN, + .buf_len = HNS3_DBG_READ_LEN_1MB, .init = hns3_dbg_common_file_init, }, { -- cgit v1.2.3-70-g09d2 From 630a6738da82e2c29e1c38eafd6f8328e0a4963c Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Wed, 27 Oct 2021 20:11:49 +0800 Subject: net: hns3: adjust string spaces of some parameters of tx bd info in debugfs This patch adjusts the string spaces of some parameters of tx bd info in debugfs according to their maximum needs. Signed-off-by: Guangbin Huang Signed-off-by: David S. Miller --- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c index f2ade0446208..e54f96251fea 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c @@ -790,13 +790,13 @@ static int hns3_dbg_rx_bd_info(struct hns3_dbg_data *d, char *buf, int len) } static const struct hns3_dbg_item tx_bd_info_items[] = { - { "BD_IDX", 5 }, - { "ADDRESS", 2 }, + { "BD_IDX", 2 }, + { "ADDRESS", 13 }, { "VLAN_TAG", 2 }, { "SIZE", 2 }, { "T_CS_VLAN_TSO", 2 }, { "OT_VLAN_TAG", 3 }, - { "TV", 2 }, + { "TV", 5 }, { "OLT_VLAN_LEN", 2 }, { "PAYLEN_OL4CS", 2 }, { "BD_FE_SC_VLD", 2 }, -- cgit v1.2.3-70-g09d2 From 6f7c88691191e6c52ef2543d6f1da8d360b27a24 Mon Sep 17 00:00:00 2001 From: Wang Hai Date: Tue, 26 Oct 2021 20:40:15 +0800 Subject: usbnet: fix error return code in usbnet_probe() Return error code if usb_maxpacket() returns 0 in usbnet_probe() Fixes: 397430b50a36 ("usbnet: sanity check for maxpacket") Reported-by: Hulk Robot Signed-off-by: Wang Hai Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20211026124015.3025136-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 80432ee0ce69..a33d7fb82a00 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1790,6 +1790,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1); if (dev->maxpacket == 0) { /* that is a broken device */ + status = -ENODEV; goto out4; } -- cgit v1.2.3-70-g09d2 From 72f898ca0ab85fde6facf78b14d9f67a4a7b32d1 Mon Sep 17 00:00:00 2001 From: Janghyub Seo Date: Tue, 26 Oct 2021 07:12:42 +0000 Subject: r8169: Add device 10ec:8162 to driver r8169 This patch makes the driver r8169 pick up device Realtek Semiconductor Co. , Ltd. Device [10ec:8162]. Signed-off-by: Janghyub Seo Suggested-by: Rushab Shah Link: https://lore.kernel.org/r/1635231849296.1489250046.441294000@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 46a6ff9a782d..2918947dd57c 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -157,6 +157,7 @@ static const struct pci_device_id rtl8169_pci_tbl[] = { { PCI_VDEVICE(REALTEK, 0x8129) }, { PCI_VDEVICE(REALTEK, 0x8136), RTL_CFG_NO_GBIT }, { PCI_VDEVICE(REALTEK, 0x8161) }, + { PCI_VDEVICE(REALTEK, 0x8162) }, { PCI_VDEVICE(REALTEK, 0x8167) }, { PCI_VDEVICE(REALTEK, 0x8168) }, { PCI_VDEVICE(NCUBE, 0x8168) }, -- cgit v1.2.3-70-g09d2 From 9159f102402a64ac85e676b75cc1f9c62c5b4b73 Mon Sep 17 00:00:00 2001 From: Dongli Zhang Date: Tue, 26 Oct 2021 14:50:31 -0700 Subject: vmxnet3: do not stop tx queues after netif_device_detach() The netif_device_detach() conditionally stops all tx queues if the queues are running. There is no need to call netif_tx_stop_all_queues() again. Signed-off-by: Dongli Zhang Signed-off-by: David S. Miller --- drivers/net/vmxnet3/vmxnet3_drv.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/vmxnet3/vmxnet3_drv.c b/drivers/net/vmxnet3/vmxnet3_drv.c index 142f70670f5c..8799854bacb2 100644 --- a/drivers/net/vmxnet3/vmxnet3_drv.c +++ b/drivers/net/vmxnet3/vmxnet3_drv.c @@ -3833,7 +3833,6 @@ vmxnet3_suspend(struct device *device) vmxnet3_free_intr_resources(adapter); netif_device_detach(netdev); - netif_tx_stop_all_queues(netdev); /* Create wake-up filters. */ pmConf = adapter->pm_conf; -- cgit v1.2.3-70-g09d2 From 90a881fc352a953f1c8beb61977a2db0818157d4 Mon Sep 17 00:00:00 2001 From: Yu Xiao Date: Thu, 28 Oct 2021 12:00:36 +0200 Subject: nfp: bpf: relax prog rejection for mtu check through max_pkt_offset MTU change is refused whenever the value of new MTU is bigger than the max packet bytes that fits in NFP Cluster Target Memory (CTM). However, an eBPF program doesn't always need to access the whole packet data. The maximum direct packet access (DPA) offset has always been caculated by verifier and stored in the max_pkt_offset field of prog aux data. Signed-off-by: Yu Xiao Reviewed-by: Yinjun Zhang Reviewed-by: Niklas Soderlund Signed-off-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/netronome/nfp/bpf/main.c | 16 +++++++++++----- drivers/net/ethernet/netronome/nfp/bpf/main.h | 2 ++ drivers/net/ethernet/netronome/nfp/bpf/offload.c | 17 +++++++++++++---- 3 files changed, 26 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.c b/drivers/net/ethernet/netronome/nfp/bpf/main.c index 11c83a99b014..f469950c7265 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.c @@ -182,15 +182,21 @@ static int nfp_bpf_check_mtu(struct nfp_app *app, struct net_device *netdev, int new_mtu) { struct nfp_net *nn = netdev_priv(netdev); - unsigned int max_mtu; + struct nfp_bpf_vnic *bv; + struct bpf_prog *prog; if (~nn->dp.ctrl & NFP_NET_CFG_CTRL_BPF) return 0; - max_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32; - if (new_mtu > max_mtu) { - nn_info(nn, "BPF offload active, MTU over %u not supported\n", - max_mtu); + if (nn->xdp_hw.prog) { + prog = nn->xdp_hw.prog; + } else { + bv = nn->app_priv; + prog = bv->tc_prog; + } + + if (nfp_bpf_offload_check_mtu(nn, prog, new_mtu)) { + nn_info(nn, "BPF offload active, potential packet access beyond hardware packet boundary"); return -EBUSY; } return 0; diff --git a/drivers/net/ethernet/netronome/nfp/bpf/main.h b/drivers/net/ethernet/netronome/nfp/bpf/main.h index d0e17eebddd9..16841bb750b7 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/main.h +++ b/drivers/net/ethernet/netronome/nfp/bpf/main.h @@ -560,6 +560,8 @@ bool nfp_is_subprog_start(struct nfp_insn_meta *meta); void nfp_bpf_jit_prepare(struct nfp_prog *nfp_prog); int nfp_bpf_jit(struct nfp_prog *prog); bool nfp_bpf_supported_opcode(u8 code); +bool nfp_bpf_offload_check_mtu(struct nfp_net *nn, struct bpf_prog *prog, + unsigned int mtu); int nfp_verify_insn(struct bpf_verifier_env *env, int insn_idx, int prev_insn_idx); diff --git a/drivers/net/ethernet/netronome/nfp/bpf/offload.c b/drivers/net/ethernet/netronome/nfp/bpf/offload.c index 53851853562c..9d97cd281f18 100644 --- a/drivers/net/ethernet/netronome/nfp/bpf/offload.c +++ b/drivers/net/ethernet/netronome/nfp/bpf/offload.c @@ -481,19 +481,28 @@ int nfp_bpf_event_output(struct nfp_app_bpf *bpf, const void *data, return 0; } +bool nfp_bpf_offload_check_mtu(struct nfp_net *nn, struct bpf_prog *prog, + unsigned int mtu) +{ + unsigned int fw_mtu, pkt_off; + + fw_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32; + pkt_off = min(prog->aux->max_pkt_offset, mtu); + + return fw_mtu < pkt_off; +} + static int nfp_net_bpf_load(struct nfp_net *nn, struct bpf_prog *prog, struct netlink_ext_ack *extack) { struct nfp_prog *nfp_prog = prog->aux->offload->dev_priv; - unsigned int fw_mtu, pkt_off, max_stack, max_prog_len; + unsigned int max_stack, max_prog_len; dma_addr_t dma_addr; void *img; int err; - fw_mtu = nn_readb(nn, NFP_NET_CFG_BPF_INL_MTU) * 64 - 32; - pkt_off = min(prog->aux->max_pkt_offset, nn->dp.netdev->mtu); - if (fw_mtu < pkt_off) { + if (nfp_bpf_offload_check_mtu(nn, prog, nn->dp.netdev->mtu)) { NL_SET_ERR_MSG_MOD(extack, "BPF offload not supported with potential packet access beyond HW packet split boundary"); return -EOPNOTSUPP; } -- cgit v1.2.3-70-g09d2 From e8684db191e4164f3f5f3ad7dec04a6734c25f1c Mon Sep 17 00:00:00 2001 From: Yuiko Oshino Date: Wed, 27 Oct 2021 14:23:02 -0400 Subject: net: ethernet: microchip: lan743x: Fix skb allocation failure The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances. GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Yuiko Oshino Signed-off-by: David S. Miller --- drivers/net/ethernet/microchip/lan743x_main.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index c4f32c7e0db1..4d5a5d6595b3 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -1944,7 +1944,8 @@ static void lan743x_rx_update_tail(struct lan743x_rx *rx, int index) index); } -static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index) +static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index, + gfp_t gfp) { struct net_device *netdev = rx->adapter->netdev; struct device *dev = &rx->adapter->pdev->dev; @@ -1958,7 +1959,7 @@ static int lan743x_rx_init_ring_element(struct lan743x_rx *rx, int index) descriptor = &rx->ring_cpu_ptr[index]; buffer_info = &rx->buffer_info[index]; - skb = __netdev_alloc_skb(netdev, buffer_length, GFP_ATOMIC | GFP_DMA); + skb = __netdev_alloc_skb(netdev, buffer_length, gfp); if (!skb) return -ENOMEM; dma_ptr = dma_map_single(dev, skb->data, buffer_length, DMA_FROM_DEVICE); @@ -2120,7 +2121,8 @@ static int lan743x_rx_process_buffer(struct lan743x_rx *rx) /* save existing skb, allocate new skb and map to dma */ skb = buffer_info->skb; - if (lan743x_rx_init_ring_element(rx, rx->last_head)) { + if (lan743x_rx_init_ring_element(rx, rx->last_head, + GFP_ATOMIC | GFP_DMA)) { /* failed to allocate next skb. * Memory is very low. * Drop this packet and reuse buffer. @@ -2335,13 +2337,16 @@ static int lan743x_rx_ring_init(struct lan743x_rx *rx) rx->last_head = 0; for (index = 0; index < rx->ring_size; index++) { - ret = lan743x_rx_init_ring_element(rx, index); + ret = lan743x_rx_init_ring_element(rx, index, GFP_KERNEL); if (ret) goto cleanup; } return 0; cleanup: + netif_warn(rx->adapter, ifup, rx->adapter->netdev, + "Error allocating memory for LAN743x\n"); + lan743x_rx_ring_cleanup(rx); return ret; } -- cgit v1.2.3-70-g09d2 From cc45b96e2de7ada26520f101dada0abafa4ba997 Mon Sep 17 00:00:00 2001 From: Subbaraya Sundeep Date: Wed, 27 Oct 2021 23:02:32 +0530 Subject: octeontx2-af: Check whether ipolicers exists While displaying ingress policers information in debugfs check whether ingress policers exist in the hardware or not because some platforms(CN9XXX) do not have this feature. Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth") Signed-off-by: Subbaraya Sundeep Signed-off-by: Rakesh Babu Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index 9338765da048..6c589ca9b577 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -1719,6 +1719,10 @@ static int rvu_dbg_nix_band_prof_ctx_display(struct seq_file *m, void *unused) u16 pcifunc; char *str; + /* Ingress policers do not exist on all platforms */ + if (!nix_hw->ipolicer) + return 0; + for (layer = 0; layer < BAND_PROF_NUM_LAYERS; layer++) { if (layer == BAND_PROF_INVAL_LAYER) continue; @@ -1768,6 +1772,10 @@ static int rvu_dbg_nix_band_prof_rsrc_display(struct seq_file *m, void *unused) int layer; char *str; + /* Ingress policers do not exist on all platforms */ + if (!nix_hw->ipolicer) + return 0; + seq_puts(m, "\nBandwidth profile resource free count\n"); seq_puts(m, "=====================================\n"); for (layer = 0; layer < BAND_PROF_NUM_LAYERS; layer++) { -- cgit v1.2.3-70-g09d2 From e77bcdd1f639809950c45234b08647ac6d3ffe7b Mon Sep 17 00:00:00 2001 From: Rakesh Babu Date: Wed, 27 Oct 2021 23:02:33 +0530 Subject: octeontx2-af: Display all enabled PF VF rsrc_alloc entries. Currently, we are using a fixed buffer size of length 2048 to display rsrc_alloc output. As a result a maximum of 2048 characters of rsrc_alloc output is displayed, which may lead sometimes to display only partial output. This patch fixes this dependency on max limit of buffer size and displays all PF VF entries. Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12 characters to print the list of LFs of each block for a PF/VF. If the length of list of LFs of a block exceeds this fixed width then the list gets truncated and displays only a part of the list. This patch fixes this by using the maximum possible length of list of LFs among all blocks of all PFs and VFs entries as the width size. Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.") Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status") Signed-off-by: Rakesh Babu Signed-off-by: Nithin Dabilpuram Signed-off-by: Sunil Kovvuri Goutham Signed-off-by: David S. Miller --- .../ethernet/marvell/octeontx2/af/rvu_debugfs.c | 138 ++++++++++++++++----- 1 file changed, 106 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index 6c589ca9b577..c7e12464c243 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -226,18 +226,85 @@ static const struct file_operations rvu_dbg_##name##_fops = { \ static void print_nix_qsize(struct seq_file *filp, struct rvu_pfvf *pfvf); +static void get_lf_str_list(struct rvu_block block, int pcifunc, + char *lfs) +{ + int lf = 0, seq = 0, len = 0, prev_lf = block.lf.max; + + for_each_set_bit(lf, block.lf.bmap, block.lf.max) { + if (lf >= block.lf.max) + break; + + if (block.fn_map[lf] != pcifunc) + continue; + + if (lf == prev_lf + 1) { + prev_lf = lf; + seq = 1; + continue; + } + + if (seq) + len += sprintf(lfs + len, "-%d,%d", prev_lf, lf); + else + len += (len ? sprintf(lfs + len, ",%d", lf) : + sprintf(lfs + len, "%d", lf)); + + prev_lf = lf; + seq = 0; + } + + if (seq) + len += sprintf(lfs + len, "-%d", prev_lf); + + lfs[len] = '\0'; +} + +static int get_max_column_width(struct rvu *rvu) +{ + int index, pf, vf, lf_str_size = 12, buf_size = 256; + struct rvu_block block; + u16 pcifunc; + char *buf; + + buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + for (pf = 0; pf < rvu->hw->total_pfs; pf++) { + for (vf = 0; vf <= rvu->hw->total_vfs; vf++) { + pcifunc = pf << 10 | vf; + if (!pcifunc) + continue; + + for (index = 0; index < BLK_COUNT; index++) { + block = rvu->hw->block[index]; + if (!strlen(block.name)) + continue; + + get_lf_str_list(block, pcifunc, buf); + if (lf_str_size <= strlen(buf)) + lf_str_size = strlen(buf) + 1; + } + } + } + + kfree(buf); + return lf_str_size; +} + /* Dumps current provisioning status of all RVU block LFs */ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, char __user *buffer, size_t count, loff_t *ppos) { - int index, off = 0, flag = 0, go_back = 0, len = 0; + int index, off = 0, flag = 0, len = 0, i = 0; struct rvu *rvu = filp->private_data; - int lf, pf, vf, pcifunc; + int bytes_not_copied = 0; struct rvu_block block; - int bytes_not_copied; - int lf_str_size = 12; + int pf, vf, pcifunc; int buf_size = 2048; + int lf_str_size; char *lfs; char *buf; @@ -249,6 +316,9 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, if (!buf) return -ENOSPC; + /* Get the maximum width of a column */ + lf_str_size = get_max_column_width(rvu); + lfs = kzalloc(lf_str_size, GFP_KERNEL); if (!lfs) { kfree(buf); @@ -262,65 +332,69 @@ static ssize_t rvu_dbg_rsrc_attach_status(struct file *filp, "%-*s", lf_str_size, rvu->hw->block[index].name); } + off += scnprintf(&buf[off], buf_size - 1 - off, "\n"); + bytes_not_copied = copy_to_user(buffer + (i * off), buf, off); + if (bytes_not_copied) + goto out; + + i++; + *ppos += off; for (pf = 0; pf < rvu->hw->total_pfs; pf++) { for (vf = 0; vf <= rvu->hw->total_vfs; vf++) { + off = 0; + flag = 0; pcifunc = pf << 10 | vf; if (!pcifunc) continue; if (vf) { sprintf(lfs, "PF%d:VF%d", pf, vf - 1); - go_back = scnprintf(&buf[off], - buf_size - 1 - off, - "%-*s", lf_str_size, lfs); + off = scnprintf(&buf[off], + buf_size - 1 - off, + "%-*s", lf_str_size, lfs); } else { sprintf(lfs, "PF%d", pf); - go_back = scnprintf(&buf[off], - buf_size - 1 - off, - "%-*s", lf_str_size, lfs); + off = scnprintf(&buf[off], + buf_size - 1 - off, + "%-*s", lf_str_size, lfs); } - off += go_back; - for (index = 0; index < BLKTYPE_MAX; index++) { + for (index = 0; index < BLK_COUNT; index++) { block = rvu->hw->block[index]; if (!strlen(block.name)) continue; len = 0; lfs[len] = '\0'; - for (lf = 0; lf < block.lf.max; lf++) { - if (block.fn_map[lf] != pcifunc) - continue; + get_lf_str_list(block, pcifunc, lfs); + if (strlen(lfs)) flag = 1; - len += sprintf(&lfs[len], "%d,", lf); - } - if (flag) - len--; - lfs[len] = '\0'; off += scnprintf(&buf[off], buf_size - 1 - off, "%-*s", lf_str_size, lfs); - if (!strlen(lfs)) - go_back += lf_str_size; } - if (!flag) - off -= go_back; - else - flag = 0; - off--; - off += scnprintf(&buf[off], buf_size - 1 - off, "\n"); + if (flag) { + off += scnprintf(&buf[off], + buf_size - 1 - off, "\n"); + bytes_not_copied = copy_to_user(buffer + + (i * off), + buf, off); + if (bytes_not_copied) + goto out; + + i++; + *ppos += off; + } } } - bytes_not_copied = copy_to_user(buffer, buf, off); +out: kfree(lfs); kfree(buf); - if (bytes_not_copied) return -EFAULT; - *ppos = off; - return off; + return *ppos; } RVU_DEBUG_FOPS(rsrc_status, rsrc_attach_status, NULL); -- cgit v1.2.3-70-g09d2 From c2d4c543f74c90f883e8ec62a31973ae8807d354 Mon Sep 17 00:00:00 2001 From: Rakesh Babu Saladi Date: Wed, 27 Oct 2021 23:02:34 +0530 Subject: octeontx2-af: Fix possible null pointer dereference. This patch fixes possible null pointer dereference in files "rvu_debugfs.c" and "rvu_nix.c" Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs") Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries") Signed-off-by: Rakesh Babu Saladi Signed-off-by: Subbaraya Sundeep Signed-off-by: Sunil Goutham Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c | 2 +- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 3 +++ 2 files changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c index c7e12464c243..49d822a98ada 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c @@ -578,7 +578,7 @@ static ssize_t rvu_dbg_qsize_write(struct file *filp, if (cmd_buf) ret = -EINVAL; - if (!strncmp(subtoken, "help", 4) || ret < 0) { + if (ret < 0 || !strncmp(subtoken, "help", 4)) { dev_info(rvu->dev, "Use echo <%s-lf > qsize\n", blk_string); goto qsize_write_done; } diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index 9ef4e942e31e..6970540dc470 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -2507,6 +2507,9 @@ static void nix_free_tx_vtag_entries(struct rvu *rvu, u16 pcifunc) return; nix_hw = get_nix_hw(rvu->hw, blkaddr); + if (!nix_hw) + return; + vlan = &nix_hw->txvlan; mutex_lock(&vlan->rsrc_lock); -- cgit v1.2.3-70-g09d2 From 35392da51b1ab7ba0c63de0a553e2a93c2314266 Mon Sep 17 00:00:00 2001 From: Guangbin Huang Date: Thu, 28 Oct 2021 22:06:24 +0800 Subject: Revert "net: hns3: fix pause config problem after autoneg disabled" This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c. According to discussion with Andrew as follow: https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/ HNS3 driver needs to separate pause autoneg from general autoneg, so revert this incorrect patch. Signed-off-by: Guangbin Huang Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 1 - drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 33 ++++++---------------- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 30 -------------------- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 1 - 5 files changed, 10 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index da3a593f6a56..d701451596c8 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -568,7 +568,6 @@ struct hnae3_ae_ops { u32 *auto_neg, u32 *rx_en, u32 *tx_en); int (*set_pauseparam)(struct hnae3_handle *handle, u32 auto_neg, u32 rx_en, u32 tx_en); - int (*restore_pauseparam)(struct hnae3_handle *handle); int (*set_autoneg)(struct hnae3_handle *handle, bool enable); int (*get_autoneg)(struct hnae3_handle *handle); diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c index 7d92dd273ed7..5ebd96f6833d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c @@ -824,26 +824,6 @@ static int hns3_check_ksettings_param(const struct net_device *netdev, return 0; } -static int hns3_set_phy_link_ksettings(struct net_device *netdev, - const struct ethtool_link_ksettings *cmd) -{ - struct hnae3_handle *handle = hns3_get_handle(netdev); - const struct hnae3_ae_ops *ops = handle->ae_algo->ops; - int ret; - - if (cmd->base.speed == SPEED_1000 && - cmd->base.autoneg == AUTONEG_DISABLE) - return -EINVAL; - - if (cmd->base.autoneg == AUTONEG_DISABLE && ops->restore_pauseparam) { - ret = ops->restore_pauseparam(handle); - if (ret) - return ret; - } - - return phy_ethtool_ksettings_set(netdev->phydev, cmd); -} - static int hns3_set_link_ksettings(struct net_device *netdev, const struct ethtool_link_ksettings *cmd) { @@ -862,11 +842,16 @@ static int hns3_set_link_ksettings(struct net_device *netdev, cmd->base.autoneg, cmd->base.speed, cmd->base.duplex); /* Only support ksettings_set for netdev with phy attached for now */ - if (netdev->phydev) - return hns3_set_phy_link_ksettings(netdev, cmd); - else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && - ops->set_phy_link_ksettings) + if (netdev->phydev) { + if (cmd->base.speed == SPEED_1000 && + cmd->base.autoneg == AUTONEG_DISABLE) + return -EINVAL; + + return phy_ethtool_ksettings_set(netdev->phydev, cmd); + } else if (test_bit(HNAE3_DEV_SUPPORT_PHY_IMP_B, ae_dev->caps) && + ops->set_phy_link_ksettings) { return ops->set_phy_link_ksettings(handle, cmd); + } if (ae_dev->dev_version < HNAE3_DEVICE_VERSION_V2) return -EOPNOTSUPP; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 269e579762b2..d891390d492f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -10998,35 +10998,6 @@ static int hclge_set_pauseparam(struct hnae3_handle *handle, u32 auto_neg, return -EOPNOTSUPP; } -static int hclge_restore_pauseparam(struct hnae3_handle *handle) -{ - struct hclge_vport *vport = hclge_get_vport(handle); - struct hclge_dev *hdev = vport->back; - u32 auto_neg, rx_pause, tx_pause; - int ret; - - hclge_get_pauseparam(handle, &auto_neg, &rx_pause, &tx_pause); - /* when autoneg is disabled, the pause setting of phy has no effect - * unless the link goes down. - */ - ret = phy_suspend(hdev->hw.mac.phydev); - if (ret) - return ret; - - phy_set_asym_pause(hdev->hw.mac.phydev, rx_pause, tx_pause); - - ret = phy_resume(hdev->hw.mac.phydev); - if (ret) - return ret; - - ret = hclge_mac_pause_setup_hw(hdev); - if (ret) - dev_err(&hdev->pdev->dev, - "restore pauseparam error, ret = %d.\n", ret); - - return ret; -} - static void hclge_get_ksettings_an_result(struct hnae3_handle *handle, u8 *auto_neg, u32 *speed, u8 *duplex) { @@ -12990,7 +12961,6 @@ static const struct hnae3_ae_ops hclge_ops = { .halt_autoneg = hclge_halt_autoneg, .get_pauseparam = hclge_get_pauseparam, .set_pauseparam = hclge_set_pauseparam, - .restore_pauseparam = hclge_restore_pauseparam, .set_mtu = hclge_set_mtu, .reset_queue = hclge_reset_tqp, .get_stats = hclge_get_stats, diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 124791e4bfee..95074e91a846 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -1435,7 +1435,7 @@ static int hclge_bp_setup_hw(struct hclge_dev *hdev, u8 tc) return 0; } -int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) +static int hclge_mac_pause_setup_hw(struct hclge_dev *hdev) { bool tx_en, rx_en; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h index 4b2c3a788980..2ee9b795f71d 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h @@ -244,7 +244,6 @@ int hclge_tm_get_pri_weight(struct hclge_dev *hdev, u8 pri_id, u8 *weight); int hclge_tm_get_pri_shaper(struct hclge_dev *hdev, u8 pri_id, enum hclge_opcode_type cmd, struct hclge_tm_shaper_para *para); -int hclge_mac_pause_setup_hw(struct hclge_dev *hdev); int hclge_tm_get_q_to_qs_map(struct hclge_dev *hdev, u16 q_id, u16 *qset_id); int hclge_tm_get_q_to_tc(struct hclge_dev *hdev, u16 q_id, u8 *tc_id); int hclge_tm_get_pg_to_pri_map(struct hclge_dev *hdev, u8 pg_id, -- cgit v1.2.3-70-g09d2