From c1602a1a0fbe12ab8e67deedf32e5a85f8553a07 Mon Sep 17 00:00:00 2001
From: Jaedon Shin <jaedon.shin@gmail.com>
Date: Thu, 26 Nov 2015 11:56:35 +0900
Subject: phy: phy_brcmstb_sata: add support for MIPS-based platforms
The BCM7xxx ARM-based and MIPS-based platforms share a similar hardware
block for AHCI SATA3.
This new compatible string, "brcm,bcm7425-sata-phy", may be used for
most MIPS-based platforms of 40nm process technology.
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/Kconfig | 4 ++--
drivers/phy/phy-brcmstb-sata.c | 24 ++++++++++++++++++------
2 files changed, 20 insertions(+), 8 deletions(-)
(limited to 'drivers')
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 90eec60d7ba5..e7e117d5dbbe 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -390,11 +390,11 @@ config PHY_TUSB1210
config PHY_BRCMSTB_SATA
tristate "Broadcom STB SATA PHY driver"
- depends on ARCH_BRCMSTB
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC
depends on OF
select GENERIC_PHY
help
- Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
+ Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
Likely useful only with CONFIG_SATA_BRCMSTB enabled.
config PHY_CYGNUS_PCIE
diff --git a/drivers/phy/phy-brcmstb-sata.c b/drivers/phy/phy-brcmstb-sata.c
index 555fb2de11d4..a23172ff40e3 100644
--- a/drivers/phy/phy-brcmstb-sata.c
+++ b/drivers/phy/phy-brcmstb-sata.c
@@ -32,8 +32,14 @@
/* Register offset between PHYs in PCB space */
#define SATA_MDIO_REG_28NM_SPACE_SIZE 0x1000
+/* The older SATA PHY registers duplicated per port registers within the map,
+ * rather than having a separate map per port.
+ */
+#define SATA_MDIO_REG_40NM_SPACE_SIZE 0x10
+
enum brcm_sata_phy_version {
BRCM_SATA_PHY_28NM,
+ BRCM_SATA_PHY_40NM,
};
struct brcm_sata_port {
@@ -51,7 +57,7 @@ struct brcm_sata_phy {
struct brcm_sata_port phys[MAX_PORTS];
};
-enum sata_mdio_phy_regs_28nm {
+enum sata_mdio_phy_regs {
PLL_REG_BANK_0 = 0x50,
PLL_REG_BANK_0_PLLCONTROL_0 = 0x81,
@@ -69,10 +75,14 @@ enum sata_mdio_phy_regs_28nm {
static inline void __iomem *brcm_sata_phy_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
- u32 offset;
+ u32 offset = 0;
if (priv->version == BRCM_SATA_PHY_28NM)
offset = SATA_MDIO_REG_28NM_SPACE_SIZE;
+ else if (priv->version == BRCM_SATA_PHY_40NM)
+ offset = SATA_MDIO_REG_40NM_SPACE_SIZE;
+ else
+ dev_err(priv->dev, "invalid phy version\n");
return priv->phy_base + (port->portnum * offset);
}
@@ -93,7 +103,7 @@ static void brcm_sata_mdio_wr(void __iomem *addr, u32 bank, u32 ofs,
#define FMAX_VAL_DEFAULT 0x3df
#define FMAX_VAL_SSC 0x83
-static void brcm_sata_cfg_ssc_28nm(struct brcm_sata_port *port)
+static void brcm_sata_cfg_ssc(struct brcm_sata_port *port)
{
void __iomem *base = brcm_sata_phy_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
@@ -124,12 +134,12 @@ static int brcm_sata_phy_init(struct phy *phy)
{
struct brcm_sata_port *port = phy_get_drvdata(phy);
- brcm_sata_cfg_ssc_28nm(port);
+ brcm_sata_cfg_ssc(port);
return 0;
}
-static const struct phy_ops phy_ops_28nm = {
+static const struct phy_ops phy_ops = {
.init = brcm_sata_phy_init,
.owner = THIS_MODULE,
};
@@ -137,6 +147,8 @@ static const struct phy_ops phy_ops_28nm = {
static const struct of_device_id brcm_sata_phy_of_match[] = {
{ .compatible = "brcm,bcm7445-sata-phy",
.data = (void *)BRCM_SATA_PHY_28NM },
+ { .compatible = "brcm,bcm7425-sata-phy",
+ .data = (void *)BRCM_SATA_PHY_40NM },
{},
};
MODULE_DEVICE_TABLE(of, brcm_sata_phy_of_match);
@@ -196,7 +208,7 @@ static int brcm_sata_phy_probe(struct platform_device *pdev)
port = &priv->phys[id];
port->portnum = id;
port->phy_priv = priv;
- port->phy = devm_phy_create(dev, child, &phy_ops_28nm);
+ port->phy = devm_phy_create(dev, child, &phy_ops);
port->ssc_en = of_property_read_bool(child, "brcm,enable-ssc");
if (IS_ERR(port->phy)) {
dev_err(dev, "failed to create PHY\n");
--
cgit v1.2.3-70-g09d2