From d4debbcbffa45c3de5df0040af2eea74a9e794a3 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 23 Feb 2024 20:14:37 +0200 Subject: mmc: omap: fix broken slot switch lookup The lookup is done before host->dev is initialized. It will always just fail silently, and the MMC behaviour is totally unpredictable as the switch is left in an undefined state. Fix that. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-4-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 9fb8995b43a1..aa40e1a9dc29 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1384,13 +1384,6 @@ static int mmc_omap_probe(struct platform_device *pdev) if (IS_ERR(host->virt_base)) return PTR_ERR(host->virt_base); - host->slot_switch = gpiod_get_optional(host->dev, "switch", - GPIOD_OUT_LOW); - if (IS_ERR(host->slot_switch)) - return dev_err_probe(host->dev, PTR_ERR(host->slot_switch), - "error looking up slot switch GPIO\n"); - - INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work); INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work); @@ -1409,6 +1402,12 @@ static int mmc_omap_probe(struct platform_device *pdev) host->dev = &pdev->dev; platform_set_drvdata(pdev, host); + host->slot_switch = gpiod_get_optional(host->dev, "switch", + GPIOD_OUT_LOW); + if (IS_ERR(host->slot_switch)) + return dev_err_probe(host->dev, PTR_ERR(host->slot_switch), + "error looking up slot switch GPIO\n"); + host->id = pdev->id; host->irq = irq; host->phys_base = res->start; -- cgit v1.3.1 From f6862c7f156d04f81c38467e1c304b7e9517e810 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 23 Feb 2024 20:14:38 +0200 Subject: mmc: omap: fix deferred probe After a deferred probe, GPIO descriptor lookup will fail with EBUSY. Fix by using managed descriptors. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-5-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index aa40e1a9dc29..50408771ae01 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1259,18 +1259,18 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id) slot->pdata = &host->pdata->slots[id]; /* Check for some optional GPIO controls */ - slot->vsd = gpiod_get_index_optional(host->dev, "vsd", - id, GPIOD_OUT_LOW); + slot->vsd = devm_gpiod_get_index_optional(host->dev, "vsd", + id, GPIOD_OUT_LOW); if (IS_ERR(slot->vsd)) return dev_err_probe(host->dev, PTR_ERR(slot->vsd), "error looking up VSD GPIO\n"); - slot->vio = gpiod_get_index_optional(host->dev, "vio", - id, GPIOD_OUT_LOW); + slot->vio = devm_gpiod_get_index_optional(host->dev, "vio", + id, GPIOD_OUT_LOW); if (IS_ERR(slot->vio)) return dev_err_probe(host->dev, PTR_ERR(slot->vio), "error looking up VIO GPIO\n"); - slot->cover = gpiod_get_index_optional(host->dev, "cover", - id, GPIOD_IN); + slot->cover = devm_gpiod_get_index_optional(host->dev, "cover", + id, GPIOD_IN); if (IS_ERR(slot->cover)) return dev_err_probe(host->dev, PTR_ERR(slot->cover), "error looking up cover switch GPIO\n"); @@ -1402,8 +1402,8 @@ static int mmc_omap_probe(struct platform_device *pdev) host->dev = &pdev->dev; platform_set_drvdata(pdev, host); - host->slot_switch = gpiod_get_optional(host->dev, "switch", - GPIOD_OUT_LOW); + host->slot_switch = devm_gpiod_get_optional(host->dev, "switch", + GPIOD_OUT_LOW); if (IS_ERR(host->slot_switch)) return dev_err_probe(host->dev, PTR_ERR(host->slot_switch), "error looking up slot switch GPIO\n"); -- cgit v1.3.1 From 894ad61b85d6ba8efd4274aa8719d9ff1c89ea54 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Fri, 23 Feb 2024 20:14:39 +0200 Subject: mmc: omap: restore original power up/down steps Commit e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") moved Nokia N810 MMC power up/down from the board file into the MMC driver. The change removed some delays, and ordering without a valid reason. Restore power up/down to match the original code. This matters only on N810 where the 2nd GPIO is in use. Other boards will see an additional delay but that should be a lesser concern than omitting delays altogether. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij Acked-by: Ulf Hansson Signed-off-by: Tony Lindgren --- drivers/mmc/host/omap.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 50408771ae01..13fa8588e38c 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1119,10 +1119,25 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on, host = slot->host; - if (slot->vsd) - gpiod_set_value(slot->vsd, power_on); - if (slot->vio) - gpiod_set_value(slot->vio, power_on); + if (power_on) { + if (slot->vsd) { + gpiod_set_value(slot->vsd, power_on); + msleep(1); + } + if (slot->vio) { + gpiod_set_value(slot->vio, power_on); + msleep(1); + } + } else { + if (slot->vio) { + gpiod_set_value(slot->vio, power_on); + msleep(50); + } + if (slot->vsd) { + gpiod_set_value(slot->vsd, power_on); + msleep(50); + } + } if (slot->pdata->set_power != NULL) slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on, -- cgit v1.3.1 From fcf3f7e2fc8a53a6140beee46ec782a4c88e4744 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Fri, 8 Mar 2024 17:37:26 +0800 Subject: raid1: fix use-after-free for original bio in raid1_write_request() r1_bio->bios[] is used to record new bios that will be issued to underlying disks, however, in raid1_write_request(), r1_bio->bios[] will set to the original bio temporarily. Meanwhile, if blocked rdev is set, free_r1bio() will be called causing that all r1_bio->bios[] to be freed: raid1_write_request() r1_bio = alloc_r1bio(mddev, bio); -> r1_bio->bios[] is NULL for (i = 0; i < disks; i++) -> for each rdev in conf // first rdev is normal r1_bio->bios[0] = bio; -> set to original bio // second rdev is blocked if (test_bit(Blocked, &rdev->flags)) break if (blocked_rdev) free_r1bio() put_all_bios() bio_put(r1_bio->bios[0]) -> original bio is freed Test scripts: mdadm -CR /dev/md0 -l1 -n4 /dev/sd[abcd] --assume-clean fio -filename=/dev/md0 -ioengine=libaio -rw=write -bs=4k -numjobs=1 \ -iodepth=128 -name=test -direct=1 echo blocked > /sys/block/md0/md/rd2/state Test result: BUG bio-264 (Not tainted): Object already free ----------------------------------------------------------------------------- Allocated in mempool_alloc_slab+0x24/0x50 age=1 cpu=1 pid=869 kmem_cache_alloc+0x324/0x480 mempool_alloc_slab+0x24/0x50 mempool_alloc+0x6e/0x220 bio_alloc_bioset+0x1af/0x4d0 blkdev_direct_IO+0x164/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 io_submit_one+0x5ca/0xb70 __do_sys_io_submit+0x86/0x270 __x64_sys_io_submit+0x22/0x30 do_syscall_64+0xb1/0x210 entry_SYSCALL_64_after_hwframe+0x6c/0x74 Freed in mempool_free_slab+0x1f/0x30 age=1 cpu=1 pid=869 kmem_cache_free+0x28c/0x550 mempool_free_slab+0x1f/0x30 mempool_free+0x40/0x100 bio_free+0x59/0x80 bio_put+0xf0/0x220 free_r1bio+0x74/0xb0 raid1_make_request+0xadf/0x1150 md_handle_request+0xc7/0x3b0 md_submit_bio+0x76/0x130 __submit_bio+0xd8/0x1d0 submit_bio_noacct_nocheck+0x1eb/0x5c0 submit_bio_noacct+0x169/0xd40 submit_bio+0xee/0x1d0 blkdev_direct_IO+0x322/0x8a0 blkdev_write_iter+0x309/0x440 aio_write+0x139/0x2f0 Since that bios for underlying disks are not allocated yet, fix this problem by using mempool_free() directly to free the r1_bio. Fixes: 992db13a4aee ("md/raid1: free the r1bio before waiting for blocked rdev") Cc: stable@vger.kernel.org # v6.6+ Reported-by: Coly Li Signed-off-by: Yu Kuai Tested-by: Coly Li Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20240308093726.1047420-1-yukuai1@huaweicloud.com --- drivers/md/raid1.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index be8ac24f50b6..7b8a71ca66dd 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1558,7 +1558,7 @@ static void raid1_write_request(struct mddev *mddev, struct bio *bio, for (j = 0; j < i; j++) if (r1_bio->bios[j]) rdev_dec_pending(conf->mirrors[j].rdev, mddev); - free_r1bio(r1_bio); + mempool_free(r1_bio, &conf->r1bio_pool); allow_barrier(conf, bio->bi_iter.bi_sector); if (bio->bi_opf & REQ_NOWAIT) { -- cgit v1.3.1 From 59097a2a5ecadb0f025232c665fd11c8ae1e1f58 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Sat, 2 Mar 2024 03:22:49 +0100 Subject: interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM Booting the kernel on X1E results in a message like: [ 2.561524] qnoc-x1e80100 interconnect-0: ACV_PERF could not find RPMh address And indeed, taking a look at cmd-db, no such BCM exists. Remove it. Fixes: 9f196772841e ("interconnect: qcom: Add X1E80100 interconnect provider driver") Signed-off-by: Konrad Dybcio Reviewed-by: Mike Tipton Link: https://lore.kernel.org/r/20240302-topic-faux_bcm_x1e-v1-1-c40fab7c4bc5@linaro.org Signed-off-by: Georgi Djakov --- drivers/interconnect/qcom/x1e80100.c | 26 -------------------------- 1 file changed, 26 deletions(-) (limited to 'drivers') diff --git a/drivers/interconnect/qcom/x1e80100.c b/drivers/interconnect/qcom/x1e80100.c index cbaf4f9c41be..06f0a6d6cbbc 100644 --- a/drivers/interconnect/qcom/x1e80100.c +++ b/drivers/interconnect/qcom/x1e80100.c @@ -116,15 +116,6 @@ static struct qcom_icc_node xm_sdc2 = { .links = { X1E80100_SLAVE_A2NOC_SNOC }, }; -static struct qcom_icc_node ddr_perf_mode_master = { - .name = "ddr_perf_mode_master", - .id = X1E80100_MASTER_DDR_PERF_MODE, - .channels = 1, - .buswidth = 4, - .num_links = 1, - .links = { X1E80100_SLAVE_DDR_PERF_MODE }, -}; - static struct qcom_icc_node qup0_core_master = { .name = "qup0_core_master", .id = X1E80100_MASTER_QUP_CORE_0, @@ -832,14 +823,6 @@ static struct qcom_icc_node qns_a2noc_snoc = { .links = { X1E80100_MASTER_A2NOC_SNOC }, }; -static struct qcom_icc_node ddr_perf_mode_slave = { - .name = "ddr_perf_mode_slave", - .id = X1E80100_SLAVE_DDR_PERF_MODE, - .channels = 1, - .buswidth = 4, - .num_links = 0, -}; - static struct qcom_icc_node qup0_core_slave = { .name = "qup0_core_slave", .id = X1E80100_SLAVE_QUP_CORE_0, @@ -1591,12 +1574,6 @@ static struct qcom_icc_bcm bcm_acv = { .nodes = { &ebi }, }; -static struct qcom_icc_bcm bcm_acv_perf = { - .name = "ACV_PERF", - .num_nodes = 1, - .nodes = { &ddr_perf_mode_slave }, -}; - static struct qcom_icc_bcm bcm_ce0 = { .name = "CE0", .num_nodes = 1, @@ -1863,18 +1840,15 @@ static const struct qcom_icc_desc x1e80100_aggre2_noc = { }; static struct qcom_icc_bcm * const clk_virt_bcms[] = { - &bcm_acv_perf, &bcm_qup0, &bcm_qup1, &bcm_qup2, }; static struct qcom_icc_node * const clk_virt_nodes[] = { - [MASTER_DDR_PERF_MODE] = &ddr_perf_mode_master, [MASTER_QUP_CORE_0] = &qup0_core_master, [MASTER_QUP_CORE_1] = &qup1_core_master, [MASTER_QUP_CORE_2] = &qup2_core_master, - [SLAVE_DDR_PERF_MODE] = &ddr_perf_mode_slave, [SLAVE_QUP_CORE_0] = &qup0_core_slave, [SLAVE_QUP_CORE_1] = &qup1_core_slave, [SLAVE_QUP_CORE_2] = &qup2_core_slave, -- cgit v1.3.1 From de1bf25b6d771abdb52d43546cf57ad775fb68a1 Mon Sep 17 00:00:00 2001 From: Mike Tipton Date: Tue, 5 Mar 2024 14:56:52 -0800 Subject: interconnect: Don't access req_list while it's being manipulated The icc_lock mutex was split into separate icc_lock and icc_bw_lock mutexes in [1] to avoid lockdep splats. However, this didn't adequately protect access to icc_node::req_list. The icc_set_bw() function will eventually iterate over req_list while only holding icc_bw_lock, but req_list can be modified while only holding icc_lock. This causes races between icc_set_bw(), of_icc_get(), and icc_put(). Example A: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); icc_put(path_b) mutex_lock(&icc_lock); aggregate_requests() hlist_for_each_entry(r, ... hlist_del(... Example B: CPU0 CPU1 ---- ---- icc_set_bw(path_a) mutex_lock(&icc_bw_lock); path_b = of_icc_get() of_icc_get_by_index() mutex_lock(&icc_lock); path_find() path_init() aggregate_requests() hlist_for_each_entry(r, ... hlist_add_head(... Fix this by ensuring icc_bw_lock is always held before manipulating icc_node::req_list. The additional places icc_bw_lock is held don't perform any memory allocations, so we should still be safe from the original lockdep splats that motivated the separate locks. [1] commit af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") Signed-off-by: Mike Tipton Fixes: af42269c3523 ("interconnect: Fix locking for runpm vs reclaim") Reviewed-by: Rob Clark Link: https://lore.kernel.org/r/20240305225652.22872-1-quic_mdtipton@quicinc.com Signed-off-by: Georgi Djakov --- drivers/interconnect/core.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c index 50bac2d79d9b..68edb07d4443 100644 --- a/drivers/interconnect/core.c +++ b/drivers/interconnect/core.c @@ -176,6 +176,8 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst, path->num_nodes = num_nodes; + mutex_lock(&icc_bw_lock); + for (i = num_nodes - 1; i >= 0; i--) { node->provider->users++; hlist_add_head(&path->reqs[i].req_node, &node->req_list); @@ -186,6 +188,8 @@ static struct icc_path *path_init(struct device *dev, struct icc_node *dst, node = node->reverse; } + mutex_unlock(&icc_bw_lock); + return path; } @@ -792,12 +796,16 @@ void icc_put(struct icc_path *path) pr_err("%s: error (%d)\n", __func__, ret); mutex_lock(&icc_lock); + mutex_lock(&icc_bw_lock); + for (i = 0; i < path->num_nodes; i++) { node = path->reqs[i].node; hlist_del(&path->reqs[i].req_node); if (!WARN_ON(!node->provider->users)) node->provider->users--; } + + mutex_unlock(&icc_bw_lock); mutex_unlock(&icc_lock); kfree_const(path->name); -- cgit v1.3.1 From 1a4bd2b128fb5ca62e4d1c5ca298d3d06b9c1e8e Mon Sep 17 00:00:00 2001 From: Jens Wiklander Date: Mon, 11 Mar 2024 12:07:00 +0100 Subject: firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get() FFA_NOTIFICATION_INFO_GET retrieves information about pending notifications. Notifications can be either global or per VCPU. Global notifications are reported with the partition ID only in the list of endpoints with pending notifications. ffa_notification_info_get() incorrectly expect no ID at all for global notifications. Fix this by checking for ID = 1 instead of ID = 0. Fixes: 3522be48d82b ("firmware: arm_ffa: Implement the NOTIFICATION_INFO_GET interface") Signed-off-by: Jens Wiklander Reviewed-by: Lorenzo Pieralisi Link: https://lore.kernel.org/r/20240311110700.2367142-1-jens.wiklander@linaro.org Signed-off-by: Sudeep Holla --- drivers/firmware/arm_ffa/driver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_ffa/driver.c b/drivers/firmware/arm_ffa/driver.c index f2556a8e9401..9bc2e10381af 100644 --- a/drivers/firmware/arm_ffa/driver.c +++ b/drivers/firmware/arm_ffa/driver.c @@ -790,7 +790,7 @@ static void ffa_notification_info_get(void) part_id = packed_id_list[ids_processed++]; - if (!ids_count[list]) { /* Global Notification */ + if (ids_count[list] == 1) { /* Global Notification */ __do_sched_recv_cb(part_id, 0, false); continue; } -- cgit v1.3.1 From 17f243adf1653bdbaeec767e3e74c9ad089f470b Mon Sep 17 00:00:00 2001 From: Pierre Gondois Date: Mon, 11 Mar 2024 10:04:12 +0100 Subject: firmware: arm_scmi: Fix wrong fastchannel initialization Fastchannels are initialized with an incorrect index(POWERCAP_PAI_GET) in: commit 2441caa84aac ("firmware: arm_scmi: Populate fast channel rate_limit") Fix this and provide a correct index(POWERCAP_FC_PAI) Fixes: 2441caa84aac ("firmware: arm_scmi: Populate fast channel rate_limit") Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202403100744.7Op3PI8L-lkp@intel.com/ Signed-off-by: Pierre Gondois Link: https://lore.kernel.org/r/20240311090413.1710725-1-pierre.gondois@arm.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/powercap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/powercap.c b/drivers/firmware/arm_scmi/powercap.c index ea9201e7044c..1fa79bba492e 100644 --- a/drivers/firmware/arm_scmi/powercap.c +++ b/drivers/firmware/arm_scmi/powercap.c @@ -736,7 +736,7 @@ static void scmi_powercap_domain_init_fc(const struct scmi_protocol_handle *ph, ph->hops->fastchannel_init(ph, POWERCAP_DESCRIBE_FASTCHANNEL, POWERCAP_PAI_GET, 4, domain, &fc[POWERCAP_FC_PAI].get_addr, NULL, - &fc[POWERCAP_PAI_GET].rate_limit); + &fc[POWERCAP_FC_PAI].rate_limit); *p_fc = fc; } -- cgit v1.3.1 From b70c7996d4ffb2e02895132e8a79a37cee66504f Mon Sep 17 00:00:00 2001 From: Cristian Marussi Date: Fri, 15 Mar 2024 14:03:24 +0000 Subject: firmware: arm_scmi: Make raw debugfs entries non-seekable SCMI raw debugfs entries are used to inject and snoop messages out of the SCMI core and, as such, the underlying virtual files have no reason to support seeking. Modify the related file_operations descriptors to be non-seekable. Fixes: 3c3d818a9317 ("firmware: arm_scmi: Add core raw transmission support") Signed-off-by: Cristian Marussi Link: https://lore.kernel.org/r/20240315140324.231830-1-cristian.marussi@arm.com Signed-off-by: Sudeep Holla --- drivers/firmware/arm_scmi/raw_mode.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/firmware/arm_scmi/raw_mode.c b/drivers/firmware/arm_scmi/raw_mode.c index 350573518503..130d13e9cd6b 100644 --- a/drivers/firmware/arm_scmi/raw_mode.c +++ b/drivers/firmware/arm_scmi/raw_mode.c @@ -921,7 +921,7 @@ static int scmi_dbg_raw_mode_open(struct inode *inode, struct file *filp) rd->raw = raw; filp->private_data = rd; - return 0; + return nonseekable_open(inode, filp); } static int scmi_dbg_raw_mode_release(struct inode *inode, struct file *filp) @@ -950,6 +950,7 @@ static const struct file_operations scmi_dbg_raw_mode_reset_fops = { .open = scmi_dbg_raw_mode_open, .release = scmi_dbg_raw_mode_release, .write = scmi_dbg_raw_mode_reset_write, + .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -959,6 +960,7 @@ static const struct file_operations scmi_dbg_raw_mode_message_fops = { .read = scmi_dbg_raw_mode_message_read, .write = scmi_dbg_raw_mode_message_write, .poll = scmi_dbg_raw_mode_message_poll, + .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -975,6 +977,7 @@ static const struct file_operations scmi_dbg_raw_mode_message_async_fops = { .read = scmi_dbg_raw_mode_message_read, .write = scmi_dbg_raw_mode_message_async_write, .poll = scmi_dbg_raw_mode_message_poll, + .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -998,6 +1001,7 @@ static const struct file_operations scmi_dbg_raw_mode_notification_fops = { .release = scmi_dbg_raw_mode_release, .read = scmi_test_dbg_raw_mode_notif_read, .poll = scmi_test_dbg_raw_mode_notif_poll, + .llseek = no_llseek, .owner = THIS_MODULE, }; @@ -1021,6 +1025,7 @@ static const struct file_operations scmi_dbg_raw_mode_errors_fops = { .release = scmi_dbg_raw_mode_release, .read = scmi_test_dbg_raw_mode_errors_read, .poll = scmi_test_dbg_raw_mode_errors_poll, + .llseek = no_llseek, .owner = THIS_MODULE, }; -- cgit v1.3.1 From 502892bbd2021fbe20f0d702b6b0bae281a742fa Mon Sep 17 00:00:00 2001 From: Irui Wang Date: Wed, 6 Mar 2024 10:12:23 +0800 Subject: media: mediatek: vcodec: Handle VP9 superframe bitstream with 8 sub-frames The VP9 bitstream uses superframes, which each contain 8 sub-frames, enable accessing the last superframe by increasing the range of the index vaidation as the maximum number of superframes is 8 and not 7, so that the last sub-frame can be decoded normally with the stateful VP9 decoder. Signed-off-by: Irui Wang Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- .../media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_if.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_if.c index 55355fa70090..039082f600c8 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_if.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_if.c @@ -16,6 +16,7 @@ #include "../vdec_drv_base.h" #include "../vdec_vpu_if.h" +#define VP9_MAX_SUPER_FRAMES_NUM 8 #define VP9_SUPER_FRAME_BS_SZ 64 #define MAX_VP9_DPB_SIZE 9 @@ -133,11 +134,11 @@ struct vp9_sf_ref_fb { */ struct vdec_vp9_vsi { unsigned char sf_bs_buf[VP9_SUPER_FRAME_BS_SZ]; - struct vp9_sf_ref_fb sf_ref_fb[VP9_MAX_FRM_BUF_NUM-1]; + struct vp9_sf_ref_fb sf_ref_fb[VP9_MAX_SUPER_FRAMES_NUM]; int sf_next_ref_fb_idx; unsigned int sf_frm_cnt; - unsigned int sf_frm_offset[VP9_MAX_FRM_BUF_NUM-1]; - unsigned int sf_frm_sz[VP9_MAX_FRM_BUF_NUM-1]; + unsigned int sf_frm_offset[VP9_MAX_SUPER_FRAMES_NUM]; + unsigned int sf_frm_sz[VP9_MAX_SUPER_FRAMES_NUM]; unsigned int sf_frm_idx; unsigned int sf_init; struct vdec_fb fb; @@ -526,7 +527,7 @@ static void vp9_swap_frm_bufs(struct vdec_vp9_inst *inst) /* if this super frame and it is not last sub-frame, get next fb for * sub-frame decode */ - if (vsi->sf_frm_cnt > 0 && vsi->sf_frm_idx != vsi->sf_frm_cnt - 1) + if (vsi->sf_frm_cnt > 0 && vsi->sf_frm_idx != vsi->sf_frm_cnt) vsi->sf_next_ref_fb_idx = vp9_get_sf_ref_fb(inst); } @@ -735,7 +736,7 @@ static void get_free_fb(struct vdec_vp9_inst *inst, struct vdec_fb **out_fb) static int validate_vsi_array_indexes(struct vdec_vp9_inst *inst, struct vdec_vp9_vsi *vsi) { - if (vsi->sf_frm_idx >= VP9_MAX_FRM_BUF_NUM - 1) { + if (vsi->sf_frm_idx > VP9_MAX_SUPER_FRAMES_NUM) { mtk_vdec_err(inst->ctx, "Invalid vsi->sf_frm_idx=%u.", vsi->sf_frm_idx); return -EIO; } -- cgit v1.3.1 From 97c75ee5de060d271d80109b0c47cb6008439e5b Mon Sep 17 00:00:00 2001 From: Nicolas Dufresne Date: Mon, 26 Feb 2024 16:19:52 -0500 Subject: media: mediatek: vcodec: Fix oops when HEVC init fails The stateless HEVC decoder saves the instance pointer in the context regardless if the initialization worked or not. This caused a use after free, when the pointer is freed in case of a failure in the deinit function. Only store the instance pointer when the initialization was successful, to solve this issue. Hardware name: Acer Tomato (rev3 - 4) board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] lr : vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] sp : ffff80008750bc20 x29: ffff80008750bc20 x28: ffff1299f6d70000 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: ffff80008750bc98 x22: 000000000000a003 x21: ffffd45c4cfae000 x20: 0000000000000010 x19: ffff1299fd668310 x18: 000000000000001a x17: 000000040044ffff x16: ffffd45cb15dc648 x15: 0000000000000000 x14: ffff1299c08da1c0 x13: ffffd45cb1f87a10 x12: ffffd45cb2f5fe80 x11: 0000000000000001 x10: 0000000000001b30 x9 : ffffd45c4d12b488 x8 : 1fffe25339380d81 x7 : 0000000000000001 x6 : ffff1299c9c06c00 x5 : 0000000000000132 x4 : 0000000000000000 x3 : 0000000000000000 x2 : 0000000000000010 x1 : ffff80008750bc98 x0 : 0000000000000000 Call trace: vcodec_vpu_send_msg+0x4c/0x190 [mtk_vcodec_dec] vcodec_send_ap_ipi+0x78/0x170 [mtk_vcodec_dec] vpu_dec_deinit+0x1c/0x30 [mtk_vcodec_dec] vdec_hevc_slice_deinit+0x30/0x98 [mtk_vcodec_dec] vdec_if_deinit+0x38/0x68 [mtk_vcodec_dec] mtk_vcodec_dec_release+0x20/0x40 [mtk_vcodec_dec] fops_vcodec_release+0x64/0x118 [mtk_vcodec_dec] v4l2_release+0x7c/0x100 __fput+0x80/0x2d8 __fput_sync+0x58/0x70 __arm64_sys_close+0x40/0x90 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0xd8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x1a8/0x1b0 Code: d503201f f9401660 b900127f b900227f (f9400400) Signed-off-by: Nicolas Dufresne Fixes: 2674486aac7d ("media: mediatek: vcodec: support stateless hevc decoder") Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- .../platform/mediatek/vcodec/decoder/vdec/vdec_hevc_req_multi_if.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_hevc_req_multi_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_hevc_req_multi_if.c index 06ed47df693b..21836dd6ef85 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_hevc_req_multi_if.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_hevc_req_multi_if.c @@ -869,7 +869,6 @@ static int vdec_hevc_slice_init(struct mtk_vcodec_dec_ctx *ctx) inst->vpu.codec_type = ctx->current_codec; inst->vpu.capture_type = ctx->capture_fourcc; - ctx->drv_handle = inst; err = vpu_dec_init(&inst->vpu); if (err) { mtk_vdec_err(ctx, "vdec_hevc init err=%d", err); @@ -898,6 +897,7 @@ static int vdec_hevc_slice_init(struct mtk_vcodec_dec_ctx *ctx) mtk_vdec_debug(ctx, "lat hevc instance >> %p, codec_type = 0x%x", inst, inst->vpu.codec_type); + ctx->drv_handle = inst; return 0; error_free_inst: kfree(inst); -- cgit v1.3.1 From 6467cda18c9f9b5f2f9a0aa1e2861c653e41f382 Mon Sep 17 00:00:00 2001 From: Yunfei Dong Date: Thu, 14 Mar 2024 20:30:08 +0800 Subject: media: mediatek: vcodec: adding lock to protect decoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_dec_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block. Hardware name: Google juniper sku16 board (DT) pstate: 20400005 (nzCv daif +PAN -UAO -TCO BTYPE=--) pc : vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec] lr : scp_ipi_handler+0xd0/0x194 [mtk_scp] sp : ffffffc0131dbbd0 x29: ffffffc0131dbbd0 x28: 0000000000000000 x27: ffffff9bb277f348 x26: ffffff9bb242ad00 x25: ffffffd2d440d3b8 x24: ffffffd2a13ff1d4 x23: ffffff9bb7fe85a0 x22: ffffffc0133fbdb0 x21: 0000000000000010 x20: ffffff9b050ea328 x19: ffffffc0131dbc08 x18: 0000000000001000 x17: 0000000000000000 x16: ffffffd2d461c6e0 x15: 0000000000000242 x14: 000000000000018f x13: 000000000000004d x12: 0000000000000000 x11: 0000000000000001 x10: fffffffffffffff0 x9 : ffffff9bb6e793a8 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : fffffffffffffff0 x3 : 0000000000000020 x2 : ffffff9bb6e79080 x1 : 0000000000000010 x0 : ffffffc0131dbc08 Call trace: vpu_dec_ipi_handler+0x58/0x1f8 [mtk_vcodec_dec (HASH:6c3f 2)] scp_ipi_handler+0xd0/0x194 [mtk_scp (HASH:7046 3)] mt8183_scp_irq_handler+0x44/0x88 [mtk_scp (HASH:7046 3)] scp_irq_handler+0x48/0x90 [mtk_scp (HASH:7046 3)] irq_thread_fn+0x38/0x94 irq_thread+0x100/0x1c0 kthread+0x140/0x1fc ret_from_fork+0x10/0x30 Code: 54000088 f94ca50a eb14015f 54000060 (f9400108) ---[ end trace ace43ce36cbd5c93 ]--- Kernel panic - not syncing: Oops: Fatal exception SMP: stopping secondary CPUs Kernel Offset: 0x12c4000000 from 0xffffffc010000000 PHYS_OFFSET: 0xffffffe580000000 CPU features: 0x08240002,2188200c Memory Limit: none Fixes: 655b86e52eac ("media: mediatek: vcodec: Fix possible invalid memory access for decoder") Signed-off-by: Yunfei Dong Reviewed-by: Nicolas Dufresne Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c | 4 ++-- drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.c | 5 +++++ drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.h | 2 ++ drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c | 2 ++ 4 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c index 4c34344dc7dc..62cafe25fed9 100644 --- a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c +++ b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c @@ -50,12 +50,12 @@ static void mtk_vcodec_vpu_reset_dec_handler(void *priv) dev_err(&dev->plat_dev->dev, "Watchdog timeout!!"); - mutex_lock(&dev->dev_mutex); + mutex_lock(&dev->dev_ctx_lock); list_for_each_entry(ctx, &dev->ctx_list, list) { ctx->state = MTK_STATE_ABORT; mtk_v4l2_vdec_dbg(0, ctx, "[%d] Change to state MTK_STATE_ABORT", ctx->id); } - mutex_unlock(&dev->dev_mutex); + mutex_unlock(&dev->dev_ctx_lock); } static void mtk_vcodec_vpu_reset_enc_handler(void *priv) diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.c index f47c98faf068..2073781ccadb 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.c @@ -268,7 +268,9 @@ static int fops_vcodec_open(struct file *file) ctx->dev->vdec_pdata->init_vdec_params(ctx); + mutex_lock(&dev->dev_ctx_lock); list_add(&ctx->list, &dev->ctx_list); + mutex_unlock(&dev->dev_ctx_lock); mtk_vcodec_dbgfs_create(ctx); mutex_unlock(&dev->dev_mutex); @@ -311,7 +313,9 @@ static int fops_vcodec_release(struct file *file) v4l2_ctrl_handler_free(&ctx->ctrl_hdl); mtk_vcodec_dbgfs_remove(dev, ctx->id); + mutex_lock(&dev->dev_ctx_lock); list_del_init(&ctx->list); + mutex_unlock(&dev->dev_ctx_lock); kfree(ctx); mutex_unlock(&dev->dev_mutex); return 0; @@ -404,6 +408,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev) for (i = 0; i < MTK_VDEC_HW_MAX; i++) mutex_init(&dev->dec_mutex[i]); mutex_init(&dev->dev_mutex); + mutex_init(&dev->dev_ctx_lock); spin_lock_init(&dev->irqlock); snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s", diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.h b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.h index 849b89dd205c..85b2c0d3d8bc 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.h +++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_drv.h @@ -241,6 +241,7 @@ struct mtk_vcodec_dec_ctx { * * @dec_mutex: decoder hardware lock * @dev_mutex: video_device lock + * @dev_ctx_lock: the lock of context list * @decode_workqueue: decode work queue * * @irqlock: protect data access by irq handler and work thread @@ -282,6 +283,7 @@ struct mtk_vcodec_dec_dev { /* decoder hardware mutex lock */ struct mutex dec_mutex[MTK_VDEC_HW_MAX]; struct mutex dev_mutex; + struct mutex dev_ctx_lock; struct workqueue_struct *decode_workqueue; spinlock_t irqlock; diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c index 82e57ae983d5..da6be556727b 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec_vpu_if.c @@ -77,12 +77,14 @@ static bool vpu_dec_check_ap_inst(struct mtk_vcodec_dec_dev *dec_dev, struct vde struct mtk_vcodec_dec_ctx *ctx; int ret = false; + mutex_lock(&dec_dev->dev_ctx_lock); list_for_each_entry(ctx, &dec_dev->ctx_list, list) { if (!IS_ERR_OR_NULL(ctx) && ctx->vpu_inst == vpu) { ret = true; break; } } + mutex_unlock(&dec_dev->dev_ctx_lock); return ret; } -- cgit v1.3.1 From afaaf3a0f647a24a7bf6a2145d8ade37baaf75ad Mon Sep 17 00:00:00 2001 From: Yunfei Dong Date: Thu, 14 Mar 2024 20:30:09 +0800 Subject: media: mediatek: vcodec: adding lock to protect encoder context list Add a lock for the ctx_list, to avoid accessing a NULL pointer within the 'vpu_enc_ipi_handler' function when the ctx_list has been deleted due to an unexpected behavior on the SCP IP block. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Yunfei Dong Reviewed-by: Nicolas Dufresne Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c | 4 ++-- drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c | 5 +++++ drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h | 2 ++ drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c | 2 ++ 4 files changed, 11 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c index 62cafe25fed9..d7027d600208 100644 --- a/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c +++ b/drivers/media/platform/mediatek/vcodec/common/mtk_vcodec_fw_vpu.c @@ -65,12 +65,12 @@ static void mtk_vcodec_vpu_reset_enc_handler(void *priv) dev_err(&dev->plat_dev->dev, "Watchdog timeout!!"); - mutex_lock(&dev->dev_mutex); + mutex_lock(&dev->dev_ctx_lock); list_for_each_entry(ctx, &dev->ctx_list, list) { ctx->state = MTK_STATE_ABORT; mtk_v4l2_vdec_dbg(0, ctx, "[%d] Change to state MTK_STATE_ABORT", ctx->id); } - mutex_unlock(&dev->dev_mutex); + mutex_unlock(&dev->dev_ctx_lock); } static const struct mtk_vcodec_fw_ops mtk_vcodec_vpu_msg = { diff --git a/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c b/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c index 6319f24bc714..3cb8a1622222 100644 --- a/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c +++ b/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.c @@ -177,7 +177,9 @@ static int fops_vcodec_open(struct file *file) mtk_v4l2_venc_dbg(2, ctx, "Create instance [%d]@%p m2m_ctx=%p ", ctx->id, ctx, ctx->m2m_ctx); + mutex_lock(&dev->dev_ctx_lock); list_add(&ctx->list, &dev->ctx_list); + mutex_unlock(&dev->dev_ctx_lock); mutex_unlock(&dev->dev_mutex); mtk_v4l2_venc_dbg(0, ctx, "%s encoder [%d]", dev_name(&dev->plat_dev->dev), @@ -212,7 +214,9 @@ static int fops_vcodec_release(struct file *file) v4l2_fh_exit(&ctx->fh); v4l2_ctrl_handler_free(&ctx->ctrl_hdl); + mutex_lock(&dev->dev_ctx_lock); list_del_init(&ctx->list); + mutex_unlock(&dev->dev_ctx_lock); kfree(ctx); mutex_unlock(&dev->dev_mutex); return 0; @@ -294,6 +298,7 @@ static int mtk_vcodec_probe(struct platform_device *pdev) mutex_init(&dev->enc_mutex); mutex_init(&dev->dev_mutex); + mutex_init(&dev->dev_ctx_lock); spin_lock_init(&dev->irqlock); snprintf(dev->v4l2_dev.name, sizeof(dev->v4l2_dev.name), "%s", diff --git a/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h b/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h index a042f607ed8d..0bd85d0fb379 100644 --- a/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h +++ b/drivers/media/platform/mediatek/vcodec/encoder/mtk_vcodec_enc_drv.h @@ -178,6 +178,7 @@ struct mtk_vcodec_enc_ctx { * * @enc_mutex: encoder hardware lock. * @dev_mutex: video_device lock + * @dev_ctx_lock: the lock of context list * @encode_workqueue: encode work queue * * @enc_irq: h264 encoder irq resource @@ -205,6 +206,7 @@ struct mtk_vcodec_enc_dev { /* encoder hardware mutex lock */ struct mutex enc_mutex; struct mutex dev_mutex; + struct mutex dev_ctx_lock; struct workqueue_struct *encode_workqueue; int enc_irq; diff --git a/drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c b/drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c index 84ad1cc6ad17..51bb7ee141b9 100644 --- a/drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c +++ b/drivers/media/platform/mediatek/vcodec/encoder/venc_vpu_if.c @@ -47,12 +47,14 @@ static bool vpu_enc_check_ap_inst(struct mtk_vcodec_enc_dev *enc_dev, struct ven struct mtk_vcodec_enc_ctx *ctx; int ret = false; + mutex_lock(&enc_dev->dev_ctx_lock); list_for_each_entry(ctx, &enc_dev->ctx_list, list) { if (!IS_ERR_OR_NULL(ctx) && ctx->vpu_inst == vpu) { ret = true; break; } } + mutex_unlock(&enc_dev->dev_ctx_lock); return ret; } -- cgit v1.3.1 From d353c3c34af08cfd4eaafc8c55f664eacec274ee Mon Sep 17 00:00:00 2001 From: Yunfei Dong Date: Wed, 6 Mar 2024 20:19:02 +0800 Subject: media: mediatek: vcodec: support 36 bits physical address The physical address on the MT8188 platform is larger than 32 bits, change the type from unsigned int to dma_addr_t to be able to access the high bits of the address. Signed-off-by: Yunfei Dong Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Sebastian Fricke Signed-off-by: Hans Verkuil --- drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_if.c | 2 +- .../media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_if.c index 19407f9bc773..987b3d71b662 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_if.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp8_if.c @@ -449,7 +449,7 @@ static int vdec_vp8_decode(void *h_vdec, struct mtk_vcodec_mem *bs, inst->frm_cnt, y_fb_dma, c_fb_dma, fb); inst->cur_fb = fb; - dec->bs_dma = (unsigned long)bs->dma_addr; + dec->bs_dma = (uint64_t)bs->dma_addr; dec->bs_sz = bs->size; dec->cur_y_fb_dma = y_fb_dma; dec->cur_c_fb_dma = c_fb_dma; diff --git a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c index cf48d09b78d7..eea709d93820 100644 --- a/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c +++ b/drivers/media/platform/mediatek/vcodec/decoder/vdec/vdec_vp9_req_lat_if.c @@ -1074,7 +1074,7 @@ static int vdec_vp9_slice_setup_tile_buffer(struct vdec_vp9_slice_instance *inst unsigned int mi_row; unsigned int mi_col; unsigned int offset; - unsigned int pa; + dma_addr_t pa; unsigned int size; struct vdec_vp9_slice_tiles *tiles; unsigned char *pos; @@ -1109,7 +1109,7 @@ static int vdec_vp9_slice_setup_tile_buffer(struct vdec_vp9_slice_instance *inst pos = va + offset; end = va + bs->size; /* truncated */ - pa = (unsigned int)bs->dma_addr + offset; + pa = bs->dma_addr + offset; tb = instance->tile.va; for (i = 0; i < rows; i++) { for (j = 0; j < cols; j++) { -- cgit v1.3.1 From b7c59b038c656214f56432867056997c2e0fc268 Mon Sep 17 00:00:00 2001 From: Yuquan Wang Date: Mon, 18 Mar 2024 10:29:28 +0800 Subject: cxl/mem: Fix for the index of Clear Event Record Handle The dev_dbg info for Clear Event Records mailbox command would report the handle of the next record to clear not the current one. This was because the index 'i' had incremented before printing the current handle value. Fixes: 6ebe28f9ec72 ("cxl/mem: Read, trace, and clear events on driver load") Signed-off-by: Yuquan Wang Reviewed-by: Jonathan Cameron Reviewed-by: Dan Williams Reviewed-by: Fan Ni Signed-off-by: Dave Jiang --- drivers/cxl/core/mbox.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c index 9adda4795eb7..50146161887d 100644 --- a/drivers/cxl/core/mbox.c +++ b/drivers/cxl/core/mbox.c @@ -915,7 +915,7 @@ static int cxl_clear_event_record(struct cxl_memdev_state *mds, payload->handles[i++] = gen->hdr.handle; dev_dbg(mds->cxlds.dev, "Event log '%d': Clearing %u\n", log, - le16_to_cpu(payload->handles[i])); + le16_to_cpu(payload->handles[i - 1])); if (i == max_handles) { payload->nr_recs = i; -- cgit v1.3.1 From 5c88a9ccd4c431d58b532e4158b6999a8350062c Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Tue, 19 Mar 2024 11:15:08 -0700 Subject: cxl/core/regs: Fix usage of map->reg_type in cxl_decode_regblock() before assigned In the error path, map->reg_type is being used for kernel warning before its value is setup. Found by code inspection. Exposure to user is wrong reg_type being emitted via kernel log. Use a local var for reg_type and retrieve value for usage. Fixes: 6c7f4f1e51c2 ("cxl/core/regs: Make cxl_map_{component, device}_regs() device generic") Reviewed-by: Dan Williams Reviewed-by: Davidlohr Bueso Signed-off-by: Dave Jiang --- drivers/cxl/core/regs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c index 372786f80955..3c42f984eeaf 100644 --- a/drivers/cxl/core/regs.c +++ b/drivers/cxl/core/regs.c @@ -271,6 +271,7 @@ EXPORT_SYMBOL_NS_GPL(cxl_map_device_regs, CXL); static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi, struct cxl_register_map *map) { + u8 reg_type = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK, reg_lo); int bar = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BIR_MASK, reg_lo); u64 offset = ((u64)reg_hi << 32) | (reg_lo & CXL_DVSEC_REG_LOCATOR_BLOCK_OFF_LOW_MASK); @@ -278,11 +279,11 @@ static bool cxl_decode_regblock(struct pci_dev *pdev, u32 reg_lo, u32 reg_hi, if (offset > pci_resource_len(pdev, bar)) { dev_warn(&pdev->dev, "BAR%d: %pr: too small (offset: %pa, type: %d)\n", bar, - &pdev->resource[bar], &offset, map->reg_type); + &pdev->resource[bar], &offset, reg_type); return false; } - map->reg_type = FIELD_GET(CXL_DVSEC_REG_LOCATOR_BLOCK_ID_MASK, reg_lo); + map->reg_type = reg_type; map->resource = pci_resource_start(pdev, bar) + offset; map->max_size = pci_resource_len(pdev, bar) - offset; return true; -- cgit v1.3.1 From c90847bcbfb65d0f1c48fcc73a2b3a2d4ceac6a1 Mon Sep 17 00:00:00 2001 From: Samuel Holland Date: Tue, 26 Mar 2024 22:45:24 -0700 Subject: cache: sifive_ccache: Partially convert to a platform driver Commit 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver") broke ccache initialization because the PLIC IRQ domain is no longer available during an arch_initcall: [ 0.087229] irq: no irq domain found for interrupt-controller@c000000 ! [ 0.087255] CCACHE: Could not request IRQ 0 Fix this by moving the IRQ handling code to a platform driver. Fixes: 8ec99b033147 ("irqchip/sifive-plic: Convert PLIC driver into a platform driver") Signed-off-by: Samuel Holland Tested-by: Geert Uytterhoeven Signed-off-by: Conor Dooley --- drivers/cache/sifive_ccache.c | 72 +++++++++++++++++++++++++++---------------- 1 file changed, 46 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/cache/sifive_ccache.c b/drivers/cache/sifive_ccache.c index 89ed6cd6b059..e9cc8b4786fb 100644 --- a/drivers/cache/sifive_ccache.c +++ b/drivers/cache/sifive_ccache.c @@ -15,6 +15,8 @@ #include #include #include +#include +#include #include #include #include @@ -247,13 +249,49 @@ static irqreturn_t ccache_int_handler(int irq, void *device) return IRQ_HANDLED; } +static int sifive_ccache_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + unsigned long quirks; + int intr_num, rc; + + quirks = (unsigned long)device_get_match_data(dev); + + intr_num = platform_irq_count(pdev); + if (!intr_num) + return dev_err_probe(dev, -ENODEV, "No interrupts property\n"); + + for (int i = 0; i < intr_num; i++) { + if (i == DATA_UNCORR && (quirks & QUIRK_BROKEN_DATA_UNCORR)) + continue; + + g_irq[i] = platform_get_irq(pdev, i); + if (g_irq[i] < 0) + return g_irq[i]; + + rc = devm_request_irq(dev, g_irq[i], ccache_int_handler, 0, "ccache_ecc", NULL); + if (rc) + return dev_err_probe(dev, rc, "Could not request IRQ %d\n", g_irq[i]); + } + + return 0; +} + +static struct platform_driver sifive_ccache_driver = { + .probe = sifive_ccache_probe, + .driver = { + .name = "sifive_ccache", + .of_match_table = sifive_ccache_ids, + }, +}; + static int __init sifive_ccache_init(void) { struct device_node *np; struct resource res; - int i, rc, intr_num; const struct of_device_id *match; unsigned long quirks; + int rc; np = of_find_matching_node_and_match(NULL, sifive_ccache_ids, &match); if (!np) @@ -277,28 +315,6 @@ static int __init sifive_ccache_init(void) goto err_unmap; } - intr_num = of_property_count_u32_elems(np, "interrupts"); - if (!intr_num) { - pr_err("No interrupts property\n"); - rc = -ENODEV; - goto err_unmap; - } - - for (i = 0; i < intr_num; i++) { - g_irq[i] = irq_of_parse_and_map(np, i); - - if (i == DATA_UNCORR && (quirks & QUIRK_BROKEN_DATA_UNCORR)) - continue; - - rc = request_irq(g_irq[i], ccache_int_handler, 0, "ccache_ecc", - NULL); - if (rc) { - pr_err("Could not request IRQ %d\n", g_irq[i]); - goto err_free_irq; - } - } - of_node_put(np); - #ifdef CONFIG_RISCV_NONSTANDARD_CACHE_OPS if (quirks & QUIRK_NONSTANDARD_CACHE_OPS) { riscv_cbom_block_size = SIFIVE_CCACHE_LINE_SIZE; @@ -315,11 +331,15 @@ static int __init sifive_ccache_init(void) #ifdef CONFIG_DEBUG_FS setup_sifive_debug(); #endif + + rc = platform_driver_register(&sifive_ccache_driver); + if (rc) + goto err_unmap; + + of_node_put(np); + return 0; -err_free_irq: - while (--i >= 0) - free_irq(g_irq[i], NULL); err_unmap: iounmap(ccache_base); err_node_put: -- cgit v1.3.1 From 302b84e84d108b878efc56ebfea09474159be56b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 28 Mar 2024 16:07:23 -0500 Subject: Revert "PCI: Mark LSI FW643 to avoid bus reset" This reverts commit 29a43dc130ce65d365a8ea9e1cc4bc51005a353e. 29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset") by Edmund was based on the assumption that the LSI / Agere FW643 has a defect such that it can't recover after a Secondary Bus Reset (SBR). But Takashi Sakamoto reported that SBR works fine on this same FW643 device in an AMD Ryzen 5 2400G system, so apparently there is some other aspect of Edmund's system that accounts for the issue. The down side of 29a43dc130ce is that when the FW643 is assigned to a VM, avoiding the SBR means we leak data out of the VM. Revert 29a43dc130ce until we figure out a better solution. In the meantime, we can use the sysfs "reset_method" interface to restrict the available reset methods. Link: https://lore.kernel.org/r/20240328212302.1582483-1-helgaas@kernel.org Fixes: 29a43dc130ce ("PCI: Mark LSI FW643 to avoid bus reset") Reported-by: Takashi Sakamoto Link: https://lore.kernel.org/r/20240325012135.36861-1-o-takashi@sakamocchi.jp Signed-off-by: Bjorn Helgaas Reviewed-by: Takashi Sakamoto --- drivers/pci/quirks.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bf4833221816..eff7f5df08e2 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3765,14 +3765,6 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x003e, quirk_no_bus_reset); */ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CAVIUM, 0xa100, quirk_no_bus_reset); -/* - * Apparently the LSI / Agere FW643 can't recover after a Secondary Bus - * Reset and requires a power-off or suspend/resume and rescan. Prevent - * use of that reset. - */ -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5900, quirk_no_bus_reset); -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATT, 0x5901, quirk_no_bus_reset); - /* * Some TI KeyStone C667X devices do not support bus/hot reset. The PCIESS * automatically disables LTSSM when Secondary Bus Reset is received and -- cgit v1.3.1 From 0640f47b742667fca6aac174f7cd62b6c2c7532c Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 13 Mar 2024 17:43:05 +0100 Subject: drm/msm/dp: fix runtime PM leak on disconnect Make sure to put the runtime PM usage count (and suspend) also when receiving a disconnect event while in the ST_MAINLINK_READY state. This specifically avoids leaking a runtime PM usage count on every disconnect with display servers that do not automatically enable external displays when receiving a hotplug notification. Fixes: 5814b8bf086a ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Cc: stable@vger.kernel.org # 6.8 Cc: Kuogee Hsieh Signed-off-by: Johan Hovold Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/582744/ Link: https://lore.kernel.org/r/20240313164306.23133-2-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dp/dp_display.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index d80f89581760..ffa785ec641a 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -629,6 +629,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data) dp_display_host_phy_exit(dp); dp->hpd_state = ST_DISCONNECTED; dp_display_notify_disconnect(&dp->dp_display.pdev->dev); + pm_runtime_put_sync(&pdev->dev); mutex_unlock(&dp->event_mutex); return 0; } -- cgit v1.3.1 From e86750b01a1560f198e4b3e21bb3f78bfd5bb2c3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 13 Mar 2024 17:43:06 +0100 Subject: drm/msm/dp: fix runtime PM leak on connect failure Make sure to balance the runtime PM usage counter (and suspend) before returning on connect failures (e.g. DPCD read failures after a spurious connect event or if link training fails). Fixes: 5814b8bf086a ("drm/msm/dp: incorporate pm_runtime framework into DP driver") Cc: stable@vger.kernel.org # 6.8 Cc: Kuogee Hsieh Signed-off-by: Johan Hovold Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/582746/ Link: https://lore.kernel.org/r/20240313164306.23133-3-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/dp/dp_display.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index ffa785ec641a..2ed40bd0acb6 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -572,6 +572,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data) ret = dp_display_usbpd_configure_cb(&pdev->dev); if (ret) { /* link train failed */ dp->hpd_state = ST_DISCONNECTED; + pm_runtime_put_sync(&pdev->dev); } else { dp->hpd_state = ST_MAINLINK_READY; } -- cgit v1.3.1 From c588f7d67044d6d59ef92d75a970b64929984d89 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 14:08:09 -0700 Subject: drm/msm: Add newlines to some debug prints These debug prints are missing newlines, leading to multiple messages being printed on one line and hard to read logs. Add newlines to have the debug prints on separate lines. The DBG macro used to add a newline, but I missed that while migrating to drm_dbg wrappers. Fixes: 7cb017db1896 ("drm/msm: Move FB debug prints to drm_dbg_state()") Fixes: 721c6e0c6aed ("drm/msm: Move vblank debug prints to drm_dbg_vbl()") Signed-off-by: Stephen Boyd Reviewed-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/584769/ Link: https://lore.kernel.org/r/20240325210810.1340820-1-swboyd@chromium.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/msm_fb.c | 6 +++--- drivers/gpu/drm/msm/msm_kms.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/msm_fb.c b/drivers/gpu/drm/msm/msm_fb.c index e3f61c39df69..80166f702a0d 100644 --- a/drivers/gpu/drm/msm/msm_fb.c +++ b/drivers/gpu/drm/msm/msm_fb.c @@ -89,7 +89,7 @@ int msm_framebuffer_prepare(struct drm_framebuffer *fb, for (i = 0; i < n; i++) { ret = msm_gem_get_and_pin_iova(fb->obj[i], aspace, &msm_fb->iova[i]); - drm_dbg_state(fb->dev, "FB[%u]: iova[%d]: %08llx (%d)", + drm_dbg_state(fb->dev, "FB[%u]: iova[%d]: %08llx (%d)\n", fb->base.id, i, msm_fb->iova[i], ret); if (ret) return ret; @@ -176,7 +176,7 @@ static struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, const struct msm_format *format; int ret, i, n; - drm_dbg_state(dev, "create framebuffer: mode_cmd=%p (%dx%d@%4.4s)", + drm_dbg_state(dev, "create framebuffer: mode_cmd=%p (%dx%d@%4.4s)\n", mode_cmd, mode_cmd->width, mode_cmd->height, (char *)&mode_cmd->pixel_format); @@ -232,7 +232,7 @@ static struct drm_framebuffer *msm_framebuffer_init(struct drm_device *dev, refcount_set(&msm_fb->dirtyfb, 1); - drm_dbg_state(dev, "create: FB ID: %d (%p)", fb->base.id, fb); + drm_dbg_state(dev, "create: FB ID: %d (%p)\n", fb->base.id, fb); return fb; diff --git a/drivers/gpu/drm/msm/msm_kms.c b/drivers/gpu/drm/msm/msm_kms.c index 84c21ec2ceea..af6a6fcb1173 100644 --- a/drivers/gpu/drm/msm/msm_kms.c +++ b/drivers/gpu/drm/msm/msm_kms.c @@ -149,7 +149,7 @@ int msm_crtc_enable_vblank(struct drm_crtc *crtc) struct msm_kms *kms = priv->kms; if (!kms) return -ENXIO; - drm_dbg_vbl(dev, "crtc=%u", crtc->base.id); + drm_dbg_vbl(dev, "crtc=%u\n", crtc->base.id); return vblank_ctrl_queue_work(priv, crtc, true); } @@ -160,7 +160,7 @@ void msm_crtc_disable_vblank(struct drm_crtc *crtc) struct msm_kms *kms = priv->kms; if (!kms) return; - drm_dbg_vbl(dev, "crtc=%u", crtc->base.id); + drm_dbg_vbl(dev, "crtc=%u\n", crtc->base.id); vblank_ctrl_queue_work(priv, crtc, false); } -- cgit v1.3.1 From 4f3b77ae5ff5b5ba9d99c5d5450db388dbee5107 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 14 Mar 2024 03:10:41 +0200 Subject: drm/msm/dpu: don't allow overriding data from catalog The data from catalog is marked as const, so it is a part of the RO segment. Allowing userspace to write to it through debugfs can cause protection faults. Set debugfs file mode to read-only for debug entries corresponding to perf_cfg coming from catalog. Fixes: abda0d925f9c ("drm/msm/dpu: Mark various data tables as const") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/582844/ Link: https://lore.kernel.org/r/20240314-dpu-perf-rework-v3-1-79fa4e065574@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c index ef871239adb2..68fae048a9a8 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c @@ -459,15 +459,15 @@ int dpu_core_perf_debugfs_init(struct dpu_kms *dpu_kms, struct dentry *parent) &perf->core_clk_rate); debugfs_create_u32("enable_bw_release", 0600, entry, (u32 *)&perf->enable_bw_release); - debugfs_create_u32("threshold_low", 0600, entry, + debugfs_create_u32("threshold_low", 0400, entry, (u32 *)&perf->perf_cfg->max_bw_low); - debugfs_create_u32("threshold_high", 0600, entry, + debugfs_create_u32("threshold_high", 0400, entry, (u32 *)&perf->perf_cfg->max_bw_high); - debugfs_create_u32("min_core_ib", 0600, entry, + debugfs_create_u32("min_core_ib", 0400, entry, (u32 *)&perf->perf_cfg->min_core_ib); - debugfs_create_u32("min_llcc_ib", 0600, entry, + debugfs_create_u32("min_llcc_ib", 0400, entry, (u32 *)&perf->perf_cfg->min_llcc_ib); - debugfs_create_u32("min_dram_ib", 0600, entry, + debugfs_create_u32("min_dram_ib", 0400, entry, (u32 *)&perf->perf_cfg->min_dram_ib); debugfs_create_file("perf_mode", 0600, entry, (u32 *)perf, &dpu_core_perf_mode_fops); -- cgit v1.3.1 From ee15c8bf5d77a306614bdefe33828310662dee05 Mon Sep 17 00:00:00 2001 From: Kuogee Hsieh Date: Fri, 29 Mar 2024 12:46:26 -0700 Subject: drm/msm/dp: assign correct DP controller ID to x1e80100 interface table At current x1e80100 interface table, interface #3 is wrongly connected to DP controller #0 and interface #4 wrongly connected to DP controller #2. Fix this problem by connect Interface #3 to DP controller #0 and interface #4 connect to DP controller #1. Also add interface #6, #7 and #8 connections to DP controller to complete x1e80100 interface table. Changs in V3: -- add v2 changes log Changs in V2: -- add x1e80100 to subject -- add Fixes Fixes: e3b1f369db5a ("drm/msm/dpu: Add X1E80100 support") Signed-off-by: Kuogee Hsieh Reviewed-by: Abhinav Kumar Reviewed-by: Abel Vesa Patchwork: https://patchwork.freedesktop.org/patch/585549/ Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.com Signed-off-by: Abhinav Kumar --- .../drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h | 34 ++++++++++++++++++++-- 1 file changed, 31 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h index 9a9f7092c526..a3e60ac70689 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h +++ b/drivers/gpu/drm/msm/disp/dpu1/catalog/dpu_9_2_x1e80100.h @@ -324,6 +324,7 @@ static const struct dpu_wb_cfg x1e80100_wb[] = { }, }; +/* TODO: INTF 3, 8 and 7 are used for MST, marked as INTF_NONE for now */ static const struct dpu_intf_cfg x1e80100_intf[] = { { .name = "intf_0", .id = INTF_0, @@ -358,8 +359,8 @@ static const struct dpu_intf_cfg x1e80100_intf[] = { .name = "intf_3", .id = INTF_3, .base = 0x37000, .len = 0x280, .features = INTF_SC7280_MASK, - .type = INTF_DP, - .controller_id = MSM_DP_CONTROLLER_1, + .type = INTF_NONE, + .controller_id = MSM_DP_CONTROLLER_0, /* pair with intf_0 for DP MST */ .prog_fetch_lines_worst_case = 24, .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 30), .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 31), @@ -368,7 +369,7 @@ static const struct dpu_intf_cfg x1e80100_intf[] = { .base = 0x38000, .len = 0x280, .features = INTF_SC7280_MASK, .type = INTF_DP, - .controller_id = MSM_DP_CONTROLLER_2, + .controller_id = MSM_DP_CONTROLLER_1, .prog_fetch_lines_worst_case = 24, .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 20), .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 21), @@ -381,6 +382,33 @@ static const struct dpu_intf_cfg x1e80100_intf[] = { .prog_fetch_lines_worst_case = 24, .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 22), .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 23), + }, { + .name = "intf_6", .id = INTF_6, + .base = 0x3A000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_DP, + .controller_id = MSM_DP_CONTROLLER_2, + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 17), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 16), + }, { + .name = "intf_7", .id = INTF_7, + .base = 0x3b000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_NONE, + .controller_id = MSM_DP_CONTROLLER_2, /* pair with intf_6 for DP MST */ + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 18), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 19), + }, { + .name = "intf_8", .id = INTF_8, + .base = 0x3c000, .len = 0x280, + .features = INTF_SC7280_MASK, + .type = INTF_NONE, + .controller_id = MSM_DP_CONTROLLER_1, /* pair with intf_4 for DP MST */ + .prog_fetch_lines_worst_case = 24, + .intr_underrun = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 12), + .intr_vsync = DPU_IRQ_IDX(MDP_SSPP_TOP0_INTR, 13), }, }; -- cgit v1.3.1 From 481047d7e8391d3842ae59025806531cdad710d9 Mon Sep 17 00:00:00 2001 From: "Yanjun.Zhu" Date: Thu, 14 Mar 2024 07:51:40 +0100 Subject: RDMA/rxe: Fix the problem "mutex_destroy missing" When a mutex lock is not used any more, the function mutex_destroy should be called to mark the mutex lock uninitialized. Fixes: 8700e3e7c485 ("Soft RoCE driver") Signed-off-by: Yanjun.Zhu Link: https://lore.kernel.org/r/20240314065140.27468-1-yanjun.zhu@linux.dev Reviewed-by: Daisuke Matsuda Signed-off-by: Leon Romanovsky --- drivers/infiniband/sw/rxe/rxe.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/infiniband/sw/rxe/rxe.c b/drivers/infiniband/sw/rxe/rxe.c index ae466e72fc43..255677bc12b2 100644 --- a/drivers/infiniband/sw/rxe/rxe.c +++ b/drivers/infiniband/sw/rxe/rxe.c @@ -33,6 +33,8 @@ void rxe_dealloc(struct ib_device *ib_dev) if (rxe->tfm) crypto_free_shash(rxe->tfm); + + mutex_destroy(&rxe->usdev_lock); } /* initialize rxe device parameters */ -- cgit v1.3.1 From b68e1acb5834ed1a2ad42d9d002815a8bae7c0b6 Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Fri, 22 Mar 2024 13:20:49 +0200 Subject: RDMA/cm: Print the old state when cm_destroy_id gets timeout The old state is helpful for debugging, as the current state is always IB_CM_IDLE when timeout happens. Fixes: 96d9cbe2f2ff ("RDMA/cm: add timeout to cm_destroy_id wait") Signed-off-by: Mark Zhang Link: https://lore.kernel.org/r/20240322112049.2022994-1-markzhang@nvidia.com Signed-off-by: Leon Romanovsky --- drivers/infiniband/core/cm.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/infiniband/core/cm.c b/drivers/infiniband/core/cm.c index bf0df6ee4f78..07fb8d3c037f 100644 --- a/drivers/infiniband/core/cm.c +++ b/drivers/infiniband/core/cm.c @@ -1026,23 +1026,26 @@ static void cm_reset_to_idle(struct cm_id_private *cm_id_priv) } } -static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id) +static noinline void cm_destroy_id_wait_timeout(struct ib_cm_id *cm_id, + enum ib_cm_state old_state) { struct cm_id_private *cm_id_priv; cm_id_priv = container_of(cm_id, struct cm_id_private, id); - pr_err("%s: cm_id=%p timed out. state=%d refcnt=%d\n", __func__, - cm_id, cm_id->state, refcount_read(&cm_id_priv->refcount)); + pr_err("%s: cm_id=%p timed out. state %d -> %d, refcnt=%d\n", __func__, + cm_id, old_state, cm_id->state, refcount_read(&cm_id_priv->refcount)); } static void cm_destroy_id(struct ib_cm_id *cm_id, int err) { struct cm_id_private *cm_id_priv; + enum ib_cm_state old_state; struct cm_work *work; int ret; cm_id_priv = container_of(cm_id, struct cm_id_private, id); spin_lock_irq(&cm_id_priv->lock); + old_state = cm_id->state; retest: switch (cm_id->state) { case IB_CM_LISTEN: @@ -1151,7 +1154,7 @@ retest: msecs_to_jiffies( CM_DESTROY_ID_WAIT_TIMEOUT)); if (!ret) /* timeout happened */ - cm_destroy_id_wait_timeout(cm_id); + cm_destroy_id_wait_timeout(cm_id, old_state); } while (!ret); while ((work = cm_dequeue_work(cm_id_priv)) != NULL) -- cgit v1.3.1 From 8844f467d6a58dc915f241e81c46e0c126f8c070 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sat, 30 Mar 2024 05:53:22 +0200 Subject: drm/msm/dpu: make error messages at dpu_core_irq_register_callback() more sensible There is little point in using %ps to print a value known to be NULL. On the other hand it makes sense to print the callback symbol in the 'invalid IRQ' message. Correct those two error messages to make more sense. Fixes: 6893199183f8 ("drm/msm/dpu: stop using raw IRQ indices in the kernel output") Signed-off-by: Dmitry Baryshkov Reviewed-by: Marijn Suijten Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/585565/ Link: https://lore.kernel.org/r/20240330-dpu-irq-messages-v1-1-9ce782ae35f9@linaro.org Signed-off-by: Abhinav Kumar --- drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c index 946dd0135dff..6a0a74832fb6 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_interrupts.c @@ -525,14 +525,14 @@ int dpu_core_irq_register_callback(struct dpu_kms *dpu_kms, int ret; if (!irq_cb) { - DPU_ERROR("invalid IRQ=[%d, %d] irq_cb:%ps\n", - DPU_IRQ_REG(irq_idx), DPU_IRQ_BIT(irq_idx), irq_cb); + DPU_ERROR("IRQ=[%d, %d] NULL callback\n", + DPU_IRQ_REG(irq_idx), DPU_IRQ_BIT(irq_idx)); return -EINVAL; } if (!dpu_core_irq_is_valid(irq_idx)) { - DPU_ERROR("invalid IRQ=[%d, %d]\n", - DPU_IRQ_REG(irq_idx), DPU_IRQ_BIT(irq_idx)); + DPU_ERROR("invalid IRQ=[%d, %d] irq_cb:%ps\n", + DPU_IRQ_REG(irq_idx), DPU_IRQ_BIT(irq_idx), irq_cb); return -EINVAL; } -- cgit v1.3.1 From cd49cca222bc5532105a1f20bff6ae60d7bf7713 Mon Sep 17 00:00:00 2001 From: Abhinav Kumar Date: Wed, 6 Mar 2024 11:35:15 -0800 Subject: drm/msm/dp: fix typo in dp_display_handle_port_status_changed() Fix the typo in the name of dp_display_handle_port_status_changed(). Fixes: c58eb1b54fee ("drm/msm/dp: fix connect/disconnect handled at irq_hpd") Signed-off-by: Abhinav Kumar Reviewed-by: Dmitry Baryshkov Patchwork: https://patchwork.freedesktop.org/patch/581746/ Link: https://lore.kernel.org/r/20240306193515.455388-1-quic_abhinavk@quicinc.com --- drivers/gpu/drm/msm/dp/dp_display.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 2ed40bd0acb6..9575d4b80c29 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -468,7 +468,7 @@ static void dp_display_handle_video_request(struct dp_display_private *dp) } } -static int dp_display_handle_port_ststus_changed(struct dp_display_private *dp) +static int dp_display_handle_port_status_changed(struct dp_display_private *dp) { int rc = 0; @@ -525,7 +525,7 @@ static int dp_display_usbpd_attention_cb(struct device *dev) drm_dbg_dp(dp->drm_dev, "hpd_state=%d sink_request=%d\n", dp->hpd_state, sink_request); if (sink_request & DS_PORT_STATUS_CHANGED) - rc = dp_display_handle_port_ststus_changed(dp); + rc = dp_display_handle_port_status_changed(dp); else rc = dp_display_handle_irq_hpd(dp); } -- cgit v1.3.1 From c032cdd48b29549e8283c2fea99e7d91ddefebf7 Mon Sep 17 00:00:00 2001 From: Mika Westerberg Date: Tue, 26 Mar 2024 10:58:15 +0200 Subject: thunderbolt: Do not create DisplayPort tunnels on adapters of the same router Probably due to a firmware bug Dell TB16 dock announces that one of its DisplayPort adapters is actually DP IN. Now this is possible and used with some external GPUs but not likely in this case as we are dealing with a dock. Anyways the problem is that the driver tries to create a DisplayPort tunnel between adapters of the same router which then shows to user that there is no picture on the display (because there are no available DP OUT adapters on the dock anymore). Fix this by not creating DisplayPort tunnels between adapters that are on the same router. Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265 Fixes: 274baf695b08 ("thunderbolt: Add DP IN added last in the head of the list of DP resources") Cc: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg --- drivers/thunderbolt/tb.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index c5ce7a694b27..360cb95f39aa 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -1801,6 +1801,12 @@ static struct tb_port *tb_find_dp_out(struct tb *tb, struct tb_port *in) continue; } + /* Needs to be on different routers */ + if (in->sw == port->sw) { + tb_port_dbg(port, "skipping DP OUT on same router\n"); + continue; + } + tb_port_dbg(port, "DP OUT available\n"); /* -- cgit v1.3.1 From f7c52345ccc96343c0a05bdea3121c8ac7b67d5f Mon Sep 17 00:00:00 2001 From: Kwangjin Ko Date: Tue, 2 Apr 2024 17:14:03 +0900 Subject: cxl/core: Fix initialization of mbox_cmd.size_out in get event Since mbox_cmd.size_out is overwritten with the actual output size in the function below, it needs to be initialized every time. cxl_internal_send_cmd -> __cxl_pci_mbox_send_cmd Problem scenario: 1) The size_out variable is initially set to the size of the mailbox. 2) Read an event. - size_out is set to 160 bytes(header 32B + one event 128B). - Two event are created while reading. 3) Read the new *two* events. - size_out is still set to 160 bytes. - Although the value of out_len is 288 bytes, only 160 bytes are copied from the mailbox register to the local variable. - record_count is set to 2. - Accessing records[1] will result in reading incorrect data. Fixes: 6ebe28f9ec72 ("cxl/mem: Read, trace, and clear events on driver load") Tested-by: Ira Weiny Reviewed-by: Ira Weiny Reviewed-by: Jonathan Cameron Signed-off-by: Kwangjin Ko Signed-off-by: Dave Jiang --- drivers/cxl/core/mbox.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c index 50146161887d..f0f54aeccc87 100644 --- a/drivers/cxl/core/mbox.c +++ b/drivers/cxl/core/mbox.c @@ -958,13 +958,14 @@ static void cxl_mem_get_records_log(struct cxl_memdev_state *mds, .payload_in = &log_type, .size_in = sizeof(log_type), .payload_out = payload, - .size_out = mds->payload_size, .min_out = struct_size(payload, records, 0), }; do { int rc, i; + mbox_cmd.size_out = mds->payload_size; + rc = cxl_internal_send_cmd(mds, &mbox_cmd); if (rc) { dev_err_ratelimited(dev, -- cgit v1.3.1 From 5bfc311dd6c376d350b39028b9000ad766ddc934 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 4 Apr 2024 15:11:05 +0300 Subject: usb: xhci: correct return value in case of STS_HCE If we get STS_HCE we give up on the interrupt, but for the purpose of IRQ handling that still counts as ours. We may return IRQ_NONE only if we are positive that it wasn't ours. Hence correct the default. Fixes: 2a25e66d676d ("xhci: print warning when HCE was set") Cc: stable@vger.kernel.org # v6.2+ Signed-off-by: Oliver Neukum Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240404121106.2842417-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 52278afea94b..575f0fd9c9f1 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3133,7 +3133,7 @@ static int xhci_handle_events(struct xhci_hcd *xhci, struct xhci_interrupter *ir irqreturn_t xhci_irq(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - irqreturn_t ret = IRQ_NONE; + irqreturn_t ret = IRQ_HANDLED; u32 status; spin_lock(&xhci->lock); @@ -3141,12 +3141,13 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) status = readl(&xhci->op_regs->status); if (status == ~(u32)0) { xhci_hc_died(xhci); - ret = IRQ_HANDLED; goto out; } - if (!(status & STS_EINT)) + if (!(status & STS_EINT)) { + ret = IRQ_NONE; goto out; + } if (status & STS_HCE) { xhci_warn(xhci, "WARNING: Host Controller Error\n"); @@ -3156,7 +3157,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) if (status & STS_FATAL) { xhci_warn(xhci, "WARNING: Host System Error\n"); xhci_halt(xhci); - ret = IRQ_HANDLED; goto out; } @@ -3167,7 +3167,6 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd) */ status |= STS_EINT; writel(status, &xhci->op_regs->status); - ret = IRQ_HANDLED; /* This is the handler of the primary interrupter */ xhci_handle_events(xhci, xhci->interrupters[0]); -- cgit v1.3.1 From dda7e89e53d6ebf27c49df7d87a54e3e1614d332 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Thu, 4 Apr 2024 15:11:06 +0300 Subject: xhci: Fix root hub port null pointer dereference in xhci tracepoints The pointer from a xhci usb virt device to its root hub port (vdev->rhub_port) is set later when device is addressed, not while vdev is allocated. Tracepoints dereferenced this rhub_port pointer when freeing the virt device, which causes null pointer dereference if tracing is enabled and device is freed before addressed. This can happen if tracing is enabled and xhci driver is unloaded before a device is fully enumerated, or initial enumeration fails and device is reset and freed before retry. Don't dereference the rhub_port or show port numbers when tracing xhci_free_virt_device(). This info is not very useful anyway. Print the more useful slot id instead Fixes: 06790c19086f ("xhci: replace real & fake port with pointer to root hub port") Reported-by: Thinh Nguyen Closes: https://lore.kernel.org/linux-usb/20240402005007.klv2ij727fkz7rpd@synopsys.com/ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20240404121106.2842417-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-trace.h | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/xhci-trace.h b/drivers/usb/host/xhci-trace.h index 1740000d54c2..5762564b9d73 100644 --- a/drivers/usb/host/xhci-trace.h +++ b/drivers/usb/host/xhci-trace.h @@ -172,8 +172,7 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, __field(void *, vdev) __field(unsigned long long, out_ctx) __field(unsigned long long, in_ctx) - __field(int, hcd_portnum) - __field(int, hw_portnum) + __field(int, slot_id) __field(u16, current_mel) ), @@ -181,13 +180,12 @@ DECLARE_EVENT_CLASS(xhci_log_free_virt_dev, __entry->vdev = vdev; __entry->in_ctx = (unsigned long long) vdev->in_ctx->dma; __entry->out_ctx = (unsigned long long) vdev->out_ctx->dma; - __entry->hcd_portnum = (int) vdev->rhub_port->hcd_portnum; - __entry->hw_portnum = (int) vdev->rhub_port->hw_portnum; + __entry->slot_id = (int) vdev->slot_id; __entry->current_mel = (u16) vdev->current_mel; ), - TP_printk("vdev %p ctx %llx | %llx hcd_portnum %d hw_portnum %d current_mel %d", - __entry->vdev, __entry->in_ctx, __entry->out_ctx, - __entry->hcd_portnum, __entry->hw_portnum, __entry->current_mel + TP_printk("vdev %p slot %d ctx %llx | %llx current_mel %d", + __entry->vdev, __entry->slot_id, __entry->in_ctx, + __entry->out_ctx, __entry->current_mel ) ); -- cgit v1.3.1 From ce4c8d21054ae9396cd759fe6e8157b525616dc4 Mon Sep 17 00:00:00 2001 From: "Christian A. Ehrhardt" Date: Mon, 1 Apr 2024 23:05:15 +0200 Subject: usb: typec: ucsi: Fix connector check on init Fix issues when initially checking for a connector change: - Use the correct connector number not the entire CCI. - Call ->read under the PPM lock. - Remove a bogus READ_ONCE. Fixes: 808a8b9e0b87 ("usb: typec: ucsi: Check for notifications after init") Cc: stable@kernel.org Signed-off-by: Christian A. Ehrhardt Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/ucsi/ucsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c index 31d8a46ae5e7..bd6ae92aa39e 100644 --- a/drivers/usb/typec/ucsi/ucsi.c +++ b/drivers/usb/typec/ucsi/ucsi.c @@ -1736,11 +1736,13 @@ static int ucsi_init(struct ucsi *ucsi) ucsi->connector = connector; ucsi->ntfy = ntfy; + mutex_lock(&ucsi->ppm_lock); ret = ucsi->ops->read(ucsi, UCSI_CCI, &cci, sizeof(cci)); + mutex_unlock(&ucsi->ppm_lock); if (ret) return ret; - if (UCSI_CCI_CONNECTOR(READ_ONCE(cci))) - ucsi_connector_change(ucsi, cci); + if (UCSI_CCI_CONNECTOR(cci)) + ucsi_connector_change(ucsi, UCSI_CCI_CONNECTOR(cci)); return 0; -- cgit v1.3.1 From 1500a7b2794d46beadd408132ddb5ef669c5c057 Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 2 Apr 2024 13:09:50 +0200 Subject: usb: gadget: functionfs: Fix inverted DMA fence direction A "read" fence was installed when the DMABUF was to be written to, and a "write" fence was installed when the DMABUF was to be read from. Besides, dma_resv_usage_rw() should only be used when waiting for fences. Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface") Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20240402110951.16376-2-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index bffbc1dc651f..70e8532127ad 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -1578,6 +1578,7 @@ static int ffs_dmabuf_transfer(struct file *file, struct ffs_dmabuf_priv *priv; struct ffs_dma_fence *fence; struct usb_request *usb_req; + enum dma_resv_usage resv_dir; struct dma_buf *dmabuf; struct ffs_ep *ep; bool cookie; @@ -1665,8 +1666,9 @@ static int ffs_dmabuf_transfer(struct file *file, dma_fence_init(&fence->base, &ffs_dmabuf_fence_ops, &priv->lock, priv->context, seqno); - dma_resv_add_fence(dmabuf->resv, &fence->base, - dma_resv_usage_rw(epfile->in)); + resv_dir = epfile->in ? DMA_RESV_USAGE_WRITE : DMA_RESV_USAGE_READ; + + dma_resv_add_fence(dmabuf->resv, &fence->base, resv_dir); dma_resv_unlock(dmabuf->resv); /* Now that the dma_fence is in place, queue the transfer. */ -- cgit v1.3.1 From 862b416560c348f66d2091c56e71fd5462510cab Mon Sep 17 00:00:00 2001 From: Paul Cercueil Date: Tue, 2 Apr 2024 13:09:51 +0200 Subject: usb: gadget: functionfs: Wait for fences before enqueueing DMABUF Instead of bailing when fences have already been installed on the DMABUF, wait for them (with a timeout) when doing a blocking operation. This fixes the issue where userspace would submit a DMABUF with fences already installed, with the (correct) expectation that it would just work. Fixes: 7b07a2a7ca02 ("usb: gadget: functionfs: Add DMABUF import interface") Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20240402110951.16376-3-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_fs.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 70e8532127ad..f855f1fc8e5e 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -46,6 +46,8 @@ #define FUNCTIONFS_MAGIC 0xa647361 /* Chosen by a honest dice roll ;) */ +#define DMABUF_ENQUEUE_TIMEOUT_MS 5000 + MODULE_IMPORT_NS(DMA_BUF); /* Reference counter handling */ @@ -1580,9 +1582,11 @@ static int ffs_dmabuf_transfer(struct file *file, struct usb_request *usb_req; enum dma_resv_usage resv_dir; struct dma_buf *dmabuf; + unsigned long timeout; struct ffs_ep *ep; bool cookie; u32 seqno; + long retl; int ret; if (req->flags & ~USB_FFS_DMABUF_TRANSFER_MASK) @@ -1616,17 +1620,14 @@ static int ffs_dmabuf_transfer(struct file *file, goto err_attachment_put; /* Make sure we don't have writers */ - if (!dma_resv_test_signaled(dmabuf->resv, DMA_RESV_USAGE_WRITE)) { - pr_vdebug("FFS WRITE fence is not signaled\n"); - ret = -EBUSY; - goto err_resv_unlock; - } - - /* If we're writing to the DMABUF, make sure we don't have readers */ - if (epfile->in && - !dma_resv_test_signaled(dmabuf->resv, DMA_RESV_USAGE_READ)) { - pr_vdebug("FFS READ fence is not signaled\n"); - ret = -EBUSY; + timeout = nonblock ? 0 : msecs_to_jiffies(DMABUF_ENQUEUE_TIMEOUT_MS); + retl = dma_resv_wait_timeout(dmabuf->resv, + dma_resv_usage_rw(epfile->in), + true, timeout); + if (retl == 0) + retl = -EBUSY; + if (retl < 0) { + ret = (int)retl; goto err_resv_unlock; } -- cgit v1.3.1 From c4128304c2169b4664ed6fb6200f228cead2ab70 Mon Sep 17 00:00:00 2001 From: Kyle Tso Date: Thu, 4 Apr 2024 21:35:17 +0800 Subject: usb: typec: tcpm: Correct the PDO counting in pd_set Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets. Fixes: cd099cde4ed2 ("usb: typec: tcpm: Support multiple capabilities") Cc: stable@vger.kernel.org Signed-off-by: Kyle Tso Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240404133517.2707955-1-kyletso@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/tcpm/tcpm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index c26fb70c3ec6..ab6ed6111ed0 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -6855,14 +6855,14 @@ static int tcpm_pd_set(struct typec_port *p, struct usb_power_delivery *pd) if (data->sink_desc.pdo[0]) { for (i = 0; i < PDO_MAX_OBJECTS && data->sink_desc.pdo[i]; i++) port->snk_pdo[i] = data->sink_desc.pdo[i]; - port->nr_snk_pdo = i + 1; + port->nr_snk_pdo = i; port->operating_snk_mw = data->operating_snk_mw; } if (data->source_desc.pdo[0]) { for (i = 0; i < PDO_MAX_OBJECTS && data->source_desc.pdo[i]; i++) port->src_pdo[i] = data->source_desc.pdo[i]; - port->nr_src_pdo = i + 1; + port->nr_src_pdo = i; } switch (port->state) { -- cgit v1.3.1 From 6334b8e4553cc69f51e383c9de545082213d785e Mon Sep 17 00:00:00 2001 From: Norihiko Hama Date: Wed, 27 Mar 2024 11:35:50 +0900 Subject: usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled. After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled. As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL. And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object. Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory. [function unlink via configfs] usb0: eth_stop dev->port_usb=ffffff9b179c3200 --> error happens in usb_ep_enable(). NCM: ncm_disable: ncm=ffffff9b179c3200 --> no gether_disconnect() since ncm->port.in_ep->enabled is false. NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200 NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm [function link via configfs] NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000 NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000 NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0 usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit() --> dev->wrap() Unable to handle kernel paging request at virtual address dead00000000014f This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established. Signed-off-by: Norihiko Hama Cc: stable Link: https://lore.kernel.org/r/20240327023550.51214-1-Norihiko.Hama@alpsalpine.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/function/f_ncm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c index 28f4e6552e84..0acc32ed9960 100644 --- a/drivers/usb/gadget/function/f_ncm.c +++ b/drivers/usb/gadget/function/f_ncm.c @@ -878,7 +878,7 @@ static int ncm_set_alt(struct usb_function *f, unsigned intf, unsigned alt) if (alt > 1) goto fail; - if (ncm->port.in_ep->enabled) { + if (ncm->netdev) { DBG(cdev, "reset ncm\n"); ncm->netdev = NULL; gether_disconnect(&ncm->port); @@ -1367,7 +1367,7 @@ static void ncm_disable(struct usb_function *f) DBG(cdev, "ncm deactivated\n"); - if (ncm->port.in_ep->enabled) { + if (ncm->netdev) { ncm->netdev = NULL; gether_disconnect(&ncm->port); } -- cgit v1.3.1 From d920a2ed8620be04a3301e1a9c2b7cc1de65f19d Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng Date: Tue, 5 Mar 2024 14:51:38 +0800 Subject: usb: Disable USB3 LPM at shutdown SanDisks USB3 storage may disapper after system reboot: usb usb2-port3: link state change xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 usb usb2-port3: do warm reset, port only xhci_hcd 0000:00:14.0: xhci_hub_status_data: stopping usb2 port polling xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2b0, return 0x2b0 usb usb2-port3: not warm reset yet, waiting 50ms xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2f0, return 0x2f0 usb usb2-port3: not warm reset yet, waiting 200ms ... xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x6802c0, return 0x7002c0 usb usb2-port3: not warm reset yet, waiting 200ms xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x4802c0 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x4002c0 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x2c0 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x2c0, return 0x2c0 usb usb2-port3: not enabled, trying warm reset again... This is due to the USB device still cause port change event after xHCI is shuted down: xhci_hcd 0000:38:00.0: // Setting command ring address to 0xffffe001 xhci_hcd 0000:38:00.0: xhci_resume: starting usb3 port polling. xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb4 port polling xhci_hcd 0000:38:00.0: xhci_hub_status_data: stopping usb3 port polling xhci_hcd 0000:38:00.0: hcd_pci_runtime_resume: 0 xhci_hcd 0000:38:00.0: xhci_shutdown: stopping usb3 port polling. xhci_hcd 0000:38:00.0: // Halt the HC xhci_hcd 0000:38:00.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: xhci_shutdown: stopping usb1 port polling. xhci_hcd 0000:00:14.0: // Halt the HC xhci_hcd 0000:00:14.0: xhci_shutdown completed - status = 1 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1311 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x201203, return 0x100203 xhci_hcd 0000:00:14.0: clear port3 reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 warm(BH) reset change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 link state change, portsc: 0x1203 xhci_hcd 0000:00:14.0: clear port3 connect change, portsc: 0x1203 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1203, return 0x203 usb 2-3: device not accepting address 2, error -108 xhci_hcd 0000:00:14.0: xHCI dying or halted, can't queue_command xhci_hcd 0000:00:14.0: Set port 2-3 link state, portsc: 0x1203, write 0x11261 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x1263, return 0x263 xhci_hcd 0000:00:14.0: set port reset, actual port 2-3 status = 0x1271 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12b1, return 0x2b1 usb usb2-port3: not reset yet, waiting 60ms ACPI: PM: Preparing to enter system sleep state S5 xhci_hcd 0000:00:14.0: Get port status 2-3 read: 0x12f1, return 0x2f1 usb usb2-port3: not reset yet, waiting 200ms reboot: Restarting system The port change event is caused by LPM transition, so disabling LPM at shutdown to make sure the device is in U0 for warmboot. Signed-off-by: Kai-Heng Feng Cc: stable Link: https://lore.kernel.org/r/20240305065140.66801-1-kai.heng.feng@canonical.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/port.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index 686c01af03e6..0e1262a077ae 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -449,8 +449,10 @@ static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); - if (port_dev->child) + if (port_dev->child) { usb_disable_usb2_hardware_lpm(port_dev->child); + usb_unlocked_disable_lpm(port_dev->child); + } } static const struct dev_pm_ops usb_port_pm_ops = { -- cgit v1.3.1 From 1fc9af813b25e146d3607669247d0f970f5a87c3 Mon Sep 17 00:00:00 2001 From: Boris Brezillon Date: Fri, 5 Jan 2024 21:46:11 +0300 Subject: drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() Subject: [PATCH] drm/panfrost: Fix the error path in panfrost_mmu_map_fault_addr() If some the pages or sgt allocation failed, we shouldn't release the pages ref we got earlier, otherwise we will end up with unbalanced get/put_pages() calls. We should instead leave everything in place and let the BO release function deal with extra cleanup when the object is destroyed, or let the fault handler try again next time it's called. Fixes: 187d2929206e ("drm/panfrost: Add support for GPU heap allocations") Cc: Reviewed-by: Steven Price Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Boris Brezillon Co-developed-by: Dmitry Osipenko Signed-off-by: Dmitry Osipenko Link: https://patchwork.freedesktop.org/patch/msgid/20240105184624.508603-18-dmitry.osipenko@collabora.com --- drivers/gpu/drm/panfrost/panfrost_mmu.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panfrost/panfrost_mmu.c b/drivers/gpu/drm/panfrost/panfrost_mmu.c index f38385fe76bb..b91019cd5acb 100644 --- a/drivers/gpu/drm/panfrost/panfrost_mmu.c +++ b/drivers/gpu/drm/panfrost/panfrost_mmu.c @@ -502,11 +502,18 @@ static int panfrost_mmu_map_fault_addr(struct panfrost_device *pfdev, int as, mapping_set_unevictable(mapping); for (i = page_offset; i < page_offset + NUM_FAULT_PAGES; i++) { + /* Can happen if the last fault only partially filled this + * section of the pages array before failing. In that case + * we skip already filled pages. + */ + if (pages[i]) + continue; + pages[i] = shmem_read_mapping_page(mapping, i); if (IS_ERR(pages[i])) { ret = PTR_ERR(pages[i]); pages[i] = NULL; - goto err_pages; + goto err_unlock; } } @@ -514,7 +521,7 @@ static int panfrost_mmu_map_fault_addr(struct panfrost_device *pfdev, int as, ret = sg_alloc_table_from_pages(sgt, pages + page_offset, NUM_FAULT_PAGES, 0, SZ_2M, GFP_KERNEL); if (ret) - goto err_pages; + goto err_unlock; ret = dma_map_sgtable(pfdev->dev, sgt, DMA_BIDIRECTIONAL, 0); if (ret) @@ -537,8 +544,6 @@ out: err_map: sg_free_table(sgt); -err_pages: - drm_gem_shmem_put_pages(&bo->base); err_unlock: dma_resv_unlock(obj->resv); err_bo: -- cgit v1.3.1 From d4e655c49f474deffaf5ed7e65034b8167ee39c8 Mon Sep 17 00:00:00 2001 From: Alexander Wetzel Date: Mon, 1 Apr 2024 21:10:38 +0200 Subject: scsi: sg: Avoid race in error handling & drop bogus warn Commit 27f58c04a8f4 ("scsi: sg: Avoid sg device teardown race") introduced an incorrect WARN_ON_ONCE() and missed a sequence where sg_device_destroy() was used after scsi_device_put(). sg_device_destroy() is accessing the parent scsi_device request_queue which will already be set to NULL when the preceding call to scsi_device_put() removed the last reference to the parent scsi_device. Drop the incorrect WARN_ON_ONCE() - allowing more than one concurrent access to the sg device - and make sure sg_device_destroy() is not used after scsi_device_put() in the error handling. Link: https://lore.kernel.org/all/5375B275-D137-4D5F-BE25-6AF8ACAE41EF@linux.ibm.com Fixes: 27f58c04a8f4 ("scsi: sg: Avoid sg device teardown race") Cc: stable@vger.kernel.org Signed-off-by: Alexander Wetzel Link: https://lore.kernel.org/r/20240401191038.18359-1-Alexander@wetzel-home.de Tested-by: Sachin Sant Reviewed-by: Bart Van Assche Signed-off-by: Martin K. Petersen --- drivers/scsi/sg.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index 386981c6976a..baf870a03ecf 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -285,6 +285,7 @@ sg_open(struct inode *inode, struct file *filp) int dev = iminor(inode); int flags = filp->f_flags; struct request_queue *q; + struct scsi_device *device; Sg_device *sdp; Sg_fd *sfp; int retval; @@ -301,11 +302,12 @@ sg_open(struct inode *inode, struct file *filp) /* This driver's module count bumped by fops_get in */ /* Prevent the device driver from vanishing while we sleep */ - retval = scsi_device_get(sdp->device); + device = sdp->device; + retval = scsi_device_get(device); if (retval) goto sg_put; - retval = scsi_autopm_get_device(sdp->device); + retval = scsi_autopm_get_device(device); if (retval) goto sdp_put; @@ -313,7 +315,7 @@ sg_open(struct inode *inode, struct file *filp) * check if O_NONBLOCK. Permits SCSI commands to be issued * during error recovery. Tread carefully. */ if (!((flags & O_NONBLOCK) || - scsi_block_when_processing_errors(sdp->device))) { + scsi_block_when_processing_errors(device))) { retval = -ENXIO; /* we are in error recovery for this device */ goto error_out; @@ -344,7 +346,7 @@ sg_open(struct inode *inode, struct file *filp) if (sdp->open_cnt < 1) { /* no existing opens */ sdp->sgdebug = 0; - q = sdp->device->request_queue; + q = device->request_queue; sdp->sg_tablesize = queue_max_segments(q); } sfp = sg_add_sfp(sdp); @@ -370,10 +372,11 @@ out_undo: error_mutex_locked: mutex_unlock(&sdp->open_rel_lock); error_out: - scsi_autopm_put_device(sdp->device); + scsi_autopm_put_device(device); sdp_put: - scsi_device_put(sdp->device); - goto sg_put; + kref_put(&sdp->d_ref, sg_device_destroy); + scsi_device_put(device); + return retval; } /* Release resources associated with a successful sg_open() @@ -2233,7 +2236,6 @@ sg_remove_sfp_usercontext(struct work_struct *work) "sg_remove_sfp: sfp=0x%p\n", sfp)); kfree(sfp); - WARN_ON_ONCE(kref_read(&sdp->d_ref) != 1); kref_put(&sdp->d_ref, sg_device_destroy); scsi_device_put(device); module_put(THIS_MODULE); -- cgit v1.3.1 From d464dac47260a33add5a206fd3289ec1216e8435 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Fri, 5 Apr 2024 07:58:10 +0200 Subject: usb: gadget: fsl: Initialize udc before using it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fsl_ep_queue() is only called by usb_ep_queue() (as ep->ops->queue()). So _ep isn't NULL. As ep->ops->queue = fsl_ep_queue, the ep was initialized by struct_ep_setup() and so ep->udc isn't NULL either. Drop the check for _ep being NULL and assign udc earlier to prevent following an uninitialized pointer in the two dev_vdbg()s in lines 878 and 882. This fixes a compiler warning when using clang and CONFIG_USB_GADGET_VERBOSE=y. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202404050227.TTvcCPBu-lkp@intel.com/ Fixes: 6025f20f16c2 ("usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240405055812.694123-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/udc/fsl_udc_core.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c index e82d03224f94..3432ebfae978 100644 --- a/drivers/usb/gadget/udc/fsl_udc_core.c +++ b/drivers/usb/gadget/udc/fsl_udc_core.c @@ -868,7 +868,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) { struct fsl_ep *ep = container_of(_ep, struct fsl_ep, ep); struct fsl_req *req = container_of(_req, struct fsl_req, req); - struct fsl_udc *udc; + struct fsl_udc *udc = ep->udc; unsigned long flags; int ret; @@ -878,7 +878,7 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) dev_vdbg(&udc->gadget.dev, "%s, bad params\n", __func__); return -EINVAL; } - if (unlikely(!_ep || !ep->ep.desc)) { + if (unlikely(!ep->ep.desc)) { dev_vdbg(&udc->gadget.dev, "%s, bad ep\n", __func__); return -EINVAL; } @@ -887,7 +887,6 @@ fsl_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags) return -EMSGSIZE; } - udc = ep->udc; if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN) return -ESHUTDOWN; -- cgit v1.3.1 From bc004f5038220b1891ef4107134ccae44be55109 Mon Sep 17 00:00:00 2001 From: Jammy Huang Date: Wed, 3 Apr 2024 17:02:46 +0800 Subject: drm/ast: Fix soft lockup There is a while-loop in ast_dp_set_on_off() that could lead to infinite-loop. This is because the register, VGACRI-Dx, checked in this API is a scratch register actually controlled by a MCU, named DPMCU, in BMC. These scratch registers are protected by scu-lock. If suc-lock is not off, DPMCU can not update these registers and then host will have soft lockup due to never updated status. DPMCU is used to control DP and relative registers to handshake with host's VGA driver. Even the most time-consuming task, DP's link training, is less than 100ms. 200ms should be enough. Signed-off-by: Jammy Huang Fixes: 594e9c04b586 ("drm/ast: Create the driver for ASPEED proprietory Display-Port") Reviewed-by: Jocelyn Falempe Reviewed-by: Thomas Zimmermann Signed-off-by: Thomas Zimmermann Cc: KuoHsiang Chou Cc: Thomas Zimmermann Cc: Dave Airlie Cc: Jocelyn Falempe Cc: dri-devel@lists.freedesktop.org Cc: # v5.19+ Link: https://patchwork.freedesktop.org/patch/msgid/20240403090246.1495487-1-jammy_huang@aspeedtech.com --- drivers/gpu/drm/ast/ast_dp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/ast/ast_dp.c b/drivers/gpu/drm/ast/ast_dp.c index ebb6d8ebd44e..1e9259416980 100644 --- a/drivers/gpu/drm/ast/ast_dp.c +++ b/drivers/gpu/drm/ast/ast_dp.c @@ -180,6 +180,7 @@ void ast_dp_set_on_off(struct drm_device *dev, bool on) { struct ast_device *ast = to_ast_device(dev); u8 video_on_off = on; + u32 i = 0; // Video On/Off ast_set_index_reg_mask(ast, AST_IO_VGACRI, 0xE3, (u8) ~AST_DP_VIDEO_ENABLE, on); @@ -192,6 +193,8 @@ void ast_dp_set_on_off(struct drm_device *dev, bool on) ASTDP_MIRROR_VIDEO_ENABLE) != video_on_off) { // wait 1 ms mdelay(1); + if (++i > 200) + break; } } } -- cgit v1.3.1 From 07ed11afb68d94eadd4ffc082b97c2331307c5ea Mon Sep 17 00:00:00 2001 From: Alex Constantino Date: Thu, 4 Apr 2024 19:14:48 +0100 Subject: Revert "drm/qxl: simplify qxl_fence_wait" This reverts commit 5a838e5d5825c85556011478abde708251cc0776. Changes from commit 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") would result in a '[TTM] Buffer eviction failed' exception whenever it reached a timeout. Due to a dependency to DMA_FENCE_WARN this also restores some code deleted by commit d72277b6c37d ("dma-buf: nuke DMA_FENCE_TRACE macros v2"). Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") Link: https://lore.kernel.org/regressions/ZTgydqRlK6WX_b29@eldamar.lan/ Reported-by: Timo Lindfors Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1054514 Signed-off-by: Alex Constantino Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20240404181448.1643-2-dreaming.about.electric.sheep@gmail.com --- drivers/gpu/drm/qxl/qxl_release.c | 50 +++++++++++++++++++++++++++++++++++---- include/linux/dma-fence.h | 7 ++++++ 2 files changed, 52 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/qxl/qxl_release.c b/drivers/gpu/drm/qxl/qxl_release.c index 368d26da0d6a..9febc8b73f09 100644 --- a/drivers/gpu/drm/qxl/qxl_release.c +++ b/drivers/gpu/drm/qxl/qxl_release.c @@ -58,16 +58,56 @@ static long qxl_fence_wait(struct dma_fence *fence, bool intr, signed long timeout) { struct qxl_device *qdev; + struct qxl_release *release; + int count = 0, sc = 0; + bool have_drawable_releases; unsigned long cur, end = jiffies + timeout; qdev = container_of(fence->lock, struct qxl_device, release_lock); + release = container_of(fence, struct qxl_release, base); + have_drawable_releases = release->type == QXL_RELEASE_DRAWABLE; - if (!wait_event_timeout(qdev->release_event, - (dma_fence_is_signaled(fence) || - (qxl_io_notify_oom(qdev), 0)), - timeout)) - return 0; +retry: + sc++; + + if (dma_fence_is_signaled(fence)) + goto signaled; + + qxl_io_notify_oom(qdev); + + for (count = 0; count < 11; count++) { + if (!qxl_queue_garbage_collect(qdev, true)) + break; + + if (dma_fence_is_signaled(fence)) + goto signaled; + } + + if (dma_fence_is_signaled(fence)) + goto signaled; + + if (have_drawable_releases || sc < 4) { + if (sc > 2) + /* back off */ + usleep_range(500, 1000); + + if (time_after(jiffies, end)) + return 0; + + if (have_drawable_releases && sc > 300) { + DMA_FENCE_WARN(fence, + "failed to wait on release %llu after spincount %d\n", + fence->context & ~0xf0000000, sc); + goto signaled; + } + goto retry; + } + /* + * yeah, original sync_obj_wait gave up after 3 spins when + * have_drawable_releases is not set. + */ +signaled: cur = jiffies; if (time_after(cur, end)) return 0; diff --git a/include/linux/dma-fence.h b/include/linux/dma-fence.h index e06bad467f55..c3f9bb6602ba 100644 --- a/include/linux/dma-fence.h +++ b/include/linux/dma-fence.h @@ -682,4 +682,11 @@ static inline bool dma_fence_is_container(struct dma_fence *fence) return dma_fence_is_array(fence) || dma_fence_is_chain(fence); } +#define DMA_FENCE_WARN(f, fmt, args...) \ + do { \ + struct dma_fence *__ff = (f); \ + pr_warn("f %llu#%llu: " fmt, __ff->context, __ff->seqno,\ + ##args); \ + } while (0) + #endif /* __LINUX_DMA_FENCE_H */ -- cgit v1.3.1 From 24cfd86433c920188ac3f02df8aba6bc4c792f4b Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Thu, 4 Apr 2024 18:30:14 +0900 Subject: ata: ahci: Add mask_port_map module parameter Commits 0077a504e1a4 ("ahci: asm1166: correct count of reported ports") and 9815e3961754 ("ahci: asm1064: correct count of reported ports") attempted to limit the ports of the ASM1166 and ASM1064 AHCI controllers to avoid long boot times caused by the fact that these adapters report a port map larger than the number of physical ports. The excess ports are "virtual" to hide port multiplier devices and probing these ports takes time. However, these commits caused a regression for users that do use PMP devices, as the ATA devices connected to the PMP cannot be scanned. These commits have thus been reverted by commit 6cd8adc3e18 ("ahci: asm1064: asm1166: don't limit reported ports") to allow the discovery of devices connected through a port multiplier. But this revert re-introduced the long boot times for users that do not use a port multiplier setup. This patch adds the mask_port_map ahci module parameter to allow users to manually specify port map masks for controllers. In the case of the ASMedia 1166 and 1064 controllers, users that do not have port multiplier devices can mask the excess virtual ports exposed by the controller to speedup port scanning, thus reducing boot time. The mask_port_map parameter accepts 2 different formats: - mask_port_map= This applies the same mask to all AHCI controllers present in the system. This format is convenient for small systems that have only a single AHCI controller. - mask_port_map==,=mask,... This applies the specified masks only to the PCI device listed. The field is a regular PCI device ID (domain:bus:dev.func). This ID can be seen following "ahci" in the kernel messages. E.g. for "ahci 0000:01:00.0: 2/2 ports implemented (port mask 0x3)", the field is "0000:01:00.0". When used, the function ahci_save_initial_config() indicates that a port map mask was applied with the message "masking port_map ...". E.g.: without a mask: modprobe ahci dmesg | grep ahci ... ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode ahci 0000:00:17.0: (0000:00:17.0) 8/8 ports implemented (port mask 0xff) With a mask: modprobe ahci mask_port_map=0000:00:17.0=0x1 dmesg | grep ahci ... ahci 0000:00:17.0: masking port_map 0xff -> 0x1 ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode ahci 0000:00:17.0: (0000:00:17.0) 1/8 ports implemented (port mask 0x1) Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel --- drivers/ata/ahci.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 85 insertions(+) (limited to 'drivers') diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 562302e2e57c..6548f10e61d9 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -666,6 +666,87 @@ static int mobile_lpm_policy = -1; module_param(mobile_lpm_policy, int, 0644); MODULE_PARM_DESC(mobile_lpm_policy, "Default LPM policy for mobile chipsets"); +static char *ahci_mask_port_map; +module_param_named(mask_port_map, ahci_mask_port_map, charp, 0444); +MODULE_PARM_DESC(mask_port_map, + "32-bits port map masks to ignore controllers ports. " + "Valid values are: " + "\"\" to apply the same mask to all AHCI controller " + "devices, and \"=,=,...\" to " + "specify different masks for the controllers specified, " + "where is the PCI ID of an AHCI controller in the " + "form \"domain:bus:dev.func\""); + +static void ahci_apply_port_map_mask(struct device *dev, + struct ahci_host_priv *hpriv, char *mask_s) +{ + unsigned int mask; + + if (kstrtouint(mask_s, 0, &mask)) { + dev_err(dev, "Invalid port map mask\n"); + return; + } + + hpriv->mask_port_map = mask; +} + +static void ahci_get_port_map_mask(struct device *dev, + struct ahci_host_priv *hpriv) +{ + char *param, *end, *str, *mask_s; + char *name; + + if (!strlen(ahci_mask_port_map)) + return; + + str = kstrdup(ahci_mask_port_map, GFP_KERNEL); + if (!str) + return; + + /* Handle single mask case */ + if (!strchr(str, '=')) { + ahci_apply_port_map_mask(dev, hpriv, str); + goto free; + } + + /* + * Mask list case: parse the parameter to apply the mask only if + * the device name matches. + */ + param = str; + end = param + strlen(param); + while (param && param < end && *param) { + name = param; + param = strchr(name, '='); + if (!param) + break; + + *param = '\0'; + param++; + if (param >= end) + break; + + if (strcmp(dev_name(dev), name) != 0) { + param = strchr(param, ','); + if (param) + param++; + continue; + } + + mask_s = param; + param = strchr(mask_s, ','); + if (param) { + *param = '\0'; + param++; + } + + ahci_apply_port_map_mask(dev, hpriv, mask_s); + } + +free: + kfree(str); +} + static void ahci_pci_save_initial_config(struct pci_dev *pdev, struct ahci_host_priv *hpriv) { @@ -688,6 +769,10 @@ static void ahci_pci_save_initial_config(struct pci_dev *pdev, "Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n"); } + /* Handle port map masks passed as module parameter. */ + if (ahci_mask_port_map) + ahci_get_port_map_mask(&pdev->dev, hpriv); + ahci_save_initial_config(&pdev->dev, hpriv); } -- cgit v1.3.1 From 648dae58a830ecceea3b1bebf68432435980f137 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Apr 2024 08:47:12 -0700 Subject: cxl: Remove checking of iter in cxl_endpoint_get_perf_coordinates() The while() loop in cxl_endpoint_get_perf_coordinates() checks to see if 'iter' is valid as part of the condition breaking out of the loop. is_cxl_root() will stop the loop before the next iteration could go NULL. Remove the iter check. The presence of the iter or removing the iter does not impact the behavior of the code. This is a code clean up and not a bug fix. Reviewed-by: Jonathan Cameron Reviewed-by: Davidlohr Bueso Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240403154844.3403859-2-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/core/port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 2b0cab556072..6cbde50a742b 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2197,7 +2197,7 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, * port each iteration. If the parent is cxl root then there is * nothing to gather. */ - while (iter && !is_cxl_root(to_cxl_port(iter->dev.parent))) { + while (!is_cxl_root(to_cxl_port(iter->dev.parent))) { cxl_coordinates_combine(&c, &c, &dport->sw_coord); c.write_latency += dport->link_latency; c.read_latency += dport->link_latency; -- cgit v1.3.1 From 838ae9f45c4e43b4633d8b0ad1fbedff9ecf177d Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Sat, 30 Mar 2024 07:12:03 -0700 Subject: nouveau/gsp: Avoid addressing beyond end of rpc->entries Using the end of rpc->entries[] for addressing runs into both compile-time and run-time detection of accessing beyond the end of the array. Use the base pointer instead, since was allocated with the additional bytes for storing the strings. Avoids the following warning in future GCC releases with support for __counted_by: In function 'fortify_memcpy_chk', inlined from 'r535_gsp_rpc_set_registry' at ../drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c:1123:3: ../include/linux/fortify-string.h:553:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning] 553 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ for this code: strings = (char *)&rpc->entries[NV_GSP_REG_NUM_ENTRIES]; ... memcpy(strings, r535_registry_entries[i].name, name_len); Signed-off-by: Kees Cook Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240330141159.work.063-kees@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c index 9994cbd6f1c4..9858c1438aa7 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/gsp/r535.c @@ -1112,7 +1112,7 @@ r535_gsp_rpc_set_registry(struct nvkm_gsp *gsp) rpc->numEntries = NV_GSP_REG_NUM_ENTRIES; str_offset = offsetof(typeof(*rpc), entries[NV_GSP_REG_NUM_ENTRIES]); - strings = (char *)&rpc->entries[NV_GSP_REG_NUM_ENTRIES]; + strings = (char *)rpc + str_offset; for (i = 0; i < NV_GSP_REG_NUM_ENTRIES; i++) { int name_len = strlen(r535_registry_entries[i].name) + 1; -- cgit v1.3.1 From 185fdb4697cc9684a02f2fab0530ecdd0c2f15d4 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 4 Apr 2024 18:02:25 +0200 Subject: nouveau: fix function cast warning Calling a function through an incompatible pointer type causes breaks kcfi, so clang warns about the assignment: drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c:73:10: error: cast from 'void (*)(const void *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 73 | .fini = (void(*)(void *))kfree, Avoid this with a trivial wrapper. Fixes: c39f472e9f14 ("drm/nouveau: remove symlinks, move core/ to nvkm/ (no code changes)") Signed-off-by: Arnd Bergmann Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240404160234.2923554-1-arnd@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c index 4bf486b57101..cb05f7f48a98 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadowof.c @@ -66,11 +66,16 @@ of_init(struct nvkm_bios *bios, const char *name) return ERR_PTR(-EINVAL); } +static void of_fini(void *p) +{ + kfree(p); +} + const struct nvbios_source nvbios_of = { .name = "OpenFirmware", .init = of_init, - .fini = (void(*)(void *))kfree, + .fini = of_fini, .read = of_read, .size = of_size, .rw = false, -- cgit v1.3.1 From 0c3b532ad3fbf82884a2e7e83e37c7dcdd4d1d99 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 5 Apr 2024 19:25:21 +0300 Subject: gpio: wcove: Use -ENOTSUPP consistently The GPIO library expects the drivers to return -ENOTSUPP in some cases and not using analogue POSIX code. Make the driver to follow this. Reviewed-by: Kuppuswamy Sathyanarayanan Signed-off-by: Andy Shevchenko --- drivers/gpio/gpio-wcove.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-wcove.c b/drivers/gpio/gpio-wcove.c index c18b6b47384f..94ca9d03c094 100644 --- a/drivers/gpio/gpio-wcove.c +++ b/drivers/gpio/gpio-wcove.c @@ -104,7 +104,7 @@ static inline int to_reg(int gpio, enum ctrl_register type) unsigned int reg = type == CTRL_IN ? GPIO_IN_CTRL_BASE : GPIO_OUT_CTRL_BASE; if (gpio >= WCOVE_GPIO_NUM) - return -EOPNOTSUPP; + return -ENOTSUPP; return reg + gpio; } -- cgit v1.3.1 From ace0ebe5c98d66889f19e0f30e2518d0c58d0e04 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Fri, 5 Apr 2024 19:26:22 +0300 Subject: gpio: crystalcove: Use -ENOTSUPP consistently The GPIO library expects the drivers to return -ENOTSUPP in some cases and not using analogue POSIX code. Make the driver to follow this. Signed-off-by: Andy Shevchenko --- drivers/gpio/gpio-crystalcove.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpio/gpio-crystalcove.c b/drivers/gpio/gpio-crystalcove.c index 1ee62cd58582..25db014494a4 100644 --- a/drivers/gpio/gpio-crystalcove.c +++ b/drivers/gpio/gpio-crystalcove.c @@ -92,7 +92,7 @@ static inline int to_reg(int gpio, enum ctrl_register reg_type) case 0x5e: return GPIOPANELCTL; default: - return -EOPNOTSUPP; + return -ENOTSUPP; } } -- cgit v1.3.1 From d3bbc4dfcc8d436b1e27a0bb6a5893b090fc1cab Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Tue, 26 Mar 2024 22:23:24 +0100 Subject: drm/msm: fix the `CRASHDUMP_READ` target of `a6xx_get_shader_block()` Clang 14 in an (essentially) defconfig arm64 build for next-20240326 reports [1]: drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c:843:6: error: variable 'out' set but not used [-Werror,-Wunused-but-set-variable] The variable `out` in these functions is meant to compute the `target` of `CRASHDUMP_READ()`, but in this case only the initial value (`dumper->iova + A6XX_CD_DATA_OFFSET`) was being passed. Thus use `out` as it was intended by Connor [2]. There was an alternative patch at [3] that removed the variable altogether, but that would only use the initial value. Fixes: 64d6255650d4 ("drm/msm: More fully implement devcoredump for a7xx") Closes: https://lore.kernel.org/lkml/CANiq72mjc5t4n25SQvYSrOEhxxpXYPZ4pPzneSJHEnc3qApu2Q@mail.gmail.com/ [1] Link: https://lore.kernel.org/lkml/CACu1E7HhCKMJd6fixZSPiNAz6ekoZnkMTHTcLFVmbZ-9VoLxKg@mail.gmail.com/ [2] Link: https://lore.kernel.org/lkml/20240307093727.1978126-1-colin.i.king@gmail.com/ [3] Signed-off-by: Miguel Ojeda Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/584955/ Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c index 1f5245fc2cdc..a847a0f7a73c 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu_state.c @@ -852,7 +852,7 @@ static void a6xx_get_shader_block(struct msm_gpu *gpu, (block->type << 8) | i); in += CRASHDUMP_READ(in, REG_A6XX_HLSQ_DBG_AHB_READ_APERTURE, - block->size, dumper->iova + A6XX_CD_DATA_OFFSET); + block->size, out); out += block->size * sizeof(u32); } -- cgit v1.3.1 From 9dc23cba0927d09cb481da064c8413eb9df42e2b Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Thu, 28 Mar 2024 09:02:45 +0100 Subject: drm/msm/adreno: Set highest_bank_bit for A619 The default highest_bank_bit of 15 didn't seem to cause issues so far but downstream defines it to be 14. But similar to [0] leaving it on 14 (or 15 for that matter) causes some corruption issues with some resolutions with DisplayPort, like 1920x1200. So set it to 13 for now so that there's no screen corruption. [0] commit 6a0dbcd20ef2 ("drm/msm/a6xx: set highest_bank_bit to 13 for a610") Fixes: b7616b5c69e6 ("drm/msm/adreno: Add A619 support") Signed-off-by: Luca Weiss Patchwork: https://patchwork.freedesktop.org/patch/585215/ Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/adreno/a6xx_gpu.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c index 0674aca0f8a3..cf0b1de1c071 100644 --- a/drivers/gpu/drm/msm/adreno/a6xx_gpu.c +++ b/drivers/gpu/drm/msm/adreno/a6xx_gpu.c @@ -1377,6 +1377,10 @@ static void a6xx_calc_ubwc_config(struct adreno_gpu *gpu) if (adreno_is_a618(gpu)) gpu->ubwc_config.highest_bank_bit = 14; + if (adreno_is_a619(gpu)) + /* TODO: Should be 14 but causes corruption at e.g. 1920x1200 on DP */ + gpu->ubwc_config.highest_bank_bit = 13; + if (adreno_is_a619_holi(gpu)) gpu->ubwc_config.highest_bank_bit = 13; -- cgit v1.3.1 From 97a54ef596c3fd24ec2b227ba8aaf2cf5415e779 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Thu, 15 Feb 2024 15:39:43 +0100 Subject: scsi: target: Fix SELinux error when systemd-modules loads the target module If the systemd-modules service loads the target module, the credentials of that userspace process will be used to validate the access to the target db directory. SELinux will prevent it, reporting an error like the following: kernel: audit: type=1400 audit(1676301082.205:4): avc: denied { read } for pid=1020 comm="systemd-modules" name="target" dev="dm-3" ino=4657583 scontext=system_u:system_r:systemd_modules_load_t:s0 tcontext=system_u:object_r:targetd_etc_rw_t:s0 tclass=dir permissive=0 Fix the error by using the kernel credentials to access the db directory Signed-off-by: Maurizio Lombardi Link: https://lore.kernel.org/r/20240215143944.847184-2-mlombard@redhat.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen --- drivers/target/target_core_configfs.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers') diff --git a/drivers/target/target_core_configfs.c b/drivers/target/target_core_configfs.c index c1fbcdd16182..c40217f44b1b 100644 --- a/drivers/target/target_core_configfs.c +++ b/drivers/target/target_core_configfs.c @@ -3672,6 +3672,8 @@ static int __init target_core_init_configfs(void) { struct configfs_subsystem *subsys = &target_core_fabrics; struct t10_alua_lu_gp *lu_gp; + struct cred *kern_cred; + const struct cred *old_cred; int ret; pr_debug("TARGET_CORE[0]: Loading Generic Kernel Storage" @@ -3748,11 +3750,21 @@ static int __init target_core_init_configfs(void) if (ret < 0) goto out; + /* We use the kernel credentials to access the target directory */ + kern_cred = prepare_kernel_cred(&init_task); + if (!kern_cred) { + ret = -ENOMEM; + goto out; + } + old_cred = override_creds(kern_cred); target_init_dbroot(); + revert_creds(old_cred); + put_cred(kern_cred); return 0; out: + target_xcopy_release_pt(); configfs_unregister_subsystem(subsys); core_dev_release_virtual_lun0(); rd_module_exit(); -- cgit v1.3.1 From 358e919a351f2ea4b412e7dac6b1c23ec10bd4f5 Mon Sep 17 00:00:00 2001 From: Xiang Chen Date: Tue, 2 Apr 2024 11:55:12 +0800 Subject: scsi: hisi_sas: Handle the NCQ error returned by D2H frame We find that some disks use D2H frame instead of SDB frame to return NCQ error. Currently, only the I/O corresponding to the D2H frame is processed in this scenario, which does not meet the processing requirements of the NCQ error scenario. So we set dev_status to HISI_SAS_DEV_NCQ_ERR and abort all I/Os of the disk in this scenario. Co-developed-by: Xingui Yang Signed-off-by: Xingui Yang Signed-off-by: Xiang Chen Link: https://lore.kernel.org/r/20240402035513.2024241-2-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 7d2a33514538..34f96cc35342 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2244,7 +2244,15 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && (sipc_rx_err_type & RX_FIS_STATUS_ERR_MSK)) { - ts->stat = SAS_PROTO_RESPONSE; + if (task->ata_task.use_ncq) { + struct domain_device *device = task->dev; + struct hisi_sas_device *sas_dev = device->lldd_dev; + + sas_dev->dev_status = HISI_SAS_DEV_NCQ_ERR; + slot->abort = 1; + } else { + ts->stat = SAS_PROTO_RESPONSE; + } } else if (dma_rx_err_type & RX_DATA_LEN_UNDERFLOW_MSK) { ts->residual = trans_tx_fail_type; ts->stat = SAS_DATA_UNDERRUN; -- cgit v1.3.1 From 0098c55e0881f0b32591f2110410d5c8b7f9bd5a Mon Sep 17 00:00:00 2001 From: Xiang Chen Date: Tue, 2 Apr 2024 11:55:13 +0800 Subject: scsi: hisi_sas: Modify the deadline for ata_wait_after_reset() We found that the second parameter of function ata_wait_after_reset() is incorrectly used. We call smp_ata_check_ready_type() to poll the device type until the 30s timeout, so the correct deadline should be (jiffies + 30000). Fixes: 3c2673a09cf1 ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset") Co-developed-by: xiabing Signed-off-by: xiabing Co-developed-by: Yihang Li Signed-off-by: Yihang Li Signed-off-by: Xiang Chen Link: https://lore.kernel.org/r/20240402035513.2024241-3-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen --- drivers/scsi/hisi_sas/hisi_sas_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index 097dfe4b620d..35f8e00850d6 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -1797,7 +1797,7 @@ static int hisi_sas_debug_I_T_nexus_reset(struct domain_device *device) if (dev_is_sata(device)) { struct ata_link *link = &device->sata_dev.ap->link; - rc = ata_wait_after_reset(link, HISI_SAS_WAIT_PHYUP_TIMEOUT, + rc = ata_wait_after_reset(link, jiffies + HISI_SAS_WAIT_PHYUP_TIMEOUT, smp_ata_check_ready_type); } else { msleep(2000); -- cgit v1.3.1 From 4406e4176f47177f5e51b4cc7e6a7a2ff3dbfbbd Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 2 Apr 2024 12:56:54 +0300 Subject: scsi: qla2xxx: Fix off by one in qla_edif_app_getstats() The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption. Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/5c125b2f-92dd-412b-9b6f-fc3a3207bd60@moroto.mountain Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen --- drivers/scsi/qla2xxx/qla_edif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/scsi/qla2xxx/qla_edif.c b/drivers/scsi/qla2xxx/qla_edif.c index 26e6b3e3af43..dcde55c8ee5d 100644 --- a/drivers/scsi/qla2xxx/qla_edif.c +++ b/drivers/scsi/qla2xxx/qla_edif.c @@ -1100,7 +1100,7 @@ qla_edif_app_getstats(scsi_qla_host_t *vha, struct bsg_job *bsg_job) list_for_each_entry_safe(fcport, tf, &vha->vp_fcports, list) { if (fcport->edif.enable) { - if (pcnt > app_req.num_ports) + if (pcnt >= app_req.num_ports) break; app_reply->elem[pcnt].rekey_count = -- cgit v1.3.1 From 059a49aa2e25c58f90b50151f109dd3c4cdb3a47 Mon Sep 17 00:00:00 2001 From: Breno Leitao Date: Wed, 3 Apr 2024 08:43:12 -0700 Subject: virtio_net: Do not send RSS key if it is not supported There is a bug when setting the RSS options in virtio_net that can break the whole machine, getting the kernel into an infinite loop. Running the following command in any QEMU virtual machine with virtionet will reproduce this problem: # ethtool -X eth0 hfunc toeplitz This is how the problem happens: 1) ethtool_set_rxfh() calls virtnet_set_rxfh() 2) virtnet_set_rxfh() calls virtnet_commit_rss_command() 3) virtnet_commit_rss_command() populates 4 entries for the rss scatter-gather 4) Since the command above does not have a key, then the last scatter-gatter entry will be zeroed, since rss_key_size == 0. sg_buf_size = vi->rss_key_size; 5) This buffer is passed to qemu, but qemu is not happy with a buffer with zero length, and do the following in virtqueue_map_desc() (QEMU function): if (!sz) { virtio_error(vdev, "virtio: zero sized buffers are not allowed"); 6) virtio_error() (also QEMU function) set the device as broken vdev->broken = true; 7) Qemu bails out, and do not repond this crazy kernel. 8) The kernel is waiting for the response to come back (function virtnet_send_command()) 9) The kernel is waiting doing the following : while (!virtqueue_get_buf(vi->cvq, &tmp) && !virtqueue_is_broken(vi->cvq)) cpu_relax(); 10) None of the following functions above is true, thus, the kernel loops here forever. Keeping in mind that virtqueue_is_broken() does not look at the qemu `vdev->broken`, so, it never realizes that the vitio is broken at QEMU side. Fix it by not sending RSS commands if the feature is not available in the device. Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.") Cc: stable@vger.kernel.org Cc: qemu-devel@nongnu.org Signed-off-by: Breno Leitao Reviewed-by: Heng Qi Reviewed-by: Xuan Zhuo Signed-off-by: David S. Miller --- drivers/net/virtio_net.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index c22d1118a133..115c3c5414f2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -3807,6 +3807,7 @@ static int virtnet_set_rxfh(struct net_device *dev, struct netlink_ext_ack *extack) { struct virtnet_info *vi = netdev_priv(dev); + bool update = false; int i; if (rxfh->hfunc != ETH_RSS_HASH_NO_CHANGE && @@ -3814,13 +3815,28 @@ static int virtnet_set_rxfh(struct net_device *dev, return -EOPNOTSUPP; if (rxfh->indir) { + if (!vi->has_rss) + return -EOPNOTSUPP; + for (i = 0; i < vi->rss_indir_table_size; ++i) vi->ctrl->rss.indirection_table[i] = rxfh->indir[i]; + update = true; } - if (rxfh->key) + + if (rxfh->key) { + /* If either _F_HASH_REPORT or _F_RSS are negotiated, the + * device provides hash calculation capabilities, that is, + * hash_key is configured. + */ + if (!vi->has_rss && !vi->has_rss_hash_report) + return -EOPNOTSUPP; + memcpy(vi->ctrl->rss.key, rxfh->key, vi->rss_key_size); + update = true; + } - virtnet_commit_rss_command(vi); + if (update) + virtnet_commit_rss_command(vi); return 0; } @@ -4729,13 +4745,15 @@ static int virtnet_probe(struct virtio_device *vdev) if (virtio_has_feature(vdev, VIRTIO_NET_F_HASH_REPORT)) vi->has_rss_hash_report = true; - if (virtio_has_feature(vdev, VIRTIO_NET_F_RSS)) + if (virtio_has_feature(vdev, VIRTIO_NET_F_RSS)) { vi->has_rss = true; - if (vi->has_rss || vi->has_rss_hash_report) { vi->rss_indir_table_size = virtio_cread16(vdev, offsetof(struct virtio_net_config, rss_max_indirection_table_length)); + } + + if (vi->has_rss || vi->has_rss_hash_report) { vi->rss_key_size = virtio_cread8(vdev, offsetof(struct virtio_net_config, rss_max_key_size)); -- cgit v1.3.1 From bccb798e07f8bb8b91212fe8ed1e421685449076 Mon Sep 17 00:00:00 2001 From: Hariprasad Kelam Date: Thu, 4 Apr 2024 16:54:27 +0530 Subject: octeontx2-pf: Fix transmit scheduler resource leak Inorder to support shaping and scheduling, Upon class creation Netdev driver allocates trasmit schedulers. The previous patch which added support for Round robin scheduling has a bug due to which driver is not freeing transmit schedulers post class deletion. This patch fixes the same. Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling") Signed-off-by: Hariprasad Kelam Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/qos.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c b/drivers/net/ethernet/marvell/octeontx2/nic/qos.c index 1e77bbf5d22a..1723e9912ae0 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/qos.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/qos.c @@ -382,6 +382,7 @@ static void otx2_qos_read_txschq_cfg_tl(struct otx2_qos_node *parent, otx2_qos_read_txschq_cfg_tl(node, cfg); cnt = cfg->static_node_pos[node->level]; cfg->schq_contig_list[node->level][cnt] = node->schq; + cfg->schq_index_used[node->level][cnt] = true; cfg->schq_contig[node->level]++; cfg->static_node_pos[node->level]++; otx2_qos_read_txschq_cfg_schq(node, cfg); -- cgit v1.3.1 From 8358a76cfb47c9a5af627a0c4e7168aa14fa25f6 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 11:41:55 -0700 Subject: clk: Remove prepare_lock hold assertion in __clk_release() Removing this assertion lets us move the kref_put() call outside the prepare_lock section. We don't need to hold the prepare_lock here to free memory and destroy the clk_core structure. We've already unlinked the clk from the clk tree and by the time the release function runs nothing holds a reference to the clk_core anymore so anything with the pointer can't access the memory that's being freed anyway. Way back in commit 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock") we didn't need to have this assertion either. Fixes: 496eadf821c2 ("clk: Use lockdep asserts to find missing hold of prepare_lock") Cc: Krzysztof Kozlowski Reviewed-by: Douglas Anderson Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240325184204.745706-2-sboyd@kernel.org --- drivers/clk/clk.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 25371c91a58f..fed20641822c 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -4375,8 +4375,6 @@ static void __clk_release(struct kref *ref) { struct clk_core *core = container_of(ref, struct clk_core, ref); - lockdep_assert_held(&prepare_lock); - clk_core_free_parent_map(core); kfree_const(core->name); kfree(core); -- cgit v1.3.1 From 6f63af7511e7058f3fa4ad5b8102210741c9f947 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 11:41:56 -0700 Subject: clk: Don't hold prepare_lock when calling kref_put() We don't need to hold the prepare_lock when dropping a ref on a struct clk_core. The release function is only freeing memory and any code with a pointer reference has already unlinked anything pointing to the clk_core. This reduces the holding area of the prepare_lock a bit. Note that we also don't call free_clk() with the prepare_lock held. There isn't any reason to do that. Reviewed-by: Douglas Anderson Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240325184204.745706-3-sboyd@kernel.org --- drivers/clk/clk.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index fed20641822c..e950d0cf6b2f 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -4470,7 +4470,8 @@ void clk_unregister(struct clk *clk) if (ops == &clk_nodrv_ops) { pr_err("%s: unregistered clock: %s\n", __func__, clk->core->name); - goto unlock; + clk_prepare_unlock(); + return; } /* * Assign empty clock ops for consumers that might still hold @@ -4504,11 +4505,10 @@ void clk_unregister(struct clk *clk) if (clk->core->protect_count) pr_warn("%s: unregistering protected clock: %s\n", __func__, clk->core->name); + clk_prepare_unlock(); kref_put(&clk->core->ref, __clk_release); free_clk(clk); -unlock: - clk_prepare_unlock(); } EXPORT_SYMBOL_GPL(clk_unregister); @@ -4667,13 +4667,11 @@ void __clk_put(struct clk *clk) if (clk->min_rate > 0 || clk->max_rate < ULONG_MAX) clk_set_rate_range_nolock(clk, 0, ULONG_MAX); - owner = clk->core->owner; - kref_put(&clk->core->ref, __clk_release); - clk_prepare_unlock(); + owner = clk->core->owner; + kref_put(&clk->core->ref, __clk_release); module_put(owner); - free_clk(clk); } -- cgit v1.3.1 From 9d05ae531c2cff20d5d527f04e28d28e04379929 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 11:41:57 -0700 Subject: clk: Initialize struct clk_core kref earlier Initialize this kref once we allocate memory for the struct clk_core so that we can reuse the release function to free any memory associated with the structure. This mostly consolidates code, but also clarifies that the kref lifetime exists once the container structure (struct clk_core) is allocated instead of leaving it in a half-baked state for most of __clk_core_init(). Reviewed-by: Douglas Anderson Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240325184204.745706-4-sboyd@kernel.org --- drivers/clk/clk.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index e950d0cf6b2f..8b35ca32f45e 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -3981,8 +3981,6 @@ static int __clk_core_init(struct clk_core *core) } clk_core_reparent_orphans_nolock(); - - kref_init(&core->ref); out: clk_pm_runtime_put(core); unlock: @@ -4211,6 +4209,16 @@ static void clk_core_free_parent_map(struct clk_core *core) kfree(core->parents); } +/* Free memory allocated for a struct clk_core */ +static void __clk_release(struct kref *ref) +{ + struct clk_core *core = container_of(ref, struct clk_core, ref); + + clk_core_free_parent_map(core); + kfree_const(core->name); + kfree(core); +} + static struct clk * __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw) { @@ -4231,6 +4239,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw) goto fail_out; } + kref_init(&core->ref); + core->name = kstrdup_const(init->name, GFP_KERNEL); if (!core->name) { ret = -ENOMEM; @@ -4285,12 +4295,10 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw) hw->clk = NULL; fail_create_clk: - clk_core_free_parent_map(core); fail_parents: fail_ops: - kfree_const(core->name); fail_name: - kfree(core); + kref_put(&core->ref, __clk_release); fail_out: return ERR_PTR(ret); } @@ -4370,16 +4378,6 @@ int of_clk_hw_register(struct device_node *node, struct clk_hw *hw) } EXPORT_SYMBOL_GPL(of_clk_hw_register); -/* Free memory allocated for a clock. */ -static void __clk_release(struct kref *ref) -{ - struct clk_core *core = container_of(ref, struct clk_core, ref); - - clk_core_free_parent_map(core); - kfree_const(core->name); - kfree(core); -} - /* * Empty clk_ops for unregistered clocks. These are used temporarily * after clk_unregister() was called on a clock and until last clock -- cgit v1.3.1 From e581cf5d216289ef292d1a4036d53ce90e122469 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 11:41:58 -0700 Subject: clk: Get runtime PM before walking tree during disable_unused Doug reported [1] the following hung task: INFO: task swapper/0:1 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:swapper/0 state:D stack: 0 pid: 1 ppid: 0 flags:0x00000008 Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c rpm_resume+0xe0/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 clk_pm_runtime_get+0x30/0xb0 clk_disable_unused_subtree+0x58/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused_subtree+0x38/0x208 clk_disable_unused+0x4c/0xe4 do_one_initcall+0xcc/0x2d8 do_initcall_level+0xa4/0x148 do_initcalls+0x5c/0x9c do_basic_setup+0x24/0x30 kernel_init_freeable+0xec/0x164 kernel_init+0x28/0x120 ret_from_fork+0x10/0x20 INFO: task kworker/u16:0:9 blocked for more than 122 seconds. Not tainted 5.15.149-21875-gf795ebc40eb8 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u16:0 state:D stack: 0 pid: 9 ppid: 2 flags:0x00000008 Workqueue: events_unbound deferred_probe_work_func Call trace: __switch_to+0xf4/0x1f4 __schedule+0x418/0xb80 schedule+0x5c/0x10c schedule_preempt_disabled+0x2c/0x48 __mutex_lock+0x238/0x488 __mutex_lock_slowpath+0x1c/0x28 mutex_lock+0x50/0x74 clk_prepare_lock+0x7c/0x9c clk_core_prepare_lock+0x20/0x44 clk_prepare+0x24/0x30 clk_bulk_prepare+0x40/0xb0 mdss_runtime_resume+0x54/0x1c8 pm_generic_runtime_resume+0x30/0x44 __genpd_runtime_resume+0x68/0x7c genpd_runtime_resume+0x108/0x1f4 __rpm_callback+0x84/0x144 rpm_callback+0x30/0x88 rpm_resume+0x1f4/0x52c rpm_resume+0x178/0x52c __pm_runtime_resume+0x58/0x98 __device_attach+0xe0/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c device_add+0x644/0x814 mipi_dsi_device_register_full+0xe4/0x170 devm_mipi_dsi_device_register_full+0x28/0x70 ti_sn_bridge_probe+0x1dc/0x2c0 auxiliary_bus_probe+0x4c/0x94 really_probe+0xcc/0x2c8 __driver_probe_device+0xa8/0x130 driver_probe_device+0x48/0x110 __device_attach_driver+0xa4/0xcc bus_for_each_drv+0x8c/0xd8 __device_attach+0xf8/0x170 device_initial_probe+0x1c/0x28 bus_probe_device+0x3c/0x9c deferred_probe_work_func+0x9c/0xd8 process_one_work+0x148/0x518 worker_thread+0x138/0x350 kthread+0x138/0x1e0 ret_from_fork+0x10/0x20 The first thread is walking the clk tree and calling clk_pm_runtime_get() to power on devices required to read the clk hardware via struct clk_ops::is_enabled(). This thread holds the clk prepare_lock, and is trying to runtime PM resume a device, when it finds that the device is in the process of resuming so the thread schedule()s away waiting for the device to finish resuming before continuing. The second thread is runtime PM resuming the same device, but the runtime resume callback is calling clk_prepare(), trying to grab the prepare_lock waiting on the first thread. This is a classic ABBA deadlock. To properly fix the deadlock, we must never runtime PM resume or suspend a device with the clk prepare_lock held. Actually doing that is near impossible today because the global prepare_lock would have to be dropped in the middle of the tree, the device runtime PM resumed/suspended, and then the prepare_lock grabbed again to ensure consistency of the clk tree topology. If anything changes with the clk tree in the meantime, we've lost and will need to start the operation all over again. Luckily, most of the time we're simply incrementing or decrementing the runtime PM count on an active device, so we don't have the chance to schedule away with the prepare_lock held. Let's fix this immediate problem that can be triggered more easily by simply booting on Qualcomm sc7180. Introduce a list of clk_core structures that have been registered, or are in the process of being registered, that require runtime PM to operate. Iterate this list and call clk_pm_runtime_get() on each of them without holding the prepare_lock during clk_disable_unused(). This way we can be certain that the runtime PM state of the devices will be active and resumed so we can't schedule away while walking the clk tree with the prepare_lock held. Similarly, call clk_pm_runtime_put() without the prepare_lock held to properly drop the runtime PM reference. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. Reported-by: Douglas Anderson Closes: https://lore.kernel.org/all/20220922084322.RFC.2.I375b6b9e0a0a5348962f004beb3dafee6a12dfbb@changeid/ [1] Closes: https://issuetracker.google.com/328070191 Cc: Marek Szyprowski Cc: Ulf Hansson Cc: Krzysztof Kozlowski Fixes: 9a34b45397e5 ("clk: Add support for runtime PM") Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240325184204.745706-5-sboyd@kernel.org Reviewed-by: Douglas Anderson --- drivers/clk/clk.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++++------ 1 file changed, 105 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 8b35ca32f45e..9b907cb3ef61 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -37,6 +37,10 @@ static HLIST_HEAD(clk_root_list); static HLIST_HEAD(clk_orphan_list); static LIST_HEAD(clk_notifier_list); +/* List of registered clks that use runtime PM */ +static HLIST_HEAD(clk_rpm_list); +static DEFINE_MUTEX(clk_rpm_list_lock); + static const struct hlist_head *all_lists[] = { &clk_root_list, &clk_orphan_list, @@ -59,6 +63,7 @@ struct clk_core { struct clk_hw *hw; struct module *owner; struct device *dev; + struct hlist_node rpm_node; struct device_node *of_node; struct clk_core *parent; struct clk_parent_map *parents; @@ -122,6 +127,89 @@ static void clk_pm_runtime_put(struct clk_core *core) pm_runtime_put_sync(core->dev); } +/** + * clk_pm_runtime_get_all() - Runtime "get" all clk provider devices + * + * Call clk_pm_runtime_get() on all runtime PM enabled clks in the clk tree so + * that disabling unused clks avoids a deadlock where a device is runtime PM + * resuming/suspending and the runtime PM callback is trying to grab the + * prepare_lock for something like clk_prepare_enable() while + * clk_disable_unused_subtree() holds the prepare_lock and is trying to runtime + * PM resume/suspend the device as well. + * + * Context: Acquires the 'clk_rpm_list_lock' and returns with the lock held on + * success. Otherwise the lock is released on failure. + * + * Return: 0 on success, negative errno otherwise. + */ +static int clk_pm_runtime_get_all(void) +{ + int ret; + struct clk_core *core, *failed; + + /* + * Grab the list lock to prevent any new clks from being registered + * or unregistered until clk_pm_runtime_put_all(). + */ + mutex_lock(&clk_rpm_list_lock); + + /* + * Runtime PM "get" all the devices that are needed for the clks + * currently registered. Do this without holding the prepare_lock, to + * avoid the deadlock. + */ + hlist_for_each_entry(core, &clk_rpm_list, rpm_node) { + ret = clk_pm_runtime_get(core); + if (ret) { + failed = core; + pr_err("clk: Failed to runtime PM get '%s' for clk '%s'\n", + dev_name(failed->dev), failed->name); + goto err; + } + } + + return 0; + +err: + hlist_for_each_entry(core, &clk_rpm_list, rpm_node) { + if (core == failed) + break; + + clk_pm_runtime_put(core); + } + mutex_unlock(&clk_rpm_list_lock); + + return ret; +} + +/** + * clk_pm_runtime_put_all() - Runtime "put" all clk provider devices + * + * Put the runtime PM references taken in clk_pm_runtime_get_all() and release + * the 'clk_rpm_list_lock'. + */ +static void clk_pm_runtime_put_all(void) +{ + struct clk_core *core; + + hlist_for_each_entry(core, &clk_rpm_list, rpm_node) + clk_pm_runtime_put(core); + mutex_unlock(&clk_rpm_list_lock); +} + +static void clk_pm_runtime_init(struct clk_core *core) +{ + struct device *dev = core->dev; + + if (dev && pm_runtime_enabled(dev)) { + core->rpm_enabled = true; + + mutex_lock(&clk_rpm_list_lock); + hlist_add_head(&core->rpm_node, &clk_rpm_list); + mutex_unlock(&clk_rpm_list_lock); + } +} + /*** locking ***/ static void clk_prepare_lock(void) { @@ -1381,9 +1469,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core) if (core->flags & CLK_IGNORE_UNUSED) return; - if (clk_pm_runtime_get(core)) - return; - if (clk_core_is_prepared(core)) { trace_clk_unprepare(core); if (core->ops->unprepare_unused) @@ -1392,8 +1477,6 @@ static void __init clk_unprepare_unused_subtree(struct clk_core *core) core->ops->unprepare(core->hw); trace_clk_unprepare_complete(core); } - - clk_pm_runtime_put(core); } static void __init clk_disable_unused_subtree(struct clk_core *core) @@ -1409,9 +1492,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core) if (core->flags & CLK_OPS_PARENT_ENABLE) clk_core_prepare_enable(core->parent); - if (clk_pm_runtime_get(core)) - goto unprepare_out; - flags = clk_enable_lock(); if (core->enable_count) @@ -1436,8 +1516,6 @@ static void __init clk_disable_unused_subtree(struct clk_core *core) unlock_out: clk_enable_unlock(flags); - clk_pm_runtime_put(core); -unprepare_out: if (core->flags & CLK_OPS_PARENT_ENABLE) clk_core_disable_unprepare(core->parent); } @@ -1453,6 +1531,7 @@ __setup("clk_ignore_unused", clk_ignore_unused_setup); static int __init clk_disable_unused(void) { struct clk_core *core; + int ret; if (clk_ignore_unused) { pr_warn("clk: Not disabling unused clocks\n"); @@ -1461,6 +1540,13 @@ static int __init clk_disable_unused(void) pr_info("clk: Disabling unused clocks\n"); + ret = clk_pm_runtime_get_all(); + if (ret) + return ret; + /* + * Grab the prepare lock to keep the clk topology stable while iterating + * over clks. + */ clk_prepare_lock(); hlist_for_each_entry(core, &clk_root_list, child_node) @@ -1477,6 +1563,8 @@ static int __init clk_disable_unused(void) clk_prepare_unlock(); + clk_pm_runtime_put_all(); + return 0; } late_initcall_sync(clk_disable_unused); @@ -4214,6 +4302,12 @@ static void __clk_release(struct kref *ref) { struct clk_core *core = container_of(ref, struct clk_core, ref); + if (core->rpm_enabled) { + mutex_lock(&clk_rpm_list_lock); + hlist_del(&core->rpm_node); + mutex_unlock(&clk_rpm_list_lock); + } + clk_core_free_parent_map(core); kfree_const(core->name); kfree(core); @@ -4253,9 +4347,8 @@ __clk_register(struct device *dev, struct device_node *np, struct clk_hw *hw) } core->ops = init->ops; - if (dev && pm_runtime_enabled(dev)) - core->rpm_enabled = true; core->dev = dev; + clk_pm_runtime_init(core); core->of_node = np; if (dev && dev->driver) core->owner = dev->driver->owner; -- cgit v1.3.1 From 9d1e795f754db1ac3344528b7af0b17b8146f321 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Mon, 25 Mar 2024 11:41:59 -0700 Subject: clk: Get runtime PM before walking tree for clk_summary Similar to the previous commit, we should make sure that all devices are runtime resumed before printing the clk_summary through debugfs. Failure to do so would result in a deadlock if the thread is resuming a device to print clk state and that device is also runtime resuming in another thread, e.g the screen is turning on and the display driver is starting up. We remove the calls to clk_pm_runtime_{get,put}() in this path because they're superfluous now that we know the devices are runtime resumed. This also squashes a bug where the return value of clk_pm_runtime_get() wasn't checked, leading to an RPM count underflow on error paths. Fixes: 1bb294a7981c ("clk: Enable/Disable runtime PM for clk_summary") Cc: Taniya Das Cc: Douglas Anderson Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20240325184204.745706-6-sboyd@kernel.org Reviewed-by: Douglas Anderson --- drivers/clk/clk.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 9b907cb3ef61..8cca52be993f 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -3340,9 +3340,7 @@ static void clk_summary_show_subtree(struct seq_file *s, struct clk_core *c, { struct clk_core *child; - clk_pm_runtime_get(c); clk_summary_show_one(s, c, level); - clk_pm_runtime_put(c); hlist_for_each_entry(child, &c->children, child_node) clk_summary_show_subtree(s, child, level + 1); @@ -3352,11 +3350,15 @@ static int clk_summary_show(struct seq_file *s, void *data) { struct clk_core *c; struct hlist_head **lists = s->private; + int ret; seq_puts(s, " enable prepare protect duty hardware connection\n"); seq_puts(s, " clock count count count rate accuracy phase cycle enable consumer id\n"); seq_puts(s, "---------------------------------------------------------------------------------------------------------------------------------------------\n"); + ret = clk_pm_runtime_get_all(); + if (ret) + return ret; clk_prepare_lock(); @@ -3365,6 +3367,7 @@ static int clk_summary_show(struct seq_file *s, void *data) clk_summary_show_subtree(s, c, 0); clk_prepare_unlock(); + clk_pm_runtime_put_all(); return 0; } @@ -3412,8 +3415,14 @@ static int clk_dump_show(struct seq_file *s, void *data) struct clk_core *c; bool first_node = true; struct hlist_head **lists = s->private; + int ret; + + ret = clk_pm_runtime_get_all(); + if (ret) + return ret; seq_putc(s, '{'); + clk_prepare_lock(); for (; *lists; lists++) { @@ -3426,6 +3435,7 @@ static int clk_dump_show(struct seq_file *s, void *data) } clk_prepare_unlock(); + clk_pm_runtime_put_all(); seq_puts(s, "}\n"); return 0; -- cgit v1.3.1 From 22e1992cf7b034db5325660e98c41ca5afa5f519 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 28 Mar 2024 10:21:47 +1000 Subject: vhost: Add smp_rmb() in vhost_vq_avail_empty() A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by Will. Otherwise, it's not ensured the available ring entries pushed by guest can be observed by vhost in time, leading to stale available ring entries fetched by vhost in vhost_get_vq_desc(), as reported by Yihuang Yu on NVidia's grace-hopper (ARM64) platform. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \ -m 4096M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=4096M \ : \ -netdev tap,id=vnet0,vhost=true \ -device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0 : guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM virtio_net virtio0: output.0:id 100 is not a head! Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch() returns true, it means there's still pending tx buffers. Since it might read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that it should be safe until vq->avail_idx is changed by commit 275bf960ac697 ("vhost: better detection of available buffers"). Fixes: 275bf960ac69 ("vhost: better detection of available buffers") Cc: # v4.11+ Reported-by: Yihuang Yu Suggested-by: Will Deacon Signed-off-by: Gavin Shan Acked-by: Jason Wang Message-Id: <20240328002149.1141302-2-gshan@redhat.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella --- drivers/vhost/vhost.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 045f666b4f12..29df65b2ebf2 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -2799,9 +2799,19 @@ bool vhost_vq_avail_empty(struct vhost_dev *dev, struct vhost_virtqueue *vq) r = vhost_get_avail_idx(vq, &avail_idx); if (unlikely(r)) return false; + vq->avail_idx = vhost16_to_cpu(vq, avail_idx); + if (vq->avail_idx != vq->last_avail_idx) { + /* Since we have updated avail_idx, the following + * call to vhost_get_vq_desc() will read available + * ring entries. Make sure that read happens after + * the avail_idx read. + */ + smp_rmb(); + return false; + } - return vq->avail_idx == vq->last_avail_idx; + return true; } EXPORT_SYMBOL_GPL(vhost_vq_avail_empty); -- cgit v1.3.1 From df9ace7647d4123209395bb9967e998d5758c645 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Thu, 28 Mar 2024 10:21:48 +1000 Subject: vhost: Add smp_rmb() in vhost_enable_notify() A smp_rmb() has been missed in vhost_enable_notify(), inspired by Will. Otherwise, it's not ensured the available ring entries pushed by guest can be observed by vhost in time, leading to stale available ring entries fetched by vhost in vhost_get_vq_desc(), as reported by Yihuang Yu on NVidia's grace-hopper (ARM64) platform. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \ -m 4096M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=4096M \ : \ -netdev tap,id=vnet0,vhost=true \ -device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0 : guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM virtio_net virtio0: output.0:id 100 is not a head! Add the missed smp_rmb() in vhost_enable_notify(). When it returns true, it means there's still pending tx buffers. Since it might read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that it should be safe until vq->avail_idx is changed by commit d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()"). Fixes: d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()") Cc: # v5.18+ Reported-by: Yihuang Yu Suggested-by: Will Deacon Signed-off-by: Gavin Shan Acked-by: Jason Wang Message-Id: <20240328002149.1141302-3-gshan@redhat.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella --- drivers/vhost/vhost.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 29df65b2ebf2..32686c79c41d 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -2848,9 +2848,19 @@ bool vhost_enable_notify(struct vhost_dev *dev, struct vhost_virtqueue *vq) &vq->avail->idx, r); return false; } + vq->avail_idx = vhost16_to_cpu(vq, avail_idx); + if (vq->avail_idx != vq->last_avail_idx) { + /* Since we have updated avail_idx, the following + * call to vhost_get_vq_desc() will read available + * ring entries. Make sure that read happens after + * the avail_idx read. + */ + smp_rmb(); + return true; + } - return vq->avail_idx != vq->last_avail_idx; + return false; } EXPORT_SYMBOL_GPL(vhost_enable_notify); -- cgit v1.3.1 From ffe6176b7f53ca0c99355f13e14a33a40cf49406 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 31 Mar 2024 10:43:48 +0200 Subject: virtio: store owner from modules with register_virtio_driver() Modules registering driver with register_virtio_driver() might forget to set .owner field. i2c-virtio.c for example has it missing. The field is used by some other kernel parts for reference counting (try_module_get()), so it is expected that drivers will set it. Solve the problem by moving this task away from the drivers to the core virtio code, just like we did for platform_driver in commit 9447057eaff8 ("platform_device: use a macro instead of platform_driver_register"). Fixes: 3cfc88380413 ("i2c: virtio: add a virtio i2c frontend driver") Cc: "Jie Deng" Signed-off-by: Krzysztof Kozlowski Message-Id: <20240331-module-owner-virtio-v2-1-98f04bfaf46a@linaro.org> Signed-off-by: Michael S. Tsirkin --- Documentation/driver-api/virtio/writing_virtio_drivers.rst | 1 - drivers/virtio/virtio.c | 6 ++++-- include/linux/virtio.h | 7 +++++-- 3 files changed, 9 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/Documentation/driver-api/virtio/writing_virtio_drivers.rst b/Documentation/driver-api/virtio/writing_virtio_drivers.rst index e14c58796d25..e5de6f5d061a 100644 --- a/Documentation/driver-api/virtio/writing_virtio_drivers.rst +++ b/Documentation/driver-api/virtio/writing_virtio_drivers.rst @@ -97,7 +97,6 @@ like this:: static struct virtio_driver virtio_dummy_driver = { .driver.name = KBUILD_MODNAME, - .driver.owner = THIS_MODULE, .id_table = id_table, .probe = virtio_dummy_probe, .remove = virtio_dummy_remove, diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index f173587893cb..9510c551dce8 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -362,14 +362,16 @@ static const struct bus_type virtio_bus = { .remove = virtio_dev_remove, }; -int register_virtio_driver(struct virtio_driver *driver) +int __register_virtio_driver(struct virtio_driver *driver, struct module *owner) { /* Catch this early. */ BUG_ON(driver->feature_table_size && !driver->feature_table); driver->driver.bus = &virtio_bus; + driver->driver.owner = owner; + return driver_register(&driver->driver); } -EXPORT_SYMBOL_GPL(register_virtio_driver); +EXPORT_SYMBOL_GPL(__register_virtio_driver); void unregister_virtio_driver(struct virtio_driver *driver) { diff --git a/include/linux/virtio.h b/include/linux/virtio.h index b0201747a263..26c4325aa373 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -170,7 +170,7 @@ size_t virtio_max_dma_size(const struct virtio_device *vdev); /** * struct virtio_driver - operations for a virtio I/O driver - * @driver: underlying device driver (populate name and owner). + * @driver: underlying device driver (populate name). * @id_table: the ids serviced by this driver. * @feature_table: an array of feature numbers supported by this driver. * @feature_table_size: number of entries in the feature table array. @@ -208,7 +208,10 @@ static inline struct virtio_driver *drv_to_virtio(struct device_driver *drv) return container_of(drv, struct virtio_driver, driver); } -int register_virtio_driver(struct virtio_driver *drv); +/* use a macro to avoid include chaining to get THIS_MODULE */ +#define register_virtio_driver(drv) \ + __register_virtio_driver(drv, THIS_MODULE) +int __register_virtio_driver(struct virtio_driver *drv, struct module *owner); void unregister_virtio_driver(struct virtio_driver *drv); /* module_virtio_driver() - Helper macro for drivers that don't do -- cgit v1.3.1 From 76f408535aab39c33e0a1dcada9fba5631c65595 Mon Sep 17 00:00:00 2001 From: Xianting Tian Date: Mon, 11 Mar 2024 16:21:09 +0800 Subject: vhost: correct misleading printing information Guest moved avail idx not used idx when we need to print log if '(vq->avail_idx - last_avail_idx) > vq->num', so fix it. Signed-off-by: Xianting Tian Message-Id: <20240311082109.46773-1-xianting.tian@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin --- drivers/vhost/vhost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 32686c79c41d..8995730ce0bf 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -2515,7 +2515,7 @@ int vhost_get_vq_desc(struct vhost_virtqueue *vq, vq->avail_idx = vhost16_to_cpu(vq, avail_idx); if (unlikely((u16)(vq->avail_idx - last_avail_idx) > vq->num)) { - vq_err(vq, "Guest moved used index from %u to %u", + vq_err(vq, "Guest moved avail index from %u to %u", last_avail_idx, vq->avail_idx); return -EFAULT; } -- cgit v1.3.1 From f0cf7ffcd02953c72fed5995378805883d16203e Mon Sep 17 00:00:00 2001 From: "Wachowski, Karol" Date: Tue, 2 Apr 2024 12:49:22 +0200 Subject: accel/ivpu: Check return code of ipc->lock init Return value of drmm_mutex_init(ipc->lock) was unchecked. Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages") Cc: # v6.3+ Signed-off-by: Wachowski, Karol Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_ipc.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_ipc.c b/drivers/accel/ivpu/ivpu_ipc.c index 04ac4b9840fb..56ff067f63e2 100644 --- a/drivers/accel/ivpu/ivpu_ipc.c +++ b/drivers/accel/ivpu/ivpu_ipc.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020-2023 Intel Corporation + * Copyright (C) 2020-2024 Intel Corporation */ #include @@ -501,7 +501,11 @@ int ivpu_ipc_init(struct ivpu_device *vdev) spin_lock_init(&ipc->cons_lock); INIT_LIST_HEAD(&ipc->cons_list); INIT_LIST_HEAD(&ipc->cb_msg_list); - drmm_mutex_init(&vdev->drm, &ipc->lock); + ret = drmm_mutex_init(&vdev->drm, &ipc->lock); + if (ret) { + ivpu_err(vdev, "Failed to initialize ipc->lock, ret %d\n", ret); + goto err_free_rx; + } ivpu_ipc_reset(vdev); return 0; -- cgit v1.3.1 From e3caadf1f9dfc9d62b5ffc3bd73ebac0c8f26b3f Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Tue, 2 Apr 2024 12:49:23 +0200 Subject: accel/ivpu: Remove d3hot_after_power_off WA Always enter D3hot after entering D0i3 an all platforms. This minimizes power usage. Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_drv.c | 20 ++++++++++---------- drivers/accel/ivpu/ivpu_drv.h | 3 +-- drivers/accel/ivpu/ivpu_hw_37xx.c | 4 +--- drivers/accel/ivpu/ivpu_pm.c | 7 ++----- 4 files changed, 14 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c index 39f6d1b98fd6..303d92753387 100644 --- a/drivers/accel/ivpu/ivpu_drv.c +++ b/drivers/accel/ivpu/ivpu_drv.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020-2023 Intel Corporation + * Copyright (C) 2020-2024 Intel Corporation */ #include @@ -387,12 +387,15 @@ int ivpu_shutdown(struct ivpu_device *vdev) { int ret; - ivpu_prepare_for_reset(vdev); + /* Save PCI state before powering down as it sometimes gets corrupted if NPU hangs */ + pci_save_state(to_pci_dev(vdev->drm.dev)); ret = ivpu_hw_power_down(vdev); if (ret) ivpu_warn(vdev, "Failed to power down HW: %d\n", ret); + pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot); + return ret; } @@ -560,11 +563,11 @@ static int ivpu_dev_init(struct ivpu_device *vdev) /* Power up early so the rest of init code can access VPU registers */ ret = ivpu_hw_power_up(vdev); if (ret) - goto err_power_down; + goto err_shutdown; ret = ivpu_mmu_global_context_init(vdev); if (ret) - goto err_power_down; + goto err_shutdown; ret = ivpu_mmu_init(vdev); if (ret) @@ -601,10 +604,8 @@ err_mmu_rctx_fini: ivpu_mmu_reserved_context_fini(vdev); err_mmu_gctx_fini: ivpu_mmu_global_context_fini(vdev); -err_power_down: - ivpu_hw_power_down(vdev); - if (IVPU_WA(d3hot_after_power_off)) - pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot); +err_shutdown: + ivpu_shutdown(vdev); err_xa_destroy: xa_destroy(&vdev->db_xa); xa_destroy(&vdev->submitted_jobs_xa); @@ -628,9 +629,8 @@ static void ivpu_bo_unbind_all_user_contexts(struct ivpu_device *vdev) static void ivpu_dev_fini(struct ivpu_device *vdev) { ivpu_pm_disable(vdev); + ivpu_prepare_for_reset(vdev); ivpu_shutdown(vdev); - if (IVPU_WA(d3hot_after_power_off)) - pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot); ivpu_jobs_abort_all(vdev); ivpu_job_done_consumer_fini(vdev); diff --git a/drivers/accel/ivpu/ivpu_drv.h b/drivers/accel/ivpu/ivpu_drv.h index 7be0500d9bb8..bb4374d0eaec 100644 --- a/drivers/accel/ivpu/ivpu_drv.h +++ b/drivers/accel/ivpu/ivpu_drv.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0-only */ /* - * Copyright (C) 2020-2023 Intel Corporation + * Copyright (C) 2020-2024 Intel Corporation */ #ifndef __IVPU_DRV_H__ @@ -90,7 +90,6 @@ struct ivpu_wa_table { bool punit_disabled; bool clear_runtime_mem; - bool d3hot_after_power_off; bool interrupt_clear_with_0; bool disable_clock_relinquish; bool disable_d0i3_msg; diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c index 9a0c9498baba..5e2865f9f7d6 100644 --- a/drivers/accel/ivpu/ivpu_hw_37xx.c +++ b/drivers/accel/ivpu/ivpu_hw_37xx.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020-2023 Intel Corporation + * Copyright (C) 2020-2024 Intel Corporation */ #include "ivpu_drv.h" @@ -75,7 +75,6 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev) { vdev->wa.punit_disabled = false; vdev->wa.clear_runtime_mem = false; - vdev->wa.d3hot_after_power_off = true; REGB_WR32(VPU_37XX_BUTTRESS_INTERRUPT_STAT, BUTTRESS_ALL_IRQ_MASK); if (REGB_RD32(VPU_37XX_BUTTRESS_INTERRUPT_STAT) == BUTTRESS_ALL_IRQ_MASK) { @@ -86,7 +85,6 @@ static void ivpu_hw_wa_init(struct ivpu_device *vdev) IVPU_PRINT_WA(punit_disabled); IVPU_PRINT_WA(clear_runtime_mem); - IVPU_PRINT_WA(d3hot_after_power_off); IVPU_PRINT_WA(interrupt_clear_with_0); } diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index 7cce1c928a7f..9cbd7af6576b 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-only /* - * Copyright (C) 2020-2023 Intel Corporation + * Copyright (C) 2020-2024 Intel Corporation */ #include @@ -58,15 +58,12 @@ static int ivpu_suspend(struct ivpu_device *vdev) { int ret; - /* Save PCI state before powering down as it sometimes gets corrupted if NPU hangs */ - pci_save_state(to_pci_dev(vdev->drm.dev)); + ivpu_prepare_for_reset(vdev); ret = ivpu_shutdown(vdev); if (ret) ivpu_err(vdev, "Failed to shutdown VPU: %d\n", ret); - pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot); - return ret; } -- cgit v1.3.1 From 3534eacbf101f6e66105f03d869a03893407c384 Mon Sep 17 00:00:00 2001 From: "Wachowski, Karol" Date: Tue, 2 Apr 2024 12:49:24 +0200 Subject: accel/ivpu: Fix PCI D0 state entry in resume In case of failed power up we end up left in PCI D3hot state making it impossible to access NPU registers on retry. Enter D0 state on retry before proceeding with power up sequence. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: # v6.8+ Signed-off-by: Wachowski, Karol Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_pm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index 9cbd7af6576b..325b82f8d971 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -71,10 +71,10 @@ static int ivpu_resume(struct ivpu_device *vdev) { int ret; - pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D0); +retry: pci_restore_state(to_pci_dev(vdev->drm.dev)); + pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D0); -retry: ret = ivpu_hw_power_up(vdev); if (ret) { ivpu_err(vdev, "Failed to power up HW: %d\n", ret); -- cgit v1.3.1 From 875bc9cd1b33eb027a5663f5e6878a43d98e9a16 Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Tue, 2 Apr 2024 12:49:25 +0200 Subject: accel/ivpu: Put NPU back to D3hot after failed resume Put NPU in D3hot after ivpu_resume() fails to power up the device. This will assure that D3->D0 power cycle will be performed before the next resume and also will minimize power usage in this corner case. Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery") Cc: # v6.8+ Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_pm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index 325b82f8d971..ba51781b5896 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -97,6 +97,7 @@ err_mmu_disable: ivpu_mmu_disable(vdev); err_power_down: ivpu_hw_power_down(vdev); + pci_set_power_state(to_pci_dev(vdev->drm.dev), PCI_D3hot); if (!ivpu_fw_is_cold_boot(vdev)) { ivpu_pm_prepare_cold_boot(vdev); -- cgit v1.3.1 From 3556f922612caf4c9b97cf7337626f8342b3dea3 Mon Sep 17 00:00:00 2001 From: "Wachowski, Karol" Date: Tue, 2 Apr 2024 12:49:26 +0200 Subject: accel/ivpu: Improve clarity of MMU error messages This patch improves readability and clarity of MMU error messages. Previously, the error strings were somewhat confusing and could lead to ambiguous interpretations, making it difficult to diagnose issues. Signed-off-by: Wachowski, Karol Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_mmu.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_mmu.c b/drivers/accel/ivpu/ivpu_mmu.c index 91bd640655ab..2e46b322c450 100644 --- a/drivers/accel/ivpu/ivpu_mmu.c +++ b/drivers/accel/ivpu/ivpu_mmu.c @@ -278,7 +278,7 @@ static const char *ivpu_mmu_event_to_str(u32 cmd) case IVPU_MMU_EVT_F_VMS_FETCH: return "Fetch of VMS caused external abort"; default: - return "Unknown CMDQ command"; + return "Unknown event"; } } @@ -286,15 +286,15 @@ static const char *ivpu_mmu_cmdq_err_to_str(u32 err) { switch (err) { case IVPU_MMU_CERROR_NONE: - return "No CMDQ Error"; + return "No error"; case IVPU_MMU_CERROR_ILL: return "Illegal command"; case IVPU_MMU_CERROR_ABT: - return "External abort on CMDQ read"; + return "External abort on command queue read"; case IVPU_MMU_CERROR_ATC_INV_SYNC: return "Sync failed to complete ATS invalidation"; default: - return "Unknown CMDQ Error"; + return "Unknown error"; } } -- cgit v1.3.1 From c52c35e5b404b95a5bcff39af9be1b9293be3434 Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Tue, 2 Apr 2024 12:49:27 +0200 Subject: accel/ivpu: Return max freq for DRM_IVPU_PARAM_CORE_CLOCK_RATE DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which could be 0 if device was sleeping. This value isn't really useful to the user space, so return max freq instead which can be used to estimate NPU performance. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Cc: # v6.7 Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_drv.c | 18 +----------------- drivers/accel/ivpu/ivpu_hw.h | 6 ++++++ drivers/accel/ivpu/ivpu_hw_37xx.c | 7 ++++--- drivers/accel/ivpu/ivpu_hw_40xx.c | 6 ++++++ 4 files changed, 17 insertions(+), 20 deletions(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c index 303d92753387..77283daaedd1 100644 --- a/drivers/accel/ivpu/ivpu_drv.c +++ b/drivers/accel/ivpu/ivpu_drv.c @@ -131,22 +131,6 @@ static int ivpu_get_capabilities(struct ivpu_device *vdev, struct drm_ivpu_param return 0; } -static int ivpu_get_core_clock_rate(struct ivpu_device *vdev, u64 *clk_rate) -{ - int ret; - - ret = ivpu_rpm_get_if_active(vdev); - if (ret < 0) - return ret; - - *clk_rate = ret ? ivpu_hw_reg_pll_freq_get(vdev) : 0; - - if (ret) - ivpu_rpm_put(vdev); - - return 0; -} - static int ivpu_get_param_ioctl(struct drm_device *dev, void *data, struct drm_file *file) { struct ivpu_file_priv *file_priv = file->driver_priv; @@ -170,7 +154,7 @@ static int ivpu_get_param_ioctl(struct drm_device *dev, void *data, struct drm_f args->value = vdev->platform; break; case DRM_IVPU_PARAM_CORE_CLOCK_RATE: - ret = ivpu_get_core_clock_rate(vdev, &args->value); + args->value = ivpu_hw_ratio_to_freq(vdev, vdev->hw->pll.max_ratio); break; case DRM_IVPU_PARAM_NUM_CONTEXTS: args->value = ivpu_get_context_count(vdev); diff --git a/drivers/accel/ivpu/ivpu_hw.h b/drivers/accel/ivpu/ivpu_hw.h index b2909168a0a6..094c659d2800 100644 --- a/drivers/accel/ivpu/ivpu_hw.h +++ b/drivers/accel/ivpu/ivpu_hw.h @@ -21,6 +21,7 @@ struct ivpu_hw_ops { u32 (*profiling_freq_get)(struct ivpu_device *vdev); void (*profiling_freq_drive)(struct ivpu_device *vdev, bool enable); u32 (*reg_pll_freq_get)(struct ivpu_device *vdev); + u32 (*ratio_to_freq)(struct ivpu_device *vdev, u32 ratio); u32 (*reg_telemetry_offset_get)(struct ivpu_device *vdev); u32 (*reg_telemetry_size_get)(struct ivpu_device *vdev); u32 (*reg_telemetry_enable_get)(struct ivpu_device *vdev); @@ -130,6 +131,11 @@ static inline u32 ivpu_hw_reg_pll_freq_get(struct ivpu_device *vdev) return vdev->hw->ops->reg_pll_freq_get(vdev); }; +static inline u32 ivpu_hw_ratio_to_freq(struct ivpu_device *vdev, u32 ratio) +{ + return vdev->hw->ops->ratio_to_freq(vdev, ratio); +} + static inline u32 ivpu_hw_reg_telemetry_offset_get(struct ivpu_device *vdev) { return vdev->hw->ops->reg_telemetry_offset_get(vdev); diff --git a/drivers/accel/ivpu/ivpu_hw_37xx.c b/drivers/accel/ivpu/ivpu_hw_37xx.c index 5e2865f9f7d6..bd25e2d9fb0f 100644 --- a/drivers/accel/ivpu/ivpu_hw_37xx.c +++ b/drivers/accel/ivpu/ivpu_hw_37xx.c @@ -803,12 +803,12 @@ static void ivpu_hw_37xx_profiling_freq_drive(struct ivpu_device *vdev, bool ena /* Profiling freq - is a debug feature. Unavailable on VPU 37XX. */ } -static u32 ivpu_hw_37xx_pll_to_freq(u32 ratio, u32 config) +static u32 ivpu_hw_37xx_ratio_to_freq(struct ivpu_device *vdev, u32 ratio) { u32 pll_clock = PLL_REF_CLK_FREQ * ratio; u32 cpu_clock; - if ((config & 0xff) == PLL_RATIO_4_3) + if ((vdev->hw->config & 0xff) == PLL_RATIO_4_3) cpu_clock = pll_clock * 2 / 4; else cpu_clock = pll_clock * 2 / 5; @@ -827,7 +827,7 @@ static u32 ivpu_hw_37xx_reg_pll_freq_get(struct ivpu_device *vdev) if (!ivpu_is_silicon(vdev)) return PLL_SIMULATION_FREQ; - return ivpu_hw_37xx_pll_to_freq(pll_curr_ratio, vdev->hw->config); + return ivpu_hw_37xx_ratio_to_freq(vdev, pll_curr_ratio); } static u32 ivpu_hw_37xx_reg_telemetry_offset_get(struct ivpu_device *vdev) @@ -1050,6 +1050,7 @@ const struct ivpu_hw_ops ivpu_hw_37xx_ops = { .profiling_freq_get = ivpu_hw_37xx_profiling_freq_get, .profiling_freq_drive = ivpu_hw_37xx_profiling_freq_drive, .reg_pll_freq_get = ivpu_hw_37xx_reg_pll_freq_get, + .ratio_to_freq = ivpu_hw_37xx_ratio_to_freq, .reg_telemetry_offset_get = ivpu_hw_37xx_reg_telemetry_offset_get, .reg_telemetry_size_get = ivpu_hw_37xx_reg_telemetry_size_get, .reg_telemetry_enable_get = ivpu_hw_37xx_reg_telemetry_enable_get, diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c b/drivers/accel/ivpu/ivpu_hw_40xx.c index e4eddbf5d11c..b0b88d4c8926 100644 --- a/drivers/accel/ivpu/ivpu_hw_40xx.c +++ b/drivers/accel/ivpu/ivpu_hw_40xx.c @@ -980,6 +980,11 @@ static u32 ivpu_hw_40xx_reg_pll_freq_get(struct ivpu_device *vdev) return PLL_RATIO_TO_FREQ(pll_curr_ratio); } +static u32 ivpu_hw_40xx_ratio_to_freq(struct ivpu_device *vdev, u32 ratio) +{ + return PLL_RATIO_TO_FREQ(ratio); +} + static u32 ivpu_hw_40xx_reg_telemetry_offset_get(struct ivpu_device *vdev) { return REGB_RD32(VPU_40XX_BUTTRESS_VPU_TELEMETRY_OFFSET); @@ -1230,6 +1235,7 @@ const struct ivpu_hw_ops ivpu_hw_40xx_ops = { .profiling_freq_get = ivpu_hw_40xx_profiling_freq_get, .profiling_freq_drive = ivpu_hw_40xx_profiling_freq_drive, .reg_pll_freq_get = ivpu_hw_40xx_reg_pll_freq_get, + .ratio_to_freq = ivpu_hw_40xx_ratio_to_freq, .reg_telemetry_offset_get = ivpu_hw_40xx_reg_telemetry_offset_get, .reg_telemetry_size_get = ivpu_hw_40xx_reg_telemetry_size_get, .reg_telemetry_enable_get = ivpu_hw_40xx_reg_telemetry_enable_get, -- cgit v1.3.1 From 0d298e23292b7a5b58c5589fe33b96e95363214f Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Tue, 2 Apr 2024 12:49:28 +0200 Subject: accel/ivpu: Fix missed error message after VPU rename Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error messages. Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_pm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_pm.c b/drivers/accel/ivpu/ivpu_pm.c index ba51781b5896..4f5ea466731f 100644 --- a/drivers/accel/ivpu/ivpu_pm.c +++ b/drivers/accel/ivpu/ivpu_pm.c @@ -62,7 +62,7 @@ static int ivpu_suspend(struct ivpu_device *vdev) ret = ivpu_shutdown(vdev); if (ret) - ivpu_err(vdev, "Failed to shutdown VPU: %d\n", ret); + ivpu_err(vdev, "Failed to shutdown NPU: %d\n", ret); return ret; } -- cgit v1.3.1 From fd7726e75968b27fe98534ccbf47ccd6fef686f3 Mon Sep 17 00:00:00 2001 From: Jacek Lawrynowicz Date: Tue, 2 Apr 2024 12:49:29 +0200 Subject: accel/ivpu: Fix deadlock in context_xa ivpu_device->context_xa is locked both in kernel thread and IRQ context. It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization otherwise the lock could be acquired from a thread and interrupted by an IRQ that locks it for the second time causing the deadlock. This deadlock was reported by lockdep and observed in internal tests. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: # v6.3+ Signed-off-by: Jacek Lawrynowicz Reviewed-by: Jeffrey Hugo Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com --- drivers/accel/ivpu/ivpu_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/accel/ivpu/ivpu_drv.c b/drivers/accel/ivpu/ivpu_drv.c index 77283daaedd1..51d3f1a55d02 100644 --- a/drivers/accel/ivpu/ivpu_drv.c +++ b/drivers/accel/ivpu/ivpu_drv.c @@ -517,7 +517,7 @@ static int ivpu_dev_init(struct ivpu_device *vdev) vdev->context_xa_limit.min = IVPU_USER_CONTEXT_MIN_SSID; vdev->context_xa_limit.max = IVPU_USER_CONTEXT_MAX_SSID; atomic64_set(&vdev->unique_id_counter, 0); - xa_init_flags(&vdev->context_xa, XA_FLAGS_ALLOC); + xa_init_flags(&vdev->context_xa, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ); xa_init_flags(&vdev->submitted_jobs_xa, XA_FLAGS_ALLOC1); xa_init_flags(&vdev->db_xa, XA_FLAGS_ALLOC1); lockdep_set_class(&vdev->submitted_jobs_xa.xa_lock, &submitted_jobs_xa_lock_class_key); -- cgit v1.3.1 From be121ffb384f53e966ee7299ffccc6eeb61bc73d Mon Sep 17 00:00:00 2001 From: Michael Guralnik Date: Wed, 3 Apr 2024 12:03:46 +0300 Subject: RDMA/mlx5: Fix port number for counter query in multi-port configuration Set the correct port when querying PPCNT in multi-port configuration. Distinguish between cases where switchdev mode was enabled to multi-port configuration and don't overwrite the queried port to 1 in multi-port case. Fixes: 74b30b3ad5ce ("RDMA/mlx5: Set local port to one when accessing counters") Signed-off-by: Michael Guralnik Link: https://lore.kernel.org/r/9bfcc8ade958b760a51408c3ad654a01b11f7d76.1712134988.git.leon@kernel.org Signed-off-by: Leon Romanovsky --- drivers/infiniband/hw/mlx5/mad.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/infiniband/hw/mlx5/mad.c b/drivers/infiniband/hw/mlx5/mad.c index 0c3c4e64812c..3e43687a7f6f 100644 --- a/drivers/infiniband/hw/mlx5/mad.c +++ b/drivers/infiniband/hw/mlx5/mad.c @@ -188,7 +188,8 @@ static int process_pma_cmd(struct mlx5_ib_dev *dev, u32 port_num, mdev = dev->mdev; mdev_port_num = 1; } - if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1) { + if (MLX5_CAP_GEN(dev->mdev, num_ports) == 1 && + !mlx5_core_mp_enabled(mdev)) { /* set local port to one for Function-Per-Port HCA. */ mdev = dev->mdev; mdev_port_num = 1; -- cgit v1.3.1 From d8a6213d70accb403b82924a1c229e733433a5ef Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 5 Apr 2024 10:30:34 +0000 Subject: geneve: fix header validation in geneve[6]_xmit_skb syzbot is able to trigger an uninit-value in geneve_xmit() [1] Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield()) uses skb_protocol(skb, true), pskb_inet_may_pull() is only using skb->protocol. If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol, pskb_inet_may_pull() does nothing at all. If a vlan tag was provided by the caller (af_packet in the syzbot case), the network header might not point to the correct location, and skb linear part could be smaller than expected. Add skb_vlan_inet_prepare() to perform a complete mac validation. Use this in geneve for the moment, I suspect we need to adopt this more broadly. v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest - Only call __vlan_get_protocol() for vlan types. Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/ v2,v3 - Addressed Sabrina comments on v1 and v2 Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/ [1] BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline] BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 geneve_xmit_skb drivers/net/geneve.c:910 [inline] geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2199 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb") Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/ Signed-off-by: Eric Dumazet Cc: Phillip Potter Cc: Sabrina Dubroca Reviewed-by: Sabrina Dubroca Reviewed-by: Phillip Potter Signed-off-by: David S. Miller --- drivers/net/geneve.c | 4 ++-- include/net/ip_tunnels.h | 33 +++++++++++++++++++++++++++++++++ 2 files changed, 35 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c index 2f6739fe78af..6c2835086b57 100644 --- a/drivers/net/geneve.c +++ b/drivers/net/geneve.c @@ -822,7 +822,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; - if (!pskb_inet_may_pull(skb)) + if (!skb_vlan_inet_prepare(skb)) return -EINVAL; if (!gs4) @@ -929,7 +929,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev, __be16 sport; int err; - if (!pskb_inet_may_pull(skb)) + if (!skb_vlan_inet_prepare(skb)) return -EINVAL; if (!gs6) diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 5cd64bb2104d..c286cc2e766e 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -361,6 +361,39 @@ static inline bool pskb_inet_may_pull(struct sk_buff *skb) return pskb_network_may_pull(skb, nhlen); } +/* Variant of pskb_inet_may_pull(). + */ +static inline bool skb_vlan_inet_prepare(struct sk_buff *skb) +{ + int nhlen = 0, maclen = ETH_HLEN; + __be16 type = skb->protocol; + + /* Essentially this is skb_protocol(skb, true) + * And we get MAC len. + */ + if (eth_type_vlan(type)) + type = __vlan_get_protocol(skb, type, &maclen); + + switch (type) { +#if IS_ENABLED(CONFIG_IPV6) + case htons(ETH_P_IPV6): + nhlen = sizeof(struct ipv6hdr); + break; +#endif + case htons(ETH_P_IP): + nhlen = sizeof(struct iphdr); + break; + } + /* For ETH_P_IPV6/ETH_P_IP we make sure to pull + * a base network header in skb->head. + */ + if (!pskb_may_pull(skb, maclen + nhlen)) + return false; + + skb_set_network_header(skb, maclen); + return true; +} + static inline int ip_encap_hlen(struct ip_tunnel_encap *e) { const struct ip_tunnel_encap_ops *ops; -- cgit v1.3.1 From 58effa3476536215530c9ec4910ffc981613b413 Mon Sep 17 00:00:00 2001 From: Gerd Bayer Date: Fri, 5 Apr 2024 13:16:06 +0200 Subject: s390/ism: fix receive message buffer allocation Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/ Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer Signed-off-by: David S. Miller --- drivers/s390/net/ism_drv.c | 38 +++++++++++++++++++++++++++++--------- 1 file changed, 29 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index 2c8e964425dc..affb05521e14 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -14,6 +14,8 @@ #include #include #include +#include +#include #include "ism.h" @@ -292,13 +294,15 @@ out: static void ism_free_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { clear_bit(dmb->sba_idx, ism->sba_bitmap); - dma_free_coherent(&ism->pdev->dev, dmb->dmb_len, - dmb->cpu_addr, dmb->dma_addr); + dma_unmap_page(&ism->pdev->dev, dmb->dma_addr, dmb->dmb_len, + DMA_FROM_DEVICE); + folio_put(virt_to_folio(dmb->cpu_addr)); } static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { unsigned long bit; + int rc; if (PAGE_ALIGN(dmb->dmb_len) > dma_get_max_seg_size(&ism->pdev->dev)) return -EINVAL; @@ -315,14 +319,30 @@ static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) test_and_set_bit(dmb->sba_idx, ism->sba_bitmap)) return -EINVAL; - dmb->cpu_addr = dma_alloc_coherent(&ism->pdev->dev, dmb->dmb_len, - &dmb->dma_addr, - GFP_KERNEL | __GFP_NOWARN | - __GFP_NOMEMALLOC | __GFP_NORETRY); - if (!dmb->cpu_addr) - clear_bit(dmb->sba_idx, ism->sba_bitmap); + dmb->cpu_addr = + folio_address(folio_alloc(GFP_KERNEL | __GFP_NOWARN | + __GFP_NOMEMALLOC | __GFP_NORETRY, + get_order(dmb->dmb_len))); - return dmb->cpu_addr ? 0 : -ENOMEM; + if (!dmb->cpu_addr) { + rc = -ENOMEM; + goto out_bit; + } + dmb->dma_addr = dma_map_page(&ism->pdev->dev, + virt_to_page(dmb->cpu_addr), 0, + dmb->dmb_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&ism->pdev->dev, dmb->dma_addr)) { + rc = -ENOMEM; + goto out_free; + } + + return 0; + +out_free: + kfree(dmb->cpu_addr); +out_bit: + clear_bit(dmb->sba_idx, ism->sba_bitmap); + return rc; } int ism_register_dmb(struct ism_dev *ism, struct ism_dmb *dmb, -- cgit v1.3.1 From b45d0d01da542be280d935d87b71465028cdcb1f Mon Sep 17 00:00:00 2001 From: Bernhard Rosenkränzer Date: Fri, 29 Mar 2024 16:28:00 +0100 Subject: platform/x86: acer-wmi: Add support for Acer PH18-71 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add Acer Predator PH18-71 to acer_quirks with predator_v4 to support mode button and fan speed sensor. Signed-off-by: Bernhard Rosenkränzer Reviewed-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/acer-wmi.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index ee2e164f86b9..38c932df6446 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -597,6 +597,15 @@ static const struct dmi_system_id acer_quirks[] __initconst = { }, .driver_data = &quirk_acer_predator_v4, }, + { + .callback = dmi_matched, + .ident = "Acer Predator PH18-71", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "Predator PH18-71"), + }, + .driver_data = &quirk_acer_predator_v4, + }, { .callback = set_force_caps, .ident = "Acer Aspire Switch 10E SW3-016", -- cgit v1.3.1 From 7ac10c7d728d75bc9daaa8fade3c7a3273b9a9ff Mon Sep 17 00:00:00 2001 From: Vikas Gupta Date: Fri, 5 Apr 2024 16:55:11 -0700 Subject: bnxt_en: Fix possible memory leak in bnxt_rdma_aux_device_init() If ulp = kzalloc() fails, the allocated edev will leak because it is not properly assigned and the cleanup path will not be able to free it. Fix it by assigning it properly immediately after allocation. Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by: Andy Gospodarek Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index 93f9bd55020f..a5f9c9090a6b 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -392,12 +392,13 @@ void bnxt_rdma_aux_device_init(struct bnxt *bp) if (!edev) goto aux_dev_uninit; + aux_priv->edev = edev; + ulp = kzalloc(sizeof(*ulp), GFP_KERNEL); if (!ulp) goto aux_dev_uninit; edev->ulp_tbl = ulp; - aux_priv->edev = edev; bp->edev = edev; bnxt_set_edev_info(edev, bp); -- cgit v1.3.1 From b5ea7d33ba2a42b95b4298d08d2af9cdeeaf0090 Mon Sep 17 00:00:00 2001 From: Vikas Gupta Date: Fri, 5 Apr 2024 16:55:12 -0700 Subject: bnxt_en: Fix error recovery for RoCE ulp client Since runtime MSIXs vector allocation/free has been removed, the L2 driver needs to repopulate the MSIX entries for the ulp client as the irq table may change during the recovery process. Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation") Reviewed-by: Andy Gospodarek Signed-off-by: Vikas Gupta Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c index a5f9c9090a6b..195c02dc0683 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ulp.c @@ -210,6 +210,9 @@ void bnxt_ulp_start(struct bnxt *bp, int err) if (err) return; + if (edev->ulp_tbl->msix_requested) + bnxt_fill_msix_vecs(bp, edev->msix_entries); + if (aux_priv) { struct auxiliary_device *adev; -- cgit v1.3.1 From faa12ca245585379d612736a4b5e98e88481ea59 Mon Sep 17 00:00:00 2001 From: Pavan Chebbi Date: Fri, 5 Apr 2024 16:55:13 -0700 Subject: bnxt_en: Reset PTP tx_avail after possible firmware reset It is possible that during error recovery and firmware reset, there is a pending TX PTP packet waiting for the timestamp. We need to reset this condition so that after recovery, the tx_avail count for PTP is reset back to the initial value. Otherwise, we may not accept any PTP TX timestamps after recovery. Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by: Kalesh AP Signed-off-by: Pavan Chebbi Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 493b724848c8..57e61f963167 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -11758,6 +11758,8 @@ static int __bnxt_open_nic(struct bnxt *bp, bool irq_re_init, bool link_re_init) /* VF-reps may need to be re-opened after the PF is re-opened */ if (BNXT_PF(bp)) bnxt_vf_reps_open(bp); + if (bp->ptp_cfg) + atomic_set(&bp->ptp_cfg->tx_avail, BNXT_MAX_TX_TS); bnxt_ptp_init_rtc(bp, true); bnxt_ptp_cfg_tstamp_filters(bp); bnxt_cfg_usr_fltrs(bp); -- cgit v1.3.1 From dfe073f8714dc8022b5578510e2288e5292adeb5 Mon Sep 17 00:00:00 2001 From: Minda Chen Date: Mon, 8 Apr 2024 09:29:42 +0800 Subject: net: stmmac: mmc_core: Add GMAC LPI statistics XGMAC MMC has already added LPI statistics. GMAC MMC lack of these statistics. Add register definition and reading the LPI statistics from registers. Signed-off-by: Minda Chen Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index 7eb477faa75a..b0db5f4e8fe8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -79,6 +79,12 @@ #define MMC_RX_FIFO_OVERFLOW 0xd4 #define MMC_RX_VLAN_FRAMES_GB 0xd8 #define MMC_RX_WATCHDOG_ERROR 0xdc + +#define MMC_TX_LPI_USEC 0xec +#define MMC_TX_LPI_TRAN 0xf0 +#define MMC_RX_LPI_USEC 0xf4 +#define MMC_RX_LPI_TRAN 0xf8 + /* IPC*/ #define MMC_RX_IPC_INTR_MASK 0x100 #define MMC_RX_IPC_INTR 0x108 @@ -283,6 +289,8 @@ static void dwmac_mmc_read(void __iomem *mmcaddr, struct stmmac_counters *mmc) mmc->mmc_tx_excessdef += readl(mmcaddr + MMC_TX_EXCESSDEF); mmc->mmc_tx_pause_frame += readl(mmcaddr + MMC_TX_PAUSE_FRAME); mmc->mmc_tx_vlan_frame_g += readl(mmcaddr + MMC_TX_VLAN_FRAME_G); + mmc->mmc_tx_lpi_usec += readl(mmcaddr + MMC_TX_LPI_USEC); + mmc->mmc_tx_lpi_tran += readl(mmcaddr + MMC_TX_LPI_TRAN); /* MMC RX counter registers */ mmc->mmc_rx_framecount_gb += readl(mmcaddr + MMC_RX_FRAMECOUNT_GB); @@ -316,6 +324,9 @@ static void dwmac_mmc_read(void __iomem *mmcaddr, struct stmmac_counters *mmc) mmc->mmc_rx_fifo_overflow += readl(mmcaddr + MMC_RX_FIFO_OVERFLOW); mmc->mmc_rx_vlan_frames_gb += readl(mmcaddr + MMC_RX_VLAN_FRAMES_GB); mmc->mmc_rx_watchdog_error += readl(mmcaddr + MMC_RX_WATCHDOG_ERROR); + mmc->mmc_rx_lpi_usec += readl(mmcaddr + MMC_RX_LPI_USEC); + mmc->mmc_rx_lpi_tran += readl(mmcaddr + MMC_RX_LPI_TRAN); + /* IPv4 */ mmc->mmc_rx_ipv4_gd += readl(mmcaddr + MMC_RX_IPV4_GD); mmc->mmc_rx_ipv4_hderr += readl(mmcaddr + MMC_RX_IPV4_HDERR); -- cgit v1.3.1 From ff20393bdc4537c5e044e3002d7f25a45f0d0f98 Mon Sep 17 00:00:00 2001 From: Minda Chen Date: Mon, 8 Apr 2024 09:29:43 +0800 Subject: net: stmmac: mmc_core: Add GMAC mmc tx/rx missing statistics The missing statistics including Rx_Receive_Error_Packets and Tx_OSize_Packets_Good. Signed-off-by: Minda Chen Reviewed-by: Simon Horman Signed-off-by: David S. Miller --- drivers/net/ethernet/stmicro/stmmac/mmc.h | 2 ++ drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++++ drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 2 ++ 3 files changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc.h b/drivers/net/ethernet/stmicro/stmmac/mmc.h index dff02d75d519..5d1ea3e07459 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc.h +++ b/drivers/net/ethernet/stmicro/stmmac/mmc.h @@ -52,6 +52,7 @@ struct stmmac_counters { unsigned int mmc_tx_excessdef; unsigned int mmc_tx_pause_frame; unsigned int mmc_tx_vlan_frame_g; + unsigned int mmc_tx_oversize_g; unsigned int mmc_tx_lpi_usec; unsigned int mmc_tx_lpi_tran; @@ -80,6 +81,7 @@ struct stmmac_counters { unsigned int mmc_rx_fifo_overflow; unsigned int mmc_rx_vlan_frames_gb; unsigned int mmc_rx_watchdog_error; + unsigned int mmc_rx_error; unsigned int mmc_rx_lpi_usec; unsigned int mmc_rx_lpi_tran; unsigned int mmc_rx_discard_frames_gb; diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index b0db5f4e8fe8..0fab842902a8 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -53,6 +53,7 @@ #define MMC_TX_EXCESSDEF 0x6c #define MMC_TX_PAUSE_FRAME 0x70 #define MMC_TX_VLAN_FRAME_G 0x74 +#define MMC_TX_OVERSIZE_G 0x78 /* MMC RX counter registers */ #define MMC_RX_FRAMECOUNT_GB 0x80 @@ -79,6 +80,7 @@ #define MMC_RX_FIFO_OVERFLOW 0xd4 #define MMC_RX_VLAN_FRAMES_GB 0xd8 #define MMC_RX_WATCHDOG_ERROR 0xdc +#define MMC_RX_ERROR 0xe0 #define MMC_TX_LPI_USEC 0xec #define MMC_TX_LPI_TRAN 0xf0 @@ -289,6 +291,7 @@ static void dwmac_mmc_read(void __iomem *mmcaddr, struct stmmac_counters *mmc) mmc->mmc_tx_excessdef += readl(mmcaddr + MMC_TX_EXCESSDEF); mmc->mmc_tx_pause_frame += readl(mmcaddr + MMC_TX_PAUSE_FRAME); mmc->mmc_tx_vlan_frame_g += readl(mmcaddr + MMC_TX_VLAN_FRAME_G); + mmc->mmc_tx_oversize_g += readl(mmcaddr + MMC_TX_OVERSIZE_G); mmc->mmc_tx_lpi_usec += readl(mmcaddr + MMC_TX_LPI_USEC); mmc->mmc_tx_lpi_tran += readl(mmcaddr + MMC_TX_LPI_TRAN); @@ -324,6 +327,7 @@ static void dwmac_mmc_read(void __iomem *mmcaddr, struct stmmac_counters *mmc) mmc->mmc_rx_fifo_overflow += readl(mmcaddr + MMC_RX_FIFO_OVERFLOW); mmc->mmc_rx_vlan_frames_gb += readl(mmcaddr + MMC_RX_VLAN_FRAMES_GB); mmc->mmc_rx_watchdog_error += readl(mmcaddr + MMC_RX_WATCHDOG_ERROR); + mmc->mmc_rx_error += readl(mmcaddr + MMC_RX_ERROR); mmc->mmc_rx_lpi_usec += readl(mmcaddr + MMC_RX_LPI_USEC); mmc->mmc_rx_lpi_tran += readl(mmcaddr + MMC_RX_LPI_TRAN); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index e1537a57815f..542e2633a6f5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -212,6 +212,7 @@ static const struct stmmac_stats stmmac_mmc[] = { STMMAC_MMC_STAT(mmc_tx_excessdef), STMMAC_MMC_STAT(mmc_tx_pause_frame), STMMAC_MMC_STAT(mmc_tx_vlan_frame_g), + STMMAC_MMC_STAT(mmc_tx_oversize_g), STMMAC_MMC_STAT(mmc_tx_lpi_usec), STMMAC_MMC_STAT(mmc_tx_lpi_tran), STMMAC_MMC_STAT(mmc_rx_framecount_gb), @@ -238,6 +239,7 @@ static const struct stmmac_stats stmmac_mmc[] = { STMMAC_MMC_STAT(mmc_rx_fifo_overflow), STMMAC_MMC_STAT(mmc_rx_vlan_frames_gb), STMMAC_MMC_STAT(mmc_rx_watchdog_error), + STMMAC_MMC_STAT(mmc_rx_error), STMMAC_MMC_STAT(mmc_rx_lpi_usec), STMMAC_MMC_STAT(mmc_rx_lpi_tran), STMMAC_MMC_STAT(mmc_rx_discard_frames_gb), -- cgit v1.3.1 From d730192ff0246356a2d7e63ff5bd501060670eec Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 6 Apr 2024 13:40:52 +0200 Subject: ACPI: scan: Do not increase dep_unmet for already met dependencies On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends on 3 other devices: Name (_DEP, Package (0x03) // _DEP: Dependencies { I2C1, GPO2, GPO0 }) acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then before an acpi_device is created for the BATC handle (and thus before acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both GPIO depenencies, with free_when_met not set for the dependencies. Since there is no adev for BATC yet, there also is no dep_unmet to decrement. The only result of acpi_scan_clear_dep() in this case is dep->met getting set. Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies the acpi_device gets created for the BATC handle and acpi_scan_dep_init() runs, this sees 3 dependencies on the acpi_dep_list and initializes unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep becomes 2, but since the 2 GPIO deps where already met it never becomes 0 causing battery monitoring to not work. Fix this by modifying acpi_scan_dep_init() to not increase dep_met for dependencies which have already been marked as being met. Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies") Signed-off-by: Hans de Goede Cc: 6.5+ # 6.5+ Signed-off-by: Rafael J. Wysocki --- drivers/acpi/scan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 7c157bf92695..d1464324de95 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -1843,7 +1843,8 @@ static void acpi_scan_dep_init(struct acpi_device *adev) if (dep->honor_dep) adev->flags.honor_deps = 1; - adev->dep_unmet++; + if (!dep->met) + adev->dep_unmet++; } } } -- cgit v1.3.1 From 8ab58f6841b19423231c5db3378691ec80c778f8 Mon Sep 17 00:00:00 2001 From: Thierry Reding Date: Thu, 14 Mar 2024 16:49:43 +0100 Subject: gpu: host1x: Do not setup DMA for virtual devices The host1x devices are virtual compound devices and do not perform DMA accesses themselves, so they do not need to be set up for DMA. Ideally we would also not need to set up DMA masks for the virtual devices, but we currently still need those for legacy support on old hardware. Tested-by: Jon Hunter Acked-by: Jon Hunter Signed-off-by: Thierry Reding Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com --- drivers/gpu/host1x/bus.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/host1x/bus.c b/drivers/gpu/host1x/bus.c index 783975d1384f..7c52757a89db 100644 --- a/drivers/gpu/host1x/bus.c +++ b/drivers/gpu/host1x/bus.c @@ -351,11 +351,6 @@ static int host1x_device_uevent(const struct device *dev, return 0; } -static int host1x_dma_configure(struct device *dev) -{ - return of_dma_configure(dev, dev->of_node, true); -} - static const struct dev_pm_ops host1x_device_pm_ops = { .suspend = pm_generic_suspend, .resume = pm_generic_resume, @@ -369,7 +364,6 @@ const struct bus_type host1x_bus_type = { .name = "host1x", .match = host1x_device_match, .uevent = host1x_device_uevent, - .dma_configure = host1x_dma_configure, .pm = &host1x_device_pm_ops, }; @@ -458,8 +452,6 @@ static int host1x_device_add(struct host1x *host1x, device->dev.bus = &host1x_bus_type; device->dev.parent = host1x->dev; - of_dma_configure(&device->dev, host1x->dev->of_node, true); - device->dev.dma_parms = &device->dma_parms; dma_set_max_seg_size(&device->dev, UINT_MAX); -- cgit v1.3.1 From 3eadd887dbac1df8f25f701e5d404d1b90fd0fea Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Thu, 4 Apr 2024 23:33:25 +0300 Subject: drm/client: Fully protect modes[] with dev->mode_config.mutex MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The modes[] array contains pointers to modes on the connectors' mode lists, which are protected by dev->mode_config.mutex. Thus we need to extend modes[] the same protection or by the time we use it the elements may already be pointing to freed/reused memory. Cc: stable@vger.kernel.org Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583 Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com Reviewed-by: Dmitry Baryshkov Reviewed-by: Jani Nikula Reviewed-by: Thomas Zimmermann --- drivers/gpu/drm/drm_client_modeset.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c index 871e4e2129d6..0683a129b362 100644 --- a/drivers/gpu/drm/drm_client_modeset.c +++ b/drivers/gpu/drm/drm_client_modeset.c @@ -777,6 +777,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, unsigned int total_modes_count = 0; struct drm_client_offset *offsets; unsigned int connector_count = 0; + /* points to modes protected by mode_config.mutex */ struct drm_display_mode **modes; struct drm_crtc **crtcs; int i, ret = 0; @@ -845,7 +846,6 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, drm_client_pick_crtcs(client, connectors, connector_count, crtcs, modes, 0, width, height); } - mutex_unlock(&dev->mode_config.mutex); drm_client_modeset_release(client); @@ -875,6 +875,7 @@ int drm_client_modeset_probe(struct drm_client_dev *client, unsigned int width, modeset->y = offset->y; } } + mutex_unlock(&dev->mode_config.mutex); mutex_unlock(&client->modeset_mutex); out: -- cgit v1.3.1 From 5864e479ca4344f3a5df8074524da24c960f440b Mon Sep 17 00:00:00 2001 From: David McFarland Date: Thu, 4 Apr 2024 08:41:45 -0300 Subject: platform/x86/intel/hid: Don't wake on 5-button releases MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If, for example, the power button is configured to suspend, holding it and releasing it after the machine has suspended, will wake the machine. Also on some machines, power button release events are sent during hibernation, even if the button wasn't used to hibernate the machine. This causes hibernation to be aborted. Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation") Signed-off-by: David McFarland Tested-by: Enrik Berkhan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/hid.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index 7457ca2b27a6..9ffbdc988fe5 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -504,6 +504,7 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) struct platform_device *device = context; struct intel_hid_priv *priv = dev_get_drvdata(&device->dev); unsigned long long ev_index; + struct key_entry *ke; int err; /* @@ -545,11 +546,15 @@ static void notify_handler(acpi_handle handle, u32 event, void *context) if (event == 0xc0 || !priv->array) return; - if (!sparse_keymap_entry_from_scancode(priv->array, event)) { + ke = sparse_keymap_entry_from_scancode(priv->array, event); + if (!ke) { dev_info(&device->dev, "unknown event 0x%x\n", event); return; } + if (ke->type == KE_IGNORE) + return; + wakeup: pm_wakeup_hard_event(&device->dev); -- cgit v1.3.1 From 79ce88064bb04ec62c4e9e4da4614d36906f8a04 Mon Sep 17 00:00:00 2001 From: Sumeet Pawnikar Date: Fri, 5 Apr 2024 17:56:30 +0530 Subject: platform/x86/intel/hid: Add Lunar Lake and Arrow Lake support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs. Signed-off-by: Sumeet Pawnikar Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/hid.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/hid.c b/drivers/platform/x86/intel/hid.c index 9ffbdc988fe5..c7a827645864 100644 --- a/drivers/platform/x86/intel/hid.c +++ b/drivers/platform/x86/intel/hid.c @@ -49,6 +49,8 @@ static const struct acpi_device_id intel_hid_ids[] = { {"INTC1076", 0}, {"INTC1077", 0}, {"INTC1078", 0}, + {"INTC107B", 0}, + {"INTC10CB", 0}, {"", 0}, }; MODULE_DEVICE_TABLE(acpi, intel_hid_ids); -- cgit v1.3.1 From 592780b8391fe31f129ef4823c1513528f4dcb76 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Apr 2024 08:47:13 -0700 Subject: cxl: Fix retrieving of access_coordinates in PCIe path Current loop in cxl_endpoint_get_perf_coordinates() incorrectly assumes the Root Port (RP) dport is the one with generic port access_coordinate. However those coordinates are one level up in the Host Bridge (HB). Current code causes the computation code to pick up 0s as the coordinates and cause minimal bandwidth to result in 0. Add check to skip RP when combining coordinates. Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports") Reported-by: Jonathan Cameron Reviewed-by: Jonathan Cameron Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240403154844.3403859-3-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/core/port.c | 35 ++++++++++++++++++++++------------- 1 file changed, 22 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 6cbde50a742b..7aadcec4fc64 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2165,6 +2165,11 @@ int cxl_hb_get_perf_coordinates(struct cxl_port *port, return 0; } +static bool parent_port_is_cxl_root(struct cxl_port *port) +{ + return is_cxl_root(to_cxl_port(port->dev.parent)); +} + /** * cxl_endpoint_get_perf_coordinates - Retrieve performance numbers stored in dports * of CXL path @@ -2184,27 +2189,31 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, struct cxl_dport *dport; struct pci_dev *pdev; unsigned int bw; + bool is_cxl_root; if (!is_cxl_endpoint(port)) return -EINVAL; - dport = iter->parent_dport; - /* - * Exit the loop when the parent port of the current port is cxl root. - * The iterative loop starts at the endpoint and gathers the - * latency of the CXL link from the current iter to the next downstream - * port each iteration. If the parent is cxl root then there is - * nothing to gather. + * Exit the loop when the parent port of the current iter port is cxl + * root. The iterative loop starts at the endpoint and gathers the + * latency of the CXL link from the current device/port to the connected + * downstream port each iteration. */ - while (!is_cxl_root(to_cxl_port(iter->dev.parent))) { - cxl_coordinates_combine(&c, &c, &dport->sw_coord); + do { + dport = iter->parent_dport; + iter = to_cxl_port(iter->dev.parent); + is_cxl_root = parent_port_is_cxl_root(iter); + + /* + * There's no valid access_coordinate for a root port since RPs do not + * have CDAT and therefore needs to be skipped. + */ + if (!is_cxl_root) + cxl_coordinates_combine(&c, &c, &dport->sw_coord); c.write_latency += dport->link_latency; c.read_latency += dport->link_latency; - - iter = to_cxl_port(iter->dev.parent); - dport = iter->parent_dport; - } + } while (!is_cxl_root); /* Get the calculated PCI paths bandwidth */ pdev = to_pci_dev(port->uport_dev->parent); -- cgit v1.3.1 From 51293c565cf4b8d57c154efadb57b17866c74bcb Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Apr 2024 08:47:14 -0700 Subject: cxl: Fix incorrect region perf data calculation Current math in cxl_region_perf_data_calculate divides the latency by 1000 every time the function gets called. This causes the region latency to be divided by 1000 per memory device and the math is incorrect. This is user visible as the latency access_coordinate exposed via sysfs will show incorrect latency data. Normalize values from CDAT to nanoseconds. Adjust sub-nanoseconds latency to at least 1. Remove adjustment of perf numbers from the generic target since hmat handling code has already normalized those numbers. Now all computation and stored numbers should be in nanoseconds. cxl_hb_get_perf_coordinates() is removed and HB coords are calculated in the port access_coordinate calculation path since it no longer need to be treated special. Fixes: 3d9f4a197230 ("cxl/region: Calculate performance data for a region") Reviewed-by: Jonathan Cameron Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240403154844.3403859-4-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/acpi.c | 13 +------ drivers/cxl/core/cdat.c | 94 +++++++++++++++++++++---------------------------- drivers/cxl/core/port.c | 36 +++---------------- drivers/cxl/cxl.h | 2 -- 4 files changed, 45 insertions(+), 100 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c index af5cb818f84d..566c387d4385 100644 --- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -525,22 +525,11 @@ static int get_genport_coordinates(struct device *dev, struct cxl_dport *dport) { struct acpi_device *hb = to_cxl_host_bridge(NULL, dev); u32 uid; - int rc; if (kstrtou32(acpi_device_uid(hb), 0, &uid)) return -EINVAL; - rc = acpi_get_genport_coordinates(uid, dport->hb_coord); - if (rc < 0) - return rc; - - /* Adjust back to picoseconds from nanoseconds */ - for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { - dport->hb_coord[i].read_latency *= 1000; - dport->hb_coord[i].write_latency *= 1000; - } - - return 0; + return acpi_get_genport_coordinates(uid, dport->hb_coord); } static int add_host_bridge_dport(struct device *match, void *arg) diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c index eddbbe21450c..f66b493b5d3c 100644 --- a/drivers/cxl/core/cdat.c +++ b/drivers/cxl/core/cdat.c @@ -20,6 +20,36 @@ struct dsmas_entry { int qos_class; }; +static u32 cdat_normalize(u16 entry, u64 base, u8 type) +{ + u32 value; + + /* + * Check for invalid and overflow values + */ + if (entry == 0xffff || !entry) + return 0; + else if (base > (UINT_MAX / (entry))) + return 0; + + /* + * CDAT fields follow the format of HMAT fields. See table 5 Device + * Scoped Latency and Bandwidth Information Structure in Coherent Device + * Attribute Table (CDAT) Specification v1.01. + */ + value = entry * base; + switch (type) { + case ACPI_HMAT_ACCESS_LATENCY: + case ACPI_HMAT_READ_LATENCY: + case ACPI_HMAT_WRITE_LATENCY: + value = DIV_ROUND_UP(value, 1000); + break; + default: + break; + } + return value; +} + static int cdat_dsmas_handler(union acpi_subtable_headers *header, void *arg, const unsigned long end) { @@ -97,7 +127,6 @@ static int cdat_dslbis_handler(union acpi_subtable_headers *header, void *arg, __le16 le_val; u64 val; u16 len; - int rc; len = le16_to_cpu((__force __le16)hdr->length); if (len != size || (unsigned long)hdr + len > end) { @@ -124,10 +153,8 @@ static int cdat_dslbis_handler(union acpi_subtable_headers *header, void *arg, le_base = (__force __le64)dslbis->entry_base_unit; le_val = (__force __le16)dslbis->entry[0]; - rc = check_mul_overflow(le64_to_cpu(le_base), - le16_to_cpu(le_val), &val); - if (rc) - pr_warn("DSLBIS value overflowed.\n"); + val = cdat_normalize(le16_to_cpu(le_val), le64_to_cpu(le_base), + dslbis->data_type); cxl_access_coordinate_set(&dent->coord, dslbis->data_type, val); @@ -164,7 +191,6 @@ static int cxl_port_perf_data_calculate(struct cxl_port *port, struct xarray *dsmas_xa) { struct access_coordinate ep_c; - struct access_coordinate coord[ACCESS_COORDINATE_MAX]; struct dsmas_entry *dent; int valid_entries = 0; unsigned long index; @@ -176,12 +202,6 @@ static int cxl_port_perf_data_calculate(struct cxl_port *port, return rc; } - rc = cxl_hb_get_perf_coordinates(port, coord); - if (rc) { - dev_dbg(&port->dev, "Failed to retrieve hb perf coordinates.\n"); - return rc; - } - struct cxl_root *cxl_root __free(put_cxl_root) = find_cxl_root(port); if (!cxl_root) @@ -194,18 +214,9 @@ static int cxl_port_perf_data_calculate(struct cxl_port *port, int qos_class; cxl_coordinates_combine(&dent->coord, &dent->coord, &ep_c); - /* - * Keeping the host bridge coordinates separate from the dsmas - * coordinates in order to allow calculation of access class - * 0 and 1 for region later. - */ - cxl_coordinates_combine(&coord[ACCESS_COORDINATE_CPU], - &coord[ACCESS_COORDINATE_CPU], - &dent->coord); dent->entries = 1; - rc = cxl_root->ops->qos_class(cxl_root, - &coord[ACCESS_COORDINATE_CPU], - 1, &qos_class); + rc = cxl_root->ops->qos_class(cxl_root, &dent->coord, 1, + &qos_class); if (rc != 1) continue; @@ -461,10 +472,8 @@ static int cdat_sslbis_handler(union acpi_subtable_headers *header, void *arg, le_base = (__force __le64)tbl->sslbis_header.entry_base_unit; le_val = (__force __le16)tbl->entries[i].latency_or_bandwidth; - - if (check_mul_overflow(le64_to_cpu(le_base), - le16_to_cpu(le_val), &val)) - dev_warn(dev, "SSLBIS value overflowed!\n"); + val = cdat_normalize(le16_to_cpu(le_val), le64_to_cpu(le_base), + sslbis->data_type); xa_for_each(&port->dports, index, dport) { if (dsp_id == ACPI_CDAT_SSLBIS_ANY_PORT || @@ -521,17 +530,13 @@ void cxl_region_perf_data_calculate(struct cxl_region *cxlr, struct cxl_endpoint_decoder *cxled) { struct cxl_memdev *cxlmd = cxled_to_memdev(cxled); - struct cxl_port *port = cxlmd->endpoint; struct cxl_dev_state *cxlds = cxlmd->cxlds; struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds); - struct access_coordinate hb_coord[ACCESS_COORDINATE_MAX]; - struct access_coordinate coord; struct range dpa = { .start = cxled->dpa_res->start, .end = cxled->dpa_res->end, }; struct cxl_dpa_perf *perf; - int rc; switch (cxlr->mode) { case CXL_DECODER_RAM: @@ -549,35 +554,16 @@ void cxl_region_perf_data_calculate(struct cxl_region *cxlr, if (!range_contains(&perf->dpa_range, &dpa)) return; - rc = cxl_hb_get_perf_coordinates(port, hb_coord); - if (rc) { - dev_dbg(&port->dev, "Failed to retrieve hb perf coordinates.\n"); - return; - } - for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { - /* Pickup the host bridge coords */ - cxl_coordinates_combine(&coord, &hb_coord[i], &perf->coord); - /* Get total bandwidth and the worst latency for the cxl region */ cxlr->coord[i].read_latency = max_t(unsigned int, cxlr->coord[i].read_latency, - coord.read_latency); + perf->coord.read_latency); cxlr->coord[i].write_latency = max_t(unsigned int, cxlr->coord[i].write_latency, - coord.write_latency); - cxlr->coord[i].read_bandwidth += coord.read_bandwidth; - cxlr->coord[i].write_bandwidth += coord.write_bandwidth; - - /* - * Convert latency to nanosec from picosec to be consistent - * with the resulting latency coordinates computed by the - * HMAT_REPORTING code. - */ - cxlr->coord[i].read_latency = - DIV_ROUND_UP(cxlr->coord[i].read_latency, 1000); - cxlr->coord[i].write_latency = - DIV_ROUND_UP(cxlr->coord[i].write_latency, 1000); + perf->coord.write_latency); + cxlr->coord[i].read_bandwidth += perf->coord.read_bandwidth; + cxlr->coord[i].write_bandwidth += perf->coord.write_bandwidth; } } diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 7aadcec4fc64..c7c00eb373af 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2133,38 +2133,6 @@ bool schedule_cxl_memdev_detach(struct cxl_memdev *cxlmd) } EXPORT_SYMBOL_NS_GPL(schedule_cxl_memdev_detach, CXL); -/** - * cxl_hb_get_perf_coordinates - Retrieve performance numbers between initiator - * and host bridge - * - * @port: endpoint cxl_port - * @coord: output access coordinates - * - * Return: errno on failure, 0 on success. - */ -int cxl_hb_get_perf_coordinates(struct cxl_port *port, - struct access_coordinate *coord) -{ - struct cxl_port *iter = port; - struct cxl_dport *dport; - - if (!is_cxl_endpoint(port)) - return -EINVAL; - - dport = iter->parent_dport; - while (iter && !is_cxl_root(to_cxl_port(iter->dev.parent))) { - iter = to_cxl_port(iter->dev.parent); - dport = iter->parent_dport; - } - - coord[ACCESS_COORDINATE_LOCAL] = - dport->hb_coord[ACCESS_COORDINATE_LOCAL]; - coord[ACCESS_COORDINATE_CPU] = - dport->hb_coord[ACCESS_COORDINATE_CPU]; - - return 0; -} - static bool parent_port_is_cxl_root(struct cxl_port *port) { return is_cxl_root(to_cxl_port(port->dev.parent)); @@ -2215,6 +2183,10 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, c.read_latency += dport->link_latency; } while (!is_cxl_root); + dport = iter->parent_dport; + /* Retrieve HB coords */ + cxl_coordinates_combine(&c, &c, dport->hb_coord); + /* Get the calculated PCI paths bandwidth */ pdev = to_pci_dev(port->uport_dev->parent); bw = pcie_bandwidth_available(pdev, NULL, NULL, NULL); diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index 534e25e2f0a4..ed02373ce3d9 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -884,8 +884,6 @@ void cxl_switch_parse_cdat(struct cxl_port *port); int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, struct access_coordinate *coord); -int cxl_hb_get_perf_coordinates(struct cxl_port *port, - struct access_coordinate *coord); void cxl_region_perf_data_calculate(struct cxl_region *cxlr, struct cxl_endpoint_decoder *cxled); -- cgit v1.3.1 From 001c5d19341a39cb683ab0a18ce4b662a09d96a0 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Apr 2024 08:47:15 -0700 Subject: cxl: Consolidate dport access_coordinate ->hb_coord and ->sw_coord into ->coord The driver stores access_coordinate for host bridge in ->hb_coord and switch CDAT access_coordinate in ->sw_coord. Since neither of these access_coordinate clobber each other, the variable name can be consolidated into ->coord to simplify the code. Reviewed-by: Jonathan Cameron Reviewed-by: Davidlohr Bueso Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240403154844.3403859-5-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/acpi.c | 2 +- drivers/cxl/core/cdat.c | 74 ++++++++++++++++++++++++++++---------------- drivers/cxl/core/port.c | 48 +++++++++++++++++++++------- drivers/cxl/cxl.h | 6 ++-- drivers/cxl/cxlmem.h | 2 +- tools/testing/cxl/test/cxl.c | 10 +++--- 6 files changed, 94 insertions(+), 48 deletions(-) (limited to 'drivers') diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c index 566c387d4385..cb8c155a2c9b 100644 --- a/drivers/cxl/acpi.c +++ b/drivers/cxl/acpi.c @@ -529,7 +529,7 @@ static int get_genport_coordinates(struct device *dev, struct cxl_dport *dport) if (kstrtou32(acpi_device_uid(hb), 0, &uid)) return -EINVAL; - return acpi_get_genport_coordinates(uid, dport->hb_coord); + return acpi_get_genport_coordinates(uid, dport->coord); } static int add_host_bridge_dport(struct device *match, void *arg) diff --git a/drivers/cxl/core/cdat.c b/drivers/cxl/core/cdat.c index f66b493b5d3c..bb83867d9fec 100644 --- a/drivers/cxl/core/cdat.c +++ b/drivers/cxl/core/cdat.c @@ -14,7 +14,7 @@ struct dsmas_entry { struct range dpa_range; u8 handle; - struct access_coordinate coord; + struct access_coordinate coord[ACCESS_COORDINATE_MAX]; int entries; int qos_class; @@ -88,8 +88,8 @@ static int cdat_dsmas_handler(union acpi_subtable_headers *header, void *arg, return 0; } -static void cxl_access_coordinate_set(struct access_coordinate *coord, - int access, unsigned int val) +static void __cxl_access_coordinate_set(struct access_coordinate *coord, + int access, unsigned int val) { switch (access) { case ACPI_HMAT_ACCESS_LATENCY: @@ -115,6 +115,13 @@ static void cxl_access_coordinate_set(struct access_coordinate *coord, } } +static void cxl_access_coordinate_set(struct access_coordinate *coord, + int access, unsigned int val) +{ + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) + __cxl_access_coordinate_set(&coord[i], access, val); +} + static int cdat_dslbis_handler(union acpi_subtable_headers *header, void *arg, const unsigned long end) { @@ -156,7 +163,7 @@ static int cdat_dslbis_handler(union acpi_subtable_headers *header, void *arg, val = cdat_normalize(le16_to_cpu(le_val), le64_to_cpu(le_base), dslbis->data_type); - cxl_access_coordinate_set(&dent->coord, dslbis->data_type, val); + cxl_access_coordinate_set(dent->coord, dslbis->data_type, val); return 0; } @@ -190,13 +197,13 @@ static int cxl_cdat_endpoint_process(struct cxl_port *port, static int cxl_port_perf_data_calculate(struct cxl_port *port, struct xarray *dsmas_xa) { - struct access_coordinate ep_c; + struct access_coordinate ep_c[ACCESS_COORDINATE_MAX]; struct dsmas_entry *dent; int valid_entries = 0; unsigned long index; int rc; - rc = cxl_endpoint_get_perf_coordinates(port, &ep_c); + rc = cxl_endpoint_get_perf_coordinates(port, ep_c); if (rc) { dev_dbg(&port->dev, "Failed to retrieve ep perf coordinates.\n"); return rc; @@ -213,10 +220,11 @@ static int cxl_port_perf_data_calculate(struct cxl_port *port, xa_for_each(dsmas_xa, index, dent) { int qos_class; - cxl_coordinates_combine(&dent->coord, &dent->coord, &ep_c); + cxl_coordinates_combine(dent->coord, dent->coord, ep_c); dent->entries = 1; - rc = cxl_root->ops->qos_class(cxl_root, &dent->coord, 1, - &qos_class); + rc = cxl_root->ops->qos_class(cxl_root, + &dent->coord[ACCESS_COORDINATE_CPU], + 1, &qos_class); if (rc != 1) continue; @@ -233,14 +241,17 @@ static int cxl_port_perf_data_calculate(struct cxl_port *port, static void update_perf_entry(struct device *dev, struct dsmas_entry *dent, struct cxl_dpa_perf *dpa_perf) { + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) + dpa_perf->coord[i] = dent->coord[i]; dpa_perf->dpa_range = dent->dpa_range; - dpa_perf->coord = dent->coord; dpa_perf->qos_class = dent->qos_class; dev_dbg(dev, "DSMAS: dpa: %#llx qos: %d read_bw: %d write_bw %d read_lat: %d write_lat: %d\n", dent->dpa_range.start, dpa_perf->qos_class, - dent->coord.read_bandwidth, dent->coord.write_bandwidth, - dent->coord.read_latency, dent->coord.write_latency); + dent->coord[ACCESS_COORDINATE_CPU].read_bandwidth, + dent->coord[ACCESS_COORDINATE_CPU].write_bandwidth, + dent->coord[ACCESS_COORDINATE_CPU].read_latency, + dent->coord[ACCESS_COORDINATE_CPU].write_latency); } static void cxl_memdev_set_qos_class(struct cxl_dev_state *cxlds, @@ -477,10 +488,11 @@ static int cdat_sslbis_handler(union acpi_subtable_headers *header, void *arg, xa_for_each(&port->dports, index, dport) { if (dsp_id == ACPI_CDAT_SSLBIS_ANY_PORT || - dsp_id == dport->port_id) - cxl_access_coordinate_set(&dport->sw_coord, + dsp_id == dport->port_id) { + cxl_access_coordinate_set(dport->coord, sslbis->data_type, val); + } } } @@ -502,6 +514,21 @@ void cxl_switch_parse_cdat(struct cxl_port *port) } EXPORT_SYMBOL_NS_GPL(cxl_switch_parse_cdat, CXL); +static void __cxl_coordinates_combine(struct access_coordinate *out, + struct access_coordinate *c1, + struct access_coordinate *c2) +{ + if (c1->write_bandwidth && c2->write_bandwidth) + out->write_bandwidth = min(c1->write_bandwidth, + c2->write_bandwidth); + out->write_latency = c1->write_latency + c2->write_latency; + + if (c1->read_bandwidth && c2->read_bandwidth) + out->read_bandwidth = min(c1->read_bandwidth, + c2->read_bandwidth); + out->read_latency = c1->read_latency + c2->read_latency; +} + /** * cxl_coordinates_combine - Combine the two input coordinates * @@ -513,15 +540,8 @@ void cxl_coordinates_combine(struct access_coordinate *out, struct access_coordinate *c1, struct access_coordinate *c2) { - if (c1->write_bandwidth && c2->write_bandwidth) - out->write_bandwidth = min(c1->write_bandwidth, - c2->write_bandwidth); - out->write_latency = c1->write_latency + c2->write_latency; - - if (c1->read_bandwidth && c2->read_bandwidth) - out->read_bandwidth = min(c1->read_bandwidth, - c2->read_bandwidth); - out->read_latency = c1->read_latency + c2->read_latency; + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) + __cxl_coordinates_combine(&out[i], &c1[i], &c2[i]); } MODULE_IMPORT_NS(CXL); @@ -558,12 +578,12 @@ void cxl_region_perf_data_calculate(struct cxl_region *cxlr, /* Get total bandwidth and the worst latency for the cxl region */ cxlr->coord[i].read_latency = max_t(unsigned int, cxlr->coord[i].read_latency, - perf->coord.read_latency); + perf->coord[i].read_latency); cxlr->coord[i].write_latency = max_t(unsigned int, cxlr->coord[i].write_latency, - perf->coord.write_latency); - cxlr->coord[i].read_bandwidth += perf->coord.read_bandwidth; - cxlr->coord[i].write_bandwidth += perf->coord.write_bandwidth; + perf->coord[i].write_latency); + cxlr->coord[i].read_bandwidth += perf->coord[i].read_bandwidth; + cxlr->coord[i].write_bandwidth += perf->coord[i].write_bandwidth; } } diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index c7c00eb373af..801c4018a1dd 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2133,6 +2133,29 @@ bool schedule_cxl_memdev_detach(struct cxl_memdev *cxlmd) } EXPORT_SYMBOL_NS_GPL(schedule_cxl_memdev_detach, CXL); +static void add_latency(struct access_coordinate *c, long latency) +{ + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { + c[i].write_latency += latency; + c[i].read_latency += latency; + } +} + +static void set_min_bandwidth(struct access_coordinate *c, unsigned int bw) +{ + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { + c[i].write_bandwidth = min(c[i].write_bandwidth, bw); + c[i].read_bandwidth = min(c[i].read_bandwidth, bw); + } +} + +static void set_access_coordinates(struct access_coordinate *out, + struct access_coordinate *in) +{ + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) + out[i] = in[i]; +} + static bool parent_port_is_cxl_root(struct cxl_port *port) { return is_cxl_root(to_cxl_port(port->dev.parent)); @@ -2149,9 +2172,15 @@ static bool parent_port_is_cxl_root(struct cxl_port *port) int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, struct access_coordinate *coord) { - struct access_coordinate c = { - .read_bandwidth = UINT_MAX, - .write_bandwidth = UINT_MAX, + struct access_coordinate c[] = { + { + .read_bandwidth = UINT_MAX, + .write_bandwidth = UINT_MAX, + }, + { + .read_bandwidth = UINT_MAX, + .write_bandwidth = UINT_MAX, + }, }; struct cxl_port *iter = port; struct cxl_dport *dport; @@ -2178,14 +2207,13 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, * have CDAT and therefore needs to be skipped. */ if (!is_cxl_root) - cxl_coordinates_combine(&c, &c, &dport->sw_coord); - c.write_latency += dport->link_latency; - c.read_latency += dport->link_latency; + cxl_coordinates_combine(c, c, dport->coord); + add_latency(c, dport->link_latency); } while (!is_cxl_root); dport = iter->parent_dport; /* Retrieve HB coords */ - cxl_coordinates_combine(&c, &c, dport->hb_coord); + cxl_coordinates_combine(c, c, dport->coord); /* Get the calculated PCI paths bandwidth */ pdev = to_pci_dev(port->uport_dev->parent); @@ -2194,10 +2222,8 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, return -ENXIO; bw /= BITS_PER_BYTE; - c.write_bandwidth = min(c.write_bandwidth, bw); - c.read_bandwidth = min(c.read_bandwidth, bw); - - *coord = c; + set_min_bandwidth(c, bw); + set_access_coordinates(coord, c); return 0; } diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h index ed02373ce3d9..036d17db68e0 100644 --- a/drivers/cxl/cxl.h +++ b/drivers/cxl/cxl.h @@ -663,8 +663,7 @@ struct cxl_rcrb_info { * @rch: Indicate whether this dport was enumerated in RCH or VH mode * @port: reference to cxl_port that contains this downstream port * @regs: Dport parsed register blocks - * @sw_coord: access coordinates (performance) for switch from CDAT - * @hb_coord: access coordinates (performance) from ACPI generic port (host bridge) + * @coord: access coordinates (bandwidth and latency performance attributes) * @link_latency: calculated PCIe downstream latency */ struct cxl_dport { @@ -675,8 +674,7 @@ struct cxl_dport { bool rch; struct cxl_port *port; struct cxl_regs regs; - struct access_coordinate sw_coord; - struct access_coordinate hb_coord[ACCESS_COORDINATE_MAX]; + struct access_coordinate coord[ACCESS_COORDINATE_MAX]; long link_latency; }; diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h index 20fb3b35e89e..36cee9c30ceb 100644 --- a/drivers/cxl/cxlmem.h +++ b/drivers/cxl/cxlmem.h @@ -401,7 +401,7 @@ enum cxl_devtype { */ struct cxl_dpa_perf { struct range dpa_range; - struct access_coordinate coord; + struct access_coordinate coord[ACCESS_COORDINATE_MAX]; int qos_class; }; diff --git a/tools/testing/cxl/test/cxl.c b/tools/testing/cxl/test/cxl.c index 908e0d083936..61c69297e797 100644 --- a/tools/testing/cxl/test/cxl.c +++ b/tools/testing/cxl/test/cxl.c @@ -986,10 +986,12 @@ static void dpa_perf_setup(struct cxl_port *endpoint, struct range *range, { dpa_perf->qos_class = FAKE_QTG_ID; dpa_perf->dpa_range = *range; - dpa_perf->coord.read_latency = 500; - dpa_perf->coord.write_latency = 500; - dpa_perf->coord.read_bandwidth = 1000; - dpa_perf->coord.write_bandwidth = 1000; + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { + dpa_perf->coord[i].read_latency = 500; + dpa_perf->coord[i].write_latency = 500; + dpa_perf->coord[i].read_bandwidth = 1000; + dpa_perf->coord[i].write_bandwidth = 1000; + } } static void mock_cxl_endpoint_parse_cdat(struct cxl_port *port) -- cgit v1.3.1 From 7bcf809b1e7889ab7e75fe1fcf8f1a98332f36d2 Mon Sep 17 00:00:00 2001 From: Dave Jiang Date: Wed, 3 Apr 2024 08:47:16 -0700 Subject: cxl: Add checks to access_coordinate calculation to fail missing data Jonathan noted that when the coordinates for host bridge and switches can be 0s if no actual data are retrieved and the calculation continues. The resulting number would be inaccurate. Add checks to ensure that the calculation would complete only if the numbers are valid. While not seen in the wild, issue may show up with a BIOS that reported CXL root ports via Generic Ports (via a PCI handle in the SRAT entry). Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports") Reported-by: Jonathan Cameron Reviewed-by: Jonathan Cameron Reviewed-by: Davidlohr Bueso Reviewed-by: Dan Williams Link: https://lore.kernel.org/r/20240403154844.3403859-6-dave.jiang@intel.com Signed-off-by: Dave Jiang --- drivers/cxl/core/port.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/cxl/core/port.c b/drivers/cxl/core/port.c index 801c4018a1dd..762783bb091a 100644 --- a/drivers/cxl/core/port.c +++ b/drivers/cxl/core/port.c @@ -2141,6 +2141,18 @@ static void add_latency(struct access_coordinate *c, long latency) } } +static bool coordinates_valid(struct access_coordinate *c) +{ + for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { + if (c[i].read_bandwidth && c[i].write_bandwidth && + c[i].read_latency && c[i].write_latency) + continue; + return false; + } + + return true; +} + static void set_min_bandwidth(struct access_coordinate *c, unsigned int bw) { for (int i = 0; i < ACCESS_COORDINATE_MAX; i++) { @@ -2206,13 +2218,18 @@ int cxl_endpoint_get_perf_coordinates(struct cxl_port *port, * There's no valid access_coordinate for a root port since RPs do not * have CDAT and therefore needs to be skipped. */ - if (!is_cxl_root) + if (!is_cxl_root) { + if (!coordinates_valid(dport->coord)) + return -EINVAL; cxl_coordinates_combine(c, c, dport->coord); + } add_latency(c, dport->link_latency); } while (!is_cxl_root); dport = iter->parent_dport; /* Retrieve HB coords */ + if (!coordinates_valid(dport->coord)) + return -EINVAL; cxl_coordinates_combine(c, c, dport->coord); /* Get the calculated PCI paths bandwidth */ -- cgit v1.3.1 From 0dd50b3e2c3d651ea972c97cff1af67870f3deaf Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 2 Apr 2024 14:43:51 +0200 Subject: platform/x86: toshiba_acpi: Silence logging for some events MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Stop logging unknown event / unknown keycode messages on suspend / resume on a Toshiba Portege Z830: 1. The Toshiba Portege Z830 sends a 0x8e event when the power button is pressed, ignore this. 2. The Toshiba Portege Z830 sends a 0xe00 hotkey event on resume from suspend, ignore this. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240402124351.167152-1-hdegoede@redhat.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/toshiba_acpi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index 291f14ef6702..77244c9aa60d 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -264,6 +264,7 @@ static const struct key_entry toshiba_acpi_keymap[] = { { KE_KEY, 0xb32, { KEY_NEXTSONG } }, { KE_KEY, 0xb33, { KEY_PLAYPAUSE } }, { KE_KEY, 0xb5a, { KEY_MEDIA } }, + { KE_IGNORE, 0x0e00, { KEY_RESERVED } }, /* Wake from sleep */ { KE_IGNORE, 0x1430, { KEY_RESERVED } }, /* Wake from sleep */ { KE_IGNORE, 0x1501, { KEY_RESERVED } }, /* Output changed */ { KE_IGNORE, 0x1502, { KEY_RESERVED } }, /* HDMI plugged/unplugged */ @@ -3523,9 +3524,10 @@ static void toshiba_acpi_notify(struct acpi_device *acpi_dev, u32 event) (dev->kbd_mode == SCI_KBD_MODE_ON) ? LED_FULL : LED_OFF); break; + case 0x8e: /* Power button pressed */ + break; case 0x85: /* Unknown */ case 0x8d: /* Unknown */ - case 0x8e: /* Unknown */ case 0x94: /* Unknown */ case 0x95: /* Unknown */ default: -- cgit v1.3.1 From 868adf8a29179c00309ddd8ffe0afa2043f42cb5 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Fri, 29 Mar 2024 07:32:05 -0700 Subject: platform/x86: intel-vbtn: Use acpi_has_method to check for switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The check for a device having virtual buttons is done using acpi_has_method(..."VBDL"). Mimic that for checking virtual switch presence. Signed-off-by: Gwendal Grignou Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240329143206.2977734-2-gwendal@chromium.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vbtn.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index 084c355c86f5..48f0ac19d6dd 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -258,9 +258,6 @@ static const struct dmi_system_id dmi_switches_allow_list[] = { static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) { - unsigned long long vgbs; - acpi_status status; - /* See dual_accel_detect.h for more info */ if (dual_accel) return false; @@ -268,8 +265,7 @@ static bool intel_vbtn_has_switches(acpi_handle handle, bool dual_accel) if (!dmi_check_system(dmi_switches_allow_list)) return false; - status = acpi_evaluate_integer(handle, "VGBS", NULL, &vgbs); - return ACPI_SUCCESS(status); + return acpi_has_method(handle, "VGBS"); } static int intel_vbtn_probe(struct platform_device *device) -- cgit v1.3.1 From 434e5781d8cd2d0ed512d920c6cdeba4b33a2e81 Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Fri, 29 Mar 2024 07:32:06 -0700 Subject: platform/x86: intel-vbtn: Update tablet mode switch at end of probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ACER Vivobook Flip (TP401NAS) virtual intel switch is implemented as follow: Device (VGBI) { Name (_HID, EisaId ("INT33D6") ... Name (VBDS, Zero) Method (_STA, 0, Serialized) // _STA: Status ... Method (VBDL, 0, Serialized) { PB1E |= 0x20 VBDS |= 0x40 } Method (VGBS, 0, Serialized) { Return (VBDS) /* \_SB_.PCI0.SBRG.EC0_.VGBI.VBDS */ } ... } By default VBDS is set to 0. At boot it is set to clamshell (bit 6 set) only after method VBDL is executed. Since VBDL is now evaluated in the probe routine later, after the device is registered, the retrieved value of VBDS was still 0 ("tablet mode") when setting up the virtual switch. Make sure to evaluate VGBS after VBDL, to ensure the convertible boots in clamshell mode, the expected default. Fixes: 26173179fae1 ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier") Signed-off-by: Gwendal Grignou Reviewed-by: Kuppuswamy Sathyanarayanan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240329143206.2977734-3-gwendal@chromium.org Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/vbtn.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/vbtn.c b/drivers/platform/x86/intel/vbtn.c index 48f0ac19d6dd..79bb2c801daa 100644 --- a/drivers/platform/x86/intel/vbtn.c +++ b/drivers/platform/x86/intel/vbtn.c @@ -136,8 +136,6 @@ static int intel_vbtn_input_setup(struct platform_device *device) priv->switches_dev->id.bustype = BUS_HOST; if (priv->has_switches) { - detect_tablet_mode(&device->dev); - ret = input_register_device(priv->switches_dev); if (ret) return ret; @@ -312,6 +310,9 @@ static int intel_vbtn_probe(struct platform_device *device) if (ACPI_FAILURE(status)) dev_err(&device->dev, "Error VBDL failed with ACPI status %d\n", status); } + // Check switches after buttons since VBDL may have side effects. + if (has_switches) + detect_tablet_mode(&device->dev); device_init_wakeup(&device->dev, true); /* -- cgit v1.3.1 From e71c8481692582c70cdfd0996c20cdcc71e425d3 Mon Sep 17 00:00:00 2001 From: Gergo Koteles Date: Wed, 3 Apr 2024 16:34:27 +0200 Subject: platform/x86: lg-laptop: fix %s null argument warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit W=1 warns about null argument to kprintf: warning: ‘%s’ directive argument is null [-Wformat-overflow=] pr_info("product: %s year: %d\n", product, year); Use "unknown" instead of NULL. Signed-off-by: Gergo Koteles Reviewed-by: Kuppuswamy Sathyanarayanan Link: https://lore.kernel.org/r/33d40e976f08f82b9227d0ecae38c787fcc0c0b2.1712154684.git.soyer@irl.hu Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/lg-laptop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/lg-laptop.c b/drivers/platform/x86/lg-laptop.c index ad3c39e9e9f5..e714ee6298dd 100644 --- a/drivers/platform/x86/lg-laptop.c +++ b/drivers/platform/x86/lg-laptop.c @@ -736,7 +736,7 @@ static int acpi_add(struct acpi_device *device) default: year = 2019; } - pr_info("product: %s year: %d\n", product, year); + pr_info("product: %s year: %d\n", product ?: "unknown", year); if (year >= 2019) battery_limit_use_wmbb = 1; -- cgit v1.3.1 From 7b1f6b5aaec0f849e19c3e99d4eea75876853cdd Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 2 Apr 2024 18:50:03 +0300 Subject: drm/i915/cdclk: Fix CDCLK programming order when pipes are active MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we always reprogram CDCLK from the intel_set_cdclk_pre_plane_update() when using squash/crawl. The code only works correctly for the cd2x update or full modeset cases, and it was simply never updated to deal with squash/crawl. If the CDCLK frequency is increasing we must reprogram it before we do anything else that might depend on the new higher frequency, and conversely we must not decrease the frequency until everything that might still depend on the old higher frequency has been dealt with. Since cdclk_state->pipe is only relevant when doing a cd2x update we can't use it to determine the correct sequence during squash/crawl. To that end introduce cdclk_state->disable_pipes which simply indicates that we must perform the update while the pipes are disable (ie. during intel_set_cdclk_pre_plane_update()). Otherwise we use the same old vs. new CDCLK frequency comparsiong as for cd2x updates. The only remaining problem case is when the voltage_level needs to increase due to a DDI port, but the CDCLK frequency is decreasing (and not all pipes are being disabled). The current approach will not bump the voltage level up until after the port has already been enabled, which is too late. But we'll take care of that case separately. v2: Don't break the "must disable pipes case" v3: Keep the on stack 'pipe' for future use Cc: stable@vger.kernel.org Fixes: d62686ba3b54 ("drm/i915/adl_p: CDCLK crawl support for ADL") Reviewed-by: Uma Shankar Reviewed-by: Gustavo Sousa Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-2-ville.syrjala@linux.intel.com (cherry picked from commit 3aecee90ac12a351905f12dda7643d5b0676d6ca) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_cdclk.c | 7 +++++-- drivers/gpu/drm/i915/display/intel_cdclk.h | 3 +++ 2 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c index ed89b86ea625..4833479e2e17 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.c +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c @@ -2543,7 +2543,7 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state) if (IS_DG2(i915)) intel_cdclk_pcode_pre_notify(state); - if (pipe == INVALID_PIPE || + if (new_cdclk_state->disable_pipes || old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) { drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); @@ -2575,7 +2575,7 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state) if (IS_DG2(i915)) intel_cdclk_pcode_post_notify(state); - if (pipe != INVALID_PIPE && + if (!new_cdclk_state->disable_pipes && old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) { drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); @@ -3058,6 +3058,7 @@ static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_globa return NULL; cdclk_state->pipe = INVALID_PIPE; + cdclk_state->disable_pipes = false; return &cdclk_state->base; } @@ -3236,6 +3237,8 @@ int intel_modeset_calc_cdclk(struct intel_atomic_state *state) if (ret) return ret; + new_cdclk_state->disable_pipes = true; + drm_dbg_kms(&dev_priv->drm, "Modeset required for cdclk change\n"); } diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.h b/drivers/gpu/drm/i915/display/intel_cdclk.h index 48fd7d39e0cd..71bc032bfef1 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.h +++ b/drivers/gpu/drm/i915/display/intel_cdclk.h @@ -51,6 +51,9 @@ struct intel_cdclk_state { /* bitmask of active pipes */ u8 active_pipes; + + /* update cdclk with pipes disabled */ + bool disable_pipes; }; int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state); -- cgit v1.3.1 From 6154cc9177ccea00c89ce0bf93352e474b819ff2 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Tue, 2 Apr 2024 18:50:04 +0300 Subject: drm/i915/cdclk: Fix voltage_level programming edge case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently we only consider the relationship of the old and new CDCLK frequencies when determining whether to do the repgramming from intel_set_cdclk_pre_plane_update() or intel_set_cdclk_post_plane_update(). It is technically possible to have a situation where the CDCLK frequency is decreasing, but the voltage_level is increasing due a DDI port. In this case we should bump the voltage level already in intel_set_cdclk_pre_plane_update() (so that the voltage_level will have been increased by the time the port gets enabled), while leaving the CDCLK frequency unchanged (as active planes/etc. may still depend on it). We can then reduce the CDCLK frequency to its final value from intel_set_cdclk_post_plane_update(). In order to handle that correctly we shall construct a suitable amalgam of the old and new cdclk states in intel_set_cdclk_pre_plane_update(). And we can simply call intel_set_cdclk() unconditionally in both places as it will not do anything if nothing actually changes vs. the current hw state. v2: Handle cdclk_state->disable_pipes v3: Only synchronize the cd2x update against the pipe's vblank when the cdclk frequency is changing during the current commit phase (Gustavo) Cc: stable@vger.kernel.org Cc: Gustavo Sousa Reviewed-by: Uma Shankar Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20240402155016.13733-3-ville.syrjala@linux.intel.com (cherry picked from commit 34d127e2bdef73a923aa0dcd95cbc3257ad5af52) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_cdclk.c | 37 ++++++++++++++++++++++-------- 1 file changed, 27 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c index 4833479e2e17..f672bfd70d45 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.c +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c @@ -2534,7 +2534,8 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state) intel_atomic_get_old_cdclk_state(state); const struct intel_cdclk_state *new_cdclk_state = intel_atomic_get_new_cdclk_state(state); - enum pipe pipe = new_cdclk_state->pipe; + struct intel_cdclk_config cdclk_config; + enum pipe pipe; if (!intel_cdclk_changed(&old_cdclk_state->actual, &new_cdclk_state->actual)) @@ -2543,12 +2544,25 @@ intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state) if (IS_DG2(i915)) intel_cdclk_pcode_pre_notify(state); - if (new_cdclk_state->disable_pipes || - old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) { - drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); + if (new_cdclk_state->disable_pipes) { + cdclk_config = new_cdclk_state->actual; + pipe = INVALID_PIPE; + } else { + if (new_cdclk_state->actual.cdclk >= old_cdclk_state->actual.cdclk) { + cdclk_config = new_cdclk_state->actual; + pipe = new_cdclk_state->pipe; + } else { + cdclk_config = old_cdclk_state->actual; + pipe = INVALID_PIPE; + } - intel_set_cdclk(i915, &new_cdclk_state->actual, pipe); + cdclk_config.voltage_level = max(new_cdclk_state->actual.voltage_level, + old_cdclk_state->actual.voltage_level); } + + drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); + + intel_set_cdclk(i915, &cdclk_config, pipe); } /** @@ -2566,7 +2580,7 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state) intel_atomic_get_old_cdclk_state(state); const struct intel_cdclk_state *new_cdclk_state = intel_atomic_get_new_cdclk_state(state); - enum pipe pipe = new_cdclk_state->pipe; + enum pipe pipe; if (!intel_cdclk_changed(&old_cdclk_state->actual, &new_cdclk_state->actual)) @@ -2576,11 +2590,14 @@ intel_set_cdclk_post_plane_update(struct intel_atomic_state *state) intel_cdclk_pcode_post_notify(state); if (!new_cdclk_state->disable_pipes && - old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) { - drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); + new_cdclk_state->actual.cdclk < old_cdclk_state->actual.cdclk) + pipe = new_cdclk_state->pipe; + else + pipe = INVALID_PIPE; - intel_set_cdclk(i915, &new_cdclk_state->actual, pipe); - } + drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed); + + intel_set_cdclk(i915, &new_cdclk_state->actual, pipe); } static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state) -- cgit v1.3.1 From 12bcd9108f9d3b8d4b5f4418bd16df4628b6fa8f Mon Sep 17 00:00:00 2001 From: Suraj Kandpal Date: Mon, 1 Apr 2024 11:26:53 +0530 Subject: drm/i915/hdcp: Fix get remote hdcp capability function HDCP 1.x capability needs to be checked even if setup is not HDCP 2.x capable. --v2 -Assign hdcp_capable and hdcp2_capable to false [Chaitanya] --v3 -Fix variable assignment [Chaitanya] Fixes: 813cca96e4ac ("drm/i915/hdcp: Add new remote capability check shim function") Signed-off-by: Suraj Kandpal Reviewed-by: Chaitanya Kumar Borah Signed-off-by: Animesh Manna Link: https://patchwork.freedesktop.org/patch/msgid/20240401055652.276785-2-suraj.kandpal@intel.com (cherry picked from commit 6809f9246d43f7cb07310ca6a3deb7aa1c0ea938) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c index b98a87883fef..9db43bd81ce2 100644 --- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c +++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c @@ -691,12 +691,15 @@ int intel_dp_hdcp_get_remote_capability(struct intel_connector *connector, u8 bcaps; int ret; + *hdcp_capable = false; + *hdcp2_capable = false; if (!intel_encoder_is_mst(connector->encoder)) return -EINVAL; ret = _intel_dp_hdcp2_get_capability(aux, hdcp2_capable); if (ret) - return ret; + drm_dbg_kms(&i915->drm, + "HDCP2 DPCD capability read failed err: %d\n", ret); ret = intel_dp_hdcp_read_bcaps(aux, i915, &bcaps); if (ret) -- cgit v1.3.1 From 152191e5e94bba55c938c18688e66c7276b765a7 Mon Sep 17 00:00:00 2001 From: John Harrison Date: Fri, 29 Mar 2024 16:53:05 -0700 Subject: drm/i915/guc: Fix the fix for reset lock confusion The previous fix for the circlular lock splat about the busyness worker wasn't quite complete. Even though the reset-in-progress flag is cleared at the start of intel_uc_reset_finish, the entire function is still inside the reset mutex lock. Not sure why the patch appeared to fix the issue both locally and in CI. However, it is now back again. There is a further complication that the wedge code path within intel_gt_reset() jumps around so much that it results in nested reset_prepare/_finish calls. That is, the call sequence is: intel_gt_reset | reset_prepare | __intel_gt_set_wedged | | reset_prepare | | reset_finish | reset_finish The nested finish means that even if the clear of the in-progress flag was moved to the end of _finish, it would still be clear for the entire second call. Surprisingly, this does not seem to be causing any other problems at present. As an aside, a wedge on fini does not call the finish functions at all. The reset_in_progress flag is left set (twice). So instead of trying to cancel the worker anywhere at all in the reset path, just add a cancel to intel_guc_submission_fini instead. Note that it is not a problem if the worker is still active during a reset. Either it will run before the reset path starts locking things and will simply block the reset code for a tiny amount of time. Or it will run after the locks have been acquired and will early exit due to the try-lock. Also, do not use the reset-in-progress flag to decide whether a synchronous cancel is safe (from a lockdep perspective) or not. Instead, use the actual reset mutex state (both the genuine one and the custom rolled BACKOFF one). Fixes: 0e00a8814eec ("drm/i915/guc: Avoid circular locking issue on busyness flush") Signed-off-by: John Harrison Cc: Zhanjun Dong Cc: John Harrison Cc: Andi Shyti Cc: Daniel Vetter Cc: Daniel Vetter Cc: Rodrigo Vivi Cc: Nirmoy Das Cc: Tvrtko Ursulin Cc: Umesh Nerlige Ramappa Cc: Andrzej Hajda Cc: Matt Roper Cc: Jonathan Cavitt Cc: Prathap Kumar Valsan Cc: Alan Previn Cc: Madhumitha Tolakanahalli Pradeep Cc: Daniele Ceraolo Spurio Cc: Ashutosh Dixit Cc: Dnyaneshwar Bhadane Reviewed-by: Nirmoy Das Reviewed-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/20240329235306.1559639-1-John.C.Harrison@Intel.com (cherry picked from commit 3563d855312acedcd445a3767f0cb07906f1c26f) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c | 23 +++++++++-------------- drivers/gpu/drm/i915/gt/uc/intel_uc.c | 4 ++++ 2 files changed, 13 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c index f3dcae4b9d45..0f83c6d4376f 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c @@ -1403,14 +1403,17 @@ static void guc_cancel_busyness_worker(struct intel_guc *guc) * Trying to pass a 'need_sync' or 'in_reset' flag all the way down through * every possible call stack is unfeasible. It would be too intrusive to many * areas that really don't care about the GuC backend. However, there is the - * 'reset_in_progress' flag available, so just use that. + * I915_RESET_BACKOFF flag and the gt->reset.mutex can be tested for is_locked. + * So just use those. Note that testing both is required due to the hideously + * complex nature of the i915 driver's reset code paths. * * And note that in the case of a reset occurring during driver unload - * (wedge_on_fini), skipping the cancel in _prepare (when the reset flag is set - * is fine because there is another cancel in _finish (when the reset flag is - * not). + * (wedged_on_fini), skipping the cancel in reset_prepare/reset_fini (when the + * reset flag/mutex are set) is fine because there is another explicit cancel in + * intel_guc_submission_fini (when the reset flag/mutex are not). */ - if (guc_to_gt(guc)->uc.reset_in_progress) + if (mutex_is_locked(&guc_to_gt(guc)->reset.mutex) || + test_bit(I915_RESET_BACKOFF, &guc_to_gt(guc)->reset.flags)) cancel_delayed_work(&guc->timestamp.work); else cancel_delayed_work_sync(&guc->timestamp.work); @@ -1424,8 +1427,6 @@ static void __reset_guc_busyness_stats(struct intel_guc *guc) unsigned long flags; ktime_t unused; - guc_cancel_busyness_worker(guc); - spin_lock_irqsave(&guc->timestamp.lock, flags); guc_update_pm_timestamp(guc, &unused); @@ -2004,13 +2005,6 @@ void intel_guc_submission_cancel_requests(struct intel_guc *guc) void intel_guc_submission_reset_finish(struct intel_guc *guc) { - /* - * Ensure the busyness worker gets cancelled even on a fatal wedge. - * Note that reset_prepare is not allowed to because it confuses lockdep. - */ - if (guc_submission_initialized(guc)) - guc_cancel_busyness_worker(guc); - /* Reset called during driver load or during wedge? */ if (unlikely(!guc_submission_initialized(guc) || !intel_guc_is_fw_running(guc) || @@ -2136,6 +2130,7 @@ void intel_guc_submission_fini(struct intel_guc *guc) if (!guc->submission_initialized) return; + guc_fini_engine_stats(guc); guc_flush_destroyed_contexts(guc); guc_lrc_desc_pool_destroy_v69(guc); i915_sched_engine_put(guc->sched_engine); diff --git a/drivers/gpu/drm/i915/gt/uc/intel_uc.c b/drivers/gpu/drm/i915/gt/uc/intel_uc.c index 6dfe5d9456c6..399bc319180b 100644 --- a/drivers/gpu/drm/i915/gt/uc/intel_uc.c +++ b/drivers/gpu/drm/i915/gt/uc/intel_uc.c @@ -637,6 +637,10 @@ void intel_uc_reset_finish(struct intel_uc *uc) { struct intel_guc *guc = &uc->guc; + /* + * NB: The wedge code path results in prepare -> prepare -> finish -> finish. + * So this function is sometimes called with the in-progress flag not set. + */ uc->reset_in_progress = false; /* Firmware expected to be running when this function is called */ -- cgit v1.3.1 From e3d4ead4d48c05355bd3b99c8162428f68c3c1a5 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 5 Apr 2024 00:34:26 +0300 Subject: drm/i915/psr: Disable PSR when bigjoiner is used MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Bigjoiner seem to be causing all kinds of grief to the PSR code currently. I don't believe there is any hardware issue but the code simply not handling this correctly. For now just disable PSR when bigjoiner is needed. Cc: stable@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-3-ville.syrjala@linux.intel.com Reviewed-by: Arun R Murthy Acked-by: Jouni Högander Signed-off-by: Ville Syrjälä (cherry picked from commit 372fa0c79d3f289f813d8001e0a8a96d1011826c) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_psr.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index b6e539f1342c..aabd018bd737 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -1422,6 +1422,17 @@ void intel_psr_compute_config(struct intel_dp *intel_dp, return; } + /* + * FIXME figure out what is wrong with PSR+bigjoiner and + * fix it. Presumably something related to the fact that + * PSR is a transcoder level feature. + */ + if (crtc_state->bigjoiner_pipes) { + drm_dbg_kms(&dev_priv->drm, + "PSR disabled due to bigjoiner\n"); + return; + } + if (CAN_PANEL_REPLAY(intel_dp)) crtc_state->has_panel_replay = true; else -- cgit v1.3.1 From 0653d501409eeb9f1deb7e4c12e4d0d2c9f1cba1 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 5 Apr 2024 00:34:27 +0300 Subject: drm/i915: Disable port sync when bigjoiner is used MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The current modeset sequence can't handle port sync and bigjoiner at the same time. Refuse port sync when bigjoiner is needed, at least until we fix the modeset sequence. v2: Add a FIXME (Vandite) Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas Reviewed-by: Vandita Kulkarni Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-4-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä (cherry picked from commit b37e1347b991459c38c56ec2476087854a4f720b) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_ddi.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index c587a8efeafc..c17462b4c2ac 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -4256,7 +4256,12 @@ static bool m_n_equal(const struct intel_link_m_n *m_n_1, static bool crtcs_port_sync_compatible(const struct intel_crtc_state *crtc_state1, const struct intel_crtc_state *crtc_state2) { + /* + * FIXME the modeset sequence is currently wrong and + * can't deal with bigjoiner + port sync at the same time. + */ return crtc_state1->hw.active && crtc_state2->hw.active && + !crtc_state1->bigjoiner_pipes && !crtc_state2->bigjoiner_pipes && crtc_state1->output_types == crtc_state2->output_types && crtc_state1->output_format == crtc_state2->output_format && crtc_state1->lane_count == crtc_state2->lane_count && -- cgit v1.3.1 From 4a36e46df7aa781c756f09727d37dc2783f1ee75 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 5 Apr 2024 00:34:28 +0300 Subject: drm/i915: Disable live M/N updates when using bigjoiner MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change the timings at the same time. For now just disable live M/N updates when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas Reviewed-by: Arun R Murthy Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-5-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä (cherry picked from commit ef79820db723a2a7c229a7251c12859e7e25a247) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_dp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index abd62bebc46d..e583515f9b25 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -2725,7 +2725,11 @@ intel_dp_drrs_compute_config(struct intel_connector *connector, intel_panel_downclock_mode(connector, &pipe_config->hw.adjusted_mode); int pixel_clock; - if (has_seamless_m_n(connector)) + /* + * FIXME all joined pipes share the same transcoder. + * Need to account for that when updating M/N live. + */ + if (has_seamless_m_n(connector) && !pipe_config->bigjoiner_pipes) pipe_config->update_m_n = true; if (!can_enable_drrs(connector, pipe_config, downclock_mode)) { -- cgit v1.3.1 From dcd8992e47f13afb5c11a61e8d9c141c35e23751 Mon Sep 17 00:00:00 2001 From: Ville Syrjälä Date: Fri, 5 Apr 2024 00:34:29 +0300 Subject: drm/i915/vrr: Disable VRR when using bigjoiner MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All joined pipes share the same transcoder/timing generator. Currently we just do the commits per-pipe, which doesn't really work if we need to change switch between non-VRR and VRR timings generators on the fly, or even when sending the push to the transcoder. For now just disable VRR when bigjoiner is needed. Cc: stable@vger.kernel.org Tested-by: Vidya Srinivas Reviewed-by: Vandita Kulkarni Link: https://patchwork.freedesktop.org/patch/msgid/20240404213441.17637-6-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä (cherry picked from commit f9d5e51db65652dbd8a2102fd7619440e3599fd2) Signed-off-by: Rodrigo Vivi --- drivers/gpu/drm/i915/display/intel_vrr.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/display/intel_vrr.c b/drivers/gpu/drm/i915/display/intel_vrr.c index eb5bd0743902..f542ee1db1d9 100644 --- a/drivers/gpu/drm/i915/display/intel_vrr.c +++ b/drivers/gpu/drm/i915/display/intel_vrr.c @@ -117,6 +117,13 @@ intel_vrr_compute_config(struct intel_crtc_state *crtc_state, const struct drm_display_info *info = &connector->base.display_info; int vmin, vmax; + /* + * FIXME all joined pipes share the same transcoder. + * Need to account for that during VRR toggle/push/etc. + */ + if (crtc_state->bigjoiner_pipes) + return; + if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) return; -- cgit v1.3.1 From 8db8f6ce556af60ca9a9fd5e826d369ded70fcc7 Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Wed, 3 Apr 2024 18:50:03 +0530 Subject: scsi: ufs: qcom: Add missing interconnect bandwidth values for Gear 5 These entries are necessary to scale the interconnect bandwidth while operating in Gear 5. Cc: Amit Pundir Fixes: 03ce80a1bb86 ("scsi: ufs: qcom: Add support for scaling interconnects") Tested-by: Amit Pundir Signed-off-by: Manivannan Sadhasivam Link: https://lore.kernel.org/r/20240403-ufs-icc-fix-v2-1-958412a5eb45@linaro.org Signed-off-by: Martin K. Petersen --- drivers/ufs/host/ufs-qcom.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 06859e17b67b..7a00004bfd03 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -47,7 +47,7 @@ enum { TSTBUS_MAX, }; -#define QCOM_UFS_MAX_GEAR 4 +#define QCOM_UFS_MAX_GEAR 5 #define QCOM_UFS_MAX_LANE 2 enum { @@ -67,26 +67,32 @@ static const struct __ufs_qcom_bw_table { [MODE_PWM][UFS_PWM_G2][UFS_LANE_1] = { 1844, 1000 }, [MODE_PWM][UFS_PWM_G3][UFS_LANE_1] = { 3688, 1000 }, [MODE_PWM][UFS_PWM_G4][UFS_LANE_1] = { 7376, 1000 }, + [MODE_PWM][UFS_PWM_G5][UFS_LANE_1] = { 14752, 1000 }, [MODE_PWM][UFS_PWM_G1][UFS_LANE_2] = { 1844, 1000 }, [MODE_PWM][UFS_PWM_G2][UFS_LANE_2] = { 3688, 1000 }, [MODE_PWM][UFS_PWM_G3][UFS_LANE_2] = { 7376, 1000 }, [MODE_PWM][UFS_PWM_G4][UFS_LANE_2] = { 14752, 1000 }, + [MODE_PWM][UFS_PWM_G5][UFS_LANE_2] = { 29504, 1000 }, [MODE_HS_RA][UFS_HS_G1][UFS_LANE_1] = { 127796, 1000 }, [MODE_HS_RA][UFS_HS_G2][UFS_LANE_1] = { 255591, 1000 }, [MODE_HS_RA][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, [MODE_HS_RA][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, + [MODE_HS_RA][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, [MODE_HS_RA][UFS_HS_G1][UFS_LANE_2] = { 255591, 1000 }, [MODE_HS_RA][UFS_HS_G2][UFS_LANE_2] = { 511181, 1000 }, [MODE_HS_RA][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, [MODE_HS_RA][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, + [MODE_HS_RA][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, [MODE_HS_RB][UFS_HS_G1][UFS_LANE_1] = { 149422, 1000 }, [MODE_HS_RB][UFS_HS_G2][UFS_LANE_1] = { 298189, 1000 }, [MODE_HS_RB][UFS_HS_G3][UFS_LANE_1] = { 1492582, 102400 }, [MODE_HS_RB][UFS_HS_G4][UFS_LANE_1] = { 2915200, 204800 }, + [MODE_HS_RB][UFS_HS_G5][UFS_LANE_1] = { 5836800, 409600 }, [MODE_HS_RB][UFS_HS_G1][UFS_LANE_2] = { 298189, 1000 }, [MODE_HS_RB][UFS_HS_G2][UFS_LANE_2] = { 596378, 1000 }, [MODE_HS_RB][UFS_HS_G3][UFS_LANE_2] = { 1492582, 204800 }, [MODE_HS_RB][UFS_HS_G4][UFS_LANE_2] = { 2915200, 409600 }, + [MODE_HS_RB][UFS_HS_G5][UFS_LANE_2] = { 5836800, 819200 }, [MODE_MAX][0][0] = { 7643136, 307200 }, }; -- cgit v1.3.1 From ca91259b775f6fd98ae5d23bb4eec101d468ba8d Mon Sep 17 00:00:00 2001 From: Bart Van Assche Date: Mon, 25 Mar 2024 15:44:17 -0700 Subject: scsi: core: Fix handling of SCMD_FAIL_IF_RECOVERING There is code in the SCSI core that sets the SCMD_FAIL_IF_RECOVERING flag but there is no code that clears this flag. Instead of only clearing SCMD_INITIALIZED in scsi_end_request(), clear all flags. It is never necessary to preserve any command flags inside scsi_end_request(). Cc: stable@vger.kernel.org Fixes: 310bcaef6d7e ("scsi: core: Support failing requests while recovering") Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20240325224417.1477135-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen --- drivers/scsi/scsi_lib.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 2e28e2360c85..5b3230ef51fe 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -635,10 +635,9 @@ static bool scsi_end_request(struct request *req, blk_status_t error, if (blk_queue_add_random(q)) add_disk_randomness(req->q->disk); - if (!blk_rq_is_passthrough(req)) { - WARN_ON_ONCE(!(cmd->flags & SCMD_INITIALIZED)); - cmd->flags &= ~SCMD_INITIALIZED; - } + WARN_ON_ONCE(!blk_rq_is_passthrough(req) && + !(cmd->flags & SCMD_INITIALIZED)); + cmd->flags = 0; /* * Calling rcu_barrier() is not necessary here because the -- cgit v1.3.1 From f96f700449b6d190e06272f1cf732ae8e45b73df Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 5 Apr 2024 22:30:39 +0200 Subject: net: ks8851: Inline ks8851_rx_skb() Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb), inline the netif_rx(skb) call directly into ks8851_common.c and drop the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one indirect call from the driver, no functional change otherwise. Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20240405203204.82062-1-marex@denx.de Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/micrel/ks8851.h | 3 --- drivers/net/ethernet/micrel/ks8851_common.c | 12 +----------- drivers/net/ethernet/micrel/ks8851_par.c | 11 ----------- drivers/net/ethernet/micrel/ks8851_spi.c | 11 ----------- 4 files changed, 1 insertion(+), 36 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ks8851.h b/drivers/net/ethernet/micrel/ks8851.h index e5ec0a363aff..31f75b4a67fd 100644 --- a/drivers/net/ethernet/micrel/ks8851.h +++ b/drivers/net/ethernet/micrel/ks8851.h @@ -368,7 +368,6 @@ union ks8851_tx_hdr { * @rdfifo: FIFO read callback * @wrfifo: FIFO write callback * @start_xmit: start_xmit() implementation callback - * @rx_skb: rx_skb() implementation callback * @flush_tx_work: flush_tx_work() implementation callback * * The @statelock is used to protect information in the structure which may @@ -423,8 +422,6 @@ struct ks8851_net { struct sk_buff *txp, bool irq); netdev_tx_t (*start_xmit)(struct sk_buff *skb, struct net_device *dev); - void (*rx_skb)(struct ks8851_net *ks, - struct sk_buff *skb); void (*flush_tx_work)(struct ks8851_net *ks); }; diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index 0bf13b38b8f5..896d43bb8883 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -231,16 +231,6 @@ static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt) rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]); } -/** - * ks8851_rx_skb - receive skbuff - * @ks: The device state. - * @skb: The skbuff - */ -static void ks8851_rx_skb(struct ks8851_net *ks, struct sk_buff *skb) -{ - ks->rx_skb(ks, skb); -} - /** * ks8851_rx_pkts - receive packets from the host * @ks: The device information. @@ -309,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) ks8851_dbg_dumpkkt(ks, rxpkt); skb->protocol = eth_type_trans(skb, ks->netdev); - ks8851_rx_skb(ks, skb); + netif_rx(skb); ks->netdev->stats.rx_packets++; ks->netdev->stats.rx_bytes += rxlen; diff --git a/drivers/net/ethernet/micrel/ks8851_par.c b/drivers/net/ethernet/micrel/ks8851_par.c index 2a7f29854267..381b9cd285eb 100644 --- a/drivers/net/ethernet/micrel/ks8851_par.c +++ b/drivers/net/ethernet/micrel/ks8851_par.c @@ -210,16 +210,6 @@ static void ks8851_wrfifo_par(struct ks8851_net *ks, struct sk_buff *txp, iowrite16_rep(ksp->hw_addr, txp->data, len / 2); } -/** - * ks8851_rx_skb_par - receive skbuff - * @ks: The device state. - * @skb: The skbuff - */ -static void ks8851_rx_skb_par(struct ks8851_net *ks, struct sk_buff *skb) -{ - netif_rx(skb); -} - static unsigned int ks8851_rdreg16_par_txqcr(struct ks8851_net *ks) { return ks8851_rdreg16_par(ks, KS_TXQCR); @@ -298,7 +288,6 @@ static int ks8851_probe_par(struct platform_device *pdev) ks->rdfifo = ks8851_rdfifo_par; ks->wrfifo = ks8851_wrfifo_par; ks->start_xmit = ks8851_start_xmit_par; - ks->rx_skb = ks8851_rx_skb_par; #define STD_IRQ (IRQ_LCI | /* Link Change */ \ IRQ_RXI | /* RX done */ \ diff --git a/drivers/net/ethernet/micrel/ks8851_spi.c b/drivers/net/ethernet/micrel/ks8851_spi.c index 2f803377c9f9..670c1de966db 100644 --- a/drivers/net/ethernet/micrel/ks8851_spi.c +++ b/drivers/net/ethernet/micrel/ks8851_spi.c @@ -298,16 +298,6 @@ static unsigned int calc_txlen(unsigned int len) return ALIGN(len + 4, 4); } -/** - * ks8851_rx_skb_spi - receive skbuff - * @ks: The device state - * @skb: The skbuff - */ -static void ks8851_rx_skb_spi(struct ks8851_net *ks, struct sk_buff *skb) -{ - netif_rx(skb); -} - /** * ks8851_tx_work - process tx packet(s) * @work: The work strucutre what was scheduled. @@ -435,7 +425,6 @@ static int ks8851_probe_spi(struct spi_device *spi) ks->rdfifo = ks8851_rdfifo_spi; ks->wrfifo = ks8851_wrfifo_spi; ks->start_xmit = ks8851_start_xmit_spi; - ks->rx_skb = ks8851_rx_skb_spi; ks->flush_tx_work = ks8851_flush_tx_work_spi; #define STD_IRQ (IRQ_LCI | /* Link Change */ \ -- cgit v1.3.1 From be0384bf599cf1eb8d337517feeb732d71f75a6f Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 5 Apr 2024 22:30:40 +0200 Subject: net: ks8851: Handle softirqs at the end of IRQ thread to fix hang The ks8851_irq() thread may call ks8851_rx_pkts() in case there are any packets in the MAC FIFO, which calls netif_rx(). This netif_rx() implementation is guarded by local_bh_disable() and local_bh_enable(). The local_bh_enable() may call do_softirq() to run softirqs in case any are pending. One of the softirqs is net_rx_action, which ultimately reaches the driver .start_xmit callback. If that happens, the system hangs. The entire call chain is below: ks8851_start_xmit_par from netdev_start_xmit netdev_start_xmit from dev_hard_start_xmit dev_hard_start_xmit from sch_direct_xmit sch_direct_xmit from __dev_queue_xmit __dev_queue_xmit from __neigh_update __neigh_update from neigh_update neigh_update from arp_process.constprop.0 arp_process.constprop.0 from __netif_receive_skb_one_core __netif_receive_skb_one_core from process_backlog process_backlog from __napi_poll.constprop.0 __napi_poll.constprop.0 from net_rx_action net_rx_action from __do_softirq __do_softirq from call_with_stack call_with_stack from do_softirq do_softirq from __local_bh_enable_ip __local_bh_enable_ip from netif_rx netif_rx from ks8851_irq ks8851_irq from irq_thread_fn irq_thread_fn from irq_thread irq_thread from kthread kthread from ret_from_fork The hang happens because ks8851_irq() first locks a spinlock in ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...) and with that spinlock locked, calls netif_rx(). Once the execution reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again which attempts to claim the already locked spinlock again, and the hang happens. Move the do_softirq() call outside of the spinlock protected section of ks8851_irq() by disabling BHs around the entire spinlock protected section of ks8851_irq() handler. Place local_bh_enable() outside of the spinlock protected section, so that it can trigger do_softirq() without the ks8851_par.c ks8851_lock_par() spinlock being held, and safely call ks8851_start_xmit_par() without attempting to lock the already locked spinlock. Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable() now, replace netif_rx() with __netif_rx() which is not duplicating the local_bh_disable()/local_bh_enable() calls. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20240405203204.82062-2-marex@denx.de Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/micrel/ks8851_common.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c index 896d43bb8883..d4cdf3d4f552 100644 --- a/drivers/net/ethernet/micrel/ks8851_common.c +++ b/drivers/net/ethernet/micrel/ks8851_common.c @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks) ks8851_dbg_dumpkkt(ks, rxpkt); skb->protocol = eth_type_trans(skb, ks->netdev); - netif_rx(skb); + __netif_rx(skb); ks->netdev->stats.rx_packets++; ks->netdev->stats.rx_bytes += rxlen; @@ -330,6 +330,8 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) unsigned long flags; unsigned int status; + local_bh_disable(); + ks8851_lock(ks, &flags); status = ks8851_rdreg16(ks, KS_ISR); @@ -406,6 +408,8 @@ static irqreturn_t ks8851_irq(int irq, void *_ks) if (status & IRQ_LCI) mii_check_link(&ks->mii); + local_bh_enable(); + return IRQ_HANDLED; } -- cgit v1.3.1 From 718c4fb221dbeff9072810841b949413c5ffc345 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 8 Apr 2024 16:42:43 +1000 Subject: nouveau: fix devinit paths to only handle display on GSP. This reverts: nouveau/gsp: don't check devinit disable on GSP. and applies a further fix. It turns out the open gpu driver, checks this register, but only for display. Match that behaviour and in the turing path only disable the display block. (ampere already only does displays). Fixes: 5d4e8ae6e57b ("nouveau/gsp: don't check devinit disable on GSP.") Reviewed-by: Danilo Krummrich Signed-off-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20240408064243.2219527-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c | 12 ++++++++---- drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c | 1 + 2 files changed, 9 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c index 7bcbc4895ec2..271bfa038f5b 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/gm107.c @@ -25,6 +25,7 @@ #include #include +#include void gm107_devinit_disable(struct nvkm_devinit *init) @@ -33,10 +34,13 @@ gm107_devinit_disable(struct nvkm_devinit *init) u32 r021c00 = nvkm_rd32(device, 0x021c00); u32 r021c04 = nvkm_rd32(device, 0x021c04); - if (r021c00 & 0x00000001) - nvkm_subdev_disable(device, NVKM_ENGINE_CE, 0); - if (r021c00 & 0x00000004) - nvkm_subdev_disable(device, NVKM_ENGINE_CE, 2); + /* gsp only wants to enable/disable display */ + if (!nvkm_gsp_rm(device->gsp)) { + if (r021c00 & 0x00000001) + nvkm_subdev_disable(device, NVKM_ENGINE_CE, 0); + if (r021c00 & 0x00000004) + nvkm_subdev_disable(device, NVKM_ENGINE_CE, 2); + } if (r021c04 & 0x00000001) nvkm_subdev_disable(device, NVKM_ENGINE_DISP, 0); } diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c index 11b4c9c274a1..666eb93b1742 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/devinit/r535.c @@ -41,6 +41,7 @@ r535_devinit_new(const struct nvkm_devinit_func *hw, rm->dtor = r535_devinit_dtor; rm->post = hw->post; + rm->disable = hw->disable; ret = nv50_devinit_new_(rm, device, type, inst, pdevinit); if (ret) -- cgit v1.3.1 From 80e9963fb3b5509dfcabe9652d56bf4b35542055 Mon Sep 17 00:00:00 2001 From: Nianyao Tang Date: Sat, 6 Apr 2024 02:27:37 +0000 Subject: irqchip/gic-v3-its: Fix VSYNC referencing an unmapped VPE on GIC v4.1 As per the GICv4.1 spec (Arm IHI 0069H, 5.3.19): "A VMAPP with {V, Alloc}=={0, x} is self-synchronizing, This means the ITS command queue does not show the command as consumed until all of its effects are completed." Furthermore, VSYNC is allowed to deliver an SError when referencing a non existent VPE. By these definitions, a VMAPP followed by a VSYNC is a bug, as the later references a VPE that has been unmapped by the former. Fix it by eliding the VSYNC in this scenario. Fixes: 64edfaa9a234 ("irqchip/gic-v4.1: Implement the v4.1 flavour of VMAPP") Signed-off-by: Nianyao Tang Signed-off-by: Thomas Gleixner Reviewed-by: Marc Zyngier Reviewed-by: Zenghui Yu Link: https://lore.kernel.org/r/20240406022737.3898763-1-tangnianyao@huawei.com --- drivers/irqchip/irq-gic-v3-its.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index fca888b36680..2a537cbfcb07 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -786,6 +786,7 @@ static struct its_vpe *its_build_vmapp_cmd(struct its_node *its, struct its_cmd_block *cmd, struct its_cmd_desc *desc) { + struct its_vpe *vpe = valid_vpe(its, desc->its_vmapp_cmd.vpe); unsigned long vpt_addr, vconf_addr; u64 target; bool alloc; @@ -798,6 +799,11 @@ static struct its_vpe *its_build_vmapp_cmd(struct its_node *its, if (is_v4_1(its)) { alloc = !atomic_dec_return(&desc->its_vmapp_cmd.vpe->vmapp_count); its_encode_alloc(cmd, alloc); + /* + * Unmapping a VPE is self-synchronizing on GICv4.1, + * no need to issue a VSYNC. + */ + vpe = NULL; } goto out; @@ -832,7 +838,7 @@ static struct its_vpe *its_build_vmapp_cmd(struct its_node *its, out: its_fixup_cmd(cmd); - return valid_vpe(its, desc->its_vmapp_cmd.vpe); + return vpe; } static struct its_vpe *its_build_vmapti_cmd(struct its_node *its, -- cgit v1.3.1 From faf23006185e777db18912685922c5ddb2df383f Mon Sep 17 00:00:00 2001 From: Geetha sowjanya Date: Mon, 8 Apr 2024 12:06:43 +0530 Subject: octeontx2-af: Fix NIX SQ mode and BP config NIX SQ mode and link backpressure configuration is required for all platforms. But in current driver this code is wrongly placed under specific platform check. This patch fixes the issue by moving the code out of platform check. Fixes: 5d9b976d4480 ("octeontx2-af: Support fixed transmit scheduler topology") Signed-off-by: Geetha sowjanya Link: https://lore.kernel.org/r/20240408063643.26288-1-gakula@marvell.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c index d39001cdc707..00af8888e329 100644 --- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c +++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c @@ -4819,18 +4819,18 @@ static int rvu_nix_block_init(struct rvu *rvu, struct nix_hw *nix_hw) */ rvu_write64(rvu, blkaddr, NIX_AF_CFG, rvu_read64(rvu, blkaddr, NIX_AF_CFG) | 0x40ULL); + } - /* Set chan/link to backpressure TL3 instead of TL2 */ - rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01); + /* Set chan/link to backpressure TL3 instead of TL2 */ + rvu_write64(rvu, blkaddr, NIX_AF_PSE_CHANNEL_LEVEL, 0x01); - /* Disable SQ manager's sticky mode operation (set TM6 = 0) - * This sticky mode is known to cause SQ stalls when multiple - * SQs are mapped to same SMQ and transmitting pkts at a time. - */ - cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS); - cfg &= ~BIT_ULL(15); - rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg); - } + /* Disable SQ manager's sticky mode operation (set TM6 = 0) + * This sticky mode is known to cause SQ stalls when multiple + * SQs are mapped to same SMQ and transmitting pkts at a time. + */ + cfg = rvu_read64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS); + cfg &= ~BIT_ULL(15); + rvu_write64(rvu, blkaddr, NIX_AF_SQM_DBG_CTL_STATUS, cfg); ltdefs = rvu->kpu.lt_def; /* Calibrate X2P bus to check if CGX/LBK links are fine */ -- cgit v1.3.1 From 638441bed666619b4275f68bbca9d1cd731a2063 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 16 Mar 2024 12:30:09 +0300 Subject: serial: 8250_lpc18xx: disable clks on error in probe() Goto the clean up path to clean up a couple clocks before returning on this error path. Fixes: 0087b9e694ee ("serial: 8250_lpc18xx: Switch to use uart_read_port_properties()") Signed-off-by: Dan Carpenter Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/92646c10-e0b5-4117-a9ac-ce9987d33ce3@moroto.mountain Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_lpc18xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c index 7984ee05af1d..47e1a056a60c 100644 --- a/drivers/tty/serial/8250/8250_lpc18xx.c +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -151,7 +151,7 @@ static int lpc18xx_serial_probe(struct platform_device *pdev) ret = uart_read_port_properties(&uart.port); if (ret) - return ret; + goto dis_uart_clk; uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; -- cgit v1.3.1 From 7dfae6cbadc1ac99e38ad19fb08810b31ff167be Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 17 Mar 2024 22:41:23 +0100 Subject: serial: 8250_dw: Revert: Do not reclock if already at correct rate Commit e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") breaks the dw UARTs on Intel Bay Trail (BYT) and Cherry Trail (CHT) SoCs. Before this change the RTL8732BS Bluetooth HCI which is found connected over the dw UART on both BYT and CHT boards works properly: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: RTL: fw version 0x365d462e where as after this change probing it fails: Bluetooth: hci0: RTL: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8723bs_config-OBDA8723.bin Bluetooth: hci0: RTL: cfg_sz 64, total sz 24508 Bluetooth: hci0: command 0xfc20 tx timeout Bluetooth: hci0: RTL: download fw command failed (-110) Revert the changes to fix this regression. Fixes: e5d6bd25f93d ("serial: 8250_dw: Do not reclock if already at correct rate") Cc: stable@vger.kernel.org Cc: Peter Collingbourne Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Peter Collingbourne Link: https://lore.kernel.org/r/20240317214123.34482-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_dw.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index a3acbf0f5da1..1300c92b8702 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -356,9 +356,9 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, long rate; int ret; + clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, newrate); - if (rate > 0 && p->uartclk != rate) { - clk_disable_unprepare(d->clk); + if (rate > 0) { /* * Note that any clock-notifer worker will block in * serial8250_update_uartclk() until we are done. @@ -366,8 +366,8 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, ret = clk_set_rate(d->clk, newrate); if (!ret) p->uartclk = rate; - clk_prepare_enable(d->clk); } + clk_prepare_enable(d->clk); dw8250_do_set_termios(p, termios, old); } -- cgit v1.3.1 From 54c4ec5f8c471b7c1137a1f769648549c423c026 Mon Sep 17 00:00:00 2001 From: Emil Kronborg Date: Wed, 20 Mar 2024 12:15:36 +0000 Subject: serial: mxs-auart: add spinlock around changing cts state The uart_handle_cts_change() function in serial_core expects the caller to hold uport->lock. For example, I have seen the below kernel splat, when the Bluetooth driver is loaded on an i.MX28 board. [ 85.119255] ------------[ cut here ]------------ [ 85.124413] WARNING: CPU: 0 PID: 27 at /drivers/tty/serial/serial_core.c:3453 uart_handle_cts_change+0xb4/0xec [ 85.134694] Modules linked in: hci_uart bluetooth ecdh_generic ecc wlcore_sdio configfs [ 85.143314] CPU: 0 PID: 27 Comm: kworker/u3:0 Not tainted 6.6.3-00021-gd62a2f068f92 #1 [ 85.151396] Hardware name: Freescale MXS (Device Tree) [ 85.156679] Workqueue: hci0 hci_power_on [bluetooth] (...) [ 85.191765] uart_handle_cts_change from mxs_auart_irq_handle+0x380/0x3f4 [ 85.198787] mxs_auart_irq_handle from __handle_irq_event_percpu+0x88/0x210 (...) Cc: stable@vger.kernel.org Fixes: 4d90bb147ef6 ("serial: core: Document and assert lock requirements for irq helpers") Reviewed-by: Frank Li Signed-off-by: Emil Kronborg Link: https://lore.kernel.org/r/20240320121530.11348-1-emil.kronborg@protonmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mxs-auart.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4749331fe618..1e8853eae504 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1086,11 +1086,13 @@ static void mxs_auart_set_ldisc(struct uart_port *port, static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istat; + u32 istat, stat; struct mxs_auart_port *s = context; u32 mctrl_temp = s->mctrl_prev; - u32 stat = mxs_read(s, REG_STAT); + uart_port_lock(&s->port); + + stat = mxs_read(s, REG_STAT); istat = mxs_read(s, REG_INTR); /* ack irq */ @@ -1126,6 +1128,8 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } + uart_port_unlock(&s->port); + return IRQ_HANDLED; } -- cgit v1.3.1 From 5555980571cc744cd99b6455e3e388b54519db8f Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 25 Mar 2024 09:16:47 +0200 Subject: serial: core: Fix regression when runtime PM is not enabled Commit 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") caused a regression for Sun Ultra 60 for the sunsab driver as reported by Nick Bowler . We need to add back the check runtime PM enabled state for serial port controller device, I wrongly assumed earlier we could just remove it. Fixes: 45a3a8ef8129 ("serial: core: Revert checks for tx runtime PM state") Cc: stable Reported-by: Nick Bowler Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20240325071649.27040-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index ff85ebd3a007..25a83820927a 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state) * enabled, serial_port_runtime_resume() calls start_tx() again * after enabling the device. */ - if (pm_runtime_active(&port_dev->dev)) + if (!pm_runtime_enabled(port->dev) || pm_runtime_active(&port_dev->dev)) port->ops->start_tx(port); pm_runtime_mark_last_busy(&port_dev->dev); pm_runtime_put_autosuspend(&port_dev->dev); -- cgit v1.3.1 From 90452456eb69297fe7ae34e56e40d8e47dc9e019 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 4 Apr 2024 01:41:52 +0300 Subject: serial: 8250_pci: Remove redundant PCI IDs Driver complains that PCI IDs are not needed for some of the LAVA cards: [ 0.297252] serial 0000:04:00.0: Redundant entry in serial pci_table. [ 0.297252] Please send the output of lspci -vv, this [ 0.297252] message (0x1407,0x0120,0x0000,0x0000), the [ 0.297252] manufacturer and name of serial board or [ 0.297252] modem board to . Do as suggested. Reported-by: Jimmy A Closes: https://lore.kernel.org/r/VI1P194MB052751BE157EFE9CEAB75725CE362@VI1P194MB0527.EURP194.PROD.OUTLOOK.COM Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240403224152.945099-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 6 ------ 1 file changed, 6 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 0d35c77fad9e..e2e4f99f9d34 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5010,12 +5010,6 @@ static const struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATRO_B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_A, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_QUATTRO_B, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, - pbn_b0_bt_2_115200 }, { PCI_VENDOR_ID_LAVA, PCI_DEVICE_ID_LAVA_OCTO_A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_bt_4_460800 }, -- cgit v1.3.1 From 1be3226445362bfbf461c92a5bcdb1723f2e4907 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 8 Apr 2024 19:23:43 +1000 Subject: serial/pmac_zilog: Remove flawed mitigation for rx irq flood The mitigation was intended to stop the irq completely. That may be better than a hard lock-up but it turns out that you get a crash anyway if you're using pmac_zilog as a serial console: ttyPZ0: pmz: rx irq flood ! BUG: spinlock recursion on CPU#0, swapper/0 That's because the pr_err() call in pmz_receive_chars() results in pmz_console_write() attempting to lock a spinlock already locked in pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal BUG splat. The spinlock in question is the one in struct uart_port. Even when it's not fatal, the serial port rx function ceases to work. Also, the iteration limit doesn't play nicely with QEMU, as can be seen in the bug report linked below. A web search for other reports of the error message "pmz: rx irq flood" didn't produce anything. So I don't think this code is needed any more. Remove it. Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: Nicholas Piggin Cc: Christophe Leroy Cc: Aneesh Kumar K.V Cc: Naveen N. Rao Cc: Andy Shevchenko Cc: stable@kernel.org Cc: linux-m68k@lists.linux-m68k.org Link: https://github.com/vivier/qemu-m68k/issues/44 Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/ Acked-by: Michael Ellerman Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Finn Thain Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pmac_zilog.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 05d97e89511e..92195f984de1 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -210,7 +210,6 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) { struct tty_port *port; unsigned char ch, r1, drop, flag; - int loops = 0; /* Sanity check, make sure the old bug is no longer happening */ if (uap->port.state == NULL) { @@ -291,24 +290,11 @@ static bool pmz_receive_chars(struct uart_pmac_port *uap) if (r1 & Rx_OVR) tty_insert_flip_char(port, 0, TTY_OVERRUN); next_char: - /* We can get stuck in an infinite loop getting char 0 when the - * line is in a wrong HW state, we break that here. - * When that happens, I disable the receive side of the driver. - * Note that what I've been experiencing is a real irq loop where - * I'm getting flooded regardless of the actual port speed. - * Something strange is going on with the HW - */ - if ((++loops) > 1000) - goto flood; ch = read_zsreg(uap, R0); if (!(ch & Rx_CH_AV)) break; } - return true; - flood: - pmz_interrupt_control(uap, 0); - pmz_error("pmz: rx irq flood !\n"); return true; } -- cgit v1.3.1 From 9cf7ea2eeb745213dc2a04103e426b960e807940 Mon Sep 17 00:00:00 2001 From: Andy Shevchenko Date: Thu, 4 Apr 2024 17:59:26 +0300 Subject: serial: core: Clearing the circular buffer before NULLifying it The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port. Fixes: 43066e32227e ("serial: port: Don't suspend if the port is still busy") Cc: stable Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 25a83820927a..2247efe97250 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -1788,6 +1788,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) * Free the transmit buffer. */ uart_port_lock_irq(uport); + uart_circ_clear(&state->xmit); buf = state->xmit.buf; state->xmit.buf = NULL; uart_port_unlock_irq(uport); -- cgit v1.3.1 From 3461e02066758b78a0731eb71faecfb1eccd0e6c Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Tue, 9 Apr 2024 13:36:46 +0200 Subject: usb: typec: mux: it5205: Fix ChipID value typo The ChipID bytes are read in inverse order: invert the ChipID value defined as IT5205FN_CHIP_ID and used for validating the same. Fixes: 41fe9ea1696c ("usb: typec: mux: Add ITE IT5205 Alternate Mode Passive MUX driver") Signed-off-by: AngeloGioacchino Del Regno Link: https://lore.kernel.org/r/20240409113646.305105-1-angelogioacchino.delregno@collabora.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/mux/it5205.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/typec/mux/it5205.c b/drivers/usb/typec/mux/it5205.c index 5535932e42cd..4357cc67a867 100644 --- a/drivers/usb/typec/mux/it5205.c +++ b/drivers/usb/typec/mux/it5205.c @@ -22,7 +22,7 @@ #include #define IT5205_REG_CHIP_ID(x) (0x4 + (x)) -#define IT5205FN_CHIP_ID 0x35323035 /* "5205" */ +#define IT5205FN_CHIP_ID 0x35303235 /* "5025" -> "5205" */ /* MUX power down register */ #define IT5205_REG_MUXPDR 0x10 -- cgit v1.3.1 From eed04fa96c48790c1cce73c8a248e9d460b088f8 Mon Sep 17 00:00:00 2001 From: Minas Harutyunyan Date: Tue, 9 Apr 2024 12:27:54 +0000 Subject: usb: dwc2: host: Fix dereference issue in DDMA completion flow. Fixed variable dereference issue in DDMA completion flow. Fixes: b258e4268850 ("usb: dwc2: host: Fix ISOC flow in DDMA mode") CC: stable@vger.kernel.org Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-usb/2024040834-ethically-rumble-701f@gregkh/T/#m4c4b83bef0ebb4b67fe2e0a7d6466cbb6f416e39 Signed-off-by: Minas Harutyunyan Link: https://lore.kernel.org/r/cc826d3ef53c934d8e6d98870f17f3cdc3d2755d.1712665387.git.Minas.Harutyunyan@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc2/hcd_ddma.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc2/hcd_ddma.c b/drivers/usb/dwc2/hcd_ddma.c index 79582b102c7e..994a78ad084b 100644 --- a/drivers/usb/dwc2/hcd_ddma.c +++ b/drivers/usb/dwc2/hcd_ddma.c @@ -867,13 +867,15 @@ static int dwc2_cmpl_host_isoc_dma_desc(struct dwc2_hsotg *hsotg, struct dwc2_dma_desc *dma_desc; struct dwc2_hcd_iso_packet_desc *frame_desc; u16 frame_desc_idx; - struct urb *usb_urb = qtd->urb->priv; + struct urb *usb_urb; u16 remain = 0; int rc = 0; if (!qtd->urb) return -EINVAL; + usb_urb = qtd->urb->priv; + dma_sync_single_for_cpu(hsotg->dev, qh->desc_list_dma + (idx * sizeof(struct dwc2_dma_desc)), sizeof(struct dwc2_dma_desc), -- cgit v1.3.1 From 4c08f01934ab67d1d283d5cbaa52b923abcfe4cd Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Sun, 7 Apr 2024 22:28:02 -0400 Subject: drm/vmwgfx: Enable DMA mappings with SEV Enable DMA mappings in vmwgfx after TTM has been fixed in commit 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem") This enables full guest-backed memory support and in particular allows usage of screen targets as the presentation mechanism. Signed-off-by: Zack Rusin Reported-by: Ye Li Tested-by: Ye Li Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active") Cc: Broadcom internal kernel review list Cc: dri-devel@lists.freedesktop.org Cc: # v6.6+ Reviewed-by: Martin Krastev Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index c7d90f96d16a..0a304706e013 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -666,11 +666,12 @@ static int vmw_dma_select_mode(struct vmw_private *dev_priv) [vmw_dma_map_populate] = "Caching DMA mappings.", [vmw_dma_map_bind] = "Giving up DMA mappings early."}; - /* TTM currently doesn't fully support SEV encryption. */ - if (cc_platform_has(CC_ATTR_MEM_ENCRYPT)) - return -EINVAL; - - if (vmw_force_coherent) + /* + * When running with SEV we always want dma mappings, because + * otherwise ttm tt pool pages will bounce through swiotlb running + * out of available space. + */ + if (vmw_force_coherent || cc_platform_has(CC_ATTR_MEM_ENCRYPT)) dev_priv->map_mode = vmw_dma_alloc_coherent; else if (vmw_restrict_iommu) dev_priv->map_mode = vmw_dma_map_bind; -- cgit v1.3.1 From 138b787804f4a10417618e8d1e6e2700539fd88c Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 8 Apr 2024 08:28:44 +0000 Subject: mISDN: fix MISDN_TIME_STAMP handling syzbot reports one unsafe call to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167 CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311 __sys_setsockopt+0x128/0x1a8 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Fixes: 1b2b03f8e514 ("Add mISDN core files") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: Karsten Keil Link: https://lore.kernel.org/r/20240408082845.3957374-3-edumazet@google.com Signed-off-by: Jakub Kicinski --- drivers/isdn/mISDN/socket.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c index 2776ca5fc33f..b215b28cad7b 100644 --- a/drivers/isdn/mISDN/socket.c +++ b/drivers/isdn/mISDN/socket.c @@ -401,23 +401,23 @@ data_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) } static int data_sock_setsockopt(struct socket *sock, int level, int optname, - sockptr_t optval, unsigned int len) + sockptr_t optval, unsigned int optlen) { struct sock *sk = sock->sk; int err = 0, opt = 0; if (*debug & DEBUG_SOCKET) printk(KERN_DEBUG "%s(%p, %d, %x, optval, %d)\n", __func__, sock, - level, optname, len); + level, optname, optlen); lock_sock(sk); switch (optname) { case MISDN_TIME_STAMP: - if (copy_from_sockptr(&opt, optval, sizeof(int))) { - err = -EFAULT; + err = copy_safe_from_sockptr(&opt, sizeof(opt), + optval, optlen); + if (err) break; - } if (opt) _pms(sk)->cmask |= MISDN_TIME_STAMP; -- cgit v1.3.1 From 8bdfb4ea95ca738d33ef71376c21eba20130f2eb Mon Sep 17 00:00:00 2001 From: Harish Kasiviswanathan Date: Tue, 26 Mar 2024 15:32:46 -0400 Subject: drm/amdkfd: Reset GPU on queue preemption failure Currently, with F32 HWS GPU reset is only when unmap queue fails. However, if compute queue doesn't repond to preemption request in time unmap will return without any error. In this case, only preemption error is logged and Reset is not triggered. Call GPU reset in this case also. Reviewed-by: Alex Deucher Signed-off-by: Harish Kasiviswanathan Reviewed-by: Mukul Joshi Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c index f4d395e38683..0b655555e167 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c @@ -2001,6 +2001,7 @@ static int unmap_queues_cpsch(struct device_queue_manager *dqm, dev_err(dev, "HIQ MQD's queue_doorbell_id0 is not 0, Queue preemption time out\n"); while (halt_if_hws_hang) schedule(); + kfd_hws_hang(dqm); return -ETIME; } -- cgit v1.3.1 From 65ff8092e4802f96d87d3d7cde146961f5228265 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sat, 23 Mar 2024 20:46:53 -0400 Subject: drm/amdgpu: always force full reset for SOC21 There are cases where soft reset seems to succeed, but does not, so always use mode1/2 for now. Reviewed-by: Harish Kasiviswanathan Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/soc21.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c index 581a3bd11481..8526282f4da1 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc21.c +++ b/drivers/gpu/drm/amd/amdgpu/soc21.c @@ -457,10 +457,8 @@ static bool soc21_need_full_reset(struct amdgpu_device *adev) { switch (amdgpu_ip_version(adev, GC_HWIP, 0)) { case IP_VERSION(11, 0, 0): - return amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__UMC); case IP_VERSION(11, 0, 2): case IP_VERSION(11, 0, 3): - return false; default: return true; } -- cgit v1.3.1 From 4b18a91faf1752f9bd69a4ed3aed2c8f6e5b0528 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Thu, 21 Mar 2024 17:46:36 +0530 Subject: drm/amdgpu: Refine IB schedule error logging MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Downgrade to debug information when IBs are skipped. Also, use dev_* to identify the device. Signed-off-by: Lijo Lazar Reviewed-by: Christian König Reviewed-by: Asad Kamal Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_job.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c index 4b3000c21ef2..e4742b65032d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_job.c @@ -304,12 +304,15 @@ static struct dma_fence *amdgpu_job_run(struct drm_sched_job *sched_job) dma_fence_set_error(finished, -ECANCELED); if (finished->error < 0) { - DRM_INFO("Skip scheduling IBs!\n"); + dev_dbg(adev->dev, "Skip scheduling IBs in ring(%s)", + ring->name); } else { r = amdgpu_ib_schedule(ring, job->num_ibs, job->ibs, job, &fence); if (r) - DRM_ERROR("Error scheduling IBs (%d)\n", r); + dev_err(adev->dev, + "Error scheduling IBs (%d) in ring(%s)", r, + ring->name); } job->job_run_counter++; -- cgit v1.3.1 From 0f1bbcc2bab25d5fb2dfb1ee3e08131437690d3d Mon Sep 17 00:00:00 2001 From: Lang Yu Date: Mon, 25 Mar 2024 13:24:31 +0800 Subject: drm/amdgpu/umsch: reinitialize write pointer in hw init Otherwise the old one will be used during GPU reset. That's not expected. Signed-off-by: Lang Yu Reviewed-by: Feifei Xu Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c b/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c index 84368cf1e175..bd57896ab85d 100644 --- a/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/umsch_mm_v4_0.c @@ -225,6 +225,8 @@ static int umsch_mm_v4_0_ring_start(struct amdgpu_umsch_mm *umsch) WREG32_SOC15(VCN, 0, regVCN_UMSCH_RB_SIZE, ring->ring_size); + ring->wptr = 0; + data = RREG32_SOC15(VCN, 0, regVCN_RB_ENABLE); data &= ~(VCN_RB_ENABLE__AUDIO_RB_EN_MASK); WREG32_SOC15(VCN, 0, regVCN_RB_ENABLE, data); -- cgit v1.3.1 From 8b2be55f4d6c1099d7f629b0ed7535a5be788c83 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Wed, 14 Feb 2024 17:55:54 +0530 Subject: drm/amdgpu: Reset dGPU if suspend got aborted For SOC21 ASICs, there is an issue in re-enabling PM features if a suspend got aborted. In such cases, reset the device during resume phase. This is a workaround till a proper solution is finalized. Signed-off-by: Lijo Lazar Reviewed-by: Alex Deucher Reviewed-by: Yang Wang Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/soc21.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c index 8526282f4da1..abe319b0f063 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc21.c +++ b/drivers/gpu/drm/amd/amdgpu/soc21.c @@ -867,10 +867,35 @@ static int soc21_common_suspend(void *handle) return soc21_common_hw_fini(adev); } +static bool soc21_need_reset_on_resume(struct amdgpu_device *adev) +{ + u32 sol_reg1, sol_reg2; + + /* Will reset for the following suspend abort cases. + * 1) Only reset dGPU side. + * 2) S3 suspend got aborted and TOS is active. + */ + if (!(adev->flags & AMD_IS_APU) && adev->in_s3 && + !adev->suspend_complete) { + sol_reg1 = RREG32_SOC15(MP0, 0, regMP0_SMN_C2PMSG_81); + msleep(100); + sol_reg2 = RREG32_SOC15(MP0, 0, regMP0_SMN_C2PMSG_81); + + return (sol_reg1 != sol_reg2); + } + + return false; +} + static int soc21_common_resume(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; + if (soc21_need_reset_on_resume(adev)) { + dev_info(adev->dev, "S3 suspend aborted, resetting..."); + soc21_asic_reset(adev); + } + return soc21_common_hw_init(adev); } -- cgit v1.3.1 From d4396924c3d44f34d0643f650e70892e07f3677f Mon Sep 17 00:00:00 2001 From: Li Ma Date: Thu, 28 Mar 2024 10:55:10 +0800 Subject: drm/amd/display: add DCN 351 version for microcode load There is a new DCN veriosn 3.5.1 need to load Signed-off-by: Li Ma Reviewed-by: Yifan Zhang Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 71d2d44681b2..173438fc7537 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -148,6 +148,9 @@ MODULE_FIRMWARE(FIRMWARE_NAVI12_DMCU); #define FIRMWARE_DCN_35_DMUB "amdgpu/dcn_3_5_dmcub.bin" MODULE_FIRMWARE(FIRMWARE_DCN_35_DMUB); +#define FIRMWARE_DCN_351_DMUB "amdgpu/dcn_3_5_1_dmcub.bin" +MODULE_FIRMWARE(FIRMWARE_DCN_351_DMUB); + /* Number of bytes in PSP header for firmware. */ #define PSP_HEADER_BYTES 0x100 @@ -4820,9 +4823,11 @@ static int dm_init_microcode(struct amdgpu_device *adev) fw_name_dmub = FIRMWARE_DCN_V3_2_1_DMCUB; break; case IP_VERSION(3, 5, 0): - case IP_VERSION(3, 5, 1): fw_name_dmub = FIRMWARE_DCN_35_DMUB; break; + case IP_VERSION(3, 5, 1): + fw_name_dmub = FIRMWARE_DCN_351_DMUB; + break; default: /* ASIC doesn't support DMUB. */ return 0; -- cgit v1.3.1 From 31729e8c21ecfd671458e02b6511eb68c2225113 Mon Sep 17 00:00:00 2001 From: Tim Huang Date: Wed, 27 Mar 2024 13:10:37 +0800 Subject: drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11 While doing multiple S4 stress tests, GC/RLC/PMFW get into an invalid state resulting into hard hangs. Adding a GFX reset as workaround just before sending the MP1_UNLOAD message avoids this failure. Signed-off-by: Tim Huang Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c index bb98156b2fa1..949131bd1ecb 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_4_ppt.c @@ -226,8 +226,18 @@ static int smu_v13_0_4_system_features_control(struct smu_context *smu, bool en) struct amdgpu_device *adev = smu->adev; int ret = 0; - if (!en && !adev->in_s0ix) + if (!en && !adev->in_s0ix) { + /* Adds a GFX reset as workaround just before sending the + * MP1_UNLOAD message to prevent GC/RLC/PMFW from entering + * an invalid state. + */ + ret = smu_cmn_send_smc_msg_with_param(smu, SMU_MSG_GfxDeviceDriverReset, + SMU_RESET_MODE_2, NULL); + if (ret) + return ret; + ret = smu_cmn_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL); + } return ret; } -- cgit v1.3.1 From a3a4c0b12346a2493b41c8790d85141844a04e28 Mon Sep 17 00:00:00 2001 From: shaoyunl Date: Fri, 22 Mar 2024 12:25:16 -0400 Subject: drm/amdgpu : Add mes_log_enable to control mes log feature The MES log might slow down the performance for extra step of log the data, disable it by default and introduce a parameter can enable it when necessary Signed-off-by: shaoyunl Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu.h | 1 + drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 10 ++++++++++ drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 5 ++++- drivers/gpu/drm/amd/amdgpu/mes_v11_0.c | 7 +++++-- 4 files changed, 20 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h b/drivers/gpu/drm/amd/amdgpu/amdgpu.h index 9c62552bec34..b3b84647207e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h @@ -210,6 +210,7 @@ extern int amdgpu_async_gfx_ring; extern int amdgpu_mcbp; extern int amdgpu_discovery; extern int amdgpu_mes; +extern int amdgpu_mes_log_enable; extern int amdgpu_mes_kiq; extern int amdgpu_noretry; extern int amdgpu_force_asic_type; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 80b9642f2bc4..e4277298cf1a 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -195,6 +195,7 @@ int amdgpu_async_gfx_ring = 1; int amdgpu_mcbp = -1; int amdgpu_discovery = -1; int amdgpu_mes; +int amdgpu_mes_log_enable = 0; int amdgpu_mes_kiq; int amdgpu_noretry = -1; int amdgpu_force_asic_type = -1; @@ -667,6 +668,15 @@ MODULE_PARM_DESC(mes, "Enable Micro Engine Scheduler (0 = disabled (default), 1 = enabled)"); module_param_named(mes, amdgpu_mes, int, 0444); +/** + * DOC: mes_log_enable (int) + * Enable Micro Engine Scheduler log. This is used to enable/disable MES internal log. + * (0 = disabled (default), 1 = enabled) + */ +MODULE_PARM_DESC(mes_log_enable, + "Enable Micro Engine Scheduler log (0 = disabled (default), 1 = enabled)"); +module_param_named(mes_log_enable, amdgpu_mes_log_enable, int, 0444); + /** * DOC: mes_kiq (int) * Enable Micro Engine Scheduler KIQ. This is a new engine pipe for kiq. diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c index a98e03e0a51f..cfd613ea39b3 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c @@ -102,6 +102,9 @@ static int amdgpu_mes_event_log_init(struct amdgpu_device *adev) { int r; + if (!amdgpu_mes_log_enable) + return 0; + r = amdgpu_bo_create_kernel(adev, PAGE_SIZE, PAGE_SIZE, AMDGPU_GEM_DOMAIN_GTT, &adev->mes.event_log_gpu_obj, @@ -1565,7 +1568,7 @@ void amdgpu_debugfs_mes_event_log_init(struct amdgpu_device *adev) #if defined(CONFIG_DEBUG_FS) struct drm_minor *minor = adev_to_drm(adev)->primary; struct dentry *root = minor->debugfs_root; - if (adev->enable_mes) + if (adev->enable_mes && amdgpu_mes_log_enable) debugfs_create_file("amdgpu_mes_event_log", 0444, root, adev, &amdgpu_debugfs_mes_event_log_fops); diff --git a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c index 072c478665ad..63f281a9984d 100644 --- a/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/mes_v11_0.c @@ -411,8 +411,11 @@ static int mes_v11_0_set_hw_resources(struct amdgpu_mes *mes) mes_set_hw_res_pkt.enable_reg_active_poll = 1; mes_set_hw_res_pkt.enable_level_process_quantum_check = 1; mes_set_hw_res_pkt.oversubscription_timer = 50; - mes_set_hw_res_pkt.enable_mes_event_int_logging = 1; - mes_set_hw_res_pkt.event_intr_history_gpu_mc_ptr = mes->event_log_gpu_addr; + if (amdgpu_mes_log_enable) { + mes_set_hw_res_pkt.enable_mes_event_int_logging = 1; + mes_set_hw_res_pkt.event_intr_history_gpu_mc_ptr = + mes->event_log_gpu_addr; + } return mes_v11_0_submit_pkt_and_poll_completion(mes, &mes_set_hw_res_pkt, sizeof(mes_set_hw_res_pkt), -- cgit v1.3.1 From 5b0cd091d905ee9da0a3ecdf06b9cbdd17ba711d Mon Sep 17 00:00:00 2001 From: shaoyunl Date: Fri, 22 Mar 2024 12:44:55 -0400 Subject: drm/amdgpu : Increase the mes log buffer size as per new MES FW version From MES version 0x54, the log entry increased and require the log buffer size to be increased. The 16k is maximum size agreed Signed-off-by: shaoyunl Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c | 5 ++--- drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h | 1 + 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c index cfd613ea39b3..a00cf4756ad0 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.c @@ -105,7 +105,7 @@ static int amdgpu_mes_event_log_init(struct amdgpu_device *adev) if (!amdgpu_mes_log_enable) return 0; - r = amdgpu_bo_create_kernel(adev, PAGE_SIZE, PAGE_SIZE, + r = amdgpu_bo_create_kernel(adev, AMDGPU_MES_LOG_BUFFER_SIZE, PAGE_SIZE, AMDGPU_GEM_DOMAIN_GTT, &adev->mes.event_log_gpu_obj, &adev->mes.event_log_gpu_addr, @@ -1552,12 +1552,11 @@ static int amdgpu_debugfs_mes_event_log_show(struct seq_file *m, void *unused) uint32_t *mem = (uint32_t *)(adev->mes.event_log_cpu_addr); seq_hex_dump(m, "", DUMP_PREFIX_OFFSET, 32, 4, - mem, PAGE_SIZE, false); + mem, AMDGPU_MES_LOG_BUFFER_SIZE, false); return 0; } - DEFINE_SHOW_ATTRIBUTE(amdgpu_debugfs_mes_event_log); #endif diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h index 7d4f93fea937..4c8fc3117ef8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_mes.h @@ -52,6 +52,7 @@ enum amdgpu_mes_priority_level { #define AMDGPU_MES_PROC_CTX_SIZE 0x1000 /* one page area */ #define AMDGPU_MES_GANG_CTX_SIZE 0x1000 /* one page area */ +#define AMDGPU_MES_LOG_BUFFER_SIZE 0x4000 /* Maximu log buffer size for MES */ struct amdgpu_mes_funcs; -- cgit v1.3.1 From c5b1ccff26950d50bf2043cb2af9bafb1f08bbaf Mon Sep 17 00:00:00 2001 From: lima1002 Date: Mon, 29 Jan 2024 20:17:54 +0800 Subject: drm/amd/swsmu: Update smu v14.0.0 headers to be 14.0.1 compatible update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1 Reviewed-by: Alex Deucher Signed-off-by: lima1002 Signed-off-by: Alex Deucher --- .../pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h | 33 +- .../amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h | 55 +++- .../amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h | 18 +- drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h | 1 + drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c | 2 +- .../gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c | 347 +++++++++++++++++++-- 6 files changed, 413 insertions(+), 43 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h index 5bb7a63c0602..97522c085258 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu14_driver_if_v14_0_0.h @@ -144,6 +144,37 @@ typedef struct { uint32_t MaxGfxClk; } DpmClocks_t; +//Freq in MHz +//Voltage in milli volts with 2 fractional bits +typedef struct { + uint32_t DcfClocks[NUM_DCFCLK_DPM_LEVELS]; + uint32_t DispClocks[NUM_DISPCLK_DPM_LEVELS]; + uint32_t DppClocks[NUM_DPPCLK_DPM_LEVELS]; + uint32_t SocClocks[NUM_SOCCLK_DPM_LEVELS]; + uint32_t VClocks0[NUM_VCN_DPM_LEVELS]; + uint32_t VClocks1[NUM_VCN_DPM_LEVELS]; + uint32_t DClocks0[NUM_VCN_DPM_LEVELS]; + uint32_t DClocks1[NUM_VCN_DPM_LEVELS]; + uint32_t VPEClocks[NUM_VPE_DPM_LEVELS]; + uint32_t FclkClocks_Freq[NUM_FCLK_DPM_LEVELS]; + uint32_t FclkClocks_Voltage[NUM_FCLK_DPM_LEVELS]; + uint32_t SocVoltage[NUM_SOC_VOLTAGE_LEVELS]; + MemPstateTable_t MemPstateTable[NUM_MEM_PSTATE_LEVELS]; + + uint8_t NumDcfClkLevelsEnabled; + uint8_t NumDispClkLevelsEnabled; //Applies to both Dispclk and Dppclk + uint8_t NumSocClkLevelsEnabled; + uint8_t Vcn0ClkLevelsEnabled; //Applies to both Vclk0 and Dclk0 + uint8_t Vcn1ClkLevelsEnabled; //Applies to both Vclk1 and Dclk1 + uint8_t VpeClkLevelsEnabled; + uint8_t NumMemPstatesEnabled; + uint8_t NumFclkLevelsEnabled; + uint8_t spare; + + uint32_t MinGfxClk; + uint32_t MaxGfxClk; +} DpmClocks_t_v14_0_1; + typedef struct { uint16_t CoreFrequency[16]; //Target core frequency [MHz] uint16_t CorePower[16]; //CAC calculated core power [mW] @@ -224,7 +255,7 @@ typedef enum { #define TABLE_CUSTOM_DPM 2 // Called by Driver #define TABLE_BIOS_GPIO_CONFIG 3 // Called by BIOS #define TABLE_DPMCLOCKS 4 // Called by Driver and VBIOS -#define TABLE_SPARE0 5 // Unused +#define TABLE_MOMENTARY_PM 5 // Called by Tools #define TABLE_MODERN_STDBY 6 // Called by Tools for Modern Standby Log #define TABLE_SMU_METRICS 7 // Called by Driver and SMF/PMF #define TABLE_COUNT 8 diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h index 356e0f57a426..ddb625860083 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_pmfw.h @@ -42,7 +42,7 @@ #define FEATURE_EDC_BIT 7 #define FEATURE_PLL_POWER_DOWN_BIT 8 #define FEATURE_VDDOFF_BIT 9 -#define FEATURE_VCN_DPM_BIT 10 +#define FEATURE_VCN_DPM_BIT 10 /* this is for both VCN0 and VCN1 */ #define FEATURE_DS_MPM_BIT 11 #define FEATURE_FCLK_DPM_BIT 12 #define FEATURE_SOCCLK_DPM_BIT 13 @@ -56,9 +56,9 @@ #define FEATURE_DS_GFXCLK_BIT 21 #define FEATURE_DS_SOCCLK_BIT 22 #define FEATURE_DS_LCLK_BIT 23 -#define FEATURE_LOW_POWER_DCNCLKS_BIT 24 // for all DISP clks +#define FEATURE_LOW_POWER_DCNCLKS_BIT 24 #define FEATURE_DS_SHUBCLK_BIT 25 -#define FEATURE_SPARE0_BIT 26 //SPARE +#define FEATURE_RESERVED0_BIT 26 #define FEATURE_ZSTATES_BIT 27 #define FEATURE_IOMMUL2_PG_BIT 28 #define FEATURE_DS_FCLK_BIT 29 @@ -66,8 +66,8 @@ #define FEATURE_DS_MP1CLK_BIT 31 #define FEATURE_WHISPER_MODE_BIT 32 #define FEATURE_SMU_LOW_POWER_BIT 33 -#define FEATURE_SMART_L3_RINSER_BIT 34 -#define FEATURE_SPARE1_BIT 35 //SPARE +#define FEATURE_RESERVED1_BIT 34 /* v14_0_0 SMART_L3_RINSER; v14_0_1 RESERVED1 */ +#define FEATURE_GFX_DEM_BIT 35 /* v14_0_0 SPARE; v14_0_1 GFX_DEM */ #define FEATURE_PSI_BIT 36 #define FEATURE_PROCHOT_BIT 37 #define FEATURE_CPUOFF_BIT 38 @@ -77,11 +77,11 @@ #define FEATURE_PERF_LIMIT_BIT 42 #define FEATURE_CORE_DLDO_BIT 43 #define FEATURE_DVO_BIT 44 -#define FEATURE_DS_VCN_BIT 45 +#define FEATURE_DS_VCN_BIT 45 /* v14_0_1 this is for both VCN0 and VCN1 */ #define FEATURE_CPPC_BIT 46 #define FEATURE_CPPC_PREFERRED_CORES 47 #define FEATURE_DF_CSTATES_BIT 48 -#define FEATURE_SPARE2_BIT 49 //SPARE +#define FEATURE_FAST_PSTATE_CLDO_BIT 49 /* v14_0_0 SPARE */ #define FEATURE_ATHUB_PG_BIT 50 #define FEATURE_VDDOFF_ECO_BIT 51 #define FEATURE_ZSTATES_ECO_BIT 52 @@ -93,8 +93,8 @@ #define FEATURE_DS_IPUCLK_BIT 58 #define FEATURE_DS_VPECLK_BIT 59 #define FEATURE_VPE_DPM_BIT 60 -#define FEATURE_SPARE_61 61 -#define FEATURE_FP_DIDT 62 +#define FEATURE_SMART_L3_RINSER_BIT 61 /* v14_0_0 SPARE*/ +#define FEATURE_PCC_BIT 62 /* v14_0_0 FP_DIDT v14_0_1 PCC_BIT */ #define NUM_FEATURES 63 // Firmware Header/Footer @@ -151,6 +151,43 @@ typedef struct { // MP1_EXT_SCRATCH7 = RTOS Current Job } FwStatus_t; +typedef struct { + // MP1_EXT_SCRATCH0 + uint32_t DpmHandlerID : 8; + uint32_t ActivityMonitorID : 8; + uint32_t DpmTimerID : 8; + uint32_t DpmHubID : 4; + uint32_t DpmHubTask : 4; + // MP1_EXT_SCRATCH1 + uint32_t CclkSyncStatus : 8; + uint32_t ZstateStatus : 4; + uint32_t Cpu1VddOff : 4; + uint32_t DstateFun : 4; + uint32_t DstateDev : 4; + uint32_t GfxOffStatus : 2; + uint32_t Cpu0Off : 2; + uint32_t Cpu1Off : 2; + uint32_t Cpu0VddOff : 2; + // MP1_EXT_SCRATCH2 + uint32_t P2JobHandler :32; + // MP1_EXT_SCRATCH3 + uint32_t PostCode :32; + // MP1_EXT_SCRATCH4 + uint32_t MsgPortBusy :15; + uint32_t RsmuPmiP1Pending : 1; + uint32_t RsmuPmiP2PendingCnt : 8; + uint32_t DfCstateExitPending : 1; + uint32_t Pc6EntryPending : 1; + uint32_t Pc6ExitPending : 1; + uint32_t WarmResetPending : 1; + uint32_t Mp0ClkPending : 1; + uint32_t InWhisperMode : 1; + uint32_t spare2 : 2; + // MP1_EXT_SCRATCH5 + uint32_t IdleMask :32; + // MP1_EXT_SCRATCH6 = RTOS threads' status + // MP1_EXT_SCRATCH7 = RTOS Current Job +} FwStatus_t_v14_0_1; #pragma pack(pop) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h index ca7ce4251482..c4dc5881d8df 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/pmfw_if/smu_v14_0_0_ppsmc.h @@ -72,23 +72,19 @@ #define PPSMC_MSG_SetHardMinSocclkByFreq 0x13 ///< Set hard min for SOC CLK #define PPSMC_MSG_SetSoftMinFclk 0x14 ///< Set hard min for FCLK #define PPSMC_MSG_SetSoftMinVcn0 0x15 ///< Set soft min for VCN0 clocks (VCLK0 and DCLK0) - #define PPSMC_MSG_EnableGfxImu 0x16 ///< Enable GFX IMU - -#define PPSMC_MSG_spare_0x17 0x17 -#define PPSMC_MSG_spare_0x18 0x18 +#define PPSMC_MSG_spare_0x17 0x17 ///< Get GFX clock frequency +#define PPSMC_MSG_spare_0x18 0x18 ///< Get FCLK frequency #define PPSMC_MSG_AllowGfxOff 0x19 ///< Inform PMFW of allowing GFXOFF entry #define PPSMC_MSG_DisallowGfxOff 0x1A ///< Inform PMFW of disallowing GFXOFF entry #define PPSMC_MSG_SetSoftMaxGfxClk 0x1B ///< Set soft max for GFX CLK #define PPSMC_MSG_SetHardMinGfxClk 0x1C ///< Set hard min for GFX CLK - #define PPSMC_MSG_SetSoftMaxSocclkByFreq 0x1D ///< Set soft max for SOC CLK #define PPSMC_MSG_SetSoftMaxFclkByFreq 0x1E ///< Set soft max for FCLK #define PPSMC_MSG_SetSoftMaxVcn0 0x1F ///< Set soft max for VCN0 clocks (VCLK0 and DCLK0) -#define PPSMC_MSG_spare_0x20 0x20 +#define PPSMC_MSG_spare_0x20 0x20 ///< Set power limit percentage #define PPSMC_MSG_PowerDownJpeg0 0x21 ///< Power down Jpeg of VCN0 #define PPSMC_MSG_PowerUpJpeg0 0x22 ///< Power up Jpeg of VCN0; VCN0 is power gated by default - #define PPSMC_MSG_SetHardMinFclkByFreq 0x23 ///< Set hard min for FCLK #define PPSMC_MSG_SetSoftMinSocclkByFreq 0x24 ///< Set soft min for SOC CLK #define PPSMC_MSG_AllowZstates 0x25 ///< Inform PMFM of allowing Zstate entry, i.e. no Miracast activity @@ -99,8 +95,8 @@ #define PPSMC_MSG_PowerUpIspByTile 0x2A ///< This message is used to power up ISP tiles and enable the ISP DPM #define PPSMC_MSG_SetHardMinIspiclkByFreq 0x2B ///< Set HardMin by frequency for ISPICLK #define PPSMC_MSG_SetHardMinIspxclkByFreq 0x2C ///< Set HardMin by frequency for ISPXCLK -#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN.UMSCH (aka VSCH) scheduler -#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN.UMSCH (aka VSCH) scheduler +#define PPSMC_MSG_PowerDownUmsch 0x2D ///< Power down VCN0.UMSCH (aka VSCH) scheduler +#define PPSMC_MSG_PowerUpUmsch 0x2E ///< Power up VCN0.UMSCH (aka VSCH) scheduler #define PPSMC_Message_IspStutterOn_MmhubPgDis 0x2F ///< ISP StutterOn mmHub PgDis #define PPSMC_Message_IspStutterOff_MmhubPgEn 0x30 ///< ISP StufferOff mmHub PgEn #define PPSMC_MSG_PowerUpVpe 0x31 ///< Power up VPE @@ -110,7 +106,9 @@ #define PPSMC_MSG_DisableLSdma 0x35 ///< Disable LSDMA #define PPSMC_MSG_SetSoftMaxVpe 0x36 ///< #define PPSMC_MSG_SetSoftMinVpe 0x37 ///< -#define PPSMC_Message_Count 0x38 ///< Total number of PPSMC messages +#define PPSMC_MSG_AllocMALLCache 0x38 ///< Allocating MALL Cache +#define PPSMC_MSG_ReleaseMALLCache 0x39 ///< Releasing MALL Cache +#define PPSMC_Message_Count 0x3A ///< Total number of PPSMC messages /** @}*/ /** diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h index 3f7463c1c1a9..4af1985ae446 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/smu_v14_0.h @@ -27,6 +27,7 @@ #define SMU14_DRIVER_IF_VERSION_INV 0xFFFFFFFF #define SMU14_DRIVER_IF_VERSION_SMU_V14_0_0 0x7 +#define SMU14_DRIVER_IF_VERSION_SMU_V14_0_1 0x6 #define SMU14_DRIVER_IF_VERSION_SMU_V14_0_2 0x1 #define FEATURE_MASK(feature) (1ULL << feature) diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c index 9e39f99154f9..07a65e005785 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0.c @@ -234,7 +234,7 @@ int smu_v14_0_check_fw_version(struct smu_context *smu) smu->smc_driver_if_version = SMU14_DRIVER_IF_VERSION_SMU_V14_0_0; break; case IP_VERSION(14, 0, 1): - smu->smc_driver_if_version = SMU14_DRIVER_IF_VERSION_SMU_V14_0_0; + smu->smc_driver_if_version = SMU14_DRIVER_IF_VERSION_SMU_V14_0_1; break; default: diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c index d6de6d97286c..63399c00cc28 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu14/smu_v14_0_0_ppt.c @@ -161,7 +161,7 @@ static int smu_v14_0_0_init_smc_tables(struct smu_context *smu) SMU_TABLE_INIT(tables, SMU_TABLE_WATERMARKS, sizeof(Watermarks_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); - SMU_TABLE_INIT(tables, SMU_TABLE_DPMCLOCKS, sizeof(DpmClocks_t), + SMU_TABLE_INIT(tables, SMU_TABLE_DPMCLOCKS, max(sizeof(DpmClocks_t), sizeof(DpmClocks_t_v14_0_1)), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); SMU_TABLE_INIT(tables, SMU_TABLE_SMU_METRICS, sizeof(SmuMetrics_t), PAGE_SIZE, AMDGPU_GEM_DOMAIN_VRAM); @@ -171,7 +171,7 @@ static int smu_v14_0_0_init_smc_tables(struct smu_context *smu) goto err0_out; smu_table->metrics_time = 0; - smu_table->clocks_table = kzalloc(sizeof(DpmClocks_t), GFP_KERNEL); + smu_table->clocks_table = kzalloc(max(sizeof(DpmClocks_t), sizeof(DpmClocks_t_v14_0_1)), GFP_KERNEL); if (!smu_table->clocks_table) goto err1_out; @@ -593,6 +593,60 @@ static int smu_v14_0_0_mode2_reset(struct smu_context *smu) return ret; } +static int smu_v14_0_1_get_dpm_freq_by_index(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t dpm_level, + uint32_t *freq) +{ + DpmClocks_t_v14_0_1 *clk_table = smu->smu_table.clocks_table; + + if (!clk_table || clk_type >= SMU_CLK_COUNT) + return -EINVAL; + + switch (clk_type) { + case SMU_SOCCLK: + if (dpm_level >= clk_table->NumSocClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->SocClocks[dpm_level]; + break; + case SMU_VCLK: + if (dpm_level >= clk_table->Vcn0ClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->VClocks0[dpm_level]; + break; + case SMU_DCLK: + if (dpm_level >= clk_table->Vcn0ClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->DClocks0[dpm_level]; + break; + case SMU_VCLK1: + if (dpm_level >= clk_table->Vcn1ClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->VClocks1[dpm_level]; + break; + case SMU_DCLK1: + if (dpm_level >= clk_table->Vcn1ClkLevelsEnabled) + return -EINVAL; + *freq = clk_table->DClocks1[dpm_level]; + break; + case SMU_UCLK: + case SMU_MCLK: + if (dpm_level >= clk_table->NumMemPstatesEnabled) + return -EINVAL; + *freq = clk_table->MemPstateTable[dpm_level].MemClk; + break; + case SMU_FCLK: + if (dpm_level >= clk_table->NumFclkLevelsEnabled) + return -EINVAL; + *freq = clk_table->FclkClocks_Freq[dpm_level]; + break; + default: + return -EINVAL; + } + + return 0; +} + static int smu_v14_0_0_get_dpm_freq_by_index(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t dpm_level, @@ -637,6 +691,19 @@ static int smu_v14_0_0_get_dpm_freq_by_index(struct smu_context *smu, return 0; } +static int smu_v14_0_common_get_dpm_freq_by_index(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t dpm_level, + uint32_t *freq) +{ + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 0)) + smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, dpm_level, freq); + else if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 1)) + smu_v14_0_1_get_dpm_freq_by_index(smu, clk_type, dpm_level, freq); + + return 0; +} + static bool smu_v14_0_0_clk_dpm_is_enabled(struct smu_context *smu, enum smu_clk_type clk_type) { @@ -657,6 +724,8 @@ static bool smu_v14_0_0_clk_dpm_is_enabled(struct smu_context *smu, break; case SMU_VCLK: case SMU_DCLK: + case SMU_VCLK1: + case SMU_DCLK1: feature_id = SMU_FEATURE_VCN_DPM_BIT; break; default: @@ -666,6 +735,126 @@ static bool smu_v14_0_0_clk_dpm_is_enabled(struct smu_context *smu, return smu_cmn_feature_is_enabled(smu, feature_id); } +static int smu_v14_0_1_get_dpm_ultimate_freq(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *min, + uint32_t *max) +{ + DpmClocks_t_v14_0_1 *clk_table = smu->smu_table.clocks_table; + uint32_t clock_limit; + uint32_t max_dpm_level, min_dpm_level; + int ret = 0; + + if (!smu_v14_0_0_clk_dpm_is_enabled(smu, clk_type)) { + switch (clk_type) { + case SMU_MCLK: + case SMU_UCLK: + clock_limit = smu->smu_table.boot_values.uclk; + break; + case SMU_FCLK: + clock_limit = smu->smu_table.boot_values.fclk; + break; + case SMU_GFXCLK: + case SMU_SCLK: + clock_limit = smu->smu_table.boot_values.gfxclk; + break; + case SMU_SOCCLK: + clock_limit = smu->smu_table.boot_values.socclk; + break; + case SMU_VCLK: + case SMU_VCLK1: + clock_limit = smu->smu_table.boot_values.vclk; + break; + case SMU_DCLK: + case SMU_DCLK1: + clock_limit = smu->smu_table.boot_values.dclk; + break; + default: + clock_limit = 0; + break; + } + + /* clock in Mhz unit */ + if (min) + *min = clock_limit / 100; + if (max) + *max = clock_limit / 100; + + return 0; + } + + if (max) { + switch (clk_type) { + case SMU_GFXCLK: + case SMU_SCLK: + *max = clk_table->MaxGfxClk; + break; + case SMU_MCLK: + case SMU_UCLK: + case SMU_FCLK: + max_dpm_level = 0; + break; + case SMU_SOCCLK: + max_dpm_level = clk_table->NumSocClkLevelsEnabled - 1; + break; + case SMU_VCLK: + case SMU_DCLK: + max_dpm_level = clk_table->Vcn0ClkLevelsEnabled - 1; + break; + case SMU_VCLK1: + case SMU_DCLK1: + max_dpm_level = clk_table->Vcn1ClkLevelsEnabled - 1; + break; + default: + ret = -EINVAL; + goto failed; + } + + if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, max_dpm_level, max); + if (ret) + goto failed; + } + } + + if (min) { + switch (clk_type) { + case SMU_GFXCLK: + case SMU_SCLK: + *min = clk_table->MinGfxClk; + break; + case SMU_MCLK: + case SMU_UCLK: + min_dpm_level = clk_table->NumMemPstatesEnabled - 1; + break; + case SMU_FCLK: + min_dpm_level = clk_table->NumFclkLevelsEnabled - 1; + break; + case SMU_SOCCLK: + min_dpm_level = 0; + break; + case SMU_VCLK: + case SMU_DCLK: + case SMU_VCLK1: + case SMU_DCLK1: + min_dpm_level = 0; + break; + default: + ret = -EINVAL; + goto failed; + } + + if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, min_dpm_level, min); + if (ret) + goto failed; + } + } + +failed: + return ret; +} + static int smu_v14_0_0_get_dpm_ultimate_freq(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *min, @@ -736,7 +925,7 @@ static int smu_v14_0_0_get_dpm_ultimate_freq(struct smu_context *smu, } if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { - ret = smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, max_dpm_level, max); + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, max_dpm_level, max); if (ret) goto failed; } @@ -768,7 +957,7 @@ static int smu_v14_0_0_get_dpm_ultimate_freq(struct smu_context *smu, } if (clk_type != SMU_GFXCLK && clk_type != SMU_SCLK) { - ret = smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, min_dpm_level, min); + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, min_dpm_level, min); if (ret) goto failed; } @@ -778,6 +967,19 @@ failed: return ret; } +static int smu_v14_0_common_get_dpm_ultimate_freq(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *min, + uint32_t *max) +{ + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 0)) + smu_v14_0_0_get_dpm_ultimate_freq(smu, clk_type, min, max); + else if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 1)) + smu_v14_0_1_get_dpm_ultimate_freq(smu, clk_type, min, max); + + return 0; +} + static int smu_v14_0_0_get_current_clk_freq(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *value) @@ -811,6 +1013,37 @@ static int smu_v14_0_0_get_current_clk_freq(struct smu_context *smu, return smu_v14_0_0_get_smu_metrics_data(smu, member_type, value); } +static int smu_v14_0_1_get_dpm_level_count(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *count) +{ + DpmClocks_t_v14_0_1 *clk_table = smu->smu_table.clocks_table; + + switch (clk_type) { + case SMU_SOCCLK: + *count = clk_table->NumSocClkLevelsEnabled; + break; + case SMU_VCLK: + case SMU_DCLK: + *count = clk_table->Vcn0ClkLevelsEnabled; + break; + case SMU_VCLK1: + case SMU_DCLK1: + *count = clk_table->Vcn1ClkLevelsEnabled; + break; + case SMU_MCLK: + *count = clk_table->NumMemPstatesEnabled; + break; + case SMU_FCLK: + *count = clk_table->NumFclkLevelsEnabled; + break; + default: + break; + } + + return 0; +} + static int smu_v14_0_0_get_dpm_level_count(struct smu_context *smu, enum smu_clk_type clk_type, uint32_t *count) @@ -840,6 +1073,18 @@ static int smu_v14_0_0_get_dpm_level_count(struct smu_context *smu, return 0; } +static int smu_v14_0_common_get_dpm_level_count(struct smu_context *smu, + enum smu_clk_type clk_type, + uint32_t *count) +{ + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 0)) + smu_v14_0_0_get_dpm_level_count(smu, clk_type, count); + else if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 1)) + smu_v14_0_1_get_dpm_level_count(smu, clk_type, count); + + return 0; +} + static int smu_v14_0_0_print_clk_levels(struct smu_context *smu, enum smu_clk_type clk_type, char *buf) { @@ -866,18 +1111,20 @@ static int smu_v14_0_0_print_clk_levels(struct smu_context *smu, case SMU_SOCCLK: case SMU_VCLK: case SMU_DCLK: + case SMU_VCLK1: + case SMU_DCLK1: case SMU_MCLK: case SMU_FCLK: ret = smu_v14_0_0_get_current_clk_freq(smu, clk_type, &cur_value); if (ret) break; - ret = smu_v14_0_0_get_dpm_level_count(smu, clk_type, &count); + ret = smu_v14_0_common_get_dpm_level_count(smu, clk_type, &count); if (ret) break; for (i = 0; i < count; i++) { - ret = smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, i, &value); + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, i, &value); if (ret) break; @@ -940,8 +1187,13 @@ static int smu_v14_0_0_set_soft_freq_limited_range(struct smu_context *smu, break; case SMU_VCLK: case SMU_DCLK: - msg_set_min = SMU_MSG_SetHardMinVcn; - msg_set_max = SMU_MSG_SetSoftMaxVcn; + msg_set_min = SMU_MSG_SetHardMinVcn0; + msg_set_max = SMU_MSG_SetSoftMaxVcn0; + break; + case SMU_VCLK1: + case SMU_DCLK1: + msg_set_min = SMU_MSG_SetHardMinVcn1; + msg_set_max = SMU_MSG_SetSoftMaxVcn1; break; default: return -EINVAL; @@ -971,11 +1223,11 @@ static int smu_v14_0_0_force_clk_levels(struct smu_context *smu, case SMU_FCLK: case SMU_VCLK: case SMU_DCLK: - ret = smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, soft_min_level, &min_freq); + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, soft_min_level, &min_freq); if (ret) break; - ret = smu_v14_0_0_get_dpm_freq_by_index(smu, clk_type, soft_max_level, &max_freq); + ret = smu_v14_0_common_get_dpm_freq_by_index(smu, clk_type, soft_max_level, &max_freq); if (ret) break; @@ -1000,25 +1252,25 @@ static int smu_v14_0_0_set_performance_level(struct smu_context *smu, switch (level) { case AMD_DPM_FORCED_LEVEL_HIGH: - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SCLK, NULL, &sclk_max); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_FCLK, NULL, &fclk_max); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SOCCLK, NULL, &socclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SCLK, NULL, &sclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_FCLK, NULL, &fclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SOCCLK, NULL, &socclk_max); sclk_min = sclk_max; fclk_min = fclk_max; socclk_min = socclk_max; break; case AMD_DPM_FORCED_LEVEL_LOW: - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SCLK, &sclk_min, NULL); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_FCLK, &fclk_min, NULL); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SOCCLK, &socclk_min, NULL); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SCLK, &sclk_min, NULL); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_FCLK, &fclk_min, NULL); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SOCCLK, &socclk_min, NULL); sclk_max = sclk_min; fclk_max = fclk_min; socclk_max = socclk_min; break; case AMD_DPM_FORCED_LEVEL_AUTO: - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SCLK, &sclk_min, &sclk_max); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_FCLK, &fclk_min, &fclk_max); - smu_v14_0_0_get_dpm_ultimate_freq(smu, SMU_SOCCLK, &socclk_min, &socclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SCLK, &sclk_min, &sclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_FCLK, &fclk_min, &fclk_max); + smu_v14_0_common_get_dpm_ultimate_freq(smu, SMU_SOCCLK, &socclk_min, &socclk_max); break; case AMD_DPM_FORCED_LEVEL_PROFILE_STANDARD: case AMD_DPM_FORCED_LEVEL_PROFILE_MIN_SCLK: @@ -1067,6 +1319,18 @@ static int smu_v14_0_0_set_performance_level(struct smu_context *smu, return ret; } +static int smu_v14_0_1_set_fine_grain_gfx_freq_parameters(struct smu_context *smu) +{ + DpmClocks_t_v14_0_1 *clk_table = smu->smu_table.clocks_table; + + smu->gfx_default_hard_min_freq = clk_table->MinGfxClk; + smu->gfx_default_soft_max_freq = clk_table->MaxGfxClk; + smu->gfx_actual_hard_min_freq = 0; + smu->gfx_actual_soft_max_freq = 0; + + return 0; +} + static int smu_v14_0_0_set_fine_grain_gfx_freq_parameters(struct smu_context *smu) { DpmClocks_t *clk_table = smu->smu_table.clocks_table; @@ -1079,6 +1343,16 @@ static int smu_v14_0_0_set_fine_grain_gfx_freq_parameters(struct smu_context *sm return 0; } +static int smu_v14_0_common_set_fine_grain_gfx_freq_parameters(struct smu_context *smu) +{ + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 0)) + smu_v14_0_0_set_fine_grain_gfx_freq_parameters(smu); + else if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 1)) + smu_v14_0_1_set_fine_grain_gfx_freq_parameters(smu); + + return 0; +} + static int smu_v14_0_0_set_vpe_enable(struct smu_context *smu, bool enable) { @@ -1095,6 +1369,25 @@ static int smu_v14_0_0_set_umsch_mm_enable(struct smu_context *smu, 0, NULL); } +static int smu_14_0_1_get_dpm_table(struct smu_context *smu, struct dpm_clocks *clock_table) +{ + DpmClocks_t_v14_0_1 *clk_table = smu->smu_table.clocks_table; + uint8_t idx; + + /* Only the Clock information of SOC and VPE is copied to provide VPE DPM settings for use. */ + for (idx = 0; idx < NUM_SOCCLK_DPM_LEVELS; idx++) { + clock_table->SocClocks[idx].Freq = (idx < clk_table->NumSocClkLevelsEnabled) ? clk_table->SocClocks[idx]:0; + clock_table->SocClocks[idx].Vol = 0; + } + + for (idx = 0; idx < NUM_VPE_DPM_LEVELS; idx++) { + clock_table->VPEClocks[idx].Freq = (idx < clk_table->VpeClkLevelsEnabled) ? clk_table->VPEClocks[idx]:0; + clock_table->VPEClocks[idx].Vol = 0; + } + + return 0; +} + static int smu_14_0_0_get_dpm_table(struct smu_context *smu, struct dpm_clocks *clock_table) { DpmClocks_t *clk_table = smu->smu_table.clocks_table; @@ -1114,6 +1407,16 @@ static int smu_14_0_0_get_dpm_table(struct smu_context *smu, struct dpm_clocks * return 0; } +static int smu_v14_0_common_get_dpm_table(struct smu_context *smu, struct dpm_clocks *clock_table) +{ + if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 0)) + smu_14_0_0_get_dpm_table(smu, clock_table); + else if (amdgpu_ip_version(smu->adev, MP1_HWIP, 0) == IP_VERSION(14, 0, 1)) + smu_14_0_1_get_dpm_table(smu, clock_table); + + return 0; +} + static const struct pptable_funcs smu_v14_0_0_ppt_funcs = { .check_fw_status = smu_v14_0_check_fw_status, .check_fw_version = smu_v14_0_check_fw_version, @@ -1135,16 +1438,16 @@ static const struct pptable_funcs smu_v14_0_0_ppt_funcs = { .set_driver_table_location = smu_v14_0_set_driver_table_location, .gfx_off_control = smu_v14_0_gfx_off_control, .mode2_reset = smu_v14_0_0_mode2_reset, - .get_dpm_ultimate_freq = smu_v14_0_0_get_dpm_ultimate_freq, + .get_dpm_ultimate_freq = smu_v14_0_common_get_dpm_ultimate_freq, .od_edit_dpm_table = smu_v14_0_od_edit_dpm_table, .print_clk_levels = smu_v14_0_0_print_clk_levels, .force_clk_levels = smu_v14_0_0_force_clk_levels, .set_performance_level = smu_v14_0_0_set_performance_level, - .set_fine_grain_gfx_freq_parameters = smu_v14_0_0_set_fine_grain_gfx_freq_parameters, + .set_fine_grain_gfx_freq_parameters = smu_v14_0_common_set_fine_grain_gfx_freq_parameters, .set_gfx_power_up_by_imu = smu_v14_0_set_gfx_power_up_by_imu, .dpm_set_vpe_enable = smu_v14_0_0_set_vpe_enable, .dpm_set_umsch_mm_enable = smu_v14_0_0_set_umsch_mm_enable, - .get_dpm_clock_table = smu_14_0_0_get_dpm_table, + .get_dpm_clock_table = smu_v14_0_common_get_dpm_table, }; static void smu_v14_0_0_set_smu_mailbox_registers(struct smu_context *smu) -- cgit v1.3.1 From 533eefb9be76c3b23d220ee18edfda8eb56cefff Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Tue, 12 Dec 2023 17:17:05 +0800 Subject: drm/amdgpu: add smu 14.0.1 discovery support This patch to add smu 14.0.1 support Reviewed-by: Alex Deucher Signed-off-by: Yifan Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c index fdd36fb027ab..ac5bf01fe8d2 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_discovery.c @@ -1896,6 +1896,7 @@ static int amdgpu_discovery_set_smu_ip_blocks(struct amdgpu_device *adev) amdgpu_device_ip_block_add(adev, &smu_v13_0_ip_block); break; case IP_VERSION(14, 0, 0): + case IP_VERSION(14, 0, 1): amdgpu_device_ip_block_add(adev, &smu_v14_0_ip_block); break; default: -- cgit v1.3.1 From f886b49feaae30acd599e37d4284836024b0f3ed Mon Sep 17 00:00:00 2001 From: Tao Zhou Date: Thu, 28 Mar 2024 18:22:10 +0800 Subject: drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2 SDMA_CNTL is not set in some cases, driver configures it by itself. v2: simplify code Signed-off-by: Tao Zhou Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c index 34237a1b1f2e..82eab49be82b 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_4_2.c @@ -1602,19 +1602,9 @@ static int sdma_v4_4_2_set_ecc_irq_state(struct amdgpu_device *adev, u32 sdma_cntl; sdma_cntl = RREG32_SDMA(type, regSDMA_CNTL); - switch (state) { - case AMDGPU_IRQ_STATE_DISABLE: - sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA_CNTL, - DRAM_ECC_INT_ENABLE, 0); - WREG32_SDMA(type, regSDMA_CNTL, sdma_cntl); - break; - /* sdma ecc interrupt is enabled by default - * driver doesn't need to do anything to - * enable the interrupt */ - case AMDGPU_IRQ_STATE_ENABLE: - default: - break; - } + sdma_cntl = REG_SET_FIELD(sdma_cntl, SDMA_CNTL, DRAM_ECC_INT_ENABLE, + state == AMDGPU_IRQ_STATE_ENABLE ? 1 : 0); + WREG32_SDMA(type, regSDMA_CNTL, sdma_cntl); return 0; } -- cgit v1.3.1 From ecedd99a9369fb5cde601ae9abd58bca2739f1ae Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Fri, 15 Mar 2024 21:25:25 -0600 Subject: drm/amd/display: Skip on writeback when it's not applicable [WHY] dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199 Reviewed-by: Harry Wentland Reviewed-by: Rodrigo Siqueira Acked-by: Roman Li Signed-off-by: Alex Hung Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 173438fc7537..6cf0d5f276fe 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3047,6 +3047,10 @@ static int dm_resume(void *handle) /* Do mst topology probing after resuming cached state*/ drm_connector_list_iter_begin(ddev, &iter); drm_for_each_connector_iter(connector, &iter) { + + if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) + continue; + aconnector = to_amdgpu_dm_connector(connector); if (aconnector->dc_link->type != dc_connection_mst_branch || aconnector->mst_root) @@ -5926,6 +5930,9 @@ get_highest_refresh_rate_mode(struct amdgpu_dm_connector *aconnector, &aconnector->base.probed_modes : &aconnector->base.modes; + if (aconnector->base.connector_type == DRM_MODE_CONNECTOR_WRITEBACK) + return NULL; + if (aconnector->freesync_vid_base.clock != 0) return &aconnector->freesync_vid_base; @@ -8767,10 +8774,10 @@ static void amdgpu_dm_commit_audio(struct drm_device *dev, if (!drm_atomic_crtc_needs_modeset(new_crtc_state)) continue; +notify: if (connector->connector_type == DRM_MODE_CONNECTOR_WRITEBACK) continue; -notify: aconnector = to_amdgpu_dm_connector(connector); mutex_lock(&adev->dm.audio_lock); -- cgit v1.3.1 From 3818708e9c9712e2ba4006bc23502ee7b031bd3f Mon Sep 17 00:00:00 2001 From: Kenneth Feng Date: Thu, 28 Mar 2024 11:00:50 +0800 Subject: drm/amd/pm: fix the high voltage issue after unload fix the high voltage issue after unload on smu 13.0.10 Signed-off-by: Kenneth Feng Reviewed-by: Hawking Zhang Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 26 ++++++++++++--------- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 27 ++++++++++++++++++++-- drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h | 1 + .../gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c | 8 ++++++- 4 files changed, 48 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c index aa16d51dd842..7753a2e64d41 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c @@ -4135,18 +4135,22 @@ int amdgpu_device_init(struct amdgpu_device *adev, adev->ip_blocks[i].status.hw = true; } } + } else if (amdgpu_ip_version(adev, MP1_HWIP, 0) == IP_VERSION(13, 0, 10) && + !amdgpu_device_has_display_hardware(adev)) { + r = psp_gpu_reset(adev); } else { - tmp = amdgpu_reset_method; - /* It should do a default reset when loading or reloading the driver, - * regardless of the module parameter reset_method. - */ - amdgpu_reset_method = AMD_RESET_METHOD_NONE; - r = amdgpu_asic_reset(adev); - amdgpu_reset_method = tmp; - if (r) { - dev_err(adev->dev, "asic reset on init failed\n"); - goto failed; - } + tmp = amdgpu_reset_method; + /* It should do a default reset when loading or reloading the driver, + * regardless of the module parameter reset_method. + */ + amdgpu_reset_method = AMD_RESET_METHOD_NONE; + r = amdgpu_asic_reset(adev); + amdgpu_reset_method = tmp; + } + + if (r) { + dev_err(adev->dev, "asic reset on init failed\n"); + goto failed; } } diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index 246b211b1e85..65333141b1c1 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -735,7 +735,7 @@ static int smu_early_init(void *handle) smu->adev = adev; smu->pm_enabled = !!amdgpu_dpm; smu->is_apu = false; - smu->smu_baco.state = SMU_BACO_STATE_EXIT; + smu->smu_baco.state = SMU_BACO_STATE_NONE; smu->smu_baco.platform_support = false; smu->user_dpm_profile.fan_mode = -1; @@ -1966,10 +1966,25 @@ static int smu_smc_hw_cleanup(struct smu_context *smu) return 0; } +static int smu_reset_mp1_state(struct smu_context *smu) +{ + struct amdgpu_device *adev = smu->adev; + int ret = 0; + + if ((!adev->in_runpm) && (!adev->in_suspend) && + (!amdgpu_in_reset(adev)) && amdgpu_ip_version(adev, MP1_HWIP, 0) == + IP_VERSION(13, 0, 10) && + !amdgpu_device_has_display_hardware(adev)) + ret = smu_set_mp1_state(smu, PP_MP1_STATE_UNLOAD); + + return ret; +} + static int smu_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; struct smu_context *smu = adev->powerplay.pp_handle; + int ret; if (amdgpu_sriov_vf(adev) && !amdgpu_sriov_is_pp_one_vf(adev)) return 0; @@ -1987,7 +2002,15 @@ static int smu_hw_fini(void *handle) adev->pm.dpm_enabled = false; - return smu_smc_hw_cleanup(smu); + ret = smu_smc_hw_cleanup(smu); + if (ret) + return ret; + + ret = smu_reset_mp1_state(smu); + if (ret) + return ret; + + return 0; } static void smu_late_fini(void *handle) diff --git a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h index a870bdd49a4e..1fa81575788c 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h +++ b/drivers/gpu/drm/amd/pm/swsmu/inc/amdgpu_smu.h @@ -424,6 +424,7 @@ enum smu_reset_mode { enum smu_baco_state { SMU_BACO_STATE_ENTER = 0, SMU_BACO_STATE_EXIT, + SMU_BACO_STATE_NONE, }; struct smu_baco_context { diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c index 9c03296f92cd..67117ced7c6a 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c +++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/smu_v13_0_0_ppt.c @@ -2751,7 +2751,13 @@ static int smu_v13_0_0_set_mp1_state(struct smu_context *smu, switch (mp1_state) { case PP_MP1_STATE_UNLOAD: - ret = smu_cmn_set_mp1_state(smu, mp1_state); + ret = smu_cmn_send_smc_msg_with_param(smu, + SMU_MSG_PrepareMp1ForUnload, + 0x55, NULL); + + if (!ret && smu->smu_baco.state == SMU_BACO_STATE_EXIT) + ret = smu_v13_0_disable_pmfw_state(smu); + break; default: /* Ignore others */ -- cgit v1.3.1 From f7e232de51bb1b45646e5b7dc4ebcf13510f2630 Mon Sep 17 00:00:00 2001 From: Lijo Lazar Date: Wed, 6 Mar 2024 17:05:07 +0530 Subject: drm/amdgpu: Fix VCN allocation in CPX partition VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In certain configs, VCN instance can be exclusively allocated to a partition even under CPX mode. Signed-off-by: Lijo Lazar Reviewed-by: James Zhu Reviewed-by: Asad Kamal Acked-by: Alex Deucher Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c b/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c index d6f808acfb17..fbb43ae7624f 100644 --- a/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c +++ b/drivers/gpu/drm/amd/amdgpu/aqua_vanjaram.c @@ -62,6 +62,11 @@ void aqua_vanjaram_doorbell_index_init(struct amdgpu_device *adev) adev->doorbell_index.max_assignment = AMDGPU_DOORBELL_LAYOUT1_MAX_ASSIGNMENT << 1; } +static bool aqua_vanjaram_xcp_vcn_shared(struct amdgpu_device *adev) +{ + return (adev->xcp_mgr->num_xcps > adev->vcn.num_vcn_inst); +} + static void aqua_vanjaram_set_xcp_id(struct amdgpu_device *adev, uint32_t inst_idx, struct amdgpu_ring *ring) { @@ -87,7 +92,7 @@ static void aqua_vanjaram_set_xcp_id(struct amdgpu_device *adev, case AMDGPU_RING_TYPE_VCN_ENC: case AMDGPU_RING_TYPE_VCN_JPEG: ip_blk = AMDGPU_XCP_VCN; - if (adev->xcp_mgr->mode == AMDGPU_CPX_PARTITION_MODE) + if (aqua_vanjaram_xcp_vcn_shared(adev)) inst_mask = 1 << (inst_idx * 2); break; default: @@ -140,10 +145,12 @@ static int aqua_vanjaram_xcp_sched_list_update( aqua_vanjaram_xcp_gpu_sched_update(adev, ring, ring->xcp_id); - /* VCN is shared by two partitions under CPX MODE */ + /* VCN may be shared by two partitions under CPX MODE in certain + * configs. + */ if ((ring->funcs->type == AMDGPU_RING_TYPE_VCN_ENC || - ring->funcs->type == AMDGPU_RING_TYPE_VCN_JPEG) && - adev->xcp_mgr->mode == AMDGPU_CPX_PARTITION_MODE) + ring->funcs->type == AMDGPU_RING_TYPE_VCN_JPEG) && + aqua_vanjaram_xcp_vcn_shared(adev)) aqua_vanjaram_xcp_gpu_sched_update(adev, ring, ring->xcp_id + 1); } -- cgit v1.3.1 From e33997e18d0fddd217a0fce988abbfd015338631 Mon Sep 17 00:00:00 2001 From: ZhenGuo Yin Date: Tue, 2 Apr 2024 11:41:05 +0800 Subject: drm/amdgpu: clear set_q_mode_offs when VM changed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [Why] set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE packet to init shadow memory will be skiped, hence there has a page fault. [How] VM flush is needed after GPU reset, clear set_q_mode_offs when emitting VM flush. Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2") Reviewed-by: Christian König Signed-off-by: ZhenGuo Yin Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index 1770e496c1b7..2c82e2741619 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -5465,6 +5465,7 @@ static void gfx_v11_0_ring_emit_vm_flush(struct amdgpu_ring *ring, /* Make sure that we can't skip the SET_Q_MODE packets when the VM * changed in any way. */ + ring->set_q_mode_offs = 0; ring->set_q_mode_ptr = NULL; } -- cgit v1.3.1 From d06af584be5a769d124b7302b32a033e9559761d Mon Sep 17 00:00:00 2001 From: Zhigang Luo Date: Mon, 18 Mar 2024 14:13:10 -0400 Subject: amd/amdkfd: sync all devices to wait all processes being evicted If there are more than one device doing reset in parallel, the first device will call kfd_suspend_all_processes() to evict all processes on all devices, this call takes time to finish. other device will start reset and recover without waiting. if the process has not been evicted before doing recover, it will be restored, then caused page fault. Signed-off-by: Zhigang Luo Reviewed-by: Felix Kuehling Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdkfd/kfd_device.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_device.c b/drivers/gpu/drm/amd/amdkfd/kfd_device.c index 041ec3de55e7..719d6d365e15 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_device.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_device.c @@ -960,7 +960,6 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm) { struct kfd_node *node; int i; - int count; if (!kfd->init_complete) return; @@ -968,12 +967,10 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm) /* for runtime suspend, skip locking kfd */ if (!run_pm) { mutex_lock(&kfd_processes_mutex); - count = ++kfd_locked; - mutex_unlock(&kfd_processes_mutex); - /* For first KFD device suspend all the KFD processes */ - if (count == 1) + if (++kfd_locked == 1) kfd_suspend_all_processes(); + mutex_unlock(&kfd_processes_mutex); } for (i = 0; i < kfd->num_nodes; i++) { @@ -984,7 +981,7 @@ void kgd2kfd_suspend(struct kfd_dev *kfd, bool run_pm) int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm) { - int ret, count, i; + int ret, i; if (!kfd->init_complete) return 0; @@ -998,12 +995,10 @@ int kgd2kfd_resume(struct kfd_dev *kfd, bool run_pm) /* for runtime resume, skip unlocking kfd */ if (!run_pm) { mutex_lock(&kfd_processes_mutex); - count = --kfd_locked; - mutex_unlock(&kfd_processes_mutex); - - WARN_ONCE(count < 0, "KFD suspend / resume ref. error"); - if (count == 0) + if (--kfd_locked == 0) ret = kfd_resume_all_processes(); + WARN_ONCE(kfd_locked < 0, "KFD suspend / resume ref. error"); + mutex_unlock(&kfd_processes_mutex); } return ret; -- cgit v1.3.1 From 2cc69a10d83180f3de9f5afe3a98e972b1453d4c Mon Sep 17 00:00:00 2001 From: Alex Hung Date: Sat, 23 Mar 2024 12:02:54 -0600 Subject: drm/amd/display: Return max resolution supported by DWB mode_config's max width x height is 4096x2160 and is higher than DWB's max resolution 3840x2160 which is returned instead. Cc: stable@vger.kernel.org Reviewed-by: Harry Wentland Acked-by: Hamza Mahfooz Signed-off-by: Alex Hung Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c index 16e72d623630..08c494a7a21b 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_wb.c @@ -76,10 +76,8 @@ static int amdgpu_dm_wb_encoder_atomic_check(struct drm_encoder *encoder, static int amdgpu_dm_wb_connector_get_modes(struct drm_connector *connector) { - struct drm_device *dev = connector->dev; - - return drm_add_modes_noedid(connector, dev->mode_config.max_width, - dev->mode_config.max_height); + /* Maximum resolution supported by DWB */ + return drm_add_modes_noedid(connector, 3840, 2160); } static int amdgpu_dm_wb_prepare_job(struct drm_writeback_connector *wb_connector, -- cgit v1.3.1 From bbca7f414ae9a12ea231cdbafd79c607e3337ea8 Mon Sep 17 00:00:00 2001 From: Tim Huang Date: Wed, 3 Apr 2024 17:28:44 +0800 Subject: drm/amdgpu: fix incorrect number of active RBs for gfx11 The RB bitmap should be global active RB bitmap & active RB bitmap based on active SA. Signed-off-by: Tim Huang Reviewed-by: Yifan Zhang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c index 2c82e2741619..f7325b02a191 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c @@ -1635,7 +1635,7 @@ static void gfx_v11_0_setup_rb(struct amdgpu_device *adev) active_rb_bitmap |= (0x3 << (i * rb_bitmap_width_per_sa)); } - active_rb_bitmap |= global_active_rb_bitmap; + active_rb_bitmap &= global_active_rb_bitmap; adev->gfx.config.backend_enable_mask = active_rb_bitmap; adev->gfx.config.num_rbs = hweight32(active_rb_bitmap); } -- cgit v1.3.1 From 81901d8d0472e9a19d294ae1dea76b950548195d Mon Sep 17 00:00:00 2001 From: Wenjing Liu Date: Fri, 22 Mar 2024 15:02:45 -0400 Subject: drm/amd/display: always reset ODM mode in context when adding first plane [why] In current implemenation ODM mode is only reset when the last plane is removed from dc state. For any dc validate we will always remove all current planes and add new planes. However when switching from no planes to 1 plane, ODM mode is not reset because no planes get removed. This has caused an issue where we kept ODM combine when it should have been remove when a plane is added. The change is to reset ODM mode when adding the first plane. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee Acked-by: Hamza Mahfooz Signed-off-by: Wenjing Liu Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc_state.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_state.c b/drivers/gpu/drm/amd/display/dc/core/dc_state.c index 5cc7f8da209c..61986e5cb491 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_state.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_state.c @@ -436,6 +436,15 @@ bool dc_state_add_plane( goto out; } + if (stream_status->plane_count == 0 && dc->config.enable_windowed_mpo_odm) + /* ODM combine could prevent us from supporting more planes + * we will reset ODM slice count back to 1 when all planes have + * been removed to maximize the amount of planes supported when + * new planes are added. + */ + resource_update_pipes_for_stream_with_slice_count( + state, dc->current_state, dc->res_pool, stream, 1); + otg_master_pipe = resource_get_otg_master_for_stream( &state->res_ctx, stream); if (otg_master_pipe) -- cgit v1.3.1 From 953927587f37b731abdeabe46ad44a3b3ec67a52 Mon Sep 17 00:00:00 2001 From: Dillon Varone Date: Thu, 21 Mar 2024 13:49:43 -0400 Subject: drm/amd/display: Do not recursively call manual trigger programming [WHY&HOW] We should not be recursively calling the manual trigger programming function when FAMS is not in use. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee Acked-by: Hamza Mahfooz Signed-off-by: Dillon Varone Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c b/drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c index f07a4c7e48bc..52eab8fccb7f 100644 --- a/drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c +++ b/drivers/gpu/drm/amd/display/dc/optc/dcn32/dcn32_optc.c @@ -267,9 +267,6 @@ static void optc32_setup_manual_trigger(struct timing_generator *optc) OTG_V_TOTAL_MAX_SEL, 1, OTG_FORCE_LOCK_ON_EVENT, 0, OTG_SET_V_TOTAL_MIN_MASK, (1 << 1)); /* TRIGA */ - - // Setup manual flow control for EOF via TRIG_A - optc->funcs->setup_manual_trigger(optc); } } -- cgit v1.3.1 From cf79814cb0bf5749b9f0db53ca231aa540c02768 Mon Sep 17 00:00:00 2001 From: Fudongwang Date: Tue, 26 Mar 2024 16:03:16 +0800 Subject: drm/amd/display: fix disable otg wa logic in DCN316 [Why] Wrong logic cause screen corruption. [How] Port logic from DCN35/314. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Fudongwang Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c index 12f3e8aa46d8..6ad4f4efec5d 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c @@ -99,20 +99,25 @@ static int dcn316_get_active_display_cnt_wa( return display_count; } -static void dcn316_disable_otg_wa(struct clk_mgr *clk_mgr_base, struct dc_state *context, bool disable) +static void dcn316_disable_otg_wa(struct clk_mgr *clk_mgr_base, struct dc_state *context, + bool safe_to_lower, bool disable) { struct dc *dc = clk_mgr_base->ctx->dc; int i; for (i = 0; i < dc->res_pool->pipe_count; ++i) { - struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i]; + struct pipe_ctx *pipe = safe_to_lower + ? &context->res_ctx.pipe_ctx[i] + : &dc->current_state->res_ctx.pipe_ctx[i]; if (pipe->top_pipe || pipe->prev_odm_pipe) continue; - if (pipe->stream && (pipe->stream->dpms_off || pipe->plane_state == NULL || - dc_is_virtual_signal(pipe->stream->signal))) { + if (pipe->stream && (pipe->stream->dpms_off || dc_is_virtual_signal(pipe->stream->signal) || + !pipe->stream->link_enc)) { if (disable) { - pipe->stream_res.tg->funcs->immediate_disable_crtc(pipe->stream_res.tg); + if (pipe->stream_res.tg && pipe->stream_res.tg->funcs->immediate_disable_crtc) + pipe->stream_res.tg->funcs->immediate_disable_crtc(pipe->stream_res.tg); + reset_sync_context_for_pipe(dc, context, i); } else pipe->stream_res.tg->funcs->enable_crtc(pipe->stream_res.tg); @@ -207,11 +212,11 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, } if (should_set_clock(safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { - dcn316_disable_otg_wa(clk_mgr_base, context, true); + dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, true); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; dcn316_smu_set_dispclk(clk_mgr, clk_mgr_base->clks.dispclk_khz); - dcn316_disable_otg_wa(clk_mgr_base, context, false); + dcn316_disable_otg_wa(clk_mgr_base, context, safe_to_lower, false); update_dispclk = true; } -- cgit v1.3.1 From 9e61ef8d219877202d4ee51d0d2ad9072c99a262 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Tue, 12 Mar 2024 11:55:52 -0400 Subject: drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4 In order for display colorimetry to work correctly on DP displays we need to send the VSC SDP packet. We should only do so for panels with DPCD revision greater or equal to 1.4 as older receivers might have problems with it. Cc: stable@vger.kernel.org Cc: Joshua Ashton Cc: Xaver Hugl Cc: Melissa Wen Cc: Agustin Gutierrez Reviewed-by: Agustin Gutierrez Acked-by: Hamza Mahfooz Signed-off-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6cf0d5f276fe..d112ce6c812c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6318,7 +6318,9 @@ create_stream_for_sink(struct drm_connector *connector, if (stream->signal == SIGNAL_TYPE_HDMI_TYPE_A) mod_build_hf_vsif_infopacket(stream, &stream->vsp_infopacket); - if (stream->link->psr_settings.psr_feature_enabled || stream->link->replay_settings.replay_feature_enabled) { + if (stream->signal == SIGNAL_TYPE_DISPLAY_PORT || + stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST || + stream->signal == SIGNAL_TYPE_EDP) { // // should decide stream support vsc sdp colorimetry capability // before building vsc info packet @@ -6328,7 +6330,8 @@ create_stream_for_sink(struct drm_connector *connector, stream->use_vsc_sdp_for_colorimetry = aconnector->dc_sink->is_vsc_sdp_colorimetry_supported; } else { - if (stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) + if (stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 && + stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) stream->use_vsc_sdp_for_colorimetry = true; } if (stream->out_transfer_func->tf == TRANSFER_FUNCTION_GAMMA22) -- cgit v1.3.1 From c3e2a5f2da904a18661335e8be2b961738574998 Mon Sep 17 00:00:00 2001 From: Harry Wentland Date: Thu, 21 Mar 2024 11:13:38 -0400 Subject: drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST The previous check for the is_vsc_sdp_colorimetry_supported flag for MST sink signals did nothing. Simplify the code and use the same check for MST and SST. Cc: stable@vger.kernel.org Reviewed-by: Agustin Gutierrez Acked-by: Hamza Mahfooz Signed-off-by: Harry Wentland Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index d112ce6c812c..6d2f60c61dec 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6325,15 +6325,9 @@ create_stream_for_sink(struct drm_connector *connector, // should decide stream support vsc sdp colorimetry capability // before building vsc info packet // - stream->use_vsc_sdp_for_colorimetry = false; - if (aconnector->dc_sink->sink_signal == SIGNAL_TYPE_DISPLAY_PORT_MST) { - stream->use_vsc_sdp_for_colorimetry = - aconnector->dc_sink->is_vsc_sdp_colorimetry_supported; - } else { - if (stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 && - stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED) - stream->use_vsc_sdp_for_colorimetry = true; - } + stream->use_vsc_sdp_for_colorimetry = stream->link->dpcd_caps.dpcd_rev.raw >= 0x14 && + stream->link->dpcd_caps.dprx_feature.bits.VSC_SDP_COLORIMETRY_SUPPORTED; + if (stream->out_transfer_func->tf == TRANSFER_FUNCTION_GAMMA22) tf = TRANSFER_FUNC_GAMMA_22; mod_build_vsc_infopacket(stream, &stream->vsc_infopacket, stream->output_color_space, tf); -- cgit v1.3.1 From e047dd448d2bc12b8c30d7e3e6e98cea1fc28a17 Mon Sep 17 00:00:00 2001 From: Zhongwei Date: Wed, 27 Mar 2024 13:49:40 +0800 Subject: drm/amd/display: Adjust dprefclk by down spread percentage. [Why] OLED panels show no display for large vtotal timings. [How] Check if ss is enabled and read from lut for spread spectrum percentage. Adjust dprefclk as required. DP_DTO adjustment is for edp only. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas Acked-by: Hamza Mahfooz Signed-off-by: Zhongwei Signed-off-by: Alex Deucher --- .../amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c | 50 ++++++++++++++++++++++ .../gpu/drm/amd/display/dc/dce/dce_clock_source.c | 8 ++-- 2 files changed, 54 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c index 101fe96287cb..d9c5692c86c2 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn35/dcn35_clk_mgr.c @@ -73,6 +73,12 @@ #define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_SEL_MASK 0x00000007L #define CLK1_CLK2_BYPASS_CNTL__CLK2_BYPASS_DIV_MASK 0x000F0000L +#define regCLK5_0_CLK5_spll_field_8 0x464b +#define regCLK5_0_CLK5_spll_field_8_BASE_IDX 0 + +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en__SHIFT 0xd +#define CLK5_0_CLK5_spll_field_8__spll_ssc_en_MASK 0x00002000L + #define SMU_VER_THRESHOLD 0x5D4A00 //93.74.0 #define REG(reg_name) \ @@ -411,6 +417,17 @@ static void dcn35_dump_clk_registers(struct clk_state_registers_and_bypass *regs { } +static bool dcn35_is_spll_ssc_enabled(struct clk_mgr *clk_mgr_base) +{ + struct clk_mgr_internal *clk_mgr = TO_CLK_MGR_INTERNAL(clk_mgr_base); + struct dc_context *ctx = clk_mgr->base.ctx; + uint32_t ssc_enable; + + REG_GET(CLK5_0_CLK5_spll_field_8, spll_ssc_en, &ssc_enable); + + return ssc_enable == 1; +} + static void init_clk_states(struct clk_mgr *clk_mgr) { struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr); @@ -428,7 +445,16 @@ static void init_clk_states(struct clk_mgr *clk_mgr) void dcn35_init_clocks(struct clk_mgr *clk_mgr) { + struct clk_mgr_internal *clk_mgr_int = TO_CLK_MGR_INTERNAL(clk_mgr); init_clk_states(clk_mgr); + + // to adjust dp_dto reference clock if ssc is enable otherwise to apply dprefclk + if (dcn35_is_spll_ssc_enabled(clk_mgr)) + clk_mgr->dp_dto_source_clock_in_khz = + dce_adjust_dp_ref_freq_for_ss(clk_mgr_int, clk_mgr->dprefclk_khz); + else + clk_mgr->dp_dto_source_clock_in_khz = clk_mgr->dprefclk_khz; + } static struct clk_bw_params dcn35_bw_params = { .vram_type = Ddr4MemType, @@ -517,6 +543,28 @@ static DpmClocks_t_dcn35 dummy_clocks; static struct dcn35_watermarks dummy_wms = { 0 }; +static struct dcn35_ss_info_table ss_info_table = { + .ss_divider = 1000, + .ss_percentage = {0, 0, 375, 375, 375} +}; + +static void dcn35_read_ss_info_from_lut(struct clk_mgr_internal *clk_mgr) +{ + struct dc_context *ctx = clk_mgr->base.ctx; + uint32_t clock_source; + + REG_GET(CLK1_CLK2_BYPASS_CNTL, CLK2_BYPASS_SEL, &clock_source); + // If it's DFS mode, clock_source is 0. + if (dcn35_is_spll_ssc_enabled(&clk_mgr->base) && (clock_source < ARRAY_SIZE(ss_info_table.ss_percentage))) { + clk_mgr->dprefclk_ss_percentage = ss_info_table.ss_percentage[clock_source]; + + if (clk_mgr->dprefclk_ss_percentage != 0) { + clk_mgr->ss_on_dprefclk = true; + clk_mgr->dprefclk_ss_divider = ss_info_table.ss_divider; + } + } +} + static void dcn35_build_watermark_ranges(struct clk_bw_params *bw_params, struct dcn35_watermarks *table) { int i, num_valid_sets; @@ -1061,6 +1109,8 @@ void dcn35_clk_mgr_construct( dce_clock_read_ss_info(&clk_mgr->base); /*when clk src is from FCH, it could have ss, same clock src as DPREF clk*/ + dcn35_read_ss_info_from_lut(&clk_mgr->base); + clk_mgr->base.base.bw_params = &dcn35_bw_params; if (clk_mgr->base.base.ctx->dc->debug.pstate_enabled) { diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c index 970644b695cd..b5e0289d2fe8 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clock_source.c @@ -976,7 +976,10 @@ static bool dcn31_program_pix_clk( struct bp_pixel_clock_parameters bp_pc_params = {0}; enum transmitter_color_depth bp_pc_colour_depth = TRANSMITTER_COLOR_DEPTH_24; - if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0) + // Apply ssed(spread spectrum) dpref clock for edp only. + if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0 + && pix_clk_params->signal_type == SIGNAL_TYPE_EDP + && encoding == DP_8b_10b_ENCODING) dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz; // For these signal types Driver to program DP_DTO without calling VBIOS Command table if (dc_is_dp_signal(pix_clk_params->signal_type) || dc_is_virtual_signal(pix_clk_params->signal_type)) { @@ -1093,9 +1096,6 @@ static bool get_pixel_clk_frequency_100hz( unsigned int modulo_hz = 0; unsigned int dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dprefclk_khz; - if (clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz != 0) - dp_dto_ref_khz = clock_source->ctx->dc->clk_mgr->dp_dto_source_clock_in_khz; - if (clock_source->id == CLOCK_SOURCE_ID_DP_DTO) { clock_hz = REG_READ(PHASE[inst]); -- cgit v1.3.1 From 6dba20d23e85034901ccb765a7ca71199bcca4df Mon Sep 17 00:00:00 2001 From: Yifan Zhang Date: Sun, 7 Apr 2024 22:01:35 +0800 Subject: drm/amdgpu: differentiate external rev id for gfx 11.5.0 This patch to differentiate external rev id for gfx 11.5.0. Signed-off-by: Yifan Zhang Reviewed-by: Tim Huang Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/soc21.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/soc21.c b/drivers/gpu/drm/amd/amdgpu/soc21.c index abe319b0f063..43ca63fe85ac 100644 --- a/drivers/gpu/drm/amd/amdgpu/soc21.c +++ b/drivers/gpu/drm/amd/amdgpu/soc21.c @@ -720,7 +720,10 @@ static int soc21_common_early_init(void *handle) AMD_PG_SUPPORT_VCN | AMD_PG_SUPPORT_JPEG | AMD_PG_SUPPORT_GFX_PG; - adev->external_rev_id = adev->rev_id + 0x1; + if (adev->rev_id == 0) + adev->external_rev_id = 0x1; + else + adev->external_rev_id = adev->rev_id + 0x10; break; case IP_VERSION(11, 5, 1): adev->cg_flags = -- cgit v1.3.1 From 81665adf25d28a00a986533f1d3a5df76b79cad9 Mon Sep 17 00:00:00 2001 From: Brett Creeley Date: Mon, 8 Apr 2024 09:35:40 -0700 Subject: pds_core: Fix pdsc_check_pci_health function to use work thread When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by: Shannon Nelson Signed-off-by: Brett Creeley Reviewed-by: Jacob Keller Signed-off-by: David S. Miller --- drivers/net/ethernet/amd/pds_core/core.c | 13 ++++++++++++- drivers/net/ethernet/amd/pds_core/core.h | 2 ++ drivers/net/ethernet/amd/pds_core/dev.c | 3 +++ drivers/net/ethernet/amd/pds_core/main.c | 1 + 4 files changed, 18 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amd/pds_core/core.c b/drivers/net/ethernet/amd/pds_core/core.c index 9662ee72814c..536635e57727 100644 --- a/drivers/net/ethernet/amd/pds_core/core.c +++ b/drivers/net/ethernet/amd/pds_core/core.c @@ -593,6 +593,16 @@ err_out: pdsc_teardown(pdsc, PDSC_TEARDOWN_RECOVERY); } +void pdsc_pci_reset_thread(struct work_struct *work) +{ + struct pdsc *pdsc = container_of(work, struct pdsc, pci_reset_work); + struct pci_dev *pdev = pdsc->pdev; + + pci_dev_get(pdev); + pci_reset_function(pdev); + pci_dev_put(pdev); +} + static void pdsc_check_pci_health(struct pdsc *pdsc) { u8 fw_status; @@ -607,7 +617,8 @@ static void pdsc_check_pci_health(struct pdsc *pdsc) if (fw_status != PDS_RC_BAD_PCI) return; - pci_reset_function(pdsc->pdev); + /* prevent deadlock between pdsc_reset_prepare and pdsc_health_thread */ + queue_work(pdsc->wq, &pdsc->pci_reset_work); } void pdsc_health_thread(struct work_struct *work) diff --git a/drivers/net/ethernet/amd/pds_core/core.h b/drivers/net/ethernet/amd/pds_core/core.h index 92d7657dd614..a3e17a0c187a 100644 --- a/drivers/net/ethernet/amd/pds_core/core.h +++ b/drivers/net/ethernet/amd/pds_core/core.h @@ -197,6 +197,7 @@ struct pdsc { struct pdsc_qcq notifyqcq; u64 last_eid; struct pdsc_viftype *viftype_status; + struct work_struct pci_reset_work; }; /** enum pds_core_dbell_bits - bitwise composition of dbell values. @@ -313,5 +314,6 @@ int pdsc_firmware_update(struct pdsc *pdsc, const struct firmware *fw, void pdsc_fw_down(struct pdsc *pdsc); void pdsc_fw_up(struct pdsc *pdsc); +void pdsc_pci_reset_thread(struct work_struct *work); #endif /* _PDSC_H_ */ diff --git a/drivers/net/ethernet/amd/pds_core/dev.c b/drivers/net/ethernet/amd/pds_core/dev.c index e494e1298dc9..495ef4ef8c10 100644 --- a/drivers/net/ethernet/amd/pds_core/dev.c +++ b/drivers/net/ethernet/amd/pds_core/dev.c @@ -229,6 +229,9 @@ int pdsc_devcmd_reset(struct pdsc *pdsc) .reset.opcode = PDS_CORE_CMD_RESET, }; + if (!pdsc_is_fw_running(pdsc)) + return 0; + return pdsc_devcmd(pdsc, &cmd, &comp, pdsc->devcmd_timeout); } diff --git a/drivers/net/ethernet/amd/pds_core/main.c b/drivers/net/ethernet/amd/pds_core/main.c index ab6133e7db42..660268ff9562 100644 --- a/drivers/net/ethernet/amd/pds_core/main.c +++ b/drivers/net/ethernet/amd/pds_core/main.c @@ -239,6 +239,7 @@ static int pdsc_init_pf(struct pdsc *pdsc) snprintf(wq_name, sizeof(wq_name), "%s.%d", PDS_CORE_DRV_NAME, pdsc->uid); pdsc->wq = create_singlethread_workqueue(wq_name); INIT_WORK(&pdsc->health_work, pdsc_health_thread); + INIT_WORK(&pdsc->pci_reset_work, pdsc_pci_reset_thread); timer_setup(&pdsc->wdtimer, pdsc_wdtimer_cb, 0); pdsc->wdtimer_period = PDSC_WATCHDOG_SECS * HZ; -- cgit v1.3.1 From c38fa07dc69f0b9e6f43ecab96dc7861a70c827c Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Fri, 1 Mar 2024 15:22:53 +0200 Subject: thunderbolt: Fix wake configurations after device unplug Currently we don't configure correctly the wake events after unplug of device router. What can happen is that the downstream ports of host router will be configured to wake on: USB4-wake and wake-on-disconnect, but not on wake-on-connect. This may cause the later plugged device not to wake the domain and fail in enumeration. Fix this by clearing downstream port's "USB4 Port is Configured" bit, after unplug of a device router. Signed-off-by: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg --- drivers/thunderbolt/switch.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 6ffc4e81ffed..4edfd6e34e31 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -3180,22 +3180,29 @@ void tb_switch_unconfigure_link(struct tb_switch *sw) { struct tb_port *up, *down; - if (sw->is_unplugged) - return; if (!tb_route(sw) || tb_switch_is_icm(sw)) return; + /* + * Unconfigure downstream port so that wake-on-connect can be + * configured after router unplug. No need to unconfigure upstream port + * since its router is unplugged. + */ up = tb_upstream_port(sw); - if (tb_switch_is_usb4(up->sw)) - usb4_port_unconfigure(up); - else - tb_lc_unconfigure_port(up); - down = up->remote; if (tb_switch_is_usb4(down->sw)) usb4_port_unconfigure(down); else tb_lc_unconfigure_port(down); + + if (sw->is_unplugged) + return; + + up = tb_upstream_port(sw); + if (tb_switch_is_usb4(up->sw)) + usb4_port_unconfigure(up); + else + tb_lc_unconfigure_port(up); } static void tb_switch_credits_init(struct tb_switch *sw) -- cgit v1.3.1 From dcd12acaf384c30437fa5a9a1f71df06fc9835fd Mon Sep 17 00:00:00 2001 From: Gil Fine Date: Fri, 1 Mar 2024 15:11:18 +0200 Subject: thunderbolt: Avoid notify PM core about runtime PM resume Currently we notify PM core about occurred wakes after any resume. This is not actually needed after resume from runtime suspend. Hence, notify PM core about occurred wakes only after resume from system sleep. Also, if the wake occurred in USB4 router upstream port, we don't notify the PM core about it since it is not actually needed and can cause unexpected autowake (e.g. if /sys/power/wakeup_count is used). While there add the missing kernel-doc for tb_switch_resume(). Signed-off-by: Gil Fine Cc: stable@vger.kernel.org Signed-off-by: Mika Westerberg --- drivers/thunderbolt/switch.c | 27 +++++++++++++++++++++++++-- drivers/thunderbolt/tb.c | 4 ++-- drivers/thunderbolt/tb.h | 3 ++- drivers/thunderbolt/usb4.c | 13 +++++++------ 4 files changed, 36 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 4edfd6e34e31..326433df5880 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -3448,7 +3448,26 @@ static int tb_switch_set_wake(struct tb_switch *sw, unsigned int flags) return tb_lc_set_wake(sw, flags); } -int tb_switch_resume(struct tb_switch *sw) +static void tb_switch_check_wakes(struct tb_switch *sw) +{ + if (device_may_wakeup(&sw->dev)) { + if (tb_switch_is_usb4(sw)) + usb4_switch_check_wakes(sw); + } +} + +/** + * tb_switch_resume() - Resume a switch after sleep + * @sw: Switch to resume + * @runtime: Is this resume from runtime suspend or system sleep + * + * Resumes and re-enumerates router (and all its children), if still plugged + * after suspend. Don't enumerate device router whose UID was changed during + * suspend. If this is resume from system sleep, notifies PM core about the + * wakes occurred during suspend. Disables all wakes, except USB4 wake of + * upstream port for USB4 routers that shall be always enabled. + */ +int tb_switch_resume(struct tb_switch *sw, bool runtime) { struct tb_port *port; int err; @@ -3497,6 +3516,9 @@ int tb_switch_resume(struct tb_switch *sw) if (err) return err; + if (!runtime) + tb_switch_check_wakes(sw); + /* Disable wakes */ tb_switch_set_wake(sw, 0); @@ -3526,7 +3548,8 @@ int tb_switch_resume(struct tb_switch *sw) */ if (tb_port_unlock(port)) tb_port_warn(port, "failed to unlock port\n"); - if (port->remote && tb_switch_resume(port->remote->sw)) { + if (port->remote && + tb_switch_resume(port->remote->sw, runtime)) { tb_port_warn(port, "lost during suspend, disconnecting\n"); tb_sw_set_unplugged(port->remote->sw); diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index 360cb95f39aa..3e44c78ac409 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -2942,7 +2942,7 @@ static int tb_resume_noirq(struct tb *tb) if (!tb_switch_is_usb4(tb->root_switch)) tb_switch_reset(tb->root_switch); - tb_switch_resume(tb->root_switch); + tb_switch_resume(tb->root_switch, false); tb_free_invalid_tunnels(tb); tb_free_unplugged_children(tb->root_switch); tb_restore_children(tb->root_switch); @@ -3068,7 +3068,7 @@ static int tb_runtime_resume(struct tb *tb) struct tb_tunnel *tunnel, *n; mutex_lock(&tb->lock); - tb_switch_resume(tb->root_switch); + tb_switch_resume(tb->root_switch, true); tb_free_invalid_tunnels(tb); tb_restore_children(tb->root_switch); list_for_each_entry_safe(tunnel, n, &tcm->tunnel_list, list) diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index feed8ecaf712..18aae4ccaed5 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -827,7 +827,7 @@ int tb_switch_configuration_valid(struct tb_switch *sw); int tb_switch_add(struct tb_switch *sw); void tb_switch_remove(struct tb_switch *sw); void tb_switch_suspend(struct tb_switch *sw, bool runtime); -int tb_switch_resume(struct tb_switch *sw); +int tb_switch_resume(struct tb_switch *sw, bool runtime); int tb_switch_reset(struct tb_switch *sw); int tb_switch_wait_for_bit(struct tb_switch *sw, u32 offset, u32 bit, u32 value, int timeout_msec); @@ -1288,6 +1288,7 @@ static inline bool tb_switch_is_usb4(const struct tb_switch *sw) return usb4_switch_version(sw) > 0; } +void usb4_switch_check_wakes(struct tb_switch *sw); int usb4_switch_setup(struct tb_switch *sw); int usb4_switch_configuration_valid(struct tb_switch *sw); int usb4_switch_read_uid(struct tb_switch *sw, u64 *uid); diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 9860b49d7a2b..78b06e922fda 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -155,7 +155,13 @@ static inline int usb4_switch_op_data(struct tb_switch *sw, u16 opcode, tx_dwords, rx_data, rx_dwords); } -static void usb4_switch_check_wakes(struct tb_switch *sw) +/** + * usb4_switch_check_wakes() - Check for wakes and notify PM core about them + * @sw: Router whose wakes to check + * + * Checks wakes occurred during suspend and notify the PM core about them. + */ +void usb4_switch_check_wakes(struct tb_switch *sw) { bool wakeup_usb4 = false; struct usb4_port *usb4; @@ -163,9 +169,6 @@ static void usb4_switch_check_wakes(struct tb_switch *sw) bool wakeup = false; u32 val; - if (!device_may_wakeup(&sw->dev)) - return; - if (tb_route(sw)) { if (tb_sw_read(sw, &val, TB_CFG_SWITCH, ROUTER_CS_6, 1)) return; @@ -244,8 +247,6 @@ int usb4_switch_setup(struct tb_switch *sw) u32 val = 0; int ret; - usb4_switch_check_wakes(sw); - if (!tb_route(sw)) return 0; -- cgit v1.3.1 From 19fa4f2a85d777a8052e869c1b892a2f7556569d Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Mon, 8 Apr 2024 20:47:40 +0200 Subject: r8169: fix LED-related deadlock on module removal Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101") Cc: stable@vger.kernel.org Reported-by: Lukas Wunner Signed-off-by: Heiner Kallweit Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller --- drivers/net/ethernet/realtek/r8169.h | 6 ++++-- drivers/net/ethernet/realtek/r8169_leds.c | 35 ++++++++++++++++++++----------- drivers/net/ethernet/realtek/r8169_main.c | 8 +++++-- 3 files changed, 33 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169.h b/drivers/net/ethernet/realtek/r8169.h index 4c043052198d..00882ffc7a02 100644 --- a/drivers/net/ethernet/realtek/r8169.h +++ b/drivers/net/ethernet/realtek/r8169.h @@ -73,6 +73,7 @@ enum mac_version { }; struct rtl8169_private; +struct r8169_led_classdev; void r8169_apply_firmware(struct rtl8169_private *tp); u16 rtl8168h_2_get_adc_bias_ioffset(struct rtl8169_private *tp); @@ -84,7 +85,8 @@ void r8169_get_led_name(struct rtl8169_private *tp, int idx, char *buf, int buf_len); int rtl8168_get_led_mode(struct rtl8169_private *tp); int rtl8168_led_mod_ctrl(struct rtl8169_private *tp, u16 mask, u16 val); -void rtl8168_init_leds(struct net_device *ndev); +struct r8169_led_classdev *rtl8168_init_leds(struct net_device *ndev); int rtl8125_get_led_mode(struct rtl8169_private *tp, int index); int rtl8125_set_led_mode(struct rtl8169_private *tp, int index, u16 mode); -void rtl8125_init_leds(struct net_device *ndev); +struct r8169_led_classdev *rtl8125_init_leds(struct net_device *ndev); +void r8169_remove_leds(struct r8169_led_classdev *leds); diff --git a/drivers/net/ethernet/realtek/r8169_leds.c b/drivers/net/ethernet/realtek/r8169_leds.c index 7c5dc9d0df85..e10bee706bc6 100644 --- a/drivers/net/ethernet/realtek/r8169_leds.c +++ b/drivers/net/ethernet/realtek/r8169_leds.c @@ -146,22 +146,22 @@ static void rtl8168_setup_ldev(struct r8169_led_classdev *ldev, led_cdev->hw_control_get_device = r8169_led_hw_control_get_device; /* ignore errors */ - devm_led_classdev_register(&ndev->dev, led_cdev); + led_classdev_register(&ndev->dev, led_cdev); } -void rtl8168_init_leds(struct net_device *ndev) +struct r8169_led_classdev *rtl8168_init_leds(struct net_device *ndev) { - /* bind resource mgmt to netdev */ - struct device *dev = &ndev->dev; struct r8169_led_classdev *leds; int i; - leds = devm_kcalloc(dev, RTL8168_NUM_LEDS, sizeof(*leds), GFP_KERNEL); + leds = kcalloc(RTL8168_NUM_LEDS + 1, sizeof(*leds), GFP_KERNEL); if (!leds) - return; + return NULL; for (i = 0; i < RTL8168_NUM_LEDS; i++) rtl8168_setup_ldev(leds + i, ndev, i); + + return leds; } static int rtl8125_led_hw_control_is_supported(struct led_classdev *led_cdev, @@ -245,20 +245,31 @@ static void rtl8125_setup_led_ldev(struct r8169_led_classdev *ldev, led_cdev->hw_control_get_device = r8169_led_hw_control_get_device; /* ignore errors */ - devm_led_classdev_register(&ndev->dev, led_cdev); + led_classdev_register(&ndev->dev, led_cdev); } -void rtl8125_init_leds(struct net_device *ndev) +struct r8169_led_classdev *rtl8125_init_leds(struct net_device *ndev) { - /* bind resource mgmt to netdev */ - struct device *dev = &ndev->dev; struct r8169_led_classdev *leds; int i; - leds = devm_kcalloc(dev, RTL8125_NUM_LEDS, sizeof(*leds), GFP_KERNEL); + leds = kcalloc(RTL8125_NUM_LEDS + 1, sizeof(*leds), GFP_KERNEL); if (!leds) - return; + return NULL; for (i = 0; i < RTL8125_NUM_LEDS; i++) rtl8125_setup_led_ldev(leds + i, ndev, i); + + return leds; +} + +void r8169_remove_leds(struct r8169_led_classdev *leds) +{ + if (!leds) + return; + + for (struct r8169_led_classdev *l = leds; l->ndev; l++) + led_classdev_unregister(&l->led); + + kfree(leds); } diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 6f1e6f386b7b..8a27328eae34 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -647,6 +647,8 @@ struct rtl8169_private { const char *fw_name; struct rtl_fw *rtl_fw; + struct r8169_led_classdev *leds; + u32 ocp_base; }; @@ -5044,6 +5046,8 @@ static void rtl_remove_one(struct pci_dev *pdev) cancel_work_sync(&tp->wk.work); + r8169_remove_leds(tp->leds); + unregister_netdev(tp->dev); if (tp->dash_type != RTL_DASH_NONE) @@ -5501,9 +5505,9 @@ static int rtl_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (IS_ENABLED(CONFIG_R8169_LEDS)) { if (rtl_is_8125(tp)) - rtl8125_init_leds(dev); + tp->leds = rtl8125_init_leds(dev); else if (tp->mac_version > RTL_GIGA_MAC_VER_06) - rtl8168_init_leds(dev); + tp->leds = rtl8168_init_leds(dev); } netdev_info(dev, "%s, %pM, XID %03x, IRQ %d\n", -- cgit v1.3.1 From d9ea7a3f66a5c7e1a2f73cf4b20f5eff3ced4ff8 Mon Sep 17 00:00:00 2001 From: Li Zhijian Date: Tue, 19 Mar 2024 11:43:50 +0800 Subject: hv: vmbus: Convert sprintf() family to sysfs_emit() family Per filesystems/sysfs.rst, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Coccinelle complains that there are still a couple of functions that use snprintf(). Convert them to sysfs_emit(). sprintf() and scnprintf() will be converted as well if these files have such abused cases. This patch is generated by make coccicheck M= MODE=patch \ COCCI=scripts/coccinelle/api/device_attr_show.cocci No functional change intended. CC: "K. Y. Srinivasan" CC: Haiyang Zhang CC: Wei Liu CC: Dexuan Cui CC: linux-hyperv@vger.kernel.org Signed-off-by: Li Zhijian Link: https://lore.kernel.org/r/20240319034350.1574454-1-lizhijian@fujitsu.com Signed-off-by: Wei Liu Message-ID: <20240319034350.1574454-1-lizhijian@fujitsu.com> --- drivers/hv/vmbus_drv.c | 94 ++++++++++++++++++++++---------------------------- 1 file changed, 42 insertions(+), 52 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c index 7f7965f3d187..121f1ab32b51 100644 --- a/drivers/hv/vmbus_drv.c +++ b/drivers/hv/vmbus_drv.c @@ -131,7 +131,7 @@ static ssize_t id_show(struct device *dev, struct device_attribute *dev_attr, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", hv_dev->channel->offermsg.child_relid); + return sysfs_emit(buf, "%d\n", hv_dev->channel->offermsg.child_relid); } static DEVICE_ATTR_RO(id); @@ -142,7 +142,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *dev_attr, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", hv_dev->channel->state); + return sysfs_emit(buf, "%d\n", hv_dev->channel->state); } static DEVICE_ATTR_RO(state); @@ -153,7 +153,7 @@ static ssize_t monitor_id_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", hv_dev->channel->offermsg.monitorid); + return sysfs_emit(buf, "%d\n", hv_dev->channel->offermsg.monitorid); } static DEVICE_ATTR_RO(monitor_id); @@ -164,8 +164,8 @@ static ssize_t class_id_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "{%pUl}\n", - &hv_dev->channel->offermsg.offer.if_type); + return sysfs_emit(buf, "{%pUl}\n", + &hv_dev->channel->offermsg.offer.if_type); } static DEVICE_ATTR_RO(class_id); @@ -176,8 +176,8 @@ static ssize_t device_id_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "{%pUl}\n", - &hv_dev->channel->offermsg.offer.if_instance); + return sysfs_emit(buf, "{%pUl}\n", + &hv_dev->channel->offermsg.offer.if_instance); } static DEVICE_ATTR_RO(device_id); @@ -186,7 +186,7 @@ static ssize_t modalias_show(struct device *dev, { struct hv_device *hv_dev = device_to_hv_device(dev); - return sprintf(buf, "vmbus:%*phN\n", UUID_SIZE, &hv_dev->dev_type); + return sysfs_emit(buf, "vmbus:%*phN\n", UUID_SIZE, &hv_dev->dev_type); } static DEVICE_ATTR_RO(modalias); @@ -199,7 +199,7 @@ static ssize_t numa_node_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", cpu_to_node(hv_dev->channel->target_cpu)); + return sysfs_emit(buf, "%d\n", cpu_to_node(hv_dev->channel->target_cpu)); } static DEVICE_ATTR_RO(numa_node); #endif @@ -212,9 +212,8 @@ static ssize_t server_monitor_pending_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_pending(hv_dev->channel, - vmbus_connection.monitor_pages[0])); + return sysfs_emit(buf, "%d\n", channel_pending(hv_dev->channel, + vmbus_connection.monitor_pages[0])); } static DEVICE_ATTR_RO(server_monitor_pending); @@ -226,9 +225,8 @@ static ssize_t client_monitor_pending_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_pending(hv_dev->channel, - vmbus_connection.monitor_pages[1])); + return sysfs_emit(buf, "%d\n", channel_pending(hv_dev->channel, + vmbus_connection.monitor_pages[1])); } static DEVICE_ATTR_RO(client_monitor_pending); @@ -240,9 +238,8 @@ static ssize_t server_monitor_latency_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_latency(hv_dev->channel, - vmbus_connection.monitor_pages[0])); + return sysfs_emit(buf, "%d\n", channel_latency(hv_dev->channel, + vmbus_connection.monitor_pages[0])); } static DEVICE_ATTR_RO(server_monitor_latency); @@ -254,9 +251,8 @@ static ssize_t client_monitor_latency_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_latency(hv_dev->channel, - vmbus_connection.monitor_pages[1])); + return sysfs_emit(buf, "%d\n", channel_latency(hv_dev->channel, + vmbus_connection.monitor_pages[1])); } static DEVICE_ATTR_RO(client_monitor_latency); @@ -268,9 +264,8 @@ static ssize_t server_monitor_conn_id_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_conn_id(hv_dev->channel, - vmbus_connection.monitor_pages[0])); + return sysfs_emit(buf, "%d\n", channel_conn_id(hv_dev->channel, + vmbus_connection.monitor_pages[0])); } static DEVICE_ATTR_RO(server_monitor_conn_id); @@ -282,9 +277,8 @@ static ssize_t client_monitor_conn_id_show(struct device *dev, if (!hv_dev->channel) return -ENODEV; - return sprintf(buf, "%d\n", - channel_conn_id(hv_dev->channel, - vmbus_connection.monitor_pages[1])); + return sysfs_emit(buf, "%d\n", channel_conn_id(hv_dev->channel, + vmbus_connection.monitor_pages[1])); } static DEVICE_ATTR_RO(client_monitor_conn_id); @@ -303,7 +297,7 @@ static ssize_t out_intr_mask_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", outbound.current_interrupt_mask); + return sysfs_emit(buf, "%d\n", outbound.current_interrupt_mask); } static DEVICE_ATTR_RO(out_intr_mask); @@ -321,7 +315,7 @@ static ssize_t out_read_index_show(struct device *dev, &outbound); if (ret < 0) return ret; - return sprintf(buf, "%d\n", outbound.current_read_index); + return sysfs_emit(buf, "%d\n", outbound.current_read_index); } static DEVICE_ATTR_RO(out_read_index); @@ -340,7 +334,7 @@ static ssize_t out_write_index_show(struct device *dev, &outbound); if (ret < 0) return ret; - return sprintf(buf, "%d\n", outbound.current_write_index); + return sysfs_emit(buf, "%d\n", outbound.current_write_index); } static DEVICE_ATTR_RO(out_write_index); @@ -359,7 +353,7 @@ static ssize_t out_read_bytes_avail_show(struct device *dev, &outbound); if (ret < 0) return ret; - return sprintf(buf, "%d\n", outbound.bytes_avail_toread); + return sysfs_emit(buf, "%d\n", outbound.bytes_avail_toread); } static DEVICE_ATTR_RO(out_read_bytes_avail); @@ -378,7 +372,7 @@ static ssize_t out_write_bytes_avail_show(struct device *dev, &outbound); if (ret < 0) return ret; - return sprintf(buf, "%d\n", outbound.bytes_avail_towrite); + return sysfs_emit(buf, "%d\n", outbound.bytes_avail_towrite); } static DEVICE_ATTR_RO(out_write_bytes_avail); @@ -396,7 +390,7 @@ static ssize_t in_intr_mask_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", inbound.current_interrupt_mask); + return sysfs_emit(buf, "%d\n", inbound.current_interrupt_mask); } static DEVICE_ATTR_RO(in_intr_mask); @@ -414,7 +408,7 @@ static ssize_t in_read_index_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", inbound.current_read_index); + return sysfs_emit(buf, "%d\n", inbound.current_read_index); } static DEVICE_ATTR_RO(in_read_index); @@ -432,7 +426,7 @@ static ssize_t in_write_index_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", inbound.current_write_index); + return sysfs_emit(buf, "%d\n", inbound.current_write_index); } static DEVICE_ATTR_RO(in_write_index); @@ -451,7 +445,7 @@ static ssize_t in_read_bytes_avail_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", inbound.bytes_avail_toread); + return sysfs_emit(buf, "%d\n", inbound.bytes_avail_toread); } static DEVICE_ATTR_RO(in_read_bytes_avail); @@ -470,7 +464,7 @@ static ssize_t in_write_bytes_avail_show(struct device *dev, if (ret < 0) return ret; - return sprintf(buf, "%d\n", inbound.bytes_avail_towrite); + return sysfs_emit(buf, "%d\n", inbound.bytes_avail_towrite); } static DEVICE_ATTR_RO(in_write_bytes_avail); @@ -480,7 +474,7 @@ static ssize_t channel_vp_mapping_show(struct device *dev, { struct hv_device *hv_dev = device_to_hv_device(dev); struct vmbus_channel *channel = hv_dev->channel, *cur_sc; - int buf_size = PAGE_SIZE, n_written, tot_written; + int n_written; struct list_head *cur; if (!channel) @@ -488,25 +482,21 @@ static ssize_t channel_vp_mapping_show(struct device *dev, mutex_lock(&vmbus_connection.channel_mutex); - tot_written = snprintf(buf, buf_size, "%u:%u\n", - channel->offermsg.child_relid, channel->target_cpu); + n_written = sysfs_emit(buf, "%u:%u\n", + channel->offermsg.child_relid, + channel->target_cpu); list_for_each(cur, &channel->sc_list) { - if (tot_written >= buf_size - 1) - break; cur_sc = list_entry(cur, struct vmbus_channel, sc_list); - n_written = scnprintf(buf + tot_written, - buf_size - tot_written, - "%u:%u\n", - cur_sc->offermsg.child_relid, - cur_sc->target_cpu); - tot_written += n_written; + n_written += sysfs_emit_at(buf, n_written, "%u:%u\n", + cur_sc->offermsg.child_relid, + cur_sc->target_cpu); } mutex_unlock(&vmbus_connection.channel_mutex); - return tot_written; + return n_written; } static DEVICE_ATTR_RO(channel_vp_mapping); @@ -516,7 +506,7 @@ static ssize_t vendor_show(struct device *dev, { struct hv_device *hv_dev = device_to_hv_device(dev); - return sprintf(buf, "0x%x\n", hv_dev->vendor_id); + return sysfs_emit(buf, "0x%x\n", hv_dev->vendor_id); } static DEVICE_ATTR_RO(vendor); @@ -526,7 +516,7 @@ static ssize_t device_show(struct device *dev, { struct hv_device *hv_dev = device_to_hv_device(dev); - return sprintf(buf, "0x%x\n", hv_dev->device_id); + return sysfs_emit(buf, "0x%x\n", hv_dev->device_id); } static DEVICE_ATTR_RO(device); @@ -551,7 +541,7 @@ static ssize_t driver_override_show(struct device *dev, ssize_t len; device_lock(dev); - len = snprintf(buf, PAGE_SIZE, "%s\n", hv_dev->driver_override); + len = sysfs_emit(buf, "%s\n", hv_dev->driver_override); device_unlock(dev); return len; -- cgit v1.3.1 From 03f5a999adba062456c8c818a683beb1b498983a Mon Sep 17 00:00:00 2001 From: Rick Edgecombe Date: Mon, 11 Mar 2024 09:15:54 -0700 Subject: Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. Signed-off-by: Rick Edgecombe Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-2-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-2-mhklinux@outlook.com> --- drivers/hv/connection.c | 29 ++++++++++++++++++++++------- 1 file changed, 22 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/connection.c b/drivers/hv/connection.c index 3cabeeabb1ca..f001ae880e1d 100644 --- a/drivers/hv/connection.c +++ b/drivers/hv/connection.c @@ -237,8 +237,17 @@ int vmbus_connect(void) vmbus_connection.monitor_pages[0], 1); ret |= set_memory_decrypted((unsigned long) vmbus_connection.monitor_pages[1], 1); - if (ret) + if (ret) { + /* + * If set_memory_decrypted() fails, the encryption state + * of the memory is unknown. So leak the memory instead + * of risking returning decrypted memory to the free list. + * For simplicity, always handle both pages the same. + */ + vmbus_connection.monitor_pages[0] = NULL; + vmbus_connection.monitor_pages[1] = NULL; goto cleanup; + } /* * Set_memory_decrypted() will change the memory contents if @@ -337,13 +346,19 @@ void vmbus_disconnect(void) vmbus_connection.int_page = NULL; } - set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[0], 1); - set_memory_encrypted((unsigned long)vmbus_connection.monitor_pages[1], 1); + if (vmbus_connection.monitor_pages[0]) { + if (!set_memory_encrypted( + (unsigned long)vmbus_connection.monitor_pages[0], 1)) + hv_free_hyperv_page(vmbus_connection.monitor_pages[0]); + vmbus_connection.monitor_pages[0] = NULL; + } - hv_free_hyperv_page(vmbus_connection.monitor_pages[0]); - hv_free_hyperv_page(vmbus_connection.monitor_pages[1]); - vmbus_connection.monitor_pages[0] = NULL; - vmbus_connection.monitor_pages[1] = NULL; + if (vmbus_connection.monitor_pages[1]) { + if (!set_memory_encrypted( + (unsigned long)vmbus_connection.monitor_pages[1], 1)) + hv_free_hyperv_page(vmbus_connection.monitor_pages[1]); + vmbus_connection.monitor_pages[1] = NULL; + } } /* -- cgit v1.3.1 From 211f514ebf1ef5de37b1cf6df9d28a56cfd242ca Mon Sep 17 00:00:00 2001 From: Rick Edgecombe Date: Mon, 11 Mar 2024 09:15:55 -0700 Subject: Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. In order to make sure callers of vmbus_establish_gpadl() and vmbus_teardown_gpadl() don't return decrypted/shared pages to allocators, add a field in struct vmbus_gpadl to keep track of the decryption status of the buffers. This will allow the callers to know if they should free or leak the pages. Signed-off-by: Rick Edgecombe Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-3-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-3-mhklinux@outlook.com> --- drivers/hv/channel.c | 25 +++++++++++++++++++++---- include/linux/hyperv.h | 1 + 2 files changed, 22 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index adbf674355b2..98259b492502 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -436,9 +436,18 @@ static int __vmbus_establish_gpadl(struct vmbus_channel *channel, (atomic_inc_return(&vmbus_connection.next_gpadl_handle) - 1); ret = create_gpadl_header(type, kbuffer, size, send_offset, &msginfo); - if (ret) + if (ret) { + gpadl->decrypted = false; return ret; + } + /* + * Set the "decrypted" flag to true for the set_memory_decrypted() + * success case. In the failure case, the encryption state of the + * memory is unknown. Leave "decrypted" as true to ensure the + * memory will be leaked instead of going back on the free list. + */ + gpadl->decrypted = true; ret = set_memory_decrypted((unsigned long)kbuffer, PFN_UP(size)); if (ret) { @@ -527,9 +536,15 @@ cleanup: kfree(msginfo); - if (ret) - set_memory_encrypted((unsigned long)kbuffer, - PFN_UP(size)); + if (ret) { + /* + * If set_memory_encrypted() fails, the decrypted flag is + * left as true so the memory is leaked instead of being + * put back on the free list. + */ + if (!set_memory_encrypted((unsigned long)kbuffer, PFN_UP(size))) + gpadl->decrypted = false; + } return ret; } @@ -850,6 +865,8 @@ post_msg_err: if (ret) pr_warn("Fail to set mem host visibility in GPADL teardown %d.\n", ret); + gpadl->decrypted = ret; + return ret; } EXPORT_SYMBOL_GPL(vmbus_teardown_gpadl); diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index 6ef0557b4bff..96ceb4095425 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -832,6 +832,7 @@ struct vmbus_gpadl { u32 gpadl_handle; u32 size; void *buffer; + bool decrypted; }; struct vmbus_channel { -- cgit v1.3.1 From bbf9ac34677b57506a13682b31a2a718934c0e31 Mon Sep 17 00:00:00 2001 From: Rick Edgecombe Date: Mon, 11 Mar 2024 09:15:56 -0700 Subject: hv_netvsc: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The netvsc driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. Signed-off-by: Rick Edgecombe Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-4-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-4-mhklinux@outlook.com> --- drivers/net/hyperv/netvsc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/hyperv/netvsc.c b/drivers/net/hyperv/netvsc.c index a6fcbda64ecc..2b6ec979a62f 100644 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -154,8 +154,11 @@ static void free_netvsc_device(struct rcu_head *head) int i; kfree(nvdev->extension); - vfree(nvdev->recv_buf); - vfree(nvdev->send_buf); + + if (!nvdev->recv_buf_gpadl_handle.decrypted) + vfree(nvdev->recv_buf); + if (!nvdev->send_buf_gpadl_handle.decrypted) + vfree(nvdev->send_buf); bitmap_free(nvdev->send_section_map); for (i = 0; i < VRSS_CHANNEL_MAX; i++) { -- cgit v1.3.1 From 3d788b2fbe6a1a1a9e3db09742b90809d51638b7 Mon Sep 17 00:00:00 2001 From: Rick Edgecombe Date: Mon, 11 Mar 2024 09:15:57 -0700 Subject: uio_hv_generic: Don't free decrypted memory In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus device UIO driver could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the gpadl to decide whether to free the memory. Signed-off-by: Rick Edgecombe Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-5-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-5-mhklinux@outlook.com> --- drivers/uio/uio_hv_generic.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/uio/uio_hv_generic.c b/drivers/uio/uio_hv_generic.c index 20d9762331bd..6be3462b109f 100644 --- a/drivers/uio/uio_hv_generic.c +++ b/drivers/uio/uio_hv_generic.c @@ -181,12 +181,14 @@ hv_uio_cleanup(struct hv_device *dev, struct hv_uio_private_data *pdata) { if (pdata->send_gpadl.gpadl_handle) { vmbus_teardown_gpadl(dev->channel, &pdata->send_gpadl); - vfree(pdata->send_buf); + if (!pdata->send_gpadl.decrypted) + vfree(pdata->send_buf); } if (pdata->recv_gpadl.gpadl_handle) { vmbus_teardown_gpadl(dev->channel, &pdata->recv_gpadl); - vfree(pdata->recv_buf); + if (!pdata->recv_gpadl.decrypted) + vfree(pdata->recv_buf); } } @@ -295,7 +297,8 @@ hv_uio_probe(struct hv_device *dev, ret = vmbus_establish_gpadl(channel, pdata->recv_buf, RECV_BUFFER_SIZE, &pdata->recv_gpadl); if (ret) { - vfree(pdata->recv_buf); + if (!pdata->recv_gpadl.decrypted) + vfree(pdata->recv_buf); goto fail_close; } @@ -317,7 +320,8 @@ hv_uio_probe(struct hv_device *dev, ret = vmbus_establish_gpadl(channel, pdata->send_buf, SEND_BUFFER_SIZE, &pdata->send_gpadl); if (ret) { - vfree(pdata->send_buf); + if (!pdata->send_gpadl.decrypted) + vfree(pdata->send_buf); goto fail_close; } -- cgit v1.3.1 From 30d18df6567be09c1433e81993e35e3da573ac48 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Mon, 11 Mar 2024 09:15:58 -0700 Subject: Drivers: hv: vmbus: Don't free ring buffers that couldn't be re-encrypted In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. The VMBus ring buffer code could free decrypted/shared pages if set_memory_decrypted() fails. Check the decrypted field in the struct vmbus_gpadl for the ring buffers to decide whether to free the memory. Signed-off-by: Michael Kelley Reviewed-by: Kuppuswamy Sathyanarayanan Acked-by: Kirill A. Shutemov Link: https://lore.kernel.org/r/20240311161558.1310-6-mhklinux@outlook.com Signed-off-by: Wei Liu Message-ID: <20240311161558.1310-6-mhklinux@outlook.com> --- drivers/hv/channel.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/hv/channel.c b/drivers/hv/channel.c index 98259b492502..fb8cd8469328 100644 --- a/drivers/hv/channel.c +++ b/drivers/hv/channel.c @@ -153,7 +153,9 @@ void vmbus_free_ring(struct vmbus_channel *channel) hv_ringbuffer_cleanup(&channel->inbound); if (channel->ringbuffer_page) { - __free_pages(channel->ringbuffer_page, + /* In a CoCo VM leak the memory if it didn't get re-encrypted */ + if (!channel->ringbuffer_gpadlhandle.decrypted) + __free_pages(channel->ringbuffer_page, get_order(channel->ringbuffer_pagecount << PAGE_SHIFT)); channel->ringbuffer_page = NULL; -- cgit v1.3.1 From 06dfcd4098cfdc4d4577d94793a4f9125386da8b Mon Sep 17 00:00:00 2001 From: Arınç ÜNAL Date: Mon, 8 Apr 2024 10:08:53 +0300 Subject: net: dsa: mt7530: fix enabling EEE on MT7531 switch on all boards MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features") brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board (bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to SkyLake Huang (黃啟澤) from MediaTek for providing information on the internal EEE switch bit. There are existing boards that were not designed to pull the pin low. Because of that, the EEE status currently depends on the board design. The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually used to control an LED. Once the bit is unset, the pin will be low. That will make the active low LED turn on. The pin is controlled by the switch PHY. It seems that the PHY controls the pin in the way that it inverts the pin state. That means depending on the wiring of the LED connected to LAN2LED0 on the board, the LED may be on without an active link. To not cause this unwanted behaviour whilst enabling EEE on all boards, set the internal EEE switch bit on the CORE_PLL_GROUP4 register. My testing on MT7531 shows a certain amount of traffic loss when EEE is enabled. That said, I haven't come across a board that enables EEE. So enable EEE on the switch MACs but disable EEE advertisement on the switch PHYs. This way, we don't change the behaviour of the majority of the boards that have this switch. The mediatek-ge PHY driver already disables EEE advertisement on the switch PHYs but my testing shows that it is somehow enabled afterwards. Disabling EEE advertisement before the PHY driver initialises keeps it off. With this change, EEE can now be enabled using ethtool. Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features") Reviewed-by: Florian Fainelli Signed-off-by: Arınç ÜNAL Tested-by: Daniel Golle Reviewed-by: Daniel Golle Link: https://lore.kernel.org/r/20240408-for-net-mt7530-fix-eee-for-mt7531-mt7988-v3-1-84fdef1f008b@arinc9.com Signed-off-by: Jakub Kicinski --- drivers/net/dsa/mt7530.c | 17 ++++++++++++----- drivers/net/dsa/mt7530.h | 1 + 2 files changed, 13 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 1035820c2377..451ff0620c2e 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2505,18 +2505,25 @@ mt7531_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); - /* Enable PHY core PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we provide - * our own mt7531_ind_mmd_phy_[read,write] to complete this - * function. + /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since + * phy_device has not yet been created provided for + * phy_[read,write]_mmd_indirect is called, we provide our own + * mt7531_ind_mmd_phy_[read,write] to complete this function. */ val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, CORE_PLL_GROUP4); - val |= MT7531_PHY_PLL_BYPASS_MODE; + val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE; val &= ~MT7531_PHY_PLL_OFF; mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, CORE_PLL_GROUP4, val); + /* Disable EEE advertisement on the switch PHYs. */ + for (i = MT753X_CTRL_PHY_ADDR; + i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) { + mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV, + 0); + } + mt7531_setup_common(ds); /* Setup VLAN ID 0 for VLAN-unaware bridges */ diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index d17b318e6ee4..9439db495001 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -616,6 +616,7 @@ enum mt7531_clk_skew { #define RG_SYSPLL_DDSFBK_EN BIT(12) #define RG_SYSPLL_BIAS_EN BIT(11) #define RG_SYSPLL_BIAS_LPF_EN BIT(10) +#define MT7531_RG_SYSPLL_DMY2 BIT(6) #define MT7531_PHY_PLL_OFF BIT(5) #define MT7531_PHY_PLL_BYPASS_MODE BIT(4) -- cgit v1.3.1 From 5e700b384ec13f5bcac9855cb28fcc674f1d3593 Mon Sep 17 00:00:00 2001 From: Noah Loomans Date: Wed, 10 Apr 2024 20:26:19 +0200 Subject: platform/chrome: cros_ec_uart: properly fix race condition The cros_ec_uart_probe() function calls devm_serdev_device_open() before it calls serdev_device_set_client_ops(). This can trigger a NULL pointer dereference: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... Call Trace: ... ? ttyport_receive_buf A simplified version of crashing code is as follows: static inline size_t serdev_controller_receive_buf(struct serdev_controller *ctrl, const u8 *data, size_t count) { struct serdev_device *serdev = ctrl->serdev; if (!serdev || !serdev->ops->receive_buf) // CRASH! return 0; return serdev->ops->receive_buf(serdev, data, count); } It assumes that if SERPORT_ACTIVE is set and serdev exists, serdev->ops will also exist. This conflicts with the existing cros_ec_uart_probe() logic, as it first calls devm_serdev_device_open() (which sets SERPORT_ACTIVE), and only later sets serdev->ops via serdev_device_set_client_ops(). Commit 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") attempted to fix a similar race condition, but while doing so, made the window of error for this race condition to happen much wider. Attempt to fix the race condition again, making sure we fully setup before calling devm_serdev_device_open(). Fixes: 01f95d42b8f4 ("platform/chrome: cros_ec_uart: fix race condition") Cc: stable@vger.kernel.org Signed-off-by: Noah Loomans Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20240410182618.169042-2-noah@noahloomans.com Signed-off-by: Tzung-Bi Shih --- drivers/platform/chrome/cros_ec_uart.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c index 68d80559fddc..eb5eddeb73f7 100644 --- a/drivers/platform/chrome/cros_ec_uart.c +++ b/drivers/platform/chrome/cros_ec_uart.c @@ -263,12 +263,6 @@ static int cros_ec_uart_probe(struct serdev_device *serdev) if (!ec_dev) return -ENOMEM; - ret = devm_serdev_device_open(dev, serdev); - if (ret) { - dev_err(dev, "Unable to open UART device"); - return ret; - } - serdev_device_set_drvdata(serdev, ec_dev); init_waitqueue_head(&ec_uart->response.wait_queue); @@ -280,14 +274,6 @@ static int cros_ec_uart_probe(struct serdev_device *serdev) return ret; } - ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate); - if (ret < 0) { - dev_err(dev, "Failed to set up host baud rate (%d)", ret); - return ret; - } - - serdev_device_set_flow_control(serdev, ec_uart->flowcontrol); - /* Initialize ec_dev for cros_ec */ ec_dev->phys_name = dev_name(dev); ec_dev->dev = dev; @@ -301,6 +287,20 @@ static int cros_ec_uart_probe(struct serdev_device *serdev) serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops); + ret = devm_serdev_device_open(dev, serdev); + if (ret) { + dev_err(dev, "Unable to open UART device"); + return ret; + } + + ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate); + if (ret < 0) { + dev_err(dev, "Failed to set up host baud rate (%d)", ret); + return ret; + } + + serdev_device_set_flow_control(serdev, ec_uart->flowcontrol); + return cros_ec_register(ec_dev); } -- cgit v1.3.1 From 97e176fcbbf3c0f2bd410c9b241177c051f57176 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 10 Apr 2024 15:11:28 +0200 Subject: r8169: add missing conditional compiling for call to r8169_remove_leds Add missing dependency on CONFIG_R8169_LEDS. As-is a link error occurs if config option CONFIG_R8169_LEDS isn't enabled. Fixes: 19fa4f2a85d7 ("r8169: fix LED-related deadlock on module removal") Reported-by: Venkat Rao Bagalkote Signed-off-by: Heiner Kallweit Tested-By: Venkat Rao Bagalkote Link: https://lore.kernel.org/r/d080038c-eb6b-45ac-9237-b8c1cdd7870f@gmail.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/realtek/r8169_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/realtek/r8169_main.c b/drivers/net/ethernet/realtek/r8169_main.c index 8a27328eae34..0fc5fe564ae5 100644 --- a/drivers/net/ethernet/realtek/r8169_main.c +++ b/drivers/net/ethernet/realtek/r8169_main.c @@ -5046,7 +5046,8 @@ static void rtl_remove_one(struct pci_dev *pdev) cancel_work_sync(&tp->wk.work); - r8169_remove_leds(tp->leds); + if (IS_ENABLED(CONFIG_R8169_LEDS)) + r8169_remove_leds(tp->leds); unregister_netdev(tp->dev); -- cgit v1.3.1 From 0553e753ea9ee724acaf6b3dfc7354702af83567 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Tue, 9 Apr 2024 22:08:09 +0300 Subject: net/mlx5: E-switch, store eswitch pointer before registering devlink_param Next patch will move devlink register to be first. Therefore, whenever mlx5 will register a param, the user will be notified. In order to notify the user, devlink is using the get() callback of the param. Hence, resources that are being used by the get() callback must be set before the devlink param is registered. Therefore, store eswitch pointer inside mdev before registering the param. Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/eswitch.c | 9 +++------ drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 4 ++++ 2 files changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c index 3047d7015c52..1789800faaeb 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch.c @@ -1868,6 +1868,7 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev) if (err) goto abort; + dev->priv.eswitch = esw; err = esw_offloads_init(esw); if (err) goto reps_err; @@ -1892,11 +1893,6 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev) esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_BASIC; else esw->offloads.encap = DEVLINK_ESWITCH_ENCAP_MODE_NONE; - if (MLX5_ESWITCH_MANAGER(dev) && - mlx5_esw_vport_match_metadata_supported(esw)) - esw->flags |= MLX5_ESWITCH_VPORT_MATCH_METADATA; - - dev->priv.eswitch = esw; BLOCKING_INIT_NOTIFIER_HEAD(&esw->n_head); esw_info(dev, @@ -1908,6 +1904,7 @@ int mlx5_eswitch_init(struct mlx5_core_dev *dev) reps_err: mlx5_esw_vports_cleanup(esw); + dev->priv.eswitch = NULL; abort: if (esw->work_queue) destroy_workqueue(esw->work_queue); @@ -1926,7 +1923,6 @@ void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw) esw_info(esw->dev, "cleanup\n"); - esw->dev->priv.eswitch = NULL; destroy_workqueue(esw->work_queue); WARN_ON(refcount_read(&esw->qos.refcnt)); mutex_destroy(&esw->state_lock); @@ -1937,6 +1933,7 @@ void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw) mutex_destroy(&esw->offloads.encap_tbl_lock); mutex_destroy(&esw->offloads.decap_tbl_lock); esw_offloads_cleanup(esw); + esw->dev->priv.eswitch = NULL; mlx5_esw_vports_cleanup(esw); debugfs_remove_recursive(esw->debugfs_root); devl_params_unregister(priv_to_devlink(esw->dev), mlx5_eswitch_params, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index baaae628b0a0..e3cce110e52f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -2476,6 +2476,10 @@ int esw_offloads_init(struct mlx5_eswitch *esw) if (err) return err; + if (MLX5_ESWITCH_MANAGER(esw->dev) && + mlx5_esw_vport_match_metadata_supported(esw)) + esw->flags |= MLX5_ESWITCH_VPORT_MATCH_METADATA; + err = devl_params_register(priv_to_devlink(esw->dev), esw_devlink_params, ARRAY_SIZE(esw_devlink_params)); -- cgit v1.3.1 From c6e77aa9dd82bc18a89bf49418f8f7e961cfccc8 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Tue, 9 Apr 2024 22:08:10 +0300 Subject: net/mlx5: Register devlink first under devlink lock In case device is having a non fatal FW error during probe, the driver will report the error to user via devlink. This will trigger a WARN_ON, since mlx5 is calling devlink_register() last. In order to avoid the WARN_ON[1], change mlx5 to invoke devl_register() first under devlink lock. [1] WARNING: CPU: 5 PID: 227 at net/devlink/health.c:483 devlink_recover_notify.constprop.0+0xb8/0xc0 CPU: 5 PID: 227 Comm: kworker/u16:3 Not tainted 6.4.0-rc5_for_upstream_min_debug_2023_06_12_12_38 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Workqueue: mlx5_health0000:08:00.0 mlx5_fw_reporter_err_work [mlx5_core] RIP: 0010:devlink_recover_notify.constprop.0+0xb8/0xc0 Call Trace: ? __warn+0x79/0x120 ? devlink_recover_notify.constprop.0+0xb8/0xc0 ? report_bug+0x17c/0x190 ? handle_bug+0x3c/0x60 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? devlink_recover_notify.constprop.0+0xb8/0xc0 devlink_health_report+0x4a/0x1c0 mlx5_fw_reporter_err_work+0xa4/0xd0 [mlx5_core] process_one_work+0x1bb/0x3c0 ? process_one_work+0x3c0/0x3c0 worker_thread+0x4d/0x3c0 ? process_one_work+0x3c0/0x3c0 kthread+0xc6/0xf0 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 Fixes: cf530217408e ("devlink: Notify users when objects are accessible") Signed-off-by: Shay Drory Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 37 ++++++++++++---------- .../ethernet/mellanox/mlx5/core/sf/dev/driver.c | 1 - 2 files changed, 20 insertions(+), 18 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index c2593625c09a..59806553889e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1480,6 +1480,14 @@ int mlx5_init_one_devl_locked(struct mlx5_core_dev *dev) if (err) goto err_register; + err = mlx5_crdump_enable(dev); + if (err) + mlx5_core_err(dev, "mlx5_crdump_enable failed with error code %d\n", err); + + err = mlx5_hwmon_dev_register(dev); + if (err) + mlx5_core_err(dev, "mlx5_hwmon_dev_register failed with error code %d\n", err); + mutex_unlock(&dev->intf_state_mutex); return 0; @@ -1505,7 +1513,10 @@ int mlx5_init_one(struct mlx5_core_dev *dev) int err; devl_lock(devlink); + devl_register(devlink); err = mlx5_init_one_devl_locked(dev); + if (err) + devl_unregister(devlink); devl_unlock(devlink); return err; } @@ -1517,6 +1528,8 @@ void mlx5_uninit_one(struct mlx5_core_dev *dev) devl_lock(devlink); mutex_lock(&dev->intf_state_mutex); + mlx5_hwmon_dev_unregister(dev); + mlx5_crdump_disable(dev); mlx5_unregister_device(dev); if (!test_bit(MLX5_INTERFACE_STATE_UP, &dev->intf_state)) { @@ -1534,6 +1547,7 @@ void mlx5_uninit_one(struct mlx5_core_dev *dev) mlx5_function_teardown(dev, true); out: mutex_unlock(&dev->intf_state_mutex); + devl_unregister(devlink); devl_unlock(devlink); } @@ -1680,16 +1694,20 @@ int mlx5_init_one_light(struct mlx5_core_dev *dev) } devl_lock(devlink); + devl_register(devlink); + err = mlx5_devlink_params_register(priv_to_devlink(dev)); - devl_unlock(devlink); if (err) { mlx5_core_warn(dev, "mlx5_devlink_param_reg err = %d\n", err); goto query_hca_caps_err; } + devl_unlock(devlink); return 0; query_hca_caps_err: + devl_unregister(devlink); + devl_unlock(devlink); mlx5_function_disable(dev, true); out: dev->state = MLX5_DEVICE_STATE_INTERNAL_ERROR; @@ -1702,6 +1720,7 @@ void mlx5_uninit_one_light(struct mlx5_core_dev *dev) devl_lock(devlink); mlx5_devlink_params_unregister(priv_to_devlink(dev)); + devl_unregister(devlink); devl_unlock(devlink); if (dev->state != MLX5_DEVICE_STATE_UP) return; @@ -1943,16 +1962,7 @@ static int probe_one(struct pci_dev *pdev, const struct pci_device_id *id) goto err_init_one; } - err = mlx5_crdump_enable(dev); - if (err) - dev_err(&pdev->dev, "mlx5_crdump_enable failed with error code %d\n", err); - - err = mlx5_hwmon_dev_register(dev); - if (err) - mlx5_core_err(dev, "mlx5_hwmon_dev_register failed with error code %d\n", err); - pci_save_state(pdev); - devlink_register(devlink); return 0; err_init_one: @@ -1973,16 +1983,9 @@ static void remove_one(struct pci_dev *pdev) struct devlink *devlink = priv_to_devlink(dev); set_bit(MLX5_BREAK_FW_WAIT, &dev->intf_state); - /* mlx5_drain_fw_reset() and mlx5_drain_health_wq() are using - * devlink notify APIs. - * Hence, we must drain them before unregistering the devlink. - */ mlx5_drain_fw_reset(dev); mlx5_drain_health_wq(dev); - devlink_unregister(devlink); mlx5_sriov_disable(pdev, false); - mlx5_hwmon_dev_unregister(dev); - mlx5_crdump_disable(dev); mlx5_uninit_one(dev); mlx5_pci_close(dev); mlx5_mdev_uninit(dev); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c index bc863e1f062e..e3bf8c7e4baa 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c @@ -101,7 +101,6 @@ static void mlx5_sf_dev_remove(struct auxiliary_device *adev) devlink = priv_to_devlink(mdev); set_bit(MLX5_BREAK_FW_WAIT, &mdev->intf_state); mlx5_drain_health_wq(mdev); - devlink_unregister(devlink); if (mlx5_dev_is_lightweight(mdev)) mlx5_uninit_one_light(mdev); else -- cgit v1.3.1 From 9f7e8fbb91f8fa29548e2f6ab50c03b628c67ede Mon Sep 17 00:00:00 2001 From: Michael Liang Date: Tue, 9 Apr 2024 22:08:11 +0300 Subject: net/mlx5: offset comp irq index in name by one The mlx5 comp irq name scheme is changed a little bit between commit 3663ad34bc70 ("net/mlx5: Shift control IRQ to the last index") and commit 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation"). The index in the comp irq name used to start from 0 but now it starts from 1. There is nothing critical here, but it's harmless to change back to the old behavior, a.k.a starting from 0. Fixes: 3354822cde5a ("net/mlx5: Use dynamic msix vectors allocation") Reviewed-by: Mohamed Khalfella Reviewed-by: Yuanyuan Zhong Signed-off-by: Michael Liang Reviewed-by: Shay Drory Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c index 4dcf995cb1a2..6bac8ad70ba6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c @@ -19,6 +19,7 @@ #define MLX5_IRQ_CTRL_SF_MAX 8 /* min num of vectors for SFs to be enabled */ #define MLX5_IRQ_VEC_COMP_BASE_SF 2 +#define MLX5_IRQ_VEC_COMP_BASE 1 #define MLX5_EQ_SHARE_IRQ_MAX_COMP (8) #define MLX5_EQ_SHARE_IRQ_MAX_CTRL (UINT_MAX) @@ -246,6 +247,7 @@ static void irq_set_name(struct mlx5_irq_pool *pool, char *name, int vecidx) return; } + vecidx -= MLX5_IRQ_VEC_COMP_BASE; snprintf(name, MLX5_MAX_IRQ_NAME, "mlx5_comp%d", vecidx); } @@ -585,7 +587,7 @@ struct mlx5_irq *mlx5_irq_request_vector(struct mlx5_core_dev *dev, u16 cpu, struct mlx5_irq_table *table = mlx5_irq_table_get(dev); struct mlx5_irq_pool *pool = table->pcif_pool; struct irq_affinity_desc af_desc; - int offset = 1; + int offset = MLX5_IRQ_VEC_COMP_BASE; if (!pool->xa_num_irqs.max) offset = 0; -- cgit v1.3.1 From 7c6782ad4911cbee874e85630226ed389ff2e453 Mon Sep 17 00:00:00 2001 From: Cosmin Ratiu Date: Tue, 9 Apr 2024 22:08:12 +0300 Subject: net/mlx5: Properly link new fs rules into the tree Previously, add_rule_fg would only add newly created rules from the handle into the tree when they had a refcount of 1. On the other hand, create_flow_handle tries hard to find and reference already existing identical rules instead of creating new ones. These two behaviors can result in a situation where create_flow_handle 1) creates a new rule and references it, then 2) in a subsequent step during the same handle creation references it again, resulting in a rule with a refcount of 2 that is not linked into the tree, will have a NULL parent and root and will result in a crash when the flow group is deleted because del_sw_hw_rule, invoked on rule deletion, assumes node->parent is != NULL. This happened in the wild, due to another bug related to incorrect handling of duplicate pkt_reformat ids, which lead to the code in create_flow_handle incorrectly referencing a just-added rule in the same flow handle, resulting in the problem described above. Full details are at [1]. This patch changes add_rule_fg to add new rules without parents into the tree, properly initializing them and avoiding the crash. This makes it more consistent with how rules are added to an FTE in create_flow_handle. Fixes: 74491de93712 ("net/mlx5: Add multi dest support") Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Signed-off-by: Cosmin Ratiu Reviewed-by: Tariq Toukan Reviewed-by: Mark Bloch Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index e6bfa7e4f146..2a9421342a50 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1808,8 +1808,9 @@ static struct mlx5_flow_handle *add_rule_fg(struct mlx5_flow_group *fg, } trace_mlx5_fs_set_fte(fte, false); + /* Link newly added rules into the tree. */ for (i = 0; i < handle->num_rules; i++) { - if (refcount_read(&handle->rule[i]->node.refcount) == 1) { + if (!handle->rule[i]->node.parent) { tree_add_node(&handle->rule[i]->node, &fte->node); trace_mlx5_fs_add_rule(handle->rule[i]); } -- cgit v1.3.1 From 9eca93f4d5ab03905516a68683674d9c50ff95bd Mon Sep 17 00:00:00 2001 From: Cosmin Ratiu Date: Tue, 9 Apr 2024 22:08:13 +0300 Subject: net/mlx5: Correctly compare pkt reformat ids struct mlx5_pkt_reformat contains a naked union of a u32 id and a dr_action pointer which is used when the action is SW-managed (when pkt_reformat.owner is set to MLX5_FLOW_RESOURCE_OWNER_SW). Using id directly in that case is incorrect, as it maps to the least significant 32 bits of the 64-bit pointer in mlx5_fs_dr_action and not to the pkt reformat id allocated in firmware. For the purpose of comparing whether two rules are identical, interpreting the least significant 32 bits of the mlx5_fs_dr_action pointer as an id mostly works... until it breaks horribly and produces the outcome described in [1]. This patch fixes mlx5_flow_dests_cmp to correctly compare ids using mlx5_fs_dr_action_get_pkt_reformat_id for the SW-managed rules. Link: https://lore.kernel.org/netdev/ea5264d6-6b55-4449-a602-214c6f509c1e@163.com/T/#u [1] Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Cosmin Ratiu Reviewed-by: Mark Bloch Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/fs_core.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c index 2a9421342a50..cf085a478e3e 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c @@ -1664,6 +1664,16 @@ static int create_auto_flow_group(struct mlx5_flow_table *ft, return err; } +static bool mlx5_pkt_reformat_cmp(struct mlx5_pkt_reformat *p1, + struct mlx5_pkt_reformat *p2) +{ + return p1->owner == p2->owner && + (p1->owner == MLX5_FLOW_RESOURCE_OWNER_FW ? + p1->id == p2->id : + mlx5_fs_dr_action_get_pkt_reformat_id(p1) == + mlx5_fs_dr_action_get_pkt_reformat_id(p2)); +} + static bool mlx5_flow_dests_cmp(struct mlx5_flow_destination *d1, struct mlx5_flow_destination *d2) { @@ -1675,8 +1685,8 @@ static bool mlx5_flow_dests_cmp(struct mlx5_flow_destination *d1, ((d1->vport.flags & MLX5_FLOW_DEST_VPORT_VHCA_ID) ? (d1->vport.vhca_id == d2->vport.vhca_id) : true) && ((d1->vport.flags & MLX5_FLOW_DEST_VPORT_REFORMAT_ID) ? - (d1->vport.pkt_reformat->id == - d2->vport.pkt_reformat->id) : true)) || + mlx5_pkt_reformat_cmp(d1->vport.pkt_reformat, + d2->vport.pkt_reformat) : true)) || (d1->type == MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE && d1->ft == d2->ft) || (d1->type == MLX5_FLOW_DESTINATION_TYPE_TIR && -- cgit v1.3.1 From ee3572409f74a838154af74ce1e56e62c17786a8 Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Tue, 9 Apr 2024 22:08:14 +0300 Subject: net/mlx5e: RSS, Block changing channels number when RXFH is configured Changing the channels number after configuring the receive flow hash indirection table may affect the RSS table size. The previous configuration may no longer be compatible with the new receive flow hash indirection table. Block changing the channels number when RXFH is configured and changing the channels number requires resizing the RSS table size. Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Carolina Jubran Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index cc51ce16df14..93461b0c5703 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -451,6 +451,23 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, mutex_lock(&priv->state_lock); + /* If RXFH is configured, changing the channels number is allowed only if + * it does not require resizing the RSS table. This is because the previous + * configuration may no longer be compatible with the new RSS table. + */ + if (netif_is_rxfh_configured(priv->netdev)) { + int cur_rqt_size = mlx5e_rqt_size(priv->mdev, cur_params->num_channels); + int new_rqt_size = mlx5e_rqt_size(priv->mdev, count); + + if (new_rqt_size != cur_rqt_size) { + err = -EINVAL; + netdev_err(priv->netdev, + "%s: RXFH is configured, block changing channels number that affects RSS table size (new: %d, current: %d)\n", + __func__, new_rqt_size, cur_rqt_size); + goto out; + } + } + /* Don't allow changing the number of channels if HTB offload is active, * because the numeration of the QoS SQs will change, while per-queue * qdiscs are attached. -- cgit v1.3.1 From ecb829459a841198e142f72fadab56424ae96519 Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Tue, 9 Apr 2024 22:08:15 +0300 Subject: net/mlx5e: Fix mlx5e_priv_init() cleanup flow When mlx5e_priv_init() fails, the cleanup flow calls mlx5e_selq_cleanup which calls mlx5e_selq_apply() that assures that the `priv->state_lock` is held using lockdep_is_held(). Acquire the state_lock in mlx5e_selq_cleanup(). Kernel log: ============================= WARNING: suspicious RCU usage 6.8.0-rc3_net_next_841a9b5 #1 Not tainted ----------------------------- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c:124 suspicious rcu_dereference_protected() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by systemd-modules/293: #0: ffffffffa05067b0 (devices_rwsem){++++}-{3:3}, at: ib_register_client+0x109/0x1b0 [ib_core] #1: ffff8881096c65c0 (&device->client_data_rwsem){++++}-{3:3}, at: add_client_context+0x104/0x1c0 [ib_core] stack backtrace: CPU: 4 PID: 293 Comm: systemd-modules Not tainted 6.8.0-rc3_net_next_841a9b5 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x8a/0xa0 lockdep_rcu_suspicious+0x154/0x1a0 mlx5e_selq_apply+0x94/0xa0 [mlx5_core] mlx5e_selq_cleanup+0x3a/0x60 [mlx5_core] mlx5e_priv_init+0x2be/0x2f0 [mlx5_core] mlx5_rdma_setup_rn+0x7c/0x1a0 [mlx5_core] rdma_init_netdev+0x4e/0x80 [ib_core] ? mlx5_rdma_netdev_free+0x70/0x70 [mlx5_core] ipoib_intf_init+0x64/0x550 [ib_ipoib] ipoib_intf_alloc+0x4e/0xc0 [ib_ipoib] ipoib_add_one+0xb0/0x360 [ib_ipoib] add_client_context+0x112/0x1c0 [ib_core] ib_register_client+0x166/0x1b0 [ib_core] ? 0xffffffffa0573000 ipoib_init_module+0xeb/0x1a0 [ib_ipoib] do_one_initcall+0x61/0x250 do_init_module+0x8a/0x270 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x17d/0x230 __x64_sys_finit_module+0x61/0xb0 do_syscall_64+0x71/0x140 entry_SYSCALL_64_after_hwframe+0x46/0x4e Fixes: 8bf30be75069 ("net/mlx5e: Introduce select queue parameters") Signed-off-by: Carolina Jubran Reviewed-by: Tariq Toukan Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-8-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/selq.c | 2 ++ drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/selq.c b/drivers/net/ethernet/mellanox/mlx5/core/en/selq.c index f675b1926340..f66bbc846464 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/selq.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/selq.c @@ -57,6 +57,7 @@ int mlx5e_selq_init(struct mlx5e_selq *selq, struct mutex *state_lock) void mlx5e_selq_cleanup(struct mlx5e_selq *selq) { + mutex_lock(selq->state_lock); WARN_ON_ONCE(selq->is_prepared); kvfree(selq->standby); @@ -67,6 +68,7 @@ void mlx5e_selq_cleanup(struct mlx5e_selq *selq) kvfree(selq->standby); selq->standby = NULL; + mutex_unlock(selq->state_lock); } void mlx5e_selq_prepare_params(struct mlx5e_selq *selq, struct mlx5e_params *params) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index 91848eae4565..b375ef268671 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -5726,9 +5726,7 @@ void mlx5e_priv_cleanup(struct mlx5e_priv *priv) kfree(priv->tx_rates); kfree(priv->txq2sq); destroy_workqueue(priv->wq); - mutex_lock(&priv->state_lock); mlx5e_selq_cleanup(&priv->selq); - mutex_unlock(&priv->state_lock); free_cpumask_var(priv->scratchpad.cpumask); for (i = 0; i < priv->htb_max_qos_sqs; i++) -- cgit v1.3.1 From 2f436f1869771d46e1a9f85738d5a1a7c5653a4e Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Tue, 9 Apr 2024 22:08:16 +0300 Subject: net/mlx5e: HTB, Fix inconsistencies with QoS SQs number When creating a new HTB class while the interface is down, the variable that follows the number of QoS SQs (htb_max_qos_sqs) may not be consistent with the number of HTB classes. Previously, we compared these two values to ensure that the node_qid is lower than the number of QoS SQs, and we allocated stats for that SQ when they are equal. Change the check to compare the node_qid with the current number of leaf nodes and fix the checking conditions to ensure allocation of stats_list and stats for each node. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Carolina Jubran Reviewed-by: Tariq Toukan Reviewed-by: Dragos Tatulea Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-9-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/qos.c | 33 ++++++++++++------------ 1 file changed, 17 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c b/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c index e87e26f2c669..6743806b8480 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/qos.c @@ -83,24 +83,25 @@ int mlx5e_open_qos_sq(struct mlx5e_priv *priv, struct mlx5e_channels *chs, txq_ix = mlx5e_qid_from_qos(chs, node_qid); - WARN_ON(node_qid > priv->htb_max_qos_sqs); - if (node_qid == priv->htb_max_qos_sqs) { - struct mlx5e_sq_stats *stats, **stats_list = NULL; - - if (priv->htb_max_qos_sqs == 0) { - stats_list = kvcalloc(mlx5e_qos_max_leaf_nodes(priv->mdev), - sizeof(*stats_list), - GFP_KERNEL); - if (!stats_list) - return -ENOMEM; - } + WARN_ON(node_qid >= mlx5e_htb_cur_leaf_nodes(priv->htb)); + if (!priv->htb_qos_sq_stats) { + struct mlx5e_sq_stats **stats_list; + + stats_list = kvcalloc(mlx5e_qos_max_leaf_nodes(priv->mdev), + sizeof(*stats_list), GFP_KERNEL); + if (!stats_list) + return -ENOMEM; + + WRITE_ONCE(priv->htb_qos_sq_stats, stats_list); + } + + if (!priv->htb_qos_sq_stats[node_qid]) { + struct mlx5e_sq_stats *stats; + stats = kzalloc(sizeof(*stats), GFP_KERNEL); - if (!stats) { - kvfree(stats_list); + if (!stats) return -ENOMEM; - } - if (stats_list) - WRITE_ONCE(priv->htb_qos_sq_stats, stats_list); + WRITE_ONCE(priv->htb_qos_sq_stats[node_qid], stats); /* Order htb_max_qos_sqs increment after writing the array pointer. * Pairs with smp_load_acquire in en_stats.c. -- cgit v1.3.1 From 86b0ca5b118d3a0bae5e5645a13e66f8a4f6c525 Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Tue, 9 Apr 2024 22:08:17 +0300 Subject: net/mlx5e: Do not produce metadata freelist entries in Tx port ts WQE xmit Free Tx port timestamping metadata entries in the NAPI poll context and consume metadata enties in the WQE xmit path. Do not free a Tx port timestamping metadata entry in the WQE xmit path even in the error path to avoid a race between two metadata entry producers. Fixes: 3178308ad4ca ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs") Signed-off-by: Rahul Rameshbabu Reviewed-by: Tariq Toukan Signed-off-by: Saeed Mahameed Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-10-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h | 8 +++++++- drivers/net/ethernet/mellanox/mlx5/core/en_tx.c | 7 +++---- 2 files changed, 10 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h index 86f1854698b4..883c044852f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/ptp.h @@ -95,9 +95,15 @@ static inline void mlx5e_ptp_metadata_fifo_push(struct mlx5e_ptp_metadata_fifo * } static inline u8 +mlx5e_ptp_metadata_fifo_peek(struct mlx5e_ptp_metadata_fifo *fifo) +{ + return fifo->data[fifo->mask & fifo->cc]; +} + +static inline void mlx5e_ptp_metadata_fifo_pop(struct mlx5e_ptp_metadata_fifo *fifo) { - return fifo->data[fifo->mask & fifo->cc++]; + fifo->cc++; } static inline void diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c index 2fa076b23fbe..e21a3b4128ce 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tx.c @@ -398,6 +398,8 @@ mlx5e_txwqe_complete(struct mlx5e_txqsq *sq, struct sk_buff *skb, (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) { u8 metadata_index = be32_to_cpu(eseg->flow_table_metadata); + mlx5e_ptp_metadata_fifo_pop(&sq->ptpsq->metadata_freelist); + mlx5e_skb_cb_hwtstamp_init(skb); mlx5e_ptp_metadata_map_put(&sq->ptpsq->metadata_map, skb, metadata_index); @@ -496,9 +498,6 @@ mlx5e_sq_xmit_wqe(struct mlx5e_txqsq *sq, struct sk_buff *skb, err_drop: stats->dropped++; - if (unlikely(sq->ptpsq && (skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) - mlx5e_ptp_metadata_fifo_push(&sq->ptpsq->metadata_freelist, - be32_to_cpu(eseg->flow_table_metadata)); dev_kfree_skb_any(skb); mlx5e_tx_flush(sq); } @@ -657,7 +656,7 @@ static void mlx5e_cqe_ts_id_eseg(struct mlx5e_ptpsq *ptpsq, struct sk_buff *skb, { if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) eseg->flow_table_metadata = - cpu_to_be32(mlx5e_ptp_metadata_fifo_pop(&ptpsq->metadata_freelist)); + cpu_to_be32(mlx5e_ptp_metadata_fifo_peek(&ptpsq->metadata_freelist)); } static void mlx5e_txwqe_build_eseg(struct mlx5e_priv *priv, struct mlx5e_txqsq *sq, -- cgit v1.3.1 From 49e6c9387051716169ff6a6c5ddd4d9f358db2e9 Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Tue, 9 Apr 2024 22:08:18 +0300 Subject: net/mlx5e: RSS, Block XOR hash with over 128 channels When supporting more than 128 channels, the RQT size is calculated by multiplying the number of channels by 2 and rounding up to the nearest power of 2. The index of the RQT is derived from the RSS hash calculations. If XOR8 is used as the RSS hash function, there are only 256 possible hash results, and therefore, only 256 indexes can be reached in the RQT. Block setting the RSS hash function to XOR when the number of channels exceeds 128. Fixes: 74a8dadac17e ("net/mlx5e: Preparations for supporting larger number of channels") Signed-off-by: Carolina Jubran Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240409190820.227554-11-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/rqt.c | 7 ++++++ drivers/net/ethernet/mellanox/mlx5/core/en/rqt.h | 1 + .../net/ethernet/mellanox/mlx5/core/en_ethtool.c | 28 ++++++++++++++++++++-- 3 files changed, 34 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.c b/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.c index bcafb4bf9415..8d9a3b5ec973 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.c @@ -179,6 +179,13 @@ u32 mlx5e_rqt_size(struct mlx5_core_dev *mdev, unsigned int num_channels) return min_t(u32, rqt_size, max_cap_rqt_size); } +#define MLX5E_MAX_RQT_SIZE_ALLOWED_WITH_XOR8_HASH 256 + +unsigned int mlx5e_rqt_max_num_channels_allowed_for_xor8(void) +{ + return MLX5E_MAX_RQT_SIZE_ALLOWED_WITH_XOR8_HASH / MLX5E_UNIFORM_SPREAD_RQT_FACTOR; +} + void mlx5e_rqt_destroy(struct mlx5e_rqt *rqt) { mlx5_core_destroy_rqt(rqt->mdev, rqt->rqtn); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.h b/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.h index e0bc30308c77..2f9e04a8418f 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/rqt.h @@ -38,6 +38,7 @@ static inline u32 mlx5e_rqt_get_rqtn(struct mlx5e_rqt *rqt) } u32 mlx5e_rqt_size(struct mlx5_core_dev *mdev, unsigned int num_channels); +unsigned int mlx5e_rqt_max_num_channels_allowed_for_xor8(void); int mlx5e_rqt_redirect_direct(struct mlx5e_rqt *rqt, u32 rqn, u32 *vhca_id); int mlx5e_rqt_redirect_indir(struct mlx5e_rqt *rqt, u32 *rqns, u32 *vhca_ids, unsigned int num_rqns, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 93461b0c5703..8f101181648c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -451,6 +451,17 @@ int mlx5e_ethtool_set_channels(struct mlx5e_priv *priv, mutex_lock(&priv->state_lock); + if (mlx5e_rx_res_get_current_hash(priv->rx_res).hfunc == ETH_RSS_HASH_XOR) { + unsigned int xor8_max_channels = mlx5e_rqt_max_num_channels_allowed_for_xor8(); + + if (count > xor8_max_channels) { + err = -EINVAL; + netdev_err(priv->netdev, "%s: Requested number of channels (%d) exceeds the maximum allowed by the XOR8 RSS hfunc (%d)\n", + __func__, count, xor8_max_channels); + goto out; + } + } + /* If RXFH is configured, changing the channels number is allowed only if * it does not require resizing the RSS table. This is because the previous * configuration may no longer be compatible with the new RSS table. @@ -1298,17 +1309,30 @@ int mlx5e_set_rxfh(struct net_device *dev, struct ethtool_rxfh_param *rxfh, struct mlx5e_priv *priv = netdev_priv(dev); u32 *rss_context = &rxfh->rss_context; u8 hfunc = rxfh->hfunc; + unsigned int count; int err; mutex_lock(&priv->state_lock); + + count = priv->channels.params.num_channels; + + if (hfunc == ETH_RSS_HASH_XOR) { + unsigned int xor8_max_channels = mlx5e_rqt_max_num_channels_allowed_for_xor8(); + + if (count > xor8_max_channels) { + err = -EINVAL; + netdev_err(priv->netdev, "%s: Cannot set RSS hash function to XOR, current number of channels (%d) exceeds the maximum allowed for XOR8 RSS hfunc (%d)\n", + __func__, count, xor8_max_channels); + goto unlock; + } + } + if (*rss_context && rxfh->rss_delete) { err = mlx5e_rx_res_rss_destroy(priv->rx_res, *rss_context); goto unlock; } if (*rss_context == ETH_RXFH_CONTEXT_ALLOC) { - unsigned int count = priv->channels.params.num_channels; - err = mlx5e_rx_res_rss_init(priv->rx_res, rss_context, count); if (err) goto unlock; -- cgit v1.3.1 From 7772dc7460e8ef359f3eee88c3b708cb403e19af Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Tue, 9 Apr 2024 22:08:19 +0300 Subject: net/mlx5: Disallow SRIOV switchdev mode when in multi-PF netdev Adaptations need to be made for the auxiliary device management in the core driver level. Block this combination for now. Fixes: 678eb448055a ("net/mlx5: SD, Implement basic query and instantiation") Signed-off-by: Tariq Toukan Reviewed-by: Dragos Tatulea Reviewed-by: Gal Pressman Link: https://lore.kernel.org/r/20240409190820.227554-12-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index e3cce110e52f..1f60954c12f7 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -43,6 +43,7 @@ #include "rdma.h" #include "en.h" #include "fs_core.h" +#include "lib/mlx5.h" #include "lib/devcom.h" #include "lib/eq.h" #include "lib/fs_chains.h" @@ -3711,6 +3712,12 @@ int mlx5_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode, if (esw_mode_from_devlink(mode, &mlx5_mode)) return -EINVAL; + if (mode == DEVLINK_ESWITCH_MODE_SWITCHDEV && mlx5_get_sd(esw->dev)) { + NL_SET_ERR_MSG_MOD(extack, + "Can't change E-Switch mode to switchdev when multi-PF netdev (Socket Direct) is configured."); + return -EPERM; + } + mlx5_lag_disable_change(esw->dev); err = mlx5_esw_try_lock(esw); if (err < 0) { -- cgit v1.3.1 From fe87922cee6161f066f4b9dd542033e048eeedaf Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Apr 2024 09:41:10 +0200 Subject: net/mlx5: fix possible stack overflows A couple of debug functions use a 512 byte temporary buffer and call another function that has another buffer of the same size, which in turn exceeds the usual warning limit for excessive stack usage: drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1073:1: error: stack frame size (1448) exceeds limit (1024) in 'dr_dump_start' [-Werror,-Wframe-larger-than] dr_dump_start(struct seq_file *file, loff_t *pos) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:1009:1: error: stack frame size (1120) exceeds limit (1024) in 'dr_dump_domain' [-Werror,-Wframe-larger-than] dr_dump_domain(struct seq_file *file, struct mlx5dr_domain *dmn) drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c:705:1: error: stack frame size (1104) exceeds limit (1024) in 'dr_dump_matcher_rx_tx' [-Werror,-Wframe-larger-than] dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, Rework these so that each of the various code paths only ever has one of these buffers in it, and exactly the functions that declare one have the 'noinline_for_stack' annotation that prevents them from all being inlined into the same caller. Fixes: 917d1e799ddf ("net/mlx5: DR, Change SWS usage to debug fs seq_file interface") Reviewed-by: Simon Horman Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/all/20240219100506.648089-1-arnd@kernel.org/ Signed-off-by: Arnd Bergmann Acked-by: Tariq Toukan Link: https://lore.kernel.org/r/20240408074142.3007036-1-arnd@kernel.org Signed-off-by: Jakub Kicinski --- .../ethernet/mellanox/mlx5/core/steering/dr_dbg.c | 82 +++++++++++----------- 1 file changed, 41 insertions(+), 41 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c index 64f4cc284aea..030a5776c937 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/dr_dbg.c @@ -205,12 +205,11 @@ dr_dump_hex_print(char hex[DR_HEX_SIZE], char *src, u32 size) } static int -dr_dump_rule_action_mem(struct seq_file *file, const u64 rule_id, +dr_dump_rule_action_mem(struct seq_file *file, char *buff, const u64 rule_id, struct mlx5dr_rule_action_member *action_mem) { struct mlx5dr_action *action = action_mem->action; const u64 action_id = DR_DBG_PTR_TO_ID(action); - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; u64 hit_tbl_ptr, miss_tbl_ptr; u32 hit_tbl_id, miss_tbl_id; int ret; @@ -488,10 +487,9 @@ dr_dump_rule_action_mem(struct seq_file *file, const u64 rule_id, } static int -dr_dump_rule_mem(struct seq_file *file, struct mlx5dr_ste *ste, +dr_dump_rule_mem(struct seq_file *file, char *buff, struct mlx5dr_ste *ste, bool is_rx, const u64 rule_id, u8 format_ver) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; char hw_ste_dump[DR_HEX_SIZE]; u32 mem_rec_type; int ret; @@ -522,7 +520,8 @@ dr_dump_rule_mem(struct seq_file *file, struct mlx5dr_ste *ste, } static int -dr_dump_rule_rx_tx(struct seq_file *file, struct mlx5dr_rule_rx_tx *rule_rx_tx, +dr_dump_rule_rx_tx(struct seq_file *file, char *buff, + struct mlx5dr_rule_rx_tx *rule_rx_tx, bool is_rx, const u64 rule_id, u8 format_ver) { struct mlx5dr_ste *ste_arr[DR_RULE_MAX_STES + DR_ACTION_MAX_STES]; @@ -533,7 +532,7 @@ dr_dump_rule_rx_tx(struct seq_file *file, struct mlx5dr_rule_rx_tx *rule_rx_tx, return 0; while (i--) { - ret = dr_dump_rule_mem(file, ste_arr[i], is_rx, rule_id, + ret = dr_dump_rule_mem(file, buff, ste_arr[i], is_rx, rule_id, format_ver); if (ret < 0) return ret; @@ -542,7 +541,8 @@ dr_dump_rule_rx_tx(struct seq_file *file, struct mlx5dr_rule_rx_tx *rule_rx_tx, return 0; } -static int dr_dump_rule(struct seq_file *file, struct mlx5dr_rule *rule) +static noinline_for_stack int +dr_dump_rule(struct seq_file *file, struct mlx5dr_rule *rule) { struct mlx5dr_rule_action_member *action_mem; const u64 rule_id = DR_DBG_PTR_TO_ID(rule); @@ -565,19 +565,19 @@ static int dr_dump_rule(struct seq_file *file, struct mlx5dr_rule *rule) return ret; if (rx->nic_matcher) { - ret = dr_dump_rule_rx_tx(file, rx, true, rule_id, format_ver); + ret = dr_dump_rule_rx_tx(file, buff, rx, true, rule_id, format_ver); if (ret < 0) return ret; } if (tx->nic_matcher) { - ret = dr_dump_rule_rx_tx(file, tx, false, rule_id, format_ver); + ret = dr_dump_rule_rx_tx(file, buff, tx, false, rule_id, format_ver); if (ret < 0) return ret; } list_for_each_entry(action_mem, &rule->rule_actions_list, list) { - ret = dr_dump_rule_action_mem(file, rule_id, action_mem); + ret = dr_dump_rule_action_mem(file, buff, rule_id, action_mem); if (ret < 0) return ret; } @@ -586,10 +586,10 @@ static int dr_dump_rule(struct seq_file *file, struct mlx5dr_rule *rule) } static int -dr_dump_matcher_mask(struct seq_file *file, struct mlx5dr_match_param *mask, +dr_dump_matcher_mask(struct seq_file *file, char *buff, + struct mlx5dr_match_param *mask, u8 criteria, const u64 matcher_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; char dump[DR_HEX_SIZE]; int ret; @@ -681,10 +681,10 @@ dr_dump_matcher_mask(struct seq_file *file, struct mlx5dr_match_param *mask, } static int -dr_dump_matcher_builder(struct seq_file *file, struct mlx5dr_ste_build *builder, +dr_dump_matcher_builder(struct seq_file *file, char *buff, + struct mlx5dr_ste_build *builder, u32 index, bool is_rx, const u64 matcher_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; int ret; ret = snprintf(buff, MLX5DR_DEBUG_DUMP_BUFF_LENGTH, @@ -702,11 +702,10 @@ dr_dump_matcher_builder(struct seq_file *file, struct mlx5dr_ste_build *builder, } static int -dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, +dr_dump_matcher_rx_tx(struct seq_file *file, char *buff, bool is_rx, struct mlx5dr_matcher_rx_tx *matcher_rx_tx, const u64 matcher_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; enum dr_dump_rec_type rec_type; u64 s_icm_addr, e_icm_addr; int i, ret; @@ -731,7 +730,7 @@ dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, return ret; for (i = 0; i < matcher_rx_tx->num_of_builders; i++) { - ret = dr_dump_matcher_builder(file, + ret = dr_dump_matcher_builder(file, buff, &matcher_rx_tx->ste_builder[i], i, is_rx, matcher_id); if (ret < 0) @@ -741,7 +740,7 @@ dr_dump_matcher_rx_tx(struct seq_file *file, bool is_rx, return 0; } -static int +static noinline_for_stack int dr_dump_matcher(struct seq_file *file, struct mlx5dr_matcher *matcher) { struct mlx5dr_matcher_rx_tx *rx = &matcher->rx; @@ -763,19 +762,19 @@ dr_dump_matcher(struct seq_file *file, struct mlx5dr_matcher *matcher) if (ret) return ret; - ret = dr_dump_matcher_mask(file, &matcher->mask, + ret = dr_dump_matcher_mask(file, buff, &matcher->mask, matcher->match_criteria, matcher_id); if (ret < 0) return ret; if (rx->nic_tbl) { - ret = dr_dump_matcher_rx_tx(file, true, rx, matcher_id); + ret = dr_dump_matcher_rx_tx(file, buff, true, rx, matcher_id); if (ret < 0) return ret; } if (tx->nic_tbl) { - ret = dr_dump_matcher_rx_tx(file, false, tx, matcher_id); + ret = dr_dump_matcher_rx_tx(file, buff, false, tx, matcher_id); if (ret < 0) return ret; } @@ -803,11 +802,10 @@ dr_dump_matcher_all(struct seq_file *file, struct mlx5dr_matcher *matcher) } static int -dr_dump_table_rx_tx(struct seq_file *file, bool is_rx, +dr_dump_table_rx_tx(struct seq_file *file, char *buff, bool is_rx, struct mlx5dr_table_rx_tx *table_rx_tx, const u64 table_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; enum dr_dump_rec_type rec_type; u64 s_icm_addr; int ret; @@ -829,7 +827,8 @@ dr_dump_table_rx_tx(struct seq_file *file, bool is_rx, return 0; } -static int dr_dump_table(struct seq_file *file, struct mlx5dr_table *table) +static noinline_for_stack int +dr_dump_table(struct seq_file *file, struct mlx5dr_table *table) { struct mlx5dr_table_rx_tx *rx = &table->rx; struct mlx5dr_table_rx_tx *tx = &table->tx; @@ -848,14 +847,14 @@ static int dr_dump_table(struct seq_file *file, struct mlx5dr_table *table) return ret; if (rx->nic_dmn) { - ret = dr_dump_table_rx_tx(file, true, rx, + ret = dr_dump_table_rx_tx(file, buff, true, rx, DR_DBG_PTR_TO_ID(table)); if (ret < 0) return ret; } if (tx->nic_dmn) { - ret = dr_dump_table_rx_tx(file, false, tx, + ret = dr_dump_table_rx_tx(file, buff, false, tx, DR_DBG_PTR_TO_ID(table)); if (ret < 0) return ret; @@ -881,10 +880,10 @@ static int dr_dump_table_all(struct seq_file *file, struct mlx5dr_table *tbl) } static int -dr_dump_send_ring(struct seq_file *file, struct mlx5dr_send_ring *ring, +dr_dump_send_ring(struct seq_file *file, char *buff, + struct mlx5dr_send_ring *ring, const u64 domain_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; int ret; ret = snprintf(buff, MLX5DR_DEBUG_DUMP_BUFF_LENGTH, @@ -902,13 +901,13 @@ dr_dump_send_ring(struct seq_file *file, struct mlx5dr_send_ring *ring, return 0; } -static noinline_for_stack int +static int dr_dump_domain_info_flex_parser(struct seq_file *file, + char *buff, const char *flex_parser_name, const u8 flex_parser_value, const u64 domain_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; int ret; ret = snprintf(buff, MLX5DR_DEBUG_DUMP_BUFF_LENGTH, @@ -925,11 +924,11 @@ dr_dump_domain_info_flex_parser(struct seq_file *file, return 0; } -static noinline_for_stack int -dr_dump_domain_info_caps(struct seq_file *file, struct mlx5dr_cmd_caps *caps, +static int +dr_dump_domain_info_caps(struct seq_file *file, char *buff, + struct mlx5dr_cmd_caps *caps, const u64 domain_id) { - char buff[MLX5DR_DEBUG_DUMP_BUFF_LENGTH]; struct mlx5dr_cmd_vport_cap *vport_caps; unsigned long i, vports_num; int ret; @@ -969,34 +968,35 @@ dr_dump_domain_info_caps(struct seq_file *file, struct mlx5dr_cmd_caps *caps, } static int -dr_dump_domain_info(struct seq_file *file, struct mlx5dr_domain_info *info, +dr_dump_domain_info(struct seq_file *file, char *buff, + struct mlx5dr_domain_info *info, const u64 domain_id) { int ret; - ret = dr_dump_domain_info_caps(file, &info->caps, domain_id); + ret = dr_dump_domain_info_caps(file, buff, &info->caps, domain_id); if (ret < 0) return ret; - ret = dr_dump_domain_info_flex_parser(file, "icmp_dw0", + ret = dr_dump_domain_info_flex_parser(file, buff, "icmp_dw0", info->caps.flex_parser_id_icmp_dw0, domain_id); if (ret < 0) return ret; - ret = dr_dump_domain_info_flex_parser(file, "icmp_dw1", + ret = dr_dump_domain_info_flex_parser(file, buff, "icmp_dw1", info->caps.flex_parser_id_icmp_dw1, domain_id); if (ret < 0) return ret; - ret = dr_dump_domain_info_flex_parser(file, "icmpv6_dw0", + ret = dr_dump_domain_info_flex_parser(file, buff, "icmpv6_dw0", info->caps.flex_parser_id_icmpv6_dw0, domain_id); if (ret < 0) return ret; - ret = dr_dump_domain_info_flex_parser(file, "icmpv6_dw1", + ret = dr_dump_domain_info_flex_parser(file, buff, "icmpv6_dw1", info->caps.flex_parser_id_icmpv6_dw1, domain_id); if (ret < 0) @@ -1032,12 +1032,12 @@ dr_dump_domain(struct seq_file *file, struct mlx5dr_domain *dmn) if (ret) return ret; - ret = dr_dump_domain_info(file, &dmn->info, domain_id); + ret = dr_dump_domain_info(file, buff, &dmn->info, domain_id); if (ret < 0) return ret; if (dmn->info.supp_sw_steering) { - ret = dr_dump_send_ring(file, dmn->send_ring, domain_id); + ret = dr_dump_send_ring(file, buff, dmn->send_ring, domain_id); if (ret < 0) return ret; } -- cgit v1.3.1 From 2f7b1d8b5505efb0057cd1ab85fca206063ea4c3 Mon Sep 17 00:00:00 2001 From: Pin-yen Lin Date: Tue, 12 Mar 2024 19:51:55 +0800 Subject: clk: mediatek: Do a runtime PM get on controllers during probe mt8183-mfgcfg has a mutual dependency with genpd during the probing stage, which leads to a deadlock in the following call stack: CPU0: genpd_lock --> clk_prepare_lock genpd_power_off_work_fn() genpd_lock() generic_pm_domain::power_off() clk_unprepare() clk_prepare_lock() CPU1: clk_prepare_lock --> genpd_lock clk_register() __clk_core_init() clk_prepare_lock() clk_pm_runtime_get() genpd_lock() Do a runtime PM get at the probe function to make sure clk_register() won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg, do this on all mediatek clock controller probings because we don't believe this would cause any regression. Verified on MT8183 and MT8192 Chromebooks. Fixes: acddfc2c261b ("clk: mediatek: Add MT8183 clock support") Signed-off-by: Pin-yen Lin Link: https://lore.kernel.org/r/20240312115249.3341654-1-treapking@chromium.org Reviewed-by: AngeloGioacchino Del Regno Tested-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/clk-mtk.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'drivers') diff --git a/drivers/clk/mediatek/clk-mtk.c b/drivers/clk/mediatek/clk-mtk.c index 2e55368dc4d8..bd37ab4d1a9b 100644 --- a/drivers/clk/mediatek/clk-mtk.c +++ b/drivers/clk/mediatek/clk-mtk.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include "clk-mtk.h" @@ -494,6 +495,16 @@ static int __mtk_clk_simple_probe(struct platform_device *pdev, return IS_ERR(base) ? PTR_ERR(base) : -ENOMEM; } + + devm_pm_runtime_enable(&pdev->dev); + /* + * Do a pm_runtime_resume_and_get() to workaround a possible + * deadlock between clk_register() and the genpd framework. + */ + r = pm_runtime_resume_and_get(&pdev->dev); + if (r) + return r; + /* Calculate how many clk_hw_onecell_data entries to allocate */ num_clks = mcd->num_clks + mcd->num_composite_clks; num_clks += mcd->num_fixed_clks + mcd->num_factor_clks; @@ -574,6 +585,8 @@ static int __mtk_clk_simple_probe(struct platform_device *pdev, goto unregister_clks; } + pm_runtime_put(&pdev->dev); + return r; unregister_clks: @@ -604,6 +617,8 @@ free_data: free_base: if (mcd->shared_io && base) iounmap(base); + + pm_runtime_put(&pdev->dev); return r; } -- cgit v1.3.1 From d3e8a91a848a5941e3c31ecebd6b2612b37e01a6 Mon Sep 17 00:00:00 2001 From: Daniel Golle Date: Wed, 13 Mar 2024 22:05:37 +0000 Subject: clk: mediatek: mt7988-infracfg: fix clocks for 2nd PCIe port Due to what seems to be an undocumented oddity in MediaTek's MT7988 SoC design the CLK_INFRA_PCIE_PERI_26M_CK_P2 clock requires CLK_INFRA_PCIE_PERI_26M_CK_P3 to be enabled. This currently leads to PCIe port 2 not working in Linux. Reflect the apparent relationship in the clk driver to make sure PCIe port 2 of the MT7988 SoC works. Fixes: 4b4719437d85f ("clk: mediatek: add drivers for MT7988 SoC") Suggested-by: Sam Shih Signed-off-by: Daniel Golle Link: https://lore.kernel.org/r/1da2506a51f970706bf4ec9509dd04e0471065e5.1710367453.git.daniel@makrotopia.org Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Stephen Boyd --- drivers/clk/mediatek/clk-mt7988-infracfg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/clk/mediatek/clk-mt7988-infracfg.c b/drivers/clk/mediatek/clk-mt7988-infracfg.c index 449041f8abbc..c8c023afe3e5 100644 --- a/drivers/clk/mediatek/clk-mt7988-infracfg.c +++ b/drivers/clk/mediatek/clk-mt7988-infracfg.c @@ -156,7 +156,7 @@ static const struct mtk_gate infra_clks[] = { GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P1, "infra_pcie_peri_ck_26m_ck_p1", "csw_infra_f26m_sel", 8), GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P2, "infra_pcie_peri_ck_26m_ck_p2", - "csw_infra_f26m_sel", 9), + "infra_pcie_peri_ck_26m_ck_p3", 9), GATE_INFRA0(CLK_INFRA_PCIE_PERI_26M_CK_P3, "infra_pcie_peri_ck_26m_ck_p3", "csw_infra_f26m_sel", 10), /* INFRA1 */ -- cgit v1.3.1 From 33623113a48ea906f1955cbf71094f6aa4462e8f Mon Sep 17 00:00:00 2001 From: Daniel Machon Date: Tue, 9 Apr 2024 12:41:59 +0200 Subject: net: sparx5: fix wrong config being used when reconfiguring PCS The wrong port config is being used if the PCS is reconfigured. Fix this by correctly using the new config instead of the old one. Fixes: 946e7fd5053a ("net: sparx5: add port module support") Signed-off-by: Daniel Machon Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20240409-link-mode-reconfiguration-fix-v2-1-db6a507f3627@microchip.com Signed-off-by: Paolo Abeni --- drivers/net/ethernet/microchip/sparx5/sparx5_port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c index 3a1b1a1f5a19..60dd2fd603a8 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_port.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_port.c @@ -731,7 +731,7 @@ static int sparx5_port_pcs_low_set(struct sparx5 *sparx5, bool sgmii = false, inband_aneg = false; int err; - if (port->conf.inband) { + if (conf->inband) { if (conf->portmode == PHY_INTERFACE_MODE_SGMII || conf->portmode == PHY_INTERFACE_MODE_QSGMII) inband_aneg = true; /* Cisco-SGMII in-band-aneg */ @@ -948,7 +948,7 @@ int sparx5_port_pcs_set(struct sparx5 *sparx5, if (err) return -EINVAL; - if (port->conf.inband) { + if (conf->inband) { /* Enable/disable 1G counters in ASM */ spx5_rmw(ASM_PORT_CFG_CSC_STAT_DIS_SET(high_speed_dev), ASM_PORT_CFG_CSC_STAT_DIS, -- cgit v1.3.1 From d51dc8dd6ab6f93a894ff8b38d3b8d02c98eb9fb Mon Sep 17 00:00:00 2001 From: Gerd Bayer Date: Tue, 9 Apr 2024 13:37:53 +0200 Subject: Revert "s390/ism: fix receive message buffer allocation" This reverts commit 58effa3476536215530c9ec4910ffc981613b413. Review was not finished on this patch. So it's not ready for upstreaming. Signed-off-by: Gerd Bayer Link: https://lore.kernel.org/r/20240409113753.2181368-1-gbayer@linux.ibm.com Fixes: 58effa347653 ("s390/ism: fix receive message buffer allocation") Signed-off-by: Paolo Abeni --- drivers/s390/net/ism_drv.c | 38 +++++++++----------------------------- 1 file changed, 9 insertions(+), 29 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index affb05521e14..2c8e964425dc 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -14,8 +14,6 @@ #include #include #include -#include -#include #include "ism.h" @@ -294,15 +292,13 @@ out: static void ism_free_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { clear_bit(dmb->sba_idx, ism->sba_bitmap); - dma_unmap_page(&ism->pdev->dev, dmb->dma_addr, dmb->dmb_len, - DMA_FROM_DEVICE); - folio_put(virt_to_folio(dmb->cpu_addr)); + dma_free_coherent(&ism->pdev->dev, dmb->dmb_len, + dmb->cpu_addr, dmb->dma_addr); } static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { unsigned long bit; - int rc; if (PAGE_ALIGN(dmb->dmb_len) > dma_get_max_seg_size(&ism->pdev->dev)) return -EINVAL; @@ -319,30 +315,14 @@ static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) test_and_set_bit(dmb->sba_idx, ism->sba_bitmap)) return -EINVAL; - dmb->cpu_addr = - folio_address(folio_alloc(GFP_KERNEL | __GFP_NOWARN | - __GFP_NOMEMALLOC | __GFP_NORETRY, - get_order(dmb->dmb_len))); + dmb->cpu_addr = dma_alloc_coherent(&ism->pdev->dev, dmb->dmb_len, + &dmb->dma_addr, + GFP_KERNEL | __GFP_NOWARN | + __GFP_NOMEMALLOC | __GFP_NORETRY); + if (!dmb->cpu_addr) + clear_bit(dmb->sba_idx, ism->sba_bitmap); - if (!dmb->cpu_addr) { - rc = -ENOMEM; - goto out_bit; - } - dmb->dma_addr = dma_map_page(&ism->pdev->dev, - virt_to_page(dmb->cpu_addr), 0, - dmb->dmb_len, DMA_FROM_DEVICE); - if (dma_mapping_error(&ism->pdev->dev, dmb->dma_addr)) { - rc = -ENOMEM; - goto out_free; - } - - return 0; - -out_free: - kfree(dmb->cpu_addr); -out_bit: - clear_bit(dmb->sba_idx, ism->sba_bitmap); - return rc; + return dmb->cpu_addr ? 0 : -ENOMEM; } int ism_register_dmb(struct ism_dev *ism, struct ism_dmb *dmb, -- cgit v1.3.1 From 17c560113231ddc20088553c7b499b289b664311 Mon Sep 17 00:00:00 2001 From: Arınç ÜNAL Date: Tue, 9 Apr 2024 18:01:14 +0300 Subject: net: dsa: mt7530: trap link-local frames regardless of ST Port State MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) of the Open Systems Interconnection basic reference model (OSI/RM) are described; the medium access control (MAC) and logical link control (LLC) sublayers. The MAC sublayer is the one facing the physical layer. In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A Bridge component comprises a MAC Relay Entity for interconnecting the Ports of the Bridge, at least two Ports, and higher layer entities with at least a Spanning Tree Protocol Entity included. Each Bridge Port also functions as an end station and shall provide the MAC Service to an LLC Entity. Each instance of the MAC Service is provided to a distinct LLC Entity that supports protocol identification, multiplexing, and demultiplexing, for protocol data unit (PDU) transmission and reception by one or more higher layer entities. It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC Entity associated with each Bridge Port is modeled as being directly connected to the attached Local Area Network (LAN). On the switch with CPU port architecture, CPU port functions as Management Port, and the Management Port functionality is provided by software which functions as an end station. Software is connected to an IEEE 802 LAN that is wholly contained within the system that incorporates the Bridge. Software provides access to the LLC Entity associated with each Bridge Port by the value of the source port field on the special tag on the frame received by software. We call frames that carry control information to determine the active topology and current extent of each Virtual Local Area Network (VLAN), i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration Protocol Data Units (MVRPDUs), and frames from other link constrained protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They are not forwarded by a Bridge. Permanently configured entries in the filtering database (FDB) ensure that such frames are discarded by the Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: Each of the reserved MAC addresses specified in Table 8-1 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be permanently configured in the FDB in C-VLAN components and ERs. Each of the reserved MAC addresses specified in Table 8-2 (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently configured in the FDB in S-VLAN components. Each of the reserved MAC addresses specified in Table 8-3 (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in TPMR components. The FDB entries for reserved MAC addresses shall specify filtering for all Bridge Ports and all VIDs. Management shall not provide the capability to modify or remove entries for reserved MAC addresses. The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of propagation of PDUs within a Bridged Network, as follows: The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. PDUs transmitted using this destination address, or any other addresses that appear in Table 8-1, Table 8-2, and Table 8-3 (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can therefore travel no further than those stations that can be reached via a single individual LAN from the originating station. The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an address that no conformant S-VLAN component, C-VLAN component, or MAC Bridge can forward; however, this address is relayed by a TPMR component. PDUs using this destination address, or any of the other addresses that appear in both Table 8-1 and Table 8-2 but not in Table 8-3 (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by any TPMRs but will propagate no further than the nearest S-VLAN component, C-VLAN component, or MAC Bridge. The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address that no conformant C-VLAN component, MAC Bridge can forward; however, it is relayed by TPMR components and S-VLAN components. PDUs using this destination address, or any of the other addresses that appear in Table 8-1 but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and S-VLAN components but will propagate no further than the nearest C-VLAN component or MAC Bridge. Because the LLC Entity associated with each Bridge Port is provided via CPU port, we must not filter these frames but forward them to CPU port. In a Bridge, the transmission Port is majorly decided by ingress and egress rules, FDB, and spanning tree Port State functions of the Forwarding Process. For link-local frames, only CPU port should be designated as destination port in the FDB, and the other functions of the Forwarding Process must not interfere with the decision of the transmission Port. We call this process trapping frames to CPU port. Therefore, on the switch with CPU port architecture, link-local frames must be trapped to CPU port, and certain link-local frames received by a Port of a Bridge comprising a TPMR component or an S-VLAN component must be excluded from it. A Bridge of the switch with CPU port architecture cannot comprise a Two-Port MAC Relay (TPMR) component as a TPMR component supports only a subset of the functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port doesn't count) of this architecture will either function as a standard MAC Bridge or a standard VLAN Bridge. Therefore, a Bridge of this architecture can only comprise S-VLAN components, C-VLAN components, or MAC Bridge components. Since there's no TPMR component, we don't need to relay PDUs using the destination addresses specified on the Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge section where they must be relayed by TPMR components. One option to trap link-local frames to CPU port is to add static FDB entries with CPU port designated as destination port. However, because that Independent VLAN Learning (IVL) is being used on every VID, each entry only applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC Bridge component or a C-VLAN component, there would have to be 16 times 4096 entries. This switch intellectual property can only hold a maximum of 2048 entries. Using this option, there also isn't a mechanism to prevent link-local frames from being discarded when the spanning tree Port State of the reception Port is discarding. The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 registers. Whilst this applies to every VID, it doesn't contain all of the reserved MAC addresses without affecting the remaining Standard Group MAC Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF destination addresses which may be relayed by MAC Bridges or VLAN Bridges. The latter option provides better but not complete conformance. This switch intellectual property also does not provide a mechanism to trap link-local frames with specific destination addresses to CPU port by Bridge, to conform to the filtering rules for the distinct Bridge components. Therefore, regardless of the type of the Bridge component, link-local frames with these destination addresses will be trapped to CPU port: 01-80-C2-00-00-[00,01,02,03,0E] In a Bridge comprising a MAC Bridge component or a C-VLAN component: Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] In a Bridge comprising an S-VLAN component: Link-local frames with these destination addresses will be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-00 Link-local frames with these destination addresses won't be trapped to CPU port which won't conform to IEEE Std 802.1Q-2022: 01-80-C2-00-00-[04,05,06,07,08,09,0A] Currently on this switch intellectual property, if the spanning tree Port State of the reception Port is discarding, link-local frames will be discarded. To trap link-local frames regardless of the spanning tree Port State, make the switch regard them as Bridge Protocol Data Units (BPDUs). This switch intellectual property only lets the frames regarded as BPDUs bypass the spanning tree Port State function of the Forwarding Process. With this change, the only remaining interference is the ingress rules. When the reception Port has no PVID assigned on software, VLAN-untagged frames won't be allowed in. There doesn't seem to be a mechanism on the switch intellectual property to have link-local frames bypass this function of the Forwarding Process. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Reviewed-by: Daniel Golle Signed-off-by: Arınç ÜNAL Link: https://lore.kernel.org/r/20240409-b4-for-net-mt7530-fix-link-local-when-stp-discarding-v2-1-07b1150164ac@arinc9.com Signed-off-by: Paolo Abeni --- drivers/net/dsa/mt7530.c | 229 ++++++++++++++++++++++++++++++++++++++++------- drivers/net/dsa/mt7530.h | 5 ++ 2 files changed, 200 insertions(+), 34 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 451ff0620c2e..c0d0bce0b594 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -950,20 +950,173 @@ static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface) mutex_unlock(&priv->reg_mutex); } -/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std - * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA - * must only be propagated to C-VLAN and MAC Bridge components. That means - * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, - * these frames are supposed to be processed by the CPU (software). So we make - * the switch only forward them to the CPU port. And if received from a CPU - * port, forward to a single port. The software is responsible of making the - * switch conform to the latter by setting a single port as destination port on - * the special tag. +/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) + * of the Open Systems Interconnection basic reference model (OSI/RM) are + * described; the medium access control (MAC) and logical link control (LLC) + * sublayers. The MAC sublayer is the one facing the physical layer. * - * This switch intellectual property cannot conform to this part of the standard - * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC - * DAs, it also includes :22-FF which the scope of propagation is not supposed - * to be restricted for these MAC DAs. + * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A + * Bridge component comprises a MAC Relay Entity for interconnecting the Ports + * of the Bridge, at least two Ports, and higher layer entities with at least a + * Spanning Tree Protocol Entity included. + * + * Each Bridge Port also functions as an end station and shall provide the MAC + * Service to an LLC Entity. Each instance of the MAC Service is provided to a + * distinct LLC Entity that supports protocol identification, multiplexing, and + * demultiplexing, for protocol data unit (PDU) transmission and reception by + * one or more higher layer entities. + * + * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC + * Entity associated with each Bridge Port is modeled as being directly + * connected to the attached Local Area Network (LAN). + * + * On the switch with CPU port architecture, CPU port functions as Management + * Port, and the Management Port functionality is provided by software which + * functions as an end station. Software is connected to an IEEE 802 LAN that is + * wholly contained within the system that incorporates the Bridge. Software + * provides access to the LLC Entity associated with each Bridge Port by the + * value of the source port field on the special tag on the frame received by + * software. + * + * We call frames that carry control information to determine the active + * topology and current extent of each Virtual Local Area Network (VLAN), i.e., + * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration + * Protocol Data Units (MVRPDUs), and frames from other link constrained + * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and + * Link Layer Discovery Protocol (LLDP), link-local frames. They are not + * forwarded by a Bridge. Permanently configured entries in the filtering + * database (FDB) ensure that such frames are discarded by the Forwarding + * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: + * + * Each of the reserved MAC addresses specified in Table 8-1 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be + * permanently configured in the FDB in C-VLAN components and ERs. + * + * Each of the reserved MAC addresses specified in Table 8-2 + * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently + * configured in the FDB in S-VLAN components. + * + * Each of the reserved MAC addresses specified in Table 8-3 + * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in + * TPMR components. + * + * The FDB entries for reserved MAC addresses shall specify filtering for all + * Bridge Ports and all VIDs. Management shall not provide the capability to + * modify or remove entries for reserved MAC addresses. + * + * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of + * propagation of PDUs within a Bridged Network, as follows: + * + * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no + * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) + * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. + * PDUs transmitted using this destination address, or any other addresses + * that appear in Table 8-1, Table 8-2, and Table 8-3 + * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can + * therefore travel no further than those stations that can be reached via a + * single individual LAN from the originating station. + * + * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an + * address that no conformant S-VLAN component, C-VLAN component, or MAC + * Bridge can forward; however, this address is relayed by a TPMR component. + * PDUs using this destination address, or any of the other addresses that + * appear in both Table 8-1 and Table 8-2 but not in Table 8-3 + * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by + * any TPMRs but will propagate no further than the nearest S-VLAN component, + * C-VLAN component, or MAC Bridge. + * + * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address + * that no conformant C-VLAN component, MAC Bridge can forward; however, it is + * relayed by TPMR components and S-VLAN components. PDUs using this + * destination address, or any of the other addresses that appear in Table 8-1 + * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), + * will be relayed by TPMR components and S-VLAN components but will propagate + * no further than the nearest C-VLAN component or MAC Bridge. + * + * Because the LLC Entity associated with each Bridge Port is provided via CPU + * port, we must not filter these frames but forward them to CPU port. + * + * In a Bridge, the transmission Port is majorly decided by ingress and egress + * rules, FDB, and spanning tree Port State functions of the Forwarding Process. + * For link-local frames, only CPU port should be designated as destination port + * in the FDB, and the other functions of the Forwarding Process must not + * interfere with the decision of the transmission Port. We call this process + * trapping frames to CPU port. + * + * Therefore, on the switch with CPU port architecture, link-local frames must + * be trapped to CPU port, and certain link-local frames received by a Port of a + * Bridge comprising a TPMR component or an S-VLAN component must be excluded + * from it. + * + * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port + * MAC Relay (TPMR) component as a TPMR component supports only a subset of the + * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port + * doesn't count) of this architecture will either function as a standard MAC + * Bridge or a standard VLAN Bridge. + * + * Therefore, a Bridge of this architecture can only comprise S-VLAN components, + * C-VLAN components, or MAC Bridge components. Since there's no TPMR component, + * we don't need to relay PDUs using the destination addresses specified on the + * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge + * section where they must be relayed by TPMR components. + * + * One option to trap link-local frames to CPU port is to add static FDB entries + * with CPU port designated as destination port. However, because that + * Independent VLAN Learning (IVL) is being used on every VID, each entry only + * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC + * Bridge component or a C-VLAN component, there would have to be 16 times 4096 + * entries. This switch intellectual property can only hold a maximum of 2048 + * entries. Using this option, there also isn't a mechanism to prevent + * link-local frames from being discarded when the spanning tree Port State of + * the reception Port is discarding. + * + * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 + * registers. Whilst this applies to every VID, it doesn't contain all of the + * reserved MAC addresses without affecting the remaining Standard Group MAC + * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the + * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination + * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF + * destination addresses which may be relayed by MAC Bridges or VLAN Bridges. + * The latter option provides better but not complete conformance. + * + * This switch intellectual property also does not provide a mechanism to trap + * link-local frames with specific destination addresses to CPU port by Bridge, + * to conform to the filtering rules for the distinct Bridge components. + * + * Therefore, regardless of the type of the Bridge component, link-local frames + * with these destination addresses will be trapped to CPU port: + * + * 01-80-C2-00-00-[00,01,02,03,0E] + * + * In a Bridge comprising a MAC Bridge component or a C-VLAN component: + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] + * + * In a Bridge comprising an S-VLAN component: + * + * Link-local frames with these destination addresses will be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-00 + * + * Link-local frames with these destination addresses won't be trapped to CPU + * port which won't conform to IEEE Std 802.1Q-2022: + * + * 01-80-C2-00-00-[04,05,06,07,08,09,0A] + * + * To trap link-local frames to CPU port as conformant as this switch + * intellectual property can allow, link-local frames are made to be regarded as + * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual + * property only lets the frames regarded as BPDUs bypass the spanning tree Port + * State function of the Forwarding Process. + * + * The only remaining interference is the ingress rules. When the reception Port + * has no PVID assigned on software, VLAN-untagged frames won't be allowed in. + * There doesn't seem to be a mechanism on the switch intellectual property to + * have link-local frames bypass this function of the Forwarding Process. */ static void mt753x_trap_frames(struct mt7530_priv *priv) @@ -971,35 +1124,43 @@ mt753x_trap_frames(struct mt7530_priv *priv) /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them * VLAN-untagged. */ - mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK | - MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | - MT753X_BPDU_PORT_FW_MASK, - MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_BPC, + MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK | + MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | + MT753X_BPDU_PORT_FW_MASK, + MT753X_PAE_BPDU_FR | + MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress * them VLAN-untagged. */ - mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK | - MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK | - MT753X_R01_PORT_FW_MASK, - MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_RGAC1, + MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK | + MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR | + MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK, + MT753X_R02_BPDU_FR | + MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_R01_BPDU_FR | + MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress * them VLAN-untagged. */ - mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK | - MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK | - MT753X_R03_PORT_FW_MASK, - MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | - MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | - MT753X_BPDU_CPU_ONLY); + mt7530_rmw(priv, MT753X_RGAC2, + MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK | + MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR | + MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK, + MT753X_R0E_BPDU_FR | + MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | + MT753X_R03_BPDU_FR | + MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | + MT753X_BPDU_CPU_ONLY); } static void diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 9439db495001..585db03c0548 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -65,6 +65,7 @@ enum mt753x_id { /* Registers for BPDU and PAE frame control*/ #define MT753X_BPC 0x24 +#define MT753X_PAE_BPDU_FR BIT(25) #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22) #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x) #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16) @@ -75,20 +76,24 @@ enum mt753x_id { /* Register for :01 and :02 MAC DA frame control */ #define MT753X_RGAC1 0x28 +#define MT753X_R02_BPDU_FR BIT(25) #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22) #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x) #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16) #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x) +#define MT753X_R01_BPDU_FR BIT(9) #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6) #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x) #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0) /* Register for :03 and :0E MAC DA frame control */ #define MT753X_RGAC2 0x2c +#define MT753X_R0E_BPDU_FR BIT(25) #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22) #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x) #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16) #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x) +#define MT753X_R03_BPDU_FR BIT(9) #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6) #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x) #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0) -- cgit v1.3.1 From 713a85195aad25d8a26786a37b674e3e5ec09e3c Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Wed, 10 Apr 2024 09:13:55 +0000 Subject: net: ena: Fix potential sign extension issue Small unsigned types are promoted to larger signed types in the case of multiplication, the result of which may overflow. In case the result of such a multiplication has its MSB turned on, it will be sign extended with '1's. This changes the multiplication result. Code example of the phenomenon: ------------------------------- u16 x, y; size_t z1, z2; x = y = 0xffff; printk("x=%x y=%x\n",x,y); z1 = x*y; z2 = (size_t)x*y; printk("z1=%lx z2=%lx\n", z1, z2); Output: ------- x=ffff y=ffff z1=fffffffffffe0001 z2=fffe0001 The expected result of ffff*ffff is fffe0001, and without the explicit casting to avoid the unwanted sign extension we got fffffffffffe0001. This commit adds an explicit casting to avoid the sign extension issue. Fixes: 689b2bdaaa14 ("net: ena: add functions for handling Low Latency Queues in ena_com") Signed-off-by: Arthur Kiyanovski Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amazon/ena/ena_com.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_com.c b/drivers/net/ethernet/amazon/ena/ena_com.c index 9e9e4a03f1a8..2d8a66ea82fa 100644 --- a/drivers/net/ethernet/amazon/ena/ena_com.c +++ b/drivers/net/ethernet/amazon/ena/ena_com.c @@ -351,7 +351,7 @@ static int ena_com_init_io_sq(struct ena_com_dev *ena_dev, ENA_COM_BOUNCE_BUFFER_CNTRL_CNT; io_sq->bounce_buf_ctrl.next_to_use = 0; - size = io_sq->bounce_buf_ctrl.buffer_size * + size = (size_t)io_sq->bounce_buf_ctrl.buffer_size * io_sq->bounce_buf_ctrl.buffers_num; dev_node = dev_to_node(ena_dev->dmadev); -- cgit v1.3.1 From f7e417180665234fdb7af2ebe33d89aaa434d16f Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Wed, 10 Apr 2024 09:13:56 +0000 Subject: net: ena: Wrong missing IO completions check order Missing IO completions check is called every second (HZ jiffies). This commit fixes several issues with this check: 1. Duplicate queues check: Max of 4 queues are scanned on each check due to monitor budget. Once reaching the budget, this check exits under the assumption that the next check will continue to scan the remainder of the queues, but in practice, next check will first scan the last already scanned queue which is not necessary and may cause the full queue scan to last a couple of seconds longer. The fix is to start every check with the next queue to scan. For example, on 8 IO queues: Bug: [0,1,2,3], [3,4,5,6], [6,7] Fix: [0,1,2,3], [4,5,6,7] 2. Unbalanced queues check: In case the number of active IO queues is not a multiple of budget, there will be checks which don't utilize the full budget because the full scan exits when reaching the last queue id. The fix is to run every TX completion check with exact queue budget regardless of the queue id. For example, on 7 IO queues: Bug: [0,1,2,3], [4,5,6], [0,1,2,3] Fix: [0,1,2,3], [4,5,6,0], [1,2,3,4] The budget may be lowered in case the number of IO queues is less than the budget (4) to make sure there are no duplicate queues on the same check. For example, on 3 IO queues: Bug: [0,1,2,0], [1,2,0,1] Fix: [0,1,2], [0,1,2] Fixes: 1738cd3ed342 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by: Amit Bernstein Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 09e7da1a69c9..59befc0f463c 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -3481,10 +3481,11 @@ static void check_for_missing_completions(struct ena_adapter *adapter) { struct ena_ring *tx_ring; struct ena_ring *rx_ring; - int i, budget, rc; + int qid, budget, rc; int io_queue_count; io_queue_count = adapter->xdp_num_queues + adapter->num_io_queues; + /* Make sure the driver doesn't turn the device in other process */ smp_rmb(); @@ -3497,27 +3498,29 @@ static void check_for_missing_completions(struct ena_adapter *adapter) if (adapter->missing_tx_completion_to == ENA_HW_HINTS_NO_TIMEOUT) return; - budget = ENA_MONITORED_TX_QUEUES; + budget = min_t(u32, io_queue_count, ENA_MONITORED_TX_QUEUES); - for (i = adapter->last_monitored_tx_qid; i < io_queue_count; i++) { - tx_ring = &adapter->tx_ring[i]; - rx_ring = &adapter->rx_ring[i]; + qid = adapter->last_monitored_tx_qid; + + while (budget) { + qid = (qid + 1) % io_queue_count; + + tx_ring = &adapter->tx_ring[qid]; + rx_ring = &adapter->rx_ring[qid]; rc = check_missing_comp_in_tx_queue(adapter, tx_ring); if (unlikely(rc)) return; - rc = !ENA_IS_XDP_INDEX(adapter, i) ? + rc = !ENA_IS_XDP_INDEX(adapter, qid) ? check_for_rx_interrupt_queue(adapter, rx_ring) : 0; if (unlikely(rc)) return; budget--; - if (!budget) - break; } - adapter->last_monitored_tx_qid = i % io_queue_count; + adapter->last_monitored_tx_qid = qid; } /* trigger napi schedule after 2 consecutive detections */ -- cgit v1.3.1 From bf02d9fe00632d22fa91d34749c7aacf397b6cde Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Wed, 10 Apr 2024 09:13:57 +0000 Subject: net: ena: Fix incorrect descriptor free behavior ENA has two types of TX queues: - queues which only process TX packets arriving from the network stack - queues which only process TX packets forwarded to it by XDP_REDIRECT or XDP_TX instructions The ena_free_tx_bufs() cycles through all descriptors in a TX queue and unmaps + frees every descriptor that hasn't been acknowledged yet by the device (uncompleted TX transactions). The function assumes that the processed TX queue is necessarily from the first category listed above and ends up using napi_consume_skb() for descriptors belonging to an XDP specific queue. This patch solves a bug in which, in case of a VF reset, the descriptors aren't freed correctly, leading to crashes. Fixes: 548c4940b9f1 ("net: ena: Implement XDP_TX action") Signed-off-by: Shay Agroskin Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amazon/ena/ena_netdev.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_netdev.c b/drivers/net/ethernet/amazon/ena/ena_netdev.c index 59befc0f463c..be5acfa41ee0 100644 --- a/drivers/net/ethernet/amazon/ena/ena_netdev.c +++ b/drivers/net/ethernet/amazon/ena/ena_netdev.c @@ -718,8 +718,11 @@ void ena_unmap_tx_buff(struct ena_ring *tx_ring, static void ena_free_tx_bufs(struct ena_ring *tx_ring) { bool print_once = true; + bool is_xdp_ring; u32 i; + is_xdp_ring = ENA_IS_XDP_INDEX(tx_ring->adapter, tx_ring->qid); + for (i = 0; i < tx_ring->ring_size; i++) { struct ena_tx_buffer *tx_info = &tx_ring->tx_buffer_info[i]; @@ -739,10 +742,15 @@ static void ena_free_tx_bufs(struct ena_ring *tx_ring) ena_unmap_tx_buff(tx_ring, tx_info); - dev_kfree_skb_any(tx_info->skb); + if (is_xdp_ring) + xdp_return_frame(tx_info->xdpf); + else + dev_kfree_skb_any(tx_info->skb); } - netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev, - tx_ring->qid)); + + if (!is_xdp_ring) + netdev_tx_reset_queue(netdev_get_tx_queue(tx_ring->netdev, + tx_ring->qid)); } static void ena_free_all_tx_bufs(struct ena_adapter *adapter) -- cgit v1.3.1 From 36a1ca01f0452f2549420e7279c2588729bd94df Mon Sep 17 00:00:00 2001 From: David Arinzon Date: Wed, 10 Apr 2024 09:13:58 +0000 Subject: net: ena: Set tx_info->xdpf value to NULL The patch mentioned in the `Fixes` tag removed the explicit assignment of tx_info->xdpf to NULL with the justification that there's no need to set tx_info->xdpf to NULL and tx_info->num_of_bufs to 0 in case of a mapping error. Both values won't be used once the mapping function returns an error, and their values would be overridden by the next transmitted packet. While both values do indeed get overridden in the next transmission call, the value of tx_info->xdpf is also used to check whether a TX descriptor's transmission has been completed (i.e. a completion for it was polled). An example scenario: 1. Mapping failed, tx_info->xdpf wasn't set to NULL 2. A VF reset occurred leading to IO resource destruction and a call to ena_free_tx_bufs() function 3. Although the descriptor whose mapping failed was freed by the transmission function, it still passes the check if (!tx_info->skb) (skb and xdp_frame are in a union) 4. The xdp_frame associated with the descriptor is freed twice This patch returns the assignment of NULL to tx_info->xdpf to make the cleaning function knows that the descriptor is already freed. Fixes: 504fd6a5390c ("net: ena: fix DMA mapping function issues in XDP") Signed-off-by: Shay Agroskin Signed-off-by: David Arinzon Reviewed-by: Shannon Nelson Signed-off-by: Paolo Abeni --- drivers/net/ethernet/amazon/ena/ena_xdp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/amazon/ena/ena_xdp.c b/drivers/net/ethernet/amazon/ena/ena_xdp.c index 337c435d3ce9..5b175e7e92a1 100644 --- a/drivers/net/ethernet/amazon/ena/ena_xdp.c +++ b/drivers/net/ethernet/amazon/ena/ena_xdp.c @@ -89,7 +89,7 @@ int ena_xdp_xmit_frame(struct ena_ring *tx_ring, rc = ena_xdp_tx_map_frame(tx_ring, tx_info, xdpf, &ena_tx_ctx); if (unlikely(rc)) - return rc; + goto err; ena_tx_ctx.req_id = req_id; @@ -112,7 +112,9 @@ int ena_xdp_xmit_frame(struct ena_ring *tx_ring, error_unmap_dma: ena_unmap_tx_buff(tx_ring, tx_info); +err: tx_info->xdpf = NULL; + return rc; } -- cgit v1.3.1 From 1aa4ad4eb695bac1b0a7ba542a16d6833c9c8dd8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Thu, 11 Apr 2024 08:58:45 +0300 Subject: serial: core: Fix missing shutdown and startup for serial base port We are seeing start_tx being called after port shutdown as noted by Jiri. This happens because we are missing the startup and shutdown related functions for the serial base port. Let's fix the issue by adding startup and shutdown functions for the serial base port to block tx flushing for the serial base port when the port is not in use. Fixes: 84a9582fd203 ("serial: core: Start managing serial controllers to enable runtime PM") Cc: stable Reported-by: Jiri Slaby Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20240411055848.38190-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_base.h | 4 ++++ drivers/tty/serial/serial_core.c | 20 +++++++++++++++++--- drivers/tty/serial/serial_port.c | 34 ++++++++++++++++++++++++++++++++++ 3 files changed, 55 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/serial_base.h b/drivers/tty/serial/serial_base.h index c74c548f0db6..b6c38d2edfd4 100644 --- a/drivers/tty/serial/serial_base.h +++ b/drivers/tty/serial/serial_base.h @@ -22,6 +22,7 @@ struct serial_ctrl_device { struct serial_port_device { struct device dev; struct uart_port *port; + unsigned int tx_enabled:1; }; int serial_base_ctrl_init(void); @@ -30,6 +31,9 @@ void serial_base_ctrl_exit(void); int serial_base_port_init(void); void serial_base_port_exit(void); +void serial_base_port_startup(struct uart_port *port); +void serial_base_port_shutdown(struct uart_port *port); + int serial_base_driver_register(struct device_driver *driver); void serial_base_driver_unregister(struct device_driver *driver); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 2247efe97250..c476d884356d 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -323,16 +323,26 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, bool init_hw) { struct tty_port *port = &state->port; + struct uart_port *uport; int retval; if (tty_port_initialized(port)) - return 0; + goto out_base_port_startup; retval = uart_port_startup(tty, state, init_hw); - if (retval) + if (retval) { set_bit(TTY_IO_ERROR, &tty->flags); + return retval; + } - return retval; +out_base_port_startup: + uport = uart_port_check(state); + if (!uport) + return -EIO; + + serial_base_port_startup(uport); + + return 0; } /* @@ -355,6 +365,9 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) if (tty) set_bit(TTY_IO_ERROR, &tty->flags); + if (uport) + serial_base_port_shutdown(uport); + if (tty_port_initialized(port)) { tty_port_set_initialized(port, false); @@ -1775,6 +1788,7 @@ static void uart_tty_port_shutdown(struct tty_port *port) uport->ops->stop_rx(uport); uart_port_unlock_irq(uport); + serial_base_port_shutdown(uport); uart_port_shutdown(port); /* diff --git a/drivers/tty/serial/serial_port.c b/drivers/tty/serial/serial_port.c index 22b9eeb23e68..7e3a1c7b097c 100644 --- a/drivers/tty/serial/serial_port.c +++ b/drivers/tty/serial/serial_port.c @@ -39,8 +39,12 @@ static int serial_port_runtime_resume(struct device *dev) /* Flush any pending TX for the port */ uart_port_lock_irqsave(port, &flags); + if (!port_dev->tx_enabled) + goto unlock; if (__serial_port_busy(port)) port->ops->start_tx(port); + +unlock: uart_port_unlock_irqrestore(port, flags); out: @@ -60,6 +64,11 @@ static int serial_port_runtime_suspend(struct device *dev) return 0; uart_port_lock_irqsave(port, &flags); + if (!port_dev->tx_enabled) { + uart_port_unlock_irqrestore(port, flags); + return 0; + } + busy = __serial_port_busy(port); if (busy) port->ops->start_tx(port); @@ -71,6 +80,31 @@ static int serial_port_runtime_suspend(struct device *dev) return busy ? -EBUSY : 0; } +static void serial_base_port_set_tx(struct uart_port *port, + struct serial_port_device *port_dev, + bool enabled) +{ + unsigned long flags; + + uart_port_lock_irqsave(port, &flags); + port_dev->tx_enabled = enabled; + uart_port_unlock_irqrestore(port, flags); +} + +void serial_base_port_startup(struct uart_port *port) +{ + struct serial_port_device *port_dev = port->port_dev; + + serial_base_port_set_tx(port, port_dev, true); +} + +void serial_base_port_shutdown(struct uart_port *port) +{ + struct serial_port_device *port_dev = port->port_dev; + + serial_base_port_set_tx(port, port_dev, false); +} + static DEFINE_RUNTIME_DEV_PM_OPS(serial_port_pm, serial_port_runtime_suspend, serial_port_runtime_resume, NULL); -- cgit v1.3.1 From 34b990e9bb54d20b9675ca9483be8668eed374d8 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 9 Apr 2024 13:29:10 -0300 Subject: usb: misc: onboard_usb_hub: Disable the USB hub clock on failure In case regulator_bulk_enable() fails, the previously enabled USB hub clock should be disabled. Fix it accordingly. Fixes: 65e62b8a955a ("usb: misc: onboard_usb_hub: Add support for clock input") Cc: stable Signed-off-by: Fabio Estevam Reviewed-by: Frieder Schrempf Acked-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/20240409162910.2061640-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/onboard_usb_hub.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c index c6101ed2d9d4..d8049275a023 100644 --- a/drivers/usb/misc/onboard_usb_hub.c +++ b/drivers/usb/misc/onboard_usb_hub.c @@ -78,7 +78,7 @@ static int onboard_hub_power_on(struct onboard_hub *hub) err = regulator_bulk_enable(hub->pdata->num_supplies, hub->supplies); if (err) { dev_err(hub->dev, "failed to enable supplies: %pe\n", ERR_PTR(err)); - return err; + goto disable_clk; } fsleep(hub->pdata->reset_us); @@ -87,6 +87,10 @@ static int onboard_hub_power_on(struct onboard_hub *hub) hub->is_powered_on = true; return 0; + +disable_clk: + clk_disable_unprepare(hub->clk); + return err; } static int onboard_hub_power_off(struct onboard_hub *hub) -- cgit v1.3.1 From c8d2f34ea96ea3bce6ba2535f867f0d4ee3b22e1 Mon Sep 17 00:00:00 2001 From: Samuel Thibault Date: Sat, 23 Mar 2024 17:48:43 +0100 Subject: speakup: Avoid crash on very long word In case a console is set up really large and contains a really long word (> 256 characters), we have to stop before the length of the word buffer. Signed-off-by: Samuel Thibault Fixes: c6e3fd22cd538 ("Staging: add speakup to the staging directory") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240323164843.1426997-1-samuel.thibault@ens-lyon.org Signed-off-by: Greg Kroah-Hartman --- drivers/accessibility/speakup/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/accessibility/speakup/main.c b/drivers/accessibility/speakup/main.c index 1fbc9b921c4f..736c2eb8c0f3 100644 --- a/drivers/accessibility/speakup/main.c +++ b/drivers/accessibility/speakup/main.c @@ -574,7 +574,7 @@ static u_long get_word(struct vc_data *vc) } attr_ch = get_char(vc, (u_short *)tmp_pos, &spk_attr); buf[cnt++] = attr_ch; - while (tmpx < vc->vc_cols - 1) { + while (tmpx < vc->vc_cols - 1 && cnt < sizeof(buf) - 1) { tmp_pos += 2; tmpx++; ch = get_char(vc, (u_short *)tmp_pos, &temp); -- cgit v1.3.1 From 0dc04112bee6fdd6eb847ccb32214703022c0269 Mon Sep 17 00:00:00 2001 From: Alexander Usyskin Date: Tue, 12 Mar 2024 07:19:58 +0200 Subject: mei: me: disable RPL-S on SPS and IGN firmwares Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) and SPS firmwares for RPL-S devices. These firmwares do not support the MEI protocol. Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID") Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin Signed-off-by: Tomas Winkler Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/pci-me.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index b5757993c9b2..c39718042e2e 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -116,7 +116,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)}, - {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_SPS_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)}, {MEI_PCI_DEVICE(MEI_DEV_ID_ARL_S, MEI_ME_PCH15_CFG)}, -- cgit v1.3.1 From 26ac2df47d4c58f17210b7a59037e40f7eca693e Mon Sep 17 00:00:00 2001 From: Ricky Wu Date: Thu, 14 Mar 2024 14:51:13 +0800 Subject: misc: rtsx: Fix rts5264 driver status incorrect when card removed rts5264 driver not clean express link error and set EXTRA_CAPS_SD_EXPRESS capability back when card removed Fixes: 6a511c9b3a0d ("misc: rtsx: add to support new card reader rts5264") Cc: stable Signed-off-by: Ricky Wu Link: https://lore.kernel.org/r/20240314065113.5962-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/cardreader/rtsx_pcr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c index 1a64364700eb..0ad2ff9065aa 100644 --- a/drivers/misc/cardreader/rtsx_pcr.c +++ b/drivers/misc/cardreader/rtsx_pcr.c @@ -1002,7 +1002,7 @@ static irqreturn_t rtsx_pci_isr(int irq, void *dev_id) } else { pcr->card_removed |= SD_EXIST; pcr->card_inserted &= ~SD_EXIST; - if (PCI_PID(pcr) == PID_5261) { + if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5264)) { rtsx_pci_write_register(pcr, RTS5261_FW_STATUS, RTS5261_EXPRESS_LINK_FAIL_MASK, 0); pcr->extra_caps |= EXTRA_CAPS_SD_EXPRESS; -- cgit v1.3.1 From e3dc66d998d2b0c2734db9ca1d6c94c97349529a Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 3 Apr 2024 13:13:40 +0800 Subject: Revert "mei: vsc: Call wake_up() in the threaded IRQ handler" This reverts commit 058a38acba15fd8e7b262ec6e17c4204cb15f984. It's not necessary to avoid a spinlock, a sleeping lock on PREEMPT_RT, in an interrupt handler as the interrupt handler itself would be called in a process context if PREEMPT_RT is enabled. So revert the patch. Cc: stable@vger.kernel.org # for 6.8 Signed-off-by: Sakari Ailus Acked-by: Tomas Winkler Link: https://lore.kernel.org/r/20240403051341.3534650-1-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/vsc-tp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index ecfb70cd057c..968a92a7425d 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -419,6 +419,8 @@ static irqreturn_t vsc_tp_isr(int irq, void *data) atomic_inc(&tp->assert_cnt); + wake_up(&tp->xfer_wait); + return IRQ_WAKE_THREAD; } @@ -426,8 +428,6 @@ static irqreturn_t vsc_tp_thread_isr(int irq, void *data) { struct vsc_tp *tp = data; - wake_up(&tp->xfer_wait); - if (tp->event_notify) tp->event_notify(tp->event_notify_context); -- cgit v1.3.1 From f6085a96c97387154be7eaebd1a5420eb3cd55dc Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Wed, 3 Apr 2024 13:13:41 +0800 Subject: mei: vsc: Unregister interrupt handler for system suspend Unregister the MEI VSC interrupt handler before system suspend and re-register it at system resume time. This mirrors implementation of other MEI devices. This patch fixes the bug that causes continuous stream of MEI VSC errors after system resume. Fixes: 386a766c4169 ("mei: Add MEI hardware support for IVSC device") Cc: stable@vger.kernel.org # for 6.8 Reported-by: Dominik Brodowski Signed-off-by: Wentong Wu Signed-off-by: Sakari Ailus Acked-by: Tomas Winkler Link: https://lore.kernel.org/r/20240403051341.3534650-2-wentong.wu@intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/misc/mei/platform-vsc.c | 17 ++++++++- drivers/misc/mei/vsc-tp.c | 84 +++++++++++++++++++++++++++++------------ drivers/misc/mei/vsc-tp.h | 3 ++ 3 files changed, 78 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/misc/mei/platform-vsc.c b/drivers/misc/mei/platform-vsc.c index 6c9f00bcb94b..b543e6b9f3cf 100644 --- a/drivers/misc/mei/platform-vsc.c +++ b/drivers/misc/mei/platform-vsc.c @@ -400,25 +400,40 @@ static void mei_vsc_remove(struct platform_device *pdev) static int mei_vsc_suspend(struct device *dev) { struct mei_device *mei_dev = dev_get_drvdata(dev); + struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); mei_stop(mei_dev); + mei_disable_interrupts(mei_dev); + + vsc_tp_free_irq(hw->tp); + return 0; } static int mei_vsc_resume(struct device *dev) { struct mei_device *mei_dev = dev_get_drvdata(dev); + struct mei_vsc_hw *hw = mei_dev_to_vsc_hw(mei_dev); int ret; - ret = mei_restart(mei_dev); + ret = vsc_tp_request_irq(hw->tp); if (ret) return ret; + ret = mei_restart(mei_dev); + if (ret) + goto err_free; + /* start timer if stopped in suspend */ schedule_delayed_work(&mei_dev->timer_work, HZ); return 0; + +err_free: + vsc_tp_free_irq(hw->tp); + + return ret; } static DEFINE_SIMPLE_DEV_PM_OPS(mei_vsc_pm_ops, mei_vsc_suspend, mei_vsc_resume); diff --git a/drivers/misc/mei/vsc-tp.c b/drivers/misc/mei/vsc-tp.c index 968a92a7425d..e6a98dba8a73 100644 --- a/drivers/misc/mei/vsc-tp.c +++ b/drivers/misc/mei/vsc-tp.c @@ -94,6 +94,27 @@ static const struct acpi_gpio_mapping vsc_tp_acpi_gpios[] = { {} }; +static irqreturn_t vsc_tp_isr(int irq, void *data) +{ + struct vsc_tp *tp = data; + + atomic_inc(&tp->assert_cnt); + + wake_up(&tp->xfer_wait); + + return IRQ_WAKE_THREAD; +} + +static irqreturn_t vsc_tp_thread_isr(int irq, void *data) +{ + struct vsc_tp *tp = data; + + if (tp->event_notify) + tp->event_notify(tp->event_notify_context); + + return IRQ_HANDLED; +} + /* wakeup firmware and wait for response */ static int vsc_tp_wakeup_request(struct vsc_tp *tp) { @@ -383,6 +404,37 @@ int vsc_tp_register_event_cb(struct vsc_tp *tp, vsc_tp_event_cb_t event_cb, } EXPORT_SYMBOL_NS_GPL(vsc_tp_register_event_cb, VSC_TP); +/** + * vsc_tp_request_irq - request irq for vsc_tp device + * @tp: vsc_tp device handle + */ +int vsc_tp_request_irq(struct vsc_tp *tp) +{ + struct spi_device *spi = tp->spi; + struct device *dev = &spi->dev; + int ret; + + irq_set_status_flags(spi->irq, IRQ_DISABLE_UNLAZY); + ret = request_threaded_irq(spi->irq, vsc_tp_isr, vsc_tp_thread_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), tp); + if (ret) + return ret; + + return 0; +} +EXPORT_SYMBOL_NS_GPL(vsc_tp_request_irq, VSC_TP); + +/** + * vsc_tp_free_irq - free irq for vsc_tp device + * @tp: vsc_tp device handle + */ +void vsc_tp_free_irq(struct vsc_tp *tp) +{ + free_irq(tp->spi->irq, tp); +} +EXPORT_SYMBOL_NS_GPL(vsc_tp_free_irq, VSC_TP); + /** * vsc_tp_intr_synchronize - synchronize vsc_tp interrupt * @tp: vsc_tp device handle @@ -413,27 +465,6 @@ void vsc_tp_intr_disable(struct vsc_tp *tp) } EXPORT_SYMBOL_NS_GPL(vsc_tp_intr_disable, VSC_TP); -static irqreturn_t vsc_tp_isr(int irq, void *data) -{ - struct vsc_tp *tp = data; - - atomic_inc(&tp->assert_cnt); - - wake_up(&tp->xfer_wait); - - return IRQ_WAKE_THREAD; -} - -static irqreturn_t vsc_tp_thread_isr(int irq, void *data) -{ - struct vsc_tp *tp = data; - - if (tp->event_notify) - tp->event_notify(tp->event_notify_context); - - return IRQ_HANDLED; -} - static int vsc_tp_match_any(struct acpi_device *adev, void *data) { struct acpi_device **__adev = data; @@ -490,10 +521,9 @@ static int vsc_tp_probe(struct spi_device *spi) tp->spi = spi; irq_set_status_flags(spi->irq, IRQ_DISABLE_UNLAZY); - ret = devm_request_threaded_irq(dev, spi->irq, vsc_tp_isr, - vsc_tp_thread_isr, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - dev_name(dev), tp); + ret = request_threaded_irq(spi->irq, vsc_tp_isr, vsc_tp_thread_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(dev), tp); if (ret) return ret; @@ -522,6 +552,8 @@ static int vsc_tp_probe(struct spi_device *spi) err_destroy_lock: mutex_destroy(&tp->mutex); + free_irq(spi->irq, tp); + return ret; } @@ -532,6 +564,8 @@ static void vsc_tp_remove(struct spi_device *spi) platform_device_unregister(tp->pdev); mutex_destroy(&tp->mutex); + + free_irq(spi->irq, tp); } static const struct acpi_device_id vsc_tp_acpi_ids[] = { diff --git a/drivers/misc/mei/vsc-tp.h b/drivers/misc/mei/vsc-tp.h index f9513ddc3e40..14ca195cbddc 100644 --- a/drivers/misc/mei/vsc-tp.h +++ b/drivers/misc/mei/vsc-tp.h @@ -37,6 +37,9 @@ int vsc_tp_xfer(struct vsc_tp *tp, u8 cmd, const void *obuf, size_t olen, int vsc_tp_register_event_cb(struct vsc_tp *tp, vsc_tp_event_cb_t event_cb, void *context); +int vsc_tp_request_irq(struct vsc_tp *tp); +void vsc_tp_free_irq(struct vsc_tp *tp); + void vsc_tp_intr_enable(struct vsc_tp *tp); void vsc_tp_intr_disable(struct vsc_tp *tp); void vsc_tp_intr_synchronize(struct vsc_tp *tp); -- cgit v1.3.1 From d1718530e3f640b7d5f0050e725216eab57a85d8 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Mon, 8 Apr 2024 10:16:33 -0700 Subject: comedi: vmk80xx: fix incomplete endpoint checking While vmk80xx does have endpoint checking implemented, some things can fall through the cracks. Depending on the hardware model, URBs can have either bulk or interrupt type, and current version of vmk80xx_find_usb_endpoints() function does not take that fully into account. While this warning does not seem to be too harmful, at the very least it will crash systems with 'panic_on_warn' set on them. Fix the issue found by Syzkaller [1] by somewhat simplifying the endpoint checking process with usb_find_common_endpoints() and ensuring that only expected endpoint types are present. This patch has not been tested on real hardware. [1] Syzkaller report: usb 1-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 0 PID: 781 at drivers/usb/core/urb.c:504 usb_submit_urb+0xc4e/0x18c0 drivers/usb/core/urb.c:503 ... Call Trace: usb_start_wait_urb+0x113/0x520 drivers/usb/core/message.c:59 vmk80xx_reset_device drivers/comedi/drivers/vmk80xx.c:227 [inline] vmk80xx_auto_attach+0xa1c/0x1a40 drivers/comedi/drivers/vmk80xx.c:818 comedi_auto_config+0x238/0x380 drivers/comedi/drivers.c:1067 usb_probe_interface+0x5cd/0xb00 drivers/usb/core/driver.c:399 ... Similar issue also found by Syzkaller: Link: https://syzkaller.appspot.com/bug?extid=5205eb2f17de3e01946e Reported-and-tested-by: syzbot+5f29dc6a889fc42bd896@syzkaller.appspotmail.com Cc: stable Fixes: 49253d542cc0 ("staging: comedi: vmk80xx: factor out usb endpoint detection") Reviewed-by: Ian Abbott Signed-off-by: Nikita Zhandarovich Link: https://lore.kernel.org/r/20240408171633.31649-1-n.zhandarovich@fintech.ru Signed-off-by: Greg Kroah-Hartman --- drivers/comedi/drivers/vmk80xx.c | 35 ++++++++++++----------------------- 1 file changed, 12 insertions(+), 23 deletions(-) (limited to 'drivers') diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c index 4536ed43f65b..84dce5184a77 100644 --- a/drivers/comedi/drivers/vmk80xx.c +++ b/drivers/comedi/drivers/vmk80xx.c @@ -641,33 +641,22 @@ static int vmk80xx_find_usb_endpoints(struct comedi_device *dev) struct vmk80xx_private *devpriv = dev->private; struct usb_interface *intf = comedi_to_usb_interface(dev); struct usb_host_interface *iface_desc = intf->cur_altsetting; - struct usb_endpoint_descriptor *ep_desc; - int i; - - if (iface_desc->desc.bNumEndpoints != 2) - return -ENODEV; - - for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) { - ep_desc = &iface_desc->endpoint[i].desc; - - if (usb_endpoint_is_int_in(ep_desc) || - usb_endpoint_is_bulk_in(ep_desc)) { - if (!devpriv->ep_rx) - devpriv->ep_rx = ep_desc; - continue; - } + struct usb_endpoint_descriptor *ep_rx_desc, *ep_tx_desc; + int ret; - if (usb_endpoint_is_int_out(ep_desc) || - usb_endpoint_is_bulk_out(ep_desc)) { - if (!devpriv->ep_tx) - devpriv->ep_tx = ep_desc; - continue; - } - } + if (devpriv->model == VMK8061_MODEL) + ret = usb_find_common_endpoints(iface_desc, &ep_rx_desc, + &ep_tx_desc, NULL, NULL); + else + ret = usb_find_common_endpoints(iface_desc, NULL, NULL, + &ep_rx_desc, &ep_tx_desc); - if (!devpriv->ep_rx || !devpriv->ep_tx) + if (ret) return -ENODEV; + devpriv->ep_rx = ep_rx_desc; + devpriv->ep_tx = ep_tx_desc; + if (!usb_endpoint_maxp(devpriv->ep_rx) || !usb_endpoint_maxp(devpriv->ep_tx)) return -EINVAL; -- cgit v1.3.1 From aaef73821a3b0194a01bd23ca77774f704a04d40 Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Sat, 30 Mar 2024 19:01:14 +0000 Subject: binder: check offset alignment in binder_get_object() Commit 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") introduced changes to how binder objects are copied. In doing so, it unintentionally removed an offset alignment check done through calls to binder_alloc_copy_from_buffer() -> check_buffer(). These calls were replaced in binder_get_object() with copy_from_user(), so now an explicit offset alignment check is needed here. This avoids later complications when unwinding the objects gets harder. It is worth noting this check existed prior to commit 7a67a39320df ("binder: add function to copy binder object from buffer"), likely removed due to redundancy at the time. Fixes: 6d98eb95b450 ("binder: avoid potential data leakage when copying txn") Cc: stable@vger.kernel.org Signed-off-by: Carlos Llamas Acked-by: Todd Kjos Link: https://lore.kernel.org/r/20240330190115.1877819-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/android/binder.c b/drivers/android/binder.c index bad28cf42010..dd6923d37931 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1708,8 +1708,10 @@ static size_t binder_get_object(struct binder_proc *proc, size_t object_size = 0; read_size = min_t(size_t, sizeof(*object), buffer->data_size - offset); - if (offset > buffer->data_size || read_size < sizeof(*hdr)) + if (offset > buffer->data_size || read_size < sizeof(*hdr) || + !IS_ALIGNED(offset, sizeof(u32))) return 0; + if (u) { if (copy_from_user(object, u + offset, read_size)) return 0; -- cgit v1.3.1 From 50a9b7fc151e67b9e642232d32e8c5a5ac13e64a Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Fri, 5 Apr 2024 13:07:11 -0700 Subject: drm/xe/display: Fix double mutex initialization MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit All of these mutexes are already initialized by the display side since commit 3fef3e6ff86a ("drm/i915: move display mutex inits to display code"), so the xe shouldn´t initialize them. Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: Jani Nikula Cc: Arun R Murthy Reviewed-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/20240405200711.2041428-1-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi (cherry picked from commit 117de185edf2c5767f03575219bf7a43b161ff0d) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/display/xe_display.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/display/xe_display.c b/drivers/gpu/drm/xe/display/xe_display.c index e4db069f0db3..6ec375c1c4b6 100644 --- a/drivers/gpu/drm/xe/display/xe_display.c +++ b/drivers/gpu/drm/xe/display/xe_display.c @@ -108,11 +108,6 @@ int xe_display_create(struct xe_device *xe) xe->display.hotplug.dp_wq = alloc_ordered_workqueue("xe-dp", 0); drmm_mutex_init(&xe->drm, &xe->sb_lock); - drmm_mutex_init(&xe->drm, &xe->display.backlight.lock); - drmm_mutex_init(&xe->drm, &xe->display.audio.mutex); - drmm_mutex_init(&xe->drm, &xe->display.wm.wm_mutex); - drmm_mutex_init(&xe->drm, &xe->display.pps.mutex); - drmm_mutex_init(&xe->drm, &xe->display.hdcp.hdcp_mutex); xe->enabled_irq_mask = ~0; err = drmm_add_action_or_reset(&xe->drm, display_destroy, NULL); -- cgit v1.3.1 From a8ad8715472bb8f6a2ea8b4072a28151eb9f4f24 Mon Sep 17 00:00:00 2001 From: Karthik Poosa Date: Fri, 5 Apr 2024 18:31:27 +0530 Subject: drm/xe/hwmon: Cast result to output precision on left shift of operand Address potential overflow in result of left shift of a lower precision (u32) operand before assignment to higher precision (u64) variable. v2: - Update commit message. (Himal) Fixes: 4446fcf220ce ("drm/xe/hwmon: Expose power1_max_interval") Signed-off-by: Karthik Poosa Reviewed-by: Anshuman Gupta Cc: Badal Nilawar Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.com Signed-off-by: Lucas De Marchi (cherry picked from commit 883232b47b81108b0252197c747f396ecd51455a) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_hwmon.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_hwmon.c b/drivers/gpu/drm/xe/xe_hwmon.c index b82233a41606..9ac7fbe201b3 100644 --- a/drivers/gpu/drm/xe/xe_hwmon.c +++ b/drivers/gpu/drm/xe/xe_hwmon.c @@ -290,7 +290,7 @@ xe_hwmon_power1_max_interval_show(struct device *dev, struct device_attribute *a * As y can be < 2, we compute tau4 = (4 | x) << y * and then add 2 when doing the final right shift to account for units */ - tau4 = ((1 << x_w) | x) << y; + tau4 = (u64)((1 << x_w) | x) << y; /* val in hwmon interface units (millisec) */ out = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w); @@ -330,7 +330,7 @@ xe_hwmon_power1_max_interval_store(struct device *dev, struct device_attribute * r = FIELD_PREP(PKG_MAX_WIN, PKG_MAX_WIN_DEFAULT); x = REG_FIELD_GET(PKG_MAX_WIN_X, r); y = REG_FIELD_GET(PKG_MAX_WIN_Y, r); - tau4 = ((1 << x_w) | x) << y; + tau4 = (u64)((1 << x_w) | x) << y; max_win = mul_u64_u32_shr(tau4, SF_TIME, hwmon->scl_shift_time + x_w); if (val > max_win) -- cgit v1.3.1 From 9cb46b31f3d08ed3fce86349e8c12f96d7c88717 Mon Sep 17 00:00:00 2001 From: Himal Prasad Ghimiray Date: Mon, 1 Apr 2024 23:23:00 +0530 Subject: drm/xe/xe_migrate: Cast to output precision before multiplying operands Addressing potential overflow in result of multiplication of two lower precision (u32) operands before widening it to higher precision (u64). -v2 Fix commit message and description. (Rodrigo) Cc: Rodrigo Vivi Signed-off-by: Himal Prasad Ghimiray Reviewed-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.com Signed-off-by: Rodrigo Vivi (cherry picked from commit 34820967ae7b45411f8f4f737c2d63b0c608e0d7) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_migrate.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_migrate.c b/drivers/gpu/drm/xe/xe_migrate.c index ee1bb938c493..2ba4fb9511f6 100644 --- a/drivers/gpu/drm/xe/xe_migrate.c +++ b/drivers/gpu/drm/xe/xe_migrate.c @@ -227,7 +227,7 @@ static int xe_migrate_prepare_vm(struct xe_tile *tile, struct xe_migrate *m, if (vm->flags & XE_VM_FLAG_64K && level == 1) flags = XE_PDE_64K; - entry = vm->pt_ops->pde_encode_bo(bo, map_ofs + (level - 1) * + entry = vm->pt_ops->pde_encode_bo(bo, map_ofs + (u64)(level - 1) * XE_PAGE_SIZE, pat_index); xe_map_wr(xe, &bo->vmap, map_ofs + XE_PAGE_SIZE * level, u64, entry | flags); @@ -235,7 +235,7 @@ static int xe_migrate_prepare_vm(struct xe_tile *tile, struct xe_migrate *m, /* Write PDE's that point to our BO. */ for (i = 0; i < num_entries - num_level; i++) { - entry = vm->pt_ops->pde_encode_bo(bo, i * XE_PAGE_SIZE, + entry = vm->pt_ops->pde_encode_bo(bo, (u64)i * XE_PAGE_SIZE, pat_index); xe_map_wr(xe, &bo->vmap, map_ofs + XE_PAGE_SIZE + @@ -291,7 +291,7 @@ static int xe_migrate_prepare_vm(struct xe_tile *tile, struct xe_migrate *m, #define VM_SA_UPDATE_UNIT_SIZE (XE_PAGE_SIZE / NUM_VMUSA_UNIT_PER_PAGE) #define NUM_VMUSA_WRITES_PER_UNIT (VM_SA_UPDATE_UNIT_SIZE / sizeof(u64)) drm_suballoc_manager_init(&m->vm_update_sa, - (map_ofs / XE_PAGE_SIZE - NUM_KERNEL_PDE) * + (size_t)(map_ofs / XE_PAGE_SIZE - NUM_KERNEL_PDE) * NUM_VMUSA_UNIT_PER_PAGE, 0); m->pt_bo = bo; @@ -490,7 +490,7 @@ static void emit_pte(struct xe_migrate *m, struct xe_vm *vm = m->q->vm; u16 pat_index; u32 ptes; - u64 ofs = at_pt * XE_PAGE_SIZE; + u64 ofs = (u64)at_pt * XE_PAGE_SIZE; u64 cur_ofs; /* Indirect access needs compression enabled uncached PAT index */ -- cgit v1.3.1 From f76646c83f028c62853c23dac49204232e903597 Mon Sep 17 00:00:00 2001 From: Ashutosh Dixit Date: Thu, 4 Apr 2024 09:12:56 -0700 Subject: drm/xe: Label RING_CONTEXT_CONTROL as masked RING_CONTEXT_CONTROL is a masked register. v2: Also clean up setting register value (Lucas) Reviewed-by: Matt Roper Reviewed-by: Lucas De Marchi Signed-off-by: Ashutosh Dixit Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com (cherry picked from commit dc30c6e7149baaae4288c742de95212b31f07438) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/regs/xe_engine_regs.h | 2 +- drivers/gpu/drm/xe/xe_lrc.c | 5 ++--- 2 files changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/regs/xe_engine_regs.h b/drivers/gpu/drm/xe/regs/xe_engine_regs.h index 0b1266c88a6a..deddc8be48c0 100644 --- a/drivers/gpu/drm/xe/regs/xe_engine_regs.h +++ b/drivers/gpu/drm/xe/regs/xe_engine_regs.h @@ -125,7 +125,7 @@ #define RING_EXECLIST_STATUS_LO(base) XE_REG((base) + 0x234) #define RING_EXECLIST_STATUS_HI(base) XE_REG((base) + 0x234 + 4) -#define RING_CONTEXT_CONTROL(base) XE_REG((base) + 0x244) +#define RING_CONTEXT_CONTROL(base) XE_REG((base) + 0x244, XE_REG_OPTION_MASKED) #define CTX_CTRL_INHIBIT_SYN_CTX_SWITCH REG_BIT(3) #define CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT REG_BIT(0) diff --git a/drivers/gpu/drm/xe/xe_lrc.c b/drivers/gpu/drm/xe/xe_lrc.c index 1426febe86eb..57066faf575e 100644 --- a/drivers/gpu/drm/xe/xe_lrc.c +++ b/drivers/gpu/drm/xe/xe_lrc.c @@ -525,9 +525,8 @@ static const u8 *reg_offsets(struct xe_device *xe, enum xe_engine_class class) static void set_context_control(u32 *regs, struct xe_hw_engine *hwe) { - regs[CTX_CONTEXT_CONTROL] = _MASKED_BIT_ENABLE(CTX_CTRL_INHIBIT_SYN_CTX_SWITCH) | - _MASKED_BIT_DISABLE(CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT) | - CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT; + regs[CTX_CONTEXT_CONTROL] = _MASKED_BIT_ENABLE(CTX_CTRL_INHIBIT_SYN_CTX_SWITCH | + CTX_CTRL_ENGINE_CTX_RESTORE_INHIBIT); /* TODO: Timestamp */ } -- cgit v1.3.1 From 3b0daecfeac0103aba8b293df07a0cbaf8b43f29 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 12 Apr 2024 06:11:25 +1000 Subject: amdkfd: use calloc instead of kzalloc to avoid integer overflow This uses calloc instead of doing the multiplication which might overflow. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/amd/amdkfd/kfd_chardev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c index f9631f4b1a02..55aa74cbc532 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_chardev.c @@ -779,8 +779,8 @@ static int kfd_ioctl_get_process_apertures_new(struct file *filp, * nodes, but not more than args->num_of_nodes as that is * the amount of memory allocated by user */ - pa = kzalloc((sizeof(struct kfd_process_device_apertures) * - args->num_of_nodes), GFP_KERNEL); + pa = kcalloc(args->num_of_nodes, sizeof(struct kfd_process_device_apertures), + GFP_KERNEL); if (!pa) return -ENOMEM; -- cgit v1.3.1 From 84b1cec4fac5889b6d138d4b5ff6f2d5ef126c5e Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Thu, 4 Apr 2024 10:27:17 +0000 Subject: iommu/amd: Fix possible irq lock inversion dependency issue LOCKDEP detector reported below warning: ---------------------------------------- [ 23.796949] ======================================================== [ 23.796950] WARNING: possible irq lock inversion dependency detected [ 23.796952] 6.8.0fix+ #811 Not tainted [ 23.796954] -------------------------------------------------------- [ 23.796954] kworker/0:1/8 just changed the state of lock: [ 23.796956] ff365325e084a9b8 (&domain->lock){..-.}-{3:3}, at: amd_iommu_flush_iotlb_all+0x1f/0x50 [ 23.796969] but this lock took another, SOFTIRQ-unsafe lock in the past: [ 23.796970] (pd_bitmap_lock){+.+.}-{3:3} [ 23.796972] and interrupts could create inverse lock ordering between them. [ 23.796973] other info that might help us debug this: [ 23.796974] Chain exists of: &domain->lock --> &dev_data->lock --> pd_bitmap_lock [ 23.796980] Possible interrupt unsafe locking scenario: [ 23.796981] CPU0 CPU1 [ 23.796982] ---- ---- [ 23.796983] lock(pd_bitmap_lock); [ 23.796985] local_irq_disable(); [ 23.796985] lock(&domain->lock); [ 23.796988] lock(&dev_data->lock); [ 23.796990] [ 23.796991] lock(&domain->lock); Fix this issue by disabling interrupt when acquiring pd_bitmap_lock. Note that this is temporary fix. We have a plan to replace custom bitmap allocator with IDA allocator. Fixes: 87a6f1f22c97 ("iommu/amd: Introduce per-device domain ID to fix potential TLB aliasing issue") Reviewed-by: Suravee Suthikulpanit Signed-off-by: Vasant Hegde Link: https://lore.kernel.org/r/20240404102717.6705-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/iommu.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index d35c1b8c8e65..e692217fcb28 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -1692,26 +1692,29 @@ int amd_iommu_complete_ppr(struct pci_dev *pdev, u32 pasid, static u16 domain_id_alloc(void) { + unsigned long flags; int id; - spin_lock(&pd_bitmap_lock); + spin_lock_irqsave(&pd_bitmap_lock, flags); id = find_first_zero_bit(amd_iommu_pd_alloc_bitmap, MAX_DOMAIN_ID); BUG_ON(id == 0); if (id > 0 && id < MAX_DOMAIN_ID) __set_bit(id, amd_iommu_pd_alloc_bitmap); else id = 0; - spin_unlock(&pd_bitmap_lock); + spin_unlock_irqrestore(&pd_bitmap_lock, flags); return id; } static void domain_id_free(int id) { - spin_lock(&pd_bitmap_lock); + unsigned long flags; + + spin_lock_irqsave(&pd_bitmap_lock, flags); if (id > 0 && id < MAX_DOMAIN_ID) __clear_bit(id, amd_iommu_pd_alloc_bitmap); - spin_unlock(&pd_bitmap_lock); + spin_unlock_irqrestore(&pd_bitmap_lock, flags); } static void free_gcr3_tbl_level1(u64 *tbl) -- cgit v1.3.1 From b650b38b006053ef96e90b8e3f7e6edc7845cd57 Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Wed, 10 Apr 2024 08:57:02 +0000 Subject: iommu/amd: Do not enable SNP when V2 page table is enabled DTE[Mode]=0 is not supported when SNP is enabled in the host. That means to support SNP, IOMMU must be configured with V1 page table (See IOMMU spec [1] for the details). If user passes kernel command line to configure IOMMU domains with v2 page table (amd_iommu=pgtbl_v2) then disable SNP as the user asked by not forcing the page table to v1. [1] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/specifications/48882_IOMMU.pdf Cc: Ashish Kalra Cc: Michael Roth Cc: Tom Lendacky Signed-off-by: Vasant Hegde Reviewed-by: Tom Lendacky Link: https://lore.kernel.org/r/20240410085702.31869-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/init.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index 33228c1c8980..a714eb08c08b 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -3232,28 +3232,29 @@ static void iommu_snp_enable(void) return; /* * The SNP support requires that IOMMU must be enabled, and is - * not configured in the passthrough mode. + * configured with V1 page table (DTE[Mode] = 0 is not supported). */ if (no_iommu || iommu_default_passthrough()) { pr_err("SNP: IOMMU disabled or configured in passthrough mode, SNP cannot be supported.\n"); - cc_platform_clear(CC_ATTR_HOST_SEV_SNP); - return; + goto disable_snp; + } + + if (amd_iommu_pgtable != AMD_IOMMU_V1) { + pr_warn("SNP: IOMMU is configured with V2 page table mode, SNP cannot be supported.\n"); + goto disable_snp; } amd_iommu_snp_en = check_feature(FEATURE_SNP); if (!amd_iommu_snp_en) { pr_err("SNP: IOMMU SNP feature not enabled, SNP cannot be supported.\n"); - cc_platform_clear(CC_ATTR_HOST_SEV_SNP); - return; + goto disable_snp; } pr_info("IOMMU SNP support enabled.\n"); + return; - /* Enforce IOMMU v1 pagetable when SNP is enabled. */ - if (amd_iommu_pgtable != AMD_IOMMU_V1) { - pr_warn("Forcing use of AMD IOMMU v1 page table due to SNP.\n"); - amd_iommu_pgtable = AMD_IOMMU_V1; - } +disable_snp: + cc_platform_clear(CC_ATTR_HOST_SEV_SNP); #endif } -- cgit v1.3.1 From 7537e31df80cb58c27f3b6fef702534ea87a5957 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Apr 2024 18:41:09 +0200 Subject: iommu: mtk: fix module autoloading Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240410164109.233308-1-krzk@kernel.org Signed-off-by: Joerg Roedel --- drivers/iommu/mtk_iommu.c | 1 + drivers/iommu/mtk_iommu_v1.c | 1 + 2 files changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c index b8c47f18bc26..6a2707fe7a78 100644 --- a/drivers/iommu/mtk_iommu.c +++ b/drivers/iommu/mtk_iommu.c @@ -1790,6 +1790,7 @@ static const struct of_device_id mtk_iommu_of_ids[] = { { .compatible = "mediatek,mt8365-m4u", .data = &mt8365_data}, {} }; +MODULE_DEVICE_TABLE(of, mtk_iommu_of_ids); static struct platform_driver mtk_iommu_driver = { .probe = mtk_iommu_probe, diff --git a/drivers/iommu/mtk_iommu_v1.c b/drivers/iommu/mtk_iommu_v1.c index a9fa2a54dc9b..d6e4002200bd 100644 --- a/drivers/iommu/mtk_iommu_v1.c +++ b/drivers/iommu/mtk_iommu_v1.c @@ -600,6 +600,7 @@ static const struct of_device_id mtk_iommu_v1_of_ids[] = { { .compatible = "mediatek,mt2701-m4u", }, {} }; +MODULE_DEVICE_TABLE(of, mtk_iommu_v1_of_ids); static const struct component_master_ops mtk_iommu_v1_com_ops = { .bind = mtk_iommu_v1_bind, -- cgit v1.3.1 From 5b3625a4f6422e8982f90f0c11b5546149c962b8 Mon Sep 17 00:00:00 2001 From: Xuchun Shang Date: Thu, 11 Apr 2024 11:07:42 +0800 Subject: iommu/vt-d: Fix wrong use of pasid config The commit "iommu/vt-d: Add IOMMU perfmon support" introduce IOMMU PMU feature, but use the wrong config when set pasid filter. Fixes: 7232ab8b89e9 ("iommu/vt-d: Add IOMMU perfmon support") Signed-off-by: Xuchun Shang Reviewed-by: Kan Liang Link: https://lore.kernel.org/r/20240401060753.3321318-1-xuchun.shang@linux.alibaba.com Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel/perfmon.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel/perfmon.c b/drivers/iommu/intel/perfmon.c index cf43e798eca4..44083d01852d 100644 --- a/drivers/iommu/intel/perfmon.c +++ b/drivers/iommu/intel/perfmon.c @@ -438,7 +438,7 @@ static int iommu_pmu_assign_event(struct iommu_pmu *iommu_pmu, iommu_pmu_set_filter(domain, event->attr.config1, IOMMU_PMU_FILTER_DOMAIN, idx, event->attr.config1); - iommu_pmu_set_filter(pasid, event->attr.config1, + iommu_pmu_set_filter(pasid, event->attr.config2, IOMMU_PMU_FILTER_PASID, idx, event->attr.config1); iommu_pmu_set_filter(ats, event->attr.config2, -- cgit v1.3.1 From a34f3e20ddff02c4f12df2c0635367394e64c63d Mon Sep 17 00:00:00 2001 From: Jacob Pan Date: Thu, 11 Apr 2024 11:07:43 +0800 Subject: iommu/vt-d: Allocate local memory for page request queue The page request queue is per IOMMU, its allocation should be made NUMA-aware for performance reasons. Fixes: a222a7f0bb6c ("iommu/vt-d: Implement page request handling") Signed-off-by: Jacob Pan Reviewed-by: Kevin Tian Link: https://lore.kernel.org/r/20240403214007.985600-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu Signed-off-by: Joerg Roedel --- drivers/iommu/intel/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c index c1bed89b1026..ee3b469e2da1 100644 --- a/drivers/iommu/intel/svm.c +++ b/drivers/iommu/intel/svm.c @@ -66,7 +66,7 @@ int intel_svm_enable_prq(struct intel_iommu *iommu) struct page *pages; int irq, ret; - pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, PRQ_ORDER); + pages = alloc_pages_node(iommu->node, GFP_KERNEL | __GFP_ZERO, PRQ_ORDER); if (!pages) { pr_warn("IOMMU: %s: Failed to allocate page request queue\n", iommu->name); -- cgit v1.3.1 From 89436f4f54125b1297aec1f466efd8acb4ec613d Mon Sep 17 00:00:00 2001 From: Lu Baolu Date: Thu, 11 Apr 2024 11:07:44 +0800 Subject: iommu/vt-d: Fix WARN_ON in iommu probe path Commit 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") adds all devices probed by the iommu driver in a rbtree indexed by the source ID of each device. It assumes that each device has a unique source ID. This assumption is incorrect and the VT-d spec doesn't state this requirement either. The reason for using a rbtree to track devices is to look up the device with PCI bus and devfunc in the paths of handling ATS invalidation time out error and the PRI I/O page faults. Both are PCI ATS feature related. Only track the devices that have PCI ATS capabilities in the rbtree to avoid unnecessary WARN_ON in the iommu probe path. Otherwise, on some platforms below kernel splat will be displayed and the iommu probe results in failure. WARNING: CPU: 3 PID: 166 at drivers/iommu/intel/iommu.c:158 intel_iommu_probe_device+0x319/0xd90 Call Trace: ? __warn+0x7e/0x180 ? intel_iommu_probe_device+0x319/0xd90 ? report_bug+0x1f8/0x200 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x18/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? intel_iommu_probe_device+0x319/0xd90 ? debug_mutex_init+0x37/0x50 __iommu_probe_device+0xf2/0x4f0 iommu_probe_device+0x22/0x70 iommu_bus_notifier+0x1e/0x40 notifier_call_chain+0x46/0x150 blocking_notifier_call_chain+0x42/0x60 bus_notify+0x2f/0x50 device_add+0x5ed/0x7e0 platform_device_add+0xf5/0x240 mfd_add_devices+0x3f9/0x500 ? preempt_count_add+0x4c/0xa0 ? up_write+0xa2/0x1b0 ? __debugfs_create_file+0xe3/0x150 intel_lpss_probe+0x49f/0x5b0 ? pci_conf1_write+0xa3/0xf0 intel_lpss_pci_probe+0xcf/0x110 [intel_lpss_pci] pci_device_probe+0x95/0x120 really_probe+0xd9/0x370 ? __pfx___driver_attach+0x10/0x10 __driver_probe_device+0x73/0x150 driver_probe_device+0x19/0xa0 __driver_attach+0xb6/0x180 ? __pfx___driver_attach+0x10/0x10 bus_for_each_dev+0x77/0xd0 bus_add_driver+0x114/0x210 driver_register+0x5b/0x110 ? __pfx_intel_lpss_pci_driver_init+0x10/0x10 [intel_lpss_pci] do_one_initcall+0x57/0x2b0 ? kmalloc_trace+0x21e/0x280 ? do_init_module+0x1e/0x210 do_init_module+0x5f/0x210 load_module+0x1d37/0x1fc0 ? init_module_from_file+0x86/0xd0 init_module_from_file+0x86/0xd0 idempotent_init_module+0x17c/0x230 __x64_sys_finit_module+0x56/0xb0 do_syscall_64+0x6e/0x140 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fixes: 1a75cc710b95 ("iommu/vt-d: Use rbtree to track iommu probed devices") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10689 Signed-off-by: Lu Baolu Link: https://lore.kernel.org/r/20240407011429.136282-1-baolu.lu@linux.intel.com Reviewed-by: Kevin Tian Signed-off-by: Joerg Roedel --- drivers/iommu/intel/iommu.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c index 50eb9aed47cc..a7ecd90303dc 100644 --- a/drivers/iommu/intel/iommu.c +++ b/drivers/iommu/intel/iommu.c @@ -4299,9 +4299,11 @@ static struct iommu_device *intel_iommu_probe_device(struct device *dev) } dev_iommu_priv_set(dev, info); - ret = device_rbtree_insert(iommu, info); - if (ret) - goto free; + if (pdev && pci_ats_supported(pdev)) { + ret = device_rbtree_insert(iommu, info); + if (ret) + goto free; + } if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev)) { ret = intel_pasid_alloc_table(dev); @@ -4336,7 +4338,8 @@ static void intel_iommu_release_device(struct device *dev) struct intel_iommu *iommu = info->iommu; mutex_lock(&iommu->iopf_lock); - device_rbtree_remove(info); + if (dev_is_pci(dev) && pci_ats_supported(to_pci_dev(dev))) + device_rbtree_remove(info); mutex_unlock(&iommu->iopf_lock); if (sm_supported(iommu) && !dev_is_real_dma_subdevice(dev) && -- cgit v1.3.1 From b8246a2ad80a810cafbeddb30525278f9d64bca3 Mon Sep 17 00:00:00 2001 From: Vasant Hegde Date: Wed, 10 Apr 2024 10:16:43 +0000 Subject: iommu/amd: Change log message severity Use consistent log severity (pr_warn) to log all messages in SNP enable path. Suggested-by: Tom Lendacky Signed-off-by: Vasant Hegde Link: https://lore.kernel.org/r/20240410101643.32309-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel --- drivers/iommu/amd/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index a714eb08c08b..ac6754a85f35 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -3235,7 +3235,7 @@ static void iommu_snp_enable(void) * configured with V1 page table (DTE[Mode] = 0 is not supported). */ if (no_iommu || iommu_default_passthrough()) { - pr_err("SNP: IOMMU disabled or configured in passthrough mode, SNP cannot be supported.\n"); + pr_warn("SNP: IOMMU disabled or configured in passthrough mode, SNP cannot be supported.\n"); goto disable_snp; } @@ -3246,7 +3246,7 @@ static void iommu_snp_enable(void) amd_iommu_snp_en = check_feature(FEATURE_SNP); if (!amd_iommu_snp_en) { - pr_err("SNP: IOMMU SNP feature not enabled, SNP cannot be supported.\n"); + pr_warn("SNP: IOMMU SNP feature not enabled, SNP cannot be supported.\n"); goto disable_snp; } -- cgit v1.3.1 From 607638faf2ff1cede37458111496e7cc6c977f6f Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 10 Apr 2024 11:46:18 +0200 Subject: s390/qdio: handle deferred cc1 A deferred condition code 1 response indicates that I/O was not started and should be retried. The current QDIO implementation handles a cc1 response as I/O error, resulting in a failed QDIO setup. This can happen for example when a path verification request arrives at the same time as QDIO setup I/O is started. Fix this by retrying the QDIO setup I/O when a cc1 response is received. Note that since commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") commit 5ef1dc40ffa6 ("s390/cio: fix invalid -EBUSY on ccw_device_start") deferred cc1 responses are much more likely to occur. See the commit message of the latter for more background information. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reviewed-by: Alexandra Winter Signed-off-by: Peter Oberparleiter Signed-off-by: Alexander Gordeev --- drivers/s390/cio/qdio_main.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 3d9f0834c78b..a1cb39f4b7a2 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -722,8 +722,8 @@ static void qdio_handle_activate_check(struct qdio_irq *irq_ptr, lgr_info_log(); } -static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat, - int dstat) +static int qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat, + int dstat, int dcc) { DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qest irq"); @@ -731,15 +731,18 @@ static void qdio_establish_handle_irq(struct qdio_irq *irq_ptr, int cstat, goto error; if (dstat & ~(DEV_STAT_DEV_END | DEV_STAT_CHN_END)) goto error; + if (dcc == 1) + return -EAGAIN; if (!(dstat & DEV_STAT_DEV_END)) goto error; qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ESTABLISHED); - return; + return 0; error: DBF_ERROR("%4x EQ:error", irq_ptr->schid.sch_no); DBF_ERROR("ds: %2x cs:%2x", dstat, cstat); qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + return -EIO; } /* qdio interrupt handler */ @@ -748,7 +751,7 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, { struct qdio_irq *irq_ptr = cdev->private->qdio_data; struct subchannel_id schid; - int cstat, dstat; + int cstat, dstat, rc, dcc; if (!intparm || !irq_ptr) { ccw_device_get_schid(cdev, &schid); @@ -768,10 +771,12 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, qdio_irq_check_sense(irq_ptr, irb); cstat = irb->scsw.cmd.cstat; dstat = irb->scsw.cmd.dstat; + dcc = scsw_cmd_is_valid_cc(&irb->scsw) ? irb->scsw.cmd.cc : 0; + rc = 0; switch (irq_ptr->state) { case QDIO_IRQ_STATE_INACTIVE: - qdio_establish_handle_irq(irq_ptr, cstat, dstat); + rc = qdio_establish_handle_irq(irq_ptr, cstat, dstat, dcc); break; case QDIO_IRQ_STATE_CLEANUP: qdio_set_state(irq_ptr, QDIO_IRQ_STATE_INACTIVE); @@ -785,12 +790,25 @@ void qdio_int_handler(struct ccw_device *cdev, unsigned long intparm, if (cstat || dstat) qdio_handle_activate_check(irq_ptr, intparm, cstat, dstat); + else if (dcc == 1) + rc = -EAGAIN; break; case QDIO_IRQ_STATE_STOPPED: break; default: WARN_ON_ONCE(1); } + + if (rc == -EAGAIN) { + DBF_DEV_EVENT(DBF_INFO, irq_ptr, "qint retry"); + rc = ccw_device_start(cdev, irq_ptr->ccw, intparm, 0, 0); + if (!rc) + return; + DBF_ERROR("%4x RETRY ERR", irq_ptr->schid.sch_no); + DBF_ERROR("rc:%4x", rc); + qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR); + } + wake_up(&cdev->private->wait_q); } -- cgit v1.3.1 From 2d8527f2f911fab84aec04df4788c0c23af3df48 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 10 Apr 2024 11:46:19 +0200 Subject: s390/cio: fix race condition during online processing A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV. The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated. Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state. Note that since: commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring. Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Reviewed-by: Alexandra Winter Reviewed-by: Vineeth Vijayan Signed-off-by: Peter Oberparleiter Signed-off-by: Alexander Gordeev --- drivers/s390/cio/device.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index f95d12345d98..920f550bc313 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -363,10 +363,8 @@ int ccw_device_set_online(struct ccw_device *cdev) spin_lock_irq(cdev->ccwlock); ret = ccw_device_online(cdev); - spin_unlock_irq(cdev->ccwlock); - if (ret == 0) - wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev)); - else { + if (ret) { + spin_unlock_irq(cdev->ccwlock); CIO_MSG_EVENT(0, "ccw_device_online returned %d, " "device 0.%x.%04x\n", ret, cdev->private->dev_id.ssid, @@ -375,7 +373,12 @@ int ccw_device_set_online(struct ccw_device *cdev) put_device(&cdev->dev); return ret; } - spin_lock_irq(cdev->ccwlock); + /* Wait until a final state is reached */ + while (!dev_fsm_final_state(cdev)) { + spin_unlock_irq(cdev->ccwlock); + wait_event(cdev->private->wait_q, dev_fsm_final_state(cdev)); + spin_lock_irq(cdev->ccwlock); + } /* Check if online processing was successful */ if ((cdev->private->state != DEV_STATE_ONLINE) && (cdev->private->state != DEV_STATE_W4SENSE)) { -- cgit v1.3.1 From 6f76592ef63a1ffd8949f0828d24da7913ddb6d8 Mon Sep 17 00:00:00 2001 From: Peter Oberparleiter Date: Wed, 10 Apr 2024 11:46:20 +0200 Subject: s390/cio: log fake IRB events Add traces when queueing and delivering fake IRBs. These are significant events that might have an impact on device driver processing and are therefore relevant for problem analysis. Reviewed-by: Vineeth Vijayan Signed-off-by: Peter Oberparleiter Signed-off-by: Alexander Gordeev --- drivers/s390/cio/device_fsm.c | 5 +++++ drivers/s390/cio/device_ops.c | 8 ++++++++ 2 files changed, 13 insertions(+) (limited to 'drivers') diff --git a/drivers/s390/cio/device_fsm.c b/drivers/s390/cio/device_fsm.c index 65d8b2cfd626..42791fa0b80e 100644 --- a/drivers/s390/cio/device_fsm.c +++ b/drivers/s390/cio/device_fsm.c @@ -504,6 +504,11 @@ callback: ccw_device_done(cdev, DEV_STATE_ONLINE); /* Deliver fake irb to device driver, if needed. */ if (cdev->private->flags.fake_irb) { + CIO_MSG_EVENT(2, "fakeirb: deliver device 0.%x.%04x intparm %lx type=%d\n", + cdev->private->dev_id.ssid, + cdev->private->dev_id.devno, + cdev->private->intparm, + cdev->private->flags.fake_irb); create_fake_irb(&cdev->private->dma_area->irb, cdev->private->flags.fake_irb); cdev->private->flags.fake_irb = 0; diff --git a/drivers/s390/cio/device_ops.c b/drivers/s390/cio/device_ops.c index 40c97f873075..acd6790dba4d 100644 --- a/drivers/s390/cio/device_ops.c +++ b/drivers/s390/cio/device_ops.c @@ -208,6 +208,10 @@ int ccw_device_start_timeout_key(struct ccw_device *cdev, struct ccw1 *cpa, if (!cdev->private->flags.fake_irb) { cdev->private->flags.fake_irb = FAKE_CMD_IRB; cdev->private->intparm = intparm; + CIO_MSG_EVENT(2, "fakeirb: queue device 0.%x.%04x intparm %lx type=%d\n", + cdev->private->dev_id.ssid, + cdev->private->dev_id.devno, intparm, + cdev->private->flags.fake_irb); return 0; } else /* There's already a fake I/O around. */ @@ -551,6 +555,10 @@ int ccw_device_tm_start_timeout_key(struct ccw_device *cdev, struct tcw *tcw, if (!cdev->private->flags.fake_irb) { cdev->private->flags.fake_irb = FAKE_TM_IRB; cdev->private->intparm = intparm; + CIO_MSG_EVENT(2, "fakeirb: queue device 0.%x.%04x intparm %lx type=%d\n", + cdev->private->dev_id.ssid, + cdev->private->dev_id.devno, intparm, + cdev->private->flags.fake_irb); return 0; } else /* There's already a fake I/O around. */ -- cgit v1.3.1 From 11baa36d317321f5d54059f07d243c5a1dbbfbb2 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Wed, 10 Apr 2024 19:03:05 +0200 Subject: gpio: lpc32xx: fix module autoloading Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Krzysztof Kozlowski Signed-off-by: Bartosz Golaszewski --- drivers/gpio/gpio-lpc32xx.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 5ef8af824980..c097e310c9e8 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -529,6 +529,7 @@ static const struct of_device_id lpc32xx_gpio_of_match[] = { { .compatible = "nxp,lpc3220-gpio", }, { }, }; +MODULE_DEVICE_TABLE(of, lpc32xx_gpio_of_match); static struct platform_driver lpc32xx_gpio_driver = { .driver = { -- cgit v1.3.1 From 79336504781e7fee5ddaf046dcc186c8dfdf60b1 Mon Sep 17 00:00:00 2001 From: Damien Le Moal Date: Fri, 12 Apr 2024 08:41:15 +0900 Subject: ata: libata-scsi: Fix ata_scsi_dev_rescan() error path Commit 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") incorrectly handles failures of scsi_resume_device() in ata_scsi_dev_rescan(), leading to a double call to spin_unlock_irqrestore() to unlock a device port. Fix this by redefining the goto labels used in case of errors and only unlock the port scsi_scan_mutex when scsi_resume_device() fails. Bug found with the Smatch static checker warning: drivers/ata/libata-scsi.c:4774 ata_scsi_dev_rescan() error: double unlocked 'ap->lock' (orig line 4757) Reported-by: Dan Carpenter Fixes: 0c76106cb975 ("scsi: sd: Fix TCG OPAL unlock on system resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel --- drivers/ata/libata-scsi.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2f4c58837641..e954976891a9 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -4745,7 +4745,7 @@ void ata_scsi_dev_rescan(struct work_struct *work) * bail out. */ if (ap->pflags & ATA_PFLAG_SUSPENDED) - goto unlock; + goto unlock_ap; if (!sdev) continue; @@ -4758,7 +4758,7 @@ void ata_scsi_dev_rescan(struct work_struct *work) if (do_resume) { ret = scsi_resume_device(sdev); if (ret == -EWOULDBLOCK) - goto unlock; + goto unlock_scan; dev->flags &= ~ATA_DFLAG_RESUMING; } ret = scsi_rescan_device(sdev); @@ -4766,12 +4766,13 @@ void ata_scsi_dev_rescan(struct work_struct *work) spin_lock_irqsave(ap->lock, flags); if (ret) - goto unlock; + goto unlock_ap; } } -unlock: +unlock_ap: spin_unlock_irqrestore(ap->lock, flags); +unlock_scan: mutex_unlock(&ap->scsi_scan_mutex); /* Reschedule with a delay if scsi_rescan_device() returned an error */ -- cgit v1.3.1 From c0297e7dd50795d559f3534887a6de1756b35d0f Mon Sep 17 00:00:00 2001 From: Igor Pylypiv Date: Thu, 11 Apr 2024 20:12:24 +0000 Subject: ata: libata-core: Allow command duration limits detection for ACS-4 drives Even though the command duration limits (CDL) feature was first added in ACS-5 (major version 12), there are some ACS-4 (major version 11) drives that implement CDL as well. IDENTIFY_DEVICE, SUPPORTED_CAPABILITIES, and CURRENT_SETTINGS log pages are mandatory in the ACS-4 standard so it should be safe to read these log pages on older drives implementing the ACS-4 standard. Fixes: 62e4a60e0cdb ("scsi: ata: libata: Detect support for command duration limits") Cc: stable@vger.kernel.org Signed-off-by: Igor Pylypiv Signed-off-by: Damien Le Moal --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index be3412cdb22e..c449d60d9bb9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2539,7 +2539,7 @@ static void ata_dev_config_cdl(struct ata_device *dev) bool cdl_enabled; u64 val; - if (ata_id_major_version(dev->id) < 12) + if (ata_id_major_version(dev->id) < 11) goto not_supported; if (!ata_log_supported(dev, ATA_LOG_IDENTIFY_DEVICE) || -- cgit v1.3.1 From 68aba00483c7c4102429bcdfdece7289a8ab5c8e Mon Sep 17 00:00:00 2001 From: Asbjørn Sloth Tønnesen Date: Thu, 11 Apr 2024 11:13:18 +0000 Subject: net: sparx5: flower: fix fragment flags handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I noticed that only 3 out of the 4 input bits were used, mt.key->flags & FLOW_DIS_IS_FRAGMENT was never checked. In order to avoid a complicated maze, I converted it to use a 16 byte mapping table. As shown in the table below the old heuristics doesn't always do the right thing, ie. when FLOW_DIS_IS_FRAGMENT=1/1 then it used to only match follow-up fragment packets. Here are all the combinations, and their resulting new/old VCAP key/mask filter: /- FLOW_DIS_IS_FRAGMENT (key/mask) | /- FLOW_DIS_FIRST_FRAG (key/mask) | | /-- new VCAP fragment (key/mask) v v v v- old VCAP fragment (key/mask) 0/0 0/0 -/- -/- impossible (due to entry cond. on mask) 0/0 0/1 -/- 0/3 !! invalid (can't match non-fragment + follow-up frag) 0/0 1/0 -/- -/- impossible (key > mask) 0/0 1/1 1/3 1/3 first fragment 0/1 0/0 0/3 3/3 !! not fragmented 0/1 0/1 0/3 3/3 !! not fragmented (+ not first fragment) 0/1 1/0 -/- -/- impossible (key > mask) 0/1 1/1 -/- 1/3 !! invalid (non-fragment and first frag) 1/0 0/0 -/- -/- impossible (key > mask) 1/0 0/1 -/- -/- impossible (key > mask) 1/0 1/0 -/- -/- impossible (key > mask) 1/0 1/1 -/- -/- impossible (key > mask) 1/1 0/0 1/1 3/3 !! some fragment 1/1 0/1 3/3 3/3 follow-up fragment 1/1 1/0 -/- -/- impossible (key > mask) 1/1 1/1 1/3 1/3 first fragment In the datasheet the VCAP fragment values are documented as: 0 = no fragment 1 = initial fragment 2 = suspicious fragment 3 = valid follow-up fragment Result: 3 combinations match the old behavior, 3 combinations have been corrected, 2 combinations are now invalid, and fail, 8 combinations are impossible. It should now be aligned with how FLOW_DIS_IS_FRAGMENT and FLOW_DIS_FIRST_FRAG is set in __skb_flow_dissect() in net/core/flow_dissector.c Since the VCAP fragment values are not a bitfield, we have to ignore the suspicious fragment value, eg. when matching on any kind of fragment with FLOW_DIS_IS_FRAGMENT=1/1. Only compile tested, and logic tested in userspace, as I unfortunately don't have access to this switch chip (yet). Fixes: d6c2964db3fe ("net: microchip: sparx5: Adding more tc flower keys for the IS2 VCAP") Signed-off-by: Asbjørn Sloth Tønnesen Reviewed-by: Steen Hegelund Tested-by: Daniel Machon Reviewed-by: Jacob Keller Link: https://lore.kernel.org/r/20240411111321.114095-1-ast@fiberby.net Signed-off-by: Jakub Kicinski --- .../ethernet/microchip/sparx5/sparx5_tc_flower.c | 61 ++++++++++++++-------- 1 file changed, 40 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c b/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c index 523e0c470894..55f255a3c9db 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_tc_flower.c @@ -36,6 +36,27 @@ struct sparx5_tc_flower_template { u16 l3_proto; /* protocol specified in the template */ }; +/* SparX-5 VCAP fragment types: + * 0 = no fragment, 1 = initial fragment, + * 2 = suspicious fragment, 3 = valid follow-up fragment + */ +enum { /* key / mask */ + FRAG_NOT = 0x03, /* 0 / 3 */ + FRAG_SOME = 0x11, /* 1 / 1 */ + FRAG_FIRST = 0x13, /* 1 / 3 */ + FRAG_LATER = 0x33, /* 3 / 3 */ + FRAG_INVAL = 0xff, /* invalid */ +}; + +/* Flower fragment flag to VCAP fragment type mapping */ +static const u8 sparx5_vcap_frag_map[4][4] = { /* is_frag */ + { FRAG_INVAL, FRAG_INVAL, FRAG_INVAL, FRAG_FIRST }, /* 0/0 */ + { FRAG_NOT, FRAG_NOT, FRAG_INVAL, FRAG_INVAL }, /* 0/1 */ + { FRAG_INVAL, FRAG_INVAL, FRAG_INVAL, FRAG_INVAL }, /* 1/0 */ + { FRAG_SOME, FRAG_LATER, FRAG_INVAL, FRAG_FIRST } /* 1/1 */ + /* 0/0 0/1 1/0 1/1 <-- first_frag */ +}; + static int sparx5_tc_flower_es0_tpid(struct vcap_tc_flower_parse_usage *st) { @@ -145,29 +166,27 @@ sparx5_tc_flower_handler_control_usage(struct vcap_tc_flower_parse_usage *st) flow_rule_match_control(st->frule, &mt); if (mt.mask->flags) { - if (mt.mask->flags & FLOW_DIS_FIRST_FRAG) { - if (mt.key->flags & FLOW_DIS_FIRST_FRAG) { - value = 1; /* initial fragment */ - mask = 0x3; - } else { - if (mt.mask->flags & FLOW_DIS_IS_FRAGMENT) { - value = 3; /* follow up fragment */ - mask = 0x3; - } else { - value = 0; /* no fragment */ - mask = 0x3; - } - } - } else { - if (mt.mask->flags & FLOW_DIS_IS_FRAGMENT) { - value = 3; /* follow up fragment */ - mask = 0x3; - } else { - value = 0; /* no fragment */ - mask = 0x3; - } + u8 is_frag_key = !!(mt.key->flags & FLOW_DIS_IS_FRAGMENT); + u8 is_frag_mask = !!(mt.mask->flags & FLOW_DIS_IS_FRAGMENT); + u8 is_frag_idx = (is_frag_key << 1) | is_frag_mask; + + u8 first_frag_key = !!(mt.key->flags & FLOW_DIS_FIRST_FRAG); + u8 first_frag_mask = !!(mt.mask->flags & FLOW_DIS_FIRST_FRAG); + u8 first_frag_idx = (first_frag_key << 1) | first_frag_mask; + + /* Lookup verdict based on the 2 + 2 input bits */ + u8 vdt = sparx5_vcap_frag_map[is_frag_idx][first_frag_idx]; + + if (vdt == FRAG_INVAL) { + NL_SET_ERR_MSG_MOD(st->fco->common.extack, + "Match on invalid fragment flag combination"); + return -EINVAL; } + /* Extract VCAP fragment key and mask from verdict */ + value = (vdt >> 4) & 0x3; + mask = vdt & 0x3; + err = vcap_rule_add_key_u32(st->vrule, VCAP_KF_L3_FRAGMENT_TYPE, value, mask); -- cgit v1.3.1 From 37cc10da3a50e6d0cb9808a90b7da9b4868794dd Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Thu, 11 Apr 2024 14:54:39 +0300 Subject: net/mlx5: Lag, restore buckets number to default after hash LAG deactivation The cited patch introduces the concept of buckets in LAG in hash mode. However, the patch doesn't clear the number of buckets in the LAG deactivation. This results in using the wrong number of buckets in case user create a hash mode LAG and afterwards create a non-hash mode LAG. Hence, restore buckets number to default after hash mode LAG deactivation. Fixes: 352899f384d4 ("net/mlx5: Lag, use buckets in hash mode") Signed-off-by: Shay Drory Reviewed-by: Maor Gottlieb Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240411115444.374475-2-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c index d14459e5c04f..69d482f7c5a2 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c @@ -703,8 +703,10 @@ int mlx5_deactivate_lag(struct mlx5_lag *ldev) return err; } - if (test_bit(MLX5_LAG_MODE_FLAG_HASH_BASED, &flags)) + if (test_bit(MLX5_LAG_MODE_FLAG_HASH_BASED, &flags)) { mlx5_lag_port_sel_destroy(ldev); + ldev->buckets = 1; + } if (mlx5_lag_has_drop_rule(ldev)) mlx5_lag_drop_rule_cleanup(ldev); -- cgit v1.3.1 From aa4ac90d04f4371466000825adb44935ecb5c974 Mon Sep 17 00:00:00 2001 From: Tariq Toukan Date: Thu, 11 Apr 2024 14:54:40 +0300 Subject: net/mlx5: SD, Handle possible devcom ERR_PTR Check if devcom holds an error pointer and return immediately. This fixes Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c:221 sd_register() error: 'devcom' dereferencing possible ERR_PTR() Enhance mlx5_devcom_register_component() so it stops returning NULL, making it easier for its callers. Fixes: d3d057666090 ("net/mlx5: SD, Implement devcom communication and primary election") Reported-by: Dan Carpenter Link: https://lore.kernel.org/all/f09666c8-e604-41f6-958b-4cc55c73faf9@gmail.com/T/ Signed-off-by: Tariq Toukan Reviewed-by: Gal Pressman Link: https://lore.kernel.org/r/20240411115444.374475-3-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c | 2 +- drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c | 4 ++-- drivers/net/ethernet/mellanox/mlx5/core/main.c | 2 +- 5 files changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c index b375ef268671..319930c04093 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c @@ -209,8 +209,8 @@ static int mlx5e_devcom_init_mpv(struct mlx5e_priv *priv, u64 *data) *data, mlx5e_devcom_event_mpv, priv); - if (IS_ERR_OR_NULL(priv->devcom)) - return -EOPNOTSUPP; + if (IS_ERR(priv->devcom)) + return PTR_ERR(priv->devcom); if (mlx5_core_is_mp_master(priv->mdev)) { mlx5_devcom_send_event(priv->devcom, MPV_DEVCOM_MASTER_UP, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c index 1f60954c12f7..844d3e3a65dd 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c @@ -3060,7 +3060,7 @@ void mlx5_esw_offloads_devcom_init(struct mlx5_eswitch *esw, u64 key) key, mlx5_esw_offloads_devcom_event, esw); - if (IS_ERR_OR_NULL(esw->devcom)) + if (IS_ERR(esw->devcom)) return; mlx5_devcom_send_event(esw->devcom, diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c index e7d59cfa8708..7b0766c89f4c 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/devcom.c @@ -220,7 +220,7 @@ mlx5_devcom_register_component(struct mlx5_devcom_dev *devc, struct mlx5_devcom_comp *comp; if (IS_ERR_OR_NULL(devc)) - return NULL; + return ERR_PTR(-EINVAL); mutex_lock(&comp_list_lock); comp = devcom_component_get(devc, id, key, handler); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c b/drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c index 5b28084e8a03..dd5d186dc614 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lib/sd.c @@ -213,8 +213,8 @@ static int sd_register(struct mlx5_core_dev *dev) sd = mlx5_get_sd(dev); devcom = mlx5_devcom_register_component(dev->priv.devc, MLX5_DEVCOM_SD_GROUP, sd->group_id, NULL, dev); - if (!devcom) - return -ENOMEM; + if (IS_ERR(devcom)) + return PTR_ERR(devcom); sd->devcom = devcom; diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index 59806553889e..a39c4b25ba28 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -956,7 +956,7 @@ static void mlx5_register_hca_devcom_comp(struct mlx5_core_dev *dev) mlx5_devcom_register_component(dev->priv.devc, MLX5_DEVCOM_HCA_PORTS, mlx5_query_nic_system_image_guid(dev), NULL, dev); - if (IS_ERR_OR_NULL(dev->priv.hca_devcom_comp)) + if (IS_ERR(dev->priv.hca_devcom_comp)) mlx5_core_err(dev, "Failed to register devcom HCA component\n"); } -- cgit v1.3.1 From bf729988303a27833a86acb561f42b9a3cc12728 Mon Sep 17 00:00:00 2001 From: Shay Drory Date: Thu, 11 Apr 2024 14:54:41 +0300 Subject: net/mlx5: Restore mistakenly dropped parts in register devlink flow Code parts from cited commit were mistakenly dropped while rebasing before submission. Add them here. Fixes: c6e77aa9dd82 ("net/mlx5: Register devlink first under devlink lock") Signed-off-by: Shay Drory Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240411115444.374475-4-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/main.c | 5 ++++- drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c | 1 - 2 files changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/main.c b/drivers/net/ethernet/mellanox/mlx5/core/main.c index a39c4b25ba28..331ce47f51a1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/main.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/main.c @@ -1699,12 +1699,15 @@ int mlx5_init_one_light(struct mlx5_core_dev *dev) err = mlx5_devlink_params_register(priv_to_devlink(dev)); if (err) { mlx5_core_warn(dev, "mlx5_devlink_param_reg err = %d\n", err); - goto query_hca_caps_err; + goto params_reg_err; } devl_unlock(devlink); return 0; +params_reg_err: + devl_unregister(devlink); + devl_unlock(devlink); query_hca_caps_err: devl_unregister(devlink); devl_unlock(devlink); diff --git a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c index e3bf8c7e4baa..7ebe71280827 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/sf/dev/driver.c @@ -75,7 +75,6 @@ static int mlx5_sf_dev_probe(struct auxiliary_device *adev, const struct auxilia goto peer_devlink_set_err; } - devlink_register(devlink); return 0; peer_devlink_set_err: -- cgit v1.3.1 From 6c685bdb9e1af966ec0278dbd4068ec39ae88c2d Mon Sep 17 00:00:00 2001 From: Rahul Rameshbabu Date: Thu, 11 Apr 2024 14:54:42 +0300 Subject: net/mlx5e: Use channel mdev reference instead of global mdev instance for coalescing Channels can potentially have independent mdev instances. Do not refer to the global mdev instance in the mlx5e_priv instance for channel FW operations related to coalescing. CQ numbers that would be valid on the channel's mdev instance may not be correctly referenced if using the mlx5e_priv instance. Fixes: 67936e138586 ("net/mlx5e: Let channels be SD-aware") Signed-off-by: Rahul Rameshbabu Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240411115444.374475-5-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c index 8f101181648c..67a29826bb57 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c @@ -589,12 +589,12 @@ static int mlx5e_get_coalesce(struct net_device *netdev, static void mlx5e_set_priv_channels_tx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) { - struct mlx5_core_dev *mdev = priv->mdev; int tc; int i; for (i = 0; i < priv->channels.num; ++i) { struct mlx5e_channel *c = priv->channels.c[i]; + struct mlx5_core_dev *mdev = c->mdev; for (tc = 0; tc < c->num_tc; tc++) { mlx5_core_modify_cq_moderation(mdev, @@ -608,11 +608,11 @@ mlx5e_set_priv_channels_tx_coalesce(struct mlx5e_priv *priv, struct ethtool_coal static void mlx5e_set_priv_channels_rx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal) { - struct mlx5_core_dev *mdev = priv->mdev; int i; for (i = 0; i < priv->channels.num; ++i) { struct mlx5e_channel *c = priv->channels.c[i]; + struct mlx5_core_dev *mdev = c->mdev; mlx5_core_modify_cq_moderation(mdev, &c->rq.cq.mcq, coal->rx_coalesce_usecs, -- cgit v1.3.1 From fdce06bda7e56b2a34c53ea58bad7af2fae96da1 Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Thu, 11 Apr 2024 14:54:43 +0300 Subject: net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation netif_queue_set_napi asserts whether RTNL lock is held if the netdev is initialized. Acquire the RTNL lock before activating or deactivating RQs/SQs if the lock has not been held before in the flow. Fixes: f25e7b82635f ("net/mlx5e: link NAPI instances to queues and IRQs") Cc: Joe Damato Signed-off-by: Carolina Jubran Reviewed-by: Rahul Rameshbabu Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240411115444.374475-6-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c index 0ab9db319530..22918b2ef7f1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en/reporter_tx.c @@ -108,7 +108,10 @@ static int mlx5e_tx_reporter_err_cqe_recover(void *ctx) mlx5e_reset_txqsq_cc_pc(sq); sq->stats->recover++; clear_bit(MLX5E_SQ_STATE_RECOVERING, &sq->state); + rtnl_lock(); mlx5e_activate_txqsq(sq); + rtnl_unlock(); + if (sq->channel) mlx5e_trigger_napi_icosq(sq->channel); else @@ -179,12 +182,16 @@ static int mlx5e_tx_reporter_ptpsq_unhealthy_recover(void *ctx) carrier_ok = netif_carrier_ok(netdev); netif_carrier_off(netdev); + rtnl_lock(); mlx5e_deactivate_priv_channels(priv); + rtnl_unlock(); mlx5e_ptp_close(chs->ptp); err = mlx5e_ptp_open(priv, &chs->params, chs->c[0]->lag_port, &chs->ptp); + rtnl_lock(); mlx5e_activate_priv_channels(priv); + rtnl_unlock(); /* return carrier back if needed */ if (carrier_ok) -- cgit v1.3.1 From fef965764cf562f28afb997b626fc7c3cec99693 Mon Sep 17 00:00:00 2001 From: Carolina Jubran Date: Thu, 11 Apr 2024 14:54:44 +0300 Subject: net/mlx5e: Prevent deadlock while disabling aRFS When disabling aRFS under the `priv->state_lock`, any scheduled aRFS works are canceled using the `cancel_work_sync` function, which waits for the work to end if it has already started. However, while waiting for the work handler, the handler will try to acquire the `state_lock` which is already acquired. The worker acquires the lock to delete the rules if the state is down, which is not the worker's responsibility since disabling aRFS deletes the rules. Add an aRFS state variable, which indicates whether the aRFS is enabled and prevent adding rules when the aRFS is disabled. Kernel log: ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Tainted: G I ------------------------------------------------------ ethtool/386089 is trying to acquire lock: ffff88810f21ce68 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}, at: __flush_work+0x74/0x4e0 but task is already holding lock: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&priv->state_lock){+.+.}-{3:3}: __mutex_lock+0x80/0xc90 arfs_handle_work+0x4b/0x3b0 [mlx5_core] process_one_work+0x1dc/0x4a0 worker_thread+0x1bf/0x3c0 kthread+0xd7/0x100 ret_from_fork+0x2d/0x50 ret_from_fork_asm+0x11/0x20 -> #0 ((work_completion)(&rule->arfs_work)){+.+.}-{0:0}: __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 __flush_work+0x7a/0x4e0 __cancel_work_timer+0x131/0x1c0 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); lock(&priv->state_lock); lock((work_completion)(&rule->arfs_work)); *** DEADLOCK *** 3 locks held by ethtool/386089: #0: ffffffff82ea7210 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 #1: ffffffff82e94c88 (rtnl_mutex){+.+.}-{3:3}, at: ethnl_default_set_doit+0xd3/0x240 #2: ffff8884a1808cc0 (&priv->state_lock){+.+.}-{3:3}, at: mlx5e_ethtool_set_channels+0x53/0x200 [mlx5_core] stack backtrace: CPU: 15 PID: 386089 Comm: ethtool Tainted: G I 6.7.0-rc4_net_next_mlx5_5483eb2 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack_lvl+0x60/0xa0 check_noncircular+0x144/0x160 __lock_acquire+0x17b4/0x2c80 lock_acquire+0xd0/0x2b0 ? __flush_work+0x74/0x4e0 ? save_trace+0x3e/0x360 ? __flush_work+0x74/0x4e0 __flush_work+0x7a/0x4e0 ? __flush_work+0x74/0x4e0 ? __lock_acquire+0xa78/0x2c80 ? lock_acquire+0xd0/0x2b0 ? mark_held_locks+0x49/0x70 __cancel_work_timer+0x131/0x1c0 ? mark_held_locks+0x49/0x70 arfs_del_rules+0x143/0x1e0 [mlx5_core] mlx5e_arfs_disable+0x1b/0x30 [mlx5_core] mlx5e_ethtool_set_channels+0xcb/0x200 [mlx5_core] ethnl_set_channels+0x28f/0x3b0 ethnl_default_set_doit+0xec/0x240 genl_family_rcv_msg_doit+0xd0/0x120 genl_rcv_msg+0x188/0x2c0 ? ethnl_ops_begin+0xb0/0xb0 ? genl_family_rcv_msg_dumpit+0xf0/0xf0 netlink_rcv_skb+0x54/0x100 genl_rcv+0x24/0x40 netlink_unicast+0x1a1/0x270 netlink_sendmsg+0x214/0x460 __sock_sendmsg+0x38/0x60 __sys_sendto+0x113/0x170 ? do_user_addr_fault+0x53f/0x8f0 __x64_sys_sendto+0x20/0x30 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x46/0x4e Fixes: 45bf454ae884 ("net/mlx5e: Enabling aRFS mechanism") Signed-off-by: Carolina Jubran Signed-off-by: Tariq Toukan Link: https://lore.kernel.org/r/20240411115444.374475-7-tariqt@nvidia.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c | 27 ++++++++++++++--------- 1 file changed, 16 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c index c7f542d0b8f0..93cf23278d93 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c @@ -46,6 +46,10 @@ struct arfs_table { struct hlist_head rules_hash[ARFS_HASH_SIZE]; }; +enum { + MLX5E_ARFS_STATE_ENABLED, +}; + enum arfs_type { ARFS_IPV4_TCP, ARFS_IPV6_TCP, @@ -60,6 +64,7 @@ struct mlx5e_arfs_tables { spinlock_t arfs_lock; int last_filter_id; struct workqueue_struct *wq; + unsigned long state; }; struct arfs_tuple { @@ -170,6 +175,8 @@ int mlx5e_arfs_enable(struct mlx5e_flow_steering *fs) return err; } } + set_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state); + return 0; } @@ -455,6 +462,8 @@ static void arfs_del_rules(struct mlx5e_flow_steering *fs) int i; int j; + clear_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state); + spin_lock_bh(&arfs->arfs_lock); mlx5e_for_each_arfs_rule(rule, htmp, arfs->arfs_tables, i, j) { hlist_del_init(&rule->hlist); @@ -627,17 +636,8 @@ static void arfs_handle_work(struct work_struct *work) struct mlx5_flow_handle *rule; arfs = mlx5e_fs_get_arfs(priv->fs); - mutex_lock(&priv->state_lock); - if (!test_bit(MLX5E_STATE_OPENED, &priv->state)) { - spin_lock_bh(&arfs->arfs_lock); - hlist_del(&arfs_rule->hlist); - spin_unlock_bh(&arfs->arfs_lock); - - mutex_unlock(&priv->state_lock); - kfree(arfs_rule); - goto out; - } - mutex_unlock(&priv->state_lock); + if (!test_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state)) + return; if (!arfs_rule->rule) { rule = arfs_add_rule(priv, arfs_rule); @@ -753,6 +753,11 @@ int mlx5e_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb, return -EPROTONOSUPPORT; spin_lock_bh(&arfs->arfs_lock); + if (!test_bit(MLX5E_ARFS_STATE_ENABLED, &arfs->state)) { + spin_unlock_bh(&arfs->arfs_lock); + return -EPERM; + } + arfs_rule = arfs_find_rule(arfs_t, &fk); if (arfs_rule) { if (arfs_rule->rxq == rxq_index || work_busy(&arfs_rule->arfs_work)) { -- cgit v1.3.1 From 8541323285994528ad5be2c1bdc759e6c83b936e Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Thu, 4 Apr 2024 21:05:14 -0300 Subject: iommufd: Add missing IOMMUFD_DRIVER kconfig for the selftest Some kconfigs don't automatically include this symbol which results in sub functions for some of the dirty tracking related things that are non-functional. Thus the test suite will fail. select IOMMUFD_DRIVER in the IOMMUFD_TEST kconfig to fix it. Fixes: a9af47e382a4 ("iommufd/selftest: Test IOMMU_HWPT_GET_DIRTY_BITMAP") Link: https://lore.kernel.org/r/20240327182050.GA1363414@ziepe.ca Tested-by: Muhammad Usama Anjum Signed-off-by: Jason Gunthorpe --- drivers/iommu/iommufd/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iommu/iommufd/Kconfig b/drivers/iommu/iommufd/Kconfig index 99d4b075df49..76656fe0470d 100644 --- a/drivers/iommu/iommufd/Kconfig +++ b/drivers/iommu/iommufd/Kconfig @@ -37,6 +37,7 @@ config IOMMUFD_TEST depends on DEBUG_KERNEL depends on FAULT_INJECTION depends on RUNTIME_TESTING_MENU + select IOMMUFD_DRIVER default n help This is dangerous, do not enable unless running -- cgit v1.3.1 From 356952b13af5b2c338df1e06889fd1b5e12cbbf4 Mon Sep 17 00:00:00 2001 From: bolan wang Date: Wed, 6 Mar 2024 19:03:39 +0800 Subject: USB: serial: option: add Fibocom FM135-GL variants Update the USB serial option driver support for the Fibocom FM135-GL LTE modules. - VID:PID 2cb7:0115, FM135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: mbim, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0115 Rev=05.15 S: Manufacturer=Fibocom Wireless Inc. S: Product=Fibocom Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: bolan wang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 55a65d941ccb..cedf93a3eaea 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2272,6 +2272,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0xff, 0x30) }, /* Fibocom FG150 Diag */ { USB_DEVICE_AND_INTERFACE_INFO(0x2cb7, 0x010b, 0xff, 0, 0) }, /* Fibocom FG150 AT */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0111, 0xff) }, /* Fibocom FM160 (MBIM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0115, 0xff), /* Fibocom FM135 (laptop MBIM) */ + .driver_info = RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a0, 0xff) }, /* Fibocom NL668-AM/NL652-EU (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a2, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ -- cgit v1.3.1 From c840244aba7ad2b83ed904378b36bd6aef25511c Mon Sep 17 00:00:00 2001 From: Jerry Meng Date: Mon, 15 Apr 2024 15:04:29 +0800 Subject: USB: serial: option: support Quectel EM060K sub-models EM060K_129, EM060K_12a, EM060K_12b and EM0060K_12c are EM060K's sub-models, having the same name "Quectel EM060K-GL" and the same interface layout. MBIM + GNSS + DIAG + NMEA + AT + QDSS + DPL T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0129 Rev= 5.04 S: Manufacturer=Quectel S: Product=Quectel EM060K-GL S: SerialNumber=f6fa08b6 C:* #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 7 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=8f(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jerry Meng Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cedf93a3eaea..16cf0ddaae9b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -255,6 +255,10 @@ static void option_instat_callback(struct urb *urb); #define QUECTEL_PRODUCT_EM061K_LMS 0x0124 #define QUECTEL_PRODUCT_EC25 0x0125 #define QUECTEL_PRODUCT_EM060K_128 0x0128 +#define QUECTEL_PRODUCT_EM060K_129 0x0129 +#define QUECTEL_PRODUCT_EM060K_12a 0x012a +#define QUECTEL_PRODUCT_EM060K_12b 0x012b +#define QUECTEL_PRODUCT_EM060K_12c 0x012c #define QUECTEL_PRODUCT_EG91 0x0191 #define QUECTEL_PRODUCT_EG95 0x0195 #define QUECTEL_PRODUCT_BG96 0x0296 @@ -1218,6 +1222,18 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_128, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_129, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12a, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12b, 0xff, 0xff, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x30) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0x00, 0x40) }, + { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K_12c, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0x00, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM061K_LCN, 0xff, 0xff, 0x40) }, -- cgit v1.3.1 From fff1386cc889d8fb4089d285f883f8cba62d82ce Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 11 Apr 2024 11:15:09 +1000 Subject: nouveau: fix instmem race condition around ptr stores Running a lot of VK CTS in parallel against nouveau, once every few hours you might see something like this crash. BUG: kernel NULL pointer dereference, address: 0000000000000008 PGD 8000000114e6e067 P4D 8000000114e6e067 PUD 109046067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 7 PID: 53891 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 RIP: 0010:gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] Code: c7 48 01 c8 49 89 45 58 85 d2 0f 84 95 00 00 00 41 0f b7 46 12 49 8b 7e 08 89 da 42 8d 2c f8 48 8b 47 08 41 83 c7 01 48 89 ee <48> 8b 40 08 ff d0 0f 1f 00 49 8b 7e 08 48 89 d9 48 8d 75 04 48 c1 RSP: 0000:ffffac20c5857838 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000004d8001 RCX: 0000000000000001 RDX: 00000000004d8001 RSI: 00000000000006d8 RDI: ffffa07afe332180 RBP: 00000000000006d8 R08: ffffac20c5857ad0 R09: 0000000000ffff10 R10: 0000000000000001 R11: ffffa07af27e2de0 R12: 000000000000001c R13: ffffac20c5857ad0 R14: ffffa07a96fe9040 R15: 000000000000001c FS: 00007fe395eed7c0(0000) GS:ffffa07e2c980000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000008 CR3: 000000011febe001 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ... ? gp100_vmm_pgt_mem+0xe3/0x180 [nouveau] ? gp100_vmm_pgt_mem+0x37/0x180 [nouveau] nvkm_vmm_iter+0x351/0xa20 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] ? __lock_acquire+0x3ed/0x2170 ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_ptes_get_map+0xc2/0x100 [nouveau] ? __pfx_nvkm_vmm_ref_ptes+0x10/0x10 [nouveau] ? __pfx_gp100_vmm_pgt_mem+0x10/0x10 [nouveau] nvkm_vmm_map_locked+0x224/0x3a0 [nouveau] Adding any sort of useful debug usually makes it go away, so I hand wrote the function in a line, and debugged the asm. Every so often pt->memory->ptrs is NULL. This ptrs ptr is set in the nv50_instobj_acquire called from nvkm_kmap. If Thread A and Thread B both get to nv50_instobj_acquire around the same time, and Thread A hits the refcount_set line, and in lockstep thread B succeeds at refcount_inc_not_zero, there is a chance the ptrs value won't have been stored since refcount_set is unordered. Force a memory barrier here, I picked smp_mb, since we want it on all CPUs and it's write followed by a read. v2: use paired smp_rmb/smp_wmb. Cc: Fixes: be55287aa5ba ("drm/nouveau/imem/nv50: embed nvkm_instobj directly into nv04_instobj") Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240411011510.2546857-1-airlied@gmail.com --- drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c index a7f3fc342d87..dd5b5a17ece0 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/instmem/nv50.c @@ -222,8 +222,11 @@ nv50_instobj_acquire(struct nvkm_memory *memory) void __iomem *map = NULL; /* Already mapped? */ - if (refcount_inc_not_zero(&iobj->maps)) + if (refcount_inc_not_zero(&iobj->maps)) { + /* read barrier match the wmb on refcount set */ + smp_rmb(); return iobj->map; + } /* Take the lock, and re-check that another thread hasn't * already mapped the object in the meantime. @@ -250,6 +253,8 @@ nv50_instobj_acquire(struct nvkm_memory *memory) iobj->base.memory.ptrs = &nv50_instobj_fast; else iobj->base.memory.ptrs = &nv50_instobj_slow; + /* barrier to ensure the ptrs are written before refcount is set */ + smp_wmb(); refcount_set(&iobj->maps, 1); } -- cgit v1.3.1 From cf92bb778eda7830e79452c6917efa8474a30c1e Mon Sep 17 00:00:00 2001 From: Mikhail Kobuk Date: Thu, 11 Apr 2024 14:08:52 +0300 Subject: drm: nv04: Fix out of bounds access When Output Resource (dcb->or) value is assigned in fabricate_dcb_output(), there may be out of bounds access to dac_users array in case dcb->or is zero because ffs(dcb->or) is used as index there. The 'or' argument of fabricate_dcb_output() must be interpreted as a number of bit to set, not value. Utilize macros from 'enum nouveau_or' in calls instead of hardcoding. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2e5702aff395 ("drm/nouveau: fabricate DCB encoder table for iMac G4") Fixes: 670820c0e6a9 ("drm/nouveau: Workaround incorrect DCB entry on a GeForce3 Ti 200.") Signed-off-by: Mikhail Kobuk Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20240411110854.16701-1-m.kobuk@ispras.ru --- drivers/gpu/drm/nouveau/nouveau_bios.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 479effcf607e..79cfab53f80e 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -23,6 +23,7 @@ */ #include "nouveau_drv.h" +#include "nouveau_bios.h" #include "nouveau_reg.h" #include "dispnv04/hw.h" #include "nouveau_encoder.h" @@ -1677,7 +1678,7 @@ apply_dcb_encoder_quirks(struct drm_device *dev, int idx, u32 *conn, u32 *conf) */ if (nv_match_device(dev, 0x0201, 0x1462, 0x8851)) { if (*conn == 0xf2005014 && *conf == 0xffffffff) { - fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, 1); + fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 1, 1, DCB_OUTPUT_B); return false; } } @@ -1763,26 +1764,26 @@ fabricate_dcb_encoder_table(struct drm_device *dev, struct nvbios *bios) #ifdef __powerpc__ /* Apple iMac G4 NV17 */ if (of_machine_is_compatible("PowerMac4,5")) { - fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, 1); - fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, 2); + fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, 0, all_heads, DCB_OUTPUT_B); + fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, 1, all_heads, DCB_OUTPUT_C); return; } #endif /* Make up some sane defaults */ fabricate_dcb_output(dcb, DCB_OUTPUT_ANALOG, - bios->legacy.i2c_indices.crt, 1, 1); + bios->legacy.i2c_indices.crt, 1, DCB_OUTPUT_B); if (nv04_tv_identify(dev, bios->legacy.i2c_indices.tv) >= 0) fabricate_dcb_output(dcb, DCB_OUTPUT_TV, bios->legacy.i2c_indices.tv, - all_heads, 0); + all_heads, DCB_OUTPUT_A); else if (bios->tmds.output0_script_ptr || bios->tmds.output1_script_ptr) fabricate_dcb_output(dcb, DCB_OUTPUT_TMDS, bios->legacy.i2c_indices.panel, - all_heads, 1); + all_heads, DCB_OUTPUT_B); } static int -- cgit v1.3.1 From 75ce9506ee3dc66648a7d74ab3b0acfa364d6d43 Mon Sep 17 00:00:00 2001 From: Asbjørn Sloth Tønnesen Date: Fri, 12 Apr 2024 12:02:56 +0000 Subject: octeontx2-pf: fix FLOW_DIS_IS_FRAGMENT implementation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Upon reviewing the flower control flags handling in this driver, I notice that the key wasn't being used, only the mask. Ie. `tc flower ... ip_flags nofrag` was hardware offloaded as `... ip_flags frag`. Only compile tested, no access to HW. Fixes: c672e3727989 ("octeontx2-pf: Add support to filter packet based on IP fragment") Signed-off-by: Asbjørn Sloth Tønnesen Reviewed-by: Jacob Keller Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c index 87bdb93cb066..f4655a8c0705 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c @@ -689,6 +689,7 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node, if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_CONTROL)) { struct flow_match_control match; + u32 val; flow_rule_match_control(rule, &match); if (match.mask->flags & FLOW_DIS_FIRST_FRAG) { @@ -697,12 +698,14 @@ static int otx2_tc_prepare_flow(struct otx2_nic *nic, struct otx2_tc_flow *node, } if (match.mask->flags & FLOW_DIS_IS_FRAGMENT) { + val = match.key->flags & FLOW_DIS_IS_FRAGMENT; if (ntohs(flow_spec->etype) == ETH_P_IP) { - flow_spec->ip_flag = IPV4_FLAG_MORE; + flow_spec->ip_flag = val ? IPV4_FLAG_MORE : 0; flow_mask->ip_flag = IPV4_FLAG_MORE; req->features |= BIT_ULL(NPC_IPFRAG_IPV4); } else if (ntohs(flow_spec->etype) == ETH_P_IPV6) { - flow_spec->next_header = IPPROTO_FRAGMENT; + flow_spec->next_header = val ? + IPPROTO_FRAGMENT : 0; flow_mask->next_header = 0xff; req->features |= BIT_ULL(NPC_IPFRAG_IPV6); } else { -- cgit v1.3.1 From b6976f323a8687cc0d55bc92c2086fd934324ed5 Mon Sep 17 00:00:00 2001 From: Christian König Date: Mon, 15 Apr 2024 15:48:21 +0200 Subject: drm/ttm: stop pooling cached NUMA pages v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We only pool write combined and uncached allocations because they require extra overhead on allocation and release. If we also pool cached NUMA it not only means some extra unnecessary overhead, but also that under memory pressure it can happen that pages from the wrong NUMA node enters the pool and are re-used over and over again. This can lead to performance reduction after running into memory pressure. v2: restructure and cleanup the code a bit from the internal hack to test this. Signed-off-by: Christian König Fixes: 4482d3c94d7f ("drm/ttm: add NUMA node id to the pool") CC: stable@vger.kernel.org Reviewed-by: Felix Kuehling Link: https://patchwork.freedesktop.org/patch/msgid/20240415134821.1919-1-christian.koenig@amd.com --- drivers/gpu/drm/ttm/ttm_pool.c | 38 ++++++++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/ttm/ttm_pool.c b/drivers/gpu/drm/ttm/ttm_pool.c index 112438d965ff..6e1fd6985ffc 100644 --- a/drivers/gpu/drm/ttm/ttm_pool.c +++ b/drivers/gpu/drm/ttm/ttm_pool.c @@ -288,17 +288,23 @@ static struct ttm_pool_type *ttm_pool_select_type(struct ttm_pool *pool, enum ttm_caching caching, unsigned int order) { - if (pool->use_dma_alloc || pool->nid != NUMA_NO_NODE) + if (pool->use_dma_alloc) return &pool->caching[caching].orders[order]; #ifdef CONFIG_X86 switch (caching) { case ttm_write_combined: + if (pool->nid != NUMA_NO_NODE) + return &pool->caching[caching].orders[order]; + if (pool->use_dma32) return &global_dma32_write_combined[order]; return &global_write_combined[order]; case ttm_uncached: + if (pool->nid != NUMA_NO_NODE) + return &pool->caching[caching].orders[order]; + if (pool->use_dma32) return &global_dma32_uncached[order]; @@ -566,11 +572,17 @@ void ttm_pool_init(struct ttm_pool *pool, struct device *dev, pool->use_dma_alloc = use_dma_alloc; pool->use_dma32 = use_dma32; - if (use_dma_alloc || nid != NUMA_NO_NODE) { - for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i) - for (j = 0; j < NR_PAGE_ORDERS; ++j) - ttm_pool_type_init(&pool->caching[i].orders[j], - pool, i, j); + for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i) { + for (j = 0; j < NR_PAGE_ORDERS; ++j) { + struct ttm_pool_type *pt; + + /* Initialize only pool types which are actually used */ + pt = ttm_pool_select_type(pool, i, j); + if (pt != &pool->caching[i].orders[j]) + continue; + + ttm_pool_type_init(pt, pool, i, j); + } } } EXPORT_SYMBOL(ttm_pool_init); @@ -599,10 +611,16 @@ void ttm_pool_fini(struct ttm_pool *pool) { unsigned int i, j; - if (pool->use_dma_alloc || pool->nid != NUMA_NO_NODE) { - for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i) - for (j = 0; j < NR_PAGE_ORDERS; ++j) - ttm_pool_type_fini(&pool->caching[i].orders[j]); + for (i = 0; i < TTM_NUM_CACHING_TYPES; ++i) { + for (j = 0; j < NR_PAGE_ORDERS; ++j) { + struct ttm_pool_type *pt; + + pt = ttm_pool_select_type(pool, i, j); + if (pt != &pool->caching[i].orders[j]) + continue; + + ttm_pool_type_fini(pt); + } } /* We removed the pool types from the LRU, but we need to also make sure -- cgit v1.3.1 From a2ac1cbc5397eb4e400efa66c3337886d9a63026 Mon Sep 17 00:00:00 2001 From: Raag Jadav Date: Mon, 15 Apr 2024 13:10:51 +0530 Subject: pwm: dwc: allow suspend/resume for 16 channels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit With 16 channel pwm support, we're registering two instances of pwm_chip with 8 channels each. We need to update PM functions to use both instances of pwm_chip during power state transitions. Introduce struct dwc_pwm_drvdata and use it as driver_data, which will maintain both instances of pwm_chip along with dwc_pwm_info and allow us to use them inside suspend/resume handles. Fixes: ebf2c89eb95e ("pwm: dwc: Add 16 channel support for Intel Elkhart Lake") Signed-off-by: Raag Jadav Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20240415074051.14681-1-raag.jadav@intel.com Signed-off-by: Uwe Kleine-König --- drivers/pwm/pwm-dwc-core.c | 1 - drivers/pwm/pwm-dwc.c | 88 ++++++++++++++++++++++++++++++---------------- drivers/pwm/pwm-dwc.h | 6 ++++ 3 files changed, 63 insertions(+), 32 deletions(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-dwc-core.c b/drivers/pwm/pwm-dwc-core.c index 043736972cb9..c8425493b95d 100644 --- a/drivers/pwm/pwm-dwc-core.c +++ b/drivers/pwm/pwm-dwc-core.c @@ -172,7 +172,6 @@ struct pwm_chip *dwc_pwm_alloc(struct device *dev) dwc->clk_ns = 10; chip->ops = &dwc_pwm_ops; - dev_set_drvdata(dev, chip); return chip; } EXPORT_SYMBOL_GPL(dwc_pwm_alloc); diff --git a/drivers/pwm/pwm-dwc.c b/drivers/pwm/pwm-dwc.c index 676eaf8d7a53..fb3eadf6fbc4 100644 --- a/drivers/pwm/pwm-dwc.c +++ b/drivers/pwm/pwm-dwc.c @@ -31,26 +31,34 @@ static const struct dwc_pwm_info ehl_pwm_info = { .size = 0x1000, }; -static int dwc_pwm_init_one(struct device *dev, void __iomem *base, unsigned int offset) +static int dwc_pwm_init_one(struct device *dev, struct dwc_pwm_drvdata *ddata, unsigned int idx) { struct pwm_chip *chip; struct dwc_pwm *dwc; + int ret; chip = dwc_pwm_alloc(dev); if (IS_ERR(chip)) return PTR_ERR(chip); dwc = to_dwc_pwm(chip); - dwc->base = base + offset; + dwc->base = ddata->io_base + (ddata->info->size * idx); - return devm_pwmchip_add(dev, chip); + ret = devm_pwmchip_add(dev, chip); + if (ret) + return ret; + + ddata->chips[idx] = chip; + return 0; } static int dwc_pwm_probe(struct pci_dev *pci, const struct pci_device_id *id) { const struct dwc_pwm_info *info; struct device *dev = &pci->dev; - int i, ret; + struct dwc_pwm_drvdata *ddata; + unsigned int idx; + int ret; ret = pcim_enable_device(pci); if (ret) @@ -63,17 +71,25 @@ static int dwc_pwm_probe(struct pci_dev *pci, const struct pci_device_id *id) return dev_err_probe(dev, ret, "Failed to iomap PCI BAR\n"); info = (const struct dwc_pwm_info *)id->driver_data; - - for (i = 0; i < info->nr; i++) { - /* - * No need to check for pcim_iomap_table() failure, - * pcim_iomap_regions() already does it for us. - */ - ret = dwc_pwm_init_one(dev, pcim_iomap_table(pci)[0], i * info->size); + ddata = devm_kzalloc(dev, struct_size(ddata, chips, info->nr), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + /* + * No need to check for pcim_iomap_table() failure, + * pcim_iomap_regions() already does it for us. + */ + ddata->io_base = pcim_iomap_table(pci)[0]; + ddata->info = info; + + for (idx = 0; idx < ddata->info->nr; idx++) { + ret = dwc_pwm_init_one(dev, ddata, idx); if (ret) return ret; } + dev_set_drvdata(dev, ddata); + pm_runtime_put(dev); pm_runtime_allow(dev); @@ -88,19 +104,24 @@ static void dwc_pwm_remove(struct pci_dev *pci) static int dwc_pwm_suspend(struct device *dev) { - struct pwm_chip *chip = dev_get_drvdata(dev); - struct dwc_pwm *dwc = to_dwc_pwm(chip); - int i; - - for (i = 0; i < DWC_TIMERS_TOTAL; i++) { - if (chip->pwms[i].state.enabled) { - dev_err(dev, "PWM %u in use by consumer (%s)\n", - i, chip->pwms[i].label); - return -EBUSY; + struct dwc_pwm_drvdata *ddata = dev_get_drvdata(dev); + unsigned int idx; + + for (idx = 0; idx < ddata->info->nr; idx++) { + struct pwm_chip *chip = ddata->chips[idx]; + struct dwc_pwm *dwc = to_dwc_pwm(chip); + unsigned int i; + + for (i = 0; i < DWC_TIMERS_TOTAL; i++) { + if (chip->pwms[i].state.enabled) { + dev_err(dev, "PWM %u in use by consumer (%s)\n", + i, chip->pwms[i].label); + return -EBUSY; + } + dwc->ctx[i].cnt = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(i)); + dwc->ctx[i].cnt2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(i)); + dwc->ctx[i].ctrl = dwc_pwm_readl(dwc, DWC_TIM_CTRL(i)); } - dwc->ctx[i].cnt = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT(i)); - dwc->ctx[i].cnt2 = dwc_pwm_readl(dwc, DWC_TIM_LD_CNT2(i)); - dwc->ctx[i].ctrl = dwc_pwm_readl(dwc, DWC_TIM_CTRL(i)); } return 0; @@ -108,14 +129,19 @@ static int dwc_pwm_suspend(struct device *dev) static int dwc_pwm_resume(struct device *dev) { - struct pwm_chip *chip = dev_get_drvdata(dev); - struct dwc_pwm *dwc = to_dwc_pwm(chip); - int i; - - for (i = 0; i < DWC_TIMERS_TOTAL; i++) { - dwc_pwm_writel(dwc, dwc->ctx[i].cnt, DWC_TIM_LD_CNT(i)); - dwc_pwm_writel(dwc, dwc->ctx[i].cnt2, DWC_TIM_LD_CNT2(i)); - dwc_pwm_writel(dwc, dwc->ctx[i].ctrl, DWC_TIM_CTRL(i)); + struct dwc_pwm_drvdata *ddata = dev_get_drvdata(dev); + unsigned int idx; + + for (idx = 0; idx < ddata->info->nr; idx++) { + struct pwm_chip *chip = ddata->chips[idx]; + struct dwc_pwm *dwc = to_dwc_pwm(chip); + unsigned int i; + + for (i = 0; i < DWC_TIMERS_TOTAL; i++) { + dwc_pwm_writel(dwc, dwc->ctx[i].cnt, DWC_TIM_LD_CNT(i)); + dwc_pwm_writel(dwc, dwc->ctx[i].cnt2, DWC_TIM_LD_CNT2(i)); + dwc_pwm_writel(dwc, dwc->ctx[i].ctrl, DWC_TIM_CTRL(i)); + } } return 0; diff --git a/drivers/pwm/pwm-dwc.h b/drivers/pwm/pwm-dwc.h index a8b074841ae8..c6e2df5a6122 100644 --- a/drivers/pwm/pwm-dwc.h +++ b/drivers/pwm/pwm-dwc.h @@ -38,6 +38,12 @@ struct dwc_pwm_info { unsigned int size; }; +struct dwc_pwm_drvdata { + const struct dwc_pwm_info *info; + void __iomem *io_base; + struct pwm_chip *chips[]; +}; + struct dwc_pwm_ctx { u32 cnt; u32 cnt2; -- cgit v1.3.1 From b32233accefff1338806f064fb9b62cf5bc0609f Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Thu, 11 Apr 2024 22:55:09 -0400 Subject: drm/vmwgfx: Fix prime import/export vmwgfx never supported prime import of external buffers. Furthermore the driver exposes two different objects to userspace: vmw_surface's and gem buffers but prime import/export only worked with vmw_surfaces. Because gem buffers are used through the dumb_buffer interface this meant that the driver created buffers couldn't have been prime exported or imported. Fix prime import/export. Makes IGT's kms_prime pass. Signed-off-by: Zack Rusin Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM") Cc: # v6.6+ Reviewed-by: Martin Krastev Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-4-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_blit.c | 35 ++++++++++++++++++++++-- drivers/gpu/drm/vmwgfx/vmwgfx_bo.c | 7 +++-- drivers/gpu/drm/vmwgfx/vmwgfx_bo.h | 2 ++ drivers/gpu/drm/vmwgfx/vmwgfx_drv.c | 1 + drivers/gpu/drm/vmwgfx/vmwgfx_drv.h | 3 ++ drivers/gpu/drm/vmwgfx/vmwgfx_gem.c | 32 ++++++++++++++++++++++ drivers/gpu/drm/vmwgfx/vmwgfx_prime.c | 15 ++++++++-- drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c | 44 ++++++++++++++++++++---------- 8 files changed, 117 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c b/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c index c52c7bf1485b..717d624e9a05 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_blit.c @@ -456,8 +456,10 @@ int vmw_bo_cpu_blit(struct ttm_buffer_object *dst, .no_wait_gpu = false }; u32 j, initial_line = dst_offset / dst_stride; - struct vmw_bo_blit_line_data d; + struct vmw_bo_blit_line_data d = {0}; int ret = 0; + struct page **dst_pages = NULL; + struct page **src_pages = NULL; /* Buffer objects need to be either pinned or reserved: */ if (!(dst->pin_count)) @@ -477,12 +479,35 @@ int vmw_bo_cpu_blit(struct ttm_buffer_object *dst, return ret; } + if (!src->ttm->pages && src->ttm->sg) { + src_pages = kvmalloc_array(src->ttm->num_pages, + sizeof(struct page *), GFP_KERNEL); + if (!src_pages) + return -ENOMEM; + ret = drm_prime_sg_to_page_array(src->ttm->sg, src_pages, + src->ttm->num_pages); + if (ret) + goto out; + } + if (!dst->ttm->pages && dst->ttm->sg) { + dst_pages = kvmalloc_array(dst->ttm->num_pages, + sizeof(struct page *), GFP_KERNEL); + if (!dst_pages) { + ret = -ENOMEM; + goto out; + } + ret = drm_prime_sg_to_page_array(dst->ttm->sg, dst_pages, + dst->ttm->num_pages); + if (ret) + goto out; + } + d.mapped_dst = 0; d.mapped_src = 0; d.dst_addr = NULL; d.src_addr = NULL; - d.dst_pages = dst->ttm->pages; - d.src_pages = src->ttm->pages; + d.dst_pages = dst->ttm->pages ? dst->ttm->pages : dst_pages; + d.src_pages = src->ttm->pages ? src->ttm->pages : src_pages; d.dst_num_pages = PFN_UP(dst->resource->size); d.src_num_pages = PFN_UP(src->resource->size); d.dst_prot = ttm_io_prot(dst, dst->resource, PAGE_KERNEL); @@ -504,6 +529,10 @@ out: kunmap_atomic(d.src_addr); if (d.dst_addr) kunmap_atomic(d.dst_addr); + if (src_pages) + kvfree(src_pages); + if (dst_pages) + kvfree(dst_pages); return ret; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c index bfd41ce3c8f4..e5eb21a471a6 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.c @@ -377,7 +377,8 @@ static int vmw_bo_init(struct vmw_private *dev_priv, { struct ttm_operation_ctx ctx = { .interruptible = params->bo_type != ttm_bo_type_kernel, - .no_wait_gpu = false + .no_wait_gpu = false, + .resv = params->resv, }; struct ttm_device *bdev = &dev_priv->bdev; struct drm_device *vdev = &dev_priv->drm; @@ -394,8 +395,8 @@ static int vmw_bo_init(struct vmw_private *dev_priv, vmw_bo_placement_set(vmw_bo, params->domain, params->busy_domain); ret = ttm_bo_init_reserved(bdev, &vmw_bo->tbo, params->bo_type, - &vmw_bo->placement, 0, &ctx, NULL, - NULL, destroy); + &vmw_bo->placement, 0, &ctx, + params->sg, params->resv, destroy); if (unlikely(ret)) return ret; diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h index 0d496dc9c6af..f349642e6190 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_bo.h @@ -55,6 +55,8 @@ struct vmw_bo_params { enum ttm_bo_type bo_type; size_t size; bool pin; + struct dma_resv *resv; + struct sg_table *sg; }; /** diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 0a304706e013..58fb40c93100 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -1628,6 +1628,7 @@ static const struct drm_driver driver = { .prime_fd_to_handle = vmw_prime_fd_to_handle, .prime_handle_to_fd = vmw_prime_handle_to_fd, + .gem_prime_import_sg_table = vmw_prime_import_sg_table, .fops = &vmwgfx_driver_fops, .name = VMWGFX_DRIVER_NAME, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index 12efecc17df6..b019a1a1787a 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -1130,6 +1130,9 @@ extern int vmw_prime_handle_to_fd(struct drm_device *dev, struct drm_file *file_priv, uint32_t handle, uint32_t flags, int *prime_fd); +struct drm_gem_object *vmw_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *table); /* * MemoryOBject management - vmwgfx_mob.c diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c index 12787bb9c111..d6bcaf078b1f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_gem.c @@ -149,6 +149,38 @@ out_no_bo: return ret; } +struct drm_gem_object *vmw_prime_import_sg_table(struct drm_device *dev, + struct dma_buf_attachment *attach, + struct sg_table *table) +{ + int ret; + struct vmw_private *dev_priv = vmw_priv(dev); + struct drm_gem_object *gem = NULL; + struct vmw_bo *vbo; + struct vmw_bo_params params = { + .domain = (dev_priv->has_mob) ? VMW_BO_DOMAIN_SYS : VMW_BO_DOMAIN_VRAM, + .busy_domain = VMW_BO_DOMAIN_SYS, + .bo_type = ttm_bo_type_sg, + .size = attach->dmabuf->size, + .pin = false, + .resv = attach->dmabuf->resv, + .sg = table, + + }; + + dma_resv_lock(params.resv, NULL); + + ret = vmw_bo_create(dev_priv, ¶ms, &vbo); + if (ret != 0) + goto out_no_bo; + + vbo->tbo.base.funcs = &vmw_gem_object_funcs; + + gem = &vbo->tbo.base; +out_no_bo: + dma_resv_unlock(params.resv); + return gem; +} int vmw_gem_object_create_ioctl(struct drm_device *dev, void *data, struct drm_file *filp) diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c b/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c index 2d72a5ee7c0c..c99cad444991 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_prime.c @@ -75,8 +75,12 @@ int vmw_prime_fd_to_handle(struct drm_device *dev, int fd, u32 *handle) { struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; + int ret = ttm_prime_fd_to_handle(tfile, fd, handle); - return ttm_prime_fd_to_handle(tfile, fd, handle); + if (ret) + ret = drm_gem_prime_fd_to_handle(dev, file_priv, fd, handle); + + return ret; } int vmw_prime_handle_to_fd(struct drm_device *dev, @@ -85,5 +89,12 @@ int vmw_prime_handle_to_fd(struct drm_device *dev, int *prime_fd) { struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; - return ttm_prime_handle_to_fd(tfile, handle, flags, prime_fd); + int ret; + + if (handle > VMWGFX_NUM_MOB) + ret = ttm_prime_handle_to_fd(tfile, handle, flags, prime_fd); + else + ret = drm_gem_prime_handle_to_fd(dev, file_priv, handle, flags, prime_fd); + + return ret; } diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c index 4d23d0a70bcb..621d98b376bb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_ttm_buffer.c @@ -188,13 +188,18 @@ static int vmw_ttm_map_dma(struct vmw_ttm_tt *vmw_tt) switch (dev_priv->map_mode) { case vmw_dma_map_bind: case vmw_dma_map_populate: - vsgt->sgt = &vmw_tt->sgt; - ret = sg_alloc_table_from_pages_segment( - &vmw_tt->sgt, vsgt->pages, vsgt->num_pages, 0, - (unsigned long)vsgt->num_pages << PAGE_SHIFT, - dma_get_max_seg_size(dev_priv->drm.dev), GFP_KERNEL); - if (ret) - goto out_sg_alloc_fail; + if (vmw_tt->dma_ttm.page_flags & TTM_TT_FLAG_EXTERNAL) { + vsgt->sgt = vmw_tt->dma_ttm.sg; + } else { + vsgt->sgt = &vmw_tt->sgt; + ret = sg_alloc_table_from_pages_segment(&vmw_tt->sgt, + vsgt->pages, vsgt->num_pages, 0, + (unsigned long)vsgt->num_pages << PAGE_SHIFT, + dma_get_max_seg_size(dev_priv->drm.dev), + GFP_KERNEL); + if (ret) + goto out_sg_alloc_fail; + } ret = vmw_ttm_map_for_dma(vmw_tt); if (unlikely(ret != 0)) @@ -209,8 +214,9 @@ static int vmw_ttm_map_dma(struct vmw_ttm_tt *vmw_tt) return 0; out_map_fail: - sg_free_table(vmw_tt->vsgt.sgt); - vmw_tt->vsgt.sgt = NULL; + drm_warn(&dev_priv->drm, "VSG table map failed!"); + sg_free_table(vsgt->sgt); + vsgt->sgt = NULL; out_sg_alloc_fail: return ret; } @@ -356,15 +362,17 @@ static void vmw_ttm_destroy(struct ttm_device *bdev, struct ttm_tt *ttm) static int vmw_ttm_populate(struct ttm_device *bdev, struct ttm_tt *ttm, struct ttm_operation_ctx *ctx) { - int ret; + bool external = (ttm->page_flags & TTM_TT_FLAG_EXTERNAL) != 0; - /* TODO: maybe completely drop this ? */ if (ttm_tt_is_populated(ttm)) return 0; - ret = ttm_pool_alloc(&bdev->pool, ttm, ctx); + if (external && ttm->sg) + return drm_prime_sg_to_dma_addr_array(ttm->sg, + ttm->dma_address, + ttm->num_pages); - return ret; + return ttm_pool_alloc(&bdev->pool, ttm, ctx); } static void vmw_ttm_unpopulate(struct ttm_device *bdev, @@ -372,6 +380,10 @@ static void vmw_ttm_unpopulate(struct ttm_device *bdev, { struct vmw_ttm_tt *vmw_tt = container_of(ttm, struct vmw_ttm_tt, dma_ttm); + bool external = (ttm->page_flags & TTM_TT_FLAG_EXTERNAL) != 0; + + if (external) + return; vmw_ttm_unbind(bdev, ttm); @@ -390,6 +402,7 @@ static struct ttm_tt *vmw_ttm_tt_create(struct ttm_buffer_object *bo, { struct vmw_ttm_tt *vmw_be; int ret; + bool external = bo->type == ttm_bo_type_sg; vmw_be = kzalloc(sizeof(*vmw_be), GFP_KERNEL); if (!vmw_be) @@ -398,7 +411,10 @@ static struct ttm_tt *vmw_ttm_tt_create(struct ttm_buffer_object *bo, vmw_be->dev_priv = vmw_priv_from_ttm(bo->bdev); vmw_be->mob = NULL; - if (vmw_be->dev_priv->map_mode == vmw_dma_alloc_coherent) + if (external) + page_flags |= TTM_TT_FLAG_EXTERNAL | TTM_TT_FLAG_EXTERNAL_MAPPABLE; + + if (vmw_be->dev_priv->map_mode == vmw_dma_alloc_coherent || external) ret = ttm_sg_tt_init(&vmw_be->dma_ttm, bo, page_flags, ttm_cached); else -- cgit v1.3.1 From a60ccade88f926e871a57176e86a34bbf0db0098 Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Thu, 11 Apr 2024 22:55:10 -0400 Subject: drm/vmwgfx: Fix crtc's atomic check conditional The conditional was supposed to prevent enabling of a crtc state without a set primary plane. Accidently it also prevented disabling crtc state with a set primary plane. Neither is correct. Fix the conditional and just driver-warn when a crtc state has been enabled without a primary plane which will help debug broken userspace. Fixes IGT's kms_atomic_interruptible and kms_atomic_transition tests. Signed-off-by: Zack Rusin Fixes: 06ec41909e31 ("drm/vmwgfx: Add and connect CRTC helper functions") Cc: Broadcom internal kernel review list Cc: dri-devel@lists.freedesktop.org Cc: # v4.12+ Reviewed-by: Ian Forbes Reviewed-by: Martin Krastev Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-5-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c index cd4925346ed4..84ae4e10a2eb 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.c @@ -933,6 +933,7 @@ int vmw_du_cursor_plane_atomic_check(struct drm_plane *plane, int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, struct drm_atomic_state *state) { + struct vmw_private *vmw = vmw_priv(crtc->dev); struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc); struct vmw_display_unit *du = vmw_crtc_to_du(new_state->crtc); @@ -940,9 +941,13 @@ int vmw_du_crtc_atomic_check(struct drm_crtc *crtc, bool has_primary = new_state->plane_mask & drm_plane_mask(crtc->primary); - /* We always want to have an active plane with an active CRTC */ - if (has_primary != new_state->enable) - return -EINVAL; + /* + * This is fine in general, but broken userspace might expect + * some actual rendering so give a clue as why it's blank. + */ + if (new_state->enable && !has_primary) + drm_dbg_driver(&vmw->drm, + "CRTC without a primary plane will be blank.\n"); if (new_state->connector_mask != connector_mask && -- cgit v1.3.1 From d4c972bff3129a9dd4c22a3999fd8eba1a81531a Mon Sep 17 00:00:00 2001 From: Zack Rusin Date: Thu, 11 Apr 2024 22:55:11 -0400 Subject: drm/vmwgfx: Sort primary plane formats by order of preference The table of primary plane formats wasn't sorted at all, leading to applications picking our least desirable formats by defaults. Sort the primary plane formats according to our order of preference. Nice side-effect of this change is that it makes IGT's kms_atomic plane-invalid-params pass because the test picks the first format which for vmwgfx was DRM_FORMAT_XRGB1555 and uses fb's with odd sizes which make Pixman, which IGT depends on assert due to the fact that our 16bpp formats aren't 32 bit aligned like Pixman requires all formats to be. Signed-off-by: Zack Rusin Fixes: 36cc79bc9077 ("drm/vmwgfx: Add universal plane support") Cc: Broadcom internal kernel review list Cc: dri-devel@lists.freedesktop.org Cc: # v4.12+ Acked-by: Pekka Paalanen Link: https://patchwork.freedesktop.org/patch/msgid/20240412025511.78553-6-zack.rusin@broadcom.com --- drivers/gpu/drm/vmwgfx/vmwgfx_kms.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h index a94947b588e8..19a843da87b7 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_kms.h @@ -243,10 +243,10 @@ struct vmw_framebuffer_bo { static const uint32_t __maybe_unused vmw_primary_plane_formats[] = { - DRM_FORMAT_XRGB1555, - DRM_FORMAT_RGB565, DRM_FORMAT_XRGB8888, DRM_FORMAT_ARGB8888, + DRM_FORMAT_RGB565, + DRM_FORMAT_XRGB1555, }; static const uint32_t __maybe_unused vmw_cursor_plane_formats[] = { -- cgit v1.3.1 From 35f4f8c9fc972248055096d63b782060e473311b Mon Sep 17 00:00:00 2001 From: Maíra Canal Date: Wed, 3 Apr 2024 17:24:50 -0300 Subject: drm/v3d: Don't increment `enabled_ns` twice MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 509433d8146c ("drm/v3d: Expose the total GPU usage stats on sysfs") introduced the calculation of global GPU stats. For the regards, it used the already existing infrastructure provided by commit 09a93cc4f7d1 ("drm/v3d: Implement show_fdinfo() callback for GPU usage stats"). While adding global GPU stats calculation ability, the author forgot to delete the existing one. Currently, the value of `enabled_ns` is incremented twice by the end of the job, when it should be added just once. Therefore, delete the leftovers from commit 509433d8146c ("drm/v3d: Expose the total GPU usage stats on sysfs"). Fixes: 509433d8146c ("drm/v3d: Expose the total GPU usage stats on sysfs") Reported-by: Tvrtko Ursulin Signed-off-by: Maíra Canal Reviewed-by: Tvrtko Ursulin Reviewed-by: Jose Maria Casanova Crespo Link: https://patchwork.freedesktop.org/patch/msgid/20240403203517.731876-2-mcanal@igalia.com --- drivers/gpu/drm/v3d/v3d_irq.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/v3d/v3d_irq.c b/drivers/gpu/drm/v3d/v3d_irq.c index 2e04f6cb661e..ce6b2fb341d1 100644 --- a/drivers/gpu/drm/v3d/v3d_irq.c +++ b/drivers/gpu/drm/v3d/v3d_irq.c @@ -105,7 +105,6 @@ v3d_irq(int irq, void *arg) struct v3d_file_priv *file = v3d->bin_job->base.file->driver_priv; u64 runtime = local_clock() - file->start_ns[V3D_BIN]; - file->enabled_ns[V3D_BIN] += local_clock() - file->start_ns[V3D_BIN]; file->jobs_sent[V3D_BIN]++; v3d->queue[V3D_BIN].jobs_sent++; @@ -126,7 +125,6 @@ v3d_irq(int irq, void *arg) struct v3d_file_priv *file = v3d->render_job->base.file->driver_priv; u64 runtime = local_clock() - file->start_ns[V3D_RENDER]; - file->enabled_ns[V3D_RENDER] += local_clock() - file->start_ns[V3D_RENDER]; file->jobs_sent[V3D_RENDER]++; v3d->queue[V3D_RENDER].jobs_sent++; @@ -147,7 +145,6 @@ v3d_irq(int irq, void *arg) struct v3d_file_priv *file = v3d->csd_job->base.file->driver_priv; u64 runtime = local_clock() - file->start_ns[V3D_CSD]; - file->enabled_ns[V3D_CSD] += local_clock() - file->start_ns[V3D_CSD]; file->jobs_sent[V3D_CSD]++; v3d->queue[V3D_CSD].jobs_sent++; @@ -195,7 +192,6 @@ v3d_hub_irq(int irq, void *arg) struct v3d_file_priv *file = v3d->tfu_job->base.file->driver_priv; u64 runtime = local_clock() - file->start_ns[V3D_TFU]; - file->enabled_ns[V3D_TFU] += local_clock() - file->start_ns[V3D_TFU]; file->jobs_sent[V3D_TFU]++; v3d->queue[V3D_TFU].jobs_sent++; -- cgit v1.3.1 From ee7e980dc7c9f22c142807c5f582a6524138f57a Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 4 Apr 2024 19:35:53 -0400 Subject: drm/nouveau/kms/nv50-: Disable AUX bus for disconnected DP ports GSP has its own state for keeping track of whether or not a given display connector is plugged in or not, and enforces this state on the driver. In particular, AUX transactions on a DisplayPort connector which GSP says is disconnected can never succeed - and can in some cases even cause unexpected timeouts, which can trickle up to cause other problems. A good example of this is runtime power management: where we can actually get stuck trying to resume the GPU if a userspace application like fwupd tries accessing a drm_aux_dev for a disconnected port. This was an issue I hit a few times with my Slimbook Executive 16 - where trying to offload something to the discrete GPU would wake it up, and then potentially cause it to timeout as fwupd tried to immediately access the dp_aux_dev nodes for nouveau. Likewise: we don't really have any cases I know of where we'd want to ignore this state and try an aux transaction anyway - and failing pointless aux transactions immediately can even speed things up. So - let's start enabling/disabling the aux bus in nouveau_dp_detect() to fix this. We enable the aux bus during connector probing, and leave it enabled if we discover something is actually on the connector. Otherwise, we just shut it off. This should fix some people's runtime PM issues (like myself), and also get rid of quite of a lot of GSP error spam in dmesg. Signed-off-by: Lyude Paul Reviewed-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-2-lyude@redhat.com (cherry picked from commit 9c8a10bf1f3467b2c16f6848249bdc7692ace825) --- drivers/gpu/drm/nouveau/nouveau_dp.c | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index 7de7707ec6a8..3f6ccce20ea0 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -232,6 +232,9 @@ nouveau_dp_detect(struct nouveau_connector *nv_connector, dpcd[DP_DPCD_REV] != 0) return NOUVEAU_DP_SST; + // Ensure that the aux bus is enabled for probing + drm_dp_dpcd_set_powered(&nv_connector->aux, true); + mutex_lock(&nv_encoder->dp.hpd_irq_lock); if (mstm) { /* If we're not ready to handle MST state changes yet, just @@ -293,6 +296,13 @@ out: if (mstm && !mstm->suspended && ret != NOUVEAU_DP_MST) nv50_mstm_remove(mstm); + /* GSP doesn't like when we try to do aux transactions on a port it considers disconnected, + * and since we don't really have a usecase for that anyway - just disable the aux bus here + * if we've decided the connector is disconnected + */ + if (ret == NOUVEAU_DP_NONE) + drm_dp_dpcd_set_powered(&nv_connector->aux, false); + mutex_unlock(&nv_encoder->dp.hpd_irq_lock); return ret; } -- cgit v1.3.1 From bf52d7f9b2067f02efe7e32697479097aba4a055 Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Thu, 4 Apr 2024 19:35:54 -0400 Subject: drm/nouveau/dp: Don't probe eDP ports twice harder I didn't pay close enough attention the last time I tried to fix this problem - while we currently do correctly take care to make sure we don't probe a connected eDP port more then once, we don't do the same thing for eDP ports we found to be disconnected. So, fix this and make sure we only ever probe eDP ports once and then leave them at that connector state forever (since without HPD, it's not going to change on its own anyway). This should get rid of the last few GSP errors getting spit out during runtime suspend and resume on some machines, as we tried to reprobe eDP ports in response to ACPI hotplug probe events. Signed-off-by: Lyude Paul Reviewed-by: Dave Airlie Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com (cherry picked from commit fe6660b661c3397af0867d5d098f5b26581f1290) --- drivers/gpu/drm/nouveau/nouveau_dp.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/nouveau/nouveau_dp.c b/drivers/gpu/drm/nouveau/nouveau_dp.c index 3f6ccce20ea0..a72c45809484 100644 --- a/drivers/gpu/drm/nouveau/nouveau_dp.c +++ b/drivers/gpu/drm/nouveau/nouveau_dp.c @@ -225,12 +225,15 @@ nouveau_dp_detect(struct nouveau_connector *nv_connector, u8 *dpcd = nv_encoder->dp.dpcd; int ret = NOUVEAU_DP_NONE, hpd; - /* If we've already read the DPCD on an eDP device, we don't need to - * reread it as it won't change + /* eDP ports don't support hotplugging - so there's no point in probing eDP ports unless we + * haven't probed them once before. */ - if (connector->connector_type == DRM_MODE_CONNECTOR_eDP && - dpcd[DP_DPCD_REV] != 0) - return NOUVEAU_DP_SST; + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) { + if (connector->status == connector_status_connected) + return NOUVEAU_DP_SST; + else if (connector->status == connector_status_disconnected) + return NOUVEAU_DP_NONE; + } // Ensure that the aux bus is enabled for probing drm_dp_dpcd_set_powered(&nv_connector->aux, true); -- cgit v1.3.1 From 03cea821b82cbf0ee4a285f9dca6cc1d660dbef3 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 10 Apr 2024 09:09:54 -0500 Subject: platform/x86/amd: pmf: Decrease error message to debug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ASUS ROG Zephyrus G14 doesn't have _CRS in AMDI0102 device and so there are no resources to walk. This is expected behavior because it doesn't support Smart PC. Decrease error message to debug. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218685 Signed-off-by: Mario Limonciello Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240410140956.385-1-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmf/acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/platform/x86/amd/pmf/acpi.c b/drivers/platform/x86/amd/pmf/acpi.c index d0cf46e2fc8e..60fc71c9fb0f 100644 --- a/drivers/platform/x86/amd/pmf/acpi.c +++ b/drivers/platform/x86/amd/pmf/acpi.c @@ -437,7 +437,7 @@ int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev) status = acpi_walk_resources(ahandle, METHOD_NAME__CRS, apmf_walk_resources, pmf_dev); if (ACPI_FAILURE(status)) { - dev_err(pmf_dev->dev, "acpi_walk_resources failed :%d\n", status); + dev_dbg(pmf_dev->dev, "acpi_walk_resources failed :%d\n", status); return -EINVAL; } -- cgit v1.3.1 From ed13f622bcd594d6cefd6239b1722ed8b84ba98f Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 10 Apr 2024 09:09:55 -0500 Subject: platform/x86/amd: pmf: Add infrastructure for quirking supported funcs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the event of a BIOS bug add infrastructure that will be utilized to override the return value for supported_funcs to avoid enabling features. Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20240410140956.385-2-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmf/Makefile | 2 +- drivers/platform/x86/amd/pmf/acpi.c | 5 +++- drivers/platform/x86/amd/pmf/core.c | 1 + drivers/platform/x86/amd/pmf/pmf-quirks.c | 43 +++++++++++++++++++++++++++++++ drivers/platform/x86/amd/pmf/pmf.h | 3 +++ 5 files changed, 52 insertions(+), 2 deletions(-) create mode 100644 drivers/platform/x86/amd/pmf/pmf-quirks.c (limited to 'drivers') diff --git a/drivers/platform/x86/amd/pmf/Makefile b/drivers/platform/x86/amd/pmf/Makefile index 6b26e48ce8ad..7d6079b02589 100644 --- a/drivers/platform/x86/amd/pmf/Makefile +++ b/drivers/platform/x86/amd/pmf/Makefile @@ -7,4 +7,4 @@ obj-$(CONFIG_AMD_PMF) += amd-pmf.o amd-pmf-objs := core.o acpi.o sps.o \ auto-mode.o cnqf.o \ - tee-if.o spc.o + tee-if.o spc.o pmf-quirks.o diff --git a/drivers/platform/x86/amd/pmf/acpi.c b/drivers/platform/x86/amd/pmf/acpi.c index 60fc71c9fb0f..1157ec148880 100644 --- a/drivers/platform/x86/amd/pmf/acpi.c +++ b/drivers/platform/x86/amd/pmf/acpi.c @@ -343,7 +343,10 @@ static int apmf_if_verify_interface(struct amd_pmf_dev *pdev) if (err) return err; - pdev->supported_func = output.supported_functions; + /* only set if not already set by a quirk */ + if (!pdev->supported_func) + pdev->supported_func = output.supported_functions; + dev_dbg(pdev->dev, "supported functions:0x%x notifications:0x%x version:%u\n", output.supported_functions, output.notification_mask, output.version); diff --git a/drivers/platform/x86/amd/pmf/core.c b/drivers/platform/x86/amd/pmf/core.c index 5d4f80698a8b..64e6e34a2a9a 100644 --- a/drivers/platform/x86/amd/pmf/core.c +++ b/drivers/platform/x86/amd/pmf/core.c @@ -445,6 +445,7 @@ static int amd_pmf_probe(struct platform_device *pdev) mutex_init(&dev->lock); mutex_init(&dev->update_mutex); + amd_pmf_quirks_init(dev); apmf_acpi_init(dev); platform_set_drvdata(pdev, dev); amd_pmf_dbgfs_register(dev); diff --git a/drivers/platform/x86/amd/pmf/pmf-quirks.c b/drivers/platform/x86/amd/pmf/pmf-quirks.c new file mode 100644 index 000000000000..9f3790eaaa30 --- /dev/null +++ b/drivers/platform/x86/amd/pmf/pmf-quirks.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * AMD Platform Management Framework Driver Quirks + * + * Copyright (c) 2024, Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Author: Mario Limonciello + */ + +#include + +#include "pmf.h" + +struct quirk_entry { + u32 supported_func; +}; + +static struct quirk_entry quirk_no_sps_bug = { + .supported_func = 0x4003, +}; + +static const struct dmi_system_id fwbug_list[] = { + {} +}; + +void amd_pmf_quirks_init(struct amd_pmf_dev *dev) +{ + const struct dmi_system_id *dmi_id; + struct quirk_entry *quirks; + + dmi_id = dmi_first_match(fwbug_list); + if (!dmi_id) + return; + + quirks = dmi_id->driver_data; + if (quirks->supported_func) { + dev->supported_func = quirks->supported_func; + pr_info("Using supported funcs quirk to avoid %s platform firmware bug\n", + dmi_id->ident); + } +} + diff --git a/drivers/platform/x86/amd/pmf/pmf.h b/drivers/platform/x86/amd/pmf/pmf.h index 8c4df5753f40..eeedd0c0395a 100644 --- a/drivers/platform/x86/amd/pmf/pmf.h +++ b/drivers/platform/x86/amd/pmf/pmf.h @@ -720,4 +720,7 @@ int apmf_check_smart_pc(struct amd_pmf_dev *pmf_dev); void amd_pmf_populate_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in); void amd_pmf_dump_ta_inputs(struct amd_pmf_dev *dev, struct ta_pmf_enact_table *in); +/* Quirk infrastructure */ +void amd_pmf_quirks_init(struct amd_pmf_dev *dev); + #endif /* PMF_H */ -- cgit v1.3.1 From 9d893061ed68820de24b572d1e193b5e4737f2e0 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 10 Apr 2024 09:09:56 -0500 Subject: platform/x86/amd: pmf: Add quirk for ROG Zephyrus G14 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit ROG Zephyrus G14 advertises support for SPS notifications to the BIOS but doesn't actually use them. Instead the asus-nb-wmi driver utilizes such events. Add a quirk to prevent the system from registering for ACPI platform profile when this system is found to avoid conflicts. Reported-by: al0uette@outlook.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218685 Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20240410140956.385-3-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmf/pmf-quirks.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/amd/pmf/pmf-quirks.c b/drivers/platform/x86/amd/pmf/pmf-quirks.c index 9f3790eaaa30..0b2eb0ae85fe 100644 --- a/drivers/platform/x86/amd/pmf/pmf-quirks.c +++ b/drivers/platform/x86/amd/pmf/pmf-quirks.c @@ -21,6 +21,14 @@ static struct quirk_entry quirk_no_sps_bug = { }; static const struct dmi_system_id fwbug_list[] = { + { + .ident = "ROG Zephyrus G14", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "GA403UV"), + }, + .driver_data = &quirk_no_sps_bug, + }, {} }; -- cgit v1.3.1 From d8c2d38c4d1dee8fe8e015b9ebf65bdd8e4da99b Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Mon, 15 Apr 2024 14:28:53 -0700 Subject: platform/x86: ISST: Add Granite Rapids-D to HPM CPU list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add Granite Rapids-D to hpm_cpu_ids, so that MSR 0x54 can be used. Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240415212853.2820470-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/speed_select_if/isst_if_common.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c index 08df9494603c..30951f7131cd 100644 --- a/drivers/platform/x86/intel/speed_select_if/isst_if_common.c +++ b/drivers/platform/x86/intel/speed_select_if/isst_if_common.c @@ -719,6 +719,7 @@ static struct miscdevice isst_if_char_driver = { }; static const struct x86_cpu_id hpm_cpu_ids[] = { + X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_D, NULL), X86_MATCH_INTEL_FAM6_MODEL(GRANITERAPIDS_X, NULL), X86_MATCH_INTEL_FAM6_MODEL(ATOM_CRESTMONT_X, NULL), {} -- cgit v1.3.1 From bc774d46b41482534c7ba92f6342ca0a355c13af Mon Sep 17 00:00:00 2001 From: Srinivas Pandruvada Date: Mon, 15 Apr 2024 15:06:25 -0700 Subject: platform/x86/intel-uncore-freq: Increase minor number support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit No new changes will be added for minor version 2. Change the minor version number to 2 and stop displaying log message for unsupported minor version 2. Signed-off-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20240415220625.2828339-1-srinivas.pandruvada@linux.intel.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c index bd75d61ff8a6..ef730200a04b 100644 --- a/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c +++ b/drivers/platform/x86/intel/uncore-frequency/uncore-frequency-tpmi.c @@ -29,7 +29,7 @@ #include "uncore-frequency-common.h" #define UNCORE_MAJOR_VERSION 0 -#define UNCORE_MINOR_VERSION 1 +#define UNCORE_MINOR_VERSION 2 #define UNCORE_HEADER_INDEX 0 #define UNCORE_FABRIC_CLUSTER_OFFSET 8 @@ -329,7 +329,7 @@ static int uncore_probe(struct auxiliary_device *auxdev, const struct auxiliary_ goto remove_clusters; } - if (TPMI_MINOR_VERSION(pd_info->ufs_header_ver) != UNCORE_MINOR_VERSION) + if (TPMI_MINOR_VERSION(pd_info->ufs_header_ver) > UNCORE_MINOR_VERSION) dev_info(&auxdev->dev, "Uncore: Ignore: Unsupported minor version:%lx\n", TPMI_MINOR_VERSION(pd_info->ufs_header_ver)); -- cgit v1.3.1 From 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:14 +0300 Subject: net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only There are three DW MAC IP-cores which can have the multiple Tx/Rx queues enabled: DW GMAC v3.7+ with AV feature, DW QoS Eth v4.x/v5.x, DW XGMAC/XLGMAC Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't support the half-duplex link mode in case if more than one queues enabled: "In multiple queue/channel configurations, for half-duplex operation, enable only the Q0/CH0 on Tx and Rx. For single queue/channel in full-duplex operation, any queue/channel can be enabled." The rest of the IP-cores don't have such constraint. Thus in order to have the constraint applied for the DW QoS Eth MACs only, let's move the it' implementation to the respective MAC-capabilities getter and make sure the getter is called in the queues re-init procedure. Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode") Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 7 +++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 +++---------------- 2 files changed, 10 insertions(+), 16 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index cef25efbdff9..ec6a13e644b3 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -71,6 +71,13 @@ static void dwmac4_core_init(struct mac_device_info *hw, static void dwmac4_phylink_get_caps(struct stmmac_priv *priv) { priv->phylink_config.mac_capabilities |= MAC_2500FD; + + if (priv->plat->tx_queues_to_use > 1) + priv->phylink_config.mac_capabilities &= + ~(MAC_10HD | MAC_100HD | MAC_1000HD); + else + priv->phylink_config.mac_capabilities |= + (MAC_10HD | MAC_100HD | MAC_1000HD); } static void dwmac4_rx_queue_enable(struct mac_device_info *hw, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 24cd80490d19..dd58c21b53ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev) return ret; } -static void stmmac_set_half_duplex(struct stmmac_priv *priv) -{ - /* Half-Duplex can only work with single tx queue */ - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); - else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); -} - static int stmmac_phy_setup(struct stmmac_priv *priv) { struct stmmac_mdio_bus_data *mdio_bus_data; @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) priv->phylink_config.supported_interfaces); priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10FD | MAC_100FD | - MAC_1000FD; - - stmmac_set_half_duplex(priv); + MAC_10 | MAC_100 | MAC_1000; /* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); @@ -7355,7 +7341,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt); - stmmac_set_half_duplex(priv); + stmmac_mac_phylink_get_caps(priv); + stmmac_napi_add(dev); if (netif_running(dev)) -- cgit v1.3.1 From 59c3d6ca6cbded6c6599e975b42a9d6a27fcbaf2 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:15 +0300 Subject: net: stmmac: Fix max-speed being ignored on queue re-init It's possible to have the maximum link speed being artificially limited on the platform-specific basis. It's done either by setting up the plat_stmmacenet_data::max_speed field or by specifying the "max-speed" DT-property. In such cases it's required that any specific MAC-capabilities re-initializations would take the limit into account. In particular the link speed capabilities may change during the number of active Tx/Rx queues re-initialization. But the currently implemented procedure doesn't take the speed limit into account. Fix that by calling phylink_limit_mac_speed() in the stmmac_reinit_queues() method if the speed limitation was required in the same way as it's done in the stmmac_phy_setup() function. Fixes: 95201f36f395 ("net: stmmac: update MAC capabilities when tx queues are updated") Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index dd58c21b53ee..b8a1f02398ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -7328,6 +7328,7 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) { struct stmmac_priv *priv = netdev_priv(dev); int ret = 0, i; + int max_speed; if (netif_running(dev)) stmmac_release(dev); @@ -7343,6 +7344,10 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) stmmac_mac_phylink_get_caps(priv); + max_speed = priv->plat->max_speed; + if (max_speed) + phylink_limit_mac_speed(&priv->phylink_config, max_speed); + stmmac_napi_add(dev); if (netif_running(dev)) -- cgit v1.3.1 From 9cb54af214a7cdc91577ec083e5569f2ce2c86d8 Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Fri, 12 Apr 2024 21:03:16 +0300 Subject: net: stmmac: Fix IP-cores specific MAC capabilities Here is the list of the MAC capabilities specific to the particular DW MAC IP-cores currently supported by the driver: DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 Allwinner sun8i MAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD if there is more than 1 active Tx/Rx queues: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD DW XLGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_1000FD | MAC_2500FD | MAC_5000FD | MAC_10000FD | MAC_25000FD | MAC_40000FD | MAC_50000FD | MAC_100000FD As you can see there are only two common capabilities: MAC_ASYM_PAUSE | MAC_SYM_PAUSE. Meanwhile what is currently implemented defines 10/100/1000 link speeds for all IP-cores, which is definitely incorrect for DW MAC100, DW XGMAC and DW XLGMAC devices. Seeing the flow-control is implemented as a callback for each MAC IP-core (see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(), etc) and since the MAC-specific setup() method is supposed to be called for each available DW MAC-based device, the capabilities initialization can be freely moved to these setup() functions, thus correctly setting up the MAC-capabilities for each IP-core (including the Allwinner Sun8i). A new stmmac_link::caps field was specifically introduced for that so to have all link-specific info preserved in a single structure. Note the suggested change fixes three earlier commits at a time. The commit 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") permitted the 10-100 link speeds and 1G half-duplex mode for DW XGMAC IP-core even though it doesn't support them. The commit df7699c70c1b ("net: stmmac: Do not cut down 1G modes") incorrectly added the MAC1000 capability to the DW MAC100 IP-core. Similarly to the DW XGMAC the commit 8a880936e902 ("net: stmmac: Add XLGMII support") incorrectly permitted the 10-100 link speeds and 1G half-duplex mode for DW XLGMAC IP-core. Fixes: 5b0d7d7da64b ("net: stmmac: Add the missing speeds that XGMAC supports") Fixes: df7699c70c1b ("net: stmmac: Do not cut down 1G modes") Fixes: 8a880936e902 ("net: stmmac: Add XLGMII support") Suggested-by: Russell King (Oracle) Signed-off-by: Serge Semin Reviewed-by: Romain Gantois Signed-off-by: Paolo Abeni --- drivers/net/ethernet/stmicro/stmmac/common.h | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 2 ++ drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 10 ++++------ drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c | 18 ++++++++---------- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 7 ++++--- 7 files changed, 23 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index a6fefe675ef1..3b7d4ac1e7be 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -553,6 +553,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp; extern const struct stmmac_mode_ops dwmac4_ring_mode_ops; struct mac_link { + u32 caps; u32 speed_mask; u32 speed10; u32 speed100; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index b21d99faa2d0..e1b761dcfa1d 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) priv->dev->priv_flags |= IFF_UNICAST_FLT; + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; /* The loopback bit seems to be re-set when link change * Simply mask it each time * Speed 10/100/1000 are set in BIT(2)/BIT(3) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index 3927609abc44..8555299443f4 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000; mac->link.duplex = GMAC_CONTROL_DM; mac->link.speed10 = GMAC_CONTROL_PS; mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index a6e8d7bd9588..7667d103cd0e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv) dev_info(priv->device, "\tDWMAC100\n"); mac->pcsr = priv->ioaddr; + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100; mac->link.duplex = MAC_CONTROL_F; mac->link.speed10 = 0; mac->link.speed100 = 0; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index ec6a13e644b3..a38226d7cc6a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -70,14 +70,10 @@ static void dwmac4_core_init(struct mac_device_info *hw, static void dwmac4_phylink_get_caps(struct stmmac_priv *priv) { - priv->phylink_config.mac_capabilities |= MAC_2500FD; - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); + priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD); else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); + priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD); } static void dwmac4_rx_queue_enable(struct mac_device_info *hw, @@ -1385,6 +1381,8 @@ int dwmac4_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; mac->link.duplex = GMAC_CONFIG_DM; mac->link.speed10 = GMAC_CONFIG_PS; mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c index e841e312077e..f8e7775bb633 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c @@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw, writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN); } -static void xgmac_phylink_get_caps(struct stmmac_priv *priv) -{ - priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD | - MAC_10000FD | MAC_25000FD | - MAC_40000FD | MAC_50000FD | - MAC_100000FD; -} - static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable) { u32 tx = readl(ioaddr + XGMAC_TX_CONFIG); @@ -1540,7 +1532,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg * const struct stmmac_ops dwxgmac210_ops = { .core_init = dwxgmac2_core_init, - .phylink_get_caps = xgmac_phylink_get_caps, .set_mac = dwxgmac2_set_mac, .rx_ipc = dwxgmac2_rx_ipc, .rx_queue_enable = dwxgmac2_rx_queue_enable, @@ -1601,7 +1592,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode, const struct stmmac_ops dwxlgmac2_ops = { .core_init = dwxgmac2_core_init, - .phylink_get_caps = xgmac_phylink_get_caps, .set_mac = dwxgmac2_set_mac, .rx_ipc = dwxgmac2_rx_ipc, .rx_queue_enable = dwxlgmac2_rx_queue_enable, @@ -1661,6 +1651,9 @@ int dwxgmac2_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_1000FD | MAC_2500FD | MAC_5000FD | + MAC_10000FD; mac->link.duplex = 0; mac->link.speed10 = XGMAC_CONFIG_SS_10_MII; mac->link.speed100 = XGMAC_CONFIG_SS_100_MII; @@ -1698,6 +1691,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv) if (mac->multicast_filter_bins) mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_1000FD | MAC_2500FD | MAC_5000FD | + MAC_10000FD | MAC_25000FD | + MAC_40000FD | MAC_50000FD | + MAC_100000FD; mac->link.duplex = 0; mac->link.speed1000 = XLGMAC_CONFIG_SS_1000; mac->link.speed2500 = XLGMAC_CONFIG_SS_2500; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b8a1f02398ee..7c6fb14b5555 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1225,12 +1225,11 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) xpcs_get_interfaces(priv->hw->xpcs, priv->phylink_config.supported_interfaces); - priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10 | MAC_100 | MAC_1000; - /* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); + priv->phylink_config.mac_capabilities = priv->hw->link.caps; + max_speed = priv->plat->max_speed; if (max_speed) phylink_limit_mac_speed(&priv->phylink_config, max_speed); @@ -7344,6 +7343,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) stmmac_mac_phylink_get_caps(priv); + priv->phylink_config.mac_capabilities = priv->hw->link.caps; + max_speed = priv->plat->max_speed; if (max_speed) phylink_limit_mac_speed(&priv->phylink_config, max_speed); -- cgit v1.3.1 From 428051600cb4e5a61d81aba3f8009b6c4f5e7582 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Fri, 15 Mar 2024 12:08:20 +0100 Subject: ice: tc: check src_vsi in case of traffic from VF In case of traffic going from the VF (so ingress for port representor) source VSI should be consider during packet classification. It is needed for hardware to not match packets from different ports with filters added on other port. It is only for "from VF" traffic, because other traffic direction doesn't have source VSI. Set correct ::src_vsi in rule_info to pass it to the hardware filter. For example this rule should drop only ipv4 packets from eth10, not from the others VF PRs. It is needed to check source VSI in this case. $tc filter add dev eth10 ingress protocol ip flower skip_sw action drop Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reviewed-by: Jedrzej Jagielski Reviewed-by: Sridhar Samudrala Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c index b890410a2bc0..49ed5fd7db10 100644 --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c @@ -28,6 +28,8 @@ ice_tc_count_lkups(u32 flags, struct ice_tc_flower_lyr_2_4_hdrs *headers, * - ICE_TC_FLWR_FIELD_VLAN_TPID (present if specified) * - Tunnel flag (present if tunnel) */ + if (fltr->direction == ICE_ESWITCH_FLTR_EGRESS) + lkups_cnt++; if (flags & ICE_TC_FLWR_FIELD_TENANT_ID) lkups_cnt++; @@ -363,6 +365,11 @@ ice_tc_fill_rules(struct ice_hw *hw, u32 flags, /* Always add direction metadata */ ice_rule_add_direction_metadata(&list[ICE_TC_METADATA_LKUP_IDX]); + if (tc_fltr->direction == ICE_ESWITCH_FLTR_EGRESS) { + ice_rule_add_src_vsi_metadata(&list[i]); + i++; + } + rule_info->tun_type = ice_sw_type_from_tunnel(tc_fltr->tunnel_type); if (tc_fltr->tunnel_type != TNL_LAST) { i = ice_tc_fill_tunnel_outer(flags, tc_fltr, list, i); @@ -820,6 +827,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr) /* specify the cookie as filter_rule_id */ rule_info.fltr_rule_id = fltr->cookie; + rule_info.src_vsi = vsi->idx; ret = ice_add_adv_rule(hw, list, lkups_cnt, &rule_info, &rule_added); if (ret == -EEXIST) { -- cgit v1.3.1 From 73278715725a8347032acf233082ca4eb31e6a56 Mon Sep 17 00:00:00 2001 From: Michal Swiatkowski Date: Fri, 15 Mar 2024 12:08:21 +0100 Subject: ice: tc: allow zero flags in parsing tc flower The check for flags is done to not pass empty lookups to adding switch rule functions. Since metadata is always added to lookups there is no need to check against the flag. It is also fixing the problem with such rule: $ tc filter add dev gtp_dev ingress protocol ip prio 0 flower \ enc_dst_port 2123 action drop Switch block in case of GTP can't parse the destination port, because it should always be set to GTP specific value. The same with ethertype. The result is that there is no other matching criteria than GTP tunnel. In this case flags is 0, rule can't be added only because of defensive check against flags. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Reviewed-by: Wojciech Drewek Signed-off-by: Michal Swiatkowski Reviewed-by: Simon Horman Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c index 49ed5fd7db10..bcbcfc67e560 100644 --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c @@ -779,7 +779,7 @@ ice_eswitch_add_tc_fltr(struct ice_vsi *vsi, struct ice_tc_flower_fltr *fltr) int ret; int i; - if (!flags || (flags & ICE_TC_FLWR_FIELD_ENC_SRC_L4_PORT)) { + if (flags & ICE_TC_FLWR_FIELD_ENC_SRC_L4_PORT) { NL_SET_ERR_MSG_MOD(fltr->extack, "Unsupported encap field(s)"); return -EOPNOTSUPP; } -- cgit v1.3.1 From 2cca35f5dd78b9f8297c879c5db5ab137c5d86c3 Mon Sep 17 00:00:00 2001 From: Marcin Szycik Date: Tue, 9 Apr 2024 17:45:44 +0200 Subject: ice: Fix checking for unsupported keys on non-tunnel device Add missing FLOW_DISSECTOR_KEY_ENC_* checks to TC flower filter parsing. Without these checks, it would be possible to add filters with tunnel options on non-tunnel devices. enc_* options are only valid for tunnel devices. Example: devlink dev eswitch set $PF1_PCI mode switchdev echo 1 > /sys/class/net/$PF1/device/sriov_numvfs tc qdisc add dev $VF1_PR ingress ethtool -K $PF1 hw-tc-offload on tc filter add dev $VF1_PR ingress flower enc_ttl 12 skip_sw action drop Fixes: 9e300987d4a8 ("ice: VXLAN and Geneve TC support") Reviewed-by: Michal Swiatkowski Signed-off-by: Marcin Szycik Reviewed-by: Jacob Keller Tested-by: Sujai Buvaneswaran Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/ice/ice_tc_lib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/intel/ice/ice_tc_lib.c b/drivers/net/ethernet/intel/ice/ice_tc_lib.c index bcbcfc67e560..688ccb0615ab 100644 --- a/drivers/net/ethernet/intel/ice/ice_tc_lib.c +++ b/drivers/net/ethernet/intel/ice/ice_tc_lib.c @@ -1489,7 +1489,10 @@ ice_parse_cls_flower(struct net_device *filter_dev, struct ice_vsi *vsi, (BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS) | BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS) | BIT_ULL(FLOW_DISSECTOR_KEY_ENC_KEYID) | - BIT_ULL(FLOW_DISSECTOR_KEY_ENC_PORTS))) { + BIT_ULL(FLOW_DISSECTOR_KEY_ENC_PORTS) | + BIT_ULL(FLOW_DISSECTOR_KEY_ENC_IP) | + BIT_ULL(FLOW_DISSECTOR_KEY_ENC_OPTS) | + BIT_ULL(FLOW_DISSECTOR_KEY_ENC_CONTROL))) { NL_SET_ERR_MSG_MOD(fltr->extack, "Tunnel key used, but device isn't a tunnel"); return -EOPNOTSUPP; } else { -- cgit v1.3.1 From 9e4d3f4f34455abbaa9930bf6b7575a5cd081496 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Apr 2024 13:07:59 +0300 Subject: drm/panel: visionox-rm69299: don't unregister DSI device The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister(). Fixes: c7f66d32dd43 ("drm/panel: add support for rm69299 visionox panel") Reviewed-by: Jessica Zhang Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-1-9f56953c5fb9@linaro.org --- drivers/gpu/drm/panel/panel-visionox-rm69299.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c index 775144695283..b15ca56a09a7 100644 --- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c +++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c @@ -253,8 +253,6 @@ static void visionox_rm69299_remove(struct mipi_dsi_device *dsi) struct visionox_rm69299 *ctx = mipi_dsi_get_drvdata(dsi); mipi_dsi_detach(ctx->dsi); - mipi_dsi_device_unregister(ctx->dsi); - drm_panel_remove(&ctx->panel); } -- cgit v1.3.1 From 941c0bdbc176df825adf77052263b2d63db6fef7 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 4 Apr 2024 13:08:00 +0300 Subject: drm/panel: novatek-nt36682e: don't unregister DSI device The DSI device for the panel was registered by the DSI host, so it is an error to unregister it from the panel driver. Drop the call to mipi_dsi_device_unregister(). Fixes: ea4f9975625a ("drm/panel: Add support for Novatek NT36672E panel driver") Reviewed-by: Jessica Zhang Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240404-drop-panel-unregister-v1-2-9f56953c5fb9@linaro.org --- drivers/gpu/drm/panel/panel-novatek-nt36672e.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672e.c b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c index cb7406d74466..c39fe0fc5d69 100644 --- a/drivers/gpu/drm/panel/panel-novatek-nt36672e.c +++ b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c @@ -614,8 +614,6 @@ static void nt36672e_panel_remove(struct mipi_dsi_device *dsi) struct nt36672e_panel *ctx = mipi_dsi_get_drvdata(dsi); mipi_dsi_detach(ctx->dsi); - mipi_dsi_device_unregister(ctx->dsi); - drm_panel_remove(&ctx->panel); } -- cgit v1.3.1 From f8bbc07ac535593139c875ffa19af924b1084540 Mon Sep 17 00:00:00 2001 From: Lei Chen Date: Sun, 14 Apr 2024 22:02:46 -0400 Subject: tun: limit printing rate when illegal packet received by tun dev vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a59542 ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen Reviewed-by: Willem de Bruijn Acked-by: Jason Wang Reviewed-by: Eric Dumazet Acked-by: Michael S. Tsirkin Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski --- drivers/net/tun.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 0b3f21cba552..92da8c03d960 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -2125,14 +2125,16 @@ static ssize_t tun_put_user(struct tun_struct *tun, tun_is_little_endian(tun), true, vlan_hlen)) { struct skb_shared_info *sinfo = skb_shinfo(skb); - pr_err("unexpected GSO type: " - "0x%x, gso_size %d, hdr_len %d\n", - sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size), - tun16_to_cpu(tun, gso.hdr_len)); - print_hex_dump(KERN_ERR, "tun: ", - DUMP_PREFIX_NONE, - 16, 1, skb->head, - min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true); + + if (net_ratelimit()) { + netdev_err(tun->dev, "unexpected GSO type: 0x%x, gso_size %d, hdr_len %d\n", + sinfo->gso_type, tun16_to_cpu(tun, gso.gso_size), + tun16_to_cpu(tun, gso.hdr_len)); + print_hex_dump(KERN_ERR, "tun: ", + DUMP_PREFIX_NONE, + 16, 1, skb->head, + min((int)tun16_to_cpu(tun, gso.hdr_len), 64), true); + } WARN_ON_ONCE(1); return -EINVAL; } -- cgit v1.3.1 From fb1f4584b1215e8c209f6b3a4028ed8351a0e961 Mon Sep 17 00:00:00 2001 From: Chuanhong Guo Date: Tue, 12 Mar 2024 14:29:12 +0800 Subject: USB: serial: option: add support for Fibocom FM650/FG650 Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes. This patch adds support to all 4 modes. In all 4 modes, the first serial port is the AT console while the other 3 appear to be diagnostic interfaces for dumping modem logs. usb-devices output for all modes: ECM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a04 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms NCM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a05 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms RNDIS: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a06 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms MBIM: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=2cb7 ProdID=0a07 Rev=04.04 S: Manufacturer=Fibocom Wireless Inc. S: Product=FG650 Module S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Chuanhong Guo Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 16cf0ddaae9b..ad0fff1e889d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2295,6 +2295,10 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a3, 0xff) }, /* Fibocom FM101-GL (laptop MBIM) */ { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x01a4, 0xff), /* Fibocom FM101-GL (laptop MBIM) */ .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a04, 0xff) }, /* Fibocom FM650-CN (ECM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a05, 0xff) }, /* Fibocom FM650-CN (NCM mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a06, 0xff) }, /* Fibocom FM650-CN (RNDIS mode) */ + { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0a07, 0xff) }, /* Fibocom FM650-CN (MBIM mode) */ { USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) }, /* LongSung M5710 */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ -- cgit v1.3.1 From d59cf049c8378677053703e724808836f180888e Mon Sep 17 00:00:00 2001 From: Arınç ÜNAL Date: Sat, 13 Apr 2024 16:01:39 +0300 Subject: net: dsa: mt7530: fix mirroring frames received on local port MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This switch intellectual property provides a bit on the ARL global control register which controls allowing mirroring frames which are received on the local port (monitor port). This bit is unset after reset. This ability must be enabled to fully support the port mirroring feature on this switch intellectual property. Therefore, this patch fixes the traffic not being reflected on a port, which would be configured like below: tc qdisc add dev swp0 clsact tc filter add dev swp0 ingress matchall skip_sw \ action mirred egress mirror dev swp0 As a side note, this configuration provides the hairpinning feature for a single port. Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring") Signed-off-by: Arınç ÜNAL Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 6 ++++++ drivers/net/dsa/mt7530.h | 4 ++++ 2 files changed, 10 insertions(+) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index c0d0bce0b594..b84e1845fa02 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2480,6 +2480,9 @@ mt7530_setup(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Setup VLAN ID 0 for VLAN-unaware bridges */ ret = mt7530_setup_vlan0(priv); if (ret) @@ -2591,6 +2594,9 @@ mt7531_setup_common(struct dsa_switch *ds) PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); } + /* Allow mirroring frames received on the local port (monitor port). */ + mt7530_set(priv, MT753X_AGC, LOCAL_EN); + /* Flush the FDB table */ ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); if (ret < 0) diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h index 585db03c0548..a08053390b28 100644 --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h @@ -32,6 +32,10 @@ enum mt753x_id { #define SYSC_REG_RSTCTRL 0x34 #define RESET_MCM BIT(2) +/* Register for ARL global control */ +#define MT753X_AGC 0xc +#define LOCAL_EN BIT(7) + /* Registers to mac forward control for unknown frames */ #define MT7530_MFC 0x10 #define BC_FFP(x) (((x) & 0xff) << 24) -- cgit v1.3.1 From 2c606d138518cc69f09c35929abc414a99e3a28f Mon Sep 17 00:00:00 2001 From: Arınç ÜNAL Date: Sat, 13 Apr 2024 16:01:40 +0300 Subject: net: dsa: mt7530: fix port mirroring for MT7988 SoC switch MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version) v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU forward control register. Currently, the MT7530 DSA subdriver configures bits 0 to 2 of the CPU forward control register which breaks the port mirroring feature for the MT7988 SoC switch. Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET() macros which utilise the correct bits. Fixes: 110c18bfed41 ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by: Arınç ÜNAL Acked-by: Daniel Golle Signed-off-by: David S. Miller --- drivers/net/dsa/mt7530.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index b84e1845fa02..8090390edaf9 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -1883,14 +1883,16 @@ mt7530_port_vlan_del(struct dsa_switch *ds, int port, static int mt753x_mirror_port_get(unsigned int id, u32 val) { - return (id == ID_MT7531) ? MT7531_MIRROR_PORT_GET(val) : - MIRROR_PORT(val); + return (id == ID_MT7531 || id == ID_MT7988) ? + MT7531_MIRROR_PORT_GET(val) : + MIRROR_PORT(val); } static int mt753x_mirror_port_set(unsigned int id, u32 val) { - return (id == ID_MT7531) ? MT7531_MIRROR_PORT_SET(val) : - MIRROR_PORT(val); + return (id == ID_MT7531 || id == ID_MT7988) ? + MT7531_MIRROR_PORT_SET(val) : + MIRROR_PORT(val); } static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, -- cgit v1.3.1 From 13c785323b36b845300b256d0e5963c3727667d7 Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 17 Apr 2024 11:03:27 +0200 Subject: serial: stm32: Return IRQ_NONE in the ISR if no handling happend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If there is a stuck irq that the handler doesn't address, returning IRQ_HANDLED unconditionally makes it impossible for the irq core to detect the problem and disable the irq. So only return IRQ_HANDLED if an event was handled. A stuck irq is still problematic, but with this change at least it only makes the UART nonfunctional instead of occupying the (usually only) CPU by 100% and so stall the whole machine. Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/stm32-usart.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index 58d169e5c1db..d60cbac69194 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -861,6 +861,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) const struct stm32_usart_offsets *ofs = &stm32_port->info->ofs; u32 sr; unsigned int size; + irqreturn_t ret = IRQ_NONE; sr = readl_relaxed(port->membase + ofs->isr); @@ -869,11 +870,14 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) (sr & USART_SR_TC)) { stm32_usart_tc_interrupt_disable(port); stm32_usart_rs485_rts_disable(port); + ret = IRQ_HANDLED; } - if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) + if ((sr & USART_SR_RTOF) && ofs->icr != UNDEF_REG) { writel_relaxed(USART_ICR_RTOCF, port->membase + ofs->icr); + ret = IRQ_HANDLED; + } if ((sr & USART_SR_WUF) && ofs->icr != UNDEF_REG) { /* Clear wake up flag and disable wake up interrupt */ @@ -882,6 +886,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) stm32_usart_clr_bits(port, ofs->cr3, USART_CR3_WUFIE); if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) pm_wakeup_event(tport->tty->dev, 0); + ret = IRQ_HANDLED; } /* @@ -896,6 +901,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } } @@ -903,6 +909,7 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_port_lock(port); stm32_usart_transmit_chars(port); uart_port_unlock(port); + ret = IRQ_HANDLED; } /* Receiver timeout irq for DMA RX */ @@ -912,9 +919,10 @@ static irqreturn_t stm32_usart_interrupt(int irq, void *ptr) uart_unlock_and_check_sysrq(port); if (size) tty_flip_buffer_push(tport); + ret = IRQ_HANDLED; } - return IRQ_HANDLED; + return ret; } static void stm32_usart_set_mctrl(struct uart_port *port, unsigned int mctrl) -- cgit v1.3.1 From ea2624b5b829b8f93c0dce25721d835969b34faf Mon Sep 17 00:00:00 2001 From: Uwe Kleine-König Date: Wed, 17 Apr 2024 11:03:28 +0200 Subject: serial: stm32: Reset .throttled state in .startup() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When an UART is opened that still has .throttled set from a previous open, the RX interrupt is enabled but the irq handler doesn't consider it. This easily results in a stuck irq with the effect to occupy the CPU in a tight loop. So reset the throttle state in .startup() to ensure that RX irqs are handled. Fixes: d1ec8a2eabe9 ("serial: stm32: update throttle and unthrottle ops for dma mode") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/stm32-usart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c index d60cbac69194..4fa5a03ebac0 100644 --- a/drivers/tty/serial/stm32-usart.c +++ b/drivers/tty/serial/stm32-usart.c @@ -1092,6 +1092,7 @@ static int stm32_usart_startup(struct uart_port *port) val |= USART_CR2_SWAP; writel_relaxed(val, port->membase + ofs->cr2); } + stm32_port->throttled = false; /* RX FIFO Flush */ if (ofs->rqr != UNDEF_REG) -- cgit v1.3.1 From e871abcda3b67d0820b4182ebe93435624e9c6a4 Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Wed, 17 Apr 2024 13:38:29 +0200 Subject: random: handle creditable entropy from atomic process context The entropy accounting changes a static key when the RNG has initialized, since it only ever initializes once. Static key changes, however, cannot be made from atomic context, so depending on where the last creditable entropy comes from, the static key change might need to be deferred to a worker. Previously the code used the execute_in_process_context() helper function, which accounts for whether or not the caller is in_interrupt(). However, that doesn't account for the case where the caller is actually in process context but is holding a spinlock. This turned out to be the case with input_handle_event() in drivers/input/input.c contributing entropy: [] die+0xa8/0x2fc [] bug_handler+0x44/0xec [] brk_handler+0x90/0x144 [] do_debug_exception+0xa0/0x148 [] el1_dbg+0x60/0x7c [] el1h_64_sync_handler+0x38/0x90 [] el1h_64_sync+0x64/0x6c [] __might_resched+0x1fc/0x2e8 [] __might_sleep+0x44/0x7c [] cpus_read_lock+0x1c/0xec [] static_key_enable+0x14/0x38 [] crng_set_ready+0x14/0x28 [] execute_in_process_context+0xb8/0xf8 [] _credit_init_bits+0x118/0x1dc [] add_timer_randomness+0x264/0x270 [] add_input_randomness+0x38/0x48 [] input_handle_event+0x2b8/0x490 [] input_event+0x6c/0x98 According to Guoyong, it's not really possible to refactor the various drivers to never hold a spinlock there. And in_atomic() isn't reliable. So, rather than trying to be too fancy, just punt the change in the static key to a workqueue always. There's basically no drawback of doing this, as the code already needed to account for the static key not changing immediately, and given that it's just an optimization, there's not exactly a hurry to change the static key right away, so deferal is fine. Reported-by: Guoyong Wang Cc: stable@vger.kernel.org Fixes: f5bda35fba61 ("random: use static branch for crng_ready()") Signed-off-by: Jason A. Donenfeld --- drivers/char/random.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/char/random.c b/drivers/char/random.c index 456be28ba67c..2597cb43f438 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -702,7 +702,7 @@ static void extract_entropy(void *buf, size_t len) static void __cold _credit_init_bits(size_t bits) { - static struct execute_work set_ready; + static DECLARE_WORK(set_ready, crng_set_ready); unsigned int new, orig, add; unsigned long flags; @@ -718,8 +718,8 @@ static void __cold _credit_init_bits(size_t bits) if (orig < POOL_READY_BITS && new >= POOL_READY_BITS) { crng_reseed(NULL); /* Sets crng_init to CRNG_READY under base_crng.lock. */ - if (static_key_initialized) - execute_in_process_context(crng_set_ready, &set_ready); + if (static_key_initialized && system_unbound_wq) + queue_work(system_unbound_wq, &set_ready); atomic_notifier_call_chain(&random_ready_notifier, 0, NULL); wake_up_interruptible(&crng_init_wait); kill_fasync(&fasync, SIGIO, POLL_IN); @@ -890,8 +890,8 @@ void __init random_init(void) /* * If we were initialized by the cpu or bootloader before jump labels - * are initialized, then we should enable the static branch here, where - * it's guaranteed that jump labels have been initialized. + * or workqueues are initialized, then we should enable the static + * branch here, where it's guaranteed that these have been initialized. */ if (!static_branch_likely(&crng_is_ready) && crng_init >= CRNG_READY) crng_set_ready(NULL); -- cgit v1.3.1 From 83781384a96b95e2b6403d3c8a002b2c89031770 Mon Sep 17 00:00:00 2001 From: Gerd Bayer Date: Mon, 15 Apr 2024 15:15:07 +0200 Subject: s390/ism: Properly fix receive message buffer allocation Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP anymore, even on archs that may be able to fulfill this. Functionality that relied on the receive buffer being a compound page broke at that point: The SMC-D protocol, that utilizes the ism device driver, passes receive buffers to the splice processor in a struct splice_pipe_desc with a single entry list of struct pages. As the buffer is no longer a compound page, the splice processor now rejects requests to handle more than a page worth of data. Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and create a DMA map for it with dma_map_page(). Since only receive buffers on ISM devices use DMA, qualify the mapping as FROM_DEVICE. Since ISM devices are available on arch s390, only, and on that arch all DMA is coherent, there is no need to introduce and export some kind of dma_sync_to_cpu() method to be called by the SMC-D protocol layer. Analogously, replace dma_free_coherent by a two step dma_unmap_page, then folio_put to free the receive buffer. [1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/ Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent") Signed-off-by: Gerd Bayer Signed-off-by: David S. Miller --- drivers/s390/net/ism_drv.c | 37 ++++++++++++++++++++++++++++--------- 1 file changed, 28 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/ism_drv.c b/drivers/s390/net/ism_drv.c index 2c8e964425dc..43778b088ffa 100644 --- a/drivers/s390/net/ism_drv.c +++ b/drivers/s390/net/ism_drv.c @@ -292,13 +292,16 @@ out: static void ism_free_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { clear_bit(dmb->sba_idx, ism->sba_bitmap); - dma_free_coherent(&ism->pdev->dev, dmb->dmb_len, - dmb->cpu_addr, dmb->dma_addr); + dma_unmap_page(&ism->pdev->dev, dmb->dma_addr, dmb->dmb_len, + DMA_FROM_DEVICE); + folio_put(virt_to_folio(dmb->cpu_addr)); } static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) { + struct folio *folio; unsigned long bit; + int rc; if (PAGE_ALIGN(dmb->dmb_len) > dma_get_max_seg_size(&ism->pdev->dev)) return -EINVAL; @@ -315,14 +318,30 @@ static int ism_alloc_dmb(struct ism_dev *ism, struct ism_dmb *dmb) test_and_set_bit(dmb->sba_idx, ism->sba_bitmap)) return -EINVAL; - dmb->cpu_addr = dma_alloc_coherent(&ism->pdev->dev, dmb->dmb_len, - &dmb->dma_addr, - GFP_KERNEL | __GFP_NOWARN | - __GFP_NOMEMALLOC | __GFP_NORETRY); - if (!dmb->cpu_addr) - clear_bit(dmb->sba_idx, ism->sba_bitmap); + folio = folio_alloc(GFP_KERNEL | __GFP_NOWARN | __GFP_NOMEMALLOC | + __GFP_NORETRY, get_order(dmb->dmb_len)); - return dmb->cpu_addr ? 0 : -ENOMEM; + if (!folio) { + rc = -ENOMEM; + goto out_bit; + } + + dmb->cpu_addr = folio_address(folio); + dmb->dma_addr = dma_map_page(&ism->pdev->dev, + virt_to_page(dmb->cpu_addr), 0, + dmb->dmb_len, DMA_FROM_DEVICE); + if (dma_mapping_error(&ism->pdev->dev, dmb->dma_addr)) { + rc = -ENOMEM; + goto out_free; + } + + return 0; + +out_free: + kfree(dmb->cpu_addr); +out_bit: + clear_bit(dmb->sba_idx, ism->sba_bitmap); + return rc; } int ism_register_dmb(struct ism_dev *ism, struct ism_dmb *dmb, -- cgit v1.3.1 From 652ead9b746a63e4e79d7ad66d3edf0a8a5b0c2f Mon Sep 17 00:00:00 2001 From: Maarten Lankhorst Date: Thu, 4 Apr 2024 11:03:02 +0200 Subject: drm/xe: Fix bo leak in intel_fb_bo_framebuffer_init Add a unreference bo in the error path, to prevent leaking a bo ref. Return 0 on success to clarify the success path. Signed-off-by: Maarten Lankhorst Fixes: 44e694958b95 ("drm/xe/display: Implement display support") Cc: # v6.8+ Reviewed-by: Nirmoy Das Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com (cherry picked from commit a2f3d731be3893e730417ae3190760fcaffdf549) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/display/intel_fb_bo.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/display/intel_fb_bo.c b/drivers/gpu/drm/xe/display/intel_fb_bo.c index b21da7b745a5..a9c1f9885c6b 100644 --- a/drivers/gpu/drm/xe/display/intel_fb_bo.c +++ b/drivers/gpu/drm/xe/display/intel_fb_bo.c @@ -31,7 +31,7 @@ int intel_fb_bo_framebuffer_init(struct intel_framebuffer *intel_fb, ret = ttm_bo_reserve(&bo->ttm, true, false, NULL); if (ret) - return ret; + goto err; if (!(bo->flags & XE_BO_SCANOUT_BIT)) { /* @@ -42,12 +42,16 @@ int intel_fb_bo_framebuffer_init(struct intel_framebuffer *intel_fb, */ if (XE_IOCTL_DBG(i915, !list_empty(&bo->ttm.base.gpuva.list))) { ttm_bo_unreserve(&bo->ttm); - return -EINVAL; + ret = -EINVAL; + goto err; } bo->flags |= XE_BO_SCANOUT_BIT; } ttm_bo_unreserve(&bo->ttm); + return 0; +err: + xe_bo_put(bo); return ret; } -- cgit v1.3.1 From ca7c52ac7ad384bcf299d89482c45fec7cd00da9 Mon Sep 17 00:00:00 2001 From: Matthew Auld Date: Fri, 12 Apr 2024 12:31:45 +0100 Subject: drm/xe/vm: prevent UAF with asid based lookup The asid is only erased from the xarray when the vm refcount reaches zero, however this leads to potential UAF since the xe_vm_get() only works on a vm with refcount != 0. Since the asid is allocated in the vm create ioctl, rather erase it when closing the vm, prior to dropping the potential last ref. This should also work when user closes driver fd without explicit vm destroy. Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs") Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594 Signed-off-by: Matthew Auld Cc: Matthew Brost Cc: # v6.8+ Reviewed-by: Matthew Brost Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com (cherry picked from commit 83967c57320d0d01ae512f10e79213f81e4bf594) Signed-off-by: Lucas De Marchi --- drivers/gpu/drm/xe/xe_vm.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/xe/xe_vm.c b/drivers/gpu/drm/xe/xe_vm.c index 62d1ef8867a8..3d4c8f342e21 100644 --- a/drivers/gpu/drm/xe/xe_vm.c +++ b/drivers/gpu/drm/xe/xe_vm.c @@ -1577,6 +1577,16 @@ void xe_vm_close_and_put(struct xe_vm *vm) xe->usm.num_vm_in_fault_mode--; else if (!(vm->flags & XE_VM_FLAG_MIGRATION)) xe->usm.num_vm_in_non_fault_mode--; + + if (vm->usm.asid) { + void *lookup; + + xe_assert(xe, xe->info.has_asid); + xe_assert(xe, !(vm->flags & XE_VM_FLAG_MIGRATION)); + + lookup = xa_erase(&xe->usm.asid_to_vm, vm->usm.asid); + xe_assert(xe, lookup == vm); + } mutex_unlock(&xe->usm.lock); for_each_tile(tile, xe, id) @@ -1592,24 +1602,15 @@ static void vm_destroy_work_func(struct work_struct *w) struct xe_device *xe = vm->xe; struct xe_tile *tile; u8 id; - void *lookup; /* xe_vm_close_and_put was not called? */ xe_assert(xe, !vm->size); mutex_destroy(&vm->snap_mutex); - if (!(vm->flags & XE_VM_FLAG_MIGRATION)) { + if (!(vm->flags & XE_VM_FLAG_MIGRATION)) xe_device_mem_access_put(xe); - if (xe->info.has_asid && vm->usm.asid) { - mutex_lock(&xe->usm.lock); - lookup = xa_erase(&xe->usm.asid_to_vm, vm->usm.asid); - xe_assert(xe, lookup == vm); - mutex_unlock(&xe->usm.lock); - } - } - for_each_tile(tile, xe, id) XE_WARN_ON(vm->pt_root[id]); -- cgit v1.3.1 From f609e7b1b49e4d15cf107d2069673ee63860c398 Mon Sep 17 00:00:00 2001 From: Mario Limonciello Date: Wed, 10 Apr 2024 09:10:46 -0500 Subject: platform/x86/amd/pmc: Extend Framework 13 quirk to more BIOSes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still being worked on there is still a possibility that it won't need to apply to future BIOS releases. Add a quirk for BIOS 03.05 as well. Signed-off-by: Mario Limonciello Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com Reviewed-by: Ilpo Järvinen Signed-off-by: Ilpo Järvinen --- drivers/platform/x86/amd/pmc/pmc-quirks.c | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'drivers') diff --git a/drivers/platform/x86/amd/pmc/pmc-quirks.c b/drivers/platform/x86/amd/pmc/pmc-quirks.c index b456370166b6..b4f49720c87f 100644 --- a/drivers/platform/x86/amd/pmc/pmc-quirks.c +++ b/drivers/platform/x86/amd/pmc/pmc-quirks.c @@ -208,6 +208,15 @@ static const struct dmi_system_id fwbug_list[] = { DMI_MATCH(DMI_BIOS_VERSION, "03.03"), } }, + { + .ident = "Framework Laptop 13 (Phoenix)", + .driver_data = &quirk_spurious_8042, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Framework"), + DMI_MATCH(DMI_PRODUCT_NAME, "Laptop 13 (AMD Ryzen 7040Series)"), + DMI_MATCH(DMI_BIOS_VERSION, "03.05"), + } + }, {} }; -- cgit v1.3.1 From ca7c4507ba87e9fc22e0ecfa819c3664b3e8287b Mon Sep 17 00:00:00 2001 From: Christian König Date: Fri, 15 Mar 2024 13:07:53 +0100 Subject: drm/amdgpu: remove invalid resource->start check v2 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The majority of those where removed in the commit aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") But this one was missed because it's working on the resource and not the BO. Since we also no longer use a fake start address for visible BOs this will now trigger invalid mapping errors. v2: also remove the unused variable Signed-off-by: Christian König Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") CC: stable@vger.kernel.org Acked-by: Pierre-Eric Pelloux-Prayer Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 4 ---- 1 file changed, 4 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index fc418e670fda..6417cb76ccd4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -557,7 +557,6 @@ static int amdgpu_ttm_io_mem_reserve(struct ttm_device *bdev, struct ttm_resource *mem) { struct amdgpu_device *adev = amdgpu_ttm_adev(bdev); - size_t bus_size = (size_t)mem->size; switch (mem->mem_type) { case TTM_PL_SYSTEM: @@ -568,9 +567,6 @@ static int amdgpu_ttm_io_mem_reserve(struct ttm_device *bdev, break; case TTM_PL_VRAM: mem->bus.offset = mem->start << PAGE_SHIFT; - /* check if it's visible */ - if ((mem->bus.offset + bus_size) > adev->gmc.visible_vram_size) - return -EINVAL; if (adev->mman.aper_base_kaddr && mem->placement & TTM_PL_FLAG_CONTIGUOUS) -- cgit v1.3.1 From 18921b205012568b45760753ad3146ddb9e2d4e2 Mon Sep 17 00:00:00 2001 From: Felix Kuehling Date: Wed, 10 Apr 2024 15:52:10 -0400 Subject: drm/amdkfd: Fix memory leak in create_process failure Fix memory leak due to a leaked mmget reference on an error handling code path that is triggered when attempting to create KFD processes while a GPU reset is in progress. Fixes: 0ab2d7532b05 ("drm/amdkfd: prepare per-process debug enable and disable") CC: Xiaogang Chen Signed-off-by: Felix Kuehling Tested-by: Harish Kasiviswanthan Reviewed-by: Mukul Joshi Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdkfd/kfd_process.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index 717a60d7a4ea..b79986412cd8 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -819,9 +819,9 @@ struct kfd_process *kfd_create_process(struct task_struct *thread) mutex_lock(&kfd_processes_mutex); if (kfd_is_locked()) { - mutex_unlock(&kfd_processes_mutex); pr_debug("KFD is locked! Cannot create process"); - return ERR_PTR(-EINVAL); + process = ERR_PTR(-EINVAL); + goto out; } /* A prior open of /dev/kfd could have already created the process. */ -- cgit v1.3.1 From 91f10a3d21f2313485178d49efef8a3ba02bd8c7 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 29 Mar 2024 18:03:03 -0400 Subject: Revert "drm/amd/display: fix USB-C flag update after enc10 feature init" This reverts commit b5abd7f983e14054593dc91d6df2aa5f8cc67652. This change breaks DSC on 4k monitors at 144Hz over USB-C. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254 Reviewed-by: Harry Wentland Signed-off-by: Alex Deucher Cc: Muhammad Ahmed Cc: Tom Chung Cc: Charlene Liu Cc: Hamza Mahfooz Cc: Harry Wentland Cc: stable@vger.kernel.org --- drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 8 +++----- drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 ++-- 2 files changed, 5 insertions(+), 7 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c index e224a028d68a..8a0460e86309 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c @@ -248,14 +248,12 @@ void dcn32_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector; - enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; - - enc10->base.features = *enc_features; if (enc10->base.connector.id == CONNECTOR_ID_USBC) enc10->base.features.flags.bits.DP_IS_USB_C = 1; - if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1; + enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; + + enc10->base.features = *enc_features; enc10->base.transmitter = init_data->transmitter; diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c index 81e349d5835b..da94e5309fba 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c +++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c @@ -184,6 +184,8 @@ void dcn35_link_encoder_construct( enc10->base.hpd_source = init_data->hpd_source; enc10->base.connector = init_data->connector; + if (enc10->base.connector.id == CONNECTOR_ID_USBC) + enc10->base.features.flags.bits.DP_IS_USB_C = 1; enc10->base.preferred_engine = ENGINE_ID_UNKNOWN; @@ -238,8 +240,6 @@ void dcn35_link_encoder_construct( } enc10->base.features.flags.bits.HDMI_6GB_EN = 1; - if (enc10->base.connector.id == CONNECTOR_ID_USBC) - enc10->base.features.flags.bits.DP_IS_USB_C = 1; if (bp_funcs->get_connector_speed_cap_info) result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios, -- cgit v1.3.1 From 6fef2d4c00b5b8561ad68dd2b68173f5c6af1e75 Mon Sep 17 00:00:00 2001 From: xinhui pan Date: Thu, 11 Apr 2024 11:11:38 +0800 Subject: drm/amdgpu: validate the parameters of bo mapping operations more clearly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Verify the parameters of amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. Fixes: dc54d3d1744d ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2") Cc: stable@vger.kernel.org Reported-by: Vlad Stolyarov Suggested-by: Christian König Signed-off-by: xinhui pan Reviewed-by: Christian König Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 72 ++++++++++++++++++++++------------ 1 file changed, 46 insertions(+), 26 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c index 4299ce386322..94089069c9ad 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c @@ -1613,6 +1613,37 @@ static void amdgpu_vm_bo_insert_map(struct amdgpu_device *adev, trace_amdgpu_vm_bo_map(bo_va, mapping); } +/* Validate operation parameters to prevent potential abuse */ +static int amdgpu_vm_verify_parameters(struct amdgpu_device *adev, + struct amdgpu_bo *bo, + uint64_t saddr, + uint64_t offset, + uint64_t size) +{ + uint64_t tmp, lpfn; + + if (saddr & AMDGPU_GPU_PAGE_MASK + || offset & AMDGPU_GPU_PAGE_MASK + || size & AMDGPU_GPU_PAGE_MASK) + return -EINVAL; + + if (check_add_overflow(saddr, size, &tmp) + || check_add_overflow(offset, size, &tmp) + || size == 0 /* which also leads to end < begin */) + return -EINVAL; + + /* make sure object fit at this offset */ + if (bo && offset + size > amdgpu_bo_size(bo)) + return -EINVAL; + + /* Ensure last pfn not exceed max_pfn */ + lpfn = (saddr + size - 1) >> AMDGPU_GPU_PAGE_SHIFT; + if (lpfn >= adev->vm_manager.max_pfn) + return -EINVAL; + + return 0; +} + /** * amdgpu_vm_bo_map - map bo inside a vm * @@ -1639,21 +1670,14 @@ int amdgpu_vm_bo_map(struct amdgpu_device *adev, struct amdgpu_bo *bo = bo_va->base.bo; struct amdgpu_vm *vm = bo_va->base.vm; uint64_t eaddr; + int r; - /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) - return -EINVAL; - if (saddr + size <= saddr || offset + size <= offset) - return -EINVAL; - - /* make sure object fit at this offset */ - eaddr = saddr + size - 1; - if ((bo && offset + size > amdgpu_bo_size(bo)) || - (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) - return -EINVAL; + r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size); + if (r) + return r; saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; tmp = amdgpu_vm_it_iter_first(&vm->va, saddr, eaddr); if (tmp) { @@ -1706,17 +1730,9 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, uint64_t eaddr; int r; - /* validate the parameters */ - if (saddr & ~PAGE_MASK || offset & ~PAGE_MASK || size & ~PAGE_MASK) - return -EINVAL; - if (saddr + size <= saddr || offset + size <= offset) - return -EINVAL; - - /* make sure object fit at this offset */ - eaddr = saddr + size - 1; - if ((bo && offset + size > amdgpu_bo_size(bo)) || - (eaddr >= adev->vm_manager.max_pfn << AMDGPU_GPU_PAGE_SHIFT)) - return -EINVAL; + r = amdgpu_vm_verify_parameters(adev, bo, saddr, offset, size); + if (r) + return r; /* Allocate all the needed memory */ mapping = kmalloc(sizeof(*mapping), GFP_KERNEL); @@ -1730,7 +1746,7 @@ int amdgpu_vm_bo_replace_map(struct amdgpu_device *adev, } saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; mapping->start = saddr; mapping->last = eaddr; @@ -1817,10 +1833,14 @@ int amdgpu_vm_bo_clear_mappings(struct amdgpu_device *adev, struct amdgpu_bo_va_mapping *before, *after, *tmp, *next; LIST_HEAD(removed); uint64_t eaddr; + int r; + + r = amdgpu_vm_verify_parameters(adev, NULL, saddr, 0, size); + if (r) + return r; - eaddr = saddr + size - 1; saddr /= AMDGPU_GPU_PAGE_SIZE; - eaddr /= AMDGPU_GPU_PAGE_SIZE; + eaddr = saddr + (size - 1) / AMDGPU_GPU_PAGE_SIZE; /* Allocate all the needed memory */ before = kzalloc(sizeof(*before), GFP_KERNEL); -- cgit v1.3.1 From a6ff969fe9cbf369e3cd0ac54261fec1122682ec Mon Sep 17 00:00:00 2001 From: Christian König Date: Thu, 4 Apr 2024 16:25:40 +0200 Subject: drm/amdgpu: fix visible VRAM handling during faults MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When we removed the hacky start code check we actually didn't took into account that *all* VRAM pages needs to be CPU accessible. Clean up the code and unify the handling into a single helper which checks if the whole resource is CPU accessible. The only place where a partial check would make sense is during eviction, but that is neglitible. Signed-off-by: Christian König Fixes: aed01a68047b ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2") Reviewed-by: Alex Deucher Signed-off-by: Alex Deucher CC: stable@vger.kernel.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- drivers/gpu/drm/amd/amdgpu/amdgpu_object.c | 22 +++++------ drivers/gpu/drm/amd/amdgpu/amdgpu_object.h | 22 ----------- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c | 61 +++++++++++++++++++----------- drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h | 3 ++ 5 files changed, 53 insertions(+), 57 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index 0a4b09709cfb..ec888fc6ead8 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -819,7 +819,7 @@ retry: p->bytes_moved += ctx.bytes_moved; if (!amdgpu_gmc_vram_full_visible(&adev->gmc) && - amdgpu_bo_in_cpu_visible_vram(bo)) + amdgpu_res_cpu_visible(adev, bo->tbo.resource)) p->bytes_moved_vis += ctx.bytes_moved; if (unlikely(r == -ENOMEM) && domain != bo->allowed_domains) { diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c index 010b0cb7693c..2099159a693f 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.c @@ -617,8 +617,7 @@ int amdgpu_bo_create(struct amdgpu_device *adev, return r; if (!amdgpu_gmc_vram_full_visible(&adev->gmc) && - bo->tbo.resource->mem_type == TTM_PL_VRAM && - amdgpu_bo_in_cpu_visible_vram(bo)) + amdgpu_res_cpu_visible(adev, bo->tbo.resource)) amdgpu_cs_report_moved_bytes(adev, ctx.bytes_moved, ctx.bytes_moved); else @@ -1272,23 +1271,25 @@ void amdgpu_bo_move_notify(struct ttm_buffer_object *bo, bool evict) void amdgpu_bo_get_memory(struct amdgpu_bo *bo, struct amdgpu_mem_stats *stats) { + struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); + struct ttm_resource *res = bo->tbo.resource; uint64_t size = amdgpu_bo_size(bo); struct drm_gem_object *obj; unsigned int domain; bool shared; /* Abort if the BO doesn't currently have a backing store */ - if (!bo->tbo.resource) + if (!res) return; obj = &bo->tbo.base; shared = drm_gem_object_is_shared_for_memory_stats(obj); - domain = amdgpu_mem_type_to_domain(bo->tbo.resource->mem_type); + domain = amdgpu_mem_type_to_domain(res->mem_type); switch (domain) { case AMDGPU_GEM_DOMAIN_VRAM: stats->vram += size; - if (amdgpu_bo_in_cpu_visible_vram(bo)) + if (amdgpu_res_cpu_visible(adev, bo->tbo.resource)) stats->visible_vram += size; if (shared) stats->vram_shared += size; @@ -1389,10 +1390,7 @@ vm_fault_t amdgpu_bo_fault_reserve_notify(struct ttm_buffer_object *bo) /* Remember that this BO was accessed by the CPU */ abo->flags |= AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED; - if (bo->resource->mem_type != TTM_PL_VRAM) - return 0; - - if (amdgpu_bo_in_cpu_visible_vram(abo)) + if (amdgpu_res_cpu_visible(adev, bo->resource)) return 0; /* Can't move a pinned BO to visible VRAM */ @@ -1415,7 +1413,7 @@ vm_fault_t amdgpu_bo_fault_reserve_notify(struct ttm_buffer_object *bo) /* this should never happen */ if (bo->resource->mem_type == TTM_PL_VRAM && - !amdgpu_bo_in_cpu_visible_vram(abo)) + !amdgpu_res_cpu_visible(adev, bo->resource)) return VM_FAULT_SIGBUS; ttm_bo_move_to_lru_tail_unlocked(bo); @@ -1579,6 +1577,7 @@ uint32_t amdgpu_bo_get_preferred_domain(struct amdgpu_device *adev, */ u64 amdgpu_bo_print_info(int id, struct amdgpu_bo *bo, struct seq_file *m) { + struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); struct dma_buf_attachment *attachment; struct dma_buf *dma_buf; const char *placement; @@ -1587,10 +1586,11 @@ u64 amdgpu_bo_print_info(int id, struct amdgpu_bo *bo, struct seq_file *m) if (dma_resv_trylock(bo->tbo.base.resv)) { unsigned int domain; + domain = amdgpu_mem_type_to_domain(bo->tbo.resource->mem_type); switch (domain) { case AMDGPU_GEM_DOMAIN_VRAM: - if (amdgpu_bo_in_cpu_visible_vram(bo)) + if (amdgpu_res_cpu_visible(adev, bo->tbo.resource)) placement = "VRAM VISIBLE"; else placement = "VRAM"; diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h index be679c42b0b8..fa03d9e4874c 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_object.h @@ -250,28 +250,6 @@ static inline u64 amdgpu_bo_mmap_offset(struct amdgpu_bo *bo) return drm_vma_node_offset_addr(&bo->tbo.base.vma_node); } -/** - * amdgpu_bo_in_cpu_visible_vram - check if BO is (partly) in visible VRAM - */ -static inline bool amdgpu_bo_in_cpu_visible_vram(struct amdgpu_bo *bo) -{ - struct amdgpu_device *adev = amdgpu_ttm_adev(bo->tbo.bdev); - struct amdgpu_res_cursor cursor; - - if (!bo->tbo.resource || bo->tbo.resource->mem_type != TTM_PL_VRAM) - return false; - - amdgpu_res_first(bo->tbo.resource, 0, amdgpu_bo_size(bo), &cursor); - while (cursor.remaining) { - if (cursor.start < adev->gmc.visible_vram_size) - return true; - - amdgpu_res_next(&cursor, cursor.size); - } - - return false; -} - /** * amdgpu_bo_explicit_sync - return whether the bo is explicitly synced */ diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c index 6417cb76ccd4..1d71729e3f6b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.c @@ -133,7 +133,7 @@ static void amdgpu_evict_flags(struct ttm_buffer_object *bo, } else if (!amdgpu_gmc_vram_full_visible(&adev->gmc) && !(abo->flags & AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED) && - amdgpu_bo_in_cpu_visible_vram(abo)) { + amdgpu_res_cpu_visible(adev, bo->resource)) { /* Try evicting to the CPU inaccessible part of VRAM * first, but only set GTT as busy placement, so this @@ -403,40 +403,55 @@ error: return r; } -/* - * amdgpu_mem_visible - Check that memory can be accessed by ttm_bo_move_memcpy +/** + * amdgpu_res_cpu_visible - Check that resource can be accessed by CPU + * @adev: amdgpu device + * @res: the resource to check * - * Called by amdgpu_bo_move() + * Returns: true if the full resource is CPU visible, false otherwise. */ -static bool amdgpu_mem_visible(struct amdgpu_device *adev, - struct ttm_resource *mem) +bool amdgpu_res_cpu_visible(struct amdgpu_device *adev, + struct ttm_resource *res) { - u64 mem_size = (u64)mem->size; struct amdgpu_res_cursor cursor; - u64 end; - if (mem->mem_type == TTM_PL_SYSTEM || - mem->mem_type == TTM_PL_TT) + if (!res) + return false; + + if (res->mem_type == TTM_PL_SYSTEM || res->mem_type == TTM_PL_TT || + res->mem_type == AMDGPU_PL_PREEMPT) return true; - if (mem->mem_type != TTM_PL_VRAM) + + if (res->mem_type != TTM_PL_VRAM) return false; - amdgpu_res_first(mem, 0, mem_size, &cursor); - end = cursor.start + cursor.size; + amdgpu_res_first(res, 0, res->size, &cursor); while (cursor.remaining) { + if ((cursor.start + cursor.size) >= adev->gmc.visible_vram_size) + return false; amdgpu_res_next(&cursor, cursor.size); + } - if (!cursor.remaining) - break; + return true; +} - /* ttm_resource_ioremap only supports contiguous memory */ - if (end != cursor.start) - return false; +/* + * amdgpu_res_copyable - Check that memory can be accessed by ttm_bo_move_memcpy + * + * Called by amdgpu_bo_move() + */ +static bool amdgpu_res_copyable(struct amdgpu_device *adev, + struct ttm_resource *mem) +{ + if (!amdgpu_res_cpu_visible(adev, mem)) + return false; - end = cursor.start + cursor.size; - } + /* ttm_resource_ioremap only supports contiguous memory */ + if (mem->mem_type == TTM_PL_VRAM && + !(mem->placement & TTM_PL_FLAG_CONTIGUOUS)) + return false; - return end <= adev->gmc.visible_vram_size; + return true; } /* @@ -529,8 +544,8 @@ static int amdgpu_bo_move(struct ttm_buffer_object *bo, bool evict, if (r) { /* Check that all memory is CPU accessible */ - if (!amdgpu_mem_visible(adev, old_mem) || - !amdgpu_mem_visible(adev, new_mem)) { + if (!amdgpu_res_copyable(adev, old_mem) || + !amdgpu_res_copyable(adev, new_mem)) { pr_err("Move buffer fallback to memcpy unavailable\n"); return r; } diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h index 65ec82141a8e..32cf6b6f6efd 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h @@ -139,6 +139,9 @@ int amdgpu_vram_mgr_reserve_range(struct amdgpu_vram_mgr *mgr, int amdgpu_vram_mgr_query_page_status(struct amdgpu_vram_mgr *mgr, uint64_t start); +bool amdgpu_res_cpu_visible(struct amdgpu_device *adev, + struct ttm_resource *res); + int amdgpu_ttm_init(struct amdgpu_device *adev); void amdgpu_ttm_fini(struct amdgpu_device *adev); void amdgpu_ttm_set_buffer_funcs_status(struct amdgpu_device *adev, -- cgit v1.3.1 From 0ba753bc7e79e49556e81b0d09b2de1aa558553b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Sun, 14 Apr 2024 22:06:08 -0400 Subject: drm/radeon: make -fstrict-flex-arrays=3 happy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver parses a union where the layout up through the first array is the same, however, the array has different sizes depending on the elements in the union. Be explicit to fix the UBSAN checker. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323 Fixes: df8fc4e934c1 ("kbuild: Enable -fstrict-flex-arrays=3") Acked-by: Christian König Reviewed-by: Kees Cook Signed-off-by: Alex Deucher Cc: Kees Cook --- drivers/gpu/drm/radeon/radeon_atombios.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c index bb1f0a3371ab..10793a433bf5 100644 --- a/drivers/gpu/drm/radeon/radeon_atombios.c +++ b/drivers/gpu/drm/radeon/radeon_atombios.c @@ -923,8 +923,12 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct max_device = ATOM_MAX_SUPPORTED_DEVICE_INFO; for (i = 0; i < max_device; i++) { - ATOM_CONNECTOR_INFO_I2C ci = - supported_devices->info.asConnInfo[i]; + ATOM_CONNECTOR_INFO_I2C ci; + + if (frev > 1) + ci = supported_devices->info_2d1.asConnInfo[i]; + else + ci = supported_devices->info.asConnInfo[i]; bios_connectors[i].valid = false; -- cgit v1.3.1 From 781d41fed19caf900c8405064676813dc9921d32 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 8 Apr 2024 13:30:15 -0400 Subject: drm/radeon: silence UBSAN warning (v3) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Convert a variable sized array from [1] to []. v2: fix up a few more. v3: integrate comments from Kees. Reviewed-by: Kees Cook Tested-by: Jeff Johnson (v2) Acked-by: Christian König (v1) Signed-off-by: Alex Deucher Cc: keescook@chromium.org --- drivers/gpu/drm/radeon/pptable.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/radeon/pptable.h b/drivers/gpu/drm/radeon/pptable.h index 94947229888b..b7f22597ee95 100644 --- a/drivers/gpu/drm/radeon/pptable.h +++ b/drivers/gpu/drm/radeon/pptable.h @@ -424,7 +424,7 @@ typedef struct _ATOM_PPLIB_SUMO_CLOCK_INFO{ typedef struct _ATOM_PPLIB_STATE_V2 { //number of valid dpm levels in this state; Driver uses it to calculate the whole - //size of the state: sizeof(ATOM_PPLIB_STATE_V2) + (ucNumDPMLevels - 1) * sizeof(UCHAR) + //size of the state: struct_size(ATOM_PPLIB_STATE_V2, clockInfoIndex, ucNumDPMLevels) UCHAR ucNumDPMLevels; //a index to the array of nonClockInfos @@ -432,14 +432,14 @@ typedef struct _ATOM_PPLIB_STATE_V2 /** * Driver will read the first ucNumDPMLevels in this array */ - UCHAR clockInfoIndex[1]; + UCHAR clockInfoIndex[] __counted_by(ucNumDPMLevels); } ATOM_PPLIB_STATE_V2; typedef struct _StateArray{ //how many states we have UCHAR ucNumEntries; - ATOM_PPLIB_STATE_V2 states[1]; + ATOM_PPLIB_STATE_V2 states[] __counted_by(ucNumEntries); }StateArray; @@ -450,7 +450,7 @@ typedef struct _ClockInfoArray{ //sizeof(ATOM_PPLIB_CLOCK_INFO) UCHAR ucEntrySize; - UCHAR clockInfo[1]; + UCHAR clockInfo[] __counted_by(ucNumEntries); }ClockInfoArray; typedef struct _NonClockInfoArray{ @@ -460,7 +460,7 @@ typedef struct _NonClockInfoArray{ //sizeof(ATOM_PPLIB_NONCLOCK_INFO) UCHAR ucEntrySize; - ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[1]; + ATOM_PPLIB_NONCLOCK_INFO nonClockInfo[] __counted_by(ucNumEntries); }NonClockInfoArray; typedef struct _ATOM_PPLIB_Clock_Voltage_Dependency_Record -- cgit v1.3.1 From d362046021ea122309da8c8e0b6850c792ca97b5 Mon Sep 17 00:00:00 2001 From: Vanillan Wang Date: Tue, 16 Apr 2024 20:07:13 +0800 Subject: net:usb:qmi_wwan: support Rolling modules Update the qmi_wwan driver support for the Rolling LTE modules. - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe Here are the outputs of usb-devices: T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Vanillan Wang Link: https://lore.kernel.org/r/20240416120713.24777-1-vanillanwang@163.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index e2e181378f41..edc34402e787 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1431,6 +1431,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2692, 0x9025, 4)}, /* Cellient MPL200 (rebranded Qualcomm 05c6:9025) */ {QMI_QUIRK_SET_DTR(0x1546, 0x1312, 4)}, /* u-blox LARA-R6 01B */ {QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)}, /* u-blox LARA-L6 */ + {QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.3.1 From 94667949ec3bbb2218c46ad0a0e7274c8832e494 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 16 Apr 2024 10:23:29 +0200 Subject: net: ethernet: mtk_eth_soc: fix WED + wifi reset The WLAN + WED reset sequence relies on being able to receive interrupts from the card, in order to synchronize individual steps with the firmware. When WED is stopped, leave interrupts running and rely on the driver turning off unwanted ones. WED DMA also needs to be disabled before resetting. Fixes: f78cd9c783e0 ("net: ethernet: mtk_wed: update mtk_wed_stop") Signed-off-by: Felix Fietkau Link: https://lore.kernel.org/r/20240416082330.82564-1-nbd@nbd.name Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/mediatek/mtk_wed.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/mediatek/mtk_wed.c b/drivers/net/ethernet/mediatek/mtk_wed.c index c895e265ae0e..61334a71058c 100644 --- a/drivers/net/ethernet/mediatek/mtk_wed.c +++ b/drivers/net/ethernet/mediatek/mtk_wed.c @@ -1074,13 +1074,13 @@ mtk_wed_dma_disable(struct mtk_wed_device *dev) static void mtk_wed_stop(struct mtk_wed_device *dev) { + mtk_wed_dma_disable(dev); mtk_wed_set_ext_int(dev, false); wed_w32(dev, MTK_WED_WPDMA_INT_TRIGGER, 0); wed_w32(dev, MTK_WED_WDMA_INT_TRIGGER, 0); wdma_w32(dev, MTK_WDMA_INT_MASK, 0); wdma_w32(dev, MTK_WDMA_INT_GRP2, 0); - wed_w32(dev, MTK_WED_WPDMA_INT_MASK, 0); if (!mtk_wed_get_rx_capa(dev)) return; @@ -1093,7 +1093,6 @@ static void mtk_wed_deinit(struct mtk_wed_device *dev) { mtk_wed_stop(dev); - mtk_wed_dma_disable(dev); wed_clr(dev, MTK_WED_CTRL, MTK_WED_CTRL_WDMA_INT_AGENT_EN | @@ -2605,9 +2604,6 @@ mtk_wed_irq_get(struct mtk_wed_device *dev, u32 mask) static void mtk_wed_irq_set_mask(struct mtk_wed_device *dev, u32 mask) { - if (!dev->running) - return; - mtk_wed_set_ext_int(dev, !!mask); wed_w32(dev, MTK_WED_INT_MASK, mask); } -- cgit v1.3.1 From cf16ffa17c398434a77b8a373e69287c95b60de2 Mon Sep 17 00:00:00 2001 From: Coia Prant Date: Mon, 15 Apr 2024 07:26:25 -0700 Subject: USB: serial: option: add Lonsung U8300/U9300 product Update the USB serial option driver to support Longsung U8300/U9300. For U8300 Interface 4 is used by for QMI interface in stock firmware of U8300, the router which uses U8300 modem. Interface 5 is used by for ADB interface in stock firmware of U8300, the router which uses U8300 modem. Interface mapping is: 0: unknown (Debug), 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI, 5: ADB T: Bus=05 Lev=01 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b05 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms For U9300 Interface 1 is used by for ADB interface in stock firmware of U9300, the router which uses U9300 modem. Interface 4 is used by for QMI interface in stock firmware of U9300, the router which uses U9300 modem. Interface mapping is: 0: ADB, 1: AT (Modem), 2: AT, 3: PPP (NDIS / Pipe), 4: QMI Note: Interface 3 of some models of the U9300 series can send AT commands. T: Bus=05 Lev=01 Prnt=05 Port=04 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=9b3c Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms Tested successfully using Modem Manager on U9300. Tested successfully AT commands using If=1, If=2 and If=3 on U9300. Signed-off-by: Coia Prant Reviewed-by: Lars Melin [ johan: drop product defines, trim commit message ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ad0fff1e889d..8827ca3a6595 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2068,6 +2068,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff), .driver_info = RSVD(4) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b05), /* Longsung U8300 */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE(LONGCHEER_VENDOR_ID, 0x9b3c), /* Longsung U9300 */ + .driver_info = RSVD(0) | RSVD(4) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, -- cgit v1.3.1 From 311f97a4c7c22a01f8897bddf00428dfd0668e79 Mon Sep 17 00:00:00 2001 From: Vanillan Wang Date: Tue, 16 Apr 2024 18:02:55 +0800 Subject: USB: serial: option: add Rolling RW101-GL and RW135-GL support Update the USB serial option driver support for the Rolling LTE modules. - VID:PID 33f8:01a2, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a2: mbim, diag, at, pipe - VID:PID 33f8:01a3, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a3: mbim, pipe - VID:PID 33f8:01a4, RW101-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x01a4: mbim, diag, at, pipe - VID:PID 33f8:0104, RW101-GL for laptop debug M.2 cards(with RMNET interface for /Linux/Chrome OS) 0x0104: RMNET, diag, at, pipe - VID:PID 33f8:0115, RW135-GL for laptop debug M.2 cards(with MBIM interface for /Linux/Chrome OS) 0x0115: MBIM, diag, at, pipe Here are the outputs of usb-devices: T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a2 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a3 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 17 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=01a4 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1 P: Vendor=33f8 ProdID=0104 Rev=05.04 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=ba2eb033 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=33f8 ProdID=0115 Rev=05.15 S: Manufacturer=Rolling Wireless S.a.r.l. S: Product=Rolling Module S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Vanillan Wang Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 8827ca3a6595..e22612017f66 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2307,6 +2307,14 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ + { USB_DEVICE(0x33f8, 0x0104), /* Rolling RW101-GL (laptop RMNET) */ + .driver_info = RSVD(4) | RSVD(5) }, + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a2, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a3, 0xff) }, /* Rolling RW101-GL (laptop MBIM) */ + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x01a4, 0xff), /* Rolling RW101-GL (laptop MBIM) */ + .driver_info = RSVD(4) }, + { USB_DEVICE_INTERFACE_CLASS(0x33f8, 0x0115, 0xff), /* Rolling RW135-GL (laptop MBIM) */ + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x40) }, -- cgit v1.3.1 From def52db470df28d6f43cacbd21137f03b9502073 Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Tue, 16 Apr 2024 13:02:51 +0100 Subject: net: ravb: Count packets instead of descriptors in R-Car RX path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The units of "work done" in the RX path should be packets instead of descriptors. Descriptors which are used by the hardware to record error conditions or are empty in the case of a DMA mapping error should not count towards our RX work budget. Also make the limit variable unsigned as it can never be negative. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Paul Barker Reviewed-by: Sergey Shtylyov Reviewed-by: Niklas Söderlund Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index ba01c8cc3c90..7d231d011bff 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -892,29 +892,24 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; int entry = priv->cur_rx[q] % priv->num_rx_ring[q]; - int boguscnt = (priv->dirty_rx[q] + priv->num_rx_ring[q]) - - priv->cur_rx[q]; struct net_device_stats *stats = &priv->stats[q]; struct ravb_ex_rx_desc *desc; + unsigned int limit, i; struct sk_buff *skb; dma_addr_t dma_addr; struct timespec64 ts; + int rx_packets = 0; u8 desc_status; u16 pkt_len; - int limit; - boguscnt = min(boguscnt, *quota); - limit = boguscnt; + limit = priv->dirty_rx[q] + priv->num_rx_ring[q] - priv->cur_rx[q]; desc = &priv->rx_ring[q].ex_desc[entry]; - while (desc->die_dt != DT_FEMPTY) { + for (i = 0; i < limit && rx_packets < *quota && desc->die_dt != DT_FEMPTY; i++) { /* Descriptor type must be checked before all other reads */ dma_rmb(); desc_status = desc->msc; pkt_len = le16_to_cpu(desc->ds_cc) & RX_DS; - if (--boguscnt < 0) - break; - /* We use 0-byte descriptors to mark the DMA mapping errors */ if (!pkt_len) continue; @@ -960,7 +955,7 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) if (ndev->features & NETIF_F_RXCSUM) ravb_rx_csum(skb); napi_gro_receive(&priv->napi[q], skb); - stats->rx_packets++; + rx_packets++; stats->rx_bytes += pkt_len; } @@ -995,9 +990,9 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) desc->die_dt = DT_FEMPTY; } - *quota -= limit - (++boguscnt); - - return boguscnt <= 0; + stats->rx_packets += rx_packets; + *quota -= rx_packets; + return *quota == 0; } /* Packet receive function for Ethernet AVB */ -- cgit v1.3.1 From a892493a343494bd6bab9d098593932077ff3c43 Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Tue, 16 Apr 2024 13:02:52 +0100 Subject: net: ravb: Allow RX loop to move past DMA mapping errors The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop iteration if a zero-length descriptor is seen (indicating a DMA mapping error). However, the current RX descriptor index `priv->cur_rx[q]` was incremented at the end of the loop and so would not be incremented when we skip to the next loop iteration. This would cause the loop to keep seeing the same zero-length descriptor instead of moving on to the next descriptor. As the loop counter `i` still increments, the loop would eventually terminate so there is no risk of being stuck here forever - but we should still fix this to avoid wasting cycles. To fix this, the RX descriptor index is incremented at the top of the loop, in the for statement itself. The assignments of `entry` and `desc` are brought into the loop to avoid the need for duplication. Fixes: d8b48911fd24 ("ravb: fix ring memory allocation") Signed-off-by: Paul Barker Reviewed-by: Sergey Shtylyov Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 7d231d011bff..3b870926af14 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -775,12 +775,15 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) int limit; int i; - entry = priv->cur_rx[q] % priv->num_rx_ring[q]; limit = priv->dirty_rx[q] + priv->num_rx_ring[q] - priv->cur_rx[q]; stats = &priv->stats[q]; - desc = &priv->rx_ring[q].desc[entry]; - for (i = 0; i < limit && rx_packets < *quota && desc->die_dt != DT_FEMPTY; i++) { + for (i = 0; i < limit; i++, priv->cur_rx[q]++) { + entry = priv->cur_rx[q] % priv->num_rx_ring[q]; + desc = &priv->rx_ring[q].desc[entry]; + if (rx_packets == *quota || desc->die_dt == DT_FEMPTY) + break; + /* Descriptor type must be checked before all other reads */ dma_rmb(); desc_status = desc->msc; @@ -848,9 +851,6 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) break; } } - - entry = (++priv->cur_rx[q]) % priv->num_rx_ring[q]; - desc = &priv->rx_ring[q].desc[entry]; } /* Refill the RX ring buffers. */ @@ -891,7 +891,6 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) { struct ravb_private *priv = netdev_priv(ndev); const struct ravb_hw_info *info = priv->info; - int entry = priv->cur_rx[q] % priv->num_rx_ring[q]; struct net_device_stats *stats = &priv->stats[q]; struct ravb_ex_rx_desc *desc; unsigned int limit, i; @@ -901,10 +900,15 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) int rx_packets = 0; u8 desc_status; u16 pkt_len; + int entry; limit = priv->dirty_rx[q] + priv->num_rx_ring[q] - priv->cur_rx[q]; - desc = &priv->rx_ring[q].ex_desc[entry]; - for (i = 0; i < limit && rx_packets < *quota && desc->die_dt != DT_FEMPTY; i++) { + for (i = 0; i < limit; i++, priv->cur_rx[q]++) { + entry = priv->cur_rx[q] % priv->num_rx_ring[q]; + desc = &priv->rx_ring[q].ex_desc[entry]; + if (rx_packets == *quota || desc->die_dt == DT_FEMPTY) + break; + /* Descriptor type must be checked before all other reads */ dma_rmb(); desc_status = desc->msc; @@ -958,9 +962,6 @@ static bool ravb_rx_rcar(struct net_device *ndev, int *quota, int q) rx_packets++; stats->rx_bytes += pkt_len; } - - entry = (++priv->cur_rx[q]) % priv->num_rx_ring[q]; - desc = &priv->rx_ring[q].ex_desc[entry]; } /* Refill the RX ring buffers. */ -- cgit v1.3.1 From c7c449502b51c5b5de79f97a42be750b28f6ecee Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Tue, 16 Apr 2024 13:02:53 +0100 Subject: net: ravb: Fix GbEth jumbo packet RX checksum handling Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following backtrace: WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38 Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT) pc : skb_trim+0x30/0x38 lr : ravb_rx_csum_gbeth+0x40/0x90 Call trace: skb_trim+0x30/0x38 ravb_rx_gbeth+0x56c/0x5cc ravb_poll+0xa0/0x204 __napi_poll+0x38/0x17c This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the wrong skb for a packet which spans multiple descriptors. To fix this, use the correct skb. Fixes: c2da9408579d ("ravb: Add Rx checksum offload support for GbEth") Signed-off-by: Paul Barker Reviewed-by: Sergey Shtylyov Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 3b870926af14..6969cdeeb67a 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -843,7 +843,7 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) priv->rx_1st_skb->protocol = eth_type_trans(priv->rx_1st_skb, ndev); if (ndev->features & NETIF_F_RXCSUM) - ravb_rx_csum_gbeth(skb); + ravb_rx_csum_gbeth(priv->rx_1st_skb); napi_gro_receive(&priv->napi[q], priv->rx_1st_skb); rx_packets++; -- cgit v1.3.1 From 2e36c9fbc476f95a1b19e3fa0a2cdf408475ff56 Mon Sep 17 00:00:00 2001 From: Paul Barker Date: Tue, 16 Apr 2024 13:02:54 +0100 Subject: net: ravb: Fix RX byte accounting for jumbo packets The RX byte accounting for jumbo packets was changed to fix a potential use-after-free bug. However, that fix used the wrong variable and so only accounted for the number of bytes in the final descriptor, not the number of bytes in the whole packet. To fix this, we can simply update our stats with the correct number of bytes before calling napi_gro_receive(). Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future confusion. The variable name pkt_len is correct in ravb_rx_rcar() as that function does not handle packets spanning multiple descriptors. Fixes: 5a5a3e564de6 ("ravb: Fix potential use-after-free in ravb_rx_gbeth()") Signed-off-by: Paul Barker Reviewed-by: Sergey Shtylyov Signed-off-by: Paolo Abeni --- drivers/net/ethernet/renesas/ravb_main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index 6969cdeeb67a..fcb756d77681 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -769,7 +769,7 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) dma_addr_t dma_addr; int rx_packets = 0; u8 desc_status; - u16 pkt_len; + u16 desc_len; u8 die_dt; int entry; int limit; @@ -787,10 +787,10 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) /* Descriptor type must be checked before all other reads */ dma_rmb(); desc_status = desc->msc; - pkt_len = le16_to_cpu(desc->ds_cc) & RX_DS; + desc_len = le16_to_cpu(desc->ds_cc) & RX_DS; /* We use 0-byte descriptors to mark the DMA mapping errors */ - if (!pkt_len) + if (!desc_len) continue; if (desc_status & MSC_MC) @@ -811,25 +811,25 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) switch (die_dt) { case DT_FSINGLE: skb = ravb_get_skb_gbeth(ndev, entry, desc); - skb_put(skb, pkt_len); + skb_put(skb, desc_len); skb->protocol = eth_type_trans(skb, ndev); if (ndev->features & NETIF_F_RXCSUM) ravb_rx_csum_gbeth(skb); napi_gro_receive(&priv->napi[q], skb); rx_packets++; - stats->rx_bytes += pkt_len; + stats->rx_bytes += desc_len; break; case DT_FSTART: priv->rx_1st_skb = ravb_get_skb_gbeth(ndev, entry, desc); - skb_put(priv->rx_1st_skb, pkt_len); + skb_put(priv->rx_1st_skb, desc_len); break; case DT_FMID: skb = ravb_get_skb_gbeth(ndev, entry, desc); skb_copy_to_linear_data_offset(priv->rx_1st_skb, priv->rx_1st_skb->len, skb->data, - pkt_len); - skb_put(priv->rx_1st_skb, pkt_len); + desc_len); + skb_put(priv->rx_1st_skb, desc_len); dev_kfree_skb(skb); break; case DT_FEND: @@ -837,17 +837,17 @@ static bool ravb_rx_gbeth(struct net_device *ndev, int *quota, int q) skb_copy_to_linear_data_offset(priv->rx_1st_skb, priv->rx_1st_skb->len, skb->data, - pkt_len); - skb_put(priv->rx_1st_skb, pkt_len); + desc_len); + skb_put(priv->rx_1st_skb, desc_len); dev_kfree_skb(skb); priv->rx_1st_skb->protocol = eth_type_trans(priv->rx_1st_skb, ndev); if (ndev->features & NETIF_F_RXCSUM) ravb_rx_csum_gbeth(priv->rx_1st_skb); + stats->rx_bytes += priv->rx_1st_skb->len; napi_gro_receive(&priv->napi[q], priv->rx_1st_skb); rx_packets++; - stats->rx_bytes += pkt_len; break; } } -- cgit v1.3.1 From 3aadf100f93d80815685493d60cd8cab206403df Mon Sep 17 00:00:00 2001 From: "Jason A. Donenfeld" Date: Thu, 18 Apr 2024 13:45:17 +0200 Subject: Revert "vmgenid: emit uevent when VMGENID updates" This reverts commit ad6bcdad2b6724e113f191a12f859a9e8456b26d. I had nak'd it, and Greg said on the thread that it links that he wasn't going to take it either, especially since it's not his code or his tree, but then, seemingly accidentally, it got pushed up some months later, in what looks like a mistake, with no further discussion in the linked thread. So revert it, since it's clearly not intended. Fixes: ad6bcdad2b67 ("vmgenid: emit uevent when VMGENID updates") Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20230531095119.11202-2-bchalios@amazon.es Signed-off-by: Jason A. Donenfeld --- drivers/virt/vmgenid.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/virt/vmgenid.c b/drivers/virt/vmgenid.c index b67a28da4702..a1c467a0e9f7 100644 --- a/drivers/virt/vmgenid.c +++ b/drivers/virt/vmgenid.c @@ -68,7 +68,6 @@ out: static void vmgenid_notify(struct acpi_device *device, u32 event) { struct vmgenid_state *state = acpi_driver_data(device); - char *envp[] = { "NEW_VMGENID=1", NULL }; u8 old_id[VMGENID_SIZE]; memcpy(old_id, state->this_id, sizeof(old_id)); @@ -76,7 +75,6 @@ static void vmgenid_notify(struct acpi_device *device, u32 event) if (!memcmp(old_id, state->this_id, sizeof(old_id))) return; add_vmfork_randomness(state->this_id, sizeof(state->this_id)); - kobject_uevent_env(&device->dev.kobj, KOBJ_CHANGE, envp); } static const struct acpi_device_id vmgenid_ids[] = { -- cgit v1.3.1 From 1607830dadeefc407e4956336d9fcd9e9defd810 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Apr 2024 16:33:28 +0200 Subject: Revert "usb: cdc-wdm: close race between read and workqueue" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 339f83612f3a569b194680768b22bf113c26a29d. It has been found to cause problems in a number of Chromebook devices, so revert the change until it can be brought back in a safe way. Link: https://lore.kernel.org/r/385a3519-b45d-48c5-a6fd-a3fdb6bec92f@chromium.org Reported-by:: Aleksander Morgado Fixes: 339f83612f3a ("usb: cdc-wdm: close race between read and workqueue") Cc: stable Cc: Oliver Neukum Cc: Bjørn Mork Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c8262e2f2917..c553decb5461 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -485,7 +485,6 @@ out_free_mem: static int service_outstanding_interrupt(struct wdm_device *desc) { int rv = 0; - int used; /* submit read urb only if the device is waiting for it */ if (!desc->resp_count || !--desc->resp_count) @@ -500,10 +499,7 @@ static int service_outstanding_interrupt(struct wdm_device *desc) goto out; } - used = test_and_set_bit(WDM_RESPONDING, &desc->flags); - if (used) - goto out; - + set_bit(WDM_RESPONDING, &desc->flags); spin_unlock_irq(&desc->iuspin); rv = usb_submit_urb(desc->response, GFP_KERNEL); spin_lock_irq(&desc->iuspin); -- cgit v1.3.1 From f2e0eee4703869dc5edb5302a919861566ca7797 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Tue, 16 Apr 2024 01:23:07 +0000 Subject: usb: dwc3: ep0: Don't reset resource alloc flag The DWC3_EP_RESOURCE_ALLOCATED flag ensures that the resource of an endpoint is only assigned once. Unless the endpoint is reset, don't clear this flag. Otherwise we may set endpoint resource again, which prevents the driver from initiate transfer after handling a STALL or endpoint halt to the control endpoint. Cc: stable@vger.kernel.org Fixes: b311048c174d ("usb: dwc3: gadget: Rewrite endpoint allocation flow") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/00122b7cc5be06abef461776e7cc9f5ebc8bc1cb.1713229786.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/ep0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 72bb722da2f2..d96ffbe52039 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -226,7 +226,8 @@ void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) /* reinitialize physical ep1 */ dep = dwc->eps[1]; - dep->flags = DWC3_EP_ENABLED; + dep->flags &= DWC3_EP_RESOURCE_ALLOCATED; + dep->flags |= DWC3_EP_ENABLED; /* stall is always issued on EP0 */ dep = dwc->eps[0]; -- cgit v1.3.1 From 582ee2f9d268d302595db3e36b985e5cbb93284d Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Thu, 18 Apr 2024 13:34:30 +0200 Subject: USB: serial: option: add Telit FN920C04 rmnet compositions Add the following Telit FN920C04 compositions: 0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a0 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag) T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a4 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb T: Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=10a9 Rev=05.15 S: Manufacturer=Telit Cinterion S: Product=FN920 S: SerialNumber=92c4c4d8 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Daniele Palmas Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e22612017f66..8a5846d4adf6 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1376,6 +1376,12 @@ static const struct usb_device_id option_ids[] = { .driver_info = NCTRL(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1083, 0xff), /* Telit FE990 (ECM) */ .driver_info = NCTRL(0) | RSVD(1) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a0, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a4, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(3) }, + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x10a9, 0xff), /* Telit FN20C04 (rmnet) */ + .driver_info = RSVD(0) | NCTRL(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), -- cgit v1.3.1 From 56f78615bcb1c3ba58a5d9911bad3d9185cf141b Mon Sep 17 00:00:00 2001 From: Jose Ignacio Tornos Martinez Date: Wed, 17 Apr 2024 10:55:13 +0200 Subject: net: usb: ax88179_178a: avoid writing the mac address before first reading After the commit d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets"), reset operation, in which the default mac address from the device is read, is not executed from bind operation and the random address, that is pregenerated just in case, is direclty written the first time in the device, so the default one from the device is not even read. This writing is not dangerous because is volatile and the default mac address is not missed. In order to avoid this and keep the simplification to have only one reset and reduce the delays, restore the reset from bind operation and remove the reset that is commanded from open operation. The behavior is the same but everything is ready for usbnet_probe. Tested with ASIX AX88179 USB Gigabit Ethernet devices. Restore the old behavior for the rest of possible devices because I don't have the hardware to test. cc: stable@vger.kernel.org # 6.6+ Fixes: d2689b6a86b9 ("net: usb: ax88179_178a: avoid two consecutive device resets") Reported-by: Jarkko Palviainen Signed-off-by: Jose Ignacio Tornos Martinez Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com Signed-off-by: Jakub Kicinski --- drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index a9c418890a1c..752f821a1990 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1317,6 +1317,8 @@ static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf) netif_set_tso_max_size(dev->net, 16384); + ax88179_reset(dev); + return 0; } @@ -1695,7 +1697,6 @@ static const struct driver_info ax88179_info = { .unbind = ax88179_unbind, .status = ax88179_status, .link_reset = ax88179_link_reset, - .reset = ax88179_reset, .stop = ax88179_stop, .flags = FLAG_ETHER | FLAG_FRAMING_AX, .rx_fixup = ax88179_rx_fixup, @@ -1708,7 +1709,6 @@ static const struct driver_info ax88178a_info = { .unbind = ax88179_unbind, .status = ax88179_status, .link_reset = ax88179_link_reset, - .reset = ax88179_reset, .stop = ax88179_stop, .flags = FLAG_ETHER | FLAG_FRAMING_AX, .rx_fixup = ax88179_rx_fixup, -- cgit v1.3.1 From c24cd679b075b0e953ea167b0aa2b2d59e4eba7f Mon Sep 17 00:00:00 2001 From: Siddharth Vadapalli Date: Wed, 17 Apr 2024 15:24:25 +0530 Subject: net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them The TX and RX DMA Channels used by the driver to exchange data with CPSW are not guaranteed to be in a clean state during driver initialization. The Bootloader could have used the same DMA Channels without cleaning them up in the event of failure. Thus, reset and disable the DMA Channels to ensure that they are in a clean state before using them. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Reported-by: Schuyler Patton Signed-off-by: Siddharth Vadapalli Reviewed-by: Roger Quadros Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com Signed-off-by: Jakub Kicinski --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) (limited to 'drivers') diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c index 2939a21ca74f..1d00e21808c1 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c @@ -2793,6 +2793,8 @@ static void am65_cpsw_unregister_devlink(struct am65_cpsw_common *common) static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common) { + struct am65_cpsw_rx_chn *rx_chan = &common->rx_chns; + struct am65_cpsw_tx_chn *tx_chan = common->tx_chns; struct device *dev = common->dev; struct am65_cpsw_port *port; int ret = 0, i; @@ -2805,6 +2807,22 @@ static int am65_cpsw_nuss_register_ndevs(struct am65_cpsw_common *common) if (ret) return ret; + /* The DMA Channels are not guaranteed to be in a clean state. + * Reset and disable them to ensure that they are back to the + * clean state and ready to be used. + */ + for (i = 0; i < common->tx_ch_num; i++) { + k3_udma_glue_reset_tx_chn(tx_chan[i].tx_chn, &tx_chan[i], + am65_cpsw_nuss_tx_cleanup); + k3_udma_glue_disable_tx_chn(tx_chan[i].tx_chn); + } + + for (i = 0; i < AM65_CPSW_MAX_RX_FLOWS; i++) + k3_udma_glue_reset_rx_chn(rx_chan->rx_chn, i, rx_chan, + am65_cpsw_nuss_rx_cleanup, !!i); + + k3_udma_glue_disable_rx_chn(rx_chan->rx_chn); + ret = am65_cpsw_nuss_register_devlink(common); if (ret) return ret; -- cgit v1.3.1 From b552f63cd43735048bbe9bfbb7a9dcfce166fbdd Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Mon, 15 Apr 2024 21:02:12 +0200 Subject: thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up() The count field in struct trip_stats, representing the number of times the zone temperature was above the trip point, needs to be incremented in thermal_debug_tz_trip_up(), for two reasons. First, if a trip point is crossed on the way up for the first time, thermal_debug_update_temp() called from update_temperature() does not see it because it has not been added to trips_crossed[] array in the thermal zone's struct tz_debugfs object yet. Therefore, when thermal_debug_tz_trip_up() is called after that, the trip point's count value is 0, and the attempt to divide by it during the average temperature computation leads to a divide error which causes the kernel to crash. Setting the count to 1 before the division by incrementing it fixes this problem. Second, if a trip point is crossed on the way up, but it has been crossed on the way up already before, its count value needs to be incremented to make a record of the fact that the zone temperature is above the trip now. Without doing that, if the mitigations applied after crossing the trip cause the zone temperature to drop below its threshold, the count will not be updated for this episode at all and the average temperature in the trip statistics record will be somewhat higher than it should be. Fixes: 7ef01f228c9f ("thermal/debugfs: Add thermal debugfs information for mitigation episodes") Cc :6.8+ # 6.8+ Signed-off-by: Rafael J. Wysocki --- drivers/thermal/thermal_debugfs.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/thermal/thermal_debugfs.c b/drivers/thermal/thermal_debugfs.c index c617e8b9f0dd..d78d54ae2605 100644 --- a/drivers/thermal/thermal_debugfs.c +++ b/drivers/thermal/thermal_debugfs.c @@ -616,6 +616,7 @@ void thermal_debug_tz_trip_up(struct thermal_zone_device *tz, tze->trip_stats[trip_id].timestamp = now; tze->trip_stats[trip_id].max = max(tze->trip_stats[trip_id].max, temperature); tze->trip_stats[trip_id].min = min(tze->trip_stats[trip_id].min, temperature); + tze->trip_stats[trip_id].count++; tze->trip_stats[trip_id].avg = tze->trip_stats[trip_id].avg + (temperature - tze->trip_stats[trip_id].avg) / tze->trip_stats[trip_id].count; -- cgit v1.3.1