From 86b27d8050b6b2aec31063fa9f40b16fb347afb3 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Fri, 11 Feb 2011 20:47:45 +0000 Subject: drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch If the gpu is hung, then whatever was inside the render cache is lost and there is little point waiting for it. Or complaining if we see an EIO or EAGAIN instead. So, if the GPU is indeed in its death throes when we need to rewrite the registers for a new framebuffer, just ignore the error and proceed with the update. Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 3b006536b3d2..dcb821737f38 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1630,19 +1630,19 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, struct drm_i915_gem_object *obj = to_intel_framebuffer(old_fb)->obj; wait_event(dev_priv->pending_flip_queue, + atomic_read(&dev_priv->mm.wedged) || atomic_read(&obj->pending_flip) == 0); /* Big Hammer, we also need to ensure that any pending * MI_WAIT_FOR_EVENT inside a user batch buffer on the * current scanout is retired before unpinning the old * framebuffer. + * + * This should only fail upon a hung GPU, in which case we + * can safely continue. */ ret = i915_gem_object_flush_gpu(obj, false); - if (ret) { - i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj); - mutex_unlock(&dev->struct_mutex); - return ret; - } + (void) ret; } ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y, -- cgit v1.2.3-70-g09d2 From a36dbec57e9a665d69cd2e1a673153ddb2d62785 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 11 Feb 2011 14:44:51 -0800 Subject: drm/i915: don't enable FDI & transcoder interrupts after all We can enable some safely, but FDI and transcoder interrupts can occur and block other interrupts from being detected (like port hotplug events). So keep them disabled by default (they can be re-enabled for debugging display bringup, but should generally be off). Signed-off-by: Jesse Barnes Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 97f946dcc1aa..8a9e08bf1cf7 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -316,6 +316,8 @@ static void i915_hotplug_work_func(struct work_struct *work) struct drm_mode_config *mode_config = &dev->mode_config; struct intel_encoder *encoder; + DRM_DEBUG_KMS("running encoder hotplug functions\n"); + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) if (encoder->hot_plug) encoder->hot_plug(encoder); @@ -1649,9 +1651,7 @@ static int ironlake_irq_postinstall(struct drm_device *dev) } else { hotplug_mask = SDE_CRT_HOTPLUG | SDE_PORTB_HOTPLUG | SDE_PORTC_HOTPLUG | SDE_PORTD_HOTPLUG; - hotplug_mask |= SDE_AUX_MASK | SDE_FDI_MASK | SDE_TRANS_MASK; - I915_WRITE(FDI_RXA_IMR, 0); - I915_WRITE(FDI_RXB_IMR, 0); + hotplug_mask |= SDE_AUX_MASK; } dev_priv->pch_irq_mask = ~hotplug_mask; -- cgit v1.2.3-70-g09d2 From bdb8b975fc66e081c3f39be6267701f8226d11aa Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Wed, 22 Dec 2010 11:37:09 +0000 Subject: agp/intel: Experiment with a 855GM GWB bit Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187 Tested-by: Thorsten Vollmer (DFI-ACP G5M150-N w/852GME) Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM) Tested-by: Indan Zupancic (Thinkpad X40/855GM rev 02) Tested-by: Eric Anholt (865G) Signed-off-by: Chris Wilson --- drivers/char/agp/intel-agp.h | 1 + drivers/char/agp/intel-gtt.c | 56 +++++++++++++++++--------------------------- 2 files changed, 22 insertions(+), 35 deletions(-) (limited to 'drivers') diff --git a/drivers/char/agp/intel-agp.h b/drivers/char/agp/intel-agp.h index c195bfeade11..5feebe2800e9 100644 --- a/drivers/char/agp/intel-agp.h +++ b/drivers/char/agp/intel-agp.h @@ -130,6 +130,7 @@ #define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) #define I915_IFPADDR 0x60 +#define I830_HIC 0x70 /* Intel 965G registers */ #define I965_MSAC 0x62 diff --git a/drivers/char/agp/intel-gtt.c b/drivers/char/agp/intel-gtt.c index fab3d3265adb..0d09b537bb9a 100644 --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include "agp.h" #include "intel-agp.h" @@ -70,12 +71,8 @@ static struct _intel_private { u32 __iomem *gtt; /* I915G */ bool clear_fake_agp; /* on first access via agp, fill with scratch */ int num_dcache_entries; - union { - void __iomem *i9xx_flush_page; - void *i8xx_flush_page; - }; + void __iomem *i9xx_flush_page; char *i81x_gtt_table; - struct page *i8xx_page; struct resource ifp_resource; int resource_valid; struct page *scratch_page; @@ -722,28 +719,6 @@ static int intel_fake_agp_fetch_size(void) static void i830_cleanup(void) { - if (intel_private.i8xx_flush_page) { - kunmap(intel_private.i8xx_flush_page); - intel_private.i8xx_flush_page = NULL; - } - - __free_page(intel_private.i8xx_page); - intel_private.i8xx_page = NULL; -} - -static void intel_i830_setup_flush(void) -{ - /* return if we've already set the flush mechanism up */ - if (intel_private.i8xx_page) - return; - - intel_private.i8xx_page = alloc_page(GFP_KERNEL); - if (!intel_private.i8xx_page) - return; - - intel_private.i8xx_flush_page = kmap(intel_private.i8xx_page); - if (!intel_private.i8xx_flush_page) - i830_cleanup(); } /* The chipset_flush interface needs to get data that has already been @@ -758,14 +733,27 @@ static void intel_i830_setup_flush(void) */ static void i830_chipset_flush(void) { - unsigned int *pg = intel_private.i8xx_flush_page; + unsigned long timeout = jiffies + msecs_to_jiffies(1000); + + /* Forcibly evict everything from the CPU write buffers. + * clflush appears to be insufficient. + */ + wbinvd_on_all_cpus(); + + /* Now we've only seen documents for this magic bit on 855GM, + * we hope it exists for the other gen2 chipsets... + * + * Also works as advertised on my 845G. + */ + writel(readl(intel_private.registers+I830_HIC) | (1<<31), + intel_private.registers+I830_HIC); - memset(pg, 0, 1024); + while (readl(intel_private.registers+I830_HIC) & (1<<31)) { + if (time_after(jiffies, timeout)) + break; - if (cpu_has_clflush) - clflush_cache_range(pg, 1024); - else if (wbinvd_on_all_cpus() != 0) - printk(KERN_ERR "Timed out waiting for cache flush.\n"); + udelay(50); + } } static void i830_write_entry(dma_addr_t addr, unsigned int entry, @@ -849,8 +837,6 @@ static int i830_setup(void) intel_private.gtt_bus_addr = reg_addr + I810_PTE_BASE; - intel_i830_setup_flush(); - return 0; } -- cgit v1.2.3-70-g09d2 From 011b9910bdaf2e52c48c012490ab444fceea1959 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 15 Feb 2011 15:08:02 -0800 Subject: drm/i915: skip FDI & PCH enabling for DP_A eDP on the CPU doesn't need the PCH set up at all, it can in fact cause problems. So avoid FDI training and PCH PLL enabling in that case. Signed-off-by: Jesse Barnes Tested-by: Andy Whitcroft Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/intel_display.c | 83 +++++++++++++++++++++++++++++++++++- 1 file changed, 81 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index dcb821737f38..9ca1bb2554fc 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -2045,6 +2045,31 @@ static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) atomic_read(&obj->pending_flip) == 0); } +static bool intel_crtc_driving_pch(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct intel_encoder *encoder; + + /* + * If there's a non-PCH eDP on this crtc, it must be DP_A, and that + * must be driven by its own crtc; no sharing is possible. + */ + list_for_each_entry(encoder, &mode_config->encoder_list, base.head) { + if (encoder->base.crtc != crtc) + continue; + + switch (encoder->type) { + case INTEL_OUTPUT_EDP: + if (!intel_encoder_is_pch_edp(&encoder->base)) + return false; + continue; + } + } + + return true; +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -2053,6 +2078,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; u32 reg, temp; + bool is_pch_port = false; if (intel_crtc->active) return; @@ -2066,7 +2092,56 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(PCH_LVDS, temp | LVDS_PORT_EN); } - ironlake_fdi_enable(crtc); + is_pch_port = intel_crtc_driving_pch(crtc); + + if (is_pch_port) + ironlake_fdi_enable(crtc); + else { + /* disable CPU FDI tx and PCH FDI rx */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + I915_WRITE(reg, temp & ~FDI_TX_ENABLE); + POSTING_READ(reg); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(0x7 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp & ~FDI_RX_ENABLE); + + POSTING_READ(reg); + udelay(100); + + /* Ironlake workaround, disable clock pointer after downing FDI */ + if (HAS_PCH_IBX(dev)) + I915_WRITE(FDI_RX_CHICKEN(pipe), + I915_READ(FDI_RX_CHICKEN(pipe) & + ~FDI_RX_PHASE_SYNC_POINTER_ENABLE)); + + /* still set train pattern 1 */ + reg = FDI_TX_CTL(pipe); + temp = I915_READ(reg); + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + I915_WRITE(reg, temp); + + reg = FDI_RX_CTL(pipe); + temp = I915_READ(reg); + if (HAS_PCH_CPT(dev)) { + temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT; + temp |= FDI_LINK_TRAIN_PATTERN_1_CPT; + } else { + temp &= ~FDI_LINK_TRAIN_NONE; + temp |= FDI_LINK_TRAIN_PATTERN_1; + } + /* BPC in FDI rx is consistent with that in PIPECONF */ + temp &= ~(0x07 << 16); + temp |= (I915_READ(PIPECONF(pipe)) & PIPE_BPC_MASK) << 11; + I915_WRITE(reg, temp); + + POSTING_READ(reg); + udelay(100); + } /* Enable panel fitting for LVDS */ if (dev_priv->pch_pf_size && @@ -2100,6 +2175,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_flush_display_plane(dev, plane); } + /* Skip the PCH stuff if possible */ + if (!is_pch_port) + goto done; + /* For PCH output, training FDI link */ if (IS_GEN6(dev)) gen6_fdi_link_train(crtc); @@ -2184,7 +2263,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) I915_WRITE(reg, temp | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("failed to enable transcoder %d\n", pipe); - +done: intel_crtc_load_lut(crtc); intel_update_fbc(dev); intel_crtc_update_cursor(crtc, true); -- cgit v1.2.3-70-g09d2 From c2e0eb167070a6e9dcb49c84c13c79a30d672431 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 22 Feb 2011 18:25:49 +0100 Subject: drm/i915: fix corruptions on i8xx due to relaxed fencing It looks like gen2 has a peculiar interleaved 2-row inter-tile layout. Probably inherited from i81x which had 2kb tiles (which naturally fit an even-number-of-tile-rows scheme to fit onto 4kb pages). There is no other mention of this in any docs (also not in the Intel internal documention according to Chris Wilson). Problem manifests itself in corruptions in the second half of the last tile row (if the bo has an odd number of tiles). Which can only happen with relaxed tiling (introduced in a00b10c360b35d6431a9). So reject set_tiling calls that don't satisfy this constrain to prevent broken userspace from causing havoc. While at it, also check the size for newer chipsets. LKML: https://lkml.org/lkml/2011/2/19/5 Reported-by: Indan Zupancic Tested-by: Indan Zupancic Signed-off-by: Daniel Vetter Signed-off-by: Chris Wilson --- drivers/gpu/drm/i915/i915_gem_tiling.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/gpu/drm/i915/i915_gem_tiling.c b/drivers/gpu/drm/i915/i915_gem_tiling.c index 22a32b9932c5..79a04fde69b5 100644 --- a/drivers/gpu/drm/i915/i915_gem_tiling.c +++ b/drivers/gpu/drm/i915/i915_gem_tiling.c @@ -184,7 +184,7 @@ i915_gem_detect_bit_6_swizzle(struct drm_device *dev) static bool i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) { - int tile_width; + int tile_width, tile_height; /* Linear is always fine */ if (tiling_mode == I915_TILING_NONE) @@ -215,6 +215,20 @@ i915_tiling_ok(struct drm_device *dev, int stride, int size, int tiling_mode) } } + if (IS_GEN2(dev) || + (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))) + tile_height = 32; + else + tile_height = 8; + /* i8xx is strange: It has 2 interleaved rows of tiles, so needs an even + * number of tile rows. */ + if (IS_GEN2(dev)) + tile_height *= 2; + + /* Size needs to be aligned to a full tile row */ + if (size & (tile_height * stride - 1)) + return false; + /* 965+ just needs multiples of tile width */ if (INTEL_INFO(dev)->gen >= 4) { if (stride & (tile_width - 1)) -- cgit v1.2.3-70-g09d2