From 48afb3112e6373a292e54d675e986a5da14c0516 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 26 May 2012 16:58:15 +0100 Subject: dmaengine: PL08x: remove circular_buffer boolean from channel data Circular buffers are not handled in this way; we have a separate API call now to setup circular buffers. So lets not mislead people with this bool. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- include/linux/amba/pl08x.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux/amba') diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 02549017212a..0f5b34d668b6 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -51,9 +51,6 @@ enum { * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring * this. - * @circular_buffer: whether the buffer passed in is circular and - * shall simply be looped round round (like a record baby round - * round round round) * @single: the device connected to this channel will request single DMA * transfers, not bursts. (Bursts are default.) * @periph_buses: the device connected to this channel is accessible via @@ -66,7 +63,6 @@ struct pl08x_channel_data { u32 muxval; u32 cctl; dma_addr_t addr; - bool circular_buffer; bool single; u8 periph_buses; }; -- cgit v1.2.3-70-g09d2 From aeea1808fe752e917b966961bde3e9603f206dec Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 17 May 2012 15:01:28 +0100 Subject: dmaengine: PL08x: clean up get_signal/put_signal Try to avoid dereferencing the DMA engine's channel struct in these platform helpers; instead, pass a pointer to the channel data into get_signal(), and the returned signal number to put_signal(). Tested-by: Linus Walleij Signed-off-by: Russell King --- drivers/dma/amba-pl08x.c | 4 ++-- include/linux/amba/pl08x.h | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'include/linux/amba') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 5821125f0458..cc08c8c01a9e 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -874,7 +874,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, * Can the platform allow us to use this channel? */ if (plchan->slave && pl08x->pd->get_signal) { - ret = pl08x->pd->get_signal(plchan); + ret = pl08x->pd->get_signal(plchan->cd); if (ret < 0) { dev_dbg(&pl08x->adev->dev, "unable to use physical channel %d for transfer on %s due to platform restrictions\n", @@ -909,7 +909,7 @@ static void release_phy_channel(struct pl08x_dma_chan *plchan) struct pl08x_driver_data *pl08x = plchan->host; if ((plchan->phychan->signal >= 0) && pl08x->pd->put_signal) { - pl08x->pd->put_signal(plchan); + pl08x->pd->put_signal(plchan->cd, plchan->phychan->signal); plchan->phychan->signal = -1; } pl08x_put_phy_channel(pl08x, plchan->phychan); diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 0f5b34d668b6..88765a62c8f2 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -225,8 +225,8 @@ struct pl08x_platform_data { const struct pl08x_channel_data *slave_channels; unsigned int num_slave_channels; struct pl08x_channel_data memcpy_channel; - int (*get_signal)(struct pl08x_dma_chan *); - void (*put_signal)(struct pl08x_dma_chan *); + int (*get_signal)(const struct pl08x_channel_data *); + void (*put_signal)(const struct pl08x_channel_data *, int); u8 lli_buses; u8 mem_buses; }; -- cgit v1.2.3-70-g09d2 From b23f204c8dbbed8e501442c47d7639aac21a3d84 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 May 2012 10:48:44 +0100 Subject: dmaengine: PL08x: move private data structures into amba-pl08x.c Move the driver private data structures into the driver itself, rather than having them exposed to everyone in a header file. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- drivers/dma/amba-pl08x.c | 136 +++++++++++++++++++++++++++++++++++++++++++ include/linux/amba/pl08x.h | 141 +-------------------------------------------- 2 files changed, 138 insertions(+), 139 deletions(-) (limited to 'include/linux/amba') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index cc08c8c01a9e..94949909e4e9 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -90,6 +90,7 @@ #define DRIVER_NAME "pl08xdmac" static struct amba_driver pl08x_amba_driver; +struct pl08x_driver_data; /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives @@ -118,6 +119,141 @@ struct pl08x_lli { u32 cctl; }; +/** + * struct pl08x_bus_data - information of source or destination + * busses for a transfer + * @addr: current address + * @maxwidth: the maximum width of a transfer on this bus + * @buswidth: the width of this bus in bytes: 1, 2 or 4 + */ +struct pl08x_bus_data { + dma_addr_t addr; + u8 maxwidth; + u8 buswidth; +}; + +/** + * struct pl08x_phy_chan - holder for the physical channels + * @id: physical index to this channel + * @lock: a lock to use when altering an instance of this struct + * @signal: the physical signal (aka channel) serving this physical channel + * right now + * @serving: the virtual channel currently being served by this physical + * channel + */ +struct pl08x_phy_chan { + unsigned int id; + void __iomem *base; + spinlock_t lock; + int signal; + struct pl08x_dma_chan *serving; +}; + +/** + * struct pl08x_sg - structure containing data per sg + * @src_addr: src address of sg + * @dst_addr: dst address of sg + * @len: transfer len in bytes + * @node: node for txd's dsg_list + */ +struct pl08x_sg { + dma_addr_t src_addr; + dma_addr_t dst_addr; + size_t len; + struct list_head node; +}; + +/** + * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @tx: async tx descriptor + * @node: node for txd list for channels + * @dsg_list: list of children sg's + * @direction: direction of transfer + * @llis_bus: DMA memory address (physical) start for the LLIs + * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd + */ +struct pl08x_txd { + struct dma_async_tx_descriptor tx; + struct list_head node; + struct list_head dsg_list; + enum dma_transfer_direction direction; + dma_addr_t llis_bus; + struct pl08x_lli *llis_va; + /* Default cctl value for LLIs */ + u32 cctl; + /* + * Settings to be put into the physical channel when we + * trigger this txd. Other registers are in llis_va[0]. + */ + u32 ccfg; +}; + +/** + * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel + * states + * @PL08X_CHAN_IDLE: the channel is idle + * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport + * channel and is running a transfer on it + * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport + * channel, but the transfer is currently paused + * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport + * channel to become available (only pertains to memcpy channels) + */ +enum pl08x_dma_chan_state { + PL08X_CHAN_IDLE, + PL08X_CHAN_RUNNING, + PL08X_CHAN_PAUSED, + PL08X_CHAN_WAITING, +}; + +/** + * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel + * @chan: wrappped abstract channel + * @phychan: the physical channel utilized by this channel, if there is one + * @phychan_hold: if non-zero, hold on to the physical channel even if we + * have no pending entries + * @tasklet: tasklet scheduled by the IRQ to handle actual work etc + * @name: name of channel + * @cd: channel platform data + * @runtime_addr: address for RX/TX according to the runtime config + * @runtime_direction: current direction of this channel according to + * runtime config + * @pend_list: queued transactions pending on this channel + * @at: active transaction on this channel + * @lock: a lock for this channel data + * @host: a pointer to the host (internal use) + * @state: whether the channel is idle, paused, running etc + * @slave: whether this channel is a device (slave) or for memcpy + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. + * @waiting: a TX descriptor on this channel which is waiting for a physical + * channel to become available + */ +struct pl08x_dma_chan { + struct dma_chan chan; + struct pl08x_phy_chan *phychan; + int phychan_hold; + struct tasklet_struct tasklet; + char *name; + const struct pl08x_channel_data *cd; + dma_addr_t src_addr; + dma_addr_t dst_addr; + u32 src_cctl; + u32 dst_cctl; + enum dma_transfer_direction runtime_direction; + struct list_head pend_list; + struct pl08x_txd *at; + spinlock_t lock; + struct pl08x_driver_data *host; + enum pl08x_dma_chan_state state; + bool slave; + bool device_fc; + struct pl08x_txd *waiting; +}; + /** * struct pl08x_driver_data - the local state holder for the PL08x * @slave: slave engine for this instance diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 88765a62c8f2..48d02bf66ec9 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -21,8 +21,9 @@ #include #include -struct pl08x_lli; struct pl08x_driver_data; +struct pl08x_phy_chan; +struct pl08x_txd; /* Bitmasks for selecting AHB ports for DMA transfers */ enum { @@ -67,144 +68,6 @@ struct pl08x_channel_data { u8 periph_buses; }; -/** - * Struct pl08x_bus_data - information of source or destination - * busses for a transfer - * @addr: current address - * @maxwidth: the maximum width of a transfer on this bus - * @buswidth: the width of this bus in bytes: 1, 2 or 4 - */ -struct pl08x_bus_data { - dma_addr_t addr; - u8 maxwidth; - u8 buswidth; -}; - -/** - * struct pl08x_phy_chan - holder for the physical channels - * @id: physical index to this channel - * @lock: a lock to use when altering an instance of this struct - * @signal: the physical signal (aka channel) serving this physical channel - * right now - * @serving: the virtual channel currently being served by this physical - * channel - * @locked: channel unavailable for the system, e.g. dedicated to secure - * world - */ -struct pl08x_phy_chan { - unsigned int id; - void __iomem *base; - spinlock_t lock; - int signal; - struct pl08x_dma_chan *serving; - bool locked; -}; - -/** - * struct pl08x_sg - structure containing data per sg - * @src_addr: src address of sg - * @dst_addr: dst address of sg - * @len: transfer len in bytes - * @node: node for txd's dsg_list - */ -struct pl08x_sg { - dma_addr_t src_addr; - dma_addr_t dst_addr; - size_t len; - struct list_head node; -}; - -/** - * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor - * @tx: async tx descriptor - * @node: node for txd list for channels - * @dsg_list: list of children sg's - * @direction: direction of transfer - * @llis_bus: DMA memory address (physical) start for the LLIs - * @llis_va: virtual memory address start for the LLIs - * @cctl: control reg values for current txd - * @ccfg: config reg values for current txd - */ -struct pl08x_txd { - struct dma_async_tx_descriptor tx; - struct list_head node; - struct list_head dsg_list; - enum dma_transfer_direction direction; - dma_addr_t llis_bus; - struct pl08x_lli *llis_va; - /* Default cctl value for LLIs */ - u32 cctl; - /* - * Settings to be put into the physical channel when we - * trigger this txd. Other registers are in llis_va[0]. - */ - u32 ccfg; -}; - -/** - * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel - * states - * @PL08X_CHAN_IDLE: the channel is idle - * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport - * channel and is running a transfer on it - * @PL08X_CHAN_PAUSED: the channel has allocated a physical transport - * channel, but the transfer is currently paused - * @PL08X_CHAN_WAITING: the channel is waiting for a physical transport - * channel to become available (only pertains to memcpy channels) - */ -enum pl08x_dma_chan_state { - PL08X_CHAN_IDLE, - PL08X_CHAN_RUNNING, - PL08X_CHAN_PAUSED, - PL08X_CHAN_WAITING, -}; - -/** - * struct pl08x_dma_chan - this structure wraps a DMA ENGINE channel - * @chan: wrappped abstract channel - * @phychan: the physical channel utilized by this channel, if there is one - * @phychan_hold: if non-zero, hold on to the physical channel even if we - * have no pending entries - * @tasklet: tasklet scheduled by the IRQ to handle actual work etc - * @name: name of channel - * @cd: channel platform data - * @runtime_addr: address for RX/TX according to the runtime config - * @runtime_direction: current direction of this channel according to - * runtime config - * @pend_list: queued transactions pending on this channel - * @at: active transaction on this channel - * @lock: a lock for this channel data - * @host: a pointer to the host (internal use) - * @state: whether the channel is idle, paused, running etc - * @slave: whether this channel is a device (slave) or for memcpy - * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave - * channels. Fill with 'true' if peripheral should be flow controller. Direction - * will be selected at Runtime. - * @waiting: a TX descriptor on this channel which is waiting for a physical - * channel to become available - */ -struct pl08x_dma_chan { - struct dma_chan chan; - struct pl08x_phy_chan *phychan; - int phychan_hold; - struct tasklet_struct tasklet; - char *name; - const struct pl08x_channel_data *cd; - dma_addr_t src_addr; - dma_addr_t dst_addr; - u32 src_cctl; - u32 dst_cctl; - enum dma_transfer_direction runtime_direction; - struct list_head pend_list; - struct pl08x_txd *at; - spinlock_t lock; - struct pl08x_driver_data *host; - enum pl08x_dma_chan_state state; - bool slave; - bool device_fc; - struct pl08x_txd *waiting; -}; - /** * struct pl08x_platform_data - the platform configuration for the PL08x * PrimeCells. -- cgit v1.2.3-70-g09d2 From 550ec36f507177470a394c4dfffcaf986ca25818 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 28 May 2012 10:18:55 +0100 Subject: dmaengine: PL08x: constify channel names and bus_id strings Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- drivers/dma/amba-pl08x.c | 2 +- include/linux/amba/pl08x.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux/amba') diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 94949909e4e9..775efef0349c 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -237,7 +237,7 @@ struct pl08x_dma_chan { struct pl08x_phy_chan *phychan; int phychan_hold; struct tasklet_struct tasklet; - char *name; + const char *name; const struct pl08x_channel_data *cd; dma_addr_t src_addr; dma_addr_t dst_addr; diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 48d02bf66ec9..158ce2634b01 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -58,7 +58,7 @@ enum { * these buses (use PL08X_AHB1 | PL08X_AHB2). */ struct pl08x_channel_data { - char *bus_id; + const char *bus_id; int min_signal; int max_signal; u32 muxval; -- cgit v1.2.3-70-g09d2 From dc8d5f8de12146c8732d926a30e5f064d76061e0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 16 May 2012 12:20:55 +0100 Subject: dmaengine: PL08x: get rid of unnecessary checks in dma_slave_config Get rid of the unnecessary checks in dma_slave_config utilizing the DMA direction. This allows us to move the computation of cctl to the prepare function. Acked-by: Linus Walleij Tested-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-spear3xx/spear300.c | 26 -------------------- arch/arm/mach-spear3xx/spear310.c | 26 -------------------- arch/arm/mach-spear3xx/spear320.c | 26 -------------------- arch/arm/mach-spear3xx/spear3xx.c | 3 ++- arch/arm/mach-spear6xx/spear6xx.c | 51 ++------------------------------------- drivers/dma/amba-pl08x.c | 41 ++++++++++--------------------- include/linux/amba/pl08x.h | 5 ++-- 7 files changed, 20 insertions(+), 158 deletions(-) (limited to 'include/linux/amba') diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index 0f882ecb7d81..6ec300549960 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -120,182 +120,156 @@ struct pl08x_channel_data spear300_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index bbcf4571d361..1d0e435b9045 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -205,182 +205,156 @@ struct pl08x_channel_data spear310_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart3_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart4_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart5_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, }; diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index 88d483bcd66a..fd823c624575 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -213,182 +213,156 @@ struct pl08x_channel_data spear320_dma_info[] = { .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c0_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "uart2_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c1_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2c2_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "i2s_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "rs485_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index 0f41bd1c47c3..d6cd8403fe66 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -46,7 +46,8 @@ struct pl022_ssp_controller pl022_plat_data = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e3596583e..b59ae5369e7b 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -36,336 +36,288 @@ static struct pl08x_channel_data spear600_dma_info[] = { .min_signal = 0, .max_signal = 0, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp1_tx", .min_signal = 1, .max_signal = 1, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_rx", .min_signal = 2, .max_signal = 2, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart0_tx", .min_signal = 3, .max_signal = 3, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_rx", .min_signal = 4, .max_signal = 4, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "uart1_tx", .min_signal = 5, .max_signal = 5, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp2_rx", .min_signal = 6, .max_signal = 6, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp2_tx", .min_signal = 7, .max_signal = 7, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ssp0_rx", .min_signal = 8, .max_signal = 8, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ssp0_tx", .min_signal = 9, .max_signal = 9, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_rx", .min_signal = 10, .max_signal = 10, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "i2c_tx", .min_signal = 11, .max_signal = 11, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "irda", .min_signal = 12, .max_signal = 12, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "adc", .min_signal = 13, .max_signal = 13, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "to_jpeg", .min_signal = 14, .max_signal = 14, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "from_jpeg", .min_signal = 15, .max_signal = 15, .muxval = 0, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_rx", .min_signal = 0, .max_signal = 0, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras0_tx", .min_signal = 1, .max_signal = 1, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_rx", .min_signal = 2, .max_signal = 2, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras1_tx", .min_signal = 3, .max_signal = 3, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_rx", .min_signal = 4, .max_signal = 4, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras2_tx", .min_signal = 5, .max_signal = 5, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_rx", .min_signal = 6, .max_signal = 6, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras3_tx", .min_signal = 7, .max_signal = 7, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_rx", .min_signal = 8, .max_signal = 8, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras4_tx", .min_signal = 9, .max_signal = 9, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_rx", .min_signal = 10, .max_signal = 10, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras5_tx", .min_signal = 11, .max_signal = 11, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_rx", .min_signal = 12, .max_signal = 12, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras6_tx", .min_signal = 13, .max_signal = 13, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_rx", .min_signal = 14, .max_signal = 14, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ras7_tx", .min_signal = 15, .max_signal = 15, .muxval = 1, - .cctl = 0, .periph_buses = PL08X_AHB1, }, { .bus_id = "ext0_rx", .min_signal = 0, .max_signal = 0, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext0_tx", .min_signal = 1, .max_signal = 1, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_rx", .min_signal = 2, .max_signal = 2, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext1_tx", .min_signal = 3, .max_signal = 3, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_rx", .min_signal = 4, .max_signal = 4, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext2_tx", .min_signal = 5, .max_signal = 5, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_rx", .min_signal = 6, .max_signal = 6, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext3_tx", .min_signal = 7, .max_signal = 7, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_rx", .min_signal = 8, .max_signal = 8, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext4_tx", .min_signal = 9, .max_signal = 9, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_rx", .min_signal = 10, .max_signal = 10, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext5_tx", .min_signal = 11, .max_signal = 11, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_rx", .min_signal = 12, .max_signal = 12, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext6_tx", .min_signal = 13, .max_signal = 13, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_rx", .min_signal = 14, .max_signal = 14, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, { .bus_id = "ext7_tx", .min_signal = 15, .max_signal = 15, .muxval = 2, - .cctl = 0, .periph_buses = PL08X_AHB2, }, }; @@ -373,7 +325,8 @@ static struct pl08x_channel_data spear600_dma_info[] = { struct pl08x_platform_data pl080_plat_data = { .memcpy_channel = { .bus_id = "memcpy", - .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + .cctl_memcpy = + (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index 50b9a839e9c3..f7397789e4e8 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -235,8 +235,6 @@ struct pl08x_dma_chan { const char *name; const struct pl08x_channel_data *cd; struct dma_slave_config cfg; - u32 src_cctl; - u32 dst_cctl; struct list_head pend_list; struct pl08x_txd *at; spinlock_t lock; @@ -1235,30 +1233,15 @@ static int dma_set_runtime_config(struct dma_chan *chan, struct dma_slave_config *config) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); - struct pl08x_driver_data *pl08x = plchan->host; - u32 src_cctl, dst_cctl; if (!plchan->slave) return -EINVAL; - dst_cctl = pl08x_get_cctl(plchan, config->dst_addr_width, - config->dst_maxburst); - if (dst_cctl == ~0 && config->direction == DMA_MEM_TO_DEV) { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width (M2D)\n"); + /* Reject definitely invalid configurations */ + if (config->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES || + config->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES) return -EINVAL; - } - src_cctl = pl08x_get_cctl(plchan, config->src_addr_width, - config->src_maxburst); - if (src_cctl == ~0 && config->direction == DMA_DEV_TO_MEM) { - dev_err(&pl08x->adev->dev, - "bad runtime_config: alien address width (D2M)\n"); - return -EINVAL; - } - - plchan->dst_cctl = dst_cctl; - plchan->src_cctl = src_cctl; plchan->cfg = *config; return 0; @@ -1407,7 +1390,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; - txd->cctl = pl08x->pd->memcpy_channel.cctl & + txd->cctl = pl08x->pd->memcpy_channel.cctl_memcpy & ~(PL080_CONTROL_DST_AHB2 | PL080_CONTROL_SRC_AHB2); /* Both to be incremented or the code will break */ @@ -1434,10 +1417,11 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_txd *txd; struct pl08x_sg *dsg; struct scatterlist *sg; + enum dma_slave_buswidth addr_width; dma_addr_t slave_addr; int ret, tmp; u8 src_buses, dst_buses; - u32 cctl; + u32 maxburst, cctl; dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", __func__, sg_dma_len(sgl), plchan->name); @@ -1456,13 +1440,17 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->direction = direction; if (direction == DMA_MEM_TO_DEV) { - cctl = plchan->dst_cctl | PL080_CONTROL_SRC_INCR; + cctl = PL080_CONTROL_SRC_INCR; slave_addr = plchan->cfg.dst_addr; + addr_width = plchan->cfg.dst_addr_width; + maxburst = plchan->cfg.dst_maxburst; src_buses = pl08x->mem_buses; dst_buses = plchan->cd->periph_buses; } else if (direction == DMA_DEV_TO_MEM) { - cctl = plchan->src_cctl | PL080_CONTROL_DST_INCR; + cctl = PL080_CONTROL_DST_INCR; slave_addr = plchan->cfg.src_addr; + addr_width = plchan->cfg.src_addr_width; + maxburst = plchan->cfg.src_maxburst; src_buses = plchan->cd->periph_buses; dst_buses = pl08x->mem_buses; } else { @@ -1472,6 +1460,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + cctl |= pl08x_get_cctl(plchan, addr_width, maxburst); if (cctl == ~0) { pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, @@ -1774,14 +1763,10 @@ static irqreturn_t pl08x_irq(int irq, void *dev) static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) { - u32 cctl = pl08x_cctl(chan->cd->cctl); - chan->slave = true; chan->name = chan->cd->bus_id; chan->cfg.src_addr = chan->cd->addr; chan->cfg.dst_addr = chan->cd->addr; - chan->src_cctl = cctl; - chan->dst_cctl = cctl; } /* diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index 158ce2634b01..2a5f64a11b77 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,7 +47,8 @@ enum { * devices with static assignments * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel - * @cctl_opt: default options for the channel control register + * @cctl_memcpy: options for the channel control register for memcpy + * *** not used for slave channels *** * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -62,7 +63,7 @@ struct pl08x_channel_data { int min_signal; int max_signal; u32 muxval; - u32 cctl; + u32 cctl_memcpy; dma_addr_t addr; bool single; u8 periph_buses; -- cgit v1.2.3-70-g09d2