From 9a3dccc42556537a48f39ee9a9e7ab90a933f766 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 6 Jan 2006 09:56:18 +0100 Subject: [BLOCK] add FUA support to libata Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/ata.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'include/linux/ata.h') diff --git a/include/linux/ata.h b/include/linux/ata.h index d2873b732bb1..f63dad4165b1 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -129,6 +129,7 @@ enum { ATA_CMD_READ_EXT = 0x25, ATA_CMD_WRITE = 0xCA, ATA_CMD_WRITE_EXT = 0x35, + ATA_CMD_WRITE_FUA_EXT = 0x3D, ATA_CMD_PIO_READ = 0x20, ATA_CMD_PIO_READ_EXT = 0x24, ATA_CMD_PIO_WRITE = 0x30, @@ -137,6 +138,7 @@ enum { ATA_CMD_READ_MULTI_EXT = 0x29, ATA_CMD_WRITE_MULTI = 0xC5, ATA_CMD_WRITE_MULTI_EXT = 0x39, + ATA_CMD_WRITE_MULTI_FUA_EXT = 0xCE, ATA_CMD_SET_FEATURES = 0xEF, ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, @@ -192,6 +194,7 @@ enum { ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ + ATA_TFLAG_FUA = (1 << 5), /* enable FUA */ }; enum ata_tf_protocols { @@ -245,7 +248,8 @@ struct ata_taskfile { #define ata_id_is_sata(id) ((id)[93] == 0) #define ata_id_rahead_enabled(id) ((id)[85] & (1 << 6)) #define ata_id_wcache_enabled(id) ((id)[85] & (1 << 5)) -#define ata_id_has_flush(id) ((id)[83] & (1 << 12)) +#define ata_id_has_fua(id) ((id)[84] & (1 << 6)) +#define ata_id_has_flush(id) ((id)[83] & (1 << 12)) #define ata_id_has_flush_ext(id) ((id)[83] & (1 << 13)) #define ata_id_has_lba48(id) ((id)[83] & (1 << 10)) #define ata_id_has_wcache(id) ((id)[82] & (1 << 5)) -- cgit v1.2.3-70-g09d2 From 9b847548663ef1039dd49f0eb4463d001e596bc3 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Fri, 6 Jan 2006 09:28:07 +0100 Subject: [PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/scsi/ata_piix.c | 4 ++ drivers/scsi/libata-core.c | 114 +++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/libata-scsi.c | 16 +++++++ drivers/scsi/scsi_sysfs.c | 31 ++++++++++++ include/linux/ata.h | 2 + include/linux/libata.h | 8 ++++ include/scsi/scsi_host.h | 6 +++ 7 files changed, 181 insertions(+) (limited to 'include/linux/ata.h') diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 0ea27873b9ff..f79630340028 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -166,6 +166,8 @@ static struct pci_driver piix_pci_driver = { .id_table = piix_pci_tbl, .probe = piix_init_one, .remove = ata_pci_remove_one, + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, }; static struct scsi_host_template piix_sht = { @@ -186,6 +188,8 @@ static struct scsi_host_template piix_sht = { .slave_configure = ata_scsi_slave_config, .bios_param = ata_std_bios_param, .ordered_flush = 1, + .resume = ata_scsi_device_resume, + .suspend = ata_scsi_device_suspend, }; static const struct ata_port_operations piix_pata_ops = { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 9ea102587914..9c66d4059399 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4154,6 +4154,96 @@ err_out: * Inherited from caller. */ +/* + * Execute a 'simple' command, that only consists of the opcode 'cmd' itself, + * without filling any other registers + */ +static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev, + u8 cmd) +{ + struct ata_taskfile tf; + int err; + + ata_tf_init(ap, &tf, dev->devno); + + tf.command = cmd; + tf.flags |= ATA_TFLAG_DEVICE; + tf.protocol = ATA_PROT_NODATA; + + err = ata_exec_internal(ap, dev, &tf, DMA_NONE, NULL, 0); + if (err) + printk(KERN_ERR "%s: ata command failed: %d\n", + __FUNCTION__, err); + + return err; +} + +static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev) +{ + u8 cmd; + + if (!ata_try_flush_cache(dev)) + return 0; + + if (ata_id_has_flush_ext(dev->id)) + cmd = ATA_CMD_FLUSH_EXT; + else + cmd = ATA_CMD_FLUSH; + + return ata_do_simple_cmd(ap, dev, cmd); +} + +static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev) +{ + return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1); +} + +static int ata_start_drive(struct ata_port *ap, struct ata_device *dev) +{ + return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE); +} + +/** + * ata_device_resume - wakeup a previously suspended devices + * + * Kick the drive back into action, by sending it an idle immediate + * command and making sure its transfer mode matches between drive + * and host. + * + */ +int ata_device_resume(struct ata_port *ap, struct ata_device *dev) +{ + if (ap->flags & ATA_FLAG_SUSPENDED) { + ap->flags &= ~ATA_FLAG_SUSPENDED; + ata_set_mode(ap); + } + if (!ata_dev_present(dev)) + return 0; + if (dev->class == ATA_DEV_ATA) + ata_start_drive(ap, dev); + + return 0; +} + +/** + * ata_device_suspend - prepare a device for suspend + * + * Flush the cache on the drive, if appropriate, then issue a + * standbynow command. + * + */ +int ata_device_suspend(struct ata_port *ap, struct ata_device *dev) +{ + if (!ata_dev_present(dev)) + return 0; + if (dev->class == ATA_DEV_ATA) + ata_flush_cache(ap, dev); + + ata_standby_drive(ap, dev); + ap->flags |= ATA_FLAG_SUSPENDED; + return 0; +} + int ata_port_start (struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -4902,6 +4992,23 @@ int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits) return (tmp == bits->val) ? 1 : 0; } + +int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state) +{ + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + return 0; +} + +int ata_pci_device_resume(struct pci_dev *pdev) +{ + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_device(pdev); + pci_set_master(pdev); + return 0; +} #endif /* CONFIG_PCI */ @@ -5005,4 +5112,11 @@ EXPORT_SYMBOL_GPL(ata_pci_host_stop); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); +EXPORT_SYMBOL_GPL(ata_pci_device_suspend); +EXPORT_SYMBOL_GPL(ata_pci_device_resume); #endif /* CONFIG_PCI */ + +EXPORT_SYMBOL_GPL(ata_device_suspend); +EXPORT_SYMBOL_GPL(ata_device_resume); +EXPORT_SYMBOL_GPL(ata_scsi_device_suspend); +EXPORT_SYMBOL_GPL(ata_scsi_device_resume); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index e0439be4b573..c1ebede14a48 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -396,6 +396,22 @@ void ata_dump_status(unsigned id, struct ata_taskfile *tf) } } +int ata_scsi_device_resume(struct scsi_device *sdev) +{ + struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; + struct ata_device *dev = &ap->device[sdev->id]; + + return ata_device_resume(ap, dev); +} + +int ata_scsi_device_suspend(struct scsi_device *sdev) +{ + struct ata_port *ap = (struct ata_port *) &sdev->host->hostdata[0]; + struct ata_device *dev = &ap->device[sdev->id]; + + return ata_device_suspend(ap, dev); +} + /** * ata_to_sense_error - convert ATA error to SCSI error * @id: ATA device number diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 15842b1f0f4a..ea7f3a433572 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -263,9 +263,40 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv) return (sdp->inq_periph_qual == SCSI_INQ_PQ_CON)? 1: 0; } +static int scsi_bus_suspend(struct device * dev, pm_message_t state) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_host_template *sht = sdev->host->hostt; + int err; + + err = scsi_device_quiesce(sdev); + if (err) + return err; + + if (sht->suspend) + err = sht->suspend(sdev); + + return err; +} + +static int scsi_bus_resume(struct device * dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_host_template *sht = sdev->host->hostt; + int err = 0; + + if (sht->resume) + err = sht->resume(sdev); + + scsi_device_resume(sdev); + return err; +} + struct bus_type scsi_bus_type = { .name = "scsi", .match = scsi_bus_match, + .suspend = scsi_bus_suspend, + .resume = scsi_bus_resume, }; int scsi_sysfs_register(void) diff --git a/include/linux/ata.h b/include/linux/ata.h index d2873b732bb1..3eb80c391b39 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -141,6 +141,8 @@ enum { ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, + ATA_CMD_STANDBYNOW1 = 0xE0, + ATA_CMD_IDLEIMMEDIATE = 0xE1, ATA_CMD_INIT_DEV_PARAMS = 0x91, /* SETFEATURES stuff */ diff --git a/include/linux/libata.h b/include/linux/libata.h index e828e172ccbf..cdab75c209a0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -124,6 +124,8 @@ enum { ATA_FLAG_DEBUGMSG = (1 << 10), ATA_FLAG_NO_ATAPI = (1 << 11), /* No ATAPI support */ + ATA_FLAG_SUSPENDED = (1 << 12), /* port is suspended */ + ATA_QCFLAG_ACTIVE = (1 << 1), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_SG = (1 << 3), /* have s/g table? */ ATA_QCFLAG_SINGLE = (1 << 4), /* no s/g, just a single buffer */ @@ -436,6 +438,8 @@ extern void ata_std_ports(struct ata_ioports *ioaddr); extern int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports); extern void ata_pci_remove_one (struct pci_dev *pdev); +extern int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t state); +extern int ata_pci_device_resume(struct pci_dev *pdev); #endif /* CONFIG_PCI */ extern int ata_device_add(const struct ata_probe_ent *ent); extern void ata_host_set_remove(struct ata_host_set *host_set); @@ -445,6 +449,10 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn extern int ata_scsi_error(struct Scsi_Host *host); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int ata_scsi_device_resume(struct scsi_device *); +extern int ata_scsi_device_suspend(struct scsi_device *); +extern int ata_device_resume(struct ata_port *, struct ata_device *); +extern int ata_device_suspend(struct ata_port *, struct ata_device *); extern int ata_ratelimit(void); /* diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h index 6cbb1982ed03..6297885a35e7 100644 --- a/include/scsi/scsi_host.h +++ b/include/scsi/scsi_host.h @@ -295,6 +295,12 @@ struct scsi_host_template { */ int (*proc_info)(struct Scsi_Host *, char *, char **, off_t, int, int); + /* + * suspend support + */ + int (*resume)(struct scsi_device *); + int (*suspend)(struct scsi_device *); + /* * Name of proc directory */ -- cgit v1.2.3-70-g09d2