From fd5d10059d5ead12dd12f05ae6d96e70d1fac3df Mon Sep 17 00:00:00 2001 From: Felix Riemann Date: Thu, 20 Jun 2019 08:45:00 +0100 Subject: regulator: da9061/62: Adjust LDO voltage selection minimum value According to the DA9061 and DA9062 datasheets the LDO voltage selection registers have a lower value of 0x02. This applies to voltage registers VLDO1_A, VLDO2_A, VLDO3_A and VLDO4_A. This linear offset of 0x02 was previously not observed by the driver, causing the LDO output voltage to be systematically lower by two steps (= 0.1V). This patch fixes the minimum linear selector offset by setting it to a value of 2 and increases the n_voltages by the same amount allowing voltages in the range 0x02 -> 0.9V to 0x38 -> 3.6V to be correctly selected. Also fixes an incorrect calculaton for the n_voltages value in the regulator LDO2. These fixes effect all LDO regulators for DA9061 and DA9062. Acked-by: Steve Twiss Tested-by: Steve Twiss Signed-off-by: Felix Riemann Signed-off-by: Steve Twiss Signed-off-by: Mark Brown --- include/linux/mfd/da9062/registers.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux/mfd') diff --git a/include/linux/mfd/da9062/registers.h b/include/linux/mfd/da9062/registers.h index fe04b708742b..2906bf6160fb 100644 --- a/include/linux/mfd/da9062/registers.h +++ b/include/linux/mfd/da9062/registers.h @@ -797,6 +797,9 @@ #define DA9062AA_BUCK3_SL_A_SHIFT 7 #define DA9062AA_BUCK3_SL_A_MASK BIT(7) +/* DA9062AA_VLDO[1-4]_A common */ +#define DA9062AA_VLDO_A_MIN_SEL 2 + /* DA9062AA_VLDO1_A = 0x0A9 */ #define DA9062AA_VLDO1_A_SHIFT 0 #define DA9062AA_VLDO1_A_MASK 0x3f -- cgit v1.3.1