From ea9b6dcc152f09c207117ab121d4fa03d2db282a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 28 Jun 2006 21:48:38 -0700 Subject: MTD: kernel-doc fixes + additions Fix some kernel-doc typos/spellos. Use kernel-doc syntax in places where it was almost used. Correct/add struct, struct field, and function param names where needed. Signed-off-by: Randy Dunlap Signed-off-by: David Woodhouse --- include/linux/mtd/bbm.h | 35 +++++++++++---------- include/linux/mtd/mtd.h | 4 +-- include/linux/mtd/nand.h | 3 -- include/linux/mtd/onenand.h | 77 ++++++++++++++++++++++++++------------------- 4 files changed, 65 insertions(+), 54 deletions(-) (limited to 'include/linux/mtd') diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 7a7fbe87fef0..1221b7c44158 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -19,21 +19,21 @@ /** * struct nand_bbt_descr - bad block table descriptor - * @param options options for this descriptor - * @param pages the page(s) where we find the bbt, used with + * @options: options for this descriptor + * @pages: the page(s) where we find the bbt, used with * option BBT_ABSPAGE when bbt is searched, * then we store the found bbts pages here. * Its an array and supports up to 8 chips now - * @param offs offset of the pattern in the oob area of the page - * @param veroffs offset of the bbt version counter in the oob are of the page - * @param version version read from the bbt page during scan - * @param len length of the pattern, if 0 no pattern check is performed - * @param maxblocks maximum number of blocks to search for a bbt. This number of - * blocks is reserved at the end of the device + * @offs: offset of the pattern in the oob area of the page + * @veroffs: offset of the bbt version counter in the oob area of the page + * @version: version read from the bbt page during scan + * @len: length of the pattern, if 0 no pattern check is performed + * @maxblocks: maximum number of blocks to search for a bbt. This + * number of blocks is reserved at the end of the device * where the tables are written. - * @param reserved_block_code if non-0, this pattern denotes a reserved + * @reserved_block_code: if non-0, this pattern denotes a reserved * (rather than bad) block in the stored bbt - * @param pattern pattern to identify bad block table or factory marked + * @pattern: pattern to identify bad block table or factory marked * good / bad blocks, can be NULL, if len = 0 * * Descriptor for the bad block table marker and the descriptor for the @@ -93,12 +93,15 @@ struct nand_bbt_descr { #define ONENAND_BADBLOCK_POS 0 /** - * struct bbt_info - [GENERIC] Bad Block Table data structure - * @param bbt_erase_shift [INTERN] number of address bits in a bbt entry - * @param badblockpos [INTERN] position of the bad block marker in the oob area - * @param bbt [INTERN] bad block table pointer - * @param badblock_pattern [REPLACEABLE] bad block scan pattern used for initial bad block scan - * @param priv [OPTIONAL] pointer to private bbm date + * struct bbm_info - [GENERIC] Bad Block Table data structure + * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry + * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @options: options for this descriptor + * @bbt: [INTERN] bad block table pointer + * @isbad_bbt: function to determine if a block is bad + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for + * initial bad block scan + * @priv: [OPTIONAL] pointer to private bbm date */ struct bbm_info { int bbt_erase_shift; diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 9b7a2b525d63..94a443d45258 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -77,11 +77,11 @@ typedef enum { * * @len: number of bytes to write/read. When a data buffer is given * (datbuf != NULL) this is the number of data bytes. When - + no data buffer is available this is the number of oob bytes. + * no data buffer is available this is the number of oob bytes. * * @retlen: number of bytes written/read. When a data buffer is given * (datbuf != NULL) this is the number of data bytes. When - + no data buffer is available this is the number of oob bytes. + * no data buffer is available this is the number of oob bytes. * * @ooblen: number of oob bytes per page * @ooboffs: offset of oob data in the oob area (only relevant when diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 2266f032a8c6..0b4cd2fa64aa 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -407,7 +407,6 @@ struct nand_chip { /** * struct nand_flash_dev - NAND Flash Device ID Structure - * * @name: Identify the device type * @id: device ID code * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 @@ -526,7 +525,6 @@ extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, /** * struct platform_nand_chip - chip level device structure - * * @nr_chips: max. number of chips to scan for * @chip_offset: chip number offset * @nr_partitions: number of partitions pointed to by partitions (or zero) @@ -549,7 +547,6 @@ struct platform_nand_chip { /** * struct platform_nand_ctrl - controller level device structure - * * @hwcontrol: platform specific hardware control structure * @dev_ready: platform specific function to read ready/busy pin * @select_chip: platform specific chip select function diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 9ce9a48db444..1f4972155249 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -23,7 +23,7 @@ extern int onenand_scan(struct mtd_info *mtd, int max_chips); /* Free resources held by the OneNAND device */ extern void onenand_release(struct mtd_info *mtd); -/** +/* * onenand_state_t - chip states * Enumeration for OneNAND flash chip state */ @@ -42,9 +42,9 @@ typedef enum { /** * struct onenand_bufferram - OneNAND BufferRAM Data - * @param block block address in BufferRAM - * @param page page address in BufferRAM - * @param valid valid flag + * @block: block address in BufferRAM + * @page: page address in BufferRAM + * @valid: valid flag */ struct onenand_bufferram { int block; @@ -54,32 +54,43 @@ struct onenand_bufferram { /** * struct onenand_chip - OneNAND Private Flash Chip Data - * @param base [BOARDSPECIFIC] address to access OneNAND - * @param chipsize [INTERN] the size of one chip for multichip arrays - * @param device_id [INTERN] device ID - * @param verstion_id [INTERN] version ID - * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about - * @param erase_shift [INTERN] number of address bits in a block - * @param page_shift [INTERN] number of address bits in a page - * @param ppb_shift [INTERN] number of address bits in a pages per block - * @param page_mask [INTERN] a page per block mask - * @param bufferam_index [INTERN] BufferRAM index - * @param bufferam [INTERN] BufferRAM info - * @param readw [REPLACEABLE] hardware specific function for read short - * @param writew [REPLACEABLE] hardware specific function for write short - * @param command [REPLACEABLE] hardware specific function for writing commands to the chip - * @param wait [REPLACEABLE] hardware specific function for wait on ready - * @param read_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area - * @param write_bufferram [REPLACEABLE] hardware specific function for BufferRAM Area - * @param read_word [REPLACEABLE] hardware specific function for read register of OneNAND - * @param write_word [REPLACEABLE] hardware specific function for write register of OneNAND - * @param scan_bbt [REPLACEALBE] hardware specific function for scaning Bad block Table - * @param chip_lock [INTERN] spinlock used to protect access to this structure and the chip - * @param wq [INTERN] wait queue to sleep on if a OneNAND operation is in progress - * @param state [INTERN] the current state of the OneNAND device - * @param ecclayout [REPLACEABLE] the default ecc placement scheme - * @param bbm [REPLACEABLE] pointer to Bad Block Management - * @param priv [OPTIONAL] pointer to private chip date + * @base: [BOARDSPECIFIC] address to access OneNAND + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @device_id: [INTERN] device ID + * @density_mask: chip density, used for DDP devices + * @verstion_id: [INTERN] version ID + * @options: [BOARDSPECIFIC] various chip options. They can + * partly be set to inform onenand_scan about + * @erase_shift: [INTERN] number of address bits in a block + * @page_shift: [INTERN] number of address bits in a page + * @ppb_shift: [INTERN] number of address bits in a pages per block + * @page_mask: [INTERN] a page per block mask + * @bufferram_index: [INTERN] BufferRAM index + * @bufferram: [INTERN] BufferRAM info + * @readw: [REPLACEABLE] hardware specific function for read short + * @writew: [REPLACEABLE] hardware specific function for write short + * @command: [REPLACEABLE] hardware specific function for writing + * commands to the chip + * @wait: [REPLACEABLE] hardware specific function for wait on ready + * @read_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area + * @write_bufferram: [REPLACEABLE] hardware specific function for BufferRAM Area + * @read_word: [REPLACEABLE] hardware specific function for read + * register of OneNAND + * @write_word: [REPLACEABLE] hardware specific function for write + * register of OneNAND + * @mmcontrol: sync burst read function + * @block_markbad: function to mark a block as bad + * @scan_bbt: [REPLACEALBE] hardware specific function for scanning + * Bad block Table + * @chip_lock: [INTERN] spinlock used to protect access to this + * structure and the chip + * @wq: [INTERN] wait queue to sleep on if a OneNAND + * operation is in progress + * @state: [INTERN] the current state of the OneNAND device + * @page_buf: data buffer + * @ecclayout: [REPLACEABLE] the default ecc placement scheme + * @bbm: [REPLACEABLE] pointer to Bad Block Management + * @priv: [OPTIONAL] pointer to private chip date */ struct onenand_chip { void __iomem *base; @@ -147,9 +158,9 @@ struct onenand_chip { #define ONENAND_MFR_SAMSUNG 0xec /** - * struct nand_manufacturers - NAND Flash Manufacturer ID Structure - * @param name: Manufacturer name - * @param id: manufacturer ID code of device. + * struct onenand_manufacturers - NAND Flash Manufacturer ID Structure + * @name: Manufacturer name + * @id: manufacturer ID code of device. */ struct onenand_manufacturers { int id; -- cgit v1.2.3-70-g09d2