From b91e6107119f62be8b51b9955294be52c0b4fc80 Mon Sep 17 00:00:00 2001 From: Emanuele Ghidoli Date: Mon, 13 Mar 2023 17:50:39 +0100 Subject: usb: misc: usb3503: support usb3803 and bypass mode Add support for USB3803 and bypass mode, with this change is also possible to move the component out of bypass mode. In bypass mode the downstream port 3 is connected to the upstream port with low switch resistance R_on. Controlling mode of operations: | RESET_N | BYPASS_N | Mode | -------------------------------- | 0 | 0 | standby | | 1 | 0 | bypass | | 1 | 1 | hub | Datasheet: https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/00001691D.pdf Signed-off-by: Emanuele Ghidoli Signed-off-by: Francesco Dolcini Link: https://lore.kernel.org/r/20230313165039.255579-4-francesco@dolcini.it Signed-off-by: Greg Kroah-Hartman --- include/linux/platform_data/usb3503.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/platform_data/usb3503.h b/include/linux/platform_data/usb3503.h index d01ef97ddf36..f3c942f396f8 100644 --- a/include/linux/platform_data/usb3503.h +++ b/include/linux/platform_data/usb3503.h @@ -12,6 +12,7 @@ enum usb3503_mode { USB3503_MODE_UNKNOWN, USB3503_MODE_HUB, USB3503_MODE_STANDBY, + USB3503_MODE_BYPASS, }; struct usb3503_platform_data { -- cgit v1.3.1 From 130eac4170859fb368681e00d390f20f44bbf27b Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 28 Mar 2023 15:10:43 +0200 Subject: xhci: use pm_ptr() instead of #ifdef for CONFIG_PM conditionals A recent patch caused an unused-function warning in builds with CONFIG_PM disabled, after the function became marked 'static': drivers/usb/host/xhci-pci.c:91:13: error: 'xhci_msix_sync_irqs' defined but not used [-Werror=unused-function] 91 | static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) | ^~~~~~~~~~~~~~~~~~~ This could be solved by adding another #ifdef, but as there is a trend towards removing CONFIG_PM checks in favor of helper macros, do the same conversion here and use pm_ptr() to get either a function pointer or NULL but avoid the warning. As the hidden functions reference some other symbols, make sure those are visible at compile time, at the minimal cost of a few extra bytes for 'struct usb_device'. Fixes: 9abe15d55dcc ("xhci: Move xhci MSI sync function to to xhci-pci") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230328131114.1296430-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-pci.c | 16 +++++----------- include/linux/usb.h | 3 +-- include/linux/usb/hcd.h | 2 -- 3 files changed, 6 insertions(+), 15 deletions(-) (limited to 'include/linux') diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index a53ecc8ff8c5..bbbb01282038 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -728,7 +728,6 @@ static void xhci_pci_remove(struct pci_dev *dev) usb_hcd_pci_remove(dev); } -#ifdef CONFIG_PM /* * In some Intel xHCI controllers, in order to get D3 working, * through a vendor specific SSIC CONFIG register at offset 0x883c, @@ -927,7 +926,6 @@ static void xhci_pci_shutdown(struct usb_hcd *hcd) if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) pci_set_power_state(pdev, PCI_D3hot); } -#endif /* CONFIG_PM */ /*-------------------------------------------------------------------------*/ @@ -970,9 +968,7 @@ static struct pci_driver xhci_pci_driver = { .shutdown = usb_hcd_pci_shutdown, .driver = { -#ifdef CONFIG_PM - .pm = &usb_hcd_pci_pm_ops, -#endif + .pm = pm_ptr(&usb_hcd_pci_pm_ops), .probe_type = PROBE_PREFER_ASYNCHRONOUS, }, }; @@ -980,12 +976,10 @@ static struct pci_driver xhci_pci_driver = { static int __init xhci_pci_init(void) { xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides); -#ifdef CONFIG_PM - xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend; - xhci_pci_hc_driver.pci_resume = xhci_pci_resume; - xhci_pci_hc_driver.pci_poweroff_late = xhci_pci_poweroff_late; - xhci_pci_hc_driver.shutdown = xhci_pci_shutdown; -#endif + xhci_pci_hc_driver.pci_suspend = pm_ptr(xhci_pci_suspend); + xhci_pci_hc_driver.pci_resume = pm_ptr(xhci_pci_resume); + xhci_pci_hc_driver.pci_poweroff_late = pm_ptr(xhci_pci_poweroff_late); + xhci_pci_hc_driver.shutdown = pm_ptr(xhci_pci_shutdown); xhci_pci_hc_driver.stop = xhci_pci_stop; return pci_register_driver(&xhci_pci_driver); } diff --git a/include/linux/usb.h b/include/linux/usb.h index 9642ee02d713..d510fabcafa2 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -704,13 +704,12 @@ struct usb_device { unsigned long active_duration; -#ifdef CONFIG_PM unsigned long connect_time; unsigned do_remote_wakeup:1; unsigned reset_resume:1; unsigned port_is_suspended:1; -#endif + struct wusb_dev *wusb_dev; int slot_id; struct usb2_lpm_parameters l1_params; diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index b51c07111729..094c77eaf455 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -488,9 +488,7 @@ extern void usb_hcd_pci_shutdown(struct pci_dev *dev); extern int usb_hcd_amd_remote_wakeup_quirk(struct pci_dev *dev); -#ifdef CONFIG_PM extern const struct dev_pm_ops usb_hcd_pci_pm_ops; -#endif #endif /* CONFIG_USB_PCI */ /* pci-ish (pdev null is ok) buffer alloc/mapping support */ -- cgit v1.3.1 From b93c2a68f3d9dc98ec30dcb342ae47c1c8d09d18 Mon Sep 17 00:00:00 2001 From: Elson Roy Serrao Date: Fri, 24 Mar 2023 14:47:57 -0700 Subject: usb: gadget: Properly configure the device for remote wakeup The wakeup bit in the bmAttributes field indicates whether the device is configured for remote wakeup. But this field should be allowed to set only if the UDC supports such wakeup mechanism. So configure this field based on UDC capability. Also inform the UDC whether the device is configured for remote wakeup by implementing a gadget op. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-2-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 18 ++++++++++++++++++ drivers/usb/gadget/configfs.c | 3 +++ drivers/usb/gadget/udc/core.c | 27 +++++++++++++++++++++++++++ drivers/usb/gadget/udc/trace.h | 5 +++++ include/linux/usb/composite.h | 2 ++ include/linux/usb/gadget.h | 8 ++++++++ 6 files changed, 63 insertions(+) (limited to 'include/linux') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f1ecd12b62c3..00c89571de2a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -513,6 +513,19 @@ static u8 encode_bMaxPower(enum usb_device_speed speed, return min(val, 900U) / 8; } +void check_remote_wakeup_config(struct usb_gadget *g, + struct usb_configuration *c) +{ + if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes) { + /* Reset the rw bit if gadget is not capable of it */ + if (!g->wakeup_capable && g->ops->set_remote_wakeup) { + WARN(c->cdev, "Clearing wakeup bit for config c.%d\n", + c->bConfigurationValue); + c->bmAttributes &= ~USB_CONFIG_ATT_WAKEUP; + } + } +} + static int config_buf(struct usb_configuration *config, enum usb_device_speed speed, void *buf, u8 type) { @@ -994,6 +1007,11 @@ static int set_config(struct usb_composite_dev *cdev, power = min(power, 500U); else power = min(power, 900U); + + if (USB_CONFIG_ATT_WAKEUP & c->bmAttributes) + usb_gadget_set_remote_wakeup(gadget, 1); + else + usb_gadget_set_remote_wakeup(gadget, 0); done: if (power <= USB_SELF_POWER_VBUS_MAX_DRAW) usb_gadget_set_selfpowered(gadget); diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index b9f1136aa0a2..4c639e9ddedc 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1761,6 +1761,9 @@ static int configfs_composite_bind(struct usb_gadget *gadget, if (gadget_is_otg(gadget)) c->descriptors = otg_desc; + /* Properly configure the bmAttributes wakeup bit */ + check_remote_wakeup_config(gadget, c); + cfg = container_of(c, struct config_usb_cfg, c); if (!list_empty(&cfg->string_list)) { i = 0; diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 23b0629a8774..3dcbba739db6 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -513,6 +513,33 @@ out: } EXPORT_SYMBOL_GPL(usb_gadget_wakeup); +/** + * usb_gadget_set_remote_wakeup - configures the device remote wakeup feature. + * @gadget:the device being configured for remote wakeup + * @set:value to be configured. + * + * set to one to enable remote wakeup feature and zero to disable it. + * + * returns zero on success, else negative errno. + */ +int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set) +{ + int ret = 0; + + if (!gadget->ops->set_remote_wakeup) { + ret = -EOPNOTSUPP; + goto out; + } + + ret = gadget->ops->set_remote_wakeup(gadget, set); + +out: + trace_usb_gadget_set_remote_wakeup(gadget, ret); + + return ret; +} +EXPORT_SYMBOL_GPL(usb_gadget_set_remote_wakeup); + /** * usb_gadget_set_selfpowered - sets the device selfpowered feature. * @gadget:the device being declared as self-powered diff --git a/drivers/usb/gadget/udc/trace.h b/drivers/usb/gadget/udc/trace.h index abdbcb1bacb0..a5ed26fbc2da 100644 --- a/drivers/usb/gadget/udc/trace.h +++ b/drivers/usb/gadget/udc/trace.h @@ -91,6 +91,11 @@ DEFINE_EVENT(udc_log_gadget, usb_gadget_wakeup, TP_ARGS(g, ret) ); +DEFINE_EVENT(udc_log_gadget, usb_gadget_set_remote_wakeup, + TP_PROTO(struct usb_gadget *g, int ret), + TP_ARGS(g, ret) +); + DEFINE_EVENT(udc_log_gadget, usb_gadget_set_selfpowered, TP_PROTO(struct usb_gadget *g, int ret), TP_ARGS(g, ret) diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 608dc962748b..d949e91ceb48 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -413,6 +413,8 @@ extern int composite_dev_prepare(struct usb_composite_driver *composite, extern int composite_os_desc_req_prepare(struct usb_composite_dev *cdev, struct usb_ep *ep0); void composite_dev_cleanup(struct usb_composite_dev *cdev); +void check_remote_wakeup_config(struct usb_gadget *g, + struct usb_configuration *c); static inline struct usb_composite_driver *to_cdriver( struct usb_gadget_driver *gdrv) diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 00750f7020f3..1d796128030b 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -310,6 +310,7 @@ struct usb_udc; struct usb_gadget_ops { int (*get_frame)(struct usb_gadget *); int (*wakeup)(struct usb_gadget *); + int (*set_remote_wakeup)(struct usb_gadget *, int set); int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); int (*vbus_session) (struct usb_gadget *, int is_active); int (*vbus_draw) (struct usb_gadget *, unsigned mA); @@ -384,6 +385,8 @@ struct usb_gadget_ops { * @connected: True if gadget is connected. * @lpm_capable: If the gadget max_speed is FULL or HIGH, this flag * indicates that it supports LPM as per the LPM ECN & errata. + * @wakeup_capable: True if gadget is capable of sending remote wakeup. + * @wakeup_armed: True if gadget is armed by the host for remote wakeup. * @irq: the interrupt number for device controller. * @id_number: a unique ID number for ensuring that gadget names are distinct * @@ -445,6 +448,8 @@ struct usb_gadget { unsigned deactivated:1; unsigned connected:1; unsigned lpm_capable:1; + unsigned wakeup_capable:1; + unsigned wakeup_armed:1; int irq; int id_number; }; @@ -601,6 +606,7 @@ static inline int gadget_is_otg(struct usb_gadget *g) #if IS_ENABLED(CONFIG_USB_GADGET) int usb_gadget_frame_number(struct usb_gadget *gadget); int usb_gadget_wakeup(struct usb_gadget *gadget); +int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set); int usb_gadget_set_selfpowered(struct usb_gadget *gadget); int usb_gadget_clear_selfpowered(struct usb_gadget *gadget); int usb_gadget_vbus_connect(struct usb_gadget *gadget); @@ -616,6 +622,8 @@ static inline int usb_gadget_frame_number(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_wakeup(struct usb_gadget *gadget) { return 0; } +static inline int usb_gadget_set_remote_wakeup(struct usb_gadget *gadget, int set) +{ return 0; } static inline int usb_gadget_set_selfpowered(struct usb_gadget *gadget) { return 0; } static inline int usb_gadget_clear_selfpowered(struct usb_gadget *gadget) -- cgit v1.3.1 From f0db885fb05d35befa81896db6b19eb3ee9ccdfe Mon Sep 17 00:00:00 2001 From: Elson Roy Serrao Date: Fri, 24 Mar 2023 14:47:59 -0700 Subject: usb: gadget: Add function wakeup support USB3.2 spec section 9.2.5.4 quotes that a function may signal that it wants to exit from Function Suspend by sending a Function Wake Notification to the host if it is enabled for function remote wakeup. Add an api in composite layer that can be used by the function drivers to support this feature. Also expose a gadget op so that composite layer can trigger a wakeup request to the UDC driver. Reviewed-by: Thinh Nguyen Signed-off-by: Elson Roy Serrao Link: https://lore.kernel.org/r/1679694482-16430-4-git-send-email-quic_eserrao@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 40 ++++++++++++++++++++++++++++++++++++++++ include/linux/usb/composite.h | 6 ++++++ include/linux/usb/gadget.h | 1 + 3 files changed, 47 insertions(+) (limited to 'include/linux') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 00c89571de2a..d3fd2d1d8096 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -492,6 +492,46 @@ int usb_interface_id(struct usb_configuration *config, } EXPORT_SYMBOL_GPL(usb_interface_id); +/** + * usb_func_wakeup - sends function wake notification to the host. + * @func: function that sends the remote wakeup notification. + * + * Applicable to devices operating at enhanced superspeed when usb + * functions are put in function suspend state and armed for function + * remote wakeup. On completion, function wake notification is sent. If + * the device is in low power state it tries to bring the device to active + * state before sending the wake notification. Since it is a synchronous + * call, caller must take care of not calling it in interrupt context. + * For devices operating at lower speeds returns negative errno. + * + * Returns zero on success, else negative errno. + */ +int usb_func_wakeup(struct usb_function *func) +{ + struct usb_gadget *gadget = func->config->cdev->gadget; + int id; + + if (!gadget->ops->func_wakeup) + return -EOPNOTSUPP; + + if (!func->func_wakeup_armed) { + ERROR(func->config->cdev, "not armed for func remote wakeup\n"); + return -EINVAL; + } + + for (id = 0; id < MAX_CONFIG_INTERFACES; id++) + if (func->config->interface[id] == func) + break; + + if (id == MAX_CONFIG_INTERFACES) { + ERROR(func->config->cdev, "Invalid function\n"); + return -EINVAL; + } + + return gadget->ops->func_wakeup(gadget, id); +} +EXPORT_SYMBOL_GPL(usb_func_wakeup); + static u8 encode_bMaxPower(enum usb_device_speed speed, struct usb_configuration *c) { diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index d949e91ceb48..a2448e98854f 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -150,6 +150,9 @@ struct usb_os_desc_table { * GetStatus() request when the recipient is Interface. * @func_suspend: callback to be called when * SetFeature(FUNCTION_SUSPEND) is reseived + * @func_suspended: Indicates whether the function is in function suspend state. + * @func_wakeup_armed: Indicates whether the function is armed by the host for + * wakeup signaling. * * A single USB function uses one or more interfaces, and should in most * cases support operation at both full and high speeds. Each function is @@ -220,6 +223,8 @@ struct usb_function { int (*get_status)(struct usb_function *); int (*func_suspend)(struct usb_function *, u8 suspend_opt); + bool func_suspended; + bool func_wakeup_armed; /* private: */ /* internals */ struct list_head list; @@ -241,6 +246,7 @@ int config_ep_by_speed_and_alt(struct usb_gadget *g, struct usb_function *f, int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f, struct usb_ep *_ep); +int usb_func_wakeup(struct usb_function *func); #define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */ diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 1d796128030b..75bda0783395 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -310,6 +310,7 @@ struct usb_udc; struct usb_gadget_ops { int (*get_frame)(struct usb_gadget *); int (*wakeup)(struct usb_gadget *); + int (*func_wakeup)(struct usb_gadget *gadget, int intf_id); int (*set_remote_wakeup)(struct usb_gadget *, int set); int (*set_selfpowered) (struct usb_gadget *, int is_selfpowered); int (*vbus_session) (struct usb_gadget *, int is_active); -- cgit v1.3.1 From 13890626501ffda22b18213ddaf7930473da5792 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 10 Apr 2023 15:37:07 -0400 Subject: USB: core: Add routines for endpoint checks in old drivers Many of the older USB drivers in the Linux USB stack were written based simply on a vendor's device specification. They use the endpoint information in the spec and assume these endpoints will always be present, with the properties listed, in any device matching the given vendor and product IDs. While that may have been true back then, with spoofing and fuzzing it is not true any more. More and more we are finding that those old drivers need to perform at least a minimum of checking before they try to use any endpoint other than ep0. To make this checking as simple as possible, we now add a couple of utility routines to the USB core. usb_check_bulk_endpoints() and usb_check_int_endpoints() take an interface pointer together with a list of endpoint addresses (numbers and directions). They check that the interface's current alternate setting includes endpoints with those addresses and that each of these endpoints has the right type: bulk or interrupt, respectively. Although we already have usb_find_common_endpoints() and related routines meant for a similar purpose, they are not well suited for this kind of checking. Those routines find endpoints of various kinds, but only one (either the first or the last) of each kind, and they don't verify that the endpoints' addresses agree with what the caller expects. In theory the new routines could be more general: They could take a particular altsetting as their argument instead of always using the interface's current altsetting. In practice I think this won't matter too much; multiple altsettings tend to be used for transferring media (audio or visual) over isochronous endpoints, not bulk or interrupt. Drivers for such devices will generally require more sophisticated checking than these simplistic routines provide. Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/dd2c8e8c-2c87-44ea-ba17-c64b97e201c9@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/usb.c | 76 ++++++++++++++++++++++++++++++++++++++++++++++++++ include/linux/usb.h | 5 ++++ 2 files changed, 81 insertions(+) (limited to 'include/linux') diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index 34742fbbd84d..901ec732321c 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -206,6 +206,82 @@ int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, } EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); +/** + * usb_find_endpoint() - Given an endpoint address, search for the endpoint's + * usb_host_endpoint structure in an interface's current altsetting. + * @intf: the interface whose current altsetting should be searched + * @ep_addr: the endpoint address (number and direction) to find + * + * Search the altsetting's list of endpoints for one with the specified address. + * + * Return: Pointer to the usb_host_endpoint if found, %NULL otherwise. + */ +static const struct usb_host_endpoint *usb_find_endpoint( + const struct usb_interface *intf, unsigned int ep_addr) +{ + int n; + const struct usb_host_endpoint *ep; + + n = intf->cur_altsetting->desc.bNumEndpoints; + ep = intf->cur_altsetting->endpoint; + for (; n > 0; (--n, ++ep)) { + if (ep->desc.bEndpointAddress == ep_addr) + return ep; + } + return NULL; +} + +/** + * usb_check_bulk_endpoints - Check whether an interface's current altsetting + * contains a set of bulk endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are bulk, %false otherwise. + */ +bool usb_check_bulk_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_bulk(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_bulk_endpoints); + +/** + * usb_check_int_endpoints - Check whether an interface's current altsetting + * contains a set of interrupt endpoints with the given addresses. + * @intf: the interface whose current altsetting should be searched + * @ep_addrs: 0-terminated array of the endpoint addresses (number and + * direction) to look for + * + * Search for endpoints with the specified addresses and check their types. + * + * Return: %true if all the endpoints are found and are interrupt, + * %false otherwise. + */ +bool usb_check_int_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs) +{ + const struct usb_host_endpoint *ep; + + for (; *ep_addrs; ++ep_addrs) { + ep = usb_find_endpoint(intf, *ep_addrs); + if (!ep || !usb_endpoint_xfer_int(&ep->desc)) + return false; + } + return true; +} +EXPORT_SYMBOL_GPL(usb_check_int_endpoints); + /** * usb_find_alt_setting() - Given a configuration, find the alternate setting * for the given interface. diff --git a/include/linux/usb.h b/include/linux/usb.h index d510fabcafa2..4ae0466c846c 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -291,6 +291,11 @@ void usb_put_intf(struct usb_interface *intf); #define USB_MAXINTERFACES 32 #define USB_MAXIADS (USB_MAXINTERFACES/2) +bool usb_check_bulk_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs); +bool usb_check_int_endpoints( + const struct usb_interface *intf, const u8 *ep_addrs); + /* * USB Resume Timer: Every Host controller driver should drive the resume * signalling on the bus for the amount of time defined by this macro. -- cgit v1.3.1