From 7d0314b11cdd92bca8b89684c06953bf114605fc Mon Sep 17 00:00:00 2001 From: Ron Diskin Date: Sun, 5 Apr 2020 13:58:40 +0300 Subject: net/mlx5e: Modify uplink state on interface up/down When setting the PF interface up/down, notify the firmware to update uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled. This behavior will prevent sending traffic out on uplink port when PF is down, such as sending traffic from a VF interface which is still up. Currently when calling mlx5e_open/close(), the driver only sends PAOS command to notify the firmware to set the physical port state to up/down, however, it is not sufficient. When VF is in "auto" state, it follows the uplink state, which was not updated on mlx5e_open/close() before this patch. When switchdev mode is enabled and uplink representor is first enabled, set the uplink port state value back to its FW default "AUTO". Fixes: 63bfd399de55 ("net/mlx5e: Send PAOS command on interface up/down") Signed-off-by: Ron Diskin Reviewed-by: Roi Dayan Reviewed-by: Moshe Shemesh Signed-off-by: Saeed Mahameed --- include/linux/mlx5/mlx5_ifc.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h index 073b79eacc99..1340e02b14ef 100644 --- a/include/linux/mlx5/mlx5_ifc.h +++ b/include/linux/mlx5/mlx5_ifc.h @@ -4381,6 +4381,7 @@ struct mlx5_ifc_query_vport_state_out_bits { enum { MLX5_VPORT_STATE_OP_MOD_VNIC_VPORT = 0x0, MLX5_VPORT_STATE_OP_MOD_ESW_VPORT = 0x1, + MLX5_VPORT_STATE_OP_MOD_UPLINK = 0x2, }; struct mlx5_ifc_arm_monitor_counter_in_bits { -- cgit v1.3.1