From 448cd2e248732326632957e52ea9c44729affcb2 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 11 Feb 2014 12:30:18 +0200 Subject: mac80211: reset probe_send_count also in HW_CONNECTION_MONITOR case In case of beacon_loss with IEEE80211_HW_CONNECTION_MONITOR device, mac80211 probes the ap (and disconnects on timeout) but ignores the ack. If we already got an ack, there's no reason to continue disconnecting. this can help devices that supports IEEE80211_HW_CONNECTION_MONITOR only partially (e.g. take care of keep alives, but does not probe the ap. In case the device wants to disconnect without probing, it can just call ieee80211_connection_loss. Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg --- include/net/mac80211.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4f0f29dce0aa..4005c5b4e3b4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1507,8 +1507,6 @@ struct ieee80211_tx_control { * @IEEE80211_HW_CONNECTION_MONITOR: * The hardware performs its own connection monitoring, including * periodic keep-alives to the AP and probing the AP on beacon loss. - * When this flag is set, signaling beacon-loss will cause an immediate - * change to disassociated state. * * @IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC: * This device needs to get data from beacon before association (i.e. -- cgit v1.2.3-70-g09d2 From 06d181a8fd58031db9c114d920b40d8820380a6e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 4 Feb 2014 20:51:09 +0100 Subject: mac80211: add NAPI support back NAPI was originally added to mac80211 a long time ago (by John in commit 4e6cbfd09c66 in July 2010), but then removed years later (by Stanislaw in commit 30c97120c6c7 in February 2013). No driver ever used it, so that was fine. Now I'm adding support for NAPI to our driver, so add some code to mac80211 again to support NAPI. John was originally wrapping some (but not nearly all NAPI-related functions), but that doesn't scale very well with the number of functions that are there, some of which are even only inlines. Thus, instead of doing that, let the drivers manage the NAPI struct, except for napi_add() which is needed so mac80211 knows how to call napi_gro_receive(). Also remove some no longer needed definitions that were left when NAPI support was removed. Reviewed-by: Emmanuel Grumbach Reviewed-by: Eyal Shapira Signed-off-by: Johannes Berg --- include/net/mac80211.h | 34 +++++++++++++--------------------- net/mac80211/ieee80211_i.h | 2 ++ net/mac80211/main.c | 12 ++++++++++++ net/mac80211/rx.c | 5 ++++- 4 files changed, 31 insertions(+), 22 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 4005c5b4e3b4..2d4d31212eed 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1642,10 +1642,6 @@ enum ieee80211_hw_flags { * the hw can report back. * @max_rate_tries: maximum number of tries for each stage * - * @napi_weight: weight used for NAPI polling. You must specify an - * appropriate value here if a napi_poll operation is provided - * by your driver. - * * @max_rx_aggregation_subframes: maximum buffer size (number of * sub-frames) to be used for A-MPDU block ack receiver * aggregation. @@ -1699,7 +1695,6 @@ struct ieee80211_hw { int vif_data_size; int sta_data_size; int chanctx_data_size; - int napi_weight; u16 queues; u16 max_listen_interval; s8 max_signal; @@ -2622,8 +2617,6 @@ enum ieee80211_roc_type { * callback. They must then call ieee80211_chswitch_done() to indicate * completion of the channel switch. * - * @napi_poll: Poll Rx queue for incoming data frames. - * * @set_antenna: Set antenna configuration (tx_ant, rx_ant) on the device. * Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may * reject TX/RX mask combinations they cannot support by returning -EINVAL @@ -2882,7 +2875,6 @@ struct ieee80211_ops { void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop); void (*channel_switch)(struct ieee80211_hw *hw, struct ieee80211_channel_switch *ch_switch); - int (*napi_poll)(struct ieee80211_hw *hw, int budget); int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); @@ -3164,21 +3156,21 @@ void ieee80211_free_hw(struct ieee80211_hw *hw); */ void ieee80211_restart_hw(struct ieee80211_hw *hw); -/** ieee80211_napi_schedule - schedule NAPI poll - * - * Use this function to schedule NAPI polling on a device. - * - * @hw: the hardware to start polling - */ -void ieee80211_napi_schedule(struct ieee80211_hw *hw); - -/** ieee80211_napi_complete - complete NAPI polling - * - * Use this function to finish NAPI polling on a device. +/** + * ieee80211_napi_add - initialize mac80211 NAPI context + * @hw: the hardware to initialize the NAPI context on + * @napi: the NAPI context to initialize + * @napi_dev: dummy NAPI netdevice, here to not waste the space if the + * driver doesn't use NAPI + * @poll: poll function + * @weight: default weight * - * @hw: the hardware to stop polling + * See also netif_napi_add(). */ -void ieee80211_napi_complete(struct ieee80211_hw *hw); +void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi, + struct net_device *napi_dev, + int (*poll)(struct napi_struct *, int), + int weight); /** * ieee80211_rx - receive frame diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0014b5396ce5..8603dfb52b3a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1242,6 +1242,8 @@ struct ieee80211_local { struct ieee80211_sub_if_data __rcu *p2p_sdata; + struct napi_struct *napi; + /* virtual monitor interface */ struct ieee80211_sub_if_data __rcu *monitor_sdata; struct cfg80211_chan_def monitor_chandef; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 1f7d8422d62d..b055f6a55c68 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1076,6 +1076,18 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) } EXPORT_SYMBOL(ieee80211_register_hw); +void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi, + struct net_device *napi_dev, + int (*poll)(struct napi_struct *, int), + int weight) +{ + struct ieee80211_local *local = hw_to_local(hw); + + netif_napi_add(napi_dev, napi, poll, weight); + local->napi = napi; +} +EXPORT_SYMBOL_GPL(ieee80211_napi_add); + void ieee80211_unregister_hw(struct ieee80211_hw *hw) { struct ieee80211_local *local = hw_to_local(hw); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 593062109c50..58e4b7052d17 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1954,7 +1954,10 @@ ieee80211_deliver_skb(struct ieee80211_rx_data *rx) /* deliver to local stack */ skb->protocol = eth_type_trans(skb, dev); memset(skb->cb, 0, sizeof(skb->cb)); - netif_receive_skb(skb); + if (rx->local->napi) + napi_gro_receive(rx->local->napi, skb); + else + netif_receive_skb(skb); } if (xmit_skb) { -- cgit v1.2.3-70-g09d2 From d85dad75566674ca8012715ac00a84ced3697972 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 13 Feb 2014 13:27:42 +0100 Subject: mac80211: remove erroneous comment about RX radiotap header There's no way the driver can pre-build the radiotap header, so remove the comment stating that it can. Reported-by: Jouni Malinen Signed-off-by: Johannes Berg --- include/net/mac80211.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2d4d31212eed..a6bcc39e146e 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -66,10 +66,6 @@ * * Secondly, when the hardware handles fragmentation, the frame handed to * the driver from mac80211 is the MSDU, not the MPDU. - * - * Finally, for received frames, the driver is able to indicate that it has - * filled a radiotap header and put that in front of the frame; if it does - * not do so then mac80211 may add this under certain circumstances. */ /** -- cgit v1.2.3-70-g09d2 From 37e3308cb2b6933019d9d9c2045877d6d68d9c5a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 Feb 2014 10:48:17 +0100 Subject: mac80211: allow driver to return error from sched_scan_stop In order to solve races with sched_scan_stop, it is necessary for the driver to be able to return an error to propagate that to cfg80211 so it doesn't send an event. Reviewed-by: Alexander Bondar Signed-off-by: Johannes Berg --- drivers/net/wireless/iwlwifi/mvm/mac80211.c | 6 ++++-- drivers/net/wireless/ti/wlcore/main.c | 6 ++++-- include/net/mac80211.h | 3 ++- net/mac80211/driver-ops.h | 12 ++++++++---- net/mac80211/scan.c | 2 +- 5 files changed, 19 insertions(+), 10 deletions(-) (limited to 'include/net/mac80211.h') diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index beaf8140abbf..7492fc0f2766 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -1746,14 +1746,16 @@ out: return ret; } -static void iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) +static int iwl_mvm_mac_sched_scan_stop(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) { struct iwl_mvm *mvm = IWL_MAC80211_GET_MVM(hw); mutex_lock(&mvm->mutex); iwl_mvm_sched_scan_stop(mvm); mutex_unlock(&mvm->mutex); + + return 0; } static int iwl_mvm_mac_set_key(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 7aae5b3a0c2c..4175a57ac9f5 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -3668,8 +3668,8 @@ out: return ret; } -static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, - struct ieee80211_vif *vif) +static int wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, + struct ieee80211_vif *vif) { struct wl1271 *wl = hw->priv; struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif); @@ -3691,6 +3691,8 @@ static void wl1271_op_sched_scan_stop(struct ieee80211_hw *hw, wl1271_ps_elp_sleep(wl); out: mutex_unlock(&wl->mutex); + + return 0; } static int wl1271_op_set_frag_threshold(struct ieee80211_hw *hw, u32 value) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a6bcc39e146e..86faa413b37d 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2460,6 +2460,7 @@ enum ieee80211_roc_type { * This process will continue until sched_scan_stop is called. * * @sched_scan_stop: Tell the hardware to stop an ongoing scheduled scan. + * In this case, ieee80211_sched_scan_stopped() must not be called. * * @sw_scan_start: Notifier function that is called just before a software scan * is started. Can be NULL, if the driver doesn't need this notification. @@ -2807,7 +2808,7 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct cfg80211_sched_scan_request *req, struct ieee80211_sched_scan_ies *ies); - void (*sched_scan_stop)(struct ieee80211_hw *hw, + int (*sched_scan_stop)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); void (*sw_scan_start)(struct ieee80211_hw *hw); void (*sw_scan_complete)(struct ieee80211_hw *hw); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index ef8b385eff04..fc689f5d971e 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -354,16 +354,20 @@ drv_sched_scan_start(struct ieee80211_local *local, return ret; } -static inline void drv_sched_scan_stop(struct ieee80211_local *local, - struct ieee80211_sub_if_data *sdata) +static inline int drv_sched_scan_stop(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) { + int ret; + might_sleep(); check_sdata_in_driver(sdata); trace_drv_sched_scan_stop(local, sdata); - local->ops->sched_scan_stop(&local->hw, &sdata->vif); - trace_drv_return_void(local); + ret = local->ops->sched_scan_stop(&local->hw, &sdata->vif); + trace_drv_return_int(local, ret); + + return ret; } static inline void drv_sw_scan_start(struct ieee80211_local *local) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index b211e412511f..836f500dfbf3 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -1056,7 +1056,7 @@ int ieee80211_request_sched_scan_stop(struct ieee80211_sub_if_data *sdata) local->sched_scan_req = NULL; if (rcu_access_pointer(local->sched_scan_sdata)) - drv_sched_scan_stop(local, sdata); + ret = drv_sched_scan_stop(local, sdata); out: mutex_unlock(&local->mtx); -- cgit v1.2.3-70-g09d2