From a7869e5f9174f246b662b2db6390bc128a351388 Mon Sep 17 00:00:00 2001 From: Ying Xue Date: Sat, 4 Jan 2020 10:48:36 +0800 Subject: tipc: eliminate KMSAN: uninit-value in __tipc_nl_compat_dumpit error syzbot found the following crash on: ===================================================== BUG: KMSAN: uninit-value in __nlmsg_parse include/net/netlink.h:661 [inline] BUG: KMSAN: uninit-value in nlmsg_parse_deprecated include/net/netlink.h:706 [inline] BUG: KMSAN: uninit-value in __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 CPU: 0 PID: 12425 Comm: syz-executor062 Not tainted 5.5.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0x128/0x220 mm/kmsan/kmsan_report.c:108 __msan_warning+0x57/0xa0 mm/kmsan/kmsan_instr.c:245 __nlmsg_parse include/net/netlink.h:661 [inline] nlmsg_parse_deprecated include/net/netlink.h:706 [inline] __tipc_nl_compat_dumpit+0x553/0x11e0 net/tipc/netlink_compat.c:215 tipc_nl_compat_dumpit+0x761/0x910 net/tipc/netlink_compat.c:308 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x444179 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b d8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffd2d6409c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00000000004002e0 RCX: 0000000000444179 RDX: 0000000000000000 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00000000006ce018 R08: 0000000000000000 R09: 00000000004002e0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000401e20 R13: 0000000000401eb0 R14: 0000000000000000 R15: 0000000000000000 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:149 [inline] kmsan_internal_poison_shadow+0x5c/0x110 mm/kmsan/kmsan.c:132 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:86 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xe47/0x11f0 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x309/0xa50 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] nlmsg_new include/net/netlink.h:888 [inline] tipc_nl_compat_dumpit+0x6e4/0x910 net/tipc/netlink_compat.c:301 tipc_nl_compat_handle net/tipc/netlink_compat.c:1252 [inline] tipc_nl_compat_recv+0x12e9/0x2870 net/tipc/netlink_compat.c:1311 genl_family_rcv_msg_doit net/netlink/genetlink.c:672 [inline] genl_family_rcv_msg net/netlink/genetlink.c:717 [inline] genl_rcv_msg+0x1dd0/0x23a0 net/netlink/genetlink.c:734 netlink_rcv_skb+0x431/0x620 net/netlink/af_netlink.c:2477 genl_rcv+0x63/0x80 net/netlink/genetlink.c:745 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xfa0/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x11f0/0x1480 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x1362/0x13f0 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x4f0/0x5e0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb6/0x160 arch/x86/entry/common.c:295 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ===================================================== The complaint above occurred because the memory region pointed by attrbuf variable was not initialized. To eliminate this warning, we use kcalloc() rather than kmalloc_array() to allocate memory for attrbuf. Reported-by: syzbot+b1fd2bf2c89d8407e15f@syzkaller.appspotmail.com Signed-off-by: Ying Xue Signed-off-by: David S. Miller --- net/tipc/netlink_compat.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/tipc') diff --git a/net/tipc/netlink_compat.c b/net/tipc/netlink_compat.c index 0254bb7e418b..217516357ef2 100644 --- a/net/tipc/netlink_compat.c +++ b/net/tipc/netlink_compat.c @@ -204,8 +204,8 @@ static int __tipc_nl_compat_dumpit(struct tipc_nl_compat_cmd_dump *cmd, return -ENOMEM; } - attrbuf = kmalloc_array(tipc_genl_family.maxattr + 1, - sizeof(struct nlattr *), GFP_KERNEL); + attrbuf = kcalloc(tipc_genl_family.maxattr + 1, + sizeof(struct nlattr *), GFP_KERNEL); if (!attrbuf) { err = -ENOMEM; goto err_out; -- cgit v1.2.3-70-g09d2 From ea04b445a266cddd5d5c653690d9676df020302f Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 6 Jan 2020 16:35:26 +0900 Subject: tipc: do not add socket.o to tipc-y twice net/tipc/Makefile adds socket.o twice. tipc-y += addr.o bcast.o bearer.o \ core.o link.o discover.o msg.o \ name_distr.o subscr.o monitor.o name_table.o net.o \ netlink.o netlink_compat.o node.o socket.o eth_media.o \ ^^^^^^^^ topsrv.o socket.o group.o trace.o ^^^^^^^^ Signed-off-by: Masahiro Yamada Signed-off-by: David S. Miller --- net/tipc/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net/tipc') diff --git a/net/tipc/Makefile b/net/tipc/Makefile index 11255e970dd4..1603f5b49e73 100644 --- a/net/tipc/Makefile +++ b/net/tipc/Makefile @@ -9,7 +9,7 @@ tipc-y += addr.o bcast.o bearer.o \ core.o link.o discover.o msg.o \ name_distr.o subscr.o monitor.o name_table.o net.o \ netlink.o netlink_compat.o node.o socket.o eth_media.o \ - topsrv.o socket.o group.o trace.o + topsrv.o group.o trace.o CFLAGS_trace.o += -I$(src) -- cgit v1.2.3-70-g09d2 From b969fee12b6330fd6a0b15337a314d5b5ee56916 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Mon, 6 Jan 2020 16:35:27 +0900 Subject: tipc: remove meaningless assignment in Makefile There is no module named tipc_diag. The assignment to tipc_diag-y has no effect. Signed-off-by: Masahiro Yamada Signed-off-by: David S. Miller --- net/tipc/Makefile | 2 -- 1 file changed, 2 deletions(-) (limited to 'net/tipc') diff --git a/net/tipc/Makefile b/net/tipc/Makefile index 1603f5b49e73..ee49a9f1dd4f 100644 --- a/net/tipc/Makefile +++ b/net/tipc/Makefile @@ -20,5 +20,3 @@ tipc-$(CONFIG_TIPC_CRYPTO) += crypto.o obj-$(CONFIG_TIPC_DIAG) += diag.o - -tipc_diag-y := diag.o -- cgit v1.2.3-70-g09d2 From 49afb806cb650dd1f06f191994f3aa657d264009 Mon Sep 17 00:00:00 2001 From: Tuong Lien Date: Wed, 8 Jan 2020 09:18:15 +0700 Subject: tipc: fix link overflow issue at socket shutdown When a socket is suddenly shutdown or released, it will reject all the unreceived messages in its receive queue. This applies to a connected socket too, whereas there is only one 'FIN' message required to be sent back to its peer in this case. In case there are many messages in the queue and/or some connections with such messages are shutdown at the same time, the link layer will easily get overflowed at the 'TIPC_SYSTEM_IMPORTANCE' backlog level because of the message rejections. As a result, the link will be taken down. Moreover, immediately when the link is re-established, the socket layer can continue to reject the messages and the same issue happens... The commit refactors the '__tipc_shutdown()' function to only send one 'FIN' in the situation mentioned above. For the connectionless case, it is unavoidable but usually there is no rejections for such socket messages because they are 'dest-droppable' by default. In addition, the new code makes the other socket states clear (e.g.'TIPC_LISTEN') and treats as a separate case to avoid misbehaving. Acked-by: Ying Xue Acked-by: Jon Maloy Signed-off-by: Tuong Lien Signed-off-by: David S. Miller --- net/tipc/socket.c | 53 ++++++++++++++++++++++++++++++++--------------------- 1 file changed, 32 insertions(+), 21 deletions(-) (limited to 'net/tipc') diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 6552f986774c..6ebd809ef207 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -287,12 +287,12 @@ static void tipc_sk_respond(struct sock *sk, struct sk_buff *skb, int err) * * Caller must hold socket lock */ -static void tsk_rej_rx_queue(struct sock *sk) +static void tsk_rej_rx_queue(struct sock *sk, int error) { struct sk_buff *skb; while ((skb = __skb_dequeue(&sk->sk_receive_queue))) - tipc_sk_respond(sk, skb, TIPC_ERR_NO_PORT); + tipc_sk_respond(sk, skb, error); } static bool tipc_sk_connected(struct sock *sk) @@ -545,34 +545,45 @@ static void __tipc_shutdown(struct socket *sock, int error) /* Remove pending SYN */ __skb_queue_purge(&sk->sk_write_queue); - /* Reject all unreceived messages, except on an active connection - * (which disconnects locally & sends a 'FIN+' to peer). - */ - while ((skb = __skb_dequeue(&sk->sk_receive_queue)) != NULL) { - if (TIPC_SKB_CB(skb)->bytes_read) { - kfree_skb(skb); - continue; - } - if (!tipc_sk_type_connectionless(sk) && - sk->sk_state != TIPC_DISCONNECTING) { - tipc_set_sk_state(sk, TIPC_DISCONNECTING); - tipc_node_remove_conn(net, dnode, tsk->portid); - } - tipc_sk_respond(sk, skb, error); + /* Remove partially received buffer if any */ + skb = skb_peek(&sk->sk_receive_queue); + if (skb && TIPC_SKB_CB(skb)->bytes_read) { + __skb_unlink(skb, &sk->sk_receive_queue); + kfree_skb(skb); } - if (tipc_sk_type_connectionless(sk)) + /* Reject all unreceived messages if connectionless */ + if (tipc_sk_type_connectionless(sk)) { + tsk_rej_rx_queue(sk, error); return; + } - if (sk->sk_state != TIPC_DISCONNECTING) { + switch (sk->sk_state) { + case TIPC_CONNECTING: + case TIPC_ESTABLISHED: + tipc_set_sk_state(sk, TIPC_DISCONNECTING); + tipc_node_remove_conn(net, dnode, tsk->portid); + /* Send a FIN+/- to its peer */ + skb = __skb_dequeue(&sk->sk_receive_queue); + if (skb) { + __skb_queue_purge(&sk->sk_receive_queue); + tipc_sk_respond(sk, skb, error); + break; + } skb = tipc_msg_create(TIPC_CRITICAL_IMPORTANCE, TIPC_CONN_MSG, SHORT_H_SIZE, 0, dnode, tsk_own_node(tsk), tsk_peer_port(tsk), tsk->portid, error); if (skb) tipc_node_xmit_skb(net, skb, dnode, tsk->portid); - tipc_node_remove_conn(net, dnode, tsk->portid); - tipc_set_sk_state(sk, TIPC_DISCONNECTING); + break; + case TIPC_LISTEN: + /* Reject all SYN messages */ + tsk_rej_rx_queue(sk, error); + break; + default: + __skb_queue_purge(&sk->sk_receive_queue); + break; } } @@ -2643,7 +2654,7 @@ static int tipc_accept(struct socket *sock, struct socket *new_sock, int flags, * Reject any stray messages received by new socket * before the socket lock was taken (very, very unlikely) */ - tsk_rej_rx_queue(new_sk); + tsk_rej_rx_queue(new_sk, TIPC_ERR_NO_PORT); /* Connect new socket to it's peer */ tipc_sk_finish_conn(new_tsock, msg_origport(msg), msg_orignode(msg)); -- cgit v1.2.3-70-g09d2 From 9546a0b7ce0077d827470f603f2522b845ce5954 Mon Sep 17 00:00:00 2001 From: Tuong Lien Date: Wed, 8 Jan 2020 09:19:00 +0700 Subject: tipc: fix wrong connect() return code The current 'tipc_wait_for_connect()' function does a wait-loop for the condition 'sk->sk_state != TIPC_CONNECTING' to conclude if the socket connecting has done. However, when the condition is met, it returns '0' even in the case the connecting is actually failed, the socket state is set to 'TIPC_DISCONNECTING' (e.g. when the server socket has closed..). This results in a wrong return code for the 'connect()' call from user, making it believe that the connection is established and go ahead with building, sending a message, etc. but finally failed e.g. '-EPIPE'. This commit fixes the issue by changing the wait condition to the 'tipc_sk_connected(sk)', so the function will return '0' only when the connection is really established. Otherwise, either the socket 'sk_err' if any or '-ETIMEDOUT'/'-EINTR' will be returned correspondingly. Acked-by: Ying Xue Acked-by: Jon Maloy Signed-off-by: Tuong Lien Signed-off-by: David S. Miller --- net/tipc/socket.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net/tipc') diff --git a/net/tipc/socket.c b/net/tipc/socket.c index 6ebd809ef207..f9b4fb92c0b1 100644 --- a/net/tipc/socket.c +++ b/net/tipc/socket.c @@ -2443,8 +2443,8 @@ static int tipc_wait_for_connect(struct socket *sock, long *timeo_p) return sock_intr_errno(*timeo_p); add_wait_queue(sk_sleep(sk), &wait); - done = sk_wait_event(sk, timeo_p, - sk->sk_state != TIPC_CONNECTING, &wait); + done = sk_wait_event(sk, timeo_p, tipc_sk_connected(sk), + &wait); remove_wait_queue(sk_sleep(sk), &wait); } while (!done); return 0; -- cgit v1.2.3-70-g09d2