From 2d0f2a648147d6bbf0655e03500586a6712a7281 Mon Sep 17 00:00:00 2001 From: Maxim Levitsky Date: Fri, 4 Oct 2024 18:01:53 -0400 Subject: KVM: selftests: memslot_perf_test: increase guest sync timeout When memslot_perf_test is run nested, first iteration of test_memslot_rw_loop testcase, sometimes takes more than 2 seconds due to build of shadow page tables. Following iterations are fast. To be on the safe side, bump the timeout to 10 seconds. Signed-off-by: Maxim Levitsky Tested-by: Liam Merwick Reviewed-by: Liam Merwick Link: https://lore.kernel.org/r/20241004220153.287459-1-mlevitsk@redhat.com Signed-off-by: Sean Christopherson --- tools/testing/selftests/kvm/memslot_perf_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/kvm/memslot_perf_test.c b/tools/testing/selftests/kvm/memslot_perf_test.c index 989ffe0d047f..e3711beff7f3 100644 --- a/tools/testing/selftests/kvm/memslot_perf_test.c +++ b/tools/testing/selftests/kvm/memslot_perf_test.c @@ -417,7 +417,7 @@ static bool _guest_should_exit(void) */ static noinline void host_perform_sync(struct sync_area *sync) { - alarm(2); + alarm(10); atomic_store_explicit(&sync->sync_flag, true, memory_order_release); while (atomic_load_explicit(&sync->sync_flag, memory_order_acquire)) -- cgit v1.3.1 From 945bdae20be5a13f1fcdcb14ec356dcbeee35839 Mon Sep 17 00:00:00 2001 From: Patrick Roy Date: Thu, 24 Oct 2024 10:59:53 +0100 Subject: KVM: selftests: fix unintentional noop test in guest_memfd_test.c The loop in test_create_guest_memfd_invalid() that is supposed to test that nothing is accepted as a valid flag to KVM_CREATE_GUEST_MEMFD was initializing `flag` as 0 instead of BIT(0). This caused the loop to immediately exit instead of iterating over BIT(0), BIT(1), ... . Fixes: 8a89efd43423 ("KVM: selftests: Add basic selftest for guest_memfd()") Signed-off-by: Patrick Roy Reviewed-by: James Gowans Reviewed-by: Muhammad Usama Anjum Link: https://lore.kernel.org/r/20241024095956.3668818-1-roypat@amazon.co.uk Signed-off-by: Sean Christopherson --- tools/testing/selftests/kvm/guest_memfd_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/kvm/guest_memfd_test.c b/tools/testing/selftests/kvm/guest_memfd_test.c index ba0c8e996035..ce687f8d248f 100644 --- a/tools/testing/selftests/kvm/guest_memfd_test.c +++ b/tools/testing/selftests/kvm/guest_memfd_test.c @@ -134,7 +134,7 @@ static void test_create_guest_memfd_invalid(struct kvm_vm *vm) size); } - for (flag = 0; flag; flag <<= 1) { + for (flag = BIT(0); flag; flag <<= 1) { fd = __vm_create_guest_memfd(vm, page_size, flag); TEST_ASSERT(fd == -1 && errno == EINVAL, "guest_memfd() with flag '0x%lx' should fail with EINVAL", -- cgit v1.3.1 From 5b188cc4866aaf712e896f92ac42c7802135e507 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Wed, 9 Oct 2024 08:49:41 -0700 Subject: KVM: selftests: Disable strict aliasing Disable strict aliasing, as has been done in the kernel proper for decades (literally since before git history) to fix issues where gcc will optimize away loads in code that looks 100% correct, but is _technically_ undefined behavior, and thus can be thrown away by the compiler. E.g. arm64's vPMU counter access test casts a uint64_t (unsigned long) pointer to a u64 (unsigned long long) pointer when setting PMCR.N via u64p_replace_bits(), which gcc-13 detects and optimizes away, i.e. ignores the result and uses the original PMCR. The issue is most easily observed by making set_pmcr_n() noinline and wrapping the call with printf(), e.g. sans comments, for this code: printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n); set_pmcr_n(&pmcr, pmcr_n); printf("orig = %lx, next = %lx, want = %lu\n", pmcr_orig, pmcr, pmcr_n); gcc-13 generates: 0000000000401c90 : 401c90: f9400002 ldr x2, [x0] 401c94: b3751022 bfi x2, x1, #11, #5 401c98: f9000002 str x2, [x0] 401c9c: d65f03c0 ret 0000000000402660 : 402724: aa1403e3 mov x3, x20 402728: aa1503e2 mov x2, x21 40272c: aa1603e0 mov x0, x22 402730: aa1503e1 mov x1, x21 402734: 940060ff bl 41ab30 <_IO_printf> 402738: aa1403e1 mov x1, x20 40273c: 910183e0 add x0, sp, #0x60 402740: 97fffd54 bl 401c90 402744: aa1403e3 mov x3, x20 402748: aa1503e2 mov x2, x21 40274c: aa1503e1 mov x1, x21 402750: aa1603e0 mov x0, x22 402754: 940060f7 bl 41ab30 <_IO_printf> with the value stored in [sp + 0x60] ignored by both printf() above and in the test proper, resulting in a false failure due to vcpu_set_reg() simply storing the original value, not the intended value. $ ./vpmu_counter_access Random seed: 0x6b8b4567 orig = 3040, next = 3040, want = 0 orig = 3040, next = 3040, want = 0 ==== Test Assertion Failure ==== aarch64/vpmu_counter_access.c:505: pmcr_n == get_pmcr_n(pmcr) pid=71578 tid=71578 errno=9 - Bad file descriptor 1 0x400673: run_access_test at vpmu_counter_access.c:522 2 (inlined by) main at vpmu_counter_access.c:643 3 0x4132d7: __libc_start_call_main at libc-start.o:0 4 0x413653: __libc_start_main at ??:0 5 0x40106f: _start at ??:0 Failed to update PMCR.N to 0 (received: 6) Somewhat bizarrely, gcc-11 also exhibits the same behavior, but only if set_pmcr_n() is marked noinline, whereas gcc-13 fails even if set_pmcr_n() is inlined in its sole caller. Cc: stable@vger.kernel.org Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=116912 Signed-off-by: Sean Christopherson --- tools/testing/selftests/kvm/Makefile | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 156fbfae940f..1896ef383cae 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -241,10 +241,10 @@ CFLAGS += -Wall -Wstrict-prototypes -Wuninitialized -O2 -g -std=gnu99 \ -Wno-gnu-variable-sized-type-not-at-end -MD -MP -DCONFIG_64BIT \ -fno-builtin-memcmp -fno-builtin-memcpy \ -fno-builtin-memset -fno-builtin-strnlen \ - -fno-stack-protector -fno-PIE -I$(LINUX_TOOL_INCLUDE) \ - -I$(LINUX_TOOL_ARCH_INCLUDE) -I$(LINUX_HDR_PATH) -Iinclude \ - -I$( Date: Wed, 30 Oct 2024 21:53:33 -0700 Subject: KVM: selftests: Don't force -march=x86-64-v2 if it's unsupported Force -march=x86-64-v2 to avoid SSE/AVX instructions if and only if the uarch definition is supported by the compiler, e.g. gcc 7.5 only supports x86-64. Fixes: 9a400068a158 ("KVM: selftests: x86: Avoid using SSE/AVX instructions") Cc: Vitaly Kuznetsov Reviewed-and-tested-by: Vitaly Kuznetsov Link: https://lore.kernel.org/r/20241031045333.1209195-1-seanjc@google.com Signed-off-by: Sean Christopherson --- tools/testing/selftests/kvm/Makefile | 2 ++ 1 file changed, 2 insertions(+) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile index 1896ef383cae..48645a2e29da 100644 --- a/tools/testing/selftests/kvm/Makefile +++ b/tools/testing/selftests/kvm/Makefile @@ -249,8 +249,10 @@ ifeq ($(ARCH),s390) CFLAGS += -march=z10 endif ifeq ($(ARCH),x86) +ifeq ($(shell echo "void foo(void) { }" | $(CC) -march=x86-64-v2 -x c - -c -o /dev/null 2>/dev/null; echo "$$?"),0) CFLAGS += -march=x86-64-v2 endif +endif ifeq ($(ARCH),arm64) tools_dir := $(top_srcdir)/tools arm64_tools_dir := $(tools_dir)/arch/arm64/tools/ -- cgit v1.3.1 From 6801cf7890f2ed8fcc14859b47501f8ee7a58ec7 Mon Sep 17 00:00:00 2001 From: Hou Tao Date: Tue, 5 Nov 2024 12:30:57 +0800 Subject: selftests/bpf: Use -4095 as the bad address for bits iterator As reported by Byeonguk, the bad_words test in verifier_bits_iter.c occasionally fails on s390 host. Quoting Ilya's explanation: s390 kernel runs in a completely separate address space, there is no user/kernel split at TASK_SIZE. The same address may be valid in both the kernel and the user address spaces, there is no way to tell by looking at it. The config option related to this property is ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. Also, unfortunately, 0 is a valid address in the s390 kernel address space. Fix the issue by using -4095 as the bad address for bits iterator, as suggested by Ilya. Verify that bpf_iter_bits_new() returns -EINVAL for NULL address and -EFAULT for bad address. Fixes: ebafc1e535db ("selftests/bpf: Add three test cases for bits_iter") Reported-by: Byeonguk Jeong Closes: https://lore.kernel.org/bpf/ZycSXwjH4UTvx-Cn@ub22/ Signed-off-by: Hou Tao Acked-by: Ilya Leoshkevich Link: https://lore.kernel.org/r/20241105043057.3371482-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov --- .../selftests/bpf/progs/verifier_bits_iter.c | 32 +++++++++++++++++++--- 1 file changed, 28 insertions(+), 4 deletions(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/bpf/progs/verifier_bits_iter.c b/tools/testing/selftests/bpf/progs/verifier_bits_iter.c index 156cc278e2fc..7c881bca9af5 100644 --- a/tools/testing/selftests/bpf/progs/verifier_bits_iter.c +++ b/tools/testing/selftests/bpf/progs/verifier_bits_iter.c @@ -57,9 +57,15 @@ __description("null pointer") __success __retval(0) int null_pointer(void) { - int nr = 0; + struct bpf_iter_bits iter; + int err, nr = 0; int *bit; + err = bpf_iter_bits_new(&iter, NULL, 1); + bpf_iter_bits_destroy(&iter); + if (err != -EINVAL) + return 1; + bpf_for_each(bits, bit, NULL, 1) nr++; return nr; @@ -194,15 +200,33 @@ __description("bad words") __success __retval(0) int bad_words(void) { - void *bad_addr = (void *)(3UL << 30); - int nr = 0; + void *bad_addr = (void *)-4095; + struct bpf_iter_bits iter; + volatile int nr; int *bit; + int err; + + err = bpf_iter_bits_new(&iter, bad_addr, 1); + bpf_iter_bits_destroy(&iter); + if (err != -EFAULT) + return 1; + nr = 0; bpf_for_each(bits, bit, bad_addr, 1) nr++; + if (nr != 0) + return 2; + err = bpf_iter_bits_new(&iter, bad_addr, 4); + bpf_iter_bits_destroy(&iter); + if (err != -EFAULT) + return 3; + + nr = 0; bpf_for_each(bits, bit, bad_addr, 4) nr++; + if (nr != 0) + return 4; - return nr; + return 0; } -- cgit v1.3.1 From 55d42a0c3f9ccd07c199e0ddbe1ba87572d30074 Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Tue, 5 Nov 2024 17:52:35 -0800 Subject: selftests: net: add a test for closing a netlink socket ith dump in progress Close a socket with dump in progress. We need a dump which generates enough info not to fit into a single skb. Policy dump fits the bill. Use the trick discovered by syzbot for keeping a ref on the socket longer than just close, with mqueue. TAP version 13 1..3 # Starting 3 tests from 1 test cases. # RUN global.test_sanity ... # OK global.test_sanity ok 1 global.test_sanity # RUN global.close_in_progress ... # OK global.close_in_progress ok 2 global.close_in_progress # RUN global.close_with_ref ... # OK global.close_with_ref ok 3 global.close_with_ref # PASSED: 3 / 3 tests passed. # Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0 Note that this test is not expected to fail but rather crash the kernel if we get the cleanup wrong. Reviewed-by: Kuniyuki Iwashima Link: https://patch.msgid.link/20241106015235.2458807-2-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/netlink-dumps.c | 110 ++++++++++++++++++++++++++++ 2 files changed, 111 insertions(+) create mode 100644 tools/testing/selftests/net/netlink-dumps.c (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index 649f1fe0dc46..5e86f7a51b43 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -78,6 +78,7 @@ TEST_PROGS += test_vxlan_vnifiltering.sh TEST_GEN_FILES += io_uring_zerocopy_tx TEST_PROGS += io_uring_zerocopy_tx.sh TEST_GEN_FILES += bind_bhash +TEST_GEN_PROGS += netlink-dumps TEST_GEN_PROGS += sk_bind_sendto_listen TEST_GEN_PROGS += sk_connect_zero_addr TEST_GEN_PROGS += sk_so_peek_off diff --git a/tools/testing/selftests/net/netlink-dumps.c b/tools/testing/selftests/net/netlink-dumps.c new file mode 100644 index 000000000000..7ee6dcd334df --- /dev/null +++ b/tools/testing/selftests/net/netlink-dumps.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 + +#define _GNU_SOURCE + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#include "../kselftest_harness.h" + +static const struct { + struct nlmsghdr nlhdr; + struct genlmsghdr genlhdr; + struct nlattr ahdr; + __u16 val; + __u16 pad; +} dump_policies = { + .nlhdr = { + .nlmsg_len = sizeof(dump_policies), + .nlmsg_type = GENL_ID_CTRL, + .nlmsg_flags = NLM_F_REQUEST | NLM_F_ACK | NLM_F_DUMP, + .nlmsg_seq = 1, + }, + .genlhdr = { + .cmd = CTRL_CMD_GETPOLICY, + .version = 2, + }, + .ahdr = { + .nla_len = 6, + .nla_type = CTRL_ATTR_FAMILY_ID, + }, + .val = GENL_ID_CTRL, + .pad = 0, +}; + +// Sanity check for the test itself, make sure the dump doesn't fit in one msg +TEST(test_sanity) +{ + int netlink_sock; + char buf[8192]; + ssize_t n; + + netlink_sock = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + ASSERT_GE(netlink_sock, 0); + + n = send(netlink_sock, &dump_policies, sizeof(dump_policies), 0); + ASSERT_EQ(n, sizeof(dump_policies)); + + n = recv(netlink_sock, buf, sizeof(buf), MSG_DONTWAIT); + ASSERT_GE(n, sizeof(struct nlmsghdr)); + + n = recv(netlink_sock, buf, sizeof(buf), MSG_DONTWAIT); + ASSERT_GE(n, sizeof(struct nlmsghdr)); + + close(netlink_sock); +} + +TEST(close_in_progress) +{ + int netlink_sock; + ssize_t n; + + netlink_sock = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + ASSERT_GE(netlink_sock, 0); + + n = send(netlink_sock, &dump_policies, sizeof(dump_policies), 0); + ASSERT_EQ(n, sizeof(dump_policies)); + + close(netlink_sock); +} + +TEST(close_with_ref) +{ + char cookie[NOTIFY_COOKIE_LEN] = {}; + int netlink_sock, mq_fd; + struct sigevent sigev; + ssize_t n; + + netlink_sock = socket(AF_NETLINK, SOCK_RAW, NETLINK_GENERIC); + ASSERT_GE(netlink_sock, 0); + + n = send(netlink_sock, &dump_policies, sizeof(dump_policies), 0); + ASSERT_EQ(n, sizeof(dump_policies)); + + mq_fd = syscall(__NR_mq_open, "sed", O_CREAT | O_WRONLY, 0600, 0); + ASSERT_GE(mq_fd, 0); + + memset(&sigev, 0, sizeof(sigev)); + sigev.sigev_notify = SIGEV_THREAD; + sigev.sigev_value.sival_ptr = cookie; + sigev.sigev_signo = netlink_sock; + + syscall(__NR_mq_notify, mq_fd, &sigev); + + close(netlink_sock); + + // give mqueue time to fire + usleep(100 * 1000); +} + +TEST_HARNESS_MAIN -- cgit v1.3.1 From 0268d4579901821ff17259213c2d8c9679995d48 Mon Sep 17 00:00:00 2001 From: Muhammad Usama Anjum Date: Fri, 1 Nov 2024 19:15:57 +0500 Subject: selftests: hugetlb_dio: check for initial conditions to skip in the start The test should be skipped if initial conditions aren't fulfilled in the start instead of failing and outputting non-compliant TAP logs. This kind of failure pollutes the results. The initial conditions are: - The test should only execute if /tmp file can be allocated. - The test should only execute if huge pages are free. Before: TAP version 13 1..4 Bail out! Error opening file : Read-only file system (30) # Planned tests != run tests (4 != 0) # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:0 error:0 After: TAP version 13 1..0 # SKIP Unable to allocate file: Read-only file system Link: https://lkml.kernel.org/r/20241101141557.3159432-1-usama.anjum@collabora.com Signed-off-by: Muhammad Usama Anjum Fixes: 3a103b5315b7 ("selftest: mm: Test if hugepage does not get leaked during __bio_release_pages()") Cc: Muhammad Usama Anjum Cc: Shuah Khan Cc: Donet Tom Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/hugetlb_dio.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/mm/hugetlb_dio.c b/tools/testing/selftests/mm/hugetlb_dio.c index f9ac20c657ec..60001c142ce9 100644 --- a/tools/testing/selftests/mm/hugetlb_dio.c +++ b/tools/testing/selftests/mm/hugetlb_dio.c @@ -44,13 +44,6 @@ void run_dio_using_hugetlb(unsigned int start_off, unsigned int end_off) if (fd < 0) ksft_exit_fail_perror("Error opening file\n"); - /* Get the free huge pages before allocation */ - free_hpage_b = get_free_hugepages(); - if (free_hpage_b == 0) { - close(fd); - ksft_exit_skip("No free hugepage, exiting!\n"); - } - /* Allocate a hugetlb page */ orig_buffer = mmap(NULL, h_pagesize, mmap_prot, mmap_flags, -1, 0); if (orig_buffer == MAP_FAILED) { @@ -94,8 +87,20 @@ void run_dio_using_hugetlb(unsigned int start_off, unsigned int end_off) int main(void) { size_t pagesize = 0; + int fd; ksft_print_header(); + + /* Open the file to DIO */ + fd = open("/tmp", O_TMPFILE | O_RDWR | O_DIRECT, 0664); + if (fd < 0) + ksft_exit_skip("Unable to allocate file: %s\n", strerror(errno)); + close(fd); + + /* Check if huge pages are free */ + if (!get_free_hugepages()) + ksft_exit_skip("No free hugepage, exiting\n"); + ksft_set_plan(4); /* Get base page size */ -- cgit v1.3.1 From 10299cdde869abab7a42fb5ab905a47a4e2cd24e Mon Sep 17 00:00:00 2001 From: John Sperbeck Date: Tue, 5 Nov 2024 19:40:31 -0800 Subject: KVM: selftests: use X86_MEMTYPE_WB instead of VMX_BASIC_MEM_TYPE_WB In 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the kernel sources"), VMX_BASIC_MEM_TYPE_WB was removed. Use X86_MEMTYPE_WB instead. Fixes: 08a7d2525511 ("tools arch x86: Sync the msr-index.h copy with the kernel sources") Signed-off-by: John Sperbeck Message-ID: <20241106034031.503291-1-jsperbeck@google.com> Signed-off-by: Paolo Bonzini --- tools/testing/selftests/kvm/lib/x86_64/vmx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/kvm/lib/x86_64/vmx.c b/tools/testing/selftests/kvm/lib/x86_64/vmx.c index 089b8925b6b2..d7ac122820bf 100644 --- a/tools/testing/selftests/kvm/lib/x86_64/vmx.c +++ b/tools/testing/selftests/kvm/lib/x86_64/vmx.c @@ -200,7 +200,7 @@ static inline void init_vmcs_control_fields(struct vmx_pages *vmx) if (vmx->eptp_gpa) { uint64_t ept_paddr; struct eptPageTablePointer eptp = { - .memory_type = VMX_BASIC_MEM_TYPE_WB, + .memory_type = X86_MEMTYPE_WB, .page_walk_length = 3, /* + 1 */ .ad_enabled = ept_vpid_cap_supported(VMX_EPT_VPID_CAP_AD_BITS), .address = vmx->eptp_gpa >> PAGE_SHIFT_4K, -- cgit v1.3.1 From 252e01e68241d33bfe0ed1fc333220d9bd8b06df Mon Sep 17 00:00:00 2001 From: Jakub Kicinski Date: Thu, 7 Nov 2024 16:47:31 -0800 Subject: selftests: net: add netlink-dumps to .gitignore Commit 55d42a0c3f9c ("selftests: net: add a test for closing a netlink socket ith dump in progress") added a new test but did not add it to gitignore. Reviewed-by: Joe Damato Link: https://patch.msgid.link/20241108004731.2979878-1-kuba@kernel.org Signed-off-by: Jakub Kicinski --- tools/testing/selftests/net/.gitignore | 1 + 1 file changed, 1 insertion(+) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 217d8b7a7365..59fe07ee2df9 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -19,6 +19,7 @@ log.txt msg_oob msg_zerocopy ncdevmem +netlink-dumps nettest psock_fanout psock_snd -- cgit v1.3.1 From fae1980347bfd23325099b69db6638b94149a94c Mon Sep 17 00:00:00 2001 From: Donet Tom Date: Sun, 10 Nov 2024 00:49:03 -0600 Subject: selftests: hugetlb_dio: fixup check for initial conditions to skip in the start This test verifies that a hugepage, used as a user buffer for DIO operations, is correctly freed upon unmapping. To test this, we read the count of free hugepages before and after the mmap, DIO, and munmap operations, then check if the free hugepage count is the same. Reading free hugepages before the test was removed by commit 0268d4579901 ('selftests: hugetlb_dio: check for initial conditions to skip at the start'), causing the test to always fail. This patch adds back reading the free hugepages before starting the test. With this patch, the tests are now passing. Test results without this patch: ./tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 1 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 2 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 3 : Huge pages not freed! # No. Free pages before allocation : 0 # No. Free pages after munmap : 100 not ok 4 : Huge pages not freed! # Totals: pass:0 fail:4 xfail:0 xpass:0 skip:0 error:0 Test results with this patch: /tools/testing/selftests/mm/hugetlb_dio TAP version 13 1..4 # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 1 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 2 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 3 : Huge pages freed successfully ! # No. Free pages before allocation : 100 # No. Free pages after munmap : 100 ok 4 : Huge pages freed successfully ! # Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0 Link: https://lkml.kernel.org/r/20241110064903.23626-1-donettom@linux.ibm.com Fixes: 0268d4579901 ("selftests: hugetlb_dio: check for initial conditions to skip in the start") Signed-off-by: Donet Tom Cc: Muhammad Usama Anjum Cc: Shuah Khan Cc: Signed-off-by: Andrew Morton --- tools/testing/selftests/mm/hugetlb_dio.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/mm/hugetlb_dio.c b/tools/testing/selftests/mm/hugetlb_dio.c index 60001c142ce9..432d5af15e66 100644 --- a/tools/testing/selftests/mm/hugetlb_dio.c +++ b/tools/testing/selftests/mm/hugetlb_dio.c @@ -44,6 +44,13 @@ void run_dio_using_hugetlb(unsigned int start_off, unsigned int end_off) if (fd < 0) ksft_exit_fail_perror("Error opening file\n"); + /* Get the free huge pages before allocation */ + free_hpage_b = get_free_hugepages(); + if (free_hpage_b == 0) { + close(fd); + ksft_exit_skip("No free hugepage, exiting!\n"); + } + /* Allocate a hugetlb page */ orig_buffer = mmap(NULL, h_pagesize, mmap_prot, mmap_flags, -1, 0); if (orig_buffer == MAP_FAILED) { -- cgit v1.3.1 From 86fb6173d11e773a00a5b6d1b7bd17caff8692b8 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Mon, 11 Nov 2024 10:16:50 +0000 Subject: selftests: bonding: add ns multicast group testing Add a test to make sure the backup slaves join correct multicast group when arp_validate enabled and ns_ip6_target is set. Here is the result: TEST: arp_validate (active-backup ns_ip6_target arp_validate 0) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 1) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 2) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 3) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 4) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 5) [ OK ] TEST: arp_validate (join mcast group) [ OK ] TEST: arp_validate (active-backup ns_ip6_target arp_validate 6) [ OK ] TEST: arp_validate (join mcast group) [ OK ] Signed-off-by: Hangbin Liu Reviewed-by: Nikolay Aleksandrov Signed-off-by: Paolo Abeni --- .../selftests/drivers/net/bonding/bond_options.sh | 54 +++++++++++++++++++++- 1 file changed, 53 insertions(+), 1 deletion(-) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 41d0859feb7d..edc56e2cc606 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -11,6 +11,8 @@ ALL_TESTS=" lib_dir=$(dirname "$0") source ${lib_dir}/bond_topo_3d1c.sh +c_maddr="33:33:00:00:00:10" +g_maddr="33:33:00:00:02:54" skip_prio() { @@ -240,6 +242,54 @@ arp_validate_test() done } +# Testing correct multicast groups are added to slaves for ns targets +arp_validate_mcast() +{ + RET=0 + local arp_valid=$(cmd_jq "ip -n ${s_ns} -j -d link show bond0" ".[].linkinfo.info_data.arp_validate") + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + + for i in $(seq 0 2); do + maddr_list=$(ip -n ${s_ns} maddr show dev eth${i}) + + # arp_valid == 0 or active_slave should not join any maddrs + if { [ "$arp_valid" == "null" ] || [ "eth${i}" == ${active_slave} ]; } && \ + echo "$maddr_list" | grep -qE "${c_maddr}|${g_maddr}"; then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + # arp_valid != 0 and backup_slave should join both maddrs + elif [ "$arp_valid" != "null" ] && [ "eth${i}" != ${active_slave} ] && \ + ( ! echo "$maddr_list" | grep -q "${c_maddr}" || \ + ! echo "$maddr_list" | grep -q "${m_maddr}"); then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + fi + done + + # Do failover + ip -n ${s_ns} link set ${active_slave} down + # wait for active link change + slowwait 2 active_slave_changed $active_slave + active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + + for i in $(seq 0 2); do + maddr_list=$(ip -n ${s_ns} maddr show dev eth${i}) + + # arp_valid == 0 or active_slave should not join any maddrs + if { [ "$arp_valid" == "null" ] || [ "eth${i}" == ${active_slave} ]; } && \ + echo "$maddr_list" | grep -qE "${c_maddr}|${g_maddr}"; then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + # arp_valid != 0 and backup_slave should join both maddrs + elif [ "$arp_valid" != "null" ] && [ "eth${i}" != ${active_slave} ] && \ + ( ! echo "$maddr_list" | grep -q "${c_maddr}" || \ + ! echo "$maddr_list" | grep -q "${m_maddr}"); then + RET=1 + check_err 1 "arp_valid $arp_valid active_slave $active_slave, eth$i has mcast group" + fi + done +} + arp_validate_arp() { local mode=$1 @@ -261,8 +311,10 @@ arp_validate_ns() fi for val in $(seq 0 6); do - arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6} arp_validate $val" + arp_validate_test "mode $mode arp_interval 100 ns_ip6_target ${g_ip6},${c_ip6} arp_validate $val" log_test "arp_validate" "$mode ns_ip6_target arp_validate $val" + arp_validate_mcast + log_test "arp_validate" "join mcast group" done } -- cgit v1.3.1 From ca34aceb322bfcd6ab498884f1805ee12f983259 Mon Sep 17 00:00:00 2001 From: Alexandre Ferrieux Date: Wed, 13 Nov 2024 11:04:28 +0100 Subject: net: sched: u32: Add test case for systematic hnode IDR leaks Add a tdc test case to exercise the just-fixed systematic leak of IDR entries in u32 hnode disposal. Given the IDR in question is confined to the range [1..0x7FF], it is sufficient to create/delete the same filter 2048 times to fill it up and get a nonzero exit status from "tc filter add". Signed-off-by: Alexandre Ferrieux Acked-by: Jamal Hadi Salim Reviewed-by: Victor Nogueira Link: https://patch.msgid.link/20241113100428.360460-1-alexandre.ferrieux@orange.com Signed-off-by: Paolo Abeni --- .../selftests/tc-testing/tc-tests/filters/u32.json | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) (limited to 'tools/testing/selftests') diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/u32.json b/tools/testing/selftests/tc-testing/tc-tests/filters/u32.json index 24bd0c2a3014..b2ca9d4e991b 100644 --- a/tools/testing/selftests/tc-testing/tc-tests/filters/u32.json +++ b/tools/testing/selftests/tc-testing/tc-tests/filters/u32.json @@ -329,5 +329,29 @@ "teardown": [ "$TC qdisc del dev $DEV1 parent root drr" ] + }, + { + "id": "1234", + "name": "Exercise IDR leaks by creating/deleting a filter many (2048) times", + "category": [ + "filter", + "u32" + ], + "plugins": { + "requires": "nsPlugin" + }, + "setup": [ + "$TC qdisc add dev $DEV1 parent root handle 10: drr", + "$TC filter add dev $DEV1 parent 10:0 protocol ip prio 2 u32 match ip src 0.0.0.2/32 action drop", + "$TC filter add dev $DEV1 parent 10:0 protocol ip prio 3 u32 match ip src 0.0.0.3/32 action drop" + ], + "cmdUnderTest": "bash -c 'for i in {1..2048} ;do echo filter delete dev $DEV1 pref 3;echo filter add dev $DEV1 parent 10:0 protocol ip prio 3 u32 match ip src 0.0.0.3/32 action drop;done | $TC -b -'", + "expExitCode": "0", + "verifyCmd": "$TC filter show dev $DEV1", + "matchPattern": "protocol ip pref 3 u32", + "matchCount": "3", + "teardown": [ + "$TC qdisc del dev $DEV1 parent root drr" + ] } ] -- cgit v1.3.1