// SPDX-License-Identifier: GPL-2.0-only /* * Core IIO driver for Bosch BMA400 triaxial acceleration sensor. * * Copyright 2019 Dan Robertson * * TODO: * - Support for power management * - Support events and interrupts * - Create channel for step count * - Create channel for sensor time */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "bma400.h" /* * The G-range selection may be one of 2g, 4g, 8, or 16g. The scale may * be selected with the acc_range bits of the ACC_CONFIG1 register. * NB: This buffer is populated in the device init. */ static int bma400_scales[8]; /* * See the ACC_CONFIG1 section of the datasheet. * NB: This buffer is populated in the device init. */ static int bma400_sample_freqs[14]; static const int bma400_osr_range[] = { 0, 1, 3 }; static int tap_reset_timeout[BMA400_TAP_TIM_LIST_LEN] = { 300000, 400000, 500000, 600000 }; static int tap_max2min_time[BMA400_TAP_TIM_LIST_LEN] = { 30000, 45000, 60000, 90000 }; static int double_tap2_min_delay[BMA400_TAP_TIM_LIST_LEN] = { 20000, 40000, 60000, 80000 }; /* See the ACC_CONFIG0 section of the datasheet */ enum bma400_power_mode { POWER_MODE_SLEEP = 0x00, POWER_MODE_LOW = 0x01, POWER_MODE_NORMAL = 0x02, POWER_MODE_INVALID = 0x03, }; enum bma400_scan { BMA400_ACCL_X, BMA400_ACCL_Y, BMA400_ACCL_Z, BMA400_TEMP, }; struct bma400_sample_freq { int hz; int uhz; }; enum bma400_activity { BMA400_STILL, BMA400_WALKING, BMA400_RUNNING, }; struct bma400_data { struct device *dev; struct regmap *regmap; struct mutex mutex; /* data register lock */ struct iio_mount_matrix orientation; enum bma400_power_mode power_mode; struct bma400_sample_freq sample_freq; int oversampling_ratio; int scale; struct iio_trigger *trig; int steps_enabled; bool step_event_en; bool activity_event_en; unsigned int generic_event_en; unsigned int tap_event_en_bitmask; /* Correct time stamp alignment */ struct { __le16 buff[3]; u8 temperature; aligned_s64 ts; } buffer __aligned(IIO_DMA_MINALIGN); __le16 status; __be16 duration; }; static bool bma400_is_writable_reg(struct device *dev, unsigned int reg) { switch (reg) { case BMA400_CHIP_ID_REG: case BMA400_ERR_REG: case BMA400_STATUS_REG: case BMA400_X_AXIS_LSB_REG: case BMA400_X_AXIS_MSB_REG: case BMA400_Y_AXIS_LSB_REG: case BMA400_Y_AXIS_MSB_REG: case BMA400_Z_AXIS_LSB_REG: case BMA400_Z_AXIS_MSB_REG: case BMA400_SENSOR_TIME0: case BMA400_SENSOR_TIME1: case BMA400_SENSOR_TIME2: case BMA400_EVENT_REG: case BMA400_INT_STAT0_REG: case BMA400_INT_STAT1_REG: case BMA400_INT_STAT2_REG: case BMA400_TEMP_DATA_REG: case BMA400_FIFO_LENGTH0_REG: case BMA400_FIFO_LENGTH1_REG: case BMA400_FIFO_DATA_REG: case BMA400_STEP_CNT0_REG: case BMA400_STEP_CNT1_REG: case BMA400_STEP_CNT3_REG: case BMA400_STEP_STAT_REG: return false; default: return true; } } static bool bma400_is_volatile_reg(struct device *dev, unsigned int reg) { switch (reg) { case BMA400_ERR_REG: case BMA400_STATUS_REG: case BMA400_X_AXIS_LSB_REG: case BMA400_X_AXIS_MSB_REG: case BMA400_Y_AXIS_LSB_REG: case BMA400_Y_AXIS_MSB_REG: case BMA400_Z_AXIS_LSB_REG: case BMA400_Z_AXIS_MSB_REG: case BMA400_SENSOR_TIME0: case BMA400_SENSOR_TIME1: case BMA400_SENSOR_TIME2: case BMA400_EVENT_REG: case BMA400_INT_STAT0_REG: case BMA400_INT_STAT1_REG: case BMA400_INT_STAT2_REG: case BMA400_TEMP_DATA_REG: case BMA400_FIFO_LENGTH0_REG: case BMA400_FIFO_LENGTH1_REG: case BMA400_FIFO_DATA_REG: case BMA400_STEP_CNT0_REG: case BMA400_STEP_CNT1_REG: case BMA400_STEP_CNT3_REG: case BMA400_STEP_STAT_REG: return true; default: return false; } } const struct regmap_config bma400_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = BMA400_CMD_REG, .cache_type = REGCACHE_RBTREE, .writeable_reg = bma400_is_writable_reg, .volatile_reg = bma400_is_volatile_reg, }; EXPORT_SYMBOL_NS(bma400_regmap_config, IIO_BMA400); static const struct iio_mount_matrix * bma400_accel_get_mount_matrix(const struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { struct bma400_data *data = iio_priv(indio_dev); return &data->orientation; } static const struct iio_chan_spec_ext_info bma400_ext_info[] = { IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bma400_accel_get_mount_matrix), { } }; static const struct iio_event_spec bma400_step_detect_event = { .type = IIO_EV_TYPE_CHANGE, .dir = IIO_EV_DIR_NONE, .mask_separate = BIT(IIO_EV_INFO_ENABLE), }; static const struct iio_event_spec bma400_activity_event = { .type = IIO_EV_TYPE_CHANGE, .dir = IIO_EV_DIR_NONE, .mask_shared_by_type = BIT(IIO_EV_INFO_ENABLE), }; static const struct iio_event_spec bma400_accel_event[] = { { .type = IIO_EV_TYPE_MAG, .dir = IIO_EV_DIR_FALLING, .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_PERIOD) | BIT(IIO_EV_INFO_HYSTERESIS) | BIT(IIO_EV_INFO_ENABLE), }, { .type = IIO_EV_TYPE_MAG, .dir = IIO_EV_DIR_RISING, .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_PERIOD) | BIT(IIO_EV_INFO_HYSTERESIS) | BIT(IIO_EV_INFO_ENABLE), }, { .type = IIO_EV_TYPE_GESTURE, .dir = IIO_EV_DIR_SINGLETAP, .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_RESET_TIMEOUT), }, { .type = IIO_EV_TYPE_GESTURE, .dir = IIO_EV_DIR_DOUBLETAP, .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_RESET_TIMEOUT) | BIT(IIO_EV_INFO_TAP2_MIN_DELAY), }, }; static int usec_to_tapreg_raw(int usec, const int *time_list) { int index; for (index = 0; index < BMA400_TAP_TIM_LIST_LEN; index++) { if (usec == time_list[index]) return index; } return -EINVAL; } static ssize_t in_accel_gesture_tap_maxtomin_time_show(struct device *dev, struct device_attribute *attr, char *buf) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct bma400_data *data = iio_priv(indio_dev); int ret, reg_val, raw, vals[2]; ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); if (ret) return ret; raw = FIELD_GET(BMA400_TAP_TICSTH_MSK, reg_val); vals[0] = 0; vals[1] = tap_max2min_time[raw]; return iio_format_value(buf, IIO_VAL_INT_PLUS_MICRO, 2, vals); } static ssize_t in_accel_gesture_tap_maxtomin_time_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct bma400_data *data = iio_priv(indio_dev); int ret, val_int, val_fract, raw; ret = iio_str_to_fixpoint(buf, 100000, &val_int, &val_fract); if (ret) return ret; raw = usec_to_tapreg_raw(val_fract, tap_max2min_time); if (raw < 0) return -EINVAL; ret = regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, BMA400_TAP_TICSTH_MSK, FIELD_PREP(BMA400_TAP_TICSTH_MSK, raw)); if (ret) return ret; return len; } static IIO_DEVICE_ATTR_RW(in_accel_gesture_tap_maxtomin_time, 0); /* * Tap interrupts works with 200 Hz input data rate and the time based tap * controls are in the terms of data samples so the below calculation is * used to convert the configuration values into seconds. * e.g.: * 60 data samples * 0.005 ms = 0.3 seconds. * 80 data samples * 0.005 ms = 0.4 seconds. */ /* quiet configuration values in seconds */ static IIO_CONST_ATTR(in_accel_gesture_tap_reset_timeout_available, "0.3 0.4 0.5 0.6"); /* tics_th configuration values in seconds */ static IIO_CONST_ATTR(in_accel_gesture_tap_maxtomin_time_available, "0.03 0.045 0.06 0.09"); /* quiet_dt configuration values in seconds */ static IIO_CONST_ATTR(in_accel_gesture_doubletap_tap2_min_delay_available, "0.02 0.04 0.06 0.08"); /* List of sensitivity values available to configure tap interrupts */ static IIO_CONST_ATTR(in_accel_gesture_tap_value_available, "0 1 2 3 4 5 6 7"); static struct attribute *bma400_event_attributes[] = { &iio_const_attr_in_accel_gesture_tap_value_available.dev_attr.attr, &iio_const_attr_in_accel_gesture_tap_reset_timeout_available.dev_attr.attr, &iio_const_attr_in_accel_gesture_tap_maxtomin_time_available.dev_attr.attr, &iio_const_attr_in_accel_gesture_doubletap_tap2_min_delay_available.dev_attr.attr, &iio_dev_attr_in_accel_gesture_tap_maxtomin_time.dev_attr.attr, NULL }; static const struct attribute_group bma400_event_attribute_group = { .attrs = bma400_event_attributes, }; #define BMA400_ACC_CHANNEL(_index, _axis) { \ .type = IIO_ACCEL, \ .modified = 1, \ .channel2 = IIO_MOD_##_axis, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SAMP_FREQ) | \ BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \ .ext_info = bma400_ext_info, \ .scan_index = _index, \ .scan_type = { \ .sign = 's', \ .realbits = 12, \ .storagebits = 16, \ .endianness = IIO_LE, \ }, \ .event_spec = bma400_accel_event, \ .num_event_specs = ARRAY_SIZE(bma400_accel_event) \ } #define BMA400_ACTIVITY_CHANNEL(_chan2) { \ .type = IIO_ACTIVITY, \ .modified = 1, \ .channel2 = _chan2, \ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \ .scan_index = -1, /* No buffer support */ \ .event_spec = &bma400_activity_event, \ .num_event_specs = 1, \ } static const struct iio_chan_spec bma400_channels[] = { BMA400_ACC_CHANNEL(0, X), BMA400_ACC_CHANNEL(1, Y), BMA400_ACC_CHANNEL(2, Z), { .type = IIO_TEMP, .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SAMP_FREQ), .scan_index = 3, .scan_type = { .sign = 's', .realbits = 8, .storagebits = 8, .endianness = IIO_LE, }, }, { .type = IIO_STEPS, .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | BIT(IIO_CHAN_INFO_ENABLE), .scan_index = -1, /* No buffer support */ .event_spec = &bma400_step_detect_event, .num_event_specs = 1, }, BMA400_ACTIVITY_CHANNEL(IIO_MOD_STILL), BMA400_ACTIVITY_CHANNEL(IIO_MOD_WALKING), BMA400_ACTIVITY_CHANNEL(IIO_MOD_RUNNING), IIO_CHAN_SOFT_TIMESTAMP(4), }; static int bma400_get_temp_reg(struct bma400_data *data, int *val, int *val2) { unsigned int raw_temp; int host_temp; int ret; if (data->power_mode == POWER_MODE_SLEEP) return -EBUSY; ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &raw_temp); if (ret) return ret; host_temp = sign_extend32(raw_temp, 7); /* * The formula for the TEMP_DATA register in the datasheet * is: x * 0.5 + 23 */ *val = (host_temp >> 1) + 23; *val2 = (host_temp & 0x1) * 500000; return IIO_VAL_INT_PLUS_MICRO; } static int bma400_get_accel_reg(struct bma400_data *data, const struct iio_chan_spec *chan, int *val) { __le16 raw_accel; int lsb_reg; int ret; if (data->power_mode == POWER_MODE_SLEEP) return -EBUSY; switch (chan->channel2) { case IIO_MOD_X: lsb_reg = BMA400_X_AXIS_LSB_REG; break; case IIO_MOD_Y: lsb_reg = BMA400_Y_AXIS_LSB_REG; break; case IIO_MOD_Z: lsb_reg = BMA400_Z_AXIS_LSB_REG; break; default: dev_err(data->dev, "invalid axis channel modifier\n"); return -EINVAL; } /* bulk read two registers, with the base being the LSB register */ ret = regmap_bulk_read(data->regmap, lsb_reg, &raw_accel, sizeof(raw_accel)); if (ret) return ret; *val = sign_extend32(le16_to_cpu(raw_accel), 11); return IIO_VAL_INT; } static void bma400_output_data_rate_from_raw(int raw, unsigned int *val, unsigned int *val2) { *val = BMA400_ACC_ODR_MAX_HZ >> (BMA400_ACC_ODR_MAX_RAW - raw); if (raw > BMA400_ACC_ODR_MIN_RAW) *val2 = 0; else *val2 = 500000; } static int bma400_get_accel_output_data_rate(struct bma400_data *data) { unsigned int val; unsigned int odr; int ret; switch (data->power_mode) { case POWER_MODE_LOW: /* * Runs at a fixed rate in low-power mode. See section 4.3 * in the datasheet. */ bma400_output_data_rate_from_raw(BMA400_ACC_ODR_LP_RAW, &data->sample_freq.hz, &data->sample_freq.uhz); return 0; case POWER_MODE_NORMAL: /* * In normal mode the ODR can be found in the ACC_CONFIG1 * register. */ ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val); if (ret) goto error; odr = val & BMA400_ACC_ODR_MASK; if (odr < BMA400_ACC_ODR_MIN_RAW || odr > BMA400_ACC_ODR_MAX_RAW) { ret = -EINVAL; goto error; } bma400_output_data_rate_from_raw(odr, &data->sample_freq.hz, &data->sample_freq.uhz); return 0; case POWER_MODE_SLEEP: data->sample_freq.hz = 0; data->sample_freq.uhz = 0; return 0; default: ret = 0; goto error; } error: data->sample_freq.hz = -1; data->sample_freq.uhz = -1; return ret; } static int bma400_set_accel_output_data_rate(struct bma400_data *data, int hz, int uhz) { unsigned int idx; unsigned int odr; unsigned int val; int ret; if (hz >= BMA400_ACC_ODR_MIN_WHOLE_HZ) { if (uhz || hz > BMA400_ACC_ODR_MAX_HZ) return -EINVAL; /* Note this works because MIN_WHOLE_HZ is odd */ idx = __ffs(hz); if (hz >> idx != BMA400_ACC_ODR_MIN_WHOLE_HZ) return -EINVAL; idx += BMA400_ACC_ODR_MIN_RAW + 1; } else if (hz == BMA400_ACC_ODR_MIN_HZ && uhz == 500000) { idx = BMA400_ACC_ODR_MIN_RAW; } else { return -EINVAL; } ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val); if (ret) return ret; /* preserve the range and normal mode osr */ odr = (~BMA400_ACC_ODR_MASK & val) | idx; ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, odr); if (ret) return ret; bma400_output_data_rate_from_raw(idx, &data->sample_freq.hz, &data->sample_freq.uhz); return 0; } static int bma400_get_accel_oversampling_ratio(struct bma400_data *data) { unsigned int val; unsigned int osr; int ret; /* * The oversampling ratio is stored in a different register * based on the power-mode. In normal mode the OSR is stored * in ACC_CONFIG1. In low-power mode it is stored in * ACC_CONFIG0. */ switch (data->power_mode) { case POWER_MODE_LOW: ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val); if (ret) { data->oversampling_ratio = -1; return ret; } osr = (val & BMA400_LP_OSR_MASK) >> BMA400_LP_OSR_SHIFT; data->oversampling_ratio = osr; return 0; case POWER_MODE_NORMAL: ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val); if (ret) { data->oversampling_ratio = -1; return ret; } osr = (val & BMA400_NP_OSR_MASK) >> BMA400_NP_OSR_SHIFT; data->oversampling_ratio = osr; return 0; case POWER_MODE_SLEEP: data->oversampling_ratio = 0; return 0; default: data->oversampling_ratio = -1; return -EINVAL; } } static int bma400_set_accel_oversampling_ratio(struct bma400_data *data, int val) { unsigned int acc_config; int ret; if (val & ~BMA400_TWO_BITS_MASK) return -EINVAL; /* * The oversampling ratio is stored in a different register * based on the power-mode. */ switch (data->power_mode) { case POWER_MODE_LOW: ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &acc_config); if (ret) return ret; ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG, (acc_config & ~BMA400_LP_OSR_MASK) | (val << BMA400_LP_OSR_SHIFT)); if (ret) { dev_err(data->dev, "Failed to write out OSR\n"); return ret; } data->oversampling_ratio = val; return 0; case POWER_MODE_NORMAL: ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &acc_config); if (ret) return ret; ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, (acc_config & ~BMA400_NP_OSR_MASK) | (val << BMA400_NP_OSR_SHIFT)); if (ret) { dev_err(data->dev, "Failed to write out OSR\n"); return ret; } data->oversampling_ratio = val; return 0; default: return -EINVAL; } return ret; } static int bma400_accel_scale_to_raw(struct bma400_data *data, unsigned int val) { int raw; if (val == 0) return -EINVAL; /* Note this works because BMA400_SCALE_MIN is odd */ raw = __ffs(val); if (val >> raw != BMA400_SCALE_MIN) return -EINVAL; return raw; } static int bma400_get_accel_scale(struct bma400_data *data) { unsigned int raw_scale; unsigned int val; int ret; ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &val); if (ret) return ret; raw_scale = (val & BMA400_ACC_SCALE_MASK) >> BMA400_SCALE_SHIFT; if (raw_scale > BMA400_TWO_BITS_MASK) return -EINVAL; data->scale = BMA400_SCALE_MIN << raw_scale; return 0; } static int bma400_set_accel_scale(struct bma400_data *data, unsigned int val) { unsigned int acc_config; int raw; int ret; ret = regmap_read(data->regmap, BMA400_ACC_CONFIG1_REG, &acc_config); if (ret) return ret; raw = bma400_accel_scale_to_raw(data, val); if (raw < 0) return raw; ret = regmap_write(data->regmap, BMA400_ACC_CONFIG1_REG, (acc_config & ~BMA400_ACC_SCALE_MASK) | (raw << BMA400_SCALE_SHIFT)); if (ret) return ret; data->scale = val; return 0; } static int bma400_get_power_mode(struct bma400_data *data) { unsigned int val; int ret; ret = regmap_read(data->regmap, BMA400_STATUS_REG, &val); if (ret) { dev_err(data->dev, "Failed to read status register\n"); return ret; } data->power_mode = (val >> 1) & BMA400_TWO_BITS_MASK; return 0; } static int bma400_set_power_mode(struct bma400_data *data, enum bma400_power_mode mode) { unsigned int val; int ret; ret = regmap_read(data->regmap, BMA400_ACC_CONFIG0_REG, &val); if (ret) return ret; if (data->power_mode == mode) return 0; if (mode == POWER_MODE_INVALID) return -EINVAL; /* Preserve the low-power oversample ratio etc */ ret = regmap_write(data->regmap, BMA400_ACC_CONFIG0_REG, mode | (val & ~BMA400_TWO_BITS_MASK)); if (ret) { dev_err(data->dev, "Failed to write to power-mode\n"); return ret; } data->power_mode = mode; /* * Update our cached osr and odr based on the new * power-mode. */ bma400_get_accel_output_data_rate(data); bma400_get_accel_oversampling_ratio(data); return 0; } static int bma400_enable_steps(struct bma400_data *data, int val) { int ret; if (data->steps_enabled == val) return 0; ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, BMA400_STEP_INT_MSK, FIELD_PREP(BMA400_STEP_INT_MSK, val ? 1 : 0)); if (ret) return ret; data->steps_enabled = val; return ret; } static int bma400_get_steps_reg(struct bma400_data *data, int *val) { int ret; u8 *steps_raw __free(kfree) = kmalloc(BMA400_STEP_RAW_LEN, GFP_KERNEL); if (!steps_raw) return -ENOMEM; ret = regmap_bulk_read(data->regmap, BMA400_STEP_CNT0_REG, steps_raw, BMA400_STEP_RAW_LEN); if (ret) return ret; *val = get_unaligned_le24(steps_raw); return IIO_VAL_INT; } static void bma400_init_tables(void) { int raw; int i; for (i = 0; i + 1 < ARRAY_SIZE(bma400_sample_freqs); i += 2) { raw = (i / 2) + 5; bma400_output_data_rate_from_raw(raw, &bma400_sample_freqs[i], &bma400_sample_freqs[i + 1]); } for (i = 0; i + 1 < ARRAY_SIZE(bma400_scales); i += 2) { raw = i / 2; bma400_scales[i] = 0; bma400_scales[i + 1] = BMA400_SCALE_MIN << raw; } } static void bma400_power_disable(void *data_ptr) { struct bma400_data *data = data_ptr; int ret; mutex_lock(&data->mutex); ret = bma400_set_power_mode(data, POWER_MODE_SLEEP); mutex_unlock(&data->mutex); if (ret) dev_warn(data->dev, "Failed to put device into sleep mode (%pe)\n", ERR_PTR(ret)); } static enum iio_modifier bma400_act_to_mod(enum bma400_activity activity) { switch (activity) { case BMA400_STILL: return IIO_MOD_STILL; case BMA400_WALKING: return IIO_MOD_WALKING; case BMA400_RUNNING: return IIO_MOD_RUNNING; default: return IIO_NO_MOD; } } static int bma400_init(struct bma400_data *data) { static const char * const regulator_names[] = { "vdd", "vddio" }; unsigned int val; int ret; ret = devm_regulator_bulk_get_enable(data->dev, ARRAY_SIZE(regulator_names), regulator_names); if (ret) return dev_err_probe(data->dev, ret, "Failed to get regulators\n"); /* Try to read chip_id register. It must return 0x90. */ ret = regmap_read(data->regmap, BMA400_CHIP_ID_REG, &val); if (ret) { dev_err(data->dev, "Failed to read chip id register\n"); return ret; } if (val != BMA400_ID_REG_VAL) { dev_err(data->dev, "Chip ID mismatch\n"); return -ENODEV; } ret = bma400_get_power_mode(data); if (ret) { dev_err(data->dev, "Failed to get the initial power-mode\n"); return ret; } if (data->power_mode != POWER_MODE_NORMAL) { ret = bma400_set_power_mode(data, POWER_MODE_NORMAL); if (ret) { dev_err(data->dev, "Failed to wake up the device\n"); return ret; } /* * TODO: The datasheet waits 1500us here in the example, but * lists 2/ODR as the wakeup time. */ usleep_range(1500, 2000); } ret = devm_add_action_or_reset(data->dev, bma400_power_disable, data); if (ret) return ret; bma400_init_tables(); ret = bma400_get_accel_output_data_rate(data); if (ret) return ret; ret = bma400_get_accel_oversampling_ratio(data); if (ret) return ret; ret = bma400_get_accel_scale(data); if (ret) return ret; /* Configure INT1 pin to open drain */ ret = regmap_write(data->regmap, BMA400_INT_IO_CTRL_REG, 0x06); if (ret) return ret; /* * Once the interrupt engine is supported we might use the * data_src_reg, but for now ensure this is set to the * variable ODR filter selectable by the sample frequency * channel. */ return regmap_write(data->regmap, BMA400_ACC_CONFIG2_REG, 0x00); } static int bma400_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int *val, int *val2, long mask) { struct bma400_data *data = iio_priv(indio_dev); unsigned int activity; int ret; switch (mask) { case IIO_CHAN_INFO_PROCESSED: switch (chan->type) { case IIO_TEMP: mutex_lock(&data->mutex); ret = bma400_get_temp_reg(data, val, val2); mutex_unlock(&data->mutex); return ret; case IIO_STEPS: return bma400_get_steps_reg(data, val); case IIO_ACTIVITY: ret = regmap_read(data->regmap, BMA400_STEP_STAT_REG, &activity); if (ret) return ret; /* * The device does not support confidence value levels, * so we will always have 100% for current activity and * 0% for the others. */ if (chan->channel2 == bma400_act_to_mod(activity)) *val = 100; else *val = 0; return IIO_VAL_INT; default: return -EINVAL; } case IIO_CHAN_INFO_RAW: mutex_lock(&data->mutex); ret = bma400_get_accel_reg(data, chan, val); mutex_unlock(&data->mutex); return ret; case IIO_CHAN_INFO_SAMP_FREQ: switch (chan->type) { case IIO_ACCEL: if (data->sample_freq.hz < 0) return -EINVAL; *val = data->sample_freq.hz; *val2 = data->sample_freq.uhz; return IIO_VAL_INT_PLUS_MICRO; case IIO_TEMP: /* * Runs at a fixed sampling frequency. See Section 4.4 * of the datasheet. */ *val = 6; *val2 = 250000; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } case IIO_CHAN_INFO_SCALE: *val = 0; *val2 = data->scale; return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: /* * TODO: We could avoid this logic and returning -EINVAL here if * we set both the low-power and normal mode OSR registers when * we configure the device. */ if (data->oversampling_ratio < 0) return -EINVAL; *val = data->oversampling_ratio; return IIO_VAL_INT; case IIO_CHAN_INFO_ENABLE: *val = data->steps_enabled; return IIO_VAL_INT; default: return -EINVAL; } } static int bma400_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, const int **vals, int *type, int *length, long mask) { switch (mask) { case IIO_CHAN_INFO_SCALE: *type = IIO_VAL_INT_PLUS_MICRO; *vals = bma400_scales; *length = ARRAY_SIZE(bma400_scales); return IIO_AVAIL_LIST; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: *type = IIO_VAL_INT; *vals = bma400_osr_range; *length = ARRAY_SIZE(bma400_osr_range); return IIO_AVAIL_RANGE; case IIO_CHAN_INFO_SAMP_FREQ: *type = IIO_VAL_INT_PLUS_MICRO; *vals = bma400_sample_freqs; *length = ARRAY_SIZE(bma400_sample_freqs); return IIO_AVAIL_LIST; default: return -EINVAL; } } static int bma400_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, int val, int val2, long mask) { struct bma400_data *data = iio_priv(indio_dev); int ret; switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: /* * The sample frequency is readonly for the temperature * register and a fixed value in low-power mode. */ if (chan->type != IIO_ACCEL) return -EINVAL; mutex_lock(&data->mutex); ret = bma400_set_accel_output_data_rate(data, val, val2); mutex_unlock(&data->mutex); return ret; case IIO_CHAN_INFO_SCALE: if (val != 0 || val2 < BMA400_SCALE_MIN || val2 > BMA400_SCALE_MAX) return -EINVAL; mutex_lock(&data->mutex); ret = bma400_set_accel_scale(data, val2); mutex_unlock(&data->mutex); return ret; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: mutex_lock(&data->mutex); ret = bma400_set_accel_oversampling_ratio(data, val); mutex_unlock(&data->mutex); return ret; case IIO_CHAN_INFO_ENABLE: mutex_lock(&data->mutex); ret = bma400_enable_steps(data, val); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } } static int bma400_write_raw_get_fmt(struct iio_dev *indio_dev, struct iio_chan_spec const *chan, long mask) { switch (mask) { case IIO_CHAN_INFO_SAMP_FREQ: return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_SCALE: return IIO_VAL_INT_PLUS_MICRO; case IIO_CHAN_INFO_OVERSAMPLING_RATIO: return IIO_VAL_INT; case IIO_CHAN_INFO_ENABLE: return IIO_VAL_INT; default: return -EINVAL; } } static int bma400_read_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir) { struct bma400_data *data = iio_priv(indio_dev); switch (chan->type) { case IIO_ACCEL: switch (dir) { case IIO_EV_DIR_RISING: return FIELD_GET(BMA400_INT_GEN1_MSK, data->generic_event_en); case IIO_EV_DIR_FALLING: return FIELD_GET(BMA400_INT_GEN2_MSK, data->generic_event_en); case IIO_EV_DIR_SINGLETAP: return FIELD_GET(BMA400_S_TAP_MSK, data->tap_event_en_bitmask); case IIO_EV_DIR_DOUBLETAP: return FIELD_GET(BMA400_D_TAP_MSK, data->tap_event_en_bitmask); default: return -EINVAL; } case IIO_STEPS: return data->step_event_en; case IIO_ACTIVITY: return data->activity_event_en; default: return -EINVAL; } } static int bma400_steps_event_enable(struct bma400_data *data, int state) { int ret; ret = bma400_enable_steps(data, 1); if (ret) return ret; ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG, BMA400_STEP_INT_MSK, FIELD_PREP(BMA400_STEP_INT_MSK, state)); if (ret) return ret; data->step_event_en = state; return 0; } static int bma400_activity_event_en(struct bma400_data *data, enum iio_event_direction dir, int state) { int ret, reg, msk, value; int field_value = 0; switch (dir) { case IIO_EV_DIR_RISING: reg = BMA400_GEN1INT_CONFIG0; msk = BMA400_INT_GEN1_MSK; value = 2; set_mask_bits(&field_value, BMA400_INT_GEN1_MSK, FIELD_PREP(BMA400_INT_GEN1_MSK, state)); break; case IIO_EV_DIR_FALLING: reg = BMA400_GEN2INT_CONFIG0; msk = BMA400_INT_GEN2_MSK; value = 0; set_mask_bits(&field_value, BMA400_INT_GEN2_MSK, FIELD_PREP(BMA400_INT_GEN2_MSK, state)); break; default: return -EINVAL; } /* Enabling all axis for interrupt evaluation */ ret = regmap_write(data->regmap, reg, 0xF8); if (ret) return ret; /* OR combination of all axis for interrupt evaluation */ ret = regmap_write(data->regmap, reg + BMA400_GEN_CONFIG1_OFF, value); if (ret) return ret; /* Initial value to avoid interrupts while enabling*/ ret = regmap_write(data->regmap, reg + BMA400_GEN_CONFIG2_OFF, 0x0A); if (ret) return ret; /* Initial duration value to avoid interrupts while enabling*/ ret = regmap_write(data->regmap, reg + BMA400_GEN_CONFIG31_OFF, 0x0F); if (ret) return ret; ret = regmap_update_bits(data->regmap, BMA400_INT1_MAP_REG, msk, field_value); if (ret) return ret; ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG0_REG, msk, field_value); if (ret) return ret; set_mask_bits(&data->generic_event_en, msk, field_value); return 0; } static int bma400_tap_event_en(struct bma400_data *data, enum iio_event_direction dir, int state) { unsigned int mask; unsigned int field_value = 0; int ret; /* * Tap interrupts can be configured only in normal mode. * See table in section 4.3 "Power modes - performance modes" of * datasheet v1.2. */ if (data->power_mode != POWER_MODE_NORMAL) return -EINVAL; /* * Tap interrupts are operating with a data rate of 200Hz. * See section 4.7 "Tap sensing interrupt" in datasheet v1.2. */ if (data->sample_freq.hz != 200 && state) { dev_err(data->dev, "Invalid data rate for tap interrupts.\n"); return -EINVAL; } ret = regmap_update_bits(data->regmap, BMA400_INT12_MAP_REG, BMA400_S_TAP_MSK, FIELD_PREP(BMA400_S_TAP_MSK, state)); if (ret) return ret; switch (dir) { case IIO_EV_DIR_SINGLETAP: mask = BMA400_S_TAP_MSK; set_mask_bits(&field_value, BMA400_S_TAP_MSK, FIELD_PREP(BMA400_S_TAP_MSK, state)); break; case IIO_EV_DIR_DOUBLETAP: mask = BMA400_D_TAP_MSK; set_mask_bits(&field_value, BMA400_D_TAP_MSK, FIELD_PREP(BMA400_D_TAP_MSK, state)); break; default: return -EINVAL; } ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG1_REG, mask, field_value); if (ret) return ret; set_mask_bits(&data->tap_event_en_bitmask, mask, field_value); return 0; } static int bma400_disable_adv_interrupt(struct bma400_data *data) { int ret; ret = regmap_write(data->regmap, BMA400_INT_CONFIG0_REG, 0); if (ret) return ret; ret = regmap_write(data->regmap, BMA400_INT_CONFIG1_REG, 0); if (ret) return ret; data->tap_event_en_bitmask = 0; data->generic_event_en = 0; data->step_event_en = false; data->activity_event_en = false; return 0; } static int bma400_write_event_config(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, bool state) { struct bma400_data *data = iio_priv(indio_dev); int ret; switch (chan->type) { case IIO_ACCEL: switch (type) { case IIO_EV_TYPE_MAG: mutex_lock(&data->mutex); ret = bma400_activity_event_en(data, dir, state); mutex_unlock(&data->mutex); return ret; case IIO_EV_TYPE_GESTURE: mutex_lock(&data->mutex); ret = bma400_tap_event_en(data, dir, state); mutex_unlock(&data->mutex); return ret; default: return -EINVAL; } case IIO_STEPS: mutex_lock(&data->mutex); ret = bma400_steps_event_enable(data, state); mutex_unlock(&data->mutex); return ret; case IIO_ACTIVITY: mutex_lock(&data->mutex); if (!data->step_event_en) { ret = bma400_steps_event_enable(data, true); if (ret) { mutex_unlock(&data->mutex); return ret; } } data->activity_event_en = state; mutex_unlock(&data->mutex); return 0; default: return -EINVAL; } } static int get_gen_config_reg(enum iio_event_direction dir) { switch (dir) { case IIO_EV_DIR_FALLING: return BMA400_GEN2INT_CONFIG0; case IIO_EV_DIR_RISING: return BMA400_GEN1INT_CONFIG0; default: return -EINVAL; } } static int bma400_read_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int *val, int *val2) { struct bma400_data *data = iio_priv(indio_dev); int ret, reg, reg_val, raw; if (chan->type != IIO_ACCEL) return -EINVAL; switch (type) { case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; *val2 = 0; switch (info) { case IIO_EV_INFO_VALUE: ret = regmap_read(data->regmap, reg + BMA400_GEN_CONFIG2_OFF, val); if (ret) return ret; return IIO_VAL_INT; case IIO_EV_INFO_PERIOD: mutex_lock(&data->mutex); ret = regmap_bulk_read(data->regmap, reg + BMA400_GEN_CONFIG3_OFF, &data->duration, sizeof(data->duration)); if (ret) { mutex_unlock(&data->mutex); return ret; } *val = be16_to_cpu(data->duration); mutex_unlock(&data->mutex); return IIO_VAL_INT; case IIO_EV_INFO_HYSTERESIS: ret = regmap_read(data->regmap, reg, val); if (ret) return ret; *val = FIELD_GET(BMA400_GEN_HYST_MSK, *val); return IIO_VAL_INT; default: return -EINVAL; } case IIO_EV_TYPE_GESTURE: switch (info) { case IIO_EV_INFO_VALUE: ret = regmap_read(data->regmap, BMA400_TAP_CONFIG, ®_val); if (ret) return ret; *val = FIELD_GET(BMA400_TAP_SEN_MSK, reg_val); return IIO_VAL_INT; case IIO_EV_INFO_RESET_TIMEOUT: ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); if (ret) return ret; raw = FIELD_GET(BMA400_TAP_QUIET_MSK, reg_val); *val = 0; *val2 = tap_reset_timeout[raw]; return IIO_VAL_INT_PLUS_MICRO; case IIO_EV_INFO_TAP2_MIN_DELAY: ret = regmap_read(data->regmap, BMA400_TAP_CONFIG1, ®_val); if (ret) return ret; raw = FIELD_GET(BMA400_TAP_QUIETDT_MSK, reg_val); *val = 0; *val2 = double_tap2_min_delay[raw]; return IIO_VAL_INT_PLUS_MICRO; default: return -EINVAL; } default: return -EINVAL; } } static int bma400_write_event_value(struct iio_dev *indio_dev, const struct iio_chan_spec *chan, enum iio_event_type type, enum iio_event_direction dir, enum iio_event_info info, int val, int val2) { struct bma400_data *data = iio_priv(indio_dev); int reg, ret, raw; if (chan->type != IIO_ACCEL) return -EINVAL; switch (type) { case IIO_EV_TYPE_MAG: reg = get_gen_config_reg(dir); if (reg < 0) return -EINVAL; switch (info) { case IIO_EV_INFO_VALUE: if (val < 1 || val > 255) return -EINVAL; return regmap_write(data->regmap, reg + BMA400_GEN_CONFIG2_OFF, val); case IIO_EV_INFO_PERIOD: if (val < 1 || val > 65535) return -EINVAL; mutex_lock(&data->mutex); put_unaligned_be16(val, &data->duration); ret = regmap_bulk_write(data->regmap, reg + BMA400_GEN_CONFIG3_OFF, &data->duration, sizeof(data->duration)); mutex_unlock(&data->mutex); return ret; case IIO_EV_INFO_HYSTERESIS: if (val < 0 || val > 3) return -EINVAL; return regmap_update_bits(data->regmap, reg, BMA400_GEN_HYST_MSK, FIELD_PREP(BMA400_GEN_HYST_MSK, val)); default: return -EINVAL; } case IIO_EV_TYPE_GESTURE: switch (info) { case IIO_EV_INFO_VALUE: if (val < 0 || val > 7) return -EINVAL; return regmap_update_bits(data->regmap, BMA400_TAP_CONFIG, BMA400_TAP_SEN_MSK, FIELD_PREP(BMA400_TAP_SEN_MSK, val)); case IIO_EV_INFO_RESET_TIMEOUT: raw = usec_to_tapreg_raw(val2, tap_reset_timeout); if (raw < 0) return -EINVAL; return regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, BMA400_TAP_QUIET_MSK, FIELD_PREP(BMA400_TAP_QUIET_MSK, raw)); case IIO_EV_INFO_TAP2_MIN_DELAY: raw = usec_to_tapreg_raw(val2, double_tap2_min_delay); if (raw < 0) return -EINVAL; return regmap_update_bits(data->regmap, BMA400_TAP_CONFIG1, BMA400_TAP_QUIETDT_MSK, FIELD_PREP(BMA400_TAP_QUIETDT_MSK, raw)); default: return -EINVAL; } default: return -EINVAL; } } static int bma400_data_rdy_trigger_set_state(struct iio_trigger *trig, bool state) { struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig); struct bma400_data *data = iio_priv(indio_dev); int ret; ret = regmap_update_bits(data->regmap, BMA400_INT_CONFIG0_REG, BMA400_INT_DRDY_MSK, FIELD_PREP(BMA400_INT_DRDY_MSK, state)); if (ret) return ret; return regmap_update_bits(data->regmap, BMA400_INT1_MAP_REG, BMA400_INT_DRDY_MSK, FIELD_PREP(BMA400_INT_DRDY_MSK, state)); } static const unsigned long bma400_avail_scan_masks[] = { BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z), BIT(BMA400_ACCL_X) | BIT(BMA400_ACCL_Y) | BIT(BMA400_ACCL_Z) | BIT(BMA400_TEMP), 0 }; static const struct iio_info bma400_info = { .read_raw = bma400_read_raw, .read_avail = bma400_read_avail, .write_raw = bma400_write_raw, .write_raw_get_fmt = bma400_write_raw_get_fmt, .read_event_config = bma400_read_event_config, .write_event_config = bma400_write_event_config, .write_event_value = bma400_write_event_value, .read_event_value = bma400_read_event_value, .event_attrs = &bma400_event_attribute_group, }; static const struct iio_trigger_ops bma400_trigger_ops = { .set_trigger_state = &bma400_data_rdy_trigger_set_state, .validate_device = &iio_trigger_validate_own_device, }; static irqreturn_t bma400_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bma400_data *data = iio_priv(indio_dev); int ret, temp; /* Lock to protect the data->buffer */ mutex_lock(&data->mutex); /* bulk read six registers, with the base being the LSB register */ ret = regmap_bulk_read(data->regmap, BMA400_X_AXIS_LSB_REG, &data->buffer.buff, sizeof(data->buffer.buff)); if (ret) goto unlock_err; if (test_bit(BMA400_TEMP, indio_dev->active_scan_mask)) { ret = regmap_read(data->regmap, BMA400_TEMP_DATA_REG, &temp); if (ret) goto unlock_err; data->buffer.temperature = temp; } iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer, iio_get_time_ns(indio_dev)); mutex_unlock(&data->mutex); iio_trigger_notify_done(indio_dev->trig); return IRQ_HANDLED; unlock_err: mutex_unlock(&data->mutex); return IRQ_NONE; } static irqreturn_t bma400_interrupt(int irq, void *private) { struct iio_dev *indio_dev = private; struct bma400_data *data = iio_priv(indio_dev); s64 timestamp = iio_get_time_ns(indio_dev); unsigned int act, ev_dir = IIO_EV_DIR_NONE; int ret; /* Lock to protect the data->status */ mutex_lock(&data->mutex); ret = regmap_bulk_read(data->regmap, BMA400_INT_STAT0_REG, &data->status, sizeof(data->status)); /* * if none of the bit is set in the status register then it is * spurious interrupt. */ if (ret || !data->status) goto unlock_err; /* * Disable all advance interrupts if interrupt engine overrun occurs. * See section 4.7 "Interrupt engine overrun" in datasheet v1.2. */ if (FIELD_GET(BMA400_INT_ENG_OVRUN_MSK, le16_to_cpu(data->status))) { bma400_disable_adv_interrupt(data); dev_err(data->dev, "Interrupt engine overrun\n"); goto unlock_err; } if (FIELD_GET(BMA400_INT_S_TAP_MSK, le16_to_cpu(data->status))) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X_OR_Y_OR_Z, IIO_EV_TYPE_GESTURE, IIO_EV_DIR_SINGLETAP), timestamp); if (FIELD_GET(BMA400_INT_D_TAP_MSK, le16_to_cpu(data->status))) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X_OR_Y_OR_Z, IIO_EV_TYPE_GESTURE, IIO_EV_DIR_DOUBLETAP), timestamp); if (FIELD_GET(BMA400_INT_GEN1_MSK, le16_to_cpu(data->status))) ev_dir = IIO_EV_DIR_RISING; if (FIELD_GET(BMA400_INT_GEN2_MSK, le16_to_cpu(data->status))) ev_dir = IIO_EV_DIR_FALLING; if (ev_dir != IIO_EV_DIR_NONE) { iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X_OR_Y_OR_Z, IIO_EV_TYPE_MAG, ev_dir), timestamp); } if (FIELD_GET(BMA400_STEP_STAT_MASK, le16_to_cpu(data->status))) { iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_STEPS, 0, IIO_NO_MOD, IIO_EV_TYPE_CHANGE, IIO_EV_DIR_NONE), timestamp); if (data->activity_event_en) { ret = regmap_read(data->regmap, BMA400_STEP_STAT_REG, &act); if (ret) goto unlock_err; iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACTIVITY, 0, bma400_act_to_mod(act), IIO_EV_TYPE_CHANGE, IIO_EV_DIR_NONE), timestamp); } } if (FIELD_GET(BMA400_INT_DRDY_MSK, le16_to_cpu(data->status))) { mutex_unlock(&data->mutex); iio_trigger_poll_nested(data->trig); return IRQ_HANDLED; } mutex_unlock(&data->mutex); return IRQ_HANDLED; unlock_err: mutex_unlock(&data->mutex); return IRQ_NONE; } int bma400_probe(struct device *dev, struct regmap *regmap, int irq, const char *name) { struct iio_dev *indio_dev; struct bma400_data *data; int ret; indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); data->regmap = regmap; data->dev = dev; ret = bma400_init(data); if (ret) return ret; ret = iio_read_mount_matrix(dev, &data->orientation); if (ret) return ret; mutex_init(&data->mutex); indio_dev->name = name; indio_dev->info = &bma400_info; indio_dev->channels = bma400_channels; indio_dev->num_channels = ARRAY_SIZE(bma400_channels); indio_dev->available_scan_masks = bma400_avail_scan_masks; indio_dev->modes = INDIO_DIRECT_MODE; if (irq > 0) { data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name, iio_device_id(indio_dev)); if (!data->trig) return -ENOMEM; data->trig->ops = &bma400_trigger_ops; iio_trigger_set_drvdata(data->trig, indio_dev); ret = devm_iio_trigger_register(data->dev, data->trig); if (ret) return dev_err_probe(data->dev, ret, "iio trigger register fail\n"); indio_dev->trig = iio_trigger_get(data->trig); ret = devm_request_threaded_irq(dev, irq, NULL, &bma400_interrupt, IRQF_TRIGGER_RISING | IRQF_ONESHOT, indio_dev->name, indio_dev); if (ret) return dev_err_probe(data->dev, ret, "request irq %d failed\n", irq); } ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, &bma400_trigger_handler, NULL); if (ret) return dev_err_probe(data->dev, ret, "iio triggered buffer setup failed\n"); return devm_iio_device_register(dev, indio_dev); } EXPORT_SYMBOL_NS(bma400_probe, IIO_BMA400); MODULE_AUTHOR("Dan Robertson "); MODULE_AUTHOR("Jagath Jog J "); MODULE_DESCRIPTION("Bosch BMA400 triaxial acceleration sensor core"); MODULE_LICENSE("GPL");