# SPDX-License-Identifier: GPL-2.0-only # # ADC drivers # # When adding new entries keep the list in alphabetical order menu "Analog to digital converters" config AB8500_GPADC bool "ST-Ericsson AB8500 GPADC driver" depends on AB8500_CORE && REGULATOR_AB8500 default y help AB8500 Analog Baseband, mixed signal integrated circuit GPADC (General Purpose Analog to Digital Converter) driver used to monitor internal voltages, convert accessory and battery, AC (charger, mains) and USB voltages integral to the U8500 platform. config AD_SIGMA_DELTA tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER config AD4000 tristate "Analog Devices AD4000 ADC Driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD4000 high speed SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad4000. config AD4130 tristate "Analog Device AD4130 ADC Driver" depends on SPI depends on GPIOLIB select IIO_BUFFER select IIO_KFIFO_BUF select REGMAP_SPI depends on COMMON_CLK help Say yes here to build support for Analog Devices AD4130-8 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad4130. config AD4695 tristate "Analog Device AD4695 ADC Driver" depends on SPI select REGMAP_SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD4695 and similar analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad4695. config AD7091R tristate config AD7091R5 tristate "Analog Devices AD7091R5 ADC Driver" depends on I2C select AD7091R select REGMAP_I2C help Say yes here to build support for Analog Devices AD7091R-5 ADC. config AD7091R8 tristate "Analog Devices AD7091R8 ADC Driver" depends on SPI select AD7091R select REGMAP_SPI help Say yes here to build support for Analog Devices AD7091R-2, AD7091R-4, and AD7091R-8 ADC. To compile this driver as a module, choose M here: the module will be called ad7091r8. config AD7124 tristate "Analog Devices AD7124 and similar sigma-delta ADCs driver" depends on SPI_MASTER select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7124-4 and AD7124-8 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7124. config AD7173 tristate "Analog Devices AD7173 driver" depends on SPI_MASTER select AD_SIGMA_DELTA select GPIO_REGMAP if GPIOLIB select REGMAP_SPI if GPIOLIB help Say yes here to build support for Analog Devices AD7173 and similar ADC Currently supported models: - AD7172-2 - AD7173-8 - AD7175-2 - AD7176-2 To compile this driver as a module, choose M here: the module will be called ad7173. config AD7192 tristate "Analog Devices AD7192 and similar ADC driver" depends on SPI select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices SPI analog to digital converters (ADC): - AD7190 - AD7192 - AD7193 - AD7194 - AD7195 If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7192. config AD7266 tristate "Analog Devices AD7265/AD7266 ADC driver" depends on SPI_MASTER select IIO_BUFFER select IIO_TRIGGER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7265 and AD7266 ADCs. To compile this driver as a module, choose M here: the module will be called ad7266. config AD7280 tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System" depends on SPI select CRC8 help Say yes here to build support for Analog Devices AD7280A Lithium Ion Battery Monitoring System. To compile this driver as a module, choose M here: the module will be called ad7280a config AD7291 tristate "Analog Devices AD7291 ADC driver" depends on I2C help Say yes here to build support for Analog Devices AD7291 8 Channel ADC with temperature sensor. To compile this driver as a module, choose M here: the module will be called ad7291. config AD7292 tristate "Analog Devices AD7292 ADC driver" depends on SPI help Say yes here to build support for Analog Devices AD7292 8 Channel ADC with temperature sensor. To compile this driver as a module, choose M here: the module will be called ad7292. config AD7298 tristate "Analog Devices AD7298 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7298 8 Channel ADC with temperature sensor. To compile this driver as a module, choose M here: the module will be called ad7298. config AD7380 tristate "Analog Devices AD7380 ADC driver" depends on SPI_MASTER select IIO_BUFFER select IIO_TRIGGER select IIO_TRIGGERED_BUFFER help AD7380 is a family of simultaneous sampling ADCs that share the same SPI register map and have similar pinouts. Say yes here to build support for Analog Devices AD7380 ADC and similar chips. To compile this driver as a module, choose M here: the module will be called ad7380. config AD7476 tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD and TI" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following SPI analog to digital converters (ADCs): Analog Devices: AD7273, AD7274, AD7276, AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, AD7495, AD7910, AD7920. Texas Instruments: ADS7866, ADS7867, ADS7868. To compile this driver as a module, choose M here: the module will be called ad7476. config AD7606 tristate select IIO_BUFFER select IIO_TRIGGERED_BUFFER config AD7606_IFACE_PARALLEL tristate "Analog Devices AD7606 ADC driver with parallel interface support" depends on HAS_IOPORT select AD7606 select IIO_BACKEND help Say yes here to build parallel interface support for Analog Devices: ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). It also support iio_backended devices for AD7606B. To compile this driver as a module, choose M here: the module will be called ad7606_par. config AD7606_IFACE_SPI tristate "Analog Devices AD7606 ADC driver with spi interface support" depends on SPI select AD7606 help Say yes here to build spi interface support for Analog Devices: ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7606_spi. config AD7625 tristate "Analog Devices AD7625/AD7626 High Speed ADC driver" depends on PWM select IIO_BACKEND help Say yes here to build support for Analog Devices: * AD7625 16-Bit, 6 MSPS PulSAR Analog-to-Digital Converter * AD7626 16-Bit, 10 MSPS PulSAR Analog-to-Digital Converter * AD7960 18-Bit, 5 MSPS PulSAR Analog-to-Digital Converter * AD7961 16-Bit, 5 MSPS PulSAR Analog-to-Digital Converter The driver requires the assistance of the AXI ADC IP core to operate. To compile this driver as a module, choose M here: the module will be called ad7625. config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7766, AD7766-1, AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters. To compile this driver as a module, choose M here: the module will be called ad7766. config AD7768_1 tristate "Analog Devices AD7768-1 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7768-1 SPI simultaneously sampling sigma-delta analog to digital converter (ADC). To compile this driver as a module, choose M here: the module will be called ad7768-1. config AD7779 tristate "Analog Devices AD7779 ADC driver" depends on SPI select CRC8 select IIO_BUFFER help Say yes here to build support for Analog Devices AD777X family (AD7770, AD7771, AD7779) analog to digital converter (ADC). To compile this driver as a module, choose M here: the module will be called ad7779. config AD7780 tristate "Analog Devices AD7780 and similar ADCs driver" depends on SPI depends on GPIOLIB || COMPILE_TEST select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7170, AD7171, AD7780 and AD7781 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7780. config AD7791 tristate "Analog Devices AD7791 ADC driver" depends on SPI select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, AD7790 and AD7791 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called ad7791. config AD7793 tristate "Analog Devices AD7793 and similar ADCs driver" depends on SPI select AD_SIGMA_DELTA help Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, AD7794 and AD7795 SPI analog to digital converters (ADC). To compile this driver as a module, choose M here: the module will be called AD7793. config AD7887 tristate "Analog Devices AD7887 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7887 SPI analog to digital converter (ADC). To compile this driver as a module, choose M here: the module will be called ad7887. config AD7923 tristate "Analog Devices AD7923 and similar ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. To compile this driver as a module, choose M here: the module will be called ad7923. config AD7944 tristate "Analog Devices AD7944 and similar ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7944, AD7985, AD7986 ADCs. To compile this driver as a module, choose M here: the module will be called ad7944 config AD7949 tristate "Analog Devices AD7949 and similar ADCs driver" depends on SPI help Say yes here to build support for Analog Devices AD7949, AD7682, AD7689 8 Channel ADCs. To compile this driver as a module, choose M here: the module will be called ad7949. config AD799X tristate "Analog Devices AD799x ADC driver" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices: ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998 i2c analog to digital converters (ADC). Provides direct access via sysfs. To compile this driver as a module, choose M here: the module will be called ad799x. config AD9467 tristate "Analog Devices AD9467 High Speed ADC driver" depends on SPI select IIO_BACKEND help Say yes here to build support for Analog Devices: * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter The driver requires the assistance of the AXI ADC IP core to operate, since SPI is used for configuration only, while data has to be streamed into memory via DMA. To compile this driver as a module, choose M here: the module will be called ad9467. config ADI_AXI_ADC tristate "Analog Devices Generic AXI ADC IP core driver" depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || COMPILE_TEST select IIO_BUFFER select IIO_BUFFER_HW_CONSUMER select IIO_BUFFER_DMAENGINE select REGMAP_MMIO select IIO_BACKEND help Say yes here to build support for Analog Devices Generic AXI ADC IP core. The IP core is used for interfacing with analog-to-digital (ADC) converters that require either a high-speed serial interface (JESD204B/C) or a source synchronous parallel interface (LVDS/CMOS). Typically (for such devices) SPI will be used for configuration only, while this IP core handles the streaming of data into memory via DMA. Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called adi-axi-adc. config ASPEED_ADC tristate "Aspeed ADC" depends on ARCH_ASPEED || COMPILE_TEST depends on COMMON_CLK help If you say yes here you get support for the ADC included in Aspeed BMC SoCs. To compile this driver as a module, choose M here: the module will be called aspeed_adc. config AT91_ADC tristate "Atmel AT91 ADC" depends on ARCH_AT91 || COMPILE_TEST depends on INPUT && SYSFS && OF select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Atmel AT91 ADC. To compile this driver as a module, choose M here: the module will be called at91_adc. config AT91_SAMA5D2_ADC tristate "Atmel AT91 SAMA5D2 ADC" depends on ARCH_AT91 || COMPILE_TEST depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Atmel SAMA5D2 ADC which is available on SAMA5D2 SoC family. To compile this driver as a module, choose M here: the module will be called at91-sama5d2_adc. config AXP20X_ADC tristate "X-Powers AXP20X and AXP22X ADC driver" depends on MFD_AXP20X help Say yes here to have support for X-Powers power management IC (PMIC) AXP20X and AXP22X ADC devices. To compile this driver as a module, choose M here: the module will be called axp20x_adc. config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X help Say yes here to have support for X-Powers power management IC (PMIC) ADC device. Depending on platform configuration, this general purpose ADC can be used for sampling sensors such as thermal resistors. To compile this driver as a module, choose M here: the module will be called axp288_adc. config BCM_IPROC_ADC tristate "Broadcom IPROC ADC driver" depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST depends on MFD_SYSCON default ARCH_BCM_CYGNUS help Say Y here if you want to add support for the Broadcom static ADC driver. Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8 channels. The driver allows the user to read voltage values. config BERLIN2_ADC tristate "Marvell Berlin2 ADC driver" depends on ARCH_BERLIN || COMPILE_TEST help Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for temperature measurement. config CC10001_ADC tristate "Cosmic Circuits 10001 ADC driver" depends on HAS_IOMEM && HAVE_CLK && REGULATOR select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Cosmic Circuits 10001 ADC. This driver can also be built as a module. If so, the module will be called cc10001_adc. config CPCAP_ADC tristate "Motorola CPCAP PMIC ADC driver" depends on MFD_CPCAP select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Motorola CPCAP PMIC ADC. This driver can also be built as a module. If so, the module will be called cpcap-adc. config DA9150_GPADC tristate "Dialog DA9150 GPADC driver support" depends on MFD_DA9150 help Say yes here to build support for Dialog DA9150 GPADC. This driver can also be built as a module. If chosen, the module name will be da9150-gpadc. To compile this driver as a module, choose M here: the module will be called berlin2-adc. config DLN2_ADC tristate "Diolan DLN-2 ADC driver support" depends on MFD_DLN2 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Diolan DLN-2 ADC. This driver can also be built as a module. If so, the module will be called adc_dln2. config ENVELOPE_DETECTOR tristate "Envelope detector using a DAC and a comparator" help Say yes here to build support for an envelope detector using a DAC and a comparator. To compile this driver as a module, choose M here: the module will be called envelope-detector. config EP93XX_ADC tristate "Cirrus Logic EP93XX ADC driver" depends on ARCH_EP93XX || COMPILE_TEST depends on HAS_IOMEM help Driver for the ADC module on the EP93XX series of SoC from Cirrus Logic. It's recommended to switch on CONFIG_HIGH_RES_TIMERS option, in this case driver will reduce its CPU usage by 90% in some use cases. To compile this driver as a module, choose M here: the module will be called ep93xx_adc. config EXYNOS_ADC tristate "Exynos ADC driver support" depends on ARCH_EXYNOS || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) depends on HAS_IOMEM help Driver for the ADC block found in the Samsung S3C6410, S5Pv210 and Exynos SoCs. Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will be called exynos_adc. config MXS_LRADC_ADC tristate "Freescale i.MX23/i.MX28 LRADC ADC" depends on MFD_MXS_LRADC select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the ADC functions of the i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings, battery voltage measurement, and die temperature measurement. This driver can also be built as a module. If so, the module will be called mxs-lradc-adc. config FSL_MX25_ADC tristate "Freescale MX25 ADC driver" depends on MFD_MX25_TSADC help Generic Conversion Queue driver used for general purpose ADC in the MX25. This driver supports single measurements using the MX25 ADC. config GEHC_PMC_ADC tristate "GE HealthCare PMC ADC driver" depends on I2C help Say yes here to build support for the GE HealthCare PMC 16-bit 16-Channel ADC. To compile this driver as a module, choose M here: the module will be called gehc-pmc-adc. config HI8435 tristate "Holt Integrated Circuits HI-8435 threshold detector" select IIO_TRIGGERED_EVENT depends on SPI help If you say yes here you get support for Holt Integrated Circuits HI-8435 chip. This driver can also be built as a module. If so, the module will be called hi8435. config HX711 tristate "AVIA HX711 ADC for weight cells" depends on GPIOLIB select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for AVIA HX711 ADC which is used for weigh cells This driver uses two GPIOs, one acts as the clock and controls the channel selection and gain, the other one is used for the measurement data Currently the raw value is read from the chip and delivered. To get an actual weight one needs to subtract the zero offset and multiply by a scale factor. This should be done in userspace. This driver can also be built as a module. If so, the module will be called hx711. config INA2XX_ADC tristate "Texas Instruments INA2xx Power Monitors IIO driver" depends on I2C && !SENSORS_INA2XX select REGMAP_I2C select IIO_BUFFER select IIO_KFIFO_BUF help Say yes here to build support for TI INA2xx family of Power Monitors. This driver is mutually exclusive with the HWMON version. config INGENIC_ADC tristate "Ingenic JZ47xx SoCs ADC driver" depends on MIPS || COMPILE_TEST select IIO_BUFFER help Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit. This driver can also be built as a module. If so, the module will be called ingenic_adc. config INTEL_MRFLD_ADC tristate "Intel Merrifield Basin Cove ADC driver" depends on INTEL_SOC_PMIC_MRFLD help Say yes here to have support for Basin Cove power management IC (PMIC) ADC device. Depending on platform configuration, this general purpose ADC can be used for sampling sensors such as thermal resistors. To compile this driver as a module, choose M here: the module will be called intel_mrfld_adc. config IMX7D_ADC tristate "Freescale IMX7D ADC driver" depends on ARCH_MXC || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for IMX7D ADC. This driver can also be built as a module. If so, the module will be called imx7d_adc. config IMX8QXP_ADC tristate "NXP IMX8QXP ADC driver" depends on ARCH_MXC || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for IMX8QXP ADC. This driver can also be built as a module. If so, the module will be called imx8qxp-adc. config IMX93_ADC tristate "IMX93 ADC driver" depends on ARCH_MXC || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for IMX93 ADC. This driver can also be built as a module. If so, the module will be called imx93_adc. config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788 help Say yes here to build support for TI LP8788 ADC. To compile this driver as a module, choose M here: the module will be called lp8788_adc. config LPC18XX_ADC tristate "NXP LPC18xx ADC driver" depends on ARCH_LPC18XX || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for NXP LPC18XX ADC. To compile this driver as a module, choose M here: the module will be called lpc18xx_adc. config LPC32XX_ADC tristate "NXP LPC32XX ADC" depends on ARCH_LPC32XX || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for the integrated ADC inside the LPC32XX SoC. Note that this feature uses the same hardware as the touchscreen driver, so you should either select only one of the two drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, activate only one via device tree selection. Provides direct access via sysfs. config LTC2309 tristate "Linear Technology LTC2309 ADC driver" depends on I2C help Say yes here to build support for Linear Technology LTC2309, a low noise, low power, 8-channel, 12-bit SAR ADC This driver can also be built as a module. If so, the module will be called ltc2309. config LTC2471 tristate "Linear Technology LTC2471 and LTC2473 ADC driver" depends on I2C help Say yes here to build support for Linear Technology LTC2471 and LTC2473 16-bit I2C ADC. This driver can also be built as a module. If so, the module will be called ltc2471. config LTC2485 tristate "Linear Technology LTC2485 ADC driver" depends on I2C help Say yes here to build support for Linear Technology LTC2485 ADC. To compile this driver as a module, choose M here: the module will be called ltc2485. config LTC2496 tristate "Linear Technology LTC2496 ADC driver" depends on SPI help Say yes here to build support for Linear Technology LTC2496 16-Bit 8-/16-Channel Delta Sigma ADC. To compile this driver as a module, choose M here: the module will be called ltc2496. config LTC2497 tristate "Linear Technology LTC2497 ADC driver" depends on I2C help Say yes here to build support for Linear Technology LTC2497 16-Bit 8-/16-Channel Delta Sigma ADC. To compile this driver as a module, choose M here: the module will be called ltc2497. config MAX1027 tristate "Maxim max1027 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Maxim SPI {10,12}-bit ADC models: max1027, max1029, max1031, max1227, max1229 and max1231. To compile this driver as a module, choose M here: the module will be called max1027. config MAX11100 tristate "Maxim max11100 ADC driver" depends on SPI_MASTER help Say yes here to build support for Maxim max11100 SPI ADC To compile this driver as a module, choose M here: the module will be called max11100. config MAX1118 tristate "Maxim max1117/max1118/max1119 ADCs driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Maxim max1117/max1118/max1119 8-bit, dual-channel ADCs. To compile this driver as a module, choose M here: the module will be called max1118. config MAX11205 tristate "Maxim max11205 ADC driver" depends on SPI select AD_SIGMA_DELTA select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Maxim max11205 16-bit, single-channel ultra-low power delta-sigma ADC. To compile this driver as a module, choose M here: the module will be called max11205. config MAX11410 tristate "Analog Devices MAX11410 ADC driver" depends on SPI select REGMAP_SPI select IIO_BUFFER select IIO_TRIGGER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices MAX11410 ADCs. To compile this driver as a module, choose M here: the module will be called max11410. config MAX1241 tristate "Maxim max1241 ADC driver" depends on SPI_MASTER help Say yes here to build support for Maxim max1241 12-bit, single-channel ADC. To compile this driver as a module, choose M here: the module will be called max1241. config MAX1363 tristate "Maxim max1363 ADC driver" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for many Maxim i2c analog to digital converters (ADC). (max1361, max1362, max1363, max1364, max1036, max1037, max1038, max1039, max1136, max1136, max1137, max1138, max1139, max1236, max1237, max11238, max1239, max11600, max11601, max11602, max11603, max11604, max11605, max11606, max11607, max11608, max11609, max11610, max11611, max11612, max11613, max11614, max11615, max11616, max11617, max11644, max11645, max11646, max11647) Provides direct access via sysfs and buffered data via the iio dev interface. To compile this driver as a module, choose M here: the module will be called max1363. config MAX34408 tristate "Maxim max34408/max344089 ADC driver" depends on I2C help Say yes here to build support for Maxim max34408/max34409 current sense monitor with 8-bits ADC interface with overcurrent delay/threshold and shutdown delay. To compile this driver as a module, choose M here: the module will be called max34408. config MAX77541_ADC tristate "Analog Devices MAX77541 ADC driver" depends on MFD_MAX77541 help This driver controls a Analog Devices MAX77541 ADC via I2C bus. This device has one adc. Say yes here to build support for Analog Devices MAX77541 ADC interface. To compile this driver as a module, choose M here: the module will be called max77541-adc. config MAX9611 tristate "Maxim max9611/max9612 ADC driver" depends on I2C help Say yes here to build support for Maxim max9611/max9612 current sense amplifier with 12-bits ADC interface. To compile this driver as a module, choose M here: the module will be called max9611. config MCP320X tristate "Microchip Technology MCP3x01/02/04/08 and MCP3550/1/3" depends on SPI help Say yes here to build support for Microchip Technology's MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204, MCP3208, MCP3301, MCP3550, MCP3551 and MCP3553 analog to digital converters. This driver can also be built as a module. If so, the module will be called mcp320x. config MCP3422 tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" depends on I2C help Say yes here to build support for Microchip Technology's MCP3421 MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 analog to digital converters. This driver can also be built as a module. If so, the module will be called mcp3422. config MCP3564 tristate "Microchip Technology MCP3461/2/4/R, MCP3561/2/4/R driver" depends on SPI depends on IIO help Say yes here to build support for Microchip Technology's MCP3461, MCP3462, MCP3464, MCP3461R, MCP3462R, MCP3464R, MCP3561, MCP3562, MCP3564, MCP3561R, MCP3562R and MCP3564R analog to digital converters. This driver can also be built as a module. If so, the module will be called mcp3564. config MCP3911 tristate "Microchip Technology MCP3911 driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for one of the following Microchip Technology's analog to digital converters: MCP3910, MCP3911, MCP3912, MCP3913, MCP3914, MCP3918 and MCP3919. This driver can also be built as a module. If so, the module will be called mcp3911. config MEDIATEK_MT6359_AUXADC tristate "MediaTek MT6359 PMIC AUXADC driver" depends on MFD_MT6397 help Say yes here to enable support for MediaTek MT6357, MT6358 and MT6359 PMICs Auxiliary ADC. This driver provides multiple channels for system monitoring, such as battery voltage, PMIC temperature, and others. This driver can also be built as a module. If so, the module will be called mt6359-auxadc. config MEDIATEK_MT6360_ADC tristate "Mediatek MT6360 ADC driver" depends on MFD_MT6360 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say Y here to enable MT6360 ADC support. Integrated for System Monitoring includes is used in smartphones and tablets and supports a 11 channel general purpose ADC. config MEDIATEK_MT6370_ADC tristate "MediaTek MT6370 ADC driver" depends on MFD_MT6370 help Say yes here to enable MediaTek MT6370 ADC support. This ADC driver provides 9 channels for system monitoring (charger current, voltage, and temperature). This driver can also be built as a module. If so, the module will be called "mt6370-adc". config MEDIATEK_MT6577_AUXADC tristate "MediaTek AUXADC driver" depends on ARCH_MEDIATEK || COMPILE_TEST depends on HAS_IOMEM help Say yes here to enable support for MediaTek mt65xx AUXADC. The driver supports immediate mode operation to read from one of sixteen channels (external or internal). This driver can also be built as a module. If so, the module will be called mt6577_auxadc. config MEN_Z188_ADC tristate "MEN 16z188 ADC IP Core support" depends on MCB help Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB carrier. This driver can also be built as a module. If so, the module will be called men_z188_adc. config MESON_SARADC tristate "Amlogic Meson SAR ADC driver" default ARCH_MESON depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) select REGMAP_MMIO help Say yes here to build support for the SAR ADC found in Amlogic Meson SoCs. To compile this driver as a module, choose M here: the module will be called meson_saradc. config MP2629_ADC tristate "Monolithic MP2629 ADC driver" depends on MFD_MP2629 help Say yes to have support for battery charger IC MP2629 ADC device accessed over I2C. This driver provides ADC conversion of system, input power supply and battery voltage & current information. config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C help Say yes here to build support for Nuvoton NAU7802 ADC. To compile this driver as a module, choose M here: the module will be called nau7802. config NPCM_ADC tristate "Nuvoton NPCM ADC driver" depends on ARCH_NPCM || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for Nuvoton NPCM ADC. This driver can also be built as a module. If so, the module will be called npcm_adc. config PAC1921 tristate "Microchip Technology PAC1921 driver" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Microchip Technology's PAC1921 High-Side Power/Current Monitor with Analog Output. This driver can also be built as a module. If so, the module will be called pac1921. config PAC1934 tristate "Microchip Technology PAC1934 driver" depends on I2C help Say yes here to build support for Microchip Technology's PAC1931, PAC1932, PAC1933, PAC1934 Single/Multi-Channel Power Monitor with Accumulator. This driver can also be built as a module. If so, the module will be called pac1934. config PALMAS_GPADC tristate "TI Palmas General Purpose ADC" depends on MFD_PALMAS help Palmas series pmic chip by Texas Instruments (twl6035/6037) is used in smartphones and tablets and supports a 16 channel general purpose ADC. config QCOM_VADC_COMMON tristate config QCOM_PM8XXX_XOADC tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" depends on MFD_PM8XXX select QCOM_VADC_COMMON help ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs using SSBI transport: PM8018, PM8038, PM8058, PM8921. To compile this driver as a module, choose M here: the module will be called qcom-pm8xxx-xoadc. config QCOM_SPMI_RRADC tristate "Qualcomm SPMI RRADC" depends on MFD_SPMI_PMIC help This is for the PMIC Round Robin ADC driver. This driver exposes the battery ID resistor, battery thermal, PMIC die temperature, charger USB in and DC in voltage and current. To compile this driver as a module, choose M here: the module will be called qcom-qpmi-rradc. config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI select REGMAP_SPMI help This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip. The driver supports single mode operation to read from one of two channels (external or internal). Hardware have additional channels internally used for gain and offset calibration. To compile this driver as a module, choose M here: the module will be called qcom-spmi-iadc. config QCOM_SPMI_VADC tristate "Qualcomm SPMI PMIC voltage ADC" depends on SPMI select REGMAP_SPMI select QCOM_VADC_COMMON help This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip. The driver supports multiple channels read. The VADC is a 15-bit sigma-delta ADC. Some of the channels are internally used for calibration. To compile this driver as a module, choose M here: the module will be called qcom-spmi-vadc. config QCOM_SPMI_ADC5 tristate "Qualcomm Technologies Inc. SPMI PMIC5 ADC" depends on SPMI select REGMAP_SPMI select QCOM_VADC_COMMON help This is the IIO Voltage PMIC5 ADC driver for Qualcomm Technologies Inc. The driver supports multiple channels read. The ADC is a 16-bit sigma-delta ADC. The hardware supports calibrated results for conversion requests and clients include reading voltage phone power, on board system thermistors connected to the PMIC ADC, PMIC die temperature, charger temperature, battery current, USB voltage input, voltage signals connected to supported PMIC GPIO inputs. The hardware supports internal pull-up for thermistors and can choose between a 100k, 30k and 400k pull up using the ADC channels. To compile this driver as a module, choose M here: the module will be called qcom-spmi-adc5. config RCAR_GYRO_ADC tristate "Renesas R-Car GyroADC driver" depends on ARCH_RCAR_GEN2 || COMPILE_TEST help Say yes here to build support for the GyroADC found in Renesas R-Car Gen2 SoCs. This block is a simple SPI offload engine for reading data out of attached compatible ADCs in a round-robin fashion. Up to 4 or 8 ADC channels are supported by this block, depending on which ADCs are attached. To compile this driver as a module, choose M here: the module will be called rcar-gyroadc. config RN5T618_ADC tristate "ADC for the RN5T618/RC5T619 family of chips" depends on MFD_RN5T618 help Say yes here to build support for the integrated ADC inside the RN5T618/619 series PMICs: This driver can also be built as a module. If so, the module will be called rn5t618-adc. config ROCKCHIP_SARADC tristate "Rockchip SARADC driver" depends on ARCH_ROCKCHIP || COMPILE_TEST depends on RESET_CONTROLLER select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the SARADC found in SoCs from Rockchip. To compile this driver as a module, choose M here: the module will be called rockchip_saradc. config RICHTEK_RTQ6056 tristate "Richtek RTQ6056 Current and Power Monitor ADC" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to enable RQT6056 ADC support. RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus compatible interface, and the device provides full information for system by reading out the load current and power. This driver can also be built as a module. If so, the module will be called rtq6056. config RZG2L_ADC tristate "Renesas RZ/G2L ADC driver" depends on ARCH_RZG2L || COMPILE_TEST help Say yes here to build support for the ADC found in Renesas RZ/G2L family. To compile this driver as a module, choose M here: the module will be called rzg2l_adc. config SC27XX_ADC tristate "Spreadtrum SC27xx series PMICs ADC" depends on MFD_SC27XX_PMIC || COMPILE_TEST help Say yes here to build support for the integrated ADC inside the Spreadtrum SC27xx series PMICs. This driver can also be built as a module. If so, the module will be called sc27xx_adc. config SOPHGO_CV1800B_ADC tristate "Sophgo CV1800B SARADC" depends on ARCH_SOPHGO || COMPILE_TEST help Say yes here to build support for the SARADC integrated inside the Sophgo CV1800B SoC. This driver can also be built as a module. If so, the module will be called sophgo_cv1800b_adc. config SPEAR_ADC tristate "ST SPEAr ADC" depends on PLAT_SPEAR || COMPILE_TEST depends on HAS_IOMEM help Say yes here to build support for the integrated ADC inside the ST SPEAr SoC. Provides direct access via sysfs. To compile this driver as a module, choose M here: the module will be called spear_adc. config SD_ADC_MODULATOR tristate "Generic sigma delta modulator" select IIO_BUFFER select IIO_TRIGGERED_BUFFER select IIO_BACKEND help Select this option to enables sigma delta modulator. This driver can support generic sigma delta modulators. This driver can also be built as a module. If so, the module will be called sd_adc_modulator. config STM32_ADC_CORE tristate "STMicroelectronics STM32 adc core" depends on ARCH_STM32 || COMPILE_TEST depends on OF depends on REGULATOR depends on HAS_IOMEM select IIO_BUFFER select MFD_STM32_TIMERS select IIO_STM32_TIMER_TRIGGER select IIO_TRIGGERED_BUFFER help Select this option to enable the core driver for STMicroelectronics STM32 analog-to-digital converter (ADC). This driver can also be built as a module. If so, the module will be called stm32-adc-core. config STM32_ADC tristate "STMicroelectronics STM32 adc" depends on STM32_ADC_CORE help Say yes here to build support for STMicroelectronics stm32 Analog to Digital Converter (ADC). This driver can also be built as a module. If so, the module will be called stm32-adc. config STM32_DFSDM_CORE tristate "STMicroelectronics STM32 DFSDM core" depends on (ARCH_STM32 && OF) || COMPILE_TEST select REGMAP select REGMAP_MMIO help Select this option to enable the driver for STMicroelectronics STM32 digital filter for sigma delta converter. This driver can also be built as a module. If so, the module will be called stm32-dfsdm-core. config STM32_DFSDM_ADC tristate "STMicroelectronics STM32 dfsdm adc" depends on (ARCH_STM32 && OF) || COMPILE_TEST select STM32_DFSDM_CORE select REGMAP_MMIO select IIO_BUFFER select IIO_BUFFER_HW_CONSUMER select IIO_TRIGGERED_BUFFER select IIO_BACKEND help Select this option to support ADCSigma delta modulator for STMicroelectronics STM32 digital filter for sigma delta converter. This driver can also be built as a module. If so, the module will be called stm32-dfsdm-adc. config STMPE_ADC tristate "STMicroelectronics STMPE ADC driver" depends on OF && MFD_STMPE help Say yes here to build support for ST Microelectronics STMPE built-in ADC block (stmpe811). config SUN4I_GPADC tristate "Allwinner A10/A13/A31 and similar GPADCs driver" depends on IIO depends on MFD_SUN4I_GPADC || MACH_SUN8I depends on THERMAL || !THERMAL_OF select REGMAP_IRQ help Say yes here to build support for Allwinner (A10, A13 and A31) SoCs GPADC. This ADC provides 4 channels which can be used as an ADC or as a touchscreen input and one channel for thermal sensor. The thermal sensor slows down ADC readings and can be disabled by disabling CONFIG_THERMAL_OF. However, the thermal sensor should be enabled by default since the SoC temperature is usually more critical than ADC readings. To compile this driver as a module, choose M here: the module will be called sun4i-gpadc-iio. config SUN20I_GPADC tristate "Allwinner D1/T113s/T507/R329 and similar GPADCs driver" depends on ARCH_SUNXI || COMPILE_TEST help Say yes here to build support for Allwinner (D1, T113, T507 and R329) SoCs GPADC. This ADC provides up to 16 channels. To compile this driver as a module, choose M here: the module will be called sun20i-gpadc-iio. config TI_ADC081C tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADC081C, ADC101C and ADC121C ADC chips. This driver can also be built as a module. If so, the module will be called ti-adc081c. config TI_ADC0832 tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADC0831, ADC0832, ADC0834, ADC0838 ADC chips. This driver can also be built as a module. If so, the module will be called ti-adc0832. config TI_ADC084S021 tristate "Texas Instruments ADC084S021" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADC084S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc084s021. config TI_ADC12138 tristate "Texas Instruments ADC12130/ADC12132/ADC12138" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADC12130, ADC12132 and ADC12138 chips. This driver can also be built as a module. If so, the module will be called ti-adc12138. config TI_ADC108S102 tristate "Texas Instruments ADC108S102 and ADC128S102 driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Texas Instruments ADC108S102 and ADC128S102 ADC. To compile this driver as a module, choose M here: the module will be called ti-adc108s102. config TI_ADC128S052 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI help If you say yes here you get support for Texas Instruments ADC128S052, ADC122S021 and ADC124S021 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. config TI_ADC161S626 tristate "Texas Instruments ADC161S626 1-channel differential ADC" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADC141S626, and ADC161S626 chips. This driver can also be built as a module. If so, the module will be called ti-adc161s626. config TI_ADS1015 tristate "Texas Instruments ADS1015 ADC" depends on I2C select REGMAP_I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS1015 ADC chip. This driver can also be built as a module. If so, the module will be called ti-ads1015. config TI_ADS1119 tristate "Texas Instruments ADS1119 ADC" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS1119 ADC chip. This driver can also be built as a module. If so, the module will be called ti-ads1119. config TI_ADS7924 tristate "Texas Instruments ADS7924 ADC" depends on I2C select REGMAP_I2C help If you say yes here you get support for Texas Instruments ADS7924 4 channels, 12-bit I2C ADC chip. This driver can also be built as a module. If so, the module will be called ti-ads7924. config TI_ADS1100 tristate "Texas Instruments ADS1100 and ADS1000 ADC" depends on I2C help If you say yes here you get support for Texas Instruments ADS1100 and ADS1000 ADC chips. This driver can also be built as a module. If so, the module will be called ti-ads1100. config TI_ADS1298 tristate "Texas Instruments ADS1298" depends on SPI select IIO_BUFFER help If you say yes here you get support for Texas Instruments ADS1298 medical ADC chips This driver can also be built as a module. If so, the module will be called ti-ads1298. config TI_ADS7950 tristate "Texas Instruments ADS7950 ADC driver" depends on SPI && GPIOLIB select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Texas Instruments ADS7950, ADS7951, ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959. ADS7960, ADS7961. To compile this driver as a module, choose M here: the module will be called ti-ads7950. config TI_ADS8344 tristate "Texas Instruments ADS8344" depends on SPI help If you say yes here you get support for Texas Instruments ADS8344 ADC chips This driver can also be built as a module. If so, the module will be called ti-ads8344. config TI_ADS8688 tristate "Texas Instruments ADS8688" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS8684 and and ADS8688 ADC chips This driver can also be built as a module. If so, the module will be called ti-ads8688. config TI_ADS124S08 tristate "Texas Instruments ADS124S08" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS124S08 and ADS124S06 ADC chips This driver can also be built as a module. If so, the module will be called ti-ads124s08. config TI_ADS131E08 tristate "Texas Instruments ADS131E08" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to get support for Texas Instruments ADS131E04, ADS131E06 and ADS131E08 chips. This driver can also be built as a module. If so, the module will be called ti-ads131e08. config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC && HAS_DMA select IIO_BUFFER select IIO_KFIFO_BUF help Say yes here to build support for Texas Instruments ADC driver which is also a MFD client. To compile this driver as a module, choose M here: the module will be called ti_am335x_adc. config TI_LMP92064 tristate "Texas Instruments LMP92064 ADC driver" depends on SPI select REGMAP_SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for the LMP92064 Precision Current and Voltage sensor. This driver can also be built as a module. If so, the module will be called ti-lmp92064. config TI_TLC4541 tristate "Texas Instruments TLC4541 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for Texas Instruments TLC4541 / TLC3541 ADC chips. This driver can also be built as a module. If so, the module will be called ti-tlc4541. config TI_TSC2046 tristate "Texas Instruments TSC2046 ADC driver" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to build support for ADC functionality of Texas Instruments TSC2046 touch screen controller. This driver can also be built as a module. If so, the module will be called ti-tsc2046. config TWL4030_MADC tristate "TWL4030 MADC (Monitoring A/D Converter)" depends on TWL4030_CORE help This driver provides support for Triton TWL4030-MADC. The driver supports both RT and SW conversion methods. This driver can also be built as a module. If so, the module will be called twl4030-madc. config TWL6030_GPADC tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" depends on TWL4030_CORE help Say yes here if you want support for the TWL6030/TWL6032 General Purpose A/D Converter. This will add support for battery type detection, battery voltage and temperature measurement, die temperature measurement, system supply voltage, audio accessory, USB ID detection. This driver can also be built as a module. If so, the module will be called twl6030-gpadc. config VF610_ADC tristate "Freescale vf610 ADC driver" depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to support for Vybrid board analog-to-digital converter. Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX. This driver can also be built as a module. If so, the module will be called vf610_adc. config VIPERBOARD_ADC tristate "Viperboard ADC support" depends on MFD_VIPERBOARD && USB help Say yes here to access the ADC part of the Nano River Technologies Viperboard. To compile this driver as a module, choose M here: the module will be called viperboard_adc. config XILINX_XADC tristate "Xilinx XADC driver" depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER help Say yes here to have support for the Xilinx 7 Series XADC or UltraScale/UltraScale+ System Management Wizard. For the 7 Series the driver does support both the ZYNQ interface to the XADC as well as the AXI-XADC interface. The driver also support the Xilinx System Management Wizard IP core that can be used to access the System Monitor ADC on the Xilinx UltraScale and UltraScale+ FPGAs. The driver can also be build as a module. If so, the module will be called xilinx-xadc. config XILINX_AMS tristate "Xilinx AMS driver" depends on ARCH_ZYNQMP || COMPILE_TEST depends on HAS_IOMEM help Say yes here to have support for the Xilinx AMS for Ultrascale/Ultrascale+ System Monitor. With this you can measure and monitor the Voltages and Temperature values on the SOC. The driver supports Voltage and Temperature monitoring on Xilinx Ultrascale devices. The driver can also be built as a module. If so, the module will be called xilinx-ams. endmenu