// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2005, Intec Automation Inc.
 * Copyright (C) 2014, Freescale Semiconductor, Inc.
 */

#include <linux/mtd/spi-nor.h>

#include "core.h"

#define MXIC_NOR_OP_RD_CR2	0x71		/* Read configuration register 2 opcode */
#define MXIC_NOR_OP_WR_CR2	0x72		/* Write configuration register 2 opcode */
#define MXIC_NOR_ADDR_CR2_MODE	0x00000000	/* CR2 address for setting spi/sopi/dopi mode */
#define MXIC_NOR_ADDR_CR2_DC	0x00000300	/* CR2 address for setting dummy cycles */
#define MXIC_NOR_REG_DOPI_EN	0x2		/* Enable Octal DTR */
#define MXIC_NOR_REG_SPI_EN	0x0		/* Enable SPI */

/* Convert dummy cycles to bit pattern */
#define MXIC_NOR_REG_DC(p) \
	((20 - (p)) >> 1)

#define MXIC_NOR_WR_CR2(addr, ndata, buf)			\
	SPI_MEM_OP(SPI_MEM_OP_CMD(MXIC_NOR_OP_WR_CR2, 0),	\
		   SPI_MEM_OP_ADDR(4, addr, 0),			\
		   SPI_MEM_OP_NO_DUMMY,				\
		   SPI_MEM_OP_DATA_OUT(ndata, buf, 0))

static int
mx25l25635_post_bfpt_fixups(struct spi_nor *nor,
			    const struct sfdp_parameter_header *bfpt_header,
			    const struct sfdp_bfpt *bfpt)
{
	/*
	 * MX25L25635F supports 4B opcodes but MX25L25635E does not.
	 * Unfortunately, Macronix has re-used the same JEDEC ID for both
	 * variants which prevents us from defining a new entry in the parts
	 * table.
	 * We need a way to differentiate MX25L25635E and MX25L25635F, and it
	 * seems that the F version advertises support for Fast Read 4-4-4 in
	 * its BFPT table.
	 */
	if (bfpt->dwords[SFDP_DWORD(5)] & BFPT_DWORD5_FAST_READ_4_4_4)
		nor->flags |= SNOR_F_4B_OPCODES;

	return 0;
}

static const struct spi_nor_fixups mx25l25635_fixups = {
	.post_bfpt = mx25l25635_post_bfpt_fixups,
};

static const struct flash_info macronix_nor_parts[] = {
	{
		.id = SNOR_ID(0xc2, 0x20, 0x10),
		.name = "mx25l512e",
		.size = SZ_64K,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x12),
		.name = "mx25l2005a",
		.size = SZ_256K,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x13),
		.name = "mx25l4005a",
		.size = SZ_512K,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x14),
		.name = "mx25l8005",
		.size = SZ_1M,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x15),
		.name = "mx25l1606e",
		.size = SZ_2M,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x16),
		.name = "mx25l3205d",
		.size = SZ_4M,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x17),
		.name = "mx25l6405d",
		.size = SZ_8M,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x18),
		.name = "mx25l12805d",
		.size = SZ_16M,
		.flags = SPI_NOR_HAS_LOCK | SPI_NOR_4BIT_BP,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x19),
		.name = "mx25l25635e",
		.size = SZ_32M,
		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
		.fixups = &mx25l25635_fixups
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x1a),
		.name = "mx66l51235f",
		.size = SZ_64M,
		.no_sfdp_flags = SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
		.fixup_flags = SPI_NOR_4B_OPCODES,
	}, {
		.id = SNOR_ID(0xc2, 0x20, 0x1b),
		.name = "mx66l1g45g",
		.size = SZ_128M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x23, 0x14),
		.name = "mx25v8035f",
		.size = SZ_1M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x32),
		.name = "mx25u2033e",
		.size = SZ_256K,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x33),
		.name = "mx25u4035",
		.size = SZ_512K,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x34),
		.name = "mx25u8035",
		.size = SZ_1M,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x36),
		.name = "mx25u3235f",
		.size = SZ_4M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x37),
		.name = "mx25u6435f",
		.size = SZ_8M,
		.no_sfdp_flags = SECT_4K,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x38),
		.name = "mx25u12835f",
		.size = SZ_16M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x39),
		.name = "mx25u25635f",
		.size = SZ_32M,
		.no_sfdp_flags = SECT_4K,
		.fixup_flags = SPI_NOR_4B_OPCODES,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x3a),
		.name = "mx25u51245g",
		.size = SZ_64M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
		.fixup_flags = SPI_NOR_4B_OPCODES,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x3a),
		.name = "mx66u51235f",
		.size = SZ_64M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
		.fixup_flags = SPI_NOR_4B_OPCODES,
	}, {
		.id = SNOR_ID(0xc2, 0x25, 0x3c),
		.name = "mx66u2g45g",
		.size = SZ_256M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
		.fixup_flags = SPI_NOR_4B_OPCODES,
	}, {
		.id = SNOR_ID(0xc2, 0x26, 0x18),
		.name = "mx25l12855e",
		.size = SZ_16M,
	}, {
		.id = SNOR_ID(0xc2, 0x26, 0x19),
		.name = "mx25l25655e",
		.size = SZ_32M,
	}, {
		.id = SNOR_ID(0xc2, 0x26, 0x1b),
		.name = "mx66l1g55g",
		.size = SZ_128M,
		.no_sfdp_flags = SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x28, 0x15),
		.name = "mx25r1635f",
		.size = SZ_2M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x28, 0x16),
		.name = "mx25r3235f",
		.size = SZ_4M,
		.no_sfdp_flags = SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ,
	}, {
		.id = SNOR_ID(0xc2, 0x81, 0x3a),
		.name = "mx25uw51245g",
		.n_banks = 4,
		.flags = SPI_NOR_RWW,
	}, {
		.id = SNOR_ID(0xc2, 0x9e, 0x16),
		.name = "mx25l3255e",
		.size = SZ_4M,
		.no_sfdp_flags = SECT_4K,
	},
	/*
	 * This spares us of adding new flash entries for flashes that can be
	 * initialized solely based on the SFDP data, but still need the
	 * manufacturer hooks to set parameters that can't be discovered at SFDP
	 * parsing time.
	 */
	{ .id = SNOR_ID(0xc2) }
};

static int macronix_nor_octal_dtr_en(struct spi_nor *nor)
{
	struct spi_mem_op op;
	u8 *buf = nor->bouncebuf, i;
	int ret;

	/* Use dummy cycles which is parse by SFDP and convert to bit pattern. */
	buf[0] = MXIC_NOR_REG_DC(nor->params->reads[SNOR_CMD_READ_8_8_8_DTR].num_wait_states);
	op = (struct spi_mem_op)MXIC_NOR_WR_CR2(MXIC_NOR_ADDR_CR2_DC, 1, buf);
	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
	if (ret)
		return ret;

	/* Set the octal and DTR enable bits. */
	buf[0] = MXIC_NOR_REG_DOPI_EN;
	op = (struct spi_mem_op)MXIC_NOR_WR_CR2(MXIC_NOR_ADDR_CR2_MODE, 1, buf);
	ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto);
	if (ret)
		return ret;

	/* Read flash ID to make sure the switch was successful. */
	ret = spi_nor_read_id(nor, 4, 4, buf, SNOR_PROTO_8_8_8_DTR);
	if (ret) {
		dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret);
		return ret;
	}

	/* Macronix SPI-NOR flash 8D-8D-8D read ID would get 6 bytes data A-A-B-B-C-C */
	for (i = 0; i < nor->info->id->len; i++)
		if (buf[i * 2] != buf[(i * 2) + 1] || buf[i * 2] != nor->info->id->bytes[i])
			return -EINVAL;

	return 0;
}

static int macronix_nor_octal_dtr_dis(struct spi_nor *nor)
{
	struct spi_mem_op op;
	u8 *buf = nor->bouncebuf;
	int ret;

	/*
	 * The register is 1-byte wide, but 1-byte transactions are not
	 * allowed in 8D-8D-8D mode. Since there is no register at the
	 * next location, just initialize the value to 0 and let the
	 * transaction go on.
	 */
	buf[0] = MXIC_NOR_REG_SPI_EN;
	buf[1] = 0x0;
	op = (struct spi_mem_op)MXIC_NOR_WR_CR2(MXIC_NOR_ADDR_CR2_MODE, 2, buf);
	ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR);
	if (ret)
		return ret;

	/* Read flash ID to make sure the switch was successful. */
	ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1);
	if (ret) {
		dev_dbg(nor->dev, "error %d reading JEDEC ID after disabling 8D-8D-8D mode\n", ret);
		return ret;
	}

	if (memcmp(buf, nor->info->id->bytes, nor->info->id->len))
		return -EINVAL;

	return 0;
}

static int macronix_nor_set_octal_dtr(struct spi_nor *nor, bool enable)
{
	return enable ? macronix_nor_octal_dtr_en(nor) : macronix_nor_octal_dtr_dis(nor);
}

static void macronix_nor_default_init(struct spi_nor *nor)
{
	nor->params->quad_enable = spi_nor_sr1_bit6_quad_enable;
}

static int macronix_nor_late_init(struct spi_nor *nor)
{
	if (!nor->params->set_4byte_addr_mode)
		nor->params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_en4b_ex4b;
	nor->params->set_octal_dtr = macronix_nor_set_octal_dtr;

	return 0;
}

static const struct spi_nor_fixups macronix_nor_fixups = {
	.default_init = macronix_nor_default_init,
	.late_init = macronix_nor_late_init,
};

const struct spi_nor_manufacturer spi_nor_macronix = {
	.name = "macronix",
	.parts = macronix_nor_parts,
	.nparts = ARRAY_SIZE(macronix_nor_parts),
	.fixups = &macronix_nor_fixups,
};