1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
|
# SPDX-License-Identifier: GPL-2.0-only
# Copyright (C) 2020 Renesas Electronics Corp.
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/renesas,vin.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Renesas R-Car Video Input (VIN)
maintainers:
- Niklas Söderlund <niklas.soderlund@ragnatech.se>
description:
The R-Car Video Input (VIN) device provides video input capabilities for the
Renesas R-Car family of devices.
Each VIN instance has a single parallel input that supports RGB and YUV video,
with both external synchronization and BT.656 synchronization for the latter.
Depending on the instance the VIN input is connected to external SoC pins, or
on Gen3 and RZ/G2 platforms to a CSI-2 receiver.
properties:
compatible:
oneOf:
- items:
- enum:
- renesas,vin-r8a7743 # RZ/G1M
- renesas,vin-r8a7744 # RZ/G1N
- renesas,vin-r8a7745 # RZ/G1E
- renesas,vin-r8a77470 # RZ/G1C
- renesas,vin-r8a7790 # R-Car H2
- renesas,vin-r8a7791 # R-Car M2-W
- renesas,vin-r8a7792 # R-Car V2H
- renesas,vin-r8a7793 # R-Car M2-N
- renesas,vin-r8a7794 # R-Car E2
- const: renesas,rcar-gen2-vin # Generic R-Car Gen2 or RZ/G1
- items:
- enum:
- renesas,vin-r8a774a1 # RZ/G2M
- renesas,vin-r8a774b1 # RZ/G2N
- renesas,vin-r8a774c0 # RZ/G2E
- renesas,vin-r8a7778 # R-Car M1
- renesas,vin-r8a7779 # R-Car H1
- renesas,vin-r8a7795 # R-Car H3
- renesas,vin-r8a7796 # R-Car M3-W
- renesas,vin-r8a77965 # R-Car M3-N
- renesas,vin-r8a77970 # R-Car V3M
- renesas,vin-r8a77980 # R-Car V3H
- renesas,vin-r8a77990 # R-Car E3
- renesas,vin-r8a77995 # R-Car D3
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
maxItems: 1
power-domains:
maxItems: 1
resets:
maxItems: 1
#The per-board settings for Gen2 and RZ/G1 platforms:
port:
type: object
description:
A node containing a parallel input with a single endpoint definitions as
documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
endpoint:
type: object
properties:
hsync-active:
description:
If both HSYNC and VSYNC polarities are not specified, embedded
synchronization is selected.
default: 1
vsync-active:
description:
If both HSYNC and VSYNC polarities are not specified, embedded
synchronization is selected.
default: 1
field-active-even: true
bus-width: true
data-shift: true
data-enable-active:
description: Polarity of CLKENB signal
default: 1
pclk-sample: true
data-active: true
remote-endpoint: true
required:
- remote-endpoint
additionalProperties: false
additionalProperties: false
#The per-board settings for Gen3 and RZ/G2 platforms:
renesas,id:
description: VIN channel number
$ref: /schemas/types.yaml#/definitions/uint32
minimum: 0
maximum: 15
ports:
type: object
description:
A node containing input nodes with endpoint definitions as documented in
Documentation/devicetree/bindings/media/video-interfaces.txt
properties:
port@0:
type: object
description:
Input port node, single endpoint describing a parallel input source.
properties:
reg:
const: 0
endpoint:
type: object
properties:
hsync-active:
description:
If both HSYNC and VSYNC polarities are not specified, embedded
synchronization is selected.
default: 1
vsync-active:
description:
If both HSYNC and VSYNC polarities are not specified, embedded
synchronization is selected.
default: 1
field-active-even: true
bus-width: true
data-shift: true
data-enable-active:
description: Polarity of CLKENB signal
default: 1
pclk-sample: true
data-active: true
remote-endpoint: true
required:
- remote-endpoint
additionalProperties: false
required:
- endpoint
additionalProperties: false
port@1:
type: object
description:
Input port node, multiple endpoints describing all the R-Car CSI-2
modules connected the VIN.
properties:
'#address-cells':
const: 1
'#size-cells':
const: 0
reg:
const: 1
endpoint@0:
type: object
description: Endpoint connected to CSI20.
properties:
reg:
const: 0
remote-endpoint: true
required:
- reg
- remote-endpoint
additionalProperties: false
endpoint@1:
type: object
description: Endpoint connected to CSI21.
properties:
reg:
const: 1
remote-endpoint: true
required:
- reg
- remote-endpoint
additionalProperties: false
endpoint@2:
type: object
description: Endpoint connected to CSI40.
properties:
reg:
const: 2
remote-endpoint: true
required:
- reg
- remote-endpoint
additionalProperties: false
endpoint@3:
type: object
description: Endpoint connected to CSI41.
properties:
reg:
const: 3
remote-endpoint: true
required:
- reg
- remote-endpoint
additionalProperties: false
anyOf:
- required:
- endpoint@0
- required:
- endpoint@1
- required:
- endpoint@2
- required:
- endpoint@3
additionalProperties: false
required:
- compatible
- reg
- interrupts
- clocks
- power-domains
- resets
if:
properties:
compatible:
contains:
enum:
- renesas,vin-r8a7778
- renesas,vin-r8a7779
- renesas,rcar-gen2-vin
then:
required:
- port
else:
required:
- renesas,id
- ports
additionalProperties: false
examples:
# Device node example for Gen2 platform
- |
#include <dt-bindings/clock/r8a7790-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7790-sysc.h>
vin1: vin@e6ef1000 {
compatible = "renesas,vin-r8a7790",
"renesas,rcar-gen2-vin";
reg = <0xe6ef1000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 810>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 810>;
port {
vin1ep0: endpoint {
remote-endpoint = <&adv7180>;
bus-width = <8>;
};
};
};
# Device node example for Gen3 platform with only CSI-2
- |
#include <dt-bindings/clock/r8a7795-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a7795-sysc.h>
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7795";
reg = <0xe6ef0000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 811>;
power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
resets = <&cpg 811>;
renesas,id = <0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
vin0csi20: endpoint@0 {
reg = <0>;
remote-endpoint= <&csi20vin0>;
};
vin0csi40: endpoint@2 {
reg = <2>;
remote-endpoint= <&csi40vin0>;
};
};
};
};
# Device node example for Gen3 platform with CSI-2 and parallel
- |
#include <dt-bindings/clock/r8a77970-cpg-mssr.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/power/r8a77970-sysc.h>
vin2: video@e6ef2000 {
compatible = "renesas,vin-r8a77970";
reg = <0xe6ef2000 0x1000>;
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 809>;
power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
resets = <&cpg 809>;
renesas,id = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
vin2_in: endpoint {
remote-endpoint = <&adv7612_out>;
hsync-active = <0>;
vsync-active = <0>;
};
};
port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
vin2csi40: endpoint@2 {
reg = <2>;
remote-endpoint = <&csi40vin2>;
};
};
};
};
|
