1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
|
Qualcomm Hexagon Peripheral Image Loader
This document defines the binding for a component that loads and boots firmware
on the Qualcomm Hexagon core.
- compatible:
Usage: required
Value type: <string>
Definition: must be one of:
"qcom,q6v5-pil",
"qcom,ipq8074-wcss-pil"
"qcom,msm8916-mss-pil",
"qcom,msm8974-mss-pil"
"qcom,msm8996-mss-pil"
"qcom,msm8998-mss-pil"
"qcom,sc7180-mss-pil"
"qcom,sdm845-mss-pil"
- reg:
Usage: required
Value type: <prop-encoded-array>
Definition: must specify the base address and size of the qdsp6 and
rmb register blocks
- reg-names:
Usage: required
Value type: <stringlist>
Definition: must be "q6dsp" and "rmb"
- interrupts-extended:
Usage: required
Value type: <prop-encoded-array>
Definition: reference to the interrupts that match interrupt-names
- interrupt-names:
Usage: required
Value type: <stringlist>
Definition: The interrupts needed depends on the the compatible
string:
qcom,q6v5-pil:
qcom,ipq8074-wcss-pil:
qcom,msm8916-mss-pil:
qcom,msm8974-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack"
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "wdog", "fatal", "ready", "handover", "stop-ack",
"shutdown-ack"
- firmware-name:
Usage: optional
Value type: <stringlist>
Definition: must list the relative firmware image paths for mba and
modem. They are used for booting and authenticating the
Hexagon core.
- clocks:
Usage: required
Value type: <phandle>
Definition: reference to the clocks that match clock-names
- clock-names:
Usage: required
Value type: <stringlist>
Definition: The clocks needed depend on the compatible string:
qcom,ipq8074-wcss-pil:
no clock names required
qcom,q6v5-pil:
qcom,msm8916-mss-pil:
qcom,msm8974-mss-pil:
must be "iface", "bus", "mem", "xo"
qcom,msm8996-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "pnoc", "qdss"
qcom,msm8998-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "qdss"
qcom,sc7180-mss-pil:
must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
"nav"
qcom,sdm845-mss-pil:
must be "iface", "bus", "mem", "xo", "gpll0_mss",
"snoc_axi", "mnoc_axi", "prng"
- resets:
Usage: required
Value type: <phandle>
Definition: reference to the reset-controller for the modem sub-system
reference to the list of 3 reset-controllers for the
wcss sub-system
reference to the list of 2 reset-controllers for the modem
sub-system on SC7180, SDM845 SoCs
- reset-names:
Usage: required
Value type: <stringlist>
Definition: must be "mss_restart" for the modem sub-system
must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
for the wcss sub-system
must be "mss_restart", "pdc_reset" for the modem
sub-system on SC7180, SDM845 SoCs
For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
should be referenced as follows:
- memory-region:
Usage: required
Value type: <phandle>
Definition: reference to the reserved-memory for the mba region followed
by the mpss region
For the compatible strings below the following supplies are required:
"qcom,q6v5-pil"
"qcom,msm8916-mss-pil",
- cx-supply: (deprecated, use power domain instead)
- mx-supply: (deprecated, use power domain instead)
- pll-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the Hexagon core
For the compatible string below the following supplies are required:
"qcom,msm8974-mss-pil"
- cx-supply: (deprecated, use power domain instead)
- mss-supply:
- mx-supply: (deprecated, use power domain instead)
- pll-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the Hexagon core
For the compatible string below the following supplies are required:
"qcom,msm8996-mss-pil"
- pll-supply:
Usage: required
Value type: <phandle>
Definition: reference to the regulators to be held on behalf of the
booting of the Hexagon core
- power-domains:
Usage: required
Value type: <phandle>
Definition: reference to power-domains that match power-domain-names
- power-domain-names:
Usage: required
Value type: <stringlist>
Definition: The power-domains needed depend on the compatible string:
qcom,ipq8074-wcss-pil:
no power-domain names required
qcom,q6v5-pil:
qcom,msm8916-mss-pil:
qcom,msm8974-mss-pil:
qcom,msm8996-mss-pil:
qcom,msm8998-mss-pil:
must be "cx", "mx"
qcom,sc7180-mss-pil:
qcom,sdm845-mss-pil:
must be "cx", "mx", "mss", "load_state"
- qcom,smem-states:
Usage: required
Value type: <phandle>
Definition: reference to the smem state for requesting the Hexagon to
shut down
- qcom,smem-state-names:
Usage: required
Value type: <stringlist>
Definition: must be "stop"
- qcom,halt-regs:
Usage: required
Value type: <prop-encoded-array>
Definition: a phandle reference to a syscon representing TCSR followed
by the three offsets within syscon for q6, modem and nc
halt registers.
For the compatible strings below the following phandle references are required:
"qcom,sc7180-mss-pil"
- qcom,spare-regs:
Usage: required
Value type: <prop-encoded-array>
Definition: a phandle reference to a syscon representing TCSR followed
by the offset within syscon for conn_box_spare0 register
used by the modem sub-system running on SC7180 SoC.
The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
on platforms which do not have TrustZone.
= SUBNODES:
The Hexagon node must contain two subnodes, named "mba" and "mpss" representing
the memory regions used by the Hexagon firmware. Each sub-node must contain:
- memory-region:
Usage: required
Value type: <phandle>
Definition: reference to the reserved-memory for the region
The Hexagon node may also have an subnode named either "smd-edge" or
"glink-edge" that describes the communication edge, channels and devices
related to the Hexagon. See ../soc/qcom/qcom,smd.txt and
../soc/qcom/qcom,glink.txt for details on how to describe these.
= EXAMPLE
The following example describes the resources needed to boot control the
Hexagon, as it is found on MSM8974 boards.
modem-rproc@fc880000 {
compatible = "qcom,q6v5-pil";
reg = <0xfc880000 0x100>,
<0xfc820000 0x020>;
reg-names = "qdsp6", "rmb";
interrupts-extended = <&intc 0 24 1>,
<&modem_smp2p_in 0 0>,
<&modem_smp2p_in 1 0>,
<&modem_smp2p_in 2 0>,
<&modem_smp2p_in 3 0>;
interrupt-names = "wdog",
"fatal",
"ready",
"handover",
"stop-ack";
clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
<&gcc GCC_MSS_CFG_AHB_CLK>,
<&gcc GCC_BOOT_ROM_AHB_CLK>;
clock-names = "iface", "bus", "mem";
qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
resets = <&gcc GCC_MSS_RESTART>;
reset-names = "mss_restart";
cx-supply = <&pm8841_s2>;
mss-supply = <&pm8841_s3>;
mx-supply = <&pm8841_s1>;
pll-supply = <&pm8941_l12>;
qcom,smem-states = <&modem_smp2p_out 0>;
qcom,smem-state-names = "stop";
mba {
memory-region = <&mba_region>;
};
mpss {
memory-region = <&mpss_region>;
};
};
|
