summaryrefslogtreecommitdiff
path: root/default-conf/asterisk/extensions.conf
diff options
context:
space:
mode:
authorPhilip Häusler <msquare@notrademark.de>2011-06-11 18:10:20 +0200
committerPhilip Häusler <msquare@notrademark.de>2011-06-11 18:10:20 +0200
commit49a20487e74aaa2fa17784c6c9d5a6179393e07c (patch)
tree3ace8aa439becc53f7187367a425ab3be1099169 /default-conf/asterisk/extensions.conf
parent946c230e6f8e04c7dd8f92ca3190a51ac220f0ca (diff)
move default-config to install dir
Diffstat (limited to 'default-conf/asterisk/extensions.conf')
-rw-r--r--default-conf/asterisk/extensions.conf160
1 files changed, 0 insertions, 160 deletions
diff --git a/default-conf/asterisk/extensions.conf b/default-conf/asterisk/extensions.conf
deleted file mode 100644
index 54058e9d..00000000
--- a/default-conf/asterisk/extensions.conf
+++ /dev/null
@@ -1,160 +0,0 @@
-;
-; Static extension configuration file, used by
-; the pbx_config module. This is where you configure all your
-; inbound and outbound calls in Asterisk.
-;
-; This configuration file is reloaded
-; - With the "extensions reload" command in the CLI
-; - With the "reload" command (that reloads everything) in the CLI
-
-;
-; The "General" category is for certain variables.
-;
-[general]
-;
-; If static is set to no, or omitted, then the pbx_config will rewrite
-; this file when extensions are modified. Remember that all comments
-; made in the file will be lost when that happens.
-;
-; XXX Not yet implemented XXX
-;
-static=yes
-;
-; if static=yes and writeprotect=no, you can save dialplan by
-; CLI command 'save dialplan' too
-;
-writeprotect=no
-;
-; If autofallthrough is set, then if an extension runs out of
-; things to do, it will terminate the call with BUSY, CONGESTION
-; or HANGUP depending on Asterisk's best guess (strongly recommended).
-;
-; If autofallthrough is not set, then if an extension runs out of
-; things to do, asterisk will wait for a new extension to be dialed
-; (this is the original behavior of Asterisk 1.0 and earlier).
-;
-autofallthrough=yes
-;
-; If clearglobalvars is set, global variables will be cleared
-; and reparsed on an extensions reload, or Asterisk reload.
-;
-; If clearglobalvars is not set, then global variables will persist
-; through reloads, and even if deleted from the extensions.conf or
-; one of its included files, will remain set to the previous value.
-;
-clearglobalvars=no
-;
-; If priorityjumping is set to 'yes', then applications that support
-; 'jumping' to a different priority based on the result of their operations
-; will do so (this is backwards compatible behavior with pre-1.2 releases
-; of Asterisk). Individual applications can also be requested to do this
-; by passing a 'j' option in their arguments.
-;
-priorityjumping=no
-;
-; You can include other config files, use the #include command
-; (without the ';'). Note that this is different from the "include" command
-; that includes contexts within other contexts. The #include command works
-; in all asterisk configuration files.
-;#include "filename.conf"
-
-; The "Globals" category contains global variables that can be referenced
-; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
-; variables,
-; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
-;
-[globals]
-CONSOLE=Console/dsp ; Console interface for demo
-;CONSOLE=Zap/1
-;CONSOLE=Phone/phone0
-IAXINFO=guest ; IAXtel username/password
-;IAXINFO=myuser:mypass
-TRUNK=Zap/g2 ; Trunk interface
-;
-; Note the 'g2' in the TRUNK variable above. It specifies which group (defined
-; in zapata.conf) to dial, i.e. group 2, and how to choose a channel to use in
-; the specified group. The four possible options are:
-;
-; g: select the lowest-numbered non-busy Zap channel
-; (aka. ascending sequential hunt group).
-; G: select the highest-numbered non-busy Zap channel
-; (aka. descending sequential hunt group).
-; r: use a round-robin search, starting at the next highest channel than last
-; time (aka. ascending rotary hunt group).
-; R: use a round-robin search, starting at the next lowest channel than last
-; time (aka. descending rotary hunt group).
-;
-TRUNKMSD=1 ; MSD digits to strip (usually 1 or 0)
-;TRUNK=IAX2/user:pass@provider
-
-;
-; Any category other than "General" and "Globals" represent
-; extension contexts, which are collections of extensions.
-;
-; Extension names may be numbers, letters, or combinations
-; thereof. If an extension name is prefixed by a '_'
-; character, it is interpreted as a pattern rather than a
-; literal. In patterns, some characters have special meanings:
-;
-; X - any digit from 0-9
-; Z - any digit from 1-9
-; N - any digit from 2-9
-; [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9)
-; . - wildcard, matches anything remaining (e.g. _9011. matches
-; anything starting with 9011 excluding 9011 itself)
-; ! - wildcard, causes the matching process to complete as soon as
-; it can unambiguously determine that no other matches are possible
-;
-; For example the extension _NXXXXXX would match normal 7 digit dialings,
-; while _1NXXNXXXXXX would represent an area code plus phone number
-; preceded by a one.
-;
-; Each step of an extension is ordered by priority, which must
-; always start with 1 to be considered a valid extension. The priority
-; "next" or "n" means the previous priority plus one, regardless of whether
-; the previous priority was associated with the current extension or not.
-; The priority "same" or "s" means the same as the previously specified
-; priority, again regardless of whether the previous entry was for the
-; same extension. Priorities may be immediately followed by a plus sign
-; and another integer to add that amount (most useful with 's' or 'n').
-; Priorities may then also have an alias, or label, in
-; parenthesis after their name which can be used in goto situations
-;
-; Contexts contain several lines, one for each step of each
-; extension, which can take one of two forms as listed below,
-; with the first form being preferred. One may include another
-; context in the current one as well, optionally with a
-; date and time. Included contexts are included in the order
-; they are listed.
-;
-;[context]
-;exten => someexten,priority[+offset][(alias)],application(arg1,arg2,...)
-;exten => someexten,priority[+offset][(alias)],application,arg1|arg2...
-;
-; Timing list for includes is
-;
-; <time range>|<days of week>|<days of month>|<months>
-;
-;include => daytime|9:00-17:00|mon-fri|*|*
-;
-; ignorepat can be used to instruct drivers to not cancel dialtone upon
-; receipt of a particular pattern. The most commonly used example is
-; of course '9' like this:
-;
-;ignorepat => 9
-;
-; so that dialtone remains even after dialing a 9.
-;
-
-[Engelsystem]
-
-[default]
-;exten => s,1,Playback(demo-abouttotry);
-;exten => s,1,Dial(SIP/1023@camp.eventphone.de);
-exten => s,1,Answer;
-exten => s,2,Playback(beep);
-exten => s,3,Festival(${msg});
-exten => s,4,Playback(beep);
-exten => s,5,Festival(${msg});
-exten => s,6,Hangup;
-