move default-config to install dir

10 files changed, 354 insertions, 0 deletions

diff --git a/install/default-conf/asterisk/extensions.conf b/install/default-conf/asterisk/extensions.conf
new file mode 100644
index 00000000..54058e9d
--- /dev/null
+++ b/install/default-conf/asterisk/extensions.conf
@@ -0,0 +1,160 @@
+;
+; Static extension configuration file, used by
+; the pbx_config module. This is where you configure all your 
+; inbound and outbound calls in Asterisk. 
+; 
+; This configuration file is reloaded 
+; - With the "extensions reload" command in the CLI
+; - With the "reload" command (that reloads everything) in the CLI
+
+;
+; The "General" category is for certain variables.  
+;
+[general]
+;
+; If static is set to no, or omitted, then the pbx_config will rewrite
+; this file when extensions are modified.  Remember that all comments
+; made in the file will be lost when that happens. 
+;
+; XXX Not yet implemented XXX
+;
+static=yes
+;
+; if static=yes and writeprotect=no, you can save dialplan by
+; CLI command 'save dialplan' too
+;
+writeprotect=no
+;
+; If autofallthrough is set, then if an extension runs out of
+; things to do, it will terminate the call with BUSY, CONGESTION
+; or HANGUP depending on Asterisk's best guess (strongly recommended).
+;
+; If autofallthrough is not set, then if an extension runs out of 
+; things to do, asterisk will wait for a new extension to be dialed 
+; (this is the original behavior of Asterisk 1.0 and earlier).
+;
+autofallthrough=yes
+;
+; If clearglobalvars is set, global variables will be cleared 
+; and reparsed on an extensions reload, or Asterisk reload.
+;
+; If clearglobalvars is not set, then global variables will persist
+; through reloads, and even if deleted from the extensions.conf or
+; one of its included files, will remain set to the previous value.
+;
+clearglobalvars=no
+;
+; If priorityjumping is set to 'yes', then applications that support
+; 'jumping' to a different priority based on the result of their operations
+; will do so (this is backwards compatible behavior with pre-1.2 releases
+; of Asterisk). Individual applications can also be requested to do this
+; by passing a 'j' option in their arguments.
+;
+priorityjumping=no
+;
+; You can include other config files, use the #include command
+; (without the ';'). Note that this is different from the "include" command
+; that includes contexts within other contexts. The #include command works
+; in all asterisk configuration files.
+;#include "filename.conf"
+
+; The "Globals" category contains global variables that can be referenced
+; in the dialplan with ${VARIABLE} or ${ENV(VARIABLE)} for Environmental
+; variables,
+; ${${VARIABLE}} or ${text${VARIABLE}} or any hybrid
+;
+[globals]
+CONSOLE=Console/dsp				; Console interface for demo
+;CONSOLE=Zap/1
+;CONSOLE=Phone/phone0
+IAXINFO=guest					; IAXtel username/password
+;IAXINFO=myuser:mypass
+TRUNK=Zap/g2					; Trunk interface
+;
+; Note the 'g2' in the TRUNK variable above. It specifies which group (defined
+; in zapata.conf) to dial, i.e. group 2, and how to choose a channel to use in
+; the specified group. The four possible options are:
+;
+; g: select the lowest-numbered non-busy Zap channel
+;    (aka. ascending sequential hunt group).
+; G: select the highest-numbered non-busy Zap channel
+;    (aka. descending sequential hunt group).
+; r: use a round-robin search, starting at the next highest channel than last
+;    time (aka. ascending rotary hunt group).
+; R: use a round-robin search, starting at the next lowest channel than last
+;    time (aka. descending rotary hunt group).
+;
+TRUNKMSD=1					; MSD digits to strip (usually 1 or 0)
+;TRUNK=IAX2/user:pass@provider
+
+;
+; Any category other than "General" and "Globals" represent 
+; extension contexts, which are collections of extensions.  
+;
+; Extension names may be numbers, letters, or combinations
+; thereof. If an extension name is prefixed by a '_'
+; character, it is interpreted as a pattern rather than a
+; literal.  In patterns, some characters have special meanings:
+;
+;   X - any digit from 0-9
+;   Z - any digit from 1-9
+;   N - any digit from 2-9
+;   [1235-9] - any digit in the brackets (in this example, 1,2,3,5,6,7,8,9)
+;   . - wildcard, matches anything remaining (e.g. _9011. matches 
+;	anything starting with 9011 excluding 9011 itself)
+;   ! - wildcard, causes the matching process to complete as soon as
+;       it can unambiguously determine that no other matches are possible
+;
+; For example the extension _NXXXXXX would match normal 7 digit dialings, 
+; while _1NXXNXXXXXX would represent an area code plus phone number
+; preceded by a one.
+;
+; Each step of an extension is ordered by priority, which must
+; always start with 1 to be considered a valid extension.  The priority
+; "next" or "n" means the previous priority plus one, regardless of whether
+; the previous priority was associated with the current extension or not.
+; The priority "same" or "s" means the same as the previously specified
+; priority, again regardless of whether the previous entry was for the
+; same extension.  Priorities may be immediately followed by a plus sign
+; and another integer to add that amount (most useful with 's' or 'n').  
+; Priorities may then also have an alias, or label, in 
+; parenthesis after their name which can be used in goto situations
+;
+; Contexts contain several lines, one for each step of each
+; extension, which can take one of two forms as listed below,
+; with the first form being preferred.  One may include another
+; context in the current one as well, optionally with a
+; date and time.  Included contexts are included in the order
+; they are listed.
+;
+;[context]
+;exten => someexten,priority[+offset][(alias)],application(arg1,arg2,...)
+;exten => someexten,priority[+offset][(alias)],application,arg1|arg2...
+;
+; Timing list for includes is 
+;
+;   <time range>|<days of week>|<days of month>|<months>
+;
+;include => daytime|9:00-17:00|mon-fri|*|*
+;
+; ignorepat can be used to instruct drivers to not cancel dialtone upon
+; receipt of a particular pattern.  The most commonly used example is
+; of course '9' like this:
+;
+;ignorepat => 9
+;
+; so that dialtone remains even after dialing a 9.
+;
+
+[Engelsystem]
+
+[default]
+;exten => s,1,Playback(demo-abouttotry);
+;exten => s,1,Dial(SIP/1023@camp.eventphone.de);
+exten => s,1,Answer;
+exten => s,2,Playback(beep);
+exten => s,3,Festival(${msg});
+exten => s,4,Playback(beep);
+exten => s,5,Festival(${msg});
+exten => s,6,Hangup;
+
diff --git a/install/default-conf/etc/apache/default b/install/default-conf/etc/apache/default
new file mode 100644
index 00000000..49e60ba1
--- /dev/null
+++ b/install/default-conf/etc/apache/default
@@ -0,0 +1,47 @@
+NameVirtualHost *:80
+<VirtualHost *:80>
+       ServerAdmin webmaster@localhost
+ 
+       DocumentRoot /var/www/http/
+       php_admin_value open_basedir "/var/www/"
+       <Directory />
+               Options FollowSymLinks
+               AllowOverride None
+       </Directory>
+       <Directory /var/www/http/>
+               Options Indexes FollowSymLinks MultiViews
+               AllowOverride None
+               Order allow,deny
+               allow from all
+               # This directive allows us to have apache2's default start page
+               # in /apache2-default/, but still have / go to the right place
+               #RedirectMatch ^/$ /apache2-default/
+       </Directory>
+        
+       ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/
+       <Directory "/usr/lib/cgi-bin">
+               AllowOverride None
+               Options ExecCGI -MultiViews +SymLinksIfOwnerMatch
+               Order allow,deny
+               Allow from all
+       </Directory>
+
+       ErrorLog /var/log/apache2/error.log
+
+       # Possible values include: debug, info, notice, warn, error, crit,
+       # alert, emerg.
+       LogLevel warn
+
+       CustomLog /var/log/apache2/access.log combined
+       ServerSignature On
+
+   Alias /doc/ "/usr/share/doc/"
+   <Directory "/usr/share/doc/">
+       Options Indexes MultiViews FollowSymLinks
+       AllowOverride None
+       Order deny,allow
+       Deny from all
+       Allow from 127.0.0.0/255.0.0.0 ::1/128
+   </Directory>
+
+</VirtualHost>
diff --git a/install/default-conf/etc/apache/https b/install/default-conf/etc/apache/https
new file mode 100644
index 00000000..aaa0bf3f
--- /dev/null
+++ b/install/default-conf/etc/apache/https
@@ -0,0 +1,19 @@
+ 
+<VirtualHost *:443>
+   # SSL (START)
+   SSLEngine on
+   SSLCertificateFile /etc/apache2/ssl/apache.pem
+   SSLCertificateKeyFile /etc/apache2/apache.pem
+   # SSL (ENDE)
+   ServerAdmin webmaster@localhost
+   #kann auch einfach eine IP sein
+   ServerName localhost
+   php_admin_value open_basedir "/var/www/"
+   DocumentRoot /var/www/https
+   <Directory /var/www/https>
+       Order Deny,Allow
+       Allow from all
+       # Zeige keine Verzeichnisse an
+       Options -Indexes
+   </Directory>
+</VirtualHost>
diff --git a/install/default-conf/etc/crontab b/install/default-conf/etc/crontab
new file mode 100644
index 00000000..d58671bc
--- /dev/null
+++ b/install/default-conf/etc/crontab
@@ -0,0 +1 @@
+*/15    * * * * www-data  (cd /var/www/services/ ; php5 cron_dect.php)
diff --git a/install/default-conf/etc/festival.scm b/install/default-conf/etc/festival.scm
new file mode 100644
index 00000000..d39be33e
--- /dev/null
+++ b/install/default-conf/etc/festival.scm
@@ -0,0 +1,17 @@
+;; Any site-wide Festival initialization can be added to this file.
+;; It is marked as a configuration file, so your changes will be saved
+;; across upgrades of the Festival package.
+;;
+
+
+; Server access list (hosts)
+(set! server_access_list '("[^.]+" "127.0.0.1" "localhost.*"))
+
+;; Command for Asterisk begin
+(define (tts_textasterisk string mode)
+	"(tts_textasterisk STRING MODE)
+	Apply tts to STRING.  This function is specifically designed for
+	use in server mode so a single function call may synthesize the string.
+	This function name may be added to the server safe functions."
+	(utt.send.wave.client (utt.wave.resample (utt.wave.rescale (utt.synth (eval (list 'Utterance 'Text string))) 5) 8000)))
+
diff --git a/install/default-conf/var_www_includes/config.php b/install/default-conf/var_www_includes/config.php
new file mode 100644
index 00000000..574c44ae
--- /dev/null
+++ b/install/default-conf/var_www_includes/config.php
@@ -0,0 +1,58 @@
+<?php
+// Adresse des Webservers
+$url = "https://SEDENGELURL";
+
+// Startverzeichnis des Engelhome
+$ENGEL_ROOT = "/";
+
+// Default-Theme auf der Startseite, 1=style1.css usw.
+$default_theme = 10;
+
+// System disable message, ist ist set is: bages schow only this text
+//$SystemDisableMessage="<H1>This system ist moved to a server in the BCC, you can in the moment only youse it in the in Engel Room</H1>";
+
+// Anzahl der News, die auf einer Seite ausgeben werden koennen...
+$DISPLAY_NEWS = 6;
+
+// Anzahl Stunden bis zum Austragen eigener Schichten
+$LETZTES_AUSTRAGEN=3;
+
+//Setzt den zu verwendenden Crypto algorismis 
+// mp5 oder crypt
+// achtung crypt schaltet password �ndern ab
+$crypt_system="md5";
+//$crypt_system="crypt";
+
+// timezonen offsett
+$gmdateOffset=3600;
+
+// f�r Developen 1, sonst = 0
+$debug = 0;
+
+// SSL Cert-KEY
+$show_SSLCERT = "MD5:<br>MD5SED<br>\n".
+    "SHA1:<br>SHA1SED";
+
+//globale const. fuer schischtplan
+$GlobalZeileProStunde = 4;
+
+//Tempdir
+$Tempdir="./tmp";
+
+// local timezone
+date_default_timezone_set("Europe/Berlin");
+
+//Pentabarf ConferenzDI f�r UpdateDB
+$PentabarfXMLhost = "cccv.pentabarf.org";
+$PentabarfXMLpath = "Xcal/conference/";
+$PentabarfXMLEventID = "31";
+$PentabarfGetWith = "fsockopen";        // "fsockopen"/"fopen"/"wget"/"lynx"
+
+
+//Mailing List: is is not defined, the option is not shown
+//$SubscribeMailinglist = "*-subscribe@lists.*";
+
+/// Passord for external Authorization, function only active if the var is defined
+//$CurrentExternAuthPass = 23;
+
+?>
diff --git a/install/default-conf/var_www_includes/config_IAX.php b/install/default-conf/var_www_includes/config_IAX.php
new file mode 100644
index 00000000..87c3d8ea
--- /dev/null
+++ b/install/default-conf/var_www_includes/config_IAX.php
@@ -0,0 +1,16 @@
+<?php
+
+$IAXenable = TRUE;
+
+//Setting Asterisk
+$IAXcontent="Engelsystem";
+$IAXserver="voip.eventphone.de";
+
+//Asterisk output dir
+$AsteriskOutputDir="/var/spool/asterisk/outgoing";
+
+// enable DEBUG messages
+//$DebugDECT = 1;
+dd
+
+?>
diff --git a/install/default-conf/var_www_includes/config_db.php b/install/default-conf/var_www_includes/config_db.php
new file mode 100644
index 00000000..d07529c0
--- /dev/null
+++ b/install/default-conf/var_www_includes/config_db.php
@@ -0,0 +1,9 @@
+<?php
+
+
+// MySQL-Connection Settings
+$config['host'] = "localhost";
+$config['user'] = "root";
+$config['pw'] = "";
+$config['db'] = "engelsystem";
+?>
diff --git a/install/default-conf/var_www_includes/config_jabber.php b/install/default-conf/var_www_includes/config_jabber.php
new file mode 100644
index 00000000..13cd3538
--- /dev/null
+++ b/install/default-conf/var_www_includes/config_jabber.php
@@ -0,0 +1,17 @@
+<?php
+
+    $server    = "jabber.berlin.ccc.de";
+    $port      = "5222";
+
+    $username  = "";
+    $password  = "";
+    $resource  = "";
+
+    $jabber_recipient = array( "xyz@jabber.berlin.ccc.de",
+                               "xyz2@jabber.berlin.ccc.de",
+                              );
+
+    $mail_subject = "Pentabarf Error";
+    $mail_recipient = array("xyz@abc.de", "xyz@abc.de");
+
+?>
diff --git a/install/default-conf/var_www_includes/config_modem.php b/install/default-conf/var_www_includes/config_modem.php
new file mode 100644
index 00000000..e6542fc4
--- /dev/null
+++ b/install/default-conf/var_www_includes/config_modem.php
@@ -0,0 +1,10 @@
+<?php
+  // ist ein modem angeschlossen
+  $ModemEnable = false;
+
+  // COM port
+  $ModemDev ="/dev/ttyS0";
+
+  // vorwahl, bei tnovis telefonanlage fuer das programmieren von weckrufen
+  $WakeupNumber="**3";
+?>