diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-05 11:28:25 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2019-03-05 11:28:25 -0800 |
commit | d9862cfbe2099deb83f0e9c1932c91f2d9c50464 (patch) | |
tree | 7092ef41113269f30b5429868a9d161e171c746d | |
parent | 8feed3efa8022107bcb3432ac3ec9917e078ae70 (diff) | |
parent | aeb669d41ffabb91b1542f1f802cb12a989fced0 (diff) |
Merge tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Paul Burton:
- Support for the MIPSr6 MemoryMapID register & Global INValidate TLB
(GINVT) instructions, allowing for more efficient TLB maintenance
when running on a CPU such as the I6500 that supports these.
- Enable huge page support for MIPS64r6.
- Optimize post-DMA cache sync by removing that code entirely for
kernel configurations in which we know it won't be needed.
- The number of pages allocated for interrupt stacks is now calculated
correctly, where before we would wastefully allocate too much memory
in some configurations.
- The ath79 platform migrates to devicetree.
- The bcm47xx platform sees fixes for the Buffalo WHR-G54S board.
- The ingenic/jz4740 platform gains support for appended devicetrees.
- The cavium_octeon, lantiq, loongson32 & sgi-ip27 platforms all see
cleanups as do various pieces of core architecture code.
* tag 'mips_5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (66 commits)
MIPS: lantiq: Remove separate GPHY Firmware loader
MIPS: ingenic: Add support for appended devicetree
MIPS: SGI-IP27: rework HUB interrupts
MIPS: SGI-IP27: do boot CPU init later
MIPS: SGI-IP27: do xtalk scanning later
MIPS: SGI-IP27: use pr_info/pr_emerg and pr_cont to fix output
MIPS: SGI-IP27: clean up bridge access and header files
MIPS: SGI-IP27: get rid of volatile and hubreg_t
MIPS: irq: Allocate accurate order pages for irq stack
MIPS: dma-noncoherent: Remove bogus condition in dma_sync_phys()
MIPS: eBPF: Remove REG_32BIT_ZERO_EX
MIPS: eBPF: Always return sign extended 32b values
MIPS: CM: Fix indentation
MIPS: BCM47XX: Fix/improve Buffalo WHR-G54S support
MIPS: OCTEON: program rx/tx-delay always from DT
MIPS: OCTEON: delete board-specific link status
MIPS: OCTEON: don't lie about interface type of CN3005 board
MIPS: OCTEON: warn if deprecated link status is being used
MIPS: OCTEON: add fixed-link nodes to in-kernel device tree
MIPS: Delete unused flush_cache_sigtramp()
...
119 files changed, 1610 insertions, 4615 deletions
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt deleted file mode 100644 index a0c19bd1ce66..000000000000 --- a/Documentation/devicetree/bindings/mips/lantiq/rcu-gphy.txt +++ /dev/null @@ -1,36 +0,0 @@ -Lantiq XWAY SoC GPHY binding -============================ - -This binding describes a software-defined ethernet PHY, provided by the RCU -module on newer Lantiq XWAY SoCs (xRX200 and newer). - -------------------------------------------------------------------------------- -Required properties: -- compatible : Should be one of - "lantiq,xrx200a1x-gphy" - "lantiq,xrx200a2x-gphy" - "lantiq,xrx300-gphy" - "lantiq,xrx330-gphy" -- reg : Addrress of the GPHY FW load address register -- resets : Must reference the RCU GPHY reset bit -- reset-names : One entry, value must be "gphy" or optional "gphy2" -- clocks : A reference to the (PMU) GPHY clock gate - -Optional properties: -- lantiq,gphy-mode : GPHY_MODE_GE (default) or GPHY_MODE_FE as defined in - <dt-bindings/mips/lantiq_xway_gphy.h> - - -------------------------------------------------------------------------------- -Example for the GPHys on the xRX200 SoCs: - -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - clocks = <&pmu0 XRX200_PMU_GATE_GPHY>; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt index 7f0822b4beae..58d51f480c9e 100644 --- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt +++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt @@ -26,24 +26,6 @@ Example of the RCU bindings on a xRX200 SoC: ranges = <0x0 0x203000 0x100>; big-endian; - gphy0: gphy@20 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x20 0x4>; - - resets = <&reset0 31 30>, <&reset1 7 7>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; - - gphy1: gphy@68 { - compatible = "lantiq,xrx200a2x-gphy"; - reg = <0x68 0x4>; - - resets = <&reset0 29 28>, <&reset1 6 6>; - reset-names = "gphy", "gphy2"; - lantiq,gphy-mode = <GPHY_MODE_GE>; - }; - reset0: reset-controller@10 { compatible = "lantiq,xrx200-reset"; reg = <0x10 4>, <0x14 4>; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index a84c24d894aa..9036ef9ec74a 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -206,7 +206,6 @@ config ATH79 select COMMON_CLK select CLKDEV_LOOKUP select IRQ_MIPS_CPU - select MIPS_MACHINE select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL @@ -391,7 +390,7 @@ config MACH_INGENIC select GPIOLIB select COMMON_CLK select GENERIC_IRQ_CHIP - select BUILTIN_DTB + select BUILTIN_DTB if MIPS_NO_APPENDED_DTB select USE_OF select LIBFDT @@ -676,6 +675,7 @@ config SGI_IP27 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK select HAVE_PCI + select IRQ_MIPS_CPU select NR_CPUS_DEFAULT_64 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -1124,7 +1124,6 @@ config DMA_NONCOHERENT bool select ARCH_HAS_DMA_MMAP_PGPROT select ARCH_HAS_SYNC_DMA_FOR_DEVICE - select ARCH_HAS_SYNC_DMA_FOR_CPU select NEED_DMA_MAP_STATE select ARCH_HAS_DMA_COHERENT_TO_PFN select DMA_NONCOHERENT_CACHE_SYNC @@ -1556,6 +1555,7 @@ config CPU_MIPS64_R6 select CPU_SUPPORTS_32BIT_KERNEL select CPU_SUPPORTS_64BIT_KERNEL select CPU_SUPPORTS_HIGHMEM + select CPU_SUPPORTS_HUGEPAGES select CPU_SUPPORTS_MSA select MIPS_O32_FP64_SUPPORT if 32BIT || MIPS32_O32 select HAVE_KVM @@ -1881,7 +1881,7 @@ config CPU_LOONGSON2 config CPU_LOONGSON1 bool select CPU_MIPS32 - select CPU_MIPSR1 + select CPU_MIPSR2 select CPU_HAS_PREFETCH select CPU_HAS_LOAD_STORE_LR select CPU_SUPPORTS_32BIT_KERNEL @@ -1943,9 +1943,11 @@ config SYS_HAS_CPU_MIPS32_R3_5 config SYS_HAS_CPU_MIPS32_R5 bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_MIPS32_R6 bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_MIPS64_R1 bool @@ -1955,6 +1957,7 @@ config SYS_HAS_CPU_MIPS64_R2 config SYS_HAS_CPU_MIPS64_R6 bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_R3000 bool @@ -1991,6 +1994,7 @@ config SYS_HAS_CPU_R8000 config SYS_HAS_CPU_R10000 bool + select ARCH_HAS_SYNC_DMA_FOR_CPU if DMA_NONCOHERENT config SYS_HAS_CPU_RM7000 bool @@ -2019,6 +2023,7 @@ config SYS_HAS_CPU_BMIPS4380 config SYS_HAS_CPU_BMIPS5000 bool select SYS_HAS_CPU_BMIPS + select ARCH_HAS_SYNC_DMA_FOR_CPU config SYS_HAS_CPU_XLR bool diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 5b174c3d0de3..8f4486c4415b 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -233,6 +233,8 @@ toolchain-crc := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mcrc) cflags-$(toolchain-crc) += -DTOOLCHAIN_SUPPORTS_CRC toolchain-dsp := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mdsp) cflags-$(toolchain-dsp) += -DTOOLCHAIN_SUPPORTS_DSP +toolchain-ginv := $(call cc-option-yn,$(mips-cflags) -Wa$(comma)-mginv) +cflags-$(toolchain-ginv) += -DTOOLCHAIN_SUPPORTS_GINV # # Firmware support diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index 191c3910eac5..7367416642cb 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -1,79 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 if ATH79 -menu "Atheros AR71XX/AR724X/AR913X machine selection" - -config ATH79_MACH_AP121 - bool "Atheros AP121 reference board" - select SOC_AR933X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Atheros AP121 reference board. - -config ATH79_MACH_AP136 - bool "Atheros AP136 reference board" - select SOC_QCA955X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Atheros AP136 reference board. - -config ATH79_MACH_AP81 - bool "Atheros AP81 reference board" - select SOC_AR913X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Atheros AP81 reference board. - -config ATH79_MACH_DB120 - bool "Atheros DB120 reference board" - select SOC_AR934X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - select ATH79_DEV_WMAC - help - Say 'Y' here if you want your kernel to support the - Atheros DB120 reference board. - -config ATH79_MACH_PB44 - bool "Atheros PB44 reference board" - select SOC_AR71XX - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - select ATH79_DEV_USB - help - Say 'Y' here if you want your kernel to support the - Atheros PB44 reference board. - -config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" - select SOC_AR724X - select ATH79_DEV_GPIO_BUTTONS - select ATH79_DEV_LEDS_GPIO - select ATH79_DEV_SPI - help - Say 'Y' here if you want your kernel to support the - Ubiquiti Networks XM (rev 1.0) board. - -endmenu - config SOC_AR71XX select HAVE_PCI def_bool n diff --git a/arch/mips/ath79/Makefile b/arch/mips/ath79/Makefile index fcc382cfc770..e18d9a2ecf62 100644 --- a/arch/mips/ath79/Makefile +++ b/arch/mips/ath79/Makefile @@ -8,27 +8,6 @@ # under the terms of the GNU General Public License version 2 as published # by the Free Software Foundation. -obj-y := prom.o setup.o irq.o common.o clock.o +obj-y := prom.o setup.o common.o clock.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o -obj-$(CONFIG_PCI) += pci.o - -# -# Devices -# -obj-y += dev-common.o -obj-$(CONFIG_ATH79_DEV_GPIO_BUTTONS) += dev-gpio-buttons.o -obj-$(CONFIG_ATH79_DEV_LEDS_GPIO) += dev-leds-gpio.o -obj-$(CONFIG_ATH79_DEV_SPI) += dev-spi.o -obj-$(CONFIG_ATH79_DEV_USB) += dev-usb.o -obj-$(CONFIG_ATH79_DEV_WMAC) += dev-wmac.o - -# -# Machines -# -obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o -obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o -obj-$(CONFIG_ATH79_MACH_AP81) += mach-ap81.o -obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o -obj-$(CONFIG_ATH79_MACH_PB44) += mach-pb44.o -obj-$(CONFIG_ATH79_MACH_UBNT_XM) += mach-ubnt-xm.o diff --git a/arch/mips/ath79/clock.c b/arch/mips/ath79/clock.c index cf9158e3c2d9..d4ca97e2ec6c 100644 --- a/arch/mips/ath79/clock.c +++ b/arch/mips/ath79/clock.c @@ -26,7 +26,6 @@ #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> #include "common.h" -#include "machtypes.h" #define AR71XX_BASE_FREQ 40000000 #define AR724X_BASE_FREQ 40000000 @@ -37,24 +36,63 @@ static struct clk_onecell_data clk_data = { .clk_num = ARRAY_SIZE(clks), }; -static struct clk *__init ath79_add_sys_clkdev( - const char *id, unsigned long rate) +static const char * const clk_names[ATH79_CLK_END] = { + [ATH79_CLK_CPU] = "cpu", + [ATH79_CLK_DDR] = "ddr", + [ATH79_CLK_AHB] = "ahb", + [ATH79_CLK_REF] = "ref", + [ATH79_CLK_MDIO] = "mdio", +}; + +static const char * __init ath79_clk_name(int type) { - struct clk *clk; - int err; + BUG_ON(type >= ARRAY_SIZE(clk_names) || !clk_names[type]); + return clk_names[type]; +} - clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); +static void __init __ath79_set_clk(int type, const char *name, struct clk *clk) +{ if (IS_ERR(clk)) - panic("failed to allocate %s clock structure", id); + panic("failed to allocate %s clock structure", clk_names[type]); - err = clk_register_clkdev(clk, id, NULL); - if (err) - panic("unable to register %s clock device", id); + clks[type] = clk; + clk_register_clkdev(clk, name, NULL); +} +static struct clk * __init ath79_set_clk(int type, unsigned long rate) +{ + const char *name = ath79_clk_name(type); + struct clk *clk; + + clk = clk_register_fixed_rate(NULL, name, NULL, 0, rate); + __ath79_set_clk(type, name, clk); return clk; } -static void __init ar71xx_clocks_init(void) +static struct clk * __init ath79_set_ff_clk(int type, const char *parent, + unsigned int mult, unsigned int div) +{ + const char *name = ath79_clk_name(type); + struct clk *clk; + + clk = clk_register_fixed_factor(NULL, name, parent, 0, mult, div); + __ath79_set_clk(type, name, clk); + return clk; +} + +static unsigned long __init ath79_setup_ref_clk(unsigned long rate) +{ + struct clk *clk = clks[ATH79_CLK_REF]; + + if (clk) + rate = clk_get_rate(clk); + else + clk = ath79_set_clk(ATH79_CLK_REF, rate); + + return rate; +} + +static void __init ar71xx_clocks_init(void __iomem *pll_base) { unsigned long ref_rate; unsigned long cpu_rate; @@ -64,9 +102,9 @@ static void __init ar71xx_clocks_init(void) u32 freq; u32 div; - ref_rate = AR71XX_BASE_FREQ; + ref_rate = ath79_setup_ref_clk(AR71XX_BASE_FREQ); - pll = ath79_pll_rr(AR71XX_PLL_REG_CPU_CONFIG); + pll = __raw_readl(pll_base + AR71XX_PLL_REG_CPU_CONFIG); div = ((pll >> AR71XX_PLL_FB_SHIFT) & AR71XX_PLL_FB_MASK) + 1; freq = div * ref_rate; @@ -80,31 +118,17 @@ static void __init ar71xx_clocks_init(void) div = (((pll >> AR71XX_AHB_DIV_SHIFT) & AR71XX_AHB_DIV_MASK) + 1) * 2; ahb_rate = cpu_rate / div; - ath79_add_sys_clkdev("ref", ref_rate); - clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); - clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); - clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); - - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ahb", NULL); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); } -static struct clk * __init ath79_reg_ffclk(const char *name, - const char *parent_name, unsigned int mult, unsigned int div) +static void __init ar724x_clocks_init(void __iomem *pll_base) { - struct clk *clk; - - clk = clk_register_fixed_factor(NULL, name, parent_name, 0, mult, div); - if (IS_ERR(clk)) - panic("failed to allocate %s clock structure", name); - - return clk; -} - -static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) -{ - u32 pll; u32 mult, div, ddr_div, ahb_div; + u32 pll; + + ath79_setup_ref_clk(AR71XX_BASE_FREQ); pll = __raw_readl(pll_base + AR724X_PLL_REG_CPU_CONFIG); @@ -114,30 +138,14 @@ static void __init ar724x_clk_init(struct clk *ref_clk, void __iomem *pll_base) ddr_div = ((pll >> AR724X_DDR_DIV_SHIFT) & AR724X_DDR_DIV_MASK) + 1; ahb_div = (((pll >> AR724X_AHB_DIV_SHIFT) & AR724X_AHB_DIV_MASK) + 1) * 2; - clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", mult, div); - clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", mult, div * ddr_div); - clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", mult, div * ahb_div); -} - -static void __init ar724x_clocks_init(void) -{ - struct clk *ref_clk; - - ref_clk = ath79_add_sys_clkdev("ref", AR724X_BASE_FREQ); - - ar724x_clk_init(ref_clk, ath79_pll_base); - - /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ - clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); - clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); - clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); - - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ahb", NULL); + ath79_set_ff_clk(ATH79_CLK_CPU, "ref", mult, div); + ath79_set_ff_clk(ATH79_CLK_DDR, "ref", mult, div * ddr_div); + ath79_set_ff_clk(ATH79_CLK_AHB, "ref", mult, div * ahb_div); } -static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) +static void __init ar933x_clocks_init(void __iomem *pll_base) { + unsigned long ref_rate; u32 clock_ctrl; u32 ref_div; u32 ninit_mul; @@ -146,6 +154,15 @@ static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) u32 cpu_div; u32 ddr_div; u32 ahb_div; + u32 t; + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + if (t & AR933X_BOOTSTRAP_REF_CLK_40) + ref_rate = (40 * 1000 * 1000); + else + ref_rate = (25 * 1000 * 1000); + + ath79_setup_ref_clk(ref_rate); clock_ctrl = __raw_readl(pll_base + AR933X_PLL_CLOCK_CTRL_REG); if (clock_ctrl & AR933X_PLL_CLOCK_CTRL_BYPASS) { @@ -186,37 +203,12 @@ static void __init ar9330_clk_init(struct clk *ref_clk, void __iomem *pll_base) AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK) + 1; } - clks[ATH79_CLK_CPU] = ath79_reg_ffclk("cpu", "ref", - ninit_mul, ref_div * out_div * cpu_div); - clks[ATH79_CLK_DDR] = ath79_reg_ffclk("ddr", "ref", - ninit_mul, ref_div * out_div * ddr_div); - clks[ATH79_CLK_AHB] = ath79_reg_ffclk("ahb", "ref", - ninit_mul, ref_div * out_div * ahb_div); -} - -static void __init ar933x_clocks_init(void) -{ - struct clk *ref_clk; - unsigned long ref_rate; - u32 t; - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - if (t & AR933X_BOOTSTRAP_REF_CLK_40) - ref_rate = (40 * 1000 * 1000); - else - ref_rate = (25 * 1000 * 1000); - - ref_clk = ath79_add_sys_clkdev("ref", ref_rate); - - ar9330_clk_init(ref_clk, ath79_pll_base); - - /* just make happy plat_time_init() from arch/mips/ath79/setup.c */ - clk_register_clkdev(clks[ATH79_CLK_CPU], "cpu", NULL); - clk_register_clkdev(clks[ATH79_CLK_DDR], "ddr", NULL); - clk_register_clkdev(clks[ATH79_CLK_AHB], "ahb", NULL); - - clk_add_alias("wdt", NULL, "ahb", NULL); - clk_add_alias("uart", NULL, "ref", NULL); + ath79_set_ff_clk(ATH79_CLK_CPU, "ref", ninit_mul, + ref_div * out_div * cpu_div); + ath79_set_ff_clk(ATH79_CLK_DDR, "ref", ninit_mul, + ref_div * out_div * ddr_div); + ath79_set_ff_clk(ATH79_CLK_AHB, "ref", ninit_mul, + ref_div * out_div * ahb_div); } static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, @@ -239,7 +231,7 @@ static u32 __init ar934x_get_pll_freq(u32 ref, u32 ref_div, u32 nint, u32 nfrac, return ret; } -static void __init ar934x_clocks_init(void) +static void __init ar934x_clocks_init(void __iomem *pll_base) { unsigned long ref_rate; unsigned long cpu_rate; @@ -258,6 +250,8 @@ static void __init ar934x_clocks_init(void) else ref_rate = 25 * 1000 * 1000; + ref_rate = ath79_setup_ref_clk(ref_rate); + pll = __raw_readl(dpll_base + AR934X_SRIF_CPU_DPLL2_REG); if (pll & AR934X_SRIF_DPLL2_LOCAL_PLL) { out_div = (pll >> AR934X_SRIF_DPLL2_OUTDIV_SHIFT) & @@ -270,7 +264,7 @@ static void __init ar934x_clocks_init(void) AR934X_SRIF_DPLL1_REFDIV_MASK; frac = 1 << 18; } else { - pll = ath79_pll_rr(AR934X_PLL_CPU_CONFIG_REG); + pll = __raw_readl(pll_base + AR934X_PLL_CPU_CONFIG_REG); out_div = (pll >> AR934X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & AR934X_PLL_CPU_CONFIG_OUTDIV_MASK; ref_div = (pll >> AR934X_PLL_CPU_CONFIG_REFDIV_SHIFT) & @@ -297,7 +291,7 @@ static void __init ar934x_clocks_init(void) AR934X_SRIF_DPLL1_REFDIV_MASK; frac = 1 << 18; } else { - pll = ath79_pll_rr(AR934X_PLL_DDR_CONFIG_REG); + pll = __raw_readl(pll_base + AR934X_PLL_DDR_CONFIG_REG); out_div = (pll >> AR934X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & AR934X_PLL_DDR_CONFIG_OUTDIV_MASK; ref_div = (pll >> AR934X_PLL_DDR_CONFIG_REFDIV_SHIFT) & @@ -312,7 +306,7 @@ static void __init ar934x_clocks_init(void) ddr_pll = ar934x_get_pll_freq(ref_rate, ref_div, nint, nfrac, frac, out_div); - clk_ctrl = ath79_pll_rr(AR934X_PLL_CPU_DDR_CLK_CTRL_REG); + clk_ctrl = __raw_readl(pll_base + AR934X_PLL_CPU_DDR_CLK_CTRL_REG); postdiv = (clk_ctrl >> AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_SHIFT) & AR934X_PLL_CPU_DDR_CLK_CTRL_CPU_POST_DIV_MASK; @@ -344,18 +338,18 @@ static void __init ar934x_clocks_init(void) else ahb_rate = cpu_pll / (postdiv + 1); - ath79_add_sys_clkdev("ref", ref_rate); - clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); - clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); - clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); + clk_ctrl = __raw_readl(pll_base + AR934X_PLL_SWITCH_CLOCK_CONTROL_REG); + if (clk_ctrl & AR934X_PLL_SWITCH_CLOCK_CONTROL_MDIO_CLK_SEL) + ath79_set_clk(ATH79_CLK_MDIO, 100 * 1000 * 1000); iounmap(dpll_base); } -static void __init qca953x_clocks_init(void) +static void __init qca953x_clocks_init(void __iomem *pll_base) { unsigned long ref_rate; unsigned long cpu_rate; @@ -371,7 +365,9 @@ static void __init qca953x_clocks_init(void) else ref_rate = 25 * 1000 * 1000; - pll = ath79_pll_rr(QCA953X_PLL_CPU_CONFIG_REG); + ref_rate = ath79_setup_ref_clk(ref_rate); + + pll = __raw_readl(pll_base + QCA953X_PLL_CPU_CONFIG_REG); out_div = (pll >> QCA953X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & QCA953X_PLL_CPU_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA953X_PLL_CPU_CONFIG_REFDIV_SHIFT) & @@ -385,7 +381,7 @@ static void __init qca953x_clocks_init(void) cpu_pll += frac * (ref_rate >> 6) / ref_div; cpu_pll /= (1 << out_div); - pll = ath79_pll_rr(QCA953X_PLL_DDR_CONFIG_REG); + pll = __raw_readl(pll_base + QCA953X_PLL_DDR_CONFIG_REG); out_div = (pll >> QCA953X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & QCA953X_PLL_DDR_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA953X_PLL_DDR_CONFIG_REFDIV_SHIFT) & @@ -399,7 +395,7 @@ static void __init qca953x_clocks_init(void) ddr_pll += frac * (ref_rate >> 6) / (ref_div << 4); ddr_pll /= (1 << out_div); - clk_ctrl = ath79_pll_rr(QCA953X_PLL_CLK_CTRL_REG); + clk_ctrl = __raw_readl(pll_base + QCA953X_PLL_CLK_CTRL_REG); postdiv = (clk_ctrl >> QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & QCA953X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; @@ -431,16 +427,12 @@ static void __init qca953x_clocks_init(void) else ahb_rate = cpu_pll / (postdiv + 1); - ath79_add_sys_clkdev("ref", ref_rate); - ath79_add_sys_clkdev("cpu", cpu_rate); - ath79_add_sys_clkdev("ddr", ddr_rate); - ath79_add_sys_clkdev("ahb", ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); } -static void __init qca955x_clocks_init(void) +static void __init qca955x_clocks_init(void __iomem *pll_base) { unsigned long ref_rate; unsigned long cpu_rate; @@ -456,7 +448,9 @@ static void __init qca955x_clocks_init(void) else ref_rate = 25 * 1000 * 1000; - pll = ath79_pll_rr(QCA955X_PLL_CPU_CONFIG_REG); + ref_rate = ath79_setup_ref_clk(ref_rate); + + pll = __raw_readl(pll_base + QCA955X_PLL_CPU_CONFIG_REG); out_div = (pll >> QCA955X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & QCA955X_PLL_CPU_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA955X_PLL_CPU_CONFIG_REFDIV_SHIFT) & @@ -470,7 +464,7 @@ static void __init qca955x_clocks_init(void) cpu_pll += frac * ref_rate / (ref_div * (1 << 6)); cpu_pll /= (1 << out_div); - pll = ath79_pll_rr(QCA955X_PLL_DDR_CONFIG_REG); + pll = __raw_readl(pll_base + QCA955X_PLL_DDR_CONFIG_REG); out_div = (pll >> QCA955X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & QCA955X_PLL_DDR_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA955X_PLL_DDR_CONFIG_REFDIV_SHIFT) & @@ -484,7 +478,7 @@ static void __init qca955x_clocks_init(void) ddr_pll += frac * ref_rate / (ref_div * (1 << 10)); ddr_pll /= (1 << out_div); - clk_ctrl = ath79_pll_rr(QCA955X_PLL_CLK_CTRL_REG); + clk_ctrl = __raw_readl(pll_base + QCA955X_PLL_CLK_CTRL_REG); postdiv = (clk_ctrl >> QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & QCA955X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; @@ -516,16 +510,12 @@ static void __init qca955x_clocks_init(void) else ahb_rate = cpu_pll / (postdiv + 1); - ath79_add_sys_clkdev("ref", ref_rate); - clks[ATH79_CLK_CPU] = ath79_add_sys_clkdev("cpu", cpu_rate); - clks[ATH79_CLK_DDR] = ath79_add_sys_clkdev("ddr", ddr_rate); - clks[ATH79_CLK_AHB] = ath79_add_sys_clkdev("ahb", ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); } -static void __init qca956x_clocks_init(void) +static void __init qca956x_clocks_init(void __iomem *pll_base) { unsigned long ref_rate; unsigned long cpu_rate; @@ -551,13 +541,15 @@ static void __init qca956x_clocks_init(void) else ref_rate = 25 * 1000 * 1000; - pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG_REG); + ref_rate = ath79_setup_ref_clk(ref_rate); + + pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG_REG); out_div = (pll >> QCA956X_PLL_CPU_CONFIG_OUTDIV_SHIFT) & QCA956X_PLL_CPU_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT) & QCA956X_PLL_CPU_CONFIG_REFDIV_MASK; - pll = ath79_pll_rr(QCA956X_PLL_CPU_CONFIG1_REG); + pll = __raw_readl(pll_base + QCA956X_PLL_CPU_CONFIG1_REG); nint = (pll >> QCA956X_PLL_CPU_CONFIG1_NINT_SHIFT) & QCA956X_PLL_CPU_CONFIG1_NINT_MASK; hfrac = (pll >> QCA956X_PLL_CPU_CONFIG1_NFRAC_H_SHIFT) & @@ -570,12 +562,12 @@ static void __init qca956x_clocks_init(void) cpu_pll += (hfrac >> 13) * ref_rate / ref_div; cpu_pll /= (1 << out_div); - pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG_REG); + pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG_REG); out_div = (pll >> QCA956X_PLL_DDR_CONFIG_OUTDIV_SHIFT) & QCA956X_PLL_DDR_CONFIG_OUTDIV_MASK; ref_div = (pll >> QCA956X_PLL_DDR_CONFIG_REFDIV_SHIFT) & QCA956X_PLL_DDR_CONFIG_REFDIV_MASK; - pll = ath79_pll_rr(QCA956X_PLL_DDR_CONFIG1_REG); + pll = __raw_readl(pll_base + QCA956X_PLL_DDR_CONFIG1_REG); nint = (pll >> QCA956X_PLL_DDR_CONFIG1_NINT_SHIFT) & QCA956X_PLL_DDR_CONFIG1_NINT_MASK; hfrac = (pll >> QCA956X_PLL_DDR_CONFIG1_NFRAC_H_SHIFT) & @@ -588,7 +580,7 @@ static void __init qca956x_clocks_init(void) ddr_pll += (hfrac >> 13) * ref_rate / ref_div; ddr_pll /= (1 << out_div); - clk_ctrl = ath79_pll_rr(QCA956X_PLL_CLK_CTRL_REG); + clk_ctrl = __raw_readl(pll_base + QCA956X_PLL_CLK_CTRL_REG); postdiv = (clk_ctrl >> QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_SHIFT) & QCA956X_PLL_CLK_CTRL_CPU_POST_DIV_MASK; @@ -620,72 +612,19 @@ static void __init qca956x_clocks_init(void) else ahb_rate = cpu_pll / (postdiv + 1); - ath79_add_sys_clkdev("ref", ref_rate); - ath79_add_sys_clkdev("cpu", cpu_rate); - ath79_add_sys_clkdev("ddr", ddr_rate); - ath79_add_sys_clkdev("ahb", ahb_rate); - - clk_add_alias("wdt", NULL, "ref", NULL); - clk_add_alias("uart", NULL, "ref", NULL); -} - -void __init ath79_clocks_init(void) -{ - if (soc_is_ar71xx()) - ar71xx_clocks_init(); - else if (soc_is_ar724x() || soc_is_ar913x()) - ar724x_clocks_init(); - else if (soc_is_ar933x()) - ar933x_clocks_init(); - else if (soc_is_ar934x()) - ar934x_clocks_init(); - else if (soc_is_qca953x()) - qca953x_clocks_init(); - else if (soc_is_qca955x()) - qca955x_clocks_init(); - else if (soc_is_qca956x() || soc_is_tp9343()) - qca956x_clocks_init(); - else - BUG(); -} - -unsigned long __init -ath79_get_sys_clk_rate(const char *id) -{ - struct clk *clk; - unsigned long rate; - - clk = clk_get(NULL, id); - if (IS_ERR(clk)) - panic("unable to get %s clock, err=%d", id, (int) PTR_ERR(clk)); - - rate = clk_get_rate(clk); - clk_put(clk); - - return rate; + ath79_set_clk(ATH79_CLK_CPU, cpu_rate); + ath79_set_clk(ATH79_CLK_DDR, ddr_rate); + ath79_set_clk(ATH79_CLK_AHB, ahb_rate); } -#ifdef CONFIG_OF static void __init ath79_clocks_init_dt(struct device_node *np) { - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} - -CLK_OF_DECLARE(ar7100, "qca,ar7100-pll", ath79_clocks_init_dt); -CLK_OF_DECLARE(ar7240, "qca,ar7240-pll", ath79_clocks_init_dt); -CLK_OF_DECLARE(ar9340, "qca,ar9340-pll", ath79_clocks_init_dt); -CLK_OF_DECLARE(ar9550, "qca,qca9550-pll", ath79_clocks_init_dt); - -static void __init ath79_clocks_init_dt_ng(struct device_node *np) -{ struct clk *ref_clk; void __iomem *pll_base; ref_clk = of_clk_get(np, 0); - if (IS_ERR(ref_clk)) { - pr_err("%pOF: of_clk_get failed\n", np); - goto err; - } + if (!IS_ERR(ref_clk)) + clks[ATH79_CLK_REF] = ref_clk; pll_base = of_iomap(np, 0); if (!pll_base) { @@ -693,14 +632,24 @@ static void __init ath79_clocks_init_dt_ng(struct device_node *np) goto err_clk; } - if (of_device_is_compatible(np, "qca,ar9130-pll")) - ar724x_clk_init(ref_clk, pll_base); + if (of_device_is_compatible(np, "qca,ar7100-pll")) + ar71xx_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,ar7240-pll") || + of_device_is_compatible(np, "qca,ar9130-pll")) + ar724x_clocks_init(pll_base); else if (of_device_is_compatible(np, "qca,ar9330-pll")) - ar9330_clk_init(ref_clk, pll_base); - else { - pr_err("%pOF: could not find any appropriate clk_init()\n", np); - goto err_iounmap; - } + ar933x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,ar9340-pll")) + ar934x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,qca9530-pll")) + qca953x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,qca9550-pll")) + qca955x_clocks_init(pll_base); + else if (of_device_is_compatible(np, "qca,qca9560-pll")) + qca956x_clocks_init(pll_base); + + if (!clks[ATH79_CLK_MDIO]) + clks[ATH79_CLK_MDIO] = clks[ATH79_CLK_REF]; if (of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data)) { pr_err("%pOF: could not register clk provider\n", np); @@ -714,10 +663,13 @@ err_iounmap: err_clk: clk_put(ref_clk); - -err: - return; } -CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt_ng); -CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt_ng); -#endif + +CLK_OF_DECLARE(ar7100_clk, "qca,ar7100-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar7240_clk, "qca,ar7240-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9130_clk, "qca,ar9130-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9330_clk, "qca,ar9330-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9340_clk, "qca,ar9340-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9530_clk, "qca,qca9530-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9550_clk, "qca,qca9550-pll", ath79_clocks_init_dt); +CLK_OF_DECLARE(ar9560_clk, "qca,qca9560-pll", ath79_clocks_init_dt); diff --git a/arch/mips/ath79/common.h b/arch/mips/ath79/common.h index 870c6b2e97e8..25b96f59e8e8 100644 --- a/arch/mips/ath79/common.h +++ b/arch/mips/ath79/common.h @@ -19,11 +19,6 @@ #define ATH79_MEM_SIZE_MIN (2 * 1024 * 1024) #define ATH79_MEM_SIZE_MAX (256 * 1024 * 1024) -void ath79_clocks_init(void); -unsigned long ath79_get_sys_clk_rate(const char *id); - void ath79_ddr_ctrl_init(void); -void ath79_gpio_init(void); - #endif /* __ATH79_COMMON_H */ diff --git a/arch/mips/ath79/dev-common.c b/arch/mips/ath79/dev-common.c deleted file mode 100644 index 9d0172a4dc69..000000000000 --- a/arch/mips/ath79/dev-common.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X common devices - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/platform_data/gpio-ath79.h> -#include <linux/serial_8250.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-common.h" - -static struct resource ath79_uart_resources[] = { - { - .start = AR71XX_UART_BASE, - .end = AR71XX_UART_BASE + AR71XX_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -#define AR71XX_UART_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP) -static struct plat_serial8250_port ath79_uart_data[] = { - { - .mapbase = AR71XX_UART_BASE, - .irq = ATH79_MISC_IRQ(3), - .flags = AR71XX_UART_FLAGS, - .iotype = UPIO_MEM32, - .regshift = 2, - }, { - /* terminating entry */ - } -}; - -static struct platform_device ath79_uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .resource = ath79_uart_resources, - .num_resources = ARRAY_SIZE(ath79_uart_resources), - .dev = { - .platform_data = ath79_uart_data - }, -}; - -static struct resource ar933x_uart_resources[] = { - { - .start = AR933X_UART_BASE, - .end = AR933X_UART_BASE + AR71XX_UART_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = ATH79_MISC_IRQ(3), - .end = ATH79_MISC_IRQ(3), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ar933x_uart_device = { - .name = "ar933x-uart", - .id = -1, - .resource = ar933x_uart_resources, - .num_resources = ARRAY_SIZE(ar933x_uart_resources), -}; - -void __init ath79_register_uart(void) -{ - unsigned long uart_clk_rate; - - uart_clk_rate = ath79_get_sys_clk_rate("uart"); - - if (soc_is_ar71xx() || - soc_is_ar724x() || - soc_is_ar913x() || - soc_is_ar934x() || - soc_is_qca955x()) { - ath79_uart_data[0].uartclk = uart_clk_rate; - platform_device_register(&ath79_uart_device); - } else if (soc_is_ar933x()) { - platform_device_register(&ar933x_uart_device); - } else { - BUG(); - } -} - -void __init ath79_register_wdt(void) -{ - struct resource res; - - memset(&res, 0, sizeof(res)); - - res.flags = IORESOURCE_MEM; - res.start = AR71XX_RESET_BASE + AR71XX_RESET_REG_WDOG_CTRL; - res.end = res.start + 0x8 - 1; - - platform_device_register_simple("ath79-wdt", -1, &res, 1); -} - -static struct ath79_gpio_platform_data ath79_gpio_pdata; - -static struct resource ath79_gpio_resources[] = { - { - .flags = IORESOURCE_MEM, - .start = AR71XX_GPIO_BASE, - .end = AR71XX_GPIO_BASE + AR71XX_GPIO_SIZE - 1, - }, - { - .start = ATH79_MISC_IRQ(2), - .end = ATH79_MISC_IRQ(2), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ath79_gpio_device = { - .name = "ath79-gpio", - .id = -1, - .resource = ath79_gpio_resources, - .num_resources = ARRAY_SIZE(ath79_gpio_resources), - .dev = { - .platform_data = &ath79_gpio_pdata - }, -}; - -void __init ath79_gpio_init(void) -{ - if (soc_is_ar71xx()) { - ath79_gpio_pdata.ngpios = AR71XX_GPIO_COUNT; - } else if (soc_is_ar7240()) { - ath79_gpio_pdata.ngpios = AR7240_GPIO_COUNT; - } else if (soc_is_ar7241() || soc_is_ar7242()) { - ath79_gpio_pdata.ngpios = AR7241_GPIO_COUNT; - } else if (soc_is_ar913x()) { - ath79_gpio_pdata.ngpios = AR913X_GPIO_COUNT; - } else if (soc_is_ar933x()) { - ath79_gpio_pdata.ngpios = AR933X_GPIO_COUNT; - } else if (soc_is_ar934x()) { - ath79_gpio_pdata.ngpios = AR934X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; - } else if (soc_is_qca955x()) { - ath79_gpio_pdata.ngpios = QCA955X_GPIO_COUNT; - ath79_gpio_pdata.oe_inverted = 1; - } else { - BUG(); - } - - platform_device_register(&ath79_gpio_device); -} diff --git a/arch/mips/ath79/dev-common.h b/arch/mips/ath79/dev-common.h deleted file mode 100644 index 0f514e1affce..000000000000 --- a/arch/mips/ath79/dev-common.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X common devices - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_COMMON_H -#define _ATH79_DEV_COMMON_H - -void ath79_register_uart(void); -void ath79_register_wdt(void); - -#endif /* _ATH79_DEV_COMMON_H */ diff --git a/arch/mips/ath79/dev-gpio-buttons.c b/arch/mips/ath79/dev-gpio-buttons.c deleted file mode 100644 index 366b35fb164d..000000000000 --- a/arch/mips/ath79/dev-gpio-buttons.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X GPIO button support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "linux/init.h" -#include "linux/slab.h" -#include <linux/platform_device.h> - -#include "dev-gpio-buttons.h" - -void __init ath79_register_gpio_keys_polled(int id, - unsigned poll_interval, - unsigned nbuttons, - struct gpio_keys_button *buttons) -{ - struct platform_device *pdev; - struct gpio_keys_platform_data pdata; - struct gpio_keys_button *p; - int err; - - p = kmemdup(buttons, nbuttons * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - pdev = platform_device_alloc("gpio-keys-polled", id); - if (!pdev) - goto err_free_buttons; - - memset(&pdata, 0, sizeof(pdata)); - pdata.poll_interval = poll_interval; - pdata.nbuttons = nbuttons; - pdata.buttons = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_buttons: - kfree(p); -} diff --git a/arch/mips/ath79/dev-gpio-buttons.h b/arch/mips/ath79/dev-gpio-buttons.h deleted file mode 100644 index 481847ac1cba..000000000000 --- a/arch/mips/ath79/dev-gpio-buttons.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X GPIO button support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_GPIO_BUTTONS_H -#define _ATH79_DEV_GPIO_BUTTONS_H - -#include <linux/input.h> -#include <linux/gpio_keys.h> - -void ath79_register_gpio_keys_polled(int id, - unsigned poll_interval, - unsigned nbuttons, - struct gpio_keys_button *buttons); - -#endif /* _ATH79_DEV_GPIO_BUTTONS_H */ diff --git a/arch/mips/ath79/dev-leds-gpio.c b/arch/mips/ath79/dev-leds-gpio.c deleted file mode 100644 index dcb1debcefb8..000000000000 --- a/arch/mips/ath79/dev-leds-gpio.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/platform_device.h> - -#include "dev-leds-gpio.h" - -void __init ath79_register_leds_gpio(int id, - unsigned num_leds, - struct gpio_led *leds) -{ - struct platform_device *pdev; - struct gpio_led_platform_data pdata; - struct gpio_led *p; - int err; - - p = kmemdup(leds, num_leds * sizeof(*p), GFP_KERNEL); - if (!p) - return; - - pdev = platform_device_alloc("leds-gpio", id); - if (!pdev) - goto err_free_leds; - - memset(&pdata, 0, sizeof(pdata)); - pdata.num_leds = num_leds; - pdata.leds = p; - - err = platform_device_add_data(pdev, &pdata, sizeof(pdata)); - if (err) - goto err_put_pdev; - - err = platform_device_add(pdev); - if (err) - goto err_put_pdev; - - return; - -err_put_pdev: - platform_device_put(pdev); - -err_free_leds: - kfree(p); -} diff --git a/arch/mips/ath79/dev-leds-gpio.h b/arch/mips/ath79/dev-leds-gpio.h deleted file mode 100644 index 6e5d8851ebcf..000000000000 --- a/arch/mips/ath79/dev-leds-gpio.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X common GPIO LEDs support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_LEDS_GPIO_H -#define _ATH79_DEV_LEDS_GPIO_H - -#include <linux/leds.h> - -void ath79_register_leds_gpio(int id, - unsigned num_leds, - struct gpio_led *leds); - -#endif /* _ATH79_DEV_LEDS_GPIO_H */ diff --git a/arch/mips/ath79/dev-spi.c b/arch/mips/ath79/dev-spi.c deleted file mode 100644 index aa30163efbfd..000000000000 --- a/arch/mips/ath79/dev-spi.c +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X SPI controller device - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "dev-spi.h" - -static struct resource ath79_spi_resources[] = { - { - .start = AR71XX_SPI_BASE, - .end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ath79_spi_device = { - .name = "ath79-spi", - .id = -1, - .resource = ath79_spi_resources, - .num_resources = ARRAY_SIZE(ath79_spi_resources), -}; - -void __init ath79_register_spi(struct ath79_spi_platform_data *pdata, - struct spi_board_info const *info, - unsigned n) -{ - spi_register_board_info(info, n); - ath79_spi_device.dev.platform_data = pdata; - platform_device_register(&ath79_spi_device); -} diff --git a/arch/mips/ath79/dev-spi.h b/arch/mips/ath79/dev-spi.h deleted file mode 100644 index 6e15bc8651be..000000000000 --- a/arch/mips/ath79/dev-spi.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X SPI controller device - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_SPI_H -#define _ATH79_DEV_SPI_H - -#include <linux/spi/spi.h> -#include <linux/platform_data/spi-ath79.h> - -void ath79_register_spi(struct ath79_spi_platform_data *pdata, - struct spi_board_info const *info, - unsigned n); - -#endif /* _ATH79_DEV_SPI_H */ diff --git a/arch/mips/ath79/dev-usb.c b/arch/mips/ath79/dev-usb.c deleted file mode 100644 index 8227265bcc2d..000000000000 --- a/arch/mips/ath79/dev-usb.c +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Atheros AR7XXX/AR9XXX USB Host Controller device - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/usb/ehci_pdriver.h> -#include <linux/usb/ohci_pdriver.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "dev-usb.h" - -static u64 ath79_usb_dmamask = DMA_BIT_MASK(32); - -static struct usb_ohci_pdata ath79_ohci_pdata = { -}; - -static struct usb_ehci_pdata ath79_ehci_pdata_v1 = { - .has_synopsys_hc_bug = 1, -}; - -static struct usb_ehci_pdata ath79_ehci_pdata_v2 = { - .caps_offset = 0x100, - .has_tt = 1, -}; - -static void __init ath79_usb_register(const char *name, int id, - unsigned long base, unsigned long size, - int irq, const void *data, - size_t data_size) -{ - struct resource res[2]; - struct platform_device *pdev; - - memset(res, 0, sizeof(res)); - - res[0].flags = IORESOURCE_MEM; - res[0].start = base; - res[0].end = base + size - 1; - - res[1].flags = IORESOURCE_IRQ; - res[1].start = irq; - res[1].end = irq; - - pdev = platform_device_register_resndata(NULL, name, id, - res, ARRAY_SIZE(res), - data, data_size); - - if (IS_ERR(pdev)) { - pr_err("ath79: unable to register USB at %08lx, err=%d\n", - base, (int) PTR_ERR(pdev)); - return; - } - - pdev->dev.dma_mask = &ath79_usb_dmamask; - pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); -} - -#define AR71XX_USB_RESET_MASK (AR71XX_RESET_USB_HOST | \ - AR71XX_RESET_USB_PHY | \ - AR71XX_RESET_USB_OHCI_DLL) - -static void __init ath79_usb_setup(void) -{ - void __iomem *usb_ctrl_base; - - ath79_device_reset_set(AR71XX_USB_RESET_MASK); - mdelay(1000); - ath79_device_reset_clear(AR71XX_USB_RESET_MASK); - - usb_ctrl_base = ioremap(AR71XX_USB_CTRL_BASE, AR71XX_USB_CTRL_SIZE); - - /* Turning on the Buff and Desc swap bits */ - __raw_writel(0xf0000, usb_ctrl_base + AR71XX_USB_CTRL_REG_CONFIG); - - /* WAR for HW bug. Here it adjusts the duration between two SOFS */ - __raw_writel(0x20c00, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); - - iounmap(usb_ctrl_base); - - mdelay(900); - - ath79_usb_register("ohci-platform", -1, - AR71XX_OHCI_BASE, AR71XX_OHCI_SIZE, - ATH79_MISC_IRQ(6), - &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); - - ath79_usb_register("ehci-platform", -1, - AR71XX_EHCI_BASE, AR71XX_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v1, sizeof(ath79_ehci_pdata_v1)); -} - -static void __init ar7240_usb_setup(void) -{ - void __iomem *usb_ctrl_base; - - ath79_device_reset_clear(AR7240_RESET_OHCI_DLL); - ath79_device_reset_set(AR7240_RESET_USB_HOST); - - mdelay(1000); - - ath79_device_reset_set(AR7240_RESET_OHCI_DLL); - ath79_device_reset_clear(AR7240_RESET_USB_HOST); - - usb_ctrl_base = ioremap(AR7240_USB_CTRL_BASE, AR7240_USB_CTRL_SIZE); - - /* WAR for HW bug. Here it adjusts the duration between two SOFS */ - __raw_writel(0x3, usb_ctrl_base + AR71XX_USB_CTRL_REG_FLADJ); - - iounmap(usb_ctrl_base); - - ath79_usb_register("ohci-platform", -1, - AR7240_OHCI_BASE, AR7240_OHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ohci_pdata, sizeof(ath79_ohci_pdata)); -} - -static void __init ar724x_usb_setup(void) -{ - ath79_device_reset_set(AR724X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ath79_device_reset_clear(AR724X_RESET_USB_HOST); - mdelay(10); - - ath79_device_reset_clear(AR724X_RESET_USB_PHY); - mdelay(10); - - ath79_usb_register("ehci-platform", -1, - AR724X_EHCI_BASE, AR724X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -} - -static void __init ar913x_usb_setup(void) -{ - ath79_device_reset_set(AR913X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ath79_device_reset_clear(AR913X_RESET_USB_HOST); - mdelay(10); - - ath79_device_reset_clear(AR913X_RESET_USB_PHY); - mdelay(10); - - ath79_usb_register("ehci-platform", -1, - AR913X_EHCI_BASE, AR913X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -} - -static void __init ar933x_usb_setup(void) -{ - ath79_device_reset_set(AR933X_RESET_USBSUS_OVERRIDE); - mdelay(10); - - ath79_device_reset_clear(AR933X_RESET_USB_HOST); - mdelay(10); - - ath79_device_reset_clear(AR933X_RESET_USB_PHY); - mdelay(10); - - ath79_usb_register("ehci-platform", -1, - AR933X_EHCI_BASE, AR933X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -} - -static void __init ar934x_usb_setup(void) -{ - u32 bootstrap; - - bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (bootstrap & AR934X_BOOTSTRAP_USB_MODE_DEVICE) - return; - - ath79_device_reset_set(AR934X_RESET_USBSUS_OVERRIDE); - udelay(1000); - - ath79_device_reset_clear(AR934X_RESET_USB_PHY); - udelay(1000); - - ath79_device_reset_clear(AR934X_RESET_USB_PHY_ANALOG); - udelay(1000); - - ath79_device_reset_clear(AR934X_RESET_USB_HOST); - udelay(1000); - - ath79_usb_register("ehci-platform", -1, - AR934X_EHCI_BASE, AR934X_EHCI_SIZE, - ATH79_CPU_IRQ(3), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -} - -static void __init qca955x_usb_setup(void) -{ - ath79_usb_register("ehci-platform", 0, - QCA955X_EHCI0_BASE, QCA955X_EHCI_SIZE, - ATH79_IP3_IRQ(0), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); - - ath79_usb_register("ehci-platform", 1, - QCA955X_EHCI1_BASE, QCA955X_EHCI_SIZE, - ATH79_IP3_IRQ(1), - &ath79_ehci_pdata_v2, sizeof(ath79_ehci_pdata_v2)); -} - -void __init ath79_register_usb(void) -{ - if (soc_is_ar71xx()) - ath79_usb_setup(); - else if (soc_is_ar7240()) - ar7240_usb_setup(); - else if (soc_is_ar7241() || soc_is_ar7242()) - ar724x_usb_setup(); - else if (soc_is_ar913x()) - ar913x_usb_setup(); - else if (soc_is_ar933x()) - ar933x_usb_setup(); - else if (soc_is_ar934x()) - ar934x_usb_setup(); - else if (soc_is_qca955x()) - qca955x_usb_setup(); - else - BUG(); -} diff --git a/arch/mips/ath79/dev-usb.h b/arch/mips/ath79/dev-usb.h deleted file mode 100644 index 4b86a69ca080..000000000000 --- a/arch/mips/ath79/dev-usb.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X USB Host Controller support - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_USB_H -#define _ATH79_DEV_USB_H - -void ath79_register_usb(void); - -#endif /* _ATH79_DEV_USB_H */ diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c deleted file mode 100644 index da190b1b87ce..000000000000 --- a/arch/mips/ath79/dev-wmac.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * Atheros AR913X/AR933X SoC built-in WMAC device support - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/platform_device.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "dev-wmac.h" - -static struct ath9k_platform_data ath79_wmac_data; - -static struct resource ath79_wmac_resources[] = { - { - /* .start and .end fields are filled dynamically */ - .flags = IORESOURCE_MEM, - }, { - /* .start and .end fields are filled dynamically */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device ath79_wmac_device = { - .name = "ath9k", - .id = -1, - .resource = ath79_wmac_resources, - .num_resources = ARRAY_SIZE(ath79_wmac_resources), - .dev = { - .platform_data = &ath79_wmac_data, - }, -}; - -static void __init ar913x_wmac_setup(void) -{ - /* reset the WMAC */ - ath79_device_reset_set(AR913X_RESET_AMBA2WMAC); - mdelay(10); - - ath79_device_reset_clear(AR913X_RESET_AMBA2WMAC); - mdelay(10); - - ath79_wmac_resources[0].start = AR913X_WMAC_BASE; - ath79_wmac_resources[0].end = AR913X_WMAC_BASE + AR913X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); - ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); -} - - -static int ar933x_wmac_reset(void) -{ - ath79_device_reset_set(AR933X_RESET_WMAC); - ath79_device_reset_clear(AR933X_RESET_WMAC); - - return 0; -} - -static int ar933x_r1_get_wmac_revision(void) -{ - return ath79_soc_rev; -} - -static void __init ar933x_wmac_setup(void) -{ - u32 t; - - ar933x_wmac_reset(); - - ath79_wmac_device.name = "ar933x_wmac"; - - ath79_wmac_resources[0].start = AR933X_WMAC_BASE; - ath79_wmac_resources[0].end = AR933X_WMAC_BASE + AR933X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_CPU_IRQ(2); - ath79_wmac_resources[1].end = ATH79_CPU_IRQ(2); - - t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); - if (t & AR933X_BOOTSTRAP_REF_CLK_40) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; - - if (ath79_soc_rev == 1) - ath79_wmac_data.get_mac_revision = ar933x_r1_get_wmac_revision; - - ath79_wmac_data.external_reset = ar933x_wmac_reset; -} - -static void ar934x_wmac_setup(void) -{ - u32 t; - - ath79_wmac_device.name = "ar934x_wmac"; - - ath79_wmac_resources[0].start = AR934X_WMAC_BASE; - ath79_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); - ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); - - t = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if (t & AR934X_BOOTSTRAP_REF_CLK_40) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; -} - -static void qca955x_wmac_setup(void) -{ - u32 t; - - ath79_wmac_device.name = "qca955x_wmac"; - - ath79_wmac_resources[0].start = QCA955X_WMAC_BASE; - ath79_wmac_resources[0].end = QCA955X_WMAC_BASE + QCA955X_WMAC_SIZE - 1; - ath79_wmac_resources[1].start = ATH79_IP2_IRQ(1); - ath79_wmac_resources[1].end = ATH79_IP2_IRQ(1); - - t = ath79_reset_rr(QCA955X_RESET_REG_BOOTSTRAP); - if (t & QCA955X_BOOTSTRAP_REF_CLK_40) - ath79_wmac_data.is_clk_25mhz = false; - else - ath79_wmac_data.is_clk_25mhz = true; -} - -void __init ath79_register_wmac(u8 *cal_data) -{ - if (soc_is_ar913x()) - ar913x_wmac_setup(); - else if (soc_is_ar933x()) - ar933x_wmac_setup(); - else if (soc_is_ar934x()) - ar934x_wmac_setup(); - else if (soc_is_qca955x()) - qca955x_wmac_setup(); - else - BUG(); - - if (cal_data) - memcpy(ath79_wmac_data.eeprom_data, cal_data, - sizeof(ath79_wmac_data.eeprom_data)); - - platform_device_register(&ath79_wmac_device); -} diff --git a/arch/mips/ath79/dev-wmac.h b/arch/mips/ath79/dev-wmac.h deleted file mode 100644 index c9cd8709f090..000000000000 --- a/arch/mips/ath79/dev-wmac.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Atheros AR913X/AR933X SoC built-in WMAC device support - * - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_DEV_WMAC_H -#define _ATH79_DEV_WMAC_H - -void ath79_register_wmac(u8 *cal_data); - -#endif /* _ATH79_DEV_WMAC_H */ diff --git a/arch/mips/ath79/irq.c b/arch/mips/ath79/irq.c deleted file mode 100644 index 2dfff1f19004..000000000000 --- a/arch/mips/ath79/irq.c +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Atheros AR71xx/AR724x/AR913x specific interrupt handling - * - * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com> - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/irqchip.h> -#include <linux/of_irq.h> - -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> - -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include "common.h" -#include "machtypes.h" - - -static void ar934x_ip2_irq_dispatch(struct irq_desc *desc) -{ - u32 status; - - status = ath79_reset_rr(AR934X_RESET_REG_PCIE_WMAC_INT_STATUS); - - if (status & AR934X_PCIE_WMAC_INT_PCIE_ALL) { - ath79_ddr_wb_flush(3); - generic_handle_irq(ATH79_IP2_IRQ(0)); - } else if (status & AR934X_PCIE_WMAC_INT_WMAC_ALL) { - ath79_ddr_wb_flush(4); - generic_handle_irq(ATH79_IP2_IRQ(1)); - } else { - spurious_interrupt(); - } -} - -static void ar934x_ip2_irq_init(void) -{ - int i; - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &dummy_irq_chip, - handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), ar934x_ip2_irq_dispatch); -} - -static void qca955x_ip2_irq_dispatch(struct irq_desc *desc) -{ - u32 status; - - status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); - status &= QCA955X_EXT_INT_PCIE_RC1_ALL | QCA955X_EXT_INT_WMAC_ALL; - - if (status == 0) { - spurious_interrupt(); - return; - } - - if (status & QCA955X_EXT_INT_PCIE_RC1_ALL) { - /* TODO: flush DDR? */ - generic_handle_irq(ATH79_IP2_IRQ(0)); - } - - if (status & QCA955X_EXT_INT_WMAC_ALL) { - /* TODO: flush DDR? */ - generic_handle_irq(ATH79_IP2_IRQ(1)); - } -} - -static void qca955x_ip3_irq_dispatch(struct irq_desc *desc) -{ - u32 status; - - status = ath79_reset_rr(QCA955X_RESET_REG_EXT_INT_STATUS); - status &= QCA955X_EXT_INT_PCIE_RC2_ALL | - QCA955X_EXT_INT_USB1 | - QCA955X_EXT_INT_USB2; - - if (status == 0) { - spurious_interrupt(); - return; - } - - if (status & QCA955X_EXT_INT_USB1) { - /* TODO: flush DDR? */ - generic_handle_irq(ATH79_IP3_IRQ(0)); - } - - if (status & QCA955X_EXT_INT_USB2) { - /* TODO: flush DDR? */ - generic_handle_irq(ATH79_IP3_IRQ(1)); - } - - if (status & QCA955X_EXT_INT_PCIE_RC2_ALL) { - /* TODO: flush DDR? */ - generic_handle_irq(ATH79_IP3_IRQ(2)); - } -} - -static void qca955x_irq_init(void) -{ - int i; - - for (i = ATH79_IP2_IRQ_BASE; - i < ATH79_IP2_IRQ_BASE + ATH79_IP2_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &dummy_irq_chip, - handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(2), qca955x_ip2_irq_dispatch); - - for (i = ATH79_IP3_IRQ_BASE; - i < ATH79_IP3_IRQ_BASE + ATH79_IP3_IRQ_COUNT; i++) - irq_set_chip_and_handler(i, &dummy_irq_chip, - handle_level_irq); - - irq_set_chained_handler(ATH79_CPU_IRQ(3), qca955x_ip3_irq_dispatch); -} - -void __init arch_init_irq(void) -{ - unsigned irq_wb_chan2 = -1; - unsigned irq_wb_chan3 = -1; - bool misc_is_ar71xx; - - if (mips_machtype == ATH79_MACH_GENERIC_OF) { - irqchip_init(); - return; - } - - if (soc_is_ar71xx() || soc_is_ar724x() || - soc_is_ar913x() || soc_is_ar933x()) { - irq_wb_chan2 = 3; - irq_wb_chan3 = 2; - } else if (soc_is_ar934x()) { - irq_wb_chan3 = 2; - } - - ath79_cpu_irq_init(irq_wb_chan2, irq_wb_chan3); - - if (soc_is_ar71xx() || soc_is_ar913x()) - misc_is_ar71xx = true; - else if (soc_is_ar724x() || - soc_is_ar933x() || - soc_is_ar934x() || - soc_is_qca955x()) - misc_is_ar71xx = false; - else - BUG(); - ath79_misc_irq_init( - ath79_reset_base + AR71XX_RESET_REG_MISC_INT_STATUS, - ATH79_CPU_IRQ(6), ATH79_MISC_IRQ_BASE, misc_is_ar71xx); - - if (soc_is_ar934x()) - ar934x_ip2_irq_init(); - else if (soc_is_qca955x()) - qca955x_irq_init(); -} diff --git a/arch/mips/ath79/mach-ap121.c b/arch/mips/ath79/mach-ap121.c deleted file mode 100644 index 1bf73f2a069d..000000000000 --- a/arch/mips/ath79/mach-ap121.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * Atheros AP121 board support - * - * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "machtypes.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" - -#define AP121_GPIO_LED_WLAN 0 -#define AP121_GPIO_LED_USB 1 - -#define AP121_GPIO_BTN_JUMPSTART 11 -#define AP121_GPIO_BTN_RESET 12 - -#define AP121_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP121_KEYS_DEBOUNCE_INTERVAL (3 * AP121_KEYS_POLL_INTERVAL) - -#define AP121_CAL_DATA_ADDR 0x1fff1000 - -static struct gpio_led ap121_leds_gpio[] __initdata = { - { - .name = "ap121:green:usb", - .gpio = AP121_GPIO_LED_USB, - .active_low = 0, - }, - { - .name = "ap121:green:wlan", - .gpio = AP121_GPIO_LED_WLAN, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ap121_gpio_keys[] __initdata = { - { - .desc = "jumpstart button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_GPIO_BTN_JUMPSTART, - .active_low = 1, - }, - { - .desc = "reset button", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = AP121_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP121_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct spi_board_info ap121_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l1606e", - } -}; - -static struct ath79_spi_platform_data ap121_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -static void __init ap121_setup(void) -{ - u8 *cal_data = (u8 *) KSEG1ADDR(AP121_CAL_DATA_ADDR); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap121_leds_gpio), - ap121_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP121_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap121_gpio_keys), - ap121_gpio_keys); - - ath79_register_spi(&ap121_spi_data, ap121_spi_info, - ARRAY_SIZE(ap121_spi_info)); - ath79_register_usb(); - ath79_register_wmac(cal_data); -} - -MIPS_MACHINE(ATH79_MACH_AP121, "AP121", "Atheros AP121 reference board", - ap121_setup); diff --git a/arch/mips/ath79/mach-ap136.c b/arch/mips/ath79/mach-ap136.c deleted file mode 100644 index 07eac58c3641..000000000000 --- a/arch/mips/ath79/mach-ap136.c +++ /dev/null @@ -1,156 +0,0 @@ -/* - * Qualcomm Atheros AP136 reference board support - * - * Copyright (c) 2012 Qualcomm Atheros - * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/ath9k_platform.h> - -#include "machtypes.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "pci.h" - -#define AP136_GPIO_LED_STATUS_RED 14 -#define AP136_GPIO_LED_STATUS_GREEN 19 -#define AP136_GPIO_LED_USB 4 -#define AP136_GPIO_LED_WLAN_2G 13 -#define AP136_GPIO_LED_WLAN_5G 12 -#define AP136_GPIO_LED_WPS_RED 15 -#define AP136_GPIO_LED_WPS_GREEN 20 - -#define AP136_GPIO_BTN_WPS 16 -#define AP136_GPIO_BTN_RFKILL 21 - -#define AP136_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP136_KEYS_DEBOUNCE_INTERVAL (3 * AP136_KEYS_POLL_INTERVAL) - -#define AP136_WMAC_CALDATA_OFFSET 0x1000 -#define AP136_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led ap136_leds_gpio[] __initdata = { - { - .name = "qca:green:status", - .gpio = AP136_GPIO_LED_STATUS_GREEN, - .active_low = 1, - }, - { - .name = "qca:red:status", - .gpio = AP136_GPIO_LED_STATUS_RED, - .active_low = 1, - }, - { - .name = "qca:green:wps", - .gpio = AP136_GPIO_LED_WPS_GREEN, - .active_low = 1, - }, - { - .name = "qca:red:wps", - .gpio = AP136_GPIO_LED_WPS_RED, - .active_low = 1, - }, - { - .name = "qca:red:wlan-2g", - .gpio = AP136_GPIO_LED_WLAN_2G, - .active_low = 1, - }, - { - .name = "qca:red:usb", - .gpio = AP136_GPIO_LED_USB, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap136_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP136_GPIO_BTN_WPS, - .active_low = 1, - }, - { - .desc = "RFKILL button", - .type = EV_KEY, - .code = KEY_RFKILL, - .debounce_interval = AP136_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP136_GPIO_BTN_RFKILL, - .active_low = 1, - }, -}; - -static struct spi_board_info ap136_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", - } -}; - -static struct ath79_spi_platform_data ap136_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -#ifdef CONFIG_PCI -static struct ath9k_platform_data ap136_ath9k_data; - -static int ap136_pci_plat_dev_init(struct pci_dev *dev) -{ - if (dev->bus->number == 1 && (PCI_SLOT(dev->devfn)) == 0) - dev->dev.platform_data = &ap136_ath9k_data; - - return 0; -} - -static void __init ap136_pci_init(u8 *eeprom) -{ - memcpy(ap136_ath9k_data.eeprom_data, eeprom, - sizeof(ap136_ath9k_data.eeprom_data)); - - ath79_pci_set_plat_dev_init(ap136_pci_plat_dev_init); - ath79_register_pci(); -} -#else -static inline void ap136_pci_init(u8 *eeprom) {} -#endif /* CONFIG_PCI */ - -static void __init ap136_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap136_leds_gpio), - ap136_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP136_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap136_gpio_keys), - ap136_gpio_keys); - ath79_register_spi(&ap136_spi_data, ap136_spi_info, - ARRAY_SIZE(ap136_spi_info)); - ath79_register_usb(); - ath79_register_wmac(art + AP136_WMAC_CALDATA_OFFSET); - ap136_pci_init(art + AP136_PCIE_CALDATA_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_AP136_010, "AP136-010", - "Atheros AP136-010 reference board", - ap136_setup); diff --git a/arch/mips/ath79/mach-ap81.c b/arch/mips/ath79/mach-ap81.c deleted file mode 100644 index 1c78d497f930..000000000000 --- a/arch/mips/ath79/mach-ap81.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Atheros AP81 board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include "machtypes.h" -#include "dev-wmac.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" - -#define AP81_GPIO_LED_STATUS 1 -#define AP81_GPIO_LED_AOSS 3 -#define AP81_GPIO_LED_WLAN 6 -#define AP81_GPIO_LED_POWER 14 - -#define AP81_GPIO_BTN_SW4 12 -#define AP81_GPIO_BTN_SW1 21 - -#define AP81_KEYS_POLL_INTERVAL 20 /* msecs */ -#define AP81_KEYS_DEBOUNCE_INTERVAL (3 * AP81_KEYS_POLL_INTERVAL) - -#define AP81_CAL_DATA_ADDR 0x1fff1000 - -static struct gpio_led ap81_leds_gpio[] __initdata = { - { - .name = "ap81:green:status", - .gpio = AP81_GPIO_LED_STATUS, - .active_low = 1, - }, { - .name = "ap81:amber:aoss", - .gpio = AP81_GPIO_LED_AOSS, - .active_low = 1, - }, { - .name = "ap81:green:wlan", - .gpio = AP81_GPIO_LED_WLAN, - .active_low = 1, - }, { - .name = "ap81:green:power", - .gpio = AP81_GPIO_LED_POWER, - .active_low = 1, - } -}; - -static struct gpio_keys_button ap81_gpio_keys[] __initdata = { - { - .desc = "sw1", - .type = EV_KEY, - .code = BTN_0, - .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP81_GPIO_BTN_SW1, - .active_low = 1, - } , { - .desc = "sw4", - .type = EV_KEY, - .code = BTN_1, - .debounce_interval = AP81_KEYS_DEBOUNCE_INTERVAL, - .gpio = AP81_GPIO_BTN_SW4, - .active_low = 1, - } -}; - -static struct spi_board_info ap81_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", - } -}; - -static struct ath79_spi_platform_data ap81_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -static void __init ap81_setup(void) -{ - u8 *cal_data = (u8 *) KSEG1ADDR(AP81_CAL_DATA_ADDR); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio), - ap81_leds_gpio); - ath79_register_gpio_keys_polled(-1, AP81_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ap81_gpio_keys), - ap81_gpio_keys); - ath79_register_spi(&ap81_spi_data, ap81_spi_info, - ARRAY_SIZE(ap81_spi_info)); - ath79_register_wmac(cal_data); - ath79_register_usb(); -} - -MIPS_MACHINE(ATH79_MACH_AP81, "AP81", "Atheros AP81 reference board", - ap81_setup); diff --git a/arch/mips/ath79/mach-db120.c b/arch/mips/ath79/mach-db120.c deleted file mode 100644 index 9423f5aed287..000000000000 --- a/arch/mips/ath79/mach-db120.c +++ /dev/null @@ -1,136 +0,0 @@ -/* - * Atheros DB120 reference board support - * - * Copyright (c) 2011 Qualcomm Atheros - * Copyright (c) 2011 Gabor Juhos <juhosg@openwrt.org> - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ - -#include <linux/pci.h> -#include <linux/ath9k_platform.h> - -#include "machtypes.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "dev-wmac.h" -#include "pci.h" - -#define DB120_GPIO_LED_WLAN_5G 12 -#define DB120_GPIO_LED_WLAN_2G 13 -#define DB120_GPIO_LED_STATUS 14 -#define DB120_GPIO_LED_WPS 15 - -#define DB120_GPIO_BTN_WPS 16 - -#define DB120_KEYS_POLL_INTERVAL 20 /* msecs */ -#define DB120_KEYS_DEBOUNCE_INTERVAL (3 * DB120_KEYS_POLL_INTERVAL) - -#define DB120_WMAC_CALDATA_OFFSET 0x1000 -#define DB120_PCIE_CALDATA_OFFSET 0x5000 - -static struct gpio_led db120_leds_gpio[] __initdata = { - { - .name = "db120:green:status", - .gpio = DB120_GPIO_LED_STATUS, - .active_low = 1, - }, - { - .name = "db120:green:wps", - .gpio = DB120_GPIO_LED_WPS, - .active_low = 1, - }, - { - .name = "db120:green:wlan-5g", - .gpio = DB120_GPIO_LED_WLAN_5G, - .active_low = 1, - }, - { - .name = "db120:green:wlan-2g", - .gpio = DB120_GPIO_LED_WLAN_2G, - .active_low = 1, - }, -}; - -static struct gpio_keys_button db120_gpio_keys[] __initdata = { - { - .desc = "WPS button", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = DB120_KEYS_DEBOUNCE_INTERVAL, - .gpio = DB120_GPIO_BTN_WPS, - .active_low = 1, - }, -}; - -static struct spi_board_info db120_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "s25sl064a", - } -}; - -static struct ath79_spi_platform_data db120_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -#ifdef CONFIG_PCI -static struct ath9k_platform_data db120_ath9k_data; - -static int db120_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &db120_ath9k_data; - break; - } - - return 0; -} - -static void __init db120_pci_init(u8 *eeprom) -{ - memcpy(db120_ath9k_data.eeprom_data, eeprom, - sizeof(db120_ath9k_data.eeprom_data)); - - ath79_pci_set_plat_dev_init(db120_pci_plat_dev_init); - ath79_register_pci(); -} -#else -static inline void db120_pci_init(u8 *eeprom) {} -#endif /* CONFIG_PCI */ - -static void __init db120_setup(void) -{ - u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(db120_leds_gpio), - db120_leds_gpio); - ath79_register_gpio_keys_polled(-1, DB120_KEYS_POLL_INTERVAL, - ARRAY_SIZE(db120_gpio_keys), - db120_gpio_keys); - ath79_register_spi(&db120_spi_data, db120_spi_info, - ARRAY_SIZE(db120_spi_info)); - ath79_register_usb(); - ath79_register_wmac(art + DB120_WMAC_CALDATA_OFFSET); - db120_pci_init(art + DB120_PCIE_CALDATA_OFFSET); -} - -MIPS_MACHINE(ATH79_MACH_DB120, "DB120", "Atheros DB120 reference board", - db120_setup); diff --git a/arch/mips/ath79/mach-pb44.c b/arch/mips/ath79/mach-pb44.c deleted file mode 100644 index 75fb96ca61db..000000000000 --- a/arch/mips/ath79/mach-pb44.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Atheros PB44 reference board support - * - * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/i2c.h> -#include <linux/gpio/machine.h> -#include <linux/platform_data/pcf857x.h> - -#include "machtypes.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "dev-usb.h" -#include "pci.h" - -#define PB44_GPIO_I2C_SCL 0 -#define PB44_GPIO_I2C_SDA 1 - -#define PB44_GPIO_EXP_BASE 16 -#define PB44_GPIO_SW_RESET (PB44_GPIO_EXP_BASE + 6) -#define PB44_GPIO_SW_JUMP (PB44_GPIO_EXP_BASE + 8) -#define PB44_GPIO_LED_JUMP1 (PB44_GPIO_EXP_BASE + 9) -#define PB44_GPIO_LED_JUMP2 (PB44_GPIO_EXP_BASE + 10) - -#define PB44_KEYS_POLL_INTERVAL 20 /* msecs */ -#define PB44_KEYS_DEBOUNCE_INTERVAL (3 * PB44_KEYS_POLL_INTERVAL) - -static struct gpiod_lookup_table pb44_i2c_gpiod_table = { - .dev_id = "i2c-gpio.0", - .table = { - GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SDA, - NULL, 0, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - GPIO_LOOKUP_IDX("ath79-gpio", PB44_GPIO_I2C_SCL, - NULL, 1, GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN), - }, -}; - -static struct platform_device pb44_i2c_gpio_device = { - .name = "i2c-gpio", - .id = 0, - .dev = { - .platform_data = NULL, - } -}; - -static struct pcf857x_platform_data pb44_pcf857x_data = { - .gpio_base = PB44_GPIO_EXP_BASE, -}; - -static struct i2c_board_info pb44_i2c_board_info[] __initdata = { - { - I2C_BOARD_INFO("pcf8575", 0x20), - .platform_data = &pb44_pcf857x_data, - }, -}; - -static struct gpio_led pb44_leds_gpio[] __initdata = { - { - .name = "pb44:amber:jump1", - .gpio = PB44_GPIO_LED_JUMP1, - .active_low = 1, - }, { - .name = "pb44:green:jump2", - .gpio = PB44_GPIO_LED_JUMP2, - .active_low = 1, - }, -}; - -static struct gpio_keys_button pb44_gpio_keys[] __initdata = { - { - .desc = "soft_reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB44_GPIO_SW_RESET, - .active_low = 1, - } , { - .desc = "jumpstart", - .type = EV_KEY, - .code = KEY_WPS_BUTTON, - .debounce_interval = PB44_KEYS_DEBOUNCE_INTERVAL, - .gpio = PB44_GPIO_SW_JUMP, - .active_low = 1, - } -}; - -static struct spi_board_info pb44_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "m25p64", - }, -}; - -static struct ath79_spi_platform_data pb44_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -static void __init pb44_init(void) -{ - gpiod_add_lookup_table(&pb44_i2c_gpiod_table); - i2c_register_board_info(0, pb44_i2c_board_info, - ARRAY_SIZE(pb44_i2c_board_info)); - platform_device_register(&pb44_i2c_gpio_device); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(pb44_leds_gpio), - pb44_leds_gpio); - ath79_register_gpio_keys_polled(-1, PB44_KEYS_POLL_INTERVAL, - ARRAY_SIZE(pb44_gpio_keys), - pb44_gpio_keys); - ath79_register_spi(&pb44_spi_data, pb44_spi_info, - ARRAY_SIZE(pb44_spi_info)); - ath79_register_usb(); - ath79_register_pci(); -} - -MIPS_MACHINE(ATH79_MACH_PB44, "PB44", "Atheros PB44 reference board", - pb44_init); diff --git a/arch/mips/ath79/mach-ubnt-xm.c b/arch/mips/ath79/mach-ubnt-xm.c deleted file mode 100644 index 4a3c60694c75..000000000000 --- a/arch/mips/ath79/mach-ubnt-xm.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * Ubiquiti Networks XM (rev 1.0) board support - * - * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> - * - * Derived from: mach-pb44.c - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/ath9k_platform.h> - -#include <asm/mach-ath79/irq.h> - -#include "machtypes.h" -#include "dev-gpio-buttons.h" -#include "dev-leds-gpio.h" -#include "dev-spi.h" -#include "pci.h" - -#define UBNT_XM_GPIO_LED_L1 0 -#define UBNT_XM_GPIO_LED_L2 1 -#define UBNT_XM_GPIO_LED_L3 11 -#define UBNT_XM_GPIO_LED_L4 7 - -#define UBNT_XM_GPIO_BTN_RESET 12 - -#define UBNT_XM_KEYS_POLL_INTERVAL 20 -#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) - -#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) - -static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { - .name = "ubnt-xm:red:link1", - .gpio = UBNT_XM_GPIO_LED_L1, - .active_low = 0, - }, { - .name = "ubnt-xm:orange:link2", - .gpio = UBNT_XM_GPIO_LED_L2, - .active_low = 0, - }, { - .name = "ubnt-xm:green:link3", - .gpio = UBNT_XM_GPIO_LED_L3, - .active_low = 0, - }, { - .name = "ubnt-xm:green:link4", - .gpio = UBNT_XM_GPIO_LED_L4, - .active_low = 0, - }, -}; - -static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { - { - .desc = "reset", - .type = EV_KEY, - .code = KEY_RESTART, - .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, - .gpio = UBNT_XM_GPIO_BTN_RESET, - .active_low = 1, - } -}; - -static struct spi_board_info ubnt_xm_spi_info[] = { - { - .bus_num = 0, - .chip_select = 0, - .max_speed_hz = 25000000, - .modalias = "mx25l6405d", - } -}; - -static struct ath79_spi_platform_data ubnt_xm_spi_data = { - .bus_num = 0, - .num_chipselect = 1, -}; - -#ifdef CONFIG_PCI -static struct ath9k_platform_data ubnt_xm_eeprom_data; - -static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) -{ - switch (PCI_SLOT(dev->devfn)) { - case 0: - dev->dev.platform_data = &ubnt_xm_eeprom_data; - break; - } - - return 0; -} - -static void __init ubnt_xm_pci_init(void) -{ - memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, - sizeof(ubnt_xm_eeprom_data.eeprom_data)); - - ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); - ath79_register_pci(); -} -#else -static inline void ubnt_xm_pci_init(void) {} -#endif /* CONFIG_PCI */ - -static void __init ubnt_xm_init(void) -{ - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); - - ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - - ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, - ARRAY_SIZE(ubnt_xm_spi_info)); - - ubnt_xm_pci_init(); -} - -MIPS_MACHINE(ATH79_MACH_UBNT_XM, - "UBNT-XM", - "Ubiquiti Networks XM (rev 1.0) board", - ubnt_xm_init); diff --git a/arch/mips/ath79/machtypes.h b/arch/mips/ath79/machtypes.h deleted file mode 100644 index a13db3d15c8f..000000000000 --- a/arch/mips/ath79/machtypes.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Atheros AR71XX/AR724X/AR913X machine type definitions - * - * Copyright (C) 2008-2010 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_MACHTYPE_H -#define _ATH79_MACHTYPE_H - -#include <asm/mips_machine.h> - -enum ath79_mach_type { - ATH79_MACH_GENERIC_OF = -1, /* Device tree board */ - ATH79_MACH_GENERIC = 0, - ATH79_MACH_AP121, /* Atheros AP121 reference board */ - ATH79_MACH_AP136_010, /* Atheros AP136-010 reference board */ - ATH79_MACH_AP81, /* Atheros AP81 reference board */ - ATH79_MACH_DB120, /* Atheros DB120 reference board */ - ATH79_MACH_PB44, /* Atheros PB44 reference board */ - ATH79_MACH_UBNT_XM, /* Ubiquiti Networks XM board rev 1.0 */ -}; - -#endif /* _ATH79_MACHTYPE_H */ diff --git a/arch/mips/ath79/pci.c b/arch/mips/ath79/pci.c deleted file mode 100644 index b816cb4a25ff..000000000000 --- a/arch/mips/ath79/pci.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * Atheros AR71XX/AR724X specific PCI setup code - * - * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * Parts of this file are based on Atheros' 2.6.15 BSP - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/resource.h> -#include <linux/platform_device.h> -#include <asm/mach-ath79/ar71xx_regs.h> -#include <asm/mach-ath79/ath79.h> -#include <asm/mach-ath79/irq.h> -#include "pci.h" - -static int (*ath79_pci_plat_dev_init)(struct pci_dev *dev); -static const struct ath79_pci_irq *ath79_pci_irq_map; -static unsigned ath79_pci_nr_irqs; - -static const struct ath79_pci_irq ar71xx_pci_irq_map[] = { - { - .slot = 17, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - }, { - .slot = 18, - .pin = 1, - .irq = ATH79_PCI_IRQ(1), - }, { - .slot = 19, - .pin = 1, - .irq = ATH79_PCI_IRQ(2), - } -}; - -static const struct ath79_pci_irq ar724x_pci_irq_map[] = { - { - .slot = 0, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - } -}; - -static const struct ath79_pci_irq qca955x_pci_irq_map[] = { - { - .bus = 0, - .slot = 0, - .pin = 1, - .irq = ATH79_PCI_IRQ(0), - }, - { - .bus = 1, - .slot = 0, - .pin = 1, - .irq = ATH79_PCI_IRQ(1), - }, -}; - -int pcibios_map_irq(const struct pci_dev *dev, uint8_t slot, uint8_t pin) -{ - int irq = -1; - int i; - - if (ath79_pci_nr_irqs == 0 || - ath79_pci_irq_map == NULL) { - if (soc_is_ar71xx()) { - ath79_pci_irq_map = ar71xx_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(ar71xx_pci_irq_map); - } else if (soc_is_ar724x() || - soc_is_ar9342() || - soc_is_ar9344()) { - ath79_pci_irq_map = ar724x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(ar724x_pci_irq_map); - } else if (soc_is_qca955x()) { - ath79_pci_irq_map = qca955x_pci_irq_map; - ath79_pci_nr_irqs = ARRAY_SIZE(qca955x_pci_irq_map); - } else { - pr_crit("pci %s: invalid irq map\n", - pci_name((struct pci_dev *) dev)); - return irq; - } - } - - for (i = 0; i < ath79_pci_nr_irqs; i++) { - const struct ath79_pci_irq *entry; - - entry = &ath79_pci_irq_map[i]; - if (entry->bus == dev->bus->number && - entry->slot == slot && - entry->pin == pin) { - irq = entry->irq; - break; - } - } - - if (irq < 0) - pr_crit("pci %s: no irq found for pin %u\n", - pci_name((struct pci_dev *) dev), pin); - else - pr_info("pci %s: using irq %d for pin %u\n", - pci_name((struct pci_dev *) dev), irq, pin); - - return irq; -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - if (ath79_pci_plat_dev_init) - return ath79_pci_plat_dev_init(dev); - - return 0; -} - -void __init ath79_pci_set_irq_map(unsigned nr_irqs, - const struct ath79_pci_irq *map) -{ - ath79_pci_nr_irqs = nr_irqs; - ath79_pci_irq_map = map; -} - -void __init ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)) -{ - ath79_pci_plat_dev_init = func; -} - -static struct platform_device * -ath79_register_pci_ar71xx(void) -{ - struct platform_device *pdev; - struct resource res[4]; - - memset(res, 0, sizeof(res)); - - res[0].name = "cfg_base"; - res[0].flags = IORESOURCE_MEM; - res[0].start = AR71XX_PCI_CFG_BASE; - res[0].end = AR71XX_PCI_CFG_BASE + AR71XX_PCI_CFG_SIZE - 1; - - res[1].flags = IORESOURCE_IRQ; - res[1].start = ATH79_CPU_IRQ(2); - res[1].end = ATH79_CPU_IRQ(2); - - res[2].name = "io_base"; - res[2].flags = IORESOURCE_IO; - res[2].start = 0; - res[2].end = 0; - - res[3].name = "mem_base"; - res[3].flags = IORESOURCE_MEM; - res[3].start = AR71XX_PCI_MEM_BASE; - res[3].end = AR71XX_PCI_MEM_BASE + AR71XX_PCI_MEM_SIZE - 1; - - pdev = platform_device_register_simple("ar71xx-pci", -1, - res, ARRAY_SIZE(res)); - return pdev; -} - -static struct platform_device * -ath79_register_pci_ar724x(int id, - unsigned long cfg_base, - unsigned long ctrl_base, - unsigned long crp_base, - unsigned long mem_base, - unsigned long mem_size, - unsigned long io_base, - int irq) -{ - struct platform_device *pdev; - struct resource res[6]; - - memset(res, 0, sizeof(res)); - - res[0].name = "cfg_base"; - res[0].flags = IORESOURCE_MEM; - res[0].start = cfg_base; - res[0].end = cfg_base + AR724X_PCI_CFG_SIZE - 1; - - res[1].name = "ctrl_base"; - res[1].flags = IORESOURCE_MEM; - res[1].start = ctrl_base; - res[1].end = ctrl_base + AR724X_PCI_CTRL_SIZE - 1; - - res[2].flags = IORESOURCE_IRQ; - res[2].start = irq; - res[2].end = irq; - - res[3].name = "mem_base"; - res[3].flags = IORESOURCE_MEM; - res[3].start = mem_base; - res[3].end = mem_base + mem_size - 1; - - res[4].name = "io_base"; - res[4].flags = IORESOURCE_IO; - res[4].start = io_base; - res[4].end = io_base; - - res[5].name = "crp_base"; - res[5].flags = IORESOURCE_MEM; - res[5].start = crp_base; - res[5].end = crp_base + AR724X_PCI_CRP_SIZE - 1; - - pdev = platform_device_register_simple("ar724x-pci", id, - res, ARRAY_SIZE(res)); - return pdev; -} - -int __init ath79_register_pci(void) -{ - struct platform_device *pdev = NULL; - - if (soc_is_ar71xx()) { - pdev = ath79_register_pci_ar71xx(); - } else if (soc_is_ar724x()) { - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, - AR724X_PCI_CRP_BASE, - AR724X_PCI_MEM_BASE, - AR724X_PCI_MEM_SIZE, - 0, - ATH79_CPU_IRQ(2)); - } else if (soc_is_ar9342() || - soc_is_ar9344()) { - u32 bootstrap; - - bootstrap = ath79_reset_rr(AR934X_RESET_REG_BOOTSTRAP); - if ((bootstrap & AR934X_BOOTSTRAP_PCIE_RC) == 0) - return -ENODEV; - - pdev = ath79_register_pci_ar724x(-1, - AR724X_PCI_CFG_BASE, - AR724X_PCI_CTRL_BASE, - AR724X_PCI_CRP_BASE, - AR724X_PCI_MEM_BASE, - AR724X_PCI_MEM_SIZE, - 0, - ATH79_IP2_IRQ(0)); - } else if (soc_is_qca9558()) { - pdev = ath79_register_pci_ar724x(0, - QCA955X_PCI_CFG_BASE0, - QCA955X_PCI_CTRL_BASE0, - QCA955X_PCI_CRP_BASE0, - QCA955X_PCI_MEM_BASE0, - QCA955X_PCI_MEM_SIZE, - 0, - ATH79_IP2_IRQ(0)); - - pdev = ath79_register_pci_ar724x(1, - QCA955X_PCI_CFG_BASE1, - QCA955X_PCI_CTRL_BASE1, - QCA955X_PCI_CRP_BASE1, - QCA955X_PCI_MEM_BASE1, - QCA955X_PCI_MEM_SIZE, - 1, - ATH79_IP3_IRQ(2)); - } else { - /* No PCI support */ - return -ENODEV; - } - - if (!pdev) - pr_err("unable to register PCI controller device\n"); - - return pdev ? 0 : -ENODEV; -} diff --git a/arch/mips/ath79/pci.h b/arch/mips/ath79/pci.h deleted file mode 100644 index 1d00a3803c37..000000000000 --- a/arch/mips/ath79/pci.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Atheros AR71XX/AR724X PCI support - * - * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> - * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> - * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - */ - -#ifndef _ATH79_PCI_H -#define _ATH79_PCI_H - -struct ath79_pci_irq { - int bus; - u8 slot; - u8 pin; - int irq; -}; - -#ifdef CONFIG_PCI -void ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map); -void ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *dev)); -int ath79_register_pci(void); -#else -static inline void -ath79_pci_set_irq_map(unsigned nr_irqs, const struct ath79_pci_irq *map) {} -static inline void -ath79_pci_set_plat_dev_init(int (*func)(struct pci_dev *)) {} -static inline int ath79_register_pci(void) { return 0; } -#endif - -#endif /* _ATH79_PCI_H */ diff --git a/arch/mips/ath79/setup.c b/arch/mips/ath79/setup.c index 9728abcb18fa..4a70c5de8c92 100644 --- a/arch/mips/ath79/setup.c +++ b/arch/mips/ath79/setup.c @@ -19,6 +19,7 @@ #include <linux/clk.h> #include <linux/clk-provider.h> #include <linux/of_fdt.h> +#include <linux/irqchip.h> #include <asm/bootinfo.h> #include <asm/idle.h> @@ -31,8 +32,6 @@ #include <asm/mach-ath79/ath79.h> #include <asm/mach-ath79/ar71xx_regs.h> #include "common.h" -#include "dev-common.h" -#include "machtypes.h" #define ATH79_SYS_TYPE_LEN 64 @@ -235,25 +234,21 @@ void __init plat_mem_setup(void) else if (fw_passed_dtb) __dt_setup_arch((void *)KSEG0ADDR(fw_passed_dtb)); - if (mips_machtype != ATH79_MACH_GENERIC_OF) { - ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, - AR71XX_RESET_SIZE); - ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, - AR71XX_PLL_SIZE); - ath79_detect_sys_type(); - ath79_ddr_ctrl_init(); + ath79_reset_base = ioremap_nocache(AR71XX_RESET_BASE, + AR71XX_RESET_SIZE); + ath79_pll_base = ioremap_nocache(AR71XX_PLL_BASE, + AR71XX_PLL_SIZE); + ath79_detect_sys_type(); + ath79_ddr_ctrl_init(); - detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); - - /* OF machines should use the reset driver */ - _machine_restart = ath79_restart; - } + detect_memory_region(0, ATH79_MEM_SIZE_MIN, ATH79_MEM_SIZE_MAX); + _machine_restart = ath79_restart; _machine_halt = ath79_halt; pm_power_off = ath79_halt; } -static void __init ath79_of_plat_time_init(void) +void __init plat_time_init(void) { struct device_node *np; struct clk *clk; @@ -283,61 +278,12 @@ static void __init ath79_of_plat_time_init(void) clk_put(clk); } -void __init plat_time_init(void) -{ - unsigned long cpu_clk_rate; - unsigned long ahb_clk_rate; - unsigned long ddr_clk_rate; - unsigned long ref_clk_rate; - - if (IS_ENABLED(CONFIG_OF) && mips_machtype == ATH79_MACH_GENERIC_OF) { - ath79_of_plat_time_init(); - return; - } - - ath79_clocks_init(); - - cpu_clk_rate = ath79_get_sys_clk_rate("cpu"); - ahb_clk_rate = ath79_get_sys_clk_rate("ahb"); - ddr_clk_rate = ath79_get_sys_clk_rate("ddr"); - ref_clk_rate = ath79_get_sys_clk_rate("ref"); - - pr_info("Clocks: CPU:%lu.%03luMHz, DDR:%lu.%03luMHz, AHB:%lu.%03luMHz, Ref:%lu.%03luMHz\n", - cpu_clk_rate / 1000000, (cpu_clk_rate / 1000) % 1000, - ddr_clk_rate / 1000000, (ddr_clk_rate / 1000) % 1000, - ahb_clk_rate / 1000000, (ahb_clk_rate / 1000) % 1000, - ref_clk_rate / 1000000, (ref_clk_rate / 1000) % 1000); - - mips_hpt_frequency = cpu_clk_rate / 2; -} - -static int __init ath79_setup(void) +void __init arch_init_irq(void) { - if (mips_machtype == ATH79_MACH_GENERIC_OF) - return 0; - - ath79_gpio_init(); - ath79_register_uart(); - ath79_register_wdt(); - - mips_machine_setup(); - - return 0; + irqchip_init(); } -arch_initcall(ath79_setup); - void __init device_tree_init(void) { unflatten_and_copy_device_tree(); } - -MIPS_MACHINE(ATH79_MACH_GENERIC, - "Generic", - "Generic AR71XX/AR724X/AR913X based board", - NULL); - -MIPS_MACHINE(ATH79_MACH_GENERIC_OF, - "DTB", - "Generic AR71XX/AR724X/AR913X based board (DT)", - NULL); diff --git a/arch/mips/bcm47xx/buttons.c b/arch/mips/bcm47xx/buttons.c index 977990a609ba..67b6a78d670b 100644 --- a/arch/mips/bcm47xx/buttons.c +++ b/arch/mips/bcm47xx/buttons.c @@ -147,7 +147,7 @@ bcm47xx_buttons_buffalo_whr_g125[] __initconst = { static const struct gpio_keys_button bcm47xx_buttons_buffalo_whr_g54s[] __initconst = { BCM47XX_GPIO_KEY(0, KEY_WPS_BUTTON), - BCM47XX_GPIO_KEY(4, KEY_RESTART), + BCM47XX_GPIO_KEY_H(4, KEY_RESTART), BCM47XX_GPIO_KEY(5, BTN_0), /* Router / AP mode swtich */ }; diff --git a/arch/mips/bcm47xx/leds.c b/arch/mips/bcm47xx/leds.c index d85fcdac8bf0..167c42c71e79 100644 --- a/arch/mips/bcm47xx/leds.c +++ b/arch/mips/bcm47xx/leds.c @@ -152,11 +152,11 @@ bcm47xx_leds_buffalo_whr_g125[] __initconst = { static const struct gpio_led bcm47xx_leds_buffalo_whr_g54s[] __initconst = { - BCM47XX_GPIO_LED(1, "unk", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(2, "unk", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(3, "unk", "internal", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(6, "unk", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), - BCM47XX_GPIO_LED(7, "unk", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(1, "green", "bridge", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(2, "green", "wlan", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(3, "green", "internal", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(6, "amber", "wps", 1, LEDS_GPIO_DEFSTATE_OFF), + BCM47XX_GPIO_LED(7, "red", "diag", 1, LEDS_GPIO_DEFSTATE_OFF), }; static const struct gpio_led diff --git a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts index 0fa3dd1819ff..dda0559cef50 100644 --- a/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts +++ b/arch/mips/boot/dts/cavium-octeon/octeon_3xxx.dts @@ -180,14 +180,28 @@ ethernet@0 { phy-handle = <&phy2>; cavium,alt-phy-handle = <&phy100>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@1 { phy-handle = <&phy3>; cavium,alt-phy-handle = <&phy101>; + rx-delay = <0>; + tx-delay = <0>; + fixed-link { + speed = <1000>; + full-duplex; + }; }; ethernet@2 { phy-handle = <&phy4>; cavium,alt-phy-handle = <&phy102>; + rx-delay = <0>; + tx-delay = <0>; }; ethernet@3 { compatible = "cavium,octeon-3860-pip-port"; diff --git a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts index 243e5dc444fb..962f37fbc7db 100644 --- a/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts +++ b/arch/mips/boot/dts/cavium-octeon/ubnt_e100.dts @@ -33,12 +33,18 @@ interface@0 { ethernet@0 { phy-handle = <&phy7>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@1 { phy-handle = <&phy6>; + rx-delay = <0>; + tx-delay = <0x10>; }; ethernet@2 { phy-handle = <&phy5>; + rx-delay = <0>; + tx-delay = <0x10>; }; }; }; diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c index ab8362e04461..2e2d45bc850d 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper-board.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper-board.c @@ -31,6 +31,7 @@ * network ports from the rest of the cvmx-helper files. */ +#include <linux/bug.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-bootinfo.h> @@ -210,56 +211,18 @@ cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port) { cvmx_helper_link_info_t result; + WARN(!octeon_is_simulation(), + "Using deprecated link status - please update your DT"); + /* Unless we fix it later, all links are defaulted to down */ result.u64 = 0; - /* - * This switch statement should handle all ports that either don't use - * Marvell PHYS, or don't support in-band status. - */ - switch (cvmx_sysinfo_get()->board_type) { - case CVMX_BOARD_TYPE_SIM: + if (octeon_is_simulation()) { /* The simulator gives you a simulated 1Gbps full duplex link */ result.s.link_up = 1; result.s.full_duplex = 1; result.s.speed = 1000; return result; - case CVMX_BOARD_TYPE_EBH3100: - case CVMX_BOARD_TYPE_CN3010_EVB_HS5: - case CVMX_BOARD_TYPE_CN3005_EVB_HS5: - case CVMX_BOARD_TYPE_CN3020_EVB_HS5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - /* Fall through to the generic code below */ - break; - case CVMX_BOARD_TYPE_CUST_NB5: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 1) { - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - break; - case CVMX_BOARD_TYPE_BBGW_REF: - /* Port 1 on these boards is always Gigabit */ - if (ipd_port == 2) { - /* Port 2 is not hooked up */ - result.u64 = 0; - return result; - } else { - /* Ports 0 and 1 connect to the switch */ - result.s.link_up = 1; - result.s.full_duplex = 1; - result.s.speed = 1000; - return result; - } - break; } if (OCTEON_IS_MODEL(OCTEON_CN3XXX) @@ -358,45 +321,6 @@ int __cvmx_helper_board_interface_probe(int interface, int supported_ports) } /** - * Enable packet input/output from the hardware. This function is - * called after by cvmx_helper_packet_hardware_enable() to - * perform board specific initialization. For most boards - * nothing is needed. - * - * @interface: Interface to enable - * - * Returns Zero on success, negative on failure - */ -int __cvmx_helper_board_hardware_enable(int interface) -{ - if (cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5) { - if (interface == 0) { - /* Different config for switch port */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); - /* - * Boards with gigabit WAN ports need a - * different setting that is compatible with - * 100 Mbit settings - */ - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), - 0xc); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), - 0xc); - } - } else if (cvmx_sysinfo_get()->board_type == - CVMX_BOARD_TYPE_UBNT_E100) { - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(0, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(0, interface), 0x10); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(1, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(1, interface), 0x10); - cvmx_write_csr(CVMX_ASXX_RX_CLK_SETX(2, interface), 0); - cvmx_write_csr(CVMX_ASXX_TX_CLK_SETX(2, interface), 0x10); - } - return 0; -} - -/** * Get the clock type used for the USB block based on board type. * Used by the USB code for auto configuration of clock type. * diff --git a/arch/mips/cavium-octeon/executive/cvmx-helper.c b/arch/mips/cavium-octeon/executive/cvmx-helper.c index 38e0444e57e8..de391541d6f7 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-helper.c +++ b/arch/mips/cavium-octeon/executive/cvmx-helper.c @@ -30,6 +30,7 @@ * Helper functions for common, but complicated tasks. * */ +#include <linux/bug.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-config.h> @@ -43,7 +44,6 @@ #include <asm/octeon/cvmx-helper-board.h> #include <asm/octeon/cvmx-pip-defs.h> -#include <asm/octeon/cvmx-smix-defs.h> #include <asm/octeon/cvmx-asxx-defs.h> /* Port count per interface */ @@ -317,22 +317,6 @@ cvmx_helper_interface_mode_t cvmx_helper_interface_get_mode(int interface) return CVMX_HELPER_INTERFACE_MODE_DISABLED; } - if (interface == 0 - && cvmx_sysinfo_get()->board_type == CVMX_BOARD_TYPE_CN3005_EVB_HS5 - && cvmx_sysinfo_get()->board_rev_major == 1) { - /* - * Lie about interface type of CN3005 board. This - * board has a switch on port 1 like the other - * evaluation boards, but it is connected over RGMII - * instead of GMII. Report GMII mode so that the - * speed is forced to 1 Gbit full duplex. Other than - * some initial configuration (which does not use the - * output of this function) there is no difference in - * setup between GMII and RGMII modes. - */ - return CVMX_HELPER_INTERFACE_MODE_GMII; - } - /* Interface 1 is always disabled on CN31XX and CN30XX */ if ((interface == 1) && (OCTEON_IS_MODEL(OCTEON_CN31XX) || OCTEON_IS_MODEL(OCTEON_CN30XX) @@ -778,7 +762,6 @@ static int __cvmx_helper_packet_hardware_enable(int interface) result = __cvmx_helper_loop_enable(interface); break; } - result |= __cvmx_helper_board_hardware_enable(interface); return result; } @@ -1026,7 +1009,6 @@ int cvmx_helper_initialize_packet_io_global(void) int result = 0; int interface; union cvmx_l2c_cfg l2c_cfg; - union cvmx_smix_en smix_en; const int num_interfaces = cvmx_helper_get_number_of_interfaces(); /* @@ -1046,24 +1028,6 @@ int cvmx_helper_initialize_packet_io_global(void) l2c_cfg.s.rfb_arb_mode = 0; cvmx_write_csr(CVMX_L2C_CFG, l2c_cfg.u64); - /* Make sure SMI/MDIO is enabled so we can query PHYs */ - smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(0)); - if (!smix_en.s.en) { - smix_en.s.en = 1; - cvmx_write_csr(CVMX_SMIX_EN(0), smix_en.u64); - } - - /* Newer chips actually have two SMI/MDIO interfaces */ - if (!OCTEON_IS_MODEL(OCTEON_CN3XXX) && - !OCTEON_IS_MODEL(OCTEON_CN58XX) && - !OCTEON_IS_MODEL(OCTEON_CN50XX)) { - smix_en.u64 = cvmx_read_csr(CVMX_SMIX_EN(1)); - if (!smix_en.s.en) { - smix_en.s.en = 1; - cvmx_write_csr(CVMX_SMIX_EN(1), smix_en.u64); - } - } - cvmx_pko_initialize_global(); for (interface = 0; interface < num_interfaces; interface++) { result |= cvmx_helper_interface_probe(interface); @@ -1136,6 +1100,7 @@ cvmx_helper_link_info_t cvmx_helper_link_get(int ipd_port) if (index == 0) result = __cvmx_helper_rgmii_link_get(ipd_port); else { + WARN(1, "Using deprecated link status - please update your DT"); result.s.full_duplex = 1; result.s.link_up = 1; result.s.speed = 1000; diff --git a/arch/mips/cavium-octeon/oct_ilm.c b/arch/mips/cavium-octeon/oct_ilm.c index 2d68a39f1443..13f6c7716b1e 100644 --- a/arch/mips/cavium-octeon/oct_ilm.c +++ b/arch/mips/cavium-octeon/oct_ilm.c @@ -63,31 +63,11 @@ static int reset_statistics(void *data, u64 value) DEFINE_SIMPLE_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n"); -static int init_debufs(void) +static void init_debugfs(void) { - struct dentry *show_dentry; dir = debugfs_create_dir("oct_ilm", 0); - if (!dir) { - pr_err("oct_ilm: failed to create debugfs entry oct_ilm\n"); - return -1; - } - - show_dentry = debugfs_create_file("statistics", 0222, dir, NULL, - &oct_ilm_ops); - if (!show_dentry) { - pr_err("oct_ilm: failed to create debugfs entry oct_ilm/statistics\n"); - return -1; - } - - show_dentry = debugfs_create_file("reset", 0222, dir, NULL, - &reset_statistics_ops); - if (!show_dentry) { - pr_err("oct_ilm: failed to create debugfs entry oct_ilm/reset\n"); - return -1; - } - - return 0; - + debugfs_create_file("statistics", 0222, dir, NULL, &oct_ilm_ops); + debugfs_create_file("reset", 0222, dir, NULL, &reset_statistics_ops); } static void init_latency_info(struct latency_info *li, int startup) @@ -169,11 +149,7 @@ static __init int oct_ilm_module_init(void) int rc; int irq = OCTEON_IRQ_TIMER0 + TIMER_NUM; - rc = init_debufs(); - if (rc) { - WARN(1, "Could not create debugfs entries"); - return rc; - } + init_debugfs(); rc = request_irq(irq, cvm_oct_ciu_timer_interrupt, IRQF_NO_THREAD, "oct_ilm", 0); diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 1f9ba60f7375..51685f893eab 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -458,6 +458,23 @@ static bool __init octeon_has_88e1145(void) !OCTEON_IS_MODEL(OCTEON_CN56XX); } +static bool __init octeon_has_fixed_link(int ipd_port) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + case CVMX_BOARD_TYPE_CN3010_EVB_HS5: + case CVMX_BOARD_TYPE_CN3020_EVB_HS5: + case CVMX_BOARD_TYPE_CUST_NB5: + case CVMX_BOARD_TYPE_EBH3100: + /* Port 1 on these boards is always gigabit. */ + return ipd_port == 1; + case CVMX_BOARD_TYPE_BBGW_REF: + /* Ports 0 and 1 connect to the switch. */ + return ipd_port == 0 || ipd_port == 1; + } + return false; +} + static void __init octeon_fdt_set_phy(int eth, int phy_addr) { const __be32 *phy_handle; @@ -586,12 +603,52 @@ static void __init octeon_fdt_rm_ethernet(int node) fdt_nop_node(initial_boot_params, node); } +static void __init _octeon_rx_tx_delay(int eth, int rx_delay, int tx_delay) +{ + fdt_setprop_inplace_cell(initial_boot_params, eth, "rx-delay", + rx_delay); + fdt_setprop_inplace_cell(initial_boot_params, eth, "tx-delay", + tx_delay); +} + +static void __init octeon_rx_tx_delay(int eth, int iface, int port) +{ + switch (cvmx_sysinfo_get()->board_type) { + case CVMX_BOARD_TYPE_CN3005_EVB_HS5: + if (iface == 0) { + if (port == 0) { + /* + * Boards with gigabit WAN ports need a + * different setting that is compatible with + * 100 Mbit settings + */ + _octeon_rx_tx_delay(eth, 0xc, 0x0c); + return; + } else if (port == 1) { + /* Different config for switch port. */ + _octeon_rx_tx_delay(eth, 0x0, 0x0); + return; + } + } + break; + case CVMX_BOARD_TYPE_UBNT_E100: + if (iface == 0 && port <= 2) { + _octeon_rx_tx_delay(eth, 0x0, 0x10); + return; + } + break; + } + fdt_nop_property(initial_boot_params, eth, "rx-delay"); + fdt_nop_property(initial_boot_params, eth, "tx-delay"); +} + static void __init octeon_fdt_pip_port(int iface, int i, int p, int max) { char name_buffer[20]; int eth; int phy_addr; int ipd_port; + int fixed_link; snprintf(name_buffer, sizeof(name_buffer), "ethernet@%x", p); eth = fdt_subnode_offset(initial_boot_params, iface, name_buffer); @@ -609,6 +666,13 @@ static void __init octeon_fdt_pip_port(int iface, int i, int p, int max) phy_addr = cvmx_helper_board_get_mii_address(ipd_port); octeon_fdt_set_phy(eth, phy_addr); + + fixed_link = fdt_subnode_offset(initial_boot_params, eth, "fixed-link"); + if (fixed_link < 0) + WARN_ON(octeon_has_fixed_link(ipd_port)); + else if (!octeon_has_fixed_link(ipd_port)) + fdt_nop_node(initial_boot_params, fixed_link); + octeon_rx_tx_delay(eth, i, p); } static void __init octeon_fdt_pip_iface(int pip, int idx) diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig index c3cac29e8414..2bb02ea9fb4e 100644 --- a/arch/mips/configs/xway_defconfig +++ b/arch/mips/configs/xway_defconfig @@ -13,7 +13,6 @@ CONFIG_EMBEDDED=y # CONFIG_COMPAT_BRK is not set CONFIG_LANTIQ=y CONFIG_PCI_LANTIQ=y -CONFIG_XRX200_PHY_FW=y CONFIG_CPU_MIPS32_R2=y CONFIG_MIPS_VPE_LOADER=y CONFIG_NR_CPUS=2 diff --git a/arch/mips/include/asm/Kbuild b/arch/mips/include/asm/Kbuild index f15d5db5dd67..87b86cdf126a 100644 --- a/arch/mips/include/asm/Kbuild +++ b/arch/mips/include/asm/Kbuild @@ -3,7 +3,6 @@ generated-y += syscall_table_32_o32.h generated-y += syscall_table_64_n32.h generated-y += syscall_table_64_n64.h generated-y += syscall_table_64_o32.h -generic-(CONFIG_GENERIC_CSUM) += checksum.h generic-y += current.h generic-y += device.h generic-y += dma-contiguous.h diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index b7f6ac5e513c..b865e317a14f 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -105,6 +105,20 @@ */ #define STYPE_SYNC_MB 0x10 +/* + * stype 0x14 - A completion barrier specific to global invalidations + * + * When a sync instruction of this type completes any preceding GINVI or GINVT + * operation has been globalized & completed on all coherent CPUs. Anything + * that the GINV* instruction should invalidate will have been invalidated on + * all coherent CPUs when this instruction completes. It is implementation + * specific whether the GINV* instructions themselves will ensure completion, + * or this sync type will. + * + * In systems implementing global invalidates (ie. with Config5.GI == 2 or 3) + * this sync type also requires that previous SYNCI operations have completed. + */ +#define STYPE_GINV 0x14 #ifdef CONFIG_CPU_HAS_SYNC #define __sync() \ @@ -258,6 +272,11 @@ #define loongson_llsc_mb() do { } while (0) #endif +static inline void sync_ginv(void) +{ + asm volatile("sync\t%0" :: "i"(STYPE_GINV)); +} + #include <asm-generic/barrier.h> #endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/cacheflush.h b/arch/mips/include/asm/cacheflush.h index 4812d1fed0c2..d687b40b9fbb 100644 --- a/arch/mips/include/asm/cacheflush.h +++ b/arch/mips/include/asm/cacheflush.h @@ -25,7 +25,6 @@ * * MIPS specific flush operations: * - * - flush_cache_sigtramp() flush signal trampoline * - flush_icache_all() flush the entire instruction cache * - flush_data_cache_page() flushes a page from the data cache * - __flush_icache_user_range(start, end) flushes range of user instructions @@ -110,7 +109,6 @@ extern void copy_from_user_page(struct vm_area_struct *vma, struct page *page, unsigned long vaddr, void *dst, const void *src, unsigned long len); -extern void (*flush_cache_sigtramp)(unsigned long addr); extern void (*flush_icache_all)(void); extern void (*local_flush_data_cache_page)(void * addr); extern void (*flush_data_cache_page)(unsigned long addr); diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 638de0c25249..f345a873742d 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -36,6 +36,8 @@ */ extern unsigned long __cmpxchg_called_with_bad_pointer(void) __compiletime_error("Bad argument size for cmpxchg"); +extern unsigned long __cmpxchg64_unsupported(void) + __compiletime_error("cmpxchg64 not available; cpu_has_64bits may be false"); extern unsigned long __xchg_called_with_bad_pointer(void) __compiletime_error("Bad argument size for xchg"); @@ -204,12 +206,102 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old, cmpxchg((ptr), (o), (n)); \ }) #else -#include <asm-generic/cmpxchg-local.h> -#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) -#ifndef CONFIG_SMP -#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n)) -#endif -#endif + +# include <asm-generic/cmpxchg-local.h> +# define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) + +# ifdef CONFIG_SMP + +static inline unsigned long __cmpxchg64(volatile void *ptr, + unsigned long long old, + unsigned long long new) +{ + unsigned long long tmp, ret; + unsigned long flags; + + /* + * The assembly below has to combine 32 bit values into a 64 bit + * register, and split 64 bit values from one register into two. If we + * were to take an interrupt in the middle of this we'd only save the + * least significant 32 bits of each register & probably clobber the + * most significant 32 bits of the 64 bit values we're using. In order + * to avoid this we must disable interrupts. + */ + local_irq_save(flags); + + asm volatile( + " .set push \n" + " .set " MIPS_ISA_ARCH_LEVEL " \n" + /* Load 64 bits from ptr */ + "1: lld %L0, %3 # __cmpxchg64 \n" + /* + * Split the 64 bit value we loaded into the 2 registers that hold the + * ret variable. + */ + " dsra %M0, %L0, 32 \n" + " sll %L0, %L0, 0 \n" + /* + * Compare ret against old, breaking out of the loop if they don't + * match. + */ + " bne %M0, %M4, 2f \n" + " bne %L0, %L4, 2f \n" + /* + * Combine the 32 bit halves from the 2 registers that hold the new + * variable into a single 64 bit register. + */ +# if MIPS_ISA_REV >= 2 + " move %L1, %L5 \n" + " dins %L1, %M5, 32, 32 \n" +# else + " dsll %L1, %L5, 32 \n" + " dsrl %L1, %L1, 32 \n" + " .set noat \n" + " dsll $at, %M5, 32 \n" + " or %L1, %L1, $at \n" + " .set at \n" +# endif + /* Attempt to store new at ptr */ + " scd %L1, %2 \n" + /* If we failed, loop! */ + "\t" __scbeqz " %L1, 1b \n" + " .set pop \n" + "2: \n" + : "=&r"(ret), + "=&r"(tmp), + "=" GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr) + : GCC_OFF_SMALL_ASM() (*(unsigned long long *)ptr), + "r" (old), + "r" (new) + : "memory"); + + local_irq_restore(flags); + return ret; +} + +# define cmpxchg64(ptr, o, n) ({ \ + unsigned long long __old = (__typeof__(*(ptr)))(o); \ + unsigned long long __new = (__typeof__(*(ptr)))(n); \ + __typeof__(*(ptr)) __res; \ + \ + /* \ + * We can only use cmpxchg64 if we know that the CPU supports \ + * 64-bits, ie. lld & scd. Our call to __cmpxchg64_unsupported \ + * will cause a build error unless cpu_has_64bits is a \ + * compile-time constant 1. \ + */ \ + if (cpu_has_64bits && kernel_uses_llsc) \ + __res = __cmpxchg64((ptr), __old, __new); \ + else \ + __res = __cmpxchg64_unsupported(); \ + \ + __res; \ +}) + +# else /* !CONFIG_SMP */ +# define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n)) +# endif /* !CONFIG_SMP */ +#endif /* !CONFIG_64BIT */ #undef __scbeqz diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 701e525641b8..6998a9796499 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -591,6 +591,19 @@ #endif /* CONFIG_MIPS_MT_SMP */ /* + * We only enable MMID support for configurations which natively support 64 bit + * atomics because getting good performance from the allocator relies upon + * efficient atomic64_*() functions. + */ +#ifndef cpu_has_mmid +# ifdef CONFIG_GENERIC_ATOMIC64 +# define cpu_has_mmid 0 +# else +# define cpu_has_mmid __isa_ge_and_opt(6, MIPS_CPU_MMID) +# endif +#endif + +/* * Guest capabilities */ #ifndef cpu_guest_has_conf1 diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index 532b49b1dbb3..6ad7d3cabd91 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -422,6 +422,7 @@ enum cpu_type_enum { MBIT_ULL(55) /* CPU shares FTLB entries with another */ #define MIPS_CPU_MT_PER_TC_PERF_COUNTERS \ MBIT_ULL(56) /* CPU has perf counters implemented per TC (MIPSMT ASE) */ +#define MIPS_CPU_MMID MBIT_ULL(57) /* CPU supports MemoryMapIDs */ /* * CPU ASE encodings diff --git a/arch/mips/include/asm/ginvt.h b/arch/mips/include/asm/ginvt.h new file mode 100644 index 000000000000..49c6dbe37338 --- /dev/null +++ b/arch/mips/include/asm/ginvt.h @@ -0,0 +1,56 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __MIPS_ASM_GINVT_H__ +#define __MIPS_ASM_GINVT_H__ + +#include <asm/mipsregs.h> + +enum ginvt_type { + GINVT_FULL, + GINVT_VA, + GINVT_MMID, +}; + +#ifdef TOOLCHAIN_SUPPORTS_GINV +# define _ASM_SET_GINV ".set ginv\n" +#else +_ASM_MACRO_1R1I(ginvt, rs, type, + _ASM_INSN_IF_MIPS(0x7c0000bd | (__rs << 21) | (\\type << 8)) + _ASM_INSN32_IF_MM(0x0000717c | (__rs << 16) | (\\type << 9))); +# define _ASM_SET_GINV +#endif + +static inline void ginvt(unsigned long addr, enum ginvt_type type) +{ + asm volatile( + ".set push\n" + _ASM_SET_GINV + " ginvt %0, %1\n" + ".set pop" + : /* no outputs */ + : "r"(addr), "i"(type) + : "memory"); +} + +static inline void ginvt_full(void) +{ + ginvt(0, GINVT_FULL); +} + +static inline void ginvt_va(unsigned long addr) +{ + addr &= PAGE_MASK << 1; + ginvt(addr, GINVT_VA); +} + +static inline void ginvt_mmid(void) +{ + ginvt(0, GINVT_MMID); +} + +static inline void ginvt_va_mmid(unsigned long addr) +{ + addr &= PAGE_MASK << 1; + ginvt(addr, GINVT_VA | GINVT_MMID); +} + +#endif /* __MIPS_ASM_GINVT_H__ */ diff --git a/arch/mips/include/asm/irqflags.h b/arch/mips/include/asm/irqflags.h index 9d3610be2323..f0b862a83816 100644 --- a/arch/mips/include/asm/irqflags.h +++ b/arch/mips/include/asm/irqflags.h @@ -41,7 +41,7 @@ static inline unsigned long arch_local_irq_save(void) " .set push \n" " .set reorder \n" " .set noat \n" -#if defined(CONFIG_CPU_LOONGSON3) +#if defined(CONFIG_CPU_LOONGSON3) || defined (CONFIG_CPU_LOONGSON1) " mfc0 %[flags], $12 \n" " di \n" #else diff --git a/arch/mips/include/asm/mach-ath79/ath79.h b/arch/mips/include/asm/mach-ath79/ath79.h index 73dcd63b8243..47e8827e9564 100644 --- a/arch/mips/include/asm/mach-ath79/ath79.h +++ b/arch/mips/include/asm/mach-ath79/ath79.h @@ -178,8 +178,4 @@ static inline u32 ath79_reset_rr(unsigned reg) void ath79_device_reset_set(u32 mask); void ath79_device_reset_clear(u32 mask); -void ath79_cpu_irq_init(unsigned irq_wb_chan2, unsigned irq_wb_chan3); -void ath79_misc_irq_init(void __iomem *regs, int irq, - int irq_base, bool is_ar71xx); - #endif /* __ASM_MACH_ATH79_H */ diff --git a/arch/mips/include/asm/mach-ip27/irq.h b/arch/mips/include/asm/mach-ip27/irq.h index b0b7261ff3ad..fd91c58aaf7d 100644 --- a/arch/mips/include/asm/mach-ip27/irq.h +++ b/arch/mips/include/asm/mach-ip27/irq.h @@ -10,13 +10,15 @@ #ifndef __ASM_MACH_IP27_IRQ_H #define __ASM_MACH_IP27_IRQ_H -/* - * A hardwired interrupt number is completely stupid for this system - a - * large configuration might have thousands if not tenthousands of - * interrupts. - */ #define NR_IRQS 256 #include_next <irq.h> +#define IP27_HUB_PEND0_IRQ (MIPS_CPU_IRQ_BASE + 2) +#define IP27_HUB_PEND1_IRQ (MIPS_CPU_IRQ_BASE + 3) +#define IP27_RT_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 4) + +#define IP27_HUB_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) +#define IP27_HUB_IRQ_COUNT 128 + #endif /* __ASM_MACH_IP27_IRQ_H */ diff --git a/arch/mips/include/asm/mach-ip27/mmzone.h b/arch/mips/include/asm/mach-ip27/mmzone.h index 2ed3094dee07..1cd6a23a84f2 100644 --- a/arch/mips/include/asm/mach-ip27/mmzone.h +++ b/arch/mips/include/asm/mach-ip27/mmzone.h @@ -8,20 +8,11 @@ #define pa_to_nid(addr) NASID_TO_COMPACT_NODEID(NASID_GET(addr)) -#define LEVELS_PER_SLICE 128 - -struct slice_data { - unsigned long irq_enable_mask[2]; - int level_to_irq[LEVELS_PER_SLICE]; -}; - struct hub_data { kern_vars_t kern_vars; DECLARE_BITMAP(h_bigwin_used, HUB_NUM_BIG_WINDOW); cpumask_t h_cpus; unsigned long slice_map; - unsigned long irq_alloc_mask[2]; - struct slice_data slice[2]; }; struct node_data { diff --git a/arch/mips/include/asm/mach-loongson32/platform.h b/arch/mips/include/asm/mach-loongson32/platform.h index 8f8fa43ba095..15d1de2300fe 100644 --- a/arch/mips/include/asm/mach-loongson32/platform.h +++ b/arch/mips/include/asm/mach-loongson32/platform.h @@ -17,19 +17,15 @@ extern struct platform_device ls1x_uart_pdev; extern struct platform_device ls1x_cpufreq_pdev; -extern struct platform_device ls1x_dma_pdev; extern struct platform_device ls1x_eth0_pdev; extern struct platform_device ls1x_eth1_pdev; extern struct platform_device ls1x_ehci_pdev; extern struct platform_device ls1x_gpio0_pdev; extern struct platform_device ls1x_gpio1_pdev; -extern struct platform_device ls1x_nand_pdev; extern struct platform_device ls1x_rtc_pdev; extern struct platform_device ls1x_wdt_pdev; void __init ls1x_clk_init(void); -void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata); -void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata); void __init ls1x_rtc_set_extclk(struct platform_device *pdev); void __init ls1x_serial_set_uartclk(struct platform_device *pdev); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index 402b80af91aa..1e6966e8527e 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -667,6 +667,7 @@ #define MIPS_CONF5_FRE (_ULCAST_(1) << 8) #define MIPS_CONF5_UFE (_ULCAST_(1) << 9) #define MIPS_CONF5_CA2 (_ULCAST_(1) << 14) +#define MIPS_CONF5_MI (_ULCAST_(1) << 17) #define MIPS_CONF5_CRCP (_ULCAST_(1) << 18) #define MIPS_CONF5_MSAEN (_ULCAST_(1) << 27) #define MIPS_CONF5_EVA (_ULCAST_(1) << 28) @@ -1247,6 +1248,13 @@ __asm__(".macro parse_r var r\n\t" ENC \ ".endm") +/* Instructions with 1 register operand & 1 immediate operand */ +#define _ASM_MACRO_1R1I(OP, R1, I2, ENC) \ + __asm__(".macro " #OP " " #R1 ", " #I2 "\n\t" \ + "parse_r __" #R1 ", \\" #R1 "\n\t" \ + ENC \ + ".endm") + /* Instructions with 2 register operands */ #define _ASM_MACRO_2R(OP, R1, R2, ENC) \ __asm__(".macro " #OP " " #R1 ", " #R2 "\n\t" \ @@ -1603,6 +1611,9 @@ do { \ #define read_c0_xcontextconfig() __read_ulong_c0_register($4, 3) #define write_c0_xcontextconfig(val) __write_ulong_c0_register($4, 3, val) +#define read_c0_memorymapid() __read_32bit_c0_register($4, 5) +#define write_c0_memorymapid(val) __write_32bit_c0_register($4, 5, val) + #define read_c0_pagemask() __read_32bit_c0_register($5, 0) #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) diff --git a/arch/mips/include/asm/mmu.h b/arch/mips/include/asm/mmu.h index 88a108ce62c1..5df0238f639b 100644 --- a/arch/mips/include/asm/mmu.h +++ b/arch/mips/include/asm/mmu.h @@ -7,7 +7,11 @@ #include <linux/wait.h> typedef struct { - u64 asid[NR_CPUS]; + union { + u64 asid[NR_CPUS]; + atomic64_t mmid; + }; + void *vdso; /* lock to be held whilst modifying fp_bd_emupage_allocmap */ diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index a589585be21b..cddead91acd4 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -17,8 +17,10 @@ #include <linux/smp.h> #include <linux/slab.h> +#include <asm/barrier.h> #include <asm/cacheflush.h> #include <asm/dsemul.h> +#include <asm/ginvt.h> #include <asm/hazards.h> #include <asm/tlbflush.h> #include <asm-generic/mm_hooks.h> @@ -73,6 +75,19 @@ extern unsigned long pgd_current[]; #endif /* CONFIG_MIPS_PGD_C0_CONTEXT*/ /* + * The ginvt instruction will invalidate wired entries when its type field + * targets anything other than the entire TLB. That means that if we were to + * allow the kernel to create wired entries with the MMID of current->active_mm + * then those wired entries could be invalidated when we later use ginvt to + * invalidate TLB entries with that MMID. + * + * In order to prevent ginvt from trashing wired entries, we reserve one MMID + * for use by the kernel when creating wired entries. This MMID will never be + * assigned to a struct mm, and we'll never target it with a ginvt instruction. + */ +#define MMID_KERNEL_WIRED 0 + +/* * All unused by hardware upper bits will be considered * as a software asid extension. */ @@ -88,7 +103,23 @@ static inline u64 asid_first_version(unsigned int cpu) return ~asid_version_mask(cpu) + 1; } -#define cpu_context(cpu, mm) ((mm)->context.asid[cpu]) +static inline u64 cpu_context(unsigned int cpu, const struct mm_struct *mm) +{ + if (cpu_has_mmid) + return atomic64_read(&mm->context.mmid); + + return mm->context.asid[cpu]; +} + +static inline void set_cpu_context(unsigned int cpu, + struct mm_struct *mm, u64 ctx) +{ + if (cpu_has_mmid) + atomic64_set(&mm->context.mmid, ctx); + else + mm->context.asid[cpu] = ctx; +} + #define asid_cache(cpu) (cpu_data[cpu].asid_cache) #define cpu_asid(cpu, mm) \ (cpu_context((cpu), (mm)) & cpu_asid_mask(&cpu_data[cpu])) @@ -97,21 +128,9 @@ static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { } - -/* Normal, classic MIPS get_new_mmu_context */ -static inline void -get_new_mmu_context(struct mm_struct *mm, unsigned long cpu) -{ - u64 asid = asid_cache(cpu); - - if (!((asid += cpu_asid_inc()) & cpu_asid_mask(&cpu_data[cpu]))) { - if (cpu_has_vtag_icache) - flush_icache_all(); - local_flush_tlb_all(); /* start new asid cycle */ - } - - cpu_context(cpu, mm) = asid_cache(cpu) = asid; -} +extern void get_new_mmu_context(struct mm_struct *mm); +extern void check_mmu_context(struct mm_struct *mm); +extern void check_switch_mmu_context(struct mm_struct *mm); /* * Initialize the context related info for a new mm_struct @@ -122,8 +141,12 @@ init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int i; - for_each_possible_cpu(i) - cpu_context(i, mm) = 0; + if (cpu_has_mmid) { + set_cpu_context(0, mm, 0); + } else { + for_each_possible_cpu(i) + set_cpu_context(i, mm, 0); + } mm->context.bd_emupage_allocmap = NULL; spin_lock_init(&mm->context.bd_emupage_lock); @@ -140,11 +163,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, local_irq_save(flags); htw_stop(); - /* Check if our ASID is of an older version and thus invalid */ - if ((cpu_context(cpu, next) ^ asid_cache(cpu)) & asid_version_mask(cpu)) - get_new_mmu_context(next, cpu); - write_c0_entryhi(cpu_asid(cpu, next)); - TLBMISS_HANDLER_SETUP_PGD(next->pgd); + check_switch_mmu_context(next); /* * Mark current->active_mm as not "active" anymore. @@ -166,55 +185,55 @@ static inline void destroy_context(struct mm_struct *mm) dsemul_mm_cleanup(mm); } +#define activate_mm(prev, next) switch_mm(prev, next, current) #define deactivate_mm(tsk, mm) do { } while (0) -/* - * After we have set current->mm to a new value, this activates - * the context for the new mm so we see the new mappings. - */ -static inline void -activate_mm(struct mm_struct *prev, struct mm_struct *next) -{ - unsigned long flags; - unsigned int cpu = smp_processor_id(); - - local_irq_save(flags); - - htw_stop(); - /* Unconditionally get a new ASID. */ - get_new_mmu_context(next, cpu); - - write_c0_entryhi(cpu_asid(cpu, next)); - TLBMISS_HANDLER_SETUP_PGD(next->pgd); - - /* mark mmu ownership change */ - cpumask_clear_cpu(cpu, mm_cpumask(prev)); - cpumask_set_cpu(cpu, mm_cpumask(next)); - htw_start(); - - local_irq_restore(flags); -} - -/* - * If mm is currently active_mm, we can't really drop it. Instead, - * we will get a new one for it. - */ static inline void -drop_mmu_context(struct mm_struct *mm, unsigned cpu) +drop_mmu_context(struct mm_struct *mm) { unsigned long flags; + unsigned int cpu; + u32 old_mmid; + u64 ctx; local_irq_save(flags); - htw_stop(); - if (cpumask_test_cpu(cpu, mm_cpumask(mm))) { - get_new_mmu_context(mm, cpu); + cpu = smp_processor_id(); + ctx = cpu_context(cpu, mm); + + if (!ctx) { + /* no-op */ + } else if (cpu_has_mmid) { + /* + * Globally invalidating TLB entries associated with the MMID + * is pretty cheap using the GINVT instruction, so we'll do + * that rather than incur the overhead of allocating a new + * MMID. The latter would be especially difficult since MMIDs + * are global & other CPUs may be actively using ctx. + */ + htw_stop(); + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(ctx & cpu_asid_mask(&cpu_data[cpu])); + mtc0_tlbw_hazard(); + ginvt_mmid(); + sync_ginv(); + write_c0_memorymapid(old_mmid); + instruction_hazard(); + htw_start(); + } else if (cpumask_test_cpu(cpu, mm_cpumask(mm))) { + /* + * mm is currently active, so we can't really drop it. + * Instead we bump the ASID. + */ + htw_stop(); + get_new_mmu_context(mm); write_c0_entryhi(cpu_asid(cpu, mm)); + htw_start(); } else { /* will get a new context next time */ - cpu_context(cpu, mm) = 0; + set_cpu_context(cpu, mm, 0); } - htw_start(); + local_irq_restore(flags); } diff --git a/arch/mips/include/asm/octeon/cvmx-helper-board.h b/arch/mips/include/asm/octeon/cvmx-helper-board.h index b4d19c21b62c..d7fdcf0a0088 100644 --- a/arch/mips/include/asm/octeon/cvmx-helper-board.h +++ b/arch/mips/include/asm/octeon/cvmx-helper-board.h @@ -119,18 +119,6 @@ extern cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port); extern int __cvmx_helper_board_interface_probe(int interface, int supported_ports); -/** - * Enable packet input/output from the hardware. This function is - * called after by cvmx_helper_packet_hardware_enable() to - * perform board specific initialization. For most boards - * nothing is needed. - * - * @interface: Interface to enable - * - * Returns Zero on success, negative on failure - */ -extern int __cvmx_helper_board_hardware_enable(int interface); - enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void); #endif /* __CVMX_HELPER_BOARD_H__ */ diff --git a/arch/mips/include/asm/octeon/cvmx-smix-defs.h b/arch/mips/include/asm/octeon/cvmx-smix-defs.h deleted file mode 100644 index 7a928230b0c0..000000000000 --- a/arch/mips/include/asm/octeon/cvmx-smix-defs.h +++ /dev/null @@ -1,276 +0,0 @@ -/***********************license start*************** - * Author: Cavium Networks - * - * Contact: support@caviumnetworks.com - * This file is part of the OCTEON SDK - * - * Copyright (c) 2003-2012 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, but - * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or - * NONINFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this file; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * or visit http://www.gnu.org/licenses/. - * - * This file may also be available under a different license from Cavium. - * Contact Cavium Networks for more information - ***********************license end**************************************/ - -#ifndef __CVMX_SMIX_DEFS_H__ -#define __CVMX_SMIX_DEFS_H__ - -static inline uint64_t CVMX_SMIX_CLK(unsigned long offset) -{ - switch (cvmx_get_octeon_family()) { - case OCTEON_CN30XX & OCTEON_FAMILY_MASK: - case OCTEON_CN50XX & OCTEON_FAMILY_MASK: - case OCTEON_CN38XX & OCTEON_FAMILY_MASK: - case OCTEON_CN31XX & OCTEON_FAMILY_MASK: - case OCTEON_CN58XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001818ull) + (offset) * 256; - case OCTEON_CNF71XX & OCTEON_FAMILY_MASK: - case OCTEON_CN61XX & OCTEON_FAMILY_MASK: - case OCTEON_CN56XX & OCTEON_FAMILY_MASK: - case OCTEON_CN66XX & OCTEON_FAMILY_MASK: - case OCTEON_CN52XX & OCTEON_FAMILY_MASK: - case OCTEON_CN63XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001818ull) + (offset) * 256; - case OCTEON_CN68XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000003818ull) + (offset) * 128; - } - return CVMX_ADD_IO_SEG(0x0001180000001818ull) + (offset) * 256; -} - -static inline uint64_t CVMX_SMIX_CMD(unsigned long offset) -{ - switch (cvmx_get_octeon_family()) { - case OCTEON_CN30XX & OCTEON_FAMILY_MASK: - case OCTEON_CN50XX & OCTEON_FAMILY_MASK: - case OCTEON_CN38XX & OCTEON_FAMILY_MASK: - case OCTEON_CN31XX & OCTEON_FAMILY_MASK: - case OCTEON_CN58XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001800ull) + (offset) * 256; - case OCTEON_CNF71XX & OCTEON_FAMILY_MASK: - case OCTEON_CN61XX & OCTEON_FAMILY_MASK: - case OCTEON_CN56XX & OCTEON_FAMILY_MASK: - case OCTEON_CN66XX & OCTEON_FAMILY_MASK: - case OCTEON_CN52XX & OCTEON_FAMILY_MASK: - case OCTEON_CN63XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001800ull) + (offset) * 256; - case OCTEON_CN68XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000003800ull) + (offset) * 128; - } - return CVMX_ADD_IO_SEG(0x0001180000001800ull) + (offset) * 256; -} - -static inline uint64_t CVMX_SMIX_EN(unsigned long offset) -{ - switch (cvmx_get_octeon_family()) { - case OCTEON_CN30XX & OCTEON_FAMILY_MASK: - case OCTEON_CN50XX & OCTEON_FAMILY_MASK: - case OCTEON_CN38XX & OCTEON_FAMILY_MASK: - case OCTEON_CN31XX & OCTEON_FAMILY_MASK: - case OCTEON_CN58XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001820ull) + (offset) * 256; - case OCTEON_CNF71XX & OCTEON_FAMILY_MASK: - case OCTEON_CN61XX & OCTEON_FAMILY_MASK: - case OCTEON_CN56XX & OCTEON_FAMILY_MASK: - case OCTEON_CN66XX & OCTEON_FAMILY_MASK: - case OCTEON_CN52XX & OCTEON_FAMILY_MASK: - case OCTEON_CN63XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001820ull) + (offset) * 256; - case OCTEON_CN68XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000003820ull) + (offset) * 128; - } - return CVMX_ADD_IO_SEG(0x0001180000001820ull) + (offset) * 256; -} - -static inline uint64_t CVMX_SMIX_RD_DAT(unsigned long offset) -{ - switch (cvmx_get_octeon_family()) { - case OCTEON_CN30XX & OCTEON_FAMILY_MASK: - case OCTEON_CN50XX & OCTEON_FAMILY_MASK: - case OCTEON_CN38XX & OCTEON_FAMILY_MASK: - case OCTEON_CN31XX & OCTEON_FAMILY_MASK: - case OCTEON_CN58XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001810ull) + (offset) * 256; - case OCTEON_CNF71XX & OCTEON_FAMILY_MASK: - case OCTEON_CN61XX & OCTEON_FAMILY_MASK: - case OCTEON_CN56XX & OCTEON_FAMILY_MASK: - case OCTEON_CN66XX & OCTEON_FAMILY_MASK: - case OCTEON_CN52XX & OCTEON_FAMILY_MASK: - case OCTEON_CN63XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001810ull) + (offset) * 256; - case OCTEON_CN68XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000003810ull) + (offset) * 128; - } - return CVMX_ADD_IO_SEG(0x0001180000001810ull) + (offset) * 256; -} - -static inline uint64_t CVMX_SMIX_WR_DAT(unsigned long offset) -{ - switch (cvmx_get_octeon_family()) { - case OCTEON_CN30XX & OCTEON_FAMILY_MASK: - case OCTEON_CN50XX & OCTEON_FAMILY_MASK: - case OCTEON_CN38XX & OCTEON_FAMILY_MASK: - case OCTEON_CN31XX & OCTEON_FAMILY_MASK: - case OCTEON_CN58XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001808ull) + (offset) * 256; - case OCTEON_CNF71XX & OCTEON_FAMILY_MASK: - case OCTEON_CN61XX & OCTEON_FAMILY_MASK: - case OCTEON_CN56XX & OCTEON_FAMILY_MASK: - case OCTEON_CN66XX & OCTEON_FAMILY_MASK: - case OCTEON_CN52XX & OCTEON_FAMILY_MASK: - case OCTEON_CN63XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000001808ull) + (offset) * 256; - case OCTEON_CN68XX & OCTEON_FAMILY_MASK: - return CVMX_ADD_IO_SEG(0x0001180000003808ull) + (offset) * 128; - } - return CVMX_ADD_IO_SEG(0x0001180000001808ull) + (offset) * 256; -} - -union cvmx_smix_clk { - uint64_t u64; - struct cvmx_smix_clk_s { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_25_63:39; - uint64_t mode:1; - uint64_t reserved_21_23:3; - uint64_t sample_hi:5; - uint64_t sample_mode:1; - uint64_t reserved_14_14:1; - uint64_t clk_idle:1; - uint64_t preamble:1; - uint64_t sample:4; - uint64_t phase:8; -#else - uint64_t phase:8; - uint64_t sample:4; - uint64_t preamble:1; - uint64_t clk_idle:1; - uint64_t reserved_14_14:1; - uint64_t sample_mode:1; - uint64_t sample_hi:5; - uint64_t reserved_21_23:3; - uint64_t mode:1; - uint64_t reserved_25_63:39; -#endif - } s; - struct cvmx_smix_clk_cn30xx { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_21_63:43; - uint64_t sample_hi:5; - uint64_t sample_mode:1; - uint64_t reserved_14_14:1; - uint64_t clk_idle:1; - uint64_t preamble:1; - uint64_t sample:4; - uint64_t phase:8; -#else - uint64_t phase:8; - uint64_t sample:4; - uint64_t preamble:1; - uint64_t clk_idle:1; - uint64_t reserved_14_14:1; - uint64_t sample_mode:1; - uint64_t sample_hi:5; - uint64_t reserved_21_63:43; -#endif - } cn30xx; -}; - -union cvmx_smix_cmd { - uint64_t u64; - struct cvmx_smix_cmd_s { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_18_63:46; - uint64_t phy_op:2; - uint64_t reserved_13_15:3; - uint64_t phy_adr:5; - uint64_t reserved_5_7:3; - uint64_t reg_adr:5; -#else - uint64_t reg_adr:5; - uint64_t reserved_5_7:3; - uint64_t phy_adr:5; - uint64_t reserved_13_15:3; - uint64_t phy_op:2; - uint64_t reserved_18_63:46; -#endif - } s; - struct cvmx_smix_cmd_cn30xx { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_17_63:47; - uint64_t phy_op:1; - uint64_t reserved_13_15:3; - uint64_t phy_adr:5; - uint64_t reserved_5_7:3; - uint64_t reg_adr:5; -#else - uint64_t reg_adr:5; - uint64_t reserved_5_7:3; - uint64_t phy_adr:5; - uint64_t reserved_13_15:3; - uint64_t phy_op:1; - uint64_t reserved_17_63:47; -#endif - } cn30xx; -}; - -union cvmx_smix_en { - uint64_t u64; - struct cvmx_smix_en_s { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_1_63:63; - uint64_t en:1; -#else - uint64_t en:1; - uint64_t reserved_1_63:63; -#endif - } s; -}; - -union cvmx_smix_rd_dat { - uint64_t u64; - struct cvmx_smix_rd_dat_s { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_18_63:46; - uint64_t pending:1; - uint64_t val:1; - uint64_t dat:16; -#else - uint64_t dat:16; - uint64_t val:1; - uint64_t pending:1; - uint64_t reserved_18_63:46; -#endif - } s; -}; - -union cvmx_smix_wr_dat { - uint64_t u64; - struct cvmx_smix_wr_dat_s { -#ifdef __BIG_ENDIAN_BITFIELD - uint64_t reserved_18_63:46; - uint64_t pending:1; - uint64_t val:1; - uint64_t dat:16; -#else - uint64_t dat:16; - uint64_t val:1; - uint64_t pending:1; - uint64_t reserved_18_63:46; -#endif - } s; -}; - -#endif diff --git a/arch/mips/include/asm/pci/bridge.h b/arch/mips/include/asm/pci/bridge.h index 3206245d1ed6..23574c27eb40 100644 --- a/arch/mips/include/asm/pci/bridge.h +++ b/arch/mips/include/asm/pci/bridge.h @@ -45,18 +45,21 @@ #ifndef __ASSEMBLY__ -/* - * All accesses to bridge hardware registers must be done - * using 32-bit loads and stores. - */ -typedef u32 bridgereg_t; +#define ATE_V 0x01 +#define ATE_CO 0x02 +#define ATE_PREC 0x04 +#define ATE_PREF 0x08 +#define ATE_BAR 0x10 + +#define ATE_PFNSHIFT 12 +#define ATE_TIDSHIFT 8 +#define ATE_RMFSHIFT 48 -typedef u64 bridge_ate_t; +#define mkate(xaddr, xid, attr) (((xaddr) & 0x0000fffffffff000ULL) | \ + ((xid)<<ATE_TIDSHIFT) | \ + (attr)) -/* pointers to bridge ATEs - * are always "pointer to volatile" - */ -typedef volatile bridge_ate_t *bridge_ate_p; +#define BRIDGE_INTERNAL_ATES 128 /* * It is generally preferred that hardware registers on the bridge @@ -65,7 +68,7 @@ typedef volatile bridge_ate_t *bridge_ate_p; * Generated from Bridge spec dated 04oct95 */ -typedef volatile struct bridge_s { +struct bridge_regs { /* Local Registers 0x000000-0x00FFFF */ /* standard widget configuration 0x000000-0x000057 */ @@ -86,105 +89,105 @@ typedef volatile struct bridge_s { #define b_wid_tflush b_widget.w_tflush /* bridge-specific widget configuration 0x000058-0x00007F */ - bridgereg_t _pad_000058; - bridgereg_t b_wid_aux_err; /* 0x00005C */ - bridgereg_t _pad_000060; - bridgereg_t b_wid_resp_upper; /* 0x000064 */ - bridgereg_t _pad_000068; - bridgereg_t b_wid_resp_lower; /* 0x00006C */ - bridgereg_t _pad_000070; - bridgereg_t b_wid_tst_pin_ctrl; /* 0x000074 */ - bridgereg_t _pad_000078[2]; + u32 _pad_000058; + u32 b_wid_aux_err; /* 0x00005C */ + u32 _pad_000060; + u32 b_wid_resp_upper; /* 0x000064 */ + u32 _pad_000068; + u32 b_wid_resp_lower; /* 0x00006C */ + u32 _pad_000070; + u32 b_wid_tst_pin_ctrl; /* 0x000074 */ + u32 _pad_000078[2]; /* PMU & Map 0x000080-0x00008F */ - bridgereg_t _pad_000080; - bridgereg_t b_dir_map; /* 0x000084 */ - bridgereg_t _pad_000088[2]; + u32 _pad_000080; + u32 b_dir_map; /* 0x000084 */ + u32 _pad_000088[2]; /* SSRAM 0x000090-0x00009F */ - bridgereg_t _pad_000090; - bridgereg_t b_ram_perr; /* 0x000094 */ - bridgereg_t _pad_000098[2]; + u32 _pad_000090; + u32 b_ram_perr; /* 0x000094 */ + u32 _pad_000098[2]; /* Arbitration 0x0000A0-0x0000AF */ - bridgereg_t _pad_0000A0; - bridgereg_t b_arb; /* 0x0000A4 */ - bridgereg_t _pad_0000A8[2]; + u32 _pad_0000A0; + u32 b_arb; /* 0x0000A4 */ + u32 _pad_0000A8[2]; /* Number In A Can 0x0000B0-0x0000BF */ - bridgereg_t _pad_0000B0; - bridgereg_t b_nic; /* 0x0000B4 */ - bridgereg_t _pad_0000B8[2]; + u32 _pad_0000B0; + u32 b_nic; /* 0x0000B4 */ + u32 _pad_0000B8[2]; /* PCI/GIO 0x0000C0-0x0000FF */ - bridgereg_t _pad_0000C0; - bridgereg_t b_bus_timeout; /* 0x0000C4 */ + u32 _pad_0000C0; + u32 b_bus_timeout; /* 0x0000C4 */ #define b_pci_bus_timeout b_bus_timeout - bridgereg_t _pad_0000C8; - bridgereg_t b_pci_cfg; /* 0x0000CC */ - bridgereg_t _pad_0000D0; - bridgereg_t b_pci_err_upper; /* 0x0000D4 */ - bridgereg_t _pad_0000D8; - bridgereg_t b_pci_err_lower; /* 0x0000DC */ - bridgereg_t _pad_0000E0[8]; + u32 _pad_0000C8; + u32 b_pci_cfg; /* 0x0000CC */ + u32 _pad_0000D0; + u32 b_pci_err_upper; /* 0x0000D4 */ + u32 _pad_0000D8; + u32 b_pci_err_lower; /* 0x0000DC */ + u32 _pad_0000E0[8]; #define b_gio_err_lower b_pci_err_lower #define b_gio_err_upper b_pci_err_upper /* Interrupt 0x000100-0x0001FF */ - bridgereg_t _pad_000100; - bridgereg_t b_int_status; /* 0x000104 */ - bridgereg_t _pad_000108; - bridgereg_t b_int_enable; /* 0x00010C */ - bridgereg_t _pad_000110; - bridgereg_t b_int_rst_stat; /* 0x000114 */ - bridgereg_t _pad_000118; - bridgereg_t b_int_mode; /* 0x00011C */ - bridgereg_t _pad_000120; - bridgereg_t b_int_device; /* 0x000124 */ - bridgereg_t _pad_000128; - bridgereg_t b_int_host_err; /* 0x00012C */ + u32 _pad_000100; + u32 b_int_status; /* 0x000104 */ + u32 _pad_000108; + u32 b_int_enable; /* 0x00010C */ + u32 _pad_000110; + u32 b_int_rst_stat; /* 0x000114 */ + u32 _pad_000118; + u32 b_int_mode; /* 0x00011C */ + u32 _pad_000120; + u32 b_int_device; /* 0x000124 */ + u32 _pad_000128; + u32 b_int_host_err; /* 0x00012C */ struct { - bridgereg_t __pad; /* 0x0001{30,,,68} */ - bridgereg_t addr; /* 0x0001{34,,,6C} */ + u32 __pad; /* 0x0001{30,,,68} */ + u32 addr; /* 0x0001{34,,,6C} */ } b_int_addr[8]; /* 0x000130 */ - bridgereg_t _pad_000170[36]; + u32 _pad_000170[36]; /* Device 0x000200-0x0003FF */ struct { - bridgereg_t __pad; /* 0x0002{00,,,38} */ - bridgereg_t reg; /* 0x0002{04,,,3C} */ + u32 __pad; /* 0x0002{00,,,38} */ + u32 reg; /* 0x0002{04,,,3C} */ } b_device[8]; /* 0x000200 */ struct { - bridgereg_t __pad; /* 0x0002{40,,,78} */ - bridgereg_t reg; /* 0x0002{44,,,7C} */ + u32 __pad; /* 0x0002{40,,,78} */ + u32 reg; /* 0x0002{44,,,7C} */ } b_wr_req_buf[8]; /* 0x000240 */ struct { - bridgereg_t __pad; /* 0x0002{80,,,88} */ - bridgereg_t reg; /* 0x0002{84,,,8C} */ + u32 __pad; /* 0x0002{80,,,88} */ + u32 reg; /* 0x0002{84,,,8C} */ } b_rrb_map[2]; /* 0x000280 */ #define b_even_resp b_rrb_map[0].reg /* 0x000284 */ #define b_odd_resp b_rrb_map[1].reg /* 0x00028C */ - bridgereg_t _pad_000290; - bridgereg_t b_resp_status; /* 0x000294 */ - bridgereg_t _pad_000298; - bridgereg_t b_resp_clear; /* 0x00029C */ + u32 _pad_000290; + u32 b_resp_status; /* 0x000294 */ + u32 _pad_000298; + u32 b_resp_clear; /* 0x00029C */ - bridgereg_t _pad_0002A0[24]; + u32 _pad_0002A0[24]; char _pad_000300[0x10000 - 0x000300]; /* Internal Address Translation Entry RAM 0x010000-0x0103FF */ union { - bridge_ate_t wr; /* write-only */ + u64 wr; /* write-only */ struct { - bridgereg_t _p_pad; - bridgereg_t rd; /* read-only */ + u32 _p_pad; + u32 rd; /* read-only */ } hi; } b_int_ate_ram[128]; @@ -192,8 +195,8 @@ typedef volatile struct bridge_s { /* Internal Address Translation Entry RAM LOW 0x011000-0x0113FF */ struct { - bridgereg_t _p_pad; - bridgereg_t rd; /* read-only */ + u32 _p_pad; + u32 rd; /* read-only */ } b_int_ate_ram_lo[128]; char _pad_011400[0x20000 - 0x011400]; @@ -212,7 +215,7 @@ typedef volatile struct bridge_s { } f[8]; } b_type0_cfg_dev[8]; /* 0x020000 */ - /* PCI Type 1 Configuration Space 0x028000-0x028FFF */ + /* PCI Type 1 Configuration Space 0x028000-0x028FFF */ union { /* make all access sizes available. */ u8 c[0x1000 / 1]; u16 s[0x1000 / 2]; @@ -233,7 +236,7 @@ typedef volatile struct bridge_s { u8 _pad_030007[0x04fff8]; /* 0x030008-0x07FFFF */ /* External Address Translation Entry RAM 0x080000-0x0FFFFF */ - bridge_ate_t b_ext_ate_ram[0x10000]; + u64 b_ext_ate_ram[0x10000]; /* Reserved 0x100000-0x1FFFFF */ char _pad_100000[0x200000-0x100000]; @@ -259,13 +262,13 @@ typedef volatile struct bridge_s { u32 l[0x400000 / 4]; /* read-only */ u64 d[0x400000 / 8]; /* read-only */ } b_external_flash; /* 0xC00000 */ -} bridge_t; +}; /* * Field formats for Error Command Word and Auxiliary Error Command Word * of bridge. */ -typedef struct bridge_err_cmdword_s { +struct bridge_err_cmdword { union { u32 cmd_word; struct { @@ -282,7 +285,7 @@ typedef struct bridge_err_cmdword_s { rsvd:8; } berr_st; } berr_un; -} bridge_err_cmdword_t; +}; #define berr_field berr_un.berr_st #endif /* !__ASSEMBLY__ */ @@ -290,7 +293,7 @@ typedef struct bridge_err_cmdword_s { /* * The values of these macros can and should be crosschecked * regularly against the offsets of the like-named fields - * within the "bridge_t" structure above. + * within the bridge_regs structure above. */ /* Byte offset macros for Bridge internal registers */ @@ -797,49 +800,14 @@ typedef struct bridge_err_cmdword_s { #define PCI64_ATTR_RMF_MASK 0x00ff000000000000 #define PCI64_ATTR_RMF_SHFT 48 -#ifndef __ASSEMBLY__ -/* Address translation entry for mapped pci32 accesses */ -typedef union ate_u { - u64 ent; - struct ate_s { - u64 rmf:16; - u64 addr:36; - u64 targ:4; - u64 reserved:3; - u64 barrier:1; - u64 prefetch:1; - u64 precise:1; - u64 coherent:1; - u64 valid:1; - } field; -} ate_t; -#endif /* !__ASSEMBLY__ */ - -#define ATE_V 0x01 -#define ATE_CO 0x02 -#define ATE_PREC 0x04 -#define ATE_PREF 0x08 -#define ATE_BAR 0x10 - -#define ATE_PFNSHIFT 12 -#define ATE_TIDSHIFT 8 -#define ATE_RMFSHIFT 48 - -#define mkate(xaddr, xid, attr) ((xaddr) & 0x0000fffffffff000ULL) | \ - ((xid)<<ATE_TIDSHIFT) | \ - (attr) - -#define BRIDGE_INTERNAL_ATES 128 - struct bridge_controller { struct pci_controller pc; struct resource mem; struct resource io; struct resource busn; - bridge_t *base; + struct bridge_regs *base; nasid_t nasid; unsigned int widget_id; - unsigned int irq_cpu; u64 baddr; unsigned int pci_int[8]; }; @@ -847,8 +815,14 @@ struct bridge_controller { #define BRIDGE_CONTROLLER(bus) \ ((struct bridge_controller *)((bus)->sysdata)) -extern void register_bridge_irq(unsigned int irq); -extern int request_bridge_irq(struct bridge_controller *bc); +#define bridge_read(bc, reg) __raw_readl(&bc->base->reg) +#define bridge_write(bc, reg, val) __raw_writel(val, &bc->base->reg) +#define bridge_set(bc, reg, val) \ + __raw_writel(__raw_readl(&bc->base->reg) | (val), &bc->base->reg) +#define bridge_clr(bc, reg, val) \ + __raw_writel(__raw_readl(&bc->base->reg) & ~(val), &bc->base->reg) + +extern int request_bridge_irq(struct bridge_controller *bc, int pin); extern struct pci_ops bridge_pci_ops; diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 910851c62db3..4ccb465ef3f2 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -17,6 +17,7 @@ #include <asm/pgtable-64.h> #endif +#include <asm/cmpxchg.h> #include <asm/io.h> #include <asm/pgtable-bits.h> @@ -204,51 +205,11 @@ static inline void set_pte(pte_t *ptep, pte_t pteval) * Make sure the buddy is global too (if it's !none, * it better already be global) */ -#ifdef CONFIG_SMP - /* - * For SMP, multiple CPUs can race, so we need to do - * this atomically. - */ - unsigned long page_global = _PAGE_GLOBAL; - unsigned long tmp; - - if (kernel_uses_llsc && R10000_LLSC_WAR) { - __asm__ __volatile__ ( - " .set push \n" - " .set arch=r4000 \n" - " .set noreorder \n" - "1:" __LL "%[tmp], %[buddy] \n" - " bnez %[tmp], 2f \n" - " or %[tmp], %[tmp], %[global] \n" - __SC "%[tmp], %[buddy] \n" - " beqzl %[tmp], 1b \n" - " nop \n" - "2: \n" - " .set pop \n" - : [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp) - : [global] "r" (page_global)); - } else if (kernel_uses_llsc) { - loongson_llsc_mb(); - __asm__ __volatile__ ( - " .set push \n" - " .set "MIPS_ISA_ARCH_LEVEL" \n" - " .set noreorder \n" - "1:" __LL "%[tmp], %[buddy] \n" - " bnez %[tmp], 2f \n" - " or %[tmp], %[tmp], %[global] \n" - __SC "%[tmp], %[buddy] \n" - " beqz %[tmp], 1b \n" - " nop \n" - "2: \n" - " .set pop \n" - : [buddy] "+m" (buddy->pte), [tmp] "=&r" (tmp) - : [global] "r" (page_global)); - loongson_llsc_mb(); - } -#else /* !CONFIG_SMP */ - if (pte_none(*buddy)) - pte_val(*buddy) = pte_val(*buddy) | _PAGE_GLOBAL; -#endif /* CONFIG_SMP */ +# if defined(CONFIG_PHYS_ADDR_T_64BIT) && !defined(CONFIG_CPU_MIPS32) + cmpxchg64(&buddy->pte, 0, _PAGE_GLOBAL); +# else + cmpxchg(&buddy->pte, 0, _PAGE_GLOBAL); +# endif } #endif } diff --git a/arch/mips/include/asm/smp-ops.h b/arch/mips/include/asm/smp-ops.h index b7123f9c0785..65618ff1280c 100644 --- a/arch/mips/include/asm/smp-ops.h +++ b/arch/mips/include/asm/smp-ops.h @@ -29,6 +29,7 @@ struct plat_smp_ops { int (*boot_secondary)(int cpu, struct task_struct *idle); void (*smp_setup)(void); void (*prepare_cpus)(unsigned int max_cpus); + void (*prepare_boot_cpu)(void); #ifdef CONFIG_HOTPLUG_CPU int (*cpu_disable)(void); void (*cpu_die)(unsigned int cpu); diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h index 66814f8ba8e8..837d23e24976 100644 --- a/arch/mips/include/asm/sn/addrs.h +++ b/arch/mips/include/asm/sn/addrs.h @@ -27,16 +27,11 @@ #ifndef __ASSEMBLY__ -#define PS_UINT_CAST (unsigned long) #define UINT64_CAST (unsigned long) -#define HUBREG_CAST (volatile hubreg_t *) - #else /* __ASSEMBLY__ */ -#define PS_UINT_CAST #define UINT64_CAST -#define HUBREG_CAST #endif /* __ASSEMBLY__ */ @@ -256,42 +251,23 @@ * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S(). * They're always safe. */ -#define LOCAL_HUB_ADDR(_x) (HUBREG_CAST (IALIAS_BASE + (_x))) -#define REMOTE_HUB_ADDR(_n, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#ifdef CONFIG_SGI_IP27 -#define REMOTE_HUB_PI_ADDR(_n, _sn, _x) (HUBREG_CAST (NODE_SWIN_BASE(_n, 1) + \ - 0x800000 + (_x))) -#endif /* CONFIG_SGI_IP27 */ +#define LOCAL_HUB_ADDR(_x) (IALIAS_BASE + (_x)) +#define REMOTE_HUB_ADDR(_n, _x) ((NODE_SWIN_BASE(_n, 1) + 0x800000 + (_x))) #ifndef __ASSEMBLY__ -#define HUB_L(_a) *(_a) -#define HUB_S(_a, _d) *(_a) = (_d) +#define LOCAL_HUB_PTR(_x) ((u64 *)LOCAL_HUB_ADDR((_x))) +#define REMOTE_HUB_PTR(_n, _x) ((u64 *)REMOTE_HUB_ADDR((_n), (_x))) -#define LOCAL_HUB_L(_r) HUB_L(LOCAL_HUB_ADDR(_r)) -#define LOCAL_HUB_S(_r, _d) HUB_S(LOCAL_HUB_ADDR(_r), (_d)) -#define REMOTE_HUB_L(_n, _r) HUB_L(REMOTE_HUB_ADDR((_n), (_r))) -#define REMOTE_HUB_S(_n, _r, _d) HUB_S(REMOTE_HUB_ADDR((_n), (_r)), (_d)) -#define REMOTE_HUB_PI_L(_n, _sn, _r) HUB_L(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r))) -#define REMOTE_HUB_PI_S(_n, _sn, _r, _d) HUB_S(REMOTE_HUB_PI_ADDR((_n), (_sn), (_r)), (_d)) +#define LOCAL_HUB_L(_r) __raw_readq(LOCAL_HUB_PTR(_r)) +#define LOCAL_HUB_S(_r, _d) __raw_writeq((_d), LOCAL_HUB_PTR(_r)) +#define REMOTE_HUB_L(_n, _r) __raw_readq(REMOTE_HUB_PTR((_n), (_r))) +#define REMOTE_HUB_S(_n, _r, _d) __raw_writeq((_d), \ + REMOTE_HUB_PTR((_n), (_r))) #endif /* !__ASSEMBLY__ */ /* - * The following macros are used to get to a hub/bridge register, given - * the base of the register space. - */ -#define HUB_REG_PTR(_base, _off) \ - (HUBREG_CAST((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) - -#define HUB_REG_PTR_L(_base, _off) \ - HUB_L(HUB_REG_PTR((_base), (_off))) - -#define HUB_REG_PTR_S(_base, _off, _data) \ - HUB_S(HUB_REG_PTR((_base), (_off)), (_data)) - -/* * Software structure locations -- permanently fixed * See diagram in kldir.h */ @@ -387,44 +363,14 @@ #define SYMMON_STK_END(nasid) (SYMMON_STK_ADDR(nasid, 0) + KLD_SYMMON_STK(nasid)->size) -/* loading symmon 4k below UNIX. the arcs loader needs the topaddr for a - * relocatable program - */ -#define UNIX_DEBUG_LOADADDR 0x300000 -#define SYMMON_LOADADDR(nasid) \ - TO_NODE(nasid, PHYS_TO_K0(UNIX_DEBUG_LOADADDR - 0x1000)) - -#define FREEMEM_OFFSET(nasid) KLD_FREEMEM(nasid)->offset -#define FREEMEM_ADDR(nasid) SYMMON_STK_END(nasid) -/* - * XXX - * Fix this. FREEMEM_ADDR should be aware of if symmon is loaded. - * Also, it should take into account what prom thinks to be a safe - * address - PHYS_TO_K0(NODE_OFFSET(nasid) + FREEMEM_OFFSET(nasid)) - */ -#define FREEMEM_SIZE(nasid) KLD_FREEMEM(nasid)->size - -#define PI_ERROR_OFFSET(nasid) KLD_PI_ERROR(nasid)->offset -#define PI_ERROR_ADDR(nasid) \ - TO_NODE_UNCAC((nasid), PI_ERROR_OFFSET(nasid)) -#define PI_ERROR_SIZE(nasid) KLD_PI_ERROR(nasid)->size - #define NODE_OFFSET_TO_K0(_nasid, _off) \ PHYS_TO_K0((NODE_OFFSET(_nasid) + (_off)) | CAC_BASE) #define NODE_OFFSET_TO_K1(_nasid, _off) \ TO_UNCAC((NODE_OFFSET(_nasid) + (_off)) | UNCAC_BASE) -#define K0_TO_NODE_OFFSET(_k0addr) \ - ((__psunsigned_t)(_k0addr) & NODE_ADDRSPACE_MASK) #define KERN_VARS_ADDR(nasid) KLD_KERN_VARS(nasid)->pointer #define KERN_VARS_SIZE(nasid) KLD_KERN_VARS(nasid)->size -#define KERN_XP_ADDR(nasid) KLD_KERN_XP(nasid)->pointer -#define KERN_XP_SIZE(nasid) KLD_KERN_XP(nasid)->size - -#define GPDA_ADDR(nasid) TO_NODE_CAC(nasid, GPDA_OFFSET) - #endif /* !__ASSEMBLY__ */ diff --git a/arch/mips/include/asm/sn/arch.h b/arch/mips/include/asm/sn/arch.h index 471e6870d876..3f1fb1454749 100644 --- a/arch/mips/include/asm/sn/arch.h +++ b/arch/mips/include/asm/sn/arch.h @@ -17,8 +17,6 @@ #include <asm/sn/sn0/arch.h> #endif -typedef u64 hubreg_t; - #define cputonasid(cpu) (sn_cpu_info[(cpu)].p_nasid) #define cputoslice(cpu) (sn_cpu_info[(cpu)].p_slice) #define makespnum(_nasid, _slice) \ diff --git a/arch/mips/include/asm/sn/io.h b/arch/mips/include/asm/sn/io.h index d5174d04538c..211f1e83b523 100644 --- a/arch/mips/include/asm/sn/io.h +++ b/arch/mips/include/asm/sn/io.h @@ -44,7 +44,7 @@ IIO_ITTE_PUT((nasid), HUB_PIO_MAP_TO_MEM, \ (bigwin), IIO_ITTE_INVALID_WIDGET, 0) -#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_ADDR((nasid), IIO_ITTE(bigwin)) +#define IIO_ITTE_GET(nasid, bigwin) REMOTE_HUB_PTR((nasid), IIO_ITTE(bigwin)) /* * Macro which takes the widget number, and returns the diff --git a/arch/mips/include/asm/sn/sn0/addrs.h b/arch/mips/include/asm/sn/sn0/addrs.h index 6b53070f400f..f13df84edfdd 100644 --- a/arch/mips/include/asm/sn/sn0/addrs.h +++ b/arch/mips/include/asm/sn/sn0/addrs.h @@ -134,11 +134,6 @@ #define CALIAS_BASE CAC_BASE - - -#define BRIDGE_REG_PTR(_base, _off) ((volatile bridgereg_t *) \ - ((__psunsigned_t)(_base) + (__psunsigned_t)(_off))) - #define SN0_WIDGET_BASE(_nasid, _wid) (NODE_SWIN_BASE((_nasid), (_wid))) /* Turn on sable logging for the processors whose bits are set. */ diff --git a/arch/mips/include/asm/tlbflush.h b/arch/mips/include/asm/tlbflush.h index 40a361092491..9789e7a32def 100644 --- a/arch/mips/include/asm/tlbflush.h +++ b/arch/mips/include/asm/tlbflush.h @@ -14,7 +14,6 @@ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages */ extern void local_flush_tlb_all(void); -extern void local_flush_tlb_mm(struct mm_struct *mm); extern void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end); extern void local_flush_tlb_kernel_range(unsigned long start, @@ -23,6 +22,8 @@ extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page); extern void local_flush_tlb_one(unsigned long vaddr); +#include <asm/mmu_context.h> + #ifdef CONFIG_SMP extern void flush_tlb_all(void); @@ -36,7 +37,7 @@ extern void flush_tlb_one(unsigned long vaddr); #else /* CONFIG_SMP */ #define flush_tlb_all() local_flush_tlb_all() -#define flush_tlb_mm(mm) local_flush_tlb_mm(mm) +#define flush_tlb_mm(mm) drop_mmu_context(mm) #define flush_tlb_range(vma, vmaddr, end) local_flush_tlb_range(vma, vmaddr, end) #define flush_tlb_kernel_range(vmaddr,end) \ local_flush_tlb_kernel_range(vmaddr, end) diff --git a/arch/mips/jz4740/setup.c b/arch/mips/jz4740/setup.c index afb40f8bce96..7e63c54eb8d2 100644 --- a/arch/mips/jz4740/setup.c +++ b/arch/mips/jz4740/setup.c @@ -31,7 +31,6 @@ #define JZ4740_EMC_SDRAM_CTRL 0x80 - static void __init jz4740_detect_mem(void) { void __iomem *jz_emc_base; @@ -66,15 +65,22 @@ static unsigned long __init get_board_mach_type(const void *fdt) void __init plat_mem_setup(void) { int offset; + void *dtb; jz4740_reset_init(); - __dt_setup_arch(__dtb_start); - offset = fdt_path_offset(__dtb_start, "/memory"); + if (__dtb_start != __dtb_end) + dtb = __dtb_start; + else + dtb = (void *)fw_passed_dtb; + + __dt_setup_arch(dtb); + + offset = fdt_path_offset(dtb, "/memory"); if (offset < 0) jz4740_detect_mem(); - mips_machtype = get_board_mach_type(__dtb_start); + mips_machtype = get_board_mach_type(dtb); } void __init device_tree_init(void) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 95b18a194f53..d5e335e6846a 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -872,10 +872,19 @@ static inline unsigned int decode_config4(struct cpuinfo_mips *c) static inline unsigned int decode_config5(struct cpuinfo_mips *c) { - unsigned int config5; + unsigned int config5, max_mmid_width; + unsigned long asid_mask; config5 = read_c0_config5(); config5 &= ~(MIPS_CONF5_UFR | MIPS_CONF5_UFE); + + if (cpu_has_mips_r6) { + if (!__builtin_constant_p(cpu_has_mmid) || cpu_has_mmid) + config5 |= MIPS_CONF5_MI; + else + config5 &= ~MIPS_CONF5_MI; + } + write_c0_config5(config5); if (config5 & MIPS_CONF5_EVA) @@ -894,6 +903,50 @@ static inline unsigned int decode_config5(struct cpuinfo_mips *c) if (config5 & MIPS_CONF5_CRCP) elf_hwcap |= HWCAP_MIPS_CRC32; + if (cpu_has_mips_r6) { + /* Ensure the write to config5 above takes effect */ + back_to_back_c0_hazard(); + + /* Check whether we successfully enabled MMID support */ + config5 = read_c0_config5(); + if (config5 & MIPS_CONF5_MI) + c->options |= MIPS_CPU_MMID; + + /* + * Warn if we've hardcoded cpu_has_mmid to a value unsuitable + * for the CPU we're running on, or if CPUs in an SMP system + * have inconsistent MMID support. + */ + WARN_ON(!!cpu_has_mmid != !!(config5 & MIPS_CONF5_MI)); + + if (cpu_has_mmid) { + write_c0_memorymapid(~0ul); + back_to_back_c0_hazard(); + asid_mask = read_c0_memorymapid(); + + /* + * We maintain a bitmap to track MMID allocation, and + * need a sensible upper bound on the size of that + * bitmap. The initial CPU with MMID support (I6500) + * supports 16 bit MMIDs, which gives us an 8KiB + * bitmap. The architecture recommends that hardware + * support 32 bit MMIDs, which would give us a 512MiB + * bitmap - that's too big in most cases. + * + * Cap MMID width at 16 bits for now & we can revisit + * this if & when hardware supports anything wider. + */ + max_mmid_width = 16; + if (asid_mask > GENMASK(max_mmid_width - 1, 0)) { + pr_info("Capping MMID width at %d bits", + max_mmid_width); + asid_mask = GENMASK(max_mmid_width - 1, 0); + } + + set_cpu_asid_mask(c, asid_mask); + } + } + return config5 & MIPS_CONF_M; } diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index ba150c755fcc..85b6c60f285d 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -52,6 +52,7 @@ asmlinkage void spurious_interrupt(void) void __init init_IRQ(void) { int i; + unsigned int order = get_order(IRQ_STACK_SIZE); for (i = 0; i < NR_IRQS; i++) irq_set_noprobe(i); @@ -62,8 +63,7 @@ void __init init_IRQ(void) arch_init_irq(); for_each_possible_cpu(i) { - int irq_pages = IRQ_STACK_SIZE / PAGE_SIZE; - void *s = (void *)__get_free_pages(GFP_KERNEL, irq_pages); + void *s = (void *)__get_free_pages(GFP_KERNEL, order); irq_stack[i] = s; pr_debug("CPU%d IRQ stack at 0x%p - 0x%p\n", i, diff --git a/arch/mips/kernel/mips-cm.c b/arch/mips/kernel/mips-cm.c index 7f3f136572de..537e8d091874 100644 --- a/arch/mips/kernel/mips-cm.c +++ b/arch/mips/kernel/mips-cm.c @@ -382,8 +382,8 @@ void mips_cm_error_report(void) sc_bit ? "True" : "False", cm2_cmd[cmd_bits], sport_bits); } - pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, - cm2_causes[cause], buf); + pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error, + cm2_causes[cause], buf); pr_err("CM_ADDR =%08llx\n", cm_addr); pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]); } else { /* CM3 */ diff --git a/arch/mips/kernel/mips-r2-to-r6-emul.c b/arch/mips/kernel/mips-r2-to-r6-emul.c index c50c89a978f1..b4d210bfcdae 100644 --- a/arch/mips/kernel/mips-r2-to-r6-emul.c +++ b/arch/mips/kernel/mips-r2-to-r6-emul.c @@ -2351,23 +2351,10 @@ DEFINE_SHOW_ATTRIBUTE(mipsr2_clear); static int __init mipsr2_init_debugfs(void) { - struct dentry *mipsr2_emul; - - if (!mips_debugfs_dir) - return -ENODEV; - - mipsr2_emul = debugfs_create_file("r2_emul_stats", S_IRUGO, - mips_debugfs_dir, NULL, - &mipsr2_emul_fops); - if (!mipsr2_emul) - return -ENOMEM; - - mipsr2_emul = debugfs_create_file("r2_emul_stats_clear", S_IRUGO, - mips_debugfs_dir, NULL, - &mipsr2_clear_fops); - if (!mipsr2_emul) - return -ENOMEM; - + debugfs_create_file("r2_emul_stats", S_IRUGO, mips_debugfs_dir, NULL, + &mipsr2_emul_fops); + debugfs_create_file("r2_emul_stats_clear", S_IRUGO, mips_debugfs_dir, + NULL, &mipsr2_clear_fops); return 0; } diff --git a/arch/mips/kernel/segment.c b/arch/mips/kernel/segment.c index 2703f218202e..0a9bd7b0983b 100644 --- a/arch/mips/kernel/segment.c +++ b/arch/mips/kernel/segment.c @@ -95,18 +95,9 @@ static const struct file_operations segments_fops = { static int __init segments_info(void) { - struct dentry *segments; - - if (cpu_has_segments) { - if (!mips_debugfs_dir) - return -ENODEV; - - segments = debugfs_create_file("segments", S_IRUGO, - mips_debugfs_dir, NULL, - &segments_fops); - if (!segments) - return -ENOMEM; - } + if (cpu_has_segments) + debugfs_create_file("segments", S_IRUGO, mips_debugfs_dir, NULL, + &segments_fops); return 0; } diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index d2e5a5ad0e6f..5151532ad959 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -1011,12 +1011,7 @@ unsigned long fw_passed_dtb; struct dentry *mips_debugfs_dir; static int __init debugfs_mips(void) { - struct dentry *d; - - d = debugfs_create_dir("mips", NULL); - if (!d) - return -ENOMEM; - mips_debugfs_dir = d; + mips_debugfs_dir = debugfs_create_dir("mips", NULL); return 0; } arch_initcall(debugfs_mips); diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index d84b9066b465..bc4bb3c6bd00 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -39,6 +39,7 @@ #include <linux/atomic.h> #include <asm/cpu.h> +#include <asm/ginvt.h> #include <asm/processor.h> #include <asm/idle.h> #include <asm/r4k-timer.h> @@ -443,6 +444,8 @@ void __init smp_prepare_cpus(unsigned int max_cpus) /* preload SMP state for boot cpu */ void smp_prepare_boot_cpu(void) { + if (mp_ops->prepare_boot_cpu) + mp_ops->prepare_boot_cpu(); set_cpu_possible(0, true); set_cpu_online(0, true); } @@ -482,12 +485,21 @@ static void flush_tlb_all_ipi(void *info) void flush_tlb_all(void) { + if (cpu_has_mmid) { + htw_stop(); + ginvt_full(); + sync_ginv(); + instruction_hazard(); + htw_start(); + return; + } + on_each_cpu(flush_tlb_all_ipi, NULL, 1); } static void flush_tlb_mm_ipi(void *mm) { - local_flush_tlb_mm((struct mm_struct *)mm); + drop_mmu_context((struct mm_struct *)mm); } /* @@ -530,17 +542,22 @@ void flush_tlb_mm(struct mm_struct *mm) { preempt_disable(); - if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + if (cpu_has_mmid) { + /* + * No need to worry about other CPUs - the ginvt in + * drop_mmu_context() will be globalized. + */ + } else if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { smp_on_other_tlbs(flush_tlb_mm_ipi, mm); } else { unsigned int cpu; for_each_online_cpu(cpu) { if (cpu != smp_processor_id() && cpu_context(cpu, mm)) - cpu_context(cpu, mm) = 0; + set_cpu_context(cpu, mm, 0); } } - local_flush_tlb_mm(mm); + drop_mmu_context(mm); preempt_enable(); } @@ -561,9 +578,26 @@ static void flush_tlb_range_ipi(void *info) void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { struct mm_struct *mm = vma->vm_mm; + unsigned long addr; + u32 old_mmid; preempt_disable(); - if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { + if (cpu_has_mmid) { + htw_stop(); + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(cpu_asid(0, mm)); + mtc0_tlbw_hazard(); + addr = round_down(start, PAGE_SIZE * 2); + end = round_up(end, PAGE_SIZE * 2); + do { + ginvt_va_mmid(addr); + sync_ginv(); + addr += PAGE_SIZE * 2; + } while (addr < end); + write_c0_memorymapid(old_mmid); + instruction_hazard(); + htw_start(); + } else if ((atomic_read(&mm->mm_users) != 1) || (current->mm != mm)) { struct flush_tlb_data fd = { .vma = vma, .addr1 = start, @@ -571,6 +605,7 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned l }; smp_on_other_tlbs(flush_tlb_range_ipi, &fd); + local_flush_tlb_range(vma, start, end); } else { unsigned int cpu; int exec = vma->vm_flags & VM_EXEC; @@ -583,10 +618,10 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned l * mm has been completely unused by that CPU. */ if (cpu != smp_processor_id() && cpu_context(cpu, mm)) - cpu_context(cpu, mm) = !exec; + set_cpu_context(cpu, mm, !exec); } + local_flush_tlb_range(vma, start, end); } - local_flush_tlb_range(vma, start, end); preempt_enable(); } @@ -616,14 +651,28 @@ static void flush_tlb_page_ipi(void *info) void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) { + u32 old_mmid; + preempt_disable(); - if ((atomic_read(&vma->vm_mm->mm_users) != 1) || (current->mm != vma->vm_mm)) { + if (cpu_has_mmid) { + htw_stop(); + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(cpu_asid(0, vma->vm_mm)); + mtc0_tlbw_hazard(); + ginvt_va_mmid(page); + sync_ginv(); + write_c0_memorymapid(old_mmid); + instruction_hazard(); + htw_start(); + } else if ((atomic_read(&vma->vm_mm->mm_users) != 1) || + (current->mm != vma->vm_mm)) { struct flush_tlb_data fd = { .vma = vma, .addr1 = page, }; smp_on_other_tlbs(flush_tlb_page_ipi, &fd); + local_flush_tlb_page(vma, page); } else { unsigned int cpu; @@ -635,10 +684,10 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long page) * by that CPU. */ if (cpu != smp_processor_id() && cpu_context(cpu, vma->vm_mm)) - cpu_context(cpu, vma->vm_mm) = 1; + set_cpu_context(cpu, vma->vm_mm, 1); } + local_flush_tlb_page(vma, page); } - local_flush_tlb_page(vma, page); preempt_enable(); } diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c index eaed550e79a2..ab4e3e1b138d 100644 --- a/arch/mips/kernel/spinlock_test.c +++ b/arch/mips/kernel/spinlock_test.c @@ -118,23 +118,10 @@ DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n"); static int __init spinlock_test(void) { - struct dentry *d; - - if (!mips_debugfs_dir) - return -ENODEV; - - d = debugfs_create_file("spin_single", S_IRUGO, - mips_debugfs_dir, NULL, - &fops_ss); - if (!d) - return -ENOMEM; - - d = debugfs_create_file("spin_multi", S_IRUGO, - mips_debugfs_dir, NULL, - &fops_multi); - if (!d) - return -ENOMEM; - + debugfs_create_file("spin_single", S_IRUGO, mips_debugfs_dir, NULL, + &fops_ss); + debugfs_create_file("spin_multi", S_IRUGO, mips_debugfs_dir, NULL, + &fops_multi); return 0; } device_initcall(spinlock_test); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cbab46004e99..42d411125690 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -2223,7 +2223,9 @@ void per_cpu_trap_init(bool is_boot_cpu) cp0_fdc_irq = -1; } - if (!cpu_data[cpu].asid_cache) + if (cpu_has_mmid) + cpu_data[cpu].asid_cache = 0; + else if (!cpu_data[cpu].asid_cache) cpu_data[cpu].asid_cache = asid_first_version(cpu); mmgrab(&init_mm); diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c index 595ca9c85111..76e33f940971 100644 --- a/arch/mips/kernel/unaligned.c +++ b/arch/mips/kernel/unaligned.c @@ -89,6 +89,7 @@ #include <asm/fpu.h> #include <asm/fpu_emulator.h> #include <asm/inst.h> +#include <asm/mmu_context.h> #include <linux/uaccess.h> #define STR(x) __STR(x) @@ -2374,18 +2375,10 @@ sigbus: #ifdef CONFIG_DEBUG_FS static int __init debugfs_unaligned(void) { - struct dentry *d; - - if (!mips_debugfs_dir) - return -ENODEV; - d = debugfs_create_u32("unaligned_instructions", S_IRUGO, - mips_debugfs_dir, &unaligned_instructions); - if (!d) - return -ENOMEM; - d = debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, - mips_debugfs_dir, &unaligned_action); - if (!d) - return -ENOMEM; + debugfs_create_u32("unaligned_instructions", S_IRUGO, mips_debugfs_dir, + &unaligned_instructions); + debugfs_create_u32("unaligned_action", S_IRUGO | S_IWUSR, + mips_debugfs_dir, &unaligned_action); return 0; } arch_initcall(debugfs_unaligned); diff --git a/arch/mips/kvm/emulate.c b/arch/mips/kvm/emulate.c index ec9ed23bca7f..0074427b04fb 100644 --- a/arch/mips/kvm/emulate.c +++ b/arch/mips/kvm/emulate.c @@ -1016,10 +1016,10 @@ static void kvm_mips_change_entryhi(struct kvm_vcpu *vcpu, */ preempt_disable(); cpu = smp_processor_id(); - get_new_mmu_context(kern_mm, cpu); + get_new_mmu_context(kern_mm); for_each_possible_cpu(i) if (i != cpu) - cpu_context(i, kern_mm) = 0; + set_cpu_context(i, kern_mm, 0); preempt_enable(); } kvm_write_c0_guest_entryhi(cop0, entryhi); @@ -1090,8 +1090,8 @@ static void kvm_mips_invalidate_guest_tlb(struct kvm_vcpu *vcpu, if (i == cpu) continue; if (user) - cpu_context(i, user_mm) = 0; - cpu_context(i, kern_mm) = 0; + set_cpu_context(i, user_mm, 0); + set_cpu_context(i, kern_mm, 0); } preempt_enable(); diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c index 3734cd58895e..6d0517ac18e5 100644 --- a/arch/mips/kvm/mips.c +++ b/arch/mips/kvm/mips.c @@ -1723,6 +1723,11 @@ static int __init kvm_mips_init(void) { int ret; + if (cpu_has_mmid) { + pr_warn("KVM does not yet support MMIDs. KVM Disabled\n"); + return -EOPNOTSUPP; + } + ret = kvm_mips_entry_setup(); if (ret) return ret; diff --git a/arch/mips/kvm/trap_emul.c b/arch/mips/kvm/trap_emul.c index 6a0d7040d882..73daa6ad33af 100644 --- a/arch/mips/kvm/trap_emul.c +++ b/arch/mips/kvm/trap_emul.c @@ -1056,11 +1056,7 @@ static int kvm_trap_emul_vcpu_load(struct kvm_vcpu *vcpu, int cpu) */ if (current->flags & PF_VCPU) { mm = KVM_GUEST_KERNEL_MODE(vcpu) ? kern_mm : user_mm; - if ((cpu_context(cpu, mm) ^ asid_cache(cpu)) & - asid_version_mask(cpu)) - get_new_mmu_context(mm, cpu); - write_c0_entryhi(cpu_asid(cpu, mm)); - TLBMISS_HANDLER_SETUP_PGD(mm->pgd); + check_switch_mmu_context(mm); kvm_mips_suspend_mm(cpu); ehb(); } @@ -1074,11 +1070,7 @@ static int kvm_trap_emul_vcpu_put(struct kvm_vcpu *vcpu, int cpu) if (current->flags & PF_VCPU) { /* Restore normal Linux process memory map */ - if (((cpu_context(cpu, current->mm) ^ asid_cache(cpu)) & - asid_version_mask(cpu))) - get_new_mmu_context(current->mm, cpu); - write_c0_entryhi(cpu_asid(cpu, current->mm)); - TLBMISS_HANDLER_SETUP_PGD(current->mm->pgd); + check_switch_mmu_context(current->mm); kvm_mips_resume_mm(cpu); ehb(); } @@ -1106,14 +1098,14 @@ static void kvm_trap_emul_check_requests(struct kvm_vcpu *vcpu, int cpu, kvm_mips_flush_gva_pt(kern_mm->pgd, KMF_GPA | KMF_KERN); kvm_mips_flush_gva_pt(user_mm->pgd, KMF_GPA | KMF_USER); for_each_possible_cpu(i) { - cpu_context(i, kern_mm) = 0; - cpu_context(i, user_mm) = 0; + set_cpu_context(i, kern_mm, 0); + set_cpu_context(i, user_mm, 0); } /* Generate new ASID for current mode */ if (reload_asid) { mm = KVM_GUEST_KERNEL_MODE(vcpu) ? kern_mm : user_mm; - get_new_mmu_context(mm, cpu); + get_new_mmu_context(mm); htw_stop(); write_c0_entryhi(cpu_asid(cpu, mm)); TLBMISS_HANDLER_SETUP_PGD(mm->pgd); @@ -1219,7 +1211,7 @@ static void kvm_trap_emul_vcpu_reenter(struct kvm_run *run, if (gasid != vcpu->arch.last_user_gasid) { kvm_mips_flush_gva_pt(user_mm->pgd, KMF_USER); for_each_possible_cpu(i) - cpu_context(i, user_mm) = 0; + set_cpu_context(i, user_mm, 0); vcpu->arch.last_user_gasid = gasid; } } @@ -1228,9 +1220,7 @@ static void kvm_trap_emul_vcpu_reenter(struct kvm_run *run, * Check if ASID is stale. This may happen due to a TLB flush request or * a lazy user MM invalidation. */ - if ((cpu_context(cpu, mm) ^ asid_cache(cpu)) & - asid_version_mask(cpu)) - get_new_mmu_context(mm, cpu); + check_mmu_context(mm); } static int kvm_trap_emul_vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu) @@ -1266,11 +1256,7 @@ static int kvm_trap_emul_vcpu_run(struct kvm_run *run, struct kvm_vcpu *vcpu) cpu = smp_processor_id(); /* Restore normal Linux process memory map */ - if (((cpu_context(cpu, current->mm) ^ asid_cache(cpu)) & - asid_version_mask(cpu))) - get_new_mmu_context(current->mm, cpu); - write_c0_entryhi(cpu_asid(cpu, current->mm)); - TLBMISS_HANDLER_SETUP_PGD(current->mm->pgd); + check_switch_mmu_context(current->mm); kvm_mips_resume_mm(cpu); htw_start(); diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c index 74805035edc8..dde20887a70d 100644 --- a/arch/mips/kvm/vz.c +++ b/arch/mips/kvm/vz.c @@ -2454,10 +2454,10 @@ static void kvm_vz_vcpu_load_tlb(struct kvm_vcpu *vcpu, int cpu) * Root ASID dealiases guest GPA mappings in the root TLB. * Allocate new root ASID if needed. */ - if (cpumask_test_and_clear_cpu(cpu, &kvm->arch.asid_flush_mask) - || (cpu_context(cpu, gpa_mm) ^ asid_cache(cpu)) & - asid_version_mask(cpu)) - get_new_mmu_context(gpa_mm, cpu); + if (cpumask_test_and_clear_cpu(cpu, &kvm->arch.asid_flush_mask)) + get_new_mmu_context(gpa_mm); + else + check_mmu_context(gpa_mm); } } diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 188de95d6dbd..6c6802e482c9 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -52,8 +52,4 @@ config PCI_LANTIQ bool "PCI Support" depends on SOC_XWAY && PCI -config XRX200_PHY_FW - bool "XRX200 PHY firmware loader" - depends on SOC_XWAY - endif diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c index 781ad96b78c4..83ed37298e66 100644 --- a/arch/mips/lib/dump_tlb.c +++ b/arch/mips/lib/dump_tlb.c @@ -10,6 +10,7 @@ #include <asm/hazards.h> #include <asm/mipsregs.h> +#include <asm/mmu_context.h> #include <asm/page.h> #include <asm/pgtable.h> #include <asm/tlbdebug.h> @@ -73,12 +74,13 @@ static inline const char *msk2str(unsigned int mask) static void dump_tlb(int first, int last) { - unsigned long s_entryhi, entryhi, asid; + unsigned long s_entryhi, entryhi, asid, mmid; unsigned long long entrylo0, entrylo1, pa; unsigned int s_index, s_pagemask, s_guestctl1 = 0; unsigned int pagemask, guestctl1 = 0, c0, c1, i; unsigned long asidmask = cpu_asid_mask(¤t_cpu_data); int asidwidth = DIV_ROUND_UP(ilog2(asidmask) + 1, 4); + unsigned long uninitialized_var(s_mmid); #ifdef CONFIG_32BIT bool xpa = cpu_has_xpa && (read_c0_pagegrain() & PG_ELPA); int pwidth = xpa ? 11 : 8; @@ -92,7 +94,12 @@ static void dump_tlb(int first, int last) s_pagemask = read_c0_pagemask(); s_entryhi = read_c0_entryhi(); s_index = read_c0_index(); - asid = s_entryhi & asidmask; + + if (cpu_has_mmid) + asid = s_mmid = read_c0_memorymapid(); + else + asid = s_entryhi & asidmask; + if (cpu_has_guestid) s_guestctl1 = read_c0_guestctl1(); @@ -105,6 +112,12 @@ static void dump_tlb(int first, int last) entryhi = read_c0_entryhi(); entrylo0 = read_c0_entrylo0(); entrylo1 = read_c0_entrylo1(); + + if (cpu_has_mmid) + mmid = read_c0_memorymapid(); + else + mmid = entryhi & asidmask; + if (cpu_has_guestid) guestctl1 = read_c0_guestctl1(); @@ -124,8 +137,7 @@ static void dump_tlb(int first, int last) * leave only a single G bit set after a machine check exception * due to duplicate TLB entry. */ - if (!((entrylo0 | entrylo1) & ENTRYLO_G) && - (entryhi & asidmask) != asid) + if (!((entrylo0 | entrylo1) & ENTRYLO_G) && (mmid != asid)) continue; /* @@ -138,7 +150,7 @@ static void dump_tlb(int first, int last) pr_cont("va=%0*lx asid=%0*lx", vwidth, (entryhi & ~0x1fffUL), - asidwidth, entryhi & asidmask); + asidwidth, mmid); if (cpu_has_guestid) pr_cont(" gid=%02lx", (guestctl1 & MIPS_GCTL1_RID) diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig index 462b126f45aa..6dacc1438906 100644 --- a/arch/mips/loongson32/Kconfig +++ b/arch/mips/loongson32/Kconfig @@ -15,7 +15,6 @@ config LOONGSON1_LS1B select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_MIPS16 select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 select COMMON_CLK @@ -31,7 +30,6 @@ config LOONGSON1_LS1C select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_MIPS16 select SYS_HAS_EARLY_PRINTK select USE_GENERIC_EARLY_PRINTK_8250 select COMMON_CLK diff --git a/arch/mips/loongson32/Platform b/arch/mips/loongson32/Platform index a0dbb3b2f2de..333215593092 100644 --- a/arch/mips/loongson32/Platform +++ b/arch/mips/loongson32/Platform @@ -1,4 +1,4 @@ -cflags-$(CONFIG_CPU_LOONGSON1) += -march=mips32 -Wa,--trap +cflags-$(CONFIG_CPU_LOONGSON1) += -march=mips32r2 -Wa,--trap platform-$(CONFIG_MACH_LOONGSON32) += loongson32/ cflags-$(CONFIG_MACH_LOONGSON32) += -I$(srctree)/arch/mips/include/asm/mach-loongson32 -load-$(CONFIG_CPU_LOONGSON1) += 0xffffffff80100000 +load-$(CONFIG_CPU_LOONGSON1) += 0xffffffff80200000 diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c index ac584c5823d0..0bf355c8bcb2 100644 --- a/arch/mips/loongson32/common/platform.c +++ b/arch/mips/loongson32/common/platform.c @@ -81,42 +81,6 @@ struct platform_device ls1x_cpufreq_pdev = { }, }; -/* DMA */ -static struct resource ls1x_dma_resources[] = { - [0] = { - .start = LS1X_DMAC_BASE, - .end = LS1X_DMAC_BASE + SZ_4 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = LS1X_DMA0_IRQ, - .end = LS1X_DMA0_IRQ, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = LS1X_DMA1_IRQ, - .end = LS1X_DMA1_IRQ, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = LS1X_DMA2_IRQ, - .end = LS1X_DMA2_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device ls1x_dma_pdev = { - .name = "ls1x-dma", - .id = -1, - .num_resources = ARRAY_SIZE(ls1x_dma_resources), - .resource = ls1x_dma_resources, -}; - -void __init ls1x_dma_set_platdata(struct plat_ls1x_dma *pdata) -{ - ls1x_dma_pdev.dev.platform_data = pdata; -} - /* Synopsys Ethernet GMAC */ static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = { .phy_mask = 0, @@ -291,33 +255,6 @@ struct platform_device ls1x_gpio1_pdev = { .resource = ls1x_gpio1_resources, }; -/* NAND Flash */ -static struct resource ls1x_nand_resources[] = { - [0] = { - .start = LS1X_NAND_BASE, - .end = LS1X_NAND_BASE + SZ_32 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - /* DMA channel 0 is dedicated to NAND */ - .start = LS1X_DMA_CHANNEL0, - .end = LS1X_DMA_CHANNEL0, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device ls1x_nand_pdev = { - .name = "ls1x-nand", - .id = -1, - .num_resources = ARRAY_SIZE(ls1x_nand_resources), - .resource = ls1x_nand_resources, -}; - -void __init ls1x_nand_set_platdata(struct plat_ls1x_nand *pdata) -{ - ls1x_nand_pdev.dev.platform_data = pdata; -} - /* USB EHCI */ static u64 ls1x_ehci_dmamask = DMA_BIT_MASK(32); diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c index 01aceaace314..447b15fc0a2b 100644 --- a/arch/mips/loongson32/ls1b/board.c +++ b/arch/mips/loongson32/ls1b/board.c @@ -16,30 +16,6 @@ #include <nand.h> #include <platform.h> -struct plat_ls1x_dma ls1x_dma_pdata = { - .nr_channels = 3, -}; - -static struct mtd_partition ls1x_nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "rootfs", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -struct plat_ls1x_nand ls1x_nand_pdata = { - .parts = ls1x_nand_parts, - .nr_parts = ARRAY_SIZE(ls1x_nand_parts), - .hold_cycle = 0x2, - .wait_cycle = 0xc, -}; - static const struct gpio_led ls1x_gpio_leds[] __initconst = { { .name = "LED9", @@ -64,13 +40,11 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = { static struct platform_device *ls1b_platform_devices[] __initdata = { &ls1x_uart_pdev, &ls1x_cpufreq_pdev, - &ls1x_dma_pdev, &ls1x_eth0_pdev, &ls1x_eth1_pdev, &ls1x_ehci_pdev, &ls1x_gpio0_pdev, &ls1x_gpio1_pdev, - &ls1x_nand_pdev, &ls1x_rtc_pdev, &ls1x_wdt_pdev, }; @@ -78,8 +52,6 @@ static struct platform_device *ls1b_platform_devices[] __initdata = { static int __init ls1b_platform_init(void) { ls1x_serial_set_uartclk(&ls1x_uart_pdev); - ls1x_dma_set_platdata(&ls1x_dma_pdata); - ls1x_nand_set_platdata(&ls1x_nand_pdata); gpio_led_register_device(-1, &ls1x_led_pdata); diff --git a/arch/mips/math-emu/me-debugfs.c b/arch/mips/math-emu/me-debugfs.c index 58798f527356..387724860fa6 100644 --- a/arch/mips/math-emu/me-debugfs.c +++ b/arch/mips/math-emu/me-debugfs.c @@ -189,32 +189,21 @@ static int __init debugfs_fpuemu(void) { struct dentry *fpuemu_debugfs_base_dir; struct dentry *fpuemu_debugfs_inst_dir; - struct dentry *d, *reset_file; - - if (!mips_debugfs_dir) - return -ENODEV; fpuemu_debugfs_base_dir = debugfs_create_dir("fpuemustats", mips_debugfs_dir); - if (!fpuemu_debugfs_base_dir) - return -ENOMEM; - reset_file = debugfs_create_file("fpuemustats_clear", 0444, - mips_debugfs_dir, NULL, - &fpuemustats_clear_fops); - if (!reset_file) - return -ENOMEM; + debugfs_create_file("fpuemustats_clear", 0444, mips_debugfs_dir, NULL, + &fpuemustats_clear_fops); #define FPU_EMU_STAT_OFFSET(m) \ offsetof(struct mips_fpu_emulator_stats, m) #define FPU_STAT_CREATE(m) \ do { \ - d = debugfs_create_file(#m, 0444, fpuemu_debugfs_base_dir, \ + debugfs_create_file(#m, 0444, fpuemu_debugfs_base_dir, \ (void *)FPU_EMU_STAT_OFFSET(m), \ &fops_fpuemu_stat); \ - if (!d) \ - return -ENOMEM; \ } while (0) FPU_STAT_CREATE(emulated); @@ -233,8 +222,6 @@ do { \ fpuemu_debugfs_inst_dir = debugfs_create_dir("instructions", fpuemu_debugfs_base_dir); - if (!fpuemu_debugfs_inst_dir) - return -ENOMEM; #define FPU_STAT_CREATE_EX(m) \ do { \ @@ -242,11 +229,9 @@ do { \ \ adjust_instruction_counter_name(name, #m); \ \ - d = debugfs_create_file(name, 0444, fpuemu_debugfs_inst_dir, \ + debugfs_create_file(name, 0444, fpuemu_debugfs_inst_dir, \ (void *)FPU_EMU_STAT_OFFSET(m), \ &fops_fpuemu_stat); \ - if (!d) \ - return -ENOMEM; \ } while (0) FPU_STAT_CREATE_EX(abs_s); diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 3e5bb203c95a..f34d7ff5eb60 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,9 +3,19 @@ # Makefile for the Linux/MIPS-specific parts of the memory manager. # -obj-y += cache.o extable.o fault.o \ - gup.o init.o mmap.o page.o page-funcs.o \ - pgtable.o tlbex.o tlbex-fault.o tlb-funcs.o +obj-y += cache.o +obj-y += context.o +obj-y += extable.o +obj-y += fault.o +obj-y += gup.o +obj-y += init.o +obj-y += mmap.o +obj-y += page.o +obj-y += page-funcs.o +obj-y += pgtable.o +obj-y += tlbex.o +obj-y += tlbex-fault.o +obj-y += tlb-funcs.o ifdef CONFIG_CPU_MICROMIPS obj-y += uasm-micromips.o diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index 0e45b061e514..8064821e9805 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -128,23 +128,6 @@ static void octeon_flush_icache_range(unsigned long start, unsigned long end) /** - * Flush the icache for a trampoline. These are used for interrupt - * and exception hooking. - * - * @addr: Address to flush - */ -static void octeon_flush_cache_sigtramp(unsigned long addr) -{ - struct vm_area_struct *vma; - - down_read(¤t->mm->mmap_sem); - vma = find_vma(current->mm, addr); - octeon_flush_icache_all_cores(vma); - up_read(¤t->mm->mmap_sem); -} - - -/** * Flush a range out of a vma * * @vma: VMA to flush @@ -289,7 +272,6 @@ void octeon_cache_init(void) flush_cache_mm = octeon_flush_cache_mm; flush_cache_page = octeon_flush_cache_page; flush_cache_range = octeon_flush_cache_range; - flush_cache_sigtramp = octeon_flush_cache_sigtramp; flush_icache_all = octeon_flush_icache_all; flush_data_cache_page = octeon_flush_data_cache_page; flush_icache_range = octeon_flush_icache_range; diff --git a/arch/mips/mm/c-r3k.c b/arch/mips/mm/c-r3k.c index 01848cdf2074..0ca401ddf3b7 100644 --- a/arch/mips/mm/c-r3k.c +++ b/arch/mips/mm/c-r3k.c @@ -274,30 +274,6 @@ static void r3k_flush_data_cache_page(unsigned long addr) { } -static void r3k_flush_cache_sigtramp(unsigned long addr) -{ - unsigned long flags; - - pr_debug("csigtramp[%08lx]\n", addr); - - flags = read_c0_status(); - - write_c0_status(flags&~ST0_IEC); - - /* Fill the TLB to avoid an exception with caches isolated. */ - asm( "lw\t$0, 0x000(%0)\n\t" - "lw\t$0, 0x004(%0)\n\t" - : : "r" (addr) ); - - write_c0_status((ST0_ISC|ST0_SWC|flags)&~ST0_IEC); - - asm( "sb\t$0, 0x000(%0)\n\t" - "sb\t$0, 0x004(%0)\n\t" - : : "r" (addr) ); - - write_c0_status(flags); -} - static void r3k_flush_kernel_vmap_range(unsigned long vaddr, int size) { BUG(); @@ -331,7 +307,6 @@ void r3k_cache_init(void) __flush_kernel_vmap_range = r3k_flush_kernel_vmap_range; - flush_cache_sigtramp = r3k_flush_cache_sigtramp; local_flush_data_cache_page = local_r3k_flush_data_cache_page; flush_data_cache_page = r3k_flush_data_cache_page; diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index d0b64df51eb2..5166e38cd1c6 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -540,6 +540,9 @@ static inline int has_valid_asid(const struct mm_struct *mm, unsigned int type) unsigned int i; const cpumask_t *mask = cpu_present_mask; + if (cpu_has_mmid) + return cpu_context(0, mm) != 0; + /* cpu_sibling_map[] undeclared when !CONFIG_SMP */ #ifdef CONFIG_SMP /* @@ -697,10 +700,7 @@ static inline void local_r4k_flush_cache_page(void *args) } if (exec) { if (vaddr && cpu_has_vtag_icache && mm == current->active_mm) { - int cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) != 0) - drop_mmu_context(mm, cpu); + drop_mmu_context(mm); } else vaddr ? r4k_blast_icache_page(addr) : r4k_blast_icache_user_page(addr); @@ -937,119 +937,6 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size) } #endif /* CONFIG_DMA_NONCOHERENT */ -struct flush_cache_sigtramp_args { - struct mm_struct *mm; - struct page *page; - unsigned long addr; -}; - -/* - * While we're protected against bad userland addresses we don't care - * very much about what happens in that case. Usually a segmentation - * fault will dump the process later on anyway ... - */ -static void local_r4k_flush_cache_sigtramp(void *args) -{ - struct flush_cache_sigtramp_args *fcs_args = args; - unsigned long addr = fcs_args->addr; - struct page *page = fcs_args->page; - struct mm_struct *mm = fcs_args->mm; - int map_coherent = 0; - void *vaddr; - - unsigned long ic_lsize = cpu_icache_line_size(); - unsigned long dc_lsize = cpu_dcache_line_size(); - unsigned long sc_lsize = cpu_scache_line_size(); - - /* - * If owns no valid ASID yet, cannot possibly have gotten - * this page into the cache. - */ - if (!has_valid_asid(mm, R4K_HIT)) - return; - - if (mm == current->active_mm) { - vaddr = NULL; - } else { - /* - * Use kmap_coherent or kmap_atomic to do flushes for - * another ASID than the current one. - */ - map_coherent = (cpu_has_dc_aliases && - page_mapcount(page) && - !Page_dcache_dirty(page)); - if (map_coherent) - vaddr = kmap_coherent(page, addr); - else - vaddr = kmap_atomic(page); - addr = (unsigned long)vaddr + (addr & ~PAGE_MASK); - } - - R4600_HIT_CACHEOP_WAR_IMPL; - if (!cpu_has_ic_fills_f_dc) { - if (dc_lsize) - vaddr ? flush_dcache_line(addr & ~(dc_lsize - 1)) - : protected_writeback_dcache_line( - addr & ~(dc_lsize - 1)); - if (!cpu_icache_snoops_remote_store && scache_size) - vaddr ? flush_scache_line(addr & ~(sc_lsize - 1)) - : protected_writeback_scache_line( - addr & ~(sc_lsize - 1)); - } - if (ic_lsize) - vaddr ? flush_icache_line(addr & ~(ic_lsize - 1)) - : protected_flush_icache_line(addr & ~(ic_lsize - 1)); - - if (vaddr) { - if (map_coherent) - kunmap_coherent(); - else - kunmap_atomic(vaddr); - } - - if (MIPS4K_ICACHE_REFILL_WAR) { - __asm__ __volatile__ ( - ".set push\n\t" - ".set noat\n\t" - ".set "MIPS_ISA_LEVEL"\n\t" -#ifdef CONFIG_32BIT - "la $at,1f\n\t" -#endif -#ifdef CONFIG_64BIT - "dla $at,1f\n\t" -#endif - "cache %0,($at)\n\t" - "nop; nop; nop\n" - "1:\n\t" - ".set pop" - : - : "i" (Hit_Invalidate_I)); - } - if (MIPS_CACHE_SYNC_WAR) - __asm__ __volatile__ ("sync"); -} - -static void r4k_flush_cache_sigtramp(unsigned long addr) -{ - struct flush_cache_sigtramp_args args; - int npages; - - down_read(¤t->mm->mmap_sem); - - npages = get_user_pages_fast(addr, 1, 0, &args.page); - if (npages < 1) - goto out; - - args.mm = current->mm; - args.addr = addr; - - r4k_on_each_cpu(R4K_HIT, local_r4k_flush_cache_sigtramp, &args); - - put_page(args.page); -out: - up_read(¤t->mm->mmap_sem); -} - static void r4k_flush_icache_all(void) { if (cpu_has_vtag_icache) @@ -1978,7 +1865,6 @@ void r4k_cache_init(void) __flush_kernel_vmap_range = r4k_flush_kernel_vmap_range; - flush_cache_sigtramp = r4k_flush_cache_sigtramp; flush_icache_all = r4k_flush_icache_all; local_flush_data_cache_page = local_r4k_flush_data_cache_page; flush_data_cache_page = r4k_flush_data_cache_page; @@ -2033,7 +1919,6 @@ void r4k_cache_init(void) /* I$ fills from D$ just by emptying the write buffers */ flush_cache_page = (void *)b5k_instruction_hazard; flush_cache_range = (void *)b5k_instruction_hazard; - flush_cache_sigtramp = (void *)b5k_instruction_hazard; local_flush_data_cache_page = (void *)b5k_instruction_hazard; flush_data_cache_page = (void *)b5k_instruction_hazard; flush_icache_range = (void *)b5k_instruction_hazard; @@ -2052,7 +1937,6 @@ void r4k_cache_init(void) flush_cache_mm = (void *)cache_noop; flush_cache_page = (void *)cache_noop; flush_cache_range = (void *)cache_noop; - flush_cache_sigtramp = (void *)cache_noop; flush_icache_all = (void *)cache_noop; flush_data_cache_page = (void *)cache_noop; local_flush_data_cache_page = (void *)cache_noop; diff --git a/arch/mips/mm/c-tx39.c b/arch/mips/mm/c-tx39.c index 5f6c099a9457..b7c8a9d79c35 100644 --- a/arch/mips/mm/c-tx39.c +++ b/arch/mips/mm/c-tx39.c @@ -290,25 +290,6 @@ static void tx39_dma_cache_inv(unsigned long addr, unsigned long size) } } -static void tx39_flush_cache_sigtramp(unsigned long addr) -{ - unsigned long ic_lsize = current_cpu_data.icache.linesz; - unsigned long dc_lsize = current_cpu_data.dcache.linesz; - unsigned long config; - unsigned long flags; - - protected_writeback_dcache_line(addr & ~(dc_lsize - 1)); - - /* disable icache (set ICE#) */ - local_irq_save(flags); - config = read_c0_conf(); - write_c0_conf(config & ~TX39_CONF_ICE); - TX39_STOP_STREAMING(); - protected_flush_icache_line(addr & ~(ic_lsize - 1)); - write_c0_conf(config); - local_irq_restore(flags); -} - static __init void tx39_probe_cache(void) { unsigned long config; @@ -368,7 +349,6 @@ void tx39_cache_init(void) flush_icache_range = (void *) tx39h_flush_icache_all; local_flush_icache_range = (void *) tx39h_flush_icache_all; - flush_cache_sigtramp = (void *) tx39h_flush_icache_all; local_flush_data_cache_page = (void *) tx39h_flush_icache_all; flush_data_cache_page = (void *) tx39h_flush_icache_all; @@ -397,7 +377,6 @@ void tx39_cache_init(void) __flush_kernel_vmap_range = tx39_flush_kernel_vmap_range; - flush_cache_sigtramp = tx39_flush_cache_sigtramp; local_flush_data_cache_page = local_tx39_flush_data_cache_page; flush_data_cache_page = tx39_flush_data_cache_page; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 55099fbff4e6..3da216988672 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -47,7 +47,6 @@ void (*__flush_kernel_vmap_range)(unsigned long vaddr, int size); EXPORT_SYMBOL_GPL(__flush_kernel_vmap_range); /* MIPS specific cache operations */ -void (*flush_cache_sigtramp)(unsigned long addr); void (*local_flush_data_cache_page)(void * addr); void (*flush_data_cache_page)(unsigned long addr); void (*flush_icache_all)(void); diff --git a/arch/mips/mm/context.c b/arch/mips/mm/context.c new file mode 100644 index 000000000000..b25564090939 --- /dev/null +++ b/arch/mips/mm/context.c @@ -0,0 +1,291 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/atomic.h> +#include <linux/mmu_context.h> +#include <linux/percpu.h> +#include <linux/spinlock.h> + +static DEFINE_RAW_SPINLOCK(cpu_mmid_lock); + +static atomic64_t mmid_version; +static unsigned int num_mmids; +static unsigned long *mmid_map; + +static DEFINE_PER_CPU(u64, reserved_mmids); +static cpumask_t tlb_flush_pending; + +static bool asid_versions_eq(int cpu, u64 a, u64 b) +{ + return ((a ^ b) & asid_version_mask(cpu)) == 0; +} + +void get_new_mmu_context(struct mm_struct *mm) +{ + unsigned int cpu; + u64 asid; + + /* + * This function is specific to ASIDs, and should not be called when + * MMIDs are in use. + */ + if (WARN_ON(IS_ENABLED(CONFIG_DEBUG_VM) && cpu_has_mmid)) + return; + + cpu = smp_processor_id(); + asid = asid_cache(cpu); + + if (!((asid += cpu_asid_inc()) & cpu_asid_mask(&cpu_data[cpu]))) { + if (cpu_has_vtag_icache) + flush_icache_all(); + local_flush_tlb_all(); /* start new asid cycle */ + } + + set_cpu_context(cpu, mm, asid); + asid_cache(cpu) = asid; +} +EXPORT_SYMBOL_GPL(get_new_mmu_context); + +void check_mmu_context(struct mm_struct *mm) +{ + unsigned int cpu = smp_processor_id(); + + /* + * This function is specific to ASIDs, and should not be called when + * MMIDs are in use. + */ + if (WARN_ON(IS_ENABLED(CONFIG_DEBUG_VM) && cpu_has_mmid)) + return; + + /* Check if our ASID is of an older version and thus invalid */ + if (!asid_versions_eq(cpu, cpu_context(cpu, mm), asid_cache(cpu))) + get_new_mmu_context(mm); +} +EXPORT_SYMBOL_GPL(check_mmu_context); + +static void flush_context(void) +{ + u64 mmid; + int cpu; + + /* Update the list of reserved MMIDs and the MMID bitmap */ + bitmap_clear(mmid_map, 0, num_mmids); + + /* Reserve an MMID for kmap/wired entries */ + __set_bit(MMID_KERNEL_WIRED, mmid_map); + + for_each_possible_cpu(cpu) { + mmid = xchg_relaxed(&cpu_data[cpu].asid_cache, 0); + + /* + * If this CPU has already been through a + * rollover, but hasn't run another task in + * the meantime, we must preserve its reserved + * MMID, as this is the only trace we have of + * the process it is still running. + */ + if (mmid == 0) + mmid = per_cpu(reserved_mmids, cpu); + + __set_bit(mmid & cpu_asid_mask(&cpu_data[cpu]), mmid_map); + per_cpu(reserved_mmids, cpu) = mmid; + } + + /* + * Queue a TLB invalidation for each CPU to perform on next + * context-switch + */ + cpumask_setall(&tlb_flush_pending); +} + +static bool check_update_reserved_mmid(u64 mmid, u64 newmmid) +{ + bool hit; + int cpu; + + /* + * Iterate over the set of reserved MMIDs looking for a match. + * If we find one, then we can update our mm to use newmmid + * (i.e. the same MMID in the current generation) but we can't + * exit the loop early, since we need to ensure that all copies + * of the old MMID are updated to reflect the mm. Failure to do + * so could result in us missing the reserved MMID in a future + * generation. + */ + hit = false; + for_each_possible_cpu(cpu) { + if (per_cpu(reserved_mmids, cpu) == mmid) { + hit = true; + per_cpu(reserved_mmids, cpu) = newmmid; + } + } + + return hit; +} + +static u64 get_new_mmid(struct mm_struct *mm) +{ + static u32 cur_idx = MMID_KERNEL_WIRED + 1; + u64 mmid, version, mmid_mask; + + mmid = cpu_context(0, mm); + version = atomic64_read(&mmid_version); + mmid_mask = cpu_asid_mask(&boot_cpu_data); + + if (!asid_versions_eq(0, mmid, 0)) { + u64 newmmid = version | (mmid & mmid_mask); + + /* + * If our current MMID was active during a rollover, we + * can continue to use it and this was just a false alarm. + */ + if (check_update_reserved_mmid(mmid, newmmid)) { + mmid = newmmid; + goto set_context; + } + + /* + * We had a valid MMID in a previous life, so try to re-use + * it if possible. + */ + if (!__test_and_set_bit(mmid & mmid_mask, mmid_map)) { + mmid = newmmid; + goto set_context; + } + } + + /* Allocate a free MMID */ + mmid = find_next_zero_bit(mmid_map, num_mmids, cur_idx); + if (mmid != num_mmids) + goto reserve_mmid; + + /* We're out of MMIDs, so increment the global version */ + version = atomic64_add_return_relaxed(asid_first_version(0), + &mmid_version); + + /* Note currently active MMIDs & mark TLBs as requiring flushes */ + flush_context(); + + /* We have more MMIDs than CPUs, so this will always succeed */ + mmid = find_first_zero_bit(mmid_map, num_mmids); + +reserve_mmid: + __set_bit(mmid, mmid_map); + cur_idx = mmid; + mmid |= version; +set_context: + set_cpu_context(0, mm, mmid); + return mmid; +} + +void check_switch_mmu_context(struct mm_struct *mm) +{ + unsigned int cpu = smp_processor_id(); + u64 ctx, old_active_mmid; + unsigned long flags; + + if (!cpu_has_mmid) { + check_mmu_context(mm); + write_c0_entryhi(cpu_asid(cpu, mm)); + goto setup_pgd; + } + + /* + * MMID switch fast-path, to avoid acquiring cpu_mmid_lock when it's + * unnecessary. + * + * The memory ordering here is subtle. If our active_mmids is non-zero + * and the MMID matches the current version, then we update the CPU's + * asid_cache with a relaxed cmpxchg. Racing with a concurrent rollover + * means that either: + * + * - We get a zero back from the cmpxchg and end up waiting on + * cpu_mmid_lock in check_mmu_context(). Taking the lock synchronises + * with the rollover and so we are forced to see the updated + * generation. + * + * - We get a valid MMID back from the cmpxchg, which means the + * relaxed xchg in flush_context will treat us as reserved + * because atomic RmWs are totally ordered for a given location. + */ + ctx = cpu_context(cpu, mm); + old_active_mmid = READ_ONCE(cpu_data[cpu].asid_cache); + if (!old_active_mmid || + !asid_versions_eq(cpu, ctx, atomic64_read(&mmid_version)) || + !cmpxchg_relaxed(&cpu_data[cpu].asid_cache, old_active_mmid, ctx)) { + raw_spin_lock_irqsave(&cpu_mmid_lock, flags); + + ctx = cpu_context(cpu, mm); + if (!asid_versions_eq(cpu, ctx, atomic64_read(&mmid_version))) + ctx = get_new_mmid(mm); + + WRITE_ONCE(cpu_data[cpu].asid_cache, ctx); + raw_spin_unlock_irqrestore(&cpu_mmid_lock, flags); + } + + /* + * Invalidate the local TLB if needed. Note that we must only clear our + * bit in tlb_flush_pending after this is complete, so that the + * cpu_has_shared_ftlb_entries case below isn't misled. + */ + if (cpumask_test_cpu(cpu, &tlb_flush_pending)) { + if (cpu_has_vtag_icache) + flush_icache_all(); + local_flush_tlb_all(); + cpumask_clear_cpu(cpu, &tlb_flush_pending); + } + + write_c0_memorymapid(ctx & cpu_asid_mask(&boot_cpu_data)); + + /* + * If this CPU shares FTLB entries with its siblings and one or more of + * those siblings hasn't yet invalidated its TLB following a version + * increase then we need to invalidate any TLB entries for our MMID + * that we might otherwise pick up from a sibling. + * + * We ifdef on CONFIG_SMP because cpu_sibling_map isn't defined in + * CONFIG_SMP=n kernels. + */ +#ifdef CONFIG_SMP + if (cpu_has_shared_ftlb_entries && + cpumask_intersects(&tlb_flush_pending, &cpu_sibling_map[cpu])) { + /* Ensure we operate on the new MMID */ + mtc0_tlbw_hazard(); + + /* + * Invalidate all TLB entries associated with the new + * MMID, and wait for the invalidation to complete. + */ + ginvt_mmid(); + sync_ginv(); + } +#endif + +setup_pgd: + TLBMISS_HANDLER_SETUP_PGD(mm->pgd); +} +EXPORT_SYMBOL_GPL(check_switch_mmu_context); + +static int mmid_init(void) +{ + if (!cpu_has_mmid) + return 0; + + /* + * Expect allocation after rollover to fail if we don't have at least + * one more MMID than CPUs. + */ + num_mmids = asid_first_version(0); + WARN_ON(num_mmids <= num_possible_cpus()); + + atomic64_set(&mmid_version, asid_first_version(0)); + mmid_map = kcalloc(BITS_TO_LONGS(num_mmids), sizeof(*mmid_map), + GFP_KERNEL); + if (!mmid_map) + panic("Failed to allocate bitmap for %u MMIDs\n", num_mmids); + + /* Reserve an MMID for kmap/wired entries */ + __set_bit(MMID_KERNEL_WIRED, mmid_map); + + pr_info("MMID allocator initialised with %u entries\n", num_mmids); + return 0; +} +early_initcall(mmid_init); diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c index cb38461391cb..b57465733e87 100644 --- a/arch/mips/mm/dma-noncoherent.c +++ b/arch/mips/mm/dma-noncoherent.c @@ -120,13 +120,8 @@ static inline void dma_sync_phys(phys_addr_t paddr, size_t size, if (PageHighMem(page)) { void *addr; - if (offset + len > PAGE_SIZE) { - if (offset >= PAGE_SIZE) { - page += offset >> PAGE_SHIFT; - offset &= ~PAGE_MASK; - } + if (offset + len > PAGE_SIZE) len = PAGE_SIZE - offset; - } addr = kmap_atomic(page); dma_sync_virt(addr + offset, len, dir); @@ -145,12 +140,14 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr, dma_sync_phys(paddr, size, dir); } +#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr, size_t size, enum dma_data_direction dir) { if (cpu_needs_post_dma_flush(dev)) dma_sync_phys(paddr, size, dir); } +#endif void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size, enum dma_data_direction direction) diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index b521d8e2d359..c3b45e248806 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -84,6 +84,7 @@ void setup_zero_pages(void) static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot) { enum fixed_addresses idx; + unsigned int uninitialized_var(old_mmid); unsigned long vaddr, flags, entrylo; unsigned long old_ctx; pte_t pte; @@ -110,6 +111,10 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot) write_c0_entryhi(vaddr & (PAGE_MASK << 1)); write_c0_entrylo0(entrylo); write_c0_entrylo1(entrylo); + if (cpu_has_mmid) { + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(MMID_KERNEL_WIRED); + } #ifdef CONFIG_XPA if (cpu_has_xpa) { entrylo = (pte.pte_low & _PFNX_MASK); @@ -124,6 +129,8 @@ static void *__kmap_pgprot(struct page *page, unsigned long addr, pgprot_t prot) tlb_write_indexed(); tlbw_use_hazard(); write_c0_entryhi(old_ctx); + if (cpu_has_mmid) + write_c0_memorymapid(old_mmid); local_irq_restore(flags); return (void*) vaddr; diff --git a/arch/mips/mm/sc-debugfs.c b/arch/mips/mm/sc-debugfs.c index 2a116084216f..9507421de335 100644 --- a/arch/mips/mm/sc-debugfs.c +++ b/arch/mips/mm/sc-debugfs.c @@ -55,20 +55,11 @@ static const struct file_operations sc_prefetch_fops = { static int __init sc_debugfs_init(void) { - struct dentry *dir, *file; - - if (!mips_debugfs_dir) - return -ENODEV; + struct dentry *dir; dir = debugfs_create_dir("l2cache", mips_debugfs_dir); - if (IS_ERR(dir)) - return PTR_ERR(dir); - - file = debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir, - NULL, &sc_prefetch_fops); - if (!file) - return -ENOMEM; - + debugfs_create_file("prefetch", S_IRUGO | S_IWUSR, dir, NULL, + &sc_prefetch_fops); return 0; } late_initcall(sc_debugfs_init); diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c index 6f589e0112ce..50f207591b6d 100644 --- a/arch/mips/mm/tlb-r3k.c +++ b/arch/mips/mm/tlb-r3k.c @@ -67,18 +67,6 @@ void local_flush_tlb_all(void) local_irq_restore(flags); } -void local_flush_tlb_mm(struct mm_struct *mm) -{ - int cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) != 0) { -#ifdef DEBUG_TLB - printk("[tlbmm<%lu>]", (unsigned long)cpu_context(cpu, mm)); -#endif - drop_mmu_context(mm, cpu); - } -} - void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { @@ -117,7 +105,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } write_c0_entryhi(oldpid); } else { - drop_mmu_context(mm, cpu); + drop_mmu_context(mm); } local_irq_restore(flags); } diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 0596505770db..c13e46ced425 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -104,23 +104,6 @@ void local_flush_tlb_all(void) } EXPORT_SYMBOL(local_flush_tlb_all); -/* All entries common to a mm share an asid. To effectively flush - these entries, we just bump the asid. */ -void local_flush_tlb_mm(struct mm_struct *mm) -{ - int cpu; - - preempt_disable(); - - cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) != 0) { - drop_mmu_context(mm, cpu); - } - - preempt_enable(); -} - void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { @@ -137,14 +120,23 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (size <= (current_cpu_data.tlbsizeftlbsets ? current_cpu_data.tlbsize / 8 : current_cpu_data.tlbsize / 2)) { - int oldpid = read_c0_entryhi(); + unsigned long old_entryhi, uninitialized_var(old_mmid); int newpid = cpu_asid(cpu, mm); + old_entryhi = read_c0_entryhi(); + if (cpu_has_mmid) { + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(newpid); + } + htw_stop(); while (start < end) { int idx; - write_c0_entryhi(start | newpid); + if (cpu_has_mmid) + write_c0_entryhi(start); + else + write_c0_entryhi(start | newpid); start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); @@ -160,10 +152,12 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, tlb_write_indexed(); } tlbw_use_hazard(); - write_c0_entryhi(oldpid); + write_c0_entryhi(old_entryhi); + if (cpu_has_mmid) + write_c0_memorymapid(old_mmid); htw_start(); } else { - drop_mmu_context(mm, cpu); + drop_mmu_context(mm); } flush_micro_tlb(); local_irq_restore(flags); @@ -220,15 +214,21 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) int cpu = smp_processor_id(); if (cpu_context(cpu, vma->vm_mm) != 0) { - unsigned long flags; - int oldpid, newpid, idx; + unsigned long uninitialized_var(old_mmid); + unsigned long flags, old_entryhi; + int idx; - newpid = cpu_asid(cpu, vma->vm_mm); page &= (PAGE_MASK << 1); local_irq_save(flags); - oldpid = read_c0_entryhi(); + old_entryhi = read_c0_entryhi(); htw_stop(); - write_c0_entryhi(page | newpid); + if (cpu_has_mmid) { + old_mmid = read_c0_memorymapid(); + write_c0_entryhi(page); + write_c0_memorymapid(cpu_asid(cpu, vma->vm_mm)); + } else { + write_c0_entryhi(page | cpu_asid(cpu, vma->vm_mm)); + } mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); @@ -244,7 +244,9 @@ void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long page) tlbw_use_hazard(); finish: - write_c0_entryhi(oldpid); + write_c0_entryhi(old_entryhi); + if (cpu_has_mmid) + write_c0_memorymapid(old_mmid); htw_start(); flush_micro_tlb_vm(vma); local_irq_restore(flags); @@ -307,9 +309,13 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) local_irq_save(flags); htw_stop(); - pid = read_c0_entryhi() & cpu_asid_mask(¤t_cpu_data); address &= (PAGE_MASK << 1); - write_c0_entryhi(address | pid); + if (cpu_has_mmid) { + write_c0_entryhi(address); + } else { + pid = read_c0_entryhi() & cpu_asid_mask(¤t_cpu_data); + write_c0_entryhi(address | pid); + } pgdp = pgd_offset(vma->vm_mm, address); mtc0_tlbw_hazard(); tlb_probe(); @@ -375,12 +381,17 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, #ifdef CONFIG_XPA panic("Broken for XPA kernels"); #else + unsigned int uninitialized_var(old_mmid); unsigned long flags; unsigned long wired; unsigned long old_pagemask; unsigned long old_ctx; local_irq_save(flags); + if (cpu_has_mmid) { + old_mmid = read_c0_memorymapid(); + write_c0_memorymapid(MMID_KERNEL_WIRED); + } /* Save old context and create impossible VPN2 value */ old_ctx = read_c0_entryhi(); htw_stop(); @@ -398,6 +409,8 @@ void add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, tlbw_use_hazard(); write_c0_entryhi(old_ctx); + if (cpu_has_mmid) + write_c0_memorymapid(old_mmid); tlbw_use_hazard(); /* What is the hazard here? */ htw_start(); write_c0_pagemask(old_pagemask); diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c index e86e2e55ad3e..c1e9e144007e 100644 --- a/arch/mips/mm/tlb-r8k.c +++ b/arch/mips/mm/tlb-r8k.c @@ -50,14 +50,6 @@ void local_flush_tlb_all(void) local_irq_restore(flags); } -void local_flush_tlb_mm(struct mm_struct *mm) -{ - int cpu = smp_processor_id(); - - if (cpu_context(cpu, mm) != 0) - drop_mmu_context(mm, cpu); -} - void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) { @@ -75,7 +67,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, local_irq_save(flags); if (size > TFP_TLB_SIZE / 2) { - drop_mmu_context(mm, cpu); + drop_mmu_context(mm); goto out_restore; } diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 8185a2bfaf09..c4f976593061 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -29,6 +29,7 @@ obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o # # These are still pretty much in the old state, watch, go blind. # +obj-$(CONFIG_ATH79) += fixup-ath79.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o obj-$(CONFIG_LEMOTE_FULOONG2E) += fixup-fuloong2e.o ops-loongson2.o diff --git a/arch/mips/pci/fixup-ath79.c b/arch/mips/pci/fixup-ath79.c new file mode 100644 index 000000000000..9e651a4af05e --- /dev/null +++ b/arch/mips/pci/fixup-ath79.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2018 John Crispin <john@phrozen.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/pci.h> +//#include <linux/of_irq.h> +#include <linux/of_pci.h> + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return PCIBIOS_SUCCESSFUL; +} + +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return of_irq_parse_and_map_pci(dev, slot, pin); +} diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index a1d2c4ae0d1b..df95b0da08f2 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -44,7 +44,7 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) { struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); - bridge_t *bridge = bc->base; + struct bridge_regs *bridge = bc->base; int slot = PCI_SLOT(devfn); int fn = PCI_FUNC(devfn); volatile void *addr; @@ -56,11 +56,11 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_DEVICE_NOT_FOUND; /* - * IOC3 is fucking fucked beyond belief ... Don't even give the + * IOC3 is broken beyond belief ... Don't even give the * generic PCI code a chance to look at it for real ... */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) - goto oh_my_gawd; + goto is_ioc3; addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; @@ -73,21 +73,16 @@ static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -oh_my_gawd: +is_ioc3: /* - * IOC3 is fucking fucked beyond belief ... Don't even give the - * generic PCI code a chance to look at the wrong register. + * IOC3 special handling */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } - /* - * IOC3 is fucking fucked beyond belief ... Don't try to access - * anything but 32-bit words ... - */ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; if (get_dbe(cf, (u32 *) addr)) @@ -104,7 +99,7 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * value) { struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); - bridge_t *bridge = bc->base; + struct bridge_regs *bridge = bc->base; int busno = bus->number; int slot = PCI_SLOT(devfn); int fn = PCI_FUNC(devfn); @@ -112,19 +107,19 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, u32 cf, shift, mask; int res; - bridge->b_pci_cfg = (busno << 16) | (slot << 11); + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; if (get_dbe(cf, (u32 *) addr)) return PCIBIOS_DEVICE_NOT_FOUND; /* - * IOC3 is fucking fucked beyond belief ... Don't even give the + * IOC3 is broken beyond belief ... Don't even give the * generic PCI code a chance to look at it for real ... */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) - goto oh_my_gawd; + goto is_ioc3; - bridge->b_pci_cfg = (busno << 16) | (slot << 11); + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; if (size == 1) @@ -136,22 +131,17 @@ static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; -oh_my_gawd: +is_ioc3: /* - * IOC3 is fucking fucked beyond belief ... Don't even give the - * generic PCI code a chance to look at the wrong register. + * IOC3 special handling */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } - /* - * IOC3 is fucking fucked beyond belief ... Don't try to access - * anything but 32-bit words ... - */ - bridge->b_pci_cfg = (busno << 16) | (slot << 11); + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); addr = &bridge->b_type1_cfg.c[(fn << 8) | where]; if (get_dbe(cf, (u32 *) addr)) @@ -177,7 +167,7 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) { struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); - bridge_t *bridge = bc->base; + struct bridge_regs *bridge = bc->base; int slot = PCI_SLOT(devfn); int fn = PCI_FUNC(devfn); volatile void *addr; @@ -189,11 +179,11 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_DEVICE_NOT_FOUND; /* - * IOC3 is fucking fucked beyond belief ... Don't even give the + * IOC3 is broken beyond belief ... Don't even give the * generic PCI code a chance to look at it for real ... */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) - goto oh_my_gawd; + goto is_ioc3; addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; @@ -210,19 +200,14 @@ static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_SUCCESSFUL; -oh_my_gawd: +is_ioc3: /* - * IOC3 is fucking fucked beyond belief ... Don't even give the - * generic PCI code a chance to touch the wrong register. + * IOC3 special handling */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) return PCIBIOS_SUCCESSFUL; - /* - * IOC3 is fucking fucked beyond belief ... Don't try to access - * anything but 32-bit words ... - */ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; if (get_dbe(cf, (u32 *) addr)) @@ -243,7 +228,7 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) { struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); - bridge_t *bridge = bc->base; + struct bridge_regs *bridge = bc->base; int slot = PCI_SLOT(devfn); int fn = PCI_FUNC(devfn); int busno = bus->number; @@ -251,17 +236,17 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, u32 cf, shift, mask, smask; int res; - bridge->b_pci_cfg = (busno << 16) | (slot << 11); + bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; if (get_dbe(cf, (u32 *) addr)) return PCIBIOS_DEVICE_NOT_FOUND; /* - * IOC3 is fucking fucked beyond belief ... Don't even give the + * IOC3 is broken beyond belief ... Don't even give the * generic PCI code a chance to look at it for real ... */ if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) - goto oh_my_gawd; + goto is_ioc3; addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; @@ -278,19 +263,14 @@ static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_SUCCESSFUL; -oh_my_gawd: +is_ioc3: /* - * IOC3 is fucking fucked beyond belief ... Don't even give the - * generic PCI code a chance to touch the wrong register. + * IOC3 special handling */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) return PCIBIOS_SUCCESSFUL; - /* - * IOC3 is fucking fucked beyond belief ... Don't try to access - * anything but 32-bit words ... - */ addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; if (get_dbe(cf, (u32 *) addr)) diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index c94a66070a60..3c177b4d0609 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -24,22 +24,11 @@ #define MAX_PCI_BUSSES 40 /* - * Max #PCI devices (like scsi controllers) we handle on a bus. - */ -#define MAX_DEVICES_PER_PCIBUS 8 - -/* * XXX: No kmalloc available when we do our crosstalk scan, * we should try to move it later in the boot process. */ static struct bridge_controller bridges[MAX_PCI_BUSSES]; -/* - * Translate from irq to software PCI bus number and PCI slot. - */ -struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; -int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; - extern struct pci_ops bridge_pci_ops; int bridge_probe(nasid_t nasid, int widget_id, int masterwid) @@ -47,7 +36,6 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid) unsigned long offset = NODE_OFFSET(nasid); struct bridge_controller *bc; static int num_bridges = 0; - bridge_t *bridge; int slot; pci_set_flags(PCI_PROBE_ONLY); @@ -78,7 +66,6 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid) bc->io.end = ~0UL; bc->io.flags = IORESOURCE_IO; - bc->irq_cpu = smp_processor_id(); bc->widget_id = widget_id; bc->nasid = nasid; @@ -87,45 +74,43 @@ int bridge_probe(nasid_t nasid, int widget_id, int masterwid) /* * point to this bridge */ - bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); + bc->base = (struct bridge_regs *)RAW_NODE_SWIN_BASE(nasid, widget_id); /* * Clear all pending interrupts. */ - bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; + bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR); /* * Until otherwise set up, assume all interrupts are from slot 0 */ - bridge->b_int_device = 0x0; + bridge_write(bc, b_int_device, 0x0); /* * swap pio's to pci mem and io space (big windows) */ - bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | - BRIDGE_CTRL_MEM_SWAP; + bridge_set(bc, b_wid_control, BRIDGE_CTRL_IO_SWAP | + BRIDGE_CTRL_MEM_SWAP); #ifdef CONFIG_PAGE_SIZE_4KB - bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; + bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); #else /* 16kB or larger */ - bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; + bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); #endif /* * Hmm... IRIX sets additional bits in the address which * are documented as reserved in the bridge docs. */ - bridge->b_wid_int_upper = 0x8000 | (masterwid << 16); - bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/ - bridge->b_dir_map = (masterwid << 20); /* DMA */ - bridge->b_int_enable = 0; + bridge_write(bc, b_wid_int_upper, 0x8000 | (masterwid << 16)); + bridge_write(bc, b_wid_int_lower, 0x01800090); /* PI_INT_PEND_MOD off*/ + bridge_write(bc, b_dir_map, (masterwid << 20)); /* DMA */ + bridge_write(bc, b_int_enable, 0); for (slot = 0; slot < 8; slot ++) { - bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; + bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR); bc->pci_int[slot] = -1; } - bridge->b_wid_tflush; /* wait until Bridge PIO complete */ - - bc->base = bridge; + bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */ register_pci_controller(&bc->pc); @@ -168,16 +153,12 @@ int pcibios_plat_dev_init(struct pci_dev *dev) irq = bc->pci_int[slot]; if (irq == -1) { - irq = request_bridge_irq(bc); + irq = request_bridge_irq(bc, slot); if (irq < 0) return irq; bc->pci_int[slot] = irq; } - - irq_to_bridge[irq] = bc; - irq_to_slot[irq] = slot; - dev->irq = irq; return 0; @@ -206,7 +187,7 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) static inline void pci_disable_swapping(struct pci_dev *dev) { struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); - bridge_t *bridge = bc->base; + struct bridge_regs *bridge = bc->base; int slot = PCI_SLOT(dev->devfn); /* Turn off byte swapping */ diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c index e1fa5972a81d..648f5eb2ba68 100644 --- a/arch/mips/ralink/bootrom.c +++ b/arch/mips/ralink/bootrom.c @@ -35,13 +35,7 @@ static const struct file_operations bootrom_file_ops = { static int bootrom_setup(void) { - if (!debugfs_create_file("bootrom", 0444, - NULL, NULL, &bootrom_file_ops)) { - pr_err("Failed to create bootrom debugfs file\n"); - - return -EINVAL; - } - + debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_file_ops); return 0; } diff --git a/arch/mips/sgi-ip27/Makefile b/arch/mips/sgi-ip27/Makefile index 73502fda13ee..27c14ede191e 100644 --- a/arch/mips/sgi-ip27/Makefile +++ b/arch/mips/sgi-ip27/Makefile @@ -3,10 +3,9 @@ # Makefile for the IP27 specific kernel interface routines under Linux. # -obj-y := ip27-berr.o ip27-irq.o ip27-irqno.o ip27-init.o ip27-klconfig.o \ +obj-y := ip27-berr.o ip27-irq.o ip27-init.o ip27-klconfig.o \ ip27-klnuma.o ip27-memory.o ip27-nmi.o ip27-reset.o ip27-timer.o \ ip27-hubio.o ip27-xtalk.o obj-$(CONFIG_EARLY_PRINTK) += ip27-console.o -obj-$(CONFIG_PCI) += ip27-irq-pci.o obj-$(CONFIG_SMP) += ip27-smp.o diff --git a/arch/mips/sgi-ip27/ip27-hubio.c b/arch/mips/sgi-ip27/ip27-hubio.c index 2abe016a0ffc..68fb0cb89d9d 100644 --- a/arch/mips/sgi-ip27/ip27-hubio.c +++ b/arch/mips/sgi-ip27/ip27-hubio.c @@ -63,7 +63,7 @@ unsigned long hub_pio_map(cnodeid_t cnode, xwidgetnum_t widget, * after we write it. */ IIO_ITTE_PUT(nasid, i, HUB_PIO_MAP_TO_MEM, widget, xtalk_addr); - (void) HUB_L(IIO_ITTE_GET(nasid, i)); + __raw_readq(IIO_ITTE_GET(nasid, i)); return NODE_BWIN_BASE(nasid, widget) + (xtalk_addr % BWIN_SIZE); } @@ -135,7 +135,7 @@ static void hub_setup_prb(nasid_t nasid, int prbnum, int credits) **/ static void hub_set_piomode(nasid_t nasid) { - hubreg_t ii_iowa; + u64 ii_iowa; hubii_wcr_t ii_wcr; unsigned i; diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index e501c43c02db..6074efeff894 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -52,13 +52,10 @@ EXPORT_SYMBOL_GPL(sn_cpu_info); extern void pcibr_setup(cnodeid_t); -extern void xtalk_probe_node(cnodeid_t nid); - static void per_hub_init(cnodeid_t cnode) { struct hub_data *hub = hub_data(cnode); nasid_t nasid = COMPACT_TO_NASID_NODEID(cnode); - int i; cpumask_set_cpu(smp_processor_id(), &hub->h_cpus); @@ -71,7 +68,6 @@ static void per_hub_init(cnodeid_t cnode) REMOTE_HUB_S(nasid, IIO_ICTO, 0xff); hub_rtc_init(cnode); - xtalk_probe_node(cnode); #ifdef CONFIG_REPLICATE_EXHANDLERS /* @@ -90,24 +86,6 @@ static void per_hub_init(cnodeid_t cnode) __flush_cache_all(); } #endif - - /* - * Some interrupts are reserved by hardware or by software convention. - * Mark these as reserved right away so they won't be used accidentally - * later. - */ - for (i = 0; i <= BASE_PCI_IRQ; i++) { - __set_bit(i, hub->irq_alloc_mask); - LOCAL_HUB_CLR_INTR(INT_PEND0_BASELVL + i); - } - - __set_bit(IP_PEND0_6_63, hub->irq_alloc_mask); - LOCAL_HUB_S(PI_INT_PEND_MOD, IP_PEND0_6_63); - - for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) { - __set_bit(i, hub->irq_alloc_mask); - LOCAL_HUB_CLR_INTR(INT_PEND1_BASELVL + i); - } } void per_cpu_init(void) @@ -116,8 +94,6 @@ void per_cpu_init(void) int slice = LOCAL_HUB_L(PI_CPU_NUM); cnodeid_t cnode = get_compact_nodeid(); struct hub_data *hub = hub_data(cnode); - struct slice_data *si = hub->slice + slice; - int i; if (test_and_set_bit(slice, &hub->slice_map)) return; @@ -126,22 +102,14 @@ void per_cpu_init(void) per_hub_init(cnode); - for (i = 0; i < LEVELS_PER_SLICE; i++) - si->level_to_irq[i] = -1; - - /* - * We use this so we can find the local hub's data as fast as only - * possible. - */ - cpu_data[cpu].data = si; - cpu_time_init(); install_ipi(); /* Install our NMI handler if symmon hasn't installed one. */ install_cpu_nmi_handler(cputoslice(cpu)); - set_c0_status(SRB_DEV0 | SRB_DEV1); + enable_percpu_irq(IP27_HUB_PEND0_IRQ, IRQ_TYPE_NONE); + enable_percpu_irq(IP27_HUB_PEND1_IRQ, IRQ_TYPE_NONE); } /* @@ -177,7 +145,7 @@ extern void ip27_reboot_setup(void); void __init plat_mem_setup(void) { - hubreg_t p, e, n_mode; + u64 p, e, n_mode; nasid_t nid; ip27_reboot_setup(); @@ -215,7 +183,6 @@ void __init plat_mem_setup(void) #endif ioc3_eth_init(); - per_cpu_init(); set_io_port_base(IO_BASE); } diff --git a/arch/mips/sgi-ip27/ip27-irq-pci.c b/arch/mips/sgi-ip27/ip27-irq-pci.c deleted file mode 100644 index cd449e90b917..000000000000 --- a/arch/mips/sgi-ip27/ip27-irq-pci.c +++ /dev/null @@ -1,266 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * ip27-irq.c: Highlevel interrupt handling for IP27 architecture. - * - * Copyright (C) 1999, 2000 Ralf Baechle (ralf@gnu.org) - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - * Copyright (C) 1999 - 2001 Kanoj Sarcar - */ - -#undef DEBUG - -#include <linux/irq.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/smp.h> -#include <linux/random.h> -#include <linux/kernel.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/bootinfo.h> -#include <asm/io.h> -#include <asm/mipsregs.h> - -#include <asm/processor.h> -#include <asm/pci/bridge.h> -#include <asm/sn/addrs.h> -#include <asm/sn/agent.h> -#include <asm/sn/arch.h> -#include <asm/sn/hub.h> -#include <asm/sn/intr.h> - -/* - * Linux has a controller-independent x86 interrupt architecture. - * every controller has a 'controller-template', that is used - * by the main code to do the right thing. Each driver-visible - * interrupt source is transparently wired to the appropriate - * controller. Thus drivers need not be aware of the - * interrupt-controller. - * - * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC, - * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC. - * (IO-APICs assumed to be messaging to Pentium local-APICs) - * - * the code is designed to be easily extended with new/different - * interrupt controllers, without having to do assembly magic. - */ - -extern struct bridge_controller *irq_to_bridge[]; -extern int irq_to_slot[]; - -/* - * use these macros to get the encoded nasid and widget id - * from the irq value - */ -#define IRQ_TO_BRIDGE(i) irq_to_bridge[(i)] -#define SLOT_FROM_PCI_IRQ(i) irq_to_slot[i] - -static inline int alloc_level(int cpu, int irq) -{ - struct hub_data *hub = hub_data(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - int level; - - level = find_first_zero_bit(hub->irq_alloc_mask, LEVELS_PER_SLICE); - if (level >= LEVELS_PER_SLICE) - panic("Cpu %d flooded with devices", cpu); - - __set_bit(level, hub->irq_alloc_mask); - si->level_to_irq[level] = irq; - - return level; -} - -static inline int find_level(cpuid_t *cpunum, int irq) -{ - int cpu, i; - - for_each_online_cpu(cpu) { - struct slice_data *si = cpu_data[cpu].data; - - for (i = BASE_PCI_IRQ; i < LEVELS_PER_SLICE; i++) - if (si->level_to_irq[i] == irq) { - *cpunum = cpu; - - return i; - } - } - - panic("Could not identify cpu/level for irq %d", irq); -} - -static int intr_connect_level(int cpu, int bit) -{ - nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - - set_bit(bit, si->irq_enable_mask); - - if (!cputoslice(cpu)) { - REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); - } else { - REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); - } - - return 0; -} - -static int intr_disconnect_level(int cpu, int bit) -{ - nasid_t nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - struct slice_data *si = cpu_data[cpu].data; - - clear_bit(bit, si->irq_enable_mask); - - if (!cputoslice(cpu)) { - REMOTE_HUB_S(nasid, PI_INT_MASK0_A, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_A, si->irq_enable_mask[1]); - } else { - REMOTE_HUB_S(nasid, PI_INT_MASK0_B, si->irq_enable_mask[0]); - REMOTE_HUB_S(nasid, PI_INT_MASK1_B, si->irq_enable_mask[1]); - } - - return 0; -} - -/* Startup one of the (PCI ...) IRQs routes over a bridge. */ -static unsigned int startup_bridge_irq(struct irq_data *d) -{ - struct bridge_controller *bc; - bridgereg_t device; - bridge_t *bridge; - int pin, swlevel; - cpuid_t cpu; - - pin = SLOT_FROM_PCI_IRQ(d->irq); - bc = IRQ_TO_BRIDGE(d->irq); - bridge = bc->base; - - pr_debug("bridge_startup(): irq= 0x%x pin=%d\n", d->irq, pin); - /* - * "map" irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - swlevel = find_level(&cpu, d->irq); - bridge->b_int_addr[pin].addr = (0x20000 | swlevel | (bc->nasid << 8)); - bridge->b_int_enable |= (1 << pin); - bridge->b_int_enable |= 0x7ffffe00; /* more stuff in int_enable */ - - /* - * Enable sending of an interrupt clear packt to the hub on a high to - * low transition of the interrupt pin. - * - * IRIX sets additional bits in the address which are documented as - * reserved in the bridge docs. - */ - bridge->b_int_mode |= (1UL << pin); - - /* - * We assume the bridge to have a 1:1 mapping between devices - * (slots) and intr pins. - */ - device = bridge->b_int_device; - device &= ~(7 << (pin*3)); - device |= (pin << (pin*3)); - bridge->b_int_device = device; - - bridge->b_wid_tflush; - - intr_connect_level(cpu, swlevel); - - return 0; /* Never anything pending. */ -} - -/* Shutdown one of the (PCI ...) IRQs routes over a bridge. */ -static void shutdown_bridge_irq(struct irq_data *d) -{ - struct bridge_controller *bc = IRQ_TO_BRIDGE(d->irq); - bridge_t *bridge = bc->base; - int pin, swlevel; - cpuid_t cpu; - - pr_debug("bridge_shutdown: irq 0x%x\n", d->irq); - pin = SLOT_FROM_PCI_IRQ(d->irq); - - /* - * map irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - swlevel = find_level(&cpu, d->irq); - intr_disconnect_level(cpu, swlevel); - - bridge->b_int_enable &= ~(1 << pin); - bridge->b_wid_tflush; -} - -static inline void enable_bridge_irq(struct irq_data *d) -{ - cpuid_t cpu; - int swlevel; - - swlevel = find_level(&cpu, d->irq); /* Criminal offence */ - intr_connect_level(cpu, swlevel); -} - -static inline void disable_bridge_irq(struct irq_data *d) -{ - cpuid_t cpu; - int swlevel; - - swlevel = find_level(&cpu, d->irq); /* Criminal offence */ - intr_disconnect_level(cpu, swlevel); -} - -static struct irq_chip bridge_irq_type = { - .name = "bridge", - .irq_startup = startup_bridge_irq, - .irq_shutdown = shutdown_bridge_irq, - .irq_mask = disable_bridge_irq, - .irq_unmask = enable_bridge_irq, -}; - -void register_bridge_irq(unsigned int irq) -{ - irq_set_chip_and_handler(irq, &bridge_irq_type, handle_level_irq); -} - -int request_bridge_irq(struct bridge_controller *bc) -{ - int irq = allocate_irqno(); - int swlevel, cpu; - nasid_t nasid; - - if (irq < 0) - return irq; - - /* - * "map" irq to a swlevel greater than 6 since the first 6 bits - * of INT_PEND0 are taken - */ - cpu = bc->irq_cpu; - swlevel = alloc_level(cpu, irq); - if (unlikely(swlevel < 0)) { - free_irqno(irq); - - return -EAGAIN; - } - - /* Make sure it's not already pending when we connect it. */ - nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); - REMOTE_HUB_CLR_INTR(nasid, swlevel); - - intr_connect_level(cpu, swlevel); - - register_bridge_irq(irq); - - return irq; -} diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index 0dde6164a06f..710a59764b01 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -7,67 +7,234 @@ * Copyright (C) 1999 - 2001 Kanoj Sarcar */ -#undef DEBUG - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/types.h> #include <linux/interrupt.h> +#include <linux/irq.h> #include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/smp.h> -#include <linux/random.h> #include <linux/kernel.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> #include <linux/bitops.h> -#include <asm/bootinfo.h> #include <asm/io.h> -#include <asm/mipsregs.h> - -#include <asm/processor.h> +#include <asm/irq_cpu.h> +#include <asm/pci/bridge.h> #include <asm/sn/addrs.h> #include <asm/sn/agent.h> #include <asm/sn/arch.h> #include <asm/sn/hub.h> #include <asm/sn/intr.h> -/* - * Linux has a controller-independent x86 interrupt architecture. - * every controller has a 'controller-template', that is used - * by the main code to do the right thing. Each driver-visible - * interrupt source is transparently wired to the appropriate - * controller. Thus drivers need not be aware of the - * interrupt-controller. - * - * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC, - * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC. - * (IO-APICs assumed to be messaging to Pentium local-APICs) - * - * the code is designed to be easily extended with new/different - * interrupt controllers, without having to do assembly magic. - */ +struct hub_irq_data { + struct bridge_controller *bc; + u64 *irq_mask[2]; + cpuid_t cpu; + int bit; + int pin; +}; -extern asmlinkage void ip27_irq(void); +static DECLARE_BITMAP(hub_irq_map, IP27_HUB_IRQ_COUNT); -/* - * Find first bit set - */ -static int ms1bit(unsigned long x) +static DEFINE_PER_CPU(unsigned long [2], irq_enable_mask); + +static inline int alloc_level(void) +{ + int level; + +again: + level = find_first_zero_bit(hub_irq_map, IP27_HUB_IRQ_COUNT); + if (level >= IP27_HUB_IRQ_COUNT) + return -ENOSPC; + + if (test_and_set_bit(level, hub_irq_map)) + goto again; + + return level; +} + +static void enable_hub_irq(struct irq_data *d) +{ + struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); + unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); + + set_bit(hd->bit, mask); + __raw_writeq(mask[0], hd->irq_mask[0]); + __raw_writeq(mask[1], hd->irq_mask[1]); +} + +static void disable_hub_irq(struct irq_data *d) +{ + struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); + unsigned long *mask = per_cpu(irq_enable_mask, hd->cpu); + + clear_bit(hd->bit, mask); + __raw_writeq(mask[0], hd->irq_mask[0]); + __raw_writeq(mask[1], hd->irq_mask[1]); +} + +static unsigned int startup_bridge_irq(struct irq_data *d) +{ + struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); + struct bridge_controller *bc; + nasid_t nasid; + u32 device; + int pin; + + if (!hd) + return -EINVAL; + + pin = hd->pin; + bc = hd->bc; + + nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(hd->cpu)); + bridge_write(bc, b_int_addr[pin].addr, + (0x20000 | hd->bit | (nasid << 8))); + bridge_set(bc, b_int_enable, (1 << pin)); + bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */ + + /* + * Enable sending of an interrupt clear packt to the hub on a high to + * low transition of the interrupt pin. + * + * IRIX sets additional bits in the address which are documented as + * reserved in the bridge docs. + */ + bridge_set(bc, b_int_mode, (1UL << pin)); + + /* + * We assume the bridge to have a 1:1 mapping between devices + * (slots) and intr pins. + */ + device = bridge_read(bc, b_int_device); + device &= ~(7 << (pin*3)); + device |= (pin << (pin*3)); + bridge_write(bc, b_int_device, device); + + bridge_read(bc, b_wid_tflush); + + enable_hub_irq(d); + + return 0; /* Never anything pending. */ +} + +static void shutdown_bridge_irq(struct irq_data *d) +{ + struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); + struct bridge_controller *bc; + int pin = hd->pin; + + if (!hd) + return; + + disable_hub_irq(d); + + bc = hd->bc; + bridge_clr(bc, b_int_enable, (1 << pin)); + bridge_read(bc, b_wid_tflush); +} + +static void setup_hub_mask(struct hub_irq_data *hd, const struct cpumask *mask) +{ + nasid_t nasid; + int cpu; + + cpu = cpumask_first_and(mask, cpu_online_mask); + nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); + hd->cpu = cpu; + if (!cputoslice(cpu)) { + hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_A); + hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_A); + } else { + hd->irq_mask[0] = REMOTE_HUB_PTR(nasid, PI_INT_MASK0_B); + hd->irq_mask[1] = REMOTE_HUB_PTR(nasid, PI_INT_MASK1_B); + } + + /* Make sure it's not already pending when we connect it. */ + REMOTE_HUB_CLR_INTR(nasid, hd->bit); +} + +static int set_affinity_hub_irq(struct irq_data *d, const struct cpumask *mask, + bool force) +{ + struct hub_irq_data *hd = irq_data_get_irq_chip_data(d); + + if (!hd) + return -EINVAL; + + if (irqd_is_started(d)) + disable_hub_irq(d); + + setup_hub_mask(hd, mask); + + if (irqd_is_started(d)) + startup_bridge_irq(d); + + irq_data_update_effective_affinity(d, cpumask_of(hd->cpu)); + + return 0; +} + +static struct irq_chip hub_irq_type = { + .name = "HUB", + .irq_startup = startup_bridge_irq, + .irq_shutdown = shutdown_bridge_irq, + .irq_mask = disable_hub_irq, + .irq_unmask = enable_hub_irq, + .irq_set_affinity = set_affinity_hub_irq, +}; + +int request_bridge_irq(struct bridge_controller *bc, int pin) { - int b = 0, s; + struct hub_irq_data *hd; + struct hub_data *hub; + struct irq_desc *desc; + int swlevel; + int irq; + + hd = kzalloc(sizeof(*hd), GFP_KERNEL); + if (!hd) + return -ENOMEM; + + swlevel = alloc_level(); + if (unlikely(swlevel < 0)) { + kfree(hd); + return -EAGAIN; + } + irq = swlevel + IP27_HUB_IRQ_BASE; + + hd->bc = bc; + hd->bit = swlevel; + hd->pin = pin; + irq_set_chip_data(irq, hd); + + /* use CPU connected to nearest hub */ + hub = hub_data(NASID_TO_COMPACT_NODEID(bc->nasid)); + setup_hub_mask(hd, &hub->h_cpus); - s = 16; if (x >> 16 == 0) s = 0; b += s; x >>= s; - s = 8; if (x >> 8 == 0) s = 0; b += s; x >>= s; - s = 4; if (x >> 4 == 0) s = 0; b += s; x >>= s; - s = 2; if (x >> 2 == 0) s = 0; b += s; x >>= s; - s = 1; if (x >> 1 == 0) s = 0; b += s; + desc = irq_to_desc(irq); + desc->irq_common_data.node = bc->nasid; + cpumask_copy(desc->irq_common_data.affinity, &hub->h_cpus); - return b; + return irq; +} + +void ip27_hub_irq_init(void) +{ + int i; + + for (i = IP27_HUB_IRQ_BASE; + i < (IP27_HUB_IRQ_BASE + IP27_HUB_IRQ_COUNT); i++) + irq_set_chip_and_handler(i, &hub_irq_type, handle_level_irq); + + /* + * Some interrupts are reserved by hardware or by software convention. + * Mark these as reserved right away so they won't be used accidentally + * later. + */ + for (i = 0; i <= BASE_PCI_IRQ; i++) + set_bit(i, hub_irq_map); + + set_bit(IP_PEND0_6_63, hub_irq_map); + + for (i = NI_BRDCAST_ERR_A; i <= MSC_PANIC_INTR; i++) + set_bit(i, hub_irq_map); } /* @@ -82,23 +249,19 @@ static int ms1bit(unsigned long x) * Kanoj 05.13.00 */ -static void ip27_do_irq_mask0(void) +static void ip27_do_irq_mask0(struct irq_desc *desc) { - int irq, swlevel; - hubreg_t pend0, mask0; cpuid_t cpu = smp_processor_id(); - int pi_int_mask0 = - (cputoslice(cpu) == 0) ? PI_INT_MASK0_A : PI_INT_MASK0_B; + unsigned long *mask = per_cpu(irq_enable_mask, cpu); + u64 pend0; /* copied from Irix intpend0() */ pend0 = LOCAL_HUB_L(PI_INT_PEND0); - mask0 = LOCAL_HUB_L(pi_int_mask0); - pend0 &= mask0; /* Pick intrs we should look at */ + pend0 &= mask[0]; /* Pick intrs we should look at */ if (!pend0) return; - swlevel = ms1bit(pend0); #ifdef CONFIG_SMP if (pend0 & (1UL << CPU_RESCHED_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_RESCHED_A_IRQ); @@ -108,106 +271,66 @@ static void ip27_do_irq_mask0(void) scheduler_ipi(); } else if (pend0 & (1UL << CPU_CALL_A_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_CALL_A_IRQ); - irq_enter(); generic_smp_call_function_interrupt(); - irq_exit(); } else if (pend0 & (1UL << CPU_CALL_B_IRQ)) { LOCAL_HUB_CLR_INTR(CPU_CALL_B_IRQ); - irq_enter(); generic_smp_call_function_interrupt(); - irq_exit(); } else #endif - { - /* "map" swlevel to irq */ - struct slice_data *si = cpu_data[cpu].data; - - irq = si->level_to_irq[swlevel]; - do_IRQ(irq); - } + generic_handle_irq(__ffs(pend0) + IP27_HUB_IRQ_BASE); LOCAL_HUB_L(PI_INT_PEND0); } -static void ip27_do_irq_mask1(void) +static void ip27_do_irq_mask1(struct irq_desc *desc) { - int irq, swlevel; - hubreg_t pend1, mask1; cpuid_t cpu = smp_processor_id(); - int pi_int_mask1 = (cputoslice(cpu) == 0) ? PI_INT_MASK1_A : PI_INT_MASK1_B; - struct slice_data *si = cpu_data[cpu].data; + unsigned long *mask = per_cpu(irq_enable_mask, cpu); + u64 pend1; /* copied from Irix intpend0() */ pend1 = LOCAL_HUB_L(PI_INT_PEND1); - mask1 = LOCAL_HUB_L(pi_int_mask1); - pend1 &= mask1; /* Pick intrs we should look at */ + pend1 &= mask[1]; /* Pick intrs we should look at */ if (!pend1) return; - swlevel = ms1bit(pend1); - /* "map" swlevel to irq */ - irq = si->level_to_irq[swlevel]; - LOCAL_HUB_CLR_INTR(swlevel); - do_IRQ(irq); + generic_handle_irq(__ffs(pend1) + IP27_HUB_IRQ_BASE + 64); LOCAL_HUB_L(PI_INT_PEND1); } -static void ip27_prof_timer(void) -{ - panic("CPU %d got a profiling interrupt", smp_processor_id()); -} - -static void ip27_hub_error(void) -{ - panic("CPU %d got a hub error interrupt", smp_processor_id()); -} - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned long pending = read_c0_cause() & read_c0_status(); - extern unsigned int rt_timer_irq; - - if (pending & CAUSEF_IP4) - do_IRQ(rt_timer_irq); - else if (pending & CAUSEF_IP2) /* PI_INT_PEND_0 or CC_PEND_{A|B} */ - ip27_do_irq_mask0(); - else if (pending & CAUSEF_IP3) /* PI_INT_PEND_1 */ - ip27_do_irq_mask1(); - else if (pending & CAUSEF_IP5) - ip27_prof_timer(); - else if (pending & CAUSEF_IP6) - ip27_hub_error(); -} - -void __init arch_init_irq(void) -{ -} - void install_ipi(void) { - int slice = LOCAL_HUB_L(PI_CPU_NUM); int cpu = smp_processor_id(); - struct slice_data *si = cpu_data[cpu].data; - struct hub_data *hub = hub_data(cpu_to_node(cpu)); + unsigned long *mask = per_cpu(irq_enable_mask, cpu); + int slice = LOCAL_HUB_L(PI_CPU_NUM); int resched, call; resched = CPU_RESCHED_A_IRQ + slice; - __set_bit(resched, hub->irq_alloc_mask); - __set_bit(resched, si->irq_enable_mask); + set_bit(resched, mask); LOCAL_HUB_CLR_INTR(resched); call = CPU_CALL_A_IRQ + slice; - __set_bit(call, hub->irq_alloc_mask); - __set_bit(call, si->irq_enable_mask); + set_bit(call, mask); LOCAL_HUB_CLR_INTR(call); if (slice == 0) { - LOCAL_HUB_S(PI_INT_MASK0_A, si->irq_enable_mask[0]); - LOCAL_HUB_S(PI_INT_MASK1_A, si->irq_enable_mask[1]); + LOCAL_HUB_S(PI_INT_MASK0_A, mask[0]); + LOCAL_HUB_S(PI_INT_MASK1_A, mask[1]); } else { - LOCAL_HUB_S(PI_INT_MASK0_B, si->irq_enable_mask[0]); - LOCAL_HUB_S(PI_INT_MASK1_B, si->irq_enable_mask[1]); + LOCAL_HUB_S(PI_INT_MASK0_B, mask[0]); + LOCAL_HUB_S(PI_INT_MASK1_B, mask[1]); } } + +void __init arch_init_irq(void) +{ + mips_cpu_irq_init(); + ip27_hub_irq_init(); + + irq_set_percpu_devid(IP27_HUB_PEND0_IRQ); + irq_set_chained_handler(IP27_HUB_PEND0_IRQ, ip27_do_irq_mask0); + irq_set_percpu_devid(IP27_HUB_PEND1_IRQ); + irq_set_chained_handler(IP27_HUB_PEND1_IRQ, ip27_do_irq_mask1); +} diff --git a/arch/mips/sgi-ip27/ip27-irqno.c b/arch/mips/sgi-ip27/ip27-irqno.c deleted file mode 100644 index 957ab58e1c00..000000000000 --- a/arch/mips/sgi-ip27/ip27-irqno.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/types.h> - -#include <asm/barrier.h> - -static DECLARE_BITMAP(irq_map, NR_IRQS); - -int allocate_irqno(void) -{ - int irq; - -again: - irq = find_first_zero_bit(irq_map, NR_IRQS); - - if (irq >= NR_IRQS) - return -ENOSPC; - - if (test_and_set_bit(irq, irq_map)) - goto again; - - return irq; -} - -/* - * Allocate the 16 legacy interrupts for i8259 devices. This happens early - * in the kernel initialization so treating allocation failure as BUG() is - * ok. - */ -void __init alloc_legacy_irqno(void) -{ - int i; - - for (i = 0; i <= 16; i++) - BUG_ON(test_and_set_bit(i, irq_map)); -} - -void free_irqno(unsigned int irq) -{ - smp_mb__before_atomic(); - clear_bit(irq, irq_map); - smp_mb__after_atomic(); -} diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index 813d13f92957..fb077a947575 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -44,7 +44,7 @@ static int is_fine_dirmode(void) return ((LOCAL_HUB_L(NI_STATUS_REV_ID) & NSRI_REGIONSIZE_MASK) >> NSRI_REGIONSIZE_SHFT) & REGIONSIZE_FINE; } -static hubreg_t get_region(cnodeid_t cnode) +static u64 get_region(cnodeid_t cnode) { if (fine_mode) return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_FINEREG_SHFT; @@ -52,9 +52,9 @@ static hubreg_t get_region(cnodeid_t cnode) return COMPACT_TO_NASID_NODEID(cnode) >> NASID_TO_COARSEREG_SHFT; } -static hubreg_t region_mask; +static u64 region_mask; -static void gen_region_mask(hubreg_t *region_mask) +static void gen_region_mask(u64 *region_mask) { cnodeid_t cnode; @@ -154,11 +154,11 @@ static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b) } if (router_a == NULL) { - printk("node_distance: router_a NULL\n"); + pr_info("node_distance: router_a NULL\n"); return -1; } if (router_b == NULL) { - printk("node_distance: router_b NULL\n"); + pr_info("node_distance: router_b NULL\n"); return -1; } @@ -203,17 +203,17 @@ static void __init dump_topology(void) klrou_t *router; cnodeid_t row, col; - printk("************** Topology ********************\n"); + pr_info("************** Topology ********************\n"); - printk(" "); + pr_info(" "); for_each_online_node(col) - printk("%02d ", col); - printk("\n"); + pr_cont("%02d ", col); + pr_cont("\n"); for_each_online_node(row) { - printk("%02d ", row); + pr_info("%02d ", row); for_each_online_node(col) - printk("%2d ", node_distance(row, col)); - printk("\n"); + pr_cont("%2d ", node_distance(row, col)); + pr_cont("\n"); } for_each_online_node(cnode) { @@ -230,7 +230,7 @@ static void __init dump_topology(void) do { if (brd->brd_flags & DUPLICATE_BOARD) continue; - printk("Router %d:", router_num); + pr_cont("Router %d:", router_num); router_num++; router = (klrou_t *)NODE_OFFSET_TO_K0(NASID_GET(brd), brd->brd_compts[0]); @@ -244,11 +244,11 @@ static void __init dump_topology(void) router->rou_port[port].port_offset); if (dest_brd->brd_type == KLTYPE_IP27) - printk(" %d", dest_brd->brd_nasid); + pr_cont(" %d", dest_brd->brd_nasid); if (dest_brd->brd_type == KLTYPE_ROUTER) - printk(" r"); + pr_cont(" r"); } - printk("\n"); + pr_cont("\n"); } while ( (brd = find_lboard_class(KLCF_NEXT(brd), KLTYPE_ROUTER)) ); } @@ -373,7 +373,7 @@ static void __init szmem(void) if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) > (slot0sz << PAGE_SHIFT)) { - printk("Ignoring slot %d onwards on node %d\n", + pr_info("Ignoring slot %d onwards on node %d\n", slot, node); slot = MAX_MEM_SLOTS; continue; diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 8ac2bfa35fb6..3aae388561d9 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -62,75 +62,75 @@ void nmi_cpu_eframe_save(nasid_t nasid, int slice) (TO_UNCAC(TO_NODE(nasid, IP27_NMI_KREGS_OFFSET)) + slice * IP27_NMI_KREGS_CPU_SIZE); - printk("NMI nasid %d: slice %d\n", nasid, slice); + pr_emerg("NMI nasid %d: slice %d\n", nasid, slice); /* * Saved main processor registers */ for (i = 0; i < 32; ) { if ((i % 4) == 0) - printk("$%2d :", i); - printk(" %016lx", nr->gpr[i]); + pr_emerg("$%2d :", i); + pr_cont(" %016lx", nr->gpr[i]); i++; if ((i % 4) == 0) - printk("\n"); + pr_cont("\n"); } - printk("Hi : (value lost)\n"); - printk("Lo : (value lost)\n"); + pr_emerg("Hi : (value lost)\n"); + pr_emerg("Lo : (value lost)\n"); /* * Saved cp0 registers */ - printk("epc : %016lx %pS\n", nr->epc, (void *) nr->epc); - printk("%s\n", print_tainted()); - printk("ErrEPC: %016lx %pS\n", nr->error_epc, (void *) nr->error_epc); - printk("ra : %016lx %pS\n", nr->gpr[31], (void *) nr->gpr[31]); - printk("Status: %08lx ", nr->sr); + pr_emerg("epc : %016lx %pS\n", nr->epc, (void *)nr->epc); + pr_emerg("%s\n", print_tainted()); + pr_emerg("ErrEPC: %016lx %pS\n", nr->error_epc, (void *)nr->error_epc); + pr_emerg("ra : %016lx %pS\n", nr->gpr[31], (void *)nr->gpr[31]); + pr_emerg("Status: %08lx ", nr->sr); if (nr->sr & ST0_KX) - printk("KX "); + pr_cont("KX "); if (nr->sr & ST0_SX) - printk("SX "); + pr_cont("SX "); if (nr->sr & ST0_UX) - printk("UX "); + pr_cont("UX "); switch (nr->sr & ST0_KSU) { case KSU_USER: - printk("USER "); + pr_cont("USER "); break; case KSU_SUPERVISOR: - printk("SUPERVISOR "); + pr_cont("SUPERVISOR "); break; case KSU_KERNEL: - printk("KERNEL "); + pr_cont("KERNEL "); break; default: - printk("BAD_MODE "); + pr_cont("BAD_MODE "); break; } if (nr->sr & ST0_ERL) - printk("ERL "); + pr_cont("ERL "); if (nr->sr & ST0_EXL) - printk("EXL "); + pr_cont("EXL "); if (nr->sr & ST0_IE) - printk("IE "); - printk("\n"); + pr_cont("IE "); + pr_cont("\n"); - printk("Cause : %08lx\n", nr->cause); - printk("PrId : %08x\n", read_c0_prid()); - printk("BadVA : %016lx\n", nr->badva); - printk("CErr : %016lx\n", nr->cache_err); - printk("NMI_SR: %016lx\n", nr->nmi_sr); + pr_emerg("Cause : %08lx\n", nr->cause); + pr_emerg("PrId : %08x\n", read_c0_prid()); + pr_emerg("BadVA : %016lx\n", nr->badva); + pr_emerg("CErr : %016lx\n", nr->cache_err); + pr_emerg("NMI_SR: %016lx\n", nr->nmi_sr); - printk("\n"); + pr_emerg("\n"); } void nmi_dump_hub_irq(nasid_t nasid, int slice) { - hubreg_t mask0, mask1, pend0, pend1; + u64 mask0, mask1, pend0, pend1; if (slice == 0) { /* Slice A */ mask0 = REMOTE_HUB_L(nasid, PI_INT_MASK0_A); @@ -143,9 +143,9 @@ void nmi_dump_hub_irq(nasid_t nasid, int slice) pend0 = REMOTE_HUB_L(nasid, PI_INT_PEND0); pend1 = REMOTE_HUB_L(nasid, PI_INT_PEND1); - printk("PI_INT_MASK0: %16Lx PI_INT_MASK1: %16Lx\n", mask0, mask1); - printk("PI_INT_PEND0: %16Lx PI_INT_PEND1: %16Lx\n", pend0, pend1); - printk("\n\n"); + pr_emerg("PI_INT_MASK0: %16llx PI_INT_MASK1: %16llx\n", mask0, mask1); + pr_emerg("PI_INT_PEND0: %16llx PI_INT_PEND1: %16llx\n", pend0, pend1); + pr_emerg("\n\n"); } /* diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index 545446dfe7fa..20b81209c6b8 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -177,7 +177,7 @@ static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action) ip27_send_ipi_single(i, action); } -static void ip27_init_secondary(void) +static void ip27_init_cpu(void) { per_cpu_init(); } @@ -235,9 +235,10 @@ static void __init ip27_prepare_cpus(unsigned int max_cpus) const struct plat_smp_ops ip27_smp_ops = { .send_ipi_single = ip27_send_ipi_single, .send_ipi_mask = ip27_send_ipi_mask, - .init_secondary = ip27_init_secondary, + .init_secondary = ip27_init_cpu, .smp_finish = ip27_smp_finish, .boot_secondary = ip27_boot_secondary, .smp_setup = ip27_smp_setup, .prepare_cpus = ip27_prepare_cpus, + .prepare_boot_cpu = ip27_init_cpu, }; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9d55247533a5..9b4b9ac621a3 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -38,20 +38,6 @@ #include <asm/sn/sn0/hubio.h> #include <asm/pci/bridge.h> -static void enable_rt_irq(struct irq_data *d) -{ -} - -static void disable_rt_irq(struct irq_data *d) -{ -} - -static struct irq_chip rt_irq_type = { - .name = "SN HUB RT timer", - .irq_mask = disable_rt_irq, - .irq_unmask = enable_rt_irq, -}; - static int rt_next_event(unsigned long delta, struct clock_event_device *evt) { unsigned int cpu = smp_processor_id(); @@ -65,8 +51,6 @@ static int rt_next_event(unsigned long delta, struct clock_event_device *evt) return LOCAL_HUB_L(PI_RT_COUNT) >= cnt ? -ETIME : 0; } -unsigned int rt_timer_irq; - static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); static DEFINE_PER_CPU(char [11], hub_rt_name); @@ -87,6 +71,7 @@ static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) struct irqaction hub_rt_irqaction = { .handler = hub_rt_counter_handler, + .percpu_dev_id = &hub_rt_clockevent, .flags = IRQF_PERCPU | IRQF_TIMER, .name = "hub-rt", }; @@ -107,7 +92,6 @@ void hub_rt_clock_event_init(void) unsigned int cpu = smp_processor_id(); struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); unsigned char *name = per_cpu(hub_rt_name, cpu); - int irq = rt_timer_irq; sprintf(name, "hub-rt %d", cpu); cd->name = name; @@ -118,29 +102,19 @@ void hub_rt_clock_event_init(void) cd->min_delta_ns = clockevent_delta2ns(0x300, cd); cd->min_delta_ticks = 0x300; cd->rating = 200; - cd->irq = irq; + cd->irq = IP27_RT_TIMER_IRQ; cd->cpumask = cpumask_of(cpu); cd->set_next_event = rt_next_event; clockevents_register_device(cd); + + enable_percpu_irq(IP27_RT_TIMER_IRQ, IRQ_TYPE_NONE); } static void __init hub_rt_clock_event_global_init(void) { - int irq; - - do { - smp_wmb(); - irq = rt_timer_irq; - if (irq) - break; - - irq = allocate_irqno(); - if (irq < 0) - panic("Allocation of irq number for timer failed"); - } while (xchg(&rt_timer_irq, irq)); - - irq_set_chip_and_handler(irq, &rt_irq_type, handle_percpu_irq); - setup_irq(irq, &hub_rt_irqaction); + irq_set_handler(IP27_RT_TIMER_IRQ, handle_percpu_devid_irq); + irq_set_percpu_devid(IP27_RT_TIMER_IRQ); + setup_percpu_irq(IP27_RT_TIMER_IRQ, &hub_rt_irqaction); } static u64 hub_rt_read(struct clocksource *cs) @@ -194,8 +168,6 @@ void cpu_time_init(void) panic("No information about myself?"); printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); - - set_c0_status(SRB_TIMOCLK); } void hub_rtc_init(cnodeid_t cnode) diff --git a/arch/mips/sgi-ip27/ip27-xtalk.c b/arch/mips/sgi-ip27/ip27-xtalk.c index 4fe5678ba74d..ce06aaa115ae 100644 --- a/arch/mips/sgi-ip27/ip27-xtalk.c +++ b/arch/mips/sgi-ip27/ip27-xtalk.c @@ -99,7 +99,7 @@ static int xbow_probe(nasid_t nasid) return 0; } -void xtalk_probe_node(cnodeid_t nid) +static void xtalk_probe_node(cnodeid_t nid) { volatile u64 hubreg; nasid_t nasid; @@ -133,3 +133,14 @@ void xtalk_probe_node(cnodeid_t nid) break; } } + +static int __init xtalk_init(void) +{ + cnodeid_t cnode; + + for_each_online_node(cnode) + xtalk_probe_node(cnode); + + return 0; +} +arch_initcall(xtalk_init); diff --git a/drivers/soc/lantiq/Makefile b/drivers/soc/lantiq/Makefile index be9e866d53e5..35aa86bd1023 100644 --- a/drivers/soc/lantiq/Makefile +++ b/drivers/soc/lantiq/Makefile @@ -1,2 +1 @@ obj-y += fpi-bus.o -obj-$(CONFIG_XRX200_PHY_FW) += gphy.o diff --git a/drivers/soc/lantiq/gphy.c b/drivers/soc/lantiq/gphy.c deleted file mode 100644 index feeb17cebc25..000000000000 --- a/drivers/soc/lantiq/gphy.c +++ /dev/null @@ -1,224 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published - * by the Free Software Foundation. - * - * Copyright (C) 2012 John Crispin <blogic@phrozen.org> - * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com> - * Copyright (C) 2017 Hauke Mehrtens <hauke@hauke-m.de> - */ - -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/firmware.h> -#include <linux/mfd/syscon.h> -#include <linux/module.h> -#include <linux/reboot.h> -#include <linux/regmap.h> -#include <linux/reset.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#include <linux/property.h> -#include <dt-bindings/mips/lantiq_rcu_gphy.h> - -#include <lantiq_soc.h> - -#define XRX200_GPHY_FW_ALIGN (16 * 1024) - -struct xway_gphy_priv { - struct clk *gphy_clk_gate; - struct reset_control *gphy_reset; - struct reset_control *gphy_reset2; - void __iomem *membase; - char *fw_name; -}; - -struct xway_gphy_match_data { - char *fe_firmware_name; - char *ge_firmware_name; -}; - -static const struct xway_gphy_match_data xrx200a1x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", -}; - -static const struct xway_gphy_match_data xrx200a2x_gphy_data = { - .fe_firmware_name = "lantiq/xrx200_phy22f_a22.bin", - .ge_firmware_name = "lantiq/xrx200_phy11g_a22.bin", -}; - -static const struct xway_gphy_match_data xrx300_gphy_data = { - .fe_firmware_name = "lantiq/xrx300_phy22f_a21.bin", - .ge_firmware_name = "lantiq/xrx300_phy11g_a21.bin", -}; - -static const struct of_device_id xway_gphy_match[] = { - { .compatible = "lantiq,xrx200a1x-gphy", .data = &xrx200a1x_gphy_data }, - { .compatible = "lantiq,xrx200a2x-gphy", .data = &xrx200a2x_gphy_data }, - { .compatible = "lantiq,xrx300-gphy", .data = &xrx300_gphy_data }, - { .compatible = "lantiq,xrx330-gphy", .data = &xrx300_gphy_data }, - {}, -}; -MODULE_DEVICE_TABLE(of, xway_gphy_match); - -static int xway_gphy_load(struct device *dev, struct xway_gphy_priv *priv, - dma_addr_t *dev_addr) -{ - const struct firmware *fw; - void *fw_addr; - dma_addr_t dma_addr; - size_t size; - int ret; - - ret = request_firmware(&fw, priv->fw_name, dev); - if (ret) { - dev_err(dev, "failed to load firmware: %s, error: %i\n", - priv->fw_name, ret); - return ret; - } - - /* - * GPHY cores need the firmware code in a persistent and contiguous - * memory area with a 16 kB boundary aligned start address. - */ - size = fw->size + XRX200_GPHY_FW_ALIGN; - - fw_addr = dmam_alloc_coherent(dev, size, &dma_addr, GFP_KERNEL); - if (fw_addr) { - fw_addr = PTR_ALIGN(fw_addr, XRX200_GPHY_FW_ALIGN); - *dev_addr = ALIGN(dma_addr, XRX200_GPHY_FW_ALIGN); - memcpy(fw_addr, fw->data, fw->size); - } else { - dev_err(dev, "failed to alloc firmware memory\n"); - ret = -ENOMEM; - } - - release_firmware(fw); - - return ret; -} - -static int xway_gphy_of_probe(struct platform_device *pdev, - struct xway_gphy_priv *priv) -{ - struct device *dev = &pdev->dev; - const struct xway_gphy_match_data *gphy_fw_name_cfg; - u32 gphy_mode; - int ret; - struct resource *res_gphy; - - gphy_fw_name_cfg = of_device_get_match_data(dev); - - priv->gphy_clk_gate = devm_clk_get(dev, NULL); - if (IS_ERR(priv->gphy_clk_gate)) { - dev_err(dev, "Failed to lookup gate clock\n"); - return PTR_ERR(priv->gphy_clk_gate); - } - - res_gphy = platform_get_resource(pdev, IORESOURCE_MEM, 0); - priv->membase = devm_ioremap_resource(dev, res_gphy); - if (IS_ERR(priv->membase)) - return PTR_ERR(priv->membase); - - priv->gphy_reset = devm_reset_control_get(dev, "gphy"); - if (IS_ERR(priv->gphy_reset)) { - if (PTR_ERR(priv->gphy_reset) != -EPROBE_DEFER) - dev_err(dev, "Failed to lookup gphy reset\n"); - return PTR_ERR(priv->gphy_reset); - } - - priv->gphy_reset2 = devm_reset_control_get_optional(dev, "gphy2"); - if (IS_ERR(priv->gphy_reset2)) - return PTR_ERR(priv->gphy_reset2); - - ret = device_property_read_u32(dev, "lantiq,gphy-mode", &gphy_mode); - /* Default to GE mode */ - if (ret) - gphy_mode = GPHY_MODE_GE; - - switch (gphy_mode) { - case GPHY_MODE_FE: - priv->fw_name = gphy_fw_name_cfg->fe_firmware_name; - break; - case GPHY_MODE_GE: - priv->fw_name = gphy_fw_name_cfg->ge_firmware_name; - break; - default: - dev_err(dev, "Unknown GPHY mode %d\n", gphy_mode); - return -EINVAL; - } - - return 0; -} - -static int xway_gphy_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct xway_gphy_priv *priv; - dma_addr_t fw_addr = 0; - int ret; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - ret = xway_gphy_of_probe(pdev, priv); - if (ret) - return ret; - - ret = clk_prepare_enable(priv->gphy_clk_gate); - if (ret) - return ret; - - ret = xway_gphy_load(dev, priv, &fw_addr); - if (ret) { - clk_disable_unprepare(priv->gphy_clk_gate); - return ret; - } - - reset_control_assert(priv->gphy_reset); - reset_control_assert(priv->gphy_reset2); - - iowrite32be(fw_addr, priv->membase); - - reset_control_deassert(priv->gphy_reset); - reset_control_deassert(priv->gphy_reset2); - - platform_set_drvdata(pdev, priv); - - return ret; -} - -static int xway_gphy_remove(struct platform_device *pdev) -{ - struct xway_gphy_priv *priv = platform_get_drvdata(pdev); - - iowrite32be(0, priv->membase); - - clk_disable_unprepare(priv->gphy_clk_gate); - - return 0; -} - -static struct platform_driver xway_gphy_driver = { - .probe = xway_gphy_probe, - .remove = xway_gphy_remove, - .driver = { - .name = "xway-rcu-gphy", - .of_match_table = xway_gphy_match, - }, -}; - -module_platform_driver(xway_gphy_driver); - -MODULE_FIRMWARE("lantiq/xrx300_phy11g_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx300_phy22f_a21.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy11g_a22.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a14.bin"); -MODULE_FIRMWARE("lantiq/xrx200_phy22f_a22.bin"); -MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>"); -MODULE_DESCRIPTION("Lantiq XWAY GPHY Firmware Loader"); -MODULE_LICENSE("GPL"); diff --git a/include/dt-bindings/clock/ath79-clk.h b/include/dt-bindings/clock/ath79-clk.h index 27359ad83904..dcc679a7ad85 100644 --- a/include/dt-bindings/clock/ath79-clk.h +++ b/include/dt-bindings/clock/ath79-clk.h @@ -13,7 +13,9 @@ #define ATH79_CLK_CPU 0 #define ATH79_CLK_DDR 1 #define ATH79_CLK_AHB 2 +#define ATH79_CLK_REF 3 +#define ATH79_CLK_MDIO 4 -#define ATH79_CLK_END 3 +#define ATH79_CLK_END 5 #endif /* __DT_BINDINGS_ATH79_CLK_H */ |