Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "Mainly driver updates this time around.

  There's a single patch to the core clk framework that simplifies a
  runtime PM call. Otherwise the majority of the diff falls to a few SoC
  drivers: Qualcomm, STM32 and MediaTek. Those SoCs gain some new
  hardware support and what comes along with that is quite a few lines
  of data and some clk_ops code.

  Beyond the new hardware support we have the usual pile of driver
  updates that add missing clks on already supported SoCs or fix up
  problems like bad clk tree descriptions. It's nice to see that more
  drivers are moving to clk_hw based APIs too.

  New Drivers:
   - Add STM32MP13 RCC driver (Reset Clock Controller)
   - MediaTek MT8186 SoC clk support
   - Airoha EN7523 SoC system clocks
   - Clock driver for exynosautov9 SoC
   - Renesas R-Car V4H and RZ/V2M SoCs
   - Renesas RZ/G2UL SoC
   - LPASS clk driver for Qualcomm sc7280 SoC
   - GCC clk driver for Qualcomm SC8280XP SoC

  Updates:
   - SDCC uses floor clk ops on Qualcomm MSM8976
   - Add modem reset and fix RPM clks on Qualcomm MSM8976
   - Add the two missing CLKOUT clocks for U8500/DB8500 SoC
   - Mark some clks critical on Ingenic X1000
   - Convert ux500 to clk_hw
   - Move MediaTek driver to clk_hw provider APIs
   - Use i2c driver probe_new to avoid id scans
   - Convert a number of Rockchip dt bindings to YAML
   - Mark hclk_vo critical on Rockchip rk3568
   - Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usage
   - Various cleanups like memory allocation error checks and plugged
     leaks
   - Allwinner H6 RTC clock support
   - Allwinner H616 32 kHz clock support
   - Add the Universal Flash Storage clock on Renesas R-Car S4-8
   - Add I2C, SSIF-2 (sound), USB, CANFD, OSTM (timer), WDT, SPI Multi
     I/O Bus, RSPI, TSU (thermal), and ADC clocks and resets on Renesas
     RZ/G2UL
   - Add display clock support on Renesas RZ/G2L
   - Add RPC (QSPI/HyperFlash) clocks on Renesas R-Car E3 and D3
   - Add 27 MHz phy PLL ref clock on i.MX
   - Add mcore_booted module parameter to tell kernel M core has already
     booted for i.MX
   - Remove snvs clock on i.MX because it was for secure world only
   - Add dt bindings for i.MX8MN GPT
   - Add DISP2 pixel clock for i.MX8MP
   - Add clkout1/2 for i.MX8MP
   - Fix parent clock of ubs_root_clk for i.MX8MP
   - Implement better RCG parking on Qualcomm SoCs using the shared RCG
     clk ops
   - Kerneldoc fixes
   - Switch Tegra BPMP to determine_rate clk op
   - Add a pointer to dt schema for generic clock bindings"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (168 commits)
  Revert "clk: qcom: regmap-mux: add pipe clk implementation"
  Revert "clk: qcom: gcc-sc7280: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  Revert "clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks"
  clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc()
  clk: stm32mp13: add safe mux management
  clk: stm32mp13: add multi mux function
  clk: stm32mp13: add all STM32MP13 kernel clocks
  clk: stm32mp13: add all STM32MP13 peripheral clocks
  clk: stm32mp13: manage secured clocks
  clk: stm32mp13: add composite clock
  clk: stm32mp13: add stm32 divider clock
  clk: stm32mp13: add stm32_gate management
  clk: stm32mp13: add stm32_mux clock management
  clk: stm32: Introduce STM32MP13 RCC drivers (Reset Clock Controller)
  dt-bindings: rcc: stm32: add new compatible for STM32MP13 SoC
  clk: ti: clkctrl: replace usage of found with dedicated list iterator variable
  clk: ti: composite: Prefer kcalloc over open coded arithmetic
  dt-bindings: clock: exynosautov9: correct count of NR_CLK
  clk: mediatek: mt8173: Switch to clk_hw provider APIs
  clk: mediatek: Switch to clk_hw provider APIs
  ...

33 files changed, 1175 insertions, 773 deletions

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
new file mode 100644
index 000000000000..cf1002c3efa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-clock.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek Functional Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The devices provide clock gate control in different IP blocks.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-imp_iic_wrap
+          - mediatek,mt8186-mfgsys
+          - mediatek,mt8186-wpesys
+          - mediatek,mt8186-imgsys1
+          - mediatek,mt8186-imgsys2
+          - mediatek,mt8186-vdecsys
+          - mediatek,mt8186-vencsys
+          - mediatek,mt8186-camsys
+          - mediatek,mt8186-camsys_rawa
+          - mediatek,mt8186-camsys_rawb
+          - mediatek,mt8186-mdpsys
+          - mediatek,mt8186-ipesys
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    imp_iic_wrap: clock-controller@11017000 {
+        compatible = "mediatek,mt8186-imp_iic_wrap";
+        reg = <0x11017000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
new file mode 100644
index 000000000000..0886e2e335bb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mt8186-sys-clock.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/arm/mediatek/mediatek,mt8186-sys-clock.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: MediaTek System Clock Controller for MT8186
+
+maintainers:
+  - Chun-Jie Chen <chun-jie.chen@mediatek.com>
+
+description: |
+  The clock architecture in MediaTek like below
+  PLLs -->
+          dividers -->
+                      muxes
+                           -->
+                              clock gate
+
+  The apmixedsys provides most of PLLs which generated from SoC 26m.
+  The topckgen provides dividers and muxes which provide the clock source to other IP blocks.
+  The infracfg_ao provides clock gate in peripheral and infrastructure IP blocks.
+  The mcusys provides mux control to select the clock source in AP MCU.
+  The device nodes also provide the system control capacity for configuration.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,mt8186-mcusys
+          - mediatek,mt8186-topckgen
+          - mediatek,mt8186-infracfg_ao
+          - mediatek,mt8186-apmixedsys
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  '#clock-cells':
+    const: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    topckgen: syscon@10000000 {
+        compatible = "mediatek,mt8186-topckgen", "syscon";
+        reg = <0x10000000 0x1000>;
+        #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
new file mode 100644
index 000000000000..d60e74654809
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/airoha,en7523-scu.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/airoha,en7523-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: EN7523 Clock Device Tree Bindings
+
+maintainers:
+  - Felix Fietkau <nbd@nbd.name>
+  - John Crispin <nbd@nbd.name>
+
+description: |
+  This node defines the System Control Unit of the EN7523 SoC,
+  a collection of registers configuring many different aspects of the SoC.
+
+  The clock driver uses it to read and configure settings of the
+  PLL controller, which provides clocks for the CPU, the bus and
+  other SoC internal peripherals.
+
+  Each clock is assigned an identifier and client nodes use this identifier
+  to specify which clock they consume.
+
+  All these identifiers can be found in:
+  [1]: <include/dt-bindings/clock/en7523-clk.h>.
+
+  The clocks are provided inside a system controller node.
+
+properties:
+  compatible:
+    items:
+      - const: airoha,en7523-scu
+
+  reg:
+    maxItems: 2
+
+  "#clock-cells":
+    description:
+      The first cell indicates the clock number, see [1] for available
+      clocks.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+    scu: system-controller@1fa20000 {
+      compatible = "airoha,en7523-scu";
+      reg = <0x1fa20000 0x400>,
+            <0x1fb00000 0x1000>;
+      #clock-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt
index f2ea53832ac6..6fe541368889 100644
--- a/Documentation/devicetree/bindings/clock/clock-bindings.txt
+++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -1,186 +1,2 @@
-This binding is a work-in-progress, and are based on some experimental
-work by benh[1].
-
-Sources of clock signal can be represented by any node in the device
-tree.  Those nodes are designated as clock providers.  Clock consumer
-nodes use a phandle and clock specifier pair to connect clock provider
-outputs to clock inputs.  Similar to the gpio specifiers, a clock
-specifier is an array of zero, one or more cells identifying the clock
-output on a device.  The length of a clock specifier is defined by the
-value of a #clock-cells property in the clock provider node.
-
-[1] https://patchwork.ozlabs.org/patch/31551/
-
-==Clock providers==
-
-Required properties:
-#clock-cells:	   Number of cells in a clock specifier; Typically 0 for nodes
-		   with a single clock output and 1 for nodes with multiple
-		   clock outputs.
-
-Optional properties:
-clock-output-names: Recommended to be a list of strings of clock output signal
-		    names indexed by the first cell in the clock specifier.
-		    However, the meaning of clock-output-names is domain
-		    specific to the clock provider, and is only provided to
-		    encourage using the same meaning for the majority of clock
-		    providers.  This format may not work for clock providers
-		    using a complex clock specifier format.  In those cases it
-		    is recommended to omit this property and create a binding
-		    specific names property.
-
-		    Clock consumer nodes must never directly reference
-		    the provider's clock-output-names property.
-
-For example:
-
-    oscillator {
-        #clock-cells = <1>;
-        clock-output-names = "ckil", "ckih";
-    };
-
-- this node defines a device with two clock outputs, the first named
-  "ckil" and the second named "ckih".  Consumer nodes always reference
-  clocks by index. The names should reflect the clock output signal
-  names for the device.
-
-clock-indices:	   If the identifying number for the clocks in the node
-		   is not linear from zero, then this allows the mapping of
-		   identifiers into the clock-output-names array.
-
-For example, if we have two clocks <&oscillator 1> and <&oscillator 3>:
-
-	oscillator {
-		compatible = "myclocktype";
-		#clock-cells = <1>;
-		clock-indices = <1>, <3>;
-		clock-output-names = "clka", "clkb";
-	}
-
-	This ensures we do not have any empty strings in clock-output-names
-
-
-==Clock consumers==
-
-Required properties:
-clocks:		List of phandle and clock specifier pairs, one pair
-		for each clock input to the device.  Note: if the
-		clock provider specifies '0' for #clock-cells, then
-		only the phandle portion of the pair will appear.
-
-Optional properties:
-clock-names:	List of clock input name strings sorted in the same
-		order as the clocks property.  Consumers drivers
-		will use clock-names to match clock input names
-		with clocks specifiers.
-clock-ranges:	Empty property indicating that child nodes can inherit named
-		clocks from this node. Useful for bus nodes to provide a
-		clock to their children.
-
-For example:
-
-    device {
-        clocks = <&osc 1>, <&ref 0>;
-        clock-names = "baud", "register";
-    };
-
-
-This represents a device with two clock inputs, named "baud" and "register".
-The baud clock is connected to output 1 of the &osc device, and the register
-clock is connected to output 0 of the &ref.
-
-==Example==
-
-    /* external oscillator */
-    osc: oscillator {
-        compatible = "fixed-clock";
-        #clock-cells = <0>;
-        clock-frequency  = <32678>;
-        clock-output-names = "osc";
-    };
-
-    /* phase-locked-loop device, generates a higher frequency clock
-     * from the external oscillator reference */
-    pll: pll@4c000 {
-        compatible = "vendor,some-pll-interface"
-        #clock-cells = <1>;
-        clocks = <&osc 0>;
-        clock-names = "ref";
-        reg = <0x4c000 0x1000>;
-        clock-output-names = "pll", "pll-switched";
-    };
-
-    /* UART, using the low frequency oscillator for the baud clock,
-     * and the high frequency switched PLL output for register
-     * clocking */
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        interrupts = <33>;
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-    };
-
-This DT fragment defines three devices: an external oscillator to provide a
-low-frequency reference clock, a PLL device to generate a higher frequency
-clock signal, and a UART.
-
-* The oscillator is fixed-frequency, and provides one clock output, named "osc".
-* The PLL is both a clock provider and a clock consumer. It uses the clock
-  signal generated by the external oscillator, and provides two output signals
-  ("pll" and "pll-switched").
-* The UART has its baud clock connected the external oscillator and its
-  register clock connected to the PLL clock (the "pll-switched" signal)
-
-==Assigned clock parents and rates==
-
-Some platforms may require initial configuration of default parent clocks
-and clock frequencies. Such a configuration can be specified in a device tree
-node through assigned-clocks, assigned-clock-parents and assigned-clock-rates
-properties. The assigned-clock-parents property should contain a list of parent
-clocks in the form of a phandle and clock specifier pair and the
-assigned-clock-rates property should contain a list of frequencies in Hz. Both
-these properties should correspond to the clocks listed in the assigned-clocks
-property.
-
-To skip setting parent or rate of a clock its corresponding entry should be
-set to 0, or can be omitted if it is not followed by any non-zero entry.
-
-    uart@a000 {
-        compatible = "fsl,imx-uart";
-        reg = <0xa000 0x1000>;
-        ...
-        clocks = <&osc 0>, <&pll 1>;
-        clock-names = "baud", "register";
-
-        assigned-clocks = <&clkcon 0>, <&pll 2>;
-        assigned-clock-parents = <&pll 2>;
-        assigned-clock-rates = <0>, <460800>;
-    };
-
-In this example the <&pll 2> clock is set as parent of clock <&clkcon 0> and
-the <&pll 2> clock is assigned a frequency value of 460800 Hz.
-
-Configuring a clock's parent and rate through the device node that consumes
-the clock can be done only for clocks that have a single user. Specifying
-conflicting parent or rate configuration in multiple consumer nodes for
-a shared clock is forbidden.
-
-Configuration of common clocks, which affect multiple consumer devices can
-be similarly specified in the clock provider node.
-
-==Protected clocks==
-
-Some platforms or firmwares may not fully expose all the clocks to the OS, such
-as in situations where those clks are used by drivers running in ARM secure
-execution levels. Such a configuration can be specified in device tree with the
-protected-clocks property in the form of a clock specifier list. This property should
-only be specified in the node that is providing the clocks being protected:
-
-   clock-controller@a000f000 {
-        compatible = "vendor,clk95;
-        reg = <0xa000f000 0x1000>
-        #clocks-cells = <1>;
-        ...
-        protected-clocks = <UART3_CLK>, <SPI5_CLK>;
-   };
+This file has moved to the clock binding schema:
+https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/clock/clock.yaml
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
index 97936411b6b4..9fafcb080069 100644
--- a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8064.yaml
@@ -20,12 +20,10 @@ description: |
   See also:
   - dt-bindings/clock/qcom,gcc-msm8960.h
   - dt-bindings/reset/qcom,gcc-msm8960.h
-  - dt-bindings/clock/qcom,gcc-apq8084.h
-  - dt-bindings/reset/qcom,gcc-apq8084.h
 
 properties:
   compatible:
-    const: qcom,gcc-apq8084
+    const: qcom,gcc-apq8064
 
   nvmem-cells:
     minItems: 1
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
new file mode 100644
index 000000000000..397fb918e032
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-apq8084.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-apq8084.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for APQ8084
+
+maintainers:
+  - Stephen Boyd <sboyd@kernel.org>
+  - Taniya Das <quic_tdas@quicinc.com>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on APQ8084.
+
+  See also::
+  - dt-bindings/clock/qcom,gcc-apq8084.h
+  - dt-bindings/reset/qcom,gcc-apq8084.h
+
+allOf:
+  - $ref: qcom,gcc.yaml#
+
+properties:
+  compatible:
+    const: qcom,gcc-apq8084
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    clock-controller@fc400000 {
+        compatible = "qcom,gcc-apq8084";
+        reg = <0xfc400000 0x4000>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+        #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
new file mode 100644
index 000000000000..0bcdc69c6f89
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gcc-sc8280xp.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gcc-sc8280xp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Global Clock & Reset Controller Binding for SC8280xp
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+  Qualcomm global clock control module which supports the clocks, resets and
+  power domains on SC8280xp.
+
+  See also:
+  - include/dt-bindings/clock/qcom,gcc-sc8280xp.h
+
+properties:
+  compatible:
+    const: qcom,gcc-sc8280xp
+
+  clocks:
+    items:
+      - description: XO reference clock
+      - description: Sleep clock
+      - description: UFS memory first RX symbol clock
+      - description: UFS memory second RX symbol clock
+      - description: UFS memory first TX symbol clock
+      - description: UFS card first RX symbol clock
+      - description: UFS card second RX symbol clock
+      - description: UFS card first TX symbol clock
+      - description: Primary USB SuperSpeed pipe clock
+      - description: USB4 PHY pipegmux clock source
+      - description: USB4 PHY DP gmux clock source
+      - description: USB4 PHY sys piegmux clock source
+      - description: USB4 PHY PCIe pipe clock
+      - description: USB4 PHY router max pipe clock
+      - description: Primary USB4 RX0 clock
+      - description: Primary USB4 RX1 clock
+      - description: Secondary USB SuperSpeed pipe clock
+      - description: Second USB4 PHY pipegmux clock source
+      - description: Second USB4 PHY DP gmux clock source
+      - description: Second USB4 PHY sys pipegmux clock source
+      - description: Second USB4 PHY PCIe pipe clock
+      - description: Second USB4 PHY router max pipe clock
+      - description: Secondary USB4 RX0 clock
+      - description: Secondary USB4 RX1 clock
+      - description: Multiport USB first SupserSpeed pipe clock
+      - description: Multiport USB second SuperSpeed pipe clock
+      - description: PCIe 2a pipe clock
+      - description: PCIe 2b pipe clock
+      - description: PCIe 3a pipe clock
+      - description: PCIe 3b pipe clock
+      - description: PCIe 4 pipe clock
+      - description: First EMAC controller reference clock
+      - description: Second EMAC controller reference clock
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+  protected-clocks:
+    maxItems: 389
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    clock-controller@100000 {
+      compatible = "qcom,gcc-sc8280xp";
+      reg = <0x00100000 0x1f0000>;
+      clocks = <&rpmhcc RPMH_CXO_CLK>,
+               <&sleep_clk>,
+               <&ufs_phy_rx_symbol_0_clk>,
+               <&ufs_phy_rx_symbol_1_clk>,
+               <&ufs_phy_tx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_0_clk>,
+               <&ufs_card_rx_symbol_1_clk>,
+               <&ufs_card_tx_symbol_0_clk>,
+               <&usb_0_ssphy>,
+               <&gcc_usb4_phy_pipegmux_clk_src>,
+               <&gcc_usb4_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_phy_sys_pipegmux_clk_src>,
+               <&usb4_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_gcc_usb4_rx0_clk>,
+               <&qusb4phy_gcc_usb4_rx1_clk>,
+               <&usb_1_ssphy>,
+               <&gcc_usb4_1_phy_pipegmux_clk_src>,
+               <&gcc_usb4_1_phy_dp_gmux_clk_src>,
+               <&gcc_usb4_1_phy_sys_pipegmux_clk_src>,
+               <&usb4_1_phy_gcc_usb4_pcie_pipe_clk>,
+               <&usb4_1_phy_gcc_usb4rtr_max_pipe_clk>,
+               <&qusb4phy_1_gcc_usb4_rx0_clk>,
+               <&qusb4phy_1_gcc_usb4_rx1_clk>,
+               <&usb_2_ssphy>,
+               <&usb_3_ssphy>,
+               <&pcie2a_lane>,
+               <&pcie2b_lane>,
+               <&pcie3a_lane>,
+               <&pcie3b_lane>,
+               <&pcie4_lane>,
+               <&rxc0_ref_clk>,
+               <&rxc1_ref_clk>;
+
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+      #power-domain-cells = <1>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
deleted file mode 100644
index da295c3c004b..000000000000
--- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
+++ /dev/null
@@ -1,63 +0,0 @@
-Qualcomm RPM Clock Controller Binding
-------------------------------------------------
-The RPM is a dedicated hardware engine for managing the shared
-SoC resources in order to keep the lowest power profile. It
-communicates with other hardware subsystems via shared memory
-and accepts clock requests, aggregates the requests and turns
-the clocks on/off or scales them on demand.
-
-Required properties :
-- compatible : shall contain only one of the following. The generic
-               compatible "qcom,rpmcc" should be also included.
-
-			"qcom,rpmcc-mdm9607", "qcom,rpmcc"
-			"qcom,rpmcc-msm8660", "qcom,rpmcc"
-			"qcom,rpmcc-apq8060", "qcom,rpmcc"
-			"qcom,rpmcc-msm8226", "qcom,rpmcc"
-			"qcom,rpmcc-msm8916", "qcom,rpmcc"
-			"qcom,rpmcc-msm8936", "qcom,rpmcc"
-			"qcom,rpmcc-msm8953", "qcom,rpmcc"
-			"qcom,rpmcc-msm8974", "qcom,rpmcc"
-			"qcom,rpmcc-msm8976", "qcom,rpmcc"
-			"qcom,rpmcc-apq8064", "qcom,rpmcc"
-			"qcom,rpmcc-ipq806x", "qcom,rpmcc"
-			"qcom,rpmcc-msm8992",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8994",·"qcom,rpmcc"
-			"qcom,rpmcc-msm8996", "qcom,rpmcc"
-			"qcom,rpmcc-msm8998", "qcom,rpmcc"
-			"qcom,rpmcc-qcm2290", "qcom,rpmcc"
-			"qcom,rpmcc-qcs404", "qcom,rpmcc"
-			"qcom,rpmcc-sdm660", "qcom,rpmcc"
-			"qcom,rpmcc-sm6115", "qcom,rpmcc"
-			"qcom,rpmcc-sm6125", "qcom,rpmcc"
-
-- #clock-cells : shall contain 1
-
-The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h>
-and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock
-is an "active" clock, which means that the consumer only care that the
-clock is available when the apps CPU subsystem is active, i.e. not
-suspended or in deep idle. If it is important that the clock keeps running
-during system suspend, you need to specify the non-active clock, the one
-not containing *_A_* in the enumerator name.
-
-Example:
-	smd {
-		compatible = "qcom,smd";
-
-		rpm {
-			interrupts = <0 168 1>;
-			qcom,ipc = <&apcs 8 0>;
-			qcom,smd-edge = <15>;
-
-			rpm_requests {
-				compatible = "qcom,rpm-msm8916";
-				qcom,smd-channels = "rpm_requests";
-
-				rpmcc: clock-controller {
-					compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
-					#clock-cells = <1>;
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
new file mode 100644
index 000000000000..9d296b89a8d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,rpmcc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM Clock Controller
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description: |
+  The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> and
+  come in pairs:: FOO_CLK followed by FOO_A_CLK. The latter clock is
+  an "active" clock, which means that the consumer only care that the clock is
+  available when the apps CPU subsystem is active, i.e. not suspended or in
+  deep idle. If it is important that the clock keeps running during system
+  suspend, you need to specify the non-active clock, the one not containing
+  *_A_* in the enumerator name.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - qcom,rpmcc-apq8060
+          - qcom,rpmcc-apq8064
+          - qcom,rpmcc-ipq806x
+          - qcom,rpmcc-mdm9607
+          - qcom,rpmcc-msm8226
+          - qcom,rpmcc-msm8660
+          - qcom,rpmcc-msm8916
+          - qcom,rpmcc-msm8936
+          - qcom,rpmcc-msm8953
+          - qcom,rpmcc-msm8974
+          - qcom,rpmcc-msm8976
+          - qcom,rpmcc-msm8992
+          - qcom,rpmcc-msm8994
+          - qcom,rpmcc-msm8996
+          - qcom,rpmcc-msm8998
+          - qcom,rpmcc-qcm2290
+          - qcom,rpmcc-qcs404
+          - qcom,rpmcc-sdm660
+          - qcom,rpmcc-sm6115
+          - qcom,rpmcc-sm6125
+      - const: qcom,rpmcc
+
+  '#clock-cells':
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xo
+
+required:
+  - compatible
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    rpm {
+        rpm-requests {
+            compatible = "qcom,rpm-msm8916";
+            qcom,smd-channels = "rpm_requests";
+
+            clock-controller {
+                compatible = "qcom,rpmcc-msm8916", "qcom,rpmcc";
+                #clock-cells = <1>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index e0b86214f0f5..e57bc40d307a 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -49,6 +49,7 @@ properties:
       - renesas,r8a77995-cpg-mssr # R-Car D3
       - renesas,r8a779a0-cpg-mssr # R-Car V3U
       - renesas,r8a779f0-cpg-mssr # R-Car S4-8
+      - renesas,r8a779g0-cpg-mssr # R-Car V4H
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
index bd3af8fc616b..8880b834f264 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,rzg2l-cpg.yaml
@@ -4,14 +4,15 @@
 $id: "http://devicetree.org/schemas/clock/renesas,rzg2l-cpg.yaml#"
 $schema: "http://devicetree.org/meta-schemas/core.yaml#"
 
-title: Renesas RZ/{G2L,V2L} Clock Pulse Generator / Module Standby Mode
+title: Renesas RZ/{G2L,V2L,V2M} Clock Pulse Generator / Module Standby Mode
 
 maintainers:
   - Geert Uytterhoeven <geert+renesas@glider.be>
 
 description: |
-  On Renesas RZ/{G2L,V2L} SoC, the CPG (Clock Pulse Generator) and Module
-  Standby Mode share the same register block.
+  On Renesas RZ/{G2L,V2L}-alike SoC's, the CPG (Clock Pulse Generator) and Module
+  Standby Mode share the same register block. On RZ/V2M, the functionality is
+  similar, but does not have Clock Monitor Registers.
 
   They provide the following functionalities:
     - The CPG block generates various core clocks,
@@ -23,8 +24,10 @@ description: |
 properties:
   compatible:
     enum:
-      - renesas,r9a07g044-cpg  # RZ/G2{L,LC}
-      - renesas,r9a07g054-cpg  # RZ/V2L
+      - renesas,r9a07g043-cpg # RZ/G2UL{Type-1,Type-2}
+      - renesas,r9a07g044-cpg # RZ/G2{L,LC}
+      - renesas,r9a07g054-cpg # RZ/V2L
+      - renesas,r9a09g011-cpg # RZ/V2M
 
   reg:
     maxItems: 1
@@ -42,9 +45,10 @@ properties:
     description: |
       - For CPG core clocks, the two clock specifier cells must be "CPG_CORE"
         and a core clock reference, as defined in
-        <dt-bindings/clock/r9a07g*-cpg.h>
+        <dt-bindings/clock/r9a0*-cpg.h>
       - For module clocks, the two clock specifier cells must be "CPG_MOD" and
-        a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h>.
+        a module number, as defined in the <dt-bindings/clock/r9a07g0*-cpg.h> or
+        <dt-bindings/clock/r9a09g011-cpg.h>.
     const: 2
 
   '#power-domain-cells':
@@ -58,7 +62,7 @@ properties:
   '#reset-cells':
     description:
       The single reset specifier cell must be the module number, as defined in
-      the <dt-bindings/clock/r9a07g0*-cpg.h>.
+      the <dt-bindings/clock/r9a07g0*-cpg.h> or <dt-bindings/clock/r9a09g011-cpg.h>.
     const: 1
 
 required:
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
deleted file mode 100644
index 55e78cddec8c..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-* Rockchip PX30 Clock and Reset Unit
-
-The PX30 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: PMU for CRU should be "rockchip,px30-pmu-cru"
-- compatible: CRU should be "rockchip,px30-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed
-          in clock-names
-- clock-names: Should contain the following:
-  - "xin24m" for both PMUCRU and CRU
-  - "gpll" for CRU (sourced from PMUCRU)
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "i2sx_clkin" - external I2S clock - optional,
- - "gmac_clkin" - external GMAC clock - optional
-
-Example: Clock controller node:
-
-	pmucru: clock-controller@ff2bc000 {
-		compatible = "rockchip,px30-pmucru";
-		reg = <0x0 0xff2bc000 0x0 0x1000>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-	cru: clock-controller@ff2b0000 {
-		compatible = "rockchip,px30-cru";
-		reg = <0x0 0xff2b0000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff030000 {
-		compatible = "rockchip,px30-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff030000 0x0 0x100>;
-		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&pmucru SCLK_UART0_PMU>, <&pmucru PCLK_UART0_PMU>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
new file mode 100644
index 000000000000..3eec381c7cf5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,px30-cru.yaml
@@ -0,0 +1,119 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,px30-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip PX30 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The PX30 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/px30-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "xin32k"     - rtc clock           - optional
+    - "i2sx_clkin" - external I2S clock  - optional
+    - "gmac_clkin" - external GMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,px30-cru
+      - rockchip,px30-pmucru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    minItems: 1
+    items:
+      - description: Clock for both PMUCRU and CRU
+      - description: Clock for CRU (sourced from PMUCRU)
+
+  clock-names:
+    minItems: 1
+    items:
+      - const: xin24m
+      - const: gpll
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#clock-cells"
+  - "#reset-cells"
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,px30-cru
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          minItems: 2
+
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/px30-cru.h>
+
+    pmucru: clock-controller@ff2bc000 {
+      compatible = "rockchip,px30-pmucru";
+      reg = <0xff2bc000 0x1000>;
+      clocks = <&xin24m>;
+      clock-names = "xin24m";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
+
+    cru: clock-controller@ff2b0000 {
+      compatible = "rockchip,px30-cru";
+      reg = <0xff2b0000 0x1000>;
+      clocks = <&xin24m>, <&pmucru PLL_GPLL>;
+      clock-names = "xin24m", "gpll";
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
deleted file mode 100644
index 20df350b9ef3..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-* Rockchip RK3036 Clock and Reset Unit
-
-The RK3036 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3036-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "rmii_clkin" - external EMAC clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3036-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@20060000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x20060000 0x100>;
-		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
new file mode 100644
index 000000000000..1376230fede6
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3036-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3036 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3036 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3036-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input       - required
+    - "ext_i2s"    - external I2S clock  - optional
+    - "rmii_clkin" - external EMAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3036-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3036-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
deleted file mode 100644
index 7f368530a2e4..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3188/RK3066 Clock and Reset Unit
-
-The RK3188/RK3066 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3188-cru", "rockchip,rk3188a-cru" or
-			"rockchip,rk3066a-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
-dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
-Similar macros exist for the reset sources in these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "xin27m" - 27mhz crystal input on rk3066 - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_cif0" - external camera clock - optional,
- - "ext_rmii" - external RMII clock - optional,
- - "ext_jtag" - externalJTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
new file mode 100644
index 000000000000..ddd7e46af0f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3188-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3188-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3188/RK3066 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3188/RK3066 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3188-cru.h and
+  dt-bindings/clock/rk3066-cru.h headers and can be used in device tree sources.
+  Similar macros exist for the reset sources in these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"    - crystal input                 - required
+    - "xin32k"    - RTC clock                     - optional
+    - "xin27m"    - 27mhz crystal input on RK3066 - optional
+    - "ext_hsadc" - external HSADC clock          - optional
+    - "ext_cif0"  - external camera clock         - optional
+    - "ext_rmii"  - external RMII clock           - optional
+    - "ext_jtag"  - external JTAG clock           - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3066a-cru
+      - rockchip,rk3188-cru
+      - rockchip,rk3188a-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3188-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
deleted file mode 100644
index f323048127eb..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* Rockchip RK3228 Clock and Reset Unit
-
-The RK3228 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3228-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional
- - "phy_50m_out" - output clock of the pll in the mac phy
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3228-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10110000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10110000 0x100>;
-		interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
new file mode 100644
index 000000000000..cf7dc01d9478
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3228-cru.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3228-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3228 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3228 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3228-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input                          - required
+    - "ext_i2s"     - external I2S clock                     - optional
+    - "ext_gmac"    - external GMAC clock                    - optional
+    - "ext_hsadc"   - external HSADC clock                   - optional
+    - "phy_50m_out" - output clock of the pll in the mac phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3228-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20000000 {
+      compatible = "rockchip,rk3228-cru";
+      reg = <0x20000000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
deleted file mode 100644
index bf3a9ec19241..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.txt
+++ /dev/null
@@ -1,67 +0,0 @@
-* Rockchip RK3288 Clock and Reset Unit
-
-The RK3288 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-A revision of this SoC is available: rk3288w. The clock tree is a bit
-different so another dt-compatible is available. Noticed that it is only
-setting the difference but there is no automatic revision detection. This
-should be performed by bootloaders.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3288-cru" or "rockchip,rk3288w-cru" in
-  case of this revision of Rockchip rk3288.
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_edp_24m" - external display port clock - optional,
- - "ext_vip" - external VIP clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
-
-Example: Clock controller node:
-
-	cru: cru@20000000 {
-		compatible = "rockchip,rk3188-cru";
-		reg = <0x20000000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
new file mode 100644
index 000000000000..96bc05749e1a
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3288-cru.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3288-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3288 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3288 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+
+  A revision of this SoC is available: rk3288w. The clock tree is a bit
+  different so another dt-compatible is available. Noticed that it is only
+  setting the difference but there is no automatic revision detection. This
+  should be performed by boot loaders.
+
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3288-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"      - crystal input               - required,
+    - "xin32k"      - rtc clock                   - optional,
+    - "ext_i2s"     - external I2S clock          - optional,
+    - "ext_hsadc"   - external HSADC clock        - optional,
+    - "ext_edp_24m" - external display port clock - optional,
+    - "ext_vip"     - external VIP clock          - optional,
+    - "ext_isp"     - external ISP clock          - optional,
+    - "ext_jtag"    - external JTAG clock         - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3288-cru
+      - rockchip,rk3288w-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3288-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
deleted file mode 100644
index 9b151c5b0c90..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-* Rockchip RK3308 Clock and Reset Unit
-
-The RK3308 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: CRU should be "rockchip,rk3308-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in", "mclk_i2s2_8ch_in",
-   "mclk_i2s3_8ch_in", "mclk_i2s0_2ch_in",
-   "mclk_i2s1_2ch_in" - external I2S or SPDIF clock - optional,
- - "mac_clkin" - external MAC clock - optional
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff500000 {
-		compatible = "rockchip,rk3308-cru";
-		reg = <0x0 0xff500000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@ff0a0000 {
-		compatible = "rockchip,rk3308-uart", "snps,dw-apb-uart";
-		reg = <0x0 0xff0a0000 0x0 0x100>;
-		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
-		clock-names = "baudclk", "apb_pclk";
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		status = "disabled";
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
new file mode 100644
index 000000000000..523ee578a586
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3308-cru.yaml
@@ -0,0 +1,76 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3308-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3308 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3308 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3308-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"                               - crystal input      - required
+    - "xin32k"                               - rtc clock          - optional
+    - "mclk_i2s0_8ch_in", "mclk_i2s1_8ch_in",
+      "mclk_i2s2_8ch_in", "mclk_i2s3_8ch_in",
+      "mclk_i2s0_2ch_in", "mclk_i2s1_2ch_in" - external I2S or
+                                               SPDIF clock        - optional
+    - "mac_clkin"                            - external MAC clock - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3308-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff500000 {
+      compatible = "rockchip,rk3308-cru";
+      reg = <0xff500000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
deleted file mode 100644
index 7c8bbcfed8d2..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip RK3368 Clock and Reset Unit
-
-The RK3368 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rk3368-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing, pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "xin32k" - rtc clock - optional,
- - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
- - "ext_hsadc" - external HSADC clock - optional,
- - "ext_isp" - external ISP clock - optional,
- - "ext_jtag" - external JTAG clock - optional
- - "ext_vip" - external VIP clock - optional,
- - "usbotg_out" - output clock of the pll in the otg phy
-
-Example: Clock controller node:
-
-	cru: clock-controller@ff760000 {
-		compatible = "rockchip,rk3368-cru";
-		reg = <0x0 0xff760000 0x0 0x1000>;
-		rockchip,grf = <&grf>;
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10124000 {
-		compatible = "snps,dw-apb-uart";
-		reg = <0x10124000 0x400>;
-		interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <1>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
new file mode 100644
index 000000000000..adb67877720d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3368-cru.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rk3368-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3368 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RK3368 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rk3368-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"     - crystal input                          - required
+    - "xin32k"     - rtc clock                              - optional
+    - "ext_i2s"    - external I2S clock                     - optional
+    - "ext_gmac"   - external GMAC clock                    - optional
+    - "ext_hsadc"  - external HSADC clock                   - optional
+    - "ext_isp"    - external ISP clock                     - optional
+    - "ext_jtag"   - external JTAG clock                    - optional
+    - "ext_vip"    - external VIP clock                     - optional
+    - "usbotg_out" - output clock of the pll in the otg phy
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk3368-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@ff760000 {
+      compatible = "rockchip,rk3368-cru";
+      reg = <0xff760000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
index 72b286a1beba..54da1e31ea73 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.yaml
@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Rockchip RK3399 Clock and Reset Unit
 
 maintainers:
-  - Xing Zheng <zhengxing@rock-chips.com>
+  - Elaine Zhang <zhangqing@rock-chips.com>
   - Heiko Stuebner <heiko@sntech.de>
 
 description: |
@@ -22,11 +22,11 @@ description: |
   There are several clocks that are generated outside the SoC. It is expected
   that they are defined using standard clock bindings with following
   clock-output-names:
-    - "xin24m" - crystal input - required,
-    - "xin32k" - rtc clock - optional,
-    - "clkin_gmac" - external GMAC clock - optional,
-    - "clkin_i2s" - external I2S clock - optional,
-    - "pclkin_cif" - external ISP clock - optional,
+    - "xin24m"           - crystal input                          - required,
+    - "xin32k"           - rtc clock                              - optional,
+    - "clkin_gmac"       - external GMAC clock                    - optional,
+    - "clkin_i2s"        - external I2S clock                     - optional,
+    - "pclkin_cif"       - external ISP clock                     - optional,
     - "clk_usbphy0_480m" - output clock of the pll in the usbphy0
     - "clk_usbphy1_480m" - output clock of the pll in the usbphy1
 
@@ -46,24 +46,15 @@ properties:
     const: 1
 
   clocks:
-    minItems: 1
-
-  assigned-clocks:
-    minItems: 1
-    maxItems: 64
-
-  assigned-clock-parents:
-    minItems: 1
-    maxItems: 64
+    maxItems: 1
 
-  assigned-clock-rates:
-    minItems: 1
-    maxItems: 64
+  clock-names:
+    const: xin24m
 
   rockchip,grf:
     $ref: /schemas/types.yaml#/definitions/phandle
-    description: >
-      phandle to the syscon managing the "general register files". It is used
+    description:
+      Phandle to the syscon managing the "general register files". It is used
       for GRF muxes, if missing any muxes present in the GRF will not be
       available.
 
@@ -77,7 +68,7 @@ additionalProperties: false
 
 examples:
   - |
-    pmucru: pmu-clock-controller@ff750000 {
+    pmucru: clock-controller@ff750000 {
       compatible = "rockchip,rk3399-pmucru";
       reg = <0xff750000 0x1000>;
       #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
index b2c26097827f..fc7546f521c5 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.yaml
@@ -34,6 +34,19 @@ properties:
   "#reset-cells":
     const: 1
 
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
deleted file mode 100644
index 161326a4f9c1..000000000000
--- a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-* Rockchip RV1108 Clock and Reset Unit
-
-The RV1108 clock controller generates and supplies clock to various
-controllers within the SoC and also implements a reset controller for SoC
-peripherals.
-
-Required Properties:
-
-- compatible: should be "rockchip,rv1108-cru"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- #clock-cells: should be 1.
-- #reset-cells: should be 1.
-
-Optional Properties:
-
-- rockchip,grf: phandle to the syscon managing the "general register files"
-  If missing pll rates are not changeable, due to the missing pll lock status.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
-used in device tree sources. Similar macros exist for the reset sources in
-these files.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xin24m" - crystal input - required,
- - "ext_vip" - external VIP clock - optional
- - "ext_i2s" - external I2S clock - optional
- - "ext_gmac" - external GMAC clock - optional
- - "hdmiphy" - external clock input derived from HDMI PHY - optional
- - "usbphy" - external clock input derived from USB PHY - optional
-
-Example: Clock controller node:
-
-	cru: cru@20200000 {
-		compatible = "rockchip,rv1108-cru";
-		reg = <0x20200000 0x1000>;
-		rockchip,grf = <&grf>;
-
-		#clock-cells = <1>;
-		#reset-cells = <1>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller:
-
-	uart0: serial@10230000 {
-		compatible = "rockchip,rv1108-uart", "snps,dw-apb-uart";
-		reg = <0x10230000 0x100>;
-		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
-		reg-shift = <2>;
-		reg-io-width = <4>;
-		clocks = <&cru SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
new file mode 100644
index 000000000000..20421c22f184
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/rockchip,rv1108-cru.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/rockchip,rv1108-cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RV1108 Clock and Reset Unit (CRU)
+
+maintainers:
+  - Elaine Zhang <zhangqing@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |
+  The RV1108 clock controller generates and supplies clocks to various
+  controllers within the SoC and also implements a reset controller for SoC
+  peripherals.
+  Each clock is assigned an identifier and client nodes can use this identifier
+  to specify the clock which they consume. All available clocks are defined as
+  preprocessor macros in the dt-bindings/clock/rv1108-cru.h headers and can be
+  used in device tree sources. Similar macros exist for the reset sources in
+  these files.
+  There are several clocks that are generated outside the SoC. It is expected
+  that they are defined using standard clock bindings with following
+  clock-output-names:
+    - "xin24m"   - crystal input                              - required
+    - "ext_vip"  - external VIP clock                         - optional
+    - "ext_i2s"  - external I2S clock                         - optional
+    - "ext_gmac" - external GMAC clock                        - optional
+    - "hdmiphy"  - external clock input derived from HDMI PHY - optional
+    - "usbphy"   - external clock input derived from USB PHY  - optional
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rv1108-cru
+
+  reg:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    const: xin24m
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the syscon managing the "general register files" (GRF),
+      if missing pll rates are not changeable, due to the missing pll
+      lock status.
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+  - "#reset-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cru: clock-controller@20200000 {
+      compatible = "rockchip,rv1108-cru";
+      reg = <0x20200000 0x1000>;
+      rockchip,grf = <&grf>;
+      #clock-cells = <1>;
+      #reset-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
index 45b94124366c..f8c474227807 100644
--- a/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
+++ b/Documentation/devicetree/bindings/clock/st,stm32mp1-rcc.yaml
@@ -41,6 +41,7 @@ description: |
 
   The list of valid indices for STM32MP1 is available in:
   include/dt-bindings/reset-controller/stm32mp1-resets.h
+  include/dt-bindings/reset-controller/stm32mp13-resets.h
 
   This file implements defines like:
   #define LTDC_R	3072
@@ -57,6 +58,7 @@ properties:
       - enum:
           - st,stm32mp1-rcc-secure
           - st,stm32mp1-rcc
+          - st,stm32mp13-rcc
       - const: syscon
   clocks: true
   clock-names: true
diff --git a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
index 9bc95a308477..2150307219a0 100644
--- a/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
+++ b/Documentation/devicetree/bindings/clock/stericsson,u8500-clks.yaml
@@ -109,6 +109,25 @@ properties:
 
     additionalProperties: false
 
+  clkout-clock:
+    description: A subnode with three clock cells for externally routed clocks,
+      output clocks. These are two PRCMU-internal clocks that can be divided and
+      muxed out on the pads of the DB8500 SoC.
+    type: object
+
+    properties:
+      '#clock-cells':
+        description:
+          The first cell indicates which output clock we are using,
+          possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
+          The second cell indicates which clock we want to use as source,
+          possible values are 0 thru 7, see the defines for the different
+          source clocks.
+          The third cell is a divider, legal values are 1 thru 63.
+        const: 3
+
+    additionalProperties: false
+
 required:
   - compatible
   - reg
@@ -119,3 +138,41 @@ required:
   - smp-twd-clock
 
 additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/ste-db8500-clkout.h>
+    clocks@8012 {
+      compatible = "stericsson,u8500-clks";
+      reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
+            <0x8000f000 0x1000>, <0xa03ff000 0x1000>,
+            <0xa03cf000 0x1000>;
+
+      prcmu_clk: prcmu-clock {
+        #clock-cells = <1>;
+      };
+
+      prcc_pclk: prcc-periph-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_kclk: prcc-kernel-clock {
+        #clock-cells = <2>;
+      };
+
+      prcc_reset: prcc-reset-controller {
+        #reset-cells = <2>;
+      };
+
+      rtc_clk: rtc32k-clock {
+        #clock-cells = <0>;
+      };
+
+      smp_twd_clk: smp-twd-clock {
+        #clock-cells = <0>;
+      };
+
+      clkout_clk: clkout-clock {
+        #clock-cells = <3>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
index 9b537bc876b5..66765116aff5 100644
--- a/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
+++ b/Documentation/devicetree/bindings/clock/ti,am654-ehrpwm-tbclk.yaml
@@ -15,6 +15,7 @@ properties:
       - enum:
           - ti,am654-ehrpwm-tbclk
           - ti,am64-epwm-tbclk
+          - ti,am62-epwm-tbclk
       - const: syscon
 
   "#clock-cells":
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
index 2a4b6c06e7c9..f0f1bf06aea6 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml
@@ -47,6 +47,10 @@ properties:
       - qcom,rpm-qcm2290
       - qcom,rpm-qcs404
 
+  clock-controller:
+    $ref: /schemas/clock/qcom,rpmcc.yaml#
+    unevaluatedProperties: false
+
   qcom,smd-channels:
     $ref: /schemas/types.yaml#/definitions/string-array
     description: Channel name used for the RPM communication