Merge tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for ACPI

 - Various cleanups to the ISA string parsing, including making them
   case-insensitive

 - Support for the vector extension

 - Support for independent irq/softirq stacks

 - Our CPU DT binding now has "unevaluatedProperties: false"

* tag 'riscv-for-linus-6.5-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (78 commits)
  riscv: hibernate: remove WARN_ON in save_processor_state
  dt-bindings: riscv: cpus: switch to unevaluatedProperties: false
  dt-bindings: riscv: cpus: add a ref the common cpu schema
  riscv: stack: Add config of thread stack size
  riscv: stack: Support HAVE_SOFTIRQ_ON_OWN_STACK
  riscv: stack: Support HAVE_IRQ_EXIT_ON_IRQ_STACK
  RISC-V: always report presence of extensions formerly part of the base ISA
  dt-bindings: riscv: explicitly mention assumption of Zicntr & Zihpm support
  RISC-V: remove decrement/increment dance in ISA string parser
  RISC-V: rework comments in ISA string parser
  RISC-V: validate riscv,isa at boot, not during ISA string parsing
  RISC-V: split early & late of_node to hartid mapping
  RISC-V: simplify register width check in ISA string parsing
  perf: RISC-V: Limit the number of counters returned from SBI
  riscv: replace deprecated scall with ecall
  riscv: uprobes: Restore thread.bad_cause
  riscv: mm: try VMA lock-based page fault handling first
  riscv: mm: Pre-allocate PGD entries for vmalloc/modules area
  RISC-V: hwprobe: Expose Zba, Zbb, and Zbs
  RISC-V: Track ISA extensions per hart
  ...

3 files changed, 146 insertions, 0 deletions

diff --git a/Documentation/riscv/hwprobe.rst b/Documentation/riscv/hwprobe.rst
index 9f0dd62dcb5d..19165ebd82ba 100644
--- a/Documentation/riscv/hwprobe.rst
+++ b/Documentation/riscv/hwprobe.rst
@@ -64,6 +64,19 @@ The following keys are defined:
   * :c:macro:`RISCV_HWPROBE_IMA_C`: The C extension is supported, as defined
     by version 2.2 of the RISC-V ISA manual.
 
+  * :c:macro:`RISCV_HWPROBE_IMA_V`: The V extension is supported, as defined by
+    version 1.0 of the RISC-V Vector extension manual.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBA`: The Zba address generation extension is
+       supported, as defined in version 1.0 of the Bit-Manipulation ISA
+       extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBB`: The Zbb extension is supported, as defined
+       in version 1.0 of the Bit-Manipulation ISA extensions.
+
+  * :c:macro:`RISCV_HWPROBE_EXT_ZBS`: The Zbs extension is supported, as defined
+       in version 1.0 of the Bit-Manipulation ISA extensions.
+
 * :c:macro:`RISCV_HWPROBE_KEY_CPUPERF_0`: A bitmask that contains performance
   information about the selected set of processors.
 
diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst
index 175a91db0200..95cf9c1e1da1 100644
--- a/Documentation/riscv/index.rst
+++ b/Documentation/riscv/index.rst
@@ -10,6 +10,7 @@ RISC-V architecture
     hwprobe
     patch-acceptance
     uabi
+    vector
 
     features
 
diff --git a/Documentation/riscv/vector.rst b/Documentation/riscv/vector.rst
new file mode 100644
index 000000000000..48f189d79e41
--- /dev/null
+++ b/Documentation/riscv/vector.rst
@@ -0,0 +1,132 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================================
+Vector Extension Support for RISC-V Linux
+=========================================
+
+This document briefly outlines the interface provided to userspace by Linux in
+order to support the use of the RISC-V Vector Extension.
+
+1.  prctl() Interface
+---------------------
+
+Two new prctl() calls are added to allow programs to manage the enablement
+status for the use of Vector in userspace. The intended usage guideline for
+these interfaces is to give init systems a way to modify the availability of V
+for processes running under its domain. Calling thess interfaces is not
+recommended in libraries routines because libraries should not override policies
+configured from the parant process. Also, users must noted that these interfaces
+are not portable to non-Linux, nor non-RISC-V environments, so it is discourage
+to use in a portable code. To get the availability of V in an ELF program,
+please read :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the
+auxiliary vector.
+
+* prctl(PR_RISCV_V_SET_CONTROL, unsigned long arg)
+
+    Sets the Vector enablement status of the calling thread, where the control
+    argument consists of two 2-bit enablement statuses and a bit for inheritance
+    mode. Other threads of the calling process are unaffected.
+
+    Enablement status is a tri-state value each occupying 2-bit of space in
+    the control argument:
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_DEFAULT`: Use the system-wide default
+      enablement status on execve(). The system-wide default setting can be
+      controlled via sysctl interface (see sysctl section below).
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_ON`: Allow Vector to be run for the
+      thread.
+
+    * :c:macro:`PR_RISCV_V_VSTATE_CTRL_OFF`: Disallow Vector. Executing Vector
+      instructions under such condition will trap and casuse the termination of the thread.
+
+    arg: The control argument is a 5-bit value consisting of 3 parts, and
+    accessed by 3 masks respectively.
+
+    The 3 masks, PR_RISCV_V_VSTATE_CTRL_CUR_MASK,
+    PR_RISCV_V_VSTATE_CTRL_NEXT_MASK, and PR_RISCV_V_VSTATE_CTRL_INHERIT
+    represents bit[1:0], bit[3:2], and bit[4]. bit[1:0] accounts for the
+    enablement status of current thread, and the setting at bit[3:2] takes place
+    at next execve(). bit[4] defines the inheritance mode of the setting in
+    bit[3:2].
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_CUR_MASK`: bit[1:0]: Account for the
+          Vector enablement status for the calling thread. The calling thread is
+          not able to turn off Vector once it has been enabled. The prctl() call
+          fails with EPERM if the value in this mask is PR_RISCV_V_VSTATE_CTRL_OFF
+          but the current enablement status is not off. Setting
+          PR_RISCV_V_VSTATE_CTRL_DEFAULT here takes no effect but to set back
+          the original enablement status.
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_NEXT_MASK`: bit[3:2]: Account for the
+          Vector enablement setting for the calling thread at the next execve()
+          system call. If PR_RISCV_V_VSTATE_CTRL_DEFAULT is used in this mask,
+          then the enablement status will be decided by the system-wide
+          enablement status when execve() happen.
+
+        * :c:macro:`PR_RISCV_V_VSTATE_CTRL_INHERIT`: bit[4]: the inheritance
+          mode for the setting at PR_RISCV_V_VSTATE_CTRL_NEXT_MASK. If the bit
+          is set then the following execve() will not clear the setting in both
+          PR_RISCV_V_VSTATE_CTRL_NEXT_MASK and PR_RISCV_V_VSTATE_CTRL_INHERIT.
+          This setting persists across changes in the system-wide default value.
+
+    Return value:
+        * 0 on success;
+        * EINVAL: Vector not supported, invalid enablement status for current or
+          next mask;
+        * EPERM: Turning off Vector in PR_RISCV_V_VSTATE_CTRL_CUR_MASK if Vector
+          was enabled for the calling thread.
+
+    On success:
+        * A valid setting for PR_RISCV_V_VSTATE_CTRL_CUR_MASK takes place
+          immediately. The enablement status specified in
+          PR_RISCV_V_VSTATE_CTRL_NEXT_MASK happens at the next execve() call, or
+          all following execve() calls if PR_RISCV_V_VSTATE_CTRL_INHERIT bit is
+          set.
+        * Every successful call overwrites a previous setting for the calling
+          thread.
+
+* prctl(PR_RISCV_V_GET_CONTROL)
+
+    Gets the same Vector enablement status for the calling thread. Setting for
+    next execve() call and the inheritance bit are all OR-ed together.
+
+    Note that ELF programs are able to get the availability of V for itself by
+    reading :c:macro:`COMPAT_HWCAP_ISA_V` bit of :c:macro:`ELF_HWCAP` in the
+    auxiliary vector.
+
+    Return value:
+        * a nonnegative value on success;
+        * EINVAL: Vector not supported.
+
+2.  System runtime configuration (sysctl)
+-----------------------------------------
+
+To mitigate the ABI impact of expansion of the signal stack, a
+policy mechanism is provided to the administrators, distro maintainers, and
+developers to control the default Vector enablement status for userspace
+processes in form of sysctl knob:
+
+* /proc/sys/abi/riscv_v_default_allow
+
+    Writing the text representation of 0 or 1 to this file sets the default
+    system enablement status for new starting userspace programs. Valid values
+    are:
+
+    * 0: Do not allow Vector code to be executed as the default for new processes.
+    * 1: Allow Vector code to be executed as the default for new processes.
+
+    Reading this file returns the current system default enablement status.
+
+    At every execve() call, a new enablement status of the new process is set to
+    the system default, unless:
+
+      * PR_RISCV_V_VSTATE_CTRL_INHERIT is set for the calling process, and the
+        setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not
+        PR_RISCV_V_VSTATE_CTRL_DEFAULT. Or,
+
+      * The setting in PR_RISCV_V_VSTATE_CTRL_NEXT_MASK is not
+        PR_RISCV_V_VSTATE_CTRL_DEFAULT.
+
+    Modifying the system default enablement status does not affect the enablement
+    status of any existing process of thread that do not make an execve() call.