Merge tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
 "New Functionality:
   - Add lots of Device Tree bindings / support
   - Turn off LED strings when display is blank
   - Switch I2C drivers from .probe_new() to .probe()
   - Remove superfluous NULL checks
   - Only obtain PWM information once and do it in .probe()

  Fix-ups:
   - Ensure locks are obtained and held when required"

* tag 'backlight-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: led_bl: Take led_access lock when required
  video: backlight: lp855x: Get PWM for PWM mode during probe
  dt-bindings: backlight: lp855x: Convert to YAML and modernize
  dt-bindings: backlight: pwm: Make power-supply not required
  backlight: pwm_bl: Remove unneeded checks for valid GPIOs
  backlight: Switch i2c drivers back to use .probe()
  backlight: lm3630a: Turn off both led strings when display is blank
  dt-bindings: leds: backlight: ktz8866: Add reg property and update example

4 files changed, 168 insertions, 83 deletions

diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
index 11b6fc36183d..c914e1276982 100644
--- a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktz8866.yaml
@@ -21,6 +21,9 @@ properties:
   compatible:
     const: kinetic,ktz8866
 
+  reg:
+    maxItems: 1
+
   vddpos-supply:
     description: positive boost supply regulator.
 
@@ -54,6 +57,7 @@ properties:
 
 required:
   - compatible
+  - reg
   - vddpos-supply
   - vddneg-supply
   - enable-gpios
@@ -64,14 +68,19 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    backlight {
-        compatible = "kinetic,ktz8866";
-
-        vddpos-supply = <&bl_vddpos_5p5>;
-        vddneg-supply = <&bl_vddneg_5p5>;
-        enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
-        current-num-sinks = <5>;
-        kinetic,current-ramp-delay-ms = <128>;
-        kinetic,led-enable-ramp-delay-ms = <1>;
-        kinetic,enable-lcd-bias;
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@11 {
+            compatible = "kinetic,ktz8866";
+            reg = <0x11>;
+            vddpos-supply = <&bl_vddpos_5p5>;
+            vddneg-supply = <&bl_vddneg_5p5>;
+            enable-gpios = <&tlmm 139 GPIO_ACTIVE_HIGH>;
+            current-num-sinks = <5>;
+            kinetic,current-ramp-delay-ms = <128>;
+            kinetic,led-enable-ramp-delay-ms = <1>;
+            kinetic,enable-lcd-bias;
+        };
     };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
new file mode 100644
index 000000000000..9416e1bfab92
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x-backlight.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lp855x-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments LP855X backlight controllers
+
+maintainers:
+  - Artur Weber <aweber.kernel@gmail.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8550
+      - ti,lp8551
+      - ti,lp8552
+      - ti,lp8553
+      - ti,lp8555
+      - ti,lp8556
+      - ti,lp8557
+
+  reg:
+    maxItems: 1
+
+  dev-ctrl:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description:
+      Value of device control register. This is a device-specific value.
+
+  bl-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description: Backlight device name.
+
+  init-brt:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: Initial value of backlight brightness.
+
+  power-supply:
+    description: Regulator which controls the 3V rail.
+
+  enable-supply:
+    description: Regulator which controls the EN/VDDIO input.
+
+  pwms:
+    maxItems: 1
+    description: |
+      PWM channel to use for controlling the backlight; setting this
+      enables the PWM-based backlight control mode.
+
+  pwm-names: true
+
+  pwm-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      PWM period value. Deprecated; set the period value in the pwms
+      property instead.
+    deprecated: true
+
+patternProperties:
+  "^rom-[0-9a-f]{2}h$":
+    type: object
+    description: Nodes containing the values of configuration registers.
+    additionalProperties: false
+    properties:
+      rom-addr:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Register address of ROM area to be updated.
+
+      rom-val:
+        $ref: /schemas/types.yaml#/definitions/uint8
+        description: Value to write to the ROM register.
+
+required:
+  - compatible
+  - reg
+  - dev-ctrl
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8555";
+            reg = <0x2c>;
+
+            dev-ctrl = /bits/ 8 <0x00>;
+
+            pwms = <&pwm 0 10000>;
+            pwm-names = "lp8555";
+
+            /* 4V OV, 4 output LED0 string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+
+            /* Heavy smoothing, 24ms ramp time step */
+            rom-15h {
+              rom-addr = /bits/ 8 <0x15>;
+              rom-val = /bits/ 8 <0xc7>;
+            };
+
+            /* 4 output LED1 string enabled */
+            rom-19h {
+              rom-addr = /bits/ 8 <0x19>;
+              rom-val = /bits/ 8 <0x0f>;
+            };
+        };
+    };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8556";
+            reg = <0x2c>;
+
+            bl-name = "lcd-bl";
+            dev-ctrl = /bits/ 8 <0x85>;
+            init-brt = /bits/ 8 <0x10>;
+        };
+      };
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        backlight@2c {
+            compatible = "ti,lp8557";
+            reg = <0x2c>;
+            enable-supply = <&backlight_vddio>;
+            power-supply = <&backlight_vdd>;
+
+            dev-ctrl = /bits/ 8 <0x41>;
+            init-brt = /bits/ 8 <0x0a>;
+
+            /* 4V OV, 4 output LED string enabled */
+            rom-14h {
+              rom-addr = /bits/ 8 <0x14>;
+              rom-val = /bits/ 8 <0xcf>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
deleted file mode 100644
index 88f56641fc28..000000000000
--- a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
+++ /dev/null
@@ -1,72 +0,0 @@
-lp855x bindings
-
-Required properties:
-  - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
-                "ti,lp8555", "ti,lp8556", "ti,lp8557"
-  - reg: I2C slave address (u8)
-  - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
-
-Optional properties:
-  - bl-name: Backlight device name (string)
-  - init-brt: Initial value of backlight brightness (u8)
-  - pwm-period: PWM period value. Set only PWM input mode used (u32)
-  - rom-addr: Register address of ROM area to be updated (u8)
-  - rom-val: Register value to be updated (u8)
-  - power-supply: Regulator which controls the 3V rail
-  - enable-supply: Regulator which controls the EN/VDDIO input
-
-Example:
-
-	/* LP8555 */
-	backlight@2c {
-		compatible = "ti,lp8555";
-		reg = <0x2c>;
-
-		dev-ctrl = /bits/ 8 <0x00>;
-		pwm-period = <10000>;
-
-		/* 4V OV, 4 output LED0 string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-
-		/* Heavy smoothing, 24ms ramp time step */
-		rom_15h {
-			rom-addr = /bits/ 8 <0x15>;
-			rom-val = /bits/ 8 <0xc7>;
-		};
-
-		/* 4 output LED1 string enabled */
-		rom_19h {
-			rom-addr = /bits/ 8 <0x19>;
-			rom-val = /bits/ 8 <0x0f>;
-		};
-	};
-
-	/* LP8556 */
-	backlight@2c {
-		compatible = "ti,lp8556";
-		reg = <0x2c>;
-
-		bl-name = "lcd-bl";
-		dev-ctrl = /bits/ 8 <0x85>;
-		init-brt = /bits/ 8 <0x10>;
-	};
-
-	/* LP8557 */
-	backlight@2c {
-		compatible = "ti,lp8557";
-		reg = <0x2c>;
-		enable-supply = <&backlight_vddio>;
-		power-supply = <&backlight_vdd>;
-
-		dev-ctrl = /bits/ 8 <0x41>;
-		init-brt = /bits/ 8 <0x0a>;
-
-		/* 4V OV, 4 output LED string enabled */
-		rom_14h {
-			rom-addr = /bits/ 8 <0x14>;
-			rom-val = /bits/ 8 <0xcf>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
index 5ec47a8c6568..535690288990 100644
--- a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -68,7 +68,6 @@ dependencies:
 required:
   - compatible
   - pwms
-  - power-supply
 
 additionalProperties: false