Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups on various subarchitectures from Olof Johansson:
 "Cleanup patches for various ARM platforms and some of their associated
  drivers.  There's also a branch in here that enables Freescale i.MX to
  be part of the multiplatform support -- the first "big" SoC that is
  moved over (more multiplatform work comes in a separate branch later
  during the merge window)."

Conflicts fixed as per Olof, including a silent semantic one in
arch/arm/mach-omap2/board-generic.c (omap_prcm_restart() was renamed to
omap3xxx_restart(), and a new user of the old name was added).

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (189 commits)
  ARM: omap: fix typo on timer cleanup
  ARM: EXYNOS: Remove unused regs-mem.h file
  ARM: EXYNOS: Remove unused non-dt support for dwmci controller
  ARM: Kirkwood: Use hw_pci.ops instead of hw_pci.scan
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: SAMSUNG: use devm_ functions for ADC driver
  ARM: EXYNOS: no duplicate mask/unmask in eint0_15
  ARM: S3C24XX: SPI clock channel setup is fixed for S3C2443
  ARM: EXYNOS: Remove i2c0 resource information and setting of device names
  ARM: Kirkwood: checkpatch cleanups
  ARM: Kirkwood: Fix sparse warnings.
  ARM: Kirkwood: Remove unused includes
  ARM: kirkwood: cleanup lsxl board includes
  ARM: integrator: use BUG_ON where possible
  ARM: integrator: push down SC dependencies
  ARM: integrator: delete static UART1 mapping
  ARM: integrator: delete SC mapping on the CP
  ARM: integrator: remove static CP syscon mapping
  ARM: integrator: remove static AP syscon mapping
  ...

1 files changed, 87 insertions, 3 deletions

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 8d276584650e..f1bf610e2900 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,3 +1,70 @@
+config ARCH_MXC
+	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
+	select ARCH_REQUIRE_GPIOLIB
+	select ARM_PATCH_PHYS_VIRT
+	select AUTO_ZRELADDR if !ZBOOT_ROM
+	select CLKDEV_LOOKUP
+	select CLKSRC_MMIO
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_IRQ_CHIP
+	select MULTI_IRQ_HANDLER
+	select SPARSE_IRQ
+	select USE_OF
+	help
+	  Support for Freescale MXC/iMX-based family of processors
+
+menu "Freescale i.MX support"
+	depends on ARCH_MXC
+
+config MXC_IRQ_PRIOR
+	bool "Use IRQ priority"
+	help
+	  Select this if you want to use prioritized IRQ handling.
+	  This feature prevents higher priority ISR to be interrupted
+	  by lower priority IRQ even IRQF_DISABLED flag is not set.
+	  This may be useful in embedded applications, where are strong
+	  requirements for timing.
+	  Say N here, unless you have a specialized requirement.
+
+config MXC_TZIC
+	bool
+
+config MXC_AVIC
+	bool
+
+config MXC_DEBUG_BOARD
+	bool "Enable MXC debug board(for 3-stack)"
+	help
+	  The debug board is an integral part of the MXC 3-stack(PDK)
+	  platforms, it can be attached or removed from the peripheral
+	  board. On debug board, several debug devices(ethernet, UART,
+	  buttons, LEDs and JTAG) are implemented. Between the MCU and
+	  these devices, a CPLD is added as a bridge which performs
+	  data/address de-multiplexing and decode, signal level shift,
+	  interrupt control and various board functions.
+
+config HAVE_EPIT
+	bool
+
+config MXC_USE_EPIT
+	bool "Use EPIT instead of GPT"
+	depends on HAVE_EPIT
+	help
+	  Use EPIT as the system timer on systems that have it. Normally you
+	  don't have a reason to do so as the EPIT has the same features and
+	  uses the same clocks as the GPT. Anyway, on some systems the GPT
+	  may be in use for other purposes.
+
+config MXC_ULPI
+	bool
+
+config ARCH_HAS_RNGA
+	bool
+
+config IRAM_ALLOC
+	bool
+	select GENERIC_ALLOCATOR
+
 config HAVE_IMX_GPC
 	bool
 
@@ -5,6 +72,12 @@ config HAVE_IMX_MMDC
 	bool
 
 config HAVE_IMX_SRC
+	def_bool y if SMP
+
+config IMX_HAVE_IOMUX_V1
+	bool
+
+config ARCH_MXC_IOMUX_V3
 	bool
 
 config ARCH_MX1
@@ -104,7 +177,7 @@ config	SOC_IMX51
 	select PINCTRL_IMX51
 	select SOC_IMX5
 
-if ARCH_IMX_V4_V5
+if ARCH_MULTI_V4T
 
 comment "MX1 platforms:"
 config MACH_MXLADS
@@ -133,6 +206,10 @@ config MACH_APF9328
 	help
 	  Say Yes here if you are using the Armadeus APF9328 development board
 
+endif
+
+if ARCH_MULTI_V5
+
 comment "MX21 platforms:"
 
 config MACH_MX21ADS
@@ -384,7 +461,7 @@ config MACH_IMX27_DT
 
 endif
 
-if ARCH_IMX_V6_V7
+if ARCH_MULTI_V6
 
 comment "MX31 platforms:"
 
@@ -649,6 +726,10 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+endif
+
+if ARCH_MULTI_V7
+
 comment "i.MX5 platforms:"
 
 config MACH_MX50_RDP
@@ -756,7 +837,6 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
-	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL
@@ -766,3 +846,7 @@ config SOC_IMX6Q
 	  This enables support for Freescale i.MX6 Quad processor.
 
 endif
+
+source "arch/arm/mach-imx/devices/Kconfig"
+
+endmenu