Merge tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

From Paul Walmsley <paul@pwsan.com> via Tony Lindgren:

Move some of the OMAP2+ CM and System Control Module direct
register accesses into CM- and System Control
Module-specific "drivers" underneath arch/arm/mach-omap2/.  This
is a prerequisite for moving this code out of arch/arm/mach-omap2/ into
drivers/.

Basic test logs are available here:

http://www.pwsan.com/omap/testlogs/cm_scm_cleanup_a_v3.13/20131019101809/

* tag 'omap-for-v3.13/cm-scm-cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP3: control: add API for setting IVA bootmode
  ARM: OMAP3: CM/control: move CM scratchpad save to CM driver
  ARM: OMAP3: McBSP: do not access CM register directly
  ARM: OMAP3: clock: add API to enable/disable autoidle for a single clock
  ARM: OMAP2: CM/PM: remove direct register accesses outside CM code
  + Linux 3.12-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 15 insertions, 39 deletions

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 31e0dfe4a4ea..44bb4d544dcf 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -46,17 +46,7 @@ struct omap3_scratchpad {
 struct omap3_scratchpad_prcm_block {
 	u32 prm_clksrc_ctrl;
 	u32 prm_clksel;
-	u32 cm_clksel_core;
-	u32 cm_clksel_wkup;
-	u32 cm_clken_pll;
-	u32 cm_autoidle_pll;
-	u32 cm_clksel1_pll;
-	u32 cm_clksel2_pll;
-	u32 cm_clksel3_pll;
-	u32 cm_clken_pll_mpu;
-	u32 cm_autoidle_pll_mpu;
-	u32 cm_clksel1_pll_mpu;
-	u32 cm_clksel2_pll_mpu;
+	u32 cm_contents[11];
 	u32 prcm_block_size;
 };
 
@@ -347,34 +337,9 @@ void omap3_save_scratchpad_contents(void)
 	prcm_block_contents.prm_clksel =
 		omap2_prm_read_mod_reg(OMAP3430_CCR_MOD,
 				       OMAP3_PRM_CLKSEL_OFFSET);
-	prcm_block_contents.cm_clksel_core =
-			omap2_cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clksel_wkup =
-			omap2_cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
-	prcm_block_contents.cm_clken_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	/*
-	 * As per erratum i671, ROM code does not respect the PER DPLL
-	 * programming scheme if CM_AUTOIDLE_PLL..AUTO_PERIPH_DPLL == 1.
-	 * Then,  in anycase, clear these bits to avoid extra latencies.
-	 */
-	prcm_block_contents.cm_autoidle_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE) &
-			~OMAP3430_AUTO_PERIPH_DPLL_MASK;
-	prcm_block_contents.cm_clksel1_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
-	prcm_block_contents.cm_clksel3_pll =
-			omap2_cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
-	prcm_block_contents.cm_clken_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
-	prcm_block_contents.cm_autoidle_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
-	prcm_block_contents.cm_clksel1_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
-	prcm_block_contents.cm_clksel2_pll_mpu =
-			omap2_cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+
+	omap3_cm_save_scratchpad_contents(prcm_block_contents.cm_contents);
+
 	prcm_block_contents.prcm_block_size = 0x0;
 
 	/* Populate the SDRC block contents */
@@ -604,4 +569,15 @@ int omap3_ctrl_save_padconf(void)
 	return 0;
 }
 
+/**
+ * omap3_ctrl_set_iva_bootmode_idle - sets the IVA2 bootmode to idle
+ *
+ * Sets the bootmode for IVA2 to idle. This is needed by the PM code to
+ * force disable IVA2 so that it does not prevent any low-power states.
+ */
+void omap3_ctrl_set_iva_bootmode_idle(void)
+{
+	omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+			 OMAP343X_CONTROL_IVA2_BOOTMOD);
+}
 #endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */